DIGITAL CAMERA
XZ-1
Instruction Manual
● Thank you for purchasing an Olympus digital camera. Before you start to use your new camera, please read these
instructions carefully to enjoy optimum performance and a longer service life. Keep this manual in a safe place for
future reference.
● We recommend that you take test shots to get accustomed to your camera before taking important photographs.
● In the interest of continually improving our products, Olympus reserves the right to update or modify information
contained in this manual.
● The screen and camera illustrations shown in this manual were produced during the development stages and may
differDfroomwtnheloaactduaflrpormoduWct.ww.Somanuals.com. All Manuals Search And Download.
Camera Settings
Using the Direct Buttons
Frequently used functions can be accessed using the direct buttons.
Zoom lever (p. 22, 26)
Shutter button (p. 21)
R button (record movies) (p. 21)
qbutton (switch between shooting and
playback) (p. 21, 23)
m button (p. 6)
INFO button (change information display)
(p. 23, 26, 36, 38, 40, 44)
Mode dial
Use the mode dial to select the shooting mode.
A
P
iAUTO (p. 28)
Program Auto (p. 20)
Aperture Priority (p. 29)
Shutter Priority (p. 29)
Manual Shooting (p. 30)
Custom Mode Setup (p. 30)
Low Light (p. 30)
A
S
M
Indicator
C
h
SCN Scene Mode (p. 31)
ART Art Filter (p. 34)
EN
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Wheel controller
F (up) /
F (exposure compensation) button (p.
)
38
G (down) /
jY(sequential shooting/Self-timer) button (p. 38) /
D button (erase) (p. 25)
H (left) /
&(macro) button (p. 36) /
P (AF target) button (p.
)
37
I (right) /
A button
(p. 4, 5)
#(flash) button (p. 37)
Operation guide
Operation guides displayed at the bottom of the screen
indicate that the m button, A button, or zoom
lever should be used.
The symbols FGHI displayed for image selections
and settings indicate that the wheel controller (see
above) is to be used.
Camera Menu
Reset Photo Mode
1/2
X
Picture Mode
WB
Natural
Auto
Y
M
D
Time
XWSettings
Flash Settings
Bracket Settings
Digital Zoom
Image Stabilizer
4/30
10
2011 . 02 . 26
12㧦30
Y/M/D
Off
On
4/30
Exit
Set
Cancel
Set
100-0004
’11/02/26 12:30
Set
4
Print
More
Single Print
Erase/Cancel
Operation guide
4
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Live Control
To display the live control, press A during shooting. The live control can be used to adjust shooting functions
while previewing their effects in the monitor.
The live control is not displayed in A mode.
See “Menus for Shooting Functions” (p. 7) for a list of the functions that can be adjusted.
Functions
Options
Live control display
Cursor
1
2
Press A to display the live control.
Name of currently
selected item
Use FG to select a function and HI to
highlight options, then press A to choose
the highlighted option.
● The highlighted option takes effect when A is
pressed or if no operations are performed for
a short time.
Some menu items may not be available at certain
combinations of settings or in some shooting
modes.
Cursor
EN
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Menus
The menus can be used to adjust a variety of settings.
Press the m button during shooting or playback to display the menus. The menus provide access to a variety
of shooting and playback functions as well as to other camera settings, including display options and the time and
date.
1
Press the m button.
● The menus are displayed.
3
Use FG to select the desired option in
submenu 1 and then press A.
Submenu 2
Camera Menu
Reset Photo Mode
Picture Mode
WB
XWSettings
Flash Settings
Bracket Settings
Digital Zoom
Image Stabilizer
1/2
Natural
Setup Menu
2/2
Setup Menu
2/2
Auto
s
s
TV Out
Sleep
W
TV Out
Sleep
W
3 min
English
--.--.-- --:--
20 sec
1 min
3 min
5 min
Off
On
X
X
World Time
World Time
Exit
Set
Exit
Set
Back
Set
2
Press H to highlight the page tabs. Use
FG to select the desired page tab and
press I.
4
Use FG to select the desired option in
submenu 2 and then press A.
● Once a setting is selected, the display returns to
Page tab
Submenu 1
the previous screen.
Setup Menu
1/2
Setup Menu
1/2
Custom Mode Setup
Format
Backup
Custom Mode Setup
Format
Backup
USB Connection
There may be additional operations.
“Menu Settings” (p. 45 to 63)
USB Connection
Storage
Yes
Storage
Yes
q
q
Power On
Power On
Setup Menu
2/2
Sound Settings
File Name
Pixel Mapping
Sound Settings
File Name
Pixel Mapping
s
Reset
Reset
Set
TV Out
Sleep
W
1 min
English
Exit
Set
Exit
X
--.--.-- --:--
World Time
Exit
Set
5
Press the m button to complete the
setting.
6
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Index
Menus for Shooting Functions
ISO .........................................p. 39
Flash.......................................p. 37
Flash compensation ...............p. 43
Metering..................................p. 43
ND filter...................................p. 44
AF mode.................................p. 36
Face priority............................p. 44
Picture mode .........................p. 39
White balance.........................p. 40
Sequential shooting/
Self-timer ................................p. 38
Aspect ratio.............................p. 41
Image size (still images).........p. 41
Frame size (movies)...............p. 42
Live control
Reset Photo Mode..................p. 45
Picture Mode ..........................p. 45
WB..........................................p. 46
X W Settings..........................p. 47
Flash Settings.........................p. 48
Bracket Settings .....................p. 48
Digital Zoom ...........................p. 49
Image Stabilizer......................p. 49
1 (conversion lens) ...............p. 49
AF Illuminat. ...........................p. 50
Rec View ................................p. 50
Info Off....................................p. 50
Panorama...............................p. 51
Camera Menu
1/2
Reset Photo Mode
Picture Mode
WB
Natural
Auto
XWSettings
Flash Settings
Bracket Settings
Digital Zoom
Image Stabilizer
Off
On
Exit
Set
Camera menu
Movie Resolution....................p. 51
Movie Menu
1/1
HD
Movie Resolution
R
R (movies)..............................p. 51
On
Exit
Set
Movie menu
EN
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Menus for Playback, Editing, and Printing Functions
Slideshow...............................p. 52
Edit ...................................p. 52, 54
Print Order..............................p. 55
Erase......................................p. 55
? (Protect)..............................p. 56
Rotate.....................................p. 56
Playback Menu
Slideshow
Edit
Print Order
Erase
?
1/1
Rotate
Exit
Set
Playback menu
Menus for Other Camera Settings
Custom Mode Setup...............p. 57
Pixel Mapping.........................p. 59
s (Monitor) ..........................p. 59
TV Out ....................................p. 60
Sleep ......................................p. 62
W (Language)......................p. 62
X (Date/time).........................p. 62
World Time .............................p. 63
Setup Menu
Custom Mode Setup
Format
1/2
Memory Format/Format..........p. 57
Backup....................................p. 57
USB Connection.....................p. 58
qPower On .........................p. 58
Sound Settings.......................p. 58
File Name ...............................p. 59
Backup
USB Connection
Power On
Sound Settings
File Name
Pixel Mapping
Storage
Yes
q
Reset
Exit
Set
Setup menu
8
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Names of PParts
Camera unit
1
5
1
2
6
7
10
11
3
4
8
9
1 Strap eyelet...................................................p. 13
2 Connector cover ...................p. 15, 17, 60, 61, 64
3 Multi-connector...........................p. 15, 17, 60, 64
4 HDMI micro connector..................................p. 61
5 Self-timer lamp..............................................p. 38
AF illuminator................................................p. 50
6 Lens........................................................p. 76, 91
7 Control ring.......................................p. 27, 29, 30
8 Tripod socket
The Control Ring
Rotate the control ring to adjust
settings during shooting.
Shooting mode
Affected setting
ISO sensitivity
P / h
A / M
S
9 Speaker
Aperture
10 Battery/card compartment lock.....................p. 13
11 Battery/card compartment cover...................p. 13
Shutter speed
SCN
ART
C
Scene mode
Art filter mode
Same as original shooting mode
EN
9
Download from Www.Somanuals.com. All Manuals Search And Download.
7
8
1
9
2
3
10
11
4
5
12
13
14
6
15
16
17
1 Flash.................................................p. 37, 43, 48
2 Hot shoe .......................................................p. 80
3 Hot shoe cover
4 Flash switch..................................................p. 37
5 Accessory port........................................p. 80, 81
6 Monitor..............................................p. 20, 59, 71
14 Wheel controller..............................................p. 4
F (exposure compensation) button..........p. 38
jY(sequential shooting/Self-timer)
button ........................................................p. 38
D button (erase) .......................................p. 25
&(macro) button......................................p. 36
P (AF target) button...............................p. 37
#(flash) button.........................................p. 37
15 A button (OK)............................................p. 4, 5
16 INFO button (change information display)
......................................p. 23, 26, 36, 38, 40, 44
17 m button...................................................p. 6
7
n button........................................p. 18, 20
Indicator lamp...................................p. 14, 15, 17
8 Zoom lever..............................................p. 22, 26
9 Mode dial........................................................p. 3
10 Shutter button...............................................p. 21
11 Microphone.............................................p. 51, 54
12 R button (record movies).............................p. 21
13 qbutton (switch between shooting and
playback) ................................................p. 21, 23
10 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Monitor
Shooting mode display
1 2 3 4 5 6
7
8
RC
ON
ISO
29
28
27
26
25
24
AUTO
9
-
2.0
h
10
11
12
13
14
15
16
WB
AUTO
OFF
4:3
AF
L
N
HD
01:02:03
1
P
23
1/100 F5.0 +2.0
22
21 20
19 18 17
1 Battery check................................................p. 18
2 Writing data to card.......................................p. 78
3 Image stabilization........................................p. 49
4 Flash (RC) ....................................................p. 80
5 Conversion lens......................................p. 49, 81
6 World time.....................................................p. 63
7 AF target mark........................................p. 21, 37
8 Histogram .....................................................p. 23
9 ISO................................................................p. 39
10 Picture mode ................................................p. 39
11 White balance...............................................p. 40
12 Sequential shooting/Self-timer......................p. 38
BKT...............................................................p. 48
13 Aspect ratio...................................................p. 41
14 Image size (still images)...............................p. 41
15 Frame size (movies) .....................................p. 42
16 Continuous recording length (movies)..........p. 79
17 Number of storable pictures (still images)
..............................................................p. 20, 79
18 Current memory............................................p. 78
19 Top: Flash compensation indicator...............p. 43
Bottom: Exposure compensation indicator...p. 38
20 Exposure compensation...............................p. 38
21 Aperture value ..................................p. 21, 29, 30
22 Shutter speed ...................................p. 21, 29, 30
23 Shooting mode..........................................p. 3, 28
24 Face priority..................................................p. 44
25 AF mode.......................................................p. 36
26 ND filter.........................................................p. 44
27 Metering........................................................p. 43
28 Flash compensation......................................p. 43
29 Flash.............................................................p. 37
Flash standby/flash charge...........................p. 71
EN 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback mode display
Normal display
Detailed display
1
2
345
6
1
2
345
6
4/30
4/30
10
10
R
G
B
7
20
19
18
17
16
15
P
1/100 F1.8 +2.0 ISO400
8
WB
:
4 3
L
N
-2.0 AUTO A
±
0 G
±
0
9
NATURAL
100-0004
’11/02/26 12:30
10
11
’11/02/26 12:30
11
14 13 12
1 Battery check................................................p. 18
2 Print reservation/number of prints........p. 68/p. 66
3 Adding sound..........................................p. 51, 54
4 Protect ..........................................................p. 56
5 Current memory............................................p. 78
6 Frame number/total number of images (still
images).........................................................p. 23
Elapsed time/total recording time (movies)...p. 24
7 Histogram .....................................................p. 23
8 ISO................................................................p. 39
9 White balance...............................................p. 40
White balance compensation........................p. 47
10 File number
11 Date and time ...............................................p. 18
12 Flash compensation......................................p. 43
13 Metering........................................................p. 43
14 Aspect ratio...................................................p. 41
15 Picture mode.................................................p. 39
16 Image size (still images)...............................p. 41
Frame size (movies) .....................................p. 42
17 Shooting mode................................................p. 3
18 Shutter speed ...................................p. 21, 29, 30
19 Aperture value ..................................p. 21, 29, 30
20 Exposure compensation...............................p. 38
12 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparing thee Camera
Attaching the camera strap and lens
cap
Pull the strap tight so that it does not come loose.
Inserting the battery and the SD/SDHC/
SDXC memory card (sold separately)
1
2
Use only SD, SDHC, or SDXC memory cards with
this camera. Do not insert any other types of memory
card.
2
1
3
1
Battery/card
Battery/card
compartment cover
compartment lock
2
4
5
Battery lock
knob
● Repeat for the second
eyelet.
Write-protect switch
EN 13
Download from Www.Somanuals.com. All Manuals Search And Download.
To remove the SD/SDHC/SDXC memory
card
Insert the battery as shown, with the B terminal
toward the battery lock knob. Damage to the battery
exterior (scratches, etc.) may produce heat or an
explosion.
1
2
Insert the battery while sliding the battery lock knob in
the direction of the arrow.
Slide the battery lock knob in the direction of the
arrow to unlock, and then remove the battery.
Turn off the camera before opening the battery/card
compartment cover.
Press the card in until it clicks and comes out slightly,
then grab the card and pull it out.
When using the camera, be sure to close the battery/
card compartment cover.
Insert the card straight until it clicks into place.
Do not touch the card contact area directly.
Charging the battery and setting up
using the supplied CD
3
Connect the camera to the computer to charge the battery
and use the supplied CD for setup.
User registration using the supplied CD and
installation of [ib] computer software is available on
Windows computers only.
This camera allows the user to take pictures using
the internal memory even when no SD/SDHC/SDXC
memory card (sold separately) is inserted.
The camera battery can be charged while the camera is
connected to a computer.
● The indicator lamp lights during charging and turns
off when charging is complete.
“Using an SD/SDHC/SDXC memory card” (p. 77)
“Number of storable pictures (still images)/Continuous
recording length (movies) in the internal memory and
SD/SDHC/SDXC memory cards” (p. 79)
Charging takes up to 3 hours.
If the indicator lamp does not light, the camera is not
correctly connected or the battery, camera, computer,
or USB cable may not be functioning as expected.
We recommend that you use a computer equipped
with Windows XP (Service Pack 2 or later), Windows
Vista, or Windows 7. See “Charging the battery with
the supplied USB-AC adapter” (p. 17) if you are using
a different computer or wish to charge the battery
without using a computer.
14 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Windows
Connecting the camera
Indicator lamp
Insert the supplied CD in a CD-ROM drive.
1
Windows XP
● A “Setup” dialog will be displayed.
Connector cover
Windows Vista/Windows 7
● An Autorun dialog will be displayed. Click
“OLYMPUS Setup” to display the “Setup” dialog.
Multi-connector
USB cable (supplied)
Computer (on and running)
Register your Olympus product.
● Click the “Registration” button and follow the on-
screen instructions.
If the “Setup” dialog is not displayed, select “My
Computer” (Windows XP) or “Computer” (Windows
Vista/Windows 7) from the start menu. Double-click
the CD-ROM (OLYMPUS Setup) icon to open the
“OLYMPUS Setup” window and then double-click
“Launcher.exe”.
3
If a “User Account Control” dialog is displayed, click
“Yes” or “Continue”.
Follow the on-screen instructions on your
computer.
2
If nothing is displayed on the camera screen even
after connecting the camera to the computer, the
battery may be exhausted. Leave the camera
connected to the computer until the battery has
charged, then disconnect and reconnect the camera.
EN 15
Download from Www.Somanuals.com. All Manuals Search And Download.
Install OLYMPUS Viewer 2 and [ib] computer
software.
● Check the system requirements before beginning
Install the camera manual.
● Click the “Camera Instruction Manual” button and
follow the on-screen instructions.
4
5
installation.
Macintosh
● Click the “OLYMPUS Viewer 2” or “OLYMPUS ib”
button and follow the on-screen instructions to
install the software.
Insert the supplied CD in a CD-ROM drive.
● Double-click the CD (OLYMPUS Setup) icon on
the desktop.
1
OLYMPUS Viewer 2
Operating
System
Windows XP (Service Pack 2 or later)/
Windows Vista/Windows 7
● Double-click the “Setup” icon to display the “Setup”
dialog.
Processor
Pentium 4 1.3 GHz or better
1 GB or more (2 GB or more
recommended)
RAM
Free Hard
Drive Space
1 GB or more
1024 × 768 pixels or more
Minimum 65,536 colors
(16,770,000 colors recommended)
Monitor
Settings
[ib]
Operating
System
Windows XP (Service Pack 2 or later)/
Windows Vista/Windows 7
Pentium 4 1.3 GHz or better
(Pentium D 3.0 GHz or better required
for movies)
Processor
512 MB or more (1 GB or more
recommended)
(1 GB or more required for movies—2 GB
or more recommended)
RAM
Free Hard
Drive Space
1 GB or more
1024 × 768 pixels or more
Minimum 65,536 colors (16,770,000
colors recommended)
Monitor
Settings
A minimum of 64 MB video RAM with
DirectX 9 or later.
Graphics
*
See online help for information on using the software.
16 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Example: USB-AC adapter with an AC
cable
Install OLYMPUS Viewer 2.
● Check the system requirements before beginning
installation.
2
1
● Click the “OLYMPUS Viewer 2” button and follow
the on-screen instructions to install the software.
Connector cover
OLYMPUS Viewer 2
2
Operating
System
Mac OS X v10.4.11–v10.6
Processor
Intel Core Solo/Duo 1.5 GHz or better
1 GB or more (2 GB or more
recommended)
Multi-connector
RAM
Free Hard
Drive Space
USB cable (supplied)
1 GB or more
1024 × 768 pixels or more
Minimum 32,000 colors (16,770,000
colors recommended)
Monitor
Settings
*
Other languages can be selected from the language
combo box. For information on using the software, see
online help.
1
Copy the camera manual.
3
3
● Click the “Camera Instruction Manual” button to
open the folder containing the camera manuals.
Copy the manual for your language to the
computer.
AC outlet
Charging the battery with the supplied
USB-AC adapter
Indicator lamp
On: Charging
Off: Charged
2
The included F-2AC USB-AC adapter (with an AC
cable or plug-in type; hereafter referred to as USB-AC
adapter) differs depending on the region where you
purchased the camera. If you received a plug-in type
USB-AC adapter, plug it directly into an AC outlet.
The supplied USB-AC adapter is for charging and
playback only. Do not take pictures while the USB-AC
adapter is connected.
EN 17
Download from Www.Somanuals.com. All Manuals Search And Download.
The battery is not fully charged at the time of
purchase. Before use, be sure to charge the battery
until the indicator lamp turns off (up to 3 hours).
Date, time, time zone, and language
The date and time set here are saved to image file names,
date prints, and other data. You can also choose the
language for the menus and messages displayed in the
monitor.
If the indicator lamp does not light, the camera is not
correctly connected or the battery, camera, or USB-
AC adapter may not be functioning as expected.
For details on the battery and the USB-AC adapter,
see “The battery and USB-AC adapter” (p. 76).
Press the n button to turn on the
camera.
● The date and time setting screen is displayed when
the date and time are not set.
1
The battery can be charged while the camera is
connected to the computer. Charging time varies
depending on the performance of a computer. (There
may be cases in which it takes approx. 10 hours.)
X
When to charge the batteries
Charge the battery when the error message shown below
appears.
Y
M
D
Time
---- . -- . --
--㧦--
Y/M/D
Flashes in red
Cancel
Date and time setting screen
-
2.0
Use FG to select the year for [Y].
2
OFF
AF
Battery Empty
X
P
1/100
Y
M
D
Time
Monitor top left
Error message
2011 . -- . --
--㧦--
Y/M/D
Cancel
18 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Press I to save the setting for [Y].
3
X
Y
M
D
Time
2011 . -- . --
--㧦--
Y/M/D
Cancel
As in Steps 2 and 3, use FGHI to set
[M] (month), [D] (day), [Time] (hours and
minutes), and [Y/M/D] (date order).
4
5
For a more accurate setting, press A when the time
signal hits 00 seconds while setting the minutes.
The menus can be used to change the selected date
and time. [X] (Date/time) (p. 62)
Use HI to select your home time zone and
press A.
● Use FG to turn daylight saving time ([Summer])
on or off.
Seoul
Tokyo
Set
The menus can be used to change the selected time
zone. [World Time] (p. 63)
Use FGHI to select your language and
press A.
6
The language can be changed from the menus.
[W] (Language) (p. 62)
EN 19
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting, Viewing, aand Eraasing
Shooting with the optimum aperture
Hold the camera and compose the shot.
3
value and shutter speed
[Program Auto]
Monitor
In this mode, automatic shooting settings are activated
while also allowing changes to a wide range of
other shooting menu functions, such as exposure
compensation, white balance, etc. as needed.
Horizontal grip
Remove the lens cap.
1
2
Rotate the mode dial to P and press the
n button to turn on the camera.
Number of storable still pictures (p. 79)
ON
ISO
AUTO
-
2.0
h
WB
AUTO
Vertical grip
OFF
4:3
AF
L
N
When holding the camera, take care not to cover the
flash with your fingers, etc.
HD
01:02:03
1
[Program Auto]
indicator
P
1/100 F5.0 +2.0
Monitor (standby mode screen)
Press the n button again to turn off the camera.
20 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting movies
Press the shutter button halfway down to
focus on the subject.
● When the camera focuses on the subject, the
exposure is locked (shutter speed and aperture
value are displayed), and the AF target mark
changes to green.
4
Press the R button to start recording.
1
Recording time
● The camera was unable to focus if the AF target
mark flashes red. Try focusing again.
AF target mark
P
REC
2:18
Lights red during recording
Press halfway
The shooting mode selected for still photography
applies to movies (some shooting modes have no
effect).
P
1/100 F5.0
Shutter speed Aperture value
“Focusing” (p. 73)
The camera may not correctly display the recording
time in [Art Filter] mode (p. 34). Movies recorded in
[n] (Diorama) mode play back at high speed; during
recording, the recording time is adjusted to reflect the
playback time and advances more slowly than usual.
To take the picture, gently press the shutter
button all the way down while being careful
not to shake the camera.
5
Press the R button again to end recording.
2
Sound will also be recorded.
Press fully
P
1/100 F5.0
Image review screen
To view images during shooting
Pressing the qbutton enables playback of images. To
return to shooting, either press the qbutton or press the
shutter button halfway down.
EN 21
Download from Www.Somanuals.com. All Manuals Search And Download.
[Off] selected for [Digital Zoom]:
Image size Zoom bar
Using zoom
Use the zoom lever to frame the subject.
Zoom out (W)
Zoom in (T)
3648×2736
Optical zoom range
Other
Image zoomed and cropped.*1
Zoom bar
[On] selected for [Digital Zoom]:
Image size Zoom bar
ON
ON
ISO
ISO
AUTO
AUTO
-
2.0
-
h
2.0
h
WB
WB
AUTO
AUTO
OFF
OFF
4:3
4:3
AF
AF
3648×2736
L
N
L
N
HD
HD
Digital zoom range
01:02:03
1
01:02:03
1
P
1/100 F5.0 +2.0
P
1/100 F5.0 +2.0
Optical zoom: 4×
Digital zoom: 4×
Image zoomed and
cropped.*1
Other
To take larger images [Digital Zoom]
Digital zoom range
The type and amount of zoom can be identified from
the appearance of the zoom bar. The display differs
depending on the options selected for [Digital Zoom]
(p. 49) and image size (p. 41).
*1
If an image size is less than the full resolution after
reaching the maximum optical zoom, the camera will
automatically resize and crop the image to the selected
image size and enter the digital zoom range if [Digital
Zoom] is [On].
Photographs taken with the zoom bar displayed in
red may appear “grainy.”
22 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the shooting information
display
Viewing images
Press the q button.
1
The display of the screen information can be changed to
best match the situation, for example, the need for a clear
view of the screen or for making a precise composition by
using the grid display.
Number of frames/Total number of images
4/30
Press the INFO button.
1
● The displayed shooting information changes in
the order shown below each time the button is
pressed. “Shooting mode display” (p. 11)
Normal
ON
’11/02/26 12:30
ISO
AUTO
-
2.0
i
Playback image
WB
AUTO
OFF
4:3
AF
No information
L
N
Use the wheel controller to select an image.
● You can also use HI.
2
HD
01:02:03
1
P
1/1000 F5.0 ±0.0
View previous
image
View next
image
Detailed
ON
ISO
AUTO
-
2.0
i
WB
AUTO
OFF
4:3
AF
Keep rotating the wheel controller to scroll rapidly
forward or backward through images. You can also
keep HI pressed.
L
N
HD
01:02:03
1
P
1/1000 F5.0 ±0.0
The display size of the images can be changed.
“Index view and close-up view” (p. 26)
Reading a histogram
If the peak is too far toward this part of the
frame, photos will be mostly too bright.
If the peak is too far toward
this part of the frame, photos
will be mostly too dark.
The green area shows the
distribution of brightness at the
center of the frame.
EN 23
Download from Www.Somanuals.com. All Manuals Search And Download.
To play sound recordings
Operations during movie playback
To play sound recorded with an image, select the image
and press A. A H icon appears on images with which
sound has been recorded.
[R] (still images) (p. 54)
Elapsed time/
00:12/00:34
Total recording time
During playback
Pausing and
resuming
playback
Press A to pause playback. To
resume playback during pause, fast
forward, or rewind, press A.
00:12/00:34
During audio playback
Press I to fast forward. Press I
again to increase the fast forward
speed.
Fast forward
Rewind
To play back movies
Select a movie and press A.
Press H to rewind. The rewinding
speed increases each time H is
pressed.
4/30
Adjusting the
volume
Use the wheel controller or FG to
adjust the volume.
’11/02/26 12:30
Movie Play
Movie
24 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Operations during pausing playback
Erasing images during playback
(Single image erase)
Display the image you want to erase and
press G (D).
1
Erase
00:14/00:34
During pause
Yes
No
Press F to display the first frame
and press G to display the last
Cueing
frame.
Cancel
Set
• Using the wheel controller
Rotate the wheel controller to
advance or rewind a frame at
a time. Keep turning the wheel
controller for continuous advance
or rewind.
Use FG to highlight [Yes] and press A.
2
[All Erase] (p. 55) and [Sel. Image] (p. 55) can be
used to erase multiple images at the same time.
Advancing and
rewinding one
frame at a time
• Using HI
Press I or H to advance or
rewind one frame at a time. Keep
I or H pressed for continuous
advance or rewind.
Resuming
playback
Press A to resume playback.
To stop moviee playback
Press the m button.
EN 25
Download from Www.Somanuals.com. All Manuals Search And Download.
To scroll an image in close-up view
Use FGHI to move the viewing area.
Index view and close-up view
Index view enables quick selection of a desired image.
Close-up view (up to 10× magnification) allows checking
of image details.
Changing the image information
display
Rotate the zoom lever.
1
Shooting information settings displayed on the screen can
be changed.
Press the INFO button.
1
● The displayed image information changes in
the order shown below each time the button is
pressed.
Zoom out (W)
Zoom in (T)
Single-image view
Close-up view
Normal
4/30
10
4/30
W
T
4/30
No information
’11/02/26 12:30
’11/02/26 12:30
’11/02/26 12:30
W
T
Detailed
Index view
4/30
10
R
2
G
B
4
P
1/1000 F5.0 ±0.0 ISO200
WB
AUTO
:
L
N
4
3
-2.0
A
±
0
G±0
2
NATURAL
100-0004
’11/02/26 12:30
’11/02/26 12:30
“Reading a histogram” (p. 23)
To select an image in index view
Use FGHI to select an image, and press A to
display the selected image in single-image view.
26 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing a series of images
Viewing panoramas
Only the first image in each series shot with the following
functions is displayed.
You can pan across panoramas created using [Auto] or
[Manual].
[Sequential], [High-Speed1], [High-Speed2]
“Creating panoramic images ([~ Panorama])” (p. 32)
Display the first image in the series.
1
Display a panorama image during playback.
1
“Viewing images” (p. 23)
“Viewing images” (p. 23)
1/10
’11/02/26 12:30
First image in series
Press A.
2
Automatiic playback
Press A to start automatic playback of all the images in
the current series.
Index view
Use the control ring to switch between index and normal
views.
1/10
Current viewing area
Controls for panorama playback
Zoom in/zoom out: Press A to pause playback, then
use the zoom lever to zoom in and out.
’11/02/26 12:30
’11/02/26 12:30
Changes to [? (Protect)] (p. 56), [Rotate] (p. 56),
[Print Order] (p. 55) and [Erase] (p. 55) made when
the first frame is displayed apply to all images in
the series. Select index view to apply changes to
individual frames.
Pan direction: Press FGHI to pause playback and
pan the image in the selected direction.
Pause: Press A.
Resume: Press A.
End playback: Press the m button.
EN 27
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Shootinng Modes
To change the shooting mode
Using the live guide
The live guide can be used to change settings in A
mode.
The shooting mode (A, P, A, S, M, C, h, SCN,
ART) can be selected using the mode dial.
“Mode dial” (p. 3)
Guide items
The default settings of the function are highlighted in
.
• Change Color Saturation
• Change Color Image
• Change Brightness
• Blur Background
Shooting with automatic settings
• Shooting Tips
(
A
iAUTO)
1 Press A to display the live guide.
2 Use FG to highlight an item and press A.
According to the scene, the camera automatically selects
the optimal shooting mode from [Portrait]/[Landscape]/
[Night+Portrait]/[Sport]/[Macro]/[Low Light]. This is a fully
automatic mode that allows the user to take pictures using
the best mode for the shooting scene simply by pressing
the shutter button.
Guide item
Change Color Saturation
Rotate the mode dial to A.
1
ON
h
4:3
L
N
HD
3 Use FG to choose a level and check the effect or
description.
The icon changes
depending on the
scene that the camera
automatically selects.
● Press the shutter button halfway to select.
01:02:03
1
1/100 F5.0
Level bar
In some cases, the camera may not select the
desired shooting mode.
Clear & Vivid
When the camera cannot identify which is the optimal
mode, [Program Auto] will be selected.
There are some limitations on settings in A mode.
Flat & Muted
Cancel
28 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Press the shutter button to take a picture.
Choosing shutter speed
(S Shutter Priority)
● To clear the live guide from the display, press the
m button.
In mode S, you choose the shutter speed and let
the camera automatically adjust aperture for optimal
exposure.
YN+RAW is automatically selected when a RAW
option is chosen using the live guide.
Live guide settings are not applied to RAW images.
Rotate the mode dial to S.
Pictures may appear grainy at some live guide setting
levels.
1
2
Use the control ring to choose the shutter
speed.
Changes to live guide setting levels may not be
visible in the monitor.
Shutter speed
The flash can not be used with the live guide.
Changes to live guide options cancel previous
changes.
ON
ISO
AUTO
-
2.0
h
Choosing live guide settings that exceed the limits of
the camera exposure meters may result in pictures
that are over- or under-exposed.
WB
AUTO
OFF
4:3
AF
L
N
1/100
1/80
1/125
HD
Choosing aperture
(A Aperture Priority)
01:02:03
1
S
1/100 F5.0 +2.0
If the picture is over- or under-exposed, the shutter
speed is displayed in red.
In mode A, you choose the aperture and let the camera
automatically adjust shutter speed for optimal exposure.
Rotate the mode dial to A.
1
2
Use the control ring to choose the aperture.
Aperture value
ON
ISO
AUTO
-
2.0
h
WB
AUTO
OFF
4:3
AF
L
N
F5.0
1/100 F5.0 +2.0
4.5
5.6
HD
01:02:03
1
A
If the picture is over- or under-exposed, the aperture
is displayed in red.
EN 29
Download from Www.Somanuals.com. All Manuals Search And Download.
Choosing aperture and shutter speed
(M Manual Shooting)
Recalling saved settings
(C Custom Mode Setup)
In mode M, you choose both the aperture and the shutter
speed. At a speed of BULB, the shutter remains open
while the shutter button is pressed.
Mode C is used to take pictures using custom settings
saved using the [Custom Mode Setup] (p. 57) option in
the setup menu.
Rotate the mode dial to M.
Rotate the mode dial to C.
1
2
1
Exposure compensation is not available in C mode.
Use the control ring to choose the aperture.
Aperture value
Taking pictures under low light
ON
(
h
Low Light)
h
WB
-
2.0
Use h (low light) mode to take pictures under low light
AUTO
without a tripod.
4:3
OFF
L
N
AF
M
Rotate the mode dial to h.
1
HD
F5.0
1/100 F5.0 +2.0
4.5
5.6
01:02:03
1
Press F and use the wheel controller to
choose the shutter speed, and then press A.
● The shutter speed can be set to 1/2000–60 sec.
3
or [BULB].
ON
h
WB
-
2.0
AUTO
4:3
OFF
L
N
AF
HD
01:02:03
1
M
1/100 F5.0 +2.0
Shutter speed
Exposure compensation is not available in M mode.
If the picture is over- or under-exposed, the aperture
or shutter speed is displayed in red.
30 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the best mode for the shooting
scene (SCN Scene Mode)
Option
Application
ae-Portrait/BPortrait/
FLandscape/GNight Scene*1
MNight+Portrait/CSport/
NIndoor/RSelf Portrait/
/
Rotate the mode dial to SCN.
The camera takes
a picture using the
optimum settings
for the scene
1
SSunset*1/XFireworks*1
/
0Multi. Exposure/VCuisine/
dDocuments/KBeach & Snow/
bUnderwater Wide/
conditions.
cUnderwater Macro/Pet/
~Panorama
*1
When the subject is dark, noise reduction is
automatically activated. This approximately doubles the
shooting time during which no other pictures can be
taken.
Use FG to select the best shooting mode
for the scene, and press A.
2
[e-Portrait] can not be applied to RAW images.
When RAW or RAW+JPEG photos are taken using
[e-Portrait], two images will be recorded: a RAW
image and an X-quality (2560×1920) JPEG to which
effects have been applied.
ON
ISO
AUTO
-
2.0
h
WB
AUTO
OFF
When JPEG is set in [e-Portrait], two images are
saved, one from before application of the effect
(with set picture quality) and the other from after
application of the effect (X (2560×1920)).
4:3
AF
L
N
HD
01:02:03
1
1/100 F5.0 +2.0
Icon indicating [Scene Mode] that
is set
Taking a multiple exposure
([0 Multi. Exposure] mode)
1 Use FG to highlight [0 Multi. Exposure] and press
In [Scene Mode], the optimum shooting settings are
pre-programmed for specific shooting scenes. For
this reason, some settings cannot be changed in
some modes.
A.
2 Press the shutter button to take the first exposure.
● The first exposure is displayed in the background.
To retake the first exposure, press the m button
and then press the shutter button again.
3 Frame the next exposure against the background of
the first and press the shutter button.
● This creates the multiple exposure.
EN 31
Download from Www.Somanuals.com. All Manuals Search And Download.
To take underwater photos
Select [b Underwater Wide] or [c Underwater Macro].
Creating panoramic images
([~ Panorama])
Use a waterproof case when shooting underwater.
See “Panorama options” (p. 51) for information on
adjusting settings for panoramas.
To lock the focus distance for underwater
shoots (AF lock)
1 Use FG to highlight [~ Panorama] and press A.
Taking pictures ussing [AAuto]
When [b Underwater Wide] or [c Underwater Macro]
is selected, press G.
1 Press the shutter button to take the first shot.
2 Move the camera slightly in the direction of the second
ON
shot.
ISO
AUTO
-
2.0
h
WB
AUTO
OFF
AF lock mark
4:3
AF
AF LOCK
L
N
Target mark
Pointer
HD
01:02:03
1
1/100 F5.0 +2.0
To cancel, press G again to clear the AF lock mark.
Cancel
Save
Screen when combining images
from left to right
To take pictures of a moving subject like a
pet ([ Pet])
3 Move the camera slowly while keeping it straight, and
stop the camera where the pointer and target mark
overlap.
1 Use FG to select [ Pet], and press A to set.
2 Frame a picture with the subject positioned in the AF
target mark and press the shutter button halfway.
● The camera releases the shutter automatically.
● When the camera recognizes the subject, the
AF target mark automatically tracks the subject
movement to focus on it continuously. “Continuous
focus on moving subjects [AF Tracking]” (p. 36)
Cancel
Save
To combine only two shots, press A before taking a
third shot.
32 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Repeat Step 3to take a third shot.
3 Compose the next shot so that join 1 overlaps join 2.
● After the third shot is taken, the camera
automatically processes the shots and the
combined panorama image is displayed.
To exit without creating a panorama, press the m
1
2
button.
If the shutter does not automatically release, try
[Manual] or [PC].
Cancel
Save
Taking pictures with [Manual]
1 Use HI to specify at which edge the next picture is
to be connected.
Framing the second shot
4 Press the shutter button to take the next shot.
To combine only two shots, press A before taking
the third shot.
ON
ISO
AUTO
Pan direction
-
2.0
h
5 Repeat steps 3and 4to take a third shot.
WB
AUTO
● After the third shot is taken, the camera
automatically processes the shots and the
combined panorama image is displayed.
OFF
4:3
AF
L
N
HD
To exit without creating a panorama, press the m
01:02:03
1
1/100 F5.0 +2.0
button.
2 Press the shutter button to take the first shot.
Joins
1
2
Cancel
Save
1st frame
EN 33
Download from Www.Somanuals.com. All Manuals Search And Download.
Taking pictures using [PC]
1 Use FGHI to select a pan direction.
Shooting with special effects
(ART Art Filter)
2 Press the shutter button to take the first shot, and then
Add an artistic effect to your photo by selecting the
compose the second shot.
desired art filter.
Before first shot
ON
ISO
Rotate the mode dial to ART.
AUTO
1
-
2.0
h
WB
AUTO
OFF
4:3
AF
L
N
HD
01:02:03
1
1/100 F5.0 +2.0
Use FG to highlight the desired effect and
press A.
2
After first shot
ON
ISO
AUTO
1
2
-
2.0
h
WB
AUTO
OFF
4:3
AF
L
N
Exit
● After the first shot, the area shown in white
reappears on the side of the display opposite the
pan direction. Frame subsequent photographs so
that they overlap with the image in the monitor.
HD
01:02:03
1
1/100 F5.0 +2.0
Icon indicating [Art Filter] that is set
3 Repeat Step 2until the desired number of shots is
taken, and then press the A or m button.
Panoramas can include up to 10 shots.
See the on-line help for the computer application for
information on creating panoramas.
34 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting mode
Option
[Pop Art
\Soft Focus
]Grainy Film
@Pin Hole
Art Filter
;Diorama
:Dramatic Tone
In [Art Filter], the optimum shooting settings are pre-
programmed for each scene effect. For this reason,
some settings cannot be changed in some modes.
If RAW is selected for the record mode when the
camera enters art filter mode, the record mode will
automatically be set to YN+RAW.
Art filter effects are not applied to RAW images.
Some art filters may produce “grainy” images.
EN 35
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Shooting FFunctions
Continuous focus on moving subjects
[AF Tracking]
The default settings of the function are highlighted in
.
1 Frame a picture with the subject positioned in the AF
target mark and press the shutter button halfway.
Choosing a focus mode/
shooting close-ups
2 Once the camera has detected the subject, the AF
target mark automatically tracks the subject and the
camera continuously adjusts focus while the shutter
button is pressed halfway.
Choose how the camera focuses. Choose a macro mode
to focus at short ranges when shooting close-ups.
3 To cancel AF tracking, release the shutter button.
Press H (&) and then press the INFO button.
1
Depending on the subject or shooting conditions, the
camera may be unable to lock focus or track subject
movement.
Use HI to highlight an option and press A
to select.
2
● To view the AF target display, press the INFO
Zooming in on the focus point [MF]
1 Press the INFO button to zoom in on the center of the
button.
display.
Option
Description
2 Use the wheel controller to focus manually.
● FG can be used in place of the wheel controller.
3 To cancel manual focus, press the INFO button.
When the shutter button is pressed
halfway, the camera focuses once
and then locks focus. Once the
camera has focused, a beep sounds
and the AF confirmation mark and
the AF target mark light.
AF
This enables shooting as close as
10 cm/3.9 in.*1 (30 cm/11.8 in.*2) to
the subject.
Macro
This enables shooting as close as
1 cm/2.5 in. to the subject.
Super Macro*3
AF Tracking
MF
The camera focuses continuously to
track moving objects.
Focus manually at the desired
distance.
*1
When the zoom is at the widest (W) position.
When the zoom is at the most telephoto (T) position.
The zoom is automatically fixed.
*2
*3
The flash (p. 37) and zoom (p. 22) cannot be set
during super macro shooting.
36 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Choosing a focus target
Using the flash
Position the AF target mark to focus on subjects that are
not at the center of the frame.
The flash functions can be selected to best match the
shooting conditions.
Press H (P) to view the AF target display.
Slide the flash switch to raise the flash.
1
2
1
Use FGHI to highlight an AF target and
press A to select.
● Moving the cursor outside the AF targets selects
all targets.
Press I (#) to display flash options.
2
Use HI to highlight an option and press
A to select.
3
If all targets are surrounded by a green frame
Option
Flash Auto
Description
The flash fires automatically in low-
light or backlight conditions.
The camera automatically
selects from the 11 focus
targets.
Pre-flashes are emitted to reduce the
occurrence of red eye in your photos.
Redeye
Fill In
The flash fires regardless of the
available light.
If one target is surrounded by a green frame
The flash emits pre-flashes to reduce
Red-Eye + Fill-In red-eye before firing. The flash fires
with every shot.
The camera will focus on
the subject in the selected
focus target.
Flash Off
Full
The flash does not fire.
For users who prefer manual
operation. Flash output is expressed
as a fraction of full power: full, 1/4,
1/16, or 1/64.
1/4
1/16
1/64
The flash may not be available at certain camera
settings.
EN 37
Download from Www.Somanuals.com. All Manuals Search And Download.
Sequential shooting/using the self
timer
Red-eye reduction (p. 37) is not available at a setting
of [Sequential]. The flash turns off automatically when
[High-Speed1] or [High-Speed2] is selected.
The camera takes photos while the shutter button is
pressed all the way down. Alternatively, the self-timer
can be used for self- or group-portraits or to reduce
camera shake when the camera is mounted on a tripod or
otherwise fixed in place.
Image size is fixed at 2560×1920 and ISO sensitivity
is fixed at [ISO Auto] when [High-Speed1] or [High-
Speed2] is selected.
Self-timer shooting is automatically canceled after
one shot.
Press G (jY) to display drive options.
1
2
To cancel the self-timer after it starts
Press the m button.
Use HI to highlight an option and press A
to select.
Adjusting the brightness
(exposure compensation)
Option
Single
Description
One frame is shot each time the
shutter button is pressed.
The standard brightness (appropriate exposure) set by the
camera based on the shooting mode (except for A,
M, SCN) can be adjusted brighter or darker to obtain a
desired shot.
Take sequential shots using the
focus, brightness (exposure) and
white balance for the first frame.
Sequential*1
The camera takes sequential shots
at a faster speed than in [Sequential].
Press F (F) to display exposure
compensation options.
1
High-Speed1
High-Speed2
The camera takes sequential shots at
a faster speed than in [High-Speed1].
Use HI to choose the value and press A to
select.
2
Sequential shooting that
automatically varies settings for each
frame (bracketing).
BKT*2
Brightening the monitor
The self-timer lamp turns on for
approx. 10 seconds, then blinks for
approx. 2 seconds, and then the
picture is taken.
To temporarily boost to monitor brightness, press and
hold the INFO button. Brightness returns to normal if no
operations are performed for 10 seconds.
Y12 sec
Y2 sec
The self-timer lamp blinks for approx.
2 seconds, and then the picture is
taken.
*1
Frame rate varies with image size (p. 41).
Bracketing is available when [AE-BKT] or [WB-BKT] is
selected for [Bracket Settings] (p. 48).
*2
38 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the ISO sensitivity
Processing options
Select a picture mode and make individual adjustments to
contrast, sharpness, and other parameters. Changes to
each picture mode are stored separately.
Press A to display the live control and use
FG to highlight ISO sensitivity.
1
ISO sensitivity
Press A to display the live control and use
FG to highlight picture mode.
1
Picture mode
Use HI to highlight an option and press A
to select.
2
Option
Description
Use HI to highlight an option and press A
to select.
2
The camera automatically adjusts the
sensitivity according to the shooting
scene.
ISO Auto
Value
Option
Description
Produces vivid colors.
Vivid
The ISO sensitivity is fixed to the
selected value.
Natural
Muted
Produces natural colors.
Produces flat tones.
In the ISO setting, although smaller values result in
less sensitivity, sharp images can be taken under fully
lit conditions. Larger values result in higher sensitivity,
and images can be taken at fast shutter speeds even
under low light conditions. However, high sensitivity
introduces noise into the resulting picture, which may
give it a grainy appearance.
Portrait
Monotone
Produces beautiful skin tones.
Produces black and white tone.
Making separate adjustments to settings
Highlight an option in the shooting menu and press I to
display additional parameters. [Picture Mode] (p. 45).
EN 39
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting to a natural color scheme
(white balance)
Option
Description
Choose when a white or gray
subject can be used to measure
white balance and the subject is
under mixed lighting or lit by an
unknown type of flash or other light
source.
For more natural coloring, choose a white balance option
suited to the scene.
One Touch
Press A to display the live control and use
FG to highlight white balance.
1
White balance
One-touch white balance
Measure white balance by framing a piece of paper or
other white object under the lighting that will be used in
the final photograph.
1 After selecting [One Touch], press the INFO button.
2 Frame a white object in the display.
● Frame the object so that it fills the display and no
shadows fall on it.
3 Press the shutter button all the way down.
● One-touch white balance options are displayed.
4 Highlight [Yes] and press A.
Use HI to highlight an option and press A
2
to select.
● The value is saved as a preset white balance
option.
Option
Description
● The value is stored until a new value is measured
and is not lost when the camera is turned off.
The camera automatically adjusts
the white balance according to the
shooting scene.
WB Auto
Making separate adjustments to settings
Highlight an option in the shooting menu and press I to
display additional parameters. [WB] (p. 46)
For shooting outdoors under a
clear sky.
Sunny
For photographing outdoor subjects
in the shade on sunny days.
Shadow
Cloudy
For shooting outdoors under a
cloudy sky.
For shooting under tungsten
lighting.
Incandescent
For shooting under white
fluorescent lighting (offices, etc.).
Fluorescent
Underwater
For underwater photography.
40 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Choosing the aspect ratio
Selecting the size of still images
Choose the aspect ratio (ratio of width to height) for new
photographs. Choose from [4:3] (standard), [16:9], [3:2],
or [6:6] according to your creative intent.
Press A to display the live control and use
FG to highlight the image size.
1
Image size
Press A to display the live control and use
FG to highlight the aspect ratio.
1
Aspect ratio
Use HI to highlight an option and press A
to select.
2
Use HI to highlight an option and press A
to select.
Supported record modes
Choose from RAW and four JPEG modes. Choose a
RAW+JPEG option to record both a RAW and a JPEG
image with each shot.
2
JPEG images are cropped to the selected aspect
ratio; RAW images, however, are not cropped but are
instead saved with information on the selected aspect
ratio.
When RAW images are played back, the selected
aspect ratio is shown by a frame.
EN 41
Download from Www.Somanuals.com. All Manuals Search And Download.
Image size and recording options
JPEG modes combine image size (Y, X, and W) and
Choosing a frame size for movies
compression ratio (F and N).
Press A to display the live control and use
FG to highlight the frame size.
1
Compression
rate
Pixel
count
Frame size
Image size
Application
F
N
(Fine) (Normal)
Y (Large)
YF*1
YN*1 3648×2736
3200×2400
Choose
according
to the size
at which the
image will be
printed.
X (Medium) XF
XN*1 2560×1920
1600×1200
1280×960
1024×768
Use HI to highlight an option and press A
to select.
2
Choose for
websites or
W (Small)
WF
WN*1
640×480 images that will
be printed at a
Option
Description
Record High Definition (HD) movies
with a frame size of 1280×720.
small size.
HD Quality
SD Quality
*1
Default.
Record standard definition movies
with a frame size of 640×480.
● You can choose the dimensions and compression
of X and W images. [X W Settings] (p. 47)
“Number of storable pictures (still images)/Continuous
recording length (movies) in the internal memory and
SD/SDHC/SDXC memory cards” (p. 79)
42 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting flash output
Choosing how the camera measures
brightness (metering)
Flash output can be adjusted if you find that your subject
to appears overexposed, or is underexposed even though
the exposure in the rest of the frame is just right.
Choose how the camera meters subject brightness.
Press A to display the live control and use
FG to highlight metering.
1
Press A to display the live control and use
FG to highlight flash compensation.
1
Metering
Flash compensation
Use HI to highlight an option and press A
to select.
2
Use HI to choose the value and press A to
select.
2
Option
Description
Flash compensation is not available with electronic
flash units if MANUAL is selected as the flash control
mode.
Choose for balanced exposure over
the entire frame.
ESP
The flash compensation value selected with the
camera is added to the value currently with the
electronic flash.
Metering is averaged over the entire
frame, with the greatest weight
assigned to the area in the center.
Ctr-
Weighted
The camera meters the center of
the frame.
Spot
If [ESP] is selected when shooting against bright back
lighting, the center of the frame may appear dark.
EN 43
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the neutral density (ND) filter
Using face priority
Use the camera’s built-in neutral density filter to reduce
the amount of light entering the camera for slower shutter
speeds and wider apertures.
When face priority is on, the camera sets focus and
exposure for the face shown by a frame.
Press A to display the live control and use
FG to highlight face priority.
1
Press A to display the live control and use
FG to highlight the ND filter.
1
Face priority
ND filter
Use HI to highlight [Face Priority On] and
press A to select.
● To view the AF target display, press the INFO
2
Use HI to highlight [ND Filter On] and press
A to select.
2
button.
Point the camera at your subject.
● If a face is detected, it will be indicated by a white
border.
3
Press the shutter button halfway to focus.
● When the camera focuses on the face in the white
border, the border will turn green.
4
Press the shutter button the rest of the way
down to shoot.
5
Face priority applies only to the first shot in each
sequence taken during sequential shooting.
Depending on the subject, the camera may not be
able to correctly detect the face.
44 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
For information on using the menus, see “Using the Menus” (p. 6).
Menus for Shooting FFunctions
The default settings of the function are highlighted in
.
Restoring the shooting functions to the defaultt settinngs [Reeset Phhoto Mode]
z
(Camera menu) X Reset Photo Mode
Submenu 2
Application
Restores the following menu functions to the default settings.
• AF mode (p. 36)
• Sequential shooting/Self-timer (p. 38)
• Live control items (p. 39 to 44)
• Flash (p. 37)
• Exposure compensation (p. 38)
Yes
z
• Menu functions in
(Camera menu)/A (Movie menu) (p. 45 to 51)
No
The current settings will not be changed.
Selecting the color tone of the image [Picture Mode]
z
(Camera menu) X Picture Mode
Submenu 2
Vivid
Application
Produces vivid colors.
Natural
Muted
Produces natural colors.
Produces flat tones.
Portrait
Monotone
Produces beautiful skin tones.
Produces black and white tones.
This item can also be accessed from the live control. “Processing options” (p. 39)
EN 45
Download from Www.Somanuals.com. All Manuals Search And Download.
Image processing options
Highlight an option in the shooting menu and press I to make adjustments to individual settings.
Submenu 3
Contrast
Submenu 4
Application
—
—
Adjust contrast.
Sharpness
Gradation
Saturation*1
Adjust sharpness.
Auto/Normal/High Key/Low Key Choose a tone range.
—
Adjust the vividness of colors.
Take pictures in black and white. Colors in the original subject
corresponding to the selected filter appear brighter in the black-
and-white image, while complementary colors appear darker.
N:Neutral/Ye:Yellow/Or:Orange/
R:Red/G:Green
B&W Filter*2
Pict. Tone*2
N:Neutral/S:Sepia/B:Blue/
P:Purple/G:Green
Choose a tint for monochrome images.
*1
[Monotone] not included.
[Monotone] only.
*2
Changes to contrast have no effect at settings other than [Normal].
These settings can not be adjusted using the live control.
Adjusting to a natural color scheme [WB]
z
(Camera menu) X WB
Submenu 2
WB Auto
Sunny
Application
The camera automatically adjusts the white balance according to the shooting scene.
For shooting outdoors under a clear sky.
Shadow
Cloudy
For photographing outdoor subjects in the shade on sunny days.
For shooting outdoors under a cloudy sky.
Incandescent For shooting under tungsten lighting.
Fluorescent For shooting under white fluorescent lighting (offices, etc.).
Underwater
One Touch
For underwater photography.
Choose when a white or gray subject can be used to measure white balance and the subject is
under mixed lighting or lit by an unknown type of flash or other light source.
This item can also be accessed from the live control. “Adjusting to a natural color scheme (white balance)” (p. 40)
46 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
For information on using the menus, see “Using the Menus” (p. 6).
White balance compensation
White balance compensation can be used to fine-tune each of the preset white balance options.
1 Highlight a white balance option and press I.
2 Use HI to highlight an axis and use FG to choose a value.
●
A (amber–blue):
Choose positive values for warmer colors, negative values for colder colors.
●
G (green–magenta):
Choose positive values for greener hues, negative values for a magenta cast.
3 Press A when settings are complete.
White balance compensation can not be adjusted using the live control.
Choosing an image size (X or W) and commpresssion [[X W Settings]
z
(Camera menu) X X W Settings
Submenu 2
Submenu 3
Application
X: 3200×2400/2560×1920/1600×1200
W: 1280×960/1024×768/640×480
Pixel Count
Choose the size of images in pixels.
Fine
Choose for fine-quality images.
Compression
Normal
Choose for normal-quality images.
“Selecting the size of still images” (p. 41)
EN 47
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting flash settings [Flash Settings]
z
(Camera menu) X Flash Settings
Submenu 2
Submenu 3
Off/On
Application
#Slow
Choose whether to use slow shutter speeds when using the flash.
Control flash timing. (If [#Sync 1] is selected, the flash will fire
immediately after the shutter opens. If [#Sync 2] is selected, the flash
will fire just before the shutter closes so that moving light sources appear
to be followed by streams of light.)
#Sync
#Sync 1/#Sync 2
#RC Mode
Off/On
Choose whether to use a wireless flash unit.
Note that when [On] for [#RC Mode], pictures will only be taken if a wireless flash unit is available.
Choosing thhe bracketing increment andd numberr of shotts [Braccket Setttings]
z
(Camera menu) X Bracket Settings
Submenu 2
Application
Vary exposure over a sequence of three shots. (The camera takes three
shots while the shutter button is pressed all the way down, the first at the
metered exposure value, and the second under and the third over the
metered value by the selected amount.)
Off/3f 0.3EV/3f 0.7EV/
3f 1.0EV/3f 1.3EV/3f 1.7EV
AE BKT*1
WB BKT
A-B (Amber–Blue):
Off/3f 2Step/3f 4Step/
3f 6Step
G-M (Green–Magenta):
Off/3f 2Step/3f 4Step/
3f 6Step
Each time a picture is taken, the camera creates three images, each with
a different hue (white balance) to A-B, or G-M direction.
*1
Exposure is modified by varying shutter speed and aperture (mode P), shutter speed (mode A), or aperture (mode S).
No pictures will be taken if there is insufficient space on the memory card for all the pictures in the bracketing
sequence.
The bracketing increment is added to the value selected for exposure or white balance compensation.
48 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
For information on using the menus, see “Using the Menus” (p. 6).
Shooting aat higher magnificatioons than
optical zoom [Digital Zoom]
Taking pictures with a conversion lens
[1]
z
z
(Camera menu) X Digital Zoom
(Camera menu) X 1
Submenu 2
Application
Disable digital zoom.
Submenu 2
Application
Off
On
Select when taking pictures without a
conversion lens.
Off
TCON-17
Enable digital zoom.
Select when taking pictures with a
designated optional conversion lens.
[Digital Zoom] is not available when [Super Macro]
(p. 36) is selected.
When a conversion lens is attached, light from the
built-in flash can cause vignetting where shadows
from the conversion lens appear on the images.
The option selected for [Digital Zoom] affects the
appearance of the zoom bar.
“To take larger images” (p. 22)
When a conversion lens is attached, the camera may
take extra time to focus.
Reducing the blur caused by the
camera shakee when shooting
[Image Sttabilizer]
Conversion lens adapter CLA-12 (available
separately) is required to attach the conversion lens
to the camera.
z
(Camera menu) X Image Stabilizer
Submenu 2
Application
The image stabilizer is deactivated.
This is recommended when shooting
with the camera fixed in place on a
tripod or other stable surface.
Off
On
The image stabilizer is activated.
If [On] is selected for [Image Stabilizer], the camera
may make noise when the shutter button is pressed.
Image stabilization may have no effect if camera
shake is too severe.
When the shutter speed is extremely slow, such as
when pictures are taken at night, [Image Stabilizer]
(still images) may not be as effective.
EN 49
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the AF illluminator to focus on
poorly-lit subjects [AF Illuminat.]
Displaying iindicattors [Innfo Off]
z
(Camera menu) X Info Off
z
(Camera menu) X AF Illuminat.
Submenu 2
Application
Submenu 2
Application
Indicators automatically clear from
the display if no operations are
performed for 10 seconds.
10 sec
Hold
Off
On
The AF illuminator is not used.
When the shutter button is pressed
halfway down, the AF illuminator
turns on to aid focusing.
Indicators are always displayed
during shooting.
Indicators that are always displayed may “burn in” to
the monitor. “Monitor” (p. 84)
AF illuminator
Viewing thee image iimmmediateely after
shooting [Rec View]
z
(Camera menu) X Rec View
Submenu 2
Application
The image being recorded is not
displayed. This allows the user
to prepare for the next shot while
following the subject in the monitor
after shooting.
Off
The image being recorded is
displayed. This allows the user to
make a brief check of the image that
was just taken.
On
Even when set to [On], you can resume shooting
while the image is displayed.
50 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
For information on using the menus, see “Using the Menus” (p. 6).
Panorama options [Panorama]
Choosingg moviiee framee size
[Movie Resolution]
z
(Camera menu) X Panorama
A (Movie menu) X Movie Resolution
Submenu 1
Application
Submenu 2
HD Quality
SD Quality
Application
Three frames are taken and
combined by the camera. The user
only composes the shots so that the
target marks and pointers overlap,
and the camera automatically
releases the shutter.
Shoot high definition movies with a
frame size of 1280×720.
Auto
Shoot standard definition movies with
a frame size of 640×480.
Three frames are taken and
combined by the camera. The user
composes the shots using the guide
frame and manually releases the
shutter.
“Number of storable pictures (still images)/Continuous
recording length (movies) in the internal memory and
SD/SDHC/SDXC memory cards” (p. 79)
Manual
PC
This item can also be accessed from the live control.
“Choosing a frame size for movies” (p. 42)
The frames that were taken are
combined into a panorama image
using the PC software.
Recording ssound wwhen shhooting
movies [R]
For details on installing the PC software, see
“Charging the battery and setting up using the
supplied CD” (p. 14).
A (Movie menu) X R
Submenu 2
Application
No sound is recorded.
Sound is recorded.
Image size (p. 41) is fixed at 1600×1200 when [Auto]
or [Manual] is selected.
Off
On
The focus, exposure (p. 38), zoom position (p. 22),
and white balance (p. 40) are locked at the first
frame.
The flash (p. 37) is fixed to $(Flash Off) mode.
Shooting panoramas
“Creating panoramic images ([~ Panorama])” (p. 32)
EN 51
Download from Www.Somanuals.com. All Manuals Search And Download.
Menus for Playback, EEditinng, annd PPrriinnttiinngg FFuunnccttiioonnss
Playing back pictures automatically
[Slideshow]
Retouching phootogrraphs
[RAW Data Edit]//[JPEEGG Editt]
q(Playback menu) X Slideshow
q(Playback menu) X Edit X
RAW Data Edit/JPEG Edit
Submenu 2
Start
Submenu 3
Application
1 Display the image to be edited and press Q.
―
Start the slideshow.
● [RAW Data Edit] is displayed if the picture is a
RAW image, [JPEG Edit] if it is a JPEG image.
Off/
Cosmic/
Breeze/
Mellow/
Dreamy/
Urban
2 Highlight [RAW Data Edit] or [JPEG Edit] and press
Q.
Select background
music.
BGM
Slide
[RAW Data Edit]
Create a JPEG copy of a RAW image.
Select the content
to be included in the
slideshow.
All/Still Picture/
Movie
The JPEG copy is processed using the settings
currently stored in the camera. Adjust camera settings
before choosing this option.
Choose the interval
Slide Interval 2–10 seconds before the next slide is
displayed.
Choose whether to
display entire movies or
only a portion of each
Movie Interval Full/Short
movie.
During a slideshow, press I to advance one frame,
H to go back one frame.
52 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
For information on using the menus, see “Using the Menus” (p. 6).
[JPEG Edit]
Retouching red-eye in pictures taken with
Choose from the following options:
the flash [Reedeyee Fix]
1 Select an image using HI and press A.
Submenu 2
Application
● The edited copy is saved to a separate file.
Shadow Adj
Brighten dark backlit subjects.
This option may have no effect with some images.
Reduce red-eye in pictures taken with
the flash.
Redeye Fix*1
The quality of the retouched copy may be lower than
the original.
*2
Crop images.
P
Cropping images [P]
Change the aspect ratio from 4:3
(standard) to [3:2], [16:9], or [6:6].
After selecting an aspect ratio, use
FGHI to position the crop.
1 Select an image using HI and press A.
Aspect*2
2 Size the crop using the zoom lever and use FGHI
to position the crop.
Black & White
Sepia
Convert images to black and white.
Convert images to sepia.
Crop
Saturation
Adjust the vividness of colors.
Convert images to 1280 × 960, 640 ×
480, or 320 × 240.
*3
Q
Make the skin of portrait subjects
more smooth and translucent.
e-Portrait*1
Set
*1
Not available with some images.
Applies only to images with an aspect ratio of 4:3
(standard).
Images with an aspect ratio other than 4:3 (standard)
are converted to the closest available size. Sizes larger
than the original size are not avaialble.
3 Press A once you have selected the crop.
*2
*3
● The edited copy is saved to a separate file.
[JPEG Edit] is not available if there is insufficient
space on the memory card or with RAW images,
images that have been processed on a computer, or
images recorded with another make of camera.
EN 53
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting vividness [Saturation]
1 Select an image using HI and press A.
[R Start]
1 Select an image using HI.
2 Use FG to choose the amount of saturation and
2 Point the microphone at the sound source.
press A. The effect can be previewed in the monitor.
3 Use FG to highlight [Yes] and press A.
● The edited copy is saved to a separate file.
Microphone
Resizing images [Q]
Submenu 3
Application
Copy a large image at a size suitable
for printing at post-card sizes.
1280×960
640×480
320×240
Copy a large image at a size suitable
for e-mail or the web.
3 Use FG to highlight [R Start], and press A.
● Recording starts.
1 Select an image using HI and press A.
2 Use FG to highlight a size and press A.
● The edited copy is saved to a separate file.
[Erase]
1 Use HI to select an image marked with a H icon.
2 Use FG to highlight [Erase], and press A.
● The sound is deleted.
Adding sound to still pictures [R]
q(Playback menu) X Edit X R
Submenu 2
Application
No
No sound is recorded.
Sound can be recorded for up to
30 seconds while a photograph is
displayed, allowing you to record
comments or impressions about
the image.
R Start
Delete sound recorded with an
image.
Erase
54 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
For information on using the menus, see “Using the Menus” (p. 6).
To individually select and erase images
[Sel. Image]
1 Use FG to highlight [Sel. Image], and press A.
Saving print settings to the image data
[Print Order]
q(Playback menu) X Print Order
2 Use FGHI to display the image to be erased and
press A to add a R mark to the image.
“Print Reservations (DPOF)” (p. 68)
● Rotate the zoom lever to T to display a single
frame display. Rotate the zoom lever to W to return
to the index view.
Print reservation can be set only for still images that
are recorded to the card.
4/30
Sel. Image
Erasing images [Erase]
R mark
2
q(Playback menu) X Erase
Submenu 1
All Erase
Application
4
All images in the internal memory or
card will be erased.
Erase/Cancel
Images are individually selected and
erased.
Sel. Image
Erase
3 Repeat Step 2to select the images to be erased,
and then press the m button to erase the selected
Deletes the image displayed.
images.
4 Use FG to highlight [Yes] and press A.
Images in internal memory can only be erased when
no memory card is inserted.
● The images with a R mark are erased.
Images will only be erased from a memory card if it is
currently inserted in the camera.
To erase all images [All Erase]
1 Use FG to highlight [All Erase] and press A.
2 Use FG to highlight [Yes] and press A.
Protected images cannot be erased.
EN 55
Download from Www.Somanuals.com. All Manuals Search And Download.
Protectinng images [?]
q(Playback menu) X ?
Protected images cannot be erased by [Erase] (p. 25,
55), [Sel. Image], or [All Erase] (p. 55), but all images
are erased by [Memory Format]/[Format] (p. 57).
1 Use HI to select an image.
2 Press A.
● Press A again to cancel the settings.
3 If necessary, repeat Steps 1and 2to protect other
images, and press the m button.
Rotating immages [Rotate]
q(Playback menu) X Rotate
1 Use HI to select an image.
2 Press A to rotate the image.
3 If necessary, repeat Steps 1and 2to make settings
for other images, and press the m button.
The new picture orientations will be saved even after
the power is turned off.
56 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
For information on using the menus, see “Using the Menus” (p. 6).
Menus for Other Cameera Setttings
Saving custom settings
[Custom MMode Setup]
Copying imagges in thee internaal memory
to the carrd [Backup]
x (Setup menu) X Custom Mode Setup
x (Setup menu) X Backup
Submenu 2
Set
Reset*1
Application
Save current settings.
Delete saved settings.
Submenu 2
Yes
No
Application
Backs up image data in the internal
memory to the card.
Cancels the backup.
*1
Settings revert to mode P.
It takes some time to back up data. Check that
the battery has sufficient power before starting the
backup.
Erasing data completely
[Memory Formmat]//[Format]
x (Setup menu) X Memory Format/Format
Before formatting, check that no important data is left
in the internal memory or card.
Cards must be formatted with this camera before
first use or after being used with other cameras or
computers.
Submenu 2
Yes
No
Application
Completely erases the image data
in the internal memory*1 or card
(including protected images).
Cancels formatting.
*1
Be sure to remove the card before formatting the
internal memory.
EN 57
Download from Www.Somanuals.com. All Manuals Search And Download.
Selectinng a metthhod for connecting the
camera to otther devices
[USB Connection]
Turning oon the caamera wwiith the q
button [qPoower On]
x (Setup menu) X qPower On
x (Setup menu) X USB Connection
Submenu 2
Yes
Application
Submenu 2
Auto
Application
The qbutton turns the camera on
in playback mode.
USB options are displayed when
the camera is connected to another
device.
The camera is not turned on. To turn
on the camera, press the n
button.
No
The camera is treated as a Mass
Storage device.
Storage
MTP
Select when transferring images to
a computer running Windows Vista
or Windows 7 without using the
supplied software.
Selecting tthe cammera soound and its
volume [[Soundd Settiings]
x (Setup menu) X Sound Settings
Select when connecting to a
PictBridge-compatible printer.
Print
Submenu 2
Submenu 3
Application
Choose the sound
made by camera
controls (excluding
the shutter button).
System requirements
Sound Type
1/2/3
Windows XP (Service Pack 1 or later)/
Windows Vista/Windows 7
Windows
OFF (No Sound)
or 5 levels of
volume
Adjusts the image
playback volume.
Macintosh
Mac OS X v10.3 or later
qVolume
Even in the case of computers with USB ports,
operation is not guaranteed if:
Choose the volume
of the sound made
by camera controls
(excluding the
OFF (No Sound)
or 5 levels of
volume
● The USB ports are not built-in but were added
using an expansion board or card
Volume
shutter button).
● The operating system is not factory installed or the
computer is home built
58 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
For information on using the menus, see “Using the Menus” (p. 6).
Resetting file numbering [File Name]
Adjustingg the CCCD and tthe imagge
processing ffunctionn [Pixel MMappingg]
x (Setup menu) X File Name
x (Setup menu) X Pixel Mapping
Folder name
DCIM
Folder name
100OLYMP
File name
This function has already been adjusted at factory
shipping, and no adjustment is needed right
after purchase. Approximately once a year is
recommended.
Pmdd0001.jpg
For best results, wait at least one minute after taking
or viewing pictures before performing pixel mapping.
If the camera is turned off during pixel mapping, be
sure to perform it again.
999OLYMP
Pmdd9999.jpg
To adjust the CCD and the image
processing function
Press A when [Start] (Submenu 2) is displayed.
Automatic
numbering
Automatic
numbering
● The camera checks and adjusts the CCD and the
image processing function at the same time.
Month: 1 to C
(A=October,
B=November,
C=December)
Adjusting tthe brighttness of tthhe monitor
Pmdd
[s]
x (Setup menu) X s
Day: 01 to 31
Submenu 2
Application
Adjusting monitor brightness
1 Use FG to adjust (the effect can be viewed in the
monitor), and then press A.
File numbering is reset when a new
card is inserted*1 (choose when
organizing images by card).
Reset
s
When a new card is inserted, file
and folder numbering continue from
the previous card (choose when
organizing images by file and folder
number).
Auto
*1
Folder numbering is reset to 100, file numbering to
0001.
Back
Set
EN 59
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing images on a TV [TV Out]
x (Setup menu) X TV Out
Different countries and regions use different video signal standards. Before connecting the camera, choose a video
signal standard that matches that used by the TV.
Submenu 2
Submenu 3
Application
Choose when connecting the camera to TVs in countries or regions
where NTSC is used (e.g., North America, Taiwan, Korea, and Japan).
NTSC
PAL
Video Out
Choose when connecting the camera to TVs in countries or regions
where PAL is used (e.g., Europe and China).
HDMI Out
480p/576p / 720p / 1080i Choose an HDMI output format.
Off
On
Playback operations are performed using camera controls.
Playback operations are performed using the TV remote control.
HDMI Control
Camera factory defaults vary with the country or region of sale.
Viewing images on a TV
Using an AV cable
1 Match the camera video signal format ([NTSC]/[PAL]) to that used by the TV.
2 Connect the camera to the TV.
Connect to the TV video
input jack (yellow) and
audio input jack (white).
Connector cover
Multi-connector
AV cable (supplied)
60 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
For information on using the menus, see “Using the Menus” (p. 6).
Using an HDMI cable
1 Match the camera digital signal format ([480p/576p]/[720p]/[1080i]) to that used by the TV.
2 Connect the camera to the TV.
The [1080i] option gives priority to the 1080i HDMI output. If the TV is not set up for 1080i input, the camera changes
the format first to 720p and if this is not supported then to 480p and finally to 576p. For information on changing TV
HDMI input settings, see to the instruction manual provided with the TV.
Do not connect the HDMI cable when the camera is connected to a computer or other device using the USB cable.
Connector cover
HDMI micro connector
CB-HD1 type D HDMI cable (sold
Connect to the HDMI
separately)
connector on the TV.
Type C
Type D (CB-HD1)
3 Turn the TV on and select the HDMI input to which the camera is connected.
See the instruction manual provided with your TV for more information.
4 Turn the camera on and use HI to view images.
Use an HDMI cable that matches the HDMI micro connector on the camera and the HDMI connector on the TV.
When the camera and TV are connected by both an AV cable and an HDMI cable, the HDMI cable will take priority.
Images and other information may be cropped for display on the TV.
EN 61
Download from Www.Somanuals.com. All Manuals Search And Download.
Using a remote control
1 Select [On] for [HDMI Control] and turn the camera off.
Changing thhe displlay langguage [W]
x (Setup menu) X W
2 Connect the camera to the TV using an HDMI cable.
“Using an HDMI cable” (p. 61)
Submenu 2
Application
3 First turn on the TV, and then turn on the camera.
The language for the menus and
error messages displayed on the
monitor is selected.
● Follow the on-screen guide displayed by the TV to
operate the camera.
Languages
With some TVs, operations cannot be performed with
the TV remote control even though the operation
guide is displayed on the screen.
1 Use FGHI to select your language and press the
A button.
If operations cannot be performed with the TV remote
control, set [HDMI Control] to [Off] and use the
controls on the camera.
Setting thhe datee and tiime [X]
x (Setup menu) X X
“Date, time, time zone, and language” (p. 18)
Reducing power consumption between
shots [Sleep]
To select the date display order
1 Press I after setting Minute, and use FG to select
x (Setup menu) X Sleep
the date display order.
Submenu 2
Application
X
The monitor turns off automatically
to save battery power when no
operations are performed (sleep
mode). Choose the delay before the
camera enters sleep mode.
20sec/1min/3min/
5min
Y
M
D
Time
2011 . 02 . 26
12㧦30
Y/M/D
Date order
If no operations are performed for about 12 minutes
after the camera enters sleep mode, the camera will
turn off automatically.
Cancel
Set
2 Press A when settings are complete.
Canceling sleep mode
Press the shutter button or an arrow key or rotate the
mode dial.
62 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
For information on using the menus, see “Using the Menus” (p. 6).
Switching between home and travel destination timee zoneess [Worlld Time]
x (Setup menu) X World Time
You will not be able to select a time zone using [World Time] if the camera clock has not first been set using [X].
Submenu 2
Submenu 3
Application
The time in the home time zone (the time zone selected for x in
submenu 2).
x
Home/Alternate
The time in the travel destination time zone (the time selected for z in
submenu 2).
z
x*1
—
—
Select the home time zone (x).
z*1, 2
Select the travel destination time zone (z).
*1
In areas where daylight saving time is in effect, use FG to turn daylight saving time ([Summer]) on.
When you select a time zone, the camera automatically calculates the time difference between the selected zone and
the home time zone (x) to display the time in the travel destination time zone (z).
*2
EN 63
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing
Direct printing (PictBridge*1)
Turn on the printer, and then connect the
printer and camera.
2
By connecting the camera to a PictBridge-compatible
printer, you can print images directly without using a
computer.
Connector cover
To find out if your printer supports PictBridge, refer to the
printer’s instruction manual.
USB cable
(supplied)
*1
PictBridge is a standard for connecting digital cameras
and printers of different makers and printing out pictures
directly.
The printing modes, paper sizes, and other
parameters that can be set with the camera vary
depending on the printer that is used. For details,
refer to the printer’s instruction manual.
Multi-connector
For details on the available paper types, loading
paper, and installing ink cassettes, refer to the
printer’s instruction manual.
Y button
Printing images at the printer’s
standard settings [Easy Print]
In the setup menu, set [USB Connection] (p.58) to
[Print].
Display the image to be printed on the
monitor.
1
Easy Print Start
Custom Print
“Viewing images” (p. 23)
Press I to start printing.
3
4
To print another image, use HI to select an
image, and press A.
64 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
To exit printing
After a selected image is displayed on the screen,
disconnect the USB cable from the camera and printer.
Submenu 2
Print
Application
This prints the image selected in
Step 5.
This prints all images stored in the
internal memory or card.
All Print
This prints one image in a multiple
layout format.
Multi Print
All Index
This prints an index of all images
stored in the internal memory or card.
Exit
Print
This prints images based on the print
reservation data on the card.
Print Order*1
*1
Changing the printer’s settings for
printing [Custom Print]
[Print Order] is available only when print reservations
have been made. “Print Reservations (DPOF)” (p. 68)
Use FG to highlight [Size] (Submenu 3), and
press I.
3
Follow Steps 1 and 2 in [Easy Print] (p. 64),
and press A.
1
If the [Printpaper] screen is not displayed, the [Size],
[Borderless], and [Pics/Sheet] are set to the printer’s
standard.
Use FG to highlight the print mode, and
press A.
2
Printpaper
Print Mode Select
Size
Borderless
Standard
Print
All Print
Multi Print
All Index
Print Order
Standard
Back
Set
Exit
Set
EN 65
Download from Www.Somanuals.com. All Manuals Search And Download.
To make the detailed printer settings
1 Use FGHI to select the setting, and press A.
Use FG to highlight the [Borderless] or
[Pics/Sheet] settings, and press A.
4
Print Info
Submenu 4
Application
The image is printed with a border
around it ([Off]).
The image is printed to fill the entire
paper ([On]).
<x
Date
File Name
P
1
Without
Without
Off/On*1
(The number of
images per sheet
varies depending
on the printer.)
The number of images per sheet
([Pics/Sheet]) is selectable only when
[Multi Print] is selected in Step 2.
Exit
Submenu 5 Submenu 6
Set
Application
This selects the number
of prints.
*1
The available settings for [Borderless] vary depending
on the printer.
<×
0 to 10
Selecting [With] prints the
images with the date.
Selecting [Without] prints the
images without the date.
If [Standard] is selected in Steps 3 and 4, the image
is printed at the printer’s standard settings.
Date
With/Without
4/30
10
Selecting [With] prints the file
name on the image.
File Name
With/Without Selecting [Without] does not
print any file name on the
image.
100-0004
Single Print
’11/02/26 12:30
Print
More
(Proceeds to
This selects a portion of the
the setting
P
image for printing.
screen.)
Use HI to select an image.
5
6
Press F to make a print reservation for the
current image. Press G to make the detailed
printer settings for the current image.
66 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
To crop an image [P]
1 Use the zoom lever to select the size of the cropping
frame, use FGHI to move the frame, and then
press A.
Use FG to highlight [Print] and press A.
● Printing starts.
● When [Option Set] is selected in [All Print] mode,
[Print Info] screen is displayed.
9
● When printing is finished, the [Print Mode Select]
screen is displayed.
Print Mode Select
Print
All Print
Multi Print
All Index
Print Order
Set
2 Use FG to highlight [OK] and press A.
Exit
Set
To cancel printing
1 When [Do Not Remove USB Cable] is displayed, press
the m button, use FG to select [Cancel], and
then press A.
If necessary, repeat Steps 5 and 6 to select
the image to be printed, make the detailed
settings, and set [Single Print].
7
8
Do Not Remove USB Cable
Print
Cancel
Press A.
Continue
Cancel
Print Mode Select
Print
Cancel
Set
Press the m button.
10
Back
Set
When the message [Remove USB Cable] is
displayed, disconnect the USB cable from the
camera and printer.
11
EN 67
Download from Www.Somanuals.com. All Manuals Search And Download.
Print Reservations (DPOF*1
)
Single-frame print reservations [
<]
In print reservations, the number of prints and date imprint
option are saved in the image on the card. This enables
easy printing at a printer or print shop supporting DPOF
by using only the print reservations on the card without a
computer or a camera.
Display the setup menu.
1
“Using the Menus” (p. 6)
In the q(playback) menu, highlight [Print
Order] and then press A.
2
*1
DPOF is a standard for storing automatic printout
information from digital cameras.
Print Order
Print reservations can be set only for the images
stored on the card. Insert a card with recorded
images before making print reservations.
<
U
DPOF reservations set by another DPOF device
cannot be changed by this camera. Make changes
using the original device. Making new DPOF
reservations with this camera will erase the
reservations made by the other device.
Exit
Set
DPOF print reservations can be made for up to 999
images per card.
Use FG to highlight [<] and press A.
3
4/30
0
100-0004
’11/02/26 12:30
Set
68 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Reserving one print each of all images
on the card [
Use HI to select the image for print
reservation. Use FG to select the quantity.
Press A.
4
U
]
Follow Steps 1 and 2 in [<] (p. 68).
Use FG to highlight [U] and press A.
Follow Steps 5 and 6 in [<].
1
2
3
Resetting all print reservation data
Follow Steps 1 and 2 in [<] (p. 68).
1
2
Use FG to highlight a [X] (date print)
screen option and press A.
5
Use FG to highlight either [<] or [U], and
press A.
Submenu 2
Application
Print Order Setting
No
This prints the image only.
This prints the image with the
shooting date.
Print Ordered
Date
Time
Reset
Keep
This prints the image with the
shooting time.
Back
Set
Use FG to highlight [Reset] and press A.
3
(
)
1
1
Set
Cancel
Use FG to highlight [Set] and press A.
6
EN 69
Download from Www.Somanuals.com. All Manuals Search And Download.
Resetting the print reservation data
for selected images
Follow Steps 1 and 2 in [<] (p. 68).
1
Use FG to highlight [<] and press A.
2
Use FG to highlight [Keep] and press A.
3
4
Use HI to select the image with the print
reservation you want to cancel. Use FG to
set the print quantity to “0”.
If necessary, repeat Step 4, and then press A
when finished.
5
Use FG to highlight a [X] (date print)
screen option and press A.
● The settings are applied to the remaining images
6
with the print reservation data.
Use FG to highlight [Set] and press A.
7
70 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Usage Tips
If the camera does not work as intended, or if an error
message is displayed on the screen, and you are unsure
of what to do, refer to the information below to fix the
problem(s).
Shutter button
“No picture is taken when the shutter button is
pressed”.
● Cancel sleep mode.
If no operations are performed for the specified
time when the camera is on, the camera will
enter sleep mode and the monitor will turn off
automatically. While the camera is in sleep mode,
pressing the shutter button will have no effect; to
restore normal operation, operate the zoom lever
or other camera controls. If no operations are
performed for some time after the camera enters
sleep mode, the camera will turn off automatically.
Use the n button to turn the camera on.
Troubleshooting
Battery
“The camera does not work even when batteries are
installed”.
● Insert recharged batteries in the correct direction.
“Inserting the battery and the SD/SDHC/SDXC
memory card (sold separately)” (p. 13), “Charging
the battery and setting up using the supplied CD”
(p. 14), “Charging the battery with the supplied
USB-AC adapter” (p. 17)
● Press the qbutton to switch to the shooting
mode.
● Wait until #(flash charge) stops blinking before
taking pictures.
● Battery performance may have been reduced
temporarily due to low temperature. Take the
batteries out of the camera, and warm them by
putting them in your pocket for a while.
Monitor
“Difficult to see”.
● Condensation*1 may have occurred. Turn off the
power, and wait for the camera body to become
acclimated to the surrounding temperature and dry
out before taking pictures.
Card/Internal memory
“An error message is displayed”.
“Error message” (p. 72)
*1
Dew drops can form in the camera when it is
suddenly taken from a cold location into a warm,
humid room.
“Vertical lines appear on the screen”.
● This condition may occur when the camera is
pointed at an extremely bright subject under a clear
sky and so on. The lines do not appear, however,
in the final image.
“Light is caught in the picture”.
● Shooting with flash in dark situations results in an
image with many flash reflections on dust in the air.
EN 71
Download from Www.Somanuals.com. All Manuals Search And Download.
Date and time function
“Date and time settings return to the default setting”.
Error message
Corrective action
Card problem
Use FG to select [Format], and
press A. Next, use FG to select
[Yes], and press A.*2
Card Setup
● If the batteries are removed and left out of the
camera for about a day*2, the date and time
settings return to the default setting, and must
be reset.
Power Off
Format
Set
*2
The time until the date and time settings return to
Memory Setup
Internal memory problem
Use FG to select [Memory
Format], and press A. Next, use
FG to select [Yes], and press
A.*2
the default setting varies depending on how long
the batteries have been loaded.
Power Off
Memory Format
“Date, time, time zone, and language” (p. 18)
Set
Miscellaneous
“The camera makes a noise when taking pictures”.
Internal memory/Card problem
Take pictures before viewing them.
● The camera may activate the lens and make a
noise even if no operation is performed. This
is because the camera automatically performs
actions of auto focus as far as it is ready to shoot.
No Picture
Problem with selected image
Use photo retouch software, etc.
to view the image on a computer.
If the image still cannot be viewed,
the image file is corrupted.
Picture Error
Error message
When one of the messages below is displayed on the
monitor, check the corrective action.
Problem with selected image
Use photo retouch software, etc. to
edit the image on a computer.
The Image Cannot
Be Edited
Error message
Corrective action
Card problem
Insert a new card.
Battery problem
Charge the battery.
Card Error
Battery Empty
No Connection
No Paper
Card problem
Connection problem
Connect the camera and computer
or printer correctly.
The card write-protect switch is
set to the “LOCK” side. Release
the switch.
Write Protect
Internal memory problem
• Insert a card.
Printer problem
Load paper into the printer.
• Erase unwanted images.*1
Memory Full
Card Full
Card problem
Printer problem
Refill the ink in the printer.
• Replace the card.
• Erase unwanted images.*1
No Ink
72 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting tips
Error message
Jammed
Corrective action
Printer problem
When you are unsure of how to take a picture that you
envision, refer to the information below.
Remove the jammed paper.
Printer problem
Return to the status where the
printer can be used.
Focusing
Settings
Changed*3
“Focusing on the subject”
Printer problem
● Taking a picture of a subject not in the center
of the screen
Turn off the camera and printer,
check the printer for any problems,
and then turn the power on again.
After focusing on an object at the same distance
as the subject, compose the shot, and take the
picture.
Print Error
Problem with selected image
Use a computer to print.
Pressing the shutter button halfway (p. 21)
● Using face priority (p. 44)
Cannot Print*4
● Taking a picture in [AF Tracking] mode (p. 36)
The camera tracks the subject movement
automatically to focus on it continuously.
*1
Before erasing important images, download them to a
computer.
All data will be erased.
This is displayed, for instance, when the printer’s paper
tray has been removed. Do not operate the printer while
making the print settings on the camera.
This camera may be unable to print images taken by
other cameras.
*2
*3
● Positioning the focus point
“Choosing a focus target” (p. 37)
● Taking a picture of subjects where autofocus
is difficult
*4
In the following cases, after focusing on an object
(by pressing the shutter button halfway down) with
high contrast at the same distance as the subject,
compose the shot, and take the picture.
Subjects with low contrast
When extremely bright objects
appear in the center of the screen
EN 73
Download from Www.Somanuals.com. All Manuals Search And Download.
Camera shake
Object with no vertical lines*1
“Taking pictures without camera shake”
● Taking pictures using [Image Stabilizer] (p. 49)
● Using the C (Sport) option in SCN mode
(p. 31)
*1
It is also effective to compose the shot by holding the
camera vertically to focus, and then returning to the
horizontal position to take the picture.
The C (Sport) mode uses a fast shutter speed
and can reduce the blur incurred by a moving
subject.
● Taking pictures at a high ISO sensitivity
If a high ISO sensitivity is selected, pictures can
be taken at a high shutter speed even at locations
where a flash cannot be used.
When objects are at different
distances
“Selecting the ISO sensitivity” (p. 39)
Exposure (brightness)
Fast-moving objects
“Taking pictures with the right brightness”
● Taking pictures using [Fill In] (p. 37) flash
A subject against backlight is brightened.
● Taking pictures using exposure compensation
(p. 38)
The subject is not in the center of
the frame
Adjust the brightness while viewing the screen for
taking the picture. Normally, taking pictures of white
subjects (such as snow) results in images that are
darker than the actual subject. Use the exposure
compensation to adjust in the positive (+) direction
to express whites as they appear. When taking
pictures of black subjects, on the other hand, it is
effective to adjust in the negative (-) direction.
74 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback/Editing tips
Color hue
“Taking pictures with colors at the same shade as
they appear”
Playback
● Taking pictures by selecting white balance
(p. 40, 46)
“Playing images in the internal memory and card”
● Remove the card when playing pictures in the
internal memory
Best results in most environments can normally
be obtained with the [WB Auto] setting, but for
some subjects, you should try experimenting
with different settings. (This is especially true for
sunshade under a clear sky, mixed natural and
artificial light settings, and so on.)
“To remove the SD/SDHC/SDXC memory card”
(p. 14)
Image quality
“Taking sharper pictures”
● Taking pictures with the optical zoom
Avoid using digital zoom (p. 22, 49) to take
pictures.
● Taking pictures at a low ISO sensitivity
If the picture is taken with a high ISO sensitivity,
noise (small colored spots and color unevenness
that were not in the original image) can occur, and
the image can appear grainy. The resulting image
is grainier than with low ISO sensitivity as well.
“Selecting the ISO sensitivity” (p. 39)
Batteries
“Making batteries last longer”
● Avoid any of the following operations when not
actually taking pictures because they deplete
the battery power
● Repeatedly pressing the shutter button
halfway
● Repeatedly using the zoom
● Choosing the delay before the camera enters
sleep mode
[Sleep] (p. 62)
EN 75
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Camera care
The battery and USB-AC adapter
•
This camera uses one Olympus lithium ion battery
(LI-50B). No other type of batteries can be used.
Exterior
•
Wipe gently with a soft cloth. If the camera is very dirty,
soak the cloth in mild soapy water and wring well. Wipe
the camera with the damp cloth and then dry it with a
dry cloth. If you have used the camera at the beach,
use a cloth soaked in clean water and wrung well.
Caution:
There is a risk of explosion if the battery is replaced
with the incorrect battery type.
Dispose of the used battery following the instructions.
(p. 84)
Monitor
•
•
Power consumption by the camera varies depending on
which functions are used.
During the conditions described below, power is
consumed continuously and the battery becomes
exhausted quickly.
•
Wipe gently with a soft cloth.
Lens
•
Blow dust off the lens with a commercial blower, then
wipe gently with a lens cleaner.
•
•
The zoom is used repeatedly.
Battery/USB-AC adapter
The shutter button is pressed halfway repeatedly in
shooting mode, activating the auto focus.
A picture is displayed on the monitor for an extended
period of time.
•
Wipe gently with a soft, dry cloth.
Do not use strong solvents such as benzene or
alcohol, or chemically treated cloth.
•
•
The camera is connected to a computer or printer.
Mold may form on the lens surface if the lens is left
dirty.
•
•
Using an exhausted battery may cause the camera to
turn off without displaying the battery level warning.
The rechargeable battery is not fully charged at the time
of purchase. Use the supplied F-2AC USB-AC adapter
(hereafter referred to as USB-AC adapter) to charge the
battery before use.
When the included USB-AC adapter is used, charging
usually takes approximately 3 hours (varies on usage).
The supplied USB-AC adapter is for charging and
playback only. Do not take pictures while the USB-AC
adapter is connected to the camera.
The included USB-AC adapter is designed to be
used only with this camera. Other cameras cannot be
charged with this USB-AC adapter.
Do not use with other devices.
For plug-in type USB-AC adapter:
Storage
•
When storing the camera for extended periods, remove
the battery, USB-AC adapter and card, and keep in a
cool, dry place that is well ventilated.
Periodically insert the battery and test the camera
functions.
•
•
•
Avoid leaving the camera in places where chemical
products are handled since this may result in
corrosion.
•
•
The included USB-AC adapter is intended to be
correctly orientated in a vertical or floor mount position.
76 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the camera to a computer
Using an SD/SDHC/SDXC memory card
The battery can be charged by connecting the camera to
a computer.
A card (and internal memory) also corresponds to the
film that records images in a film camera. Otherwise, the
recorded images (data) can be erased, and retouching is
also available with the use of a computer. Cards can be
removed from the camera and exchanged, but this is not
possible with the internal memory. Use of larger capacity
cards enables you to take more pictures.
Using an optional USB-AC adapter
An F-3AC USB-AC adapter (available separately) is
recommended if the camera will be used for extended
periods.
SD/SDHCC/SDXXC card wriite-proteect swwitch
Note that the power cable supplied with the USB-AC
adapter is for use exclusively with the USB-AC adapter.
Do not use with other devices.
The SD/SDHC/SDXC card body has a write-protect
switch. If you set the switch to the “LOCK” side, you will
not be able to write to the card, delete data or format.
Release the switch to enable writing.
Using your USB-AC adapter abroad
•
The USB-AC adapter can be used in most home
electrical sources within the range of 100 V to 240 V AC
(50/60Hz) around the world. However, depending on the
country or area you are in, the AC wall outlet may be
shaped differently and the USB-AC adapter may require
a plug adapter to match the wall outlet. For details, ask
at your local electrical shop or travel agent.
LOCK
•
Do not use travel voltage converters as they could
damage your USB-AC adapter.
Cards compatible with this camera
SD/SDHC/SDXC memory cards (visit the Olympus
website for information on memory cards that have been
tested and approved for use)
EN 77
Download from Www.Somanuals.com. All Manuals Search And Download.
Using a new card
Readout/recording process of the card
Cards must be formatted with this camera before first use
or after being used with other cameras or computers.
[Memory Format]/[Format] (p. 57)
During shooting, the media access icon blinks red while
the camera is recording data. Never open the battery/card
compartment cover or unplug the USB cable. This can not
only damage the image data but also render the internal
memory or card unusable.
Checking the image saving location
The memory indicator shows whether the internal memory
Blinks red
or card is being used during shooting and playback.
ON
Current memory indicator
v: Internal memory is being used
w: Card is being used
ISO
AUTO
-
2.0
h
WB
AUTO
OFF
4:3
AF
Current memory
indicator
L
N
HD
01:02:03
1
P
1/100 F5.0 +2.0
ON
ISO
AUTO
-
2.0
h
WB
AUTO
OFF
4:3
AF
L
N
4/30
HD
01:02:03
1
P
1/100 F5.0 +2.0
Shooting mode
’11/02/26 12:30
Playback mode
Even if [Memory Format]/[Format], [Erase], [Sel.
Image], or [All Erase] is performed, the data in the
card is not completely erased. When disposing of the
card, damage the card to prevent the disclosure of
personal data.
78 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Number of storable pictures (still images)/Continuous recording length (movies) in the
internal memory and SD/SDHC/SDDXC memorry cards
The figures for the number of storable still pictures and continuous recording length are approximate. The actual
capacity varies with shooting conditions and the card used.
Still images
Number of storable still pictures
Image size
Internal memory
SD/SDHC/SDXC memory card (1 GB)
RAW
4
9
70
173
305
776
2,753
42
YF
YN
17
44
162
2
XN
WN
YF+RAW
YN+RAW
XN+RAW
WN+RAW
2
47
3
52
3
54
Movies
Continuous recording length
Frame size
Internal memory
SD/SDHC/SDXC memory card (1 GB)
With sound
Without sound
12 sec.
With sound
3 min. 26 sec.
6 min. 37 sec.
Without sound
3 min. 34 sec.
7 min. 7 sec.
HD Quality 1280×720
11 sec.
22 sec.
SD Quality 640×480
24 sec.
The maximum file size of a single movie is 2 GB, regardless of the capacity of the card.
Increasing the number of pictures that can be taken
Either erase unwanted images, or connect the camera to a computer or other device to save the images, and then erase
the images in the internal memory or card.
[Erase] (p. 25, 55), [Sel. Image] (p. 55), [All Erase] (p. 55), [Memory Format]/[Format] (p. 57)
EN 79
Download from Www.Somanuals.com. All Manuals Search And Download.
Using an electronic view finder (sold separately)
An electronic view finder (sold separately: VF-2) can be used as a shooting display. This is convenient when you are in a
very bright location, such as under direct sunlight, where it is difficult to view the monitor, or are using the camera at a low
angle. The electronic viewfinder attaches to the camera hot shoe and accessory port.
Using a dedicated flash unit (sold separately)
This camera supports optional external flash units, which can supply a variety of different types of flash lighting according
to your needs. External flash units can communicate with the camera for a rich variety of flash control modes, including
TTL-AUTO. Flash units designed exclusively for use with OLYMPUS cameras attach directly to the camera’s hot shoe.
Flash units can also be mounted on a flash bracket using a bracket cable (sold separately). Additional information is
available in the manual provided with the flash unit.
Functions available with external flassh units
Optional flash
FL-36R
FL-20
FL-14
Flash control mode
TTL-AUTO, MANUAL
GN (Guide number)
(ISO100)
GN36 (85mm*1
GN20 (24mm*1
)
)
GN20 (35mm*1
–
)
GN14 (28mm*1
–
)
RC mode
D
*1
The focal length of the lens that can be used (35 mm film camera equivalent).
The built-in flash can not be used when an external flash is connected.
Wireless remote control flash photography
External flash units that offer a remote control mode and are designated for use with this camera can be used for
wireless flash photography. The built-in flash can control up to three groups of flash units independently. See the
documentation provided with the external flash units for details.
Third-parrty flash units
Observe the following precautions when mounting an external flash unit not designated for use with this camera on the
camera hot shoe:
•
Using obsolete flash units that apply the voltages of 24V or over to the camera hot shoe X-contact will damage the
camera.
•
•
Connecting flash units with signal contacts that do not conform to Olympus specifications may damage the camera.
Use only with the camera in shooting mode M and an option other than [ISO Auto] selected for ISO.
80 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
Flash control can only be performed by manually setting the flash to the ISO sensitivity and aperture values selected
with the camera. Flash brightness can be adjusted by adjusting either ISO sensitivity or aperture.
Use a flash with an angle of illumination suited to the lens. Angle of illumination is usually expressed using 35-mm
format equivalent focal lengths.
Conversion lens (sold separately)
Conversion lens
Conversion lens adapter
CLA-12
TCON-17
Microphone set (SEMA-1) (sold separately)
Produces higher-quality recordings than the camera’s built-in microphone. The microphone can be placed at a distance
from the camera to avoid recording ambient sounds or wind noise. Third-party commercial microphones can also be
used depending on your creative intent (power supplied via φ3.5mm stereo mini-plug). The microphone set attaches to
the camera hot shoe and accessory port.
Microphones connected directly to the microphone adapter will cast shadows in photographs taken using the
camera’s built-in flash. This can be prevented by connecting the microphone using the supplied microphone cable.
Remote cable (RM-UC1) (sold separately)
Use when the slightest camera movement can result in blurred pictures, for example for macro or bulb photography. The
remote cable attaches via the camera multi-connector.
Water-resistant protector (PT-050) (sold separately)
Use when taking photographs under water.
“To take underwater photos” (p. 32), “To lock the focus distance for underwater shoots (AF lock)” (p. 32),
[Underwater] (p. 40)
EN 81
Download from Www.Somanuals.com. All Manuals Search And Download.
Location — To avoid damage to the product, mount the product
securely on a stable tripod, stand, or bracket.
Power Source — Connect this product only to the power
source described on the product label.
Lightning — If a lightning storm occurs while using a USB-AC
adapter, remove it from the wall outlet immediately.
Foreign Objects — To avoid personal injury, never insert a
metal object into the product.
Heat — Never use or store this product near any heat source
such as a radiator, heat register, stove, or any type of
equipment or appliance that generates heat, including stereo
amplifiers.
SAFETY PRECAUTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRICAL
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED OLYMPUS SERVICE
PERSONNEL.
Handling the Camera
An exclamation mark enclosed in a
triangle alerts you to important operating
and maintenance instructions in the
documentation provided with the product.
WARNING
• Do not use the camera near flammable or explosive gases.
• Do not use the flash and LED (such as the AF illuminator)
on people (infants, small children, etc.) at close range.
• You must be at least 1 m (3 ft.) away from the faces of your
subjects. Firing the flash too close to the subject’s eyes could
cause a momentary loss of vision.
• Keep young children and infants away from the camera.
• Always use and store the camera out of the reach of young
children and infants to prevent the following dangerous
situations which could cause serious injury:
• Becoming entangled in the camera strap, causing
strangulation.
• Accidentally swallowing the battery, cards or other small
parts.
• Accidentally firing the flash into their own eyes or those of
another child.
• Accidentally being injured by the moving parts of the
camera.
• Do not look at the sun or strong lights with the camera.
• Do not use or store the camera in dusty or humid places.
• Do not cover the flash with a hand while firing.
• Use SD/SDHC/SDXC memory cards only. Never use other
types of cards.
If you accidently insert another type of card into the camera,
contact an authorized distributor or service center. Do not try to
remove the card by force.
DANGER
If the product is used without observing
the information given under this symbol,
serious injury or death may result.
WARNING If the product is used without observing
the information given under this symbol,
injury or death may result.
CAUTION
If the product is used without observing
the information given under this symbol,
minor personal injury, damage to the
equipment, or loss of valuable data may
result.
WARNING!
TO AVOID THE RISK OF FIRE OR ELECTRICAL SHOCK,
NEVER DISASSEMBLE, EXPOSE THIS PRODUCT
TO WATER OR OPERATE IN A HIGH HUMIDITY
ENVIRONMENT.
General Precautions
Read All Instructions — Before you use the product, read all
operating instructions. Save all manuals and documentation
for future reference.
Cleaning — Always unplug this product from the wall outlet
before cleaning. Use only a damp cloth for cleaning. Never
use any type of liquid or aerosol cleaner, or any type of
organic solvent to clean this product.
CAUTION
• Stop using the camera immediately if you notice any
unusual odors, noise, or smoke around it.
• Never remove the batteries with bare hands, which may
cause a fire or burn your hands.
Attachments — For your safety, and to avoid damaging the
product, use only accessories recommended by Olympus.
Water and Moisture — For precautions on products with
weatherproof designs, read the weatherproofing sections.
82 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
• Never hold or operate the camera with wet hands.
• Do not leave the camera in places where it may be subject
to extremely high temperatures.
• Always store batteries out of the reach of small children. If a
child accidentally swallows a battery, seek medical attention
immediately.
• Doing so may cause parts to deteriorate and, in some
circumstances, cause the camera to catch fire.
Do not use the USB-AC adapter if it is covered (such as a
blanket). This could cause overheating, resulting in fire.
• Handle the camera with care to avoid getting a low-
temperature burn.
WARNING
• Keep batteries dry at all times.
• To prevent batteries from leaking, overheating, or causing a
fire or explosion, use only batteries recommended for use with
this product.
• When the camera contains metal parts, overheating can
result in a low-temperature burn. Pay attention to the
following:
• When used for a long period, the camera will get hot. If you
hold on to the camera in this state, a low-temperature burn
may be caused.
• In places subject to extremely cold temperatures, the
temperature of the camera’s body may be lower than the
environmental temperature. If possible, wear gloves when
handling the camera in cold temperatures.
• Insert the battery carefully as described in the operating
instructions.
• If rechargeable batteries have not been recharged within the
specified time, stop charging them and do not use them.
• Do not use a battery if it is cracked or broken.
• If a battery leaks, becomes discolored or deformed, or
becomes abnormal in any other way during operation, stop
using the camera.
• If a battery leaks fluid onto your clothing or skin, remove the
clothing and flush the affected area with clean, running cold
water immediately. If the fluid burns your skin, seek medical
attention immediately.
• Be careful with the strap.
• Be careful with the strap when you carry the camera. It could
easily catch on stray objects and cause serious damage.
• Never subject batteries to strong shocks or continuous
vibration.
Battery Handling Precautions
CAUTION
Follow these important guidelines to prevent batteries
from leaking, overheating, burning, exploding, or causing
electrical shocks or burns.
• Before loading, always inspect the battery carefully for leaks,
discoloration, warping, or any other abnormality.
• The battery may become hot during prolonged use. To avoid
minor burns, do not remove it immediately after using the
camera.
DANGER
• Always unload the battery from the camera before storing the
camera for a long period.
• The camera uses a lithium ion battery specified by Olympus.
Charge the battery with the specified USB-AC adapter. Do not
use any other USB-AC adapters.
Caution for Usage Environment
• Never heat or incinerate batteries.
• Take precautions when carrying or storing batteries to prevent
them from coming into contact with any metal objects such as
jewelry, pins, fasteners, etc.
• Never store batteries where they will be exposed to direct
sunlight, or subjected to high temperatures in a hot vehicle,
near a heat source, etc.
• To prevent causing battery leaks or damaging their terminals,
carefully follow all instructions regarding the use of batteries.
Never attempt to disassemble a battery or modify it in any
way, solder, etc.
• If battery fluid gets into your eyes, flush your eyes immediately
with clear, cold running water and seek medical attention
immediately.
• To protect the high-precision technology contained in this
product, never leave the camera in the places listed below, no
matter if in use or storage:
• Places where temperatures and/or humidity are high or go
through extreme changes. Direct sunlight, beaches, locked
cars, or near other heat sources (stove, radiator, etc.) or
humidifiers.
• In sandy or dusty environments.
• Near flammable items or explosives.
• In wet places, such as bathrooms or in the rain. When using
products with weatherproof designs, read their manuals
as well.
• In places prone to strong vibrations.
EN 83
Download from Www.Somanuals.com. All Manuals Search And Download.
• Never drop the camera or subject it to severe shocks or
vibrations.
• When mounted on a tripod, adjust the position of the camera
with the tripod head. Do not twist the camera.
• Static images displayed on organic EL monitors for extended
periods of time may “burn in”, causing a drop in brightness
or discoloration in some areas of the display, which may be
permanent in some cases. This phenomenon has no effect on
images recorded with the camera.
• Do not touch electric contacts on cameras.
• Do not leave the camera pointed directly at the sun. This may
cause lens or shutter curtain damage, color failure, ghosting on
the CCD, or may possibly cause fires.
• A strip of light may appear on the top/bottom of the monitor, but
this is not a malfunction.
• When a subject is viewed diagonally in the camera, the
edges may appear zigzagged on the monitor. This is not a
malfunction; it will be less noticeable in playback mode.
• Although the monitor is manufactured using high-precision
technology, some pixels may always be lit or may never light,
and color and brightness may vary with the viewing angle.
This is normal for this type of monitor and does not indicate a
malfunction; images recorded with the camera are unaffected.
• Do not push or pull severely on the lens.
• Before storing the camera for a long period, remove the
batteries. Select a cool, dry location for storage to prevent
condensation or mold from forming inside the camera. After
storage, test the camera by turning it on and pressing the
shutter button to make sure that it is operating normally.
• The camera may malfunction if it is used in a location where
it is subject to a magnetic/electromagnetic field, radio waves,
or high voltage, such as near a TV set, microwave, video
game, loud speakers, large monitor unit, TV/radio tower, or
transmission towers. In such cases, turn the camera off and on
again before further operation.
Legal and Other Notices
• Olympus makes no representations or warranties regarding
any damages, or benefit expected by using this unit lawfully,
or any request from a third person, which are caused by the
inappropriate use of this product.
• Olympus makes no representations or warranties regarding
any damages or any benefit expected by using this unit
lawfully which are caused by erasing picture data.
• Always observe the operating environment restrictions
described in the camera’s manual.
Battery Handling Precautions
• This camera uses a lithium ion battery specified by Olympus.
Do not use any other type of battery.
If the battery’s terminals get wet or greasy, camera contact failure
may result. Wipe the battery well with a dry cloth before use.
• Always charge a battery when using it for the first time, or if it
has not been used for a long period.
• When operating the camera with battery power at low
temperatures, try to keep the camera and spare battery
as warm as possible. A battery that has run down at low
temperatures may be restored after it is warmed at room
temperature.
• The number of pictures you can take may vary depending on
the shooting conditions or battery.
• Before going on a long trip, and especially before traveling
abroad, purchase extra batteries. A recommended battery may
be difficult to obtain while traveling.
Disclaimer of Warranty
•
• Olympus makes no representations or warranties, either
expressed or implied, by or concerning any content of these
written materials or software, and in no event shall be liable
for any implied warranty of merchantability or fitness for any
particular purpose or for any consequential, incidental or
indirect damages (including but not limited to damages for loss
of business profits, business interruption and loss of business
information) arising from the use or inability to use these
written materials or software or equipment. Some countries do
not allow the exclusion or limitation of liability for consequential
or incidental damages or of the implied warranty, so the above
limitations may not apply to you.
• Olympus reserves all rights to this manual.
• Please recycle batteries to help save our planet’s resources.
When you throw away dead batteries, be sure to cover their
terminals and always observe local laws and regulations.
Warning
Unauthorized photographing or use of copyrighted material
may violate applicable copyright laws. Olympus assumes no
responsibility for unauthorized photographing, use or other acts
that infringe upon the rights of copyright owners.
Monitor
• Do not push the monitor forcibly; otherwise the image may
become vague, resulting in a playback mode failure or damage
to the monitor.
84 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Use Only Dedicated Rechargeable Battery and
USB-AC adapter
Copyright Notice
All rights reserved. No part of these written materials or this
software may be reproduced or used in any form or by any
means, electronic or mechanical, including photocopying and
recording or the use of any type of information storage and
retrieval system, without the prior written permission of Olympus.
No liability is assumed with respect to the use of the information
contained in these written materials or software, or for damages
resulting from the use of the information contained therein.
Olympus reserves the right to alter the features and contents of
this publication or software without obligation or advance notice.
We strongly recommend that you use only the genuine Olympus
dedicated rechargeable battery and USB-AC adapter with this
camera. Using a non-Olympus rechargeable battery and/or
USB-AC adapter may result in fire or personal injury due to
leakage, heating, ignition or damage to the battery. Olympus
does not assume any liability for accidents or damage that may
result from the use of a battery and/or USB-AC adapter that are
not genuine Olympus accessories.
For customers in North and South America
FCC Notice
For customers in USA
Declaration of Conformity
• Radio and Television Interference
Changes or modifications not expressly approved by the
•
Model Number:
Trade Name:
XZ-1
OLYMPUS
manufacturer may void the user’s authority to operate this
equipment. This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
• This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications.
Responsible Party:
Address:
3500 Corporate Parkway, P.O. Box 610,
Center Valley, PA 18034-0610, U.S.A.
Telephone Number: 484-896-5000
Tested To Comply With FCC Standards
FOR HOME OR OFFICE USE
• However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of
the following measures:
This device complies with Part 15 of the FCC rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including
interference that may cause undesired operation.
• Adjust or relocate the receiving antenna.
For customers in Canada
This Class B digital apparatus complies with Canadian ICES-
003.
• Increase the distance between the camera and receiver.
• Connect the equipment to an outlet on a circuit different from
that to which the receiver is connected.
• Consult your dealer or an experienced radio/TV technician
for help. Only the OLYMPUS-supplied USB cable should
be used to connect the camera to USB enabled personal
computers (PC).
OLYMPUS WORLDWIDE LIMITED WARRANTY
- IMAGING PRODUCTS
Olympus warrants that the enclosed Olympus® imaging
product(s) and related Olympus® accessories (individually
a “Product” and collectively the “Products”) will be free from
defects in materials and workmanship under normal use and
service for a period of one (1) year from the date of purchase.
If any Product proves to be defective within the one-year
warranty period, the customer must return the defective Product
to any of Olympus Service Centers, following the procedure
set forth below (See “WHAT TO DO WHEN SERVICE IS
NEEDED”).
Any unauthorized changes or modifications to this equipment
would void the user’s authority to operate it.
EN 85
Download from Www.Somanuals.com. All Manuals Search And Download.
Olympus, at its sole discretion, will repair, replace, or adjust
the defective Product, provided that Olympus investigation and
factory inspection disclose that (a) such defect developed under
normal and proper use and (b) the Product is covered under this
limited warranty.
Repair, replacement, or adjustment of defective Products shall
be Olympus’s sole obligation and the customer’s sole remedy
hereunder.
EXCEPT FOR THE LIMITED WARRANTY SET FORTH
ABOVE, OLYMPUS MAKES NO AND DISCLAIMS ALL OTHER
REPRESENTATIONS, GUARANTIES, CONDITIONS, AND
WARRANTIES CONCERNING THE PRODUCTS, WHETHER
DIRECT OR INDIRECT, EXPRESS OR IMPLIED, OR ARISING
UNDER ANY STATUTE, ORDINANCE, COMMERCIAL USAGE
OR OTHERWISE, INCLUDING BUT NOT LIMITED TO ANY
WARRANTY OR REPRESENTATION AS TO THE SUITABILITY,
DURABILITY, DESIGN, OPERATION, OR CONDITON OF
THE PRODUCTS (OR ANY PART THEREOF) OR THE
MERCHANTABILITY OF THE PRODUCTS OR THEIR FITNESS
FOR A PARTICULAR PURPOSE, OR RELATING TO THE
INFRINGEMENT OF ANY PATENT, COPYRIGHT, OR OTHER
PROPRIETARY RIGHT USED OR INCLUDED THEREIN.
IF ANY IMPLIED WARRANTIES APPLY AS A MATTER OF
LAW, THEY ARE LIMITED IN DURATION TO THE LENGTH OF
THIS LIMITED WARRANTY.
The customer is liable and shall pay for shipment of the
Products to the Olympus Service Center.
Olympus shall not be obligated to perform preventive
maintenance, installation, deinstallation, or maintenance.
Olympus reserves the right to (i) use reconditioned, refurbished,
and/or serviceable used parts (that meet Olympus’s quality
assurance standards) for warranty or any other repairs and (ii)
make any internal or external design and/or feature changes
on or to its products without any liability to incorporate such
SOME STATES MAY NOT RECOGNIZE A DISCLAIMER OR
LIMITATION OF WARRANTIES AND/OR LIMITATION OF
LIABILITY SO THE ABOVE DISCLAIMERS AND EXCLUSIONS
MAY NOT APPLY.
THE CUSTOMER MAY ALSO HAVE DIFFERENT AND/OR
ADDITIONAL RIGHTS AND REMEDIES THAT VARY FROM
STATE TO STATE.
changes on or to the Products.
WHAT IS NOT COVERED BY THIS LIMITED
WARRANTY
Excluded from this limited warranty and not warranted by
Olympus in any fashion, either express, implied, or by statute,
are:
THE CUSTOMER ACKNOWLEDGES AND AGREES THAT
OLYMPUS SHALL NOT BE RESPONSIBLE FOR ANY
DAMAGES THAT THE CUSTOMER MAY INCUR FROM
DELAYED SHIPMENT, PRODUCT FAILURE, PRODUCT
DESIGN, SELECTION, OR PRODUCTION, IMAGE OR DATA
LOSS OR IMPAIRMENT OR FROM ANY OTHER CAUSE,
WHETHER LIABILITY IS ASSERTED IN CONTRACT, TORT
(INCLUDING NEGLIGENCE AND STRICT PRODUCT LIABILITY)
OR OTHERWISE. IN NO EVENT SHALL OLYMPUS BE LIABLE
FOR ANY INDIRECT, INCIDENTAL, CONSEQUENTIAL OR
SPECIAL DAMAGES OF ANY KIND (INCLUDING WITHOUT
LIMITATION LOSS OF PROFITS OR LOSS OF USE), WHETHER
OR NOT OLYMPUS SHALL BE OR SHOULD BE AWARE OF
THE POSSIBILITY OF SUCH POTENTIAL LOSS OR DAMAGE.
(a) products and accessories not manufactured by Olympus
and/or not bearing the “OLYMPUS” brand label (the
warranty coverage for products and accessories of other
manufacturers, which may be distributed by Olympus, is the
responsibility of the manufacturers of such products and
accessories in accordance with the terms and duration of
such manufacturers’ warranties);
(b) any Product which has been disassembled, repaired,
tampered with, altered, changed, or modified by persons
other than Olympus’s own authorized service personnel
unless repair by others is made with the written consent of
Olympus;
(c) defects or damage to the Products resulting from wear, tear,
misuse, abuse, negligence, sand, liquids, impact, improper
storage, nonperformance of scheduled operator and
maintenance items, battery leakage, use of non-“OLYMPUS”
brand accessories, consumables, or supplies, or use of the
Products in combination with non-compatible devices;
(d) software programs;
(e) supplies and consumables (including but not limited to
lamps, ink, paper, film, prints, negatives, cables and
batteries); and/or
Representations and warranties made by any person, including
but not limited to dealers, representatives, salespersons, or
agents of Olympus, which are inconsistent or in conflict with
or in addition to the terms of this limited warranty, shall not be
binding upon Olympus unless reduced to writing and approved
by an expressly authorized officer of Olympus.
This limited warranty is the complete and exclusive statement of
warranty which Olympus agrees to provide with respect to the
Products and it shall supersede all prior and contemporaneous
oral or written agreements, understandings, proposals, and
communications pertaining to the subject matter hereof.
(f) Products which do not contain a validly placed and recorded
Olympus serial number, unless they are a model on which
Olympus does not place and record serial numbers.
86 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
This limited warranty is exclusively for the benefit of the original
customer and cannot be transferred or assigned.
For customers in Europe
“CE” mark indicates that this product complies
with the European requirements for safety,
health, environment and customer protection.
“CE” mark cameras are intended for sales in
Europe.
WHAT TO DO WHEN SERVICE IS NEEDED
The customer must transfer any image or other data saved on
a Product to another image or data storage medium and/or
remove any film from the Product prior to sending the Product to
Olympus for service.
This symbol [crossed-out wheeled bin WEEE
Annex IV] indicates separate collection of waste
electrical and electronic equipment in the EU
countries.
Please do not throw the equipment into the
domestic refuse.
Please use the return and collection systems
available in your country for the disposal of
this product.
IN NO EVENT SHALL OLYMPUS BE RESPONSIBLE FOR
SAVING, KEEPING OR MAINTAINING ANY IMAGE OR DATA
SAVED ON A PRODUCT RECEIVED BY IT FOR SERVICE,
OR ON ANY FILM CONTAINED WITHIN A PRODUCT
RECEIVED BY IT FOR SERVICE, NOR SHALL OLYMPUS BE
RESPONSIBLE FOR ANY DAMAGES IN THE EVENT ANY
IMAGE OR DATA IS LOST OR IMPAIRED WHILE SERVICE IS
BEING PERFORMED (INCLUDING, WITHOUT LIMITATION,
DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL OR
SPECIAL DAMAGES, LOSS OF PROFITS OR LOSS OF USE),
WHETHER OR NOT OLYMPUS SHALL BE OR SHOULD BE
AWARE OF THE POSSIBILITY OF SUCH POTENTIAL LOSS
OR IMPAIRMENT.
This symbol [crossed-out wheeled bin
Directive 2006/66/EC Annex II] indicates
separate collection of waste batteries in the
EU countries.
Please do not throw the batteries into the
domestic refuse. Please use the return and
collection systems available in your country for
the disposal of the waste batteries.
Package the Product carefully using ample padding material to
prevent damage in transit and either deliver it to the Authorized
Olympus Dealer that sold you the Product or ship it postage
prepaid and insured to any of our Olympus Service Centers.
When returning Products for service, your package should
include the following:
Provisions of warranty
1
If this product proves to be defective, although it has been
used properly (in accordance with the written Handling
Care and Operating instructions supplied with it), during the
applicable national warranty period and has been purchased
from an authorized Olympus distributor within the business
area of Olympus Europa Holding GmbH as stipulated on
repaired, or at Olympus’s option replaced, free of charge.
To claim under this warranty the customer must take the
product before the end of the applicable national warranty
period to the dealer where the product was purchased or any
other Olympus service station within the business area of
Olympus Europa Holding GmbH as stipulated on the website:
World Wide Guarantee the customer may turn the product in
at any Olympus service station. Please notice that not in all
countries such Olympus service station exists.
1
2
Sales receipt showing date and place of purchase.
Copy of this limited warranty bearing the Product serial
number corresponding to the serial number on the
Product (unless it is a model on which Olympus does not
place and record serial numbers).
3
4
A detailed description of the problem.
Sample prints, negatives, digital prints (or files on disk) if
available and related to the problem.
When service is completed, the Product will be returned to you
postage prepaid.
WHERE TO SEND PRODUCT FOR SERVICE
See “WORLDWIDE WARRANTY” for the nearest service center.
INTERNATIONAL WARRANTY SERVICE
International warranty service is available under this warranty.
2
The customer shall transport the product to the dealer or
Olympus authorized service station at his own risk and shall
be responsible for any costs incurred in transporting the
product.
EN 87
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Olympus’s sole liability under this Guarantee shall be limited
to repairing or replacing the product. Any liability under the
Guarantee for indirect or consequential loss or damage of
any kind incurred or suffered by the customer due to a defect
of the product, and in particular any loss or damage caused
to any lenses, films, other equipment or accessories used
with the product or for any loss resulting from a delay in repair
or loss of data, is excluded. Compelling regulations by law
remain unaffected by this.
Provisions of Guarantee
1
“OLYMPUS IMAGING CORP., Shinjuku Monolith, 2-3-1
Nishi-Shinjuku, Shinjuku-ku, Tokyo 163-0914, Japan grants a
one year World Wide Guarantee. This worldwide Guarantee
must be presented at an Olympus authorized repair service
station before any repair can be made under conditions
of this Guarantee. This Guarantee is valid only if the
Guarantee Certificate and proof of purchase are presented
at the Olympus repair service station. Please note that this
Guarantee is in addition to and does not affect the customer’s
legal warranty rights under the applicable national legislation
governing the sale of consumer goods mentioned above.
This Guarantee does not cover the following and the
customer will be required to pay repair charge, even for
defects occurring within the Guarantee period referred to
above.
Notes regarding Guarantee maintenance
1
This Guarantee will only be valid if the Guarantee Certificate
is duly completed by Olympus or an authorized dealer or
other documents contain sufficient proof. Therefore, please
make sure that your name, the name of the dealer, the
serial number and the year, month and date of purchase
are all completed or the original invoice or the sales receipt
(indicating the dealer’s name, the date of purchase and
product type) is attached to this Guarantee Certificate.
Olympus reserves the right to refuse free-of-charge service
if neither Guarantee Certificate is completed nor the above
document is attached or if the information contained in it is
incomplete or illegible.
2
a. Any defect that occurs due to mishandling (such as an
operation performed that is not mentioned in the Handling
Care or other sections of the instructions, etc.)
b. Any defect that occurs due to repair, modification, cleaning,
etc. performed by anyone other than Olympus or an
Olympus authorized service station.
c. Any defect or damage that occurs due to transport, a fall,
shock, etc. after purchase of the product.
2
Since this Guarantee Certificate will not be re-issued, keep it
in a safe place.
d. Any defect or damage that occurs due to fire, earthquake,
flood damage, thunderbolt, other natural disasters,
environmental pollution and irregular voltage sources.
e. Any defect that occurs due to careless or improper
storage (such as keeping the product under conditions
of high temperature and humidity, near insect repellents
such as naphthalene or harmful drugs, etc.), improper
maintenance, etc.
f. Any defect that occurs due to exhausted batteries, etc.
g. Any defect that occurs due to sand, mud, etc. entering the
inside of the product casing.
h. When the Guarantee Certificate is not returned with the
product.
i. When any alterations whatsoever are made to the
Guarantee Certificate regarding the year, month and date
of purchase, the customer’s name, the dealer’s name, and
the serial number.
j. When proof of purchase is not presented with this
Guarantee Certificate.
This Guarantee applies to the product only; the Guarantee
does not apply to any other accessory equipment, such as
the case, strap, lens cap and batteries.
*
com for the authorized international Olympus service
network.
For customers in Asia
Provisions of warranty
1
lf this product proves to be defective, although it has been
used properly (in accordance with the written Handling Care
and Operating instructions supplied with it), during a period
of up to one year from the date of purchase this product
will be repaired, or at Olympus’s option replaced, free of
charge. To claim under warranty the customer must take the
product and this Warranty certificate before the end of the
one year warranty period to the dealer where the product was
purchased or any Olympus authorized service station listed in
the instructions and request the necessary repairs.
The customer shall transport the product to the dealer or
Olympus authorized service station at his own risk and shall
be responsible for any costs incurred in transporting the
product.
2
3
3
This warranty does not cover the following and the customer
will be required to pay repair charge, even for defects
occurring within the one year period referred to above.
88 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
a. Any defect that occurs due to mishandling (such as an
operation performed that is not mentioned in the Handling
Care or other sections of the instructions, etc.)
b. Any defect that occurs due to repair, modification, cleaning,
etc. performed by anyone other than Olympus or an
Olympus authorized service station.
Notes regarding warranty maintenance
1
This Warranty will only be valid if the Warranty Certificate is
duly completed by Olympus or the dealer. Make sure that
your name, the name of the dealer, the serial number and the
year, month and date of purchase are all completed.
Since this Warranty Certificate will not be re-issued, keep it in
a safe place.
Any request for repair by a customer in same country where
the product was purchased shall be subject to the terms
of the warranty issued by the Olympus distributor in that
country. Where the local Olympus distributor does not issue a
separate warranty or where the customer is not in the country
where the product was purchased the terms of this worldwide
warranty shall apply.
2
3
c. Any defect or damage that occurs due to transport, a falI,
shock, etc. after purchase of the product.
d. Any defect or damage that occurs due to fire, earthquake,
flood damage, thunderbolt, other natural disasters,
environmental pollution and irregular voltage sources.
e. Any defect that occurs due to careless or improper
storage (such as keeping the product under conditions
of high temperature and humidity, near insect repellents
such as naphthalene or harmful drugs, etc.), improper
maintenance, etc.
4
Where applicable, this Warranty is valid worldwide. The
Olympus authorized service stations listed in this Warranty
will gladly honor it.
f. Any defect that occurs due to exhausted batteries, etc.
g. Any defect that occurs due to sand, mud, etc. entering the
inside of the product casing.
*
Please refer to the appended list for the authorized
international Olympus service network.
h. When this Warranty Certificate is not returned with the
product.
Disclaimer of Warranty
i. When any alterations whatsoever are made to the
Warranty Certificate regarding the year, month and date of
purchase, the customer’s name, the dealer’s name, and
the serial number.
j. When proof of purchase is not presented with this
Warranty Certificate.
This Warranty applies to the product only; the Warranty does
not apply to any other accessory equipment, such as the
case, strap, lens cap and batteries.
Olympus’ sole liability under this warranty shall be limited to
repairing or replacing the product and any liability for indirect
or consequential loss or damage of any kind incurred or
suffered by the customer due to a defect in the product, and
in particular any loss or damage caused to any film or lenses
or other equipment or accessories used with the product or
for any loss resulting from delay in repair, is excluded.
Olympus makes no representations or warranties, either
expressed or implied, by or concerning any content if these
written materials or software, and in no event shall be liable
for any implied warranty of merchantability or fitness for any
particular purpose or for any consequential, incidental or
indirect damages (including but not limited to damages for loss
of business profits, business interruption and loss of business
information) arising from the use of inability to use these written
materials or software. Some states do not allow the exclusion or
limitation of liability for consequential or incidental damages, so
the above limitations may not apply to you.
4
5
Trademarks
• IBM is a registered trademark of International Business
Machines Corporation.
• Microsoft and Windows are registered trademarks of Microsoft
Corporation.
• Macintosh is a trademark of Apple Inc.
• SDHC/SDXC logo is a trademark.
Notes;
1
This Warranty is in addition to and does not affect the
customer’s statutory right.
• All other company and product names are registered
trademarks and/or trademarks of their respective owners.
• The standards for camera file systems referred to in this
manual are the “Design rule for Camera File system/DCF”
standards stipulated by the Japan Electronics and Information
Technology Industries Association (JEITA).
2
lf you have any queries regarding this Warranty, call any
of the Olympus authorized service stations listed in the
instructions.
EN 89
Download from Www.Somanuals.com. All Manuals Search And Download.
The software in this camera may include third party software.
Any third party software is subject to the terms and conditions,
imposed by the owners or licensors of that software, under
which such software is provided to you. Those terms and other
third party software notices, if any, may be found in the software
notice PDF file stored within the accompanying CD-ROM or at
notice/notice.cfm
90 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Camera
Product type
:
:
Digital camera (for shooting and displaying)
Recording system
Still pictures
Digital recording, JPEG (in accordance with Design rule for Camera File system
(DCF))
Applicable standards
Sound with still pictures
Movie
:
:
:
:
Exif 2.2, Digital Print Order Format (DPOF), PRINT Image Matching III, PictBridge
Wave format
AVI Motion JPEG
Memory
Internal memory
SD/SDHC/SDXC memory cards
No. of effective pixels
Image pickup device
Lens
:
:
:
10,000,000 pixels
1/1.6” CCD (primary color filter)
Olympus lens 6 to 24 mm, f1.8 to 2.5
(equivalent to 28 to 112 mm on a 35 mm camera)
ND filter
:
:
:
:
3EV equivalent
Photometric system
Shutter speed
Shooting range
Digital ESP, center-weighted, and spot metering using the camera image sensor
60 to 1/2000 sec., Bulb shooting
0.6 m (2.0 ft.) to (W), 0.6 m (2.0 ft.) to (T) (normal)
0.1 m (0.3 ft.) to (W), 0.3 m (1.0 ft.) to (T) (macro mode)
0.01 m (0.03 ft.) to 0.6 m (2.0 ft.) (super macro mode)
Monitor
:
:
3.0” organic EL display, 610,000 dots
Connector
USB/AV-out connector (multi-connector), HDMI micro connector (type D),
accessory port
Automatic calendar system
Operating environment
Temperature
:
:
2000 up to 2099
0 °C to 40 °C (32 °F to 104 °F) (operation)/
-20 °C to 60 °C (-4 °F to 140 °F) (storage)
Humidity
Power supply
Dimensions
:
:
:
30 % to 90 % (operation)/10 % to 90 % (storage)
One Olympus lithium ion battery (LI-50B)
110.6 mm (W) × 64.8 mm (H) × 42.3 mm (D)
(4.4 × 2.6 × 1.7 in.) (excluding protrusions)
Weight
:
275 g (9.7 oz) (including battery, card, and cap)
EN 91
Download from Www.Somanuals.com. All Manuals Search And Download.
Lithium ion battery (LI-50B)
Product type
:
:
:
:
Lithium ion rechargeable battery
DC 3.6 V
Standard voltage
Standard capacity
Battery life
925 mAh
Approx. 300 full charges (varies on usage)
Operating environment
Temperature
:
0°C to 40°C (32°F to 104°F) (charging)/
-10°C to 60°C (14°F to 140°F) (operation)/
-20°C to 35°C (-4°F to 95°F) (storage)
USB-AC adapter (F-2AC)
Model No.
:
F-2AC-1A/F-2AC-2A/F-2AC-1B/F-2AC-2B/F-2AC-1C/F-2AC-3C/F-2AC-4C/
F-2AC-5C
Power requirements
Output
:
:
AC 100 to 240 V (50/60 Hz)
F-2AC-1A/F-2AC-2A/F-2AC-1B/F-2AC-2B: DC 5 V, 500 mA
F-2AC-1C/F-2AC-3C/F-2AC-4C/F-2AC-5C: DC 5 V, 550 mA
Operating environment
Temperature
:
0 °C to 40 °C (32 °F to 104 °F) (operation)/
-20 °C to 60 °C (-4 °F to 140 °F) (storage)
Design and specifications subject to change without notice.
HDMI, the HDMI Logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of HDMI
Licensing LLC.
92 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
VR352601
Download from Www.Somanuals.com. All Manuals Search And Download.
|