Oregon Scientific Fitness Electronics PE830 User Manual

Pedometer with PC Download  
Model: PE830  
User Manual  
1
2006.8.16, 5:40 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Alarm .......................................................................... 8  
Exercise Schedule Reminder .................................. 8  
Connecting to your PC ............................................. 9  
Backlight / Keypad Lock / Reset ............................. 9  
Batteries .................................................................. 10  
Precautions ............................................................. 10  
Specifications .......................................................... 11  
About Oregon Scientific .......................................... 11  
EU-Declaration of Conformity ............................... 12  
Pedometer with PC Download  
Model: PE830  
USER MANUAL  
CONTENTS  
Introduction ............................................................... 1  
Overview .................................................................... 2  
Front View ................................................................ 2  
Back View ................................................................ 2  
LCD .......................................................................... 3  
Getting Started .......................................................... 3  
Set Up ...................................................................... 3  
Important for Accuracy ............................................. 3  
Useful Tips ............................................................... 4  
Clock / User Profile ................................................... 4  
INTRODUCTION  
TM  
Thank you for selecting this Oregon Scientific  
pedometer. This unique product is ideal for monitoring  
your exercise routine. The pedometer counts the number  
of steps taken from one location to another, calculating  
the total distance covered and calories expended. This  
information can be downloaded onto your PC using  
SmartSync software.  
st  
To Set the User Profile for 1 Time Use or After  
a Battery Change ..................................................... 4  
Change Individual Clock or User Profile Settings .... 5  
Switching Between Operation Modes ..................... 5  
Daily ........................................................................... 5  
Target ......................................................................... 6  
Timer .......................................................................... 6  
Memory ...................................................................... 7  
View Total Weekly Records ..................................... 7  
View Daily Records .................................................. 7  
Clear All Records ..................................................... 8  
Please keep this manual handy as you use your new  
product. It contains practical step-by-step instructions, as  
well as technical specifications and warnings you should  
know.  
IMPORTANT The measurement functions built into the  
PE830 are not meant to substitute professional  
measurement or industrial precision devices. Values  
produced by this unit should be considered as reasonable  
representations only.  
1
PE830_EU_M_EN_R1.p65  
1
2006.8.16, 4:47 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OVERVIEW  
BACK VIEW  
FRONT VIEW  
3
4
1
2
1. MODE/SET button  
2. USB connection port  
3. Base USB connector  
1. Belt clip  
2. USB connection port  
3.  
/
button  
4.  
/
button  
4. Battery door  
5. RESET /  
/
/
button  
2
PE830_EU_M_EN_R1.p65  
2
2006.8.16, 4:47 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LCD  
GETTING STARTED  
SET UP  
5
You must set up the device (as shown below) when you  
first activate the unit, reset it or change the batteries, or  
your pedometer will not work properly.  
1
2
3
4
1. To activate the device, pull out the insulation tape  
underneath the battery cover.  
2. Set the clock and user profile (see Clock / User Profile  
section).  
3. Attach the pedometer to your belt or training attire at  
waist level. Secure it at horizontal position. Improper  
positioning may result in incorrect data collection.  
6
7
8
9
1. Shows when in Target Mode  
2. Shows when in Timer Mode and flashes when you  
are in another display and timer is running  
3. Shows when keypad lock is enabled  
4. Shows when alarm is activated  
5. Shows when in Timer Mode  
6. Shows value of step, distance and calorie, clock /  
alarm time, timer and user profile  
7. Shows when in 7-day Memory Mode  
8. Colored bar shows the memory weekday and target  
IMPORTANT FOR ACCURACY  
status  
The following conditions may cause incorrect reading  
of steps taken:  
9. Dot matrix shows various icons to indicate the mode  
/ display you are in  
1. Uneven walking pace, such as walking in crowded  
areas or on uneven floor.  
2006.8.16, 4:47 PM  
3
PE830_EU_M_EN_R1.p65  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. Frequent up and down movements, such as standing  
1. The first setting will  
flash.  
up and/or sitting down; running, jumping, or  
ascending/descending stairs or steep slopes.  
USEFUL TIPS  
When changing settings you can:  
2. Press  
/
to change a value and SET to confirm  
Press and hold  
options.  
/
to speed through the setting  
and move on to the next setting.  
3. The setting sequence is:  
Press SET to bypass or confirm a setting and move  
on to the next one.  
CLOCK  
During setting mode, if a key is not pressed within  
12/24hr format  
30 seconds, there will be a beep sound and the screen  
will return to the previous mode.  
Hour  
Minute  
Day of the week  
CLOCK / USER PROFILE  
USER PROFILE  
When the installation tape is removed to SaTctivate the  
TO SET THE USER PROFILE FOR 1 TIME  
Weight unit  
Weight  
Stride unit  
Stride  
USE OR AFTER A BATTERY CHANGE  
pedometer and whenever the batteries are changed, the  
pedometer will ask you to set the clock and user profile.  
Please complete the settings as shown below or your  
pedometer will not work properly.  
Age  
Gender  
To calculate stride length:  
Individual stride length varies. Input an appropriate length  
for an average stride. To determine the average stride  
4
PE830_EU_M_EN_R1.p65  
4
2006.8.16, 4:47 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
length, walk 10 paces and divide the distance traveled  
by 10.  
Timer  
7-day Memory  
User Profile  
Clock  
The modes are described in the sections that follow.  
DAILY  
To view the step, distance and calorie display:  
1. Press  
MODE  
to  
CHANGE INDIVIDUAL CLOCK OR USER  
PROFILE SETTINGS  
navigate to Daily Mode.  
If after the initial setting of the clock / user profile (as  
detailed in previous section), you wish to change the clock  
time or edit one of the user profile settings, simply:  
2. Press to switch between the 3 displays;  
1. Press MODE to navigate to Clock or User Profile  
Mode.  
STEP  
2. Profile Mode only – use  
/
to scroll to the setting  
you wish to change.  
3. Press and hold SET to enter setting mode.  
4. Press  
/
to change a value and SET to confirm.  
DISTANCE  
SWITCHING BETWEEN OPERATION MODES  
Press MODE to switch between the 6 operation  
modes:  
Daily  
PE830_EU_M_EN_R1.p65  
Target  
5
5
2006.8.16, 4:47 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CALORIE  
been set, start walking  
to activate the  
pedometer. The GO!  
screen will appear to  
confirm that the unit is  
starting to monitor  
your progress.  
TARGET  
2. While you are walking, the ESTIMATED FINISH TIME  
(EFT) will periodically appear to advise you how long  
it will take to complete your target, based on your  
current pace. The target bar at the bottom of the  
display will move from left to right (start to finish) to  
show your progress.  
To set step, distance or calorie target:  
1. Press MODE to  
navigate to Target  
Mode.  
3. Press  
to toggle between the EFT and remaining  
steps, distance or calories left until target is reached.  
4. When target walk is  
complete, FINISH will  
appear and a beep will  
sound.  
2. Press and hold SET  
for 2 seconds to enter  
setting mode.  
3. Press  
/
to select STEP, DISTANCE or  
5. To reset the target for the next user session, press  
CALORIES.  
and hold RESET.  
4. Press SET to confirm.  
5. Press  
/
to change the value of each digit, and  
TIMER  
SET to confirm and move on to the next setting.  
When the timer is running, it will measure steps, distance  
To use target:  
and calories. These measurements are not linked to the  
daily measurements and are only related to the time spent  
walking while the timer is on.  
1. Once the target has  
6
PE830_EU_M_EN_R1.p65  
6
2006.8.16, 4:47 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To set timer:  
VIEW TOTAL WEEKLY RECORDS  
1. Press MODE to  
navigate to Timer  
Mode.  
1. Press MODE to  
navigate to Memory  
Mode.  
2. Press and hold SET for 2 seconds to enter setting mode.  
2. Press  
to toggle between the total weekly step,  
3. Press  
To use timer:  
/
to select countdown or count-up timer  
distance and calorie display.  
and press SET. If the countdown timer is selected  
you will need to set the hr:min:sec by pressing  
/
VIEW DAILY RECORDS  
to change a value and SET to confirm.  
1. Press MODE to navigate to Memory Mode.  
2. Press  
to enter the daily record display.  
Press  
to start / stop the timer.  
3. Press repeatedly until you reach the day you wish  
to view. When you have selected the day you wish to  
view, a 1-second display will show to advise you if  
you reached that day’s target or not:  
Press and hold  
to reset the timer.  
Press repeatedly to view timer step, distance and  
calories values.  
Target achieved =  
smiley face and high  
beep sound.  
When you are in the timer display, will show. If  
you are in another mode, will flash to indicate the timer  
is running.  
MEMORY  
The pedometer has a 7-day memory function. You can  
view total weekly or daily step, distance and calorie  
records.  
Target not achieved =  
sad face and low beep  
sound.  
7
PE830_EU_M_EN_R1.p65  
7
2006.8.16, 4:47 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Press and hold SET to enter the setting mode.  
4. Press  
to toggle between your chosen day’s step,  
4. Press  
/
to change a value and SET to confirm  
distance and calorie display.  
and move on to the next setting.  
IMPORTANT At midnight all accumulated daily data  
will be stored for a period of 7 days. Therefore, once a  
memory has been stored for 7 days it is replaced with  
5. The setting sequence is:  
Hour  
Minute  
On / Off  
st  
new data from the 1 day of the new week.  
To stop the alarm sound, press any key.  
The bar at the bottom of the display will indicate  
which day’s memory record you are looking at.  
EXERCISE SCHEDULE REMINDER  
CLEAR ALL RECORDS  
Using SmartSync software, you can set up to 7 alarms to  
remind you to exercise, allowing you to specify an activity  
goal in steps, distance or calories.  
Press and hold RESET.  
ALARM  
To set a exercise reminder:  
For detailed information on the steps needed to set the  
reminder alarm, see the software Help file.  
When in the Clock Mode, press to toggle between the  
Clock and Alarm Mode.  
When a exercise reminder alarm sounds:  
To set the alarm:  
1. The unit will beep and  
remind will flash on the  
screen.  
1. Press MODE to navigate to the Clock Mode.  
2. Press to switch to  
the Alarm Mode.  
2. Press  
to view the preset activity goal type (steps,  
distance or calories).  
8
PE830_EU_M_EN_R1.p65  
8
2006.8.16, 4:47 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Press again to view the activity goal value.  
If no key is pressed when the alarm sounds, a  
back-up beep will sound again after 5 minutes.  
CONNECTING TO YOUR PC  
Data can be transferred to a PC directly from the  
pedometer or by using the base.  
To connect the pedometer to a PC:  
1. Insert the USB cable into your PC.  
2. Unclip the cover of the USB port on the pedometer.  
3. To connect directly to the pedometer: insert the USB  
cable into the port on the pedometer.  
4. To connect via the base: Insert the USB cable into the  
base. Then, place the pedometer onto the base so that  
the base USB connector is inserted into the pedometer  
USB port.  
When connected, ‘PC’ will appear on the LCD screen  
and the LED will be lit.  
When data is being transferred the green LED will  
flash.  
If connection is interrupted, please remove the  
USB cable from your PC and re-insert.  
BACKLIGHT / KEYPAD LOCK / RESET  
To turn the backlight ON for 3 seconds, press  
2006.8.16, 4:47 PM  
.
9
PE830_EU_M_EN_R1.p65  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
To turn the keypad lock ON / OFF, press and hold  
.
Do not subject the unit to excessive force, shock,  
dust, temperature or humidity, which may result in  
To reset the unit, remove and then re-insert the battery.  
malfunction, shorter electronic life span, damaged  
battery and distorted parts.  
BATTERIES  
Do not immerse the unit in water. If you spill liquid  
over it, dry it immediately with a soft, lint-free cloth.  
appears when the battery is low and needs replacing.  
Do not clean the unit with abrasive or corrosive  
materials.  
Protect the environment by taking exhausted  
Do not tamper with the unit’s internal components.  
Doing so will invalidate the warranty on the unit and  
batteries to authorized disposal stations.  
may cause unnecessary damage. The unit contains  
no user-serviceable parts.  
Only use fresh batteries as specified in the user’s  
instructions.  
Due to printing limitations, the displays shown in this  
manual may differ from the actual display.  
The contents of this manual may not be reproduced  
without the permission of the manufacturer.  
Do not dispose this product as unsorted municipal  
waste. Collection of such waste separately for special  
treatment is necessary.  
1. Unscrew to open back cover.  
Do not use rechargeable batteries with this product.  
2. Insert 1 CR2032 battery.  
Remove the batteries if storing this product for a  
3. Place the cover back and tighten the screw.  
long period of time.  
PRECAUTIONS  
The technical specifications for this product and  
the contents of the user manual are subject to change  
without notice  
This product is engineered to give you years of  
satisfactory service if you handle it carefully. Here are a  
few precautions:  
PE830_EU_M_EN_R1.p65  
10  
10  
2006.8.16, 4:47 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
TYPE  
ABOUT OREGON SCIENTIFIC  
more about Oregon Scientific products such as digital  
cameras; MP3 players; children’s electronic learning  
DESCRIPTION  
Pedometer  
L x W x H  
36 x 53 x 50 mm  
(1.4 x 2.1 x 2.0 in)  
products and games; projection clocks; health and fitness  
Base  
67 x 65 x 36 mm  
(2.7 x 2.6 x 1.4 in)  
gear; weather stations; and digital and conference  
L x W x H  
phones. The website also includes contact information  
for our Customer Care department in case you need to  
reach us, as well as frequently asked questions and  
customer downloads.  
Pedometer weight 37 g (1.3 oz)  
Base weight  
26 g (0.9 oz)  
Step counter  
0 to 99,999 steps  
We hope you will find all the information you need on our  
Distance travelled  
Stride distance  
Calorie display  
0 to 999.99 (in km or miles)  
28 to 152 cm (11 to 60 in)  
0.1 to 9999.9 kcal  
website, however if you’re in the US and would like to  
contact the Oregon Scientific Customer Care department  
directly, please visit:  
www2.oregonscientific.com/service/default.asp  
Body weight range 29 to 154 kg (64 to 340 lbs)  
OR  
Pulse range  
30 to 240 bpm  
Call 1-800-853-8883.  
Operating temperature -10°C to 40°C (14°F to 104°F)  
Storage temperature -20°C to 60°C (-4°F to 140°F)  
For international inquiries, please visit:  
www2.oregonscientific.com/about/international.asp  
Power  
1 x CR2032 3V cell battery.  
11  
PE830_EU_M_EN_R1.p65  
11  
2006.8.16, 4:47 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EU-DECLARATION OF CONFORMITY  
Hereby, Oregon Scientific, declares that this SmartSync  
Pedometer with PC Download (PE830) is in compliance  
with EMC directive 89/336/CE. A copy of the signed and  
dated Declaration of Conformity is available on request  
via our Oregon Scientific Customer Service.  
12  
PE830_EU_M_EN_R1.p65  
12  
2006.8.16, 4:47 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Milwaukee Saw 6230N User Manual
Mr Handsfree GPS Receiver 020386 User Manual
Napoleon Fireplaces Indoor Fireplace GDS28P User Manual
NEC Computer Accessories MA4000 User Manual
NEC Time Clock ST M401461 User Manual
Nikon Photo Scanner SB3H0150010130 6MRA0830 User Manual
Niles Audio Speaker SW10JM User Manual
Nortel Networks Cordless Telephone 4060 User Manual
Olympus SONAR FC 1 User Manual
Panamax Surge Protector PM8 EX User Manual