Omnitron Systems Technology Network Card 100Fx Tx User Manual

Plug-InPowerUnitmarkedClass2andratedat9Vdc, 1 Amp.  
UTP cable.  
2.This product should always be used only with Omnitron  
Supplied Power Unit model number 9113-PS.  
“Full-Duplex/Half-Duplex” Switch: When the “Auto-  
Negotiation/Manual” switch is in “Manual” position, the “Full-  
Duplex/Half-Duplex” switch determines the type of duplex  
operation mode.  
FlexPoint100Fx/Tx User Instructions  
WARNING!  
Description:  
Before inserting the Power Adapter, verify  
that the power on the unit is appropriate  
for your AC line voltage source.  
When the “Auto-Negotiation/Manual” switch is in “Auto-  
Negotiation” position, the “Full-Duplex/Half-Duplex” switch  
advertises its setting to the device connected to the UTP  
port. When set to “Half-Duplex”, the FlexPoint will operate  
in Half-Duplex. When set to “Full-Duplex” (factory setting),  
the FlexPoint will operate in Full-Duplex or Half-Duplex  
depending on the features supported by the other device.  
The FlexPoint100Fx/Tx converts between Fast Ethernet  
100Base-Fx fiber and 100Base-Tx twisted pair (RJ45 UTP)  
cabling. It operates in Half-Duplex (HD) or Full-Duplex (FD).  
Thefollowingmultimode(MM)andsingle-mode(SM)models  
are described here:  
Mounting and Cable Attachment:  
The FlexPoint 100Fx/Tx can be solo-mounted using a wall-  
mounting kit, or rack-mounted using a 5-position shelf,  
FlexRack 5, or a high-density FlexPoint Powered Chassis.  
Model Fiber Type  
Max Distance  
Connector  
4330 1310 nm (MM) 5 km  
4331 1310 nm (SM) 30 km  
4332 1310 nm (MM) 5 km  
4333 1310 nm (SM) 30 km  
4334 1310 nm (SM) 60 km  
4335 1310 nm (SM) 60 km  
4336 1310 nm (MM) 5 km  
4337 1310 nm (SM) 30 km  
4338 1310 nm (MM) 5 km  
4350 1550 nm (SM) 85 km  
4351 1550 nm (SM) 120 km  
4353 1310 nm (MM) 5 km  
SC  
SC  
ST  
ST  
SC  
ST  
MT-RJ  
MT-RJ  
VF-45  
SC  
Half-Duplex must be used when connecting to a hub. Full-  
Duplex can be used when connecting switches or between  
a switch and a Full-Duplex workstation.  
Attach the FlexPoint 100Fx/Tx UTP via a category 5 cable to  
a 100Base-Tx Fast Ethernet device.  
Attach the FlexPoint 100Fx/Tx fiber via cable to a 100Base-Fx  
Fast Ethernet device. The FlexPoint transmit (Tx) must  
attach to the receive side on other device; the receive (Rx)  
must attach to the transmit.  
LED Indicators:  
LED  
Color Description  
Power On  
Auto-Neg  
Yellow Power applied  
Green The UTP side switch is set to  
“Auto-Negotiation” position.  
Switch Settings:  
“RJ45 Cross-Over” Switch: When connecting the UTP to a  
huborswitch, setswitchtoStraight-Through(factory setting).  
When connecting to a workstation, set it to “Cross-Over.”  
Full-Duplex  
Green Full-Duplex selected.  
SC  
LC  
Half-Duplex Green Half-Duplex selected.  
Fiber Lk/Rx Green Solid: Link  
Flashing: Data received.  
“Auto-Negotiation/Manual” Switch: When in “Manual” ,  
the FlexPoint operation is selected by the “Full-Duplex/Half-  
Duplex” switch. When in “Auto-Negotiation(factory setting),  
the FlexPoint automatically selects Full or Half-Duplex  
operationdependingontheFull-Duplex/Half-Duplexswitch  
position and the features of the device connected to its  
For optical budget specifications, see this product’s data  
sheet.  
Fiber Error  
UTP Lk/Rx  
Red  
Green Solid: Link  
Flashing: Data received.  
Data errors detected on UTP.  
Data errors detected on fiber.  
Power Adapter Notice:  
1.When Using in a stand-alone configuration, this product  
is intended to be and must be used only with a Listed Direct  
UTP Error  
Red  
Technical Support:  
For help with this product, contact our Tech. Support:  
from the date of shipment. TO REGISTER, COMPLETE  
AND MAIL OR FAX THE REGISTRATION PORTION OF  
THIS INSTRUCTION MANUAL TO THE INDICATED  
ADDRESS. During the warranty period, Omnitron will, at  
its option, repair or replace a product which is proven to be  
defective.  
Exclusive Remedies  
The remedies provided herein are the Buyer’s sole  
and exclusive remedies. Omnitron shall not be liable  
for any direct, indirect, special, incidental, or  
consequential damages, whether based on contract,  
tort, or any legal theory.  
Phone:  
Fax:  
(949)250-6510  
(949)250-6514  
Address: Omnitron Systems Technology, Inc.  
140 Technology Drive, #500  
For warranty service, the product must be sent to an  
Omnitron designated facility, at Buyer’s expense. Omnitron  
will pay the shipping charge to return the product to Buyer’s  
designated US address using Omnitron’s standard shipping  
method.  
Irvine, CA 92618 USA  
E-mail:  
URL:  
Warning  
The operating description in this Instruction Manual is  
for use by qualified personnel only. To avoid electrical  
shock, do not perform any servicing of this unit other  
than that contained in the operating instructions, unless  
you are qualified and certified to do so by Omnitron  
Systems Technology, Inc.  
Limitation of Warranty  
The foregoing warranty shall not apply to defects  
resulting from improper or inadequate use and/or  
maintenance of the equipment by Buyer, Buyer-  
supplied equipment, Buyer-supplied interfacing,  
unauthorized modifications or tampering with  
equipment (including removal of equipment cover by  
personnel not specifically authorized and certified by  
Omnitron), or misuse, or operating outside the  
environmental specification of the product (including  
but not limited to voltage, ambient temperature,  
radiation, unusual dust, etc.), or improper site  
preparation or maintenance.  
Caution  
All user-required operations can be performed without  
opening the unit. Never attempt to open or remove the  
cover or tamper with the unit.  
Warranty  
This product is warranted to the original purchaser against  
defects in material and workmanship for a period of TWO  
YEARS from the date of shipment. A LIFETIME warranty  
may be obtained by the original purchaser by  
REGISTERING this product with Omnitron within 90 days  
No other warranty is expressed or implied. Omnitron  
specifically disclaims the implied warranties of  
merchantability and fitness for any particular purpose.  
Form: 040-04330-001E 11/07  
Download from Www.Somanuals.com. All Manuals Search And Download.  

National Instruments Barcode Reader SC 2043 SG User Manual
National Instruments Network Card FP 3000 User Manual
NEC Laptop FC N21S User Manual
NETGEAR Network Card XE102 User Manual
Network Technologies Switch RACKMUX V15 4UNV User Manual
Omega Speaker Systems Computer Hardware CIO RELAY08 User Manual
Omnimount TV Mount OM10049 User Manual
Omnimount TV Video Accessories 1002697 User Manual
One for All Universal Remote URC 7780 User Manual
Onkyo Speaker System Ls 3100 User Manual