English
Compact Disc Player
C-705TX
Instruction Manual
COMPACT DISC PLAYER
TR-1
DUAL OPTICAL OUTPUT
STANDBY/ON
STANDBY
DISPLAY
C-705TX
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safeguards
1. Read Instructions – All the safety and 10. Power Sources – The appliance should be
connected to a power supply only of the type
described in the operating instructions or as
marked on the appliance.
operating instructions should be read before
the appliance is operated.
2. Retain Instructions – The safety and
operating instructions should be retained for
future reference.
11. Polarization – If the appliance is provided with a
polarized plug having one blade wider than the
other, please read the following information:
The polarization of the plug is a safety feature.
The polarized plug will only fit the outlet one
way. If the plug does not fit fully into the outlet,
try reversing it. If there is still trouble, the user
should seek the services of a qualified electrician.
Under no circumstances should the user attempt
to defeat the polarization of the plug.
3. Heed Warnings – All warnings on the
appliance and in the operating instructions
should be adhered to.
4. Follow Instructions – All operating and use
instructions should be followed.
5. Water and Moisture – The appliance should
not be used near water – for example, near a
bathtub, washbowl, kitchen sink, laundry tub,
in a wet basement, or near a swimming pool,
and the like.
12. Power-Cord Protection – Power-supply
cords should be routed so that they are not
likely to be walked on or pinched by items
placed upon or against them, especially near
plugs, convenience receptacles, and the point
where they exit from the appliance.
6. Carts and Stands – The appliance should be
used only with a cart or stand that is
recommended by the manufacturer.
PORTABLE CART WARNING
13. Cleaning – The appliance should be cleaned
6A. An appliance and cart
only as recommended by the manufacturer.
combination should be
moved with care. Quick
stops, excessive force, and
uneven surfaces may cause
14. Nonuse Periods – The power cord of the
appliance should be unplugged from the outlet
when left unused for a long period of time.
the appliance and cart
combination to overturn.
S3125A
15. Object and Liquid Entry – Care should be taken
so that objects do not fall and liquids are not spilled
into the enclosure through openings.
7. Wall or Ceiling Mounting – The appliance
should be mounted to a wall or ceiling only
as recommended by the manufacturer.
16. Damage Requiring Service – The appliance
should be serviced by qualified service
personnel when:
8. Ventilation – The appliance should be
situated so that its location or position does
not interfere with its proper ventilation. For
example, the appliance should not be situated
on a bed, sofa, rug, or similar surface that
may block the ventilation openings; or if
placed in a built-in installation, such as a
bookcase or cabinet that may impede the flow
of air through the ventilation openings, there
should be free space of at least 5 cm (2 in.)
and an opening behind the appliance.
A. The power-supply cord or the plug has
been damaged; or
B. Objects have fallen, or liquid has been
spilled into the appliance; or
C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate
normally or exhibits a marked change in
performance; or
E. The appliance has been dropped, or the
enclosure damaged.
9. Heat – The appliance should be situated away
from heat sources such as radiators, heat
registers, stoves, or other appliances (including
amplifiers) that produce heat.
17. Servicing – The user should not attempt to
service the appliance beyond that described in
the operating instructions. All other servicing
should be referred to qualified service personnel.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
1. Warranty Claim
5. Care
You can find the serial number on the rear panel From time to time you should wipe the front and
of this unit. In case of warranty claim, please re- rear panels and the cabinet with a soft cloth. For
port this number.
heavier dirt, dampen a soft cloth in a weak solu-
tion of mild detergent and water, wring it out dry,
and wipe off the dirt. Following this, dry immedi-
ately with a clean cloth.
2. Power
WARNING
BEFORE PLUGGING IN THE UNIT FOR THE FIRST
TIME, READ THE FOLLOWING SECTION CARE-
FULLY.
Do not use rough material, thinners, alcohol or
other chemical solvents or cloths since these could
damage the finish or remove the panel lettering.
The voltage of the available power supply differs
according to country or region. Be sure that the
power supply voltage of the area where this unit
will be used meets the required voltage (e.g., AC
230 V, 50 Hz or AC 120 V, 60 Hz) written on the
rear panel.
6. Points to remember
If this unit is brought from a cold environment to
a warm one or is in a cold room that is quickly
heated, condensation may form on the pickup,
preventing proper operation. In this case, remove
the disc and leave the power ON for about one
hour to remove the condensation.
Setting the STANDBY button to standby does not
shut off the power completely. So the power cord
should be removed from the AC outlet when the
unit is not used for a prolonged time.
When transporting this unit, be careful not to
bump it.
3. Do not touch this unit with wet hands
Do not handle this unit or power cord when your
hands are wet or damp. If water or any other liq-
uid enters the case, take this unit to an authorized
service center for inspection.
4. Location of this unit
Place this unit in a well-ventilated location.
Take special care to provide plenty of ventilation
on all sides of this unit especially when it is placed
in an audio rack. If ventilation is blocked, this unit
may overheat and malfunction.
Do not expose this unit to direct sunlight or heat-
ing units as this unit’s internal temperature may
rise and shorten the life of the pickup.
Avoid damp and dusty places and places directly
affected by vibrations from the speakers. In par-
ticular, avoid placing the unit on or above one of
the speakers.
Be sure this unit is placed in a horizontal position.
Never place it on its side or on a slanted surface as
it may malfunction.
Do not place near tuners or TV sets.
If placed next to a TV or tuner, it may cause recep-
tion interference resulting in some noise in the TV
or tuner output.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
For U.S. model
The laser is covered by a housing which prevents
exposure during operation or maintenance. How-
ever, this product is classified as a Laser Product
by CDRH (Center for Devices and Radiological
Health) which is a department of the Food and
Drug Administration. According to their regula-
tions 21 CFR section 1002.30, all manufactures
who sell Laser Products must maintain records of
written communications between the manufac-
turer, dealers and customers concerning radiation
safety. If you have any complaints about instruc-
tions or explanations affecting the use of this prod-
uct, please feel free to write to the address on the
back page of this manual. When you write us,
please include the model number and serial num-
ber of your unit.
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
In compliance with Federal Regulations, the certi-
fication, identification and the period of manu-
facture are indicated on the rear panel.
FCC INFORMATION FOR USER
CAUTION:
The user changes or modifications not expressly
approved by the party responsible for compliance
could void the user’s authority to operate the
equipment.
NOTE:
This equipment has been tested and found to com-
ply with the limits for a Class B digital device, pur-
suant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses and can radiate
radio frequency energy and, if not installed and
used in accordance with the instructions, may
cause harmful interference to radio communica-
tions. However, there is no guarantee that inter-
ference will not occur in a particular installation. If
this equipment does cause harmful interference
to radio or television reception, which can be de-
termined by turning the equipment off and on,
the user is encouraged to try to correct the inter-
ference by one or more of the following measures:
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
For Canadian model
For British model
CAUTION: THIS DIGITAL APPARATUS DOES NOT Replacement and mounting of an AC plug on the
EXCEED THE CLASS B LIMITS FOR RADIO NOISE power supply cord of this unit should be performed
EMISSION FROM DIGITAL APPARATUS SET OUT IN only by qualified service personnel.
THE RADIO INTERFERENCE REGULATIONS OF THE
CANADIAN DEPARTMENT OF COMMUNICA-
TIONS.
IMPORTANT
The wires in the mains lead are coloured in accor-
dance with the following code:
Blue
Brown : Live
: Neutral
For models having a power cord with a polarized
plug:
As the colours of the wires in the mains lead of
this apparatus may not correspond with the
coloured markings identifying the terminals in your
plug, proceed as follows:
The wire which is coloured blue must be connected
to the terminal which is marked with the letter N
or coloured black.
The wire which is coloured brown must be con-
nected to the terminal which is marked with the
letter L or coloured red.
CAUTION: TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG TO WIDE SLOT,
FULLY INSERT.
Modele pour les Canadien
ATTENTION: L’INTERFÉRENCE RADIO
ÉLECTRIQUE GÉNÉRÉE PAR CET APPAREIL
NUMÉRIQUE DE TYPE B NE DÉPASSE PAS LES
LIMITES ÉNONCÉES DANS LE RÈGLEMENT SUR LES
PERTURBATIONS RADIO ÉLECTRIQUES, SECTION
APPAREIL NUMÉRIQUE, DU MINISTÈRE DES COM-
MUNICATIONS.
IMPORTANT
A 5 ampere fuse is fitted in this plug. Should the
fuse need to be replaced, please ensure that the
replacement fuse has a rating of 5 amperes and
that it is approved by ASTA or BSI to BS1362. Check
for the ASTA mark or the BSI mark on the body of
the fuse.
IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR
THE SOCKET OUTLET IN YOUR HOME, THEN THE
FUSE SHOULD BE REMOVED AND THE PLUG CUT
OFF AND DISPOSED OF SAFELY. THERE IS A DAN-
GER OF SEVERE ELECTRICAL SHOCK IF THE CUT
OFF PLUG IS INSERTED INTO ANY 13 AMPERE
SOCKET.
Sur les modèles dont la fiche est polarisée:
ATTENTION: POUR ÉVITER LES CHOCS
ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS
LARGE DE LA FICHE DANS LA BORNE
CORRESPONDANTE DE LA PRISE ET POUSSER
JUSQU’AU FOND.
If in any doubt, please consult a qualified electri-
cian.
Declaration of Conformity
We,
ONKYO EUROPE
ELECTRONICS GmbH
INDUSTRIESTRASSE 20
82110 GERMERING,
GERMANY
declare in own responsibility, that the ONKYO product described
in this instruction manual is in compliance with the corresponding
technical standards such as EN60065, EN55013, EN55020 and
EN61000-3-2, -3-3.
GERMERING, GERMANY
A.HORIUCHI
ONKYO EUROPE ELECTRONICS GmbH
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of contents
Connections
Connecting to Onkyo Separate Collection series components ......................... 8
Connecting to the other components ........................................................... 10
Operations
Playing CDs................................................................................................... 13
Other Information
Handling CDs................................................................................................ 19
Troubleshooting ............................................................................................ 20
Indexed to parts and controls ........................................................................ 21
Specifications ................................................................................................ 23
Supplied accessories
Check that the following accessories are supplied with this unit.
remote control cable × 1
Audio connection cable × 1
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Connecting to Onkyo Separate Collection series components
This section introduces you to the other Separate Collection Series system components and their con-
venient system functions, followed by instruction on how to connect the system.
The following Separate Collection Series components are available:
• A-905TX ........... Integrated Stereo Amplifier
• T-405TX ............ Stereo tuner
• K-505TX ........... Stereo Cassette Tape Deck
• MD-105TX ........ Minidisc (MD) Recorder (Not available in U.S. and Canada)
• R-805TX ........... FM Stereo/AM Tuner Amplifier
• CDR-205TX ...... Audio CD recorder
Note that the available components may vary according to the area.
Combining the C-705TX Compact Disc player with the above system components enables you to
operate the following convenient functions:
• Auto Power On
– You can turn on the power to the amplifier by pressing the STANDBY/ON button on one of the
system components. (The amplifier’s POWER switch must be set to ON.)
– When the amplifier's POWER switch is set to ON, you can turn on the power to all the system
components simultaneously by pressing the STANDBY/ON button on the amplifier.
Afterwards, you can turn off the power to the individual components that are not in use.
Note: If an R-805TX has been connected to the system and the R-805TX’s energy save function
has been enabled, pressing the STANDBY/ON button of the C-705TX will not turn on the power to
the C-705TX. You need to press the STANDBY/ON button on the R-805TX. (Refer to the instruction
manual for the R-805TX for more information.)
• Direct Change
Press the following button on the component you want to operate. The amplifier will automatically
select the input from the corresponding component:
– The play button on the CD player, MD recorder, or stereo cassette tape deck; or
– The PRESET √/® buttons on the tuner.
• Remote Control Operation
You can operate all the system components using the remote controller supplied with the amplifier
A-905TX/R-805TX.
• Program Timer
You can operate the timer playback and recording functions using the T-405TX/R-805TX. (Refer to
the T-405TX/R-805TX instruction manual for more information.)
• Sleep Timer
You can fall asleep to a music/radio program using the timer. (Refer to the T-405TX/R-805TX instruc-
tion manual for more information.)
• CD Dubbing
Simple CD dubbing using a stereo cassette tape deck, MD recorder or CD recorder is possible with
the pressing of a single button. (Refer to the K-505TX, MD-105TX or CDR-205TX Instruction Manual
for more information).
• CD/MD/CDR Synchro Recording
When using a stereo cassette tape deck, MD recorder or CD recorder to record from the CD player,
you can record with simply starting on a CD player. (Refer to the K-505TX, MD-105TX or CDR-205TX
instruction manual for more information.)
• Dubbing a specific track from CD
You can specify a track on a CD and easily dub it to a connected MD recorder or CD recorder. (Refer
to the MD-105TX or CDR-205TX instruction manual for more information.)
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
Using the remote controller
• Place the unit away from strong light such as
direct sunlight or inverted fluorescent light which
can prevent proper operation of the remote
controller.
• Using another remote controller of the same
type in the same room or using the unit near
equipment which uses infrared rays may cause
operational interference.
• Do not put any object such as a book on the
remote controller. The buttons of the remote
controller may be pressed by mistake and drain
the batteries.
• Make sure the audio rack doors do not have
colored glass. Placing the unit behind such doors
may prevent proper remote controller operation.
• If there is any obstacle between the remote con-
troller and the remote control sensor, the re-
mote controller will not operate.
The unit is not shipped with a remote controller.
However, you can use a remote controller (RC-
456S) that is shipped with the A-905TX/R-805TX
amplifier.
Remote controller RC-456S
When the remote controller RC-456S supplied with
the amplifier A-905TX/R-805TX is used, operate
the remote controller pointing towards the
amplifier’s remote sensor.
Be sure to make the
connection securely. If
the connection is incomplete, you cannot use the
remote controller to operate the unit.
A-905TX /
R-805TX
Remote control
sensor
30°
30°
5m
C-705TX
RC-456S
Note
The DISC button on the RC-456S remote control-
ler cannot be used.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to the other components
Before connecting
• Do not connect the unit’s AC power cord to a wall outlet until you have completed all the other
connections.
• On each pair of connectors, a red connector (marked R) corresponds to the right channel, and a
white connector (marked L) to the left channel. Connect white plugs of audio connection cables to
L connectors and connect red plugs of audio connection cables to R connectors.
Audio connection cable
To L connectors
To R connectors
(White)
(Red)
(White)
(Red)
To L connectors
To R connectors
• Insert the plug securely. If the connection is incomplete, noise or malfunction may result.
Improper connection
Insert completely
• When you use a digital audio optical cable, do not bend it sharply nor coil it tightly.
• Bundling an audio connection cable with the power cord or speaker cord may degrade the sound
quality.
• To use the unit with the other Onkyo Separate Collection series components, follow the connection
diagram in the A-905TX/R-805TX instruction manual to connect the unit to the system.
Note:
The 230-240 V model is shown in the following illustrations.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
ANALOG
OUTPUT
AC OUTLET
L
AC 230-240V
UNSWITCHED
100W MAX.
50Hz
To wall outlet
REMOTE
CONTROL
Audio
connection
cable
R
DIGITAL OUTPUT
OPTICAL
1
2
"CLASS 1 LASER
PRODUCT"
3
cable
1
2
L
R
connector
DIGITAL IN
CD
Optional Optical
fiber cable
MD recorder, CD recorder,
DAT deck, etc.
Amplifier without
digital input terminal
1 Connection with the Amplifier
Connect the ANALOG OUTPUT connectors on the rear panel of C-705TX and the amplifier’s CD
input connectors using the audio connection cable. Refer to the amplifier’s instruction manual for
connections.
2 Connection to DIGITAL OUTPUT connector
Using the DIGITAL OUTPUT connector, you can record on digital audio equipment, such as an MD,
CD-R, DAT, etc. For digital recording, connect the equipment to either DIGITAL OUTPUT OPTICAL 1
or 2 connector using the optical cable (option). These connectors can also be used for connecting
an amplifier which is equipped with a digital input connector.
A connector protection cap is attached to the digital output connector. Re-
move this cap to connect the unit to other digital equipment. When you are
not using the digital output connector, replace this cap.
3 AC OUTLET (UNSWITCHED)
The AC power cord of another compo-
nent can be connected to this AC OUT-
LET connector.
ANALOG
OUTPUT
AC OUTLET
L
AC 230-240V
UNSWITCHED
100W MAX.
50Hz
REMOTE
CONTROL
R
DIGITAL OUTPUT
OPTICAL
1
2
"CLASS
1
LASER
This means that if the C-705TX is plugged
into an AC outlet, AC power is available
to this AC OUTLET even if the C-705TX is
off.
The shape and capacity of the AC outlet
may differ depending on the area of pur-
chase. Make sure that the capacity of other
components connected to this unit does
not exceed the capacity that is printed on
the rear panel.
PRODUCT"
230-240 V, 50 Hz models
120 V, 60 Hz models
Capacity is
100 watts.
Capacity is
120 watts.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to the other components
Connecting the
connector
Connecting the power cord
If you are using other ONKYO components equipped
with connectors, you can control these com-
Insert the AC power cord into a wall
outlet. The STANDBY indicator lights.
ponents using the amplifier‘s remote controller.
Before connecting
• The amplifier must be connected in the
system hookups for
• Each component has two
control operations.
connectors. There
To wall outlet
is no difference between those connectors.
• The components may be connected in any order.
• Remote control operation is not possible if only
STANDBY/ON
the
the
remote control cable is connected to
connectors. Connect the audio connec-
STANDBY
tion cables correctly.
The illustration below is the
hookup example.
Light
With these hookups, you can operate the CD Syn-
chro Recording (see “CD/MD synchro recording”
on page 8).
• To use the unit with the other Onkyo Sepa-
rate Collection series components, follow the
connection diagram in the A-905TX/R-805TX
instruction manual to connect the unit to the
system.
• If you press the (OPEN/CLOSE) button while
the unit is in the STANDBY mode, the power
will turn on and the display will light up auto-
matically.
Tuner
cable
Amplifier
Cassette Tape Deck
cable
Supplied
cable
C-705TX
REMOTE
CONTROL
Note
An
remote control cable equipped with a 1/
8 in. (3.5mm) diameter miniature two-conductor
phone plug is included with this unit and with ev-
ery tuner and cassette deck that bears the
mark.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Operations
Playing CDs
RC-456S
(Supplied with
A-905TX/R-805TX)
Disc tray
STANDBY/ ON
GRAPHIC EQ
EFFECT MODE
CLOCK
SLEEP
STANDBY/
ON
PRESET
TUNER INPUT
STANDBY/ON
FM
AM
TAPE
PAUSE/STEP
DVD
COMPACT DISC PLAYER
REPEAT SCROLL
M
D
TR-1
PLAY MODE CLEAR
REC
DUAL OPTICAL OUTPUT
REPEAT RANDOM
C
D
MEMORY CLEAR
REPEAT PLAY MODE
STANDBY/ON
DISC
REC
CDR
TONE
CLEAR
STANDBY
DISPLAY
MUTING
TIMER
1
4
2
5
8
3
6
9
C-705TX
UP/DOWN
ENTER
7
VOLUME
ACOUSTIC
PRESENCE
--/---
10
/0
REMOTE CONTROLLER RC-456
S
Normal play
5
Press the
button.
The CD player starts playing the first track
(track 1).
• When you are using the C-705TX with the A-
905TX/R-805TX Onkyo Separate Collection se-
ries component, turn the A-905TX’s/R-805TX’s
POWER switch ON.
Remote controller
1
Press STANDBY/ON button to turn
on the unit.
• If the
button is pressed when the unit is in
STANDBY mode, it turns on automatically then
starts playing the CD, if one is loaded in the
disc tray. Your amplifier also turns on if it is an
Onkyo A-905TX/R-805TX (refer to page 8).
The STANDBY indicator goes off, and the dis-
play will light up.
Remote controller
STANDBY/ON
STANDBY/ ON
If the CD player does not start playing when
STANDBY
the
button is pressed
• The disc may be upside down in the tray. Press
the button to open the disc tray. If you can-
not see the label on the disc, turn the disc over,
label side up.
2
Press the
to open the disc tray.
(OPEN/CLOSE) button
• Moisture may have formed inside the CD player.
Remove the CD from the disc tray and leave
the power on for about one hour to evaporate
the moisture.
Label side
To stop playing
Press the button.
Remote controller
3
4
Put the disc in the
disc tray, with its
label side facing up.
Press the button to close the disc
tray.
To pause playing
Press the button. (The PAUSE indicator lights.)
Note
To resume play, press the
or button.
You can skip this step by pressing the
but-
Remote controller
ton instead of the button. In this case, the
disc tray closes automatically and Track 1
starts playing.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing CDs
(Supplied with
RC-456S
COMPACT DISC PLAYER
STANDBY/ ON
CLOCK
GRAPHIC EQ
EFFECT MODE
SLEEP
A-905TX/R-805TX)
TR-1
PRESET
TUNER INPUT
FM
AM
DUAL OPTICAL OUTPUT
TAPE
PAUSE/STEP
DVD
STANDBY/ON
REPEAT SCROLL
M
D
PLAY MODE CLEAR
REC
STANDBY
DISPLAY
REPEAT RANDOM
C
D
MEMORY CLEAR
REPEAT PLAY MODE
DISC
REC
C-705TX
CDR
,
TONE
CLEAR
MUTING
TIMER
1
4
2
5
8
3
6
9
Number
buttons
UP/DOWN
ENTER
7
VOLUME
ACOUSTIC
PRESENCE
--/---
10
/0
,
REMOTE CONTROLLER RC-456
S
Starting playback from a given track
Search play
1
Select the track you wish to play
1
Hold down the
button during play.
or
using the
and
and
but-
tons (or the
buttons on
the remote controller).
Remote controller
2
Release your finger when the mu-
sic you would like to listen to is
reached.
2
Press the
button.
The CD player starts playing the selected track.
Remote controller
The music starts playing from that point.
Skip play
Each time the
ton on the remote controller) is pressed when a
disc is playing, the pickup will advance one track;
button (or the
but-
Using the remote controller
With the RC-456S remote controller (supplied with
the A-905TX/R-805TX), you can select the track
to play using the number buttons. In either case,
selecting a track automatically starts play of that
track.
and each time the
button (or the
button on the remote controller) is pressed when
a disc is playing, the pickup will go back one track.
Press these buttons until the desired track num-
ber is selected.
How to enter track numbers
To enter track #5 :
Remote controller
5
10
/0
To enter track #10 :
To enter track #21 :
--/---
2
1
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Checking the elapsed or remaining
time
Display information
The display changes each time you press the DIS-
PLAY button during play.
Before starting playback after you
have inserted a disc
a
SINGLE ELAPSED: Shows how long the cur-
a
The total number of tracks on the disc.
rent track has been playing.
b
A number appears on the display for every
track on the disc.
b
c
SINGLE REMAIN: Shows how much time is
left for the track currently playing.
For Track 21 or later tracks, the display shows
“_ _: _ _”.
TOTAL REMAIN: Shows how much playing
time is left for the entire disc.
a
b
1
6
2
7
3
8
4
9
5
During Memory play, this display shows the
playing time remaining for the entire sequence
of tracks programmed into memory.
Shows the track numbers.
• When the number of tracks exceeds 15, the >15
indicator lights.
d
After you have started playback
a
c
Shows how long the current track has been
DISPLAY
SINGLE ELAPSED
playing.
1
6
2
7
3
8
4
9
5
d
Tracks that have finished playing do not have
numbers displayed.
b
c
d
DISPLAY
SINGLE
REMAIN
1
6
2
7
3
8
4
9
5
5
5
SINGLE ELAPSED
1
6
2
7
3
8
4
9
5
c
DISPLAY
Checking the playing time of each
track
TOTAL REMAIN
1
6
2
7
3
8
4
9
Press the DISPLAY button when the unit is
stopped.
• Each time you press the
d
DISPLAY
1
6
2
7
3
8
4
9
or
button, the display shows the playing time of
the previous or next track, following the or-
der of the tracks on the CD.
Notes on the CD player time display
DISPLAY
In the following cases, the time display may indi-
cate “– – : – –” due to the memory limitations.
• If you switch to the remaining time display while
the CD player is playing the 21st or later song
on the disc
SINGLE
REMAIN
1
6
2
7
3
8
4
9
5
SINGLE
• If you switch to the total remaining time display
after storing the 21st or later song on the disc
• If you switch to the total remaining time display
after the CD player plays songs from memory
for more than 99 minutes 59 seconds, or
REMAIN
1
6
2
7
3
8
4
9
5
Note:
Press twice the DISPLAY button when the unit is • If you switch to the total remaining time display
stopped, the display shows the total remaining
time.
during random playback of a CD that contains
21 or more songs.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing CDs
(Supplied with
RC-456S
STANDBY/ ON
CLOCK
GRAPHIC EQ
EFFECT MODE
SLEEP
A-905TX/R-805TX)
PRESET
TUNER INPUT
FM
AM
TAPE
COMPACT DISC PLAYER
PAUSE/STEP
DVD
REPEAT SCROLL
M
D
TR-1
DUAL OPTICAL OUTPUT
PLAY MODE CLEAR
REC
TR-1
REPEAT RANDOM
C
D
RANDOM
STANDBY/ON
MEMORY CLEAR
REPEAT PLAY MODE
DISC
REC
CDR
STANDBY
DISPLAY
TONE
CLEAR
MUTING
TIMER
1
4
2
5
8
3
6
9
C-705TX
UP/DOWN
ENTER
7
VOLUME
ACOUSTIC
PRESENCE
--/---
10
/0
REMOTE CONTROLLER RC-456S
• To perform Random, Memory or Repeat play,
you need the following remote controller:
RC-456S (supplied with A-905TX/R-805TX am-
plifier)
Playing the first track only (TR-1
Play)
In this mode, the unit plays only the first track of
the disc then stops. The TR-1 Play mode is useful
for playing disc singles. You cannot use the re-
mote controller for this operation.
Playing tracks in random order
(Random play)
1
Press the TR-1 button.
The TR-1 indicator appears.
TR-1
1
Press the RANDOM button to enter
Random play mode.
The CD player plays the tracks in a random
order.
TR-1
RANDOM
2
Press the
button.
The unit starts playing the first track of the
disc.
1
6
2
7
3
8
4
9
5
10
RANDOM
11 12
• Random play will be canceled when the RAN-
DOM, (OPEN/CLOSE) or button is pressed,
or when all tracks on disc have been played.
• Random play can be performed in conjunction
with Memory and Repeat modes.
To quit TR-1 play
Press the TR-1 button again.
TR-1
16
Download from Www.Somanuals.com. All Manuals Search And Download.
(Supplied with
RC-456S
STANDBY/ ON
CLOCK
GRAPHIC EQ
EFFECT MODE
SLEEP
A-905TX/R-805TX)
PRESET
TUNER INPUT
FM
AM
TAPE
PAUSE/STEP
DVD
CLEAR
REPEAT SCROLL
M
C
D
D
PLAY MODE CLEAR
REC
REPEAT RANDOM
MEMORY CLEAR
REPEAT PLAY MODE
DISC
REC
MEMORY
CDR
TONE
CLEAR
MUTING
TIMER
1
4
2
5
8
3
6
9
Number
buttons
UP/DOWN
ENTER
7
VOLUME
ACOUSTIC
PRESENCE
--/---
10
/0
REMOTE CONTROLLER RC-456
S
How to enter track numbers
Memory play
5
To enter track #5 :
• Up to 25 tracks can be stored in memory.
To enter track #10 :
To enter track #21 :
10/0
1
Press the MEMORY button to enter
Memory play mode.
--/---
2
1
MEMORY
MEMORY
Display information
Example: Tracks 2, 7, 10, 11 and 5 are stored in
memory
(Before starting Memory play)
2
3
Press the number button(s) to se-
lect your desired track.
a
The last track number stored in memory is
shown on the display.
To enter further track numbers into memory,
repeat this step.
b
c
Track numbers in memory are shown.
MEMORY indicator appears to indicate that
you are in Memory play mode.
Press the
button.
a
c
b
The track in memory are played in the order
you specified.
MEMORY
2
7
5
10
11
To clear the last track stored
Note
Press the CLEAR button.
• If more than 25 tracks are already in memory,
“FULL” will light on the time display to indicate
that the memory is full.
The last track you stored into memory is cleared.
CLEAR
• If the MEMORY button is pressed during play,
the currently playing track is stored into memory.
To stop Memory play
Press the button.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing CDs
(Supplied with
A-905TX/R-805TX)
RC-456S
STANDBY/ ON
CLOCK
GRAPHIC EQ
EFFECT MODE
SLEEP
PRESET
TUNER INPUT
FM
AM
TAPE
PAUSE/STEP
DVD
REPEAT SCROLL
M
D
PLAY MODE CLEAR
REC
REPEAT
REPEAT RANDOM
C
D
MEMORY CLEAR
REPEAT PLAY MODE
DISC
REC
MEMORY
CDR
TONE
CLEAR
MUTING
TIMER
1
4
2
5
8
3
6
9
UP/DOWN
ENTER
7
VOLUME
ACOUSTIC
PRESENCE
--/---
10
/0
REMOTE CONTROLLER RC-456
S
To quit Memory play
Press the MEMORY or (OPEN/CLOSE) button.
The MEMORY indicator disappears to indicate that
you are in Normal play mode.
2
Press the
play.
button to start Repeat
The contents of the memory are completely
cleared.
• When the last track is completed, the CD
player returns to the beginning of the disc
and plays all the tracks on the disc again.
• Repeat play can be performed in conjunc-
tion with Normal, Memory, Random, and
TR-1 play modes. The REPEAT button can
be pressed even when a track is playing.
MEMORY
Playing all tracks on disc (Repeat
play)
Play mode Repeated tracks
TR-1
1st track only
Normal
Memory
Random
All tracks on disc
1
Press the REPEAT button to enter
Repeat play mode.
Tracks in memory (in stored order)
Repeats random play of all tracks
on disc.
The REPEAT indicator lights.
REPEAT
To quit Repeat play
Press the REPEAT or button.
The REPEAT indicator disappears to indicate that
you are in Normal play mode.
1
6
2
7
3
8
4
9
5
10
REPEAT
11 12
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Handling CDs
Playable discs
Taking the CD out of the disc
case
This unit can play back the following discs.
Disc
size
Maximum
Disc
mark
1
Hold the disc case in the palm of
one hand and pull the cover up-
ward with the other hand to open
the disc case.
Contents
playback time
12 cm
74 minutes
20 minutes
Audio
CDs
Audio
8 cm
(CD single)
You cannot play back discs other than those listed
above.
Do not play CD-ROMs intened for computer use
or non-audio compact discs. Doing so may cause
high-pitched noises or other unpredictable results
that may damage speakers, amplifiers, and other
connected components.
2
While pushing on the center grip
of the disc case with your finger,
take out the disc by holding its
edges.
Avoid using heart-shaped or octagonal discs. Play-
ing irregularly shaped discs may damage the in-
ternal mechanism of the unit.
Do not use discs on which adhesive from adhesive
tape or a disc label (if it is a rental disc) remains.
Otherwise, you may not be able to eject the discs
or the unit may become inoperative.
Important notes on handling CDs
• Carefully lift the disc from the disc case, mak-
ing sure to only hold the disc by its edges or the
hole in the middle.
• A dry, soft cloth may be used to wipe dust and
fingerprints off the surface of CDs.
• Do not use volatile agents on discs, such as thin-
ner or benzine. Also, do not use conventional
record cleaner or antistatic agents.
• Do not place a CD in direct sunlight or locations
subject to high humidity or low temperature.
• Do not store a CD in the CD player tray for long
periods of time.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
If you have any problems with the unit, please check the troubleshooting table below first.
For any problems not covered in the table, please consult your nearest Onkyo authorized service center.
Symptom
Cause
Remedy
STANDBY/ON button is
pressed, but power does not
come on.
• Power cord plug is not properly con- • Insert the plug firmly.
nected to AC outlet.
• The R-805TX’s energy save function • Press the R-805TX’s STANDBY/ON but-
is enabled (when the R-805TX is con-
nected).
ton. The power to the C-705TX will
be turned on.
Disc is loaded in the disc tray,
but playback will not begin.
• Disc is in the disc tray upside down. • Load the disc with the label facing
upward.
• Disc is dirty.
• Clean the disc.
• Moisture has accumulated inside the
CD player.
•
Remove the disc from the disc tray, place
the CD player in a warm place and leave
the power on for about one hour.
• You are playing an incorrectly-re-
corded CD-R.
• Replace the disc.
No sound
• Incomplete or incorrect connections.
• Check all cable connections. (See
pages 10-12)
• Insert all plugs firmly into jacks.
• Improper input selector switch setting • Set switch to proper position. See your
on amplifier.
amplifiers operating instructions for
more information.
Disc skipping
• Clean the disc. (See page 19)
• Replace the disc.
• Disc is dirty.
• Disc is scratched.
• CD player has been bumped.
• Place the CD player in a more stable
location.
Search time (when moving to
a specific track) is extremely
long.
• Clean the disc. (See page 19)
• Replace the disc.
• Disc is dirty.
• Disc is scratched.
• Load a disc into the tray.
Track numbers cannot be
stored in the memory.
• No disc in the tray.
• Use only the track numbers on the
disc.
• A track number not on the disc is
being input.
• Turn off the TV, or move the unit far-
ther from the TV.
Noise during play
• Interference from TV
• Replace the batteries.
Remote controller does not
function.
• Battery level is low.
• Remote controller is possible within a
distance of approximately 5 meters
from the unit’s sensor and a detection
range of 30°.
• Your position is too far from the unit’s
remote control sensor or out of the
sensor’s detection angle.
• Operate from a different position or
remove the obstacle.
• An obstacle exists between you and
the unit’s remote control sensor.
• Connect the system components
properly according to the A-905TX/R-
805TX instruction manual.
• The system components are not con-
nected properly.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Indexed to parts and controls
For operational instructions, refer to the page indicated in parentheses.
Front panel
Button
(Open/Close)
[13, 18]
Disc tray [13]
STANDBY/ON
button [13]
TR-1 button [16]
COMPACT DISC PLAYER
TR-1
DUAL OPTICAL OUTPUT
button (Stop)
[13]
STANDBY/ON
STANDBY
button (Play)
[13, 14, 16, 17, 18]
DISPLAY
C-705TX
STANDBY
indicator [12]
,
button
(Track down/Fast reverse,
Track up/Fast forward) [14, 15]
DISPLAY button [15]
button (Pause) [13]
Display
Elapsed/Remaining
time indicator
Pause indicator Memory indicator TR-1 indicator
-
1
MEMORY
TR
SINGLE ELAPSED
TOTAL REMAIN
REPEAT
1
6
2
7
3
8
4
9
5
10
11 12 13 14 15
15
RANDOM
Over indicator
Multi-purpose
display
Music calendar
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Indexed to parts and controls
Remote controller
Remote controller supplied with the A-905TX/R-805TX (RC-456S)
To operate the supplied remote controller, make the appropriate connection to the
nectors.
remote con-
RC-456S
STANDBY/ ON
CLOCK
GRAPHIC EQ
EFFECT MODE
SLEEP
FM
STANDBY/ON button [13]
TUNER INPUT
PRESET
AM
TAPE
PAUSE/STEP
DVD
M D
REPEAT SCROLL
PLAY MODE CLEAR
REC
REPEAT RANDOM
C D
CDR
CD player operation buttons
MEMORY CLEAR
REPEAT PLAY MODE
DISC
REC
REPEAT : Repeat mode button [18]
RANDOM : Random play button [16]
: Stop button [13, 17]
TONE
CLEAR
MUTING
TIMER
1
4
2
5
8
3
6
9
: Pause button [13]
UP/DOWN
ENTER
Number buttons [14, 17]
1~9, 10/0 : Number buttons
--/--- : Ten‘s hold button
: Play button [13, 14, 17, 18]
MEMORY : Memory button [17, 18]
CLEAR : Clear button [17]
7
VOLUME
ACOUSTIC
PRESENCE
--/---
10
/0
-
REMOTE CONTROLLER RC 456
S
DISC : Disc button (can not be used.)
: Track down button [14]
: Track up button [14]
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Signal readout system : Optical non-contact
Wow and Flutter :
Below threshold of measurability
Reading rotation : About 500 – 200 r.p.m.
(constant linear velocity)
Output level : 2 volts r.m.s.
Linear velocity : 1.2 –1.4 m/s
Power consumption :
230-240 V, 50 Hz model : 8 watts
120 V, 60 Hz model : 9 watts
Power supply rating :
Error correction system :
Cross Interleave Reed Solomon code
D/A converter : 1 bit D/A converter
AC 230-240 V, 50 Hz
AC 120 V, 60 Hz
Sampling frequency : 352.8 kHz
(Eight-times oversampling)
Dimensions (W x H x D) :
205 x 91 x 275 mm
Number of channels : 2 (stereo)
Frequency response : 5 Hz – 20 kHz
Total harmonic distortion : 0.005% (at 1 kHz)
Dynamic range : 96 dB
8-1/16" x 3-9/16" x 10-3/16"
Weight : 2.2 kg, 4.9 lbs.
Signal to noise ratio : 90 dB
Specifications and external appearance are subject to
change without notice because of product improvements.
Channel separation : 85 dB (at 1 kHz)
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN
Tel: 072-831-8111 Fax: 072-833-5222
ONKYO U.S.A. CORPORATION
18 Park Way, Upper Saddle River, N.J. 07458, U.S.A.
ONKYO EUROPE ELECTRONICS GmbH
Industriestrasse 20, 82110 Germering, GERMANY
ONKYO CHINA LIMITED
Units 2102-2107, Metroplaza Tower I, 223 Hing Fong Road, Kwai Chung,
N.T., HONG KONG Tel: 852-2429-3118 Fax: 852-2428-9039
HOMEPAGE
Printed in Japan
E
SN 29343082
I0103-1
Download from Www.Somanuals.com. All Manuals Search And Download.
|