INTRODUCTION
ThankyouforselectingtheOregonScientificTM Weather
Station Advanced (BAR628HG / BAR628HGU). This
device bundles precise time keeping, weather forecast,
and indoor and outdoor temperature and humidity
monitoring features into a single tool you can use from
the convenience of your home.
Weather Station Advanced
Model: BAR628HG /
BAR628HGU
In this box, you will find:
•
•
•
•
Main unit
User Manual
Remote sensor (THGR122NX)
Main unit batteries, 3 x UM-3 (AA) 1.5V
Remote sensor batteries, 2 x UM-4 (AAA) 1.5V
CONTENTS
Keep this manual handy as you use your new product.
It contains practical step-by-step instructions, as well as
technical specifications and warnings you should know.
Contents .................................................................. 1
Introduction ............................................................. 1
Product Overview ................................................... 2
Front View ........................................................... 2
Back View ........................................................... 2
LCD Display ........................................................ 3
Remote Sensor (THGR122NX)........................... 3
Getting Started ........................................................ 4
Batteries .............................................................. 4
Change Settings.................................................. 4
Table Stand or Wall Mount.................................. 4
Remote Sensor (THGR122NX) ............................... 4
Setup Sensor ...................................................... 4
Data Transmission .............................................. 5
Search for Sensor ............................................... 5
Clock ........................................................................ 5
Turn Clock ON / OFF .......................................... 5
Set Clock / Calendar ........................................... 5
Switch Clock Display ........................................... 6
Alarm ........................................................................ 6
View Alarm Settings ............................................ 6
Set Alarm ............................................................ 6
Activate Alarm ..................................................... 6
Silence Alarm ...................................................... 6
Weather Forecast .................................................... 6
Temperature and Humidity .................................... 6
Select Temperature Unit ..................................... 6
Select Channel Number ...................................... 6
Minimum / Maximum Records............................. 6
Moon Phase ............................................................. 6
Reset System .......................................................... 7
Safety and Care ....................................................... 7
Warnings .................................................................. 7
Troubleshooting ...................................................... 7
Specifications.......................................................... 7
Main Unit Dimensions ......................................... 7
Remote Sensor Dimensions ............................... 7
Temperature........................................................ 7
Relative Humidity ................................................ 7
Weather Forecast................................................ 7
Remote Sensor (THGR122NX)........................... 7
Clock ................................................................... 7
Power .................................................................. 8
About Oregon Scientific ......................................... 8
Declaration of Conformity ...................................... 8
Download from Www.Somanuals.com. All Manuals Search And Download.
1
LCD DISPLAY
REMOTE SENSOR (THGR122NX)
1
A
2
1
2
3
4
B
5
6
7
8
C
9
10
11
12
13
D
14
15
1. LCD display
2. LED status indicator
A. Weather Forecast Area
B. Outdoor Temperature & Humidity Area
C. Indoor Temperature & Humidity Area
D. Clock / Alarm / Calendar Area
1. Weather display
2. Outdoor humidity
3. Sensor signal
1
4. Low battery icon for sensor
5. Outdoor temperature
6. Indoor humidity
7. Indoor icon
8. Low battery icon for main unit
9. Indoor temperature
10. Time
2
3
11. Radio Frequency (RF) reception icon
12. Alarm activated
13. Alarm setting
4
14. Calendar
15. Moon phase
1. Wall mount hole
2. RESET hole
3. CHANNEL number (1-3)
4. Battery compartment
(Battery compartment cover not shown)
Download from Www.Somanuals.com. All Manuals Search And Download.
3
TABLE STAND OR WALL MOUNT
GETTING STARTED
BATTERIES
Use the stand on the back of the main unit / remote
sensor, or mount it on a wall with a nail.
Batteries are supplied with this product:
To attach the main unit stand:
Main unit 3 x UM-3 (AA) 1.5V batteries
Remote unit
2 x UM-4 (AAA) 1.5V batteries
Insert batteries before first use, matching the polarity
(+ and -) as shown in the battery compartment. For best
results, install batteries in the remote sensor before the
main unit. Press RESET after each battery change.
NOTE Do not use rechargeable batteries.
shows when batteries are low.
To use the main unit wall mount:
NOTE It is recommended that you use alkaline batteries
with this product for longer performance.
UNIT
LOCATION
Main
Indoor Temperature /
Humidity Area
Remote
Outdoor Temperature /
Humidity Area
Installing the batteries:
To use the remote sensor stand or wall mount:
CHANGE SETTINGS
To change, time, calendar and language settings:
REMOTE SENSOR (THGR122NX)
This product is shipped with a THGR122NX Thermo /
Hygro Sensor that collects Temperature and Humidity
data. Data can be collected from up to 3 sensors.
Additional sensors sold separately.
1. Press and hold MODE for 2 seconds to enter setting
mode.
2. Press
or
to change settings. (To reach the
setting you want quickly, press and hold or .)
3. Press MODE to confirm.
SETUP SENSOR
1. Open the remote sensor battery compartment with a
small Phillips screwdriver.
2. Insertthebatteries, matchingthepolarity(+and-)as
shown in the battery compartment.
SWITCH OPTION
Channel Channel 1-3. If you are using more than
one sensor, select a different channel for
each sensor.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
3. Set the channel. The switch is located in the battery
compartment.
SEARCH FOR SENSOR
To search for a sensor, press and hold MEM and
CHANNEL (on the main unit) for 2 seconds.
4. Place the sensor near the main unit. Press RESET
on the sensor. Then, press and hold MEM and
CHANNEL on the main unit to initiate signal sending
between the sensor and the main unit. The reception
icon on the main unit will blink for approximately 3
minutes while it is searching for the sensor. (Refer to
the"DataTransmission"sectionformoreinformation.)
5. Close the remote sensor battery compartment.
6. Secure the sensor in the desired location using the
wall mount or table stand.
NOTE If the sensor is still not found, check the batteries,
obstructions, and remote unit location.
NOTESignalsfromhouseholddevicessuchasdoorbells,
electronic garage doors, and home security systems
may cause temporary reception failure. This is normal
and does not affect general product performance. The
reception will resume once the interference ends.
CLOCK
The clock automatically synchronizes the current time
and date when it is brought within range of the radio
signal DCF77 generated from Frankfurt, Germany for
CentralEurope(modelBAR628HG)orMSF60generated
from Anthorn, England (model BAR628HGU).
NOTE The signals are collected by the main unit when
it is within 1500 km (932 miles) of a signal.
For best results:
Initialreceptiontakes2-10minutes, andisinitiatedwhen
youfirstsetuptheunit, andwheneveryoupressRESET.
Once complete, the reception icon will stop blinking. The
icon is shown in the Clock Area.
•
Insert the batteries and select the channel before
you mount the sensor.
•
•
Placethesensoroutofdirectsunlightandmoisture.
Do not place the sensor more than 30 metres (98
feet) from the main (indoor) unit.
Position the sensor so that it faces the main
(indoor) unit, minimizing obstructions such as
doors, walls, and furniture.
STRONG SIGNAL WEAK SIGNAL
NO SIGNAL
•
•
•
Place the sensor in a location with a clear view to
the sky, away from metallic or electronic objects.
Position the sensor close to the main unit during
coldwintermonthsasbelow-freezingtemperatures
may affect battery performance and signal
transmission.
To force a manual search for clock signals, press and
hold for 2 seconds. If no signal is found, check the
batteries.
TURN CLOCK ON / OFF
You may need to experiment with various locations to
get the best results.
Perform this step if you cannot receive clock signals.
Press and hold for 2 seconds. Then, manually set the
clock following the “Set Clock” instructions (below).
DATA TRANSMISSION
The signal icon indicates that the clock feature is ON.
No icon means that it is OFF.
Data is sent from the sensor(s) every 40 seconds. The
reception icon shown in the Temperature and Humidity
Areas show the status.
SET CLOCK / CALENDAR
ICON
DESCRIPTION
You only need to do this if you have disabled the clock
feature (for example, if you are too far from or cannot
receive a signal).
Main unit is searching for
sensors.
At least 1 channel has been
found.
1. PressandholdMODEfor2seconds.TheClockArea
will blink.
Channel 1 is selected (number
will change depending on the
sensor you select).
2. Selectthehour, minute, year, month, day, anddayof
the week language. Press
setting.
or
to change the
3. Press MODE to confirm.
shows in Outdoor The selected sensor cannot
---
Temp / Humidity Area be found. Search for the
sensor or check batteries.
The language options are (E) English, (F) French, (D)
German, (I) Italian, and (S) Spanish.
Download from Www.Somanuals.com. All Manuals Search And Download.
5
SWITCH CLOCK DISPLAY
SELECT TEMPERATURE UNIT
Press MODE to toggle between Clock with Seconds and
Clock with Weekday display.
Slide the °C / °F switch into the desired location. The
switch is located in the main unit battery compartment.
Thesettingforthemainunitoverridestheremotesensor
setting.
ALARM
This product is equipped with a 2-minute crescendo
alarm.
SELECT CHANNEL NUMBER
Press CHANNEL to switch between sensors 1-3.
The icon shows the selected sensor.
VIEW ALARM SETTINGS
Press
. The alarm time and alarm status will show in
KINETIC-
WAVE
ICON
the Clock Area.
DESIG-
NATED Display Display
DISPLAY
Indoor Remote
Remote
Display
Remote
Display
SET ALARM
1. Press
2. Press and hold
settings will blink.
to switch to alarm display.
Channel 1 Channel 2 Channel 3
again for 2 seconds. The alarm
To auto-scan between sensors, press and hold
CHANNEL for 2 seconds. Each sensor’s data will be
displayed for 3 seconds. To end auto-scan, press
CHANNEL or MEM.
3. Select the hour and minute. Press or to change
settings. Press
to confirm.
ACTIVATE ALARM
NOTE If you use a sensor that collects only temperature
data, humidity will not be shown.
Press to activate or deactivate the alarm. shows in
the Clock / Alarm Area when the alarm is activated.
NOTE For more information on the sensor see “Remote
Sensor THGR122NX” Section.
SILENCE ALARM
When the alarm time is reached, the crescendo alarm
will sound for 2 minutes. To silence the alarm:
MINIMUM / MAXIMUM RECORDS
The MEM button is located in the main unit battery
compartment. Press MEM to toggle between current,
maximum (MAX) and minimum (MIN) records. To clear
the records, press and hold MEM for 2 seconds. A beep
will sound to confirm that the memory has been cleared.
•
Press SNOOZE to silence it for 8 minutes.
OR
•
Press any key except SNOOZE to mute the alarm
and activate it again after 24 hours.
MOON PHASE
The Calendar must be set for this feature to work, see
“Set Clock” section.
If no button is pressed, the alarm will automatically
silence after 2 minutes. It will then sound again after 8
minutes.
•
•
Press or to view the moon phase for the next
or previous day.
Press and hold or to scan quickly through the
years (2001 to 2099).
WEATHER FORECAST
Thisproductforecaststhenext12to24hoursofweather
within a 30-50 km (19-31 mile) radius with 70 to 75
percent accuracy. The weather forecast is always
displayed.
New Moon
Waxing Crescent
First Quarter
SUNNY
PARTLY
CLOUDY
CLOUDY
RAINY
Waxing Gibbous
Full Moon
Waning Gibbous
Last Quarter
TEMPERATURE AND HUMIDITY
Waning Crescent
Thisproductcandisplaycurrent,minimum,andmaximum
temperatures and humidity percentage information
collected by the remote sensors and main (indoor) unit.
Outdoordataiscollectedanddisplayedevery40seconds.
Indoordataiscollectedanddisplayedevery10seconds.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
RESET SYSTEM
SPECIFICATIONS
MAIN UNIT DIMENSIONS
L x W x H
The RESET button is located in the main unit battery
compartment. Press RESET when you change the
batteries and whenever performance is not behaving as
expected (for example, unable to establish radio
frequency link with remote sensor or clock).
116 x 55 x 127 mm
(4.6 x 2.2 x 5 inches)
Weight
186g(6.6ounces)without
battery
SAFETY AND CARE
Clean the product with a slightly damp cloth and alcohol-
free, mild detergent. Avoid dropping the product or
placing it in a high-traffic location.
REMOTE SENSOR DIMENSIONS
L x W x H
92 x 60 x 20 mm
(3.6 x 2.4 x 0.79 inches)
WARNINGS
Weight
63 grams (2.22 ounces)
without battery
This product is designed to give you years of service if
handledproperly.OregonScientificwillnotberesponsible
for any deviations in the usage of the device from those
specified in the user instructions or any unapproved
alterationsorrepairsoftheproduct.Observethefollowing
guidelines:
TEMPERATURE
Unit
°C / °F
Indoor range
Outdoor range
Resolution
-5°C to 50°C
•
•
Never immerse the product in water. This can
cause electrical shock and damage the product.
Do not subject the main unit to extreme force,
shock, or fluctuations in temperature or humidity.
Do not tamper with the internal components.
Do not mix new and old batteries or batteries of
different types.
(23°F to 122°F)
-20°C to 60°C
(-4°F to 140°F)
•
•
0.1°C (0.2°F)
•
•
Donotuserechargeablebatterieswiththisproduct.
Remove the batteries if storing this product for a
long period of time.
RELATIVE HUMIDITY
Range
25% to 95%
1%
•
Do not scratch the LCD display.
Resolution
Memory
NOTE The technical specification of this product and
contents of this user guide are subject to change without
notice. Images not drawn to scale.
Minimum / maximum
WEATHER FORECAST
TROUBLESHOOTING
Display
Rainy, cloudy, partly
cloudy, sunny
PROBLEM SYMPTOM
REMEDY
Calendar
Strange date /
month
Change language
REMOTE SENSOR (THGR122NX)
(➔5)
RF frequency
433 MHz
Clock
Cannot adjust clock Disable clock (➔5)
Cannot auto-
synchronize the
1. Adjust batteries
(➔4)
Range
30 metres (98 feet) with
no obstructions
date and time
2. Press RESET
Transmission
Channel No.
every 40 seconds
1-3
(➔7)
3. Manually activate
clock feature (➔5)
Temp
Shows “LLL” or
“HHH”
Temperature is
out-of-range
CLOCK
Remote
sensor
Cannot locate
remote sensor
Checkbatteries(➔5)
RF Clock
Auto or manual (disabled)
HH:MM:SS
Check location (➔5)
Clock display
Hour format
Cannot change
channel
Checksensors.Only
one sensor is
working (➔5)
12hr AM / PM
(Model BAR628HGU)
24hr (Model BAR628HG)
Data does not
match main unit
Initiate a manual
sensor search (➔5)
Calendar
DD / MM; weekday in
5 languages (E, D, F, I, S)
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Alarm
Single alarm with
2-minute crescendo and
8-minute Snooze
POWER
Main unit batteries
3 x UM-3 (AA) 1.5V
2 x UM-4 (AAA) 1.5V
Sensor batteries
NOTE It is recommended that you use alkaline batteries
with this product for longer performance.
ABOUT OREGON SCIENTIFIC
more about Oregon Scientific products. If you’re in the
US and would like to contact our Customer Care
department directly,
pleasevisit:www2.oregonscientific.com/service/support
OR
Call 1-800-853-8883.
For international inquiries, please visit:
www2.oregonscientific.com/about/international
EU-DECLARATION OF CONFORMITY
Hereby, Oregon Scientific, declares that this Weather
StationAdvanced(Model:BAR628HG/BAR628HGU)is
in compliance with the essential requirements and other
relevantprovisionsofDirective1999/5/EC. Acopyofthe
signed and dated Declaration of Conformity is available
on request via our Oregon Scientific Customer Service.
COUNTRIES RTTE APPROVAL COMPLIED
CH
All EC countries, Switzerland
N
and Norway
Download from Www.Somanuals.com. All Manuals Search And Download.
8
© 2007 Oregon Scientific. All rights reserved.
P/N: 086L003567-069
Download from Www.Somanuals.com. All Manuals Search And Download.
Weather Station Advanced
Model: BAR628HG / BAR628HGU
User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
|