transmiter (Tx) must attach to the receiver side of its
link partner; the receiver (Rx) must attach to the
transmiter.
Accessories
WARNING!
Wall Mounting Hardware Kit
USB Power Adapter Cable
4381
9130-2
9113-PS
Before inserting the Power Adapter, verify
that the power on the unit is appropriate
for your AC line voltage source.
miConverter™ 10/100 Media Converter
When using single-fiber (SF) media converter models,
the Tx wavelength on one end has to match the Rx
wavelength on the other. Based on this guideline, the
SF media converter models must be used in pairs,
such as the 1110-1-x matched with the 1111-1-x.
User Manual
US Domestic AC Power Adapter
Universal AC Power Adapter
(requires AC power cord)
9115-PS
POWER ADAPTER NOTICE:
Europe AC Power Adapter
United Kingdom AC Power Adapter
Australia AC Power Adapter
Japanese AC Power Adapter
European Connector Clip*
UK Connector Clip*
9116-PS-3
9116-PS-4
9116-PS-5
9116-PS-8
9116-3
This product should only be used with Omnitron Supplied
Power Unit model numbers 9113-PS, 9115-PS, 9130-2,
9116-PS-3, 9116-PS-4, 9116-PS-5 or 9116-PS-8.
LED INDICATORS:
GENERAL:
Function Legend Color
Off
On
Power
Pwr Amber No power
Power applied
This User Manual covers the following model numbers:
In order to guarantee performance when powering the
miConverter 10/100 with the USB Power Adapter cable
(P/N 9130-2), the USB adapter cable must be connected to
a Full-Powered USB Type-A port (5V, 500mA).
F/O Link-
Act
F/O
UTP
100
Green No link
Green No link
Solid = Link
Blink = Data Received
miConverter 10/100 Models
9116-4
Fiber Mode Type
Dual Fiber [DF] or Distance
Single-Fiber [SF]
Tx
Rx
Connector Types
ST SC
UTP Link-
Act
Solid = Link
Blink = Data Received
Australian Connector Clip*
Japanese Connector Clip*
9116-5
Wavelength Wavelength
[nm]
1310
1310
1310
1550
1310
1550
1310
1550
[nm]
1310
1310
1310
1550
1550
1310
1550
1310
9116-8
10(Off) /
100(On)
Green UTP at 10Mbps when UTP at 100Mbps
Note: Not all USB Type-A ports are Full-Powered
USB ports. The Full-Powered USB Type-A ports are
usually the USB ports found on computer cases or
on self-powered (powered by an AC adapter) USB
hubs.
MM / DF
SM / DF
SM / DF
SM / DF
SM / SF
SM / SF
SM / SF
SM / SF
5km
30km
60km
120km
20km
20km
40km
40km
1100-0-x 1102-0-x
1101-1-x 1103-1-x
1101-2-x 1103-2-x
*All spare Connector Clips are interchangeable with AC Power
Adapters 9116-PS-3, 9116-PS-4, 9116-PS-5 and 9116-PS-8
UTP Link is active
when UTP Link is
active
HDX(Off) /
FDX(On)
FDX Green Half-Duplex when
UTP Link is active
Full-Duplex when UTP
Link is active
-
-
-
-
-
1103-3-x
1110-1-x
1111-1-x
1110-2-x
1111-2-x
DESCRIPTION:
The miniature miConverter™ 10/100 is a rate-switching
UTP copper to 100BASE-FX fiber media converter that
provides cost-effective fiber extension and connectivity.
The miConverter 10/100’s UTP copper port can
automatically detect the speed, duplex-mode and
cross-over mode of the connected device.
MOUNTINGAND CABLE ATTACHMENT:
The miConverter 10/100 can be quick-mounted using
the included Velcro® strips, or permanentaly mounted
using the optional wall-mounting kit (P/N 4381).
When choosing power options, replace (-x) in the model number with
the suffix number that correspondes to the power supply of choice
below. Example: 1103-3-6 stands for 1103-3-x with USB Power Adapter
-1
-2
US Power Supply - 120Volt / 60Hz
Universal Power Supply (requires AC power cord) -
100-240Volt / 50-60Hz
Euro Power Supply - 100-240Volt / 50-60Hz
UK Power Supply - 100-240Volt / 50-60Hz
Australia Power Supply - 100-240Volt / 50-60Hz
USB Power Adapter Cable
Attach the UTP port of the miConverter 10/100 to a
10BASE-T or 100BASE-TX Ethernet device, via a
category 5 cable.
The 100BASE-FX fiber port operates in Full-Duplex mode
and supports single-mode or multimode fiber with ST or
SC fiber connectors. Single-fiber models feature
Bi-Directional fiber and support distances of up to 40km.
The various fiber model options are described in the table
on the first page.
-3
-4
-5
-6
-8
Attach the fiber port of the miConverter 10/100 to a
100BASE-FX Fast Ethernet device, via the fiber cable
of the appropriate mode and type.
Japanese Power Supply - 100-240Volt / 50-60Hz
For power supplies -3, -4, -5 and -8, country/region specific clips are used to
provide the necessary power connection.
When connecting the dual-fiber models, the miConverter
temperature, radiation, unusual dust, etc.), or improper
site preparation or maintenance.
SPECIFICATIONS:
SPECIFICATIONS (CONT):
Caution
All user-required operations can be performed without
opening the unit. Never attempt to open or remove the
cover or tamper with the unit.
Dimension
W:1.71" x L:4.10" x H:0.84"
miConverter 10/100 Specifications
No other warranty is expressed or implied. Omnitron
specifically disclaims the implied warranties of
merchantability and fitness for any particular purpose.
Weight
Description
Protocols
Miniature 10/100 UTP to 100 Fiber
Media Converter
without power adapter
with USB power adapter cable
with AC power adapter [US]
4 oz.
5 oz.
Warranty
10BASE-T, 100BASE-TX,
100BASE-FX
with 1536 bytes max. frame size,
IEEE 802.3 specification
Exclusive Remedies
12 oz.
18 oz.
This product is warranted to the original purchaser against
defects in material and workmanship for a period of TWO
YEARS from the date of shipment. A LIFETIME warranty
maybeobtainedbytheoriginalpurchaserbyREGISTERING
this product with Omnitron within 90 days from the date of
shipment. TO REGISTER, COMPLETEAND MAILOR FAX
THE ENCLOSED REGISTRATION FORM TO THE
INDICATEDADDRESS. Or you may register your product
During the warranty period, Omnitron will, at its option, repair
or replace a product which is proven to be defective.
with AC power adapter
[Universal]
The remedies provided herein are the Buyer’s sole and
exclusive remedies. Omnitron shall not be liable for any
direct, indirect, special, incidental, or consequential
damages, whether based on contract, tort, or any legal
theory.
Cable Types
Compliance
UL, CE, FCC Class A
UTP
EIA/TIA 568A/B,
Category 5 and higher
Temperature
Operational - Commercial
Storage
0 to +50oC
-50 to +80oC
Fiber
Multimode: 50/125, 62.5/125,
100/140 um
Single-mode: 9/125 um
Humidity
(non-condensing)
5% to 95%
Connector Types
Altitude
-100m to 4000m
UTP
RJ45
MTBF [hrs]
Fiber
Dual fiber: SC, ST
Single-fiber: SC
without power adapter
1,340,000
250,000
100,000
Forwarrantyservice, theproductmustbesenttoanOmnitron
designated facility, at Buyer’s expense. Omnitron will pay
the shipping charge to return the product to Buyer’s
designated US address using Omnitron’s standard shipping
method.
TECHNICAL SUPPORT:
For help with this product, contact Omnitron’s Tech.
Support:
with US or
Country/Region Specific
power adapter
LED Displays
Pwr, FO-Lk/Act, UTP-Lk/Act,
UTP-10/100, HDX/FDX
Power Requirements
DC Power
with Universal power adapter
0.5A @ 5VDC
Phone:
Fax:
(949) 250-6510
(949) 250-6514
DC Power Connector
2.5mm DC Jack - Center Positive
AC Power Adapter
[US]
100-120VAC/60Hz
0.03A @ 120VAC
Limitation of Warranty
Address: Omnitron Systems Technology, Inc.
140 Technology Drive, #500
The foregoing warranty shall not apply to defects
resulting from improper or inadequate use and/or
maintenance of the equipment by Buyer, Buyer-supplied
equipment, Buyer-supplied interfacing, unauthorized
modifications or tampering with equipment (including
removal of equipment cover by personnel not specifically
authorized and certified by Omnitron), or misuse, or
operating outside the environmental specification of the
product (including but not limited to voltage, ambient
AC Power Adapter
[Universal or
Country/Region Specific]
100-240VAC/50-60Hz
0.03A @ 120VAC
Warning
The operating description in this Instruction Manual is
for use by qualified personnel only. To avoid electrical
shock, do not perform any servicing of this unit other
than that contained in the operating instructions, unless
you are qualified and certified to do so by Omnitron
Systems Technology, Inc.
Irvine, CA 92618 USA
E-mail:
URL:
Form: 040-11000-001C 11/07
Download from Www.Somanuals.com. All Manuals Search And Download.
|