FEATURES AND BENEFITS
CHAIN
58J, 58L, 59J, AND 59L CHAINS
These new Oregon® .404”-pitch Super Guard® chains have been carefully developed to replace two
popular families of chain. Users of our previous 59LG-series and 52-series chains will find it easy to
make the switch. 58J, 58L, 59J, and 59L all feature a fast-working new chisel cutter that delivers
performance superior to its predecessors in all cutting modes. The new cutter is mounted on our
proven unequal-pitch 59 chassis for an unmatched combination of performance and durability. Oregon®
58/59 Super Guard® gives professional timber cutters who use .404”-pitch chains what they want: out-
of-the-box sharpness, high performance, resistance to stretch, and consistency from chain to chain.
These chains feature ramped depth gauges to reduce kickback energies, and are recommended for
cutting clean wood with saws 4.0 cubic inches (65cc) and larger, and with bars 20" (50cm) and longer.
Safety/ANSI: 58J, 58L, 59J, and 59L are yellow-label chains with kickback-reducing
features. These chains do not meet the kickback requirements for low-kickback chains.
Recommended Use: Professional use by loggers and forest firefighters who prefer
large saws and .404”-pitch chain.
FEATURES
BENEFITS
• Chisel cutters, factory ground with
optimum angles
• Superior cutting speed (nose-clear, nose-buried,
and boring)
• Smooth, easy cutting, minimal feed force required,
minimizes operator fatigue
• Sharpens with a 7/32” round file
• Easy filing and maintenance
• Depth gauge is ramp-shaped,
and offset
• Reduces roughness and kickback energies
without affecting performance
• Clean-ground gullet
• Maximum chip flow, helps prevent clogs from debris
• No out-of-the-box filing is needed
• Top-plate-angle
witness mark
• Easy, consistent sharpening
™
• Lubrilink tie straps
• Improved chain and bar lubrication
• More oil stays where it’s needed – on the chain
• The volume of oil required is reduced
• Long, high-strength cutter top plate
• Long working life, durable, resists breakage
• Made from patented OCS-01 steel-alloy
material (U.S. patent no. 5,772,957)
• Tougher than the steel on other chains, 20% tougher
at room temperature, 125% tougher at minus 20° F.
CHAIN PART
NUMBER
CUTTER
SEQUENCE
CUTTER
TYPE
KICKBACK-REDUCING
FEATURES
PITCH
.404”
GAUGE
58J
58L
59J
59L
.058”
.058”
.063”
.063”
Skip
Standard
Skip
Chisel
Ramp-shaped
Depth Gauges
Because every
cut counts
Standard
59L F&B
A107035
AB
0301
Download from Www.Somanuals.com. All Manuals Search And Download.
|