Names and functions
of parts ..................................7
C-N7050
Basic operation....................11
Listening to CDs ..................13
Network CD Player
Instruction Manual
Listening to files on a USB
flash drive, iPod/iPhone.......14
Memory playback/random
playback/repeat playback....16
Using network services .......18
Settings ...............................23
Other operations..................26
En
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
CAUTION
Do not expose this apparatus to drips or splashes.
Do not place any objects filled with liquids, such as vases,
on the apparatus.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
Do not install this apparatus in a confined space such as
a book case or similar unit.
7) Do not block any ventilation openings. Install in accordance
with the manufacturer's instructions.
The apparatus should be located close enough to the AC
outlet so that you can easily reach the power cord plug at
any time.
8) Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers)
that produce heat.
If the product uses batteries (including a battery pack
or installed batteries), they should not be exposed to
sunshine, fire or excessive heat.
9) Do not defeat the safety purpose of the polarized or
grounding- type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or
the third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
CAUTION for products that use replaceable lithium
batteries: there is danger of explosion if a battery is
replaced with an incorrect type of battery. Replace only
with the same or equivalent type.
10) Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
WARNING
11) Only use attachments/accessories specified by the
manufacturer.
Products with Class I construction are equipped with a
power supply cord that has a grounding plug. The cord of
such a product must be plugged into an AC outlet that has a
protective grounding connection.
12) Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination
to avoid injury from tip-over.
Precautions concerning batteries
13) Unplug this apparatus during lightning
storms or when unused for long
periods of time.
Misuse of batteries could cause them to rupture or leak leading
to fire, injury or the staining of nearby things. Please read and
observe the following precautions carefully.
14) Refer all servicing to qualified service
personnel. Servicing is required when
Be sure to insert the batteries with correct positive (+) and
negative (-) orientations.
the apparatus has been damaged
in any way, such as power-supply
cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
Use batteries of the same type. Never use different types of
batteries together.
If the remote control is not used for a long time (more than a
month), remove the batteries to prevent them from leaking.
The apparatus draws nominal non-operating power from the
AC outlet with its POWER or ON/STANDBY switch not in the
ON position.
If the batteries leak, wipe away the leakage inside the battery
compartment and replace the batteries with new ones.
Do not use batteries of types other than those specified. Do
not mix new batteries with old ones or use different types of
batteries together.
The mains plug is used as the disconnect device, the
disconnect device shall remain readily operable.
Do not heat or disassemble batteries. Never throw batteries
into fire or water.
Do not carry or store batteries with other metallic objects. The
batteries could short circuit, leak or explode.
Never recharge a battery unless it is confirmed to be
arechargeable type.
Download from Www.Somanuals.com. All Manuals Search And Download.
3
IMPORTANT SAFETY INSTRUCTIONS (continued)
Model for USA
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL
CAUTION
Changes or modifications to this equipment not expressly
approved by Onkyo CORPORATION for compliance will void
the user’s warranty.
The lightning flash with arrowhead in an
equilateral triangle is intended to alert the user
to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that
could be of sufficient magnitude to constitute a
risk of electric shock to persons.
This equipment has been teste d and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
The exclamation point in an equilateral triangle
is intended to alert the user to the presence
of important operating and maintenance
(servicing) instructions in the literature
accompanying the appliance.
Reorient or relocate the equipment and/or the receiving
antenna.
WARNING: TO PREVENT FIRE OR
SHOCK HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician
for help.
CAUTION
DO NOT REMOVE EXTERNAL CASES OR CABINETS TO
EXPOSE THE ELECTRONICS. NO USER SERVICEABLE
PARTS ARE INSIDE.
Model for Canada
Industry Canada’s Compliance Statement:
IF YOU ARE EXPERIENCING PROBLEMS WITH THIS
PRODUCT, CONTACT THE STORE WHERE YOU
This Class B digital apparatus complies with Canadian ICES-
003.
PURCHASED THE UNIT FOR A SERVICE REFERRAL. DO
NOT USE THE PRODUCT UNTIL IT HAS BEEN REPAIRED.
USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN COULD RESULT IN HAZARDOUS
RADIATION EXPOSURE.
IN USA/CANADA, USE ONLY ON 120 V SUPPLY
Download from Www.Somanuals.com. All Manuals Search And Download.
4
PRECAUTIONS
This unit contains a semiconductor laser system and is classified
as a “CLASS 1 LASER PRODUCT”. So, to use this model
properly, read this Instruction Manual carefully. In case of any
trouble, please contact the store where you purchased the unit.
To prevent being exposed to the laser beam, do not try to open
the enclosure.
CAUTION:
CLASS 1M VISIBLE AND INVISIBLE LASER RADIATION
WHEN OPEN. DO NOT VIEW DIRECTLY WITH OPTICAL
INSTRUMENTS. THIS PRODUCT UTILIZES A LASER. USE
OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIATION EXPOSURE.
The label on the right is
applied on the rear panel.
1. This unit is a CLASS 1 LASER PRODUCT and employs a laser
inside the cabinet.
2. To prevent the laser from being exposed, do not remove the
cover. Refer servicing to qualified personnel.
For European Models
Declaration of Conformity
We declare, under our soleresponsibility,
that this product complies with the standards:
–Safety
–Limits and methods of measurement of
radio disturbance characteristics
–Limits for harmonic current emissions
–Limitation of voltage changes, voltage fluctuations and flicker
–RoHS Directive, 2011/65/EU
WEEE
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Before use
What’s in the box
Precautions for use
RCA audio cable × 1
RI cable × 1
Remote control (RC-887C) x 1
Batteries for remote control (AAA) × 2
Do not install this unit in a location that could become
hot. This includes places that are exposed to direct
sunlight or near a radiator, heater, stove or other
heating equipment. Moreover, do not place it on top of
an amplifier or other equipment that generates heat.
Doing so could cause discoloration or deformation.
Avoid locations that are extremely cold or exposed to
excessive humidity or dust.
In order to enable good heat dissipation, leave at
least 20 cm (8") between this unit and walls and other
equipment when installing it. If you put it in a rack,
take precautions to prevent overheating by leaving at
least 5 cm (2“) open above the top of the unit and at
least 10 cm (4“) open behind the unit.
Using the remote control
Remove the cover from the back of the remote control
and insert two AAA batteries with their +/- ends oriented
in the case as shown. Replace the cover.
Do not put cloth on top of the unit or place the unit on
top of bedding or thick carpet. Doing so could cause
the unit to overheat or damage it.
Do not lift or move the unit during playback because
the disc rotates at high speed. Doing so could
damage the disc.
Always remove any loaded disc before moving this
unit or packing it for installation in a different location,
for example. Moving the unit with a disc inside could
cause a malfunction.
If the operation range of the remote control decreases,
the batteries have become exhausted. In this case,
replace the batteries with new ones. Dispose of the
used batteries according to the instructions on them or
requirements set by your local municipality.
This unit consumes power when in standby mode.
Supply voltage to the unit that matches the voltage
indicated on the rear panel. If you are in any doubt
regarding this matter, consult an electrician.
Do not open the body of the unit as this might result
in damage to the circuitry or cause electric shock. If
a foreign object should get into the unit, contact your
dealer.
Remote Control
Sensor
When removing the power plug from an outlet, always
pull directly on the plug. Never pull on the cord itself.
If a TV is turned on while the unit is on, static
Approx
16ft (5m)
might appear on the TV screen depending on the
characteristics of the TV broadcast signal. This is not
a malfunction of the unit nor of the TV. If this occurs,
turn the unit off.
When using the remote control, point it toward the
remote control signal receiver on the main unit from a
distance of 5 m (16 ft) or less.
Maintenance
Do not place obstructions between the main unit and
the remote control.
Wipe dirt from the top cover and other panel surfaces
using a soft cloth that has been slightly dampened with a
diluted neutral cleanser.
Do not use chemically-treated wipes, thinner or similar
substances because they could damage the surface of
the unit.
The remote control might not work if the remote
control signal receiver on the unit is exposed to direct
sunlight or bright light. If this occurs, try moving the
unit.
Beware that use of this remote control could cause
the unintentional operation of other devices that can
be controlled by infrared rays.
For safety, disconnect the power cord from the
socket before cleaning.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Names and functions of parts
Front
ON/STANDBY button
Preset (PRESET) button
1
G
Press this button to turn the unit on or put it in
standby mode.
You can store specific vTuner Internet Radio
programs as favorites for easy playback.
When this unit is in standby mode, it consumes a
Storing to the PRESET button
1. Play the radio station to add.
2. Press and hold one of the PRESET buttons 1 to 3.
slight amount of power.
For this reason, we use the term “standby” rather
than “off”.
"Preset OK" will appear when the radio station has
been stored successfully.
Disc tray
2
3
Tray open/close ( ) button
Press to open and close the disc tray.
Display
The stored station will be overwritten each time
another station is stored.
4
5
If no radio program is playing, pressing the
PRESET button does not store a radio station,
showing "Preset Failed".
CD playback/pause (
Press to start CD playback when it is stopped or
) button
CD
/
paused. During CD playback, press to pause.
The source switches to CD.
FRONT USB playback/pause (
button
Press to start USB playback when it is stopped or
paused.
Stop ( ) button
Press to stop playback.
Input (INPUT) button
Use this button to select the source.
RETURN button
H
I
J
)
6
FRONT USB
/
During USB playback, press to pause.
The source switches to USB.
NET button
When a menu is open, press to return to the previous
menu.
7
8
MENU/ENTER (MENU/ENTER) (
/
) dial
K
Press to open the network service menu.
Turn clockwise to skip to later tracks or
counterclockwise to skip to earlier tracks.
Press to use as the ENTER button to confirm settings.
Press and hold to use as the MENU button.
Turn to change the item or setting value shown when
a menu screen is open.
The source switches to NET.
USB port
Use to connect an iPod, iPhone or USB flash drive to
the unit.
When changing the input source, this port is
identified as “USB(F)”.
Do not connect computers to this unit's USB ports.
Audio from computers cannot be input through this
unit's USB ports.
Display (DISPLAY) button
9
F
Changes the information shown.
Remote control signal receiver
When using the remote control, point it toward this
receiver.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Names and functions of parts
Rear
Analog audio output (LINE OUT) jacks
These output analog audio signals.
Use the included RCA audio cable to connect this
unit’s output jacks to the audio input jacks of an
amplifier.
Connect the white plug of the audio cable to the white
(L) jack and the red plug to the red (R) jack.
Digital audio output (DIGITAL OUT) connectors
These output digital audio. Connect one of this
unit’s digital audio output connectors (COAXIAL or
OPTICAL) to the digital audio input connector of a
digital recording device such as an amplifier.
COAXIAL: Coaxial digital cable
RI REMOTE CONTROL jack
1
2
3
4
When connecting the unit to the RI jack of an Onkyo
amplifier or receiver using the included RI cable, you
can control the unit using the remote control of the
amplifier or receiver.
For information on the controllable functions, refer
to each device's instruction manual.
When there are two RI jacks, both jacks work in the
same way.You can connect the unit to either one of
them.
To enable the operation, you must connect the RI
cable and RCA audio cable correctly.
OPTICAL: Optical digital cable
ETHERNET port
Use a commercially-available LAN cable to connect
this port to a wired network or Internet connection.
When changing the input source, this port is
identified as “NET”.
L
L
Onkyo amplifier, etc.
CD
USB port
5
6
Use to connect a USB flash drive to the unit.
When changing the input source, this port is
identified as “USB(R)”.
An iPod/iPhone cannot be connected here.
Power cord
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Names and functions of parts
Remote control
On / Stand by (
) button
1
Press this button to turn the unit on or put it in
standby mode.
DIMMER button
2
3
Switches the brightness of the display.
INPUT SELECTOR buttons
Use these buttons to select the source.
After selecting USB, press the USB button to
switch between USB (F) and USB (R).
Pause ( ) button
4
During playback, press to pause.
When paused, press to resume playback.
Playback ( ) button
5
6
Press to start playback when it is stopped or paused.
Skip (
/
) / Search (
/
) button
Use to skip to the previous or next track.
Use also when selecting folders and files.
Press and hold to search backward/forward.
This unit does not have the (
) and
(
) functions
Stop ( ) button
Press to stop playback.
ENTER button
Use to confirm menu selections and setting values.
7
8
9
F
G
H
I
Direction (
/
/
/
) buttons
Use in menus and to change selected items.
MENU button
Press to open the menu screen.
RANDOM button
Use to change the random play/back setting.
MEMORY button
Use to set memory playback.
Number buttons
Use these to input track, file and folder numbers.
Alphanumeric characters, ". (period)", "/ (slash)", and
"
" are not used in this model.
Tray open/close ( ) button
Press to open and close the disc tray.
DISPLAY button
Change the information shown.
RETURN button
J
K
L
When a menu is open, press to return to the previous
menu.
REPEAT button
Use to change the repeat playback setting.
CLEAR button
M
N
Use when setting memory playback.
When both the main unit and the remote
control have buttons with the same functions,
the instructions in this manual refer only to
one, but the other can be used in the same
way.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Names and functions of parts
Display
Auto Standby (ASb) indicator
This indicator appears when the Auto Standby
function is on.
1
: Folder*
: Track/Broadcast station name
: Playing back*
Format indicators
2
When the source is set to USB or NET and a DSD or
AAC audio file is playing, the DSD or AAC indicator
appears according to the file format.
FILE indicator
When the source is set to CD and a disc containing
audio files is loaded, this indicator appears. The file
number is shown beneath the indicator.
TRACK indicator
: Paused*
3
4
: Searching forward*
: Searching backward*
: Artist name
When the source is set to CD and an audio CD is
loaded, this indicator appears. The track number is
shown beneath the indicator.
: Album name
Play/pause (
TOTAL REMAIN indicator
/
) indicator
: Repeat mode
5
6
: Repeat one track
When the source is set to CD, this indicator shows
what information about the disc is being displayed.
TOTAL: Total disc playback time
REMAIN: Remaining playback time of track being
played
: Folder repea*
: Random
TOTAL REMAIN: Remaining playback time of disc
being played
: Random repeat**
FOLDER indicator
7
8
: Memory**
When the source is set to CD and a disc containing
audio files is loaded, this indicator appears. The
number of folders is shown beneath the indicator.
Message display area
Track information and menus appear here.
The following icons appear in the message display
area.
: Memory repeat**
*Does not appear when the source is CD.
**This only appears when the source is CD.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Basic operation
In this section, we explain operations that are the same
in every mode.
Starting playback
To play a CD: Press the CD play/pause (
During playback, " " appears on the display.
) button.
/
1. Press the ON/STANDBY button to turn the unit on.
To play an USB connected device: Press the USB play/
pause (
) button. During playback, " " appears on
/
the display.
Pausing playback
To pause a CD: Press the CD play/pause (
) button.
/
To resume playback from the position where it was
paused, press the CD play/pause ( ) button again.
/
During pause, "
To pause an USB connected device: Press the USB play/
pause ( ) button.
" appears on the display.
/
2. Press the INPUT button to change the source.
Each time you press the INPUT button, the source
changes as shown below.
To resume playback from the position where it was
paused, press the USB play/pause ( ) button again.
/
During pause, "
" appears on the display.
CD
USB(F)
USB(R)
NET
Stopping playback
When using the remote control to change the source,
press the button for the source that you want to use
(CD, NET or USB).
Press the stop ( )button to stop playback.
Skipping to search for a track
Turn the main unit MENU/ENTER dial to skip to tracks
before or after the current track. Keep turning until the
desired track is selected.
3. Start source playback.
When using the remote control, use the skip
(
/
) buttons. Use to skip to the previous or next
track. Keep pressing until the desired track is selected.
During playback, press the
button once to return
to the beginning of the current track. To return to the
beginning of the previous track, keep pressing the
button.
During memory playback, tracks from earlier or later
in the program will be played back.
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Basic operation
Searching for part of a track
During MP3/WAV disc playback
Various file information, including the title, artist and
album ID3 tag information for the MP3/WAV file playing
back is shown.
During playback, press a remote control search
(
/
) button to search backward/forward. Release the
button when you find the desired part.
Playback resumes from that point.
Elapsed time of current track -> File name -> Folder
name -> Title (if file has ID3 tag) -> Artist (if file has ID3
tag) -> Album (if file has ID3 tag) -> Sampling rate and
bit rate
Playback order of audio files
Discs with audio files store them in folders in the same
way that files are ordinarily managed on a computer.
Moreover, some store multiple folders in one folder.
If the file currently playing back exceeds 99 minutes
and 59 seconds, “– –:– –” is shown.
Characters in track and folder names that cannot be
shown are indicated with asterisks (*). The unit can
also be set to show the file or folder number when
characters that cannot be shown are included. See
"BAD NAME" under "Settings".
WAV files do not have ID3 tags, so their titles and
other information are not shown.
Example of folder numbers and file playback order (1-
9) for a disc containing audio files during normal
playback.
001 (ROOT)
MP3/WMA file
MP3/WMA file
During USB/NET playback
Various file information, including the title, artist and
album ID3 tag information for the audio file playing back
is shown.
002 folder
MP3/WMA file
MP3/WMA file
Title (if file has ID3 tag) -> Artist (if file has ID3 tag) ->
Album (if file has ID3 tag) -> Elapsed time of current
track -> Playback time of current track -> File format,
sampling rate and bit rate
004 folder
MP3/WMA file
002 folder
MP3/WMA file
MP3/WMA file
Dimmer
Press the remote control DIMMER button to cycle
through display and indicator brightness levels.
Folder
005 folder
Ordinary
Dim Dark
MP3/WMA file
MP3/WMA file
Auto Standby function
The order in the illustration above might change if files
or folders are added, deleted or moved.
When the Auto Standby function is On, the unit will
automatically enter standby mode if there is no audio
input and this unit is not operated for 20 minutes. When
the Auto Standby function is enabled, the ASb indicator
appears on the display.
Information shown on the display (CD/USB/NET)
Press the DISPLAY button during audio file playback to
change the information shown on the display.
Press the ON/STANDBY button to exit standby mode.
During audio CD playback
Information about the disc playing back is shown.
Elapsed time of current track -> REMAIN (remaining
time of track being played) -> TOTAL REMAIN
(remaining time of disk being played)
If the random playback or total playback time exceeds
99 minutes and 59 seconds, “– –:– –” is shown.
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Listening to CDs
This unit can play the following types of discs and files.
Discs: CD-DA, CD-R, CD-RW
Selecting tracks on MP3/WAV discs
Files: MP3, WAV
Navigation mode
1. Press the INPUT button to change the source to CD.
When using the remote control, press the CD button.
2. Press the tray open/close ( ) button.
3. Place a disc on the tray with the labeled side up.
4. Press the tray open/close ( ) button to close it.
You can select files and folders using the folder hierarchy.
1. When stopped, press the stop ( ) button.
“Root” appears on the display and navigation mode is
activated.
Pressing the stop ( ) button when "STOP KEY" is
set to "Navigation" activates navigation mode.
2. Press the play ( ) button.
Example: Audio CD loaded
The name of the first folder inside the Root directory
appears.
If there are no folders, the name of the first file
appears.
3. Use the skip (
/
) buttons to select folders and
files on the same level.
Total number Total playback
of tracks
time
To select files and subfolders inside another folder,
after selecting that folder, press the play ( ) button.
Example: MP3/WAV disc loaded
Use the skip (
/
) buttons to select subfolders
and files inside that folder.
To move up one level, press the pause ( ) button.
4. After selecting the desired file, press the ENTER
button or play ( ) button.
Total number Total number
of folders
of files
“No Disc” appears if no disc has been loaded.
5. Press the play/pause (
/
) button.
Playback starts from the first track.
Direct playback using track numbers
In addition to using the skip (
/
) buttons to select
tracks, you can input a track by number and start
playback.
This starts playback of that file.
During playback or when stopped, you can use the
remote control number buttons to select a track by
number.
For a single-digit number, press the corresponding
number button. For a double-digit number, press the
10 button followed by the number button for the tens
digit. Then, press the number button for the ones digit.
Playback starts after the track number is input.
All folder mode
You can also select folders and files in this mode, but all
folders are treated equally regardless of position in the
folder structure. Use the remote control.
1. When stopped, press the pause ( ) button.
“1” appears on the display and all folder mode is
activated.
Example: entering track number 7
Press [7].
Pressing the stop ( ) button when "STOP KEY" is
set to "All Folder" activates "all folder" mode.
Example: entering track number 23
Press [>10], [2] and [3].
2. Use the skip (
/
) buttons to select a folder, and
press the ENTER button or play ( )button to enter
that folder.
3. Use the skip (
/
) buttons to select a file.
4. After selecting the desired file, press the ENTER
button or play ( ) button.
This starts playback of that file.
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Listening to files on a USB flash drive, iPod/iPhone
The name of the track or folder appears.
Listening to files on a USB flash
drive
Using the remote control, you can also press the
MENU/ENTER button.
4. Turn the MENU/ENTER dial to select a track and
press the play/pause ( ) button.
/
This starts playback of the selected track.
Using the remote control, you can select tracks
with the direction ( / ) buttons and then press the
play ( ) button.
When a folder is selected, the first track in that
folder will start playing back.
You can also select a folder and then press the
MENU/ENTER dial to select tracks inside that
folder.
When playing audio files from a USB flash drive, unless
using repeat playback set to Repeat All, only the audio
files in the same level of a single folder will be played
back.
1. Press the main unit INPUT button to change the
source to "USB(F)" or "USB(R)"
When using the remote control, press the USB button.
“No storage” will appear when nothing is connected.
2. Connect a USB flash drive to the selected USB port.
When a USB flash drive is detected, its volume label
will be displayed.
In this state, you can press the play/pause (
/
)
button to start playing in order the tracks in the first
folder that contains audio files on the USB flash
drive.
3. Press the MENU/ENTER dial.
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Listening to files on a USB flash drive, iPod/iPhone
Listening to an iPod/iPhone
The following explanations refer to an iPod, but they also
apply to use with an iPhone.
1. Press the main unit INPUT button to change the
source to "USB(F)"
When using the remote control, press the USB button.
“No storage” will appear when no iPod is connected.
2. Connect the USB port on the front of the main unit to
your iPod using its accessory USB cable.
Connect an iPod to the iPod/iPhone USB
connector on the front of the unit.
3. Operate the iPod to start playback.
“USB(iPod)” appears on the display. No information
about the content is shown.
If an iPod is connected to this unit, it will only be
recharged when this unit is ON. Recharging will
stop when the iPod is fully recharged. Recharging
is not possible when this unit is in standby.
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Memory playback/random playback/repeat playback
Memory playback (CD)
Checking the program content
When stopped, use the search (
showtrack numbers and playback times.
/
) buttons to
This unit can store up to 25 tracks in the memory. Use
the remote control.
Stop the unit before proceeding with the steps.
Clearing tracks from the program
1. Press the remote control MEMORY button.
When stopped, press the CLEAR button to remove the
last track that was added to the program.
Example: Audio CD loaded
Adding tracks to the end of the program
When stopped, use the skip (
/
) buttons to show
the track that you want to add and press the play (
button to add it to the end of the program.
)
Example: MP3/WAV disc loaded
Ending memory playback
Press the stop ( ) button to stop playback, and then
press the MEMORY button.
2. Add tracks to the memory.
Memory playback will also end if you press the tray
open/close ( ) button to open the tray or press the
ON/STANDBY button to put the unit into standby.
Example: Audio CD
Use the skip (
/
) buttons to select a track to store.
Random playback (CD/USB)
Use this function to play back tracks in random order.
Press the RANDOM button to turn random playback on/
off.
When using an audio CD, you can also select tracks
using the number buttons (“Direct playback using track
numbers”).
Press the play( )button to add the track to the program.
Repeat these procedures to add other tracks as needed.
Example: MP3/WAV disc
Follow the procedures in "Selecting tracks on MP3/WAV
discs".
When using an audio CD or MP3/WAV disc
You can reorder the tracks randomly and play them all
once. Stop the unit before setting this mode.
Folder number
File number
Program number
Press the RANDOM button to enter the random playback
3. Press the play( )button to start playback.
mode. The
will appear.
If you press the RANDOM button during playback,
the current playback mode (either “Normal Play” or
“Random Play”) will appear, but the playback mode
cannot be changed.
Skipping to search for a track
Press the skip (
/
) buttons to play tracks from
earlier or later in the program. Keep pressing until the
desired track is selected.
Random playback will be canceled in the following cases.
During playback, press skip ( ) button once to
return to the beginning of the current track. To return
to the beginning of an earlier track, keep pressing skip
When the unit is put into standby
If the disc tray is opened
(
) button.
Download from Www.Somanuals.com. All Manuals Search And Download.
16
Memory playback/random playback/repeat playback
When using a USB flash drive
Plays back audio files in the folder repeatedly in random
order. When you press the RANDOM button to enter the
random playback mode,
the display.
will appear on the left side of
Random playback will be canceled in the following cases.
When Net Standby is set to Disable and the power is
in standby mode
When repeat playback is used
Repeat playback (CD/USB)
Press the REPEAT button to cycle through repeat modes
as follows.
When using an audio CD or MP3/WAV disc
Each time you press the REPEAT button, the icon shown
on the left side of the display will change as follows.
Repeat playback and random playback can be used
together.
(Repeat All)
(Repeat 1)
(Repeat Off)
Repeat playback will be canceled in the following cases.
When the unit is put into standby
If the disc tray is opened
When using a USB flash drive
Each time you press the REPEAT button, the icon shown
on the left side of the display will change as follows.
(Repeat All)
(Repeat 1)
(Folder
Repeat) (Repeat Off)
Repeat playback will be canceled in the following cases.
When random playback is used (when random
playback mode ends, the set repeat playback mode
will become active again).
Download from Www.Somanuals.com. All Manuals Search And Download.
17
Using network services
Store favorite vTuner Internet Radio programs
vTuner Internet Radio
You can store specific vTuner Internet Radio programs as
favorites to make accessing them easier. There are two
ways to do this.
vTuner Internet Radio is a portal site for Internet
radio stations around the world.You can search for
radio stations by musical genre, country and other
classifications.
vTuner Internet Radio has been added to this unit in
advance.
Add it to My Favorites
1
Press the NET button to open the network service menu
and use the “My Favorites” item to add a favorite program
to it.
1. After selecting the radio station to add, press and hold
the remote control MENU button.
An Internet connection is necessary to listen to vTuner
Internet Radio.
You can add a radio station even while it is playing
1. Press the NET button to open the network service
menu.
back.
2. Use the direction ( / ) buttons to select “My
Favorites” and press the ENTER button.
Network service menu
Press the NET button and press the direction
3. To add the radio station without changing its name,
use the direction ( / / / ) buttons to select “OK” and
press the ENTER button. To add the radio station after
changing its name, after using the direction ( / / / )
buttons to input the characters, select “OK” and press
the ENTER button.
(
/
/ / ) buttons to select the menu as follows.
vTuner Internet Radio -> My Favorites -> DLNA ->
Home Media
2. Use the direction ( / / / ) buttons to select “vTuner
Internet Radio” and press the ENTER button.
An error message will appear if the service is not on
the air.
Inputting characters: See "Inputting characters" in
"Other operations".
3. Use the direction ( / ) buttons to select a station and
press the ENTER button.
Assigning to the PRESET buttons
Long pressing one of the PRESET 1 to 3 buttons
while you are playing back an Internet radio station,
allows you to set it to the PRESET button.
Playback will start.
Add a station to My Favorite Groups in
2
vTuner Internet Radio
Select vTuner Internet Radio and press the ENTER
button to see the “My Favorite Groups” folder on the
same screen that shows genres and locations.You can
add Internet radio stations that you like to this folder.
Before starting the procedure
This procedure requires a computer.
To see similar stations, press and hold the remote
control MENU button, use the direction (
/
)
buttons to select “Stations like this” and press the
ENTER button.
Download from Www.Somanuals.com. All Manuals Search And Download.
18
Using network services
Registering as a user
Adding a program
1. Open a web browser on a computer connected to the
same network as this unit and access the following
2. Click the flag for the desired language at the top left of
the vTuner home screen.
Before starting the procedure
This procedure requires a computer.
You have to connect your computer and this unit to
the same network to make My Favorites settings.
3. When the screen is displayed in the desired language,
input the ID of this unit in the ID input field.
You will need the name and URL of the radio
station to add during the storing procedure, so
check them in advance.
To check the ID of this unit, press the remote control
NET button, press the direction ( / ) buttons to select
"vTuner Internet Radio" and press the ENTER button.
Press the direction ( / ) buttons to display "ID#". The
12 alpha numerical characters after the "ID#" are the
ID of this unit. Write it down.
1. Press the MENU button.
4. Click "Create Account Login" on the next screen on
the computer and create an account on the displayed
screen.
Your e-mail address will be your login ID. Be sure to
write down the password since you will need it to log in.
Add a radio station to a list of favorites
1. After you log in, the computer displays the screen that
allows you to select a desired radio station. Select
the station to add as you like, for example by filtering
stations by genre, region or language, or using the
search function.
2. Use the direction ( / ) buttons to select “NET Setting”
and press the ENTER button.
3. When “IP Address” appears press the ENTER button.
Make a note of the IP address.
4. Turn the computer on and open Internet Explorer or
another Internet browser.
5. Input this unit's IP address into the Internet browser
URL field.
2. To add the station to the bookmark list, click the add
icon (
) shown on the left of the station name.
To create a group at the time, follow the on-screen
instructions.
To remove the station from the bookmark list, click
the remove icon (
).
This unit's WEB Setup information screen will open in
the Internet browser.
When using Internet Explorer, you can also do this
by selecting “Open…” from the “File” menu and
inputting the IP address.
Storing other Internet radio
programs (My Favorites)
To listen to Internet radio programs not stored in this
unit, follow these procedures to add them to the “My
Favorites” list in the network service menu.
Network service menu
Press the NET button and press the direction (
/ ) buttons to select the menu as follows.
/
/
vTuner Internet Radio -> My Favorites -> DLNA ->
Home Media
This unit supports Internet radio stations that use
the PLS, M3U and podcast (RSS) formats. Even if
an Internet radio station uses one of these formats,
playback might not always be possible depending on the
type of data and playback format.
6. Click the “My Favorites” tab and input the name and
URL of the Internet radio station.
7. Click “Save” to finish registering that Internet radio
station.
The registered Internet radio station will be added to
“My Favorites”.
An Internet connection is necessary to listen to
Internet radio programs.
If service from the service provider stops, use of that
network services and contents might cease to be
possible.
Download from Www.Somanuals.com. All Manuals Search And Download.
19
Using network services
Starting playback
DLNA
1. Press the NET button.
About DLNA
Digital Living Network Alliance (DLNA) can be referred
to as a technology standard or the industry group to
develop the technology standard to interconnect and use
AV components, computers and other devices in a home
network. This unit allows you to use DLNA to play music
files stored on a computer or a hard disk connected to
your home network (NAS device). Make sure this unit
and a computer or NAS device are connected to the
same router.
2. Select “My Favorites” from the network service menu
and press the ENTER button to show the Internet
radio stations.
To play a music file with DLNA, you need a NAS
device or the like with DLNA server functions and
a DLNA player (software) to stream the music.You
can also stream music files using a computer with
Windows Media Player 11 or 12, which has both
DLNA server and player functions. First configure the
Windows Media Player 11 or 12 to enable streaming.
Network service menu
Press the NET button and press the direction
(
/
/ / ) buttons to select the menu as follows.
vTuner Internet Radio -> My Favorites -> DLNA ->
Home Media
With Windows Media Player 12 Remote Playback
function, you can stream music files stored on your
computer to the unit by operating the computer.
3. Select the one that you added and press the ENTER
button.
If you want to add a new radio station to the My
Setting up Windows Media Player
Favorites menu, select the blank item in the list
and press and hold the MENU button and use
the ENTER button to select “Create new station”.
Press the ENTER button again to show fields
where characters can be input and input the name
and URL.
To remove a radio station that has been added,
press and hold the MENU button while that station
is playing or select it and use the direction
Windows Media Player 11:
1. Turn on your computer and start Windows Media
Player 11.
2. In the "Library" menu, select "Media Sharing" to open
a dialog box.
3. Select the "Share my media" check box and click "OK"
to display the compatible devices.
4. Select this unit and click "Allow".
(
/
) buttons to select “Delete from My Favorites”
and press the ENTER button.You can also remove
stations using the WEB Setup screen (on a
computer).
The icon of this unit is checked when you click it.
5. Click "OK" to close the dialog box.
To change the name of a radio station that has
been added, select the radio station and press and
hold the MENU button. Then, use the direction
( / ) buttons to select “Rename this station” and
press the ENTER button.
Windows Media Player 12:
1. Turn on your computer and start Windows Media
Player 12.
2. In the "Stream" menu, select "Turn on media
streaming" to open a dialog box.
You can register up to 40 Internet radio stations.
If media streaming is already turned on, select
"More streaming options..." in the "Stream" menu
to list players in the network, and then go to step 4.
3. Click "Turn on media streaming" to list players in the
network.
4. Select this unit in "Media streaming options" and
check that it is set to "Allow".
5. Click "OK" to close the dialog box.
Download from Www.Somanuals.com. All Manuals Search And Download.
20
Using network services
automatically, or you can manually rebuild the
index. See Windows online help for instructions
about how to do this.
DLNA playback
1. Start the computer or network server.
2. Press the NET button to open the network service
menu.
Using the Play To feature
The Play To function allows you to operate DLNA-
compliant controller devices and computers on a home
network and enables this unit to play audio files that are
saved on those devices.
A DLNA-compliant controller device or computer and
this unit must be connected to the same network in
order to make My Favorites settings.
1. Turn this unit on.
2. Turn the computer on, and open Windows Media
Player.
You must set Windows Media Player in advance
3. Select the file that you want to play in Windows Media
Player and right-click it.
Network service menu
Press the NET button and press the direction (
/ ) buttons to select the menu as follows.
vTuner Internet Radio -> My Favorites -> DLNA ->
Home Media
/
/
This opens a pop-up menu.
To use the Play To feature with audio files on a
different network server, open that network server
from the list that appears under “Other Libraries”
and select the audio file that you want to play.
4. Click the “Play To” button and select this unit from the
Play To list.
3. Use the direction ( / / / ) buttons to select “DLNA”
and press the ENTER button.
Open the Windows Media Player Play To dialog box,
and start playback from this unit.
Use the Play To dialog box in Windows 7 to control
remote playback.
The Play To feature cannot be used under the
following conditions.
When using network services
During playback of an audio file on a USB device
or an iPod/iPhone
-
-
4. Use the direction( / / / )buttons to select the
network server and press the ENTER button.
The network server folder will be shown.
Some network servers do not support use of the
search function.
This unit cannot access photographs or videos on
a network server.
Depending on network server sharing settings,
some contents might not be shown. See the
operation manual of the network server.
5. Use the direction ( / ) buttons to select the audio file
that you want to play, and press the ENTER button or
play ( ) button.
Searching forward/backward and pausing functions
might not work with some media servers.
If information cannot be retrieved from a server,
“No Item” will appear on the display. If this occurs,
check the server and network connections.
Immediately after an audio file is added to a
Windows Media Player library, that file might not
appear in this unit's audio file list. This is because
the Windows library index has not been refreshed.
You can either wait for the index to refresh
Download from Www.Somanuals.com. All Manuals Search And Download.
21
Using network services
Playing from a shared folder
Home Media (playing music files in
a shared folder)
1. Press the NET button to open the network service
menu.
About a shared folder
A shared folder is configured in a network device such as
a computer or NAS device (hard disk connected to your
home network) for access from other users.You can play
music files in a shared folder on your computer or NAS
device connected to the same home network as that of
this unit. To play music files in a shared folder, you must
first configure Windows 8 or Windows 7. Make sure this
unit and a computer or NAS device are connected to the
same router.
Configure the sharing options and create a shared
folder on your computer in advance.
For information on how to configure the NAS device
and create a shared folder, refer to the NAS device's
instruction manual.
Network service menu
Press the NET button and press the direction (
/ ) buttons to select the menu as follows.
vTuner Internet Radio -> My Favorites -> DLNA ->
Home Media
/
/
2. Use the direction ( / / / ) buttons to select “Home
Setting the computer
Media” and press the ENTER button.
Configuring the sharing options:
1. Select "Choose home group and sharing options" in
the "Control Panel".
If the menu is not displayed, check that "View by" is
set to "Category".
2. Select "Change advanced sharing settings".
3. Check that the following radio buttons are selected in
"Home or Work":
"Enable network discovery"
"Turn on file and printer sharing"
"Turn on sharing so anyone with network access can
open files"
3. Use the direction ( / ) buttons to select the server
that you want to use and press the ENTER button.
Confirm the server name of your computer by viewing
its properties.
"Turn off password protected sharing"
4. Select "Save Changes" and click "OK" in the dialog
box.
4. Use the direction ( / ) buttons to select the shared
folder that you want to use and press the ENTER
button.
5. When a user name and password are required, input
the necessary account information.
Creating a shared folder
1. Select and right-click the folder to share.
2. Select "Properties".
3. Select "Advanced Sharing" on the "Sharing" tab.
Select the "Share this folder" check box and click
"OK".
4. Click "Share" for "Network File and Folder Sharing".
5. Select "Everyone" from the pull-down menu. Click
"Add" and click "Share".
After inputting the account information once, it is
saved, so you will not need to input it the next time.
Use the account information set when you created
the shared folder.
6. Press the direction ( / ) buttons to select the music
file to play and press the ENTER button or play (
)
To set a user name and password to a shared
folder, set "Permissions" in "Advanced Sharing" in
the "Sharing" tab.
button.
Playing starts.
Check that a workgroup is set.
Download from Www.Somanuals.com. All Manuals Search And Download.
22
Settings
Follow the procedures below to open the menu and
change settings.
4. Use the arrow (
/
) buttons to change setting values.
You can also turn the MENU/ENTER dial on the
main unit to do this.
1. Press the MENU button.
5. Press the ENTER button to confirm the change.
You can also press the MENU/ENTER dial on the
main unit to do this.
6. After you complete making settings, press the
RETURN button to close the menu screen.
When you press the RETURN button while viewing
the “NET Setting” submenu, “Network Save?”
will appear. Press the ENTER button to save the
settings. If you press the RETURN button, the
menu screen will close without saving the setting
changes.
MP3 Setting
You can also press and hold the MENU/ENTER
dial on the main unit to do this.
You can set how MP3/WAV file information is shown and
how MP3/WAV discs are played back, for example.
These settings can only be changed when the disc is
stopped.
2. Use the direction (
/
) buttons to select the setting
you want to change.
BAD NAME
Set how MP3/WAV file information is shown.
Regardless of the setting, characters that cannot
be shown in ID3 tag information are replaced with
asterisks (Ú).
Replace: If a track or folder name contains a
character that cannot be shown, “File_n” or “Folder_n”
(with “n” being the track/folder number) will be shown
instead.
Press a direction (
/
) button repeatedly to cycle
Not (default setting): Characters that can be shown
are shown and characters that cannot be shown are
replaced with asterisks (Ú).
through the settings in the following order.
When the input source is CD:
MP3 Setting
Update
Asb(Auto Standby)
Net Setting
ID3 VER.1
When the input source is USB:
Asb(Auto Standby)
Update
M.OPT
Audio Output
Set how ID3 Version 1.0/1.1 tag information is shown.
Read (default setting): The unit will load tag
When the input source is NET:
information and show it.
Net Setting
M.OPT
Update
Audio Output
Asb(Auto Standby)
Not Read: Tag information will not be shown.
The setting shown first depends on the current
source
ID3 VER.2
You can also turn the MENU/ENTER (
on the main unit to do this.
/
) dial
Set how ID3 Version 2.2/2.3/2.4 tag information is shown.
Read (default setting): The unit will load tag
information and show it.
3. Press the ENTER button.
You can also press the MENU/ENTER dial on the
main unit to do this.
Not Read: Tag information will not be shown.
After opening “MP3 setting” or “NET Setting”,
repeat steps 2 and 1 to make a selection in the
submenu.
HIDE NUMBER
You must wait at least one minute after turning the
unit on to select and change the “NET Setting” and
“Update” items.
The unit can hide numbers that are attached to the
beginnings of track and folder names.
Disable (default setting): Such numbers will be
shown.
Download from Www.Somanuals.com. All Manuals Search And Download.
23
Settings
Enable: Such numbers will not be shown.
NET Setting
When an MP3/WAV CD is made on a computer, the
To use network services, make network settings on this
unit in advance.
Make the settings according to the characteristics of the
network to which it is being connected.
ordinary file playback order is not determined. By
adding numbers like 01,02 and 03 to the beginnings
of MP3/WAV file names, however, they can be played
back in numerical order.
An Internet connection is necessary to listen to
Internet radio.
The “Net Standby” setting is not necessary for
connecting this unit to a network.
STOP KEY
You can set the function of the stop ( ) button on the
main unit.
If DHCP is set to Enable (default), “IP Address”,
“Subnet Mask”, “Gateway” and “DNS Server” settings
will appear, but cannot be changed.
If DHCP is set to Disable, “IP Address”, “Subnet
Mask”, “Gateway” and “DNS Server” will appear and
must be set.
Navigation (default setting): Pressing the stop (
button activates navigation mode.
)
Disable: Pressing the stop ( ) button does not
activate navigation or all folder mode.
When you press the RETURN button when viewing
the “NET Setting” submenu, “Network Save?” will
appear. After changing a setting, press the ENTER
button to save it. If you press the RETURN button, the
menu screen will close without applying the setting
changes.
All Folder: Pressing the stop ( ) button activates “all
folder” mode.
M.OPT (Music Optimizer)
The submenus appear in the following order.
IP Address: View/set the IP address.
MP3s and other files that use irreversible compression
formats have reduced audio quality compared to the
original sound sources due to their compression.
Use M.OPT to optimize compressed audio.
MAC Address: View this unit's MAC address.
DHCP:
OFF (default setting): M.OPT is not used.
Enable (default setting): DHCP is enabled.
Disable: DHCP is disabled.
ON: M.OPT is used.
Subnet Mask: View/set the subnet mask.
Gateway: View/set the default gateway.
DNS Server: View/set the DNS server address.
Proxy URL: Set the proxy server address.
Proxy Port: Set the proxy port number.
ASb (Auto Standby)
When the Auto Standby function is on, the unit will
automatically enter standby mode if 20 minutes pass
under the conditions described below.
Playback source
Condition
No disc loaded or disc stopped
Input source not playing
This only appears when a proxy URL has been set.
CD
Net Standby: This sets whether or not the unit can be
controlled over a network when the unit is in standby.
Disable (default setting): When the unit is in
standby, it cannot be controlled over a network.
Enable: When the unit is in standby, it can be
controlled over a network.
NET
USB
When this function is enabled, “ASb” appears on the
display. Use the “Net Standby” setting to set how network
control affects standby .
When set to “Enable”, more power will be
consumed when the unit is in standby.
OFF: Auto Standby is disabled.
ON (default setting): Auto Standby is enabled.
Update
You can update the firmware of this unit. Do not put the
unit in standby during an update.
See "Updating the firmware" for update procedures.
Version: This shows the current firmware version.
CN via NET/CN via USB:You can update the
firmware using a USB flash drive.
Download from Www.Somanuals.com. All Manuals Search And Download.
24
Settings
Audio Output
Make the audio output (digital/analog) settings. Select
one of the three modes according to the D/A conversion
characteristics. This section mainly describes about
digital output. Analog output signals are basically D/A
converted audio signals.
Mode 1: This mode converts the signals to PCM
44.1/48 kHz, which can be handled by most devices.
Audio with PCM 48 kHz or more sampling
frequency will be down-converted to PCM 44.1/48
kHz before being output.
DSD audio will be digitally output at PCM 44.1 kHz.
Mode 2 (default setting): Use this mode for a device
compatible with up to PCM 192 kHz digital signal
input.
Audio with up to PCM 192 kHz sampling frequency
will be output without conversion.
DSD audio will be digitally output at PCM 44.1 kHz.
Mode 3: This mode converts DSD signals to analog
signals before outputting them.
DSD audio will not be digitally output.
Audio with up to PCM 192 kHz sampling frequency
will be output without conversion.
Download from Www.Somanuals.com. All Manuals Search And Download.
25
Other operations
Inputting characters
Firmware Update
Follow these procedures to input characters when using
the NET Setting and My Favorites menus, for example.
1. Use the remote control direction ( / / / ) buttons to
select a character or symbol and press the ENTER
button.
Repeat this procedure to input more
2. After completing input, use the remote control
direction ( / / / ) buttons to select “OK” and press
the ENTER button.
Update the firmware via network or USB connection.
Download the latest firmware
Visit the Onkyo website to download the latest firmware.
(If no firmware is listed, no firmware update is available.)
See "Update" for how to check the firmware version.
Updating the firmware via network
If this is not done, the input characters will not be
saved.
The following characters can be used.
Use the network connection on the rear panel to update
the firmware.
Precautions when updating the firmware
Make sure that this unit is turned on and the Ethernet
cable is connected to the rear panel of this unit.
While updating, never disconnect or turn off this unit.
While updating, never disconnect and reconnect the
Ethernet cable.
While updating, never disconnect and reconnect the
power cord.
Do not access this unit from a computer while
updating.
Space: This inputs a blank space that is one-
character wide.
Shift*: This changes the characters shown.
(left)/
(right)
Use these to move the cursor in the text input area.
BS (backspace)**: Delete characters to the left of the
cursor. Move the cursor left.
Updating takes about five minutes to be completed.
Settings you made are retained after updating.
OK: Select when input complete.
You can also change them by pressing the >10
button.
You can press the CLEAR button to delete all
the input characters at once.
*
Before starting a firmware update
Before starting an update, check the
network connection.
**
Stop any playing Internet radio, iPod/
iPhone, USB flash drive or server.
Update procedures
1. Press the MENU button and press the direction ( / )
buttons to select "Update".
2. Press the ENTER button.
Wait for a while if "Not Available" is displayed and
"Update" cannot be selected.
3. Press the direction ( / ) buttons to select "CN via
NET" and press the ENTER button.
The option does not appear when no firmware
update is available.
4. Select "UpdateStart" and press the ENTER button.
Updating starts.
5. "Completed" appears on the unit's display when
updating is completed.
6. Press the ON/STANDBY button on the front panel to
put the unit into standby.
Do not use the remote control at this time. If you
do nothing for three minutes, the unit will enter
standby automatically.
Download from Www.Somanuals.com. All Manuals Search And Download.
26
Other operations
Case 1
Updating the firmware via USB connection
When an error occurs, “Error!! *-**” or an error message
appears on the display of this unit. (Letters and
numbers appear in place of the asterisks.) Refer to the
descriptions below to check the meaning.
Use the USB port to update the firmware.
You need a 32 MB or larger capacity USB flash drive
for updating.
Precautions when updating the firmware
Error code
Before updating, stop playback and disconnect
anything connected to the USB ports.
*-10, *-20: The LAN cable could not be recognized.
Connect the LAN cable properly.
While updating, never put the unit into standby mode,
or disconnect the power cord or the USB flash drive
being used for the update.
Do not access this unit from a computer during an
update.
*-11,*-13,*-21,*-28: Internet connection could not
be established. Check the following points.
Confirm that the IP address, subnet mask,
gateway address and DNS server setting are
correct.
Completing the update takes about five minutes.
Settings are retained after an update
Confirm that the router is turned on.
Confirm that the unit and router are connected
with a LAN cable.
Check the router setting. For the setting, see the
instruction manual of the router.
Update procedures
This unit may fail in network connection if your
1. Connect a USB flash drive to the computer that you
are using and delete any files on it.
2. Download the firmware file to the computer from our
website.
network environment does not allow multiple
device connections. Consult your Internet
service provider (ISP).
You need a router separately if your modem
Decompress the downloaded file on the computer.
does not have the router function. Depending on
your network connection environment, you need
to configure the proxy server. For information
on the configuration, consult the document
provided by your carrier or ISP provider.
If you still cannot connect to the Internet, the
DNS server or proxy server may be temporarily
down.
Do not change the names of the decompressed
files.
3. Copy the decompressed files to the root folder of the
USB flash drive.
Do not copy any files other than the decompressed
files. Do not copy the compressed file.
4. Confirm that this unit is on.
5. Connect the USB flash drive with the decompressed
files to the USB port on the front of the unit.
6. Press the INPUT button to change the source to
USB(F).
Check the service status with your ISP provider.
Others: Retry from the beginning. If the error
persists, check the error code and contact Onkyo
Support shown at the end of the manual.
“Now Initializing…” appears on the display, followed by
the name of the USB flash drive.
Case 2
Loading the USB flash drive takes about 20 to 30
seconds.
If an error occurs during updating, disconnect and
reconnect the power cord, and retry updating.
7. Press the MENU button to open the menu and use
the direction ( / ) buttons to select “Update”.
Case 3
If you do not have access to the Internet, contact Onkyo
Support shown at the end of manual.
8. Press the ENTER button.
9. Use the direction ( / ) buttons to select “CN via
USB?” and press the ENTER button.
This selection will not appear (and cannot be
selected) if the flash drive does not contain
firmware that can be used to update the unit.
Download from Www.Somanuals.com. All Manuals Search And Download.
27
Other operations
10. Select “UpdateStart?” and press the ENTER button.
The unit firmware starts to be updated.
11. After “Complete” appears, disconnect the USB flash
drive.
12. Press the ON/STANDBY button to put the unit into
tandby
Do not use the remote control ON/STANDBY
button in this case.
If you do nothing for three minutes, the unit will
enter standby automatically.
This completes the update. The unit should now be
using the latest firmware.
Error codes
When an error occurs, “Error! *-**” or an error message
appears on the display of this unit. (Letters and numbers
appear in place of the asterisks.) Refer to the error code
list to check the meaning.
Error codes
Meaning and countermeasures
*-10, *-20
The USB flash drive could not be
recognized.
Confirm that the USB flash drive or USB
cable is securely connected to the USB
port on the front of the unit.
*-14
The root folder of the USB flash drive
does not contain a firmware file or the
firmware file is for a different model,
for example. Follow the instructions
on the C-N7050 product website to
download the firmware and conduct the
process again. If the same error occurs
repeatedly, make a note of the error code
and contact your dealer.
Other codes
Conduct the process again from the
beginning.
If the same error occurs repeatedly,
make a note of the error code and
contact your dealer.
If an error occurs during an update, unplug the unit's
power cord once and plug it into the outlet again
before trying the update one more time.
Download from Www.Somanuals.com. All Manuals Search And Download.
28
Reference Information
Reference Information
Using an iPod or iPhone
Precautions for use
Do not use cracked discs because they could damage
the unit.
When writing something on the label side of a disc,
use a felt tip permanent marker. The use of a ballpoint
pen or other pen with a hard tip could damage the
disc, making it unplayable.
This unit can be connected to and used with the following
iPod/iPhone models.
iPhone 5s, iPhone 5c, iPhone 5
iPhone 4s, iPhone 4
iPhone 3GS, iPhone 3G
iPhone
Never use commercially-available CD stabilizers.
Doing so could make the disc unplayable or damage
the unit.
iPod touch (1st, 2nd, 3rd, 4th, and 5th generation)
iPod classic
iPod nano (2nd, 3rd, 4th, 5th, 6th, and 7th generation)
If a CD-R/CD-RW disc that has a printable label
surface is left in this unit for a long time, it could stick
to the inside and become extremely difficult to remove
and possibly even cause the unit to malfunction.
This unit cannot output video from an iPod or iPhone.
Use the USB cable supplied with the iPod or iPhone
to connect it to the unit.
Always remove such discs and store them in cases
when not in use. Moreover, avoid using discs that
have just been printed because they are especially
prone to sticking.
If the unit or remote control buttons do not work
properly with your iPod or iPhone, updating its
software might solve the problem.
Handling discs
Notes about discs
Always load discs with their labeled sides up.
Be careful when handling discs. If the side that
contains the data (unlabeled side) is scratched,
smudged with fingerprints or otherwise dirty or
marred, errors could occur during playback.
Types of discs that can be played by this unit
CDs with the “COMPACT disc DIGITAL AUDIO” logo
To remove a disc from its case, while pressing down
on the center of the case, hold the disc by its edges.
CD-R and CD-RW discs that have been properly
recorded and finalized using the audio CD format.
CD-R and CD-RW discs that have been recorded with
MP3/WAV files and properly finalized.
Disc storage
After you finish using a disc, always put it back into
its case for storage. Failure to do so could result in
warping and scratches.
This unit can play the above types of discs without using
an adapter. This unit cannot play discs of types other
than those above.
Do not leave discs in places that are exposed to
direct sunlight or that are very humid or hot. Doing so
could cause discs to become deformed or degraded,
making them unplayable.
CD-R and CD-RW discs are more susceptible to the
If you try to play any other type of disc with this
unit, loud noises that damage speakers or harm
hearing could occur. Never try to play any type of
disc other than those shown above.
impacts of heat and ultraviolet rays than ordinary
CDs. For this reason, do not leave them for long times
in places that are exposed to direct sunlight or near
devices that generate heat, for example.
Always clean discs before storing them. Leaving a
disc in an unclean state might result in skipping or
degraded sound quality.
This unit might not be able to properly play Copy
Control CDs, Dual Discs or other special CDs that do
not conform to the Red Book CD standard. Operation
and sound quality cannot be guaranteed when special
discs are used in this unit. If playback of a special disc
should cause trouble, contact the seller of the disc.
Precautions for Rental Discs
Do not use discs with residue from cellophane tape,
rental discs with labels which are peeling off, or discs
with decorative labels. This type of disc could get
stuck in the CD receiver, or could damage the CD
receiver.
CD-R/CD-RW discs
This unit can play discs that are in audio CD format (CD-
DA) and CD-R/CD-RW that have files in MP3 and WAV
formats.
Be sure to finalize discs created by CD recorders.
Depending on the quality of the disc and the condition
of the recording, playback might not be possible. For
details, see the operation manual for the device you
are using.
If you have any questions about how to handle a
CD-R or CD-RW disc, contact the seller of the disc
directly.
Maintenance
If the side of the disc that has the data encoded on
it (unlabeled side) becomes dirty with fingerprints or
dust, use a soft cloth to wipe the surface from the
center directly toward the edge.
Never use record cleaners, antistatic treatments,
thinners or similar chemicals to clean discs. Such
chemicals could harm the surface of the disc.
Download from Www.Somanuals.com. All Manuals Search And Download.
29
same format, sampling frequency, channels and
quantization bit rate
The Play To feature does not support gapless
playback.
MP3/WAV formats
This unit can play MP3 and WAV files that have been
recorded on a CD-R or CD-RW disc.
Playable audio file formats
MP3 (extension: “.mp3”, “.MP3” )
MP3
File extension
Standard
mp3, .MP3
MPEG-1/MPEG-2 Audio Layer-3
Standard
MPEG-1/MPEG-2 Audio
Layer-2/Layer-3
Sampling frequency
Sampling Frequency
16 kHz, 22.05 kHz, 24 kHz,
8 kHz, 11.025 kHz, 12kHz, 16 kHz,
22.05 kHz, 24 kHz, 32 kHz, 44.1 kHz,
48 kHz
32kHz, 44.1kHz, 48 kHz
8 kbps–320 kbps or VBR
Bit rate
Bit rate
8 kbps–320 kbps or VBR
Variable bit rate (VBR) is supported. However,
the time and other information shown on the
display during playback of a VBR file might be
incorrect sometimes.
WMA
File extension
Sampling frequency
..wma, .WMA
8 kHz, 11.025 kHz, 16 kHz, 22.05 kHz,
32 kHz, 44.1 kHz, 48 kHz
WAV (extension: “.wav”, “.WAV”)
Sampling Frequency
Bit rate
5 kbps–320 kbps or VBR
8 kHz, 11.025 kHz, 12 kHz, 16 kHz,
Copyright protected files cannot be played.
WMA Pro/Voice not supported
22.05 kHz, 24 kHz,
32 kHz, 44.1 kHz, 48 kHz
Quantization bit rate
WMA Lossless
File extension
8-bit, 16-bit
.wma or .WMA
Sampling frequency
44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz,
16-bit, 24-bit
Precautions when creating MP3/WAV discs
using a computer
Quantization bit rate
This unit cannot play back discs that were not written
in conformity to the ISO 9660 standard.
WAV
File extension
Sampling frequency
.wav, .WAV
The unit recognizes MP3 and WAV files by their file
extensions, which are “.mp3” and “.wav”, respectively.
Always include the extension in the file name.
8 kHz, 11.025 kHz, 12 kHz, 16 kHz,
22.05 kHz, 24 kHz, 32 kHz, 44.1 kHz
48 kHz, 64 kHz, 88.2 kHz, 96 kHz
176.4 kHz, 192 kHz
The unit cannot recognize files without these file
extensions. Even if one of these file extensions is
added to a file name, however, this unit cannot play
files that are not in the MP3 or WAV data format.
Quantization bit rate 8-bit, 16-bit, 24-bit
WAV files contain uncompressed PCM digital audio.
AAC
After recording a CD-R/CD-RW disc, close the
session (complete disc creation). This unit cannot play
back discs that have unclosed sessions.
File extension
.aac, .m4a, .mp4, .3gp, .3g2, .AAC,
.M4A, .MP4, .3GP, .3G2
MPEG-2/MPEG-4 Audio
This unit can play back files from a maximum of 99
Standard
Sampling frequency
folders. Furthermore, the unit can recognize and play
back a maximum of 499 folders (including the root
folder) and files.
8 kHz, 11.025 kHz, 12 kHz,
16 kHz, 22.05 kHz,
24 kHz, 32 kHz, 44.1 kHz,
48 kHz, 64 kHz, 88.2 kHz, 96 kHz
8 kbps–320 kbps or VBR
Multiple sessions recorded on the same disc are not
supported. Only the first session on such discs can be
played back.
Bit rate
Depending on the condition of the disc, this unit might
not be able to play it back or audio skipping could
occur.
FLAC
File extension
Sampling frequency
.flac, .FLAC
This unit cannot play audio files with copyright
protection from a disc.
8 kHz, 11.025 kHz, 16 kHz, 22.05 kHz,
32 kHz, 44.1 kHz, 48 kHz, 64 kHz,
88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz
USB and Networks
Quantization bit rate
Audio files playable by this unit
8-bit, 16-bit, 24-bit
This unit can play the following types of audio files
over a USB or network connection.
This unit supports gapless playback of a USB flash
device in the following conditions.
Ogg Vorbis
File extension
Sampling frequency
.ogg, .OGG
8 kHz, 11.025 kHz, 16 kHz, 22.05 kHz,
32 kHz, 44.1 kHz, 48 kHz
When WAV, FLAC and Apple Lossless files are
consecutively played back and they have the
Download from Www.Somanuals.com. All Manuals Search And Download.
30
Bit rate
48 kbps–500 kbps or VBR
Audio from computers cannot be input through this
unit's USB ports.
This unit might not be able to use media that is loaded
into a USB card reader.
Depending on the USB flash drive and its contents,
reading data from it might take some time.
Depending on the USB flash drive, the unit might
not be able to read its data correctly or supply power
properly.
Incompatible files cannot be played back
LPCM (Linear PCM)
Sampling frequency
44.1 kHz, 48 kHz
Quantization bit rate
16-bit
Playback only supported over a network.
During the use of USB flash drives, please be aware
that our company will take no responsibility should
data be lost or changed, a USB flash drive become
damaged or other harm occur.
We recommend backing up data saved on a USB
flash drive before using it with this unit.
This unit does not support USB flash drives with
security functions.
Apple Lossless
File extension
Sampling frequency
.m4a, .mp4, .M4A, .MP4
8 kHz, 11.025 kHz, 12 kHz, 16 kHz,
22.05 kHz, 24 kHz, 32 kHz, 44.1 kHz,
48 kHz, 64 kHz, 88.2 kHz, 96 kHz
Quantization bit rate
16-bit, 24-bit
DSD
File extension
Sampling frequency
.dsf, .DSF
Note about DLNA
The Digital Living Network Alliance (DLNA) is a group
that is advancing the standardization of reciprocal
connections and the exchange of audio, image, video
and other data among computers, game devices and
digital household appliances over ordinary home
networks (LAN). This unit complies with version 1.5 of the
DLNA guidelines.
2.8224 MHz, 5.6448 MHz
CAUTION
This unit does not support the following formats when
using the Play To feature of Windows Media Player.
FLAC, Ogg Vorbis, DSD
When playing back audio files over a network, the
types of file formats that can be played back also
depend on the software running on the network
server. For example, when using Windows Media
Player 11, not all audio files on the computer can be
played back. Only audio files that have been added to
the Windows Media Player 11 library can be played
back.
Note about servers
This unit supports the following versions of Windows
Media Player.
Windows Media Player 11
Windows Media Player 12
Servers that comply with DLNA
When playing back files that have been recorded at
variable bit rate (VBR), the playback time might not be
shown correctly.
A network server must be connected to the same
network as this unit.
This unit supports up to 20,000 files and 16 folder levels
within a single folder.
Notes about USB flash drives
Only an USB flash drive can be used with this unit.
Depending on the type of media server, this unit might
FAT16 and FAT32 formats are supported for USB
flash drives.
not recognize it or be able to play audio files saved on it.
If a USB flash drive is divided into multiple partitions,
this unit will recognize them as separate volumes.
Note about network services
This unit supports up to 20,000 files and 16 folder
levels within a single folder.
This unit does not support USB hubs or devices with
USB hub functions. Never connect such devices to
this unit.
The network services that can be used will differ
according to the region.
Network services and contents that you can use
through this unit could become unusable without
warning if the service provider stops service.
Neither WAV files with bit rates of 176.4 kHz and
higher nor 5.6MHz DSD files can be played back from
a USB flash drive that is connected to the USB(R)
port on the back of the unit.
CAUTION
If the connected media is not supported, “Not
Connected” appears on this unit's display.
This unit cannot play back audio files if copyright
protection is used.
Do not connect computers to this unit's USB ports.
Download from Www.Somanuals.com. All Manuals Search And Download.
31
Troubleshooting
General
Audio files
The unit does not turn on.
Playback is not possible.
Confirm that the power plug is securely plugged in to
an outlet.
Check the file format. For information about playable
file formats, see "MP3/WAV formats" for CDs and
"Audio files playable by this unit" for USB and
playback over the network.
Unplug the power cord once, wait five seconds and
then plug it in again.
The names of tracks, artists and albums are
not shown.
The unit turns off.
When the Auto Standby function is enabled, the unit
will enter standby automatically after a set amount of
time. Check the settings.
There is no ID3 tag information for the music file.
Use a computer, for example, to prepare MP3 files
with corrected ID3 tag information.
No sound is output.
Some characters are not shown correctly.
Confirm that the input source is selected correctly.
This unit cannot display symbols and full-size or
double-byte characters (such as Japanese, Chinese,
etc.) correctly. File names for MP3, WMA or other file
formats should consist of alphanumeric characters. If
the file information uses Japanese, Chinese or other
double-byte characters, playback is possible but the
name will not be shown correctly.
Remote control does not work.
If the batteries are exhausted, replace both of them
with new ones.
Point the remote control at the front panel of the unit
from a distance of less than about 5 m (16 ft).
The remote control will not work if there is an
obstruction between it and the main unit. In this
case, try changing the position.
iPod/iPhone
Playback is not possible.
If a fluorescent light is near the unit, turn the light off.
Disconnect the iPod/iPhone from the USB port, wait
a few seconds, and connect it again.
There is noise.
Place the unit as far away as possible from TVs and
other devices that have strong magnetism.
Updating to the latest iPod/iPhone software might
resolve the problem.
Download the latest software from the following
website.
CD player
country/?dest=downloads
Playback is not possible.
If the disc is upside down, reload it with the labeled
side up.
Cannot operate the iPod/iPhone.
Make sure the iPod/iPhone is not locked.
If the disc is dirty, wipe it clean.
You cannot adjust the unit volume using an iPod/
iPhone.
If a blank disc is loaded, replace it with a disc that
has recordings on it.
Depending on the quality of the disc and the
condition of the recording, playback of a CD-R/CD-
RW might not be possible.
Internet radio
Cannot connect to the Internet.
This unit cannot play back unfinalized CD-R/CD-RW
discs.
Confirm that a computer can connect to the Internet
using the same network.
The sound skips.
Enter a correct network connection password.
Check the settings of the network’s firewall.
Vibrations will cause the sound to skip. Install this
unit in a stable location.
The station/podcast might not be available at the
moment.
If the disc is dirty, wipe it clean.
The link for the station/podcast might be out of date.
Do not use discs that are scratched or cracked.
The number of registered users for the station/
podcast might have already reached a limit, making
it unavailable to the public.
If the Internet connection speed is too slow,
searching might take time.
Download from Www.Somanuals.com. All Manuals Search And Download.
32
Cannot listen to an Internet radio station or
podcast.
Restoring factory default settings
If this unit does not operate properly, follow the
procedures below to restore it to the default settings that
it had when shipped new from the factory. Doing this
might correct the problem.
The broadcaster might have a temporary problem
with their Internet connection.
Confirm that your system is properly connected to
the Internet.
While the unit is on, press and hold the stop ( )
button and press the ON/STANDBY button.
DLNA
Cannot connect to the network.
Check the settings of the network’s firewall.
Confirm that a DLNA server on the same network
can connect to the network.
Confirm that the password to connect to the DLNA
server is correct.
Confirm that the DLNA server is not shut down or in
sleep mode.
There might be a problem with the network
authentication. Press the INPUT button to select
NET again.
Cannot find a track.
Note about condensation
If this unit is brought from a cold outdoor environment
into a warm room, or the heater has just been turned
on in the room where it is located, for example,
condensation might occur on operating parts or lenses,
resulting in improper operation. If this occurs, leave the
unit on and wait 1-2 hours. This should enable normal
playback.
Add the track to the media library of Windows Media
Player.
Select this unit from the Windows device list.
If the computer is using antivirus or security
software, the unit might not be able to connect to it.
Home Media
Cannot find a folder/file.
Make folder/file sharing settings.
Add the file to the shared folder.
Confirm that the password for the user account is
correct.
Check the file format.
If the computer is using antivirus or security
software, the unit might not be able to connect to it.
This unit uses a microprocessor, so noise and
other external interference could cause it to
stop functioning properly. If this should occur,
unplug the unit’s power from the outlet and
wait a little while before plugging the power in
again and retrying the operation.
If the unit still does not function properly after doing the
above, follow the procedures in "Restoring factory default
settings" to restore the unit to its factory default settings,
and try the operation again.
Download from Www.Somanuals.com. All Manuals Search And Download.
33
Specifications
Frequency Response:
10Hz ~ 70kHz (192kHz/24bit)
Audio Dynamic Range:
108 dB (192kHz/24bit)
LPF 22kHz, A-Weight (@1kHz)
THD (Total Harmonic Distortion):
0.003% (192kHz/24bit)
LPF 22kHz (@1kHz)
Signal to Noise Ratio:
115 dB (192kHz/24bit)
LPF 22kHz, A-Weight (@1kHz)
Rated RCA Output Level and Impedance:
2.0 V(rms) / 200 Ω
Audio Output (Digital/Optical):
-22.5 dBm
Audio Output/Impedance (Digital/Coaxial):
0.5 V p-p / 75 Ω
Operation Condition Temperature/Humidity:
5 °C ~ 35 °C ( 41 F ~ 95 F) / 5 % ~ 85 %
Power Supply:
AC 220-240 V, 50 Hz
Power Consumption:
30 W
Stand-by Power Consumption:
5.5 W
Dimensions (W × H × D):
435 × 102 × 302 mm
(17 1/8 × 4 × 11 7/8 inches)
Weight:
4.6 kg (10 1/8 lbs)
Disc Compatibility:
CD-DA, CD-R, CD-RW
* Discs that have not been properly finalized may only be
partially playable or not playable at all.
■ Audio Outputs
Digital Outputs:
Analog Outputs:
1 (OPTICAL), 1 (COAXIAL)
1
■ Others
RI:
2
Ethernet:
USB:
1
2 (Front: USB2.0, Rear USB1.1)
Specifications and features are subject to change
without notice.
Download from Www.Somanuals.com. All Manuals Search And Download.
34
Trademarks and other legal statement
DISCLAIMER
Microsoft, Windows, Windows Media and Internet
Explorer are either registered trademarks or trademarks
of Microsoft Corporation in the United States and/or
other countries.
Through this device you are able to link to other
services or websites which are not under the control
of any company which has designed, manufactured or
distributed/have distributed this device, and its affiliates
(collectively, “Company”). We have no control over the
nature, content and availability of those services. The
inclusion of any links does not necessarily imply a
recommendation or endorse the views expressed within
them.
All information, content and services available through
this device belong to third parties and are protected by
copyright, patent, trademark and/or other intellectual
property laws of applicable countries.
The information, content and services provided through
this device are for your personal, noncommercial use
only. Any information, content or services may not be
used in any manner other than previously approved by
the appropriate content owner or service provider.
You may not modify, copy, republish, translate, exploit,
create derivative works, upload, post, transmit, sell or
distribute in any manner any information, content or
services available through this device, unless expressly
permitted by the appropriate copyright, patent, trademark
and/or other intellectual property owner, including,
without limitation, content owner or service provider.
THE CONTENT AND SERVICES AVAILABLE
iPhone, iPod, iPod classic, iPod nano and iPod touch are
trademarks of Apple Inc., registered in the U.S. and other
countries.
"Made for iPod" and "Made for iPhone" mean that an
electronic accessory has been designed to connect
specifically to iPod or iPhone respectively, and has been
certified by the developer to meet Apple performance
standards. Apple is not responsible for the operation of
this device or its compliance with safety and regulatory
standards.
Please note that the use of this accessory with iPod or
iPhone may affect wireless performance.
DLNA®, the DLNA Logo and DLNA CERTIFIED® are
trademarks, service marks, or certification marks of the
Digital Living Network Alliance.
THROUGH THIS DEVICE ARE PROVIDED “AS IS”.
COMPANY DOES NOT WARRANT INFORMATION,
CONTENT OR SERVICES SO PROVIDED, EITHER
EXPRESSLY OR IMPLIEDLY, FOR ANY PURPOSE.
COMPANY EXPRESSLY DISCLAIMS ANY
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
BUT NOT LIMITED TO, WARRANTIES OF TITLE, NON-
INFRINGEMENT, MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE.
Company makes no representation or warranty of any
kind, express or implied, about the completeness,
accuracy, validity, legality, reliability, suitability or
availability with respect to the information, content or
services available through this device. Company shall
not be liable, whether in contract or tort, including
negligence and strict liability, for any direct, indirect,
special, incidental or consequential damages or any
other damages arising out of, or in connection with, any
information contained in, or as a result of the use of
any content or service by you or any third party, even
if Company has been advised of the possibility of such
damages, nor shall Company be liable for any third party
claims against users of this device or any third party.
In no event shall Company be responsible nor liable
for, without limiting the generality of the foregoing, any
interruption or suspension of any information, content or
service available through this device. Company is neither
responsible nor liable for customer service related to
the information, content and services available through
this device. Any question or request for service relating
to the information, content or services should be made
directly to the appropriate content owners and services
providers.
Download from Www.Somanuals.com. All Manuals Search And Download.
35
Kitahama Chuo Bldg, 2-2-22 Kitahama, Chuo-ku, OSAKA 541-0041, JAPAN
The Americas
18 Park Way, Upper Saddle River, N.J. 07458, U.S.A.
For Dealer, Service, Order and all other Business Inquiries:
Tel: 201-785-2600 Fax: 201-785-2650
For Product Support Team Only:
1-800-229-1687
Europe
Liegnitzerstrasse 6, 82194 Groebenzell, GERMANY
Tel: +49-8142-4401-0 Fax: +49-8142-4208-213
Meridien House, Ground floor, 69 - 71 Clarendon Road, Watford, Hertfordshire, WD17 1DS, United Kingdom
Tel: +44 (0)8712-00-19-96 Fax: +44 (0)8712-00-19-95
China
(Hong Kong)
Unit 1033, 10/F, Star House, No 3, Salisbury Road, Tsim Sha Tsui Kowloon, Hong Kong.
Tel: 852-2429-3118 Fax: 852-2428-9039
(Mainland)
1301, 555 Tower, No.555 West NanJing Road, Jing’an District, Shanghai, China 200041,
Tel: 86-21-52131366 Fax: 86-21-52130396
Asia, Oceania, Middle East, Africa
Please contact an Onkyo distributor referring to Onkyo SUPPORT site.
The above-mentioned information is subject to change without prior notice.
Visit the Onkyo web site for the latest update.
D1406-0
SN 29401898
(C) Copyright 2014 Onkyo Corporation Japan. All rights reserved.
* 2 9 4 0 1 8 9 8 *
Download from Www.Somanuals.com. All Manuals Search And Download.
|