Data Projector
-
VP 1
User’s Manual
U
O
T
N
E
K
U
I C
A
M
U
Q
S O U R C E
U
N
R
E
E
M
W
O
P
P O W E R
S T A T U S
L
O
V
N
T
S
R
K
V
M
O
Z O
E
T
C A N C E L
N
E
H K S T N
O
T
U
A
r
C
b
C
T
E N U
C
M
r
E
P
P
b
S
A
P
O
E
I D
I P
- V
P
K
S
I C
B
U
Q
G
F
F
R
O
O
E
T
I
U
V
M
L
R
I T
I
E
W
D
O
E
P
Z
E
E
R
F
N
O
IMPORTANT
Digital Light Processing, DLP™, Digital Micromirror Device and DMD are all trademarks of Texas
Instruments.
IBM,VGA,XGA are trademarks and registered trademarks of International Business Machines Cor-
poration.
SVGA is a registered trademark of Video Electronics Standards Association.
TMDS is a trademark of Silicon Image Inc.
Macintosh is a trademark of Apple Computer Inc.
Other names of companies and products mentioned are trademarks and registered trademarks of the
respective companies. ™, ® and © marks are not used in this document.
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INFORMATION
Important Safeguards
These safety instructions are to ensure the long life of the unit and to prevent fire and shock.
Please read them carefully and pay attention to all warnings.
Installation
•
•
•
•
•
•
For best results, use the unit in a darkened room.
Place the unit on a flat, level surface in a dry area away from dust and moisture.
Do not place the unit in direct sunlight, near heaters or heat radiating appliances.
Exposure to direct sunlight, smoke or steam can harm internal components.
Handle the unit carefully. Dropping or jarring can damage internal components.
Do not place heavy objects on top of the unit.
Power Supply
•
The unit is designed to operate on a power supply of 100 - 240 V 50/60 Hz AC. Ensure
that your power supply fits these requirements before attempting to use the unit.
The socket-outlet shall be installed near the unit and shall be accessible.
Handle the power cable carefully and avoid excessive bending. A damaged cable can
cause electric shock or fire.
•
•
•
Disconnect the power cable (mains lead) from the power outlet after using the unit.
Before disconnecting the power cable, make sure that the POWER indicator lights in
amber (not blinking or in green).
Cleaning
•
•
Disconnect the power cable from the unit.
Clean the cabinet of the unit periodically with a damp cloth. If heavily soiled, use a mild
detergent. Never use strong detergents or solvents such as alcohol or thinner.
Use a blower or lens paper to clean the lens, and be careful not to scratch or damage the
lens.
Clean the ventilation slots and speaker grills on the unit periodically using a vacuum
cleaner. If accumulated dust blocks the ventilation slots, the unit will overheat, which may
cause the unit to malfunction.
•
•
Use a soft brush attachment when using the vacuum cleaner. Do not use a hard attach-
ment, such as a crevice tool, to prevent the damage to the unit.
Lamp Replacement
•
Be sure to replace the lamp when the Status indicator comes on. If you continue to use
the lamp after 1100 hours of usage, the lamp will turn off.
Download from Www.Somanuals.cEom-3. All Manuals Search And Download.
IMPORTANT SAFETY INFORMATION
Fire and Shock Precautions
•
Ensure that there is sufficient ventilation and that vents are unobstructed to prevent the
buildup of heat inside the unit. Allow at least 10 cm (3 inches) of space between the unit
and walls.
•
Prevent foreign objects such as paper clips and bits of paper from falling into the unit. Do
not attempt to retrieve any objects that fell into the unit. Do not insert any metal objects
such as a wire or screwdriver into the unit. If something should fall into the unit, immedi-
ately disconnect the power cable from the unit and have the object removed by a quali-
fied Olympus Digital Technical Support.
•
Do not place any liquids on top of the unit.
Warnings
•
Do not look into the lens while the unit is on. Serious damage to your eyes could
result.
•
Keep any items such as magnifying glass out of the light path of the projector.The
light being projected from the lens is extensive, therefore any kind of abnormal
objects that can redirect light coming out of the lens, can cause unpredictable
outcome such as fire or injury to the eyes.
•
Do not cover the lens with the supplied lens cap or equivalent while the projector
is on. Doing so can lead to melting of the cap and possibly burning your hands due
to the heat emitted from the light output.
Download from Www.Somanuals.cEom-4. All Manuals Search And Download.
Major Features
Book-sized, lightweight (at about 1.1 kg/2.4 lbs) and small high-inten-
sity mobile projector
DMD and the synergistic effects of our own optical design serve to improve the optical utilization
efficiency.The three light sources (RGB) required in color expression are reproduced with one DMD.
These factors have enabled a design that offers both high intensity and small size/lightweight fea-
tures.
Sharp, clear picture
The absence of RGB color infidelity and the inconspicuous gaps between the individual pixels permit
the display of small characters and diagrams with distinct clarity. An up-close look reveals the differ-
ence even more.
High contrast ration of 2000:1
Use of a new generation of DMD devices has given birth to an amazing 2000:1 high contrast ratio.
By widening the difference of brightness between black and white, you can see a degree of sharp-
ness that is greater than just the brightness based on specifications.
Beautiful reproduction of high-quality images from DVD
Faithful reproduction of color tones gives rise to the display of natural images. High-quality images
such as those from DVD and other sources bring out the display capabilities that are an essential
strength of the digital projector.
Heightened effectiveness with picture in picture
The video image is projected as a sub-picture within the personal computer picture.This expands the
usefulness of the projector even more.
Digital technology corrects the horizontal and vertical keystone dis-
tortion of the projected picture
New technology is used to correct the horizontal keystone distortion in addition to the regular key-
stone correction.This permits even simpler setup adjustments.
Connection permitted for personal computers equipped with DVI con-
nectors
Inclusion of a DVI connector allows the input of analog RGB signals as well as digital RGB signals.
(The supplied conversion cable supports personal computers having a regular analog RGB connec-
Download from Www.Somanuals.cEom-5. All Manuals Search And Download.
Table of Contents
Preparation and Background Knowledge
Table of Contents............................................................................................................. E-6
Preparing the Remote Control...................................................................................... E-13
Setup and Projection
Connecting Personal Computers and Video Equipment ........................................... E-18
Personal Computers with a DVI Connector......................................................... E-18
Connections with Video Connectors ......................................................................... E-21
Video Equipment with S-VIDEO Connectors ...................................................... E-21
Operating................................................................................................................... E-24
Adjustment of the Projection Screen........................................................................... E-26
Focus Adjustment...................................................................................................... E-27
General Operations
Projecting a Picture in Picture ................................................................................... E-31
Suspending Video and Audio Temporarily ................................................................. E-31
Adjustment of the Volume.......................................................................................... E-36
Menu Operations
Menu Operation Method................................................................................................ E-37
Names and Functions of the Remote Control Buttons that Operate Via a Menu E-37
Download from Www.Somanuals.cEom-6. All Manuals Search And Download.
Table of Contents
Adjustments and Settings
Color ............................................................................................................................... E-49
Color Temp. ............................................................................................................... E-49
White ......................................................................................................................... E-50
Color Space .............................................................................................................. E-50
View................................................................................................................................. E-51
Keystone.................................................................................................................... E-53
Setup ............................................................................................................................... E-55
Auto Source............................................................................................................... E-55
Menu Position ............................................................................................................ E-57
Background ............................................................................................................... E-57
Info. ................................................................................................................................. E-59
Lamp Timer Reset ..................................................................................................... E-59
Miscellaneous
Troubleshooting ............................................................................................................. E-63
User’s Manual Links
This User’s Manual was created using Adobe Acrobat manufactured by Adobe Systems Incorporated.
Please see “Acrobat Help” for operating information. The projector User’s Manual permits the following
searches.
•
Links are associated with the bookmarks. Clicking the desired heading of the Bookmark column will
jump to that page.
•
There are links associated with the Contents pages of the User’s Manual, the Page E-00 within the
text, and the reference pages that appear in blue. Placing the hand icon above a reference page
results in a change to a
Clicking the of the Acrobat command bar results in a return to the origin of the jump (i.e., the
previous condition).
icon. Clicking the mouse results in a jump to that page.
Download from Www.Somanuals.cEom-7. All Manuals Search And Download.
Checking the Supplied Accessories
Remove the main unit and the accessories from the box and check that the following items are included.
Remote control
Power cable (1.8 m / 5.9 feet) [1]
This power cable supplies power to the unit. See Page E-24
about connections.
(includes one button battery) [1]
This controls the projector. Please remove the transportation
V O L
N
T
S
K
V
Z O O M
C A N C E L
E N T E R
H K S T N
A U T O
U
Y r
E N
M
Y P r
A S P E C T
P I P
S V I D E O
Q U I C K
R
O F F
V I D E O
D I G I T A L
F R E E Z E
M U T E
P O W E R
O N
DVI / mini D-sub 15-pin conversion cable
(19 cm / 0.6 feet) [1]
This is used when the monitor connector of the personal com-
connections.
RGB signal cable
(mini D-sub 15-pin, 2 m / 6.6 feet) [1]
This is used when the monitor connector of the personal com-
connections.
S-Video cable (3.5 mm diameter plug / mini DIN
4-pin plug, 1.5 m / 4.9 feet) [1]
This cable is used in the connection of video equipment that
Video cable (3.5 mm diameter plug / RCA pin
plug, 1.5 m / 4.9 feet) [1]
This cable is used in the connection of video equipment that
connections.
Download from Www.Somanuals.cEom-8. All Manuals Search And Download.
Checking the Supplied Accessories
Audio cable (2.5 mm diameter plug / RCA pin
plug, 1.5 m / 4.9 feet) [1]
This cable is used with equipment that has phono type audio
Soft case (for projector/remote control and ac-
cessories) [1]
This case is used when storing the projector. The case is made
up of two portions that are joined by hook-and-loop tape to
form a single item. The case can be separated into two pieces.
Accessories
Projector/
Remote
Control
User’s Manual (CD-ROM Edition) [1]
User’s Manual (Simplified Edition) [1]
QRG (Quick Reference Guide) [1]
Warranty Card (LIMITED WARRANTY) [1]
Product Registration [1]
Replacement Sheet (Priority Replacement Program) [1]
Precautions
* Leave the power cable plugged in (for 5 to 10 minutes) until the projector returns to room
temperature before placing the projector inside the soft case. Placing the projector into the
case soon after switching off the power could cause the projector to break down.
* Be sure to attach the lens cap and place the projector into the soft case with the lens facing
upward.
Download from Www.Somanuals.cEom-9. All Manuals Search And Download.
Names of the Main Unit Parts
STATUS
POWER
POWER
MENU
SOURCE
QUICK
MENU
AUTO
AUDIO
VIDEO
U
N
E
U T O
A
M
U I C K
Q
S O U R C E
E R
U
E N
M
W
O
P
P O W E R
S T A T U S
Speaker
Remote control
Exhaust
vents
Exhaust
vents
Ventilation
slots
Remote control
Lens
(There is also one on the left side.)
Lens cap
To protect the lens, attach the lens
cap when the projector is not in use.
Precautions
The ventilation slots discharge the heat of the lamp and care must be taken not to come into
contact with them.
Download from Www.Somanuals.Eco-m1.0All Manuals Search And Download.
Names of the Main Unit Parts
OURCE
QUICK
MENU
AUT
O
AUDIO
VIDEO
PC
STATUS
Ventilation slots
POWER
Built-in security slot
(See description below.)
POWER
MENU
S
O
U
R
C
E
QUICK
MENU
AUTO
AUDIO
VIDEO
PC
Ventilation slots
Built-in Security Slot
This security slot supports the MicroSaver Security System manufactured by
Kensington Microware Inc.
Download from Www.Somanuals.Eco-m1.1All Manuals Search And Download.
Names of the Remote Control Parts
V K S T N
E N T E R
Z O O M
C A N C E L
H K S T N
A U T O
Y C b C r
M E N U
A S P E C T
S - V I D E O
Y P b P r
P I P
Q U I C K
R G B
O F F
V I D E O
D I G I T A L
F R E E Z E
M U T E
P O W E R
O N
(Displays the picture associated
with the VIDEO connector as a
smaller picture within the display
screen associated with the PC
connector)
F
ON
POWER
MUTE
OFF
PIP
(Freezes moving pictures)
FREEZE
DIGITAL
VIDEO
QUICK
(Temporarily cancels the
video and audio)
RGB
YPbPr
YCbCr
AUTO
Buttons used for input selec-
DIGITAL button, RGB button,
YPbPr button, VIDEO button, S-
VIDEO button, and YCbCr but-
ton
(Automatic adjustment of the
analog RGB moving image)
S-VIDEO
ASPECT
(Displays a simplified menu)
CANCEL
MENU
(Selects the vertical and hori-
zontal ratio of the screen)
ENTER
HKSTN
ZOOM
Buttons used for menu opera-
VKSTN
VOL
(Horizontal keystone distortion
correction display)
(Vertical keystone distortion cor-
rection display)
(Digital zoom adjustment display)
(Volume adjustment display)
+/– button
(Used in all adjustments)
Precautions
Handling of the Remote Control
* Do not drop the remote control or handle it inappropriately.
* Do not expose the remote control to water or other liquids. Should the remote control become
wet, wipe it dry immediately.
* Try to avoid use in hot and/or humid locations.
* Please keep button batteries out of the reach of children. If a battery is swallowed, promptly
obtain the medical care of a doctor.
* Remove the batteries from the remote control when it is not going to be used for a long period.
* Some operations (such as menu operations) are available only through the use of the remote
control and attention should be given to its careful handling.
Download from Www.Somanuals.Eco-m1.2All Manuals Search And Download.
Preparing the Remote Control
Button Battery Replacement
Using the remote control for the first time
The battery compartment is fitted with a transportation insulation sheet at
the time of purchase. Pull out the sheet and remove it.The remote control is
now ready for use.
Replacement Method
Insert the tip of a ballpoint pen or some other pointed object into the hole of the
battery holder, then pull out to open.
1
Remove the old battery and install a new button battery with (+) side facing up-
ward in the battery holder.
2
Purchase a CR2025 type battery for replacement.
H
N
P
A
J
S
T
L
M
R2025
3
O
V
n
C
L
L
O
2
-
LiC
E
CR2025
Insert the battery holder into the remote control and push in until the battery holder
closes with a “click” sound.
3
H
N
P
A
J
25
S
20
T
L
M
R
O
n
C
L
L
V
O
3
2
-
LiC
E
CR2025
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type (CR2025) recommended by the manufacturer.
Dispose of used batteries according to your local regulations.
Download from Www.Somanuals.Eco-m1.3All Manuals Search And Download.
Preparing the Remote Control
Remote Control Range
Point the infrared transmitter of the remote control toward the remote control sensor located at the front
or rear of the main unit and operate.
Reception of the remote control signal should generally be possible within the range illustrated below.
Remote control infrared
transmitter
4m / 13.1 feet
Remote control sensor
30°
30°
Side View
7m / 23 feet
50°
50°
7m / 23 feet
Remote control
sensor
Top View
Remote control infrared
transmitter
Note
* Exposure of the main unit’s remote control sensor or the remote control infrared transmitter to bright light or
the obstruction of the signal by an obstacle located in the pathway may prevent operation.
* The remote control will not function when the battery is exhausted.
Download from Www.Somanuals.Eco-m1.4All Manuals Search And Download.
The Procedure Up to Projecting to the Screen
Perform setup adjustments in the following order.
Position the projector
1
Determine the locations to set up the screen and the projector.
Connect the video equipment and personal computer
2
Connect your equipment to the projector.
When the personal computer has a DVI connector or a mini D-sub 15-pin connector
When the video equipment has a video connector or an S-video connector
When the video equipment has a YCbCr connector or a YPbPr connector
When playing the audio through the built-in speaker of the projector
Connecting the power cable and switching on the power
3
Switching on the power of the personal computer and video equipment
4
Properly adjust the projection image to the screen
5
Focusing
6
Selecting input equipment
7
Adjust the screen or video image
8
Adjust the image to the optimum condition as required.
See the Table of Contents (Adjustments and Settings) for the adjustment items.
About DLP projectors
Though careful attention is paid to providing optimum quality, please note that with DLP type projec-
tors, in rare cases there may be black spots or bright spots among the picture elements.
Note
* Please purchase a screen.
* A DVI-D cable (Stock No. 205202), which is available separately, is required for connections with the DVI
connector of the personal computer.
* A component cable (Stock No. 205203), which is available separately, is required to connect a DVD player or
other equipment with YCbCr connectors.
Download from Www.Somanuals.Eco-m1.5All Manuals Search And Download.
Placement Guide
G Use this information as a guide to find out about the screen size when the projector is placed at a
certain location, or to find out the approximate size of a screen that will be required.
G The projection distance over which focussing is adjustable is 1.20 m (3.9 feet) to 9.44 m (30.97 feet).
The projector should be placed within this range.
Screen Size and Projection Distance
Screen Size Designation (Inches)
200"
Height from center of
180"
lens to top edge of the
projection
150"
120"
100"
h1
h2
Height from center
of lens to bottom
edge of the projec-
tion
80"
60"
40"
26"
30.97)
–
27.72)
–
23.20)
–
1.85
–
STA
TUS
POW
ER
POWER
2.80
18.50)
–
MENU
SO
UR
CE
6.07)
12.30)
–
15.42)
MEN
QUICK
U
AUTO
–
AUDIO
9.44 (25.79
–
–
–
1.20 (3.94)
1.54
VIDE
O
PC
9.19)
–
8.45 (23.10
–
–
2.33
(7.64
(5.05
7.86
7.07 (19.32
–
7.04
5.64 (15.42
3.75 (10.24 4.70 (12.83
–
5.89
–
4.70
3.91
3.12
Unit: m (feet)
Lens surface of
the main unit
Download from Www.Somanuals.Eco-m1.6All Manuals Search And Download.
Placement Guide
Projection Distance Table
Screen Size
Designation (Inches)
Screen Size Width x Height
Projection Distance
(m) (feet)
Wide – Tele Wide – Tele
Height h1
Height h2
(m)
(feet)
(m)
(feet)
(m)
(feet)
26"
40"
0.53
ן 0.40 0.81
ן 0.61 1.22
ן 0.91 1.63
ן 1.22 2.03
ן 1.52 2.44
ן 1.83 1.74
ן 1.31 — – 1.20
— – 3.94 0.47
5.05 – 6.07 0.72
7.64 – 9.19 1.07
1.54
2.36
3.51
4.69
5.87
7.02
8.79
0.07
0.11
0.16
0.21
0.26
0.31
0.39
0.23
0.36
0.52
0.69
0.85
1.02
1.28
1.54
1.71
2.66
ן 2.00 1.54 – 1.85 60"
4.00
ן 2.99 2.33 – 2.80 80"
5.35
ן 4.00 3.12 – 3.75 10.24 –12.30 1.43 6.66
ן 4.99 3.91 – 4.70 12.83 –15.42 1.79 8.00
ן 6.00 4.70 – 5.64 15.42 –18.50 2.14 100"
120"
150"
180"
200"
3.05
ן 2.29 10.00 ן 7.51 5.89 – 7.07 19.32 –23.20 2.68 3.66
ן 2.74 12.00 ן 8.99 7.04 – 8.45 23.10 –27.72 3.21 10.53 0.47 4.06
ן 3.05 13.32 ן 10.00 7.86 – 9.44 25.79 –30.97 3.57 11.71 0.52 * There is a tolerance of 5% due to design values.
* This table uses the lens apex and lens center as references and requires that the projec-
tor be in a horizontal condition (with front and rear adjusters fully withdrawn).
Width
Screen size (Diagonal)
Height
Download from Www.Somanuals.Eco-m1.7All Manuals Search And Download.
Connecting Personal Computers and Video Equipment
G Connecting this unit with a personal computer permits presentation data to be projected as a large
screen display at conferences, lectures, and on other occasions.
Connections with PC Connectors
Please check the following matters before making connections to the
personal computer.
* Suitable resolution is 1024
ן 768 pixels (XGA), and the displayable resolution is 1280ן 1024 pixels (SXGA).
Note that input of a resolution that exceeds the displayable resolution will cease to be projected and
should this be the case, you will need to change the resolution to a displayable resolution at the
* The setting method of the personal computer will differ depending on the personal computer that you
are using. For information, read the instruction manual for your personal computer, read the on-line
help, or contact the manufacturer of your personal computer.
Personal Computers with a DVI Connector
* Make the connection with a DVI-D cable (which is available as an option) and the PC connector of the
projector.
When connecting, arrange the connectors in the proper orientation and plug in. Turn the screw knobs
and fasten to the connector of the main unit.
Monitor output
C
AUDIO VIDEO
Personal
computer
DVI-D cable (Available as an option. Stock No. 205202)
Note
* This projector uses a 29-pin DVI connector that supports the digital interface. Digital signal TMDS (Transition
Minimized Differential Signalling) of the DVI (Digital Visual Interface) standard is used.
Download from Www.Somanuals.Eco-m1.8All Manuals Search And Download.
Connecting Personal Computers and Video Equipment
Personal Computers with a mini D-Sub 15-Pin Connector
* Make the connection to the projector’s PC connector and the mini D-sub 15-pin connector through the
use of a DVI/mini D-sub 15-pin conversion cable.
* When connecting, arrange the connectors in the proper orientation and plug in.Turn the screw knobs
and fasten to the connector of the main unit.
Personal computer
PC
AUDIO VIDEO
DVI/mini D-sub 15-pin conversion
cable (Supplied item)
Monitor output
RGB signal cable (Supplied item)
Note
* Before making connections, check the power of the projector and the equipment to be connected is switched
off.
* When projection will be with a notebook computer connected, knowledge will be required for the cable connec-
tion and notebook computer startup procedure as well as the operation that follows startup. Please consult the
instruction manual of your notebook computer or the on-line help.
Download from Www.Somanuals.Eco-m1.9All Manuals Search And Download.
Connecting Personal Computers and Video Equipment
To Output the External Output Signal of a Notebook Computer
When projection will be with a notebook computer connected, knowledge will be required for the cable
connection and notebook computer startup procedure as well as the operation that follows notebook
startup. Please consult the instruction manual of your notebook computer or the on-line help while per-
forming the following procedure.
Check whether a signal is being sent from the notebook computer to the projector.
An indication appearing on the liquid crystal display of the notebook computer does not necessarily
mean that an external output signal is being output.
1
Should a sign not be output from the notebook computer, please try the operation described below.
For an IBM PC/AT, DOS/V computer, press the [Fn] key plus any one of the [F1] to [F12] keys. (See
the table below.)
2
Manufacturer
DELL
Model
Key
All computers
All computers
All computers
All computers
All computers
All computers
All computers
All computers
All computers
All computers
All computers
All computers
Fn + F8
Fn + F8
Fn + F10
Fn + F3
Fn + F7
Fn + F3
Fn + F3
Fn + F5
Fn + F7
Fn + F3
Fn + F5
Fn + F10
EPSON
FUJITSU
iiyama
IBM
NEC
Panasonic
SHARP
SONY
SOTEC
TOSHIBA
Victor
Note: Table information is current to December 2003.
Note
When the liquid crystal display of the notebook computer and the projector are displayed at the same time, the
projected image might not be correct even though the liquid crystal display shows a correct indication. Should
this occur, stop the simultaneous display of the notebook computer and try the mode with external output only.
(Try an operation such as that described in aforementioned Step 2 and try closing the liquid crystal panel which
might result in external output only.)
Download from Www.Somanuals.Eco-m2.0All Manuals Search And Download.
Connecting Personal Computers and Video Equipment
Connections with Video Connectors
Video Equipment with VIDEO Connectors
* Make the connection to the VIDEO connector of the projector using a video cable.
Video Equipment with S-VIDEO Connectors
* Make the connection to the VIDEO connector of the projector using an S-video cable.
Video deck, DVD player,
document camera, etc.
PC
AUDIO VIEO
S-VIDEO
VIDEO
S-Video cable (Suppled item)
Video cable (Supplied item)
Note
Download from Www.Somanuals.Eco-m2.1All Manuals Search And Download.
Connecting Personal Computers and Video Equipment
Connections with Component Video Sources
When the Video Connectors are Y, Cb, and Cr Connectors
* Make the connection to the projector’s VIDEO connector using a component cable (which is available
as an option).
Component cable (Available as an option)
(3.5 mm diameter, 4 Pde, Plug to RCA
ן 3) (Stock No. 205203)
Green
Blue
Red
PC
AUDIO VIDEO
Y
Cb
Cr
COMPONENT
DVD player, HD video
deck, etc.
COMPONENT
Pb
Y
Pr
Note
* YCbCr cannot accept the input of signals other than NTSC 3.58 and PAL.
* When the video connectors are Y,Pb,and Pr connectors, please contact Olympus Digital Technical Support.
Download from Www.Somanuals.Eco-m2.2All Manuals Search And Download.
Connecting Personal Computers and Video Equipment
Connections with Audio Connectors
* Make the connection to the projector’s AUDIO jack using an audio cable.
* The built-in speaker of the projector provides monaural audio.
* To enjoy convincing audio reproduction, please connect the audio output of the video equipment to
your audio system.
Video equipment, personal computer
PC
AUO VIDEO
AUDIO
L
R
White
Red
Audio cable (Supplied item)
Note
The AUDIO jack of the projector is a 2.5 mm diameter stereo mini jack. Connection is not possible using the
common (3.5 mm diameter) stereo mini jack cable from the headphone jack of the personal computer or video
equipment.
Download from Www.Somanuals.Eco-m2.3All Manuals Search And Download.
Power Cable Connections and Switching the Power On/Off
There is an order in which the power cable is connected and the power is switched on/off.
Operating
Connect the AC IN connector of the projector and the power outlet using the sup-
1
plied power cable.
The POWER indicator will light amber, the cooling fan will rotate at low speed, and the unit will enter
the standby mode.
STATUS
POWER
Lit amber
STATUS
POWER
P
O
W
ER
M
EN
To wall outlet
S
U
O
U
R
C
E
Q
U
M
ICK
EN
AU
TO
U
AUDIO
Firmly plug in all the way.
VIDEO
PC
Turning on the projector power
2
3
Main unit operation: Press and hold the POWER button for 1 second.
Remote control operation: Press the POWER ON button.
STATUS
STATUS
STATUS
POWER
POWER
POWER
ON
OFF
POWER
Lit green
Power is on
Blinks green
(Approximately 60
seconds)
POWER
The POWER indicator changes to a blinking green and lights steadily after about 60 seconds.
The projection screen brightens after about 40 seconds.
The projector is now capable of regular projection.
Switch on the power of the connected equipment
Download from Www.Somanuals.Eco-m2.4All Manuals Search And Download.
Power Cable Connections and Switching the Power On/Off
Finishing
1 Switch off the power of the connected equipment
Switch off the power of the projector
2
Main unit operation: Press and hold the POWER button for 1 second.
Remote control operation: Press the POWER OFF button.
ON
OFF
POWER
The “Power Off” indication will appear.
When the red bar extends fully (in about 5 sec-
onds), the projection screen will go off and the
unit will enter the power off operation.
Power Off
OK
?
Note
* The operation can be cancelled by pressing a but-
ton other than the POWER button.
* One more press of the POWER (POWER OFF)
button will switch off the power.
Power Off
OK
?
STATUS
STATUS
STATUS
POWER
POWER
POWER
The POWER indicator changes to blinking am-
ber and lights a steady amber after about 90 sec-
onds (when the unit enters the standby mode).
Lit amber
Standby
mode
Blinks amber
(Approximately 90
seconds)
POWER
Unplug the power cable
Check that the sound of the cooling fan is quieter and that the POWER indicator is lit steadily
in amber, then unplug the power cable.
3
The POWER indicator will go off when the power cable is unplugged.
Warning
Do not disconnect the power cable while the POWER indicator is blinking in amber. Doing so
could shorten the life of the lamp or lead to breakdown of the projector.
Download from Www.Somanuals.Eco-m2.5All Manuals Search And Download.
Adjustment of the Projection Screen
Switch on the power of the connected equipment and make the adjustments with the video signal
being input to the projector.
Projection Screen Position Adjustment
Turn the zoom ring to adjust the screen size of the projection image.
Adjust the image to match the desired screen size. When outside of the adjustment range, move the
projector to the rear or forward.
Zoom ring
Adjust the projection image to the screen.
Check that the screen is set level and vertically.
(1) If the image is shifted to the left or right, move the main unit horizontally. (Align the center of the
screen and the center of the lens of the main unit.)
(2) If the image is shifted vertically, move the image up or down with the adjuster. See “Using the Adjust-
(3) If the image is slanted, adjust by turning the right or left front adjuster. See “Using the Adjusters” on
(4) A projection image such as that illustrated in the diagram is the result of the projector not being
perpendicular to the screen. Set the projector so that it is pointing straight toward the screen.
(5) If the image shows keystone distortion, adjust using remote control or menu operations. See “Cor-
(1)
(3)
(2)
(4)
(5)
Note
* The projection image can be turned upside down or turned left to right using menu operations. See “Projection”
* A portion of the projection screen can be enlarged and moved by remote control operation. See “Enlargement
Download from Www.Somanuals.Eco-m2.6All Manuals Search And Download.
Adjustment of the Projection Screen
Using the Adjusters
Care must be taken not to come into
contact with the ventilation slots which
discharge the heat of the lamp.
Raising the projection image
While viewing the projection im-
age, press and hold the front ad-
juster buttons located at the left
and right (1) and, raise the projec-
tor to align the image with the
screen, then release your fingers
(2).
A U T O
M E N U
Q U I C K
S O U R C E
M E N U
P O W E R
P O W E R
S T A T U S
( )
1
Turn the left and right front adjust-
ers for fine adjustment.
Adjust so that there is no shaking
of the projector.
( )
2
( )
1
Lowering the projection image
Lower the front adjusters using the
operation described above.
Raise the rear adjuster. Turn the
left and right front adjusters to
make fine adjustments.
STATUS
POWER
POWER
MENU
SOURCE
QUICK
MENU
AUTO
AUDIO
VIDEO
Adjust so that there is no shaking
of the projector.
PC
Rear adjuster
Focus Adjustment
Focus ring
Turn the focus ring to the right or left and adjust
the focus.
ABC
Download from Www.Somanuals.Eco-m2.7All Manuals Search And Download.
General Operation
This section describes the use of direct operation with the main unit or remote control buttons.
Input Selection
This operation selects the input signal to be projected.
MENU
Main unit operation: Press the SOURCE button.
(It will not function while the menu or the quick menu is displayed.)
When Auto Source is On
AUTO
SOURCE
If there is no input signal at the source that was previously used,
the projector automatically selects the next source that has an
input signal.
QUICK
MENU
When Auto Source is Off
Each press of the button switches the selection one step in the
sequence of Analog RGB → YPbPr → Digital RGB → VIDEO →
S-VIDEO → YCbCr.
ON
POWER
MUTE
OFF
PIP
FREEZE
DIGITAL
VIDEO
QUICK
Remote control operation: Press the desired input se-
lection button.
RGB
YPbPr
YCbCr
AUTO
S-VIDEO
ASPECT
When Auto Source is On
When an input signal is not present at the selected source, the
projector automatically selects the next source that has an input
signal.
When Auto Source is Off
The projector switches to the selected source regardless of
whether an input signal is present.
Note
* When you do not operate source selection, the projector will assume the input selection condition that was
previously used.
Download from Www.Somanuals.Eco-m2.8All Manuals Search And Download.
General Operation
Automatic Adjustment of Analog RGB
This function automatically adjusts the position shift of the analog
RGB input signal, the size of the picture, vertical striping, and
color infidelity.
MENU
Normally, this function is adjusted automatically at the time of sig-
nal selection.
AUTO
SOURCE
Main unit operation/Remote control operation: Press the
AUTO button. (This will not function while the menu or the quick
menu is displayed.)
QUICK
MENU
A press of the AUTO button starts the automatic adjustment.
ON
POWER
MUTE
OFF
PIP
FREEZE
DIGITAL
VIDEO
QUICK
RGB
YPbPr
YCbCr
AUTO
S-VIDEO
ASPECT
Note
* If the display position is shifted, vertical lines appear on the picture, or the projection is not good even after
using automatic adjustment, please perform image adjustment manually. See “Picture Adj. / Fine Picture / H
* When the image extends beyond the boundaries of the screen or is smaller than the screen, set Aspect to
Download from Www.Somanuals.Eco-m2.9All Manuals Search And Download.
General Operation
Selection of Aspect Ratio
This function selects horizontal and vertical picture proportions of the input signal.
Press the ASPECT button while viewing the projected image and select the aspect ratio.
DIGITAL
VIDEO
QUICK
RGB
YPbPr
YCbCr
AUTO
Image of the Personal Computer
(when selecting digital RGB or analog RGB)
Each press of the ASPECT button advances the selection one
step in the sequence of Auto → Direct → Real, and then repeats.
S-VIDEO
ASPECT
Auto ............ Automatically enlarges or reduces the image to project a
full screen in a ratio of 4:3
Direct .......... Maintains the aspect ratio and projects a picture of the maxi-
mum displayable size
CANCEL
MENU
Real ............ Projects the input signal without pixel conversion
Input Signal
The setting is higher than
Auto
Direct
Real
the display resolution of
the projector.
The setting is lower than
the display resolution of
the projector.
Image of the Video Equipment
(when selecting VIDEO, S-VIDEO, YCbCr, or YPbPr)
Each press of the ASPECT button advances the selection one step in the sequence of Auto → Wide →
Zoom, and then repeats.
Auto ............ While maintaining the aspect ratio, projects a full screen so that no portions extend beyond the bound-
aries of the screen. The top and bottom of the 16:9 image becomes black.
Wide ........... Projects to fill the full width with the entire image at 16:9. (This feature is used to project a squeezed
image in a proper aspect ratio.)
Zoom .......... Projects only the 4:3 portion within 16:9 image to fill the screen. (Portion that extend off screen is cut.)
Aspect ratio selection
Auto
Wide
Zoom
4:3 screen
16:9 screen
Note
Please note that using this monitor for the purpose of commercial gain or the attraction of public attention in a
venue such as a coffee shop or hotel and projecting a 4:3 screen in wide mode or leaving a squeezed screen as a
compressed image raises concern about the infringement of copyright rights which are protected by copyright
law.
Download from Www.Somanuals.Eco-m3.0All Manuals Search And Download.
General Operation
Projecting a Picture in Picture
Sub-picture
This function displays the video image (i.e., the picture of the
VIDEO connector input) on the personal computer screen (i.e.,
the PC connector input screen) as a sub-picture.
Each press of the PIP button advances the screen size of the
sub-picture one step in the sequence of On → Off (i.e., the
sub-picture display is off), and then repeats.
Main-picture
Note
* The main picture is termed the Analog RGB, Digital RGB, or YPbPr
input screen, whereas the sub-picture is termed the VIDEO, S-VIDEO,
and YCbCr input screen.
* The sub-picture cannot be displayed when the main screen receives
the image from the VIDEO connector.
* The sub-picture cannot be displayed when picture in picture is set
ON
POWER
MUTE
OFF
PIP
FREEZE
DIGITAL
VIDEO
QUICK
to off.
* To change the display position of the sub-picture, see “Picture in
RGB
YPbPr
YCbCr
AUTO
S-VIDEO
ASPECT
Freezing a Moving Picture
This function is used to stop and view a moving picture. Note that
the input image continues to advance even though the picture
there is a still picture condition.
ON
POWER
MUTE
OFF
PIP
FREEZE
DIGITAL
VIDEO
QUICK
To change the screen to a still image, press the FREEZE but-
ton. Press the button again to return to the moving picture.
RGB
YPbPr
YCbCr
AUTO
S-VIDEO
ASPECT
Note
During a picture in picture display, both the main picture and the sub-
picture become still pictures.
Suspending Video and Audio Temporarily
This function is used to cancel the video and audio at the same
time.
ON
POWER
MUTE
OFF
PIP
FREEZE
DIGITAL
VIDEO
Press the MUTE button to cancel the video and the audio.
A further press brings a return to the original condition.
RGB
YPbPr
YCbCr
S-VIDEO
Download from Www.Somanuals.Eco-m3.1All Manuals Search And Download.
General Operation
Using the Quick Menu
This function permits commonly used adjustments to
be performed quickly.
Note that the Quick Menu will not be displayed unless the signal
of the connected equipment is input. Please select the input that
you wish to adjust.
MENU
Main unit operation
(1) A press of the QUICK MENU button brings up the quick ad-
justment display. Further presses allow selection of the de-
sired adjustment display.
(2) Press the
or
button to make the adjustment.
AUTO
SOURCE
(3) To close the display immediately, press the MENU button.
In the absence of operations for a period of about 10 sec-
onds, the display will close automatically.
QUICK
MENU
(1)
(3)
Remote control operation
(1) A press of the QUICK button brings up the quick adjustment
display. Further presses cause the adjustment display to
change in sequence.
QUICK
ASPECT
AUTO
The adjustment display can be selected with use of either the
cursor L or M button.
CANCEL
VKSTN
MENU
ᮤ
ᮣ
(2) Press the cursor or button to make the adjustment.
(3) To close the display immediately, press the CANCEL button.
In the absence of operations for a period of about 10 sec-
onds, the display will close automatically.
ENTER
HKSTN
(2)
Download from Www.Somanuals.Eco-m3.2All Manuals Search And Download.
General Operation
Content of Adjustments and Settings
Example: Brightness adjustment display
–
+
Brightness
0
Display Item
Adjustment/Setting
Brightness
Contrast
Adjusts the brightness of the image.
Brightness decreases in the (–) direction and increases in the (+) direction.
Adjusts the contrast of the image.
Contrast becomes less distinct in the (–) direction and more pronounced in the
(+) direction.
V Keystone
H Keystone
Corrects (vertical) keystone distortion of the screen.
Adjusts the left and right edges of the screen so that they are parallel.
Corrects (horizontal) keystone distortion of the screen.
Adjusts the up and down edges of the screen so that they are parallel.
Picture in Picture
The picture from the VIDEO jack is displayed as a sub-picture on the input
screen from the PC connector.
This function selects either the size of the sub-picture on or off (i.e., no display).
(Neither the adjustment display nor the picture will be output unless the signal is
display position of the sub-picture.
Volume
This function adjusts the volume of the built-in speaker.
The volume decreases in the (–) direction and increases in the (+) direction.
Quick Color Adj.
Select the preset color mode.
Download from Www.Somanuals.Eco-m3.3All Manuals Search And Download.
General Operation
Correcting Keystone Distortion of the Projection Screen
This adjustment is used when the projection screen is dis-
torted.
(3)
Note that extreme distortion cannot be corrected and in such cir-
cumstances the projector should be placed to face the screen
straight on beforehand.
CANCEL
MENU
ENTER
HKSTN
ZOOM
VKSTN
(1)
(1)
VOL
(2)
Adjustment Method
(1) To adjust up-down distortion (e.g., Screen Example 1), press
the HKSTN button. The horizontal keystone adjustment dis-
play will appear.
–
+
Screen Example 1
H Keystone
0
To adjust left-right distortion (e.g., Screen Example 2), press
the VKSTN button. The vertical keystone adjustment display
will appear.
–
+
V Keystone
0
Screen Example 2
(2) While viewing the screen, press the (+) button or the (–) but-
ton and adjust the vertical or horizontal edges to be parallel.
In Screen Example 3, horizontal and vertical keystone distor-
tion should be adjusted.
(3) To close the display immediately, press the CANCEL button.
In the absence of operations for a period of about 10 sec-
onds, the display will close automatically.
Screen Example 3
Note
* Overcompensation of the horizontal keystone correction value will result in a narrowing of the vertical keystone
adjustment range. Likewise, overcompensation of the vertical keystone correction value results in a narrowed
horizontal adjustment range.
* Note that the adjustment range will differ depending on the adjustment conditions.
* The screen examples have been depicted in an exaggerated form to aid in description.
Download from Www.Somanuals.Eco-m3.4All Manuals Search And Download.
General Operation
Enlargement of the Image and Video Movement
This function digitally enlarges the personal computer image and
video image (up to 10 times).
(3)
(4)
(1) Press the ZOOM button.
The zoom selection display will appear.
CANCEL
MENU
–
+
Zoom
0
ENTER
(2) Enlarge to the desired size.
HKSTN
ZOOM
Each press of the (+) button enlarges the image and each
press of the (–) button makes the image smaller (returning it
to 1:1).
VKSTN
VOL
ᮤ ᮣ
(3) Pressing the cursor (LM
) buttons at the time of the zoom
(2)
operation will cause the display position to move.
(There will not be any movement when zoom is at 0.)
(1)
(4) To close the display immediately, press the CANCEL button.
In the absence of operations for a period of about 10 sec-
onds, the display will close automatically.
(1)
(2)
(3)
(No enlargement)
(Approximately 2 times enlargement)
(Movement)
Note
After magnifying the image, be sure to use the ZOOM button to bring the gauge value back to “0”.
The image can also be moved in the following circumstances.
*
When “Aspect” is set to “Real” by the signal of the personal computer, and the input resolution is
higher than the display resolution of the projector.
*
When “Aspect” is set to “Zoom” by the video signal.
Note
* Zoom and image movement functions are cancelled when the input is switched.
* The greater the zoom enlargement, the less distinct the image will appear. The reason for this is that the dots
are being digitally corrected so that they are not conspicuous.
* Movement of the screen will not be possible when the menu screen is being displayed.
Download from Www.Somanuals.Eco-m3.5All Manuals Search And Download.
General Operation
Adjustment of the Volume
This function adjusts the volume of the built-in speaker.
(3)
(1) Press the VOL button.
CANCEL
The volume adjustment display will appear.
MENU
–
+
Volume
53
ENTER
HKSTN
ZOOM
(2) Adjust the volume.
VKSTN
VOL
The (+) button increases the volume and the (–) button de-
creases the volume.
(3) To close the display immediately, press the CANCEL button.
In the absence of operations for a period of about 10 sec-
onds, the display will close automatically.
(2)
(1)
Note
When an image is not being projected, there will not be any sound even if the volume is adjusted.
Download from Www.Somanuals.Eco-m3.6All Manuals Search And Download.
Menu Operation Method
G This section describes only the menu operation method. Please see this page should you need infor-
mation while performing menu operations.
G For information about a menu function, adjustment, or setting, please see one of the pages containing
such descriptions.
G Adjustments and settings are made by projecting an image and adjusting to an optimum condition.
G The remote control should be pointed toward the remote control sensor of the projector and operated.
G To return the various items that have been changed via the menu to their standard values (i.e., default
values at time of shipping from the factory), see “Factory Default” on Page E-59. (Some items will not
return to their initial values.)
G The adjustment/setting items and contents will differ depending on the input selection and the adjust-
ment/setting items that can be used with the input signal are displayed on the menu.
Names and Functions of the Parts
Names and Functions of the Remote Control Buttons that Operate Via a
Menu
MENU button
Used for menu display and menu closure.
ON
POWER
MUTE
OFF
PIP
ᮤ ᮣ
FREEZE
DIGITAL
VIDEO
QUICK
Cursor (LM
) buttons
Used in the selection of menu names and item names as
well as in setting and adjusting the item contents.
RGB
YPbPr
YCbCr
AUTO
S-VIDEO
ASPECT
CANCEL button
Used to return to menu name selection as well as to close
the menu (and the sub menu display).
ENTER
ENTER button
Used to set the verification display.
ZOOM
VOL
Download from Www.Somanuals.Eco-m3.7All Manuals Search And Download.
Menu Operation Method
Names and Functions of the Main Unit Buttons Used in Menu Operation
MENU button
Used to display menus, to return to menu name selections, and
to close menus (i.e., closing sub menu displays).
STATUS
POWER
MENU
Also serves the function of the remote control CANCEL button.
(AUTO) button
Advances the selection of menu names. Advances the setting/
adjustment values of the item contents.
SOURCE
POWER
AUTO
Also serves the function of the remote control ENTER button.
QUICK
MENU
(QUICK MENU) button
Used in the selection of item names.
(SOURCE) button
Returns to the selection of menu names. Advances the setting/
adjustment values of the item contents.
Names and Functions of Menu Screen Parts
Menu Names
Cursor (dark blue)
The setting/adjustment of the cursor
position can be performed.
These are the menu titles. When a menu is selected,
the display changes to the title screen. The selected
menu name appears in red.
Image
Color
View
Setup
Info.
Aspect
Auto
3
Item Name
Filter
The name of the ad-
justment/setting
Projection
Key
+
–
V Keystone
0
+
–
H Keystone
0
Sub Menu
Off
Keystone Save
Adjustment bar setting contents
Adjustment bar:Indicates the adjustment condition by
increases or decreases in bar length
Setting contents: Displays the set contents
Icon: Displays the sub menu or setting contents
Download from Www.Somanuals.Eco-m3.8All Manuals Search And Download.
Menu Operation Method
Performing Menu Operations
G The menu operations of the main unit buttons differ from those of the remote control buttons.
When both the main unit and remote control button operations are the same, the operation is de-
scribed under the remote control operation; however, only when different, the operation will also be
described under “Main unit operation”.
G When a signal is not being input, only “Color”, “Setup” and “Info.” can be selected.
(“Color” can be selected for Video and S-Video source only.)
G When a button is pressed and the next button operation is not entered within 30 seconds, the menu
display will close.
G Adjustment and settings values will be maintained in storage even when the power has been switched
off or the power plug has been disconnected.
(Note that some items are not stored.)
Preparation Switch on the power of the connected equipment, start the play operation or an-
other operation, and input the signal to the projector.
Select the input that you wish to adjust.
The menu display of the description diagram depicts an example in which the “H Key-
stone” item name is selected.
Menu Display
1
Press the MENU button to display the menu
Image
Color
View
Setup
Info.
CANCEL
VKSTN
MENU
+
+
+
+
+
–
Brightness
Contrast
Color
0
0
0
0
0
–
–
–
–
ENTER
Tint
Sharpness
Reset
HKSTN
The menu name that existed when the menu was closed previously will be displayed.
Note
A press of the main unit MENU button will change the function of the SOURCE button, AUTO button, and
QUICK MENU button to that of cursor buttons.
Download from Www.Somanuals.Eco-m3.9All Manuals Search And Download.
Menu Operation Method
Selection of the Menu Name
ᮤ ᮣ
2
Press the cursor (
) button to select the menu name
Red
CANCEL
MENU
Image
Color
View
Setup
Info.
ENTER
Aspect
Auto
3
Filter
Projection
Keystone
HKSTN
VKSTN
ᮣ
Each press of the cursor ( ) button advances the selection one step in the sequence of “Color” →
ᮤ
“View” → “Setup” → “Info.” → “Image”. Each press of the cursor ( ) button causes a return of one
step.
The selected menu name will appear in red.
Note
At the time of menu name selection, check that the item name cursor is not being displayed.
To cancel the display of the cursor, press the CANCEL button on the remote control or the MENU button on
the main unit.
Displaying the Cursor
3
Press the cursor (M) button to display the cursor
Cursor: Dark blue
CANCEL
MENU
Image
Color
View
Setup
Info.
ENTER
Aspect
Filter
Auto
3
Projection
Keystone
HKSTN
VKSTN
This condition allows selection of the
item name.
Download from Www.Somanuals.Eco-m4.0All Manuals Search And Download.
Menu Operation Method
Selection of the Item Name
4
Press the cursor (LM) button to align the cursor with the item name
CANCEL
MENU
Image
Color
View
Setup
Info.
ENTER
Aspect
Auto
3
Filter
Projection
Keystone
HKSTN
VKSTN
Main unit operation: Press the (QUICK MENU) button. When the cursor has moved to the very
bottom of the items, another press will move it to the very top of the items.
ᮣ
Press the cursor ( ) button since the “Key-
stone” example of the description diagram
Image
Color
View
Setup
Info.
Aspect
Filter
Auto
3
displays the
displayed.
icon. The sub menu will be
Projection
Press the cursor (M) button and align the cur-
sor with the desired item name.
+
Key
V Keystone
–
0
+
–
H Keystone
0
When the
icon is displayed and depend-
Off
Keystone Save
ing on the item contents, a press of the cur-
ᮣ
sor ( ) button will result in the setting display,
a resetting of the adjustment value, or a re-
setting verification display.Please see the vari-
ous item descriptions.
Making Adjustments/Settings
ᮤ ᮣ
5
Press the cursor (
) button and make the adjustment (or setting)
while viewing the image
When a button is pressed, the image will also change.
Image
Color
View
Setup
Info.
CANCEL
MENU
HKSTN
Aspect
Filter
Auto
3
ENTER
Projection
+
Key
V Keystone
–
0
+
–
H Keystone
0
VKSTN
Off
Keystone Save
Adjustment display: Each press of the button results in a change of 1 point and continued presses
cause changes to proceed in order.
Setting display: The setting contents display changes with each press of the button.
Download from Www.Somanuals.Eco-m4.1All Manuals Search And Download.
Menu Operation Method
Closing the Menu
6
Press the MENU button and close the menu display
CANCEL
MENU
ENTER
HKSTN
VKSTN
Main unit operation: Press the MENU button and cancel the cursor display.
When a sub menu is displayed, press the MENU button to close the sub menu, then press again to
cancel the cursor. This condition allows the menu name to be selected.
MENU
Image
Color
View
Setup
Info.
Aspect
Filter
Auto
Cursor
3
Projection
Keystone
SOURCE
AUTO
QUICK
MENU
Image
Color
View
Setup
Info.
A press of the MENU button while the
cursor is not displayed will close the menu
display.
Aspect
Auto
3
Filter
Projection
Keystone
Download from Www.Somanuals.Eco-m4.2All Manuals Search And Download.
Menu Operation Method
Selecting Another Menu Name with Remote Control Operation
When a sub menu is displayed, press the CAN-
CEL button and close the sub menu.
Press the CANCEL button again and cancel the
cursor display.
Image
Image
Image
Color
View
View
View
Setup
Info.
Aspect
Filter
Auto
3
Projection
Keystone
CANCEL
MENU
Color
Setup
Info.
ENTER
Aspect
Auto
3
Filter
HKSTN
VKSTN
Projection
Keystone
ᮤ ᮣ
Press the cursor (
) button and select the menu
Color
Setup
Info.
name. (Selection of the menu name is not pos-
sible while the cursor is displayed.)
+
+
+
+
+
–
–
–
–
–
Brightness
Contrast
Color
0
0
0
0
0
Tint
Sharpness
Reset
CANCEL
MENU
ENTER
HKSTN
VKSTN
Note
A press of the QUICK button while the menu is displayed will close the menu and display the quick menu. A press
of the MENU button while the quick menu is displayed will close the quick menu and display the menu.
Download from Www.Somanuals.Eco-m4.3All Manuals Search And Download.
Menu Operation Method
List of Item Names Offering Input Selection and Adjustments/Settings
The item names that can be adjusted/set will differ depending on the input signal.
[Example of Menu Display Items at the Time of Input Signal Video Selection]
Image
Color
View
Setup
Info.
Aspect
Filter
Auto
3
Projection
+
Keys
V Keystone
–
0
+
–
H Keystone
0
Off
Keystone Save
Input Signal
Sub Menu Item
Name
Reference
Menu Name
Item Name
Page
AnalogDRigGitBal RGB
Video S-Video
YPbPrYCbCr
E-46
Brightness
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
E-46
E-47
E-47
E-47
E-47
E-46
E-46
E-49
E-49
E-50
E-50
E-52
E-52
E-53
E-53
E-54
E-54
Contrast
Picture Adj.
Fine Picture
H Position
V Position
Color
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
Image
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
Tint
ࠗ
ࠗ
Sharpness
Reset
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
Quick Color Adj.
Gamma
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
Color
Color Temp.
White
Color System
Color Space
Aspect
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
Filter
Projection
Vertical Flip
Horizontal Flip
V Keystone
H Keystone
Keystone Save
Size
View
Keystone
Picture in Picture
Position
“Tint” can be adjusted only at the time of NTSC composite/S signal input.
Download from Www.Somanuals.Eco-m4.4All Manuals Search And Download.
Menu Operation Method
[Example of Menu Display Items at the Time of Input Signal Video Selection]
Image
Color
View
Setup
Info.
Language
Auto Source
Auto Power Off
On Screen
Menu Position
YPbPr
On
Off
On
Disable
Black
Background
Input Signal
Reference
Sub Menu Item
Name
Menu Name
Setup
Item Name
AnalogDRigGitBal RGB
Video S-Video
Page
YPbPrYCbCr
E-55
E-55
E-56
E-56
E-57
E-57
E-59
E-59
E-60
E-60
Language
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
Auto Source
Auto Power Off
On Screen
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
Menu Position
YPbPr
Background
White Balance
Status
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
Factory Default
Lamp Timer Reset
Resolution
Info.
Frequency
Lamp Timer
ࠗ
ࠗ
ࠗ
ࠗ
Download from Www.Somanuals.Eco-m4.5All Manuals Search And Download.
Image
G Perform this operation while projecting the picture for which the adjustment/setting will be made.
G Select the menu name “Image”.
The item name display will differ depending on the input signal. See “List of Item Names Offering Input
Brightness / Contrast / Color / Tint / Sharpness
Picture qualities such as brightness and contrast will
change depending on the whether the room is bright or
dark. Please adjust to suit your preference.
+
+
+
+
+
–
–
–
–
–
Brightness
Contrast
Color
0
0
0
0
0
Tint
Select the desired item name and then adjust with the cursor
Sharpness
Reset
ᮤ ᮣ
(
) buttons.
ᮣ
Cursor ( ) Button
ᮤ
Cursor ( ) Button
Item Name
Brightness
Contrast
Color
Brighter
Darker
More contrast
Denser color
More green
Less contrast
Less dense color
More red
Tint
Sharper image
Sharpness
Softer image
Note
* The adjustment values of the adjustable items are stored according to input source.
* “Tint” can be adjusted only at the time of NTSC composite/S signal input.
Download from Www.Somanuals.Eco-m4.6All Manuals Search And Download.
Image
Picture Adj. / Fine Picture / H Position / V Position
These adjustments are available when analog RGB signals
are input.
Usually, automatic adjustment is performed at the time of sig-
nal selection, but when automatic adjustment is not effec-
+
+
+
+
+
+
–
–
–
–
–
–
Brightness
0
0
Contrast
Picture Adj.
-32
26
0
Fine Picture
tive, these adjustments can be performed.
H Position
V Position
Reset
0
Note
When the image extends beyond the boundaries of the screen or
→
is smaller than the screen, check that the “View”
“Aspect”
Picture Adj. (Picture Adjustment)
Adjust this when bright and dark vertical bands appear on the
screen.
Select the “Picture Adj.” item name and adjust with the cursor
ᮤ ᮣ
(
) buttons so that the vertical bands disappear and bright-
ness becomes uniform across the screen.
Fine Picture
Adjust this when the picture shows a lack of color fidelity or
flickering.
Select the “Fine Picture”item name and adjust with the cursor
ᮤ ᮣ
(
) buttons so that the lack of color fidelity or the flickering
disappears.
Download from Www.Somanuals.Eco-m4.7All Manuals Search And Download.
Image
H Position
Adjust this when the picture is shifted to the left or right.
Select the “H Position” item name and adjust with the cursor
ᮤ ᮣ
(
) buttons.
V Position
Adjust this when the picture is shifted up or down.
Select the “V Position” item name and adjust with the cursor
ᮤ ᮣ
(
) buttons.
Reset
This function resets (i.e., returns to the standard settings)
the adjustment/setting value of the “Image” menu name.
+
+
+
+
+
–
–
–
–
–
Brightness
Contrast
Color
0
0
0
0
0
ᮣ
A press of the cursor ( ) button forces the reset.
Tint
Sharpness
Reset
Note
* The item name “Fine Picture” at the time of analog RGB input will not be reset.
* “Reset” of the menu name “Image” can be reset for each input source.
* To reset the adjustments/settings of all the menu items (while noting that there are some items that cannot be
Download from Www.Somanuals.Eco-m4.8All Manuals Search And Download.
Color
G Perform this operation while projecting the picture for which the adjustment/setting will be made.
G Select the menu name “Color”.
The item name display will differ depending on the input signal. See “List of Item Names Offering Input
Quick Color Adj.
Select the preset color mode.
Select “Quick Color Adj.” from the menu, then use the cursor but-
ᮤ ᮣ
tons (
) to select the setting.
Color........... Select this to prioritize color.
Standard ..... Select this to prioritize brightness.
* When “Color” or “Standard” is selected, the “Gamma”, “Color Temp.” and “White”
adjustment items are displayed in gray and cannot be selected or adjusted.
Custom ....... “Gamma”, “Color Temp.” and “White” adjustment items can
be selected and adjusted
Quick Color Adj.
Gamma
Custom
Normal
Normal
High
Color Temp.
White
* The selected values for the different adjustment items are stored in the memory so
the desired color adjustments can be set.
Gamma
Gamma corrects the proportion of change of the dark por-
tions from the bright portions of the input signal.
Set this to reproduce natural color tone or to distinctly project
a personal computer picture in a bright conference room.
Select the “Gamma” item name and select the setting contents
ᮤ ᮣ
with the cursor (
) buttons.
Quick Color Adj.
Gamma
Custom
Normal
Normal
High
Color Temp.
White
Normal ....... Correction with standard settings
Natural ........ Corrects for natural color tones
Real ............ Corrects with emphasis on brightness
Color Temp.
The screen color is affected by the color of the illumination
and other extraneous light.
This function adjusts the white, which is the reference color
for video equipment, and improves the quality of color repro-
duction. Adjustment can also be used to enhance skin col-
ors.
Select the item name “Color Temp.” and select the setting con-
Quick Color Adj.
Gamma
Custom
Normal
Normal
High
ᮤ ᮣ
tents with the cursor (
) buttons.
Color Temp.
White
Low ............ Produces warm whites (reddish)
Medium ...... Produces warm whites (yellowish)
Normal ....... Produces the white of sunlight
High ............ Produces cool whites (bluish)
Download from Www.Somanuals.Eco-m4.9All Manuals Search And Download.
Color
White
When projecting, this function is used to emphasize the
whites of text or diagrams on the personal computer.
Select item name “White” and select the setting contents with the
Quick Color Adj.
Gamma
Custom
Normal
Normal
High
ᮤ ᮣ
cursor (
) buttons.
Color Temp.
White
Select the desired degree of white from among “Low”, “Medium”,
and “High”.
Color System
This function sets the color system of the video signal.
Normally, this should be set to Auto. Set this function when
the system cannot be identified with Auto.
Select item name “Color System” and select the setting contents
Quick Color Adj.
Gamma
Standard
Normal
Normal
High
ᮤ ᮣ
with the cursor (
) buttons.
Color Temp.
White
Auto ............ Automatic identification
NTSC .......... Fixes the setting to NTSC
PAL ............. Fixes the setting to PAL
SECAM ....... Fixes the setting to SECAM
Color System
Auto
Color Space
Set this function when a component signal (YCbCr orYPbPr)
is projected and the image is extremely red or extremely
green.
Quick Color Adj.
Gamma
Standard
Normal
Normal
High
Color Temp.
White
ᮤ ᮣ
Select the item name “Color Space” and use the cursor (
)
buttons to select a color space setting that provides a normal im-
age.
Color System
Color Space
Auto
YCbCr601
Selection contents at the time ofYCbCr input
YCbCr601, YCbCr709, YCbCrSMPT
Quick Color Adj.
Gamma
Standard
Normal
Normal
High
Color Temp.
White
Selection contents at the time ofYPbPr input
YPbPr601, YPbPr709, YPbPrSMPT
Color Space
YPbPr601
Note
* When the component signal undergoes conversion processing to red, green, and blue which express the image
of the projector, the correct color cannot be reproduced unless a system compliant with the color difference
conversion system of the input signal is used. Color Space serves to make this selection.
Download from Www.Somanuals.Eco-m5.0All Manuals Search And Download.
View
G Perform this operation while projecting the picture for which the adjustment/setting will be made.
G Select the menu name “View”.
The item name display will differ depending on the input signal. See “List of Item Names Offering Input
Aspect
This function sets the horizontal and vertical picture propor-
Aspect
Auto
tions of the input signal.
Filter
3
Projection
Keystone
Picture in Picture
Select the item name “ASPECT” and select the setting contents
ᮤ ᮣ
with the cursor (
) buttons.
Personal Computer Signal
Auto ............ Automatically enlarges or reduces the image to project a full screen in a ratio of 4:3
Direct .......... Maintains the aspect ratio and projects a picture of the maximum displayable size
Real ............ Projects the input signal without pixel conversion
Input Signal
Auto
Direct
Real
The setting is higher
than the display reso-
lution of the projector.
The setting is lower
than the display reso-
lution of the projector.
Video Signals
Auto ............ While maintaining the aspect ratio, projects a full screen so that no portions extend beyond the bound-
aries of the screen. The top and bottom of the 16:9 image becomes black.
Wide ........... Projects to fill the full width with the entire image at 16:9.
(This feature is used to project a squeezed image in a proper aspect ratio.)
Zoom .......... Projects only the 4:3 portion within 16:9 image to fill the screen.
(Portion that extend off screen is cut.)
Aspect ratio selection
Auto
Wide
Zoom
4:3 screen
16:9 screen
Download from Www.Somanuals.Eco-m5.1All Manuals Search And Download.
View
Filter
This function sets the sharpness when the input signal is
adjusted to the resolution of the projector and enlarged or
reduced.
Select the item name “Filter” and select the setting contents with
Aspect
Auto
ᮤ ᮣ
the cursor (
) buttons.
Filter
3
Projection
Keystone
Picture in Picture
Smaller numerical values result in a sharper picture and larger
values result in a softer picture. Please select your desired setting
value.
Projection
This function selects the projection orientation to the
screen. It is set when the projector projects to the front or
the rear of the screen.
Aspect
Auto
Filter
3
ᮣ
1. Select item name “Projection” and press the cursor ( ) but-
ton. The sub menu will open.
Projection
Keystone
Aspect
Filter
Auto
3
2.Select “Vertical Flip” or “Horizontal Flip” with the cursor (LM)
ᮤ ᮣ
buttons and set to “On”or “Off”with the cursor (
) buttons
Projec
Off
Vertical Flip
(or with the main unit ( ) button).
Keysto
Horizontal Flip
Off
“Vertical Flip” Off
“Vertical Flip” Off
“Vertical Flip” On
“Vertical Flip” On
“Horizontal Flip” Off
“Horizontal Flip” On
“Horizontal Flip” On
“Horizontal Flip” Off
Download from Www.Somanuals.Eco-m5.2All Manuals Search And Download.
View
Keystone
This function corrects the keystone distortion of the pro-
jected picture on the screen. Adjust so that the edges are
parallel in the vertical and the horizontal directions.
Aspect
Auto
3
ᮣ
1. Select item name “Keystone” and press the cursor ( ) but-
ton. The sub menu will open.
Filter
Projection
Keystone
2. Select “V Keystone” or “H Keystone” with the cursor (LM)
Aspect
Filter
Auto
3
ᮤ ᮣ
buttons and adjust with the cursor (
main unit ( ) button).
) buttons (or with the
Projection
+
–
Keys
V Keystone
0
+
–
H Keystone
0
Off
Keystone Save
CANCEL
MENU
Vertical keystone
(–) direction
Vertical keystone
(+) direction
ENTER
HKSTN
VKSTN
Pressing the button corrects the
projected picture in the direction of
the dotted screen outline.
Horizontal keystone
Horizontal keystone
(+) direction
(–) direction
Note
* Overcompensation of the vertical keystone correction value will result in a narrowing of the horizontal keystone
adjustment range. Likewise, overcompensation of the horizontal keystone correction value results in a nar-
rowed vertical adjustment range.
* Menus and other on-screen displays are not adjusted.
* The screen examples have been depicted in an exaggerated form to aid in description.
Download from Www.Somanuals.Eco-m5.3All Manuals Search And Download.
View
Keystone Save
This function is used to save the keystone adjustment values.
Setting Keystone Save to on will set the previous keystone adjustment values when projecting after the
power cable has been disconnected and then reconnected.
ᮣ
1. Select item name “Keystone” and press the cursor ( ) but-
ton. The sub menu will open.
Aspect
Filter
Auto
3
Projection
2. Select “Keystone Save” with the cursor (LM) buttons and
+
+
–
–
Keys
V Keystone
0
0
ᮤ ᮣ
set with the cursor (
button).
) buttons (or with the main unit (
)
H Keystone
Off
Keystone Save
Off .............. The keystone adjustment values return to the initial values when the power cable is unplugged.
On............... The keystone adjustment values are retained in storage even when the power cable has been unplugged.
Note
Regardless of whether Keystone Save is set to “On” or “Off”, when projection is from the standby condition, the
picture is projected using the previous keystone adjustment values.
Picture in Picture
This function displays the picture from the VIDEO jack as a
sub-picture on the input screen (i.e., the main picture) from
the PC connector.
Aspect
Auto
3
Filter
Projection
Keystone
Picture in Picture
ᮣ
1. Select item name “Picture in Picture” and press the cursor (
)
button. The sub menu will open.
Aspect
Auto
3
Filter
2. Select “Size” or “Position” with the cursor (LM) buttons and set
Projection
Keystone
ᮤ ᮣ
with the cursor (
) buttons (or with the main unit ( ) button).
Picture in P
Size
Off
Position
Size Settings
On
Off
Sub-picture
Main-picture
Position Settings
Display at upper left of main screen
Display at upper right of main screen
Display at center of main screen
Display at lower left of main screen
Display at lower right of main screen
Note
• Sizes of a sub-picture vary depending on the signal input to the PC connector.
• The adjustment display and picture will not appear unless a signal is input to the PC connector.
Download from Www.Somanuals.Eco-m5.4All Manuals Search And Download.
Setup
G Select menu name “Setup”.
The item name display will differ depending on the input signal. See “List of Item Names Offering Input
Language
Language
This function sets the language that is displayed on screen
in the messages and menu displays.
Auto Source
Auto Power Off
On Screen
On
Off
On
ᮣ
1. Select item name “Language” and press the cursor ( ) button.
The selection display will open.
Menu Position
YPbPr
Disable
Black
Background
2. Select with the cursor (LM) buttons (or with the main unit (
)
English
Language
Deutsch
button).
Auto Source
Auto Power Off
On Screen
Menu Position
YPbPr
Français
Italiano
Español
Svenska
Background
Auto Source
Language
The Auto Source function automatically detects the input sig-
nal when the power supply is switched on and when the in-
put is switched.
Auto Source
Auto Power Off
On Screen
Menu Position
YPbPr
On
Off
On
Select the item name “Auto Source” and select the setting con-
Disable
Black
ᮤ ᮣ
tents with the cursor (
) buttons.
Background
On............... Switches on the automatic detection function
Off .............. Switches off the automatic detection function
Order of Signal Detection
→
→
→
→
→
The search is repeated in the order of Analog RGB
YPbPr
Digital RGB
Video
S-Video
YCbCr. When a signal is detected, the search is stopped and the image is projected.
Note
Set “YPbPr” to “Enable” (i.e., valid) when inputting a component signal YPbPr.
Download from Www.Somanuals.Eco-m5.5All Manuals Search And Download.
Setup
Auto Power Off
This function switches off the projector power automatically
when the input of the projector enters a no-signal condition.
Language
Auto Source
Auto Power Off
On Screen
Menu Position
YPbPr
On
Off
On
Select item name “Auto Power Off” and select the setting con-
ᮤ ᮣ
tents with the cursor (
) buttons.
Disable
Black
Background
On............... The power is switched off when there is no signal.
Off .............. The power is not switch off even when there is no signal.
Operation when Function is On
*
The “No Signal Power Off” display appears when a no-signal
condition continues for approximately 10 seconds. The power
is switched off about 5 minutes after this.
No Signal
Power Off
*
If a signal is input during the appearance of the display and an
operation button other than the POWER button is pressed, the
display is closed and the function is cancelled.
Note
Some video decks and other equipment output a blue background or other video when playback ends. When this
happens, a signal is being input to the projector and “Auto Power Off” is not activated.
On Screen
Language
This function switches on or off messages that are displayed
in a black frame.
Auto Source
Auto Power Off
On Screen
Menu Position
YPbPr
On
Off
On
Select item name “On Screen” and select the setting contents
ᮤ ᮣ
with the cursor (
) buttons.
Disable
Black
Background
On............... The message is displayed.
Off .............. The message is not displayed.
Example of a display when the
ASPECT button is pressed
Note
Even when set to off, messages that are not in a black frame will be
displayed.
Wide
Download from Www.Somanuals.Eco-m5.6All Manuals Search And Download.
Setup
Menu Position
This function sets the display position of the menu.
Language
Auto Source
Auto Power Off
On Screen
Menu Position
YPbPr
On
Off
On
Select item name “Menu Position” and select the setting contents
ᮤ ᮣ
with the cursor (
) buttons.
Disable
Black
.............. Displays on the left side
.............. Displays on the right side
Background
YPbPr
This setting causes the projector not to accept component
YPbPr signals.
Language
Auto Source
Auto Power Off
On Screen
Menu Position
YPbPr
On
Off
On
Select item name “YPbPr” and select the setting contents with the
ᮤ ᮣ
cursor (
) buttons.
Disable ....... Function is made invalid and input selection is not permit-
Disable
ted
Background
Black
Enable......... Function is made valid and input selection is made possible.
Background
This function sets the screen color when the input source is
no-signal.
Language
Auto Source
Auto Power Off
On Screen
Menu Position
YPbPr
On
Off
On
Select item name “Background” and select the setting contents
ᮤ ᮣ
with the cursor (
) buttons.
Black........... Sets a black screen when there is no signal
Blue ............ Sets a blue screen when there is no signal
Disable
Background
Black
Download from Www.Somanuals.Eco-m5.7All Manuals Search And Download.
Setup
White Balance
This function automatically adjusts the black level and the
white level of the analog RGB input signal so that they suit
the personal computer. This serves to improve color repro-
ducibility.
Language
Auto Source
Auto Power Off
On Screen
On
Off
On
Menu Position
YPbPr
ᮣ
Disable
Black
1. Select item name “White Balance” and press the cursor (
button.
The display changes to the “Input Black Signal” display.
)
Background
White Balance
2. The background of the screen of the connected PC is set to
black.
ᮣ
3. Press the ( ) cursor button. The display changes to “Adjusting
Black” and the black level is adjusted.
Adjusting Black
Input Black Signal
4. The adjustment of the black level is completed and the display
changes to “Input White Signal”.
5. The background of the screen of the connected PC is set to
white.
ᮣ
6. Press the ( ) cursor button. The display changes to “Adjusting
White” and the white level is adjusted.
White Balance Complete
Input White Signal
Adjusting White
“White Balance Complete” is displayed for a while and the ad-
justment is completed.
Download from Www.Somanuals.Eco-m5.8All Manuals Search And Download.
Info.
G Select menu name “Info.”.
The item name display will differ depending on the input signal. See “List of Item Names Offering Input
Status
This displays information about the unit.
Status
Factory Default
ᮣ
Select item name “Status” and press the cursor ( ) button.
Lamp Timer Reset
Lamp Timer
12h
Display Contents:
Projector model, firmware version, and the internet
home page address of OLYMPUS CORPORATION.
VP Series
Version:7,0,0,0,0
Factory Default
This function returns the adjustments and settings of all the
input sources to the standard factory default values.
Status
Factory Default
Lamp Timer Reset
Lamp Timer
ᮣ
Select item name “Factory Default” and press the cursor ( ) but-
12h
ton.
The display “Press "ENTER" to Factory Default Set”
will appear.
Press "ENTER" to Factory Default Set
A press of the ENTER button sets the factory defaults.
Main unit operation: Press the
(AUTO) button.
Items that are not set to the factory default:
Projection method,YPbPr, Language, and LampTimer
Lamp Timer Reset
This function resets the lamp timer. Be sure to perform the
reset operation when the lamp cartridge has been replaced.
ᮣ
Select item name “Lamp Timer Reset” and press the cursor (
)
Status
button.
Factory Default
Lamp Timer Reset
Lamp Timer
12h
The display “Press "ENTER" to Lamp Timer Reset”
appears.
A press of the ENTER button resets the timer
Press "ENTER" to Lamp Timer Reset
Main unit operation: Press the
(AUTO) button.
Download from Www.Somanuals.Eco-m5.9All Manuals Search And Download.
Info.
Resolution / Frequency
This function displays the resolution and frequency of the
detected input signal.
Status
Factory Default
Lamp Timer Reset
Resolution
This information will not be displayed unless an analog RGB or
digital RGB signal is input and an Analog RGB or Digital RGB
input selection is made.
1024
ן 768 60Hz, 48kHz
12h
Frequency
Lamp Timer
Lamp Timer
This function displays the lamp timer.
When the lamp timer exceeds 1000 hours, “Replace the Lamp
Cartridge” is displayed on the screen for 10 seconds at one minute
intervals.
Status
Factory Default
Lamp Timer Reset
Resolution
Replace the lamp with a new one.
1024
ן 768 60Hz, 48kHz
12h
about lamp cartridge replacement.
Frequency
Lamp Timer
When 1100 hours is exceeded, “Warning!! System Shutdown” is
display for 10 seconds and the power is switched off.
Download from Www.Somanuals.Eco-m6.0All Manuals Search And Download.
When the STATUS Indicator is Lit/Blinks
STATUS indicator
POWER indicator
When the STATUS indicator of the main unit
operation panel is lit or blinks, notification
is being given of the irregularities de-
scribed.
STATUS
POW
ER
POWER
MENU
SOURCE
QUICK
MENU
AUTO
AUDIO
VIDEO
STATUS Indicator
POWER Indicator
Action to Take
The temperature has become abnormally high.
*
The thermal protector is activated.If the room tem-
perature is high, move the projector to a cool lo-
cation. If the internal temperature of the projector
is high, check the ventilation holes of the cooling
fan and clean them if they are obstructed.
When the thermal protector is activated, the power
is switched off and even if the power is soon
switched back on, the power might not actually
be supplied to the projector. Should this happen,
wait one minute and then switch the power on
again.
STATUS
POWER
*
Blinks red
Lit red
(0.5 s lit / 0.5 s off)
If the power still does not come on, wait approxi-
mately 60 minutes until the internal temperature
of the projector drops, then switch on the power
again.
When the aforementioned procedure does not
solve the problem, please contact Olympus Digi-
tal Technical Support.
The lamp will not light up.
STATUS
POWER
Wait one minute or longer while the lamp lighting volt-
age irregularity detection protector is activated and
switch the power on again. If the problem still per-
sists, unplug the power cable and contact Olympus
Digital Technical Support.
Blinks red
(1 s lit / 1 s off)
When the lamp burns out during operation: Blinks amber for 90 seconds and
then is lit amber
When the lamp does not light from the beginning: Lit amber
Download from Www.Somanuals.Eco-m6.1All Manuals Search And Download.
When the STATUS Indicator is Lit/Blinks
STATUS Indicator
POWER Indicator
Action to Take
The fan is stopped.
STATUS
POWER
Unplug the power cable and request service from
Olympus Digital Technical Support.
Blinks red
Lit amber
(0.5 s lit / 0.5 s off)
STATUS
The lamp cover is open.
The lamp cover is not attached properly.
Attach it properly.
POWER
Blinks red
Lit red
(1 s lit / 1 s off)
It is timer to replace the lamp.
The lamp timer has exceeded 1000 hours.
Replace the lamp cartridge.
STATUS
POWER
Lit red
When power is on:
Lit green
When power is off:
Lit amber
The lamp’s service life has ended.
The lamp timer has exceeded 1100 hours.The lamp
will not light. Replace the lamp cartridge.
STATUS
POWER
Lit red
Lit amber after 90 seconds
of blinking in amber
Download from Www.Somanuals.Eco-m6.2All Manuals Search And Download.
Troubleshooting
Check the following matters before requesting servicing.
Reference
Page
Problem
Check
* Has the power plug become disconnected from the
outlet?
No power
* Is the lamp cover properly attached?
* Has the internal temperature become high?When the
internal temperature becomes very high, to protect
the unit the power will not switch on.
* Has the lamp timer exceeded 1100 hours?The power
will no longer switch on once the timer has exceeded
1100 hours.
* Has the connected input been selected?
* Is the cable of the input connector properly connected?
* If there is connection to a personal computer, is a
signal being output from the personal computer?
* Has a signal that is higher than the supported fre-
quency of the projector been input?
No video
* Check that the image adjustment brightness and con-
trast are not set to minimum.
* Has the lamp burned out?
* Is the STATUS indicator blinking?
* When a monochrome video signal cannot be dis-
played properly, set the input selection to "YCbCr".
E-61
* Is the projector installed properly?
* Is the keystone adjustment properly adjusted?
Distorted video
Blurred video
* Is the lens properly focussed?
* Are the projection screen and the projector installed
at the proper distance?
* Has the projection distance exceeded the focussing
range?
* Is there condensation on the lens and other parts?
When the projector has been stored in a cold location
and the power is switched on in a warm location, there
may be condensation on the lens and other internal
optical parts. Should this occur, wait several minutes
until the condensation disappears.
–
* Is the input signal being supported for resolution and
frequency? Check the resolution of your personal com-
puter.
Image position is shifted
and doesn’t display prop-
erly
* When the image is broken in the horizontal or vertical
direction, or the image does not fill the entire screen,
select a suitable aspect ratio.
Image is broken
* When a component signal is being input, the color
space setting is different. Perform the color space
setting.
Overall color of image is
strange
Download from Www.Somanuals.Eco-m6.3All Manuals Search And Download.
Troubleshooting
Reference
Page
Problem
Check
* Other than for “Setup” and “Info.”, selection is not per-
mitted unless a signal is input to the projector and an
image or picture is projected.
Menu name cannot be se-
lected
–
* There will not be a display unless the personal com-
puter screen is being projected.
An image will not be output unless a video image is
being input.
Pressing the PIP button
does not display a sub-pic-
ture
* Has the transportation insulation sheet been re-
moved?
* Is an obstacle located between the remote control and
the remote control sensor of the main unit?
* Is the remote control out of range for its signal to reach
the sensor?
Remote control does not
function
–
–
* Is there strong light or a fluorescent lamp in the vicin-
ity of the sensor?
* Are the batteries weak? Try directing the remote con-
trol toward the remote control sensor from a close
distance and operating it.If there is difficulty in chang-
ing settings, the batteries are weak. Replace the but-
ton battery (CR2025) with new one.
STATUS indicator lights or
blinks
* See the STATUS indicator list.
–
Brightness is uneven
* When projecting a rather dark image, the brightness
may be uneven in different parts of the image.This is
not a malfunction.
If the problem is still not solved after checking the aforementioned matters, please contact Olympus
Digital Technical Support.
Download from Www.Somanuals.Eco-m6.4All Manuals Search And Download.
Cleaning
G Be certain to disconnect the power plug from the power outlet before cleaning.
G Do not spray or otherwise expose the projector, lens, or screen to volatile substances such as insecti-
cides. Do not leave rubber or vinyl products in contact with the projector for long periods. Doing so
could cause them to undergo qualitative changes or the coatings may peel, etc.
Cleaning a Soiled Projector Main Unit
* Wipe with a lint-free, soft, dry cloth.
When very dirty, wipe with a cloth that has been moistened with a diluted neutral detergent, then finish
with a dry cloth. If a chemically-treated cloth is going to be used, please follow any written warnings.
* Do not wipe with thinner, benzene, or other solvents.Doing so could cause them to undergo qualitative
changes or the coatings may peel, etc.
* When removing the dust of the outflow and intake holes, use the brush attachment on a vacuum
cleaner to clean out the dust. Avoid using the vacuum directly without attaching the adapter as well as
the use of a nozzle adapter.
* Do not scratch or otherwise hit the projector body with your nails or other hard object, since this will
cause scratches.
Dirty Lens
* Clean using the same method you would use to clean a camera lens: Use a commercial blower for
camera use or cleaning paper for eye glasses. Be careful not to scratch the lens at this time.
Dust of the Intake and Outflow Holes
Dust that collects in the intake and outflow holes will obstruct the ventilation and cause the internal
temperature to rise which could cause damage. Clean this area carefully. As a guideline, clean at least
every 100 hours of usage.
U
O
N
T
K
E
U
I C
A
M
U
Q
* Switch off the power, check that the
POWER indicator has changed to a
steadily lit amber, then unplug the
power cable.
S O U R C E
U
N
R
E
E
M
W
O
P
E R
P O W
S T A T U S
* Clean out the holes from the outside
using a vacuum cleaner. Use the
brush adapter of the vacuum cleaner
to do this. Avoid using the vacuum
directly without attaching the adapter
as well as the use of a nozzle adapter.
Cleaning the Inside of the Projector
Cleaning of the inside of the projector is required about once a year. Failure to clean over a long period
while dust has collected inside the projector could cause a fire or breakdown. Do not clean the inside of
the projector by yourself. Please be sure to contact Olympus Digital Technical Support.
Download from Www.Somanuals.Eco-m6.5All Manuals Search And Download.
Replacing the Lamp Cartridge
The lamp that is used as a light source in the projector has a limited service life.The rated service
life of the lamp is about 1000 hours.This could be shortened depending on conditions of use and
other factors.
When the lamp timer exceeds a usage time of 1000 hours, the STATUS indicator lights and the lamp
timer display appears on the screen.When usage time exceeds 1100 hours, the lamp will cease to light.
Should this occur, it is time to replace the lamp cartridge.
CAUTION
• To replace the lamp cartridge, first switch off the power, check that the POWER indicator has
changed to a steady amber, then unplug the power plug from the outlet and let the projector
stand for approximately 60 minutes before making the replacement.
Due to the high temperature, replacement of the lamp cartridge during operation or immedi-
ately after stopping the projector may cause burns.
• To prevent a dangerous situation, please perform the replacement work at a position that is
lower than the face.
In the event of the lamp cartridge bursting, working at a position that is above face level could
result in glass fragments or other substances entering the eyes or elsewhere causing injury.
• Do not remove screws other than the specified ones.
• The light source of the projector uses a mercury lamp having a high internal pressure (hereafter
referred to as a high-pressure mercury lamp or lamp). Please exercise due care in handling.
• When the usage time of the lamp exceeds 1000 hours, the STATUS indicator of the projector
lights.
Please promptly replace the lamp with a new one even if the lamp still lights normally.
• As a result of the deterioration of the high-pressure mercury lamp due to shocks, scratches,
and the passage of usage time, the lamps have characteristics such as not lighting and reach-
ing the end of their service life, and bursting with an associated loud noise.
• Do not touch the glass portion of the lamp cartridge with your bare hands. Doing so could
cause the lamp to burst or shorten the service life. The service life of the lamp may also vary
depending on the usage conditions and individual differences. Although infrequently, the lamp
may burst a little while after it was used.
• When the high-pressure mercury lamp bursts, glass fragments fly and scatter inside the lamp
house and outside of the projector, and the internal gas of the lamp can leak to the outside via
the ventilation holes of the projector.
Should the lamp burst, do not bring your face, hands, or other parts of your body close to the
projector. Promptly request a lamp replacement and internal inspection from Olympus Digital
Technical Support.
• The inside of the high-pressure mercury lamp contains substances that are harmful to the body
such as mercury and others substances. If your face, hands, or other parts of your body are
close to the projector when the lamp bursts and if the gas generated from the lamp is inhaled
or comes in contact with the body, please consult a doctor promptly.
• The lamps of projectors use the same harmful substances as fluorescent lamps and halogen
lamps (including mercury and halogen substances).
Please dispose of used lamps using the same classification method as typical fluorescent
lamps, etc.
Download from Www.Somanuals.Eco-m6.6All Manuals Search And Download.
Replacing the Lamp Cartridge
PREPARATION Turn the projector upside down and place it on a soft cloth that has
been prepared in advance to prevent scratches.This will assist in lamp
cartridge replacement. After replacement, return the projector to the
original condition.
Disconnect the power cable.
1.
Turn the projector upside down.
2.
Remove the lamp cover.
3.
(1) Turn the screw that fastens the lamp cover
counterclockwise until it turns freely.(The screw
will not come out.)
(2) Lift the lamp cover a little and pull it off in the
direction of the arrow.
4. Remove the lamp cartridge
(1) Turn the 2 screws that fasten the lamp cartridge (2) Grasp the handle of the lamp cartridge, pull it
counterclockwise until they turn freely. (The
screws will not come out.)
upward and remove the lamp cartridge.
Download from Www.Somanuals.Eco-m6.7All Manuals Search And Download.
Replacing the Lamp Cartridge
5. Install the new lamp cartridge
(1) Slowly push in the lamp cartridge with the (2) Turn the 2 screws of the lamp cartridge clock-
socket facing forward.(Align the lamp cartridge
screw with the screw hole of the projector.)
wise to tighten.
6. Install the lamp cover
(1) First insert the front edge of the lamp cover into (2) Turn the screw of the lamp cover clockwise to
the groove, then close the lamp cover.
tighten.
7. Reset the lamp timer to zero.
Plug in the power cable and switch on the power before resetting.
NOTE: The projector will no longer start when the lamp timer exceeds 1100 hours. As a result, it will not be
possible to reset the lamp timer through timer operations.
Should this situation arise, set to the standby condition and press the SOURCE button and the ASPECT button of
the main unit at the same time for at least 5 seconds.
When reset, the STATUS indicator will go off.
Please obtain a replacement lamp from Olympus Emporium. When ordering, please specify a VP-1 replacement
lamp type V-120 (Stock No. 205201).
Download from Www.Somanuals.Eco-m6.8All Manuals Search And Download.
Specifications
Optical
DMD
Single Chip Digital Micro Device (DMD)
1024
ן 768 pixels Lamp
120 W high-pressure mercury lamp
Projection lens
Image size
Manual zoom (
ן 1.2), Manual focus F = 2.6 – 2.9, f = 27.5 – 33.0 mm Minimum 26 inch (at projection distance of 1.20 m / 3.9 feet telephoto)
Maximum 200 inch (at projection distance of 7.86 m / 25.8 feet wide)
1000 lumens
Light Output
Contrast Ratio
2000:1 (Full on/off)
Electrical
Inputs
Video (NTSC3.58/NTSC4.43/PAL/PAL_N/PAL_M/PAL60/SECAM)
RGB (Horizontal :15 to 92 kHz, Vertical 50 to 120 Hz)
Full color (16,770,000 colors)
SXGA (Compression), XGA(True), SVGA/VGA (Expansion/True)
1.8 A
Color Reproduction
Resolution
Input Current
Power Requirement
Power Consumption
100 - 240 V AC, 50/60 Hz
180 watts
Mechanical
Dimensions Excluding Stand 18.0 cm (W)
ן 4.7 cm (H) ן 16.3 cm (D) 7.1 in.(W)
ן 1.9 in.(H) ן 6.4 in.(D) Weight
Approximately 1.1 kg / 2.4 lbs
Operational Temperatures
Regulations
Data projector: 5° to 35°C (41° to 95°F), 30 to 85% humidity
UL Approved (UL 1950, CSA 950)
Meets FCC Class A requirements
* Specifications and design are subject to change without notice.
Download from Www.Somanuals.Eco-m6.9All Manuals Search And Download.
Table of Supported Frequency
The unit automatically determines PC signals to select the appropriate resolution.
Some signals may require manual adjustments. See “Picture Adj./Fine Picture /H Position / V Position” on
Signal
Resolution
Frequency H. Refresh Rate Digital Analog
( kHz ) ( Hz )
31.5 70.1
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
VESA
640
ן 350 640
ן 350 720
ן 350 640
ן 400 640
ן 400 720
ן 400 720
ן 400 640
ן 480 640
ן 480 640
ן 480 640
ן 480 800
ן 600 800
ן 600 800
ן 600 800
ן 600 800
ן 600 1024
ן 768 1024
ן 768 1024
ן 768 1024
ן 768 1024
ן 768 1280
ן 1024 1280
ן 1024 1280
ן 1024 640
ן 400 640
ן 400 640
ן 480 640
ן 480 800
ן 600 800
ן 600 1120
ן 750 1024
ן 768 1024
ן 768 1280
ן 1024 640
ן 480 832
ן 624 1024
ן 768 1152
ן 870 1152
ן 900 1280
ן 1024 1024
ן 768 1152
ן 900 1280
ן 1024 1280
ן 1024 –
–
37.9
31.5
31.5
37.9
31.5
37.9
31.5
37.9
37.5
43.3
35.2
37.9
46.9
48.1
53.7
48.4
56.5
57.7
60.0
68.7
64.0
80.0
91.1
24.8
31.5
31.5
37.5
37.9
46.9
50.0
56.5
60.0
64.6
35.0
49.7
60.2
68.7
61.8
81.1
49.7
71.7
63.9
78.1
85.1
70.0
70.1
85.1
70.0
85.0
60.0
72.8
75.0
85.0
56.3
60.3
75.0
72.2
85.1
60.0
70.1
72.0
75.0
85.0
60.0
75.0
85.0
56.4
70.1
60.0
75.0
60.3
75.0
60.1
70.1
75.0
59.9
66.7
74.5
74.9
75.1
66.0
76.1
60.4
76.1
60.0
72.0
–
–
–
ࠗ
–
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
–
–
NEC(PC-9800)
–
–
–
–
–
–
–
–
–
–
ࠗ
ࠗ
ࠗ
Apple Macintosh
–
–
–
–
–
–
–
Sun
SGI
HP
ࠗ : Supported frequency
– : Not supported frequency
* Apple Macintosh’s ADC connector is not supported.
The native resolution of the panel is 1024
ן 768. Resolutions other than 1024ן 768 may be displayed with uneven size of text or lines.
Download from Www.Somanuals.Eco-m7.0All Manuals Search And Download.
Cabinet Dimensions
M E N U
Q U I C K
S O U R C E P O W E R
A U T O
M E N U
P O W E R
S T A T U S
180 (7.1)
Unit: mm (inch)
Download from Www.Somanuals.Eco-m7.1All Manuals Search And Download.
Technical Assistance :
Olympus Digital Technical Support
(800)798-2777 toll-free hotline
Mon. – Fri., 8 AM to 10 PM Eastern Time
E-mail : [email protected]
For supplies and accessories :
Olympus Emporium
(800)201-7766
VT818501
Download from Www.Somanuals.com. All Manuals Search And Download.
|