Oregon Scientific Clock Radio RM982A User Manual

CRESCENDO ALARM AND SNOOZE FUNCTION  
When the alarm goes off at the preset time, the backlight will be turned on for 8  
ENGLISH  
Strong, Forte, Stark, Buona, Fuerte, Forte  
Weak, Faible, Schwach, Debole, Devil, Fraco  
seconds. The ALARM ON icon [  
turned on.  
] flashing and the alarm sound will be  
INTRODUCTION  
Congratulations on your purchase of the RM982A Radio-controlled Clock.  
RADIO CONTROLLED CLOCK  
The crescendo alarm function allows the alarm sound to start off gently with  
step-up intensity. Without interruption, the alarm will go off for 2 minutes.  
Features of RM982A include:  
MODEL : RM982A  
No Reception, Pas de réception, Kein Empfang,  
Ricezione nulla, No Hay Recepcion, Sem sinal  
To stop the alarm, press ALARM or SNOOZE. If SNOOZE button is pressed,  
the alarm sound will be turned off temporarily and the snooze function will be  
activated. The alarm will go off again after approx. 8 minutes until other key is  
pressed to turn off the alarm.  
-
-
-
RF controlled Clock and Calendar  
USER MANUAL  
Backlight for night viewing  
Dual Alarm (Single and Weekday Alarm) with Snooze function  
Receiving, Recevant, Empfang,  
Ricezione, Recibiendo, A receber  
A
MAIN FEATURE [FIG. 1]  
RESETTING THE UNIT  
A. SNOOZE BUTTON  
In case of malfunction or abnormal display, take out and re-install the batteries  
again. All settings will be cleared and reset to their default values.  
Fig. 3  
B
C
-Press to turn on the backlight for 5 seconds  
-Press to activate the 8-minute Snooze function when alarm goes off  
E
B. CLOCK WINDOW  
MAINTENANCE  
When handled properly, this unit is engineered to give you years of satisfactory  
service. Here are a few product care instructions:  
-Displays clock function  
D
F
C. CALENDAR WINDOW  
-Displays calendar  
1. Do not immerse the unit in water. If the unit comes in contact with water,  
dry it immediately with a soft lint-free cloth.  
D. ALARM BUTTON  
-Press to toggle among Weekday Alarm, Single Alarm and Clock mode  
-Press and hold for 2 seconds to enter the alarm time setting mode when  
the respective alarm mode is in display  
2. Do not clean the unit with abrasive or corrosive materials. Abrasive clean-  
ing agents may scratch the plastic parts and corrode the electronic circuit.  
3. Do not subject the unit to excessive: force, shock, dust, temperature, or  
humidity. Such treatment may result in malfunction, a shorter electronic  
life span, damaged batteries, or distorted parts.  
E. MODE BUTTON  
-Press to toggle among the following displays:  
Clock with Second Clock with Weekday Clock with offset hour …  
-Press and hold for 2 seconds to enter the clock setting mode  
4. Do not tamper with the unit’s internal components. Doing so will termi-  
nate the unit’s warranty and may cause damage. The unit contains no user-  
serviceable parts.  
G
F. UP & DOWN BUTTONS  
Fig. 1  
-Press to increase or decrease the value of a setting  
-Press to activate or deactivate the alarm when the respective alarm time is  
shown  
5. Only use new batteries as specified in this instruction manual.  
6. Read this instruction manual thoroughly before operating the unit.  
Fig. 7  
G. BATTERY COMPARTMENT  
-Uses 1 piece of UM-3 or "AA" battery  
SPECIFICATIONS  
BATTERY INSTALLATION [Fig. 2a]  
Remark: Replace with new battery when the low battery indicator [  
displayed [Fig. 2b]  
Operating Temperature  
Clock Functions  
Radio Control  
:
23°F to 122°F  
] is  
:
:
By Radio signal generated from the  
U.S. Atomic Clock  
Calendar  
Weekday in English, German, French,  
Italian and Spanish  
Month / Day  
HOW TO USE THE BACKLIGHT  
Press the SNOOZE button to turn on the backlight for 5 seconds.  
Clock Time  
Accuracy  
:
12 / 24 hour format  
Fig. 2a  
Fig. 2b  
ABOUT RADIO RECEPTION [FIG. 3]  
:
:
+/-0.5 second/day (when RF is disabled)  
+/- 9 hours  
RM982A is designed to synchronize its calendar clock automatically once it is  
brought within range of the radio signal from the U.S. Atomic Clock.When the  
unit is new and just out of the box, synchronization with the U.S. Atomic Clock  
can take up to 72 hours .  
Hour Offset  
General Specification  
Battery Type  
Fig. 8  
:
:
:
1 piece of UM3 or "AA" size 1.5V battery  
4.53x3.54x1.97 inches (H x W x D)  
4.80 ounces (without battery)  
When the unit is receiving signal, the Radio Reception symbol will start to blink.  
Generally, complete reception takes around 2 to 10 minutes depending on the  
strength of the radio signal.  
Unit Dimension  
Unit Weight  
To disable the reception of RF signal manually, press and hold the DOWN  
button for 2 seconds until the Radio Reception symbol disappear.  
CUSTOMER ASSISTANCE  
To enable the reception again, press and hold the UP button for 2 seconds. The  
Radio Reception symbol will blink and the unit will search for RF signal  
automatically.  
Should you require assistance regarding this product and its operation, please  
contact our customer care department at 541-868-8205 or via email at  
Interference  
Reception can be affected by a number of factors. For best reception, place the  
device away from metal objects and electrical appliances. Other causes for signal  
interference include electrical power transmission towers, steel reinforced  
concrete construction, and/or metal siding.  
WARRANTY  
Set off-set hour for the 2nd time zone  
R gle la compensation du deuxi me fuseau horaire.  
Zeitzonenversatz einstellen  
Imposta lora di offset del 2fuso orario  
This product is warranted to be free of manufacturing defects for a period of 90  
days from date of retail purchase. Defective product should be directed to the  
place of retail purchase for exchange. Should this not be possible, contact our  
customer care department for assistance and a return material authorization. No  
returns may be made without a return authorization. Please retain your retail  
receipt as you may be asked to provide a copy of it for proof of date purchased.  
hora de compensaci n de 2a hora/zona horaria  
Ajustar a diferen a hor ria da 2a. zona de fuso hor rio  
Note: Radio Frequency appliances such as the Projection Alarm Clock perform  
best when placed near a window. After receiving the initial signal, updates are  
accomplished with greater ease. Even though there are areas that may have  
more difficulty in receiving a signal, the Projection Alarm Clock contains very  
accurate quartz movement and will retain precise time even if a signal is missed  
on a rare occasion.  
This warranty does not cover product subjected to abuse, misuse, accidental  
damage or tampering.  
Fig. 6  
HOW TO SET THE CLOCK AND CALENDAR  
MANUALLY [Fig. 4] & [Fig. 5]  
Language  
Langues  
Sprache  
Lingue  
Day-of-the-week  
Giorno della settimana Día de la semana  
Affichage du jour  
Wochentaganzeige  
Dia de Semana  
CAUTION  
Monday Tuesday Wednesday Thursday Friday Saturday Sunday  
Lundi Mardi Mercredi Jeudi Vendredi Samedi Dimanche  
Montag Dienstag Mittwoch Donnerstag Freitag Samstag Sonntag  
Lunedí Martedí Mercoledí Glovedí  
Lunes Martes Miércoles Jueves  
Segunda Terça Quarta Quinta  
-
-
The content of this manual is subject to change without further notice.  
Due to printing limitation, the displays shown in this manual may dif-  
fer from the actual display.  
It is unlikely that you will want or need to manually set the Alarm Clock.  
Should the need or desire to manually set the clock arise, please follow  
(Fig.4).To set the calendar manually follow instructions in Fig. (5).The default  
clock setting is 1st of January, 2001; 12:00pm (Pacific zone-time) with hour-  
offset preset as -8 hours. Please note that upon successful reception of the  
signal from the U.S. Atomic Clock, the time display will be adjusted to  
Pacific zone-time automatically. You can set the offset-hour as follow in order  
to display the other US time-zones:  
Venerdí Sabato Domenica  
Viernes Sábado Domingo  
Sexta  
Idiomas  
Lingua  
Sábado Domingo  
-
The contents of this manual may not be reproduced without the per-  
mission of the manufacturer.  
English  
Anglais  
Englisch  
Inglese  
Inglés  
Inglês  
German  
Allemand  
Deutsch  
Tedesco  
Alemán  
Alemão  
-
-
-
7 — Mountain  
6 — Central  
5 — Eastern  
French  
Français  
Französisch  
Francese  
Francés  
Francês  
Otherwise, you can change the offset-hour to display other zone-time outside  
the U.S. (Fig 6).  
Italian  
Italian  
Italienisch  
Italiano  
Italiano  
Italíano  
HOW TO SET AND ACTIVATE THE ALARM  
This unit is equipped with 2 alarms: Single Alarm [ ] and Weekday Alarm  
[
]. For the Single Alarm, it will go off only once at the preset time. For the  
Spanish  
Espagnol  
Spanisch  
Spagnolo  
Español  
Espanhol  
Weekday Alarm, it will be enabled from Monday to Friday and disabled auto-  
matically during weekend (i.e., Saturday and Sunday).  
To set and activate the alarm, see [FIG. 7]  
Follow the same procedures to set and activate the Single and/orWeekday Alarm.  
To deactivate the alarm, see [FIG. 8]  
Fig. 5  
Use the [ up ] and [ down ] button to activate / deactivate the alarm in the  
respective Alarm Display Mode.  
Press & Hold 2 seconds  
Pulse y sostenga 2 segundos  
Tenere premuto per 2 secondi  
Appuyer dessus pendant 2 secondes.  
2 Sekunden lang drücken und festhalten  
Prima durante 2 segundos  
Fig. 4  
086-002277-01  
Fig. 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  

NEC Microwave Oven NM30BS User Manual
Oliso Food Saver Freshkeeper 500 User Manual
Omega Speaker Systems Thermometer OS550 BB Series User Manual
Optoma Technology Home Theater System HD700X User Manual
Oreck Vacuum Cleaner 79030 01REVA User Manual
Oreck Vacuum Cleaner XL3640HH User Manual
Oregon Scientific Thermometer THR2 8 User Manual
Palm Personal Computer OS Devices User Manual
Panasonic All in One Printer KX MB3010 User Manual
Paradyne Network Card 317x E1 User Manual