One for All Universal Remote URC 9800 User Manual
URC 9800  
Home Producer  
User Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
5
Feature  
Function  
USING YOUR HOME PRODUCER  
The SETUP key is used to access  
the menu and program your  
Home Producer.  
Features and Functions  
The illustration below and the chart on the next two  
pages describe the features and the functions of the  
Home Producer’s keypad. The following keys will  
always have the same function, regardless of which  
component you are controlling. For an explanation of  
what each key does by component type, please use  
the index at the rear of the manual (pages 52 to 64).  
The TV, VCR, DVD, CBL/SAT,  
TUNER, AMP, CD, and AUX1 keys  
are used to select the home enter-  
tainment component you want to  
control. If your component does not  
respond when you press a key on  
the remote control, press the TV,  
VCR, DVD, CBL/SAT, TUNER,  
AMP, CD, or AUX1 key to tell the  
remote control which component you  
would like to operate.  
The HOME THEATER key is used  
to select the Home Theater mode of  
the Home Producer.  
The ESC (Escape) key is used to  
exit the LCD Screen menu.  
The LITE key is used to turn ON  
and OFF the Home Producer’s  
backlit keypad and LCD screen.  
Press the LITE key once to turn  
ON the backlight. The Home  
Producer’s backlight will stay on for  
5 seconds after the last key press  
and re-activates with the press of a  
key. To de-activate the backlight,  
press the LITE key again.  
The POWER key controls power ON  
and OFF.  
The VOL + (Volume Up), VOL –  
(Volume Down) and MUTE keys  
control the volume the same as the  
Volume Up and Down and Mute  
keys on your original remote.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
7
SETTING THE CLOCK  
Feature  
Function  
To set up the CLOCK/TIME on the display screen:  
The CH + (Channel Up) and CH –  
(Channel Down) keys change  
channels the same as the Channel  
Up and Down keys on your  
original remote.  
1
Press and hold SETUP until the  
display screen changes from  
[DEVICE and the TIME] to  
[TIMED SEQ].  
The MACRO and MACRO2 keys  
memorize up to 15 keystrokes that  
can be accessed in sequence at the  
press of a single key. These  
2
x2 Press the MENU – key twice, the  
display will change to [CONFIGURE].  
Press SELECT, the display will  
change to [THEATR SEL].  
keys are not mode specific.  
The SHIFT key accesses advanced  
features that are mapped under the  
following keys: CENTER, MENU,  
SELECT, MUTE, PREV CH,  
PIP, REW, PLAY, FF, STOP, and  
PAUSE.  
3
Press MENU – one time, the display  
will change to [TIME SETUP].  
Press SELECT again.  
The 1L ~ 6L keys are used for  
learning new features onto the  
Home Producer. See pages 32 to 33  
for further details.  
4 0 - 9  
The display will change to [TIME]  
and the first digit in the time will  
blink. Enter either a 0 or a 1, then  
the next digit in the time will begin  
to blink, continue entering the time  
until all four digits of the time have  
been set.  
5
6
After the time has been set, AM/PM  
will then blink. Press MENU – to  
toggle between AM and PM, once  
AM or PM is selected, press  
SELECT.  
NOTE: For a detailed explanation of what function each key will  
perform by device type (e.g.,TV, VCR, CBL/SAT,etc.), please refer  
to pages 52 through 64.  
The display will then change to the  
day of the week (i.e., MON, TUE,  
WED, THU, FRI, SAT or SUN). Use  
MENU – to toggle through the days  
until the proper day of the week is  
displayed on the screen, then press  
SELECT. The display will return to  
the [DEVICE and the TIME] screen  
with the correct time on the display.  
NOTE: After changing the batteries, you will have to reprogram  
the clock.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
9
7
Continue to enter your codes as  
illustrated in Steps 5 and 6 until the  
Home Producer is operating all of  
your home entertainment  
components. Once you have fin-  
ished setting up your components,  
QUICK SET-UP  
To Quickly Set Up the Home Producer to  
Operate Your Home Entertainment Components  
NOTE: If the four-digit code for your device begins with a “0”, only  
the last three numbers of your code will be displayed.  
press ESC to return to the [DEVICE  
and TIME] display.  
1
2
3
Turn on all of the components that  
you will be setting up.  
If you would like to set up each of your  
components individually, or if you purchase a  
component after you have set up the A/V Home  
Producer, go to the “SETTING UP INDIVIDUAL  
HOME ENTERTAINMENT COMPONENTS”  
section on pages 10 to 23 in this manual.  
Press and release the TV key.  
Press and hold SETUP until the  
display screen changes from  
[TV and the TIME] to [TIMED SEQ].  
Set Up Codes for TVs ...................................Page 10  
Set Up Codes for VCRs ................................Page 13  
Set Up Codes for TV/VCR Combinations .....Page 14  
Set Up Codes for Cable Boxes .....................Page 16  
Set Up Codes for DSS and  
4
5
Press the MENU – key one time.  
The display screen will change to  
[CODE SETUP]. Press SELECT.  
The display will change to  
Satellite Receivers..................................Page 17  
Set Up Codes for DVD or LD Players ...........Page 19  
Set Up Codes for CD or MD Players ............Page 20  
Set Up Codes for Tuner/Receivers................Page 22  
Set Up Codes for Amplifiers......................... Page 23  
[DEV SET UP]. Press SELECT. The  
display will change to [TV].  
Enter the first TV code listed for your  
brand in the “Set Up Codes for TVs”  
on pages 10-12, then press  
SELECT. Point the remote control at  
the TV and press POWER.Your  
Television should turn OFF. If your TV  
does not turn OFF, enter the  
next code in the code list then press  
SELECT followed by POWER again.  
Once your TV turns OFF, press VCR.  
You will now enter your VCR code.  
6
Enter the first VCR code listed for  
your brand in the “Set Up Codes for  
VCRs” on pages 13-14, then press  
SELECT. Point the remote control at  
the VCR and press POWER.Your  
VCR should turn OFF. If your VCR  
does not turn OFF, enter the next  
code in the code list then press  
SELECT followed by POWER again.  
Once your VCR turns OFF, press  
CBL/SAT.You will now enter your  
Cable Box code.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10  
11  
Set Up Codes for TVs (cont.)  
SETTING UP INDIVIDUAL HOME  
ENTERTAINMENT COMPONENTS  
Kaypani  
0052  
Bell & Howell 0154, 0016  
Kenwood  
Kloss  
LG  
0030, 0019  
0024, 0046  
0056  
0047, 0054, 0017, 0154,  
0156, 0178, 1347  
0016  
Beuamark  
Bradford  
Brockwood  
Broksonic  
CCE  
0017, 0030, 0179  
0180  
0019  
0236, 0463, 0003  
To Set Up Your Television:  
LXI  
NOTE: If the four-digit code for your device begins with a “0”, only  
the last three numbers of your code will be displayed.  
0217  
Logik  
Luxman  
MEI  
MGA  
MTC  
CXC  
0180  
0056  
0185  
Candle  
0030, 0056, 0046, 0186  
1
2
3
Turn on your TV.  
Capehart  
Carnivale  
Carver  
0052  
0030  
0054  
0150, 0030, 0178, 0019  
0060, 0030, 0019, 0056,  
0185  
0054, 0030, 0179, 0020,  
0024, 0096, 0186, 0187,  
0386, 0171  
0016  
0054, 0030  
0051, 0250  
0178, 0145, 0003  
0154, 0250, 0150, 0060,  
0178, 0056, 0016  
0047, 0017, 0051, 0039,  
0032, 0135  
Press and release the TV key.  
Celebrity  
Cineral  
Citizen  
0000  
Magnavox  
0451, 0092  
0060, 0030, 0056, 0039,  
0046, 0092, 0186, 0280  
0185  
0056  
0180, 0157, 0185  
0180  
Press and hold SETUP until the  
display screen changes from  
Majestic  
Marantz  
Matsushita  
Megatron  
Memorex  
Clairtone  
Concerto  
Contec  
Craig  
[TV and the TIME] to [TIMED SEQ].  
Crosley  
Crown  
0054  
0180, 0039  
4
Press the MENU – key one time.  
The display screen will change to  
[CODE SETUP]. Press SELECT.  
The display will change to  
[DEV SET UP].  
Midland  
Curtis Mathes 0047, 0054, 0154,  
0051,0451, 0093, 0060,  
0030, 0145, 0056, 0016,  
0039, 0166, 0466, 1147,  
1347  
Minutz  
Mitsubishi  
Motorola  
Multitech  
NAD  
NEC  
NTC  
Nikko  
0021  
0093, 0150, 0178, 0019  
0093, 0055  
0180, 0217  
0156, 0178, 0166  
0030, 0019, 0056, 0497  
0092  
0047, 0017, 0154, 0156,  
0030, 0178, 0092, 1347  
0018  
Daewoo  
0451, 0019, 0039, 0092,  
0623, 0624  
5
6
Press SELECT and the display  
screen will change to [TV].  
Daytron  
0019, 0039  
Denon  
0145  
Dumont  
0017, 0019  
Dwin  
0720, 0774  
Noshi  
Onwa  
Optimus  
Optonica  
Orion  
Dynatech  
Electroband  
Electrohome  
Emerson  
0217  
0000, 0185  
0381  
0154, 0236, 0463, 0180,  
0282, 0178, 0019, 0179,  
0039, 0038, 0177, 0185,  
0280, 0623, 0624  
0030  
Enter the first TV code listed for your  
brand in the “Set Up Codes for TVs”  
on pages 10-12, then press SELECT.  
0180  
0154, 0250, 0166  
0093, 0165  
0236, 0463, 0179  
0047, 0054, 0154, 0156,  
0051, 0250, 0093, 0165,  
0150, 0060, 0053, 0178,  
0145, 0055, 0001, 1347  
0047, 0156, 0051, 0060,  
0030, 0178, 0021, 0019,  
0018, 0056, 0039, 0003,  
0027, 0032, 0135, 1347  
0054, 0463, 0030, 0145,  
0019, 0020, 0024, 0096,  
0186, 0187  
0054, 0017, 0000, 0021,  
0019, 0018, 0039, 0020,  
0024, 0027, 0052, 0171  
0030, 0019, 0039  
0038, 0166  
0019, 0039, 0092  
0051  
0047, 0030, 1347  
0178, 0003, 0052, 0466  
0017, 0019  
0051, 0250, 0165, 0055  
0047, 0051, 0093, 0019,  
0018, 0038, 0090, 0135,  
1047, 1147, 1247, 1347  
0047, 0154, 0165, 0180,  
0030, 0178, 0019, 0056,  
0039, 0032  
0154, 0165, 0180, 0030,  
0178, 0019, 0056, 0039,  
0032  
Panasonic  
7
Aim the remote control at the TV and  
press POWER.Your TV should turn  
OFF. Press ESC to return the display  
to [TV and the TIME]. If your TV does  
not turn OFF, enter the next code in  
the code list then press SELECT fol-  
lowed by POWER again. Once the  
correct code is entered, press ESC to  
return the display to [TV and TIME].  
Envision  
Fisher  
0154, 0159  
Penney  
Fujitsu  
Funai  
Futuretech  
GE  
0179  
0180, 0179, 0171  
0180  
0047, 0051, 0451, 0093,  
0282, 0178, 0021, 0055,  
0027, 0135, 1147, 1347  
0017, 0030, 0019  
0060  
0030, 0178, 0019, 0056,  
0039, 0001, 0032  
0053, 0056  
Philco  
Philips  
Gibralter  
Go Video  
GoldStar  
Pilot  
Gradiente  
Grunpy  
For a detailed explanation of what function each key  
will perform in the TV mode, please refer to page 52  
in the Key Index.  
Pioneer  
Portland  
Prism  
Proscan  
Proton  
Pulsar  
Quasar  
RCA  
0180, 0179  
Hallmark  
0178  
Harley Davidson 0179  
Harman/Kardon 0054  
Harvard  
Hitachi  
0180  
Set Up Codes for TVs  
0145, 0056, 0032, 0038,  
0151  
A-Mark  
AOC  
0003  
Ambassador  
Ampro  
0177  
0751  
0180  
Infinity  
Inteq  
JBL  
0054  
0017  
0054  
0030, 0019, 0003, 0052  
0185  
Anam  
Abex  
0032  
Anam National 0055  
Radio Shack  
Realistic  
JCB  
0000  
Admiral  
Adventura  
Aiko  
0093  
0046  
0092  
Archer  
Audiovox  
0003  
JVC  
0053  
0451, 0180, 0003, 0092,  
Janeil  
KEC  
KTV  
0046  
0180  
0623  
0060  
0180  
0019  
Akai  
Alaron  
Allegro  
0030  
0179  
0720, 0774  
Aumark  
Baysonic  
Belcor  
0180, 0030, 0039, 0185,  
0217, 0280  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12  
13  
6
Enter the first VCR code listed for  
your brand in the “Set Up Codes for  
VCRs” below or “Set Up Codes for  
TV/VCR Combinations” on the next  
page, then press SELECT. Aim the  
remote control at the VCR and press  
POWER or PLAY.Your VCR should  
turn OFF or start to play. Press the  
ESC key to return the display to [VCR  
and the TIME]. If your VCR does not  
turn OFF or start to play, enter the  
next code in the code list then press  
SELECT followed by POWER or  
PLAY again. Once the correct code is  
entered, press the ESC key to return  
the display to [VCR and the TIME].  
Set Up Codes for TVs (cont.):  
Symphonic  
TMK  
0171  
0178, 0056, 0177  
0093  
0055, 0003  
0047, 0017, 0051, 0250,  
1347  
Rhapsody  
Runco  
0185  
0017, 0030, 0497, 0603  
Tandy  
SSS  
0180, 0019  
Tatung  
Technics  
Sampo  
Samsung  
0030, 0039, 0032, 0052  
0060, 0030, 0178, 0019,  
0056, 0039, 0032  
Technol Ace  
Techwood  
Teknika  
0179  
Samsux  
Sansei  
Sansui  
Sanyo  
0039  
0451  
0463  
0154, 0146, 0159  
0051, 0056, 0003  
0054, 0180, 0150, 0060,  
0019, 0179, 0056, 0016,  
0039, 0092, 0186  
0056  
0154, 0156, 0060  
0185  
0039  
or  
Scimitsu  
Scotch  
Scott  
0019  
0178  
Telefunken  
Toshiba  
Tosonic  
Totevision  
Trical  
0236, 0180, 0178, 0019,  
0179  
0047, 0054, 0154, 0156,  
0178, 0179, 0056, 0146,  
Sears  
0157  
0021, 0027  
Universal  
0159, 0171  
Vector Research 0030  
Victor  
Semivox  
Semp  
0180  
0156  
0053  
0054  
0178, 0019  
0046  
0054, 0156, 0165, 0030,  
0178, 0021, 0019, 0179,  
0056, 0016, 0020, 0027,  
0080, 0096, 0111, 0135,  
0187  
Vidikron  
Vidtech  
Viking  
Sharp  
0093, 0165, 0039, 0157,  
0386  
0019  
Shogun  
For a detailed explanation of what function each  
key will perform in the VCR mode, please refer to  
page 54 in the “Key Index”.  
Wards  
Signature  
Simpson  
Sony  
0016  
0186, 0187  
0000, 0080, 0111  
Soundesign  
Spectricon  
Squareview  
Starlite  
0180, 0178, 0179, 0186  
0003  
0171  
0180  
Set Up Codes For VCRs  
White  
Westinghouse 0623, 0624  
Admiral  
Adventura  
Aiko  
Aiwa  
Akai  
0048  
0000  
0278  
Garrard  
Go Video  
GoldStar  
Gradiente  
HI-Q  
0000  
Yamaha  
Zenith  
Zonda  
0030, 0019  
0017, 0016, 0092, 0146  
0003  
Supre-Macy  
Supreme  
Sylvania  
0046  
0000  
0432, 0526  
0037, 0038  
0000, 0008  
0047  
0054, 0030, 0020, 0024,  
0096, 0186, 0187, 0381  
0037, 0000, 0307  
0041, 0061, 0106  
American High 0035  
Harley Davidson 0000  
Asha  
Audiovox  
Beaumark  
Bell & Howell 0104  
Broksonic  
0240  
0037  
0240  
Harman/Kardon 0081, 0038  
Harwood  
Headquarter  
Hitachi  
JVC  
Jensen  
KEC  
0072, 0068  
0046  
0000, 0042, 0041, 0105  
0067, 0041, 0008  
0041  
To Set Up Your VCR or TV/VCR Combinations:  
NOTE: If the four-digit code for your device begins with a “0”, only  
the last three numbers of your code will be displayed.  
0184, 0121, 0209, 0002,  
0295, 0479  
0072, 0278  
0037  
CCE  
Calix  
0037, 0278  
0072  
1
2
3
Turn on your VCR and insert a tape.  
KLH  
Canon  
Capehart  
Carver  
Cineral  
Citizen  
Colt  
0035  
0020  
0081  
0278  
Kenwood  
Kodak  
LXI  
Lloyd’s  
Logik  
0067, 0041, 0038, 0046  
0035, 0037  
0037  
0000, 0208  
0072  
Press and release the VCR key.  
0037, 0278  
0072  
0037, 0047, 0240, 0072,  
0271  
Press and hold SETUP until the  
display screen changes from  
[VCR and the TIME] to [TIMED SEQ].  
MEI  
MGA  
0035  
0240, 0043, 0061  
Craig  
MGN Technology 0240  
MTC  
Curtis Mathes 0060, 0035, 0041, 0162  
0240, 0000  
Cybernex  
Daewoo  
Daytron  
Denon  
Dynatech  
Electrohome  
Electrophonic 0037  
Emerex  
Emerson  
0240  
Magnasonic  
Magnavox  
0278, 0593  
0035, 0039, 0081, 0000,  
0149, 0110  
0240  
0035, 0081, 0038  
0037  
0035, 0162, 0454  
0035, 0037, 0048, 0039,  
0047, 0240, 0000, 0104,  
0046, 0307, 1037, 1162,  
1262  
0042, 0105  
0048, 0067, 0043, 0061  
0035, 0048  
4
5
Press the MENU – key one time.  
The display screen will change to  
[CODE SETUP]. Press SELECT.  
The display will change to  
[DEV SET UP].  
0045, 0278, 0020, 0561  
0020  
0042  
0000  
0037  
Magnin  
Marantz  
Marta  
Matsushita  
Memorex  
0032  
0037, 0184, 0000, 0121,  
0043, 0209, 0002, 0278,  
0036, 0061, 0068, 0208,  
0212, 0295, 0479, 0561  
0047, 0104, 0054, 0066  
0035, 0033  
Press SELECT and the display  
screen will change to [VCR].  
Minolta  
Mitsubishi  
Motorola  
Multitech  
NAP  
Fisher  
Fuji  
Funai  
GE  
0000  
0000, 0072  
0035, 0037, 0039, 0042,  
0033, 0034, 0066, 0105  
0060, 0035, 0048, 0240,  
0202  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14  
15  
Set Up Codes For VCRs (Cont.)  
To Set Up Your Cable Box:  
Sansui  
0000, 0067, 0041, 0271,  
0479  
0047, 0240, 0104, 0046  
0184, 0045, 0121, 0043,  
0210, 0212  
0035, 0037, 0047, 0000,  
0042, 0104, 0046, 0054,  
0066, 0105  
0045  
0048, 0062  
0072  
0240  
NEC  
0104, 0067, 0041, 0038,  
0040  
0037  
0034, 0253  
0240  
NOTE: If the four-digit code for your device begins with a “0”, only  
the last three numbers of your code will be displayed.  
Sanyo  
Scott  
Nikko  
Nikon  
Noblex  
Olympus  
Optimus  
1
2
3
Turn on your Cable Box.  
Sears  
0035  
Press and release the CBL/SAT key.  
0037, 0048, 0104, 0162,  
0432, 0454, 0593, 1048,  
1062, 1162, 1262  
0062  
0184, 0002, 0295, 0479  
0035, 0162, 0077, 0225,  
0454, 1162  
0035, 0037, 0240, 0042,  
0038, 0040, 0054  
0042, 0105  
0035, 0209, 0479  
0035, 0081, 0062, 0110  
0037  
0067  
0020  
0240  
0060, 0202  
0072  
0039  
0046  
0046  
0035, 0162, 0077, 0454,  
1162  
0060, 0035, 0048, 0240,  
0042, 0149, 0077, 0105,  
0106, 0202  
0000, 1037  
0037  
0037  
0035, 0037, 0048, 0047,  
0000, 0104, 0062, 0046,  
0066  
0034, 0253  
0039  
0042  
0240, 0045  
0048, 0039  
Semp  
Sharp  
Shintom  
Shogun  
Signature  
Singer  
Press and hold SETUP until the  
display screen changes from  
[CABLE and the TIME] to  
[TIMED SEQ].  
Optonica  
Orion  
Panasonic  
0035  
0072  
Penney  
Sony  
0035, 0032, 0000, 0033,  
0034, 0253  
0253  
0035, 0081, 0000, 0043,  
0110  
0000, 0593  
0240, 0036, 0208  
0041  
0000, 0041  
0060, 0035, 0039, 0162,  
0202  
0035, 0037, 0000  
0000  
Pentax  
Philco  
Philips  
Pilot  
Pioneer  
Portland  
Profitronic  
Proscan  
Protec  
Pulsar  
Quarter  
Quartz  
Quasar  
Sunpak  
Sylvania  
4
Press the MENU – key one time.  
The display screen will change to  
[CODE SETUP]. Press SELECT.  
The display will change to  
[DEV SET UP].  
Symphonic  
TMK  
Tatung  
Teac  
Technics  
5
6
Press SELECT and the display  
screen will change to [CABLE].  
Teknika  
Thomas  
Toshiba  
0045, 0043, 0066, 0210,  
0212  
0037, 0240  
0240  
0045  
Enter the first Cable Box code listed  
for your brand in the “Set Up Codes  
for Cable Boxes” on page 16, the  
press SELECT.  
Totevision  
Unitech  
Vector  
Vector Research 0038, 0040  
Video Concepts 0045, 0040, 0061  
RCA  
Radio Shack  
Radix  
Randex  
Videosonic  
Wards  
0240  
0060, 0035, 0048, 0047,  
0081, 0240, 0045, 0000,  
0042, 0072, 0149, 0062,  
0212  
Realistic  
7
Point the remote control at the Cable  
Box and press POWER.Your Cable  
Box should turn OFF. If your Cable  
Box turns OFF, press the ESC key  
to return the display to [CABLE and  
the TIME]. If your Cable Box does  
not turn OFF, enter the next code in  
the code list then press SELECT fol-  
lowed by POWER again. Once the  
correct code is entered, press the  
ESC key to return the display to  
[CABLE and the TIME].  
Ricoh  
Runco  
STS  
Samsung  
Sanky  
W. Westinghouse 0278  
XR-1000  
Yamaha  
Zenith  
0035, 0000, 0072  
0041, 0038  
0039, 0000, 0033, 0034,  
0479  
Set Up Codes for TV/VCR Combinations:  
Panasonic  
Penney’s  
Quasar  
0035 (TV = 0051),  
0162 (TV = 0250)  
0035 (TV = 0051), 0240,  
0162 (TV = 0250)  
0035 (TV = 0051), 0162  
(TV = 0250)  
0035 (TV = 0051), 0060  
(TV = 0047),  
0048 (TV = 0093)  
0000, 0479  
0240  
0000, 0037  
0032 (TV = 0000)  
0000  
0000  
American High 0035 (TV = 0051)  
Brocksonic  
Colt  
0002, 0294, 0479  
0072  
Curtis Mathes 0035 (TV = 0051)  
Daewoo  
Emerson  
Funai  
0278 (TV = 0451)  
0002, 0294, 0479  
0000  
0035 (TV = 0051),  
0060 (TV = 0047),  
0048 (TV = 0093), 0240  
0035 (TV = 0051), 0000  
0000  
RCA  
NOTE: If your original Scientific Atlanta remote control does not  
have an “ON” key, press CH+ or one of the digit keys on the  
Home Producer to turn your Cable Box on.  
GE  
Sansui  
Sanyo  
Sears  
Sony  
Symphonic  
Zenith  
Hitachi  
HQ  
Lloyds  
Magnavox  
For a detailed explanation of what function each  
key will perform in the Cable mode, please refer to  
page 56 in the “Key Index”.  
0000  
0000, 0035 (TV = 0051),  
0081 (TV = 0054)  
0240  
0037, 0162 (TV = 0250)  
0240  
Magnin  
Memorex  
MGA  
Mitsubishi  
Orion  
NOTE: If a separate TV code is listed  
for your brand, use it to set up your  
television by following the instructions  
on page 10.  
0048 (TV = 0093)  
0002, 0294, 0479  
Download from Www.Somanuals.com. All Manuals Search And Download.  
16  
17  
4
Press the MENU – key. The display  
Set Up Codes For Cable Boxes  
screen will change to [CODE  
SETUP]. Press SELECT. The  
display will change to [DEV SET UP].  
ABC  
0003, 0008, 0014, 0017,  
0007, 0011, 0001, 0013  
0153, 0315  
0022, 0207  
0153, 0022, 0207, 0797  
0056  
Philips  
0153, 0025, 0027, 0031  
0144, 0023, 0533  
Pioneer  
Popular  
Mechanics  
Proscan  
Pulsar  
Allegro  
Antronix  
Archer  
Belcor  
0400  
0021  
0000  
0000  
5
6
7
Press SELECT and the display  
screen will change to [CABLE].  
Bell & Howell 0014  
Quasar  
Cable Star  
Cabletenna  
Cableview  
Century  
0056  
0022  
0022  
0153  
0153, 0315  
0025, 0031  
0040  
RCA  
0021  
Radio Shack  
Realistic  
Recoton  
Regal  
Regency  
Rembrandt  
Runco  
0015, 0315, 0797, 0883  
0207  
0400  
0020, 0259  
0002  
0011  
0000  
0040  
0144, 0040  
Press the MENU – key. The display  
screen will change to [SAT].  
Citizen  
Colour Voice  
Comtronics  
Contec  
Enter the first Satellite code listed  
for your brand in the “Set Up Codes  
for Satellites” on page 17, then  
0019  
Digi  
Eastern  
Emerson  
Everquest  
Focus  
0637  
0002  
0797  
0015, 0040  
0400  
SL Marx  
Samsung  
Scientific  
Atlanta  
Seam  
press SELECT. Point the remote  
control at the Satellite and press  
POWER. Your Satellite should turn  
OFF. If your Satellite turns OFF,  
press the ESC key to return the dis-  
play to [SAT and the TIME]. If your  
Satellite does not turn OFF, enter  
the next code in the code list then  
press SELECT followed by POWER  
again. Once the correct code is en-  
tered, press the ESC key to return  
the display to [SAT and the TIME].  
0008, 0477, 0017  
0510  
0015, 0040  
0011  
GC Electronics 0056, 0207  
Signal  
Garrard  
Gemini  
0153  
0015  
Signature  
Sprucer  
Starcom  
Stargate  
Starquest  
Sylvania  
TFC  
0021  
General  
Instrument  
GoldStar  
Goodmind  
Hamlin  
Hitachi  
0003, 0015  
0015, 0040, 0797  
0015  
0001  
0310  
0063  
0258  
0040  
0001  
0418  
0012, 0013  
0000  
0015  
0153, 0022, 0207  
0476, 0276, 0011, 0810  
0144, 0040  
0797  
0020, 0259, 0009, 0034  
0011  
TV86  
Hytex  
0007  
Tandy  
Jasco  
Jerrold  
0015, 0153, 0315  
0003, 0012, 0476, 0276,  
0014, 0015, 0011, 0810  
0440  
Teleview  
Texscan  
Timeless  
Tocom  
Linsay  
Magnavox  
Memorex  
Movie Time  
NAP  
0014, 0027  
0000  
0063, 0156  
0007  
Toshiba  
Tusa  
Unika  
For a detailed explanation of what function each key  
will perform in the Satellite mode, please refer to  
page 59 in the “Key Index”.  
United Artists 0007  
NSC  
Novaplex  
Oak  
Optimus  
Panasonic  
Panther  
Paragon  
0063, 0156  
0618  
0019, 0007  
0021  
0000, 0107, 0021  
0637  
0000  
Universal  
0153, 0022, 0056, 0191,  
0207  
0250  
0063, 0027, 0258  
0008, 0000, 0015, 0207,  
0525  
Videoway  
Viewstar  
Zenith  
Set Up Codes for DSS and Satellite Receivers  
Zentek  
0400  
AlphaStar  
0772  
Janeil  
0152  
Astro Industries 0095  
Jerrold  
Legend  
0627, 0361  
0269  
0018  
0724, 0722  
0724, 0269  
0869  
0701, 0152  
0724, 0722, 0200  
0074  
0627, 0361  
0566  
0566, 0143, 0392, 0855  
0566, 0869  
0052  
0041, 0210  
0639  
0869  
BSR  
Capetronic  
0095  
0095  
Macom  
Magnavox  
Memorex  
Next Level  
Panasonic  
Philips  
President  
Primestar  
Proscan  
RCA  
Channel Master 0018, 0212  
Chaparral  
DX Antenn  
Drake  
0053, 0209, 0216  
0041  
0018, 0064, 0149, 0245  
To Set Up Your DSS or Satellite Receiver:  
NOTE: If the four-digit code for your device begins with a “0”, only  
the last three numbers of your code will be displayed.  
Echostar/  
Dish Network 0775, 0148, 0159, 0269,  
0280  
1
Turn on your DSS or Satellite  
Receiver.  
Expressvu  
General  
0775  
Instrument  
HTS  
Hitachi  
Homecable  
Hughes  
0627, 0361, 0869  
Radio Shack  
Realistic  
STS  
0775  
0819  
0238  
2
3
Press and release the CBL/SAT key.  
Sony  
Star Choice  
Star Trak  
Toshiba  
Uniden  
Press and hold SETUP until the  
display screen changes from  
Network Sys. 0749  
0180  
Hytek  
IQ  
IQ Prism  
JVC  
0095  
0210  
0210  
0775  
0790, 0082  
0724, 0722, 0052, 0074,  
0076, 0238, 0370  
0064, 0245, 0856  
[CABLE and the TIME] to [TIMED SEQ].  
Zenith  
Download from Www.Somanuals.com. All Manuals Search And Download.  
18  
19  
To Set Up Your DVD or LD Player:  
Set Up Codes for DVD Players  
Harman/Kardon 0582  
Pioneer  
Proscan  
RCA  
Samsung  
Sony  
Technics  
Theta Digital  
Toshiba  
Yamaha  
Zenith  
0525, 0571  
0522  
0522  
0573  
0533  
0490  
0571  
0503  
0490, 0545  
0503, 0591  
NOTE: If the four-digit code for your device begins with a “0”, only  
the last three numbers of your code will be displayed.  
JVC  
Kenwood  
Magnavox  
0558  
0534  
0503  
1
Turn on your DVD or LD Player and  
insert a disc.  
Magnavox CD-R 0626  
Mitsubishi  
Onkyo  
0521  
503  
Optimus  
Panasonic  
Philips  
0525  
0490  
0503, 0539  
2
3
Press and release the DVD key.  
Press and hold SETUP until the  
display screen changes from  
Set Up Codes for LD Players  
[DVD and the TIME] to [TIMED SEQ].  
Aiwa  
Carver  
Denon  
Disco Vision  
Funai  
0203  
Panasonic  
Philips  
Pioneer  
Quasar  
Realistic  
Samsung  
Sega  
0204  
0064, 0194, 0323  
0059, 0172  
0023  
0064, 0194  
0059, 0023  
0204  
0203  
0323  
4
5
Press the MENU – key one time.  
The display screen will change to  
[CODE SETUP]. Press SELECT.  
The display will change to  
[DEV SET UP].  
0203  
Harman/Kardon 0194  
Hitachi  
0023  
0023  
Magnavox  
Marantz  
Mitsubishi  
NAD  
0194, 0217  
0064, 0194  
0059  
Sony  
0193, 0201  
0204  
0194  
Technics  
Theta Digital  
Yamaha  
Press SELECT and the display  
0059  
0217  
screen will change to [DVD].  
NOTE: If you are setting up a LD Player, press either MENU + or  
MENU –. The display will change to [LDP].  
To Set Up Your CD or MD Player:  
6
Enter the first DVD or LD code listed  
for your brand in the “Set Up Codes  
for DVD Players” or “Set Up Codes for  
LD Players” on the next page, then  
press SELECT. Aim the remote con-  
trol at the DVD or LD player and  
NOTE: If the four-digit code for your device begins with a “0”, only  
the last three numbers of your code will be displayed.  
1
Turn on your CD or MD Player and  
insert a disc.  
2
3
Press and release the CD key.  
or press POWER or PLAY.Your player  
should turn OFF or start to play your  
disc. Press the ESC key to return the  
display to [DVD and the TIME]. If  
your player does not turn OFF or start  
to play your disc, enter the next code  
in the code list then press SELECT  
followed by POWER or PLAY again.  
Once the correct code is entered,  
press the ESC key to return the dis-  
play to [DVD and the TIME].  
Press and hold SETUP until the  
display screen changes from  
[CD and the TIME] to [TIMED SEQ].  
4
Press the MENU – key one time.  
The display screen will change to  
[CODE SETUP]. Press SELECT.  
The display will change to  
[DEV SET UP].  
5
6
Press SELECT and the display  
screen will change to [CD].  
For a detailed explanation of what function each key  
will perform in the DVD mode, please refer to  
page 58 in the “Key Index”.  
Enter the first CD code listed for your  
brand in the “Set Up Codes for CD or  
MD Players” on the next page, then  
press SELECT.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
20  
21  
To Set Up Your CD or MD Player (cont.):  
Set Up Codes for CD or MD Players (cont.)  
Sylvania  
Tascam  
Teac  
Technics  
Vector  
0157  
0420  
Victor  
Wards  
Yamaha  
Yorx  
0072  
7
Aim the remote control at the CD or  
MD player and press POWER or  
PLAY.Your player should turn OFF  
or start to play your disc. Press the  
ESC key to return the display to [CD  
and the TIME]. If your player does not  
turn OFF or start to play your disc,  
enter the next code in the code list  
then press SELECT followed by  
POWER or PLAY again. Once the  
correct code is entered, press the  
ESC key to return the display to [CD  
and the TIME].  
0157, 0053  
0036, 0170, 0187  
0461  
0420, 0393, 0174, 0180  
0029, 0207, 0303  
or  
Research  
0194, 0417  
To Set Up Your Tuner/Receiver:  
NOTE: If the four-digit code for your device begins with a “0”, only  
the last three numbers of your code will be displayed.  
1
2
3
Turn on your Tuner/Receiver.  
Press and release the TUNER key.  
Press and hold SETUP until the  
display screen changes from [TUNER  
and the TIME] to [TIMED SEQ].  
For a detailed explanation of what function each  
key will perform in the CD mode, please refer to  
page 63 in the “Key Index”.  
4
Press the MENU – key one time.  
The display screen will change to  
[CODE SETUP]. Press SELECT.  
The display will change to  
[DEV SET UP].  
Set Up Codes for CD or MD Players  
ADC  
0018  
Magnavox  
0157, 0305  
Adcom  
Aiwa  
Akai  
Audio Alchemy 0194  
Audio-Technica 0170  
0155, 0234  
0157, 0012, 0124  
0156  
Magnavox CD-R 0626  
Marantz  
McIntosh  
Mission  
NEC  
0029, 0157, 0180  
0287  
0157  
0043, 0234  
5
6
Press SELECT and the display  
screen will change to [TUNER].  
BSR  
0194, 0245  
NSM  
Nakamichi  
Nikko  
Onkyo  
Optimus  
0157  
0147  
0164, 0170, 0174  
0101, 0868  
000, 0032, 0179, 0305,  
0037, 0420, 0145, 0468,  
0087, 0175, 0194, 0196,  
0280, 0342, 0426, 0437  
0029, 0303, 0367, 0752  
0420, 0194  
0157, 0287, 0626  
0032, 0305, 0468, 0244  
0053  
Bang & Olufsen 0212  
Burmester  
California  
Audio Labs  
Carrera  
Carver  
Crown  
Curtis Mathes 0029  
DAK  
DBX  
DKK  
0420  
Enter the first Tuner code listed for  
your brand in the “Set Up Codes for  
Tuner/Receivers” on the next page,  
then press SELECT. Aim the remote  
control at the Tuner/Receiver and  
press POWER.Your Tuner/Receiver  
should turn OFF. Press the ESC key  
to return the display to [TUNER and  
the TIME]. If your Tuner/Receiver  
does not turn OFF, enter the next  
code in the code list then press  
SELECT followed by POWER. Once  
the correct code is entered, press the  
ESC key to return the display to  
[TUNER and the TIME].  
0029  
0194  
0157, 0179, 0437  
0122  
Panasonic  
Parasound  
Philips  
Pioneer  
Proscan  
Proton  
QED  
0245  
0254  
0000  
0003, 0873  
0305, 0155, 0164, 0469  
0179, 0088, 0174, 0342  
0009  
0420, 0393, 0245, 0280,  
0425  
Denon  
Emerson  
Fisher  
GE  
0157  
0157  
0029  
Quasar  
RCA  
Garrard  
0179, 0305, 0053, 0009,  
0155, 0764  
0179, 0420, 0155, 0164,  
0175, 0180  
0157, 0420  
0157  
0018  
0157, 0305, 0202  
0179, 0087  
0305, 0155, 0164  
0305  
0037, 0180, 0861  
0180, 0196, 0426  
0043  
Genexxa  
GoldStar  
0032, 0305, 0164  
0417  
Realistic  
Harman/Kardon 0157, 0173, 0426  
Hitachi  
JVC  
Rotel  
SAE  
STS  
0032, 0155  
0072, 0655, 0658  
0028, 0037, 0190, 0826,  
0681  
0287  
0157  
0018  
0305  
0157  
0093  
0029, 0043  
0420  
Kenwood  
Sansui  
Sanyo  
Scott  
Sears  
Sharp  
Sherwood  
Shure  
Sony  
Kodak  
Krell  
Kyocera  
LXI  
Linn  
Luxman  
MCS  
For a detailed explanation of what function each  
key will perform in the Tuner mode, please refer to  
page 60 in the “Key Index”.  
0000, 0185, 0490, 0604,  
0605  
0145, 0425  
MTC  
Soundesign  
Download from Www.Somanuals.com. All Manuals Search And Download.  
22  
23  
Set Up Codes For Tuner/Receivers  
To Set Up Your Amplifier (cont.):  
ADC  
0531  
0616  
Optimus  
0531, 0670, 0186, 0042,  
0177, 0181, 0219, 0738,  
0801, 1023, 0042,  
0080*, 0181, 0186,  
0531, 0670, 0738, 0801  
0039, 0309, 0518  
0195  
5
Press SELECT and the display  
screen will change to [AMP].  
Adcom  
Aiwa  
Akai  
Bang & Olufsen 0898  
Capetronic  
Carver  
Casio  
Clarinette  
Curtis Mathes 0039, 0080  
Denon  
Emerson  
Fisher  
Garrard  
Harman/Kardon 0110, 0189, 0891  
Inkel  
JBL  
JVC  
Kenwood  
0158, 0189, 0121, 0405  
0076, 0224  
6
Enter the first Amplifier code listed for  
your brand in the “Set Up Codes for  
Amplifiers” on the page 23, then press  
SELECT.  
0531, 0195  
0189, 0008, 0042, 0360  
0195  
0195  
Panasonic  
Penney  
Philips  
0189, 0391  
Pioneer  
0531, 0014, 0150, 0630,  
0080, 1023, 0014*,  
0080*, 0150, 0531,  
0630, 1023  
0054  
0039  
0531, 0054, 0346, 0360,  
0530  
0195, 0163, 0181  
0189, 0193, 0346  
0219, 0801  
0004, 0273, 0771  
0424  
0042, 0219, 0360, 0801  
0463, 0424  
7
Aim the remote control at the  
Proscan  
Quasar  
RCA  
Amplifier and press POWER.Your  
Amplifier should turn OFF. Press the  
ESC key to return the display to [AMP  
and the TIME]. If your Amplifier does  
not turn OFF, enter the next code in  
the code list then press SELECT  
followed by POWER. Once the cor-  
rect code is entered, press the ESC  
key to return the display to [AMP and  
the TIME].  
0062  
0110  
0074  
Realistic  
Sansui  
Sanyo  
Scott  
Sharp  
Sherwood  
Siemens  
Sony  
0027, 0186, 0042, 0077,  
0313, 0314  
0424  
0181  
0189  
0163, 0322  
0186  
Koss  
LXI  
Linn  
Lloyd’s  
MCS  
0491, 0062, 0502  
0424  
0158, 0168, 0474,  
0158**, 0474  
0670  
0463, 0163  
0039, 0309, 0208, 0518  
0074  
0195  
0039, 0346  
0531, 0189, 0195, 0128,  
0391  
0039, 0189, 0128  
0195  
0320  
0235  
0097, 0347  
0135, 0100, 0380  
Magnavox  
Soundesign  
Teac  
Technics  
Victor  
Marantz  
Modulaire  
NAD  
NEC  
Nakamichi  
Onkyo  
For a detailed explanation of what function each key  
will perform in the Amplifier mode, please refer to  
page 61 in the “Key Index”.  
Wards  
0158, 0014, 0189, 0080,  
0042, 0054  
0176, 0186  
Yamaha  
Yorx  
0195  
Zenith  
0857  
Set Up Codes for Amplifiers  
NOTES: *May use Amplifier code 0013 for power and volume.  
See below section for amplifier setup and codes.  
Aiwa  
Bose  
Carver  
Curtis Mathes 0300  
Denon  
GE  
0406  
0674  
0269  
Optimus  
Panasonic  
Parasound  
Philips  
Pioneer  
Realistic  
Sansui  
0395  
0308  
0246  
0269, 0892  
0013, 0300  
0395  
**May use Miscellaneous Audio code 0159 to operate surround  
and tuner presets. See page 24 for misc. audio setup and codes.  
0160  
0078  
Harman/Kardon 0892  
0321  
JVC  
Kenwood  
Linn  
Luxman  
Magnavox  
Marantz  
NEC  
0331  
0356  
0269  
0165  
0269  
0269, 0321, 0892  
0264  
Shure  
Sony  
Soundesign  
Technics  
Victor  
0264  
To Set Up Your Amplifier:  
0220, 0689  
0078, 0211  
0308, 0521  
0331  
0013, 0078, 0211  
0354, 0133, 0143, 0504  
NOTE: If the four-digit code for your device begins with a “0”, only  
the last three numbers of your code will be displayed.  
Wards  
Yamaha  
1
2
3
Turn on your Amplifier.  
Nakamichi  
0321  
Press and release the AMP key.  
Press and hold SETUP until the  
display screen changes from  
[AMP and the TIME] to [TIMED SEQ].  
4
Press the MENU – key one time.  
The display screen will change to  
[CODE SETUP]. Press SELECT.  
The display will change to  
[DEV SET UP].  
Download from Www.Somanuals.com. All Manuals Search And Download.  
24  
25  
6
7
Press MENU – to toggle between  
[TAPE] and [DAT]. Once [TAPE] is  
SETTING UP ADDITIONAL HOME  
ENTERTAINMENT COMPONENTS  
on the display screen, enter the first  
Cassette Deck code listed for your  
brand in the “Set Up Codes for  
Cassette Decks” on the next page,  
then press SELECT.  
Besides the device keys that are already labeled  
(TV, VCR, CBL, etc.), the Home Producer can also  
operate the following components: Cassette Decks,  
Home Automation, Digital Audio Tape, Turntables,  
Video Accessories, and Miscellaneous Audio  
Components (e.g., Graphic Equalizers and Digital  
Music Service Boxes).  
Point the remote control at the  
Cassette Deck and press POWER.  
Your Cassette Deck should turn  
OFF. Then press the ESC key to  
return the display to [TAPE and the  
TIME]. If your Cassette Deck does  
not turn OFF, enter the next code in  
the code list then press SELECT  
followed by POWER again. Once  
the correct code is entered, press  
the ESC key to return the display to  
[TAPE and the TIME].  
The Set Up codes for these devices can be  
accessed under the following device keys:  
Cassette Decks:  
Home Automation:  
Digital Audio Tape:  
Turntables:  
Use the AUX1 Key  
Use the CD Key  
Use the AUX1 Key  
Use the CD Key  
Video Accessories:  
Use the CBL/SAT Key  
(Note: Web TV found under Video Accessories)  
Miscellaneous Audio: Use the AMP Key  
NOTE: Each device key (e.g., TV, VCR, CBL/SAT, etc.) can  
only operate one component at a time. If you have already set  
up a component on a key, then assigning a second component  
on the same key will erase the code for the first component you  
set up. For example, if you set up a DVD Player on DVD and  
then set up a Turntable on DVD, the Home Producer will only  
operate the Turntable.  
Re-assigning Device Keys  
You can use the Home Producer to operate a sec-  
ond TV or a second VCR or any combination of  
eight devices. To do this, you must re-assign one of  
the device keys (i.e., TV, VCR, DVD, CBL/SAT,  
TUNER, AMP, CD, or AUX1) to operate your sec-  
ond device. For example, to re-assign one of the  
device keys to support your other components:  
For example, to set up a Cassette Deck on the  
AUX1 key:  
NOTE: If the four-digit code for your device begins with a “0”,  
only the last three numbers of your code will be displayed.  
1
Press and hold SETUP until the  
display screen changes from  
[DVD/LDP and the TIME] to  
[TIMED SEQ].  
1
2
3
Turn on your Cassette Deck.  
Press and release the AUX1 key.  
Press and hold SETUP until the  
display screen changes from  
2
x2 Press the MENU – key twice.  
The display screen will change to  
[CONFIGURE]. Press SELECT.  
The display will change to  
[THEATR SEL].  
[TAPE and the TIME] to [TIME SEQ].  
4
5
Press the MENU – key one time.  
The display screen will change to  
[CODE SETUP]. Press SELECT.  
The display will change to  
[DEV SET UP].  
3
x3 Press the MENU – key three times.  
The display screen will change to  
[MODE MAP]. Press SELECT.  
The display will change to  
[SOURCE].  
Press SELECT and the display  
screen will change to [TAPE].  
Download from Www.Somanuals.com. All Manuals Search And Download.  
26  
27  
Re-assigning Device Keys (cont.)  
SEARCHING FOR YOUR CODE  
If your components do not respond to the Home  
4 (Device Key) Press the device key you would like  
to move. The display screen will  
Producer after trying all of the codes listed for your  
brand, or if your brand is not listed at all, try search-  
ing for your code. For example, after trying all of the  
codes for your brand of TV, you still cannot get the  
Home Producer to operate your TV, then:  
change to [COPY TO]. Press the  
unused device key you would like to  
replace. The display will change to  
[DEVICE2 and the TIME]. Proceed  
with programming the re-assigned  
device key with the appropriate code.  
1
2
Press and release the TV key.  
Press and hold SETUP until the  
display screen changes from  
Set Up Codes for Cassette Decks  
Aiwa  
Akai  
0029, 0197, 0200  
0283  
Optimus  
Panasonic  
Philips  
Pioneer  
Revox  
Sansui  
Sherwood  
Sony  
Teac  
Technics  
Victor  
Wards  
Yamaha  
0027, 0220, 0337, 0439  
0229  
0029  
0027, 0220, 0099  
0190  
0029, 0009  
0337  
0243, 0170, 0291  
0308  
0229  
0273  
[TV and the TIME] to [TIMED SEQ].  
Bang & Olufsen 0219  
Carver  
Denon  
Fisher  
0029  
0076  
0074  
0308, 0439  
3
4
Press the MENU – key one time.  
The display screen will change to  
[CODE SETUP]. Press SELECT.  
The display will change to  
[DEV SET UP].  
Garrard  
Harman/Kardon 0182, 0029  
JVC  
Kenwood  
Magnavox  
Marantz  
Mitsubishi  
Onkyo  
0244, 0273  
0070, 0071  
0029  
0029, 0009  
0283  
0027  
0097, 0094  
Press the MENU – key another time.  
The display screen will change to  
[DEV SEARCH]. Press SELECT.  
The display will change to  
[TV and XXX].  
0135, 0136, 0282  
Set Up Codes for Home Automation  
GE  
LiteTouch  
Lutron  
0240  
0084  
0318  
0167  
Radio Shack  
Security System 0167  
Universal X10 0167  
0240  
One For All  
X10  
0167  
NOTE: XXX represents the last three-digit code that was entered  
prior to starting the search.  
Set Up Codes for Digital Audio Tape  
5
Press POWER. If your TV turns  
OFF, press SELECT to lock in your  
code and return the display to  
[TV and the TIME]. If your TV does  
not turn OFF, press MENU –. The  
next available code will appear on  
the display screen, then press  
POWER again. Continue to press  
POWER then MENU – until your TV  
turns OFF. Once your TV turns OFF,  
press SELECT to lock in your code  
and return the display to  
Carver  
Denon  
Harman/Kardon 0158  
Magnavox 0158  
0158  
0031  
Marantz  
Philips  
Sony  
0158  
0158  
0093  
or  
Set Up Codes for Turntables  
Aiwa  
Carver  
Magnavox  
0188  
0188  
0188  
Marantz  
Philips  
Sony  
0188  
0188  
0348  
Set Up Codes for Video Accessories  
Archer  
GC Electronics 0160  
Jebsee  
Magnavox  
Web-TV  
0160  
Philips Web-TV 0818  
RadioShack 0160  
Sony Web-TV 0850  
TeleCaption 0171  
0160  
0818  
[TV and the TIME].  
NOTE: If you are searching for your VCR, CD Player, DVD Player,  
or LD Player code, use PLAY instead of POWER. Once your  
component begins to play the tape or disc, press SELECT to lock  
in the code.  
Set Up Codes for Miscellaneous Audio  
Aiwa  
0010, 0159, 0404  
0052  
RCA  
0056  
0317  
0376  
Fisher  
SSI  
Harman/Kardon 0477  
Schneider  
JBL  
0477  
Scientific Atlanta 0460  
JVC  
0073  
Sony  
0010, 0159  
Jerrold  
Nikko  
Paramount Pict. 0317  
0459, 0520  
0376  
Soundesign  
Starcom  
Yorx  
0376  
0459  
0376  
Download from Www.Somanuals.com. All Manuals Search And Download.  
28  
29  
Finding Out Your Code  
SETTING UP THE HOME THEATER KEY  
The HOME THEATER mode key brings all of the  
most commonly used home theater functions into  
one mode of the Home Producer. When setting up  
this key, you will choose which components will  
control your volume, channel changing, playback,  
Picture-in-Picture and menu functions.  
After you have set up your components using the  
search, you may need to find out which four-digit  
code is operating your components. For example, to  
find out what four-digit code is operating your TV:  
1
2
Press and release the TV key.  
1
2
Press and release the HOME  
THEATER mode key.  
Press and hold SETUP until the  
display screen changes from  
[TV and the TIME] to [TIMED SEQ].  
Press and hold SETUP until the  
display screen changes from  
[THEATER and the TIME] to  
[TIMED SEQ].  
3
4
Press the MENU – key one time.  
The display screen will change to  
[CODE SETUP]. Press SELECT.  
The display will change to  
[DEV SET UP].  
3
4
x2 Press the MENU – key twice, the  
display will change to [CONFIGURE].  
Press SELECT, the display will  
change to [THEATR SEL], press  
SELECT. The display will change  
to [AUDIO].  
x2 Press MENU – twice. The display  
will change to [DEV NUMBER].  
Press SELECT. The display will then  
change to [TV and your code]. Write  
down the code in the below boxes  
and press ESC to return the display  
to [TV and the TIME].  
x2  
Press SELECT. This will change the  
display to [AMP] or, if you have  
redefined the AMP key, the display  
would read [TV2], [DVD2], [SAT2]  
and so on. At this screen you will  
select the device that will control  
your Volume in the Home Theater  
TV code:  
VCR Code:  
Cable Code:  
(Device Key) Mode. Use the device keys AMP,  
TUNER, TV, CBL/SAT or DVD to  
choose your AUDIO selection.  
Once you choose the AUDIO  
source, press SELECT. For  
Satellite Code:  
example, if your Tuner will control  
your volume in the Home Theater  
Mode, press TUNER + SELECT.  
The display will change to [CHAN-  
NEL]. This will allow you to choose  
the device that will control your  
channel changing.  
Tuner Code:  
Amplifier Code:  
CD Player Code:  
DVD/LD Player Code:  
(continued on next page)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
30  
31  
After setting up the HOME THEATER Mode key, you  
can then set up a macro sequence on the POWER  
key in the Home Theater Mode. This macro will  
allow you to power ON all of your components in the  
Home Theater mode with the press of one key.  
SETTING UP THE HOME THEATER KEY (c ont.)  
5
Press SELECT. This will change the  
display to [TV]. Use the device keys  
(Device Key) TV, VCR, CBL/SAT or DVD to  
choose your CHANNEL source, then  
press SELECT. For example, if your  
Satellite will control channel chang-  
ing in the Home Theater Mode,  
Power Key Macro - Powering ON Your Home  
Theater Components with One Key Press  
1
Press and release the HOME  
THEATER Mode key, then press  
and hold SETUP until the display  
screen changes from [THEATER  
and the TIME] to [TIMED SEQ].  
x2 Press the MENU – key twice,  
the display will change to  
press CBL/SAT + SELECT. The dis-  
play will change to [PLAYBACK].  
This will allow you to choose the  
device that will control the transport  
keys (PLAY, REW, FF, PAUSE, STOP  
and REC).  
[CONFIGURE]. Press SELECT,  
the display will change to  
[THEATR SEL].  
6
Press SELECT. This will change the  
display to [VCR]. Use the device keys  
(Device Key) CD, VCR, or DVD to choose your  
PLAYBACK source, then press  
2
3
x4 Press MENU – four times until the  
display reads [KEY MACRO].  
Press SELECT. The display will  
read [SEL MACKEY].  
SELECT. For example, if your DVD  
Player will control playback in the  
Home Theater Mode, press DVD +  
SELECT. The display will change to  
[PIP]. This will allow you to select the  
device that will control your Picture-  
in-Picture features.  
Press the POWER key to assign the  
macro to POWER. Enter the macro  
sequence that will power “ON” your  
home theater, for example:  
7
Press SELECT. This will change the  
display to [TV]. Use the device keys  
(Device Key) TV, CBL/SAT, or VCR to choose  
your PICTURE-IN-PICTURE source,  
then press SELECT. For example, if  
your VCR will control Picture-in-  
(Sequence) TUNER + POWER + TV + POWER  
+ VCR + POWER + etc., until you  
have added all of your home theater  
components.  
Picture features in the Home Theater  
Mode, press VCR + SELECT. The  
display will change to [MENU]. This  
will allow you to select the device  
4
5
When your macro sequence is con-  
cluded, press ESC to save. The dis-  
play will then return to the [THE-  
ATER and the TIME] screen.  
that will control your Menu features.  
8
Press SELECT. This will change the  
display to [CABLE]. Use the device  
To activate the Home Theater  
Power macro, the LCD screen must  
read [THEATER], and you must  
press POWER.  
(Device Key) keysTV, CBL/SAT, VCR, TUNER,  
or DVD to choose your MENU  
source, then press SELECT. For  
example, if your DSS will control your  
Menu features in the Home Theater  
Mode, press CBL/SAT + SELECT.  
The display will then return to the  
[DEVICE and the TIME] screen.  
NOTE: The MACRO or MACRO2 keys cannot be used in your  
Home Theater Power key macro.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
32  
33  
7
8
Press and release the (1~6)L key  
LEARNING FUNCTIONS ONTO THE 1L  
THROUGH 6L KEYS  
where you want to assign a compo-  
nent’s feature. The Home Producer’s  
red light will flash rapidly.  
The 1L, 2L, 3L, 4L, 5L, and 6L keys can be used to  
customize those functions that are unique to your  
home entertainment needs. For example, the  
Home Producer does not offer Tracking Up or Down  
for a VCR. However, with the learning feature, you  
can add these as well as many other functions to  
the Home Producer.  
Place your original remote control  
about 2 inches apart (nose-to-nose)  
from the Home Producer.  
NOTE: Please have your original remote controls handy before  
performing learning.  
2"  
1 (Device Key) Press and release the Device key  
(e.g., VCR) where you want Home  
Producer to learn new feature(s).  
NOTE: If the Home Producer has trouble learning a feature, try  
moving your original remote control to the left or right during the  
learning process.The position of the IR LED transmitter on your  
original remote control may be offset.  
2
3
Press and hold SETUP until the  
display screen changes from the  
device you selected [e.g., VCR and  
the TIME] to [TIMED SEQ].  
9
On your original remote control,  
press and hold the key (feature) you  
want learned until the red light on  
the Home Producer blinks twice and  
the display will read [SUCCESS}. If  
the red light on the Home Producer  
does not blink twice or the display  
reads [ERROR], stop and repeat  
step 7 to 9.  
x2 Press MENU – twice, the display  
will change to [CONFIGURE].  
Press SELECT, the display will  
change to [THEATR SEL]. Press  
MENU + twice, the display will  
x2 change to [IR LEARNER].  
NOTE: You can now repeat steps 6 through 9 to learn additional  
functions on the other (1~6)L keys and in different modes.  
4
5
x2  
Press SELECT, the display screen  
will change to [IR LEARN]. Press  
SELECT again.  
10  
11  
Once the Home Producer has  
learned all desired features, press  
and release ESC to exit out of  
learning mode.  
The display screen will change from  
[IR LEARN] to [VCR].  
To test a new feature, press and  
release a desired device key, fol-  
lowed by the (1~6)L key where a  
corresponding feature was learned.  
Home Producer is now ready to learn new features.  
NOTE: At this point, you can press a different device key (e.g.,TV)  
to learn features in a different mode.  
6 (Device Key) Press and release the Device key  
(e.g., TV) in which you would like to  
learn your new function.  
NOTE: Steps 7 through 9 need to be completed within  
10 seconds. Please read the next three steps before proceeding.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
34  
35  
Deleting Functions from the L keys:  
SETTING UP TIMED SEQUENCES -  
RECORDING WHEN YOU ARE NOT HOME  
1 (Device Key) Press and release the Device key  
(e.g., VCR) where you want Home  
The Home Producer is equipped with a special fea-  
ture that lets you set up a sequence of key-strokes  
that can be played back at a specified time, up to  
seven days in advance.You can use this feature to  
record from your DSS satellite, turn on your infrared  
home automation lighting system when you are not  
home, or any other series of keystrokes that you  
would like to play back at a later time. The Home  
Producer can store up ten sequences in the memory  
with each sequence having a maximum of 15 key-  
strokes. For example, to set up the remote to record a  
program off of your DSS receiver:  
Producer to learn new feature(s).  
2
3
Press and hold SETUP until the  
display screen changes from the  
device you selected [e.g., VCR and  
the TIME] to [TIMED SEQ].  
x2 Press MENU – twice, the display  
will change to [CONFIGURE].  
Press SELECT, the display will  
change to [THEATR SEL]. Press  
MENU + twice, the display will  
x2 change to [IR LEARNER].  
1
Press and hold SETUP until the  
display screen changes from  
[DEVICE and the TIME] to [TIMED  
SEQ].  
x2  
Press SELECT. The display will  
change to [ADD MACRO]. Press  
SELECT again.  
4
5
Press SELECT, the display screen  
will change to [IR LEARN]. Press  
MENU + once and the screen will  
change to [IR DELETE]. Press and  
release SELECT.  
2 0 or 1  
The display will change to [START  
and the TIME], with the first digit of  
the TIME blinking. Enter either a 0  
or a 1, then the next digit in the time  
will begin to blink, continue entering  
the time until all four digits of the  
time have been set. Next, [AM/PM]  
will blink. Press MENU – to toggle  
between AM and PM. Choose one  
and press SELECT.  
The display screen will now change  
to [KEY/MODE]. Press and release  
SELECT.  
6 (Device Key) Press and release the Device key  
which holds the learned feature you  
want to delete (e.g., TV). Then  
3
4
The display will change to [ONCE].  
Use MENU – to toggle through  
[ONCE], [DAILY], or [WEEKLY],  
depending on when and how often  
you want the sequence to play.  
Choose one and press SELECT.  
press and release the (1~6)L key  
you want to delete. The Display will  
read [DELETED].  
7
8
You can now repeat steps 5 and 6  
to continue deleting any and all  
learned features.  
The display will change to the day  
of the week on which the sequence  
will begin. Use MENU – to toggle  
through the days of the week until a  
desired day is displayed. Press  
SELECT. The display will change to  
[ENTER SEQ].  
Press the ESC key to return to the  
main display [DEVICE and the  
TIME].  
Download from Www.Somanuals.com. All Manuals Search And Download.  
36  
37  
To Delete a Timed Sequence  
1 Press and hold SETUP until the  
NOTE: When setting up your sequence, you will need to include  
any keystrokes that would normally be required during regular  
usage, such as pressing ENTER after entering a channel number  
when changing channels.  
display screen changes from  
[DEVICE and the TIME] to [TIMED  
SEQ]. Press SELECT. The display  
will change to [ADD MACRO].  
Press MENU – one time. The dis-  
play will change to [DEL MACRO].  
Press SELECT.  
For example, enter a sequence that  
will start your VCR recording your  
DSS channel as follows:  
SAT + POWER + SAT + 2 + 7 + 5 +  
VCR + POWER + VCR + RECORD.  
This sequence will turn on the DSS,  
change the channel to 275, and turn  
on the VCR and start it recording.  
2
The display will then change to  
[DEL (the DAY or D for Daily or W  
for WEEKLY) and (the TIME of the  
Sequence)]. If this is the timed se-  
quence you would like to delete,  
press SELECT. The display will  
change to [DELETED] then return  
to [DEVICE and the TIME].  
5
Once a sequence has been set up,  
press the ESC key to return to the  
[DEVICE and the TIME] display  
screen. Below the [TIME], a CLOCK  
(
) symbol will appear to show  
NOTE: If you have more than one timed sequence saved in the  
memory of the Home Producer, use the MENU – key to scroll  
through your saved timed sequences until you see the sequence  
you would like to delete. Once the sequence is displayed on the  
screen, press SELECT. The display will change to [DELETED]  
then return to the next available sequence to be deleted. If there  
are no other sequences to be deleted, then the display will return  
to [DEVICE and the TIME].  
that there is a timed sequence in  
the memory.  
NOTE: If, at any time during the set up of your timed sequence, a  
mistake is made, press the ESC key to return to the main display  
[DEVICE and the TIME]. Then delete the sequence that was  
incorrect and restart your timed sequence.  
After you have set up a timed sequence, you may  
want to set up a second sequence that turns every-  
thing off after your initial sequence. For the example  
above, after recording the program from your DSS,  
you can set up a second sequence to power OFF  
your DSS and VCR. Just repeat steps 1 through 5 to  
set up a sequence to power OFF your components.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
38  
39  
REPEATING A SERIES OF KEY PRESSES USING  
HOW TO USE THE SHIFT KEY  
THE MACRO AND MACRO2 KEYS  
The Home Producer has additional features that can  
be accessed by using the SHIFT key. They are list-  
ed above the keys that they are mapped to.  
The Home Producer has two Macro keys (MACRO  
and MACRO2) that will play back a series of key  
strokes at any time with the press of one key. Each  
sequence can have up to a maximum of 15 key-  
strokes. These keys are not mode specific and can be  
accessed in any mode. For example, to set up a  
sequence that will turn on devices and turn them to  
the proper inputs:  
For example, on the transport keys PLAY, REW,  
FF, STOP, and PAUSE, there are the following fea-  
tures: SLOW, SLOW+, SLOW–, X2, and EJECT.  
If you want to eject a tape from your VCR, press:  
1
Press and hold SETUP until the dis-  
play screen changes from [DEVICE  
x2 and the TIME] to [TIMED SEQ].  
Press MENU – twice until the display  
reads [CONFIGURE], then press  
SELECT. The display will then read  
[THEATR SEL].  
SHIFT + STOP  
This will eject your tape, as long as your original  
remote supported this feature.  
NOTE: Once you have pressed the SHIFT key, Home Producer  
will remain in the "Shift" mode, as indicated by an [S] on the LCD  
screen, for 5 seconds after the last key press or until the SHIFT  
key is pressed again.  
2
x4 Press MENU – four times until the  
display reads [KEY MACRO]. Press  
SELECT. The display will read  
The following keys have functions that are shifted:  
[SEL MACKEY]. Press either the  
MACRO or MACRO2 key. This will  
be the key that will play back the  
series of keystrokes assigned to  
that key. The display will then read  
[ENTER SEQ]. Begin entering the  
sequence of keystrokes, up to 15.  
CENTER:  
MENU:  
SELECT:  
MUTE:  
PREV CH:  
PIP:  
REW:  
PLAY:  
FF:  
SHIFT + CENTER = REAR  
SHIFT + MENU = PROGRAM  
SHIFT + SELECT = CLEAR  
SHIFT + MUTE = SLEEP  
SHIFT + PREV CH = DISPLAY  
SHIFT + PIP = FREEZE PIP  
SHIFT + REW = SLOW-  
SHIFT + PLAY = SLOW  
SHIFT + FF = SLOW +  
or  
NOTE: When setting up your sequence, you will need to include  
any keystrokes that would normally be required during regular  
usage, such as pressing ENTER after entering a channel number  
when changing channels.  
STOP:  
PAUSE:  
SHIFT + STOP = EJECT  
SHIFT + PAUSE = X2  
For example:  
(sequence) TUNER + POWER + TV + POWER  
+ TV/SAT (to change the input on  
the TV to VIDEO 1) + SAT +  
POWER.  
IMPORTANT: For a more detailed explanation of what function  
each shifted key performs by device type (e.g., TV, VCR, etc.),  
please refer to pages 52 through 64.  
3
When your macro sequence is con-  
cluded, press ESC to save.  
When the sequence key is pressed, the Tuner will  
power ON, the TV will power ON and change its input  
to VIDEO 1, and then the Satellite will power ON.  
Repeat these steps 1 to 3 to setup another  
sequence key (MACRO or MACRO2) for your needs.  
NOTE: If you make a mistake during the setup of a macro  
sequence, press ESC to return to the main display screen and  
begin the setup of your sequence again.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
40  
41  
HOW TO USE THE SLEEP KEY  
VOLUME LOCK  
The Home Producer has a SLEEP key that either  
operates your component’s sleep timer or, if your  
component does not have a sleep timer, it activates  
the Home Producer’s built-in sleep timer, after you  
activate SLEEP LOCK (see below). To use the  
Home Producer’s SLEEP key, press SLEEP (i.e.,  
SHIFT + MUTE).  
With the Home Producer, you can choose which  
home entertainment component controls your vol-  
ume. When you originally set up the Home  
Producer, each individual component operates its  
own volume, provided the component has volume  
control. You can change this setting so that one  
component controls the volume, whether Home  
Producer is in the TV, VCR, or CBL/SAT mode. For  
example, to set-up the Home Producer to always  
If your component does not have a sleep timer, the  
Home Producer will access its own built-in timer. To  
activate it, press SLEEP (i.e., SHIFT + MUTE). The  
display will change to [SLEEP 15]. To add time to the  
sleep timer, press MENU –. Each press of MENU –  
will add 15 minutes to the sleep timer, up to a total of  
60 minutes. Once the desired time is displayed on  
the LCD screen, press SELECT. The display screen  
will change to [SLEEP and the TIME].  
control the volume through your Amplifier in the TV,  
VCR, or CBL/SAT mode:  
1
Press and hold SETUP until the dis-  
play screen changes from [DEVICE  
and the TIME] to [TIMED SEQ].  
2
x2 Press the MENU – key twice, the  
display will change to [CONFIG-  
URE]. Press SELECT, the display  
will change to [THEATR SEL].  
Sleep Lock  
If you would like Home Producer to use its built-in  
sleep timer on all of your components, you can lock  
the SLEEP mode, as follows:  
3
4
x2 Press MENU – two more times, the  
display will read [VOL LOCK].  
Press SELECT, the display will  
change to [UNLOCK].  
1
Press and hold SETUP until the dis-  
play screen changes from [DEVICE  
and the TIME] to [TIMED SEQ].  
2
x2 Press the MENU – key twice, the  
display will change to [CONFIG-  
URE]. Press SELECT, the display  
will change to [THEATR SEL].  
Press MENU + thrice, the display  
x3 will read [SLEEP LOCK]. Press  
SELECT, the display will change to  
[DISABLE].  
Press MENU – one time to change  
the display to [LOCK] then press  
SELECT. Now press the key for the  
component that will control your vol-  
ume. For example, to control the vol-  
ume through your amplifier, press  
AMP. Press SELECT. The display  
will return to [DEVICE and the TIME].  
Now, when you use the volume keys on your  
Home Producer, the volume will be controlled by the  
specified component.  
3
Press MENU – once to change the  
display to [ENABLE], then press  
SELECT. The display will return to  
[DEVICE and the TIME]. Now,  
whenever you press SLEEP (i.e.,  
SHIFT + MUTE), Home Producer  
will use its own built-in sleep timer.  
To return volume control to a component:  
1
Press and hold SETUP until the dis-  
play screen changes from [DEVICE  
and the TIME] to [TIMED SEQ].  
NOTE: When using the built-in sleep timer, pressing POWER will  
cancel the sleep function.  
(continued on next page)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
42  
43  
To return volume control to a component (cont.):  
KEYMOVER  
Keymover allows you to map features from one  
device mode to another. For example, if your VCR  
2
3
4
x2 Press the MENU – key twice, the  
display will change to [CONFIG-  
URE]. Press SELECT, the display  
will change to [THEATR SEL].  
does not have volume control, you can map the vol-  
ume keys in the TV mode to the VCR mode. This  
will allow you to control the volume of your TV while  
in the VCR mode. To move key features from one  
mode to another:  
x2 Press MENU – two more times, the  
display will read [VOL LOCK].  
Press SELECT, the display will  
change to [LOCK].  
1
Press and hold SETUP until the dis-  
play screen changes from [DEVICE  
and the TIME] to [TIMED SEQ].  
2
x2 Press the MENU – key twice, the  
display will change to [CONFIG-  
URE]. Press SELECT, the display  
will change to [THEATR SEL].  
Press MENU – one time to change  
the display to [UNLOCK] then press  
SELECT. The display will return to  
[DEVICE and the TIME].  
3
x4 Press MENU + four times, the dis-  
play will read [KEY MOVER].  
Press SELECT, the display will  
change to [FROM].  
Now, when you use the volume keys on your  
Home Producer, each component will control its  
own volume, as long as that component originally  
had volume control.  
4 (Device Key) Press the device key (e.g., TV,  
VCR, CBL/SAT, etc.) that contains  
the feature you want to move. For  
the example above, to move the  
TV’s volume, you would press TV.  
The display will show [TV].  
5
Press the key for the feature you  
want to move. For the example,  
above, press VOL +. The display will  
change to [TO]. Press the device key  
(Device Key) (i.e., TV, VCR, CBL/SAT, etc.) where  
you would like to place the feature.  
For the example above, press VCR.  
The display will show [VCR].  
6
Now press the key that will control  
the feature you are moving. For the  
example above, press VOL +. The  
display will return to [DEVICE and  
the TIME]. In the VCR mode, your  
Home Producer will now operate  
volume up on your TV. Now, to com-  
plete the example above, repeat this  
sequence to move VOL - and MUTE  
from the TV mode to the VCR mode.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
44  
45  
CLEAR ALL  
SETTING UP AND USING THE IR/ RF  
COMMAND CENTER  
If you would like to reset the Home Producer of all  
advanced functions, use the CLEAR ALL feature.  
The CLEAR ALL feature will erase the following  
functions from the memory of the Home Producer:  
Macro Sequences, Timed Macro Sequences,  
Volume Lock and Keymovers. CLEAR ALL will not  
erase your set-up codes. To clear the memory using  
the CLEAR ALL feature:  
The Home Producer comes with an IR/RF  
Command Center which receives Radio Frequency  
(RF) signals from your Home Producer, anywhere in  
your home, up to 100 feet away. The Command  
Center then converts the RF signal into an Infrared  
signal to control your home theater components. To  
setup the Command Center:  
1
Press and hold SETUP until the dis-  
play screen changes from [DEVICE  
and the TIME] to [TIMED SEQ].  
1
Find a location approximately 8 feet in front  
of your home theater components.  
NOTE: The location should have access to both your equipment  
(line-of-sight) and an outlet to plug in the Command Center.  
2
x2 Press the MENU – key twice, the  
display will change to [CONFIG-  
URE]. Press SELECT, the display  
will change to [THEATR SEL].  
2
Plug in the Command Center’s Power Cord  
and raise the telescoping antenna.  
3
4
Press MENU + one time, the dis-  
play will read [CLEAR ALL]. Press  
SELECT, the display will change to  
[CLR ALL].  
Telescoping Antenna  
x2  
Press SELECT, the display will  
change to [CONFIRM]. Press  
SELECT once more and the  
display will return to [DEVICE and  
the TIME]. Your Home Producer is  
now reset.  
IR Lens  
3
Position the Command Center so the black  
IR lens is aimed at your home theater com-  
ponents.  
4
Test the Command Center by pressing the  
POWER key on the Home Producer. Your  
components should operate from any room  
in your home, up to 100 feet away.  
NOTE: The Home Producer transmits both an IR and an RF sig-  
nal simultaneously. When you are testing the Command Center  
with Home Producer, make sure that the remote control is not  
aimed at your equipment.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
46  
47  
Here is a list of adjustments that can maximize the  
operation of your Command Center. For optimal  
operation of the Home Producer’s Command Center:  
SETTING UP AND USING THE IR/ RF  
COMMAND CENTER (c ont.)  
The Command Center also includes an additional IR  
signal extension cord for use with a component that  
is not in direct line-of-sight of the Command Center.  
If you have a component that is not in the line-of-  
sight of the Command Center:  
1
2
Aim the Home Producer toward the room  
where the Command Center is located.  
Do not position the Command Center near  
metal (such as heat ducts). Metal can  
absorb RF signals.  
3
4
Make sure the batteries in the Home  
Producer are fully charged. Weak batteries  
will affect the range of the Home Producer.  
1
Plug the 4-foot IR signal extension cord into  
the back of the Command Center.  
Make sure that the range of the Home  
Producer is not being affected by other  
radio frequency transmissions.  
NOTE: The tests for range limits of the Home Producer and the  
Command Center were conducted in open-air distance tests.  
Actual distance of the signal will be based on the construction of  
the building the unit is being used in as well as other factors such  
as outside interference.  
2
3
Run the IR signal extension cord to the  
component that is not in the line of sight of  
the Command Center.  
Using the supplied double-sided tape,  
attach the IR signal extension cord so that  
the LED is over or next to the IR sensor of  
your home theater component.  
LED  
4
Test the Home Producer. The Command  
Center will convert the RF signal from the  
Home Producer into an IR signal and trans-  
mit that signal to your component through  
the IR signal extension cord.  
NOTE: If the IR signal extension cord does not control the com-  
ponent that is not in the line of sight of the Command Center,  
reposition the LED until the component is able to be controlled,  
then re-attach the LED .  
Download from Www.Somanuals.com. All Manuals Search And Download.  
48  
49  
COMPLIANCE WITH THE FCC RULES AND  
REGULATIONS  
TROUBLESHOOTING  
Prob le m :  
Solution  
This equipment has been tested and found to comply with the  
limits for a class B digital device, pursuant to part 15 of the FCC  
Rules. These limits are designed to provide reasonable protection  
against harmful interference in a residential installation. This  
equipment generates, uses and radiates radio frequency energy  
and if not installed and used in accordance with the instructions,  
may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in  
a particular installation. If this equipment does cause harmful  
interference to radio or television reception, which can be deter-  
mined by turning the equipment off and on, the user is encour-  
aged to try and correct the interference by one or more of the fol-  
lowing measures:  
LCD screen begins to Replace the batteries with  
fade, does not appear four (4) new AAA alkaline  
or the red light blinks  
five times when you  
press a key?  
batteries.  
The Home Producer Try all of the codes listed for  
does not operate your brand of home entertain-  
your home entertain- ment component in the “Set-  
•
•
Reorient or relocate the receiver antenna.  
Increase the separation between the equipment  
and the receiver.  
ment component?  
Up Codes” section. If this  
•
•
Connect the equipment into an outlet that is different from that  
to which the receiver is connected.  
Consult the dealer or an experienced radio/television techni-  
cian for help.  
does not work, try searching  
for your code. Make sure the  
home entertainment com-  
ponent you are setting up  
is able to be operated with  
an infrared remote control.  
The user is cautioned that changes and modifications made to  
the equipment without the approval of the manufacturer could  
void the user’s authority to operate his equipment.  
FCC authorization Label  
This device complies with part 15 of the FCC Rules. Operation is  
subject to the following two conditions:  
The Home Producer  
is not performing  
commands properly?  
Try all of the codes listed for  
your brand of home enter-  
tainment component in the  
“Set-Up Codes” section.  
Many set-up codes may allow  
some degree of operation.  
However, only one set-up  
code will work correctly with  
your home entertainment  
component.  
1. This device may not cause harmful interference and  
2. This device must accept any interference received, including  
interference that may cause undesired operation.  
FCC ID #:  
Home Producer: DI2 9800  
Command Center:  
You make a mistake  
when setting up your except for Macros and Timed  
During any set up procedure,  
SPECIFICATIONS  
Remote Power.......................................................4 AAA Batteries  
RF Command Console Power ...................................120 Volts AC  
Remote to RF Command Console Range........100 Feet (30.48m)  
RF Command Console to Device Range .....25 Feet (7.62m) ±30˚  
Remote Dimensions (HWD)...................9 3/8 x 2 7/8 x 1 3/8 4 in.  
RF Command Console  
Home Producer?  
Sequences, pressing ESC will  
return you to [DEVICE and the  
TIME] screen without saving. If  
you make a mistake program-  
ming a Timed Sequence,  
return to the Timed Sequence  
menu and delete it. If you  
make a mistake when saving  
a macro, erase it by re-saving  
a new macro on the same key.  
Dimensions (HWD).....................................1 9/16 x 5 1//16 x 4 in.  
Remote Weight (without Batteries)..............................8 oz. (220g)  
RF Command Console Weight................................10.4 oz (300g)  
Specifications are typical. Individual units might vary. Specifications  
are subject to change and improvement without notice.  
VCR not recording?  
As a safety feature on the  
Home Producer, you must  
press the REC key twice.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
50  
51  
TROUBLESHOOTING (c ont.)  
ERROR MESSAGES  
Error  
Me a ning  
Prob le m :  
Solution  
CH +/- and PREV  
CH not working for  
your RCA TV?  
Due to RCA design (1983-  
1987), only the original  
remote control will operate  
these functions.  
MEM FULL  
BATTERY LO  
TOO LONG  
LIST END  
Maximum memory capacity  
has been reached.  
Replace batteries with four  
new "AAA" Alkaline batteries.  
Problems changing  
channels?  
If your original remote control  
required an ENTER keystroke  
when changing channels,  
press the ENTER key on the  
Home Producer after you  
enter the channel number.  
Macro sequence being entered  
exceeds 15 keystrokes.  
You have reached the end of  
all valid codes using the  
Step-N-Set sequence.  
The red light blinks  
when you press a  
key but you receive  
no response from  
Make sure you are aiming  
your Home Producer at your  
home entertainment compo-  
nent and that you are within  
INVALID  
Displayed when trying to  
specify a key that is not valid  
for the sequence being  
your home entertain- 15 feet before using your  
entered. For example, when  
selecting a Device Key (e.g.,  
TV) for a Macro sequence.  
ment component?  
remote control.  
Your audio compo-  
Some audio components may  
nents turn on and off need both a Tuner/Receiver  
NOT FOUND  
ERROR  
Displayed when you enter in  
a code that is not valid for the  
device being programmed.  
and control volume  
but do not change  
preset channels?  
code and an Audio Amplifier  
code to control all of the fea-  
tures of your audio component.  
Displayed when an error has  
occurred in the learning  
sequence.  
Your DSS satellite  
receiver does not  
respond to the  
codes listed in the  
manual?  
The codes listed in this man-  
ual are set up to operate your  
DSS receiver on the 1st or  
2nd addresses only. Make  
sure the DSS Receiver can  
be operated with an infrared  
remote control and is not set  
up to only receive Radio  
Frequency.  
Consumer Help Line: 1-330-593-3325  
World Wide Web: http://www.hudsonag.com  
E-mail help: [email protected]  
The Home Producer Some Bang & Olufsen prod-  
is not operating your ucts, as well as some other  
Bang & Olufsen  
equipment?  
manufacturer’s equipment  
operate at a frequency higher  
than 100 kHz and will not  
work with the Home Producer.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
52  
53  
The PROG key (SHIFT + MENU)  
operates your secondary menus.  
Use the MENU + (Up), MENU –  
+
KEY INDEX  
TV Functions  
0 - 9  
(Down),  
(Left) and (Right)  
to  
The Digit keys (0-9) control direct  
channel access the same as the  
Digit keys on your original remote.  
navigate through your menus. If  
your original remote control had a  
Select/Enter key for use in your  
menu, use SELECT or ENTER.  
NOTE: If your original remote control required you to use an  
Enter key to change channels, use the ENTER key on the Home  
Producer after entering your channel number.  
The SELECT key is used to make  
The ENTER key operates the same  
as the Enter key on your original TV  
remote control.  
selections in the LCD Screen menu.  
It is also used to make selections in  
your on-screen TV menus.  
The TV/SAT key operates the same  
as the TV/VIDEO or INPUT key on  
your original TV remote control.  
The CLEAR key (SHIFT + SELECT)  
is used to exit or cancel selections in  
your on-screen TV menus.  
+
The PREV CH (Previous Channel)  
key operates the same as the LAST  
CHANNEL or RECALL key on your  
original TV remote control.  
The MENU + (Up), MENU – (Down),  
(Left) and (Right)  
are used  
to navigate through your on-screen  
menus. MENU + and MENU – are  
also used to navigate through the  
LCD Screen menu.  
The DISPLAY key (SHIFT + PREV  
+
CH) operates the display on your TV.  
The VCR transport keys (i.e., PLAY,  
REW, FF, STOP, PAU, and REC)  
access the features of your VCR.  
The PIP key accesses your TV’s  
Picture-in-Picture feature.  
The FREEZE key (SHIFT + PIP)  
freezes your Picture-In-Picture  
window.  
+
The SLEEP key (SHIFT + MUTE)  
accesses the sleep timer on your  
TV. Even if your TV does not have a  
sleep timer, the Home Producer can  
access its own built-in sleep timer.  
+
+
The SWAP key swaps the Picture-in-  
Picture window and the main picture.  
The MOVE PIP key moves the  
Picture-in-Picture window around  
your TV screen.  
The CENTER and REAR (SHIFT +  
CENTER) keys function the same  
as the ADD and DELETE keys on  
your original TV remote control.  
The MENU key operates the same  
as the MENU or OSD (On Screen  
Display) key on your original re  
mote. Use the MENU + (Up), MENU  
– (Down),  
(Left) and (Right)  
to navigate through your menus. If  
your original remote control had a  
Select/Enter key for use in your  
menu, use SELECT or ENTER.  
KEY INDEX (c ont.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
54  
55  
The MOVE PIP key moves the  
Picture-in-Picture window around  
your TV screen.  
KEY INDEX (c ont.)  
VCR Functions  
The MENU key operates the same  
as the MENU or OSD (On Screen  
Display) key on your original re  
mote. Use the MENU + (Up),  
The VCR transport keys (i.e., PLAY,  
REW, FF, STOP, PAU and REC)  
access the features of your VCR.  
As a safety feature on the Home  
Producer, you must press the REC  
key twice.  
MENU – (Down),  
(Left) and  
(Right) to navigate through your  
menus. If your original remote con-  
trol had a Select/Enter key for use in  
your menu, use SELECT or ENTER.  
NOTE: The SHIFT key accesses advanced features that are  
mapped under the VCR keys: SHIFT + PLAY = SLOW, SHIFT +  
REW = SLOW –, SHIFT + FF = SLOW +, SHIFT + STOP =  
EJECT and SHIFT + PAUSE = X2.  
The PROG key (SHIFT + MENU)  
operates your secondary menus.  
Use the MENU + (Up), MENU –  
0 - 9  
The Digit keys (0-9) control direct  
channel access the same as the  
Digit keys on your original remote.  
+
(Down),  
(Left) and (Right)  
to  
NOTE: If your original remote control required you to use an  
Enter key to change channels, use the ENTER key on the Home  
Producer after entering your channel number.  
navigate through your menus. If  
your original remote control had a  
Select/Enter key for use in your  
menu, use SELECT or ENTER.  
The ENTER key operates the same  
as the Enter key on your original  
VCR remote control.  
The SELECT key is used to make  
selections in the LCD Screen menu.  
It is also used to make selections in  
your on-screen VCR menus.  
The TV/SAT key operates the same  
as the TV/VCR key on your original  
VCR remote control.  
The CLEAR key (SHIFT + SELECT)  
is used to exit or cancel selections in  
your on-screen VCR menus.  
+
The PREV CH (Previous Channel)  
key operates the same as the LAST  
CHANNEL or RECALL key on your  
original VCR remote control.  
The MENU + (Up), MENU – (Down),  
(Left) and (Right)  
are used  
The DISPLAY key (SHIFT + PREV  
CH) operates the display on your  
VCR.  
to navigate through your on-screen  
menus. MENU + and MENU – are  
also used to navigate through the  
LCD Screen menu.  
+
The PIP key accesses your VCR’s  
Picture-in-Picture feature.  
The CENTER and REAR (SHIFT +  
CENTER) keys function the same  
as the ADD and DELETE keys on  
your original VCR remote control.  
The FREEZE key (SHIFT + PIP)  
freezes your Picture-In-Picture  
window.  
+
+
The SWAP key swaps the Picture-in-  
Picture window and the main picture.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
56  
57  
The PROG key (SHIFT + MENU)  
operates your secondary menus.  
Use the MENU + (Up), MENU –  
+
KEY INDEX (c ont.)  
Cable Functions  
0 - 9 The Digit keys (0-9) control direct  
(Down),  
(Left) and (Right)  
to  
navigate through your menus. If  
your original remote control had a  
Select/Enter key for use in your  
menu, use SELECT or ENTER.  
channel access the same as the  
Digit keys on your original remote.  
NOTE: If your original remote control required you to use an  
Enter key to change channels, use the ENTER key on the Home  
Producer after entering your channel number.  
The SELECT key is used to make  
The ENTER key operates the same  
as the Enter key on your original  
Cable Box remote control.  
selections in the LCD Screen menu.  
It is also used to make selections in  
your on-screen menus.  
The TV/SAT key operates the same  
as the A/B key on your original  
Cable Box remote control.  
The CLEAR key (SHIFT + SELECT)  
is used to exit or cancel selections in  
your on-screen menus.  
+
The PREV CH (Previous Channel)  
key operates the same as the LAST  
CHANNEL or RECALL key on your  
original Cable Box remote control.  
The MENU + (Up), MENU – (Down),  
(Left) and (Right)  
are used  
to navigate through your on-screen  
menus. MENU + and MENU – are  
also used to navigate through the  
LCD Screen menu.  
The DISPLAY key (SHIFT + PREV  
CH) operates the display on your  
+
Cable Box.  
The VCR transport keys (i.e., PLAY,  
REW, FF, STOP, PAU, and REC)  
access the features of your VCR.  
The PIP key accesses your Picture-  
in-Picture features.  
The FREEZE key (SHIFT + PIP)  
freezes the Picture-In-Picture window.  
+
The SLEEP key (SHIFT + MUTE)  
accesses the sleep timer on your  
TV. Even if your TV does not have a  
sleep timer, the Home Producer can  
access its own built-in sleep timer.  
+
The SWAP key swaps the Picture-in-  
Picture window and the main picture.  
The MOVE PIP key moves the  
Picture-in-Picture window around  
your TV screen.  
The CENTER and REAR (SHIFT +  
CENTER) keys function the same  
as ADD and DELETE keys on your  
original Cable Box remote control.  
+
The MENU key operates the same  
as the MENU or OSD (On Screen  
Display) key on your original re  
mote. Use the MENU + (Up), MENU  
The SUR (Surround) key functions  
the same as the FC or FAV (Favor-  
ite Channel) key on your original  
Cable Box remote control.  
– (Down),  
(Left) and (Right)  
to navigate through your menus. If  
your original remote control had a  
Select/Enter key for use in your  
menu, use SELECT or ENTER.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
58  
59  
The CLEAR key (SHIFT + SELECT)  
is used to exit or cancel selections in  
your Programming Menu.  
+
+
KEY INDEX (c ont.)  
DVD/LD/Cassette Functions  
The VCR transport keys (i.e., PLAY,  
The CENTER and REAR (SHIFT +  
CENTER) keys function the same  
as DISC A and DISC B keys on  
your original remote control.  
REW, FF, STOP, PAU and REC)  
access the features of your  
Cassette Deck or DVD/LD Player.  
NOTE: The SHIFT key accesses advanced features that are  
mapped under the VCR keys: SHIFT + PLAY = SLOW, SHIFT +  
REW = SLOW –, SHIFT + FF = SLOW +, SHIFT + STOP =  
EJECT and SHIFT + PAUSE = X2.  
The SUR (Surround) key functions  
the same as the DISC key on your  
original remote control.  
0 - 9  
The Digit keys (0-9) control direct  
channel access the same as the  
Digit keys on your original remote.  
DSS & Satellite Functions  
0 - 9 The Digit keys (0-9) control direct  
NOTE: If your original remote control required you to use an  
Enter key to change channels, use the ENTER key on the Home  
Producer after entering your channel number.  
channel access the same as the  
Digit keys on your original remote.  
The ENTER key operates the same  
as the Enter key on your original  
remote control.  
NOTE: If your original remote control required you to use an  
Enter key to change channels, use the ENTER key on the Home  
Producer after entering your channel number.  
The ENTER key operates the same  
as the Enter key on your original  
Satellite remote control.  
The DVD key operates the same as  
the DVD/LD key on your original LD  
or DVD Player remote control.  
The DISPLAY key (SHIFT + PREV  
CH) operates the display on your LD  
or DVD Player.  
The TV/SAT key operates the same  
as the TV/SAT key on your original  
Satellite remote control.  
+
The MENU key operates the same  
as the Menu or Program key on  
your original remote.  
The PREV CH (Previous Channel)  
key operates the same as the LAST  
CHANNEL or RECALL key on your  
original Satellite remote control.  
The SELECT key operates the  
same as the CHAPTER button on  
your original DVD or LD Player  
remote control.  
The DISPLAY key (SHIFT + PREV  
CH) operates the display on your  
Satellite receiver.  
+
The MENU key operates the same  
as the MENU or OSD (On Screen  
Display) key on your original re  
mote. Use the MENU + (Up),  
The PIP key operates the same as  
the VIEW key on your original  
Satellite remote control.  
MENU – (Down),  
(Right) to navigate through the  
LCD screen menu.  
(Left) and  
The MOVE PIP key operates the  
same as the NEXT key on your  
original Satellite remote control.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
60  
61  
The MENU + (Up) and MENU –  
(Down) keys access REAR LEVEL +  
and REAR LEVEL – respectively.  
KEY INDEX (c ont.)  
DSS & Satellite Functions (cont.)  
The MENU key operates the same  
MENU  
(Left) and MENU  
(Right) access BALANCE LEFT and  
BALANCE RIGHT.  
as the MENU or OSD (On Screen  
Display) key on your original re  
mote. Use the MENU + (Up),  
MENU – (Down),  
(Right) to navigate through your  
NOTE: The SHIFT key accesses advanced features that are  
mapped under the MENU keys: SHIFT + MENU + = CENTER  
LEVEL +, SHIFT + MENU – = CENTER LEVEL –, SHIFT +  
(Left) and  
MENU  
= DELAY – , and SHIFT + MENU  
= DELAY +.  
menus. If your original remote con-  
trol had a Select/Enter key for use in  
your menu, use SELECT or ENTER.  
The SLEEP key (SHIFT + MUTE)  
accesses the sleep timer on your  
Receiver. Even if your Receiver  
does not have a sleep timer, the  
Home Producer can access its own  
built-in sleep timer.  
+
Receiver/Tuner Functions  
0 - 9  
The Digit keys (0 - 9) access the  
different inputs of your Receiver.  
The SUR (Surround) key functions  
the same as the Surround Mode  
key on your original remote control.  
The TV/SAT key operates the same  
as the INPUT key on your original  
Receiver remote control.  
The CENTER and REAR (SHIFT +  
CENTER) keys function the same  
as the Center Mode and Rear  
Mode keys on your original  
The PREV CH (Previous Channel)  
key operates the same as the RAN-  
DOM (CD function) key on your  
original remote control.  
+
Receiver remote control.  
The DISPLAY key (SHIFT + PREV  
CH) operates the display on  
your Receiver.  
+
The MENU key operates the same  
as the PROGRAM key on your orig-  
inal remote control.  
Amplifier Functions  
0 - 9 The Digit keys (0 - 9) access the  
different inputs of your Amplifier.  
The SELECT key operates the  
TAPE MON function on your origi-  
nal Receiver remote control.  
The TV/SAT key operates the same  
as the INPUT key on your original  
Amplifier remote control.  
The CLEAR key (SHIFT + SE-  
LECT) is used to exit or cancel  
selections in your on-screen menus.  
+
The DISPLAY key (SHIFT + PREV  
CH) operates the display on  
your Amplifier.  
+
The transport keys (i.e., PLAY,  
REW, FF, STOP, PAU and REC)  
access the features of your  
CD Player.  
The SELECT key operates the  
TAPE MON function on your origi-  
nal Amplifier remote control.  
(continued on next page)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
62  
63  
CD Functions  
KEY INDEX (c ont.)  
Amplifier Functions (cont.)  
The transport keys (i.e., PLAY,  
REW, FF, STOP, PAU and REC)  
access the features of your  
CD Player.  
The MENU + (Up) and MENU –  
(Down) keys access REAR LEVEL +  
and REAR LEVEL – respectively.  
NOTE: The SHIFT key accesses advanced features that are  
mapped under the VCR keys: e.g., SHIFT + STOP = EJECT.  
MENU  
(Left) and MENU  
(Right) access BALANCE LEFT and  
BALANCE RIGHT.  
0 - 9  
The Digit keys (0 - 9) control direct  
track access the same as the digit  
keys on your original remote control.  
NOTE: The SHIFT key accesses advanced features that are  
mapped under the MENU keys: SHIFT + MENU + = CENTER  
LEVEL +, SHIFT + MENU – = CENTER LEVEL –, SHIFT +  
MENU  
= DELAY – , and SHIFT + MENU  
= DELAY +.  
The ENTER key operates the same  
as the Enter key on your original  
CD Player remote.  
The SLEEP key (SHIFT + MUTE)  
accesses the sleep timer on your  
Amplifier. Even if your Amplifier  
does not have a sleep timer, the  
Home Producer can access its own  
built-in sleep timer.  
+
The TV/SAT key operates the same  
as the A/B key on your original CD  
Player remote control.  
The PREV CH (Previous Channel)  
key operates the same as the RAN-  
DOM key on your original CD  
Player remote control.  
The SUR (Surround) key functions  
the same as the Surround Mode  
key on your original remote control.  
The CENTER and REAR (SHIFT +  
CENTER) keys function the same  
as the Center Mode and Rear  
Mode keys on your original  
The DISPLAY key (SHIFT + PREV  
CH) operates the display on  
your CD Player.  
+
+
Amplifier remote control.  
The MENU key operates the same  
as the PROGRAM key on your orig-  
inal remote control.  
The SELECT key operates the  
DISK SELECT function on your  
original CD Player remote control.  
The MENU + (Up) and MENU –  
(Down) keys access TRACK + and  
TRACK – respectively. MENU  
(Left) and MENU  
(Right) access  
DISK – and DISK + respectively.  
The SUR (Surround) key functions  
the same as the 10+ key on your  
original remote control.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
64  
65  
KEY INDEX (c ont.)  
WARRANTY  
Home Automation Functions  
The POWER key operates the  
One For All PRODUCTS  
Limited Warranty  
same as the ALL ON key of your  
original remote.  
One For All warrants, to the original purchaser only, that  
this product will be free from defects in materials and  
workmanship, under normal use, for ninety (90) days from  
the date of original purchase.  
0 - 9  
The Digit keys (0 - 9) control direct  
track access the same as the digit  
keys on your original remote control.  
This warranty does not cover damage or failures caused  
by products or services not supplied by One For All, or  
which result from accident, misuse, abuse, neglect, mis-  
handling, misapplication, faulty installation, set-up adjust-  
ment, improper maintenance, alteration, maladjustment of  
consumer controls, modifications, commercial use, or that  
is attributable to acts of God.  
The VOL +/- keys operate the same  
as the BRIGHT and DIM keys on  
your original remote control.  
The CH +/- keys operate the same  
as ON and OFF keys respectively.  
There are no express warranties except as listed above.  
OFA SHALL NOT BE LIABLE FOR INCIDENTAL OR  
CONSEQUENTIAL DAMAGES RESULTING FROM THE  
USE OF THIS PRODUCT OR ARISING OUT OF ANY  
BREACH OF WARRANTY. ALL EXPRESS AND IMPLIED  
WARRANTIES, INCLUDING THE WARRANTIES OF  
MERCHANTABILITY AND FITNESS FOR A PARTICU-  
LAR PURPOSE, ARE LIMITED TO THE WARRANTY  
PERIOD SET FORTH ABOVE. Some states do not allow  
the exclusion or limitation of incidental or consequential  
damages, or limitations on how long an implied warranty  
lasts, so the above exclusions or limitations may not  
apply to you. This warranty gives you specific legal rights  
and you may also have other rights which vary from state  
to state.  
The MUTE key operates the same  
as the ALL OFF key on your origi-  
nal remote control.  
To obtain warranty service for a defective product during  
the warranty period, please return the product, preferably  
in the original carton, along with your purchase receipt, to  
the store of original purchase. A note detailing the com-  
plaint would be helpful. The store, at its option, will  
replace or repair this product if found to be defective.  
One For All  
(330)-405-8655  
Download from Www.Somanuals.com. All Manuals Search And Download.  
66  
Copyright 1999 by Universal Electronics Inc. No  
part of this publication may be reproduced, trans-  
mitted, transcribed, stored in any retrieval system,  
or translated to any language, in any form or by any  
means, electronic, mechanical, magnetic, optical,  
manual, or otherwise, without the prior written per-  
mission of Universal Electronics Inc.  
One For All® and Home Producer are trademarks of  
Universal Electronics Inc.  
One For All® is designed for compatibility in North  
America excluding Mexico.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
URC-9800 REV A  
Home Producer  
M9800  
8/99  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Miele Cooktop KM5600 User Manual
MTD Lawn Mower 112 112 033 User Manual
MTD Snow Blower 31A 020 900 User Manual
Multiquip Power Roller GX390K1SM32 User Manual
Murray Lawn Mower 425620x92B User Manual
Nilfisk ALTO Air Compressor CLE80 User Manual
Omnimount TV Video Accessories Modena 55FP User Manual
Onkyo Car Stereo System TX NR929 User Manual
Panasonic Personal Computer CF F9 User Manual
Patton electronic Network Card Model 1065 User Manual