T-4711
FM Stereo / AM Tuner
FM Stereo Tuner
All models except European models
(FM Stereo / AM Tuner)
European model
(FM Stereo Tuner)
T-4711
T-4711
Instruction Manual
CONTENTS
Features..............................................................................................................................................2
Important safeguards .........................................................................................................................3
Precautions.........................................................................................................................................3
Before using this unit.........................................................................................................................4
System connections ...........................................................................................................................5
Antenna connections..........................................................................................................................6
Control positions and names..............................................................................................................8
Connecting the power........................................................................................................................9
Receiving stations............................................................................................................................10
Receiving RDS ................................................................................................................................13
Entering characters ..........................................................................................................................15
Setting the clock .............................................................................................................................16
Using the timer (for remote control only)........................................................................................18
Specifications...................................................................................................................................20
Troubleshooting guide.....................................................................................................................20
Download from Www.Somanuals.com. All Manuals Search And Download.
18. Servicing – The user should not attempt to service the appliance beyond
that described in the operating instructions. All other servicing should be
referred to qualified service personnel.
Important safeguards
19. Outdoor Antenna Grounding – If an outside antenna is connected to
the receiver, be sure the antenna system is grounded so as to provide some
protection against voltage surges and built up static charges. Article 810 of
the National Electrical Code, ANSI/NFPA 70, provides information with
regard to proper grounding of the mast and supporting structure, ground-
ing of the lead-in wire to an antenna discharge unit, size of grounding con-
ductors, location of the antenna-discharge unit, connection to grounding
electrodes, and requirements for the grounding electrode. See Figure 73.1.
1. Read Instructions – All the safety and operating instructions should be
read before the appliance is operated.
2. Retain Instructions – The safety and operating instructions should be
retained for future reference.
3. Heed Warnings – All warnings on the appliance and in the operating
instructions should be adhered to.
4. Follow Instructions – All operating and use instructions should be fol-
FIGURE 73.1:
lowed.
EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELEC-
TRICAL CODE
5. Water and Moisture – The appliance should not be used near water –
for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet
basement, or near a swimming pool, and the like.
6. Carts and Stands – The appliance should be used only with a cart or
stand that is recommended by the manufacturer.
ANTENNA
LEAD IN
WIRE
6A. An appliance and cart combination
should be moved with care. Quick
GROUND
CLAMP
PORTABLE CART WARNING
stops, excessive force, and uneven
surfaces may cause the appliance
and cart combination to overturn.
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
S3125A
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
7. Wall or Ceiling Mounting – The appliance should be mounted to a
wall or ceiling only as recommended by the manufacturer.
NEC – NATIONAL ELECTRICAL CODE
S2898A
8. Ventilation – The appliance should be situated so that its location or
position does not interfere with its proper ventilation. For example, the
appliance should not be situated on a bed, sofa, rug, or similar surface that
may block the ventilation openings; or if placed in a built-in installation,
such as a book case or cabinet that may impede the flow of air through the
ventilation openings, there should be free space of at least 20 cm and open
up behind the appliance.
Precautions
9. Heat – The appliance should be situated away from heat sources such as
radiators, heat registers, stoves, or other appliances (including amplifiers)
that produce heat.
1. Warranty Claim
You can find the serial number of the rear panel. In case of warranty
claim, please report this number.
10. Power Sources – The appliance should be connected to a power supply
only of the type described in the operating instructions or as marked on the
appliance.
2. Care
From time to time you should wipe the front and rear panels and the
cabinet with a soft cloth. For heavier dirt, dampen a soft cloth in a
weak solution of mild detergent and water, wring it out dry, and wipe
11. Polarization – If the appliance is provided with a polarized plug having
one blade wider than the other, please read the following information: The
polarization of the plug is a safety feature. The polarized plug will only fit
the outlet one way. If the plug does not fit fully into the outlet, try revers- off the dirt. Following this, dry immediately with a clean cloth. Do not
ing it. If there is still trouble inserting it, the user should seek the services
use rough material, thinners, alcohol or other chemical solvents or
of a qualified electrician. Under no circumstances should the user attempt
cloths since these could damage the finish or remove the panel letter-
to defeat the polarization of the plug.
ing.
12. Power-Cord Protection – Power-supply cords should be routed so that
3. Power
WARNING
they are not likely to be walked on or pinched by items placed upon or
against them, especially near plugs, convenience receptacles, and the point
where they exit from the appliance.
BEFORE PLUGGING IN THE UNIT FOR THE FIRST TIME,
READ THE FOLLOWING SECTION CAREFULLY.
13. Cleaning – The appliance should be cleaned only as recommended by
●
Some models are designed for use only with the power supply
the manufacturer.
voltage of the region where they are sold.
14. Power Lines – An outdoor antenna should be located away from power
U.S.A. and Canadian models:
European model:
AC 120 V, 60 Hz
AC 230 V, 50 Hz
lines.
15. Nonuse Periods – The power cord of the appliance should be unplugged
Worldwide model:
AC 120 V/220 – 230 V switchable,
50/60 Hz
from the outlet when left unused for a long period of time.
●
Voltage Selector (Rear Panel)
16. Object and Liquid Entry – Care should be taken so that objects do not
Worldwide models are equipped with a voltage selector to con-
form with local power supplies. Be sure to set this switch to match
the voltage of the power supply in your area before turning the
power button on. (See “Setting the voltage selector and Tuning
step frequency (Worldwide models only)”, P. 4.) Models without a
voltage selector can only be used in areas where the power supply
is the same as that of the unit.
fall and liquids are not spilled into the enclosure through openings.
17. Damage Requiring Service – The appliance should be serviced by
qualified service personnel when:
A. The power-supply cord or the plug has been damaged; or
B. Objects have fallen, or liquid has been spilled into the appliance; or
C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate normally or exhibits a
marked change in performance; or
E. The appliance has been dropped, or the enclosure damaged.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using this unit
Setting the voltage selector
and Tuning step frequency
(Worldwide models only)
Voltage selector
1. Determine the proper voltage for your area:
REMOTE
OUTPUT
ANTENNA
B
CONTROL
220 – 230 V or 120 V.
A
FM75Ω
AM
L
FM STEREO AM TUNER
/
MODEL NO. T-4711
RATING: AC120/220-230V
50/60Hz 12W
VOLTAGE SELECTOR
FREQ. STEP
2. If the preset voltage is not correct for your
area, insert a screwdriver into the groove
in the switch. Slide the switch all the way
to the right (120 V) or to the left (220 –
230 V), whichever is appropriate.
R
2-1,NISSHIN-CHO,NEYAGAWA-SHI,OSAKA,
JAPAN
MADE IN JAPAN
USA
OTHER
220-230V
120V
AC OUTLETS
SWITCHED
TOTAL 500W MAX.
WARNING
AVIS
RISK OF ELECTRIC SHRISQUE DE CHOC ELECTRIQUE
DO NOT OPE
NE PAS OUVRIR
Tuning step frequency
VOLTAGE SELECTOR
FREQ. STEP
Wooldwide models are equipped with a
switch that controls the AM (9 kHz/10 kHz)
and FM (50 kHz/200 kHz) bands tuning
steps. Please set this switch to match the tun-
ing step frequency in your area.
USA
OTHER
220-230V
120V
U.S.A.
: AM 10 kHz, FM 200 kHz
(25 kHz, Fine mode)
Other areas : AM 9 kHz, FM 50 kHz
(25 kHz, Fine mode)
Inserting the remote control
batteries
Please insert the batteries into the remote control according to the illustration.
Remove the battery compartment cover by
opening it as shown in the illustration. Load
three R6 (UM-3) AA size batteries into the
remote control with the plus (+) and minus
(–) terminals positioned as indicated by the
diagram inside the battery compartment and
close the cover.
-
+
3
1
2
+
-
-
●
●
●
Remove dead batteries immediately to
avoid corrosion damage.
To avoid potential corrosion damage,
never mix old batteries with new ones.
The manganese batteries supplied with
this unit have a service life of approxi-
mately six months, depending on fre-
quency of usage.
T-4711
●
This unit comes equipped with R6 (UM-
3) AA manganese batteries, but we rec-
ommend that long-life alkaline batteries
LR6 (AM-3) AA be used when replacing
the batteries.
Remote control sensor
30˚
Using the remote control
30˚
The following information will help you get
optimum use from the remote control.
approx. 5m
●
Place this unit away from direct bright
light, which can prevent proper operation
of the remote control.
●
Make sure audio rack doors do not have
coloured glass. If this unit is placed
behind such a door, this may prevent
proper remote control operation.
Remote control
●
Using other remote controls in the same
room as this unit remote control may
cause interference.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
System connections
●
Do not plug in the power cord until all connections have been made.
●
On each pair of input or output jacks, the lower jack (marked R) corresponds to the right channel, and the upper jack (marked L) to the left
channel.
Tuning Step Frequency
(See page 4. Worldwide model only)
To wall outlet
Configuration and the number
of outlets may vary depending
on places of destination.
2
REMOTE
OUTPUT
ANTENNA
B
CONTROL
A
FM75Ω
AM
L
FM STEREO / AM TUNER
MODEL NO. T-4711
RATING: AC120/220-230V
VOLTAGE SELECTOR
FREQ. STEP
50/60Hz
12W
R
2-1,NISSHIN-CHO,NEYAGAWA-SHI,OSAKA,
MADE IN JAPAN
USA
OTHER
JAPAN
220-230V
120V
AC OUTLETS
SWITCHED
TOTAL 500W MAX.
WARNING
AVIS
RISK OF ELECTRIC SHOCK RISQUE DE CHOC ELECTRIQUE
DO NOT OPEN
NE PAS OUVRIR
Voltage selector
(See page 4. World
wide model only)
1
3
Antenna connection
(See pages 6-7.)
L
R
Amplifier
1 Connecting the amplifier:
Connect the tuner’s OUTPUT jacks and the amplifier’s INPUT jacks
using the audio connection cable. Refer to the amplifier’s instruction
manual for connections.
Amplifier
2 AC outlets (SWITCHED)
The shape, orientation, the number and total capacity of the AC outlets
may differ according to the model and the area where the unit is pur-
chased. Be careful that other components connected to this unit do not
exceed the capacity that is printed on the rear panel below under the
AC outlets.
A-9711
CD player
When connecting other Integra series components (such as the A-
9911/9711, DX-7911/7711 or TA-6711), connect the power cords of
those components to this unit’s AC outlets.
The unit may be turned ON or OFF according to the setting of
POWER button, ON or OFF, respectively.
T-4711
When this unit is used as a timer, the other components that will be
switched on and off should be connected to this unit’s AC outlets.
3 Connections for remote control
When this is connected to an amplifier with the Onkyo 7 jack, you
are able to operate it by pressing the TUNER buttons on the amplifi-
er’s supplied remote control.
Cassettedeck
NOTE:
An 7 remote control cable equipped with a 1/8″ (3.5 mm) diameter
miniature two-conductor phone plug is included with this unit and
with every compact disc player and cassette deck with the 7 mark.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Antenna connections
Connecting the 300 ohm
ribbon wire to the 75/300 ohm
adaptor (for models other than
European models)
FM/TV
Outdoor
Antenna
Loosen the serews and wrap the wire around
these screws, Then tighten the screw with a
screwdriver.
300 ohm
ribbon wire
Connecting the coaxial cable
to the 75/300 ohm adaptor
(for models other than
European models)
1
2
3
6
3
6
mm mm mm
Slit B
15mm
1. With your fingernail or a small screw-
driver, press the stoppers outwardts and
remove the cover.
1
Wire A
2. Remove the transformer wire A from slit
B and insert it into slit C.
Slit C
3. Prepare the coaxial cable as shown in the
diagram. Connect the 75/300 ohm antenna
adaptor to the coaxial cable.
2
1 Insert the end of the cable.
2 Clamp it in place with pliers.
Directional linkage
Do not use the same antenna for both FM and
TV (or VCR) reception since the FM and TV
(or VCR) signals can interfere with each
other. If you must use a common FM/TV (or
VCR) antenna, use a directional linkage type
splitter.
Directional linkage
type slitter
To Tuner
To TV (or VCR)
Assembling the AM loop
antenna
Assemble the loop antenna as shown in the
illustration.
Insert into the hole.
Connecting the antenna cable
1
2
3
1. Press down the lever.
2. Insert wire.
3. Return the lever.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the enclosed
T-shaped FM antenna
The T-shaped FM antenna is for indoor use
only. Extend the antenna and move it in vari-
ous directions until the clearest signal is
received. Fix it with push pins or similar in
the position giving the least amount of distor-
tion.
For European
models
For models other than European models
ANTENNA
ANTENNA
FM75Ω
A
FM75Ω
B
AM
GND
A
B
Connecting an FM outdoor
antenna
If the reception is not very clear with the
attached T-shaped FM antenna, the use of an
external antenna is recommended.
For European
models
For models other than European models
ANTENNA
Please make sure that you comply with the
following considerations regarding the loca-
tion.
ANTENNA
FM75Ω
A
FM75Ω
B
AM
GND
A
B
Keep the antenna away from noise sources
(neon signs, busy roads etc.)
It is dangerous to put it close to power lines,
so keep it well away from power lines, etc.
Connecting the enclosed AM
loop antenna (For models
other than European models)
The AM loop antenna is for indoor use only.
Set in the direction and position where you
receive the clearest sound. Put it as far as pos-
sible away from the main unit, TV set,
speaker cables and power cord.
For models other than
European models
ANTENNA
B
A
FM75Ω
AM
Connecting an AM outdoor
antenna (For models other
than European models)
When reception is not satisfactory by the use
of the attached AM loop antenna alone, con-
nection of the external antenna is recom-
mended. (Do not remove the AM loop
antenna)
ANTENNA
B
A
FM75Ω
AM
The external antenna will be more effective if
you stretch it horizontally in a high place
above a window or outside.
For models other than
European models
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Control positions and names
Front Panel
The button positions may differ slightly depending on the country of purchase.
(For models other than European models)
1 2
3
4
5
6
7
PRESET / TUNING
POWER
DISPLAY
DIMMER
GROUP
SCAN
MODE
STAND-BY/ON
PRESET/
TUNING
RDS
BAND
IF BAND HI-BLEND
MEMORY
R D S
CLEAR
FM STEREO / AM TUNER T-4711
8
9 10 11
12 13 14 15
(For European models)
STAND-BY/ON
RDS
IF BAND HI-BLEND
R D S
8 10 11
e
a
b
c
d
f
g
h
i
j
TIMER ANTENNA
RDS
TUNED STEREO MONO NORMAL NARROW HI-BLEND AUTO FINE MEMORY
W.DAY
W.END
ONCE
A
B
TP TA
SLEEP SIGNAL STRENGTH
k
l
NOTE:
If there is a protective film on the surface of the display, which is making it difficult to read the display, remove it.
For more information about buttons, turn to the page number in the [ ].
Front Panel
The display and indicator
1. Power Indicator
a. Timer Mode Indicators
b. Antenna Indicators
c. RDS Indicators
2. Power Button (POWER) [9, 18]
3. Remote Control Sensor [4]
4. Display Button (DISPLAY) [12, 14]
5. Group Button (GROUP) [10, 11]
d. Tuned Indicator
e. Stereo/Mono Indicator
f. IF-Bandwidth Indicator
g. Hi-Blend Indicator
h. Auto Tuning Indicator
i. Fine Tuning Indicator
j. Memory Indicator
k. Signal strentgh level Display
l. Multi Display
6. Scan Button (SCAN) [13, 14]
7. Preset/Tuning Dial (PRESET/TUNING) [10, 11, 15]
8. RDS Button (RDS) [13, 14]
9. Band Selector Button (BAND) [10]
(* Not available on the European model)
10.IF Bandwidth Selector Button (IF BAND) [12]
11.Hi-Blend Selector Button (HI-BLEND) [12]
12.Dimmer Button (DIMMER) [11]
13.Memory Button (MEMORY) [10, 11, 15]
14.Mode Button (MODE) [11, 12, 15, 18, 19]
15.Preset/Tuning Button (PRESET/TUNING) [10, 11, 15]
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control
1. Power Button (POWER) [9, 18]
2. Number Buttons (1 ~ 9, 0/10) [10, 17]
3. Memory Button (MEMORY) [10, 11, 15]
4. Timer preset Buttons (TIMER PRESET) [16, 17, 18]
5. Antenna Selector Button (ANTENNA) [10, 12]
6. Dimmer Button (DIMMER) [11]
5
6
7
POWER
ANTENNA DIMMER
1
2
3
4
1
3
6
GROUP
PRESET
2
5
7. Group Button (GROUP) [10, 11]
8. Preset memory up/down Buttons (PRESET a/b) [11]
9. Scan Button (SCAN) [13, 14]
4
7
8
8
9
10.Tunning up/down Buttons (TUNING a/b) [10]
11.Adjust Button (ADJUST) [16, 17]
MEMORY
0/10
TUNING
SCAN
12.Display Button (DISPLAY) [12, 14]
9
10
TIMER
ADJUST
DISPLAY
ENTER
MODE
TIMER
PRESET
11
12
REMOTE CONTROL RC-315T
Connecting the power
1. Insert the AC power supply cord into a wall outlet.
“0:00” flashes.
2. When you press the POWER button, the display will light.
1
To a wall outlet
2
Remote control
POWER
POWER
or
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Receiving stations
2
1 (other than Europe)
6
3 4, 7
6
7
4
T-4711
5, 8
4
5, 8
In order to listen to a radio broadcast, first tune in the radio station,
then set it. The radio station can be selected in two ways: by using the
auto-tuning function or by directly entering the station’s frequency.
When tuning in the radio station, refer to page 12 for more informa-
tion on how to get the best reception possible.
1
BAND
Tuning the radio and presetting stations
1. (For models other than European models) Use the BAND button
to select either FM or AM.
2. (When selecting an FM station) Use the ANTENNA button on
the remote control to select the antenna.
3. Press the PRESET/TUNING button until Tuning Mode is
selected.
2
3
4
Remote control
ANTENNA
ANTENNA
A
B
● With each press of the button, the mode changes one at a time in
the following sequence:
ANTENNA
A
TUNED STEREO
NARROW
PRESET/
TUNING
SIGNAL STRENGTH
PRESET → TUNING → CHARACTER
Continue pressing the PRESET/TUNING button until “TUN-
ING” appears on the display.
● When using the remote control, press the TUNING a/b buttons.
4. Tune in the station.
Remote control
PRESET / TUNING
1
3
2
Remote
control
To tune in a station using the PRESET/TUNING dial:
Turn the PRESET/TUNING dial either clockwise or counterclock-
wise to begin auto-tuning. Once a station is tuned in, auto-tuning
will stop. When using the remote control, hold down the TUNING
a or b button for more than 0.5 second to begin auto-tuning.
● To select another station, turn the PRESET/TUNING dial again
and the next station will be tuned in.
5
6
4
7
TUNING
or
or
8
9
0/10
ANTENNA
A
TUNED STEREO
NARROW HI-BLEND AUTO
● If the station’s frequency is weak and auto-tuning is not be able
to tune it in, refer to page 12.
SIGNAL STRENGTH
To tune in a station by directly entering the station’s fre-
quency:
Use the number buttons to enter the station’s frequency.
● For example, if the station frequency is 88.10 MHz, press 8
twice, then press 1, and then 0.
● If no radio station can be received at the entered frequency, the
unit will decrease the frequency until the station nearest to the
entered frequency is received.
5
6
Remote control
MEMORY
MEMORY
EO
NARROW HI-BLEND AUTO
MEMORY
or
● If you have accidently entered the wrong frequency, try entering
the correct frequency again.
5. Press the MEMORY button. The MEMORY indicator will
light up and the number of an available preset channel will
flash on the display.
6. Use the GROUP buttons to select the group in which you wish
to preset the station.
Remote control
EO
NARROW HI-BLEND AUTO
MEMORY
GROUP
GROUP
or
You can select from A, B, C or D.
(Continued on page 11)
10
Download from Www.Somanuals.com. All Manuals Search And Download.
7. When the flashing channel is not the desired channel, turn the
PRESET/TUNING dial and select a different channel.
● If a station frequency has already been memorized in the
selected channel, the channel number will flash quickly.
● Each group contains ten channels.
PRESET / TUNING
Remote control
7
PRESET
NARROW HI-BLEND AUTO
MEMORY
or
● The channel can also be entered using the number buttons on the
remote control. If this is done, skip step 8.
8. Press the MEMORY button.
Remote control
8
NOTE:
MEMORY
MEMORY
TUNED STEREO
NARROW HI-BLEND AUTO
MEMORY
●
40 channels are available for storing preset stations.
or
Selecting a preset station
PRESET/
TUNING
1
ANTENNA
A
TUNED STEREO
NARROW
1. Press the PRESET/TUNING button until Preset Mode is
selected.
SIGNAL STRENGTH
With each press of the button, the mode changes one at a time in
the following sequence:
Remote control
2
3
GROUP
PRESET → TUNING → CHARACTER
or
GROUP
Continue pressing the PRESET/TUNING button until “PRESET”
appears on the display.
Skip this step if the remote control is used.
PRESET / TUNING
Remote control
PRESET
2. Use the GROUP button to select a group (A ~ D).
3. Use the PRESET/TUNING dial to select the desired channel.
or
To select a preset station using the remote control:
Press the PRESET a/b buttons.
To cancel a preset station:
MEMORY
MODE
1. Select the preset station as explained in the previous section.
2. While holding the MEMORY button, press the MODE button.
“--” will be shown on the MEMORY channel display.
Scanning through the preset channels
(Preset Scan Tuning)
1
2
1. Press the GROUP button, then select the group that you wish to
scan.
Remote control
Remote control
SCAN
2. Press the SCAN button.
GROUP
P
SCAN
GROUP
or
or
● The stations in the preset channels are played one after another
for a few seconds each. Once you have found a station that you
wish to continue listening to, press the SCAN button again to
stop scanning.
● If only one station has been stored in the selected group, the
channels are not scanned.
Using the DIMMER button
Remote control
DIMMER
DIMMER
or
The part of the display that is lit up changes with each press of the
DIMMER button in the following sequence: Entire display lights up
→ Section [a] goes off → Section [b] also goes off → Entire display
goes off → Entire display lights up...
a
b
If the DIMMER button is pressed in stand-by mode:
In stand-by mode, each press of the DIMMER button changes the
time display to one of the four brightness levels.
TIMER ANTENNA
RDS
TP TA
TUNED STEREO MONO NORMAL NARROW HI-BLEND AUTO FINE MEMORY
W.DAY
W.END
ONCE
A
B
SLEEP SIGNAL STRENGTH
c
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Receiving stations
ANTENNA
STEREO Indicator
HI-BLEND
IF BAND
DISPLAY
T-4711
MODE
Signal Strength Indicator
DISPLAY
Getting a better FM reception
Auto tuning setting (“AUTO” lights up.): Turn the PRESET/
TUNING dial to begin auto-tuning. The frequency changes in
steps of 50 kHz (or 200 kHz) when tuning an FM station or in
steps of 9 kHz (or 10 kHz) when tuning an AM station.
* The steps in which the frequency is changed differ according to the
country of purchase. The frequency steps shown in ( ) are for the
USA and Canadian model.
■ APR (Automatic Precision Reception) System
The APR system is Onkyo’s unique computer-controlled system
which automatically chooses the appropriate settings according to
the quality of the FM signal currently being received. This system
selects the appropriate Mode (STEREO or MONO), turns on the
Hi-blend function when the stereo broadcast contains noise in its
higher frequencies, and switches the IF band function to NAR-
ROW when the FM station signal is mixed with interference from
other stations.
Manual fine setting (“FINE” lights up.): Turn the PRESET/
TUNING dial to manually tune in the station. The FM frequency
changes in steps of 25 kHz.
Manual fine monaural setting (“FINE” and “MONO” light up.):
This setting is like the previous one, except it plays the broadcast
in MONO so that even a station with a weak signal can be
received.
● If the FM broadcast is received as a monaural signal, the STE-
REO indicator goes off.
● If the quality of the signal changes once the APR system has
adjusted the settings, the APR system will not automatically
readjust the settings. Change the settings by pressing the buttons
(IF BAND, HI-BLEND, MODE) on the main unit.
■ ANTENNA Button
If antennas have been connected to both the A and B FM antenna
connectors on the rear panel, select the one with better sensitivity
using the ANTENNA button on the remote control.
The antenna A/B selection status will be memorized at the Preset
Station Buttons.
■ IF BAND button
When FM stations are mixed or there is interference, this button
corrects this as much as possible. Each press switches it as follows:
NORMAL/NARROW.
Normal mode (NORMAL) is selected for normal reception. Nar-
row mode (NARROW) is selected when other stations may be at
frequencies that are close to the desired station.
■ FM Stereo Indicator (STEREO)
This indicator lights up when an FM stereo broadcast is being
received. It does not light when a weak FM stereo broadcast is
being received.
NOTE:
Depending on the radio station signal, it may be difficult to receive
RDS broadcasts when IF BAND is set to NARROW. If this is the
case, set IF BAND to NORMAL.
■ Signal Strength Indicator
Optimum tuning points are indicated by the number of lighted seg
■ HI-BLEND button
ments.
Weak FM stations may exhibit noisy and hissy sound quality in
stereo mode. The high blend circuit blends only the highest fre-
quencies into mono, while the rest of the audio range remains in
stereo, with substantially reduced noise and hiss.
Each press switches between ON or OFF.
SIGNAL STRENGTH
Hold down the DISPLAY button to display “FM Signal” and the
signal strength in decibels (dB).
■ Displaying station information
During FM reception of any RDS station with PS, or when charac-
ters are being entered, the PS, or character information is dis-
played.
■ MODE button
If an AM station is being received, this button switches the mode
between auto-tuning and manual tuning.
If an FM station with a very weak and noisy signal is received,
improve the situation by switching to monaural, even if it is a ste-
reo broadcast. At this time, the MONO indicator will light up.
When it is noisy, turning ON HI-BLEND is also effective.
The three settings that can be selected with the MODE button can
be used to improve the reception of FM stations with weak signals.
When you want to see the frequency, press the DISPLAY button.
Press it again to return to the original display.
If there is no PS or character display, the frequency will be dis-
played.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Receiving RDS
RDS reception is only available in areas where RDS broadcasts are
available. However, if radio reception is weak. RDS may not be
received.
PTY Classifications in USA
PTY Classifications in Europe
1. NEWS (News reports)
1. NEWS
2. Information
3. Sports
4. Talk
2. Current Affairs
(Current Affairs)
What is RDS?
Many FM stations now transmit RDS signals which give additional
information. RDS provides you with various services so that (for
example) you can choose a station broadcasting your favorite catego-
3. Information (Information)
4. Sport (Sport)
5. Rock
5. Education (Education)
6. Drama (Drama)
ries of music, or other information. The information below is avail- 6. Classic Rock
able on this unit.
7. Adult Hits
8. Soft Rock
9. Top 40
7. Culture (Culture)
PS: Program Service Name
PTY: Program Type
TP: Traffic Program
AF: Alternative Frequency list
RT: Radio Text
8. Science
(Science and technology)
10. Country
11. Oldies
9. Varied (Varied)
10. Pop Music (Pop Music)
11. Rock Music (Rock Music)
12. Soft
CT: Clock Time
13. Nostalgia
14. Jazz
12. M.O.R. Music
(Middle of the road music)
15. Classical
16. R & B
For models other than European models
SCAN
13. Light Classics
(Light Classics)
17. Soft R & B
18. Language
19. Religious Music
20. Rligious Talk
21. Personality
22. Public
14. Serious Classics
(Serious Classics)
15. Other Music (Other Music)
T-4711
* Alarm: When an RDS station
is making an emer-
gency broadcast, this
PTY will appear on
the display, and flash
on and off.
RDS
* Alert: When an RDS station
is making an emer-
gency broadcast, this
PTY will appear on
the display, and flash
on and off.
For European models
SCAN
T-4711
RDS
How to search for a station which broadcasts
your favorite category (PTY scan)
RDS
1
(For models other than European models)
RDS
1. Press the RDS button, and the program type of the currently
selected station will be shown on the display.
If the station you are receiving is not broadcasting RDS, “Prog
Type?” will be shown on the display.
2. Use the PRESET/TUNING dial to select your favorite program
type (PTY) (for example, “Sport”).
(For European models)
PRESET / TUNING
2
3
TUNED STEREO
NARROW
See the PTY description below.
3. Press the SCAN button to start searching for the chosen PTY.
When a station is received with the desired PTY, the scanning
stops for approximately 5 seconds, before the unit starts scan-
ning again.
4. When the desired station is reached, press SCAN again to stop
scanning.
4
SCAN
D
SCAN
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Receiving RDS
Receiving RDS traffic information
(For models other
1
than European models)
RDS
1. Press the RDS button until “TP Search” appears on the display.
2. Press the SCAN button to start searching for a TP station.
When the unit receives a TP station, it stops scanning. If the unit
cannot receive any signal, “Not find” (cannot find the station) is
shown on the display.
STEREO
NARROW
AUTO
RDS
(
F
o
r
European model)
NOTE:
If the TP indicator in the top left of the display lights up, the current
station is broadcasting traffic information.
2
SCAN
Searching for the station which sends the clearest
and strongest signal. (AF search)
(For models other
1
2
than European models)
RDS
RDS
STEREO
NARROW
AUTO
If the station you are listening to is not an RDS station, this search
function cannot be used.
1. Press the RDS button until “AF Search” appears on the display.
2. Press the SCAN button to start searching for the strongest sig-
nal that this station can be received on.
(For European model)
If an AF list cannot be received, “No AF List” is shown on the dis-
play.
SCAN
Displaying Radio Text (RT)
If the station you are listening to is not an RDS station, this function
cannot be used.
1. Each time you press the DISPLAY button, the display changes as
follows.
Depending on the radio station that you are listening to, some
items are not displayed.
When an RDS station is being received:
DISPLAY
Frequency
Program Service Name
Radio Text
Clock
When an RDS station is not being received:
Character (“No Character” is displayed
if characters have not been entered)
Frequency
Clock
When RT is received, it can sometimes take between a few seconds and
15 seconds (more or less) to show RT on the display.
Sometimes the following messages will be shown on the display.
Wait Radio Text: indicates that it requires more time to receive the
RT information. When the information is received, the characters will
scroll across the display.
No Radio Text: this appears for 3 seconds and indicates that even
though an RDS station is being received, there is no RT information
included.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Entering characters
2
3
The following characters can be used.
ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz!
“ & % ’ ( ) * + , - . / = ? : ; < > [ ] | @ \
0123456789
T-4711
4, 5
Entering new characters
1
2
If the station you are currently listening to on the T-4711 is an RDS sta-
tion, the program service name has priority over other information.
Therefore you will not be able to enter characters for the station name.
1. Select the station you wish to name (see previous sections).
2. Press the PRESET/TUNING button until Character Mode is
selected.
ANTENNA
A
TUNED STEREO
NARROW HI-BLEND AUTO
MEMORY
SIGNAL STRENGTH
With each press of the button, the mode changes one at a time in
the following sequence:
TUNED STEREO
NARROW
PRESET → TUNING → CHARACTER
PRESET/
TUNING
Continue pressing the PRESET/TUNING button until “PRESET”
appears on the display.
TUNED STEREO
NARROW
After a few seconds, “[_
]” appears on the display.
3. Use the PRESET/TUNING dial to select a character.
4. Press the MEMORY button to store the character.
Repeat the procedures 3 and 4 to store more characters. You can
store up to 8 characters in all.
When you want to leave a space between characters, press the
MEMORY button. The bar moves on to the next position.
5. Press the MEMORY button while the underline is at the
eighth character position to finish entering characters.
3
PRESET / TUNING
ANTENNA
A
TUNED STEREO
NARROW
SIGNAL STRENGTH
NOTE:
●
If you have not pressed a button for 16 seconds, the operation will
complete automatically.
●
Use the procedure mentioned above to change characters that have
already been entered.
4
5
I
MEMORY
ANTENNA
A
TUNED STEREO
NARROW
Changing the characters while they are being entered:
Before pressing the MEMORY button to finish entering the charac-
ters, press the PRESET/TUNING button to change the flashing “_”
SIGNAL STRENGTH
within the brackets to “
”. Turn the PRESET/TUNING dial to
move “ ” until it is at the character that you wish to change, then
press the PRESET/TUNING button so that “_” appears. After using
the PRESET/TUNING dial to select the correct character, press the
MEMORY button to finish entering the characters.
ANTENNA
A
TUNED STEREO
NARROW
SIGNAL STRENGTH
D
MEMORY
ANTENNA
A
TUNED STEREO
NARROW
SIGNAL STRENGTH
Clearing all the characters stored in memory
MEMORY
MODE
1. After choosing the station whose characters you wish to clear,
press the PRESET/TUNING button until Character Mode is
selected.
2. When “[_
]” appears on the display, hold down the
MEMORY button and press the MODE button.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the clock
1
2, 4
3
This unit features “ACCUCLOCK”-an automatic clock adjusting fea-
ture using RDS broadcast signals.
1
Remote control
Using the ACCUCLOCK function to set the clock
(for remote control only)
ADJUST
NOTE:
●
Before setting the clock, be sure to preset a station frequency.
Make sure that your FM antenna has been properly connected as
explained in page 7. It is strongly recommended that you install an
outdoor FM antenna since the attached T-shaped FM antenna may
not be able to receive RDS broadcasts well enough to allow
ACCUCLOCK function properly.
●
2
Remote control
ENTER
●
The clock will display the time in 24 hours. For example, 5:30 pm
will be displayed as “17:30”.
(Carry out the following procedure in STAND-BY.)
1. Press the ADJUST button until “ACCUCLOCK On (Off)” is
displayed.
If “ACCUCLOCK Off” is displayed, press the a/b buttons until
“ACCUCLOCK On” is displayed.
2. Press the ENTER button to display a preset station frequency.
3. Press the A/B buttons to tune in a station.
It is recommended to tune in a station with a clear reception.
4. Press the ENTER button.
3
Remote control
TIMER
TIMER
The day and time appear on the display and “AUTO” flashes.
After a short while, “AUTO” lights up.
PRESET
After the clock is initially set, it will be adjusted periodically.
NOTE:
●
Even if an RDS signal is present, the signal may not be strong
enough to allow the ACCUCLOCK to automatically set the time.
If this occurs, set the clock manually. (See page 17.)
You may wish to adjust the clock yourself because the time infor-
mation may differ depending on the RDS station detected. If so,
follow the manual clock adjustment procedure described on page
17.
4
AUTO
Remote control
●
ENTER
AUTO
●
There may be cases in which you can listen to radio broadcasts but
cannot use the ACCUCLOCK function.
If ACCUCLOCK cannot be used:
Repeat step 1. above to display “ACCUCLOCK Off” and turn off
ACCUCLOCK.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
3, 4
1
2, 5
Setting the clock manually
1
You may wish to set the clock manually if the ACCUCLOCK cannot
receive RDS signals, if the displayed time is obviously wrong, or if
you wish to set your own time (you may intentionally advance the
clock) by doing the following:
Remote control
ADJUST
1. Press the ADJUST button until “Manual Adjust” is displayed.
2. Press the ENTER button to display the day and time.
● If an RDS broadcast was tuned in and the CT information was
already received, the day and time will be displayed. To use the
currently set day and time, skip to step 5.
2
Remote control
ENTER
3. Press A or B button until the desired day of the week is
selected, and then press the ENTER button.
● The days can also be entered using the number buttons. If the
number buttons are used:
3
1: Sunday
5: Thursday 6: Friday
2: Monday
3: Tuesday
7: Saturday
4: Wednesday
Remote control
TIMER
4. Set the desired time by using the A or B button.
● The time can also be entered using the number buttons. For
example to enter “17:05”, press 1, then 7, then 0/10, and then 5.
5. Press the ENTER button.
Remote control
ENTER
TIMER
PRESET
The clock will start operating.
NOTE:
If ACCUCLOCK mode is turned on, even if the clock is set manually,
ACCUCLOCK will continue adjusting the clock automatically. Refer
to “If ACCUCLOCK cannot be used:” on the previous page to turn
off ACCUCLOCK.
4
Remote control
TIMER
TIMER
PRESET
Using the main unit to set the clock:
1. In stand-by mode, press the MEMORY button.
2. When the day flashes, use the PRESET/TUNING dial to set
the day.
3. Press the MEMORY button.
4. When “0:00” flashes, use the PRESET/TUNING dial to set the
time.
5. Press the MEMORY button.
5
Remote control
ENTER
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the timer (for remote control only)
The remote control can be used to set the following four timer func-
tions.
WeekDay: For listening to the radio at a designated time on weekdays.
WeekEnd: For listening to the radio at a designated time on weekends.
POWER
Once:
Sleep:
For listening to the radio at a designated time one time only.
Power off the system after a specified time period.
NOTE:
●
●
●
Make sure that the clock has been set correctly before setting the
timer.
Before setting the timer, be sure the amplifier’s volume control
and input selector are set to the desired positions.
In order to use the timer to switch on and off other components
(such as a CD player or cassette deck), connect the components to
this unit’s AC outlets.
MODE
ENTER
TIMER/
PRESET /
Refer to the Instruction Manuals of the other components for
more details on their operation.
Starting playing at a selected time
1
Before using the timer to listen to a radio broadcast, preset the station
frequency. (See “Receiving stations” on pages 10 and 11 for details on
how to preset FM/AM stations.)
Remote control
TIMER
W.DAY
MODE
1. Press the TIMER “MODE” button until “WeekDay”, “Week-
End” or “Once” is displayed.
At this time, “On” or “Off” flashes and the corresponding indicator
on the left side of the display lights up.
2. Press the A/B buttons to set “On”.
3. Press the ENTER button.
2
If “Once” was selected in step 1., skip to step 4.
If “WeekDay” or “WeekEnd” were selected in step 1., enter the
day settings.
Remote control
TIMER
The initial settings for “WeekDay” are Monday, Tuesday,
Wednesday, Thursday and Friday and the settings for “WeekEnd”
are Saturday and Sunday.
TIMER
PRESET
To leave the settings as they are:
Press the ENTER button.
To change the days:
1. After three seconds, the letter for Sunday begins flashing
2. Use the a/b buttons to either make the letter light up or go off.
3. Press the ENTER button to move to the next day.
When all the settings are entered, continue to step 4.
4. Press the a/b buttons to set the ON time, then press the
ENTER button.
3
TIMER
W.DAY
Remote control
ENTER
The initial ON time is 0:00. Enter your desired ON time.
TIMER
W.DAY
S
M
T
W
T
F
S
Sunday
Saturday
Monday
Friday
Tuesday Thursday
Wednesday
4
Remote control
TIMER
Remote control
ENTER
TIMER
PRESET
(Continued on page 19)
18
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Press the a/b buttons to set the OFF time, then press the
ENTER button.
After entering the ON time, the unit will suggest an OFF time of
one hour after the entered ON time.
6. Press the a/b buttons to set the preset station number, then
press the ENTER button.
5
Remote control
TIMER
Remote control
ENTER
TIMER
PRESET
7. Turn off the power.
When the ON time has come, the timer starts playing the preset
radio broadcast. When the OFF time has come, the timer automati-
cally turns off the unit’s power. If “WeekDay” or “WeekEnd”
were selected, the power is turned on and off at the set times on the
selected days. If “Once” was selected the power is turned on and
off at the set times, then the setting is cancelled.
Remote control
6
7
TIMER
Remote control
ENTER
TIMER
PRESET
NOTE:
If the same time is set for the ON and the OFF times, or the WeekDay
and WeekEnd day settings are all turned off, the timer cannot be set.
(The small timer indicator goes off.).
Remote control
MODE
W.DAY
Turning off the timer
TIMER
W.DAY
Repeat step 2. above to turn off the function.
The indicator at the left of the display goes off.
TIMER
W.DAY
Goes off
Setting the sleep function
When listening to a radio broadcast,
1. Press the TIMER “MODE” button until “Sleep Off” is dis-
played.
ANTENNA
A
TUNED STEREO
NARROW
AUTO
SLEEP SIGNAL STRENGTH
2. Press the ENTER button until the desired sleep time (90 to 10
in 10 minute) is set.
After the specified length of time, the power will be switched off
automatically.
ANTENNA
A
TUNED STEREO
NARROW
AUTO
To confirm the remaining time:
SLEEP SIGNAL STRENGTH
Press the ENTER button.
To cancel the sleep setting:
Press the ENTER button until the sleep setting is turned off (the sleep
time is not displayed).
Notes to timer setting
●
●
●
Make sure that the clock has been set correctly before setting the
time.
TIMER A
TIMER B
TIMER C
After setting the timer, be sure to set the power off. When the
power is on, the timer does not activate even at the ON time.
When the power is on with the timer, the other timers do no acti-
vate at the ON time. The power will be switched off at the first
timer’s OFF time. (See figure.)
If the SLEEP is set during timer play, the power will be switched
off at the sleep timer’s OFF time.
If more than two timer settings are made at the same time, the “W.
Day” setting has the first priority and the “W. End” setting has the
second one. “Once” setting has no priority.
Time
9:00 10:00 11:00 12:00
●
●
ON
OFF
ON
OFF
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Troubleshooting Guide
• No power.
FM
Cause:Power cord is disconnected.
Tuning Range:
European and Worldwide models:
87.50 – 108.00 MHz (50 kHz steps)
USA and Canadian models:
87.90 – 107.90 MHz (200 kHz steps)
Mono: 10.3 dBf 0.9 µV, 75 Ohms IHF
0.8 µV, 75 Ohms DIN
Stereo: 17.2 dBf 2.0 µV, 75 Ohms IHF
20 µV, 75 Ohms DIN
Remedy:Connect power cord.
• Buzzing noise on AM, usually conspicuous at night or with a weak station.
(FormodelsotherthanEuropeanmodels)
Cause:Noise from electrical apparatus such as fluorescent lamps.
Usable Sensitivity:
Remedy:Move set to different location.
Remedy:Change the position or direction of the loop antenna.
• High pitch noise.
Cause:Noise from TV.
Remedy:Keep unit away from TV set.
50 dB Quieting Sensitivity: Mono: 16.1 dBf 1.7 µV 75 Ohms
• Crackling noise on AM and FM.
Stereo: 36.1 dBf 17 µV 75 Ohms
1.3 dB
100 dB
100 dB
Mono: 85 dB IHF
Stereo: 77 dB IHF
Cause:Noise caused by turning a fluorescent lamp on and off.
Remedy:Move the autenna as far away as possible from the fluores-
cent lamp.
Cause:Noise from automobile ignition.
Remedy:Install an outdoor FM antenna as far away as possible from
the road.
Capture Ratio:
Image Rejection Ratio:
IF Rejection Ratio:
Signal-to-Noise Ratio:
70 dB IHF (Narrow)
70 dB DIN (±300 kHz, 40 kHz dev.)
• AM stations cannot be received. (For models other than European models)
Cause:AM loop antenna is not attached.
Selectivity:
AM Suppression Ratio:
Remedy:Connect the included AM loop antenna to the AM antenna
terminals.
50 dB
Total Harmonic Distortion: Mono: 0.1%
0.3% (Normal 40 kHz dev.)
Stereo: 0.2%
0.7% (Normal 40 kHz dev.)
• TUNED indicators and stereo indicator light but sound is distorted and
separation is bad.
Cause:Station is too strong.
Remedy:Change to T-shaped antenna.
Frequency Response:
Stereo Separation:
30 – 15,000 Hz (+0.5, –1.0 dB)
45 dB at 1 kHz
33 dB at 70 – 10,000 Hz
1.0 V
Cause:Multiple reflection of the radio waves because of tall buildings or
mountains.
Remedy:Use antenna which has better directivity and select a point
with the least distortion.
Output Voltage:
Muting Level:
• TUNED indicators and stereo indicator flicker and hiss is heard on FM.
Cause:Station is too weak.
17.2 dBf 2.0 µV, 75 Ohms
AM
Remedy:Install an outdoor FM antenna.
Remedy:Change the position or direction of the outdoor antenna.
Cause:Stereo FM broadcasts cover only about half the distance of an
ordinary broadcast.
Tuning Range:
USA and Canadian models:
530 – 1710 kHz (10 kHz steps)
Worldwide models:
531 – 1602 kHz (9 kHz steps)
530 – 1710 kHz (10 kHz steps)
25 µV
Remedy:Switch to mono reception. (Even stereo broadcasts will be
heard in mono.)
• No station or undesired station is recalled.
Usable Sensitivity:
Cause:The power cord has been unplugged for a long time.
Remedy:The memory contents are lost if the power is not turned on
and off a few times each month. Store all stations in the
memory again and remember to turn power on and off a few
times each month.
Image Rejection Ratio:
IF Rejection Ratio:
Signal-to-Noise Ratio:
Total Harmonic Distortion: 0.8%
Output Voltage:
40 dB
40 dB
40 dB
• The RDS function does not work.
250 mV
Cause:The station is not an RDS station.
Remedy:Receive an RDS station.
Cause:The reception station signal is too weak.
Remedy:Install an outdoor FM antenna.
Remedy:Change the position or direction of the outdoor antenna.
Cause:Too much interference.
General
Power Supply:
USA and Canadian models:
AC 120 V, 60 Hz
European models:
Remedy:Move the antenna as far away as possible from fluorescent
lamps.
Remedy:Install an outdoor FM antenna.
AC 230 V, 50 Hz
Worldwide models:
AC 120 V and 220 – 230 V
switchable, 60/50 Hz
• ACCUCLOCK function does not work.
Cause:The station is not an RDS station, or received signal is too weak.
Remedy:See the remedies for the RDS function problem above.
Cause:RDS broadcasts cannot be received.
Dimensions (W × H × D): 435 × 91 × 373 mm
17-1/8″ × 3-9/16″ × 14-11/16″
4.9 kg, 10.8 lbs.
Mass:
Specifications and features are subject to change without notice.
Remedy:Set and adjust according to instructions above.
• Excessive electrical interference may temporarily render this system’s sensi-
tive microcomputer inoperable. If this happens, unplug the system for at least
five seconds.
Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572, JAPAN
ONKYO U.S.A. CORPORATION
18 Park Way, Upper Saddle River, N.J. 07458, U.S.A.
ONKYO EUROPE ELECTRONICS GmbH
Liegnitzerstrasse 6, 82194 Groebenzell, GERMANY
ONKYO CHINA LIMITED
Units 2102-2107, Metroplaza Tower I, 223 Hing Fung Road, Kwai Chung,
HOMEPAGE
SN 29342325A
E
Printed in Japan
Download from Www.Somanuals.com. All Manuals Search And Download.
|