Pause, resume / stop................................................. 12
Taking laps................................................................. 13
Memory.......................................................................... 13
Understanding the displays ....................................... 14
Clear records............................................................. 15
Other operations and settings .................................... 15
Activate alarm............................................................ 15
Activate backlight ...................................................... 15
Beep tone on / off ...................................................... 15
Replace battery ......................................................... 16
Keypad lock............................................................... 16
Install bike mount......................................................... 16
Water resistance........................................................... 17
About the fitness / body mass index ........................ 17
Fitness index ............................................................ 17
Body mass index ....................................................... 18
Specifications............................................................... 19
Precautions................................................................... 20
About Oregon Scientific .............................................. 21
Tap On Elite - Heart Rate Monitor
With Hydration Alert
Model: SH201
USER MANUAL
CONTENTS
Control buttons .............................................................. 2
Display ............................................................................ 2
Starting your watch (first time) ..................................... 3
Set user profile ............................................................... 3
Activity level................................................................. 4
Set watch profile (time / date / alarm)........................... 4
Set exercise program..................................................... 5
General exercise (AUTO) ........................................... 5
Smart Training Program .............................................. 6
Maximum / upper / lower HR Limits............................. 7
Training categories ...................................................... 7
Alert ................................................................................. 8
Dehydration alert ......................................................... 8
Tap on lens...................................................................... 9
Use tap on lens function.............................................. 9
Wearing the chest belt and watch ....................................9
Transmission signal................................................... 10
Start exercising ............................................................ 11
Start taking measurements – General exercise ........ 12
Start taking measurements – pre-programmed
exercise (JOG / RUN / CYCLE)................................. 12
1
Download from Www.Somanuals.com. All Manuals Search And Download.
10.
11.
12.
13.
14.
: displayed data relates to entire exercise period
: lap function activated / lap data is displayed
: memory mode is displayed
to step 4.
: tap on lens function enabled
: target indicator –indicates time till
completion of Smart training program (e.g., if warm-up,
exercise and rest time combined is 50 minutes, each
segment would represent 10 minutes)
15.
/
/
: key press prompt
For normal setting procedure:
STARTING YOUR WATCH (FIRST TIME)
1. Press MODE/- repeatedly to select
,
“SET
Pressandholdall4buttonsatthesametimetoactivatetheLCD
screen. The watch will prompt you to set your user profile.
PROG” will be displayed shortly after.
2. Press ST/SP/+ repeatedly to navigate to “SET USER”.
3. Press SET/ LAP to enter user profile setting options.
IMPORTANT
4. Set user profile according to the following order: gender,
age, weight unit, weight, height unit, height, activity
level, by pressing the following buttons:
•
To ensure accurate calculations with your exercise, you
are strongly recommended to set the watch and user
profiles before exercising.
•
•
•
ST/SP/+ to increase value or toggle options
MODE/- to decrease value or toggle options
SET/LAP to confirm
•
Remember to set the profiles and exercise program
settings after every battery replacement or reset.
NOTE When the watch is left idle for 30 seconds during set
up, it will automatically exit.
Once user profile is set, the watch will automatically
generate a BMI (body mass index) and Fitness index*.
These calculations along with the calorie / fat % burned
and the period you exercised at the correct intensity (within
chosen HR zone / limits) will help you track your progress
over time.
TIP For your added convenience, the watch has been
programmed to exit settings / current mode and return to
default time display upon a simple tap of the screen.
SET USER PROFILE
*For information about BMI / Fitness index, please refer
to “About the fitness / body mass index” section in this
manual.
When prompted to set user profile after starting the watch
for the first time, the screen below will be shown. Go directly
3
Download from Www.Somanuals.com. All Manuals Search And Download.
After your user profile is set, the “SET USER” screen below
will be shown. You can continue setting other profiles (watch
or exercise program) by pressing ST/SP/+ repeatedly.
HOBBY
Medium
–
You are engaged in
modest physical activity (such as
golfing, horseback riding, table tennis,
calisthenics, bowling, weight lifting or
gymnastics) 2-3 times a week, totaling
1 hour per week.
ATHLETE
High
–
You actively and regularly
participate in heavy physical exercise
(such as running, jogging, swimming,
cycling, or skipping rope) or engage
in vigorous aerobic exercise (such as
tennis, basketball or handball).
ST/SP+
ST/SP+
NOTE You must enter the activity level to calculate the
calories burned and fitness index.
ST/SP+
TIP As you progress, update weight and activity level to
help the watch give you an up-to-date reflection of your
physical condition.
ACTIVITY LEVEL
The activity level is based on your own self-assessment of
the amount of exercise you regularly perform.
SET WATCH PROFILE (TIME / DATE / ALARM)
1. Press MODE/- repeatedly to select
,
“SET
PROG” will be displayed shortly after.
ACTIVITY LEVEL DESCRIPTION
2. Press ST/SP/+ repeatedly to navigate to “SET
LITTLE
Low – You do not usually participate
in programmed recreation sports or
exercise.
WATCH”.
3. Press SET/LAP to enter watch profile setting options.
4. Press ST/SP/+ repeatedly to select the option to set:
alarm, time, date.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
For example, if you are running, your exercise program
settings are likely to differ from those you would use when
cycling. Also, the time you require to warm-up and complete
an exercise will vary. That is why you can change the warm-
up and exercise countdown time to suit you.
ST/SP+
ST/SP+
GENERAL EXERCISE (AUTO)
This function is suited for situations when you are unsure
how long your activity will take.
1. Press MODE/- repeatedly to select
.
MODE/-
SET/LAP
ST/SP+
5. Press SET/LAP and start setting the selected option by
2. Press SET/LAP to enter (SET PROG) exercise program
pressing the following buttons:
setting options.
•
•
•
ST/SP/+ to increase value or toggle options
MODE/- to decrease value or toggle options
SET/LAP to confirm
3. Press SET/LAP to enter (SET AUTO) settings. The
screen below will be shown.
6. Repeat steps 4-5 for all setting options.
will appear when alarm has been enabled.
SET EXERCISE PROGRAM
To achieve balanced fitness, you may wish to do a variety
of exercises for different parts of the body and at varying
intensities. To accommodate this, the exercise program
can be set to suit different activities, from pre-programmed
exercises such as jogging, running and cycling to general
exercise with no specific time schedule or planning.
(Choose either option A or B below. See “Maximum / Upper
/ Lower HR limits” section in this manual <below> for more
details).
5
Download from Www.Somanuals.com. All Manuals Search And Download.
A. To use pre-programmed heart rate limits:
i. Press SET/LAP.
1. Press MODE/- repeatedly to select
.
MODE/-
SET/LAP
ST/SP/+
ii. Press ST/SP/+ or MODE/-
to select HR zone (50-60%;
61-70%; 71-80%; 81-90%;
91-100%), then press
2. Press SET/LAP to enter (SET PROG) exercise program
SET/LAP to confirm.
setting options.
Option B allows you to manually change your upper and
lower heart rate limit if the pre-programmed setting does not
suit you or the type of exercise you are doing.
3. Press ST/SP/+ repeatedly to navigate to “SET EX
PROG” then press SET/LAP to enter settings.
4. Press ST/SP/+ repeatedly to select type of exercise
(jog, run, cycle) and press SET/LAP.
B. To define heart rate limits manually:
(Choose either option A or B below, then continue to step
i.
Press ST/SP/+ to toggle to
“SET HR LIMIT”, then press
SET/LAP.
5).
A. To use pre-programmed heart rate limits:
ii. Press ST/SP/+ or MODE/-
to input lower HR limit then
press SET/LAP to confirm.
i.
Press SET/LAP.
ii. Press ST/SP/+ or MODE/- to
select HR zone (50-60%;
61-70%; 71-80%; 81-90%;
91-100%), then press
SET/LAP.
iii. Press ST/SP/+ or MODE/- to
input upper HR limit then
press SET/LAP to confirm.
SMART TRAINING PROGRAM
Option B allows you to manually change your upper and
lower heart rate limit if the pre-programmed setting does not
suit you or the type of exercise you are doing.
The watch has a pre-programmed exercise option, the Smart
Training Program, which enables you to complete exercise
cycles effectively. It will guide you through from a “warm-up”
session to the “end of your exercise” program. In addition to
monitoring your heart rate and alerting you whenever you
fall out of the HR range for the selected training zone, the
program allows you to check the calories burned and the
percentage of fat burned.
B. To define heart rate limits manually:
i.
Press ST/SP/+ to toggle to
“SET HR LIMIT”, then press
SET/LAP.
ii. Press ST/SP/+ or MODE/- to
input lower HR limit then
Download from Www.Somanuals.com. All Manuals Search And Download.
6
press SET/LAP to confirm.
Lower limit
Upper limit
Type of activity
iii. Press ST/SP/+ or MODE/- to
input upper HR limit then
50% x MHR 60% x MHR
61% x MHR 70% x MHR
71% x MHR 80% x MHR
81% x MHR 90% x MHR
Moderate Activity
Weight Management
Aerobic Zone
press SET/LAP to confirm.
Anaerobic Threshold Zone
91% x MHR 100% x MHR Red Line Zone (Maximum
capacity)
5. Continue to set the following setting options: warm-up
time, exercise time, rest on/off, dehydration or target
indicator, by pressing the following buttons:
The most common zone range is from 50% to 80% of
your Maximum Heart Rate. This is where you achieve
cardiovascular benefits, burn fat and become more fit.
•
•
•
ST/SP/+ to increase value or toggle options
MODE/- to decrease value or toggle options
SET to confirm
Repeat steps 4-5 for all programs (jog / run / cycle).
TRAINING CATEGORIES
There are three categories of training as described in the
table below:
MAXIMUM / UPPER / LOWER HR LIMITS
To help achieve maximum health benefits from your workout
program, it is important to know your:
Training
Category
MHR %
Description
•
•
•
Maximum Heart Rate (MHR)
Upper heart rate limit
Health
Maintenance
65 – 78%
This is the lowest training
intensity level. It is good for
beginners and those who
want to strengthen their
cardiovascular systems.
Lower heart rate limit
MHR is expressed in beats per minute. You can get your
MHR from an MHR test, or you can estimate it by using the
following formula:
Aerobic
Exercise
65-85%
Increases strength and
endurance. It works
within the body’s oxygen
intake capability, burns
more calories and can be
maintained for a long period
of time.
220 – age = MHR
The watch is pre-programmed with
5
HR target zone
options, each with its lower and upper heart rate limit, as
listed in the table below:
7
Download from Www.Somanuals.com. All Manuals Search And Download.
option. For details of target zone, refer to “Maximum / Upper
/ Lower HR limits” section in this manual.
Anaerobic
Exercise
78-90%
Generates speed and
power. It works at or above
the body’s oxygen intake
capability, builds muscle and
cannot be maintained for a
long period of time.
To activate / deactivate alert:
1. Press MODE/- repeatedly to select , “SET PROG” will
be displayed shortly after.
2. Press SET/LAP to enter exercise program setting
The upper and lower heart rate limits are calculated by
multiplying your MHR by the percentages of the selected
training category.
options. “SET AUTO” will be displayed shortly after.
3. Press ST/SP/+ repeatedly to navigate to “SET ALERT”
then press SET/LAP to enter settings.
4. Press ST/SP/+ or MODE/- to turn alert ON / OFF.
For example:
When alert has been enabled, an audio alert and
A 40-year-old training for basic health maintenance:
•
•
His upper heart rate limit [220 - 40(age)] x 78%
His lower heart rate limit [220 - 40(age)] x 65%
or
will flash when you have surpassed your heart
rate limit.
NOTE Sound alert will only be activated if alert setting is
ON and during exercise (when stopwatch is running).
IMPORTANT Always warm up before exercise and select
the training category that best suits your physique. Exercise
regularly, 20 to 30 minutes per session, three to four times a
week for a healthier cardiovascular system.
ICON
DESCRIPTION
Heart rate sound alert is ON.
WARNING Determining your individual training category
is a critical step in the process towards an efficient and
safe training program. Please consult your doctor or health
professional to help you determine exercise frequency and
duration appropriate for your age, condition and specific
goals.
•
1 beep = you have gone below
your lower HR limit
•
2 beeps = you have gone above
your upper HR limit
To silence alert: Press any key.
ALERT
DEHYDRATION ALERT
* During exercise, when the heart rate is out of the target
zone, the watch will send out visual and/or sound alerts. You
can choose to turn the sound alert on/off in the “SET ALERT”
During exercise your body loses water, most noticeably in
the form of perspiration. Water makes up 60% of an adult’s
body and performs many critical functions. Water can boost
Download from Www.Somanuals.com. All Manuals Search And Download.
8
endurance during prolonged exercise and keep the body
performing at optimal levels.
USE TAP ON LENS FUNCTION
To activate / deactivate Tap on Lens function:
This watch intelligently processes your information, exercise
intensity, and duration to remind you, at the appropriate
time, the need to rehydrate.
1. Press SET/LAP twice. Display will show “ON / OFF
TAP ON LENS”.
2. Press ST/SP/+ to toggle ON/OFF.
The bar icon
is made up of 5 segments.
3. Press SET/LAP to confirm selection.
When the user should rehydrate by drinking 1 portion
of liquids (approx. 120-240 ml / 4-8 ounces), this will be
conveyed by 1 segment disappearing from right to left.
indicates tap on lens function is activated.
To use the tap on lens:
NOTE The missing segment will not reappear after the user
Simply tap with fingernail on the lens to start the preset
exercise program or take laps.
has replenished the body with liquids.
TAP ON LENS
WEARING THE CHEST BELT AND WATCH
Chest belt
The tap on lens feature gives you easy access to 1 of 4
exercise programs.
The chest belt counts your heartbeat and transmits this data
to the watch.
To select the type of exercise:
1. Wet the conductive pads on the underside of the chest
belt with a few drops of
1. Press MODE/- repeatedly to select
, “SET
PROG” will be displayed shortly after.
water or conductive gel to
ensure solid contact.
2. Press SET/LAP to enter exercise program setting
options. “SET AUTO” will be displayed shortly after.
2. Strap the heart rate chest belt
across your chest. To ensure
an accurate heart rate signal,
adjust the strap until the belt
sits snugly below your pectoral
muscles.
3. Press ST/SP/+ repeatedly to navigate to “SET TAP ON
LENS” then press SET/LAP to enter settings.
4. Press ST/SP/+ to select ON and press SET/LAP to
confirm.
5. Press ST/SP/+ or MODE/- to select exercise program
(JOG, RUN, CYCLE) or general exercise monitoring
(AUTO).
TIPS
•
•
The position of the chest belt affects its performance.
Avoid areas with dense chest hair.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
•
In dry, cold climates, it may take several minutes for
the chest belt to function steadily. This is normal and
should improve with several minutes of exercise.
TRANSMISSION SIGNAL
The heart rate chest belt and watch have a maximum
transmission range of about 62.5 centimeters (25 inches).
They are equipped with the latest digital coding system to
reduce signal interference from the environment, as well
as analog technology. For more accurate readings use the
digital transmission signal. You should only switch to the
analog transmission signal if the situation in point 2 occurs
(see below).
NOTE To maintain the best performance of your chest belt,
please handle it with care according to the following:
•
•
•
•
•
Do not wrap the chest belt in a wet towel nor with other
wet materials.
Do not store the chest belt in a hot (about 50°C) and
humid (about 90%) environment.
Do not place or wash the chest belt under running
water, instead clean it with a wet cloth.
NOTE Whenever the watch is searching for the chest belt
signal (manual or automatic search), make sure that the chest
belt is no further than 10 cm (4 inches) from the watch.
Do not place the conductive rubber face down on a
metal table or surface.
Your watch will advise you which system it is using and the
signal status by displaying the following icons:
Properly dry the chest belt immediately after use.
Watch
Icon
Description
You can wear the receiver watch on your wrist or strap it to
a bike or exercise machine, as shown below.
Searching for a signal
Outside and
inside heart flashing
A signal has been found and the
digital system is being used
Inside heart is
flashing
A signal has been found and the
analog system is being used
Heart is flashing
No signal has been found
HR - -
The signal search will take approximately 10 seconds. If
after 10 seconds the heart icon is not flashing, then your
signal search has been unsuccessful and you need to force
another signal search.
For first installation of bike mount, refer to “Install bike
mount” section in this manual.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
NOTE To switch from digital to
analog or analog to digital system,
press the chest belt button for
more than 4 seconds and then
force a signal search.
3. Interference from another person’s heart rate monitor
- their heart rate readings appear on your watch, or the
heart rate monitor shows “0”:
•
Press the chest belt button to get the watch to
receive your chest belt signal. Do not press and
hold the chest belt button, as it will change the
transmission signal from digital to analog.
4. The signal is jammed - the heart rate reading on your
watch is flashing:
IMPORTANT If “HR ---“ is displayed because no signal
has been found, press and hold MODE/- to force a signal
search.
•
There is too much interference in the environment
for your heart rate monitor to function. Move to an
area where the heart rate reading stops flashing.
In the event that you experience a weak signal or your signal
is disrupted by interference in the environment, follow the
instructions below to identify and resolve the situation.
WARNING Signal interference in the environment can be
caused by electromagnetic disturbances. These may occur
near high voltage power lines, traffic lights, overhead lines
of electric railways, electric bus lines or trams, televisions,
car motors, bike computers, some motor driven exercise
equipment, cellular phones or when you walk through
electric security gates. Under interference, the heart rate
reading may become unstable and inaccurate.
1. The signal is weak - the watch heart rate monitor will
only show “0”:
•
Shorten the distance between the heart rate chest
belt and watch.
•
•
Re-adjust the position of the heart rate chest belt.
Check the conductive pads are moist enough to
ensure solid contact.
NOTE If the watch is kept idle without receiving a heart rate
signal for half a minute, the heart rate mode will quit and
return to clock mode.
•
•
Check the batteries. If they are low or exhausted,
the transmission range may be shortened.
Press and hold MODE/- to force a signal search.
START EXERCISING
2. The gym equipment does not seem to work with your
chest belt and the digital icon is displayed:
Most gym equipment is compatible with the analog
system . Press and hold the chest belt button
Before you start exercise, allow the watch a few seconds to
search for chest belt first. This is to ensure you can receive
comprehensive calculations (such as your lap, calorie and
heart rate) during exercise.
•
for more than 4 seconds to change from digital to
analog. Then press and hold MODE/- to force a
signal search.
Ensure HR zone or limits have been set and if doing pre-
programmed exercise, that the time conditions have been set.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
displayed shortly after.
NOTE You can view the time while exercising. Press
2. Press ST/SP/+ to toggle to exercise options (EX PROG)
MODE/- to view time.
and press SET/LAP to confirm.
3. Press ST/SP/+ to choose exercise program (jog, run,
cycle), then press SET/LAP to confirm selection. The
screens below will be shown.
START TAKING MEASUREMENTS –
GENERAL EXERCISE
TIP Skip to step 3 if tapping on lens with fingernail (if
is displayed and is programmed for general exercise ‘AUTO’
option).
1. Press MODE/- to select
.
“AUTO” will be
displayed shortly after.
2. Press SET/LAP to confirm.
4. Press and hold MODE/- to search for HR signal. Ensure
and digits are displayed.
5. Press ST/SP/+ to start warm-up timer.
TIP If you don’t want to finish an exercise sequence (warm-
up, exercise, rest), press and hold SET/LAP at any time to
skip to the next sequence.
3. Press and hold MODE/- to search for HR signal. Ensure
and digits are displayed.
4. Press ST/SP/+ to start taking measurements.
PAUSE, RESUME / STOP
If you need to take a break during exercise, press ST/SP/+.
START TAKING MEASUREMENTS – PRE-
PROGRAMMED EXERCISE (JOG / RUN / CYCLE)
TIP Skip to step 4 if tapping on lens with fingernail (if
is
displayed and is programmed for desired exercise option).
1. Press MODE/- to select
.
“AUTO” will be
Download from Www.Somanuals.com. All Manuals Search And Download.
12
NOTE For your convenience, the display will automatically
toggle between record number with details and the time and
date it was recorded.
When ready, press ST/SP/+ to resume exercise.
To stop exercise and save data: Press ST/SP/+ to pause,
then press MODE/-.
3. Press SET/LAP, “VIEW SUMMA” will be displayed.
To stop exercise without saving data: Press ST/SP/+ to
4. Press ST/SP/+ to select type of records to be displayed,
“VIEW SUMMA (Summary) or “VIEW LAPS” (individual
lap), then press SET/LAP to start viewing.
pause, then press and hold ST/SP/+.
During a long pause and watch has timed out, the watch
will lose connection with the chest belt. Hence, once you
resume exercise, follow through steps above to start taking
measurements for either general exercise / smart training
program.
ST/SP/+
TAKING LAPS
Press SET/LAP or tap on lens with fingernail (if
is
displayed) when stopwatch is running.
MEMORY
SET/LAP
1. Press MODE/- repeatedly to select
.
After 2
5. Press ST/SP/+ to toggle through screens.
seconds, display will show the record for the most recent
exercise done or “NO RECORD” if there is no data.
After viewing, press MODE/- to return to Step 4 and select
the other memory display option for that record.
2. Press ST/SP/+ to navigate to desired record.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE Option of viewing individual lap records can only be
Record summary:
selected if laps were taken for that exercise record.
NOTE For your convenience, the display will automatically
toggle between lap number with time taken to complete lap
and the relevant heart rate information.
Total time taken for entire
exercise
Number of laps completed
Total fat burned
Total calories burned
UNDERSTANDING THE DISPLAYS
Individual lap information:
Average heart rate
Maximum heart rate
Minimum heart rate
Time taken to complete lap
Lap Number
Effectiveness of training:
Amount of time when heart rate
was within target zone (achieved
intended results)
Average heart rate during that lap
Maximum heart rate during that
lap
Minimum heart rate during that
lap
Download from Www.Somanuals.com. All Manuals Search And Download.
14
When memory is full, “MEM FULL” will be displayed,
followed by “CLEAR MEM”.
Effectiveness of training:
Amount of time when heart rate
exceeded the target zone
•
Press and hold SET/LAP to delete all records.
OR
•
Press SET/LAP to ignore and start an exercise without
recording data for it.
Effectiveness of training:
OTHER OPERATIONS AND SETTINGS
Amount of time when heart rate
fell below the target zone
ACTIVATE ALARM
To set daily alarm, refer to “Set watch profile” above.
To activate / deactivate alarm:
1. Press SET/LAP. Display will show “ALARM ON/OFF”.
2. Press ST/SP/+ to toggle ON/OFF.
CLEAR RECORDS
This watch can contain data for up to 99 laps. Individual
memory cannot be selected and deleted. The watch only
allows for all data to be deleted.
3. Press SET/LAP to confirm selection.
To delete memory:
ACTIVATE BACKLIGHT
Press MODE/- repeatedly to select
SP/+ until “CLEAR MEM” is displayed. Press and hold SET/
LAP to delete all records.
, then press ST/
Press
/
. (Press any key to extend backlight for
another 3 seconds).
NOTE The backlight function will not operate if “
”
is displayed.
SET/LAP
BEEP TONE ON / OFF
Press ST/SP/+ to activate / deactivate beep tone.
indicates beep tone is deactivated.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Use a coin to open the battery compartment lid by
turning it anticlockwise.
REPLACE BATTERY
If the battery power of your watch or chest belt is low, the
watch will display:
2. Remove the old battery and insert a new CR2032, 3V
lithium battery.
Watch
3. Secure the lid by turning the coin clockwise.
Chest belt
“HR BELT LO BATT”
IMPORTANT Remember to set the profiles after every
battery replacement or reset.
To replace watch battery:
KEYPAD LOCK
Press and hold
/
to lock or unlock keypad.
KEY LOCKED indicates keypad is locked.
INSTALL BIKE MOUNT
1. Clasp the bike mount onto a bike or exercise machine.
1. Useasmallscrewdrivertoopenthebatterycompartment
lid.
2. Remove the old battery and insert a new CR2032, 3V
lithium battery.
3. Secure the lid by screwing it back into place.
To replace the chest belt battery:
Download from Www.Somanuals.com. All Manuals Search And Download.
16
2. Insert the nylon cord to secure the bike mount according
to the diagrams below.
WATER RESISTANCE
ITEM
WATER RESISTANCE
Watch
50 metres (164 feet)
This means you can use the watch for
swimming or other water sport activities
(such as surfing) but it must not be used for
snorkelling and deep water diving.
NOTE
• Ensure the buttons and battery
compartment are secured and intact
before exposing the watch to excessive
water.
3. Fix the watch onto the bike mount.
• Avoid pressing the buttons while in the
water or during heavy rainstorms, as this
may cause water to enter the watch,
leading to malfunction.
Chest
belt
10 metres (32.8 feet)
Not recommended to use for swimming.
NOTE Even if both the watch and the chest belt are water
resistant, as radio signals do not carry in water, signal
transmission between the watch and chest belt will still be
impossible in water.
ABOUT THE FITNESS / BODY MASS INDEX
FITNESS INDEX
Your watch will generate a fitness index based on your
aerobic fitness. This index is dependent and limited by the
body’s ability to deliver oxygen to the working muscles in
17
Download from Www.Somanuals.com. All Manuals Search And Download.
training. It is often measured by maximum oxygen uptake
(VO2 Max), which is defined as the highest amount
of oxygen that can be utilized when exercising at an
increasingly demanding level. The lungs, heart, blood,
circulatory system, and working muscles are all factors in
determined VO2 Max. The unit of VO2 Max is ml/kg min.
BODY MASS INDEX
Your body mass index is a measurement of the relative
percentages of fat and muscle mass in the human body.
HEALTH
BMI
DESCRIPTION
INDICATION
RANGE
See the tables below for a rough guide to what your fitness
index means:
Underweight
Less than Your body weight is
20.0
currently lower than
average. Work toward
healthy, regular food intake
and exercise routine to
build up your health to
recommended levels.
Recommended 20.0 to
25.0
Your health is at the
recommended level.
Maintain a balanced diet
and exercise to keep your
current level of health.
Fitness index
Overweight
Obese
25.1 to
29.9
Your body weight may be
above normal. Increase
your exercise and work out
a diet plan to lower your risk
for serious illness.
30.0 or
greater
At this level, you may be at
risk for heart disease, high
blood pressure, and other
illnesses. Consult with your
doctor to develop a proper
health and fitness plan.
Fitness index
Download from Www.Somanuals.com. All Manuals Search And Download.
18
NOTE BMI should not be used as a guideline for health
risks for the following groups:
TRAINING
Warm-up time range
Exercise time range
00:00 / 00:05 / 00:10 / 00:15
GROUP
REASON
00:00:00 to 99:59:59 and 00:30
/ 01:00 / 01:30
Children and teenagers
BMI ranges are only based
on adult heights.
Rest time
On / off
Athletes and body builders BMI does not differentiate
between fat and muscle,
Target heart rate
zone
51-60%; 61-70%; 71-80%; 81-
90%; 91-100%
thus making it inaccurate
Lower heart rate
limit range
30 to 220 bpm
for persons with high
muscle volumes.
Upper heart rate
limit range
80 to 240 bpm
Pregnant or nursing
women
This group generates
naturally high fat reserves
as part of the pregnancy.
Maximum lap count
Calorie range
99
People over the age of 65
Fat reserves naturally tend
to be higher with older
persons.
0 to 9,999 kcal
0 to 100%
Fat burn percentage
range
Fitness index range
POWER
1 to 66
NOTE The above BMI information is based on average
Caucasian physique.
Watch
1 x CR2032 3V lithium battery
1 x CR2032 3V lithium battery
SPECIFICATIONS
CLOCK
Chest belt
OPERATING ENVIRONMENT
Operating
temperature
For watch:
0˚C to 40˚C (32˚F to 104˚F)
Time format
12/24 hour format with hour /
minute / second
For chest belt:
5˚C to 40˚C (41˚F to 104˚F)
Date format
Year range
Alarm
DD/MM or MM/DD
2009-2058
Daily
Storage temperature
For watch and chest belt:
-20˚C to 60˚C (-4˚F to 140˚F)
19
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
Do not touch the exposed electronic circuitry, as there
is a danger of electric shock.
PRECAUTIONS
To ensure you use your product correctly and safely, read
these warnings and the entire user manual before using the
product:
Check all major functions if the device has not been
used for a long time. Maintain regular internal testing
and cleaning of your device. Have your watch serviced
by an approved service center annually.
•
Use a soft, slightly moistened cloth. Do not use abrasive
or corrosive cleaning agents, as these may cause
damage. Use luke warm water and mild soap to clean
the watch and chest belt thoroughly after each training
session. Never use the products in hot water or store
them when wet.
•
When disposing of this product, ensure it is collected
separately for special treatment and not as normal
household waste.
•
•
Due to printing limitations, the displays shown in this
manual may differ from the actual display.
•
•
Do not bend or stretch the transmitter part of the chest
belt.
The contents of this manual may not be reproduced
without the permission of the manufacturer.
Do not subject the product to excessive force, shock,
dust, temperature changes, or humidity. Never expose
the product to direct sunlight for extended periods. Such
treatment may result in malfunction.
NOTE The technical specifications for this product and the
contents of the user manual are subject to change without
notice.
•
•
Do not tamper with the internal components. Doing
so will terminate the product warranty and may cause
damage. The main unit contains no user-serviceable
parts.
NOTE Features and accessories will not be available in all
countries. For more information, please contact your local
retailer.
Do not scratch hard objects against the LCD display as
this may cause damage.
•
•
Take precautions when handling all battery types.
Remove the batteries whenever you are planning to
store the product for a long period of time.
•
•
When replacing batteries, use new batteries as specified
in this user manual.
The product is a precision instrument. Never attempt
to take this device apart. Contact the retailer or our
customer service department if the product requires
servicing.
Download from Www.Somanuals.com. All Manuals Search And Download.
20
ABOUT OREGON SCIENTIFIC
about Oregon Scientific products.
If you’re in the US and would like to contact our Customer
Care department directly, please visit:
www2.oregonscientific.com/service/support.asp
For international inquiries, please visit:
www2.oregonscientific.com/about/international.asp
21
Download from Www.Somanuals.com. All Manuals Search And Download.
|