Contents
DVD Changer
Overview ..............................................2
DV-CP704
Connections ......................................17
Getting Started and Setting up ........22
Basic Playback ..................................23
Instruction Manual
Thank you for purchasing an Onkyo DV-CP704
DVD Changer. Read this manual carefully
before using your new DVD Changer. A good
understanding of its features and operation will
allow you to achieve optimum performance and
enjoyment.
Playback Techniques ........................34
Detailed Settings...............................42
Keep this manual for future reference.
Miscellaneous information...............49
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
1. Recording Copyright—Unless it’s for personal use
only, recording copyrighted material is illegal with-
out the permission of the copyright holder.
• Install this unit horizontally. Never use it on its
side or on a sloping surface, because it may cause
a malfunction.
• If you install this unit near a TV, radio, or VCR,
the picture and sound quality may be affected. If
this occurs, move this unit away from the TV,
radio, or VCR.
2. AC Fuse—The AC fuse inside the unit is not user-
serviceable. If you cannot turn on the unit, contact
your Onkyo dealer.
3. Care—Occasionally you should dust the unit all
over with a soft cloth. For stubborn stains, use a soft
cloth dampened with a weak solution of mild deter-
gent and water. Dry the unit immediately afterwards
with a clean cloth. Don’t use abrasive cloths, thin-
ners, alcohol, or other chemical solvents, because
they may damage the finish or remove the panel let-
tering.
8. To Obtain a Clear Picture—This unit is a high-
tech, precision device. If the lens on the optical
pickup, or the disc drive mechanism becomes dirty
or worn, the picture quality may be affected. To
maintain the best picture quality, we recommend
regular inspection and maintenance (cleaning or
worn part replacement) every 1,000 hours of use
depending on the operating environment. Contact
your Onkyo dealer for details.
4. Power
WARNING
9. Moisture Condensation
BEFORE PLUGGING IN THE UNIT FOR THE
FIRST TIME, READ THE FOLLOWING SEC-
TION CAREFULLY.
Moisture condensation may damage this unit.
Read the following carefully:
AC outlet voltages vary from country to country.
Make sure that the voltage in your area meets the
voltage requirements printed on the unit’s rear panel
(e.g., AC 230 V, 50 Hz or AC 120 V, 60 Hz).
Moisture may condense on the lens of the optical
pickup, one of the most important parts inside this
unit.
• Moisture condensation can occur in the following
situations:
The power cord plug is used to disconnect this unit
from the AC power source. Make sure that the plug
is readily operable (easily accessible) at all times.
– The unit is moved from a cold place to a warm
place.
– A heater is turned on, or cold air from an air
conditioner is hitting the unit.
5. Never Touch this Unit with Wet Hands—Never
handle this unit or its power cord while your hands
are wet or damp. If water or any other liquid gets
inside this unit, have it checked by your Onkyo
dealer.
– In the summer, when this unit is moved from an
air conditioned room to a hot and humid place.
– The unit is used in a humid place.
• Do not use this unit when there’s the possibility
of moisture condensation occurring. Doing so
may damage your discs and certain parts inside
this unit.
If condensation does occur, remove all discs and
leave this unit turned on for two to three hours. By
this time, the unit will have warmed up and any con-
densation will have evaporated.
6. Handling Notes
• If you need to transport this unit, use the original
packaging to pack it how it was when you origi-
nally bought it.
• Do not leave rubber or plastic items on this unit
for a long time, because they may leave marks on
the case.
• This unit’s top and rear panels may get warm
after prolonged use. This is normal.
• If you do not use this unit for a long time, it may
not work properly the next time you turn it on, so
be sure to use it occasionally.
10. Region Numbers—The DVD standard uses region
numbers to control how discs can be played around
the world, the world being divided into six regions.
This unit will only play DVD discs that match its
region number, which can be found on its rear panel
• When you’ve finished using this unit, remove all
discs and turn off the power.
ALL
1
,
(e.g.,
).
11. About this Manual—This manual explains how to
use all of this unit’s functions. Although the DVD
standard offers many special features, not all discs
use them all, so depending on the disc being played,
this unit may not respond to certain functions. See
the disc’s sleeve notes for supported features.
7. Installing this Unit
• Install this unit in a well-ventilated location.
• Ensure that there’s adequate ventilation all
around this unit, especially if it’s installed in an
audio rack. If the ventilation is inadequate, the
unit may overheat, leading to malfunction.
• Do not expose this unit to direct sunlight or heat
sources, because its internal temperature may
rise, shortening the life of the optical pickup.
• Avoid damp and dusty places, and places subject
to vibrations from loudspeakers. Never put the
unit on top of, or directly above a loudspeaker.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions—Continued
This unit contains a semiconductor laser system and is
classified as a “CLASS 1 LASER PRODUCT”. So, to
use this model properly, read this Instruction Manual
carefully. In case of any trouble, please contact the store
where you purchased the unit.
For Canadian Models
NOTE: THIS CLASS B DIGITAL APPARATUS
COMPLIES WITH CANADIAN ICES-003.
For models having a power cord with a polarized plug:
CAUTION: TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG TO WIDE SLOT,
FULLY INSERT.
To prevent being exposed to the laser beam, do not try
to open the enclosure.
CAUTION:
CLASS 1M VISIBLE AND INVISIBLE LASER
RADIATION WHEN OPEN. DO NOT VIEW
DIRECTLY WITH OPTICAL INSTRUMENTS.
Modèle pour les Canadien
REMARQUE: CET APPAREIL NUMÉRIQUE DE
LA CLASSE B EST CONFORME À LA NORME
NMB-003 DU CANADA.
Sur les modèles dont la fiche est polarisée:
ATTENTION: POUR ÉVITER LES CHOCS ÉLEC-
TRIQUES, INTRODUIRE LA LAME LA PLUS
LARGE DE LA FICHE DANS LA BORNE CORRE-
SPONDANTE DE LA PRISE ET POUSSER
JUSQU’AU FOND.
THIS PRODUCT UTILIZES A LASER. USE OF
CONTROLS OR ADJUSTMENTS OR PERFOR-
MANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARD-
OUS RADIATION EXPOSURE.
The label on the right is
applied on the rear panel.
1. This unit is a CLASS 1
LASER PRODUCT and
employs a laser inside the cabinet.
2. To prevent the laser from being exposed, do not remove the
cover. Refer servicing to qualified personnel.
For U.S. models
FCC Information for User
CAUTION:
The user changes or modifications not expressly
approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interfer-
ence in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accor-
dance with the instructions, may cause harmful interfer-
ence to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful inter-
ference to radio or television reception, which can be
determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by
one or more of the following measures:
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
•
•
Connect the equipment into an outlet on a circuit dif-
ferent from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV tech-
nician for help.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Installing the Remote Controller’s
Batteries.................................................16
Connecting a Component with an HDMI
Input.......................................................20
Powering Up & Setting Up the
Selecting Titles, Chapters & Tracks by
Number..................................................28
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
• DVD-R/RW, DVD+R/RW (DVD-Video, MP3/WMA/
JPEG)
Supplied Accessories
Make sure you have the following accessories:
• Direct digital path for signal purity
• Vector Linear Shaping Circuitry
*4
Video
• Advanced 108 MHz/14-bit video D/A converter
*5
• HDMI digital interface
• Component video output
Remote controller (RC-655DV) & 2 batteries (AA/R6)
• S-Video and composite video outputs
• Title, chapter, track, or time search
• Last Memory function allows you to resume playback
from a specific point on a DVD-Video disc, even if
that disc has been removed from the DV-CP704
• Supports 4:3 and 16:9 aspect ratio TVs
• Multiple camera angle support
• Parental Lock function
• Screen Saver function
AV connecting cable (RCA/phono) (1.5 m)
Audio
• Audiophile-class performance
• Dynamic Range Control setting
• 192 kHz/24-bit D/A converter
• Coaxial digital output
• Optical digital output
• Analog output
cable (0.8 m)
This cable is used to connect the DV-CP704 to other
-compatible Onkyo components for
Interactive) control.
(Remote
To use
, in addition to an
connection, you must
make an analog audio connection (RCA) between the
DV-CP704 and your Onkyo AV receiver.
Others
• Load discs without stopping playback
• Adjustable display brightness
• Slow motion playback
• Fast forward and reverse
• Repeat playback options include: Chapter, Title, 1
Disc, All Discs, Track, and Folder (MP3/WMA)
• Random playback options include: Title, 1 Disc, All
Discs, and Folder (MP3/WMA)
• Supports up to 8 soundtracks/languages
• Supports up to 32 subtitle languages
Coaxial digital cable (1.0 m)
In catalogs and on packaging, the letter at the end of the product
name indicates the color. Specifications and operation are the
same regardless of color.
DV-CP704 Features
*1. Manufactured under license from Dolby Laboratories. “Dolby”
and the double-D symbol are trademarks of Dolby Laborato-
ries.
*2. “DTS” and “DTS Digital Out” are trademarks of DTS, Inc.
*3. Windows Media, and the Win-
dows logo are trademarks, or
Highlights
*1
*2
• Dolby Digital and DTS Digital Out
• Holds up to six discs
• Chain mode for successive disc playback
• Party mode plays discs in random order
• DVD-Video playback
• Audio CD playback
• MP3/WMA playback
registered trademarks of
Microsoft Corporation in the
United States and/or other coun-
tries.
*3
*4. VLSC and the VLSC logo are registered trademarks of Onkyo
Corporation.
*5. HDMI, the HDMI logo and High-Definition Multimedia Inter-
face are trademarks or registered trademarks of HDMI licens-
ing LLC.
• JPEG picture display and slideshow
• CD-R, CD-RW (Audio CD, MP3/WMA/JPEG)
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction—Continued
• Don’t use discs that have residue from adhesive tape,
rental discs with peeling labels, or discs with custom-
made labels or stickers. Doing so may damage the
DV-CP704 and you may not be able to remove the
disc properly.
Disc Notes
Supported Discs
The DV-CP704 supports the following discs.
Disc
Logo
Format or file type
About playing copy-controlled CDs
Some copy-controlled CDs may not conform to official
CD standards. They are special discs and may not play
on the DV-CP704.
*1
DVD-Video
DVD-Video, MP3,
WMA, JPEG
*2
DVD-R
DVD Region Numbers
The North American DV-CP704 supports only
Region 1 DVD-Video discs bearing this logo.
DVD-Video, MP3,
WMA, JPEG
1
*2
DVD-RW
TheAustralian DV-CP704 supports only Region
4 DVD-Video discs bearing this logo.
4
*3
PCM
Audio CD
If you attempt to play a disc intended for another region,
a message saying that the disc cannot be played appears.
Audio CD, MP3, WMA,
JPEG
*2
CD-R
Function Support
Audio CD, MP3, WMA,
JPEG
*2
The following icons are used throughout this manual to
indicate which functions can be used with the various
disc formats and file types.
CD-RW
JPEG CD
JPEG
Icon
Disc format or file type
– DVD+R/RW –
The DV-CP704 supports DVD+R/RW discs recorded
in the following formats:
DVD
DVD-Video
• Discs recorded in DVD-Video mode.
• Discs recorded in ISO 9660 Level 2 or Joliet for-
mat containing MP3, WMA, or JPEG files.
CD
Audio CD
MP3 file
MP3
WMA
JPEG
*1 The North American model will only play Region 1 NTSC
DVD-Video discs. TheAustralian model will only play Region
4 PAL DVD-Video discs, although it can be set to AUTO, in
which case it will also play Region 4 NTSC DVD-Video discs.
*2 MP3, WMA, and JPEG files are supported on discs recorded in
ISO 9660 Level 2 or Joliet format. (See “MP3/WMA/JPEG
CD-R, CD-RW, DVD-R, and DVD-RW discs may not work
properly for any of the following reasons: incomplete disc
finalization, disc burner characteristics, disc characteristics, the
disc is damaged or dirty, the total size of the data is too small.
See the manual supplied with your disc burner for more infor-
mation. Condensation or dirt on the optical pickup lens can also
affect playback.
WMA file
JPEG file
About this Manual
This manual explains how to use all of the DVD player’s
functions. Although the DVD standard offers many spe-
cial features, not all discs use them all, so depending on
the disc being played, the DVD player may not respond
to certain functions. See your disc’s sleeve notes for sup-
ported features.
*3 Some audio CDs feature copy protection that doesn’t conform
to the official CD standard. Since these are nonstandard discs,
they may not play properly in the DV-CP704.
When you attempt to use a DVD feature that is
not available, this logo may appear onscreen,
indicating that the feature is not supported by
the current disc or by the DVD player.
• The DV-CP704 does not support disc types not listed.
• The DV-CP704 supports 8 cm and 12 cm discs.
• Don’t use discs with an unusual shape, such as those
shown below, because you may damage the
DV-CP704.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction—Continued
Disc Content Organization
MP3/WMA/JPEG Compatibility
• The DV-CP704 can play/display MP3, WMA, and
JPEG files recorded on CD-R, CD-RW, DVD-R,
DVD-RW, DVD+R and DVD+RW discs.
• Discs must be in ISO 9660 Level 2 or Joliet format
(folders can be up to eight levels deep). Music files
recorded on discs that use the HFS (hierarchical file
system) cannot be played.
■ DVD-Video Format
DVD-Video discs contain titles, which are usually subdi-
vided into chapters.
Title 1
Chapter 1 Chapter 2
Title 2
Chapter 1 Chapter 2
• Discs must be finalized.
• The DV-CP704 can only recognize the first session on
multisession discs.
DVD-Video
• You can determine the order in which the DV-CP704
plays/displays your MP3/WMA songs and JPEG pic-
tures by prefixing file and folder names with a three-
digit number. For example 001.Root, 002.Folder, and
so on, and 001.Track.mp3, 002.Track.mp3, and so on.
• Only the first eight characters of folder and track names
(excluding the filename extension) are displayed.
• The folder numbered “001” appears as “ROOT” in the
Disc Navigator.
■ Audio CD Format
Audio CDs contain tracks.
Track 1
Track 2
Track 3
Track 4
Track 5
Audio CD
• The DV-CP704 supports up to 255 folders and up to
255 files per folder.
• If you try to play an incompatible file, the message
“This format cannot be played” appears on the display.
■ MP3/WMA Files
MP3 andWMA files are typically organized into folders.
The DV-CP704 handles MP3 and WMA files as tracks.
■ MP3
Folder 1
Folder 2
• MP3 files must be MPEG1Audio Layer 3 format, 44.1
or 48 kHz, fixed bit-rate.
Track 1 Track 2
Track 3
Track 1 Track 2
• MP3 files must have a “.mp3” or “.MP3” filename
extension.
• Variable bit-rates (VBR) from 64 kbps to 320 kbps are
supported. (Playing times may display incorrectly
with VBR.)
MP3/WMA
(CD-R/CD-RW/DVD-R/DVD-RW/
DVD+R/DVD+RW)
■ JPEG Files
■ WMA
JPEG picture files are typically organized into folders.
The DV-CP704 handles JPEG files as tracks.
• WMA files must have the copyright option turned off.
• Sampling rates 44.1/48 kHz are supported.
• Variable bit-rates (VBR) from 48 kbps to 192 kbps are
supported. (Playing times may display incorrectly
with VBR.)
Folder 1
Folder 2
Track 1 Track 2
Track 3
Track 1 Track 2
• WMA files must have a “.wma” or “.WMA” filename
extension.
JPEG
■ JPEG
(CD-R/CD-RW/DVD-R/DVD-RW/
DVD+R/DVD+RW)
• JPEG files must have a “.jpg” or “.JPG” filename
extension.
• JPEG files must be less than 5 megabytes in size.
About WMA
WMA is an acronym for Windows Media Audio and
refers to an audio compression technology developed by
Microsoft Corporation. WMA content can be encoded
®
by using Windows Media Player version 7, 7.1 or 8.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction—Continued
Handling Discs
Copyright
• Never touch the underside of a disc.Always hold discs
by the edge, as shown.
It is forbidden by law to copy, broadcast, show, broadcast
on cable, play in public, or rent copyrighted material
without permission.
DVD-Video discs are copy-protected, and any record-
ings made from these discs will be distorted.
This product incorporates copyright protection technol-
ogy that is protected by method claims of certain U.S.
patents and other intellectual property rights owned by
Macrovision Corporation and other rights owners. Use
of this copyright-protection technology must be autho-
rized by Macrovision Corporation, and is intended for
home and other limited viewing uses only, unless other-
wise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
Underside
• Never attach adhesive tape or sticky labels to discs.
Cleaning Discs
• For best results, keep your discs clean. Fingerprints
and dust can affect the sound and picture quality and
should be removed as follows. Using a clean soft
cloth, wipe from the center outwards, as shown. Never
wipe in a circular direction.
✔
• To remove stubborn dust or dirt, wipe the disc with a
damp soft cloth, and then dry it with a dry cloth.
• Never use solvent-based cleaning fluids, such as thin-
ner or benzine, commercially available cleaners, or
antistatic sprays intended for vinyl records, because
they may damage the disc.
Storing Discs
• Don’t store discs in places subject to direct sunlight, or
near heat sources.
• Don’t store discs in places subject to moisture or dust,
such as in a bathroom or near a humidifier.
• Always store discs in their cases and vertically. Stack-
ing, or putting objects on unprotected discs may cause
warping, scratches, or other damage.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction—Continued
■ HDMI (High Definition Multimedia Interface):
A new connection format that greatly simplifies AV
connections by carrying uncompressed SD or HD
digital video and digital audio all in one cable.
DV-CP704-related Terminology
■ CD-R (compact disc recordable): A type of
CD that can be recorded only once. Can be used to
make audio CDs, or MP3/WMA/JPEG discs.
■ Interlaced scanning: TV pictures are made by
scanning the screen in horizontal lines from top to
bottom. With Interlaced scanning, two scans (fields)
are used to make each picture (frame). Contrast with
Progressive scanning.
■ CD-RW (compact disc rewritable): A type of
CD that can be recorded many times. Can be used to
make audio CDs, MP3/WMA/JPEG discs.
■ Chapter: Titles on DVD-Video discs can be subdi-
vided into chapters.
■ JPEG (Joint Photographic Experts Group):
The compressed file format used to store digital pho-
tos.
■ Component video: A video connection format
that separates the luminance (Y) and color difference
signals (PR, PB), providing better picture quality than
S-Video.
■ LFE (low-frequency effects): The surround-
sound channel used for low-frequency effects.
■ Composite video: A video connection format that
■ Linear PCM: The uncompressed digital audio for-
mat used for audio CDs. PCM stands for Pulse Code
modulation.
mixes the luminance and color signals together.
■ Dolby Digital: The multi-channel digital surround
sound format used on most DVD-Videos.
■ MP3 (MPEG 1 Audio Layer 3): Popular com-
pressed file format for storing digital music.
■ Downmixing: The process of mixing multiple
audio channels into fewer channels. For example, a
5.1-channel surround mix can be downmixed into
two channels for reproduction on stereo systems.
■ MPEG1 (Moving Picture Experts Group 1):
The compressed digital video format used for Video
CDs.
■ Downsampling: The process of reducing the sam-
■ MPEG2 (Moving Picture Experts Group 2):
The compressed digital video format used for
DVD-Videos, offering better picture quality than
MPEG1.
pling rate of digital audio.
■ DTS (Digital Theater System): The 5.1-channel
surround format that uses less compression for faith-
ful reproduction.
■ NTSC: The color TV system used in the United
States, Japan, Taiwan, and Korea.
■ DVD-R (DVD recordable): A type of DVD disc
that can be recorded only once. Can be used to make
DVD-Video discs or to store computer data.
■ PAL: The color TV system used in most of Europe,
the United Kingdom, Australia, Brazil, and China.
■ DVD-RW (DVD rewritable): A type of DVD disc
that can be recorded many times. Can be used to
make DVD-Video discs or to store computer data.
■ Progressive scanning: TV pictures are made by
scanning the screen in horizontal lines from top to
bottom. With progressive scanning, each picture
(frame) is made by scanning the entire screen in one
go, resulting is a clearer and stabler picture. Contrast
with Interlaced scanning.
■ DVD-Video: The format for storing movies on
DVD, with interactive menus, multiple language
soundtracks, subtitles, camera angles, and so on.
■ S-Video: A video connection format that separates
the luminance (Y) and color (C) signals, providing
better picture quality than composite video.
■ Field: In interlaced scanning, a field is a single scan
of the screen. There are two fields per frame.
■ Frame: An individual TV picture is called a frame.
With the NTSC color system there are 30 frames per
second.
■ Title: Movies on DVD-Video are called titles.
■ WMA (Windows Media Audio): A compressed
file format for storing digital music.
■ HD: Abbreviation for high definition, as in
HDTV(high-definition TV).
■ HDCP (High-bandwidth Digital Content
Protection): The video encryption technology
developed by Intel for HDMI/DVI. It’s designed to
protect video content and requires a HDCP-compati-
ble device to display the encrypted video.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls & Connectors
Front Panel
A
B
C
D
E
F
G
J
L
M
N O P Q R S
H I
K
The page numbers in parentheses show where you can find the main explanation for each item.
This button is used to set the DV-CP704 to On or
Standby.
This button is used with the Repeat function.
L Display
Don’t turn on the power until you’ve completed,
and double checked all connections (page 22).
This sensor receives control signals from the remote
controller.
This indicator lights up when the DV-CP704 is in
Standby mode.
N Previous [
This button is used to select the previous chapter or
track. During playback it selects the beginning of
the current track.
The disc tray has six bays for loading up to six
discs.
D Disc tray light
O Next [
This button is used to select the next chapter or
track.
This light illuminates the disc tray. It comes on
when the DV-CP704 is turned on, and is brighter
while the disc tray is open.
This button is used with the Party mode function.
This button is used to select the disc bays (i.e.,
rotate the disc tray) when loading or removing
discs, and to select discs for playback.
This button is used to pause playback.
This button is used to stop playback and to cancel
Party mode.
These buttons are used to select discs. Playback
starts automatically when a disc is selected with
these buttons.
This button is used to start playback and to cancel
fast forward and fast reverse.
This button is used to open and close the disc tray.
This button is used with the Random function.
This button is used to adjust the display brightness
and turn the disc tray light on or off.
This button is used to display information about the
current disc, title, chapter, or track, including the
elapsed time, remaining time, total time, and so on.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls & Connectors—Continued
Display
1
2
3
4 5 6 7 8 9 0 A B
C
CHAIN MODE DISC
ALL
DVD
TITLE
CHP TRACK
PRGV LAST
TOTAL REMAIN
1
4
2
5
3
6
CD
CDVD
D
E
F
The page numbers in parentheses show where you can find the main explanation for each item.
1 CHAIN MODE, ALL, DVD & CD indicators
9 REMAIN indicator
This indicator appears while the remaining time is
being displayed.
The CHAIN MODE indicator appears when the
Chain mode function is on. The ALL, DVD, and CD
indicators show the type or Chain mode selected.
When Party mode is selected, the CHAIN MODE
and CD indicators appear.
0 Camera angle
This indicator appears if the DVD-Video disc being
played features multiple camera angles.
2 DISC indicator
This indicator is shown during playback.
The number of the currently selected disc appears
here.
This indicator appears when playback is paused.
3 TITLE indicator
While stopped, the total number of titles on the cur-
rent DVD-Video disc is displayed here. During
playback, the number of the current title is dis-
played.
These indicators show how many discs are loaded.
The number of the current disc has a circle around
it.
When the disc tray is closed, all of the disc indica-
tors appear until the DV-CP704 has checked each
bay for the presence of a disc. If a bay is found to
have no disc, the corresponding indicator disap-
pears.
4 CHP indicator
This indicator appears while the number of the cur-
rent chapter is being displayed.
5 TRACK indicator
This indicator appears while track numbers are
being displayed. While stopped, the total number of
tracks on the current audio CD, or MP3/WMA disc
are displayed. During playback, the number of the
current track is displayed.
D Chapter & track number
Chapter and track numbers appears here.
E Time display
Time information, such as total time, remaining
time, and so on, is displayed here in hours, minutes,
and seconds. Other messages are also displayed.
6 PRGV indicator
This indicator appears when the Progressive Scan-
ning function is on.
F CDVD indicator
This indicator shows the type of disc currently
selected:
DVD: DVD-Video, DVD-R, DVD-RW, DVD+R, or
This indicator appears when the Last Memory func-
tion has been set.
DVD+RW
8 TOTAL indicator
CD: Audio CD, MP3/WMA/JPEG CD-R, or
This indicator appears while the total time is being
displayed.
CD-RW
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls & Connectors—Continued
Rear Panel
1
9
2
3 4
5
6
7 8
The page numbers in parentheses show where you can find the main explanation for each item.
A
REMOTE CONTROL
These (Remote Interactive) connectors can be
connected to the
connectors on your other
Onkyo AV components for interactive control.
B ANALOG AUDIO OUTPUT
These RCA/phono connectors can be connected to
analog audio inputs on a hi-fi amp, or AV receiver.
C COAXIAL AUDIO OUTPUT
This coaxial digital audio output can be connected
to a coaxial digital audio input on a hi-fi amp, AV
receiver, or surround sound decoder (Dolby Digital,
DTS).
D OPTICAL AUDIO OUTPUT
This optical digital audio output can be connected to
an optical digital audio input on a hi-fi amp, AV
receiver, or surround sound decoder (Dolby Digital,
DTS).
E HDMI OUT
This HDMI jack outputs digital video and audio and
can be connected to an HDMI input on a compatible
TV or other component.
F COMPONENT VIDEO OUTPUT
These RCA/phono connectors can be used to con-
nect a TV or projector with component video inputs.
G S VIDEO OUTPUT
This connector can be used to connect a TV or pro-
jector with an S-Video input.
H VIDEO OUTPUT
This RCA/phono connector can be used to connect
a TV or projector with a composite video input.
I Power cord
This power cord should be connected to a suitable
wall outlet.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls & Connectors—Continued
Remote Controller
The page numbers in parentheses show where you can
find the main explanation for each item.
This button is used to turn on the DV-CP704.
Don’t turn on the DV-CP704 until you’ve com-
pleted, and double checked all connections
P
1
2
Q
R
S
T
U
This button is used to set the DV-CP704 to Standby.
These buttons are used to enter title, chapter, and
track numbers and to enter times for locating spe-
cific points in time.
3
To enter a single-digit number, simply press the cor-
responding button. To enter a double-digit number,
enter the numbers in order from left-to-right (e.g., to
enter 14, press [1] then [4].
The [+10] button is used to enter multiples of ten
(i.e., 10, 20, 30, and so on). For example, to enter
the number 25, press the [+10] button twice fol-
lowed by the [5] button.
V
Z
W
X
Y
4
5
6
7
a
b
c
8
9
J
This button is used to select foreign language
soundtracks and audio formats (e.g., Dolby Digital
or DTS).
This button is used to select subtitles.
K
d
This button is used with the Random Playback func-
tion.
e
L
These buttons are used for slow motion playback.
H Previous [
f
g
M
N
O
This button is used to select the previous chapter or
track. During playback it selects the beginning of
the current track.
This button is used to start playback.
This button is used to start fast reverse.
These buttons are used to navigate DVD-Video
menus and the onscreen setup menus.
This button is used to select the top menu.
This button is used to select the menu.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls & Connectors—Continued
This button is used to change the view mode. Press-
ing and holding it for a few seconds selects Zoom
mode.
This button is used to exit the onscreen setup
menus.
This button is used with the Chain mode function.
This button is used to set the video resolution of the
HDMI OUT, and to turn the HDMI OUT on or off.
This button is used to open and close the disc tray.
This button is used to select the disc bays (i.e.,
rotate the disc tray) when loading or removing
discs, and to select discs for playback.
This button is used to search for titles, chapters,
tracks, and specific points in time.
This button is used with the Memory Playback
function.
This button is used to set the Repeat Playback func-
tions.
This button is used to set the A–B Repeat Playback
function.
This button is used to cancel various functions.
This button is used to display information about the
current disc, title, chapter, or track, including the
elapsed time, remaining time, total time, and so on.
This button is used to select different camera angles.
This button is used with the Last Memory function.
This button is used to pause playback. For DVDs,
pressing this button while playback is paused moves
the video forward one frame at a time.
a Next [
This button is used to select the next chapter or
track.
This button is used to stop playback.
This button is used to start fast forward.
This button is used to start playback of the selected
title chapter, or track and to confirm settings.
This button is used to open and close the onscreen
setup menus.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Using the DV-CP704
Installing the Remote Controller’s
Batteries
Using the Remote Controller
To use the remote controller, point it at the DV-CP704’s
remote control sensor, as shown below.
Open the battery compartment, as
shown.
1
Remote control sensor
DV-CP704
30˚
30˚
Insert the two supplied batteries (AA/
R6) in accordance with the polarity dia-
gram inside the battery compartment.
2
Notes:
• The remote controller may not work reliably if the
DV-CP704 is subjected to bright light, such as direct
sunlight or inverter-type fluorescent lights. Keep this
in mind when installing the DV-CP704.
• If another remote controller of the same type is used in
the same room, or the DV-CP704 is installed close to
equipment that uses infrared rays, the remote control-
ler may not work reliably.
Close the battery compartment.
3
• Don’t put anything, such as a book, on the remote con-
troller, because the buttons may be pressed inadvert-
ently, thereby draining the batteries.
• The remote controller may not work reliably if the
DV-CP704 is installed in a rack behind colored glass
doors. Keep this in mind when installing the
DV-CP704.
• The remote controller will not work if there’s an obsta-
cle between it and the DV-CP704’s remote control
sensor.
Notes:
• If the remote controller doesn’t work reliably, try
replacing both batteries.
• Don’t mix new and old batteries, or different types of
batteries.
• If you intend not to use the remote controller for a long
time, remove the batteries to prevent possible leakage
and corrosion.
• Flat batteries should be removed as soon as possible to
prevent possible leakage and corrosion.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the DV-CP704
This chapter explains how to connect the DV-CP704 to
your other AV components.
RCA/phono AV Connection Color Coding
RCA/phono AV connections are usually color coded:
red, white, and yellow. Use red plugs to connect right-
channel audio inputs and outputs (typically labeled “R”).
Use white plugs to connect left-channel audio inputs and
outputs (typically labeled “L”). And use yellow plugs to
connect composite video inputs and outputs.
Before Making Any Connections
• Read the manuals supplied with your AV components.
• Don’t connect the power cord until you’ve completed
all audio and video connections.
Analog audio
Right (red)
Left (white)
Right (red)
Left (white)
Optical Digital Jack
The DV-CP704’s optical digital jack has shutter-type
cover that open when an optical plug is inserted and
close when it’s removed. Push plugs in all the way.
Composite video
(Yellow)
(Yellow)
• Push the plugs in all the way
to make a good connection.
• To prevent interference, keep
audio and video cables away
from power cords and speaker
cables.
Caution: To prevent shutter damage, hold the optical
plug straight when inserting and removing.
Right!
Wrong!
AV Cables & Connectors
Video
HDMI connections can carry uncom-
pressed, standard or high definition digital
video and digital audio, for the best picture
and sound quality.
HDMI
Component video separates the luminance
(Y) and color difference signals (PR, PB),
providing the best picture quality. (Some
TV manufacturers label their component
video inputs slightly differently.)
Y
Y
Component
video
/
/
P
B
C
B
P
B
C
B
P
R
/CR
PR
/ CR
S-Video provides better picture quality
than composite video.
S-Video
Composite video can be found on virtually
all TVs,VCRs, and other video equipment.
Use only dedicated composite video
cables.
Composite
video
Audio
Optical digital audio connections with the
optical digital audio output and a suitable
AV receiver, you can enjoy DVD-Videos
with surround sound.
Optical digital
Coaxial digital
Analog
Coaxial digital audio connections with the
coaxial digital audio output and a suitable
AV receiver, you can enjoy DVD-Videos
with surround sound.
RCA/phono analog audio connectors can
be found on virtually all AV components.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the DV-CP704—Continued
ConnectingYour TV or Projector
This section explains how to connect the DV-CP704 to
your TV or projector.
composite video cable to connect the DV-CP704’s
VIDEO OUTPUT to a composite video input on your TV.
In this hookup example, theTV handles the audio and video.
To enjoy Dolby Digital or DTS (5.1-channel surround),
The DV-CP704 has three types of video output: compo-
nent video, S-Video, and composite video. Component
video offers the best picture quality, so if your TV supports
it, use a commercially available component video cable to
connect the DV-CP704’s COMPONENT VIDEO OUT-
PUT to the component video inputs on your TV. If your
TV supports progressive scanning, you must use compo-
nent video in order to take advantage of that feature.
S-Video offers better picture quality than composite
video, so if your TV supports it, use the S-Video cable to
connect the DV-CP704’s S VIDEO OUTPUT to an
S-Video input on your TV. Failing that, use the supplied
Compatibility of this unit with progressive-scan TVs.
This player is compatible with progressive video Macro
Vision System Copy Guard.
CONSUMERS SHOULD NOTE THAT NOT ALL
HIGH DEFINITION TELEVISION SETSARE FULLY
COMPATIBLE WITH THIS PRODUCT AND MAY
CAUSE ARTIFACTS TO BE DISPLAYED IN THE
PICTURE. IN CASE OF 525 OR 625 PROGRESSIVE
SCAN PICTURE PROBLEMS, IT IS RECOM-
MENDED THAT THE USER SWITCH THE CON-
NECTION TO THE “STANDARD DEFINITION”
OUTPUT. IF THERE ARE QUESTIONS REGARD-
ING OUR TV SET COMPATIBILITY WITH THIS
MODEL 525p AND 625p DVD PLAYER, PLEASE
CONTACT OUR CUSTOMER SERVICE CENTER.
(red)
Component
video cable
S-Video cable
(white)
(yellow)
Only one connection
S VIDEO IN
required! Choose
component video,
S-Video, or
AV RCA/phono
cable (supplied)
IN
Y
composite video.
(red)
PB
TV or projector
PR
(white)
(yellow)
VIDEO IN
L
R
ANALOG
INPUT
Notes:
• Before making any connections, turn off the
DV-CP704 and your TV and disconnect their power
cords from the wall outlets.
• Also refer to the connection information supplied with
your TV.
• Connect the DV-CP704’s video outputs directly to
your TV. Don’t connect a VCR or other video equip-
ment in between your DV-CP704 and TV. Doing so
may result in picture distortion, because of the copy
protection system used on DVD-Video discs.
• When you use the analog audio outputs, don’t play
DTS CDs or don’t select DTS soundtracks on
DVD-Video discs. Doing so will produce unpleasant
digital noise, which may damage your equipment.
• If you connect a TV that does not support progressive
scanning to the component video output, change the
HDMI Output Setting to Off (see page 44).
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the DV-CP704—Continued
Notes:
Connecting an AV receiver
• Make sure that the Digital/HDMI Audio Out setting
wise, you won’t get surround sound.
• Also refer to the connection information supplied with
your AV receiver or decoder.
To enjoy Dolby Digital or DTS surround sound, you
need to connect one of the DV-CP704 digital audio out-
puts to the digital input on a Dolby Digital or DTS
decoder or an AV receiver with built-in decoders.
• When playing Dolby Digital or DTS source material,
be sure to select Dolby Digital or DTS decoding,
respectively, on your AV receiver or decoder. See the
relevant manuals.
• You can experience Dolby Digital only with DVDs
that bear the Dolby Digital logo. Likewise, you can
experience DTS only with DVDs or CDs that bear the
DTS logo.
Analog Connection
Use an RCA/phono audio cable to connect the
DV-CP704’s ANALOG AUDIO OUTPUTs to a pair of
analog audio inputs on your AV receiver, as shown.
Signal flow
L
R
ANALOG
INPUT
(white)
(white)
(red)
Connecting a Stereo Amp
This section explains how to connect the DV-CP704 to a
stereo amp for better sound quality than that of most
TVs. This is ideal for playing your audio CDs and MP3/
WMA discs in the DV-CP704. DVD-Video discs will
sound better too.
RCA/phono cable
(red)
L
Analog Connection
AUDIO
OUTPUT
ANALOG
Use an RCA/phono audio cable to connect the
DV-CP704’s ANALOG AUDIO OUTPUTs to a pair of
analog audio inputs on your stereo amp, as shown.
R
Signal flow
Digital Connection
L
Use an optical (or coaxial) digital audio cable to connect
the DV-CP704’s COAXIAL (or OPTICAL) DIGITAL
AUDIO OUTPUT to an optical (or coaxial) input on
your AV receiver, as shown.
R
ANALOG
INPUT
(white)
(white)
(red)
RCA/phono cable
(red)
L
Coaxial digital
Signal flow
AUDIO
OUTPUT
cable (supplied)
ANALOG
R
COAXIAL
OPTICAL
Optical
digital
cable
Note:
Connect one or
the other
• When you use the analog audio outputs, don’t play
DTS CDs or don’t select DTS soundtracks on
OPTICAL
COA
XIAL
DVD-Video discs. Doing so will produce unpleasant
digital noise, which may damage your equipment.
AV component with
Dolby Digital/DTS decoder
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the DV-CP704—Continued
Digital Connection
Connecting a Component with an
HDMI Input
Use an optical (or coaxial) digital audio cable to connect
the DV-CP704’s COAXIAL (or OPTICAL) DIGITAL
AUDIO OUTPUT to an optical (or coaxial) input on
your stereo amp, as shown.
This section shows how to connect the DV-CP704 to a
AV receiver, HDTV, or projector that has an HDMI input
socket.
Signal flow
What is HDMI?
OPTICAL
COA
XIAL
HDMI (High Definition Multimedia Interface) is a new
connection format that can carry uncompressed, stan-
dard or high definition digital video and up to eight chan-
nels of digital audio. Until now, several separate video
and audio cables have been required to connect AV com-
ponents together. With HDMI, a single cable is all that’s
necessary to achieve the best picture and audio quality.
HDMI video is compatible with DVI (Digital Visual
Interface). To send HDMI video to a DVI input requires
an HDMI-to-DVI cable. The DV-CP704 supports HDCP
(High-bandwidth Digital Content Protection), and for an
HDMI-to-DVI connection to work, the other component
must also support it. Note that this may not work with
some DVI components.
Connect one or the other
COAXIAL
OPTICAL
Optical
digital cable
Coaxial
digital
cable
(supplied)
Notes:
• Be sure to set the Audio menu, Digital/HDMI Audio
unpleasant digital noise may be heard, which may
damage your equipment.
• Never connect the DV-CP704 to the AC-3RF input on
a Dolby Digital receiver. The AC-3RF format is not
supported by the DV-CP704.
Using HDMI
Use the HDMI cable to connect the DV-CP704’s HDMI
OUT to an HDMI input on your AV receiver. Alterna-
tively, you can connect the DV-CP704 directly to the
HDMI input on your TV.
Signal flow
HDMI cable
HDMI
IN
HDTV,
projector
or
AV receiver
HDMI
IN
HDMI
HDMI
IN
HDTV,
projector
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the DV-CP704—Continued
Notes:
Connecting
Components
-compatible
• The DV-CP704 supports HDCP (High-bandwidth
Digital Content Protection), a protection system for
digital video. HDMI components that you connect to
the DV-CP704 must also support HDCP.
• The DV-CP704 supports High-Definition Multimedia
Interface Specification Information Version 1.0.
AV receiver
HDMI & the DV-CP704
IN
■ Video
L
REMOTE
CONTROL
The DV-CP704’s HDMI OUT supports the following
video resolutions:
R
• 720 x 480p 60 Hz
• 720 x 576p 50 Hz (Australian model only)
• 1280 x 720p 50/60 Hz
• 1920 x 1080i 50/60 Hz
If the connected HDTV or projector doesn’t support a
resolution, you may get no picture.
On the DV-CP704, you can select a resolution suitable
for use with the connected HDTV or projector (see
■ Audio Formats
The DV-CP704’s HDMI OUT supports the following
audio formats:
• The remote controller supplied with Onkyo AV
receiver or amplifiers can be used to control the
DV-CP704.
• PCM (48 kHz, 44.1 kHz, 96kHz)
• Dolby Digital
• DTS
• The function of the upper and lower
the same. Connect to either one.
connectors are
If your TV only supports HDMI digital audio up to
48 kHz, change the Linear PCM Out setting to Down
If your TV doesn’t support Dolby Digital, set the Digital/
If your TV doesn’t support DTS, the DV-CP704 will not
be able to play DTS format audio or soundtracks. In this
case, on your DVD-Video disc’s audio setup menu,
select an audio format other than DTS.
• Connecting an
cable only does not make the sys-
tem operational. You must also connect the audio
cables as well.
• For remote control operation, you must make an ana-
log RCA connection between your DV-CP704 and the
other AV component, even if they are connected digi-
tally.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Powering Up & Setting Up the DV-CP704
STANDBY/ON
ON STANDBY
Initial Setup
TV Shape
√ 4:3 Letter box
4:3 Pan Scan
HDMI Output Setting
On-Screen Language
16:9 Widescreen
16:9 Compressed
STANDBY indicator
ENTER
Here you need to specify the size of your TV (standard
4:3 or widescreen 16:9), specify a HDMI output setting,
and select a language for the onscreen setup menus.You
can change these settings later by using the onscreen
Use the remote controller’s Up/
Down [ ]/[ ] buttons to select aTV
shape, and then press [ENTER].
the TV Shape options.
1
Powering Up the DV-CP704
Remote controller
Before connecting the power cord, connect all your AV
Don’t forget to turn on your TV or projector and select
the video input to which the DV-CP704 is connected.
If you’re using a hi-fi amp, AV receiver, or surround
sound decoder for audio playback, turn that on as well
and select the audio input to which the DV-CP704 is
connected.
The HDMI Output Setting menu
appears.
Select a HDMI Output Setting
option, and then press [ENTER].
the HDMI output options.
The On-Screen Language menu
appears.
2
Remote controller
Connect the power cord to a suit-
able wall outlet.
1
The DV-CP704 enters Standby mode,
and the STANDBY indicator comes on.
Select a language, and then
press [ENTER].
the language options.
To turn on the DV-CP704, press
3
2
the [STANDBY/ON] button (or the
remote controller’s [ON] button).
The DV-CP704 comes on, the display
lights up, and the STANDBY indicator
goes off.
Remote controller
The Initial Setup menu closes.
To turn off the DV-CP704, press the
Remote controller
[STANDBY/ON] button (or the remote
controller’s [STANDBY] button). The
DV-CP704 enters Standby mode and
the STANDBY indicator comes on.
tion on selecting and playing discs.
Notes:
• You can cancel the Initial Setup by pressing the
OPEN/CLOSE [ ] button, and complete the settings
• You can change the language of the onscreen setup
menus, and your preferred languages for DVD menus,
foreign language soundtracks, and subtitles individu-
ally on the Language page of the onscreen setup
First Time Setup
The very first time you turn on your DV-CP704, the Ini-
tial Setup menu appears onscreen, as shown.
• Not all DVD-Video discs have multi-language menus,
foreign language soundtracks, and subtitles. In such
cases, the disc’s default language is used.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Playback
Tip: If you press the Play [ ] button,
the disc tray will close and playback of
the disc in the right bay will start auto-
matically. If there is no disc in that bay,
the DV-CP704 will check the other
bays and play the first disc it finds.
Tip: If you press one of the DISC
SELECT 1–6 buttons, the disc tray will
close and playback of the selected disc
will start automatically.
DISC SKIP
OPEN/CLOSE
DISC
DISC SKIP SELECT
PLAY
Notes:
• You can load up to six discs.You don’t have to load all
six discs every time.
• When the disc tray is closed, all of the disc indicators
appear until the DV-CP704 has checked each bay for
the presence of a disc. If a bay is found to have no disc,
the corresponding indicator disappears.
• The disc tray can be opened and closed even while the
DV-CP704 is in Standby mode, so you don’t have to
turn it on to load or remove your discs. (The disc tray
may take several seconds to open.)
Loading & Removing Discs
• The DV-CP704 supports 8 cm and 12 cm discs. To
avoid damaging your discs or DV-CP704, always
place discs in the center of the disc bays.
DVD
CD
MP3
WMA
JPEG
This section explains how to load and remove discs.
• Only load discs that are supported by the DV-CP704
(see page 7). Don’t load cartridge-type discs.
• To avoid personal injury, keep your hands away from
the disc tray as it closes.
• Always use the OPEN/CLOSE [ ] button to open
and close the disc tray. Never push the disc tray, and
don’t touch it, or obstruct it while it’s opening or clos-
ing. Don’t press down on the disc tray while it’s open,
and don’t load anything other than supported discs.
Doing so may damage your discs or DV-CP704.
Press the OPEN/CLOSE [
button.
The disc tray opens and the six disc
number indicators appear on the dis-
play. A circle appears around the num-
ber of the disc bay on the right.
]
1
Remote controller
Place a disc, label side up, into
each bay.
2
3
Press the [DISC SKIP] button to
access the other disc bays.
The disc tray turns counterclockwise
two bays at a time.
Remote controller
Press the remote controller’s DISC
SKIP [+] button to turn the disc tray
counterclockwise. Press the DISC
SKIP [–] button to turn it clockwise.
When you’ve finished, press the
OPEN/CLOSE [ ] button again.
The disc tray closes.
4
ing and playing discs.
Remote controller
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Playback—Continued
Selecting Discs
DISC SKIP
OPEN/CLOSE
DISC
DVD
CD
MP3
WMA
JPEG
DISC SKIP SELECT
The section explains how to select loaded discs.
Use the DISC SELECT buttons to
select loaded discs.
On the display, the number of the cur-
rent disc has a circle around it.
What happens next depends on the type
of disc you selected, as follows:
DVD-Video:
Typically a menu appears onscreen.
Audio CD:
Loading Discs During Playback
DVD
CD
MP3
WMA
JPEG
Playback starts automatically.
MP3/WMA/JPEG:
This section explains how to load and remove discs with-
out stopping playback.
Playback starts automatically,
although this may vary depending
on the disc.
Press the OPEN/CLOSE [
button.
The disc tray opens.
]
1
JPEG-only CD:
The slideshow starts automatically.
The disc that’s currently playing
Remote controller
remains inside the DV-CP704 and its
disc bay is empty and won’t come to the
front. To remove this disc you must
stop playback before pressing the
OPEN/CLOSE [ ] button.
Notes:
• The type of disc currently selected is shown on the dis-
play: DVD, or CD (see page 12).
• You can select discs while the DV-CP704 is stopped
or during playback.
• You can use the [DISC SKIP] button to skip the cur-
rent disc and start the next disc. If disc #6 is the current
disc, disc #1 will be selected next.
Load or remove discs as
required, and press the [DISC
SKIP] button to access the other
disc bays.
2
Remote controller
When you’ve finished, press the
OPEN/CLOSE [ ] button again.
The disc tray closes.
3
Playback of the current disc continues
uninterrupted until you either stop
playback or select another disc.
Tip: If you press one of the DISC
SELECT 1–6 buttons, the disc tray will
close, playback of the current disc will
stop, and playback of the newly
selected disc will start automatically.
Remote controller
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Playback—Continued
Notes:
• During playback, you can select chapters or tracks by
using the Next [
] and Previous [
] buttons.
• When you stop playback of a DVD-Video disc, the
DV-CP704 remembers the point at which playback
was stopped. To resume playback from that point,
press the Play [ ] button. To cancel the Resume func-
tion, press the Stop [ ] button again. The Resume
function is reset when another disc is selected.
• With the Last Memory function you can resume play-
back from a specific point even if the disc has been
removed (see page 40).
PAUSE
STOP
PLAY
ENTER
• Do not move the DV-CP704 or subject it to vibration
during playback. Doing so may damage your discs or
DV-CP704.
• Prolonged display of the same picture or menu may
cause irreparable damage to your TV screen, known as
screen burn-in. To prevent this, don’t keep playback
paused for too long and always press the Stop [ ] but-
ton when you’ve finished playing a DVD-Video disc.
Your DV-CP704 features a screen saver to protect
your TV from the effects of burn-in (see page 46).
Starting, Pausing & Stopping
Playback
DVD
This section explains how to start, pause, and stop play-
back.
With some DVD-Video discs, you may experience pic-
ture noise that is not normally visible with regular TV
broadcasts. This is usually because DVD-Video discs
uses a lot of high-resolution video data. The amount of
noise, if any, will depend on your particular TV and the
problem can sometimes be alleviated by turning down
your TV’s sharpness control.
■ Start
To start playback, press the Play
] button.
[
Playback starts and the Play indica-
tor appears on the display.
If the disc is a DVD-Video, you may
need to start playback from a menu (see
Remote controller
■ Pause
To pause playback, press the
Pause [ ] button.
Playback pauses and the Pause indi-
cator appears on the display.
To resume playback, press the Play [
button.
]
Remote controller
Playback resumes and the Pause
indicator disappears.
■ Stop
To stop playback, press the Stop
[ ] button.
Playback stops and the Play indica-
tor disappears.
Remote controller
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Playback—Continued
• With DVD-Video discs, foreign language soundtracks
and audio formats can usually be selected during play-
back by using the remote controller’s [AUDIO] button
(see page 38). Similarly, subtitles can be selected by
using the remote controller’s [SUBTITLE] button (see
AUDIO
ENTER
SUBTITLE
TOP MENU
MENU
Navigating Disc Menus
DVD
DVD-Video discs usually have an onscreen menu from
which you can select titles, chapters, and other options,
including foreign language soundtracks, subtitles, and
audio formats (e.g., Dolby Digital or DTS).
Load and select a DVD-Video
disc.
1
With DVD-Video discs, a menu usually
appears automatically. If it doesn’t, try
pressing the [TOP MENU] button.
Use the remote controller’s navi-
gation [ ], [ ], [ ], [ ] buttons to
select items on the menu, and
2
Remote controller
use the [ENTER] button to con-
firm your selection.
If you select a playback option (e.g.,
subtitles), another menu of options will
typically appear, in which case you use
the remote controller’s navigation but-
tons to select items and the [ENTER]
button to confirm your choice.
Notes:
• Not all DVD-Video discs have menus.
• Menu operation varies from disc-to-disc. See the
disc’s sleeve notes for details.
• On some DVD-Video discs, options such as foreign
language soundtracks, subtitles, and audio formats
appear on a separate menu called the disc menu, and
titles and chapters appear on what’s called the title
menu. To display the disc menu, press the [MENU]
button. If no menu appears, press the [TOP MENU]
button.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Playback—Continued
A Folder number and file number.
B Elapsed time, remaining time, and
total time of currently playing
song. (Only elapsed time is shown
C Repeat function and Random
function status.
PLAY
D For JPEG files, a preview and the
STOP
file size are displayed here.
E Information about the song
currently playing (e.g., song title,
artist name, album name) is
displayed here, if available.
MEMORY
Press the Play [ ] button to start play-
back. Press the Stop [ ] button to stop
playback. Press the Pause [ ] button to
pause playback and the Play [ ] button
to resume it.
2
Remote controller
ENTER
TOP MENU
MENU
For audio CDs:
Use the Up/Down [ ]/[ ] buttons to
RETURN
select a track, and press the Play [
]
button (or [ENTER]) to start playback.
You can select the next or previous
track during playback by using the
Next [
Press the Previous [
restart the current track. Press it again
to select earlier tracks.
Alternatively, the number button is
used to select a track.
] and Previous [
] buttons.
Using the Disc Navigation Window
] button to
CD
MP3
WMA
JPEG
On the disc navigation window, you can select CD tracks
or MP3, WMA, or JPEG files.
Load and select an audio CD or
MP3, WMA, or JPEG disc.
1
For MP3, WMA, and JPEG discs:
To open a folder, use the remote con-
troller’s Up/Down [ ]/[ ] buttons to
select it, and then press [ENTER].
Use the Up/Down [ ]/[ ] buttons to
select tracks in the open folder.
The disc navigation window appears.
It may take a while to read the contents
of discs that contain many files and
folders.
You can select the next or previous
track during playback by using the
For JPEG discs, a slideshow starts auto-
matically. To open the disc navigation
window, press the [MENU] button.
Next [
] and Previous [
] buttons.
Press the Previous [
] button to
This is the display for an MP3 disc.
restart the current track. Press it again
to select earlier tracks.
1
2
Use the Left/Right [ ]/[ ] buttons to
select other folders.
Play
1/10
Disc
4: DATA
00:00:24
1/8
00:05:06
00:05:30
/MP3 music
001. ROOT
Repeat
Ramdom
: Off
: Off
To close a folder (i.e., move back up the
directory tree), press the [RETURN]
button.
When all the tracks in that folder have
been played, tracks in the next folder
are played.
3
002. MP3 music
003. Onkyo 1
004. Onkyo 2
001. Track01
002. Track02
003. Track03
004. Track04
M
M
M
M
P
3
P
3
4
5
P
3
P
3
Name: Onkyo Title
Artist Name: Onkyo Artist
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Playback—Continued
If the disc contains MP3/WMA files
Number
buttons
and JPEG files, they are played/dis-
played in order. JPEG files will be dis-
played in a slideshow. Press the
[TOP MENU] button to display the
first nine pictures at thumbnail-size
the first nine pictures may be displayed
automatically.
SEARCH
CLR
Press the Stop [ ] button to stop
playback.
3
PLAY
ENTER
Remote controller
Notes:
• You can use the Random Playback function to play a
• During random playback, memory playback, or party
mode playback, the remote controller’s navigation
[ ], [ ], [ ], [ ] buttons, OPEN/CLOSE [ ] button,
and DISC SKIP [+]/[–] buttons cannot be used with
the disc navigation window.
SelectingTitles,Chapters &Tracks by
Number
DVD
CD
MP3
WMA
This section explains how to select titles, chapters, and
tracks by number.
• Depending on their size and format, some JPEG files
cannot be displayed.
Load and select a disc.
1
Press the [SEARCH] button.
The Search window appears onscreen,
as shown.
2
Remote controller
This is the display for a DVD-Video
disc.
Step
1: DVD
Search
Disc
Disc
Title
Chapter
1:DVD-VIDEO Current/Total 2/
3
Current/Total 4/ 22
With some DVD-Video discs, you can
select only titles, and the Chapter Cur-
rent/Total information is not displayed.
Some discs won’t allow you to select
titles.
For audio CDs, you can select tracks.
For MP3 and WMA discs, you can
select tracks and folders.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Playback—Continued
Use the number buttons to spec-
Locating Specific Points in Time
3
ify a chapter or title.
To enter, for example, “2,” press the [2]
button.
DVD
CD
Remote controller
With the Time Search function you can locate specific
points in time.
Step
1: DVD
Search
Disc
Press the [SEARCH] button
twice.
The Search window appears onscreen,
as shown.
Disc
Title
Chapter
1
1:DVD-VIDEO Current/Total 2/
3
Current/Total 2/ 22
Remote controller
To enter, for example, “12,” press the
[1] button, followed by the [2] button.
Search
Step
1: DVD
Search
Disc
Disc
Title
-- : -- : --
1: DVD-VIDEO
Disc
Title
Chapter
1:DVD-VIDEO Current/Total 2/
3
Current/Total 12
/
22
Use the number buttons to enter
a time.
To enter, for example, 1 hour, 25 min-
utes, 30 seconds, press the [1], [2], [5],
[3], and [0] buttons.
2
To clear the number, press the [CLR]
button.
Use the Left/Right [ ]/[ ] buttons to
toggle between Title and Chapter or
Folder and Track.
Remote controller
Search
Press the Play [ ] or [ENTER]
button to start playback of the
specified chapter or title.
Disc
Title
1 : 25 : 30
4
1: DVD-VIDEO
During playback, you can select other
To enter, for example, 2 minutes, 15
seconds, press the [2], [1], and [5] but-
tons.
Remote controller
chapters by using the Next [
Previous [ ] buttons.
] and
Search
Disc
Title
0 : 02 : 15
1: DVD-VIDEO
Press the Play [ ] button to
locate the specified point.
Playback starts from the specified
point.
3
Notes:
• You can also select chapters by using the number but-
tons, without opening the Search window.
• If the current DVD-Video disc contains only one title,
you won’t be able to select other titles. Similarly, if it
contains no chapters, you won’t be able to select chap-
ters.
Remote controller
• DVD-Video discs usually have onscreen menus for
• With some discs you may not be able to select titles
and chapters as described here.
Notes:
• The Time Search function works only within the cur-
rently playing title (DVD-Video) or track (audio CD).
For example, if the current title is one hour long and
you enter the time 1 hour, 30 minutes, nothing will
happen.
• In some cases, playback may start from a slightly dif-
ferent point to the one you specified.
• Time Search may not work with some discs.
• You can’t use the [SEARCH] button during random
playback, memory playback, or party mode playback.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Playback—Continued
Frame-by-Frame Playback
Number
buttons
SEARCH
DVD
With the Frame-by-Frame Playback function, you can
forward playback one frame at a time.
Press the Pause [ ] button to
pause playback, and then press
the Pause [ ] button repeatedly
1
Remote controller
to forward playback one frame at
a time.
PAUSE
PLAY
To resume normal playback,
press the Play [ ] button.
2
Remote controller
Notes:
Fast Forward & Reverse
• No sound is output during frame-by-frame playback.
• Prolonged display of the same picture or menu may
cause irreparable damage to your TV screen, known as
screen burn-in. To prevent this, don’t display the same
frame for too long. Your DV-CP704 features a screen
saver to protect your TV from the effects of burn-in
DVD
CD
MP3
The section explains how to fast forward and reverse.
■ Fast During playback, press the Fast
forward Forward [ ] button to start fast
forward.
Remote controller
Playback fast forwards and “x 2”
appears onscreen.
To change the fast-forward speed, press
the Fast Forward [ ] button repeat-
edly to select: x 2, x 4, x 8, or x 16.
Remote controller
To resume normal playback,
press the Play [ ] button.
■ Fast
reverse
During playback, press the Fast
Reverse [ ] button to start fast
reverse.
Remote controller
Playback reverses and “x 2” appears
onscreen.
To change the fast-reverse speed, press
the Fast Reverse [ ] button repeat-
edly to select: x 2, x 4, x 8, or x 16.
Remote controller
To resume normal playback,
press the Play [ ] button.
Notes:
• No sound is output during fast forward or fast reverse
of a DVD-Video or MP3 disc.
• Fast forward and fast reverse cannot be used with
WMA files.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Playback—Continued
Slow-motion Playback
Adjusting the Display Brightness
DVD
You can adjust the brightness of the display as follows.
With the Slow-motion Playback function you can watch
a scene slowly either forward or backward.
Press the [DIMMER] button
repeatedly to cycle through the
following options:
Disc tray light off + normal brightness
Disc tray light off + dim
Disc tray light off + dimmer
1
■ Forward During playback, press the
slow
SLOW [ ] button.
motion
Forward slow-motion playback starts
and “ 1/2” appears onscreen.
To change the slow-motion speed, press
the SLOW Forward [ ] button repeat-
edly to select: 1/2, 1/4, 1/6, or 1/8.
Remote controller
Disc tray light on + normal brightness
Notes:
• When the display brightness on another Onkyo AV
component connected via
is changed, the “disc
■ Backward During playback, press the
tray light off” option might not work.
• Even if you selected the “disc tray light off” option,
the disc tray light will come on when the disc tray is
opened.
slow
motion
SLOW [ ] button.
Backward slow-motion playback starts
and “ 1/2” appears onscreen.
To change the slow-motion speed, press
the SLOW Back [ ] button repeatedly
to select: 1/2, 1/4, 1/6, or 1/8.
Remote controller
■ Resume To resume normal playback,
playback press the Play [ ] button.
Remote controller
Notes:
• No sound is output during slow-motion playback.
• The slow-motion speed indication is only approxi-
mate, and the actual speed will vary from disc to disc.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Playback—Continued
To pause the slideshow, press the [ ]
button. Press the Play [ ] button to
resume.
To zoom in or out, use the Fast Forward
[
] and Fast Reverse [ ] buttons.
Use the Left/Right [ ]/[ ] and Up/
Down [ ]/[ ] buttons to move around
the picture while zoomed in. To cancel
the zoom, press the Play [ ] button.
To return to the navigation window,
press the [MENU] button.
PAUSE
STOP
PLAY
ENTER
TOP MENU
MENU
To view the thumbnail display, press
the [TOP MENU] button.
Use the Next [
] and Previous [
]
buttons to display the next or previous
thumbnail page.
To stop the slideshow, press the
Stop [ ] or [MENU] button.
Depending on the type of JPEG disc,
either the first nine pictures appear in
thumbnail-size or the disc navigation
window appears.
Using JPEG CDs
3
The DV-CP704 supports JPEG CDs, so you can view
your photos on TV either individually or as a slideshow.
Remote controller
Load and select a CD containing
JPEG pictures.
1
The slideshow stops automatically
when all pictures have been displayed.
The slideshow starts automatically.
With some JPEG discs, the first nine
pictures automatically appear onscreen
at thumbnail-size when the disc is
selected.
Notes:
• You can view JPEG images in high definition by
• The Memory and Random functions cannot be used
with JPEG files.
Use the Next [
] and Previous [
]
buttons to display the next or previous
thumbnail page.
Use the [ ], [ ], [ ], [ ] buttons to
select a picture, and then press the Play
[
] or [ENTER] button to start the
slideshow.
You can use the following func-
tions during the slideshow:
2
To display the next or previous picture,
use the Next [
buttons.
] and Previous [
]
To turn a picture upside down, use the
Up/Down [ ]/[ ] buttons (not while
zoomed in).
To rotate a picture clockwise or coun-
terclockwise, use the Left/Right [ ]/
[ ] buttons (not while zoomed in).
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Playback—Continued
CHAIN MODE
PARTY MODE
Using Chain Mode
Using Party Mode
DVD
CD
MP3
WMA
CD
MP3
WMA
With the Chain mode function, you can play all discs, all
DVD-Video discs, or all audio CDs and MP3/WMA
discs consecutively as if they were one big disc.
With the Party mode function, you can play all of the
audio CDs and MP3/WMA discs in random order.
Press the [PARTY MODE] button.
The CHAIN MODE and CD indicators
appear.
All loaded audio discs, including MP3
and WMA discs, are played in random
order.
Press the [CHAIN MODE] button
repeatedly to select CD, DVD, or
ALL.
1
Remote controller
The CHAIN MODE indicator flashes
on the display.
Press the Stop [ ] button to stop Party
ALL:
mode playback and cancel the Party
mode function.
All discs are played consecutively.
DVD:
Remote controller
All DVD-Video discs are played
consecutively.
CD:
All audio CDs, including MP3 and
WMA discs, are played consecu-
tively.
To cancel Chain mode, press the
[CHAIN MODE] button repeatedly
until the CHAIN MODE indicator dis-
appears.
While the CHAIN MODE indicator
2
is flashing, press the Play [
]
button to start Chain mode play-
back.
Remote controller
The Chain mode function will be can-
celled if you do not start playback
within 5 seconds of pressing the
[CHAIN MODE] button.
Note:
• JPEG files are skipped during Chain mode playback.
• With the DVD and All Chain modes, DVD-Video
menus are ignored and titles are played automatically.
This may not work with some discs.
• You can’t use the repeat functions with Chain mode.
• You can use the Random function with Chain mode.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Playback
Notes:
• Repeat Playback may not work with some
DVD-Video discs.
• If you press the [REPEAT] button while the Memory
memory list will play repeatedly.
• The Repeat function cannot be used with Chain mode
or Party mode.
REPEAT
PLAY
• If you select another disc, repeat playback is can-
celled.
SEARCH
REPEAT
A-B
• The Repeat function can be used in combination with
RANDOM
A–B Repeat Playback
MP3
DVD
CD
With the A–B Repeat Playback function you can play a
specified section over-and-over again.
During playback, press the [A–B]
button to set the A point (i.e., the
1
Remote controller
start of the section you want to
repeat).
“Repeat A–” appears onscreen.
Repeat Playback
JPEG
DVD
CD
MP3
WMA
Press the [A–B] button again to
set the B point (i.e., the end of the
section you want to repeat).
Playback repeats between the A and B
points, and “Repeat A–B” appears
onscreen.
With the Repeat Playback function you can play the cur-
rent disc, title, chapter, track, or folder of MP3/WMA
files over-and-over again.
2
Remote controller
Press the [REPEAT] button
repeatedly to select a repeat
option.
1
To cancel A–B Repeat Playback,
press the [A–B] button to select
Off.
3
The currently selected repeat option
appears onscreen and “REPEAT”
appears on the display.
Remote controller
Remote controller
The available options depend on the
current disc type, as follows:
DVD-Video:
Chapter, Title, 1 Disc, All Disc.
Audio CD:
Track, 1 Disc, All Disc.
MP3/WMA/JPEG:
Notes:
• A–B Repeat Playback may not work with some
DVD-Video discs.
Track, Folder, 1 Disc, All Disc.
Press the Play [ ] button to start
repeat playback.
• In some cases, the A and B points may be at slightly
different points to the ones you specified.
2
Remote controller
To cancel Repeat Playback, use
the [REPEAT] button to select
3
Remote controller
Off.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Playback—Continued
• You can’t use the [SEARCH] button during random
playback.
Random Playback
DVD
CD
MP3
WMA
• During random playback, the remote controller’s nav-
igation [ ], [ ], [ ], [ ] buttons and number buttons
cannot be used with the disc navigation window.
• If you select another disc, random playback is can-
celled, except when the random option is set to “All
Disc,” in which case playback continues.
With the Random Playback function you can enjoy a
random selection of discs, titles, chapters, tracks, or
MP3/WMA folders.
Select a disc.
1
• The Random Playback function can be combined with
the Repeat Playback function.
Press the [RANDOM] button
repeatedly to select a random
2
Remote controller
option.
The currently selected random option
appears onscreen.
The available options depend on the
current disc type, as follows:
DVD-Video:
Title, 1 Disc, All Disc.
Audio CD:
1 Disc, All Disc.
MP3/WMA:
Folder (files in subfolders are not
played), 1 Disc, All Disc.
With the “Title” option, chapters within
the current title are played at random.
With the “1 Disc” option, all titles,
chapters, tracks, and folders on the cur-
rent disc are played at random.
If you press the [RANDOM] button
during playback, random playback
begins after the current chapter, or track
has finished.
Press the Play [ ] button to start
random playback.
3
Random playback starts.
Remote controller
To cancel random playback, use
the [RANDOM] button to select
4
Remote controller
Off.
Notes:
• To select the next random disc, title, chapter, track, or
MP3/WMA folder during random playback, press the
Next [
] button.
• Random playback may not work with some
DVD-Video discs.
• Random playback cannot be used with the Memory
Playback function.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Playback—Continued
Press the [ENTER] button.
The new item is added to the memory
list as step 01.
3
Remote controller
Number
buttons
MEMORY
Memory List
No. Disc
1
Title/Folder
001 / 002
Chapter/Track
--- / 008
CLR
ANGLE
01
1
001 / 002
--- / ---
--- / ---
--- / ---
--- / ---
005 / 008
--- / ---
--- / ---
--- / ---
--- / ---
02
03
04
05
-
-
-
-
ENTER
Repeat steps 2 and 3 to add more
items to the memory list.
4
New items will be added to the memory
list as steps 02, 03, and so on.
To play the memory list, press
the Play [ ] button.
5
Remote controller
Memory Playback
DVD
CD
MP3
WMA
With the Memory Playback function, you can create
your own memory list of up to 32 titles, chapters, or
tracks.
To stop playback, press the Stop
[ ] button.
6
Remote controller
Press the [MEMORY] button.
The Memory List window appears
1
Remote controller
onscreen, as shown.
Memory List
No. Disc
1
Title/Folder
001 / 002
Chapter/Track
--- / 008
Inserting New Items in the List
01
02
03
04
05
-
-
-
-
-
--- / ---
--- / ---
--- / ---
--- / ---
--- / ---
--- / ---
--- / ---
--- / ---
--- / ---
--- / ---
To insert a new item into the
Remote controller
memory list, use the Up/Down
[ ]/[ ] buttons to select the step
before which you want to insert
the new item, and then press the
[ENTER] button.
The top row ( ) is used to enter disc,
title/folder, and chapter/track numbers.
Steps in the memory list are numbered.
Enter the disc, title/folder, and
chapter/track numbers of the
item you want to add to the mem-
ory list.
Use the remote controller’s Left/Right
[ ]/[ ] buttons to select the parame-
ters, and use the number buttons to
select Title/Folder or Chapter/Track.
The number of the currently selected
disc is already entered.
2
Memory List
No. Disc
1
Title/Folder
001 / 002
Chapter/Track
--- / 008
Remote controller
01
02
03
04
05
1
-
001 / 002
--- / ---
005 / 008
--- / ---
1
3
-
001 / 002
001 / ---
--- / ---
003 / 008
--- / 008
--- / ---
Remote controller
Enter the disc, title/folder, and
chapter/track numbers of the
item to be inserted.
Press the [ENTER] button.
The new item is inserted into the mem-
ory list and subsequent items move
down the list.
To add all of the titles, folders, chapters,
or tracks on the disc, press the [+10]
button.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Playback—Continued
Deleting Items from the List
Selecting Camera Angles
DVD
To delete an item, use the Up/
Remote controller
Down [ ]/[ ] buttons to select it,
and then press the [CLR] button.
The item is deleted and subsequent
items move up the list.
Some DVD-Video discs feature multiple camera angles
that allows you to view scenes from different angles. If
the currently playing DVD-Video disc features multiple
camera angles, the camera indicator appears onscreen
and on the display. Such a disc usually has the multiple
camera angle logo ( ) printed on its sleeve notes.
Press the [ANGLE] button
Remote controller
repeatedly to cycle through the
available camera angles.
The number of the currently selected
camera angle appears onscreen. For
example, on a disc with three camera
angles, you’d see 1/3, 2/3, and 3/3.
Editing Steps
To edit a step, use the Up/Down
[ ]/[ ] buttons to select it, edit
the disc, title/folder, and chapter/
1
Notes:
Remote controller
• With some DVD-Video discs you may not be able to
select different camera angles even though the camera
indicator is displayed.
track numbers, and then press
the [ENTER] button.
• With some DVD-Video discs you can select camera
angles from a menu.
• Some DVD-Video discs won’t allow you to select dif-
ferent camera angles while playback is paused.
To close the Memory Play Setup
window, press the [RETURN] but-
2
Remote controller
ton.
• Deleting the memory list:
Press the Stop button to stop playback of the memory
list, and while “Memory” is displayed onscreen, press
the [CLR] button. The memory list is deleted and
“Memory Clear” is displayed onscreen.
Notes:
• The entire memory list is cleared when the DV-CP704
is set to Standby.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Playback—Continued
Selecting Subtitles
DVD
Some DVD-Video discs feature subtitles in several lan-
guages. See the disc’s sleeve notes for details.
AUDIO
SUBTITLE
During playback, press the [SUB-
Remote controller
TITLE] button repeatedly to cycle
through the available subtitles.
The name of the selected subtitle
appears onscreen for several seconds.
To turn off subtitles, use the [SUBTI-
TLE] button to select Off.
Notes:
• With DVD-Video discs, when you stop playback and
another disc, the subtitle language will revert to your
default subtitle language.
• With some DVD-Video discs you can select subtitles
from a menu, and you may not be able to select subti-
tles during playback.
Selecting Languages & Audio
Formats
DVD
Some DVD-Video discs feature soundtracks in several
languages and audio formats (e.g., Dolby Digital or
DTS). Music DVD-Video discs sometimes feature
soundtracks in several audio formats, such as PCM or
Dolby Digital 5.1. See the disc’s sleeve notes for details.
• To check the subtitle language currently selected,
press the [SUBTITLE] button once. The current set-
ting will appear onscreen for several seconds.
During playback, press the
Remote controller
[AUDIO] button repeatedly to
cycle through the available
soundtracks.
The name of the selected soundtrack
appears onscreen for several seconds.
Notes:
• With DVD-Video discs, when you stop playback and
another disc, the soundtrack language will revert to
default language.
• With some discs, selecting another soundtrack may
cause the picture to skip momentarily.
• With some DVD-Video discs you need to select
soundtracks from a menu, and you may not be able to
select other soundtracks during playback.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Playback—Continued
480p(480p/576p):
The setting displayed depends on
the country in which you purchased
the DV-CP704.
720 × 480p 60Hz or 720 × 576p
50Hz
Also output by the DV-CP704’s
analog video outputs.
720p:
1280 × 720p 50/60Hz
Not output by the DV-CP704’s ana-
log video outputs.
RESOLUTION
1080i:
1920 × 1080i 50/60Hz
Not output by the DV-CP704’s ana-
log video outputs.
Tip:
Setting the HDMI
These settings can also be changed by using the onscreen
This section explains how to turn HDMI on and off and
change the video resolution when your TV or projector
is connected to the HDMI OUT.
Notes:
• Depending on your setup, you may find that there’s no
picture when you turn on HDMI. In this case, you
need to check the HDMI resolution setting and your
TV’s settings. If there is no picture, press the [RESO-
LUTION] button repeatedly until the picture reap-
pears.
• While HDMI is on and the resolution is set to 480p
(480p/576p), the component video output is fixed at
progressive video.
Press the [RESOLUTION] button
to turn HDMI on or off.
1
If HDMI is off, “HDMI OFF” appears
on the display the first time the button is
pressed. Press the button again while
“HDMI OFF” is displayed to turn on
HDMI.
To turn off HDMI, press and hold the
[RESOLUTION] button.
Press the [RESOLUTION] button
on the remote controller repeat-
2
Remote controller
edly to change the HDMI resolu-
tion.
The fist button press displays the cur-
rent resolution onscreen. Press the but-
ton again while the resolution is
displayed to change the setting. The
DV-CP704 supports the following res-
olutions:
Auto:
The resolution is automatically set
to the native resolution of the TV
connected to the HDMI OUT.
Depending on the resolution set-
ting on the TV, the DV-CP704 may
not output video from its analog
video outputs.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Playback—Continued
To resume playback from last
memory point, select “Yes,” and
then press [ENTER].
4
LAST MEMORY
Remote controller
To start playback from the beginning,
select “No,” and then press [ENTER].
To start playback from the beginning
and delete the last memory point, select
“Memory Clear,” and then press
[ENTER].
STOP
PLAY
ENTER
Notes:
• The Last Memory function can store the settings for
up to six DVD-Video discs. When you set the Last
Memory function for a seventh disc, the first disc’s set-
tings are lost.
Using Last Memory
• The Last Memory function will not work while a
menu is being displayed onscreen.
DVD
• The Last Memory function may not work with some
DVD-Video discs.
• Even if you select another disc, or inadvertently turn
off the DV-CP704 during playback, you can resume
playback from the same point when you select the disc
again.
With the Last Memory function you can resume play-
back from where you left off even if another disc has
been selected or the disc has been removed. Last Mem-
ory also remembers the soundtrack and subtitle lan-
guages that you were using.
During playback, press the
[LAST MEMORY] button.
1
Remote controller
The last memory point for the disc is
stored, the LAST indicator appears,
and “LAST MEM” appears on the dis-
play.
If the [LAST MEMORY] button is
pressed again, the last memory point
will be updated.
To stop playback, press the Stop
2
[ ] button once or twice.
At this point you may choose to
play another disc, or to turn off
Remote controller the DV-CP704.
To resume playback, select the
disc and press the Play [ ] but-
ton.
3
The Last Memory dialog box appears,
as shown.
Remote controller
Last Memory is set.
Start playback from memory location ?
Yes
No
Memory Clear
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Playback—Continued
Displaying Information
DVD
You can display various information about the current
disc, title, chapter, or track as follows.
DISPLAY
During playback, press the [DIS-
PLAY] button.
1
DISPLAY
Various information appears onscreen.
The operating status (e.g., Stop, Play,
Resume), disc number, and disc type
information is displayed along the top
ZOOM
Remote controller
of the screen.
DVD-Video:
Current title number, total number
of titles on disc, elapsed title time,
remaining title time, total title time,
selected soundtrack, selected subti-
tle, and the number of available
camera angles.
Zooming
JPEG
DVD-V
Press the [DISPLAY] button
With the Zoom function you can enlarge any part of the
picture.
2
again to see more information.
DVD-Video: Current chapter number,
total number of chapters in title,
elapsed chapter time, remaining chap-
ter time, total chapter time.
During playback or paused,
press and hold the [ZOOM] but-
1
Remote controller
Remote controller
ton.
The picture is enlarged.
Press the [DISPLAY] button
again to cancel the information
display.
Press the [ZOOM] again repeat-
edly to Zoom in.
The number of zoom steps available
depends on the resolution of the disc or
file.
3
2
Remote controller
Remote controller
After the maximum zoom, the picture
returns to its normal size.
To see other areas of the picture
while zoomed, use the remote
3
Remote controller
controller’s arrow [ ], [ ], [ ],
■ For audio CDs:
[
] buttons.
Pressing the [DISPLAY] button repeatedly during play-
back will display the following information:
• Elapsed track time (onscreen, the elapsed track time
and remaining track time will be displayed)
• Remaining track time
• Elapsed disc time (onscreen, the elapsed disc time and
remaining disc time will be displayed)
• Remaining disc time
Notes:
• During a JPEG slideshow, you can use the Fast For-
ward [ ] and Fast Reverse [ ] buttons to zoom in
and out.
• The Zoom function may not work with some DVDs.
• The Zoom function can also be used while playback is
paused or during slow-motion playback.
■ For MP3 and WMA discs:
Pressing the [DISPLAY] button repeatedly during play-
back will display the following information:
• Elapsed track time
• The Zoom function cannot be used with HD JPEG.
• Track name
• Folder name
• Total number of folders
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuring the DV-CP704
This chapter explains the various functions and settings of the onscreen setup menus.
Functions and settings are arranged into six menus: Picture, Audio, Language, Display, Operation Setting, and Initial.
The following table lists all the functions and settings, with a brief description and page number where you can find full
details.
Menu
Setting
Description
Page #
Select the aspect ratio that matches your TV.
Stretch the picture to fit your TV screen.
Turn HDMI video output on or off.
Set the component video output to progressive or interlaced.
Select the video resolution for the HDMI OUT.
For displaying JPEG images at a high resolution on a HDTV.
Choose a video black level.
Picture
Adjust the picture brightness.
Adjust the picture sharpness.
PAL Output Setting
Convert the disc’s video format.
Settings for the digital signal output by the optical, coaxial, and
HDMI digital audio outputs.
Audio
Select whether or not the DV-CP704 downsamples 96 kHz dig-
ital audio.
Dynamic Range Control
Set the Dynamic Range function.
Select a language for the onscreen setup menus and mes-
sages.
Language
Display
Select your preferred language for disc menus.
Select your preferred language for soundtracks.
Select your preferred language for subtitles.
Turn on or off onscreen messages and indicators.
Select a color for onscreen setup menus and messages.
Select a background color for when playback is stopped.
Set the Screen Saver function.
Operation
Setting
Set the Parental Lock function.
Security Code
Change a security code for use with parental lock.
Sets the Auto power off function.
Initial Setup TV Shape
HDMI Output Setting
On-Screen Language
This menu appears automatically the very first time you turn on
your DV-CP704. (These settings are available in other menus.)
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuring the DV-CP704—Continued
When you’ve finished, press the
[SETUP] button again.
The onscreen setup menu closes.
6
Remote controller
ENTER
SETUP
Picture Menu
Using the Onscreen Setup Menus
TV Shape
This section explains how to use the onscreen setup
menus.
With this setting you can select a picture format to match
the aspect ratio of your TV.
Turn on your DV-CP704 and TV.
On your TV, select the video input to
which the DV-CP704 is connected.
4:3 Letter box (default): Choose
this option if you have a standard
TV (4:3 aspect ratio). When you
watch widescreen DVD-Video
movies, the entire picture will be
visible and there will be black
1
Press the [SETUP] button.
The onscreen setup menu appears, as
shown.
2
Remote controller
bars at the top and bottom of the screen, as shown.
Picture
4:3 Pan & Scan: Choose this
option if you have a standard TV
(4:3 aspect ratio) and want to use
the full height of the screen when
watching widescreen
DVD-Video movies. In order to
use the full height of the screen, the picture will be
cropped on both sides, as shown. This option won’t
work with discs that don’t support pan and scan.
TV Shape
: 4:3 Letter box
: Normal
: Off
View Mode
HDMI Output Setting
Progressive Setting
HD Resolution
HD Jpeg mode
Video Black Level
Brightness
: Interlace
: Auto
: Off
: Light
: Level 4
: Level 4
Sharpness
16:9 Widescreen: Choose this option if you have a
widescreen TV (16:9 aspect ratio). Depends on TV,
the picture appears stretched when watching programs
in 4:3 format.
Use the remote controller’s navi-
gation buttons to navigate the
menus.
Use the Left/Right [ ]/[ ] buttons to
move left or right. Use the Up/Down
[ ]/[ ] buttons to move up or down.
3
Remote controller
16:9 Compressed: Choose
this option if you have a
widescreen TV (16:9 aspect
ratio) and the picture appears
stretched when watching pro-
grams in 4:3 format. Some
widescreen TVs have a setting to correct this. If your
TV doesn’t, and 4:3 programs appear stretched, select
this option to correct the problem.
When you’ve selected an item,
press the [ENTER] button to see
the available options.
4
Remote controller
Notes:
• This setting does not apply to DVD menus.
• When the HDMI OUT signal is at a resolution of 720p
or 1080i, programs in 4:3 format will appear stretched,
so we recommend that you select the 16:9 Com-
pressed option.
• With some DVD-Video discs this setting may have no
effect. See the disc’s sleeve notes to see which picture
format is used.
Use the navigation buttons to
select the options, and press the
[ENTER] button to confirm your
selection.
Press the [RETURN] button to go back
one step.
5
Remote controller
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuring the DV-CP704—Continued
View Mode
HD Resolution
With this setting you can adjust the aspect of the picture
so that it fits your TV screen. Due to your TV’s aspect
ratio setting and the DVD’s aspect ratio, black bars may
appear above and below the picture or at the sides and the
aspect of the picture may be unsuitable. In this case, use
this setting to adjust the aspect of the picture as you like.
With this setting you can set the video resolution for the
HDMI OUT.
Auto: The resolution is automatically set to the
native resolution of the TV connected to the HDMI
OUT.
480p (480p/576p) (default): The setting displayed
depends on the country in which you purchased the
DV-CP704.
Normal (default): The picture is displayed in its
original aspect ratio.
View Mode 1: The picture is stretched horizontally
720 x 480p 60 Hz or 720 x 576p 50 Hz
to make it fit the height of the screen.
720p: 1280 x 720p 50/60 Hz
View Mode 2: The picture is stretched vertically to
make it fit the width of the screen.
1080i: 1920 x 1080i 50/60 Hz
Tip:
View Mode 3: The picture is stretched horizontally
and vertically to make it fit the screen.
When the HDMI Output Setting is set to On, you can
also change this setting by using the remote controller’s
[RESOLUTION] button (see page 39).
Tip:
The view mode can also be changed by using
the remote controller’s [ASPECT] button.
Notes:
• Initially, the DV-CP704 is configured to output both
HDMI and analog video. However, if after changing
the resolution settings there’s no picture, with the ana-
log video connection or HDMI connection in place,
press the [RESOLUTION] button repeatedly to
restore the picture.
• IfAuto selected but the DV-CP704 doesn’t support the
TV’s native resolution, the resolution will be 480p/
576p.
Note:
• This setting does not apply to DVD menus.
HDMI Output Setting
With this setting you can turn the HDMI video output on
On (default): Video is output by the HDMI OUT.
Off: Video is not output by the HDMI OUT.
• When the resolution is set to 720p or 1080i, no video
is output by the analog video outputs.
Note:
• When this setting is set to On, video is output by the
analog video outputs only when the HD Resolution is
set to 480p/576p.
HD JPEG mode
If your TV is connected to the HDMI OUT and the
HDMI resolution is set to 720p or 1080i, this setting
allows you to display your JPEG pictures in high defini-
tion.
Progressive Setting
With this setting you can set the component video output
to progressive or interlaced. While the HDMI Output Set-
ting is set to On, this setting is fixed at Progressive and
On: JPEG pictures displayed in high definition.
Off: JPEG pictures displayed as normal.
Notes:
Interlaced: Component video output is interlaced.
• If your TV is connected to a video output other than
the HDMI OUT, or the HD Resolution set to some-
thing other than 720p or 1080i, even if this setting is
set to On, your JPEG pictures will not be displayed in
high definition.
Progressive: Component video output is progressive.
Note:
• This setting can also be changed by pressing and hold-
ing the Previous [
] button, and then pressing
[STANDBY/ON] button.
• When using HD JPEG, it may take a while to display
each picture. And the Zoom function cannot be used.
Also, onscreen status messages such as “Play” and
“Stop” are not displayed.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuring the DV-CP704—Continued
Video Black Level
Audio Menu
With this setting you can adjust the picture blackness of
analog video output.
Digital/HDMI Audio Out
Light: Blacks are lighter, and the entire picture
becomes lighter.
With this setting you can configure the optical, coaxial,
and HDMI digital outputs.
Dark: Blacks are darker, and the entire picture
All: Dolby Digital and DTS signals are output as
becomes darker.
they are.
PCM: Dolby Digital signals are down mixed to 2
channels and output as PCM.
Brightness
With this setting you can adjust the picture brightness.
Off: No digital signals are output.
Level 1-7: 1 is the darkest. 7 is the brightest. The
default brightness is 4 (standard).
Linear PCM Out
With this setting you can configure the DV-CP704 to
output digital audio with higher sampling rates (e.g.,
96 kHz) as it is or down sample it to 48 kHz.
If the AV component you connect to the DV-CP704’s
digital audio outputs supports 96 kHz digital audio,
select Down Sample Off. Otherwise, select Down Sam-
ple On.
Sharpness
With this setting you can adjust the picture sharpness.
Level 1-7: 1 is the softest. 7 is the sharpest. The
default sharpness is 4 (standard).
PAL Output Setting (Australian model only)
Down Sample On (default): 96 kHz digital audio is
down sampled and output at 48 kHz.
With this setting you can specify how the DV-CP704
outputs video signals when playing NTSC format
DVD-Video discs.
Down Sample Off: 96 kHz digital audio is output as
it is.
AUTO (default): Use this option to watch PAL and
NTSC format discs. The DV-CP704 does not convert
the video format. When you play a PAL disc, the
video output will be PAL format. And when you play
an NTSC disc, it’ll be NTSC format. Your TV must
support NTSC playback in order to watch NTSC for-
mat discs.
Notes:
• Some copy-protected DVD-Video discs may use
96 kHz digital audio only for A/D conversion to the
analog audio outputs.
• With some discs, even if you select Down Sample Off,
the digital audio will be down sampled to 48 kHz, and
in some cases may not be output by the DV-CP704’s
digital audio outputs.
NTSC: Use this option if you want to play only
NTSC format discs.
PAL: Use this option if your TV doesn’t support
NTSC playback, or the picture is distorted when
watching NTSC discs. The DV-CP704 will convert
NTSC format video signals to PAL-compatible for-
mat.
Dynamic Range Control (Dolby Digital
only)
With the Dynamic Range Control function you can
reduce the dynamic range of Dolby Digital material so
that you can still hear quiet parts even when listening at
low volume levels—ideal for watching movies late at
night when you don’t want to disturb anyone.
Notes:
• This setting can be changed only when playback is
stopped.
• This setting can also be changed by pressing and hold-
Off (default): The full dynamic range is preserved.
ing the Next
button, and then pressing
On: The dynamic range of Dolby Digital material is
[STANDBY/ON] button.
compressed.
Notes:
• The impact of the Dynamic Range Control function
depends on the Dolby Digital material that you are
playing and with some material there will be little or
no effect.
• When the DV-CP704 is set to Standby, this function is
automatically set to off.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuring the DV-CP704—Continued
• With some DVD-Video discs you can select subtitles
from a menu.
Language Menu
On-Screen Language
Display Menu
With this setting you can select a language for the
onscreen setup menus and messages.
Select one of the displayed language.
On-Screen Display
With this setting you can turn on or off onscreen mes-
sages, such as “Play,” “Stop,” and “Resume.”
Disc Menu Language
With this setting you can select your preferred language
for disc menus. When you play a DVD-Video disc with
multiple language disc menus, your preferred language
will be selected automatically.
Select “Others” if you can’t find your language dis-
Off: Onscreen messages are not displayed.
On (default): Onscreen messages are displayed.
On-Screen Display Color
With this setting you can set the color and theme of the
Disc navigation window.
Notes:
Sapphire (default):
Pearl:
• Not all DVD-Video discs have menus in multiple lan-
guages.
• Even if a DVD-Video disc has menus in multiple lan-
guages, this setting may not always work.
• If a DVD has only one menu language, that will be
used.
• With some DVD-Video discs you can select languages
from a menu.
Amethyst:
Garnet:
Background
With this setting you can select the color of the back-
ground that’s displayed when the DV-CP704 is stopped.
Audio Language
Blue:
Gray:
With this setting you can select your preferred language
for soundtracks. When you play a DVD-Video disc with
multiple language soundtracks, your preferred language
will be selected automatically.
Graphic (default): The theme picture specified for
the On-Screen Display Color setting is used.
Select “Others” if you can’t find your language dis-
Screen Saver
With the Screen Saver function you can protect your TV
against screen burn-in, which can occur when the same
image or menu is displayed for a long time.
Notes:
• Not all DVD-Video discs have soundtracks in multiple
languages.
Off: Screen saver off.
• Even if a DVD-Video disc has soundtracks in multiple
languages, this setting may not always work.
• If a DVD has only one soundtrack, that will be used.
• With some DVD-Video discs you can select languages
from a menu.
On (default): Screen saver on.
When the Screen Saver function is set to On, and
DVD-Video playback is stopped for 15 minutes, the
Screen Saver function automatically displays a moving
image.
Subtitle Language
Once the screen saver has been activated, you can cancel
it by pressing the Play [ ] button.
With this setting you can select your preferred language
for subtitles. When you play a DVD-Video disc with
multiple language subtitles, your preferred language will
be selected automatically.
Note:
• The Screen Saver function also works with audio CDs
and MP3/WMA discs.
Select “No Subtitle” if you don’t want subtitles dis-
played. Select “Others” if you can’t find your language.
Auto Power Off
The Auto power off function automatically turns off the
DV-CP704 after 20 minutes of inactivity.
Notes:
• Not all DVD-Video discs have subtitles.
• Even if a DVD-Video disc has subtitles in multiple
languages, this setting may not always work.
• If a DVD has only one subtitle language, that will be
used.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuring the DV-CP704—Continued
• Not all discs use parental lock. See the disc’s sleeve
notes for details.
Operating Setting Menu
• Discs with parental lock may cut certain scenes,
replace certain scenes with children-friendly scenes,
or prevent playback of the entire disc.
Parental Lock
With the Parental Lock function you can block access to
certain scenes that the authors have flagged as being
unsuitable for children.
Change the Security Code
To use parental lock, you must set a security code.
To change the Security Code, confirm your existing code
then enter a new one.
Select “Operation Setting” menu
in the setup.
1
Select “Operation Setting” menu
in the setup.
1
Use the Up/Down [ ]/[ ] buttons
to select “Parental Lock”, and
then press the [ENTER] button.
2
Use the Up/Down [ ]/[ ] buttons
to select “Security Code”, and
then press the [ENTER] button.
Remote controller
2
The security code input screen appears.
Remote controller
The security code input screen appears.
Enter the security code using the
remote controller’s number but-
3
Remote controller
Enter the existing security code
using the remote controller’s
3
tons, and then press the [ENTER]
button.
The default security code is “8888.”
You can change the security code in the
next step.
Remote controller
number buttons, and then press
the [ENTER] button.
The default security code is “8888.”
Even if a new security code has been
entered, the code “8888” can still be
used.
Once the security code has been
entered, the new security code input
screen appears.
Use the Up/Down [ ]/[ ] buttons
to change the level of parental
lock, and then press the [ENTER]
4
Enter the new security code
using the remote controller’s
Remote controller
4
Remote controller
button.
number buttons, and then press
the [ENTER] button.
The new security code has been set.
At level 8 parental lock is off, with level
1 being the strictest level.
Notes:
• When entering a security code, you can use the [CLR]
button to delete the numbers entered so far, if neces-
sary.
Note:
• If you forget your security code, enter “8888” instead.
“8888” is a security code that can always be used.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuring the DV-CP704—Continued
Language
Afrikaans
Amharic
Arabic
Assamese
Aymara
Azerbaijani
Bashkir
Byelorussian
Bulgarian
Bihari
Bislama
Bengali
Code
AF
AM
AR
AS
AY
AZ
BA
BE
BG
BH
BI
BN
BO
BR
CA
CO
CS
CY
DA
DZ
EO
ET
EU
FA
Language
Burmese
Nauru
Code
MY
NA
NE
NO
OC
OM
OR
PA
Initial Setup Menu
This menu appears automatically the very first time you
Nepali
Norwegian
Occitan
Oromo
Oriya
Panjabi
Polish
On-Screen Language—see page 46
PL
Pashto, Pushto
Quechua
Rhaeto-Romance
Kirundi
Romanian
Kinyarwanda
Sanskrit
Sindhi
Sangho
Serbo-Croatian
Sinhalese
Slovak
Slovenian
Samoan
Shona
PS
QU
RM
RN
RO
RW
SA
SD
SG
SH
SI
Tibetan
Breton
Catalan
Corsican
Czech
Selecting Other Languages
This section explains how to select other languages for
disc menus, audio, and subtitles.
Welsh
Danish
Select “Others” from the Disc
Menu Language, Audio Lan-
1
Bhutani
Esperanto
Estonian
Basque
Persian
Finnish
Fiji
Faroese
Frisian
Irish
Scots-Gaelic
Galician
Guarani
Gujarati
Hausa
Remote controller
SK
SL
guage, or Subtitle menu, and
then press [ENTER].
The language code boxes appear.
SM
SN
SO
SQ
SR
SS
ST
SU
SW
TA
TE
TG
TH
TI
TK
TL
TN
TO
TR
TS
TT
TW
UK
UR
UZ
VI
VO
WO
XH
YO
ZU
FI
FJ
Somali
Albanian
Serbian
Siswati
Sesotho
Sundanese
Swahili
Tamil
Telugu
Tajik
Thai
Tigrinya
Turkmen
Tagalog
Setswana
Tonga
Turkish
Tsonga
Tatar
Use the remote controller’s Left/
Right [ ]/[ ] buttons to select the
FO
FY
GA
GD
GL
GN
GU
HA
HI
HR
HU
HY
IA
IE
IK
IN
IS
IW
JI
JW
KA
KK
KL
KM
KN
KS
KU
2
Remote controller
code boxes.
Use the Up/Down [ ]/[ ] buttons
to enter a language code.
See adjacent table for language codes.
Hindi
When you’ve finished, press the
Remote controller [ENTER] button.
3
Croatian
Hungarian
Armenian
Interlingua
Interlingue
Inupiak
Indonesian
Icelandic
Hebrew
Yiddish
Javanese
Georgian
Kazakh
Greenlandic
Cambodian
Kannada
Kashmiri
Kurdish
Language Code List
Twi
Ukrainian
Urdu
Use this list when specifying other languages.
Language
Japanese
English
French
German
Italian
Code
JA
EN
FR
DE
IT
Language
Kirghiz
Latin
Code
KY
LA
LN
LO
LT
LV
MG
MI
MK
ML
MN
MO
MR
MS
MT
Uzbek
Vietnamese
Volapük
Wolof
Xhosa
Yoruba
Lingala
Laothian
Lithuanian
Latvian
Malagasy
Maori
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Spanish
Chinese
Dutch
Portuguese
Swedish
Russian
Korean
ES
ZH
NL
PT
SV
RU
KO
EL
Zulu
Greek
Afar
Abkhazian
AA
AB
Malay
Maltese
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Symptom
Possible cause
The power cord is not connected.
Remedy
Connect the power cord to a suitable wall outlet
Can’t turn
on the
DV-CP704?
Turn off the DV-CP704, wait five seconds, then try turning
External interference is affecting the DV-CP704’s dig- it on again. If that fails, disconnect the power cord from the
ital circuitry.
wall outlet, wait 10 seconds, reconnect it, then try turning it
on again.
On your TV, select the input to which the DV-CP704 is
The wrong input source is selected on your TV.
The video cable is not connected properly.
No HDMI Video Output?
The HDMI Output Setting is set to Off.
Try pressing the [RESOLUTION] button on the remote
controller repeatedly to switch the HDMI OUT on, and
then pressing the [RESOLUTION] button repeatedly to
Your TV doesn’t support HDMI Resolution settings of
720p and 1080i.
No Component Video Output?
Press and hold down the remote controller’s [RESOLU-
TION] button to turn off the HDMI OUT (page 39).
Make sure the PRGV indicator is not on.
Your TV does not support progressive scanning, and
the HDMI OUT is on.
Press and hold down the remote controller’s [RESOLU-
TION] button to turn off the HDMI OUT, and then set the
progressive Setting on the onscreen setup menus to Inter-
laced (page 39, 44). Make sure the PRGV indicator is not
on.
No picture?
While the HDMI OUT is on, the component video out-
put outputs progressive video.
Press the remote controller’s [RESOLUTION] button
Press and hold down the remote controller’s [RESOLU-
TION] button to turn off the HDMI OUT, and then set the
progressive Setting on the onscreen setup menus to Inter-
laced (page 39, 44). Make sure the PRGV indicator is not
on.
The HDMI Resolution is not set to 480p (480p/576p).
No S-Video or Composite Video Output?
Try pressing the [RESOLUTION] button on the remote
The HDMI Resolution is not set to 480p (480p/576p).
The wrong input source is selected on your hi-fi amp
or AV receiver.
On your hi-fi amp or AV receiver, select the input to
Check the audio cable and correct as necessary
The audio cable is not connected properly.
The hi-fi amp or AV receiver connected to the
DV-CP704’s audio outputs is not on.
Turn on the hi-fi amp or AV receiver.
Check the Digital/HDMIAudio Out setting and correct as
The Digital/HDMI Audio Out setting is incorrect.
No Sound from the HDMI OUT?
Change the Digital/HDMIAudio Out setting to eitherAll
The Digital/HDMI Audio Out setting is set to Off.
No sound?
You won’t hear any sound from the HDMI output if the
source component is only DVI/HDCP-Compatible
The DVD player is connected to the DVI jack on your
TV or AV receiver.
The HDMI setting on your TV or AV receiver is set to Change the HDMI setting on your TV or AV receiver to
DVI.
Change the Digital/HDMI Audio Out setting to PCM
Your TV or AV receiver doesn’t support Dolby Digital.
The DV-CP704 will not be able to play DTS format audio
or soundtracks. On your DVD-Video disc’s audio setup
menu, select an audio format other than DTS.
Your TV or AV receiver doesn’t support DTS.
Change the Linear PCM Out setting to Down Sample On
Your TV or AV receiver doesn’t support 96 kHz PCM.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting—Continued
Symptom
Possible cause
No Digital Audio Output?
The Digital/HDMI Audio Out setting is set to Change the Digital/HDMI Audio Out setting to
YourTV orAV receiver doesn’t support Dolby Change the Digital/HDMI Audio Out setting to
Remedy
Digital.
No sound?
The DV-CP704 will not be able to play DTS for-
mat audio or soundtracks. On your DVD-Video
disc’s audio setup menu, select an audio format
other than DTS.
Your TV or AV receiver doesn’t support DTS.
Your TV or AV receiver doesn’t support
96 kHz PCM.
Change the Linear PCM Out setting to Down Sam-
The disc is dirty.
The picture distorts
occasionally?
You’re using the Fast Forward or Fast Reverse A little picture distortion may occur when using
function.
these functions. This is normal.
The DV-CP704 is connected to your TV via a
VCR or other video equipment and its copy
protection system is affecting the picture.
Picture instability or
noise?
Connect the DV-CP704 directly to your TV
No discs loaded.
The selected disc cannot be played because
it’s incompatible.
The disc is upside down.
The disc is not centered in the disc bay.
The disc is dirty.
Load the disc the correct way up (page 23).
Can’t start playback?
The selected disc has parental lock and the
Parental Lock function is on.
Turn off the Parental Lock function (page 47).
The disc is not ISO9660 Level 2 format or
Joliet.
Use only ISO9660 Level 2 format or Joliet discs
Can’t play MP3/WMA/
JPEG discs?
The disc has not been finalized.
MP3 files without a “.mp3” or “.MP3” file-
name extension are not recognized.
Can’t select MP3 files?
Can’t play WMA files?
Use the correct filename extension (page 8).
WMA files without a “.wma” or “.WMA” file-
name extension are not recognized.
Use the correct filename extension (page 8).
Don’t use the copyright option (page 8).
Use the correct filename extension (page 8).
The WMA file’s copyright option is on.
JPEG files without a “.jpg” or “.JPG” filename
extension are not recognized.
Can’t view JPEG files?
Use JPEG files that are less than 5 megabytes
The JPEG file is too big.
The disc is dirty.
The message“BAD DISC”
appears on the display?
Turn off the DV-CP704, wait five seconds, then
turn it on again. If that doesn’t resolve the issue,
disconnect the power cord from the wall outlet,
wait five seconds, reconnect it, then try again.
Buttons on the
DV-CP704 and remote
controller don’t work?
Power supply voltage fluctuations and other
anomalies, such as static electricity, can inter-
fere with normal operation.
The batteries are flat.
Replace with new batteries (page 16).
Check the batteries and correct as necessary
The batteries are installed incorrectly.
You’re not pointing the remote controller at
the DV-CP704’s remote sensor.
Point the remote controller at the DV-CP704’s
Buttons on the
Use the remote controller closer to the DV-CP704
(page 16). The remote controller has a range of
approximately 16 ft. (5 meters).
DV-CP704 work OK but
those on the remote con-
troller don’t?
You’re too far away from the DV-CP704.
Make sure that the DV-CP704 is not subjected to
direct sunshine or inverter-type fluorescent lights.
Relocate if necessary.
A strong light source is interfering with the
DV-CP704’s remote sensor.
If the DV-CP704 is installed in a cabinet with
colored glass doors, the remote controller may
not work reliably when the doors are closed.
Open the doors, or use a cabinet without colored
glass.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting—Continued
■ Abnormal Behavior
The DV-CP704 contains a microcomputer for signal processing and control functions. In very rare situations, severe
interference, noise from an external source, or static electricity may cause it to lockup. In the unlikely even that this
should happen, unplug the power cord from the wall outlet, wait at least five seconds, and then plug it back in again.
Alternatively, press and hold the Stop [ ] button until “RESET” appears on the display (about 10 seconds).
■ Restoring the Default Settings
To reset the DV-CP704 to its factory defaults, turn it on, and when “ONKYO DVD” has disappeared from the display,
while holding down the Stop [ ] button, press the [STANDBY/ON] button. “INITIALIZE” appears on the display.
When the reset is complete, “COMPLETE” is displayed, and the DV-CP704 enters Standby mode.
■ HDMI Status Mode
If you’re using an HDMI connection and there’s no picture or sound, you can check the status of the HDMI connection
by pressing and holding down the DV-CP704’s [DISPLAY] button for 10 seconds until a message ID appears on the
display. Look up the message ID in the following tables and check the HDMI connections and settings on both the
DV-CP704 and the connected component.
HDMI connection and HDMI-related settings status
Displayed ID
Message
Turn the DV-CP704 and the connected component off, then turn them on again. Make sure that the
connected component is working properly and that the DV-CP704’s HDMI settings are configured
suitably for that component.
MSG ID 001
MSG ID 015
No picture from the HDMI connection
Displayed ID
Message
MSG ID 002
The HDMI Output Setting is set to Off. Change it to On (page 44).
MSG ID 003
MSG ID 004
The HDMI cable may not be connected properly. Check the connection. Also, make sure the HDMI
input on the TV or AV receiver is correctly configured to received HDMI.
Make sure the HDMI input on the TV or AV receiver is correctly configured to received HDMI.
The connected component may not support HDCP. Make sure the connected component supports
HDCP.
Turn the DV-CP704 and the connected component off, then turn them on again.
The DV-CP704 may be connected to the other component’s DVI jack. Some TVs may not properly
receive the video output by the DV-CP704. Also, with a DVI connection, there will be no sound.
MSG ID 005
MSG ID 006
MSG ID 007
The DV-CP704’s HD Resolution setting is set to 720p or 1080i. If your TV doesn’t support these
resolutions, select another resolution (page 39).
MSG ID 008
MSG ID 009
The connected component may not be receiving the HDMI signal properly.
No sound from the HDMI connection
Displayed ID
Message
The DV-CP704’s Digital/HDMI Audio Out setting is set to Off. Change the setting to All or PCM
MSG ID 010
MSG ID 011
MSG ID 014
The connected component may not support 96 kHz PCM. Set the DV-CP704’s Linear PCM Out
setting to Down Sample On (page 45).
MSG ID 012
MSG ID 013
The connected component may not support Dolby Digital. Set the DV-CP704’s Digital/HDMI Audio
The connected component may not support DTS.
The DV-CP704 cannot play the DTS format audio or soundtrack. On your DVD-Video disc’s audio
setup menu, select an audio format other than DTS.
MSG ID 016
MSG ID 017
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Standard NTSC (U.S. model), PAL/AUTO (Australian
model)
Signal system
4 Hz–22 kHz @ 48 kHz sampling rate
4 Hz–44 kHz @ 96 kHz sampling rate
DVD linear audio
CD audio
Frequency
response
4 Hz–20 kHz (44.1 kHz)
95 dB
Signal-to-noise ratio
Audio dynamic range
Total harmonic distortion
Wow and flutter
95 dB
0.007% (1 kHz)
Below threshold of measurability
5° to 35° C (41° F to 95° F)
Install horizontally
Temperature
Operating
conditions
Installation
Y: 1.0 V (p–p), 75 Ω, negative sync, RCA/phono x3
PB/PR: 0.7 V (p–p), 75 Ω
COMPONENT VIDEO
Video outputs
Y: 0.7 V (p–p), 75 Ω, negative sync, 4-pin mini DIN x1
C: 0.286 V (p–p), 75 Ω
S VIDEO (S-Video)
VIDEO (composite video)
OPTICAL
1.0 V (p–p), 75 Ω, negative sync, RCA/phono x1
–22.5 dBm, optical connector x1
0.5 V (p–p), 75 Ω, RCA/phono x1
2.0 V (rms), 540 Ω, RCA/phono x2
19 pin connector
Audio outputs COAXIAL
ANALOG
HDMI output
120 V AC, 60 Hz (U.S. model)
100–240 V AC, 50/60 Hz (Australian model)
Power supply
Power consumption
13 W
General
0.35 W (U.S. model)
0.35 W (Australian model)
Power consumption in Standby mode
Weight
5.5 kg (12.1 lbs.)
Dimensions (W x H x D)
435 X 91 X 432 mm (17-1/8 X 3-9/16 X 17 ins.)
Audio CD, DVD-Video, MP3, WMA, JPEG, CD-R/RW,
DVD-R/RW (Video Mode), DVD+R/RW (Video Mode).
Discs that have not been property finalized may only be
partially playable or not playable at all.
Disc compatibility
Specifications and features subject to change without notice.
Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN
Tel: 072-831-8023 Fax: 072-831-8124
ONKYO U.S.A. CORPORATION
18 Park Way, Upper Saddle River, N.J. 07458, U.S.A.
ONKYO EUROPE ELECTRONICS GmbH
Liegnitzerstrasse 6, 82194 Groebenzell, GERMANY
ONKYO EUROPE UK Office
Suite 1, Gregories Court, Gregories Road, Beaconsfield, Buckinghamshire, HP9 1HQ
UNITED KINGDOM Tel: +44-(0)1494-681515 Fax: +44(0)-1494-680452
HOMEPAGE
ONKYO CHINA LIMITED
Unit 1&12, 9/F, Ever Gain PlazaTower 1, 88, Container Port Road, Kwai Chung,
N.T., HONG KONG Tel: 852-2429-3118 Fax: 852-2428-9039
I0607-1
SN 29344218
(C) Copyright 2006 ONKYO CORPORATION Japan. All rights reserved.
* 2 9 3 4 4 2 1 8 *
Download from Www.Somanuals.com. All Manuals Search And Download.
|