LOG BOOK
:
Age:
Weight:
kg/lbs
22.2
10:12
2
21.2
10:05
mmHg
220
200
180
160
140
120
100
80
x
x
x
x
x
x
60
85 90
158 155
/ min
92 93
110 112
Download from Www.Somanuals.com. All Manuals Search And Download.
1
WRIST TYPE BLOOD PRESSURE
MONITOR
INFORMATION CONCERNING THE CE
SYMBOL
ThisdevicecomplieswiththeEuropeanregulationsbasedonthe
Medical Products Code, and bears the CE mark “CE0123”. The
device has been quality inspected according to EG guideline
93/42/EWG and tested in compliance to the EN1060-1
Non-invasivesphygmomanometers-Part1,Generalrequirements
and EN1060-3 Non-invasive sphygmomanometers-Part 3:
Supplementary requirements for electromechanical blood
pressure measuring systems. It is therefore not subject to
calibration regulations and does not bear a calibration stamp.
MODEL: BPW128
USER’S MANUAL
INTRODUCTION
Thank you for purchasing the Wrist Blood-Pressure Monitor
(BPW128). This unit has been constructed using reliable circuitry
and durable materials. Used properly, this unit will provide years of
satisfactory use.
The CE mark further indicates that this blood pressure monitor
meetsthegeneralrequirementsforelectronicproductsasregards
resistance to electromagnetic interference. Malfunctioning may
however occur in the proximity of extremely strong
electromagnetic fields.
Before use please note:
-
-
This device is intended for non-invasive measuring and
monitoring of arterial blood pressure. Designed for use on
the wrist, it is not intended for use on other extremities or
for other functions other than obtaining a blood-pressure
measurement.
In accordance with the “Ordinance for Operators of Medical
Products”, a technical inspection must be carried out if this
device is used for industrial or commercial purposes.
If the cuff pressure exceeds 300mmHg, this unit will
automatically deflate. Should the cuff not deflate when
pressures exceeds 300mmHg, the user is required to detach
the cuff from the wrist.
-
-
Do not begin medical treatment based solely on obtained
measurement values from this device. Consult a physician
for treatment advice.
To avoid measurement errors, read this manual carefully
before use.
Download from Www.Somanuals.com. All Manuals Search And Download.
3
DESCRIPTION AND FUNCTION OF
PARTS
F
A
A. Liquid Crystal Display (LCD) and protective cover
- Large easy-reading display
- 5 functional symbols
- Systolic [SYS/mmHg], Diastolic [DIA/mmHg], Mean
[MAP/mmHg], Pulse [pul/min.]and date & time display.
E
C
B. Battery compartment
Houses two (2) LR03 /AAA/ UM4 size 1.5V batteries
D
C.
D.
Button
- For time adjustment.
B
Button
- Activates and deactivates the unit and initiates pressure
measuement process.
E.
/ ▲ Button
- Recall memory or increases a value.
F. Wrist cuff
- For wrapping around the wrist.
G. Storage container
G
- Houses and neatly stores the unit.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
DISPLAY-SYMBOL DESCRIPTION
INSTALLING BATTERIES
1. Slide battery cover off.
2. Install batteries first. Ensure
correct polarity.
Symbol
Description
Explanation
Battery Type:
2 Alkaline LR03 (AAA)size
3. Replace the cover.
Appears when
measurement value is
recalled from memory
Memory Mark
Replace the batteries if:
1. the weak battery mark appears
in the display
Appears when batteries
should be replaced
Weak Battery
Inflating Mark
Air releasing
2. nothing appears in the display
when the power is switched on.
Appears when inflating
until pressure is enough
If not disposed of properly, batteries can be harmful.
Protecttheenvironmentbytakingexhaustedbatteries
to authorized disposal stations.
Appears when cuff air is
exhausting
Note:
When battery power is low, replace all the batteries.
Pulse Mark
Shows the pulse rate per
minute
Download from Www.Somanuals.com. All Manuals Search And Download.
5
PROPER EQUIPMENT SETUP
1. Removeallwatches,jewelry, etc. priortoattachingthewristmonitor. Clothingsleevesshould berolledupandthecuffshouldbewrapped
on bare skin for correct measurements.
2. Apply cuff to left wrist with palm facing up.
3. Make sure the edge of the cuff is about 1 cm from the plam.
4. In order to ensure accurate measurements, fasten the velcro strap securely around your wrist so there is no extra space between the cuff
and the wrist. If the cuff is not wrapped tight enough, the measurement values will be inaccurate.
5. The measurement values will be correct even if you wrap the cuff askew.
6. If your physician has diagnosed you with poor circulation on your left arm, carefully place the cuff around your right wrist.
1cm
Download from Www.Somanuals.com. All Manuals Search And Download.
6
BLOOD PRESURE DEFINITIONS
WHAT IS MEAN ARTERIAL PRESSURE
(MAP)
Information obtained from the World Health Organization (WHO)
The Mean Arterial Pressure is the average pressure forcing blood
through the arteries. It is not the average of the systolic and diastolic
blood pressure. It corresponds to a state of balance between the
compressive and expansive forces acting on the arterial wall when
there is no distension of the arterial wall, either outward or inward.
Hypertension
systolic over 160
diastolic over 95
(high pressure)
95
90
Hypertonia
systolic 140-159
diastolic 90-94
(Border value)
MAP is an excellent way to evaluate the stress on the walls of the
vessels. It is useful to quickly evaluate excessive load on the
cardiovascular system. Show the history of the MAP to your doctor
mayhelpprovidingmoreinformationforhisreferencetounderstand
your situation.
Hypotension
Normal
(low pressure)
systolic under 90
range
systolic 139
diastolic 89
Important:
!
90
Systolic (mmHg)
140
160
Consult your doctor on Mean Arterial Pressure.
OSCILLOMETRIC MEASURING METHOD
This device adopts the Oscillometric Measuring Method to provide
readings of not only Diastolic and Systolic blood pressure, but also,
unique,MeanArterialPressure.TheOscillometricMeasuringMethod
was first described by Marey in the late 1800s, several decades
before Korotkoffs description of the auscultatory method. The
Oscillometric Measuring Method is a good means to determine the
systolic / diastolic / mean blood pressure based on the measurement
of pressure oscillation during the cuff pressure deflation phase.
please note:
-Hypotension value is for reference only.
-Blood pressure is considered high when either the diastolic
or systolic blood pressure value exceeds normal range.
-Consult a medical professional when blood-pressure values
are outside of the normal range.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
MEASUREMENT
With the individual in a sitting position and with the cuff attached as
previously mentioned, a blood pressure reading can be obtained.
Note:
-
For accurate pressure measurement, take blood-pressure
readings in a seated position. Avoid leaning back while
the measurement is being taken.
-
-
Ensure that the lower arm is raised so that the upper edge
of the cuff is on the same level as the heart.
Ideally, place the palm of the hand facing upwards.
+
+
-
-
In order to ensure a proper measurement, sit quietly and
avoid talking and moving the fingers and hand. Rapid
movements or other activities may alter blood pressure
readings.
At any time, to stop the pressurizing process, press the
"
"Button; the cuff will stop inflating andair will exhaust
from the unit.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
HOW TO TAKE MEASUREMENT
Refer to Fig1
2sec
Fig1
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Note:
1. Remove all watches, jewelry, etc. prior to attaching the wrist
monitor. Clothingsleevesshouldberolledupandthecuffshould
be wrapped on bare skin for correct measurements.
2sec
2. Apply cuff to left wrist with palm facing up.
3. Make sure the edge of the cuff is about 1 cm from the plam.
4. In order to ensure accurate measurements, fasten the velcro strap
securely around your wrist so there is no extra space between the
cuff and the wrist. If the cuff is not wrapped tight enough, the
measurement values will be inaccurate.
5. Press the " " Button, to start the measurement process.
6. To interrupt the measurement, simply press button. The cuff
will deflate immediatey after the button is pressed.
7. Donottalkormoveyourarmorhandmuscles. Thismonitorwill
re-inflate automatically if the system detects that your body
needs higher pressure to measure your blood pressure.
8. Each reading will be saved to the memory automatically after
each measurement.
9. Up to 30 measurements can be stored to the memory.
HOW TO RECALL VALUES FROM
MEMORY
Fig 2
Refer to Fig2
Note:
a. The latest measurement will be shown first.
b. Every new press of the
calls for one prior value stored.
c. The date & time of measurement will be shown in the memory of
the same time.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
HOW TO SET THE TIME
Refer to Fig3
mode
Fig 3
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Note:
AUTOMATIC POWER OFF
1. Pressandholdthe [ ]buttonfor2seconds,thedisplaywillflash
12h or 24h.
The device will automatically switch off after about 1 minute.
However, to conserve battery power, press the
finished to turn the unit off.
button when
2. Press the [ ▲ ] button to select either 12 hour or 24 hour display.
3. Press the [ ] button to accept
4. The hour digits will flash. Press the [ ▲ ] button to set the hour
5. Press the [ ] button to accept
ERROR MESSAGES
6. The minutes digits will flash. Press the [ ▲ ] button to set the
minutes
Description
Display
Remedies
7. Press the [ ] button to accept
Deflation period too long
Err 1
Do not move during deflation.
8. Similarly, set the display for year, day / month or month / day
setting, month and date.
Check whether the unit is worn
well on wrist and measure
again.
Err 2, 8,
12, 13,
14, 15
9. Press the [ ] button to exit time date setting.
Incorrect measurement
Cuff is not fastened
Check if battery power is low.
Change all batteries and
measure again.
Fasten the cuff and measure
again.
Err 3
Err 4
Vigorous motion is being
detected during
measurement
Stay calm and easy then
measure again.
Stay calm and easy then
measure again.
Err 5,
6, 7
Measurement error
Calibration error
Retry again, return the unit to
the manufacturer for repairing
if same symptom persists.
Err 9,
10,11
(Repairing/Replacement
charge free only if under the
valid warranty. Proof of
purchase is needed).
Download from Www.Somanuals.com. All Manuals Search And Download.
12
MAINTENANCE, CLEANING AND CARE
SPECIFICATIONS
When handled properly, this unit is engineered to give years of
satisfactory service.
Measuring method
Application
: Oscillometric / non-invasive
: Adults
Here are a few product care instructions:
Measurement location
: Wrist section of lower arm
Circumference (approx. )
5.3"-7.7"(13.5-19.5cm)
-
When not in use, store the unit in the protective plastic container
provided with your purchase.
-
-
Donotimmersetheunitinwater.Iftheunitcomesincontactwith
water, dry it immediately with a soft lint-free cloth.
Pressure Measuring range : 30 - 280mmHg
Pulse Measuring Range
: 30 - 200 pulse/min
The unit casing and the cuff may be carefully cleaned with a soft,
slightly moistened cloth. Do not use abrasive or corrosive
cleaning agents which might damage the device.
Accuracy
: (Pressure) +/- 3mmHg
(Pulse) +/- 5%
-
-
Remove the batteries if the device will not be used for long
periods of time.
Operating environment
Operation
: 50°F ... 104°F (10°C...40°C)
(10% ... 83% rel. hum.)
When replacing batteries, use new batteries as specified in this
instruction manual. Do not mix new and old batteries.
-
-
Do not place objects on the cuff, or the main unit.
Storage / Transport:
-4°F...158°F (-20°C... 70°C)
(10% ... 83% rel.hum.)
Donotsubjecttheunittoexcessiveforce,shock,dust,temperature,
or humidity. Such treatment may result in malfunction, a shorter
electronic life span, damaged batteries or distorted parts.
Power supply
Dimensions
: 3.V DC, two (2) LR03/AAA /UM4
size batteries
-
-
Donottamperwiththeunit’sinternalcomponents. Doingsowill
terminate the unit’s warranty and may cause damage. The unit
contains no user-serviceable parts.
: approx. 3.1"(H)x3.0"(W)x1.3"(D)
(80mm(H)x77mm(W)x34mm(D)
: 4 oz (without battery)
Weight
If, one day, the device should not be required for further use,
protecttheenvironmentbybringingittoyourdealerordesignated
collection point for proper disposal.
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Shouldyourequireassistanceregardingthisproductanditsoperation,
please contact our Customer Care Department at 1-800-853-8883 or
via email at [email protected].
SYMBOL DESCRIPTIONS
Please observe user’s manual
Protection class BF
!
WARRANTY
This product is warranted to be free of manufacturing defects for a
period of 12 months from date of retail purchase. Defective product
should be directed to the place of retail purchase for exchange.
DC (Direct current)
Shouldthisnotbepossible,contactourcustomercaredepartmentfor
assistance and a return material authorization. No returns may be
made without a return authorization. Warranty exchanges require
proof of date of purchase (purchase receipt showing date, place and
product purchased).
0 1 2 3
This device is complied to American National Standard:
ANSI/AAMI SP10-1992.
This warranty does not cover product subjected to abuse, misuse,
accidental damage or tampering.
Manufacturer
:
IDT Technology Limited
9/F Kaiser Estate Phase 1
41 Man Yue Street
Hunghom, Kowloon
Hong Kong
IMPORTANT ADVICE - RETAIN FOR
FUTURE REFERENCE
For meaningful comparisons, it is suggested to measure the blood
pressureundersimilarconditions. Forexample, dailymeasurements
should be taken at approximately the same time or as suggested by
a medical professional. Physical activity may affect blood pressure;
restabout5minutesbeforeobtainingabloodpressuremeasurement.
Customer Assistance
:
Oregon Scientific, Inc.
19861 SW 95th Place
Tualatin, OR 97062
U.S.A.
Bloodpressuremeasurementsarenotatreatment.Initiatingtreatment
or making changes to a treatment regime should not be implemented
without first consulting a physician.
website address:
Measurement error will be indicated on the display. Check the cuff
and tubing for possible kinks or air leaks. Before attempting a
Download from Www.Somanuals.com. All Manuals Search And Download.
14
measurementagain, ensurethatthecuffisproperlyattached, thearm
is in the proper position and that movement has been minimized
during the measurement process.
If the device does not function:
-
Check that the unit is on. After about 3 minutes of inactivity,
the unit will automatically turn off.
-
Ensure that batteries are properly inserted. Batteries may be
exhausted and require replacement. A battery-low indicator
[
] will display to indicate that batteries are low and need
changing.
Measurement errors may occur in persons with very low blood
pressure or heart-rhythm irregularities. For individuals with special
health conditions consult a physician.
Note:
This device is intended for adult use only. Do not use
this unit on children without first consulting a physician.
CAUTION
-
-
-
The content of this manual is subject to change with-
out further notice.
Due to printing limitation, the displays shown in this
manual may differ from the actual display.
The contents of this manual may not be reproduced
without the permission of the manufacturer.
Download from Www.Somanuals.com. All Manuals Search And Download.
15
|