Oregon Scientific Fitness Electronics PE823 User Manual

Daily ........................................................................... 5  
Target ......................................................................... 6  
Timer .......................................................................... 6  
Memory ...................................................................... 7  
View Total Weekly Records ..................................... 7  
View Daily Records .................................................. 7  
Clear All Records ..................................................... 8  
Clock / User Profile ................................................... 8  
To Set the User Profile for 1st Time Use or After  
Pedometer With 7-Day Memory  
(Model: PE823)  
Pedometer With Pulse Meter  
(Model: PE826)  
Pedometer With Panic Alarm  
(Model: PE828)  
Talking Pedometer With FM Radio  
(Model: PE829)  
a Battery Change ..................................................... 8  
Change Individual Clock or User Profile Settings .... 9  
Alarm.......................................................................... 9  
Pulse Meter / Stress Index (Available in PE826 Only) . 9  
How to Use Panic Alarm (Available in PE828 Only) ... 11  
FM Radio (Available in PE829 Only)....................... 11  
Scanning and Storing Radio Channels ................... 11  
Talk Function (Available in PE829 Only) ............... 12  
Backlight / LED Light / Keypad Lock / Reset ....... 12  
Batteries .................................................................. 12  
PE823 / PE826 ...................................................... 13  
PE828 .................................................................... 13  
PE829 .................................................................... 13  
Warnings.................................................................. 13  
Specifications ......................................................... 14  
About Oregon Scientific......................................... 15  
EC-Declaration of Conformity ............................... 15  
USER MANUAL  
CONTENTS  
Introduction ............................................................... 2  
Key Features ............................................................. 2  
PE823 – Front and Back View ................................. 2  
PE826 – Front and Back View ................................. 2  
PE828 – Front and Back View ................................. 2  
PE829 – Front and Back View ................................. 3  
LCD ............................................................................ 4  
Getting Started .......................................................... 4  
Set Up ...................................................................... 4  
Important for Accuracy ............................................. 4  
Useful Tips ............................................................... 5  
Switching Between Operation Modes..................... 5  
1
PE82X_M_EN_V2.p65  
1
2005.7.19, 12:16 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. LCD screen  
2. MODE / SET button  
3.  
4. RESET /  
5.  
6. Belt clip  
/
button  
/
/
button  
/
button  
7. Battery door  
8. Pulse meter  
9.  
Pulse rate button  
LED light button  
10.  
11. LED light  
12. Panic alarm pin  
PE829 – FRONT AND BACK VIEW  
13. Fastening clip and chord  
14. Selects radio channel  
15. Radio ON  
16.  
/
Scan up and down FM frequency  
17.  
Increase and decrease volume  
18. Radio OFF  
19. Talk button  
20. Earphone jack  
3
PE82X_M_EN_V2.p65  
3
2005.7.19, 12:16 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LCD  
GETTING STARTED  
SET UP  
You must set up the device (as shown below) when you  
first activate the unit, reset it or change the batteries, or  
your pedometer will not work properly.  
1. To activate the device, pull out the insulation tape  
underneath the battery cover. (For PE828, insert  
batteries.)  
2. Set the clock and user profile (see Clock / User  
Profile section).  
3. PE826 only – Calibrate the stress index baseline (see  
Pulse Meter / Stress Index section).  
1. Shows when in Target Mode  
2. Shows when in Timer Mode and flashes when you  
are in another display and timer is running  
4. Attach the pedometer to  
your belt or training attire  
at waist level. Secure it  
at horizontal position.  
Improper positioning  
may result in incorrect  
data collection.  
3. Shows when Auto Announcement is activated –  
PE829 only  
4. Shows when talk function is operational – PE829 only  
5. Shows when FM Radio is operational – PE829 only  
6. Shows when keypad lock is enabled  
7. Shows when alarm is activated  
8. Shows when in Timer Mode  
9. Shows value of step, distance and calorie, clock / alarm  
time, timer and user profile  
IMPORTANT FOR ACCURACY  
The following conditions may cause incorrect reading  
of steps taken:  
10. Shows when in 7-day Memory Mode  
11. Colored bar shows the memory weekday and target  
status  
1. Uneven walking pace, such as walking in crowded  
areas or on uneven floor.  
12. Dot matrix shows various icons to indicate the mode /  
display you are in  
4
PE82X_M_EN_V2.p65  
4
2005.7.19, 12:17 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. Frequent up and down movements, such as standing  
up and/or sitting down; running, jumping, or ascending/  
descending stairs or steep slopes.  
DAILY  
To view the step, distance and calorie display:  
1. Press MODE to  
navigate to Daily  
Mode.  
USEFUL TIPS  
When changing settings you can:  
Press and hold  
options.  
/
to speed through the setting  
2. Press to switch between the 3 displays;  
Press SET to bypass or confirm a setting and move  
on to the next one.  
STEP  
During setting mode, if a key is not pressed within  
30 seconds, there will be a beep sound and the screen  
will return back to the previous mode.  
SWITCHING BETWEEN OPERATION MODES  
DISTANCE  
CALORIE  
Press MODE to switch between the 6 operation  
modes:  
Daily  
Target  
Timer  
7-day Memory  
User Profile  
Clock  
The modes are described in the sections that follow.  
5
PE82X_M_EN_V2.p65  
5
2005.7.19, 12:17 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. While you are walking, the ESTIMATED FINISH TIME  
(EFT) will periodically appear to advise you how long  
it will take to complete your target, based on your  
current pace. The target bar at the bottom of the display  
will move from left to right (start to finish) to show your  
progress.  
TARGET  
To set step, distance or calorie target:  
1. Press MODE to  
navigate to Target  
Mode.  
3. Press  
to toggle between the EFT and remaining  
steps, distance or calories left until target is reached.  
4. When target walk is  
complete, FINISH  
will appear and a  
beep will sound.  
2. Press and hold SET  
for 2 seconds to  
enter setting mode.  
3. Press  
4. Press SET to confirm.  
5. Press to change the value of each digit, and  
/
to select STEP, DISTANCE or CALORIES.  
5. To reset the target for the next user session, press  
and hold RESET.  
/
SET to confirm and move on to the next setting.  
TIMER  
When the timer is running, it will measure steps, distance  
and calories. These measurements are not linked to the  
daily measurements and are only related to the time spent  
walking while the timer is on.  
To use target:  
1. Once the target  
has been set, start  
walking to activate  
the pedometer. The  
GO! screen will  
To set timer:  
1. Press MODE to  
navigate to Timer  
Mode.  
appear to confirm  
that the unit is  
starting to monitor  
your progress.  
6
PE82X_M_EN_V2.p65  
6
2005.7.19, 12:17 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. Press and hold SET for 2 seconds to enter setting  
2. Press  
to toggle between the total weekly step,  
mode.  
distance and calorie display.  
3. Press  
/
to select countdown or count-up timer  
and press SET. If the countdown timer is selected you  
VIEW DAILY RECORDS  
will need to set the hr:min:sec by pressing  
/
to  
1. Press MODE to navigate to Memory Mode.  
change a value and SET to confirm.  
2. Press  
to enter the daily record display.  
To use timer:  
3. Press  
repeatedly until you reach the day you wish  
Press to start / stop the timer.  
to view. When you have selected the day you wish to  
view a 1-second display will show to advise you if you  
reached that days target or not:  
Press and hold to reset the timer.  
Press  
repeatedly to view timer step, distance and  
Target achieved =  
smiley face and high  
beep sound.  
calories values.  
When you are in the timer display will show. If  
you are in another mode, will flash to indicate the timer  
is running.  
Target not achieved  
= sad face and low  
beep sound.  
MEMORY  
The pedometer has a 7-day memory function. You can  
view total weekly or daily step, distance and calorie  
records.  
4. Press  
to toggle between your chosen days step,  
distance and calorie display.  
VIEW TOTAL WEEKLY RECORDS  
1. Press MODE to  
navigate to  
IMPORTANT At midnight all accumulated daily data will  
be stored for a period of 7 days. Therefore, once a memory  
has been stored for 7 days it is replaced with new data  
from the 1st day of the new week.  
Memory Mode.  
7
PE82X_M_EN_V2.p65  
7
2005.7.19, 12:17 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CLOCK  
The bar at the bottom of the display will indicate  
which day’s memory record you are looking at.  
12/24hr format  
Hour  
Minute  
CLEAR ALL RECORDS  
Day of the week  
Press and hold RESET.  
USER PROFILE  
CLOCK / USER PROFILE  
TO SET THE USER PROFILE FOR 1ST TIME  
USE OR AFTER A BATTERY CHANGE  
Upper pulse limit (PE826 only)  
Lower pulse limit (PE826 only)  
Weight unit  
Weight  
Stride unit  
Stride  
When the installation tape is removed to activate the  
pedometer and whenever the batteries are changed, the  
pedometer will ask you to set the clock and user profile.  
Please complete the settings as shown below or your  
pedometer will not work properly.  
Age  
Gender  
1. The first setting will  
flash.  
To calculate stride length:  
Individual stride length varies. Input an appropriate length  
for an average stride. To determine the average stride  
length, walk 10 paces and divide the distance traveled by  
10.  
2. Press  
/
to change a value and SET to confirm  
and move on to the next setting.  
3. The setting sequence is:  
8
PE82X_M_EN_V2.p65  
8
2005.7.19, 12:17 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. The setting sequence is:  
Hour Minute  
CHANGE INDIVIDUAL CLOCK OR USER  
PROFILE SETTINGS  
On / Off  
To stop the alarm sound, press any key  
If after the initial setting of the clock / user profile (as  
detailed in previous section), you wish to change the clock  
time or edit one of the user profile settings, simply:  
PULSE METER / STRESS INDEX (AVAILABLE  
IN PE826 ONLY)  
1. Press MODE to navigate to Clock or User Profile  
Mode.  
For first-time use, or after replacing a battery or  
2. Profile Mode only; use  
you wish to change.  
/
to scroll to the setting  
resetting the unit, user must calibrate stress index  
baseline, otherwise no valid reading can be obtained.  
3. Press and hold SET to enter setting mode.  
4. Press  
/
to change a value and SET to confirm.  
To calibrate your stress index baseline:  
The index is highly individual, so you need to calibrate  
your personal baseline before you use this function to  
monitor your stress status.  
ALARM  
When in the Clock Mode, press to toggle between the  
Clock and Alarm Mode.  
Make sure you relax for 2 to 3 minutes before you start  
the calibration:  
To set the alarm:  
1. Press  
to enter Pulse Mode.  
1. Press MODE to navigate to Clock Mode.  
2. Press to enter  
calibration setting.  
2. Press to switch  
to Alarm Mode.  
3. Press and hold SET to start calibration.  
3. Press and hold SET to enter the setting mode.  
4. Press  
/
to change a value and SET to confirm  
and move on to the next setting.  
9
PE82X_M_EN_V2.p65  
9
2005.7.19, 12:17 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. Relax and put the  
tip of your thumb or  
index finger on the  
pulse sensor.  
5. The LCD will display your stress level as follows:  
ICON  
BAR COLOR  
MEANING  
Green  
Relaxed  
Yellow  
Red  
Normal  
Not relaxed  
5. Wait for about 10 seconds until the word FINISH  
appears on the LCD panel.  
Retry if failed (if no reading is showing within 1  
minute the pedometer will escape from pulse mode). You  
6. Repeat 3-5 if the  
calibration fails.  
then press pulse rate button  
again.  
TIPS  
Cold fingertips and cold air can affect the  
measurement. You may need to warm your hands  
before you start.  
It’s highly recommended to calibrate your  
individual stress index baseline once a month or whenever  
you want to refer to your parameter in different situations.  
The sensor is sensitive to light sources. Cover the  
entire sensor area with your fingertip to block all light.  
To measure pulse and stress level:  
Gently touch the pulse sensor; do not press hard.  
1. Keep calm before and during measuring.  
Keep still and calm during measurement. Moving  
about can affect the reading.  
2. Press  
.
Wait the proper amount of time: Measurements can  
take 6-12 seconds depending on the stability of the  
signals received.  
3. Put the tip of your thumb or index finger on the IR  
sensor.  
4. Wait for about 10  
seconds until pulse  
rate is shown (e.g.  
100).  
What is your stress index?  
The stress index measurement is based on heart rate  
variability, which indicates your involuntary nervous  
system’s status.  
10  
PE82X_M_EN_V2.p65  
10  
2005.7.19, 12:17 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
A large heart rate variation is an indication that the  
parasympathetic nervous system has a predominance,  
which generally corresponds to someone in a relaxed  
state.  
One new 12V battery can last for approx. 15  
minutes if the panic alarm is activated. It is recommended  
that you quickly test the alarm function every time you  
use the pedometer.  
As for a smaller value, it indicates that the sympathetic  
nervous system is active, which is related to physical or  
mental stress.  
FM RADIO (AVAILABLE IN PE829 ONLY)  
To turn the radio ON, press and hold  
To turn the radio OFF, press and hold  
.
HOW TO USE PANIC ALARM (AVAILABLE IN  
PE828 ONLY)  
.
When using the radio, make sure the earphones  
are plugged in (  
will appear on the screen).  
SCANNING AND STORING RADIO  
CHANNELS  
The radio receives FM frequency between 87.5 to 108  
MHz. You can store up to 5 channels.  
To scan and store a radio channel:  
1. Press and hold  
/
to activate auto-scan. When a  
channel has been found, press  
the channel.  
/
to fine-tune  
2. Press and hold CH to enter channel-storing mode.  
3. Use to select a channel number (1-5).  
The alarm will be activated when the panic alarm pin is  
detached from its socket.  
/
4. Press CH to store. Repeat the whole process to store  
Pull the chord and detach the pin to activate the alarm.  
another channel.  
To stop the alarm, simply reconnect the pin to its  
socket.  
11  
PE82X_M_EN_V2.p65  
11  
2005.7.19, 12:17 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To change the volume level, press  
.
Pacer ON / OFF. If ON is selected you will need to set  
the pacer frequency which ranges from 45 to 180  
beeps per minute. This function helps you maintain  
the pace of your walk / run, as each beep represents  
one step.  
To listen to a stored channel, press CH.  
Prolonged use of the FM Radio will significantly  
reduce battery life.  
Languages available – English, French and Spanish  
OR English, Italian and German.  
TALK FUNCTION (AVAILABLE IN PE829  
ONLY)  
The radio function will be paused when the auto-talk  
broadcast is happening or when you press TALK.  
The talk function is available for DAILY / TARGET / TIMER  
/ MEMORY and CLOCK modes. It will broadcast  
information related to the current LCD screen, for example  
on Daily Mode you will hear: “Today, you have walked  
XXXXX steps, XX.XX kilometers/miles and burned  
XXXX.X calories.  
BACKLIGHT / LED LIGHT / KEYPAD LOCK /  
RESET  
To turn the backlight ON for 3 seconds, press  
.
To turn the LED light ON, press . When you release the  
button the light will turn OFF (PE828 only).  
Broadcasts can be announced automatically at pre-  
defined intervals (as detailed in the setting sequence  
below), or manually by pressing TALK.  
To turn the keypad lock ON / OFF, press and hold  
.
appears when the talk function is broadcasting.  
To reset the unit, remove and then re-insert the batteries.  
To set up the talk function:  
BATTERIES  
1. Press and hold TALK to enter setting mode.  
appears when the battery is low and needs replacing.  
2. Press  
/
to change a setting and press TALK to  
confirm and move on to the next one.  
Protect the environment by taking exhausted  
batteries to authorized disposal stations.  
3. The setting sequence is:  
Auto-talk ON / OFF. If ON is selected you will need to  
set the broadcast interval time to 5, 10 or 15 mins.  
appears on the screen when this function is activated.  
12  
PE82X_M_EN_V2.p65  
12  
2005.7.19, 12:17 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PE829  
PE823 / PE826  
To change the battery:  
To change the battery:  
1. Gently press down on button with a blunt stylus to  
release battery compartment.  
1. Gently press down on button with a blunt stylus to  
release battery compartment.  
2. Insert 2 x CR2032 batteries.  
2. Insert 1 x CR2032 battery.  
3. Gently push back the battery compartment.  
3. Gently push back the battery compartment.  
WARNINGS  
PE828  
This product is designed to give you years of service if  
handled properly. Observe the following guidelines:  
Never immerse the unit in water. This can cause  
electrical shock and damage the unit. Clean the unit  
with a slightly damp cloth and mild detergent.  
Do not subject the unit to extreme force, shock, or  
fluctuations in temperature or humidity.  
Do not tamper with the internal components. Doing  
so will terminate the unit’s warranty and may cause  
damage. The unit contains no user-serviceable parts.  
To change the battery:  
1. Unscrew to open the back cover.  
2. Insert 1 x CR2032 and 1 x 12V battery.  
3. Place the cover back and tighten the screw.  
Do not mix new and old batteries or batteries of  
different types.  
13  
PE82X_M_EN_V2.p65  
13  
2005.7.19, 12:17 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Do not use rechargeable batteries with this product.  
Dimensions – without clip (W x H x D) and weight  
Remove the batteries if storing this product for a long  
period of time.  
PE823  
PE826  
PE828  
PE829  
2.1 x 1.9 x 1.0 inches  
(52 x 47 x 25 mm)  
33 g (1.16 ounces)  
Do not scratch the LCD display.  
The contents of this user manual and technical  
specifications are subject to change without further notice.  
Images not drawn to scale.  
2.4 x 2.2 x 1.0 inches  
(60.3 x 54.9 x 24 mm)  
38 g (1.34 ounces)  
SPECIFICATIONS  
2.3 x 2.5 x 1.0 inches  
(58.7 x 62.4 x 25 mm)  
61 g (2.15 ounces)  
TYPE  
DESCRIPTION  
Step counter  
0 to 99,999 steps  
2.4 x 2.1 x 1.0 inches  
(61.4 x 53.5 x 26 mm)  
60 g (2.12 ounces)  
Target step range 100 to 99,900 steps  
Timer range 0 to 99hrs:59mins:59secs  
Distance traveled 0 to 999.99miles (0 to 999.99km)  
Batteries  
PE823  
1 x CR2032 3V  
Stride distance  
Calorie display  
11 to 60 inches (28 to 152 cm)  
0.1 to 9999.9 kcal  
PE826  
PE828  
1 x CR2032 3V  
1 x CR2032 3V  
1 x 12V  
Body weight range 64lbs to 340lbs (29 to 154kg)  
Pulse range  
30 – 240 bpm  
PE829  
2 x CR2032 3V  
Operating temp.  
Storage temp.  
14 to 104.0°F (-10 to 40°C)  
-4 to 140°F (-20 to 60°C)  
14  
PE82X_M_EN_V2.p65  
14  
2005.7.19, 12:17 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ABOUT OREGON SCIENTIFIC  
EC-DECLARATION OF CONFORMITY  
about Oregon Scientific products such as digital cameras;  
MP3 players; children’s electronic learning products and  
games; projection clocks; health and fitness gear; weather  
stations; and digital and conference phones. The website  
also includes contact information for our Customer Care  
department in case you need to reach us, as well as  
frequently asked questions and customer downloads.  
Hereby, Oregon Scientific, declares that this pedometer  
model PE823 / PE826 / PE828 / PE829 is in compliance  
with the essential requirements and other relevant  
provisions of EMC directive 89 / 336 / CE and LVD directive  
73 / 23 / EC.  
A copy of the signed and dated Declaration of Conformity  
is available on request via our Oregon Scientific Customer  
Service  
We hope you will find all the information you need on our  
website, however if you’re in the US and would like to  
contact the Oregon Scientific Customer Care department  
directly, please visit:  
COUNTRIES RTTE APPROVAL COMPLIED  
www2.oregonscientific.com/service/support  
All EC countries, Switzerland CH  
OR  
and Norway  
N
Call 1-800-853-8883.  
For international inquiries, please visit:  
www2.oregonscientific.com/about/international  
15  
PE82X_M_EN_V2.p65  
15  
2005.7.19, 12:17 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Milwaukee Impact Driver 9078 20 User Manual
National Instruments Network Card FP 1000 User Manual
NeumannBerlin Microphone KK 131 User Manual
NeumannBerlin Microphone PS 15 User Manual
NeumannBerlin Microphone U 67 Fet User Manual
Niles Audio Universal Remote RCA HT User Manual
Oregon Scientific Clock RAR186 User Manual
Panasonic CD Player CQ 730EUC User Manual
ParaBody Home Gym PBF049A User Manual
Partner Tech Lawn Mower PP53 875DWA User Manual