User’s Guide
Shop online at
omega.com
e-mail: [email protected]
For latest product manuals:
omegamanual.info
MADE IN TAIWAN
HHB400
Wireless Video Inspection System
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
Welcome. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2, 3
Battery Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Product Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Tool Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Description for Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Operation Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Connecting the Display Unit to the Camera . . . . . . . . . 7
Head and Probe . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Accessories Installation . . . . . . . . . . . . . . . . . . . . . . 7
Connect the Grip Handle to the Monitor . . . . . . . . . 7
Install Micro SD Card . . . . . . . . . . . . . . . . . . . . . . . . 8
U-disk Function- attache to computer . . . . . . . . . . . 8
Video Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
How to Work. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
How to operate the grip . . . . . . . . . . . . . . . . . . . . . . . 8
How to view the screen. . . . . . . . . . . . . . . . . . . . . . . . 9
How to set the screen Menu. . . . . . . . . . . . . . . . . . . . 9
Description for Keys . . . . . . . . . . . . . . . . . . . . . . 10, 11
Operation Precautions . . . . . . . . . . . . . . . . . . . . . . . . 11, 12
Trouble Shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
FCC Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15, 16
i
Download from Www.Somanuals.com. All Manuals Search And Download.
WELCOME
Thank you for purchasing a HHB400 Wireless Data logging
Manual
Video Inspection Camera Scope. Please read this User’s
carefully before using this product.
The product is designed as a remote inspection device. It can be
used to look into tight or inaccessible areas and wirelessly trans-
mit real time video or still images for monitoring or recording.
Typical applications may include HVAC inspection, automotive
inspection, cable routing, automotive/boat/aircraft inspection,
etc.
OVERVIEW
The HHB400 Wireless Video Inspection System
HHB400 Camera Scope with removable display comes with,
12mm Diameter, 3.28 ft. (1m) Obedient Probe, 2GB Micro SD card,
3 Extension Tools: (Mirror, Magnet, Pick-Up Hook), USB and Video
interconnect Cables, Li-ion rechargeable batteries with Charger,
Hard Blow Mold Case and Instruction Manual. It is suitable for
HVAC/R, plumbing and general inspection
The system has a high clarity color LCD of 3.5" in size. The camera
head and adjustable LED lights are imbedded in the probe tip.
Three accessories can be attached to the probe tip for various
applications: the magnetic tip is used to pick up small metal
objects; the mirror tip is used to view 90° angle; the hook is used
to grab onto objects.
HHB400 Series’ wireless function allows user to detach the LCD
from the handle and view findings remotely up to 32 ft away. The
system operates on a built-in rechargeable lithium polymer battery.
It interfaces with external displays such as computer, TV and LCD
panel via USB, SD card and AV cable.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
• 12mm diameter probe, 3.28 ft. (1m) long, flexible obedient and
waterproof to IP67 standards
• Optional probe extensions are available to extend probe length up
to 16 ft. (5m)
• 3.5 in. (88.9mm) (Screen Diagonal) TFT-LCD Wireless Color Moni-
tor can be detached from the unit for remote viewing up to 32 ft.
(10m) away
• Both monitor and handle use Li-ion rechargeable batteries.
System comes complete with batteries and charger.
• Two LED lights inside the tip of the probe illuminate dark spaces
for clear inspection
• Built-in magnets on back of monitor facilitate hands-free operation
• View results in real time or data log and record in still photo
(JPEG) or (AVI) video
• NTSC or PAL compatible USB and AV Out interfaces
• Three languages menu includes English, Spanish and French
• (x3.2) zoom feature
• 180° image rotation feature on still images
SAFETY INSTRUCTIONS
Failure to follow the instructions listed below may result in electric
shock or personal injury.
• Read and understand all instructions prior to any operation.
• Do not remove any labels from the product.
• Work in a well lit area as dark areas may cause accidents.
• Do not operate the product in the presence of flammable/
explosive gases.
• Do not use the product around corrosive chemicals which can
damage sensitive tips.
• Keep bystanders, children and visitors away while operating the
product.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
• Stay alert, watch what you are doing and use common sense. A
moment of interruption can result in serious personal injury.
• Do not over-reach. Keep proper footing and balance at all times.
• Always wear eye protective gear. Dust mask, non-skid safety
shoes, hard hat or hearing protection must be used for appropri-
ate conditions.
• Do not place the product on any unstable cart or surface. The
product may fall causing serious injury to a person or serious
damage to the product.
• Never spill liquid of any kind on the video display units. Liquid in-
creases the risk of electrical shock and damage to the product.
• Do not use the device for personal or medical use.
• The units are not shock-resistant. Do not drop it.
BATTERY PRECAUTIONS
• Please use the enclosed factory power adapter, otherwise you
may damage the instrument.
• Completely exhaust the power for the first time. We recommend
full charging and full discharging for the first few times. The
charging time should not be less than 12 hours for the first few
usages. A fully activated battery will offer maximum capacity of
the built-in batteries.
• The charging and discharging time differs based on the current
consumption of the units’ components.
• Always keep the charging connector away from the metal and
oily objects.
• Fully charge the battery to make sure it has high performance.
• Don’t compress and puncture the battery inside.
•
“Li-ion” Rechargeable battery inside! Please do not open battery
compartment in the handle unless battery replacement is necessary.
• Don’t throw the product into fire, this may cause an explosion.
• Dispose the battery properly. High temperature will cause the
battery to explode. Some countries have regulations concerning
battery disposal.
Please follow all applicable regulations.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
PRODUCT COMPONENTS
Fig. 1
Fig. 3
10
11
Fig. 4
1．Camera head and Probe
2．The grip
3．LCD Screen
4．Magnetic tip
5．Hook tip
6．Mirror tip
7．DC adapter
8．One-into-two cable
9．Micro SD memory card
10．TV cable
11．USB cable
4
Download from Www.Somanuals.com. All Manuals Search And Download.
TOOL COMPONENTS
Grip Handle
A．Camera protection cover
(Remove cover before use)
B．Camera head
C．Probe
D．Probe connector
E．Power indicator——Green
lights means normal power;
Red light means low battery.
F．Switch / Wheel button to
Fig. 5
adjust the LED brightness
G．Charging light indicator
H．Charging interface
Monitor
I．
J．Locking buckle clip
K．Signal connector slot
L．Charging light indicator
M．Charging interface
N．Micro SD socket
O．USB interface
P．Video Out
Q．
Fig. 6
R．
S．
T．
U．
V．LCD screen
W．Base stand
5
Download from Www.Somanuals.com. All Manuals Search And Download.
DESCRIPTION FOR KEYS
Keys
View mode
Playback mode
Menu set
Switch into playback
mode; Hold for 3s to
turn off the unit.
Switch into view
mode; Hold for 3s
to turn off the unit.
Hold for 3s to turn
off the unit.
Switch into menu set.
Switch into current
file operation, delete date and time
single all format the
Set functions set
memory card, etc.
Take a photo
Take a video
Image rotation
Show the last photo Moving to left;
or video;
Show the next photo Moving to right
or video;
Play pause, resume
the video file;
Moving up / pro-
gressive increase
data and time;
Image magnify
Stop video file;
View six files or six
folders.
Moving down /
progressive
decrease data
and time;
OPERATION INSTRUCTIONS
• Battery Charging
1. Connect the DC cable to the grip and/or screen.
2. Plug the AC plugs to household power outlet.
3. The LED G and/or L turns red means charging.
4. The LED G and/or L turns green, means fully charged
5. Pull out the AC plug of adapter.
Notes: If you want to charge both the grip and screen, use the one-
to-two cable. The single end goes to the adapter, and the
double end goes to screen and grip.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTING THE DISPLAY UNIT
TO THE CAMERA
HEAD AND PROBE:
The display unit must be connected to
the camera head and probe. To connect
the probe to the display unit, make sure
the keyed ends are properly aligned
(See Fig. 7). Once they are aligned,
tighten the nut.
ACCESSORIES INSTALLATION:
The three accessories include mirror tip,
hook tip and magnetic tip (See Fig. 2). All
are attached to the camera head the same
way. Hold the camera head as shown in
Fig. 8, slip the semicircle end of the
accessory over the flats of the camera
head then rotate the accessory 90° to
fix it in place as shown in Fig. 9.
• Connect the grip handle to Monitor
The product can work with the grip detached
from screen and the grip attached with
screen; Slide the slot at the back screen into
the slot of grip in the left direction until you
hear the locking sound, which means con-
nection is accomplished. Press the lock
buckle clip and slide to the right direction to
detach the screen (FIG.10).
Note: The wireless function is off while the
product is attached to the screen on the grip, which will en-
sure that the image quality does not suffer from outside inter-
ference.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
• Install Micro SD card
When the SD card is inserted correctly,
icon will show on the
screen; Otherwise
icon will show.
• U-disk function- attach to computer
The USB interface on the screen can be connected to a computer.
When inserting the memory card, it can be considered as a U-disk;
When connecting the USB2.0 cable to computer and turning the
power on, the LCD displays “MSDC” , now the screen can be used
as U-disk.
• Video output
If you want to view image from television, please connect the VIDEO
OUT of screen to VIDEO IN of television by video out cable, now the
screen is off.
• How to work
1. How to operate the grip:
a. Roll the button on the grip towards the probe direction to
power on.
b. Continue to roll the button to adjust the brightness of the
camera LEDS (FIG.11).
8
Download from Www.Somanuals.com. All Manuals Search And Download.
2. How to view the screen
a. Insert the Micro SD to memory card slot correctly.
b. Press
to enter view mode, the screen automatically find
the image signal. When the same receiving and transmission
frequency occurs, it is time to view image.（The default chan-
nel is CH1：2414MHZ）。
c. Press
to take a photo (but if no card is inserted, the key
will not function), the files will be stored in memory card itself.
d. Press
to start record image (but if no card is inserted, the
key will not function), red icon will show on the up edge of the
screen, the files with be stored in memory card itself.
e. Press
to rotate image, every press rotates 180°.
to zoom from 1 to 3.2 times with corresponding
f. Press
numbers indicating zoom size.
g. Press
h. Press
i. Hold
to enter menu set.
to enter playback mode.
for 3s to turn off the product.
Note: The screen turns off itself if not in use for 3 minutes.
Tips: When the system is working (especially in video mode),
ejecting SD card will damage the stored files or damage
SD card, please make sure the system is off before removing
SD card.
3. How to set screen Menu
a. In View status, press MENU to set menu.
b. Select the menu by pressing the four direction keys.
c. Press MENU to confirm the selection.
d. Press EXIT back to the last menu until you are View mode.
e. The following table shows screen setting menu.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
DESCRIPTION FOR KEYS
Function Menu Selection
Menu
Selection Parameter
Tuner Channel
Photo Quality
CH1; CH2; CH3; CH4; EXIT
High Quality; Standard Quality; Low Quality; EXIT
QVGA; D1; EXIT
Movie Quality
Advanced
TV Output Standard
Setting
NTSC; PAL; EXIT
EXIT
Auto Capture
ON; OFF; EXIT
Master Capture
File OverWrite Setting
EXIT
Photo 1; Photo 3; Movie 5s; Movie 10s; EXIT
ON; OFF; EXIT
Auto
Capture
Set Time/Date
Photo TimeStamp
Movie TimeStamp
Resume to factory
default
YY/MM/DD
On; Off; EXIT
On; Off; EXIT
Yes; No
Set Time/
Date
EXIT
4. How to operate Playback mode (No selection is available if there
is no memory card.)
a. Press
to display stored six images, press again to display
different folders.
b. Press
to scan files or folders.
c. Press
or
to view the last or next image.
to play video, press again to pause.
Pressing once more will resume video. Press to stop playing.
e. Press to play files, press direction keys to select delete
single all files or format the memory card.
f. Select EXIT to return to last menu until playback mode.
g. Press to return to view mode.
d. If it is video file, press
10
Download from Www.Somanuals.com. All Manuals Search And Download.
5. This product is designed for inspection of hard-to reach areas.
Typical applications include HVAC inspection, car inspection,
circuitry, vessel and aircraft.
OPERATION PRECAUTIONS!
1. Please read all the safety instructions carefully.
2. The probe is flexible to help you operate in hard-to-reach areas.
Please don’t insert or bend by force. Please do not over bend any
part of the probe. Normally, the bending radius should not be less
than 2" (50mm) to prevent from permanent damage to the probe.
3. Don’t use the probe or camera head to modify surroundings,
clear pathways or clogged areas.
4. The hand-held display unit is not waterproof. The camera head
and its cover are waterproof, but not acid-proof or fire-proof. Do
not touch these materials or they will ruin the camera head’s pro-
tective plastic. Avoid submersing the camera head into corrosive,
oily places or high temperature objects.
5. Don’t place the cameral head or probe into anything or anywhere
that may contain a live electrical charge.
Please check following methods to avoid injury.
For walls: For inspecting the inside of walls, be sure to shut off the
circuit breaker to the whole house before
using the tool.
For pipes: If you suspect a metal pipe could contain an electrical
charge, have a qualified electrician check the pipe before using this
product. A ground circuit, in some cases, can be returned to the
cast aluminum pipes and cause them to be charged.
For automobiles: Be sure the automobile is not running during
inspection. Metal and liquid under the hood may
be hot. Don’t get oil or gas on the camera head.
• Please do not operate this product unless the manual has been
read thoroughly and proper training has been completed.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
• The red LED will light when the handle has a low battery;
The “
” will show up on the screen if the monitor has a low
battery.
• Do not immerse the handheld display unit in water which will re-
sult in electric shock and damages.
• The camera head is water-proof, but the handheld display is not
water-proof.
• Do not use the product if condensation forms inside the camera
head.
• If the tool does not work well after turning it on. Please take the
batteries out and do not use. Please have the unit checked by a
qualified technician.
• Store idle products out of reach of children and other untrained
personnel. The product is dangerous in the hands of untrained
users.
• Maintain the inspection product with care. If the product is
dropped, check for the breakage which may affect its operation. If
it is damaged, have the product serviced before using. Many acci-
dents are caused by poorly maintained products.
• Use only accessories that are recommended by the manufacturer
for your product. Accessories are suitable for the product, but
may become hazardous when used on another product.
• Should the unit freeze up, press reset button or power off to reset.
• Dry your hands before turning the tool ON or OFF.
• Protect against excessive heat. The product should be kept away
from heat sources, such as radiators heat registers stoves or other
products (including amplifiers) that produce heat. Don’t use the
tool near moving machinery or areas where the temperature ex-
ceeds 113F (45C).
• Please cover the camera tip with protective cap while not in use.
• Store the product in ventilated and dry places.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLE SHOOTING
Problems
Causes
Solutions
Adapter didn’t make a
good connection with
product.
The connector or cable
is broken.
Please check and try again.
Will not
charge
Replace and try again.
Dead battery
Ask a technician to replace the battery.
Set the same channel.
1. Different channel
set between the grip
and screen.
The screen is
on but without
image or shows
“No Signal”
2. The probe is loose. Check and connect again.
3. Stains on the cam- Check if stains exist.
era head.
LEDs on the
camera head
are dim at max
brightness, dis-
play changes
from black to
white, color
Low battery
Use adapter for charging.
display turns
itself off after
a period.
The circuit is in
protection status.
Press reset or use adapter for charging
to release.
The product
won’t turn on.
Low battery
Dead battery
Use adapter for charging
Ask a technician to replace the battery.
Interference to the
screen or voltage
fluctuation.
Please use the reset button
inside the hole below the
stand base.
Abnormal
display or
invalid keys.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
FCC INFORMATION
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference. (2) this device must accept any interfer-
ence received, including interference that may cause undesired op-
eration. Changes or modifications not expressly approved by the
party responsible for compliance could void the user’ s authority to
operate the equipment.
CAUTIONS!
• The apparatus shall not be exposed to dripping or splashing and
that no objects filled with liquids, such as vases, shall be placed
on the apparatus. Do not expose instrument to moisture.
• Don’t drop the instrument or use by force.
• Don’t disassemble the instrument to avoid failure.
• Please do not open battery compartment in the handle unless
battery replacement is necessary.
• Don’t place the instrument with corrosive gas or objects.
• Don’t expose the instrument in environment which is with shock,
too high or too low temperatures.
• Store the instrument in a safe area.
• Don’t immerse the instrument into water which can cause dam-
ages to the product.
• Turn off the Camera/Monitor if the system is not in use.
• The adapter is used as the disconnect device from the mains.
The adapter shall remain readily operable.
• The Camera/Monitor can only be completely disconnected from
the mains by unplugging the adapter.
• Do not cut the DC power cable of the apparatus to fit with another
power source.
• Attention should be paid to the disposal of batteries in environ-
mentally- friendly ways.
• Charge the batteries every three months if not being used for a
long period of time
14
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS:
CAMERA HANDLE/PROBE
Transmission Range: Up to 32 ft. (10m), clear range without obstacle
Transmission Frequency: 2414Mhz,
Resolution: 320 x 240 Pixels
Lighting Source: White LED
Focal Length: 1.97 in (50mm)
Field of View: 60°
Depth of Field (DOF): 1.2" – 3.94" (30mm – 100mm)
Camera Tipped Probe: 0.47" (12mm) Diameter Standard
Probe Length: 3.28 ft. (1m) Standard
Water proof capacity: IP67, only for obedient probe and camera
head
Power Source: 3.7 V “Li-ion” rechargeable battery pack (included);
DC5.5V
Power Adapter: Input: AC 100 – 240 V, 50 – 60 Hz; Output: 5.5V, 1.5A
Dimensions: 8.5" x 6.9" x 1.9" (215 x 175 x 50mm)
Weight: 8 oz. (228g)
PROBE OPTIONS:
• 3.28 ft. (1m) and 6.56 ft. (2m) long 12mm Diameter Probe
Extensions -Total Length: Up to 16 ft. (5m)
• 3.28 ft. (1m) long 9.0mm Diameter Camera Tipped Probe
MONITOR
Display: 3.5 in. (88.9mm) (Screen Diagonal) Color TFT LCD Screen
Receiving Frequency: 4 channels, 2414MHz, 2432MHz, 2450MHz,
2468MHz
Resolution: 320 x 240 Pixels
Power Source: 3.7 V “Li-ion” rechargeable battery pack (included);
DC5.5V
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Power Adapter: Input: AC 100 – 240 V, 50 – 60 Hz; Output: 5.5V 1.5A
Image Resolution: 320 x 240 Pixels
Video Resolution: QVGA/D1
Image storage media: Micro SD card（Up to 16G）
Dimensions: 3.9 x 3.2 x 1 in. (100 x 82 x 26mm)
Weight: 6.2 oz. (175g)
Operating Temperature: 32 to 113°F (0 to 45°C)
5 to 95%RH non-condensing
Storage Temperature: (-20 to 60°C) <85%RH
Adapter: Input-100 to 240VAC Output: 5.5V 1.5A
Charging Time: About 3.5 Hours
Battery Life: About 2 Hours
EU Environmental Protection Waste electrical products should not
be disposed of with household waste.
Please recycle where facilities exist.
Check with your Local Authority or retailer for recycling advice.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES:
17
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES:
18
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES:
19
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY/ DISCLAIMER
OMEGA ENGINEERING, INC. warrants this unit to be free of defects in materials and workmanship for a
period of 13 months from date of purchase. OMEGA’s Warranty adds an additional one (1) month grace
period to the normal one (1) year product warranty to cover handling and shipping time. This
ensures that OMEGA’s customers receive maximum coverage on each product.
If the unit malfunctions, it must be returned to the factory for evaluation. OMEGA’s Customer Service
Department will issue an Authorized Return (AR) number immediately upon phone or written request.
Upon examination by OMEGA, if the unit is found to be defective, it will be repaired or replaced at no
charge. OMEGA’s WARRANTY does not apply to defects resulting from any action of the purchaser,
including but not limited to mishandling, improper interfacing, operation outside of design limits,
improper repair, or unauthorized modification. This WARRANTY is VOID if the unit shows evidence of
having been tampered with or shows evidence of having been damaged as a result of excessive corro-
sion; or current, heat, moisture or vibration; improper specification; misapplication; misuse or other
operating conditions outside of OMEGA’s control. Components in which wear is not warranted, include
but are not limited to contact points, fuses, and triacs.
OMEGA is pleased to offer suggestions on the use of its various products. However, OMEGA
neither assumes responsibility for any omissions or errors nor assumes liability for any
damages that result from the use of its products in accordance with information provided by
OMEGA, either verbal or written. OMEGA warrants only that the parts manufactured by the
company will be as specified and free of defects. OMEGA MAKES NO OTHER WARRANTIES
OR REPRESENTATIONS OF ANY KIND WHATSOEVER, EXPRESSED OR IMPLIED, EXCEPT
THAT OF TITLE, AND ALL IMPLIED WARRANTIES INCLUDING ANY WARRANTY OF
MERCHANTABILITY AND FITNESS FOR
A
PARTICULAR PURPOSE ARE HEREBY
DISCLAIMED. LIMITATION OF LIABILITY: The remedies of purchaser set forth herein are
exclusive, and the total liability of OMEGA with respect to this order, whether based on
contract, warranty, negligence, indemnification, strict liability or otherwise, shall not
exceed the purchase price of the component upon which liability is based. In no event shall
OMEGA be liable for consequential, incidental or special damages.
CONDITIONS: Equipment sold by OMEGA is not intended to be used, nor shall it be used: (1) as a “Basic
Component” under 10 CFR 21 (NRC), used in or with any nuclear installation or activity; or (2) in medical
applications or used on humans. Should any Product(s) be used in or with any nuclear installation or
activity, medical application, used on humans, or misused in any way, OMEGA assumes no
responsibility as set forth in our basic WARRANTY/ DISCLAIMER language, and, additionally, purchaser
will indemnify OMEGA and hold OMEGA harmless from any liability or damage whatsoever arising out
of the use of the Product(s) in such a manner.
RETURN REQUESTS/ INQUIRIES
Direct all warranty and repair requests/inquiries to the OMEGA Customer Service Department. BEFORE
RETURNING ANY PRODUCT(S) TO OMEGA, PURCHASER MUST OBTAIN AN AUTHORIZED RETURN
(AR) NUMBER FROM OMEGA’S CUSTOMER SERVICE DEPARTMENT (IN ORDER TO AVOID PROCESS-
ING DELAYS). The assigned AR number should then be marked on the outside of the return package and
on any correspondence. The purchaser is responsible for shipping charges, freight, insurance and proper pack-
aging to prevent breakage in transit.
FOR NON-WARRANTY REPAIRS, consult OMEGA
for current repair charges. Have the following
information available BEFORE contacting OMEGA:
1. Purchase Order number to cover the COST
of the repair,
2. Model and serial number of the product, and
3. Repair instructions and/or specific problems
relative to the product.
FOR WARRANTY RETURNS, please have the
following information available BEFORE contacting
OMEGA:
1. Purchase Order number under which the
product was PURCHASED,
2. Model and serial number of the product under
warranty, and
3. Repair instructions and/or specific problems
relative to the product.
OMEGA’s policy is to make running changes, not model changes, whenever an improvement is possible. This affords our cus-
tomers the latest in technology and engineering.
OMEGA is a registered trademark of OMEGA ENGINEERING, INC.
© Copyright 2010 OMEGA ENGINEERING, INC. All rights reserved. This document may not be copied, photocopied, reproduced,
translated, or reduced to any electronic medium or machine-readable form, in whole or in part, without the prior written consent of
OMEGA ENGINEERING, INC.
Download from Www.Somanuals.com. All Manuals Search And Download.
Where Do I Find Everything I Need for
Process Measurement and Control?
OMEGA…Of Course!
Shop online at omega.comsm
TEMPERATURE
DATA ACQUISITION
Ⅺ
ߜ Ⅺ
ߜ Ⅺ
ߜ Ⅺ
ߜ Thermocouple, RTD & Thermistor
Probes, Connectors, Panels &
Assemblies
Wire: Thermocouple, RTD & Thermistor
Calibrators & Ice Point References
Recorders, Controllers & Process
Monitors
Data Acquisition & Engineering
Software
Communications-Based Acquisition
Systems
Ⅺ
ߜ Ⅺ
ߜ Ⅺ
ߜ Plug-in Cards for Apple, IBM &
Compatibles
Ⅺ
ߜ Ⅺ
ߜ Data Logging Systems
Recorders, Printers & Plotters
Ⅺ
ߜ Infrared Pyrometers
PRESSURE, STRAIN AND FORCE
HEATERS
Ⅺ
ߜ Ⅺ
ߜ Ⅺ
ߜ Ⅺ
ߜ Ⅺ
ߜ Ⅺ
ߜ Ⅺ
ߜ Ⅺ
ߜ Ⅺ
ߜ Transducers & Strain Gages
Load Cells & Pressure Gages
Displacement Transducers
Instrumentation & Accessories
Heating Cable
Cartridge & Strip Heaters
Immersion & Band Heaters
Flexible Heaters
Laboratory Heaters
FLOW/LEVEL
Ⅺ
ߜ Rotameters, Gas Mass Flowmeters &
Flow Computers
ENVIRONMENTAL
MONITORING AND CONTROL
Ⅺ
ߜ Ⅺ
ߜ Ⅺ
ߜ Air Velocity Indicators
Ⅺ
ߜ Ⅺ
ߜ Ⅺ
ߜ Ⅺ
ߜ Ⅺ
ߜ Metering & Control Instrumentation
Refractometers
Turbine/Paddlewheel Systems
Totalizers & Batch Controllers
Pumps & Tubing
Air, Soil & Water Monitors
Industrial Water & Wastewater
Treatment
pH, Conductivity & Dissolved Oxygen
Instruments
pH/CONDUCTIVITY
Ⅺ
ߜ Ⅺ
ߜ Ⅺ
ߜ pH Electrodes, Testers & Accessories
Benchtop/Laboratory Meters
Controllers, Calibrators, Simulators &
Pumps
Industrial pH & Conductivity
Equipment
Ⅺ
ߜ Ⅺ
ߜ M4842/0810
Download from Www.Somanuals.com. All Manuals Search And Download.
|