Olympus Camcorder SP 610UZ User Manual

DIGITAL CAMERA  
SP-610UZ  
Instruction Manual  
Thank you for purchasing an Olympus digital camera. Before you start to use your new camera, please read these  
instructions carefully to enjoy optimum performance and a longer service life. Keep this manual in a safe place for  
future reference.  
We recommend that you take test shots to get accustomed to your camera before taking important photographs.  
In the interest of continually improving products, Olympus reserves the right to update or modify information  
contained in this manual.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Camera Settings  
Using the Direct Buttons  
Frequently used functions can be accessed using the direct buttons.  
Zoom lever (p. 21, 24)  
Shutter button (p. 20, 61)  
Movie record button (p. 20)  
qbutton (switching between  
shooting and playback) (p. 20,  
22, 47)  
m button (p. 6)  
E button (camera guide/  
menu guide) (p. 26)  
EN  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation guide  
Wheel controller  
The symbols FGHI displayed for image selections  
and settings indicate that the wheel controller is to  
be used by pressing, not turning, the wheel controller  
sections shown on the right.  
F (up) /  
INFO button (changing information  
display) (p. 22, 25)  
4/30  
X
Y
M
D
Time  
14M  
NORM  
Y/M/D  
2011.02.26 00:00  
FILE  
100 0004  
’11/02/26 00:00  
H (left)  
I (right)  
OK  
Print  
More  
MENU  
OK  
Set  
Single Print  
Cancel  
Operation guides displayed at the bottom of the screen  
indicate that the m button, A button, or zoom lever  
A button  
can be used.  
G (down) /  
1
D button (erase) (p. 24)  
Reset  
2
Image Size  
Compression  
Shadow Adjust  
AF Mode  
14M  
Normal  
Auto  
Instead of pressing FGHI, you can also turn the  
wheel controller to select an item, etc.  
1
2
3
Face/iESP  
ESP  
ESP/  
Digital Zoom  
Off  
5/30  
MENU  
OK  
Set  
Exit  
OK  
Set  
OK  
MENU  
Erase/Cancel  
Operation guide  
4
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Menu  
Use the menu to change camera settings such as the shooting mode.  
There may be menus that are unavailable depending on other related settings or the s mode (p. 28).  
Function menu  
Press H during shooting to display the function menu. The function menu is used to choose the shooting mode  
and provides access to frequently used shooting settings.  
Selected option  
Shooting mode  
Program Auto  
3D  
P
Function menu  
Setup menu  
0.0  
WB  
AUTO  
ISO  
AUTO  
14M  
NORM  
4
Shooting  
To select the shooting mode  
Use HI to select the shooting mode and press the A button.  
To select the function menu  
Use FG to select a menu and use HI to select a menu option. Press the A  
button to set the function menu.  
EN  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup menu  
Press the m button during shooting or playback to display the setup menu. The setup menu provides access  
to a variety of camera settings, including options not listed in the function menu, display options, and the time and  
date.  
1
Press the m button.  
The setup menu is displayed.  
4
Use FG to select the desired submenu 2  
and then press the A button.  
Once a setting is selected, the display returns to  
the previous screen.  
1
Reset  
2
Image Size  
14M  
Normal  
Auto  
Compression  
Shadow Adjust  
AF Mode  
There may be additional operations. “Menu  
Settings” (p. 38 to 54)  
1
2
3
Face/iESP  
ESP  
ESP/  
1
Digital Zoom  
Off  
Reset  
2
Image Size  
Compression  
Shadow Adjust  
AF Mode  
14M  
Normal  
Auto  
MENU  
OK  
Set  
Exit  
2
Press H to select the page tabs. Use FG  
to select the desired page tab and press I.  
1
2
3
Face/iESP  
ESP  
ESP/  
Digital Zoom  
MENU  
On  
Page tab  
Submenu 1  
OK  
Set  
Exit  
1
1
2
Reset  
Reset  
2
Image Size  
14M  
Normal  
Auto  
Image Size  
Compression  
Shadow Adjust  
AF Mode  
14M  
Normal  
Auto  
5
Press the m button to complete the  
setting.  
Compression  
Shadow Adjust  
AF Mode  
ESP/  
1
2
3
Face/iESP  
ESP  
1
2
3
Face/iESP  
ESP  
ESP/  
Digital Zoom  
MENU  
Off  
Digital Zoom  
Off  
OK  
MENU  
OK  
Set  
Exit  
Set  
Exit  
3
Use FG to select the desired submenu 1  
and then press the A button.  
Submenu 2  
1
2
1
Reset  
Reset  
Digital Zoom  
Image Size  
Compression  
Shadow Adjust  
AF Mode  
ESP/  
14M  
Normal  
Auto  
2
Image Size  
Compressio
Shadow Adju
AF Mode  
Off  
On  
1
2
3
1
2
3
Face/iESP  
ESP  
ESP/  
Digital Zoom  
MENU  
Off  
Digital Zoom  
OK  
MENU  
OK  
Set  
Exit  
Set  
Back  
6
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Menu Index  
Menus for Shooting Functions  
Program Auto  
1
1
2
3D  
P
9
Reset  
Image Size  
Compressio
Shadow Adju
AF Mode  
1
2
Image Stabilizer  
On  
2
3
4
5
6
7
8
AF Illuminat.  
1
2
Image Size  
720p  
Normal  
Off  
Rec View  
Image Quality  
1
2
3
Pic Orientati
Is Movie Mode  
ESP/  
0.0  
1
2
3
Icon Guide  
WB  
On  
Digital Zoom  
R
AUTO  
Date Stamp  
1
2
3
MENU  
Exit  
ISO  
AUTO  
MENU  
Exit  
0
14M  
NORM  
4
MENU  
OK  
Exit  
Set  
a
Pic Orientation..................p.42  
Icon Guide........................p.42  
Date Stamp ......................p.42  
1 Shooting mode  
8 Drive.................................p.37  
9 p (Shooting menu 1)  
P (Program Auto).............p.19  
M (iAUTO)...................p.28  
s (Scene Mode) .........p.28  
P (Magic Filter) ..........p.29  
p (Panorama)..................p.30  
W (3D Photo)..................p.32  
2 Flash.................................p.34  
3 Macro ...............................p.34  
4 Self-timer..........................p.35  
5 Exposure compensation...p.36  
6 White balance...................p.36  
7 ISO ...................................p.37  
Reset................................p.38  
Image Size .......................p.39  
Compression ....................p.39  
Shadow Adjust..................p.40  
AF Mode...........................p.40  
ESP/n ...........................p.40  
Digital Zoom .....................p.41  
0 q (Shooting menu 2)  
a A (Movie menu)  
Image Size .......................p.39  
Image Quality ...................p.39  
IS Movie Mode .................p.41  
R (Movie sound recording)  
......................................p.43  
Image Stabilizer................p.41  
AF Illuminat. ....................p.41  
Rec View ..........................p.42  
EN  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Menus for Playback, Editing, and Printing Functions  
1 q(Playback menu)  
Slideshow..................... p.44  
Photo Surng................ p.44  
Edit ............................... p.45  
Erase............................ p.46  
Print Order.................... p.47  
R (Protect).................... p.47  
y (Rotate).................... p.47  
1
Slideshow  
2
Photo Surfing  
Edit  
1
Erase  
1
2
3
Print Order  
R
y
MENU  
OK  
Set  
Exit  
Menus for Other Camera Settings  
File Name..................... p.50  
Pixel Mapping............... p.51  
s (Monitor)................ p.51  
TV Out.......................... p.51  
Power Save.................. p.53  
l (Language) ........... p.53  
3 t (Settings 3)  
X(Date/time)............. p.54  
World Time ................... p.54  
Data Repair .................. p.54  
1 r (Settings 1)  
Memory Format/  
1
2
Memory Format  
Backup  
Format ........................ p.48  
Backup ......................... p.48  
Eye-Fi........................... p.48  
USB Connection........... p.49  
qPower On ............... p.49  
Eye-Fi  
Off  
Storage  
Yes  
USB Connection  
q
1
2
3
Power On  
1
2
3
z
Keep Settings  
Pw On Setup  
MENU  
Yes  
On  
z
Keep Settings............ p.49  
Pw On Setup ................ p.49  
2 s (Settings 2)  
OK  
Exit  
Set  
Sound Settings............. p.50  
8
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Names of Parts  
Camera unit  
1
Self-timer lamp/  
2
3
AF illuminator........p. 35, 41  
Flash.............................p. 34  
Lens..............................p. 66  
Tripod socket  
Battery/card compartment  
lock .......................p. 13, 18  
Battery/card compartment  
cover.....................p. 13, 18  
Card slot.......................p. 18  
Speaker  
2
3
4
5
1
6
7
8
4
8
5
6
7
EN  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
2
3
Monitor .......p. 11, 19, 51, 61  
Strap eyelet ..................p. 13  
Movie record button......p. 20  
2
3
4 qbutton (switching between  
shooting and playback)  
4
1
........................p. 20, 22, 49  
5
6
7
8
5
6
A button (OK)................p. 4  
Wheel controller .............p. 4  
INFO button (changing  
information display)  
..............................p. 22, 25  
D button (erase) ..........p. 24  
E button  
(camera guide/menu guide)  
....................................p. 26  
m button ..............p. 4, 6  
Connector cover  
9
14  
15  
7
10  
11  
8
9
........................p. 15, 52, 55  
10 Multi-connector  
16  
........................p. 15, 52, 55  
11 HDMI micro connector  
....................................p. 52  
12 Microphone.............p. 43, 45  
13 Indicator lamp  
12  
13  
14 Zoom lever .............p. 21, 24  
15 Shutter button.........p. 20, 61  
16 n button........p. 17, 19  
10 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Monitor  
Shooting mode display  
1
2
3
Battery check..........p. 12, 62 15 Shadow Adjustment  
1
2
Shooting mode .......p. 19, 28  
Technology..................p. 40  
Flash.............................p. 34 16 Compression (still images)  
P
25  
24  
3
4
5
6
7
8
9
Flash standby/ash charge  
....................................p. 61 17 Image size (still images)  
Macro/super macro ......p. 34 ..............................p. 39, 69  
Self-timer......................p. 35 18 Number of storable still  
..............................p. 39, 69  
4
5
6
23  
22  
21  
0.0  
WB  
AUTO  
ISO  
AUTO  
Exposure compensation  
pictures (still images)  
00:34  
20  
....................................p. 36  
....................................p. 19  
14M  
DATE  
19  
4
NORM  
7
8
9
White balance...............p. 36 19 Current memory ...........p. 68  
ISO ...............................p. 37 20 Movie recording icon ....p. 20  
Drive.............................p. 37 21 Remaining recording time  
18 17 16 15 14 13 12 11 10  
1/100 F3.3  
10 Date stamp...................p. 42  
11 Recording with sound  
(movies)......................p. 20  
22 Image size (movies)  
27 26  
(movies)......................p. 43  
..............................p. 39, 70  
12 World time ....................p. 54 23 Histogram.....................p. 22  
13 Image stabilization (still  
images)/Digital image  
stabilization (movies)  
24 AF target mark..............p. 20  
25 Camera shake warning  
26 Aperture value..............p. 20  
....................................p. 41 27 Shutter speed...............p. 20  
14 Metering .......................p. 40  
EN 11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playback mode display  
1
2
3
Battery check..........p. 12, 62  
3D images ....................p. 26  
Print reservation/number of  
prints..................p. 59/p. 57  
Eye-Fi transferred.........p. 48  
Protect..........................p. 47  
Adding sound .........p. 43, 45  
Current memory ...........p. 68  
Frame number/total number  
of images (still images)  
....................................p. 22  
Elapsed time/total  
recording time (movies)  
....................................p. 23  
Volume ...................p. 23, 50  
Standard display  
1
2
3
4 5  
6
7
8
1
3D  
10  
4/30  
4
5
6
7
8
9
8
00:12/00:34  
’11/02/26 00:00  
19  
10  
Still image  
Movie  
Advanced display  
9
1
2
3
4 5  
6
7
8
11  
12 13 14  
10 Histogram.....................p. 22  
11 Shutter speed...............p. 20  
12 Aperture value..............p. 20  
13 ISO ...............................p. 37  
14 Exposure compensation  
....................................p. 36  
15 White balance...............p. 36  
16 Compression (still images)  
..............................p. 39, 69  
Image quality (movies)  
3D  
10  
4/30  
1/1000 F3.3  
2.0  
ISO WB  
21  
20  
15  
16  
17  
P
100 AUTO  
1/1000 F3.3  
2.0  
14M  
NORM  
ISO WB  
P
100 AUTO  
FILE  
14M  
18  
19  
NORM  
100 0004  
FILE  
100 0004  
’11/02/26 00:00  
’11/02/26 00:00  
..............................p. 39, 70  
17 Image size........p. 39, 69, 70  
18 File number  
19 Date and time.........p. 17, 54  
20 Shadow Adjustment  
Technology..................p. 40  
21 Shooting mode .......p. 19, 28  
12 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparing the Camera  
Attaching the camera strap and lens  
cap  
Inserting the battery  
1
2
1
2
3
Battery/card  
compartment  
lock  
3
4
Attach the strap to the other eyelet in the same manner.  
Slide the battery/card compartment lock from )to  
=and ensure that the battery/card compartment  
cover is securely locked (7). Failure to do so may  
cause the battery/card compartment cover to open  
during shooting and the batteries to fall out, resulting  
in loss of image data.  
5
For the types of batteries that can be used, see  
“Battery” (p. 66). If using rechargeable batteries,  
charge the batteries.  
Pull the strap tight so that it does not come loose.  
EN 13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Windows  
Turn off the camera before opening the battery/card  
compartment cover.  
Insert the supplied CD in a CD-ROM drive.  
1
When using the camera, be sure to close and lock  
the battery/card compartment cover.  
Windows XP  
A “Setup” dialog will be displayed.  
When to replace the batteries  
Replace the batteries when the error message shown  
below appears.  
Windows Vista/Windows 7  
An Autorun dialog will be displayed. Click “OLYMPUS  
Setup” to display the “Setup” dialog.  
Flashes in red  
Battery Empty  
00:34  
14M  
4
Monitor top left  
Error message  
Setting up using the supplied CD  
If the “Setup” dialog is not displayed, select “My  
Computer” (Windows XP) or “Computer” (Windows  
Vista/Windows 7) from the start menu. Double-click  
the CD-ROM (OLYMPUS Setup) icon to open the  
“OLYMPUS Setup” window and then double-click  
“Launcher.exe”.  
Connect the camera to the computer for set up using the  
supplied CD.  
User registration using the supplied CD and  
installation of ib computer software is available on  
Windows computers only.  
If a “User Account Control” dialog is displayed, click  
Yes” or “Continue”.  
We recommend that you use a computer equipped  
with Windows XP (Service Pack 2 or later), Windows  
Vista, or Windows 7.  
Follow the on-screen instructions on your  
computer.  
2
If nothing is displayed on the camera screen even  
after connecting the camera to the computer, the  
battery may be exhausted. In this case, disconnect  
the camera, and reconnect after replacing the battery  
with a new one.  
14 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting the camera  
Install OLYMPUS Viewer 2 and ib computer  
software.  
Check the system requirements before beginning  
4
Open the connector cover in the  
direction of the arrow.  
installation.  
Multi-connector  
Click the “OLYMPUS Viewer 2” or “OLYMPUS ib”  
button and follow the on-screen instructions to  
install the software.  
OLYMPUS Viewer 2  
Operating  
System  
Windows XP (Service Pack 2 or later)/  
Windows Vista/Windows 7  
USB cable (supplied)  
Processor  
Pentium 4 1.3 GHz or better  
1 GB or more (2 GB or more  
recommended)  
RAM  
Free Hard  
Drive Space  
1 GB or more  
1024 × 768 pixels or more  
Minimum 65,536 colors (16,770,000  
colors recommended)  
Monitor  
Settings  
ib  
Operating  
System  
Windows XP (Service Pack 2 or later)/  
Windows Vista/Windows 7  
Register your Olympus product.  
Click the “Registration” button and follow the on-  
screen instructions.  
3
Pentium 4 1.3 GHz or better  
(Pentium D 3.0 GHz or better required  
for movies)  
Processor  
512 MB or more (1 GB or more  
recommended)  
(1 GB or more required for movies—2 GB  
or more recommended)  
RAM  
Free Hard  
Drive Space  
1 GB or more  
1024 × 768 pixels or more  
Minimum 65,536 colors (16,770,000  
colors recommended)  
Monitor  
Settings  
A minimum of 64 MB video RAM with  
DirectX 9 or later  
Graphics  
*
See online help for information on using the software.  
EN 15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OLYMPUS Viewer 2  
Install the camera manual.  
Click the “Camera Instruction Manual” button and  
follow the on-screen instructions.  
5
Operating  
Mac OS X v10.4.11–v10.6  
System  
Processor  
Intel Core Solo/Duo 1.5 GHz or better  
Macintosh  
1 GB or more (2 GB or more  
recommended)  
RAM  
Insert the supplied CD in a CD-ROM drive.  
1
Free Hard  
Drive Space  
1 GB or more  
Double-click the CD (OLYMPUS Setup) icon on  
the desktop.  
1024 × 768 pixels or more  
Minimum 32,000 colors (16,770,000  
colors recommended)  
Double-click the “Setup” icon to display the “Setup”  
dialog.  
Monitor  
Settings  
*
Other languages can be selected from the language  
combo box. For information on using the software, see  
online help.  
Copy the camera manual.  
3
Click the “Camera Instruction Manual” button to  
open the folder containing the camera manuals.  
Copy the manual for your language to the  
computer.  
Date, time, time zone, and language  
The date and time set here are saved to image le names,  
date prints, and other data. You can also choose the  
language for the menus and messages displayed in the  
monitor.  
Install OLYMPUS Viewer 2.  
Check the system requirements before beginning  
installation.  
2
Click the “OLYMPUS Viewer 2” button and follow  
the on-screen instructions to install the software.  
You can make user registration via “Registration” in  
OLYMPUS Viewer 2 “Help”.  
16 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Press the n button to turn on the  
camera.  
The date and time setting screen is displayed when  
the date and time are not set.  
As in Steps 2 and 3, use FGHI and the  
A button to set [M] (month), [D] (day), [Time]  
(hours and minutes), and [Y/M/D] (date order).  
1
4
5
For precise time setting, press the A button as the  
time signal strikes 00 seconds.  
X
To change the date and time, adjust the setting from  
the menu. [X] (Date/time) (p. 54)  
Y
M
--  
D
Time  
Y/M/D  
----  
.
.
-- -- --  
:
Use HI to select the [x] time zone and  
then press the A button.  
Use FG to turn daylight saving time ([Summer])  
on or off.  
MENU  
Cancel  
Date and time setting screen  
’11.02.26 00:00  
Use FG to select the year for [Y].  
2
3
Seoul  
Tokyo  
X
Y
M
D
Time  
OK  
Set  
Summer  
Y/M/D  
2011. --  
.
-- -- --  
:
The menus can be used to change the selected time  
zone. [World Time] (p. 54)  
MENU  
Cancel  
Use FGHI to select your language and  
press the A button.  
6
Press I to save the setting for [Y].  
The menus can be used to change the selected  
X
language. [l] (p. 53)  
Y
M
D
Time  
Y/M/D  
2011.01. -- -- --  
:
MENU  
Cancel  
EN 17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To remove the SD/SDHC/SDXC memory  
card and Eye-Fi card  
Inserting an SD/SDHC/SDXC memory  
card or Eye-Fi card (commercially  
available)  
1
2
Always use SD/SDHC/SDXC memory cards or Eye-  
Fi cards with this camera. Do not insert other types of  
card.  
“Using an SD/SDHC/SDXC memory card or Eye-Fi  
card (commercially available)” (p. 67)  
The camera can shoot and store images using its  
internal memory, without using an SD/SDHC/SDXC  
memory card or Eye-Fi card.  
Press the card in until it clicks and comes out slightly,  
then remove the card.  
The illustrations of the following procedure show the  
SD memory card.  
1
Write-protect  
switch  
Insert the card straight until it clicks into place.  
Do not touch the contact area directly.  
2
“Number of storable pictures (still images)/Continuous  
recording length (movies) in the internal memory and  
SD/SDHC/SDXC memory cards” (p. 69, 70)  
18 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Shooting, Playback, aand Eraasing  
Shooting with the optimum aperture  
Current shooting mode display  
value and shutter speed (  
P
mode)  
Program Auto  
3D  
P
In this mode, automatic shooting settings are activated  
while also allowing changes to a wide range of  
other shooting menu functions, such as exposure  
compensation, white balance, etc. as needed.  
0.0  
WB  
AUTO  
ISO  
AUTO  
Remove the lens cap.  
1
2
14M  
MENU  
NORM  
4
Press the n button to turn on the  
camera.  
Press the n button again to turn off the camera.  
P mode indicator  
Hold the camera and compose the shot.  
3
P
Monitor  
0.0  
WB  
AUTO  
ISO  
AUTO  
00:34  
4
Horizontal grip  
14M  
Number of storable still pictures (p. 69)  
Monitor (standby mode screen)  
If P mode is not displayed, press H to display the  
function menu screen and then set the shooting  
mode to P. “Using the Menu” (p. 5)  
Vertical grip  
When holding the camera, take care not to cover the  
ash with your ngers, etc.  
EN 19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To view images during shooting  
Pressing the qbutton enables playback of images. To  
return to shooting, either press the qbutton or press the  
shutter button halfway down.  
Press the shutter button halfway down to  
focus on the subject.  
When the camera focuses on the subject, the  
exposure is locked (shutter speed and aperture  
value are displayed), and the AF target mark  
changes to green.  
4
Shooting movies  
The camera was unable to focus if the AF target  
mark ashes red. Try focusing again.  
Press the movie record button to start  
recording.  
1
AF target mark  
Continuous recording length  
(p. 70)  
P
Press halfway  
1/400 F3.5  
Shutter speed Aperture value  
00:34  
REC  
00:12  
“Focusing” (p. 63)  
Recording time  
To take the picture, gently press the shutter  
button all the way down while being careful  
not to shake the camera.  
Lights up red when recording  
5
Effects for the selected shooting mode can be used  
when shooting movies (when set to p mode, W  
mode, [Beauty] in s mode, or [Fish Eye] or  
P
P
P
[Sparkle] in  
mode).  
mode, shooting is performed in  
Sound will also be recorded.  
During sound recording, only the digital zoom can be  
used. To record a movie with optical zoom, set [R]  
(Movie sound recording) (p. 43) to [Off].  
Press fully  
1/400 F3.5  
Image review screen  
Press the movie record button again to stop  
recording.  
2
20 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[On] selected for [Digital Zoom]:  
Image size Zoom bar  
Using the zoom  
Turning the zoom lever adjusts the shooting range.  
W side  
T side  
14M  
Digital zoom range  
Image zoomed and  
cropped.*1  
Zoom bar  
Other  
P
P
Digital zoom range  
*1  
0.0  
0.0  
If [Image Size] is less than the full resolution, after  
reaching the maximum optical zoom, the camera will  
automatically resize and crop the image to the selected  
[Image Size], then enter the digital zoom range if [Digital  
Zoom] is [On].  
WB  
WB  
AUTO  
AUTO  
ISO  
ISO  
AUTO  
AUTO  
00:34  
14M  
4
00:34  
14M  
4
Optical zoom: 22×  
Digital zoom: 4×  
Photographs taken with the zoom bar displayed in  
red may appear “grainy.”  
To take larger images [Digital Zoom]  
Changing the shooting information  
display  
The type and amount of zoom can be identied from  
the appearance of the zoom bar. The display differs  
depending on the options selected for [Digital Zoom]  
(p. 41) and [Image Size] (p. 39).  
The display of the screen information can be changed to  
best match the situation, for example, the need for a clear  
view of the screen or for making a precise composition by  
using the grid display.  
[Off] selected for [Digital Zoom]:  
Image size  
Zoom bar  
14M  
Optical zoom range  
Other  
Image zoomed and cropped.*1  
EN 21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Viewing images  
Press F (INFO).  
1
The displayed shooting information changes in  
the order shown below each time the button is  
pressed. “Shooting mode display” (p. 11)  
Press the q button.  
1
Number of frames/  
Total number of images  
Normal  
P
4/30  
0.0  
WB  
No information  
AUTO  
ISO  
AUTO  
00:34  
14M  
4
P
’11/02/26 00:00  
Detailed  
Playback image  
P
Turn the wheel controller to select an image.  
It can be performed by pressing HI.  
2
0.0  
WB  
AUTO  
ISO  
AUTO  
00:34  
14M  
4
NORM  
Displays  
Displays next  
previous  
image  
image  
Reading a histogram  
If the peak lls too much of the frame, the  
image will appear mostly white.  
Keep turning the wheel controller to fast forward or  
reverse. It can be performed by holding HI.  
If the peak lls too much  
of the frame, the image  
will appear mostly black.  
The display size of the images can be changed.  
“Index view and close-up view” (p. 24)  
The green section shows  
luminance distribution within  
the screen’s center.  
22 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To play sound recordings  
To play sound recorded with an image, select the image  
and press the A button. A ! icon appears on images  
with which sound has been recorded.  
Press the A button to pause  
playback. During pause, fast  
forward or reverse, press the A  
button to restart playback.  
Pausing and  
restarting  
playback  
Press I to fast forward. Press I  
again to increase the fast forward  
speed.  
Fast forward  
Rewind  
Press H to rewind. The speed  
at which the recording rewinds  
increases each time H is pressed.  
Adjusting the  
volume  
Turn the wheel controller or use  
FG to adjust the volume.  
During audio playback  
Operations while playback is paused  
To adjust the volume, turn the wheel controller or use  
FG.  
To play back movies  
Select a movie, and press the A button.  
4/30  
00:14/00:34  
During pause  
Use F to display the rst frame  
and press G to display the last  
frame.  
Cueing  
OK  
Movie Play  
’11/02/26 00:00  
Movie  
Turn the wheel controller to  
Advancing and advance or rewind by one frame  
Operations during movie playback  
rewinding one  
at a time. Keep turning the wheel  
frame at a time*1 controller for continuous advance  
or rewind.  
Resuming  
playback  
Press the A button to resume  
playback.  
Elapsed time/  
00:12/00:34  
Total recording time  
During playback  
EN 23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To operate with HI  
*1  
Press I or H to advance or rewind one frame  
Single-image view  
Close-up view  
at a time. Hold I or H pressed for continuous  
advance or rewind.  
4/30  
4/30  
W
T
To stop movie playback  
Press the m button.  
’11/02/26 00:00  
’11/02/26 00:00  
Erasing images during playback  
(Single image erase)  
W
T
Display the image you want to erase and  
1
Index view  
press G ( ).  
D
’11/02/26  
Erase  
2
4
Erase  
Cancel  
Photo surng  
W
T
MENU  
OK  
Set  
Cancel  
ALL  
’11/02/26  
2011/  
02/26  
Press FG to select [Erase], and press the  
A button.  
2
4
W
2
35ºN  
139ºE  
For erasing multiple images at the same time, see  
“Erasing images [Erase]” (p. 46).  
When the movie is selected in the index view, the  
photo surng cannot be displayed even by turning the  
zoom lever to the W side.  
Index view and close-up view  
Index view enables quick selection of a desired image.  
Close-up view (up to 10x magnication) allows checking  
of image details.  
[Photo Surng] (p. 44)  
Turn the zoom lever.  
1
W side  
T side  
24 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To select an image in index view  
Use FGHI to select an image, and press the A  
button to display the selected image in single-image view.  
Playing back panorama images  
Panorama images that were combined together using  
[Auto] or [Manual] can be scrolled for viewing.  
To scroll an image in close-up view  
“Creating panoramic images (p mode)” (p. 30)  
Use FGHI to move the viewing area.  
Select a panorama image during playback.  
1
To stop photo surng  
“Viewing images” (p. 22)  
Use FG to select [ALL], and press the A button.  
4/30  
Changing the image information  
display  
Shooting information settings displayed on the screen can  
be changed.  
Press F (INFO).  
1
OK  
Replay  
’11/02/26 00:00  
The displayed image information changes in  
the order shown below each time the button is  
pressed.  
Press the A button.  
2
Normal  
3D  
10  
4/30  
No information  
’11/02/26 00:00  
Detailed  
Current viewing area  
3D  
10  
4/30  
To control panorama image playback  
Zoom in/Zoom out: Press the A button to pause  
playback. Then turn the zoom lever to enlarge/shrink the  
image.  
1/1000 F3.3  
2.0  
ISO WB  
P
100  
AUTO  
14M  
NORM  
FILE  
100 0004  
’11/02/26 00:00  
“Reading a histogram” (p. 22)  
EN 25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playback direction: Press the A button to pause  
playback. Then press FGHI to scroll the image in the  
direction of the pressed button.  
To start a slideshow, press the m button.  
To stop the slideshow, press the m or A button.  
3D images are composed of JPEG les and MP les.  
If any les are deleted on a computer, playback of 3D  
images may not be possible.  
Pause: Press the A button.  
Restart scrolling: Press the A button.  
Stop playback: Press the m button.  
Using the menu guide  
Playing back W images  
Pressing the E button in the setup menu displays a  
description of the current item.  
3D images shot with this camera can be played back on  
3D-compatible devices connected to this camera using an  
HDMI cable (sold separately).  
“Using the Menu” (p. 5)  
“Shooting 3D images (3D mode)” (p. 32)  
Using the camera guide  
When playing back 3D images, read the warnings in  
the instruction manual for the 3D-compatible devices  
carefully.  
Use the camera guide to look up camera operations.  
Press the E button in the standby mode  
screen or the playback screen.  
1
Connect the 3D-compatible device and  
camera using the HDMI cable.  
1
For the connection and setting method, see  
“Connection via HDMI cable” (p. 52)  
Search by  
purpose  
Search for a  
solution  
Search by  
situation  
Learn about the  
camera  
Use the wheel controller or FG to select [3D  
Show] and then press the A button.  
2
Search by  
keyword  
History  
Use the wheel controller or HI to select the  
3D image to play back and then press the A  
button.  
3
OK  
Set  
Exit  
MENU  
OK  
Set  
Slideshow  
26 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Submenu 2  
Search by  
purpose  
Application  
Functions or operating methods can  
be searched.  
Search for a  
solution  
A solution can be searched when  
having problems during operation.  
Search by  
situation  
Search from shooting/playback  
scene.  
Information is shown about  
recommended functions and basic  
operating methods for the camera.  
Learn about the  
camera  
Search by  
keyword  
Search from the camera keyword.  
Searches can be performed from the  
search history.  
History  
Use FGHI to select the desired item, and  
press the A button.  
2
Search by  
purpose  
Search for a  
solution  
Search by  
situation  
Learn about the  
camera  
Search by  
keyword  
History  
OK  
Set  
Exit  
Follow the on-screen instructions to search the  
desired contents.  
EN 27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using Shooting Modes  
To change the shooting mode  
Using the best mode for the shooting  
s
mode)  
s
P
,
M
p
,
W
)
P
The shooting mode (  
,
,
,
scene (  
can be changed using the function menu.  
“Using the Menu” (p. 5)  
s
Set the shooting mode to  
.
1
The default settings of the function are highlighted in  
.
Scene Mode  
Shooting with automatic settings  
(
M
mode)  
0.0  
The camera will automatically select the optimal shooting  
mode for the scene. This is a fully automatic mode that  
allows you to take a picture suited to the scene by simply  
pressing the shutter button. In M mode, some settings  
in the shooting menu may not be selected.  
WB  
AUTO  
14M  
MENU  
NORM  
4
Set the shooting mode to M.  
Press G to go to the submenu.  
1
2
3
The icon changes depending on the scene  
that the camera automatically selects.  
Portrait  
0.0  
WB  
AUTO  
14M  
MENU  
NORM  
4
00:34  
14M  
NORM  
4
Use HI to select the mode and then press  
the A button to set.  
In some cases, the camera may not select the  
desired shooting mode.  
There are some limitations on settings in M mode.  
When the camera cannot identify the optimal mode,  
P mode will be selected.  
0.0  
WB  
AUTO  
00:34  
14M  
4
Icon indicating the scene mode that  
is set  
28 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
s
In  
modes, the optimum shooting settings are  
Shooting with special effects  
pre-programmed for specic shooting scenes. For  
this reason, some settings cannot be changed in  
some modes.  
P
(
mode)  
To add expression to your photo, select the desired  
special effect.  
Option  
Application  
P
Set the shooting mode to  
.
1
BPortrait/VBeauty/FLandscape/  
GNight Scene*1  
/
Night+Portrait/  
M
The camera takes  
a picture using the  
optimum settings  
for the scene  
CSport/NIndoor/WCandle/  
Magic Filter  
*1  
R
S
Self Portrait/ Sunset  
/
XFireworks*1  
/
Cuisine/  
V
dDocuments/qBeach & Snow/  
UPet Mode - Cat/  
tPet Mode - Dog  
conditions.  
0.0  
WB  
AUTO  
*1  
When the subject is dark, noise reduction is  
automatically activated. This approximately doubles the  
shooting time during which no other pictures can be  
taken.  
14M  
MENU  
NORM  
4
Press G to go to the submenu.  
2
3
To take pictures of your pet’s face,  
select ([U Pet Mode - Cat]/[t Pet  
Mode - Dog])  
Use HI to select [U] or [t] and press the A  
button to set.  
Pop Art  
0.0  
WB  
[Auto Release] is automatically selected, and when  
the subject’s face is recognized, the picture is  
taken automatically.  
AUTO  
14M  
MENU  
NORM  
4
To cancel [Auto Release], see “Using the self-timer”  
(p. 35).  
Use HI to select the desired effect and then  
press the A button to set.  
0.0  
WB  
AUTO  
00:34  
14M  
4
Icon indicating P mode that is set  
EN 29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Shooting mode  
Option  
Submenu 1  
Application  
Three frames are taken and  
combined by the camera. Only  
compose the shots so that the target  
marks and pointers overlap, and  
the camera automatically releases  
the shutter.  
[Pop Art  
\Pin Hole  
]Fish Eye  
@Drawing*1  
;Soft Focus  
:Punk  
Auto  
Magic Filter  
XSparkle  
YWatercolor  
Three frames are taken and  
combined by the camera. Compose  
the shots using the guide frame and  
manually releases the shutter.  
Manual  
PC  
*1  
Two images are saved, an unmodied image and an  
image to which the effect has been applied.  
The frames that were taken are  
combined into a panorama image  
using the PC software.  
P
In  
mode, the optimum shooting settings are  
pre-programmed for each scene effect. For this  
reason, some settings cannot be changed in some  
modes.  
For details on installing the PC software, see “Setting  
up using the supplied CD” (p. 14).  
Creating panoramic images (p mode)  
When set to [Auto] or [Manual], [Image Size] (p. 39) is  
xed to [2].  
Set the shooting mode to p.  
1
The focus, exposure, zoom position (p. 21), and white  
balance (p. 36) are locked at the rst frame.  
Panorama  
3D  
The ash (p. 34) is xed to $(Flash Off) mode.  
AUTO  
Taking pictures with [Auto]  
1 Press the shutter button to take the rst frame.  
0.0  
WB  
AUTO  
2 Move the camera slightly in the direction of the second  
frame.  
2
M
MENU  
NORM  
4
AUTO  
Target mark  
Press G to go to the submenu.  
2
3
Use HI to select the desired mode and then  
press the A button to set.  
Pointer  
MENU  
OK  
Save  
Cancel  
Screen when combining images  
from left to right  
30 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3 Move the camera slowly while keeping it straight, and  
stop the camera where the pointer and target mark  
overlap.  
2 Press the shutter button to take the rst frame.  
Joint areas  
The camera releases the shutter automatically.  
MANUAL  
MANUAL  
AUTO  
1
2
MENU  
OK  
Save  
Cancel  
1st frame  
MENU  
OK  
Save  
Cancel  
3 Compose the next shot so that joint area 1 overlaps  
joint area 2.  
To combine only two pictures, press the A button  
before taking a third frame.  
4 Repeat Step 3to take a third frame.  
MANUAL  
After the third frame is taken, the camera  
automatically processes the frames and the  
combined panorama image is displayed.  
1
2
To exit the panorama function without saving an  
image, press the m button.  
If the shutter does not automatically release, try  
[Manual] or [PC].  
MENU  
OK  
Save  
Cancel  
Composition of the 2nd frame  
4 Press the shutter button to take the next shot.  
Taking pictures with [Manual]  
1 Use FGHI to specify at which edge the next  
picture is to be connected.  
To combine only two pictures, press the A button  
before taking the third frame.  
5 Repeat steps 3and 4to take a third frame.  
After the third frame is taken, the camera  
automatically processes the frames and the  
combined panorama image is displayed.  
MANUAL  
Direction for  
combining the next  
frame  
To exit the panorama function without saving an  
image, press the m button.  
OK  
Set  
EN 31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Taking pictures with [PC]  
1 Use FGHI to select the direction that the frames  
Shooting 3D images (W mode)  
In this mode, 3D images are shot for viewing on  
3D-compatible display devices.  
are combined.  
2 Press the shutter button to take the rst frame, and  
then compose the second shot.  
Images shot in 3D mode cannot be displayed in 3D  
on this camera’s monitor.  
Before rst shot  
Set the shooting mode to W.  
PC  
1
3D Photo  
3D  
P
AUTO  
OK  
Set  
14M  
MENU  
NORM  
4
After rst shot  
Press G to go to the submenu.  
PC  
2
3
Use HI to select [Auto] or [Manual] and  
then press the A button to set.  
1
2
Submenu 1  
Description  
MENU  
Exit  
After shooting the rst frame, overlap  
the subject with the image in the  
monitor. The next frame is taken  
automatically.  
After the rst shot, the area shown in white  
Auto  
reappears on the side of the display opposite the  
pan direction. Frame subsequent photographs so  
that they overlap with the image in the monitor.  
After shooting the rst frame, move  
the camera to overlap the subject  
with the image in the monitor. Then  
manually release the shutter.  
3 Repeat Step 2until the number of desired frames is  
taken, and then press the A button or m button  
when nished.  
Manual  
Panorama shooting is possible for up to 10 frames.  
Depending on the subject or the situation (if the  
distance between the camera and subject is too  
short), the image may not look 3D.  
Refer to the PC software help guide for details on  
how to make panorama images.  
The 3D viewing angle varies depending on the  
subject, etc.  
32 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Taking pictures with [Auto]  
1 Press the shutter button to shoot the rst frame.  
2 Overlap the subject with the image that is faintly  
displayed in the monitor.  
The picture is taken automatically.  
Taking pictures with [Manual]  
1 Press the shutter button to shoot the rst frame.  
2 Overlap the subject with the image that is faintly  
displayed in the monitor, and choose the position for  
the second frame.  
3 Press the shutter button to take the second shot.  
To exit 3D shooting mode without saving an image,  
press the m button.  
EN 33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using Shooting Functions  
“Using the Menu” (p. 5)  
Use HI to select the setting option, and  
press the A button to set.  
3
Using the ash  
Option  
Description  
The ash functions can be selected to best match the  
The ash res automatically in low-  
light or backlight conditions.  
shooting conditions.  
Flash Auto  
Redeye  
Lift up the ash unit manually.  
1
Pre-ashes are emitted to reduce  
the occurrence of red eye in your  
photos.  
The ash res regardless of the  
available light.  
Fill In  
Flash Off  
The ash does not re.  
Shooting closeups (Macro shooting)  
This function enables the camera to focus and shoot  
subjects at close distances.  
The ash settings cannot be adjusted with the ash  
closed.  
Select the macro option in the function menu.  
1
To turn off the ash  
Press the ash down back into the camera. This sets  
to $(Flash Off) mode.  
P
Select the ash option in the function menu.  
2
Off  
0.0  
WB  
AUTO  
P
ISO  
AUTO  
Flash Auto  
14M  
MENU  
NORM  
4
0.0  
WB  
AUTO  
ISO  
AUTO  
14M  
MENU  
NORM  
4
34 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Use HI to select the setting option, and  
press the A button to set.  
Use HI to select the setting option, and  
press the A button to set.  
2
2
Option  
Description  
Option  
Description  
Off  
Macro mode is deactivated.  
The self-timer is deactivated.  
YOff  
This enables shooting as close as  
15 cm/5.9 in.*1 (180 cm/70.8 in.*2) to  
the subject.  
The self-timer lamp turns on for  
approx. 10 seconds, then blinks for  
approx. 2 seconds, and then the  
picture is taken.  
Macro  
Y12 sec  
This enables shooting as close as  
1 cm/0.4 in. to the subject.  
Super Macro*3  
The self-timer lamp blinks for approx.  
2 seconds, then the picture is taken.  
Y2 sec  
*1  
*2  
*3  
When the zoom is at the widest (W) position.  
When the zoom is at the most telephoto (T) position.  
The zoom is automatically xed.  
When your pet (cat or dog) turns its  
head towards the camera, its face is  
recognized and the picture is taken  
automatically.  
$ Auto  
Release*1  
The ash (p. 34) and zoom (p. 21) cannot be set  
when [a Super Macro] (p. 35) is selected.  
*1  
[Auto Release] is displayed only when the s mode  
is [U] or [t].  
Using the self-timer  
Self-timer shooting is automatically canceled after  
one shot.  
After the shutter button is pressed all the way down, the  
picture is taken after a short delay.  
To cancel the self-timer after it starts  
Press the m button.  
Select the self-timer option in the function  
menu.  
1
P
Y Off  
2
12  
0.0  
WB  
AUTO  
ISO  
AUTO  
14M  
MENU  
NORM  
4
EN 35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting the brightness  
(Exposure compensation)  
Adjusting to a natural color scheme  
(White balance)  
The standard brightness (appropriate exposure) set by the  
camera based on the shooting mode (except for M)  
can be adjusted brighter or darker to obtain a desired shot.  
For more natural coloring, choose a white balance option  
suited to the scene.  
Select the white balance option in the  
function menu.  
1
Select the exposure compensation option in  
the function menu.  
1
WB  
WB Auto  
P
Exposure Comp.  
P
0.0  
0.0  
WB  
0.3 0.0 0.3  
AUTO  
ISO  
WB  
AUTO  
AUTO  
ISO  
AUTO  
14M  
MENU  
NORM  
4
14M  
MENU  
NORM  
4
Use HI to select the setting option, and  
press the A button to set.  
2
Use HI to select the desired brightness,  
and press the A button.  
2
Option  
Description  
The camera automatically adjusts  
WB Auto  
the white balance according to the  
shooting scene.  
For shooting outdoors under a  
clear sky.  
5
For shooting outdoors under a  
cloudy sky.  
3
1
For shooting under tungsten lighting.  
For shooting under white uorescent  
lighting (in an ofce, etc.)  
>
36 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Selecting the ISO sensitivity  
Sequential shooting (Drive)  
Pictures are taken sequentially while the shutter button  
is held down.  
Select the ISO setting option in the function  
menu.  
1
Select the drive option in the function menu.  
1
P
P
0.0  
WB  
AUTO  
0.0  
ISO  
1100  
ISO  
200  
ISO  
WB  
ISO 200  
400  
AUTO  
ISO  
AUTO  
MENU  
1/400 F3.3  
Sequential  
14M  
MENU  
NORM  
4
Use HI to select the setting option, and  
press the A button to set.  
2
Option  
Description  
One frame is shot each time the  
shutter button is pressed.  
o
Option  
Description  
Take sequential shots using the  
focus, brightness (exposure) and  
white balance set in the rst frame.  
The camera automatically adjusts  
the sensitivity according to the  
shooting scene.  
j*1  
ISO Auto  
The camera takes sequential shots  
at a faster speed than in [j].  
The camera uses a higher sensitivity  
compared to [ISO Auto] to minimize  
blur caused by a moving subject or  
by camera shake.  
c
d
High ISO Auto  
Value  
The camera takes sequential shots  
at approximately 10 frames/sec.  
The ISO sensitivity is xed to the  
selected value.  
*1  
The shooting speed varies depending on the settings  
for [Image Size/Compression] (p. 39).  
When set to [j], the ash (p. 34) cannot be set to  
[Redeye]. In addition, when set to [c] or [d], the  
ash is xed to [Flash Off].  
In the ISO setting, although smaller values result in  
less sensitivity, sharp images can be taken under fully  
lit conditions. Larger values result in higher sensitivity,  
and images can be taken at fast shutter speeds even  
under low light conditions. However, high sensitivity  
introduces noise into the resulting picture, which may  
give it a grainy appearance.  
When set to [c] or [d], [Image Size] is limited to  
[n] or lower (for [c]), or [3] or lower (for [d]),  
and the ISO sensitivity is xed to [ISO Auto].  
When set to [j] , [Image Size] cannot be set  
to [6]. Also, when set to [j] and [Image  
Size] is [4] or [K], [Fine] cannot be set for  
[Compression].  
EN 37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For information on using the menus, see “Setup menu” (p. 6).  
Menus for Shooting Functions  
The default settings of the function are highlighted in  
.
Restoring the shooting functions to the default settings [Reset]  
I (Shooting menu 1) X Reset  
Submenu 2  
Application  
Restores the following menu functions to the default settings.  
• Shooting mode (p. 28)  
• Flash (p. 34)  
• Macro (p. 34)  
• Self-timer (p. 35)  
• Exposure compensation (p. 36)  
• White balance (p. 36)  
Yes  
• ISO (p. 37)  
• Drive (p. 37)  
• Menu functions in [I, J, A] (p. 38 to 43)  
No  
The current settings will not be changed.  
38 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For information on using the menus, see “Setup menu” (p. 6).  
Selecting the image quality for still images [Image Size/Compression]  
I (Shooting menu 1) X Image Size/Compression  
Submenu 1  
Submenu 2  
14M (4288×3216)  
8M (3264×2448)  
5M (2560×1920)  
3M (2048×1536)  
2M (1600×1200)  
1M (1280×960)  
Application  
Suitable for printing pictures over A3 (11×17 in.).  
Suitable for printing pictures up to A3 (11×17 in.).  
Suitable for printing pictures at A4 (8.5×11 in.).  
Suitable for printing pictures up to A4 size (8.5×11 in.).  
Suitable for printing pictures at A5 (5×7 in.).  
Suitable for printing pictures at postcard size.  
Image Size  
Suitable for viewing pictures on a TV or using pictures on emails and web  
sites.  
VGA (640×480)  
Suitable for playing pictures on a widescreen TV and for printing on A3 or  
11"×17".  
16:9G (4288×2416)  
16:9F (1920×1080)  
Suitable for playing pictures on a widescreen TV and for printing on A5 or  
5"×7".  
Fine  
Shooting at high quality.  
Compression  
Normal  
Shooting at normal quality.  
“Number of storable pictures (still images)/Continuous recording length (movies) in the internal memory and SD/  
SDHC/SDXC memory cards” (p. 69, 70)  
Selecting the image quality for movies [Image Size/Image Quality]  
A (Movie menu) X Image Size/Image Quality  
Submenu 1  
Image Size  
Image Quality  
Submenu 2  
720p  
VGA (640×480)  
Application  
Select the image quality based on the image size and frame rate.  
Select [Fine] to shoot with higher image quality.  
QVGA (320×240)  
Fine/Normal  
“Number of storable pictures (still images)/Continuous recording length (movies) in the internal memory and SD/  
SDHC/SDXC memory cards” (p. 69, 70)  
When [Image Size] is set to [QVGA], [Image Quality] is xed to [Fine].  
EN 39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For information on using the menus, see “Setup menu” (p. 6).  
To focus on a moving subject  
continuously (AF Tracking)  
1 Hold the camera to align the AF target mark on the  
subject and press the A button.  
Brightening the subject against  
backlight [Shadow Adjust]  
I (Shooting menu 1) X Shadow Adjust  
2 When the camera recognizes the subject, the AF  
target mark automatically tracks the subject movement  
to focus on it continuously.  
Submenu 2  
Auto  
Application  
Automatically On when a compatible  
shooting mode is selected.  
3 To cancel the tracking, press the A button.  
Depending on the subjects or the shooting conditions,  
the camera may be unable to lock the focus or fail to  
track the subject movement.  
Off  
On  
The effect is not applied.  
Shoot with automatic adjustment to  
brighten an area that has become  
darker.  
When the camera fails to track the subject movement,  
the AF target mark changes to red.  
When set to [Auto] or [On], [ESP/n] (p. 40) is  
automatically xed to [ESP].  
Selecting the method for measuring the  
brightness [ESP/n]  
Selecting the focusing area [AF Mode]  
I (Shooting menu 1) X ESP/n  
I (Shooting menu 1) X AF Mode  
Submenu 2  
Application  
Submenu 2  
Application  
Shoots to obtain a balanced  
brightness over the entire screen  
(Meters the brightness at the center  
and surrounding areas of the screen  
separately).  
The camera focuses automatically.  
(If a face is detected, it is shown by  
a white frame*1; when the shutter  
button is pressed halfway and the  
camera focuses, the frame turns to  
green*2. If no face is detected, the  
camera chooses a subject in the  
frame and focuses automatically.)  
ESP  
Face/iESP*1  
Shoots the subject at the center  
during backlighting (Meters the  
brightness at the center of the  
screen).  
5 (spot)  
The camera focuses on the subject  
located within the AF target mark.  
Spot  
When set to [ESP], the center may appear dark when  
shooting against strong backlighting.  
The camera tracks the subject  
movement automatically to focus on  
it continuously.  
AF Tracking  
*1  
*2  
For some subjects, the frame may not appear or may  
take some time to appear.  
If the frame blinks in red, the camera cannot focus. Try  
refocusing on the subject.  
40 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For information on using the menus, see “Setup menu” (p. 6).  
Shooting at higher magnications than  
optical zoom [Digital Zoom]  
The camera’s default settings are [Image Stabilizer]  
(still images) to [On] and [IS Movie Mode] (movies) to  
[Off].  
I (Shooting menu 1) X Digital Zoom  
There may be a noise coming from inside the camera  
when the shutter button is pressed with [Image  
Stabilizer] (still images) set to [On].  
Submenu 2  
Application  
Disable digital zoom.  
Enable digital zoom.  
Images may not be stabilized if camera shake is too  
severe.  
Off  
On  
When the shutter speed is extremely slow, such as  
when taking pictures at night, [Image Stabilizer] (still  
images) may not be as effective.  
[Digital Zoom] is not available when [a Super  
Macro] (p. 35) is selected.  
When shooting while the [IS Movie Mode] (movies)  
is set to [On], the image will be enlarged somewhat  
before saving.  
The option selected for [Digital Zoom] affects the  
appearance of the zoom bar.  
To take larger images” (p. 21)  
Using the AF illuminator to focus on a  
shadowy subject [AF Illuminat.]  
Reducing the blur caused by the  
camera shake when shooting  
[Image Stabilizer] (still images)/  
[IS Movie Mode] (movies)  
J (Shooting menu 2) X AF Illuminat.  
Submenu 2  
Application  
J (Shooting menu 2) X  
Image Stabilizer (still images)/  
A (Movie menu) X  
Off  
On  
The AF illuminator is not used.  
When the shutter button is pressed  
halfway down, the AF illuminator  
turns on to aid focusing.  
IS Movie Mode (movies)  
Submenu 2  
Application  
The image stabilizer is deactivated.  
This is recommended for shooting  
when the camera is xed in place on  
a tripod or other stable surface.  
AF illuminator  
Off  
On  
The image stabilizer is activated.  
EN 41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For information on using the menus, see “Setup menu” (p. 6).  
Viewing the image immediately after  
Displaying icon guides [Icon Guide]  
shooting [Rec View]  
J (Shooting menu 2) X Icon Guide  
J (Shooting menu 2) X Rec View  
Submenu 2  
Application  
Submenu 2  
Application  
Off  
On  
No icon guide is displayed.  
The image being recorded is not  
displayed. This allows the user  
to prepare for the next shot while  
following the subject in the monitor  
after shooting.  
The explanation of the selected icon  
will be displayed when a shooting  
mode or function menu icon is  
selected (position the cursor on  
the icon for a while to display the  
explanation).  
Off  
On  
The image being recorded is  
displayed. This allows the user to  
make a brief check of the image that  
was just taken.  
Program Auto  
3D P  
Functions can be changed  
Icon guide  
manually.  
0.0  
Automatically rotating images shot with  
the camera in a vertical position during  
playback [Pic Orientation]  
WB  
AUTO  
ISO  
AUTO  
14M  
MENU  
NORM  
4
J (Shooting menu 2) X Pic Orientation  
Imprinting the date of recording  
[Date Stamp]  
During shooting, the [y] (p. 47) setting on the  
playback menu is set automatically.  
This function may not work properly if the camera is  
facing up or down during shooting.  
J (Shooting menu 2) X Date Stamp  
Submenu 2  
Application  
Submenu 2  
Application  
Off  
On  
Do not imprint the date.  
Information about the vertical/  
horizontal orientation of the camera  
during shooting is not recorded with  
images. Images shot with the camera  
in a vertical position are not rotated  
during playback.  
Stamp new photographs with the  
date of recording.  
Off  
On  
If the date and time are not set, the [Date Stamp]  
setting cannot be set.  
“Date, time, time zone, and language” (p. 16)  
Information about the vertical/  
horizontal orientation of the camera  
during shooting is recorded with  
images. Images are automatically  
rotated during playback.  
The date stamp cannot be deleted.  
[Date Stamp] is not available in [Panorama] or [3D  
Photo] mode.  
The date stamp cannot be imprinted when taking  
sequential shots.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
42 EN  
For information on using the menus, see “Setup menu” (p. 6).  
Recording sound when shooting  
movies [R]  
A (Movie menu) X R  
Submenu 2  
Application  
No sound is recorded.  
Sound is recorded.  
Off  
On  
When set to [On], only the digital zoom can be used  
during movie recording. To record the movie with the  
optical zoom, set [R] (movie sound recording) to [Off].  
EN 43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For information on using the menus, see “Setup menu” (p. 6).  
Menus for Playback, Editing, and Printing Functions  
The default settings of the function are highlighted in  
.
Searching for images and playing back  
the related images [Photo Surng]  
Data must be created with the ib (PC software) before  
using some functions.  
q(Playback menu) X Photo Surng  
In [Photo Surng], images can be searched and related  
images can be played back by selecting the related items.  
Refer to the ib (PC software) help guide for details on  
how to use the ib (PC software).  
For details on installing the ib (PC software), see  
“Setting up using the supplied CD” (p. 14).  
To start [Photo Surng]  
Press the A button to start [Photo Surng].  
When a related item of the image displayed is selected  
with FG, images related to the item are displayed in the  
lower part of the monitor. Use HI to display an image.  
To select related items that are not displayed, press the  
A button when selecting an item.  
Playing back pictures automatically  
[Slideshow]  
q(Playback menu) X Slideshow  
To stop [Photo Surng], use FG to select [ALL], and  
press the A button.  
Submenu 2  
Slide  
Submenu 3  
Application  
Selects the content  
to be included in the  
slideshow.  
ALL  
All/Event/  
Collection*1  
2011/  
02/26  
Off/Cosmic/  
Breeze/  
Mellow/  
Dreamy/  
Urban  
Related items  
Selects the background  
music options.  
BGM  
35ºN  
139ºE  
Selects the type of  
transition effect used  
between slides.  
Standard/  
Fade/Zoom  
Type  
Start  
Images corresponding the  
related items  
Starts the slideshow.  
*1  
The [Collection] that has been created with the ib (PC  
software) and imported back from a computer can play back.  
During a slideshow, press I to advance one frame,  
H to go back one frame.  
44 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For information on using the menus, see “Setup menu” (p. 6).  
Using the ib (PC software) and  
importing data back to the camera  
Cropping image [P]  
q(Playback menu) X Edit X P  
Refer to the ib (PC software) help guide for details on  
how to use the ib (PC software).  
1 Use HI to select an image, and press the A button.  
2 Use the zoom lever to select the size of the cropping  
frame, and use FGHI to move the frame.  
The ib (PC software) may not work properly on the  
pictures edited by other application software.  
The following [Photo Surng] functions can be  
performed when data created with the ib (PC  
software) is imported back to the camera.  
Cropping frame  
[Photo Surng]  
Information of persons or shooting locations and new  
Collections can be added in the related items.  
OK  
Set  
3 Press the A button after you have selected the area  
Changing the image size [Q]  
q(Playback menu) X Edit X Q  
to trim.  
The edited image is saved as a separate image.  
Submenu 3  
Application  
Adding sound to still images [R]  
This saves a high-resolution image  
as a separate image with a smaller  
size for use in e-mail attachments  
and other applications.  
C 640 × 480  
q(Playback menu) X Edit X R  
1 Use HI to select an image.  
E 320 × 240  
2 Aim the microphone toward the sound source.  
Microphone  
1 Use HI to select an image.  
2 Use FG to select an image size and press the A  
button.  
The resized image is saved as a separate image.  
3 Press the A button.  
Recording starts.  
The camera adds (records) sound for approx.  
4 seconds while playing back the image.  
EN 45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For information on using the menus, see “Setup menu” (p. 6).  
Retouching the skin and eyes  
[Beauty Fix]  
Brightening areas that are dark  
due to backlight or other reasons  
[Shadow Adj]  
q(Playback menu) X Edit X Beauty Fix  
q(Playback menu) X Edit X Shadow Adj  
Depending on the picture, the editing may not be  
effective.  
1 Use HI to select an image, and press the A button.  
The edited image is saved as a separate image.  
Submenu 3  
All  
Submenu 4  
Application  
Depending on the picture, the editing may not be  
effective.  
[Clear Skin], [Sparkle  
Eye] and [Dramatic Eye]  
are applied together.  
The retouching process may lower the image  
resolution.  
Makes skin look smooth  
and translucent. Select  
the correction effect  
from 3 levels.  
Clear Skin  
Soft/Avg/Hard  
Retouching red eyes in aash shoooting  
[Redeye Fix]  
Enhances the contrast  
of the eyes.  
Sparkle Eye  
q(Playback menu) X Edit X Redeye Fix  
Enlarges the subject’s  
eyes.  
1 Use HI to select an image, and press the A button.  
Dramatic Eye  
The edited image is saved as a separate image.  
1 Use FG to select a correction item, and press the A  
button.  
Depending on the picture, the editing may not be  
effective.  
2 Use HI to select an image for retouching, and press  
the A button.  
The retouching process may lower the image  
resolution.  
The retouched image is saved as a separate  
image.  
Erasing images [Erase]  
When [Clear Skin] is selected  
Use FG to select the retouching level, and press the  
q(Playback menu) X Erase  
A button.  
Submenu 2  
All Erase  
Application  
Clear Skin  
All images in the internal memory or  
card will be erased.  
Images are individually selected and  
erased.  
Soft  
Avg  
Sel. Image  
Erase  
Hard  
Deletes the image displayed.  
MENU  
OK  
Set  
Back  
46 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For information on using the menus, see “Setup menu” (p. 6).  
When erasing pictures in the internal memory, do not  
insert the card into the camera.  
Saving print settings to the image data  
[Print Order]  
Before erasing pictures from a memory card, insert  
the card into the camera.  
q(Playback menu) X Print Order  
Protected images cannot be erased.  
“Print reservations (DPOF)” (p. 58)  
Print reservation can be set only for still images that  
are recorded to the card.  
To individually select and erase images  
[Sel. Image]  
1 Use FG to select [Sel. Image], and press the  
A button.  
Protecting images [R]  
2 Use HI to select the image to be erased, and press  
the A button to add a R mark to the image.  
q(Playback menu) X R  
Protected images cannot be erased by [Erase] (p. 24,  
46), [Sel. Image] (p. 47), or [All Erase] (p. 47), but  
all images are erased by [Memory Format]/[Format]  
(p. 48).  
Turn the zoom lever to the W end to display an  
index view. Images can be quickly selected using  
the FGHI buttons. Turn to the T end to return  
to the single frame display.  
1 Use HI to select an image.  
2 Press the A button.  
5/30  
Sel. Image  
Press the A button again to cancel the settings.  
3 If necessary, repeat Steps 1and 2to protect other  
images, and press the m button.  
R mark  
Rotating images [y]  
OK  
MENU  
Erase/Cancel  
q(Playback menu) X y  
3 Repeat Step 2to select the images to be erased,  
and then press the m button to erase the selected  
1 Use HI to select an image.  
images.  
2 Press the A button to rotate the image.  
3 If necessary, repeat Steps 1and 2to make settings  
for other images, and press the m button.  
4 Use FG to select [Yes], and press the A button.  
The images with a R mark are erased.  
The new picture orientations will be saved even after  
the power is turned off.  
To erase all images [All Erase]  
1 Use FG to select [All Erase], and press the  
A button.  
2 Use FG to select [Yes], and press the A button.  
EN 47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For information on using the menus, see “Setup menu” (p. 6).  
Menus for Other Cameera Setttings  
The default settings of the function are highlighted in  
.
Erasing data completely  
[Memory Format]/[Format]  
Using an Eye-Fi card (commercially  
available) [Eye-Fi]  
r (Settings 1) X Memory Format/Format  
r (Settings 1) X Eye-Fi  
Before formatting, check that no important data is left  
in the internal memory or card.  
Submenu 2  
Application  
Off  
On  
Disable Eye-Fi communication.  
Enable Eye-Fi communication.  
Cards must be formatted with this camera before  
rst use or after being used with other cameras or  
computers.  
When using an Eye-Fi card, read the Eye-Fi card  
instruction manual carefully, and comply with the  
instructions.  
Submenu 2  
Yes  
No  
Application  
Completely erases the image data  
in the internal memory*1 or card  
(including protected images).  
Use the Eye-Fi card in compliance with the laws and  
regulations of the country where the camera is used.  
Cancels formatting.  
In locations such as on an airplane, where the Eye-Fi  
communication is prohibited, remove the Eye-Fi card  
from the camera, or set [Eye-Fi] to [Off].  
*1  
Be sure to remove the card before formatting the  
internal memory.  
This camera does not support the Eye-Fi card’s  
Endless mode.  
Copying images in the internal memory  
to the card [Backup]  
r (Settings 1) X Backup  
Submenu 2  
Yes  
No  
Application  
Backs up image data in the internal  
memory to the card.  
Cancels the backup.  
It takes some time to back up data. Check that  
the battery has sufcient power before starting the  
backup.  
48 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For information on using the menus, see “Setup menu” (p. 6).  
Selecting a method for connecting  
the camera to other devices  
[USB Connection]  
Turning on the camera with the q  
button [qPower On]  
r (Settings 1) X qPower On  
r (Settings 1) X USB Connection  
Submenu 2  
Application  
Submenu 2  
Auto  
Application  
The camera is not turned on. To turn  
on the camera, press the n  
button.  
No  
When the camera is connected to  
another device, the settings selection  
screen is displayed.  
Press and hold the qbutton to turn  
the camera on in the playback mode.  
Yes  
Select when connecting the camera  
to a computer via a storage device.  
Storage  
MTP  
Select when transferring images  
without using the supplied ib (PC  
software) on Windows Vista/  
Windows 7.  
Saving the mode when the camera is  
z
turned off [Keep Settings]  
z
r (Settings 1) X Keep Settings  
Select when connecting to a  
PictBridge-compatible printer.  
Print  
Submenu 2  
Application  
The shooting mode is set to P mode  
when the camera is turned on.  
System requirements  
No  
Windows  
:
Windows XP (Service Pack 1 or  
later)/Windows Vista/Windows 7  
The shooting mode is saved when  
the camera is turned off and is  
reactivated the next time the camera  
is turned on.  
Macintosh  
:
Mac OS X v10.3 or later  
Yes  
When using another system other than Windows XP  
(SP2 or later)/Windows Vista/Windows 7, set to  
[Storage].  
Even if a computer has USB ports, proper operation  
is not guaranteed in the following cases:  
Choosing the opening screen display  
[Pw On Setup]  
Computers with USB ports installed using an  
expansion card, etc.  
r (Settings 1) X Pw On Setup  
Computers without a factory-installed OS and  
home-built computers  
Submenu 2  
Application  
Off  
On  
No opening screen is displayed.  
The opening screen is displayed  
when the camera is turned on.  
EN 49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For information on using the menus, see “Setup menu” (p. 6).  
Selecting the camera sound and its volume [Sound Settings]  
s (Settings 2) X Sound Settings  
Submenu 2  
Sound Type  
Submenu 3  
1/2/3  
Application  
Selects the camera sounds (operation sounds, shutter sound, and  
warning sound).  
q Volume  
Selects the image playback volume.  
0/1/2/3/4/5  
0/1/2/3/4/5  
Volume  
Selects the operation volume of camera buttons.  
Resetting the le names of pictures [File Name]  
s (Settings 2) X File Name  
Submenu 2  
Application  
Folder name  
DCIM  
Folder name  
100OLYMP  
File name  
This resets the sequential number  
for the folder name and le name  
whenever a new card is inserted.*1  
This is useful when grouping images  
on separate cards.  
Pmdd0001.jpg  
Reset  
Even when a new card is inserted,  
this continues the numbering for  
the folder name and le name from  
the previous card. This is useful for  
managing all image folder names  
and les names with sequential  
numbers.  
999OLYMP  
Pmdd9999.jpg  
Auto  
Automatic  
numbering  
Automatic  
numbering  
*1  
The number for the folder name is reset to 100, and the  
one for the le name is reset to 0001.  
Month: 1 to C  
(A=October,  
B=November,  
C=December)  
Pmdd  
Day: 01 to 31  
50 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For information on using the menus, see “Setup menu” (p. 6).  
Adjusting the CCD and the image  
Adjusting the brightness of the monitor  
processing function [Pixel Mapping]  
[s]  
s (Settings 2) X Pixel Mapping  
s (Settings 2) X s  
This function has already been adjusted at factory  
shipping, and no adjustment is needed right  
after purchase. Approximately once a year is  
recommended.  
To adjust the monitor brightness  
1 Use FG to adjust the brightness while viewing the  
screen, and then press the A button.  
For best results, wait at least one minute after taking  
or viewing pictures before performing pixel mapping.  
If the camera is turned off during pixel mapping, be  
sure to perform it again.  
s
To adjust the CCD and the image  
processing function  
MENU  
OK  
Set  
Back  
Press the A button when [Start] (Submenu 2) is  
displayed.  
The camera checks and adjusts the CCD and the  
image processing function at the same time.  
Playing back images on a TV [TV Out]  
s (Settings 2) X TV Out  
The TV video signal system varies depending on the countries and regions. Before viewing camera images on your  
TV, select the video output according to your TV’s video signal type.  
Submenu 2  
Submenu 3  
NTSC  
Application  
Connecting the camera to a TV in North America, Taiwan, Korea, Japan,  
and so on.  
Video Out  
PAL  
Connecting the camera to a TV in European countries, China, and so on.  
480p/576p  
720p  
HDMI Out  
Set the playback format.  
1080i  
Off  
On  
Operate with the camera.  
HDMI Control  
Operate with the TV remote control.  
The factory default settings differ according to the region where the camera is sold.  
EN 51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For information on using the menus, see “Setup menu” (p. 6).  
To play back camera images on a TV  
Connection via AV cable  
1 Use the camera to select the same video signal system as the one of connected TV ([NTSC]/[PAL]).  
2 Connect the TV and camera.  
Open the connector cover  
in the direction of the arrow.  
Connect to the TV video  
input jack (yellow) and  
Multi-connector  
audio input jack (white).  
AV cable (supplied)  
Connection via HDMI cable  
1 On the camera, select the digital signal format that will be connected ([480p/576p]/[720p]/[1080i]).  
2 Connect the TV and camera.  
When set to [1080i], 1080i format takes priority for HDMI output. However, if this setting does not match the input  
setting of the TV, the signal format is changed rst to 720p and then to 480p/576p. For details on changing the input  
setting of the TV, refer to the TV’s instruction manual.  
When the camera is connected to the computer by the USB cable, do not connect the HDMI cable to the camera.  
Use an HDMI cable that matches the HDMI micro connector on the camera and the HDMI connector on the TV.  
When the camera and TV are connected by both an AV cable and an HDMI cable, the HDMI cable will take priority.  
Open the connector cover  
in the direction of the arrow.  
HDMI micro  
connector  
Connect to the HDMI  
connector on the TV.  
HDMI cable (type D/sold separately: CB-HD1)  
52 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For information on using the menus, see “Setup menu” (p. 6).  
Type C  
Type D (CB-HD1)  
3 Turn on the TV, and change “INPUT” to “VIDEO (an input jack connected to the camera).”  
For details on changing the input source of the TV, refer to the TV’s instruction manual.  
4 Turn on the camera, and use HI to select the image for playback.  
Depending on the TV’s settings, the displayed images and information may become cropped.  
To operate images with the TV remote control  
1 Set [HDMI Control] to [On], and turn off the camera.  
2 Connect the camera and TV with an HDMI cable. “Connection via HDMI cable” (p. 52)  
3 First turn on the TV, and then turn on the camera.  
Operate by following the operation guide that is displayed on the TV.  
With some TVs, operations cannot be performed with the TV remote control even though the operation guide is  
displayed on the screen.  
If operations cannot be performed with the TV remote control, set [HDMI Control] to [Off] and operate using the  
camera.  
Saving battery power between shots  
[Power Save]  
Changing the display language [l]  
s (Settings 2) X l  
s (Settings 2) X Power Save  
Submenu 2  
Languages  
Application  
Submenu 2  
Application  
The language for the menus and  
error messages displayed on the  
monitor is selected.  
Off  
On  
Cancels [Power Save].  
When the camera is not being used  
for approx. 10 seconds, the monitor  
automatically turns off to save  
battery power.  
To resume standby mode  
Press any button.  
EN 53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For information on using the menus, see “Setup menu” (p. 6).  
Setting the date and time [X]  
t (Settings 3) X X  
“Date, time, time zone, and language” (p. 16).  
To select the date display order  
1 Press I after setting Minute, and use FG to select the date  
X
display order.  
Y
M
D
Time  
2 Press the A button to set.  
Y/M/D  
2011.02.26 00:00  
To check the date and time  
Press the INFO button while the camera is turned off. The current time  
Date order  
is displayed for approx. 3 seconds.  
MENU  
OK  
Set  
Cancel  
Choosing home and alternate time zones [World Time]  
t (Settings 3) X World Time  
You will not be able to select a time zone using [World Time] if the camera clock has not rst been set using [X].  
Submenu 2  
Submenu 3  
Application  
x
The time in the home time zone (the time zone selected for x in submenu 2).  
Home/Alternate  
The time in the travel destination time zone (the time zone selected for z in  
submenu 2).  
z
x*1  
z*1, 2  
Select the home time zone (x).  
Select the travel destination time zone (z).  
*1  
In areas where daylight saving time is in effect, use FG to turn daylight saving time ([Summer]) on.  
When you select a time zone, the camera automatically calculates the time difference between the selected zone and  
the home time zone (x) to display the time in the travel destination time zone (z).  
*2  
Restoring data in the camera [Data Repair]  
t (Settings 3) X Data Repair  
Playback will become available by performing [Data Repair] when the Photo surng function is not activated  
properly. However, data such as collections and other groups created with the ib (PC software) is deleted from the  
database in the camera.  
Import the data back into the camera from a computer to playback the data created with the ib (PC software).  
54 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Printing  
Direct printing (PictBridge*1)  
Turn on the printer, and then connect the  
printer and camera.  
2
By connecting the camera to a PictBridge-compatible  
printer, you can print images directly without using a  
computer.  
Open the connector cover  
in the direction of the arrow.  
To nd out if your printer supports PictBridge, refer to the  
printer’s instruction manual.  
Multi-connector  
*1  
PictBridge is a standard for connecting digital cameras  
and printers of different makers and printing out pictures  
directly.  
The printing modes, paper sizes, and other  
parameters that can be set with the camera vary  
depending on the printer that is used. For details,  
refer to the printer’s instruction manual.  
USB cable  
(supplied)  
For details on the available paper types, loading  
paper, and installing ink cassettes, refer to the  
printer’s instruction manual.  
I button  
Printing images at the printer’s  
standard settings [Easy Print]  
In the setup menu, set [USB Connection] to [Print].  
[USB Connection] (p. 49)  
Display the image to be printed on the  
monitor.  
1
Easy Print Start  
Custom Print OK  
“Viewing images” (p. 22)  
Press I to start printing.  
3
4
To print another image, use HI to select an  
image, and press the A button.  
EN 55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To exit printing  
After a selected image is displayed on the screen,  
disconnect the USB cable from the camera and printer.  
Submenu 2  
Print  
Application  
This prints the image selected in  
Step 6.  
This prints all images stored in the  
internal memory or card.  
All Print  
This prints one image in a multiple  
layout format.  
Multi Print  
All Index  
This prints an index of all images  
stored in the internal memory or card.  
OK  
Exit  
Print  
This prints images based on the print  
reservation data on the card.  
Print Order*1  
*1  
Changing the printer’s settings for  
printing [Custom Print]  
[Print Order] is available only when print reservations  
have been made. “Print Reservations (DPOF)” (p. 58)  
Use FG to select [Size] (Submenu 3), and  
press I.  
4
Follow Steps 1 and 2 for [Easy Print] (p. 55).  
1
2
3
If the [Printpaper] screen is not displayed, the [Size],  
[Borderless], and [Pics/Sheet] are set to the printer’s  
standard.  
Press the A button.  
Use FG to select the print mode, and press  
the A button.  
Printpaper  
Print Mode Select  
Size  
Borderless  
Standard  
Print  
Standard  
All Print  
Multi Print  
All Index  
Print Order  
MENU  
OK  
Back  
Set  
MENU  
OK  
Set  
Exit  
Use FG to select the [Borderless] or [Pics/  
Sheet] settings, and press the A button.  
5
56 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Submenu 4  
Off/On*1  
Application  
Submenu 5 Submenu 6  
Application  
The image is printed with a border  
around it ([Off]).  
The image is printed to ll the entire  
paper ([On]).  
This selects the number  
of prints.  
<×  
0 to 10  
Selecting [With] prints the  
images with the date.  
Selecting [Without] prints the  
images without the date.  
Date  
With/Without  
(The number of  
images per sheet  
varies depending  
on the printer.)  
The number of images per sheet  
([Pics/Sheet]) is selectable only when  
[Multi Print] is selected in Step 3.  
Selecting [With] prints the le  
name on the image.  
File Name  
With/Without Selecting [Without] does not  
print any le name on the  
image.  
*1  
The available settings for [Borderless] vary depending  
on the printer.  
If [Standard] is selected in Steps 4 and 5, the image  
is printed at the printer’s standard settings.  
(Proceeds to  
This selects a portion of the  
the setting  
P
image for printing.  
screen.)  
4/30  
To crop an image [P]  
14M  
NORM  
1 Use the zoom lever to select the size of the cropping  
frame, use FGHI to move the frame, and then  
press the A button.  
FILE  
100 0004  
’11/02/26 00:00  
OK  
Print  
More  
Single Print  
Cropping frame  
Use HI to select an image.  
6
7
Press F to make a print reservation for the  
current image.  
Press G to make the detailed printer settings  
OK  
Set  
for the current image.  
2 Use FG to select [OK], and press the A button.  
To make the detailed printer settings  
1 Use FGHI to select the setting, and press the  
P
A button.  
Print Info  
OK  
<x  
Date  
1
Cancel  
Without  
Without  
File Name  
P
MENU  
OK  
Set  
Back  
MENU  
OK  
Set  
Exit  
EN 57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To cancel printing  
If necessary, repeat Steps 6 and 7 to select  
the image to be printed, make the detailed  
settings, and set [Single Print].  
8
9
1 Press the m button while [Do Not Remove USB  
Cable] is displayed.  
2 Select [Cancel] using FG and then press the A  
button.  
Press the A button.  
Print  
Print  
Cancel  
Do Not Remove USB Cable  
MENU  
Cancel  
MENU  
OK  
Set  
Back  
Continue  
Cancel  
Use FG to select [Print], and press the  
A button.  
10  
OK  
Set  
Printing starts.  
When [Option Set] is selected in [All Print] mode,  
[Print Info] screen is displayed.  
Press the m button.  
11  
12  
When printing is nished, the [Print Mode Select]  
screen is displayed.  
When the message [Remove USB Cable] is  
displayed, disconnect the USB cable from the  
camera and printer.  
Print Mode Select  
Print  
All Print  
Multi Print  
All Index  
Print Order  
Print Reservations (DPOF*1)  
In print reservations, the number of prints and date imprint  
option are saved in the image on the card. This enables  
easy printing at a printer or print shop supporting DPOF  
by using only the print reservations on the card without a  
computer or a camera.  
MENU  
OK  
Set  
Exit  
*1  
DPOF is a standard for storing automatic printout  
information from digital cameras.  
58 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Print reservations can be set only for the images  
stored on the card.  
Use HI to select the image for print  
reservation. Use FG to select the quantity.  
Press the A button.  
4
DPOF reservations set by another DPOF device  
cannot be changed by this camera. Make changes  
using the original device. Making new DPOF  
reservations with this camera will erase the  
reservations made by the other device.  
X
DPOF print reservations can be made for up to 999  
images per card.  
No  
Date  
Time  
Single-frame print reservations [  
<]  
MENU  
OK  
Set  
Back  
Display the setup menu.  
Use FG to select the [X] (date print)  
screen option, and press the A button.  
1
5
“Setup menu” (p. 6)  
Submenu 2  
Application  
From the playback menu q, select [Print  
Order] and then press the A button.  
2
No  
This prints the image only.  
This prints the image with the  
shooting date.  
Print Order  
Date  
Time  
This prints the image with the  
shooting time.  
<
U
Print Order  
MENU  
OK  
Set  
Exit  
(
)
1
1
Use FG to select [<], and press the  
A button.  
3
Set  
Cancel  
4/30  
MENU  
OK  
Set  
Back  
0
Use FG to select [Set], and press the  
A button.  
6
14M  
NORM  
FILE  
100 0004  
’11/02/26 00:00  
OK  
Set  
EN 59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Reserving one print each of all images  
on the card [  
Resetting the print reservation data  
for selected images  
U
]
Follow Steps 1 and 2 in [<] (p. 59).  
Follow Steps 1 and 2 in [<] (p. 59).  
1
2
1
2
Use FG to select [U], and press the A  
button.  
Use FG to select [<], and press the  
A button.  
Follow Steps 5 and 6 in [<].  
Use FG to select [Keep] and press the  
A button.  
3
3
Resetting all print reservation data  
Use HI to select the image with the print  
reservation you want to cancel. Use FG to  
set the print quantity to “0”.  
4
Follow Steps 1 and 2 in [<] (p. 59).  
1
2
Select either [<] or [U], and press the  
If necessary, repeat Step 4, and then press  
the A button when nished.  
5
A button.  
Print Order Setting  
Print Ordered  
Use FG to select the [X] (date print)  
screen option, and press the A button.  
The settings are applied to the remaining images  
6
with the print reservation data.  
Reset  
Keep  
Use FG to select [Set], and press the  
A button.  
7
MENU  
OK  
Set  
Back  
Use FG to select [Reset], and press the  
A button.  
3
60 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Usage Tips  
If the camera does not work as intended, or if an error  
message is displayed on the screen, and you are unsure  
of what to do, refer to the information below to x the  
problem(s).  
With prolonged camera use, the internal  
temperature may increase, resulting in automatic  
shutdown. If this occurs, remove the battery from  
the camera and wait until the camera has sufciently  
cooled. The camera’s external temperature may  
also increase during use, however this is normal and  
does not indicate malfunction.  
Troubleshooting  
Monitor  
Battery  
“Difcult to see”.  
“The camera does not work even when batteries are  
installed”.  
Condensation*1 may have occurred. Turn off the  
power, and wait for the camera body to become  
acclimated to the surrounding temperature and dry  
out before taking pictures.  
Insert new or recharged batteries in the correct  
direction.  
“Inserting the battery” (p. 13)  
*1  
Dew drops can form in the camera when it is  
Battery performance may have been reduced  
temporarily due to low temperature. Take the  
batteries out of the camera, and warm them by  
putting them in your pocket for a while.  
suddenly taken from a cold location into a warm,  
humid room.  
“Vertical lines appear on the screen”.  
This condition may occur when the camera is  
pointed at an extremely bright subject under a clear  
sky and so on. The lines do not appear, however,  
in the nal image.  
“The light is caught in the picture”.  
Shooting with ash results in an image with many  
ash reections on dust in the air.  
Card/Internal memory  
“An error message is displayed”.  
“Error message” (p. 62)  
Shutter button  
“No picture is taken when the shutter button is pressed”.  
Cancel sleep mode.  
Date and time function  
To save battery power, the camera automatically  
goes into sleep mode and the monitor turns off  
if there is no operation for 3 minutes when the  
camera is turned on. No picture is taken even if  
the shutter button is fully pressed in this mode.  
Operate the zoom lever or other buttons to restore  
the camera from sleep mode before taking a  
picture. If the camera is left for another 12 minutes,  
it automatically turns off. Press the n button  
to turn the camera on.  
“Date and time settings return to the default setting”.  
If the batteries are removed and left out of the  
camera for about 3 days*2, the date and time settings  
return to the default setting, and must be reset.  
*2  
The time until the date and time settings return to  
the default setting varies depending on how long  
the batteries have been loaded.  
“Date, time, time zone, and language” (p. 16)  
Miscellaneous  
Press the qbutton to switch to the shooting  
mode.  
“The camera makes a noise when taking pictures”.  
The camera may activate the lens and make a  
noise even if no operation is performed. This  
is because the camera automatically performs  
actions of auto focus as far as it is ready to shoot.  
Wait until #(ash charge) stops blinking before  
taking pictures.  
EN 61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Error message  
Error message  
Corrective action  
When one of the messages below is displayed on the  
monitor, check the corrective action.  
Problem with selected image  
Use photo retouch software, etc. to  
edit the image on a computer.  
The Image Cannot  
Be Edited  
Error message  
Corrective action  
Card problem  
Battery problem  
• Insert new batteries.  
• If using rechargeable batteries,  
charge the batteries.  
Insert a new card.  
Battery Empty  
Card Error  
Card problem  
Connection problem  
Connect the camera and computer  
or printer correctly.  
The card write-protect switch is  
set to the “LOCK” side. Release  
the switch.  
No Connection  
No Paper  
No Ink  
Write Protect  
Memory Full  
Internal memory problem  
• Insert a card.  
Printer problem  
Load paper into the printer.  
• Erase unwanted images.*1  
Card problem  
Printer problem  
Rell the ink in the printer.  
• Replace the card.  
• Erase unwanted images.*1  
Card Full  
Card Setup  
Card problem  
Printer problem  
Use FG to select [Format], and  
press the A button. Next, use  
FG to select [Yes], and press the  
A button.*2  
Remove the jammed paper.  
Power Off  
Format  
Jammed  
Printer problem  
Return to the status where the  
printer can be used.  
Settings  
OK  
Set  
Changed*3  
Memory Setup  
Internal memory problem  
Printer problem  
Use FG to select [Memory  
Format], and press the A button.  
Next, use FG to select [Yes], and  
press the A button.*2  
Turn off the camera and printer,  
check the printer for any problems,  
and then turn the power on again.  
Power Off  
Memory Format  
Print Error  
OK  
Set  
Problem with selected image  
Internal memory/Card problem  
Take pictures before viewing them.  
Use a computer to print.  
Cannot Print*4  
No Picture  
*1  
Before erasing important images, download them to a  
computer.  
All data will be erased.  
This is displayed, for instance, when the printer’s paper  
tray has been removed. Do not operate the printer while  
making the print settings on the camera.  
This camera may be unable to print images taken by  
other cameras.  
Problem with selected image  
Use photo retouch software, etc.  
to view the image on a computer.  
If the image still cannot be viewed,  
the image le is corrupted.  
*2  
*3  
Picture Error  
*4  
62 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Shooting tips  
When you are unsure of how to take a picture that you  
envision, refer to the information below.  
Object with no vertical lines*1  
Focusing  
*1  
It is also effective to compose the shot by holding the  
camera vertically to focus, and then returning to the  
horizontal position to take the picture.  
“Focusing on the subject”  
Taking a picture of a subject not in the center  
of the screen  
After focusing on an object at the same distance  
as the subject, compose the shot, and take the  
picture.  
When objects are at different  
distances  
Pressing the shutter button halfway (p. 20)  
Set [AF Mode] (p. 40) to [Face/iESP]  
Taking a picture in [AF Tracking] mode (p. 40)  
The camera tracks the subject movement  
automatically to focus on it continuously.  
Fast-moving object  
Taking a picture of a shadowy subject  
Using the AF illuminator makes focusing easier.  
[AF Illuminat.] (p. 41)  
Taking a picture of subjects where autofocus  
is difcult  
The subject is not in the center of  
the frame  
In the following cases, after focusing on an object  
(by pressing the shutter button halfway down) with  
high contrast at the same distance as the subject,  
compose the shot, and take the picture.  
Subjects with low contrast  
When extremely bright objects  
appear in the center of the screen  
EN 63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Taking pictures of a white beach or snow scene  
Camera shake  
Set the mode to [q Beach & Snow] (p. 29)  
Taking pictures using exposure compensation  
(p. 36)  
“Taking pictures without camera shake”  
Taking pictures using [Image Stabilizer] (p. 41)  
Adjust the brightness while viewing the screen for  
taking the picture. Normally, taking pictures of white  
subjects (such as snow) results in images that are  
darker than the actual subject. Use the exposure  
compensation to adjust in the positive (+) direction  
to express whites as they appear. When taking  
pictures of black subjects, on the other hand, it is  
effective to adjust in the negative (-) direction.  
When a picture is taken of a shadowy subject, the  
CCD*1 shifts to correct for camera shake even if  
the ISO speed is not increased. This function is  
also effective when taking pictures at a high zoom  
magnication.  
*1  
A device that takes light received through the  
lens and converts it into electric signals.  
Shooting movies using [IS Movie Mode] (p. 41)  
Select [C Sport] in the scene mode (p. 29)  
Color hue  
The [C Sport] mode uses a fast shutter speed and  
can reduce the blur incurred by a moving subject.  
“Taking pictures with colors at the same shade as  
they appear”  
Taking pictures at a high ISO sensitivity  
Taking pictures by selecting white balance  
(p. 36)  
If a high ISO sensitivity is selected, pictures can  
be taken at a high shutter speed even at locations  
where a ash cannot be used.  
Best results in most environments can normally  
be obtained with the [WB Auto] setting, but for  
some subjects, you should try experimenting  
with different settings. (This is especially true for  
sunshade under a clear sky, mixed natural and  
articial light settings, and so on.)  
“Selecting the ISO sensitivity” (p. 37)  
Exposure (brightness)  
“Taking pictures with the right brightness”  
Taking pictures of a subject against a backlight  
Faces or backgrounds are bright even when shot  
against backlight.  
Image quality  
“Taking sharper pictures”  
[Shadow Adjust] (p. 40)  
Taking pictures with the optical zoom  
Avoid using digital zoom (p. 41) to take pictures.  
Taking pictures at a low ISO sensitivity  
If the picture is taken with a high ISO sensitivity,  
noise (small colored spots and color unevenness  
that were not in the original image) can occur, and  
the image can appear grainy.  
Taking pictures using [Face/iESP] (p. 40)  
Appropriate exposure is obtained for a face against  
backlight, and the face is brightened.  
Taking pictures using [n] for [ESP/n]  
(p. 40)  
Brightness is matched with a subject in the center  
of the screen and the image is not affected by  
background light.  
“Selecting the ISO sensitivity” (p. 37)  
Taking pictures using [Fill In] (p. 34) ash  
A subject against backlight is brightened.  
64 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playback/Editing tips  
Panorama  
“Taking pictures so that the frames are stitched  
smoothly”  
Playback  
A tip for panoramic shooting  
“Playing images in the internal memory and card”  
Taking pictures by pivoting with the camera at the  
center prevents shifting of the image. When taking  
pictures of close objects in particular, pivoting with  
the lens end at the center produces favorable  
results.  
Remove the card and display the images in  
internal memory  
“Inserting the battery” (p. 13), “Inserting an  
SD/SDHC/SDXC memory card or Eye-Fi card  
(commercially available)” (p. 18)  
[Panorama] (p. 30)  
“Viewing images with high picture quality on a high-  
denition TV”  
Batteries  
Connect the camera to the TV using an HDMI  
cable (sold separately)  
“Making batteries last longer”  
“Playing back images on a TV” (p. 51)  
Avoid any of the following operations when not  
actually taking pictures because they deplete  
the battery power  
Editing  
Repeatedly pressing the shutter button  
halfway.  
“Erasing the sound recorded to a still image”  
Repeatedly using the zoom.  
Record over the sound with silence when  
playing back the image  
Set [Power Save] (p. 53) to [On]  
“Adding sound to still images [R]” (p. 45)  
EN 65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
Camera care  
Battery  
In addition to the batteries provided with the camera,  
the following types of battery can be used. Choose the  
power source best suited to the situation.  
Exterior  
Wipe gently with a soft cloth. If the camera is very dirty,  
soak the cloth in mild soapy water and wring well. Wipe  
the camera with the damp cloth and then dry it with a  
dry cloth. If you have used the camera at the beach,  
use a cloth soaked in clean water and wrung well.  
AA alkaline batteries  
The number of pictures that you can take may vary  
considerably depending on the battery manufacturer  
and shooting conditions.  
Monitor  
AA NiMH batteries (rechargeable batteries)  
Wipe gently with a soft cloth.  
Being rechargeable, Olympus NiMH batteries are  
reusable and economical. For details, refer to the  
instruction manual for your charger.  
Lens  
Blow dust off the lens with a commercial blower, then  
wipe gently with a lens cleaner.  
Caution:  
Do not use strong solvents such as benzene or  
alcohol, or chemically treated cloth.  
There is a risk of explosion if the battery is replaced  
with the incorrect battery type.  
Dispose of the used battery following the instructions.  
(p. 74)  
Mold may form on the lens surface if the lens is left  
dirty.  
The following types of batteries cannot be used:  
Lithium battery pack (CR-V3)/AA (R6) manganese  
(zinc-carbon) batteries/AA (R6) oxyride batteries/AA  
(R6) lithium batteries  
Power consumption by the camera varies depending on  
which functions are used.  
During the conditions described below, power is  
consumed continuously and the battery becomes  
exhausted quickly.  
Storage  
When storing the camera for extended periods, remove  
the battery, USB-AC adapter (sold separately) and card,  
and keep in a cool, dry place that is well ventilated.  
Periodically insert the battery and test the camera  
functions.  
Avoid leaving the camera in places where chemical  
products are handled since this may result in  
corrosion.  
The zoom is used repeatedly.  
The shutter button is pressed halfway repeatedly in  
shooting mode, activating the auto focus.  
A picture is displayed on the monitor for an extended  
period of time.  
The camera is connected to a printer.  
Using an exhausted battery may cause the camera to  
turn off without displaying the battery level warning.  
Battery life varies depending on the type of battery,  
manufacturer, shooting conditions, etc. Similarly, the  
camera may turn off without displaying the battery level  
warning or may display the battery level warning more  
quickly.  
66 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SD/SDHC/SDXC memory card write-  
protect switch  
USB-AC adapter (sold separately)  
This camera can be used with a separately sold USB-AC  
adapter (F-3AC). If using the USB-AC adapter (F-3AC),  
it must be connected using the USB cable included with  
the camera. Do not use any other AC adapter with this  
camera.  
The SD/SDHC/SDXC memory card body has a write-  
protect switch. If you set the switch to the “LOCK”  
side, you will not be able to write to the card, delete  
data or format. Return the switch to enable writing.  
The AC cable supplied with the the USB-AC adapter  
(F-3AC) is designed to be used only with the USB-AC  
adapter (F-3AC). Do not use the AC cable with any other  
products.  
LOCK  
Using the USB-AC adapter abroad  
The USB-AC adapter can be used in most home  
electrical sources within the range of 100 V to 240 V AC  
(50/60Hz) around the world. However, depending on the  
country or area you are in, the AC wall outlet may be  
shaped differently and the USB-AC adapter may require  
a plug adapter to match the wall outlet. For details, ask  
at your local electrical shop or travel agent.  
Cards compatible with this camera  
SD/SDHC/SDXC memory cards and Eye-Fi cards (for  
compatibility card details, visit the Olympus website.)  
Do not use travel voltage converters as they could  
damage the USB-AC adapter.  
Using a new card  
Eye-Fi card (commercially available)  
Cards must be formatted with this camera before  
rst use or after being used with other cameras or  
computers.  
The Eye-Fi card may become hot during use.  
When using an Eye-Fi card, the battery may run out  
faster.  
[Memory Format]/[Format] (p. 48)  
When using the Eye-Fi card, read the instruction  
manual of the Eye-Fi card carefully, and comply  
with the instructions.  
When using an Eye-Fi card, the camera may function  
more slowly.  
Using an SD/SDHC/SDXC memory  
card or Eye-Fi card (commercially  
available)  
A card (and internal memory) also corresponds to the  
lm that records images in a lm camera. Otherwise, the  
recorded images (data) can be erased, and retouching is  
also available with the use of a computer. Cards can be  
removed from the camera and exchanged, but this is not  
possible with the internal memory. Use of larger capacity  
cards enables you to take more pictures.  
EN 67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Checking the image saving location  
Readout/recording process of the card  
The memory indicator shows whether the internal  
memory or card is being used during shooting and  
playback.  
During shooting, the current memory indicator lights  
up red while the camera is writing data. Never open  
the battery/card compartment cover or unplug the  
USB cable. This can not only damage the image data  
but also render the internal memory or card unusable.  
Current memory indicator  
v: Internal memory is being used  
w: Card is being used  
P
Current memory  
indicator  
P
0.0  
WB  
AUTO  
ISO  
AUTO  
0.0  
00:34  
WB  
AUTO  
14M  
4
ISO  
AUTO  
00:34  
Lights up red  
14M  
4
4/30  
Shooting mode  
’11/02/26 00:00  
Playback mode  
Even if [Memory Format]/[Format], [Erase],  
[Sel. Image], or [All Erase] is performed, the data in  
the card is not completely erased. When disposing of  
the card, damage the card to prevent the disclosure  
of personal data.  
68 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Number of storable pictures (still images)/Continuous recording length (movies) in the  
internal memory and SD/SDHC/SDXC memory cards  
The gures in the following tables are quoted only as a rough guideline. The actual number of storable pictures or  
continuous recording lengths will differ according to the shooting conditions and memory cards used.  
The gures in the table below are the number of the storable pictures when using the internal memory formatted.  
[Memory Format]/[Format] (p. 48)  
Still pictures  
Number of storable still pictures  
Image Size  
Compression  
SD/SDHC/SDXC memory card  
(1GB)  
Internal memory  
L
M
L
M
L
M
L
M
L
M
L
M
L
M
L
M
L
M
8
141  
277  
6 4288×3216  
4 3264×2448  
n 2560×1920  
3 2048×1536  
2 1600×1200  
1 1280×960  
7 640×480  
17  
15  
241  
29  
469  
24  
385  
46  
738  
38  
618  
75  
1,211  
992  
62  
118  
94  
1,892  
1,514  
2,884  
5,047  
8,652  
187  
180  
316  
542  
11  
K 4288×2416  
0 1920×1080  
23  
367  
57  
917  
111  
1,781  
EN 69  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Movies  
Continuous recording length  
SD/SDHC/SDXC memory card  
(1GB)  
Without sound  
Image Size  
Image Quality  
Internal memory  
With sound  
Without sound  
37 sec.  
With sound  
L
M
L
M
L
37 sec.  
10 min. 32 sec. 10 min. 42 sec.  
20 min. 44 sec. 21 min. 24 sec.  
20 min. 44 sec. 21 min. 24 sec.  
40 min. 10 sec. 42 min. 45 sec.  
L 1280×720  
1 min. 12 sec.  
1 min. 12 sec.  
2 min. 21 sec.  
1 min. 15 sec.  
1 min. 15 sec.  
2 min. 30 sec.  
8 640×480  
9 320×240  
2 min. 21 sec.  
2 min. 30 sec.  
40 min. 10 sec. 42 min. 45 sec.  
The maximum le size of a single movie is 4 GB, regardless of the capacity of the card.  
The maximum recording length of a single movie is 29 minutes for [L].  
Increasing the number of pictures that can be taken  
Either erase unwanted images, or connect the camera to a computer or other device to save the images, and then erase  
the images in the internal memory or card. [Erase] (p. 24, 46), [Sel. Image] (p. 47), [All Erase] (p. 47),  
[Memory Format]/[Format] (p. 48)  
70 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Attachments — For your safety, and to avoid damaging the  
product, use only accessories recommended by Olympus.  
Water and Moisture — For precautions on products with  
weatherproof designs, read the weatherproong sections.  
Location To avoid damage to the product, mount the product  
securely on a stable tripod, stand, or bracket.  
Power Source — Connect this product only to the power  
source described on the product label.  
Lightning — If a lightning storm occurs while using an USB-AC  
adapter, remove it from the wall outlet immediately.  
Foreign Objects To avoid personal injury, never insert a  
metal object into the product.  
SAFETY PRECAUTIONS  
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
CAUTION: TO REDUCE THE RISK OF ELECTRICAL  
SHOCK, DO NOT REMOVE COVER (OR BACK).  
NO USER-SERVICEABLE PARTS INSIDE.  
REFER SERVICING TO QUALIFIED OLYMPUS  
SERVICE PERSONNEL.  
Heat — Never use or store this product near any heat source  
such as a radiator, heat register, stove, or any type of  
equipment or appliance that generates heat, including stereo  
ampliers.  
An exclamation mark enclosed in a  
triangle alerts you to important operating  
and maintenance instructions in the  
documentation provided with the product.  
Handling the Camera  
WARNING  
DANGER  
If the product is used without observing  
the information given under this symbol,  
serious injury or death may result.  
Do not use the camera near ammable or explosive gases.  
Do not use the ash and LED (including AF illuminator) on  
people (infants, small children, etc.) at close range.  
You must be at least 1 m (3 ft.) away from the faces of your  
subjects. Firing the ash too close to the subject’s eyes could  
cause a momentary loss of vision.  
Keep young children and infants away from the camera.  
Always use and store the camera out of the reach of young  
children and infants to prevent the following dangerous  
situations which could cause serious injury:  
Becoming entangled in the camera strap, causing  
strangulation.  
WARNING If the product is used without observing  
the information given under this symbol,  
injury or death may result.  
CAUTION  
If the product is used without observing  
the information given under this symbol,  
minor personal injury, damage to the  
equipment, or loss of valuable data may  
result.  
WARNING!  
TO AVOID THE RISK OF FIRE OR ELECTRICAL SHOCK,  
NEVER DISASSEMBLE, EXPOSE THIS PRODUCT  
TO WATER OR OPERATE IN A HIGH HUMIDITY  
ENVIRONMENT.  
Accidentally swallowing the battery, cards or other small  
parts.  
Accidentally ring the ash into their own eyes or those of  
another child.  
General Precautions  
Accidentally being injured by the moving parts of the  
camera.  
Read All Instructions — Before you use the product, read all  
operating instructions. Save all manuals and documentation  
for future reference.  
Cleaning — Always unplug this product from the wall outlet  
before cleaning. Use only a damp cloth for cleaning. Never  
use any type of liquid or aerosol cleaner, or any type of  
organic solvent to clean this product.  
Do not look at the sun or strong lights with the camera.  
Do not use or store the camera in dusty or humid places.  
Do not cover the ash with a hand while ring.  
Use SD/SDHC/SDXC memory cards or Eye-Fi cards only. Never  
use other types of cards.  
If you accidently insert another type of card into the camera,  
contact an authorized distributor or service center. Do not try to  
remove the card by force.  
EN 71  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To prevent causing battery leaks or damaging their terminals,  
carefully follow all instructions regarding the use of batteries.  
Never attempt to disassemble a battery or modify it in any  
way, solder, etc.  
If battery uid gets into your eyes, ush your eyes immediately  
with clear, cold running water and seek medical attention  
immediately.  
Always store batteries out of the reach of small children. If a  
child accidentally swallows a battery, seek medical attention  
immediately.  
CAUTION  
Stop using the camera immediately if you notice any unusual  
odors, noise, or smoke around it.  
Never remove the batteries with bare hands, which may  
cause a re or burn your hands.  
Never hold or operate the camera with wet hands.  
Do not leave the camera in places where it may be subject to  
extremely high temperatures.  
Doing so may cause parts to deteriorate and, in some  
circumstances, cause the camera to catch re. Do not use  
the charger or USB-AC adapter (sold separately) if it is  
covered (such as a blanket). This could cause overheating,  
resulting in re.  
WARNING  
Keep batteries dry at all times.  
To prevent batteries from leaking, overheating, or causing a  
re or explosion, use only batteries recommended for use with  
this product.  
Handle the camera with care to avoid getting a low-temperature  
burn.  
When the camera contains metal parts, overheating can  
result in a low-temperature burn. Pay attention to the  
following:  
Never mix batteries (old and new batteries, charged and  
uncharged batteries, batteries of different manufacture or  
capacity, etc.).  
When used for a long period, the camera will get hot. If you  
hold on to the camera in this state, a low-temperature burn  
may be caused.  
Never attempt to charge alkaline, lithium battery packs.  
Insert the battery carefully as described in the operating  
instructions.  
In places subject to extremely cold temperatures, the  
temperature of the camera’s body may be lower than the  
environmental temperature. If possible, wear gloves when  
handling the camera in cold temperatures.  
Be careful with the strap.  
Do not use batteries if their body is not covered by the  
insulating sheet or if the sheet is torn, as this may cause uid  
leaks, re or injury.  
CAUTION  
Be careful with the strap when you carry the camera. It could  
easily catch on stray objects and cause serious damage.  
Do not remove batteries immediately after using the camera.  
Batteries may become hot during prolonged use.  
Always unload the battery from the camera before storing the  
camera for a long period.  
Battery Handling Precautions  
Follow these important guidelines to prevent batteries from leaking,  
overheating, burning, exploding, or causing electrical shocks or  
burns.  
DANGER  
When using NiMH batteries (rechargeable batteries), use only  
Olympus brand NiMH batteries and the correct charger.  
Never heat or incinerate batteries.  
Take precautions when carrying or storing batteries to prevent  
them from coming into contact with any metal objects such as  
jewelry, pins, fasteners, etc.  
Never store batteries where they will be exposed to direct  
sunlight, or subjected to high temperatures in a hot vehicle,  
near a heat source, etc.  
72 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Caution for Usage Environment  
The following AA (R6) batteries cannot be  
used.  
To protect the high-precision technology contained in this  
product, never leave the camera in the places listed below, no  
matter if in use or storage:  
Places where temperatures and/or humidity are high or go  
through extreme changes. Direct sunlight, beaches, locked  
cars, or near other heat sources (stove, radiator, etc.) or  
humidiers.  
In sandy or dusty environments.  
Near ammable items or explosives.  
Batteries whose bodies are only partially or not at  
all covered by an insulating sheet.  
In wet places, such as bathrooms or in the rain. When using  
products with weatherproof designs, read their manuals  
as well.  
In places prone to strong vibrations.  
Never drop the camera or subject it to severe shocks or  
vibrations.  
When the camera is mounted on or removed from a tripod,  
adjust the position of the camera using the tripod head. Do not  
twist the camera.  
When carrying the camera, remove all accessories other  
than genuine Olympus accessories, such as a tripod (sold  
separately).  
Batteries whose -terminals are raised, but not  
covered by an insulating sheet.  
Do not touch electric contacts on cameras.  
Do not leave the camera pointed directly at the sun. This may  
cause lens or shutter curtain damage, color failure, ghosting on  
the CCD, or may possibly cause res.  
Do not push or pull severely on the lens.  
Before storing the camera for a long period, remove the  
batteries. Select a cool, dry location for storage to prevent  
condensation or mold from forming inside the camera. After  
storage, test the camera by turning it on and pressing the  
shutter button to make sure that it is operating normally.  
The camera may malfunction if it is used in a location where  
it is subject to a magnetic/electromagnetic eld, radio waves,  
or high voltage, such as near a TV set, microwave, video  
game, loud speakers, large monitor unit, TV/radio tower, or  
transmission towers. In such cases, turn the camera off and on  
again before further operation.  
Batteries whose -terminals are at and not  
completely covered by an insulating sheet. (Such  
batteries cannot be used even if the -terminals  
are partially covered.)  
If NiMH batteries are not charged within the specied time,  
stop charging them and do not use them.  
Do not use a battery if it is cracked or broken.  
If a battery leaks, becomes discolored, deformed or becomes  
abnormal in any other way during operation, stop using the  
camera.  
If a battery leaks uid onto your clothing or skin, remove the  
clothing and ush the affected area with clean, running cold  
water immediately. If the uid burns your skin, seek medical  
attention immediately.  
Never subject batteries to strong shocks or continuous  
vibration.  
Always observe the operating environment restrictions  
described in the camera’s manual.  
Battery Handling Precautions  
Olympus NiMH batteries (included in some areas) are intended  
for use only with Olympus digital cameras. Never use these  
batteries with any other device.  
Always charge NiMH batteries (included in some areas) before  
using them for the rst time, or if they have not been used for  
a long period.  
EN 73  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Always charge sets of batteries (included in some areas) (2  
or 4) together.  
In some cases, alkaline batteries may have a shorter service  
life than NiMH. Alkaline battery performance is limited,  
especially at low temperatures. The use of NiMH batteries is  
recommended.  
The LCD used for the monitor is made with high-precision  
technology. However, black spots or bright spots of light  
may appear constantly on the LCD Monitor. Due to its  
characteristics or the angle at which you are viewing the  
monitor, the spot may not be uniform in color and brightness.  
This is not a malfunction.  
AA manganese (Zinc-Carbon) batteries cannot be used with  
this camera.  
Legal and Other Notices  
When operating the camera with battery power at low  
temperatures, try to keep the camera and spare batteries  
as warm as possible. Batteries which run down at low  
temperatures may be restored after they are warmed at room  
temperature.  
Olympus makes no representations or warranties regarding  
any damages, or benet expected by using this unit lawfully,  
or any request from a third person, which are caused by the  
inappropriate use of this product.  
Olympus makes no representations or warranties regarding  
any damages or any benet expected by using this unit  
lawfully which are caused by erasing picture data.  
Recommended temperature ranges for NiMH batteries:  
Operation  
Charge  
Storage  
0°C to 40°C (32°F to 104°F)  
0°C to 40°C (32°F to 104°F)  
-20°C to 30°C (-4°F to 86°F)  
Disclaimer of Warranty  
Using, charging or storing the batteries outside these ranges  
could shorten battery life or affect battery performance. Always  
unload the batteries from the camera before storing the  
camera for a long period.  
Before using NiMH or NiCd batteries, always read the provided  
instructions.  
The number of pictures you can take may vary depending on  
the shooting conditions or batteries.  
Before going on a long trip, and especially before traveling  
abroad, purchase an ample supply of extra batteries. The  
recommended batteries may be difcult to obtain while  
traveling.  
Olympus makes no representations or warranties, either expressed  
or implied, by or concerning any content of these written materials  
or software, and in no event shall be liable for any implied warranty  
of merchantability or tness for any particular purpose or for  
any consequential, incidental or indirect damages (including  
but not limited to damages for loss of business prots, business  
interruption and loss of business information) arising from the use  
or inability to use these written materials or software or equipment.  
Some countries do not allow the exclusion or limitation of liability for  
consequential or incidental damages or of the implied warranty, so  
the above limitations may not apply to you.  
Please recycle batteries to help save our planet’s resources.  
When you throw away dead batteries, be sure to cover their  
terminals and always observe local laws and regulations.  
Olympus reserves all rights to this manual.  
Warning  
Unauthorized photographing or use of copyrighted material  
may violate applicable copyright laws. Olympus assumes no  
responsibility for unauthorized photographing, use or other acts  
that infringe upon the rights of copyright owners.  
LCD Monitor  
Do not push the monitor forcibly; otherwise the image may  
become vague, resulting in a playback mode failure or damage  
to the monitor.  
A strip of light may appear on the top/bottom of the monitor, but  
this is not a malfunction.  
Copyright Notice  
All rights reserved. No part of these written materials or this  
software may be reproduced or used in any form or by any  
means, electronic or mechanical, including photocopying and  
recording or the use of any type of information storage and  
retrieval system, without the prior written permission of Olympus.  
No liability is assumed with respect to the use of the information  
contained in these written materials or software, or for damages  
resulting from the use of the information contained therein.  
Olympus reserves the right to alter the features and contents of  
this publication or software without obligation or advance notice.  
When a subject is viewed diagonally in the camera, the  
edges may appear zigzagged on the monitor. This is not a  
malfunction; it will be less noticeable in playback mode.  
In places subject to low temperatures, the LCD monitor may  
take a long time to turn on or its color may change temporarily.  
When using the camera in extremely cold places, it is a good  
idea to occasionally place it in a warm place. An LCD monitor  
exhibiting poor performance due to low temperatures will  
recover in normal temperatures.  
74 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FCC Notice  
For customers in North and South America  
Radio and Television Interference  
For customers in USA  
Changes or modications not expressly approved by the  
manufacturer may void the user’s authority to operate this  
equipment. This equipment has been tested and found to  
comply with the limits for a Class B digital device, pursuant  
to Part 15 of the FCC Rules. These limits are designed to  
provide reasonable protection against harmful interference in a  
residential installation.  
This equipment generates, uses, and can radiate radio  
frequency energy and, if not installed and used in accordance  
with the instructions, may cause harmful interference to radio  
communications.  
Declaration of Conformity  
Model Number:  
Trade Name:  
SP-610UZ  
OLYMPUS  
Responsible Party:  
Address:  
3500 Corporate Parkway, P.O. Box 610,  
Center Valley, PA 18034-0610, U.S.A.  
484-896-5000  
Telephone Number:  
Tested To Comply With FCC Standards  
FOR HOME OR OFFICE USE  
However, there is no guarantee that interference will not  
occur in a particular installation. If this equipment does cause  
harmful interference to radio or television reception, which can  
be determined by turning the equipment off and on, the user is  
encouraged to try to correct the interference by one or more of  
the following measures:  
This device complies with Part 15 of the FCC rules. Operation is  
subject to the following two conditions:  
(1) This device may not cause harmful interference.  
(2) This device must accept any interference received, including  
interference that may cause undesired operation.  
Adjust or relocate the receiving antenna.  
For customers in Canada  
This Class B digital apparatus complies with Canadian ICES-  
003.  
Increase the distance between the camera and receiver.  
Connect the equipment to an outlet on a circuit different from  
that to which the receiver is connected.  
Consult your dealer or an experienced radio/TV technician  
for help. Only the OLYMPUS-supplied USB cable should  
be used to connect the camera to USB enabled personal  
computers (PC).  
OLYMPUS WORLDWIDE LIMITED WARRANTY  
- IMAGING PRODUCTS  
Olympus warrants that the enclosed Olympus® imaging  
product(s) and related Olympus® accessories (individually  
a “Product” and collectively the “Products”) will be free from  
defects in materials and workmanship under normal use and  
service for a period of one (1) year from the date of purchase.  
If any Product proves to be defective within the one-year  
warranty period, the customer must return the defective Product  
to any of Olympus Service Centers, following the procedure  
set forth below (See “WHAT TO DO WHEN SERVICE IS  
NEEDED”).  
Olympus, at its sole discretion, will repair, replace, or adjust  
the defective Product, provided that Olympus investigation and  
factory inspection disclose that (a) such defect developed under  
normal and proper use and (b) the Product is covered under this  
limited warranty.  
Any unauthorized changes or modications to this equipment  
would void the user’s authority to operate it.  
Use Only Dedicated Rechargeable Battery,  
Battery Charger and USB-AC adapter (sold  
separately)  
We strongly recommend that you use only the genuine Olympus  
dedicated rechargeable battery, battery charger and USB-AC  
adapter (F-3AC) with this camera. Using a non-genuine  
rechargeable battery, battery charger and/or USB-AC adapter  
(F-3AC) may result in re or personal injury due to leakage,  
heating, ignition or damage to the battery. Olympus does not  
assume any liability for accidents or damage that may result  
from the use of a battery, battery charger and/or USB-AC  
adapter (F-3AC) that are not genuine Olympus accessories.  
EN 75  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Repair, replacement, or adjustment of defective Products shall  
be Olympus’s sole obligation and the customer’s sole remedy  
hereunder.  
The customer is liable and shall pay for shipment of the  
Products to the Olympus Service Center.  
Olympus shall not be obligated to perform preventive  
maintenance, installation, deinstallation, or maintenance.  
Olympus reserves the right to (i) use reconditioned, refurbished,  
and/or serviceable used parts (that meet Olympus’s quality  
assurance standards) for warranty or any other repairs and (ii)  
make any internal or external design and/or feature changes  
on or to its products without any liability to incorporate such  
changes on or to the Products.  
EXCEPT FOR THE LIMITED WARRANTY SET FORTH  
ABOVE, OLYMPUS MAKES NO AND DISCLAIMS ALL OTHER  
REPRESENTATIONS, GUARANTIES, CONDITIONS, AND  
WARRANTIES CONCERNING THE PRODUCTS, WHETHER  
DIRECT OR INDIRECT, EXPRESS OR IMPLIED, OR ARISING  
UNDER ANY STATUTE, ORDINANCE, COMMERCIAL USAGE  
OR OTHERWISE, INCLUDING BUT NOT LIMITED TO ANY  
WARRANTY OR REPRESENTATION AS TO THE SUITABILITY,  
DURABILITY, DESIGN, OPERATION, OR CONDITON OF  
THE PRODUCTS (OR ANY PART THEREOF) OR THE  
MERCHANTABILITY OF THE PRODUCTS OR THEIR FITNESS  
FOR A PARTICULAR PURPOSE, OR RELATING TO THE  
INFRINGEMENT OF ANY PATENT, COPYRIGHT, OR OTHER  
PROPRIETARY RIGHT USED OR INCLUDED THEREIN.  
IF ANY IMPLIED WARRANTIES APPLY AS A MATTER OF LAW,  
THEY ARE LIMITED IN DURATION TO THE LENGTH OF THIS  
LIMITED WARRANTY.  
SOME STATES MAY NOT RECOGNIZE A DISCLAIMER OR  
LIMITATION OF WARRANTIES AND/OR LIMITATION OF  
LIABILITY SO THE ABOVE DISCLAIMERS AND EXCLUSIONS  
MAY NOT APPLY.  
THE CUSTOMER MAY ALSO HAVE DIFFERENT AND/OR  
ADDITIONAL RIGHTS AND REMEDIES THAT VARY FROM  
STATE TO STATE.  
THE CUSTOMER ACKNOWLEDGES AND AGREES THAT  
OLYMPUS SHALL NOT BE RESPONSIBLE FOR ANY  
DAMAGES THAT THE CUSTOMER MAY INCUR FROM  
DELAYED SHIPMENT, PRODUCT FAILURE, PRODUCT  
DESIGN, SELECTION, OR PRODUCTION, IMAGE OR DATA  
LOSS OR IMPAIRMENT OR FROM ANY OTHER CAUSE,  
WHETHER LIABILITY IS ASSERTED IN CONTRACT, TORT  
(INCLUDING NEGLIGENCE AND STRICT PRODUCT  
LIABILITY) OR OTHERWISE. IN NO EVENT SHALL  
OLYMPUS BE LIABLE FOR ANY INDIRECT, INCIDENTAL,  
CONSEQUENTIAL OR SPECIAL DAMAGES OF ANY KIND  
(INCLUDING WITHOUT LIMITATION LOSS OF PROFITS OR  
LOSS OF USE), WHETHER OR NOT OLYMPUS SHALL BE  
OR SHOULD BE AWARE OF THE POSSIBILITY OF SUCH  
POTENTIAL LOSS OR DAMAGE.  
WHAT IS NOT COVERED BY THIS LIMITED  
WARRANTY  
Excluded from this limited warranty and not warranted by  
Olympus in any fashion, either express, implied, or by statute,  
are:  
(a) products and accessories not manufactured by Olympus  
and/or not bearing the “OLYMPUS” brand label (the  
warranty coverage for products and accessories of other  
manufacturers, which may be distributed by Olympus, is the  
responsibility of the manufacturers of such products and  
accessories in accordance with the terms and duration of  
such manufacturers’ warranties);  
(b) any Product which has been disassembled, repaired,  
tampered with, altered, changed, or modied by persons  
other than Olympus’s own authorized service personnel  
unless repair by others is made with the written consent of  
Olympus;  
(c) defects or damage to the Products resulting from wear,  
tear, misuse, abuse, negligence, sand, liquids, impact,  
improper storage, nonperformance of scheduled operator  
and maintenance items, battery leakage, use of non-  
“OLYMPUS” brand accessories, consumables, or supplies,  
or use of the Products in combination with non-compatible  
devices;  
(d) software programs;  
(e) supplies and consumables (including but not limited to  
lamps, ink, paper, lm, prints, negatives, cables and  
batteries); and/or  
(f) Products which do not contain a validly placed and recorded  
Olympus serial number, unless they are a model on which  
Olympus does not place and record serial numbers.  
76 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Representations and warranties made by any person, including  
but not limited to dealers, representatives, salespersons, or  
agents of Olympus, which are inconsistent or in conict with  
or in addition to the terms of this limited warranty, shall not be  
binding upon Olympus unless reduced to writing and approved  
by an expressly authorized ofcer of Olympus.  
This limited warranty is the complete and exclusive statement of  
warranty which Olympus agrees to provide with respect to the  
Products and it shall supersede all prior and contemporaneous  
oral or written agreements, understandings, proposals, and  
communications pertaining to the subject matter hereof.  
This limited warranty is exclusively for the benet of the original  
customer and cannot be transferred or assigned.  
1
2
Sales receipt showing date and place of purchase.  
Copy of this limited warranty bearing the Product serial  
number corresponding to the serial number on the  
Product (unless it is a model on which Olympus does not  
place and record serial numbers).  
A detailed description of the problem.  
Sample prints, negatives, digital prints (or les on disk) if  
available and related to the problem.  
3
4
When service is completed, the Product will be returned to you  
postage prepaid.  
WHERE TO SEND PRODUCT FOR SERVICE  
See “WORLDWIDE WARRANTY” for the nearest service center.  
INTERNATIONAL WARRANTY SERVICE  
International warranty service is available under this warranty.  
WHAT TO DO WHEN SERVICE IS NEEDED  
The customer must transfer any image or other data saved on  
a Product to another image or data storage medium and/or  
remove any lm from the Product prior to sending the Product to  
Olympus for service.  
For customers in Europe  
“CE” mark indicates that this product complies  
with the European requirements for safety,  
health, environment and customer protection.  
“CE” mark cameras are intended for sales in  
Europe.  
IN NO EVENT SHALL OLYMPUS BE RESPONSIBLE FOR  
SAVING, KEEPING OR MAINTAINING ANY IMAGE OR DATA  
SAVED ON A PRODUCT RECEIVED BY IT FOR SERVICE,  
OR ON ANY FILM CONTAINED WITHIN A PRODUCT  
RECEIVED BY IT FOR SERVICE, NOR SHALL OLYMPUS BE  
RESPONSIBLE FOR ANY DAMAGES IN THE EVENT ANY  
IMAGE OR DATA IS LOST OR IMPAIRED WHILE SERVICE IS  
BEING PERFORMED (INCLUDING, WITHOUT LIMITATION,  
DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL OR  
SPECIAL DAMAGES, LOSS OF PROFITS OR LOSS OF USE),  
WHETHER OR NOT OLYMPUS SHALL BE OR SHOULD BE  
AWARE OF THE POSSIBILITY OF SUCH POTENTIAL LOSS  
OR IMPAIRMENT.  
This symbol [crossed-out wheeled bin WEEE  
Annex IV] indicates separate collection of waste  
electrical and electronic equipment in the EU  
countries.  
Please do not throw the equipment into the  
domestic refuse.  
Please use the return and collection systems  
available in your country for the disposal of  
this product.  
Package the Product carefully using ample padding material to  
prevent damage in transit and either deliver it to the Authorized  
Olympus Dealer that sold you the Product or ship it postage  
prepaid and insured to any of our Olympus Service Centers.  
When returning Products for service, your package should  
include the following:  
This symbol [crossed-out wheeled bin  
Directive 2006/66/EC Annex II] indicates  
separate collection of waste batteries in the  
EU countries.  
Please do not throw the batteries into the  
domestic refuse. Please use the return and  
collection systems available in your country for  
the disposal of the waste batteries.  
EN 77  
Download from Www.Somanuals.com. All Manuals Search And Download.  
a. Any defect that occurs due to mishandling (such as an  
operation performed that is not mentioned in the Handling  
Care or other sections of the instructions, etc.)  
b. Any defect that occurs due to repair, modication, cleaning,  
etc. performed by anyone other than Olympus or an  
Olympus authorized service station.  
Provisions of warranty  
1
If this product proves to be defective, although it has been  
used properly (in accordance with the written Handling  
Care and Operating instructions supplied with it), during the  
applicable national warranty period and has been purchased  
from an authorized Olympus distributor within the business  
area of Olympus Europa Holding GmbH as stipulated on  
repaired, or at Olympus’s option replaced, free of charge.  
To claim under this warranty the customer must take the  
product before the end of the applicable national warranty  
period to the dealer where the product was purchased or any  
other Olympus service station within the business area of  
Olympus Europa Holding GmbH as stipulated on the website:  
World Wide Guarantee the customer may turn the product in  
at any Olympus service station. Please notice that not in all  
countries such Olympus service station exists.  
c. Any defect or damage that occurs due to transport, a fall,  
shock, etc. after purchase of the product.  
d. Any defect or damage that occurs due to re, earthquake,  
ood damage, thunderbolt, other natural disasters,  
environmental pollution and irregular voltage sources.  
e. Any defect that occurs due to careless or improper  
storage (such as keeping the product under conditions  
of high temperature and humidity, near insect repellents  
such as naphthalene or harmful drugs, etc.), improper  
maintenance, etc.  
f. Any defect that occurs due to exhausted batteries, etc.  
g. Any defect that occurs due to sand, mud, etc. entering the  
inside of the product casing.  
h. When the Guarantee Certicate is not returned with the  
product.  
i. When any alterations whatsoever are made to the  
Guarantee Certicate regarding the year, month and date  
of purchase, the customer’s name, the dealer’s name, and  
the serial number.  
j. When proof of purchase is not presented with this  
Guarantee Certicate.  
This Guarantee applies to the product only; the Guarantee  
does not apply to any other accessory equipment, such as  
the case, strap, lens cap and batteries.  
Olympus’s sole liability under this Guarantee shall be limited  
to repairing or replacing the product. Any liability under the  
Guarantee for indirect or consequential loss or damage of  
any kind incurred or suffered by the customer due to a defect  
of the product, and in particular any loss or damage caused  
to any lenses, lms, other equipment or accessories used  
with the product or for any loss resulting from a delay in repair  
or loss of data, is excluded. Compelling regulations by law  
remain unaffected by this.  
2
The customer shall transport the product to the dealer or  
Olympus authorized service station at his own risk and shall  
be responsible for any costs incurred in transporting the  
product.  
Provisions of Guarantee  
1
“OLYMPUS IMAGING CORP., Shinjuku Monolith, 2-3-1  
Nishi-Shinjuku, Shinjuku-ku, Tokyo 163-0914, Japan grants a  
one year World Wide Guarantee. This worldwide Guarantee  
must be presented at an Olympus authorized repair service  
station before any repair can be made under conditions  
of this Guarantee. This Guarantee is valid only if the  
Guarantee Certicate and proof of purchase are presented  
at the Olympus repair service station. Please note that this  
Guarantee is in addition to and does not affect the customer’s  
legal warranty rights under the applicable national legislation  
governing the sale of consumer goods mentioned above.  
This Guarantee does not cover the following and the  
customer will be required to pay repair charge, even for  
defects occurring within the Guarantee period referred to  
above.  
3
4
2
78 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
a. Any defect that occurs due to mishandling (such as an  
operation performed that is not mentioned in the Handling  
Care or other sections of the instructions, etc.)  
b. Any defect that occurs due to repair, modication, cleaning,  
etc. performed by anyone other than Olympus or an  
Olympus authorized service station.  
Notes regarding Guarantee maintenance  
1
This Guarantee will only be valid if the Guarantee Certicate  
is duly completed by Olympus or an authorized dealer or  
other documents contain sufcient proof. Therefore, please  
make sure that your name, the name of the dealer, the  
serial number and the year, month and date of purchase  
are all completed or the original invoice or the sales receipt  
(indicating the dealer’s name, the date of purchase and  
product type) is attached to this Guarantee Certicate.  
Olympus reserves the right to refuse free-of-charge service  
if neither Guarantee Certicate is completed nor the above  
document is attached or if the information contained in it is  
incomplete or illegible.  
c. Any defect or damage that occurs due to transport, a fall,  
shock, etc. after purchase of the product.  
d. Any defect or damage that occurs due to re, earthquake,  
ood damage, thunderbolt, other natural disasters,  
environmental pollution and irregular voltage sources.  
e. Any defect that occurs due to careless or improper  
storage (such as keeping the product under conditions  
of high temperature and humidity, near insect repellents  
such as naphthalene or harmful drugs, etc.), improper  
maintenance, etc.  
2
Since this Guarantee Certicate will not be re-issued, keep it  
in a safe place.  
*
com for the authorized international Olympus service  
network.  
f. Any defect that occurs due to exhausted batteries, etc.  
g. Any defect that occurs due to sand, mud, etc. entering the  
inside of the product casing.  
h. When this Warranty Certicate is not returned with the  
product.  
For customers in Asia  
i. When any alterations whatsoever are made to the  
Warranty Certicate regarding the year, month and date of  
purchase, the customer’s name, the dealer’s name, and  
the serial number.  
j. When proof of purchase is not presented with this  
Warranty Certicate.  
This Warranty applies to the product only; the Warranty does  
not apply to any other accessory equipment, such as the  
case, strap, lens cap and batteries.  
Olympus’ sole liability under this warranty shall be limited to  
repairing or replacing the product and any liability for indirect  
or consequential loss or damage of any kind incurred or  
suffered by the customer due to a defect in the product, and  
in particular any loss or damage caused to any lm or lenses  
or other equipment or accessories used with the product or  
for any loss resulting from delay in repair, is excluded.  
Provisions of warranty  
1
lf this product proves to be defective, although it has been  
used properly (in accordance with the written Handling Care  
and Operating instructions supplied with it), during a period  
of up to one year from the date of purchase this product  
will be repaired, or at Olympus’s option replaced, free of  
charge. To claim under warranty the customer must take the  
product and this Warranty certicate before the end of the  
one year warranty period to the dealer where the product was  
purchased or any Olympus authorized service station listed in  
the instructions and request the necessary repairs.  
The customer shall transport the product to the dealer or  
Olympus authorized service station at his own risk and shall  
be responsible for any costs incurred in transporting the  
product.  
4
5
2
3
This warranty does not cover the following and the customer  
will be required to pay repair charge, even for defects  
occurring within the one year period referred to above.  
EN 79  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notes;  
Trademarks  
1
This Warranty is in addition to and does not affect the  
IBM is a registered trademark of International Business  
Machines Corporation.  
Microsoft and Windows are registered trademarks of Microsoft  
Corporation.  
Macintosh is a trademark of Apple Inc.  
The SDHC/SDXC logo is a trademark.  
Eye-Fi is a registered trademark of Eye-Fi, Inc.  
All other company and product names are registered  
trademarks and/or trademarks of their respective owners.  
The standards for camera le systems referred to in this  
manual are the “Design rule for Camera File system/DCF”  
standards stipulated by the Japan Electronics and Information  
Technology Industries Association (JEITA).  
customer’s statutory right.  
2
lf you have any queries regarding this Warranty, call any  
of the Olympus authorized service stations listed in the  
instructions.  
Notes regarding warranty maintenance  
1
This Warranty will only be valid if the Warranty Certicate is  
duly completed by Olympus or the dealer. Make sure that  
your name, the name of the dealer, the serial number and the  
year, month and date of purchase are all completed.  
Since this Warranty Certicate will not be re-issued, keep it in  
a safe place.  
Any request for repair by a customer in same country where  
the product was purchased shall be subject to the terms  
of the warranty issued by the Olympus distributor in that  
country. Where the local Olympus distributor does not issue a  
separate warranty or where the customer is not in the country  
where the product was purchased the terms of this worldwide  
warranty shall apply.  
2
3
THIS PRODUCT IS LICENSED UNDER THE AVC  
PATENT PORTFOLIO LICENSE FOR THE PERSONAL  
AND NONCOMMERCIAL USE OF A CONSUMER TO  
(i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC  
STANDARD (“AVC VIDEO”) AND/OR (ii) DECODE  
AVC VIDEO THAT WAS ENCODED BY A CONSUMER  
ENGAGED IN A PERSONAL AND NON-COMMERCIAL  
ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO  
PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO  
LICENSE IS GRANTED OR SHALL BE IMPLIED FOR  
ANY OTHER USE. ADDITIONAL INFORMATION MAY BE  
OBTAINED FROM MPEG LA, L.L.C. SEE HTTP://WWW.  
MPEGLA.COM  
4
Where applicable, this Warranty is valid worldwide. The  
Olympus authorized service stations listed in this Warranty  
will gladly honor it.  
Please refer to the appended list for the authorized  
international Olympus service network.  
*
Disclaimer of Warranty  
Olympus makes no representations or warranties, either  
expressed or implied, by or concerning any content if these  
written materials or software, and in no event shall be liable  
for any implied warranty of merchantability or tness for any  
particular purpose or for any consequential, incidental or  
indirect damages (including but not limited to damages for loss  
of business prots, business interruption and loss of business  
information) arising from the use of inability to use these written  
materials or software. Some states do not allow the exclusion or  
limitation of liability for consequential or incidental damages, so  
the above limitations may not apply to you.  
The software in this camera may include third party software. Any third  
party software is subject to the terms and conditions, imposed by the  
owners or licensors of that software, under which software is provided  
to you.  
Those terms and other third party software notices, if any, may be found in  
the software notice PDF le stored within the accompanying CD-ROM or at  
notice.cfm  
Powered by ARCSOFT.  
80 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
Camera  
Product type  
:
Digital camera (for shooting and displaying)  
Recording system  
Still pictures  
:
:
:
:
Digital recording, JPEG (in accordance with Design rule for Camera File system (DCF))  
Applicable standards  
3D still image  
Exif 2.2, Digital Print Order Format (DPOF), PRINT Image Matching III, PictBridge  
MP format  
Sound with still  
pictures  
Wave format  
Movie  
:
:
MPEG-4AVC./H.264  
Memory  
Internal memory  
SD/SDHC/SDXC memory card  
Eye-Fi card  
No. of effective pixels  
Image pickup device  
Lens  
:
:
:
14,000,000 pixels  
1/2.3” CCD (primary color lter)  
Olympus lens 5.0 to 110.0 mm, f3.3 to 5.7  
(equivalent to 28 to 616 mm on a 35 mm camera)  
Photometric system  
Shutter speed  
:
:
:
Digital ESP metering, spot metering system  
4 to 1/2000 sec.  
Shooting range  
0.1 m (0.3 ft.) to (W), 1.8 m (5.9 ft.) to (T) (normal)  
0.1 m (0.3 ft.) to (W), 1.8 m (5.9 ft.) to (T) (macro mode)  
0.01 m (0.03 ft.) to (W only) (super macro mode)  
Monitor  
:
:
3.0” TFT color LCD display, 230,000 dots  
Connector  
DC-IN jack, USB connector, A/V OUT jack (Multi-connector)/  
HDMI micro connector (type D)  
Automatic calendar system  
Operating environment  
Temperature  
:
:
2000 up to 2099  
0 °C to 40 °C (32 °F to 104 °F) (operation)/  
-20 °C to 60 °C (-4 °F to 140 °F) (storage)  
Humidity  
Power supply  
Dimensions  
:
:
:
30 % to 90 % (operation)/10 % to 90 % (storage)  
AA alkaline/NiMH battery (four) or separately sold USB-AC adapter  
107.4 mm (W) × 72.6 mm (H) × 73.2 mm (D)  
(4.2 × 2.8 × 2.9 in.) (excluding protrusions)  
Weight  
:
405 g (14.3 oz) (including battery and card)  
Design and specications subject to change without notice.  
EN 81  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HDMI, the HDMI Logo and High-Denition Multimedia  
Interface are trademarks or registered trademarks of  
HDMI Licensing LLC.  
82 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VN821801  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Miele Refrigerator KFN 14943 SDE ED User Manual
Mr Coffee Coffeemaker Urt85 User Manual
Musical Fidelity TV Converter Box X 24K User Manual
NETGEAR Network Router DG834PN User Manual
New Transducers CRT Television 42PF9830 10 User Manual
Nortel Networks Network Router NN46110 602 User Manual
Optimus Cassette Player SCP 88 User Manual
Palm Cell Phone Accessories 3404WW User Manual
Panasonic Air Compressor DA57C84RCU6 User Manual
Panasonic Projector D6KE User Manual