Omega Vehicle Security Electric Heater LSC6400 User Manual

Use r s Gu id e  
Shop online at  
omega.com  
For latest product manuals:  
omegamanual.info  
LSC6 4 0 0  
M-4 3 7 5 / 1 0 0 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Unpacking Instructions  
After opening the shipping carton, remove the molded foam top  
from the carton. Remove the platform and place onto a flat,  
level and steady surface. The 100 LB and 250 LB capacity platforms  
are shipped with inserts to protect them from shock loading during  
shipment. These inserts must be removed before attempting to  
operate the platform.  
To remove the foam inserts, begin by removing the top platform  
cover. The inserts are corrugated cardboard blocks, placed between  
the upper and lower frames of the platform. Simply slide these blocks  
out and replace the platform cover.  
Leveling the LSC6400  
For best weighing results the platform should be properly leveled  
before operating. To level:  
· Remove the top platform cover to expose the level bubble  
located on the top frame.  
· Using the level bubble as a guide, adjust the four feet until  
the bubble is centered in the level.  
· When the platform is level, firmly tighten the hex jam nuts on  
the feet.  
· Replace the platform cover.  
· Any time the platform is relocated, it should be re-leveled.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Load Cell Wiring  
The LCS6400 mild steel version comes with a round, CPC style  
connector that mates with all WM7400 and WM7600 digital indicators.  
The Stainless Steel version comes with out this connector so  
that the load cell cable may be inserted through the watertight  
cable clamp used on wash down indicators.  
The color codes, functions and pin assignments are as follows:  
WIRE COLOR  
RED  
WHITE  
SHIELD  
NOT USED – KEY  
BROWN/YELLOW  
BLACK  
CPC PIN  
NUMBER  
DESCRIPTION  
1
2
3
4
5
6
7
8
+SIGNAL  
-SIGNAL  
GROUND  
NOT USED - KEY  
-SENSE  
-EXCITATION  
+SENSE  
+EXCITATION  
BLUE  
GREEN  
Calibration Instructions  
Please refer to the calibration instructions for the digital indicator  
that will be used with the base.  
Load Cell Ratings  
The LCS6400 Series Base is available in capacities of 100, 250, 500  
and 1,000 LB capacities. 100 through 500 LB capacities are rated  
at 2 mv/v and the 1,000 LB capacity is rated at 1 mv/v.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
WARRANTY/DISCLAIMER  
OMEGA ENGINEERING, INC. warrants this unit to be free of defects in materials and workmanship for a  
period of 13 months from date of purchase. OMEGA’s WARRANTY adds an additional one (1) month  
grace period to the normal one (1) year product warranty to cover handling and shipping time. This  
ensures that OMEGA’s customers receive maximum coverage on each product.  
If the unit malfunctions, it must be returned to the factory for evaluation. OMEGA’s Customer Service  
Department will issue an Authorized Return (AR) number immediately upon phone or written request.  
Upon examination by OMEGA, if the unit is found to be defective, it will be repaired or replaced at no  
charge. OMEGA’s WARRANTY does not apply to defects resulting from any action of the purchaser,  
including but not limited to mishandling, improper interfacing, operation outside of design limits,  
improper repair, or unauthorized modification. This WARRANTY is VOID if the unit shows evidence of  
having been tampered with or shows evidence of having been damaged as a result of excessive corrosion;  
or current, heat, moisture or vibration; improper specification; misapplication; misuse or other operating  
conditions outside of OMEGA’s control. Components which wear are not warranted, including but not  
limited to contact points, fuses, and triacs.  
OMEGA is pleased to offer suggestions on the use of its various products. However,  
OMEGA neither assumes responsibility for any omissions or errors nor assumes liability for any  
damages that result from the use of its products in accordance with information provided by  
OMEGA, either verbal or written. OMEGA warrants only that the parts manufactured by it will be  
as specified and free of defects. OMEGA MAKES NO OTHER WARRANTIES OR  
REPRESENTATIONS OF ANY KIND WHATSOEVER, EXPRESS OR IMPLIED, EXCEPT THAT OF TITLE,  
AND ALL IMPLIED WARRANTIES INCLUDING ANY WARRANTY OF MERCHANTABILITY AND  
FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. LIMITATION OF  
LIABILITY: The remedies of purchaser set forth herein are exclusive, and the total liability of  
OMEGA with respect to this order, whether based on contract, warranty, negligence,  
indemnification, strict liability or otherwise, shall not exceed the purchase price of the  
component upon which liability is based. In no event shall OMEGA be liable for  
consequential, incidental or special damages.  
CONDITIONS: Equipment sold by OMEGA is not intended to be used, nor shall it be used: (1) as a “Basic  
Component” under 10 CFR 21 (NRC), used in or with any nuclear installation or activity; or (2) in medical  
applications or used on humans. Should any Product(s) be used in or with any nuclear installation or  
activity, medical application, used on humans, or misused in any way, OMEGA assumes no responsibility  
as set forth in our basic WARRANTY/DISCLAIMER language, and, additionally, purchaser will indemnify  
OMEGA and hold OMEGA harmless from any liability or damage whatsoever arising out of the use of the  
Product(s) in such a manner.  
RETURN REQUESTS/INQUIRIES  
Direct all warranty and repair requests/inquiries to the OMEGA Customer Service Department. BEFORE  
RETURNING ANY PRODUCT(S) TO OMEGA, PURCHASER MUST OBTAIN AN AUTHORIZED RETURN  
(AR) NUMBER FROM OMEGAS CUSTOMER SERVICE DEPARTMENT (IN ORDER TO AVOID  
PROCESSING DELAYS). The assigned AR number should then be marked on the outside of the return  
package and on any correspondence.  
The purchaser is responsible for shipping charges, freight, insurance and proper packaging to prevent  
breakage in transit.  
FOR WARRANTY RETURNS, please have the  
following information available BEFORE  
contacting OMEGA:  
FOR NON-WARRANTY REPAIRS, consult OMEGA  
for current repair charges. Have the following  
information available BEFORE contacting OMEGA:  
1. Purchase Order number under which the product  
was PURCHASED,  
1. Purchase Order number to cover the COST  
of the repair,  
2. Model and serial number of the product under  
warranty, and  
3. Repair instructions and/or specific problems  
relative to the product.  
2. Model and serial number of the product, and  
3. Repair instructions and/or specific problems  
relative to the product.  
OMEGA’s policy is to make running changes, not model changes, whenever an improvement is possible. This affords  
our customers the latest in technology and engineering.  
OMEGA is a registered trademark of OMEGA ENGINEERING, INC.  
© Copyright 2004 OMEGA ENGINEERING, INC. All rights reserved. This document may not be copied, photocopied,  
reproduced, translated, or reduced to any electronic medium or machine-readable form, in whole or in part, without the  
prior written consent of OMEGA ENGINEERING, INC.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Where Do I Find Everything I Need for  
Process Mea surem ent a nd Control?  
OMEGA…Of Course!  
TEMPERATURE  
ߜ
 
ߜ
 
ߜ
 
ߜ
 
ߜ
 
Thermocouple, RTD & Thermistor Probes, Connectors, Panels & Assemblies  
Wire: Thermocouple, RTD & Thermistor  
Calibrators & Ice Point References  
Recorders, Controllers & Process Monitors  
Infrared Pyrometers  
PRESSURE, STRAIN AND FO RCE  
ߜ
 
ߜ
 
ߜ
 
ߜ
 
Transducers & Strain Gages  
Load Cells & Pressure Gages  
Displacement Transducers  
Instrumentation & Accessories  
FLO W / LEVEL  
ߜ
 
ߜ
 
ߜ
 
ߜ
 
Rotameters, Gas Mass Flowmeters & Flow Computers  
Air Velocity Indicators  
Turbine/ Paddlewheel Systems  
Totalizers & Batch Controllers  
p H/ CO NDUCTIVITY  
ߜ
 
ߜ
 
ߜ
 
ߜ
 
pH Electrodes, Testers & Accessories  
Benchtop/ Laboratory Meters  
Controllers, Calibrators, Simulators & Pumps  
Industrial pH & Conductivity Equipment  
DATA ACQ UISITIO N  
ߜ
 
ߜ
 
ߜ
 
ߜ
 
ߜ
 
Data Acquisition & Engineering Software  
Communications-Based Acquisition Systems  
Plug-in Cards for Apple, IBM & Compatibles  
Datalogging Systems  
Recorders, Printers & Plotters  
HEATERS  
ߜ
 
ߜ
 
ߜ
 
ߜ
 
ߜ
 
Heating Cable  
Cartridge & Strip Heaters  
Immersion & Band Heaters  
Flexible Heaters  
Laboratory Heaters  
ENVIRO NMENTAL  
MO NITO RING AND CO NTRO L  
ߜ
 
ߜ
 
ߜ
 
ߜ
 
ߜ
 
ߜ
 
Metering & Control Instrumentation  
Refractometers  
Pumps & Tubing  
Air, Soil & Water Monitors  
Industrial Water & Wastewater Treatment  
pH, Conductivity & Dissolved Oxygen Instruments  
M-4375/ 1006  
Download from Www.Somanuals.com. All Manuals Search And Download.  

MPC Clock OM 20000072 User Manual
NETGEAR Switch GS105PE User Manual
Nikon Camera Lens 185mm f 18 User Manual
NordicTrack Exercise Bike NTEL75060 User Manual
Nostalgia Electrics Frozen Dessert Maker RSM 602 User Manual
Numark Industries Turntable PRO TT 2 User Manual
Omron Stereo Amplifier V600 HA User Manual
One for All Universal Remote OARI06G User Manual
Oregon Scientific Thermometer EMR201 User Manual
Panasonic Camera Accessories HHR150AA User Manual