Crown
Curtis Mathes
Daewoo
0180, 0039
These GLOW keys are
made of a phosphorescent
material that Glows-in-the-
dark. To activate the
“GLOW” Feature, you must
expose the GLOW Keys to
bright light. The lenght of
time the GLOW Keys
remain illuminated will be
determined by the lenght of
time the remote is exposed
to bright light.
Setting Up Your Components
0030, 0060, 0154, 0039
0092, 0451, 0019, 0039,
0091
0019
0145
0017, 0019
0000, 0185
0381, 0389, 0409
0236, 0463, 0019, 0154,
0177, 0178, 0179, 0180,
0181, 0182, 0183, 0185,
0270, 0280, 0282, 0158,
0038, 0039
0030
0154, 0159
0179
0171, 0179, 0180
0180
0047, 0051, 0055, 0451,
0021, 0027, 0029, 0178,
0279, 0282, 0135, 0174
0017, 0019, 0030
0019, 0030, 0178, 0409,
0001, 0002, 0032, 0039,
0106
0053, 0056, 0170, 0392
0179, 0180
0178
URC 4700
Access 4
Programming the One For All
Access 4 to operate your TV:
Daytron
Denon
Dumont
Electroband
Electrohome
Emerson
Locate the brand name of your TV and
then write it in the space below.
TV Brand: _____________________
User Manual
Locate the brand name of your TV in the
“SETUP CODES FOR TVs” section. The
brands are listed in alphabetical order
with the most popular codes listed first.
You will use one of these codes to
program your One For All Access 4 to
operate your TV.
The MUTE key operates the
same as the MUTE key on
your original remote.
MUTE
Overview
Envision
Fisher
Fujitsu
Funai
Futuretech
GE
Thank you for purchasing the One For
All® Access 4™ universal remote
control. Before you can use your new
remote, you will need to program it to
operate the specific home entertain-
ment components you wish to control.
Follow the instructions detailed in this
manual to set up your One For All
Access 4 and enjoy your new remote
control.
The SETUP key is used to
program your One For All
Access 4.
SETUP
To program the One For All Access 4
to operate your TV:
POWER
The POWER key operates
the POWER ON and OFF
for your TV, VCR and Cable
Converter.
Gibralter
Goldstar
1.
2.
Turn on your TV.
Press TV and release.
Press and hold SETUP until
the One For All Access 4’s
red light blinks twice, then
release SETUP.
TV
Gradiente
Grunpy
Hallmark
Harman/Kardon 0078
Harvard
Hitachi
SETUP
The RECALL key operates
the PREVIOUS CHANNEL
or LAST CHANNEL
RECALL feature of your TV,
VCR and Cable Converter.
Please note that most
VCRs do not have a LAST
or PREVIOUS CHANNEL
feature. If this is the case
with your VCR, then
RECALL will not have any
function in the VCR mode.
RECALL
Features and Functions
0180, 0068
The illustration below and the chart
immediately after describe the features
and functions of the One For All
Access 4 universal remote control. Use
the drawing to locate each key on the
remote, then refer to the chart for a
description of the corresponding
function each key performs.
0145, 0151, 0056, 0409,
0413, 0038, 0279, 0032
0054
0054
0000
0053, 0036, 0069, 0160,
0169, 0182
0046
0180
0106
0030, 0180, 0183, 0185,
0217, 0280, 0039
0216
0158, 0216
0052
0019, 0030
0024, 0046, 0078
3.
4.
5.
Enter the first four-digit TV
code listed for your brand in
the “SETUP CODES FOR
TVs” section. If you perform
this procedure correctly, the
red light will blink twice
when you enter the final
digit of your code.
Infinity
JBL
JCB
JVC
Janeil
KEC
KMC
KTV
SLEEP
The SLEEP key accesses
the sleep function of your
TV or Cable Converter,
provided the component
has a SLEEP TIMER
function.
POWER
Aim the One For All Access
4 at your TV and press
POWER
Kamp
AUX
CBL
POWER.Your TV should
turn off. If your TV does not
respond, repeat steps 2-4,
trying each code listed for
your brand until you find the
one that operates your TV.
Kawasho
Kaypani
Kenwood
Kloss
LG0056
LXI
VCR
TV
CH
The TV, VCR, CBL, and
AUX keys are used to
select the home entertain-
ment component you want
to control.
TV
VCR
0047, 0054, 0154, 0156,
0178, 0148
0016
0056
0185
0150, 0155, 0019, 0030,
0178
0019, 0030, 0056, 0060,
0091, 0185, 0216
0054, 0096, 0186, 0187,
0030, 0020, 0024, 0028,
0036, 0230, 0386, 0171,
0179
0016, 0015
0054, 0030
0250
VOL –
VOL
+
CBL
AUX
Logik
Luxman
MEI
CH
Your One For All Access 4
is now programmed to
operate your TV. Write your
TV code in the boxes to the
left for future reference.
MGA
The ENTER key operates
the same as the ENTER
key on your original remote.
REW
PLAY
FF
ENTER
VCR CONTROL
REC
MTC
STOP
PAUSE
Magnavox
The REC (Record), PAUSE,
REW (Rewind), PLAY, FF
(Fast Forward), STOP and
TV/VCR operate the same
as the keys on your original
VCR remote. As a safety
feature on the One For All
Access 4, you must press
the REC key twice.
REC
PAUSE
REW
Remember, if you want to use your
One For All Access 4 to operate your
TV, press the TV key first.
Majestic
Marantz
Matsushita
Megatron
Memorex
PLAY
TV/ VCR
ENTER
FF
STOP
0178, 0003, 0145
0150, 0154, 0056, 0178,
0016, 0106
0047, 0051, 0017, 0135,
0032, 0039
SETUP CODES FOR TVs
TV/ VCR
A-Mark
AOC
0003
Midland
0019, 0030, 0052, 0003,
0137, 0185
Installing the Batteries
Minutz
Mitsubishi
0021
Abex
Admiral
0032
0150, 0155, 0093, 0178,
0019, 0098, 0241
0093, 0055
0093, 0165, 0179, 0180,
Your One For All Access 4 requires
four (4) new AAA alkaline batteries.
To install the batteries:
0016, 0047
0046
0092
Motorola
Multitech
NAD
Adventura
Aiko
0180, 0217
Feature – Function
0156, 0166, 0178
0019, 0030, 0056, 0036,
0170
0092
0030, 0092, 0178
0430
0018
0180
0154, 0166, 0250
0093, 0165
0236
Akai
Alaron
0030, 0098
0179, 0183, 0216
1.
2.
3.
4.
On the back of the One For
All Access 4 , pull back on
the tab and lift the battery
cover off.
NEC
The Red Light (LED)
flashes red to show that the
remote is working.
Ambassador
Anam
Anam National
Archer
0177
0180, 0068
0055
0003
NTC
Nikko
Noblex
Noshi
Onwa
Optimus
Optonica
Orion
The function of GLOW keys
: VOL-/+, CH ▲/▲ and
DIGIT keys are shown below :
Astro Text
Audiovox
Baysonic
Belcor
Bell & Howell
Bradford
Brockwood
Broksonic
CCE
0379
0003, 0180
0180
0019
0154, 0016
0180
0019
0003
Match the + and - marks on
the batteries to the + and -
marks in the battery case,
then insert the batteries.
The VOL +/- (Volume Up/
VOL +
VOL —
Down) operate the
VOLUME UP/DOWN of
your home entertainment
components.
Panasonic
0250, 0051, 0055, 0162,
0226, 0338
Press the battery cover
back into place.
Penney
0047, 0156, 0060, 0178,
0018, 0019, 0021, 0027,
0030, 0051, 0149, 0002,
0003, 0135, 0032, 0039
0054, 0096, 0145, 0030,
0019, 0020, 0028
0054
0019, 0030, 0039
0166, 0038
0092, 0019, 0039
0051
0217, 0329
CXC
Candle
0180
The CH ▲/▲ (Channel Up/
Down) keys operate the
CHANNEL UP/DOWN
feature of your home
0030, 0056, 0186, 0046
CH
CH
Philco
Carnivale
Carver
Celebrity
Cineral
0030
0054, 0170
0000
0451, 0092
Test the unit by pressing
POWER. If the batteries are
inserted correctly, the red
light (LED) will blink once.
POWER
Philips
Pilot
Pioneer
Portland
Prism
Proscan
Proton
Pulsar
Quasar
entertainment components.
Citizen
0030, 0056, 0060, 0092,
0186, 0280, 0561, 0039,
The DIGIT keys (0-9)
operate the same as the
digit keys on your original
remote.
0046
0185
0056
NOTE: Removing the batteries for
more than 15 minutes will require you
to reprogram your remote.
0047
Clairtone
Concerto
Contec
Craig
0466, 0178, 0003, 0052
0017, 0019
0250, 0051, 0055, 0165
0180, 0185, 0158, 0157
0180
Download from Www.Somanuals.com. All Manuals Search And Download.
Locate the brand name of your 2nd TV
in the “SETUP CODES FOR TVs”
section. The brands are listed in
alphabetical order with the most
popular codes listed first. You will use
one of these codes to program your
One For All Access 4 to operate your
2nd TV.
NOTE: To search for the codes of your
other components, repeat Steps 1
through 5, only substitute the
appropriate device key (VCR, CBL or
AUX) for the component you are
searching for.
Northcoast
Novaplex
Oak
Optimus
Panasonic
Panther
Paragon
Philips
0314, 0671
0618
0019, 0007
0021
0021, 0107, 0000
0637
0000
0153, 0025, 0027, 0028,
0029, 0030, 0031, 0242,
0290, 0334, 0649
0753, 0533, 0144, 0023,
0260
3.
Enter the first four-digit
Cable Converter or DBS
Satellite code listed for your
brand in the “SETUP
CODES FOR CABLE
CONVERTERS” or “SETUP
CODES FOR DBS
SATELLITES” section. If
you perform this procedure
correctly, the red light will
blink twice when you enter
the final digit of your code.
Aim the One For All Access
4 at your Cable Converter
or DBS Satellite and press
POWER. Your Cable
Converter or DBS Satellite
should turn off. If your Cable
Converter or DBS Satellite
does not respond, repeat
steps 2-4, trying each code
listed for your brand until
you find the one that
*If you are searching for your VCR
code, you may want to use the PLAY
key instead of the POWER key to
search for your code. When your
VCR starts to play, press SETUP to
lock in your code.
To program the One For All Access 4
Pioneer
Popular
Mechanics
Prelude
Pulsar
to operate your 2nd TV:
1.
2.
Turn on your 2nd TV.
0400
0770
0000
0021
Press AUX and release.
Press and hold SETUP until
the One For All Access 4’s
red light blinks twice, then
release SETUP.
4.
POWER
AUX
LearningThe Codes
Programmed IntoThe
One For All Access 4
SETUP
RCA
RadioShack
Realistic
Recoton
Regal
Regency
Rembrandt
Runco
0015, 0315
0207, 0241
0400
0020, 0259, 0273, 0279
0002
0011, 0070
0000
0040
3.
4.
Enter the first four-digit TV
code listed for your brand in
the “SETUP CODES FOR
TVs” section. If you perform
this procedure correctly, the
red light will blink twice
when you enter the final
digit of your code.
If you have set up the One For All
Access 4 using the “Searching For
Your Code” procedure, you may need
to find out which four-digit code is
operating your equipment. Use this
procedure after you have set up your
components to find out which four-digit
code is operating your equipment. For
example, to find out which code is
operating your TV after setting up your
TV using the “Searching for Your Code”
procedure:
SL Marx
Samsung
0040, 0144
Scientific Atlanta 0477, 0008, 0017, 0006
Seam
Signal
operates your Cable
Converter.
0510
0015, 0040
0011
0021, 0307
0422, 0542
0003, 0015, 0047
0015, 0040, 0770
0015
0001
0310
0063
0258
0097
0146
0221
0040
Signature
Sprucer
StarSight
Starcom
Stargate
Starquest
Sylvania
TFC
5.
Your One For All Access 4
is now programmed to
operate your Cable
Converter or DBS Satellite.
Write your Cable Converter
or DBS Satellite code in the
boxes to the left for future
reference.
POWER
Aim the One For All Access
4 at your 2nd TV and press
POWER.Your 2nd TV should
turn off. If your 2nd TV does
not respond, repeat steps
2-4, trying each code listed
for your brand until you find
the one that operates your
2nd TV.
1.
Press TV and release.
Press and hold SETUP until
the One For All Access 4’s
red light blinks twice, then
release SETUP.
TV
SETUP
TV86
Tandy
Tatung
Teknika
TeleCaption
Teleview
Texscan
Timeless
Tocom
Toshiba
Tusa
Unika
NOTE: If your original cable converter
remote control did not have an “ON”
key, press CH▲ on the One For All
Access 4 to turn your Cable Converter
ON.
2.
3.
Press 9 - 9 - 0.
9 - 9 - 0
5.
Your One For All Access 4
is now programmed to
operate your 2nd TV. Write
your 2nd TV code in the
boxes to the left for future
reference.
0001
0418
0012, 0013, 0059
0000
For the first digit of your
four-digit code, press 1, wait
3 seconds and count the
number of times the red
light (LED) blinks on the
One For All Access 4. If the
light does not blink when
you press the number 1, the
digit is zero.
1
0015
Remember, if you want to use your
One For All Access 4 to operate your
Cable Converter or DBS Satellite,
press the CBL key first.
0022, 0153, 0207, 0241,
0309
0007
0003
0153, 0022, 0039, 0056,
0077, 0078, 0191, 0207,
0241
United Artists
United Cable
Universal
Remember, if you want to use your
One For All Access 4 to operate your
2nd TV, press the AUX key first.
SETUP CODES FOR CABLE
CONVERTERS
ABC
0001, 0003, 0007, 0008,
0011, 0013, 0014, 0017,
0047
0153, 0315
0022, 0207, 0241
0797, 0022, 0039, 0153,
0207, 0241, 0309
0267
0056
0056
0022
0022
0153, 0309
0153, 0309, 0315
0025, 0031
0232, 0233
0040, 0060
0019
0637
0002
0078
0797
4.
5.
6.
For the second digit, press
2, wait 3 seconds and count
the number of times the red
light (LED) blinks on the
One For All Access 4. If the
light does not blink when
you press the number 2, the
digit is zero.
Videoway
Viewstar
0250
2
3
4
0063, 0027, 0060, 0211,
0258, 0289
0525, 0000, 0054
0400
Searching ForYour Code
Allegro
Antronix
Archer
Zenith
Zentek
If your TV, VCR or Cable Converter
does not respond to the One For All
Access 4 after trying all of the codes
listed for your brand, or if your brand is
not listed at all, try searching for your
code. For example, after trying all of
the codes for your TV, you still cannot
get the One For All Access 4 to
SETUP CODES FOR DBS
SATELLITES
AlphaStar
Echostar
ExpressVu
General
Instrument
HTS
Hitachi
Hughes Network
Systems
Jerrold
Magnavox
Memorex
Panasonic
Philips
Primestar
RCA
Sony
BBT
Belcor
0772
0775
0775
Cable Star
Cabletenna
Cableview
Century
Citizen
Colour Voice
Comband
Comtronics
Contec
For the third digit, press 3,
wait 3 seconds and count
the number of times the red
light (LED) blinks on the
One For All Access 4. If the
light does not blink when
you press the number 3, the
digit is zero.
0361
0775
0819
operate your TV, then:
1.
2.
Turn on your TV.
0749
Press TV and release.
Press and hold SETUP until
the One For All Access 4’s
red light blinks twice, then
release SETUP.
TV
0627, 0361
0722, 0724
0724
Digi
Eastern
Electricord
Emerson
Everquest
Focus
FutureVision
GC Electronics
GE
GMI
Garrard
Gemini
General
Instrument
Goldstar
Goodmind
Hamlin
SETUP
0701
For the fourth and final digit,
press 4, wait 3 seconds and
count the number of times
the red light (LED) blinks on
the One For All Access 4. If
the light does not blink
0722, 0724
0627, 0361
0566
0639
0790
0015, 0040
0400
0649
0056, 0207
0232, 0233
0057
0153, 0309
0015, 0057, 0070, 0242
3. 9 - 9 - 1 Press 9 - 9 - 1.
Toshiba
Uniden
POWER
4.
Slowly alternate between
0724
pressing POWER* and TV
until your TV turns OFF.
Make sure that the One For
All Access 4 is aimed at
your TV during the search.
You may have to press this
sequence of buttons
TV
when you press the number
4, the digit is zero. Now you
have your four-digit code.
Programming the AUX key:
The AUX key is already set up to
accept codes for a second TV. If you
would like to set up the AUX key for a
second TV, follow the instructions listed
below. If you would like the AUX key to
control a second VCR or Cable
Converter, follow the instructions in the
“Re-assigning Device Keys” section to
re-assign the AUX key to accept VCR
or Cable Converter codes. If you are
setting up a second TV:
0476, 0003, 0011
0040, 0144
0797
0259, 0009, 0020, 0034,
0273
0011
NOTE: To find out the code for your
other components, repeat Steps 1
through 6, only substitute the
appropriate device key (VCR, CBL or
AUX) for the component code you wish
to learn.
(POWER* then TV) up to
100 times to search the
entire library of codes.
Hitachi
Hytex
Jasco
Jerrold
0007
0153, 0309, 0315
0476, 0003, 0012, 0014,
0011, 0015, 0024, 0047
0440
0033
0027, 0069, 0334
0000
SETUP
5.
When your TV turns OFF,
press and release SETUP
to lock in the code for your
TV. Your One For All Access
4 is now programmed to
operate your TV.
Linsay
Macom
Magnavox
Memorex
Movie Time
NSC
Locate the brand name of your 2nd TV
and then write it in the space below.
0063, 0078, 0156
0063, 0070, 0156
2nd TV Brand: __________________
Download from Www.Somanuals.com. All Manuals Search And Download.
Now, whenever you press
VOL +, VOL - or MUTE your Cable
Converter or VCR will control the
volume.
This product has been discontinued and is no longer supported.
Re-Assigning Device
Keys
You can use the One For All Access 4
to operate a second TV or a second
VCR or any combination of four home
entertainment components. For
example, you may want your One For
All Access 4 to control 1 TV, 1 Cable
Converter and 2 VCRs. To accomplish
this, you must re-assign the AUX key
to operate the desired component, in
this case, a second VCR. The chart
below shows you how to re-assign a
particular device key and then set up
your new component.
To change the Volume Lock setting on
the One For All Access 4 so each
mode controls its own volume:
SETUP
1.
Press and hold SETUP until
the One For All Access 4’s
red light blinks twice, then
release SETUP.
2.
3.
Press 9 - 9 - 3.The One For
All Access 4’s red light will
blink twice.
Press and release VOL +.
The One For All Access 4’s
red light will blink twice.
9 - 9 - 3
TV to VCR SETUP* + 992 + VCR +
TV + TV + SETUP* +
VOL +
VCR code.
TV to CBL
VCR to TV
SETUP* + 992 + CBL +
TV + TV + SETUP* +
Cable/DBS code.
Now, whenever you press
VOL +, VOL - or MUTE on the One For
All Access 4 each component will
control its own volume.
SETUP* + 992 + TV +
VCR + VCR + SETUP*
+ TV code.
Trouble Shooting
VCR to CBL SETUP* + 992 + CBL +
VCR + VCR + SETUP*
Problem
Solution
+ Cable/DBS code.
Red light not
blinking when
you press a
key?
Replace the batteries
with four (4) new AAA
alkaline batteries.
CBL to TV
SETUP* + 992 + TV +
CBL + CBL + SETUP*
+ TV code.
One For All® is a trademark of Universal Electronics Inc.
The red light
Make sure you press
CBL to VCR SETUP* + 992 + VCR +
CBL + CBL + SETUP*
+ VCR code.
Copyright 1998 by Universal Electronics Inc. No part of this publication may be repro-
duced, transmitted, transcribed, stored in any retrieval system, or translated to any
language, in any form or by any means, electronic, mechanical, magnetic, optical,
manual, or otherwise, without the prior written permission of Universal Electronics Inc.
blinks when you the device key first, then
press a key but
you receive no
response from
your home
entertainment
component?
aim your One For All
Access 3 at your home
entertainment
AUX to TV
SETUP* + 992 + TV +
AUX + AUX + SETUP*
+ TV code.
component. Also make
sure that you are within
15 feet of the
component you are
trying to operate before
using your remote.
AUX to VCR SETUP* + 992 + VCR +
AUX + AUX + SETUP*
+ VCR code.
This One For All® product is designed for compatibility in North America
excluding Mexico.
The One For All
Try all of the codes
listed for your brand of
AUX to CBL SETUP* + 992 + CBL +
AUX + AUX + SETUP*
Access 4 does
URC-4700 - One For All Access 4 With Glow Key
not operate your home entertainment
+ Cable/DBS code.
home
component in the
“SETUP CODES”
entertainment
components or
is not
*NOTE: Here you must hold SETUP
until the One For All Access 4’s red
light blinks twice.
section. Many setup
codes may allow for
partial functionality,
however, only one set
up code will operate
your home entertain-
ment component
World Wide Web:
performing
commands
properly?
Volume Lock
Volume Lock allows the user to
designate which component will control
the volume in the TV, VCR and CBL
modes. To set the Volume Lock to the
TV mode:
correctly. Make sure all
of the components
that you are setting up
can be operated with
an infrared remote
control.
1.
SETUP
Press and hold SETUP until
the One For All Access 4’s
red light blinks twice, then
release SETUP.
Problems
programming a
TV/VCR
Use the VCR set-up
codes for your brand.
Some combo units,
however, may require
both a TV code to
control volume and a
VCR code for the
remaining functions.
combo?
9 - 9 - 3
2.
3.
Press 9 - 9 - 3. The One For
All Access 4’s red light will
blink twice.
TV
Press and release TV.The
One For All Access 4’s red
light will blink twice.
VCR not
recording?
As a safety feature on
the One For All Access
4, you must press the
REC key twice.
Now, whenever you press
VOL +, VOL - or MUTE in the VCR or
CBL mode your TV will control the
volume.
CH▲/▲
Due to RCA design
(1983-1987), only the
original remote control
will operate these
(Channel
Up/Down) and
RECALL not
To change the Volume Lock setting on
the One For All Access 4 to the VCR or
CABLE mode:
working for your functions.
RCA TV?
Problems
changing
channels?
If your original remote
control required an
SETUP
1.
Press and hold SETUP until
the One For All Access 4’s
red light blinks twice, then
release SETUP.
ENTER keystroke when
changing channels,
press the ENTER key
on the One For All
9 - 9 - 3
2.
3.
Press 9 - 9 - 3. The One For
All Access 4’s red light will
blink twice.
Access 4 after you enter
the channel number.
Keypad
scrambled?
Press and hold SETUP
until the One For All
Access 4’s red light
blinks twice. Release
SETUP and enter
9-8-7.
Press and release CBL or
VCR. The One For All
Access 4’s red light will blink
twice.
CBL
VCR
Download from Www.Somanuals.com. All Manuals Search And Download.
|