Optoma Technology Laser Pointer LR4 User Manual

S E T  
START  
TAB  
Vol  
AL  
T
Vol  
Wireless  
Laser Presenter  
Model No: LR4  
User Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Frequency Search  
Should the receiver not respond to the controller after installing the driver see “Installing the  
Wireless USB Receiver” on page 7, reset the transmission and reception frequency between  
controller and wireless USB receiver using the following procedure.  
1
2
Plug the wireless USB receiver into an available USB port.  
Press the Connect Key on the wireless USB receiver. The Status LED starts flashing.  
If the frequency search is not complete within 1 minute, the LED will still stop flashing.  
Remove the battery on the LR4.  
3
4
Press the Power button while re-install the battery.  
While inserting the battery, the LCD screen lights up for 1 second and then go out.  
Release the Power button after the LCD screen goes out.  
The Status LED will go out at the same time.  
5
6
The wireless transmission is reset. Now the LR4 is ready to use.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Introducing LR4 ..................................... 1  
Features .................................................... 1  
Package Contents .................................... 3  
LR4 Components ...................................... 4  
Additional Information......................... 13  
Operating the Laser .................................13  
Timer Quick Settings ...............................13  
OSD Backlight .........................................13  
Vibrate Alert .............................................14  
Frequency Search ...................................14  
Specifications ............................................ 5  
Laser Pointer Icons ...................................... 5  
Preparing for Use ...................................... 6  
Installing the Battery .................................... 6  
Removing the Wireless USB Receiver ........ 7  
Installing the Wireless USB Receiver .......... 7  
LR4 Menu Display.................................. 8  
Introducing the Display ............................. 8  
On-Screen Display (OSD) Modes ............. 9  
KEYBOARD (K/B) ....................................... 9  
MOUSE ..................................................... 10  
MEDIA Player ............................................ 10  
TIMER ........................................................11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHAPTER 1  
Introducing LR4  
This chapter details the uses, features, and installation of LR4  
1.1 Features  
Wireless USB Transceiver  
LR4 is an all-in-one transmitter and receiver. The wireless USB receiver separates from the  
main controller unit and plugs directly into any USB port. The controller can transmit up to 10  
meters.  
Remote Keyboard and Mouse  
Control the mouse or keyboard during presentations over the wireless connection.  
Remote Multimedia  
Use LR4 as a remote control for playing multimedia content.  
Laser Pointer Icons  
Project five different pointer images and enhance the appeal of your presentations.  
1GB USB Flash Drive (optional)  
LR4 wireless USB receiver is also a USB flash drive that can store up to 1GB of your data.  
Now you can carry all your multimedia and presentations in one convenient drive.  
LR4 User Manual Chapter 1 Introducing LR4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
Backlit LCD Menu  
Always know the current status of your LR4 with an easily viewable display.  
Navigation Pad  
The ergonomic LR4 provides simple thumb control for easy navigation of the LCD Menu and  
replacing the mouse during presentations.  
Countdown Timer  
Set the timer to countdown from up to 24 hours to remind you of important events, or how  
much time is left for your presentation.  
Vibrate Alarm  
The vibrate lets you discretely acknowledge timed alerts without creating a distraction.  
Power-saving Mode  
The LR4 will automatically turn off after 30-minutes standby.  
System Restore  
LR4 remembers and restore the previous state of operation after switching off or even  
changing the batteries.  
2
LR4 User Manual Chapter 1 Introducing LR4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1.2 Package Contents  
Please check the package contains the following items.  
User Manual  
S
E
T
START  
TAB  
Vol  
ALT  
Vol  
AAA Battery x 1  
LR4 and Wireless  
USB Receiver  
LR4 User Manual Chapter 1 Introducing LR4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
1.3 LR4 Components  
Controller Front View  
Controller Side View  
Laser Pointer  
Jog-wheel  
Power / Mode  
LCD  
S
E
T
START  
TAB  
Vol  
ALT  
Laser  
On / Off  
START/ALT/RMB  
SET/TAB/LMB  
Wireless USB  
Receiver  
Multifunction  
Navigation  
Pad  
Vol  
Controller Top View  
Connect Key /  
Status LED  
Laser Pointer  
Battery Cover  
4
LR4 User Manual Chapter 1 Introducing LR4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1.4 Specifications  
Dimensions  
13(L) x 3.5 (W) x 2.2 (T) cm  
78g (including battery)  
33 feet (10 meters)  
2.4G  
Weight  
Transmission Distance  
RF Frequency  
Interface  
USB 2.0  
OS Supported  
Laser Wavelength  
Output Power  
Power  
Windows 2000/Me/XP/Mac OS 9.0 & higher  
630~680nm  
CL IIIa, <5mW CL II, <1mW  
1x AAA 1.5V battery  
6 hours  
Battery Burn Time  
1.4.1 Laser Pointer Icons  
Warning  
Caution  
: Laser radiation is harmful to the eyes. Do not stare directly into the beam.  
: Use of controls, adjustments or procedures other than those specified in this  
manual could result in hazardous exposure to laser radiation.  
LR4 User Manual Chapter 1 Introducing LR4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
1.5 Preparing for Use  
1.5.1 Installing the Battery  
For first use, or should the battery indicator on the LCD show empty. Please use the following  
guidelines to install a new battery.  
1
2
3
Push the battery cover down and away from the controller.  
Align the AAA battery according to the (+) and (-) markings on the battery compartment.  
Replace the battery cover sliding back until it clicks into place.  
Caution:  
Only use the specified AAA battery.  
Insert battery according to (+) and (-) markings. Inserting the battery incorrectly may  
result in cracking or leakage, which may pose a risk of fire or lead to personal injury.  
Dispose of the battery in accordance with local laws and regulations. Please turn in  
your batteries at the responsible collecting point, or place of purchase.  
When the controller is not used for extended periods, please remove the battery.  
Warning: Never dispose of batteries in fire, as they could explode.  
6
LR4 User Manual Chapter 1 Introducing LR4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1.5.1.1 Powering LR4  
To switch LR4 on or off, press and hold the Power/Mode button for two seconds, at the same  
time, the LCD illuminates for 3 seconds. The LR4 will automatically turn off after 30-minutes  
standby.  
1.5.2 Removing the Wireless USB Receiver  
Locate the raised edge at the rear-end of the controller module.  
Push and slide out the wireless USB receiver.  
1.5.3 Installing the Wireless USB Receiver  
The wireless USB receiver is used like a regular USB  
flash drive. Plug the receiver directly into an available  
USB port of your notebook or computer. Windows 2000/  
XP/Mac OS 9.0 operating systems and later, the drive is  
automatically recognized and installed.  
S
E
T
START  
ALT  
TAB  
Vol  
USB  
Vol  
Note: If after installation, the USB receiver does not  
respond to the controller, please see “Frequency  
Search” on page 14 for how to match the  
frequency between controller and receiver.  
LR4 User Manual Chapter 1 Introducing LR4  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHAPTER 2  
LR4 Menu Display  
This chapter explains how to use the OSD menus  
2.1 Introducing the Display  
Full Display  
Keyboard (K/B)  
Controller  
Mouse Controller  
Media Player  
Countdown Timer  
(seconds)  
Timer  
Controller  
Countdown Timer  
(hours:minutes)  
Battery Indicator  
Select the desired mode  
Normal Display  
8
LR4 User Manual Chapter 2 LR4 Menu Display  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2.2 On-Screen Display (OSD) Modes  
LR4 has four modes of operation. Press the Power/Mode  
button to cycle though the different methods of using the  
controller.  
1
2
3
4
2.2.1 KEYBOARD (K/B)  
Press the Power/Mode button until K/B is highlighted on the OSD.  
Enter K/B mode to replace the computer keys.  
ALT + TAB  
Press ALT and then press TAB to scroll through open  
TAB ALT  
windows and programs.  
ALT  
TAB  
PgUp  
PgDn  
ESC  
F5  
ALT, TAB, PgUp, PgDn, ESC/F5 also replace their  
keyboard equivalents.  
The right-hand multifunction navigation pad button turns  
the screen blank.  
LR4 User Manual Chapter 2 LR4 Menu Display  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9
2.2.2 MOUSE  
Press the Power/Mode button until MOUSE is highlighted on the OSD.  
Enter MOUSE mode to replace the computer’s mouse.  
ALT replaces the right mouse button.  
ALT  
TAB  
TAB ALT  
TAB replaces the left mouse button.  
The multifunction navigation pad moves the mouse pointer.  
2.2.3 MEDIA Player  
Press the Power/Mode button until MEDIA is highlighted on the OSD.  
TAB ALT  
Enter MEDIA mode to play your media with the controller.  
Remotely play, pause, stop, skip tracks or adjust the volume.  
Vol  
Vol  
10  
LR4 User Manual Chapter 2 LR4 Menu Display  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2.2.4 TIMER  
Press the Power/Mode button until TIMER is highlighted on the OSD.  
Enter TIMER to set and start a countdown from a maximum of 24  
hours using HH:MM:SS.  
Press SET to start the timer and edit that value or press START  
to exit timer if countdown function is not needed.  
TAB ALT  
Add  
Press the plus(+)/minus(-) sign to increase/decrease the  
highlighted number.  
Press the left/right arrow to highlight the desired number to  
change.  
Decrease  
Press SET to stop the timer and edit that value.  
Press START to begin the countdown.  
LR4 User Manual Chapter 2 LR4 Menu Display  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11  
The following example details how to edit the timer settings.  
Add / Decrease  
Dec.  
Add  
Move right / left  
Move  
Move  
Quick Timer Setup: When starting the timer setting, press SET to setup the timer quickly.  
Press once to add 5 minutes, and so on.  
12  
LR4 User Manual Chapter 2 LR4 Menu Display  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHAPTER 3  
Additional Information  
This chapter details additional functions of LR4  
3.1 Operating the Laser  
While pressing the Laser Pointer button, rotate the jog-wheel  
and cycle through the various pointers to the desired icon.  
3.2 Timer Quick Settings  
To quickly set the timer, press the Mode/Power button until TIMER is highlighted. Now press  
SET, the countdown setting increases by 5 minutes with each subsequent press (i.e.  
5,10,15,20), until the maximum of 24-hours is reached.  
3.3 OSD Backlight  
The controller’s OSD is backlit for viewing under virtually any lighting conditions, and turns on  
for three seconds after the following events.  
Pressing the Power/Mode button  
Pressing the PgDn (down arrow) on the multifunction navigation pad during K/B  
(keyboard) mode  
Note: During Timer mode, the backlight remains illuminated.  
LR4 User Manual Chapter 3 Additional Information  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3.4 Vibrate Alert  
LR4 has a vibrate alert to discretely inform:  
The final three minutes of the timer; three short vibrations  
The final minute of the timer; short vibration  
When the timer reaches zero; long vibration  
3.5 Frequency Search  
Should the receiver not respond to the controller after installing the driver see “Installing the  
Wireless USB Receiver” on page 7, reset the transmission and reception frequency  
between controller and wireless USB receiver using the following procedure.  
1
2
Plug the wireless USB receiver into an available USB port.  
Press the Connect Key on the wireless USB receiver. The Status LED starts flashing.  
If the frequency search is not complete within 1 minute, the LED will still stop flashing.  
3
4
Remove the battery on the LR4.  
Press the Power button while re-install the battery.  
While inserting the battery, the LCD screen lights up for 1 second and then go out.  
5
6
Release the Power button after the LCD screen goes out.  
The Status LED will go out at the same time.  
The wireless transmission is reset. Now the LR4 is ready to use.  
14  
LR4 User Manual Chapter 3 Additional Information  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Miele Washer W 1215 User Manual
Milan Technology Network Card CCSF30XX 100 User Manual
Newcon Optik Binoculars 20x40x100 User Manual
Nilfisk ALTO Vacuum Cleaner Attix 19AE User Manual
Nortel Networks Answering Machine Norstar Voice Mail 40 User Manual
NXP Semiconductors Switch PiP3209 R User Manual
Omega Engineering Marine Instruments CN1001 RTD User Manual
Omega Vehicle Security Automobile Alarm 533i 3 User Manual
Panasonic Power Supply IMC80A User Manual
Paradyne Network Router Hotwire 7984 User Manual