Instruction Manual
Fat Loss MONITOR
with Scale
Model HBF-400
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
Thank you for purchasing the OMRON® HBF-400 Fat Loss MONITOR with Scale.
Fill in for future reference.
DATE PURCHASED:
SERIAL NUMBER:
Staple your purchase receipt here
The Fat Loss Monitor with Scale is easy to understand. The monitor displays the calculated value of
body fat percentage using the BI (Bioelectrical Impedance) Method and indicates the BMI (Body Mass
Index) in four ranges. Set your personal data. Push the power switch on, select your personal ID number,
and step onto the measurement platform. Your calculated body fat percentage and body mass index is
displayed in an easy-to-see screen. The personal memory function stores up to four personal profiles.
The memory function stores the results of the last measurement taken for each personal ID number.
Your HBF-400 comes with the following components:
•
•
•
Main Unit
Instruction Manual
4 “AA” Batteries
Read all the information in the instruction book before using the unit.
WARNING!
This monitor cannot be used with a cardiac pacemaker or other implanted medical devices.
The Fat Loss MONITOR with Scale passes an extremely weak electrical current of 50kHz and less
than 500 µA through your body when taking a measurement to determine the amount of fat tissue.
This weak electrical current is not felt while using the monitor. Do not use, or allow others to use,
this monitor if fitted with a cardiac pacemaker or other medical device.
SAVE THESE INSTRUCTIONS
3
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY NOTES
To assure the correct use of this product basic safety measures should always be followed
including the precautions listed below:
þ Read all information in the instruction book and any other literature included in the box
before using the unit.
þ Consult your physician or healthcare provider before beginning a weight reduction or
exercise program.
þ Consult your physician before using this monitor when pregnant.
þ Do not step on the edge of the measurement platform or jump on the measurement platform.
þ Do not step on the measurement platform when your body or feet are wet, for example after
taking a bath or shower.
þ Do not use the unit on slippery surfaces such as tile floors or wet floors.
þ Should battery fluid leak and contact your eyes or skin, immediately rinse with plenty of
clean water. Immediately contact your physician.
þ Persons with disabilities or physically frail should be assisted by another person when using
this monitor.
þ Operate the unit only as intended. Do not use for any other purpose.
þ This unit is intended for home use only. It is not intended for professional use in hospitals
or other medical facilities. This unit does not support the standards required
for professional use.
þ Properly dispose of batteries according to applicable local regulations.
þ Do not disassemble or modify the unit. Changes or modifications not approved by
Omron Healthcare will void the user warranty.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
USEFUL INFORMATION
What is Body Fat Percentage?
Body fat percentage refers to the amount of body fat mass in regards to
the total body weight described in a percentage.
Fat mass
This OMRON Fat Loss MONITOR with Scale will provide your specific
body fat percentage and body weight. It is also an excellent tool to
estimate your body fat percentage and measure body weight on
a continuous schedule. Body fat percentage (%) = {Body fat mass
(pound) / Body weight (pound)} × 100
Fat-free mass
Body
Weight
Bones
Blood
Muscles
Water
Body fat readings may be affected by the change of water content in
the body. A person's hydration level and blood circulation may have an
effect on their body fat reading. In the table below are some situations which could affect the reading.
Cause of Fluctuations
Examples of Fluctuation
Water and food intake
1 to 2 hours after breakfast, lunch, or dinner
After taking a bath or shower, immediately after
exercising, in extreme environments (warm or cold),
during illness or extreme fatigue
Changes in blood circulation
Principles of Body Fat Percentage Calculation
The OMRON Fat Loss MONITOR with Scale estimates the body fat percentage by the Bioelectrical
Impedance (BI) method.
What is the Bioelectrical Impedance Method?
Muscles, blood vessels and bones are body tissues having a high water content that conduct electricity
easily. Body fat is tissue that has little electrical conductivity. The Fat Loss MONITOR with Scale sends
an extremely weak electrical current of 50 kHz and less than 500 µA through your body to determine the
amount of fat tissue.
This weak electrical current is not felt while operating the Fat Loss MONITOR with Scale.
Correct posture and consistent measuring conditions need to be maintained for the best results.
How to estimate the body fat percentage.
DXA (Dual Energy X-Ray Absorptiometry) has been the established method for accurate evaluation
of body composition. OMRON has used research information from several hundred people using the
DXA method to develop the formula by which the Fat Loss MONITOR with Scale works. The body fat
mass and body fat percentage is calculated by a formula that includes five factors:
electrical resistance, height, weight, age and gender.
What is the DXA method?
The DXA method uses two different frequency X-Rays and rates of absorption of the body and
determines the value based on the difference between the two. OMRON has collected information on
people from 10 to 80 years of age using this method.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
USEFUL INFORMATION
The reason calculated results may differ from actual body fat percentage
There are certain conditions, such as with dialysis patients, when significant differences may occur
between the estimated and actual body fat values.
These differences may be related to changing ratios of body fluid and/or body composition.
NOTE: The body fat percentage measured by this unit may significantly differ from the actual body
fat percentage in the following situations:
• Children in growth stage
• Elderly people
• People with a fever
• Body builders or highly trained athletes
• Patients undergoing dialysis
• Patients with osteoporosis who have very low bone density
• Women who are pregnant
• Post-menopausal women
• People having swelling
Recommended Measurement Times
Understanding the normal changes in your body fat percentage can help you in preventing or reducing
obesity. Being aware of the times when the body fat percentages shift within your own daily schedule
will assist you in obtaining an accurate trending of your body fat. It is recommended to use this unit in
the same environment and daily circumstances. (See chart)
6
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO INTERPRET THE
CALCULATED RESULTS
Body fat percentage
Displays the body fat mass as the percentage of body weight.
NOTE: The age range for the body fat percentage
classification is 20 to 79 years old.
Body fat percentage classification
Displays “–”, “0”, “+”, “++”
with 12 levels of Bar display.
BMI
BMI is an internationally used index to show the body condition by checking
the balance between the height and the weight.
It is calculated by the following formula:
BMI: Body Mass Index = (weight in pounds x 703) / (height in inches) / (height in inches)
BMI classification
Displays “–”, “0”, “+”, “++”.
with 12 levels of Bar display.
Recommended Body Fat Ranges and BMI
Low (-)
(BMI < 18.5)
Normal (0)
(BMI 18.5 - 24.9)
High (+)
(BMI 25.0 - 29.9)
Very High (++)
(BMI ≥ 30.0)
Gender
Female
Age
< 21.0
< 23.0
< 24.0
< 8.0
< 11.0
< 13.0
21.0 - 32.9
23.0 - 33.9
24.0 - 35.9
8.0 - 19.9
11.0 - 21.9
13.0 - 24.9
33.0 - 38.9
34.0 - 39.9
36.0 - 41.9
20.0 - 24.9
22.0 - 27.9
25.0 - 29.9
≥ 39.0
≥ 40.0
≥ 42.0
≥ 25.0
≥ 28.0
≥ 30.0
20-39
40-59
60-79
20-39
40-59
60-79
Male
Based on NIH/WHO guidelines for BMI
Based on Gallagher et al., American Journal of Clinical Nutrition, Vol. 72, Sept. 2000
The above index refers to the values for obesity judgment proposed by WHO,
the World Health Organization.
K
7
Download from Www.Somanuals.com. All Manuals Search And Download.
KNOW YOUR UNIT
Main Unit
Measurement Platform
Display
Electrodes
Heel Electrodes
Battery Cover
Electrodes
Power Switch
Heel Electrodes
USER Button
GUEST/MEMORY
Button
Battery
Compartment
DOWN Button
UP Button
SET Button
Display
Display Mode Indicator
:Weight
Memory Indicator
:Body Fat Percentage
:BMI
Measurement Results
GUEST Indicator
Age Indicator
Height Indicator
Personal Profile Number
Low Battery Indicator
Gender Indicator
Measurement Progress /
Body fat percentage and
BMI Classification Bar
Components
Instruction Manual
Four AA Batteries
8
Download from Www.Somanuals.com. All Manuals Search And Download.
BATTERY INSTALLATION
1. Locate the battery cover on the back of the unit.
2. Press the tab in the direction of the arrow at the top of the battery
compartment and remove the battery cover.
3. Install 4 “AA” size batteries so the + (positive) and - (negative)
polarities match the polarities of the battery compartment as indicated.
4. Replace the battery cover.
BATTERY REPLACEMENT
Measurement values and Personal ID’s are stored in the memory during battery replacement.
Low Battery Indicator
When the Low Battery Indicator appears on the display screen remove all four worn batteries.
Replace with four new batteries at the same time.
NOTE:
• New batteries will last for approximately one year if the unit is used four or less than four times per
day. Trial batteries supplied with the unit may have a shorter life.
• Remove the batteries if you do not intend to use the unit for a period of three months or longer before
placing the device in storage.
• Dispose of used batteries according to applicable local regulations.
CAUTION:
• Should battery fluid leak and contact your eyes or skin immediately rinse with plenty of
clean water. Immediately contact your physician.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING PERSONAL DATA
The Fat Loss Monitor with Scale provides two options to enter your personal data.
• Select USER and a Personal Profile Number to save your personal data. The monitor will store 4
personal profiles in the memory. Select a number 1 through 4. Use this number to enter your personal
data and when taking a measurement.
• Select GUEST/MEMORY if you do not want your personal data stored in the memory. When you
select the GUEST mode you will need to enter your personal data before taking each measurement.
NOTE: The unit will automatically turn off after five minutes if no button is pressed.
1. Turn the monitor ON.
Press the Power Switch. The CAL symbol blinks on the display followed by the 0.0 lb symbol as
illustrated below.
NOTE: Wait for the 0.0 lb symbol to appear before proceeding.
2. Select USER or GUEST as your personal data option.
A. USER with Personal Profile Number
Press the USER button.
The Personal Profile Number changes each time you press the
USER button as follows:
Select the Personal Profile Number for your data.
NOTE:
1) If no information has been entered for the Personal Profile Number
you selected, the number and the symbols for gender, age, and height
blink on the display.
2) If personal data has been entered for the number, the Personal Profile
Number blinks on the display.
Press the SET button.
The default value “40” for age blinks on the display.
B. GUEST
Press the GUEST/MEMORY button.
The GUEST indicator appears.
Press the SET button.
The default value “40” for age blinks on the display.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING PERSONAL DATA
3. Enter your Personal Data.
SETTING THE AGE
Set the age between 10 and 80.
1) Press the
UP button or
DOWN button to
change the age.
The value changes in increments of 1 year.
Press and hold the button to advance at a faster speed.
2) Press the SET button.
The age is set.
The gender symbols blink on the display.
SETTING THE GENDER
Set the gender to
MALE OR FEMALE.
1) Press the
UP button or DOWN button to
change the gender.
2) Press the SET button.
The gender is set.
The default value 5’3” for height blinks on the display.
SETTING THE HEIGHT
Set the height between 3’4” and 6’6 3/4”.
1) Press the
UP button or
DOWN button to
change the height.
The value changes in increments of 1/4''.
Press and hold the button to advance at a faster speed.
2) Press the SET button.
The height is set.
USER - Personal Data entered with a Personal
Profile Number is stored in the memory.
GUEST - Personal Data is not stored in the memory
after the measurement results appear on the display.
The age, gender and height appear on the display.
The CAL symbol blinks on the display followed by
the 0.0 lb symbol. You can take a measurement
using this Personal Profile Number.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANGING PERSONAL DATA
CHANGING PERSONAL PROFILES
If personal data changes, the information stored in the Personal Profile Number for the age, gender
or height setting must be changed.
1. Turn the monitor ON.
Press the Power Switch. The CAL symbol blinks on the display followed by the 0.0 lb.
2. Press the USER button.
Select the Personal Profile Number you want to change.
3. Press the SET button.
The CAL symbol blinks on the display followed by the 0.0 lb.
4. Press the SET button again.
The current value set for the age setting blinks on the display.
5. Adjust the settings you need to change.
Press the
UP button or
DOWN button to adjust the setting. Then press the SET button.
NOTE: If no change is needed, press the SET button to proceed to the next setting.
The CAL symbol blinks on the display followed by the 0.0 lb symbol. You can take a measurement.
DELETING PERSONAL PROFILES
All the personal data stored in a Personal Profile Number can be deleted.
NOTE: When you delete the personal data, the results of the previous measurement stored in the
memory for this Personal Profile Number will also be deleted.
1. Turn the monitor ON.
Press the Power Switch. The CAL symbol blinks on the display followed by the 0.0 lb.
2. Press the USER button.
Select the Personal Profile Number you want to change.
3. Press the SET button.
The CAL symbol blinks on the display followed by the 0.0 lb.
4. Press the SET button again.
The current value set for the age setting blinks on the display.
5. Press the GUEST/MEMORY button for two seconds.
The personal data is deleted from the memory. The Clr symbol appears on the display followed by the
Profile Number and the symbols for gender, age and height as illustrated below.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO TAKE A MEASUREMENT
When to avoid taking a measurement
The estimated body fat percentage may differ significantly from the actual because the water content in
the body is changing when a measurement is taken under the following physical conditions: immediately
after vigorous exercise, immediately after a bath or sauna, after drinking alcohol or a large amount of
water, after eating a meal (1 to 2 hours).
Before taking a measurement your personal data must be entered.
If GUEST is used, you will need to enter your personal data each time you take a measurement.
1. Turn the monitor ON.
Press the Power Switch. The CAL symbol blinks on the display followed by the 0.0 lb symbol
as illustrated below.
NOTE: Wait for the 0.0 lb symbol to appear before proceeding.
2. Select your Personal Data Option.
A. USER with Personal Profile Number
Press the USER button. Select your Personal Profile Number.
How to view previous measurement results before taking a measurement.
After selecting your Personal Profile Number press the
GUEST MEMORY button. The results are displayed repeatedly
with the memory indicator in the following order
WEIGHT [ %FAT [ BMI
If an error occurred for the body fat percentage in the previous
measurement '' _ _ _ _ '' will display for % FAT.
When finished viewing the results press the Power Switch to turn the monitor off.
To take a measurement turn the monitor on and select your Personal Profile Number again.
Press the SET button.
The CAL symbol blinks on the display followed by the 0.0 lb symbol.
NOTE: Wait for the 0.0 lb symbol to appear before proceeding.
B. GUEST
Press the GUEST/MEMORY button. Enter your personal data.
NOTE: Refer to page 9 for Setting Personal Data.
Press the SET button.
The CAL symbol blinks on the display followed by the 0.0 lb symbol.
NOTE: Wait for the 0.0 lb symbol to appear before proceeding.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO TAKE A MEASUREMENT
NOTE: If the soles of your feet are too dry, the temperature of your feet or the electrodes are extreme
cold, it will not be possible to obtain stable measurements. These conditions may cause an error indicator
to display or inaccurate results. Be aware of these conditions during colder months when the air is dry
and/or the temperature is low.
Condition
Action
Slightly moisten the soles of your feet with
a wet towel before taking a measurement.
Feet are too dry.
When you step onto the electrodes, the
electrodes feel too cold.
Leave the unit in a warm room for approximately
10 minutes to allow the electrodes to warm up.
Your body and feet are cold due to poor
blood circulation.
Immerse your feet in warm water or stay in
a warm room to allow your feet to warm up.
3. Step onto the Measurement Platform.
Make sure you are barefoot and the soles of your feet are clean and dry.
Position your feet on the electrodes as shown in the illustration to the right.
Make sure each of your heels is positioned on a heel electrode.
Stand with your weight evenly distributed on the measurement platform.
Remain still and do not move until the measurement is complete.
Heel Electrodes
Your weight will appear, then blink on the display. The indicators in the
measurement progress bar at the bottom of the display will begin
to appear from left to right.
When the measurement is completed, your weight is displayed again.
4. Step off the Measurement Platform.
The measurement results are automatically displayed repeatedly in the following order:
WEIGHT [ %FAT [ BMI.
Display
Weight: 0.0 lb to 330.0 lbs in 0.2lb increments
Body fat percentage: 5.0 to 60.0% in 0.1% increments
BMI: 7.0 to 90.0 in 0.1 increments
BMI Classification
Body Fat Percentage Classification
NOTE: Although the age range can be set between 10 and 80 years, the % FAT classification will
only display if the age is set between 20 and 79 years.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO TAKE A MEASUREMENT
Viewing Measurement Results
You can press the UP button to advance to the next measurement
result at any time while the results are automatically displayed.
Press the GUEST/MEMORY button to view the previous
measurement. The M indicator appears on the display. Press the
GUEST/MEMORY again to return to the current measurement results.
5. Turn the monitor off.
Press the Power Switch.
Measuring Weight Only
1. Turn the monitor ON.
Press the Power Switch. The CAL symbol blinks on the display followed by the 0.0 lb symbol
as illustrated below.
NOTE: Wait for the 0.0 lb symbol to appear before proceeding.
Your feet
2. Step onto the Measurement Platform.
Stand with your weight evenly distributed on the measurement platform.
Remain still and do not move until the measurement is complete.
3. Step off the Measurement Platform
4. Turn the monitor off.
Press the Power Switch.
NOTE: The monitor will automatically turn off after 5 minutes.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
ERROR INDICATORS
ERROR DISPLAY
CAUSE
CORRECTION
Make sure you are barefoot and the
soles of your feet are clean and dry.
Make sure your feet are correctly
positioned on the measurement platform.
Read “How to Take a Measurement”
on page 14.
Your toes and heels are
not positioned over the
electrodes correctly.
Remain still and do not move until
the measurement is complete.
Read “How to Take a Measurement”
on page 14.
The measurement position was not
stable or your feet were not
placed correctly.
Slightly moisten the soles of your
feet with a damp towel and retake
the measurement.
Feet are too dry.
Refer to the Conditions and Actions
Table on Page 14.
Check the settings entered for your
personal data. Change the settings
if needed. Retake the measurement.
If this error occurs again and the
settings are correct, measurements
cannot be taken.
The body fat percentage or BMI
values are outside the
measurement range.
Remove the batteries. Wait one minute.
Reinstall the batteries. Refer to Battery
Installation on page 9.
The unit is not set up correctly.
Press the power switch and turn the
monitor on. Retake the measurement.
You stepped onto the measurement
platform before 0.0 lb
was displayed.
Wait until 0.0 lb is displayed before
stepping onto the
measurement platform.
The unit was moved before 0.0 lb
was displayed.
Do not move the unit until 0.0 lb
is displayed.
Do not move until measurement
is complete.
Movement during measurement.
This unit can only be used by
people weighing less than 330 lb.
This unit can only be used by people
weighing less than 330 lbs.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING TIPS
PROBLEM
CAUSE AND SOLUTION
Low Battery Indicator
No power
No display appears on the unit
Check the battery installation for proper
placement of the battery polarities.
Replace all four worn batteries.
The weight value is displayed abnormally
low or high.
Place the monitor on a hard, level floor.
Refer to “When to avoid taking a measurement”
on page 13, and “Recommended Measurement
Times” on page 6.
The % FAT value is displayed abnormally
low or high.
Remove the batteries. Wait one minute.
Reinstall the batteries. Refer to “Battery
Installation” on page 9.
Other conditions
CARE AND MAINTENANCE
To keep your Fat Loss MONITOR with Scale in the best condition and protect the unit from damage
follow the directions below:
Clean the unit with a soft dry cloth. Avoid using any abrasive or volatile cleaners. The unit is not
waterproof; do not immerse the unit in water.
Store the unit in a safe and dry location. Do not expose the unit to direct sunlight, extreme hot or cold
temperatures or humidity. Thoroughly dry any moisture off the unit before storing. Store the unit safely
out of the reach of children.
Do not subject the unit to strong shocks, such as dropping the unit on the floor.
Remove the batteries if the unit will not be used for three months or longer.
Use the unit consistent with the instruction provided in this manual.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
QUICK REFERENCE GUIDE
Read all of the information in the instruction manual for the HBF-400 Fat Loss Monitor with Scale
before using the QUICK REFERENCE GUIDE.
WARNING!
This monitor cannot be used with a cardiac pacemaker or other implanted medical devices.
The Fat Loss MONITOR with Scale passes an extremely weak electrical current of 50kHz and less
than 500 µA through your body when taking a measurement to determine the amount of fat tissue.
This weak electrical current is not felt while using the monitor. Do not use, or allow others to use,
this monitor if fitted with a cardiac pacemaker or other medical device.
1. Turn the monitor ON.
2. Select one of the following personal data options:
Press the USER button.
Select your Personal Profile Number.
Press the GUEST/MEMORY button.
Enter your Personal Data.
Refer to page 10, Setting Personal Data.
3. Press the SET button.
NOTE: Wait for the 0.0 lb symbol to appear before proceeding.
4. Step onto the Measurement Platform.
Make sure you are barefoot and the soles of your feet are clean and dry. Position your feet on the
electrodes as shown in the illustration below. Make sure each of your heels is positioned on
a heel electrode. Remain still and do not move until the measurement is complete.
Heel Electrodes
Your weight will appear, then blink on the display. The indicators in the measurement progress bar at
the bottom of the display will begin to appear from left to right. When the measurement is completed,
your weight is displayed again.
5. Step off the measurement Platform.
The measurement results are automatically displayed repeatedly in the following order:
WEIGHT [ %FAT [ BMI.
6. Turn the monitor off.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
FCC STATEMENT
NOTE:
POTENTIAL FOR RADIO/TELEVISION INTERFERENCE (for U.S.A. only) This product has been tested and
found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful interference in a residential
installation. The product generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If the product does cause harmful interference to
radio or television reception, which can be determined by turning the product on and off, the user is encouraged
to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the product and the receiver.
• Connect the product into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
POTENTIAL FOR RADIO/TELEVISION INTERFERENCE
(for Canada only)
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set
out in the interference-causing equipment standard entitled “Digital Apparatus”, ICES-003 of the Canadian
Department of Communications.
Cet appareil numérique respecte les limites de bruits radioeléctriques applicables aux appareils numériques de
Clase B prescrites dans la norme sur le materiel brouilleur: “Appareils Numériques”, ICES-003 édictée
par le minister des communications.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY INFORMATION
Limited Warranty
Your HBF-400 Fat Loss Monitor with Scale, excluding the batteries, is warranted to be free from defects in
materials and workmanship appearing within 1 year from the date of purchase, when used in accordance with
the instructions provided with the unit. The above warranties extend only to the original retail purchaser.
We will, at our option, repair or replace without charge any monitor covered by the above warranties. Repair or
replacement is our only responsibility and your only remedy under the above warranties. To obtain warranty service
contact Omron Healthcare’s Customer Service by calling 1-800-634-4350 for the address of the repair location and the
return shipping and handling fee. Information for warranty service is available on our website at
Enclose the Proof of Purchase. Include a letter, with your name, address, phone number, and description of the
specific problem. Pack the product carefully to prevent damage in transit. Because of possible loss in transit,
we recommend insuring the product with return receipt requested.
ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE, ARE LIMITED TO THE
DURATION OF THE APPLICABLE WRITTEN WARRANTY ABOVE. Some provinces do not allow
limitations on how long an implied warranty lasts, so the above limitation may not apply to you.
OMRON SHALL NOT BE LIABLE FOR LOSS OF USE OR ANY OTHER INCIDENTAL,
CONSEQUENTIAL OR INDIRECT COSTS, EXPENSES OR DAMAGES. Some states do not allow
the exclusion or limitation of incidental or consequential damages, so the above exclusions may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state.
FOR CUSTOMER SERVICE
Visit our web site at:
Call toll free:
1-800-634-4350
20
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Model:
OMRON Fat Loss MONITOR with Scale - HBF-400
Weight display: 0.0 lb to 330.0 lbs. with 0.2 lb increment
Body fat percentage: 5.0 to 60.0% with 0.1% increment
BMI: 7.0 to 90.0 with 0.1 increment
Display:
Body fat percentage / BMI classification:
– (Low) / 0 (Normal) / + (High) / ++ (Very High) with 12 levels of Bar display
*The age range for the body fat percentage classification is 20 to 79 years old.
Height: 3’4” to 6’6 3/4”
Set Ranges:
Age: 10 to 80 years old
Gender: Male/Female
Power Supply:
Battery Life:
4 AA batteries
Approximately 1 year (when used four times a day)
Operating Temperature
and Humidity:
Storage Temperature
and Humidity:
External Dimensions:
Weight:
50°F to 104°F, 30% to 85% RH
-4°F to 140°F, 10% to 95% RH
Approximately 12 1/4” (w) x 11 7/8” (d) x 2 1/4” (h)
Approximately 4 5/8 lb (including batteries)
Main Unit, 4 AA Batteries, Instruction Manual
0 73796 82640 6
Components:
UPC Code:
NOTE: Specifications may be changed without prior notice.
MEMO
21
Download from Www.Somanuals.com. All Manuals Search And Download.
TRACK YOUR PROGRESS
Date
Time
Weight
Body Fat %
BMI
22
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Distributed by:
OMRON HEALTHCARE, INC.
1200 Lakeside Drive
Bannockburn, Illinois 60015
Made in China
© 2006 Omron Healthcare, Inc.
HBF-400INST Rev
9042754-1
Download from Www.Somanuals.com. All Manuals Search And Download.
|