LINEAR PCM RECORDER
LS-20M
LDineEar PTCMAReIcoLrdeEr D
INSTRUCTIONS
EN
Thank you for purchasing an Olympus Digital Voice Recorder. Please read these instructions for
information about using the product correctly and safely.
Keep the instructions handy for future reference. To ensure successful recordings,
we recommend that you test the record function and volume before use.
Register your product on www.olympus-consumer.com/register
and get additional benefits from Olympus!
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of contents
To play back movies on a TV .................................................. 56
Checking.the.contents.of.the.box...................................11
Ejecting an SD card................................................................ 27
.Rec.Menu...................................................................... 65
.Recording.Settings.................................................... 68
.File.Menu..................................................................... 72
.LCD/Sound.Menu........................................................ 73
.Device.Menu................................................................ 74
Voice sync recording [V-Sync. Rec] A................................... 76
Rearranging files [Replace] A n....................................... 78
C
J
#
!
D
E
Connecting.to.your.PC....................................................90
Disconnecting from your PC.................................................. 91
Transfer.the.voice.files.to.your.PC..................................92
Using.as.PC.camera........................................................95
6 Other information
Alarm.message.list........................................................96
Troubleshooting............................................................98
Accessories.(optional)..................................................101
EN
ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety precautions
Before using your new recorder, read this
manual carefully to ensure that you know how
to operate it safely and correctly. Keep this
manual in an easily accessible location for
future reference.
The warning symbols indicate important
safety related information. To protect yourself
and others from personal injury or damage to
property, it is essential that you always read the
warnings and information provided.
Caution for usage environment
•
To protect the high-precision technology
contained in this product, never leave
the recorder in the places listed below,
no matter if in use or storage:
•
•
Places where temperatures and/or humidity
are high or go through extreme changes.
Direct sunlight, beaches, locked cars, or near
other heat sources (stove, radiator, etc.) or
humidifiers.
•
•
•
In sandy or dusty environments.
Near flammable items or explosives.
In wet places, such as bathrooms or in the
rain. When using products with weatherproof
designs, read their manuals as well.
In places prone to strong vibrations.
f Danger
If the product is used without
observing the information given
under this symbol, serious injury
or death may result.
•
•
•
Never drop the recorder or subject it to
severe shocks or vibrations.
The recorder may malfunction if it is
used in a location where it is subject to
a magnetic/ electromagnetic field, radio
waves, or high voltage, such as near a
TV set, microwave, video game, loud
speakers, large monitor unit, TV/radio
tower, or transmission towers. In such
cases, turn the recorder off and on again
before further operation.
f Warning
If the product is used without
observing the information given
under this symbol, injury or
death may result.
f Caution
•
Avoid recording or playing back near
cellular phones or other wireless
equipment, as they may cause
interference and noise. If you experience
noise, move to another place, or move
the recorder further away from such
equipment.
Do not use organic solvents such as
alcohol and lacquer thinner to clean the
unit.
When attaching this recorder to a
tripod, be sure to rotate only the screw
of the tripod in the tripod socket of this
recorder. Never rotate the recorder.
If the product is used without
observing the information
given under this symbol, minor
personal injury, damage to the
equipment, or loss of valuable
data may result.
•
•
EN
ꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety precautions
Warning regarding data loss:
f Caution:
•
Recorded content in memory may be
•
Stop using the recorder immediately if
you notice any unusual odors, noise, or
smoke around it.
destroyed or erased by operating mistakes,
unit malfunction, or during repair work. It is
recommended to back up and save important
content to other media such as a computer hard
disk.
Never remove the batteries with bare hands,
which may cause a fire or burn your hands.
•
•
Be careful with the strap.
•
Any liability for passive damages or damage of
any kind occurred due to data loss incurred by a
defect of the product, repair performed by the
third party other than Olympus or an Olympus
authorized service station, or any other reasons
is excluded from the Olympus’s liability.
Be careful with the strap when you carry the
recorder. It could easily catch on stray objects
and cause serious damage.
Do not leave the recorder in places
where it may be subject to extremely
high temperatures.
Handling the recorder
Doing so may cause parts to deteriorate and, in
some circumstances, cause the recorder to catch
fire. Do not use the charger or AC adapter if it
is covered (such as a blanket). This could cause
overheating, resulting in fire.
f Warning:
•
Do not use the recorder near flammable
or explosive gases.
•
Handle the recorder with care to avoid
•
Keep young children and infants away
from the recorder.
getting a low-temperature burn.
•
•
When the recorder contains metal parts,
overheating can result in a low-temperature
burn. Pay attention to the following:
When used for a long period, the recorder
will get hot. If you hold on to the recorder in
this state, a low-temperature burn may be
caused.
Always use and store the recorder out of the reach
of young children and infants to prevent the
following dangerous situations which could cause
serious injury:
1Becoming entangled in the recorder strap,
causing strangulation.
2Accidentally swallowing the battery, cards or
other small parts.
3Accidentally being injured by the moving
parts of the recorder.
•
In places subject to extremely cold
temperatures, the temperature of the
recorder’s body may be lower than the
environmental temperature. If possible, wear
gloves when handling the recorder in cold
temperatures.
•
•
•
Do not use or store the recorder in
dusty or humid places.
Do not disassemble, repair or modify
the unit yourself.
Use SD/SDHC memory cards only.
Never use other types of cards.
If you accidentally insert another type of
card into the recorder, contact an authorized
distributor or service center. Do not try to
remove the card by force.
•
Do not operate the unit while operating
a vehicle (such as a bicycle, motorcycle,
or car).
EN
ꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety precautions
f Warning:
Battery handling precautions
•
•
Keep batteries dry at all times.
Follow these important guidelines to prevent
batteries from leaking, overheating, burning,
exploding, or causing electrical shocks or
burns.
If rechargeable batteries have not been
recharged within the specified time,
stop charging them and do not use
them.
•
•
•
Do not use a battery if it is cracked or
broken.
f Danger:
•
The recorder uses a lithium ion battery
specified by Olympus. Charge the
battery with the specified AC adapter
or charger. Do not use any other AC
adapters or chargers.
Never subject batteries to strong shocks
or continuous vibration.
If a battery leaks, becomes discolored or
deformed, or becomes abnormal in any
other way during operation, stop using
the recorder.
If a battery leaks fluid onto your clothing
or skin, remove the clothing and flush
the affected area with clean, running
cold water immediately. If the fluid
burns your skin, seek medical attention
immediately.
Keep battery out of the reach of
children.
If you notice anything unusual when
using this product such as abnormal
noise, heat, smoke, or a burning odor:
1remove the battery immediately while being
careful not to burn yourself, and;
•
Batteries should never be exposed
to flame, heated, short-circuited or
disassembled.
•
•
•
Never heat or incinerate batteries.
Take precautions when carrying or
storing batteries to prevent them from
coming into contact with any metal
objects such as jewelry, pins, fasteners,
etc.
•
•
•
•
Never store batteries where they will be
exposed to direct sunlight, or subjected
to high temperatures in a hot vehicle,
near a heat source, etc.
To prevent causing battery leaks or
damaging their terminals, carefully
follow all instructions regarding the
use of batteries. Never attempt to
disassemble a battery or modify it in any
way, solder, etc.
Do not connect the battery directly to a
power outlet or a cigarette lighter of an
automobile.
2call your dealer or local Olympus
representative for service.
f Caution:
•
Please recycle batteries to help save
our planet’s resources. When you throw
away dead batteries, be sure to cover
their terminals and always observe local
laws and regulations.
Always charge a rechargeable battery
when using it for the first time, or if it
has not been used for a long period.
•
•
If a battery fluid gets into your eyes,
flush your eyes immediately with clear,
cold running water and seek medical
attention immediately.
•
EN
ꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety precautions
•
•
Rechargeable battery have limited
lifetime. When the operating
time becomes shorter even if the
rechargeable battery is fully charged
under the specified condition, replace it
with a new one.
The battery may become hot during
prolonged use. To avoid minor burns, do
not remove it immediately after using
the recorder.
In case
• ... the internal parts of the AC adapter are
exposed because it has been dropped or
otherwise damaged:
• ... the AC adapter is dropped in water, or
if water, metal flammable substances
or other foreign objects get inside it:
• ... you notice anything unusual when
using the AC adapter such as abnormal
noise, heat, smoke, or a burning odor:
1do not touch any of the exposed parts;
2immediately disconnect the power supply
plug from the power outlet, and;
3callyourdealerorlocalOlympusrepresentative
for servicing. Continued use of the AC adapter
under these circumstances could result in
electric shock, fire or injury.
AC.adapter
f Danger:
•
Be sure to use the AC adapter with the
proper voltage (AC 100 - 240 V). Using
it with other voltage levels may cause
fire, explosion, overheating, electric
shock or injury.
For safety, be sure to unplug the
AC adapter from the outlet before
performing maintenance or cleaning.
Also, never plug in or disconnect the
power plug with a wet hand. This may
cause electric shock or injury.
f Caution:
•
Do not use the AC adapter if the power
plug is damaged or the plug is not
completely connected to the outlet.
This may cause fire, overheating,
electric shock, short circuit or damage.
Unplug the AC adapter from AC outlet
when not using. If this precaution is not
followed, fire, overheating or electric
shock may occur.
•
•
•
f Warning:
•
Do not attempt to disassemble, repair
or modify the AC adapter in any way.
Keep foreign objects including water,
metal, or flammable substances from
getting inside the product.
Do not moisten the AC adapter or
touch it with a wet hand.
Do not use the AC adapter in the
vicinity of flammable gas (including
gasoline, benzine and lacquer thinner).
Make sure to hold the plug when
removing the power plug from
•
the outlet. Do not bend the cord
excessively or put a heavy object on
it. This may cause fire, overheating,
electric shock or damage.
If something appears to be wrong with
the AC adapter, unplug the AC adapter
from the outlet and consult your
nearest service center. Using the AC
adapter may cause fire, overheating,
electric shock or injury.
•
•
•
EN
ꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety precautions
•
Do not use or keep the AC adapter
in very hot places, such as in direct
sunlight, in a closed car on a sunny day,
near a heater, on an electric carpet, etc.
Do not use the AC adapter if something
is covering it (such as a blanket). This
may cause fire, explosion, leakage or
overheating.
LCD.monitor
•
The LCD used for the monitor is made
with high-precision technology.
However, black spots or bright spots of
light may appear constantly on the LCD
Monitor. Due to its characteristics or
the angle at which you are viewing the
monitor, the spot may not be uniform
in color and brightness. This is not a
malfunction.
EN
ꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
Main features
s Using the visualizer, 5 types of video
patterns can be displayed on the LCD while
playing back voice files recorded with the
recorder (☞ P.71).
s Supports high capacity recording media.
Capable of recording onto commercially
available SD cards (☞ P.27).
s Equipped with a variety of features that
support audio recording.
With this recorder you can customize a variety of
recording functions such as the recording level
and microphone sensitivity to suit the recording
conditions and personal preferences (☞ P.65 ~
P.66).
s Equipped with a variety of features to
improve video shooting. When using this
recorder as a camera, you can customize a
variety of shooting functions according to
the scene (☞ P. 68 ~ P.70).
s Allows you to move or copy files within the
folders of an SD card (☞ P. 79).
s You can divide files (☞ P.81), or delete part
of a file (☞ P.61) recorded in PCM format in
this recorder.
s Index mark features allow you to quickly
find desired locations (☞ P.52).
s Shoots full high definition videos at the
high resolution of 1920 x 1080 pixels.
You can change the shooting resolution
according to your usage (☞ P.68).
s Adopts the MPEG-4 AVC and H.264 formats
for video recording. This also allows you to
enjoy high-resolution images on a PC or a
large-screen TV.
s Allows you to upload movie files to video
sites, to easily share them with the world
through the Internet. Supports the
640x480 (30fps/ mp3) video format suitable
for uploading video files (☞ P.68).
s Incorporates a digital zoom function. This
allows you to clearly capture subjects that
are far away from you (☞ P.45).
s Utilizes a high sensitivity, low noise stereo
microphone capable of faithfully capturing
the original sound.
Fixing the stereo microphones at a 45° angle
enables recording with a natural and expansive
stereo feel.
s The recording format, without compressing
the original sound recording, "Linear PCM
format, " and capable of efficient record
"MP3 format" support. Scene can be
recorded in a wide range of high quality
(☞ P.65).
Capable of realistically recording various
different sound sources. High resolution
recording at a high sampling frequency and bit
count equivalent or superior to that of a music
CD (Sampling frequency 44.1 kHz, Bit count
16bit) is possible.
1
s Supports USB 2.0. Hi-Speed, which enables
high-speed data transmission as an
external memory device for your computer.
s It has a USB charging function (☞ P.19).
s It has a 2.0 inch QVGA color LCD panel.
s Allows you to connect the recorder to a PC
and to use it as a PC camera (☞ P.95).
Capable of recording natural sound for various
purposes, including recording the practicing of
a musical instrument.
s You can playback WAV and MP3 format files
transferred from a computer in addition to
files recorded by the device itself.
This allows you to use this recorder as a music
player.
EN
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Checking the contents of the box
The following items are included with the recorder.
If anything is missing or damaged, contact the dealer from whom you purchased the recorder.
LOCK
1
SD card
Voice Recorder
USB cable
•
•
Warranty card
USB-AC adapter (F-3AC)
Contents may vary depending on purchase
location.
•
Warranty differs depending on purchase
location. Warranty card may not be included.
Note
•
Be sure to use the included dedicated USB cable
and AC adapter. If any other company’s cable is
used, it may lead to malfunction of the recorder.
Also, never use this dedicated cable with any
other company’s products.
Instructions
EN
Lithium ion battery (LI-42B)
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Identification of parts
1
2
3
4
p
o
-
i
5
1
u
r
=
(
)
6
7
q
w
*
&
^
8
e
9
0
%
y
!
$
t
@
#
1Built-in stereo microphone(R)
2Built-in stereo microphone(L)
3PEAK/LED indicator light (LED)
4Lens
*STOP (4) button
(Card cover
)Mode switch (A/n)
-Strap hole
5Main LCD (LCD panel)
6Sub LCD (LCD panel)
7+ button
=MIC (Microphone) jack
(MIC/LINE-IN)
qEAR (Earphone) jack
wPOWER/HOLD switch
eREMOTE jack
8`OK button
9REC (s) (Record) button
Recording/Shooting indicator light
(LED)
Connect the receiver for the exclusive remote
control set RS30W (optional). This enables
operation of the start and stop recording/
shooting functions through the remote control.
09 button
!LIST button
rConnector cover
tHDMI micro connector
yUSB connector
uBattery cover lock button
iBattery cover
oTripod socket
pBuilt-in speaker
@MENU button
#A-B REPEAT button
$– button
%Fn button
^ERASE button
EN
&0 button
1ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Identification of parts
Display (LCD panel)
4 A mode [Recorder] mode display:
Folder list display
File display
1
2
1
1
2
3
4
5
6
1Root folder indicator
2Folder name
1Battery indicator
2Current file number/
File list display
Total number of recorded files in the
folder
3Remaining recording time/
File length
1
4Recorder status indicator
[K]: Record indicator
2
3
≠
L
[
[
]: Pause indicator
]: Stop indicator
[•]: Play indicator
[ß]: Forwarding indicator
™
[
]: Rewinding indicator
5
Level meter
6Elapsed recording time/
Elapsed playback time
1Current folder name
2File name
EN
3Guide indicator
1ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Identification of parts
4 A mode [Music] mode display:
1Current folder name
List display 1
2File name
3Guide indicator
1
2
File display
1
3
1
2
3
When there are files and folders in the folder
4
5
6
1Current folder name
2Folder name/File name
3Guide indicator
1Battery indicator
2Current file number/
List display 2
Total number of recorded files in the
folder
1
3File length
4Recorder status indicator
L
[
]: Stop indicator
2
3
[•]: Play indicator
[ß]: Forwarding indicator
[™]: Rewinding indicator
5
Level meter
6Elapsed playback time
EN
When there are only files in the folder
1ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Identification of parts
4 n mode [Movie] mode display:
Folder list display
File display
1
2
1
1
2
3
4
5
6
7
8
1Root folder indicator
2Folder name
1Shooting mode indicator
2Icon display
3Battery indicator
4Current file number/
Total number of recorded files in the
folder
5Remaining shooting time/
File length
6Recorder status indicator
[K]: Shooting indicator
[≠]: Pause indicator
[L]: Stop indicator
[•]: Play indicator
File list display
1
2
3
[ß]: Forwarding indicator
[™]: Rewinding indicator
7
Level meter
8Elapsed shooting time/
Elapsed playback time
1Current folder name
2File name
3Guide indicator
EN
1ꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Identification of parts
4 Icon display:
About the two LCD displays
1
^
The recorder has two displays, the main LCD and
the sub LCD, utilized differently depending on
mode and function.
1
2
3
A
mode
During recording or playback:
%
$
•
During recording or playback, the
main LCD is off and only the sub LCD is
on.
4
5 678 90!@ #
When operation is stopped:
•
When operation is stopped, both the
main LCD and sub LCD are on.
1Shooting mode (s) (
)
n
Menu settings:
When you switch to the menu
2Recording Level (
)
i
•
3Zoom (
)/ Volume (
)
h
g
settings, both the main LCD and sub
LCD are on.
4Microphone Sensitivity ( )(
)
q r
5Low Cut Filter (c)
6Limiter (
)
[
7
Voice Sync
(
)
Z
n
mode
8Equalizer ( ) ( ) ( ) ( )
‘
]
^
_
9Playback Mode (
) (
) (
)
Y
X
W
During shooting or playback:
0Self timer ( )(
)
j k
•
During shooting or playback, both
the main LCD and sub LCD are on.
However, when the [Main LCD
Display] setting of [Recording
Settings] is set to [Off], both the LCDs
are off during shooting. (☞ P.68).
!White balance ( )( )( )( )( )(
)
{ ; < : = |
@Metering ( )(
)
u v
#Exposure compensation (
)
y
$Image stabilization (
)
I
%Fn button Function (
)
H
When operation is stopped:
^Reverse Angle Recording (
)
o
•
When operation is stopped, both the
main LCD and sub LCD are on.
Menu settings:
When you switch to the menu
•
settings, both the main LCD and sub
LCD are on.
EN
1ꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Power supply
ꢁ
Close the battery cover by pressing in
direction A and sliding in direction B.
Inserting the battery
This recorder uses a lithium ion battery specified
by Olympus (LI-42B). Do not use any other type of
battery.
The supplied rechargeable battery
is not fully charged. Before using the
unit the first time or after long periods
of disuse, it is recommended that you
charge it until full (☞ P.19).
1
1
Slide the battery cover lock button in
the direction indicated by the arrow.
4
Completely close the battery cover by
sliding its lock button in the direction
indicated by the arrow.
ꢀ
With the back label of the battery
facing up, line up the terminals of
the recorder and battery. Insert the
battery by sliding in direction A while
pushing down in direction B.
•
Be careful of the direction of the battery
when inserting it.
•
Verify that the battery lock cover button is
locked.
EN
1ꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
Power supply
Notes
•
•
Be sure to turn off the power of the recorder
before replacing the battery. Unloading the
battery while the recorder is in use may cause
a malfunction such as corrupting the file, etc. If
you take out the battery while operating, you
will lose your currently recorded file because the
file header will not be able to close.
If it takes longer than 15 minutes to replace the
dead battery or if you take the battery in and
out repeatedly at short intervals, you may have
to reset the time when you have loaded fresh
battery.
1
•
•
Remove the battery if you are not going to use
the recorder for an extended period of time.
When replacing rechargeable battery, be sure
to use lithium ion battery (LI-42B) specified
by Olympus. The use of other manufacturers'
products can damage the recorder and should
be avoided.
•
Lithium ion battery is self discharging. After
unpacking this product, charge the supplied
lithium ion battery before using the recorder for
the first time.
EN
1ꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Power supply
ꢂ
The charging process will start.
Charging by connecting to a computer
via USB
You can charge the battery by connecting to a
PC's USB port. When charging, be sure to correctly
place the rechargeable battery (supplied) into the
recorder (☞ P.17).
1
Before connecting the USB cable, exit
.ꢃ Charging is completed when [Battery
Full] is displayed.
HOLD mode (☞ P.24).
Charging time: approximately 2 hours *
1
ꢀ
Boot the PC.
*
It shows the approximate time when
charging the rechargeable battery fully
from no remaining power at the room
temperature. The charging time will be
changed depending on the remaining
amount and the state of battery.
Connect the USB cable to the USB port
of the PC.
ꢁ
While the recorder is during stop mode
or turned off, connect the USB cable to
the connecting terminal on the bottom
of the recorder.
Battery indicator
The battery indicator on the sub LCD changes
as the battery lose power.
•
•
When [æ] appears on the sub LCD, charging
the battery as soon as possible. When the
battery is too weak, [s] and [Battery Low]
will appear on the display and the recorder
will shut down.
While charging, the battery indicator
constantly changes and does not show the
actual amount of power remaining.
EN
1ꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
Power supply
ꢁ
While the recorder is during stop mode
or turned off, connect the USB cable to
the connecting terminal on the bottom
of the recorder.
Connect to the USB-AC adapter to charge
It can be charged by connecting to the USB-AC
adapter (F-3AC).
To the USB
connector
•
•
Before connecting the AC adapter,
switch the USB connection setting to
[AC Adapter] (☞ P.84).
Before connecting the USB cable, exit
HOLD mode (☞ P.24).
1
1
Plug the recorder’s USB cable into the
AC adapter.
ꢂ
Press the `OK button to start
charging.
To the USB-AC
adapter’s (F-3AC) USB
connector
•
While [Press OK to start charging] is
flashing, press the `OK button.
ꢀ
Connect the AC cable to the AC
adapter, and then to an AC outlet.
ꢃ
Charging is completed when [Battery
Full] is displayed.
To the
AC outlet
EN
ꢀ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Power supply
Notes
•
In case you would like to charge using the [PC
Camera] setting, select [Optional] in the USB
connection settings, then connect the USB cable
to the recorder. Select [AC Adapter] at the [USB
Connect] display to start charging (☞ P.84).
•
•
Charging is not possible during recording,
shooting or playback.
When playing a voice/music file, the recorder
may be reset due to the reduction of the voltage
output of the battery depending on the volume
level even if [º] is displayed in the battery
indicator. In this case, lower the volume of the
recorder.
Cautions concerning the rechargeable battery
1
•
•
Do not put in or take out the battery or AC adapter
when the recorder power is on or when this
recorder is connected to another device. It may
cause problems with the values and functions set
in the recorder.
The charger can be used within the range of AC 100
V to AC 240 V (50/60 Hz). When using the charger
abroad, you may need a plug adapter to convert
the plug to the shape of the AC wall outlet. For
details, ask at your local electrical shop or travel
agent.
Read the following descriptions carefully when you
use the lithium ion battery (LI-42B).
Discharging:
The rechargeable battery self-discharge while
this is not in use. Be sure to charge them regularly
before use.
Operating temperature:
The rechargeable battery is chemical products.
The rechargeable battery efficiency may fluctuate
even when operating within the recommended
temperature range. This is an inherent nature of
such products.
•
•
Do not use travel voltage converters as they could
damage your charger.
The recorder cannot be charged when the PC is
not turned on. It may not also be charged when
the PC is in standby, hibernate, or sleep mode.
Do not charge the recorder with the USB hub
connected.
You cannot charge when [ø]*1 or [√]*2
blinks. Charge the battery at a temperature in
the range of 5°C to 35°C (41°F to 95°F).
*1 [ø]: When the surrounding temperature
is low.
Recommended temperature range:
When operating appliance:
0°C - 42°C/ 32°F - 107.6°F
Charging:
5°C - 35°C/ 41°F - 95°F
Storage for a long period:
–20°C - 30°C/ –4°F - 86°F
Using the rechargeable battery outside the
above temperature range may result in declining
efficiency and shorter battery life. In order to
prevent battery leakage or rust, remove the
rechargeable battery from the products when you
will not be using them for a long time, and store
them separately.
•
•
*2 [√]: When the surrounding temperature
is high.
•
•
•
When using time becomes notably short even
after the battery is fully charged, replace them
with new ones.
Be sure to push the USB connector all the way
in. Otherwise, the recorder may not operate
properly.
Selecting [PC Camera] in the USB connection
settings will prevent the recorder to charge
via USB. Select [Storage class] in the USB
connection settings if you would like to charge
(☞ P.84).
EN
ꢀ1
Download from Www.Somanuals.com. All Manuals Search And Download.
Power supply
Notes
•
This recorder is designed to fully charge battery
regardless of their energy level. However, for
best results when charging newly purchased
rechargeable battery that have not been used
for a long time (more than one month), it is
recommended to fully charge the battery then
discharge repeatedly for 2 to 3 times.
1
•
•
When disposing rechargeable battery, always
observe the local laws and regulations. Contact
your local recycling center for proper disposal
methods.
If lithium ion battery is not fully discharged,
protect against short-circuiting (e.g. by taping
the contacts) before disposing.
For customers in Germany:
Olympus has a contract with the GRS (Joint Battery
Disposal Association) in Germany to ensure
environmentally friendly disposal.
EN
ꢀꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Power supply
Turning on/off the power
When the recorder is not being used, turn the power off to reduce battery consumption to a minimum. Even if
the power is turned off, existing data, mode settings, and clock settings will be maintained.
Turning on the power
Turning off the power
While the recorder is turned off, slide the
POWER/HOLD switch to the direction of
the arrow.
Slide the POWER/HOLD switch to the
direction of the arrow, and hold it for 0.5
seconds or longer.
1
•
The display will turn on, and the power will be
turned on.
•
•
The display shuts off, and the power will be
turned off.
The resume function remembers the stop
position before the power is turned off.
Auto Power Off mode
If the recorder is stopped/not used for over 10
minutes (default) while the power is turned on,
the power will be turned off (☞ P.74).
•
To exit Auto Power Off mode , turn on the
power again.
EN
ꢀꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
HOLD
If you set the recorder to HOLD mode, the running conditions will be preserved, and all buttons will be
disabled. This feature is useful when the recorder has to be carried in a bag or pocket. This mode can also
prevent you from accidentally stopping recording or shooting.
Set the recorder to HOLD mode
Exit HOLD mode
Slide the POWER/HOLD switch to the
[HOLD] position.
Slide the POWER/HOLD switch to the A
position.
1
•
After [Hold] appears on the sub LCD, the
recorder is set to HOLD mode.
Notes
•
•
If you press any button in HOLD mode, the clock display lights for 2 seconds, but it will not operate the
recorder.
If HOLD is applied during operation of the recorder, operation is disabled and the operation state is
preserved (if playback has ended or recording or shooting has ended due to the remaining memory being
used up, the recorder will enter the stopped state).
EN
•
The recorder can be effectively operated via the exclusive remote control set RS30W (optional), even when
it is in HOLD mode.
ꢀꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting time and date [Time & Date]
Setting the time and date beforehand enables
easier file management.
ꢀ
Press the + or − button to set.
The recorder stores the time information
automatically with the recording.
When you use the recorder for the first
time after purchasing it, or when the
battery have been inserted without the
device having been used in a long time, the
[Set Time & Date] will appear. When the
“Hour” is flashing, conduct the setup from
Step 1.
1
•
•
Follow the same steps by pressing the 9
or 0 button to select the next item, and
pressing the + or − button to set.
You can select between 12 and 24 hour
display by pressing the LIST button while
setting the hour and minute.
Example: 10:38 P.M
10:38 PM
(Initial setting)
22:38
•
You can select the order of the “Month”,
“Day” and “Year” by pressing the LIST
button while setting them.
Example: March 24, 2011
3M 24D 2011Y
(Initial setting)
24D 3M 2011Y
2011Y 3M 24D
+− button
9 0 button
`OK button
ꢁ
Press the `OK button to complete the
setting.
1
Press the 9 or 0 button to select
the item to set.
•
Select the item from the “Hour”, “Minute”,
“Year”, “Month” and “Day” with a flashing
point.
•
The clock will start from the set date and
time. Press the `OK button according to the
time signal.
EN
ꢀꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting time and date [Time & Date]
Note
•
If you press the ` OK button during the setup
operation, the recorder will save the items that
were set to that point.
Changing the time and date
ꢁ
ꢂ
Press the `OK button to move the
1
cursor to the item to set.
While the recorder is during stop mode, press
and hold the STOP (4) button to display the
Time and Date, Remaining Memory and File
Format. If the current time and date is not
correct, set it using the procedure below.
•
[Device Menu] will appear on the display.
Press the + or − button to select [Time
& Date].
ꢃ
Press the `OK button.
•
•
[Time & Date] will appear on the display.
The “Hour” will flash on the display,
indicating the start of the Time and Date
setup process.
+ − button
`OK button
MENU button
1
ꢀ
While the recorder is during stop
The following steps are the same as Step 1
through Step 3 of “Setting time and date
[Time & Date]” (☞ P.25).
mode, press the MENU button.
•
The menu will appear on the display
(☞ P.63).
ꢄ
Press the MENU button to close the
menu screen.
Press the + or − button to select
[Device Menu] tab.
•
You can change the menu display by moving
the settings tab cursor.
EN
ꢀꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Inserting and ejecting an SD card
The “SD” indicated in the instruction manual
refers to both SD and SDHC. You can use any
commercially available SD card with the recorder.
ꢁ
Close the card cover securely.
Inserting an SD card
1
While the recorder is during stop
mode, open the card cover.
1
Note
•
In some cases SD cards which have been
formatted (initialized) by another device, such as
a computer, may not be recognized. Be sure to
format SD cards with this recorder before using
them (☞ P.86).
ꢀ
Face the SD card in the correct way and
insert into the card slot as shown in the
diagram.
Ejecting an SD card
•
Insert the SD card keeping it straight.
1
While the recorder is during stop
mode, open the card cover.
L
O
C
K
•
•
Inserting the SD card in the wrong way or at
an angle could damage the contact area or
cause the SD card to jam.
If the SD card is not inserted all the way, data
may not be written to the SD card.
EN
ꢀꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
Inserting and ejecting an SD card
•
•
The processing performance reduces in an SD
card when you repeat writing and deleting. In
this case, format the SD card (☞ P.86).
There is no guarantee that all SD cards work with
the recorder.
ꢀ
Push the SD card inward to unlock it,
and let it eject partially.
About the SD Card
1
When the SD card is write protected, there will
be a display reading [SD card is locked]. Before
inserting the card, turn off the write protection
function.
L
O
C
K
If the write protection
switch is facing the
[LOCK] direction,
•
The SD card is visibly out of the slot and can
be removed safely.
recording and other
LOCK
functions cannot be
carried out.
ꢁ
Close the card cover securely.
See the Olympus support homepage for a
list of SD cards verified for this recorder in
accordance with the Olympus standards.
http://olympus-europa.com/
Although verified SD card makers are shown
on the Olympus homepage, Olympus doesn’t
guarantee compatibility in all cases.
Also, according to changes in card
specifications, support may become no longer
available.
Notes
•
•
Releasing your finger quickly after pushing the
SD card inward may cause it to eject forcefully
out of the slot.
Depending on the SD card maker or type, some
SD cards may not be recognized properly due to
incompatibility issues with the recorder.
Be sure to read the instruction manual supplied
with the SD card before using it.
In the case when the SD card cannot be
recognized, remove the SD card then put it in
again to see if this recorder recognizes the SD
card.
•
•
EN
ꢀꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on the folders
The SD card can be used for the recording media. Voice files, movie files, and music files are sorted and saved
into their respective folders, organized in a tree structure.
About the folders for voice recordings
[Folder A] - [Folder E] within the [Root] folder are the folders for voice recordings. When recording with this
recorder, select any one of the five folders and then record.
1
Each folder can
store up to 999
files.
001
002
001
003
Root
Folder A
Folder B
Folder C
Folder D
Folder E
Folder
File
999
Note
•
Files or folders located under the folder [Root] will not be indicated on the recorder.
EN
ꢀꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on the folders
About the folders for movie shootings
Movie files recorded with the LS-20M are stored into folders created under the [DCIM] folder using the
recording date.
Each folder can store up to
9999 files.
1
First layer
Second layer
001
002
003
Root
DCIM
Movie100
Movie101
Movie102
Folder
File
9999
Movie999
Edit
When you divide a file, a new number
is assigned to it and it is saved into the
[Edit] folder.
EN
ꢁ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on the folders
About the folder for music playback
When transferring music files to the device using Windows Media Player, a folder is automatically created
within the music playback folder which has a layered structure as shown in the diagram below. Music files that
are in the same folder can be rearranged in preferential order and replayed (☞ P.78).
1
Each folder can store up to 999 files.
First layer
Second layer
Third layer
001
002
003
004
005
Root
Music
Artist 01
Album 01
Artist 02
Artist 03
Album 02
Album 03
Up to 128 folders can be created
under the [Music] folder,
including [Music].
Folder
File
999
EN
ꢁ1
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the folders and files
Please change folders only when the recorder's operation is stopped. For information on the layered
structure of the folders, see the section entitled “Notes on the folders” (☞ P.29 ~ P.31).
n
mode [Operation of the folders for
movie shootings]
A
mode [Operation of the folders for
voice recordings]
1
Folder list
display
File list display
Folder list
display
File list display
A
mode [Operation of the folders for music playbacks]
Folder list
display
Folder list
display
(First layer)
Folder list
display
(Second layer)
File list display
Moving through the levels
}Return: LIST button
+ or – button
Each time you press this it returns up one level.
The 0 button can also serve as the LIST
button on a list display.
Select the folder or file.
List display:
The folders and files recorded in this recorder
are displayed.
{Proceed: `OK button
Each time you press this it opens the folder or
file selected in the list display and proceeds
down one level.
•
The 9 button can also serve as the `OK
button on a list display.
EN
ꢁꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching between voice and movie mode
The recorder has two modes: voice recorder and
movie recorder. Select the mode according to the
purpose of use.
About the functions of each mode
When the switch is at the A position:
You can record voice and
save the data to the [Folder
A] through [Folder E]
1
Slide the mode switch to A or n.
folders for voice recording,
and play the voice files you
recorded with the recorder.
Music files transferred to
the [Music] folder of the
recorder can also be played
(☞ P.29, P.31).
The mode switch does not work while
the recorder is performing operations
such as recording, shooting, and
playback. Stop the recorder or turn off
the power and then change the mode.
1
When the switch is at the n position:
You can shoot movies and
save the data to the [DCIM]
folder dedicated to movie
files, and play the movie
files you shot (☞ P.30).
About the icons used in this manual
Indicates an operation or
setting that is possible when
the mode switch is at the voice
mode position.
A
Indicates an operation or
setting that is possible when
the mode switch is at the movie
mode position.
Note
•
If you change the position of the mode switch
while the recorder is operating, the recorder
will continue the operation but will change the
mode automatically once the operation has
stopped.
n
Indicates an operation or setting
that is possible when the mode
switch is at either voice mode or
movie mode position.
n
A
EN
ꢁꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
About recording/shooting
Before recording A
Getting Ready
Changing modes:
Select the recording format:
Recording can be performed through the
linear PCM format, as well as the MP3 formats
(☞ P.65).
Slide the mode switch on the recorder to A
(☞ P.33).
2
Turn the microphone toward the original sound source
Turn the built-in stereo microphone in the direction that you would like to record. Placing the built-in stereo
microphone over the display is the proper position for performing stereo recording. If it is below the display
when recording then proper stereo recording cannot be performed because the position of the original sound
will be recorded in reverse phase.
About the built-in stereo microphone:
The extension of the microphone sensitivity can be
adjusted by changing the [Mic Sense] setting to
[High] or [Low] (☞ P.65).
Original
sound
source
MIC SENSE HIGH
MIC SENSE LOW
L
R
Key map
On mounting:
When recording with the built-in microphone:
Turn the microphone in the direction of the source
to be recorded.
Accurate adjustments of the microphone’s angle
and the like can be made when the device is
affixed to a commercially available tripod used for
cameras.
EN
ꢁꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording A
Before starting recording, select a folder among
[Folder A] to [Folder E]. These five folders can
be selectively used to distinguish the kind of
recording; for example, Folder [Folder A] might
be used to store private information, while Folder
[Folder B] might be dedicated to holding business
information.
•
•
The recording/shooting indicator light will
flash and [≠] will appear on the sub LCD.
The main LCD turns off.
aRemaining recording time
bFile number
cLevel meter (changes according to the
recording level and recording function
settings)
•
The voice sync level can be set when voice
sync recording is on (☞ P.76).
[Rec Mode] cannot be changed in the
recording standby mode or while recording.
Configure this while the recorder is stopped
(☞ P.65).
This recorder is designed to be able to
record cleanly and evenly, even in recording
conditions such as when the volume of
the source sound changes significantly.
However, even higher sound quality
recordings can be achieved by adjusting the
recording level manually (☞ P.65).
STOP (4) button
•
2
REC (s) button
•
9 0 button
1
Select the recording folder (☞ P.32).
ꢁ
Press the 9 or 0 button to adjust
the recording level.
•
•
The level can be adjusted from [01] to [12].
The higher the number, the higher the level
and the larger the indicator position on the
level meter.
ꢀ
Press the REC (s) button to prepare
recording.
If too big sound is input, the noise may
occur even if [Rec Level] is set to [Auto]
or [Limiter ON] (☞ P.65). Also, in certain
cases the PEAK/LED indicator light, which
notifies large input, may not light. To ensure
successful recordings, we recommend that
you test the record function and volume
before use.
•
When [Rec Level] is set to [Auto]
the recording level will be adjusted
automatically. Set [Rec Level] to [Manual]
when using the recording level adjustment
function and the limiter function (☞ P.65).
a
b
EN
c
ꢁꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording A
Actually producing the sound you would
like to record:
ꢃ
Press the STOP (4) button to stop
recording.
•
When a loud sound is produced the level
meter will swing all the way over to the right
while recording and the PEAK/LED indicator
light will turn on. When this happens
the sound will be recorded in a distorted
manner since the recording level is too high.
e
2
When the level meter is maxed out
(the recorded sounds will be distorted).
•
[L] will appear on the sub LCD.
eFile length
•
When a loud noise is produced, adjust the
recording level so that the level meter does
not exceed [6dB].
Notes
•
•
•
To ensure that you do not lose the beginning
of the recording, confirm that the recording is
activated by checking the recording/shooting
indicator or the mode indicator in the sub LCD.
When remaining recording time is less than 60
seconds, the PEAK/LED indicator light starts
flashing. When the recording time is decreasing
to 30 or 10 seconds, the light flashes faster.
[Folder Full] will appear when the recording
cannot be made any further. Select other folder
or delete any unnecessary files before recording
(☞ P.58).
Example of conditions where the
recording level has been lowered and the
excess input has been adjusted.
ꢂ
Press the REC (s) button to start
recording.
•
•
[Memory Full] will appear when there is no
free space. Delete any unnecessary files before
recording any further (☞ P.58).
If the REC (s) button is pressed when a function
other than the record function is specified,
[Cannot record in this folder] is displayed.
Select a folder from [Folder A] through [Folder
E] and start recording again.
Depending on the sound recording mode and
the status of record media, the data transfer
to the media cannot be done in time during
recording and the skipped sound may be
recorded. In this case, [Data Write Error] will
appear during recording or when the recording
is finished. After transferring the data to the PC,
format the record media.
d
•
•
The recording/shooting indicator light
grows and [K] will appear on the sub LCD.
dElapsed recording time
EN
ꢁꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording A
•
•
We recommend formatting the record media in
the recorder before recording (☞ P.86).
Pressing once the recording button of the
optional exclusive remote control RS30W
(☞ P.101) will make the recording start
immediately.
File names will be automatically created for
files recorded by this recorder.
LS20 0001 .WAV
1
2
3
About recordings in linear PCM format
exceeding ꢀGB:
1User ID:
The user ID name that has been set on the
Digital Voice Recorder.
The recording will continue even if the volume
of a single file exceeds 2 GB in the linear PCM
format recording.
2
2File number:
A file number is consecutively assigned.
•
The file is saved every 2 GB in separate files.
It will be treated as multiple files when
playing back.
3Extension:
These are the file name extensions for the
recording format when recording with
this device.
•
When the recording exceeds 2 GB, the
number of files in the folder may exceed
999 files. The 1000th file and later will not
be recognized by the recorder, so check by
connecting the recorder to a PC.
It is possible to record a maximum of 24
hours continuously.
•
•
Linear PCM format .WAV
MP3 format .MP3
•
Pause
While the recorder is during recording
mode, press the REC (s) button.
•
•
[≠] will appear on the sub LCD.
The recorder will time out after 60 minutes
when left in [Rec Pause].
Resume Recording:
Press the REC (s) button again.
EN
•
Recording will resume at the point of
interruption.
ꢁꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording A
Listening while audio is recorded (REC Monitor)
Settings relating to Recording
If you start recording after inserting the earphone
into the EAR jack on the recorder, you can hear
the sound being recorded. The recording monitor
volume can be adjusted by pressing the + or −
button.
Connect the earphone to the EAR jack on
the recorder.
[Mic Sense]
Sets the recording sensitivity.
(☞ P.65)
[Rec Mode]
(☞ P.65)
Sets the recording rate for
each recording format.
You can configure whether
to adjust the recording level
automatically or to adjust it
manually.
[Rec Level]
(☞ P.65)
•
After recording has started, you can hear the
sound being recorded through the earphone.
2
This function can reduce
[Low Cut Filter] noise from air conditioners,
(☞ P.66)
projectors and other similar
noises.
[Self Timer]
(☞ P.66)
Sets the self-timer function.
To EAR jack
Select whether or not to
output the recording monitor
sound from the EAR jack.
[Rec Monitor]
(☞ P.67)
Select whether or not to use
the plug-in power function
according to the external
microphone connected to the
MIC jack.
[Plug-inPower]
(☞ P.67)
Notes
Select whether to connect an
external device to the MIC
jack to use it as a LINE IN jack
for recording, or to connect
an external microphone for
recording.
•
•
•
•
Recording level cannot be controlled using the
volume button.
To avoid irritation to the ear, insert the earphone
after turning down the volume level.
Do not place earphones near a microphone as
this may cause feedback.
When the external speaker is connected while
recording, there is a risk that audio feedback
will occur. It is recommended that you use
earphones for the recording monitor, or turn
[Rec Monitor] to [Off] while recording (☞ P.67).
[Input Jack]
(☞ P.67)
[V-Sync. Rec]
(☞ P.76)
Sets the start level for voice
sync recording.
EN
ꢁꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording A
Recommended settings by recording condition
The recorder is initially set to [PCM 44.1kHz] mode so that you can make high quality stereo recordings
immediately after purchasing it. The various functions relating to recording can be configured in detail to suit
the recording conditions. The following table shows the recommended settings for some example recording
conditions. Configure the functions to suit the actual recording conditions.
Recording condition
Outdoor
Conferences
Band
environment
sounds like wild
birds singing,
railroad noises,
etc.
Recording
settings
2
Indoor
musical
performance
Performance
in a vast hall,
etc.
with large
crowds in
Conferences
with a few
performance
in a practice
studio
vast meeting people indoors
venues
Recording
level*
When the [Rec Level] is set to [Manual] you can adjust the recording level.
Adjust while looking at the level meter.
(
P.65)
☞
[Mic Sense]
P.65)
[Low]
[High]
(
☞
[Low Cut
Filter]
[Off] or [100Hz]
[300Hz]
(
P.66)
☞
[Rec Mode]
P.65)
The recording level can be adjusted to suit the volume of the original sound
(
☞
You can configure whether to adjust the recording level automatically or to adjust it manually.
[Rec Level]*
P.65)
(
☞
When [Rec Level] is set to [Manual] you can configure the limiter function.
[Rec
Monitor]
Select whether or not to output the recording monitor sound from the EAR jack.
(
P.67)
☞
[Plug-
Select whether or not to use the plug-in power function according to the external microphone
connected to the MIC jack.
inPower]
(
P.67)
☞
*
When [Rec Level] is set to [Auto] the recording level will be adjusted automatically. When this happens, the
recording level adjustment function and limiter function will not work (☞ P.65).
EN
ꢁꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording A
Recording from external microphone or
other devices
The external microphone and other devices can
be connected and the sound can be recorded.
Connect as follows according to a device to be
used.
Compact zoom microphone (unidirectional):
ME32
The microphone is integrated with a tripod,
making it suitable to place on a table and
record conferences or lecture from a distance.
Highly sensitive noise-cancellation monaural
microphone (unidirectional): ME52W
This microphone is used to record sound at a
distance while minimizing surrounding noise.
•
Do not plug and unplug devices into the
recorder’s jack while it is recording.
Tie clip microphone (omni-directional): ME15
Before you connect an external
microphone to the MIC jack, change the
[Input Jack] setting to [Microphone]
(☞ P.67).
2
Small concealing microphone with a tie-clip.
Telephone pickup: TP7
Earphone type microphone can be plugged
into your ear while phoning. The voice or
conversation over the phone can be clearly
recorded.
Recording with external microphone:
Connect an external microphone to the
MIC jack of the recorder.
Notes
•
•
The built-in microphone will become inoperable
when an external microphone is plugged into
the recorder’s MIC jack.
To MIC jack
Microphones supported by plug-in power can
also be used. When the plug-in power function
is set to [On] power will be supplied by the
recorder to the microphone (☞ P.67).
Turn the plug-in power function to [Off] when
an external microphone not supported by
plug-in power is connected, as there is the risk
that noise may be generated while recording
(☞ P.67).
•
Applicable external microphones
(optional) (☞ P.101)
2-channel microphone (omni-directional):
ME30W
These are highly sensitive omni-directional
microphones supported by plug-in power
which are well-suited to recording musical
performances.
Compact Gun Microphone (unidirectional):
ME31
The directional microphones useful for
recordings such as outdoor recording of wild
birds singing.
EN
ꢂ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording A
Recording the sound of other devices with
this recorder:
The sound can be recorded when connecting to
the audio output terminal (earphone jack) of the
other device and the MIC jack of the recorder with
the connecting cord KA333 (optional) for dubbing.
Recording the sound of this recorder with
other devices:
•
The sound of this recorder can be recorded
using another device. In order to do so, connect
the recorder’s EAR jack to the other device’s
audio input terminal (MIC jack) using the
connecting cord KA334 (optional) for dubbing.
When connecting to another device with
no LINE IN jack but only a MIC IN, use the
connecting cord KA333 (optional) equipped
with a resistance attenuator for dubbing.
•
Before you connect an external
microphone to the MIC jack, change the
[Input Jack] setting to [Line] (☞ P.67).
2
To audio output
terminal of other
devices
To audio input
terminal of other
devices
To EAR jack
To MIC jack
Note
Note
•
When you adjust the sound quality settings
related to playback on the recorder, the audio
output signal sent out from the EAR jack will
change as well (☞ P.71).
•
If you are unable to produce a clear recording
with this recorder even after adjusting the
recording level (☞ P.65), this could potentially
be because the output level for the connected
devices is too high or too low. When external
devices are connected, perform a test recording
and then adjust the output level for the external
devices.
EN
ꢂ1
Download from Www.Somanuals.com. All Manuals Search And Download.
Before shooting movies n
Getting Ready
Changing modes:
Select the image quality:
Set the movie resolution and recording format
according to the content you want to shoot and
its length (☞ P.68).
Slide the mode switch on the recorder to n
(☞ P.33).
2
Point the lens toward the subject
Point the lens toward the subject you want to shoot. You can verify the images you are shooting using the
main LCD. While shooting, high-quality sound can be recorded using thee built-in stereo microphone.
Subject
On mounting:
Accurate adjustments of the microphone’s angle
and the like can be made when the device is
affixed to a commercially available tripod used for
cameras.
EN
ꢂꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting movies n
ꢀ
Press the 9 or 0 button to adjust
the recording level of sound (☞ P.35).
STOP (4) button
REC (s) button
e
9 0 button
1
Press the REC (s) button to prepare
shooting.
2
eRecording level guide indicator
a
ꢁ
Press the REC (s) button to start
shooting.
f
b
c
d
•
•
The recording/shooting indicator light will
flash and [≠] will appear on the sub LCD.
[Image Quality] cannot be changed in the
shooting standby mode or while shooting.
Configure this while the recorder is stopped
(☞ P.68).
•
•
The recording/shooting indicator light
grows and [K] will appear on the sub LCD.
Sound will also be recorded.
aShooting mode (Shooting paused state)
bRemaining shooting time
cFile number
fShooting mode (Shooting state)
dLevel meter (changes according to the
recording level and recording function
settings)
EN
ꢂꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting movies n
•
•
We recommend formatting the record media in
the recorder before shooting (☞ P.86).
Pressing once the recording button of the
optional exclusive remote control RS30W
(☞ P.101) will make the shooting start
immediately.
ꢂ
Press the STOP (4) button to stop
shooting.
g
About shooting that exceeds ꢂ GB:
If the size of a single file exceeds 4 GB,
shooting will stop.
2
•
[L] will appear on the sub LCD.
gFile length
Notes
•
•
•
To ensure that you do not lose the beginning
of the recording, confirm that the shooting is
activated by checking the recording/shooting
indicator or the mode indicator in the sub LCD.
When remaining recording time is less than 60
seconds, the PEAK/LED indicator light starts
flashing. When the recording time is decreasing
to 30 or 10 seconds, the light flashes faster.
[Folder Full] will appear when the recording
cannot be made any further. Select other folder
or delete any unnecessary files before recording
(☞ P.58).
•
•
[Memory Full] will appear when there is no
free space. Delete any unnecessary files before
recording any further (☞ P.58).
Depending on the image quality and the status
of the recording media, data may not be able
to be transferred in time to the recording
media while shooting. This may result in sound
skipping. In such a case, [Data Write Error]
will appear during shooting or when shooting
finishes. After transferring the data to a PC,
format the recording media.
EN
ꢂꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting movies n
Adjusting the volume
Using the zoom
1
Press the `OK button during shooting
to change the function of the + and −
buttons.
1
Press the `OK button during shooting
to change the function of the + and −
buttons.
2
a
a
aVolume control indicator
aZoom indicator
ꢀ
Press the + or − button to adjust the
ꢀ
Press the + or − button during
shooting to adjust the shooting range.
[+]: Switches to telephoto screen.
volume.
•
The volume can be adjusted within a range
from [00] to [30].
[−]: Switches to wide angle screen.
Zoom bar
•
When you start using the zoom, the zoom
bar is displayed on the main LCD.
EN
ꢂꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting movies n
Shooting using the recorder upside down
This function is useful while recording in an
environment where there are many people around
you, or where it is difficult to fit the subject in the
viewfinder when shooting.
During upside down recording,
the main LCD.
is displayed on
o
Set the [Reverse Angle Recording] to
[On] before shooting with the recorder
upside down (☞ P.68).
2
Settings relating to shooting
Shooting with the reverse angle recording function:
When using the recorder upside down like shown
in the picture, the left and right channel of the
built-in stereo microphone are automatically
reversed, so you can shoot in the same way you do
during normal conditions.
Select the desired settings according the shooting
environment and purpose of use (☞ P.68 ~ P.70).
Set the resolution and the
[Image Quality]
sound quality of the movie
(☞ P.68)
you will shoot.
[Main LCD
Set whether to turn the main
Display]
L
LCD on or off during shooting.
(☞ P.68)
[Reverse Angle
Set shooting with the recorder
Recording]
turned upside down.
(☞ P.68)
R
[Magic Movie]
(☞ P.69)
Use special effects to shoot
rich and expressive movies.
Normal shooting
Minimize the blur caused by
the recorder’s shakings or
by the subject’s movements
during shooting.
[Image
Stabilizer]
(☞ P.69)
R
Upside down
recording
[Metering]
(☞ P.69)
Select the range for metering
brightness.
L
Set the white balance
according to the shooting
scene.
[White Balance]
(☞ P.69)
[Exposure
Comp.]
Set an appropriate exposure.
Set the shooting sensitivity.
(☞ P.70)
[High ISO
Mode]
(☞ P.70)
EN
ꢂꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting movies n
Shooting’s recorded sound settings
File names will be automatically created for
files shooting by this recorder.
Configure the settings of the sound recorded
during shooting (☞ P.65 ~ P.67). It is convenient to
use these settings in combination with [Recording
Settings].
PB03 0001 .MOV
[Mic Sense]
Sets the recording sensitivity.
(☞ P.65)
1 2
3
4
You can configure whether
1Month:
1 to C (A=October, B=November,
C=December).
2Day:
01 to 31.
3File number:
A file number is consecutively
assigned.
[Rec Level]
to adjust the recording level
automatically or to adjust it
manually.
(☞ P.65)
2
This function can reduce
[Low Cut Filter] noise from air conditioners,
(☞ P.66)
projectors and other similar
noises.
[Self Timer]
(☞ P.66)
4Extension:
The file name extensions of the movie
files shot using the recorder.
Sets the self-timer function.
Select whether or not to
output the recording monitor
sound from the EAR jack.
[Rec Monitor]
(☞ P.67)
•
MOV format .MOV
Select whether or not to use
the plug-in power function
according to the external
microphone connected to the
MIC jack.
[Plug-inPower]
(☞ P.67)
Select whether to connect an
external device to the MIC
jack to use it as a LINE IN jack
for recording, or to connect
an external microphone for
recording.
[Input Jack]
(☞ P.67)
Recording from external microphone
You can connect an external microphone to record
sound. Do not plug or unplug a device into/from
the recorder’s jack during shooting. For details on
how to connect an external microphone and the
external microphones that can be used with the
recorder, see ☞ P.40.
EN
ꢂꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
About playback
Playback A
The recorder can play WAV and MP3 format files. To
playback a file recorded with other machines, you
need to transfer (copy) it from a computer.
•
•
[•] will appear on the sub LCD.
When playback starts, the main LCD turns
off.
aFile length
bFile number
cLevel meter
dElapsed playback time
STOP (4) button
ꢁ
ꢂ
Press the + or − button to adjust to a
comfortable listening volume.
+ − button
•
The volume can be adjusted within a range
from [00] to [30].
3
`OK button
1
Select the file to be played back from
the folder which contains it (☞ P.32).
Press the STOP (4) button at any point
you want to stop playback.
ꢀ
Press the `OK button to start
playback.
•
•
[L] will appear on the sub LCD.
This will stop the file being played back
midway. When the resume function is
activated the stopped location will be
registered, even if the power is turned
off. The next time the power is turned
on, playback may be resumed from the
registered stopped location.
a
b
EN
c
d
ꢂꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback A
Settings relating to playback
Forwarding
[Play Mode]
(☞ P.71)
You can select the playback mode
that fits your preference.
If you change the equalizer setting,
you can enjoy the music with your
favorite sound quality.
[Equalizer]
(☞ P.71)
[Visualizer]
(☞ P.71)
You can enjoy watching images
during the playback of voice files.
While the recorder is during stop mode in
the file display, press and hold the 9
button.
Note
3
•
When the [Visualizer] setting in the [Play
Menu] is set to [On], the set visualizer effect is
displayed on the main LCD during the playback
of voice files (☞ P.71).
•
•
[ß] will appear on the sub LCD.
If you release the 9 button, it will stop. Press
the `OK button to start playback from where it
was stopped.
While the recorder is during playback
Playback through earphone
mode, press and hold the 9 button.
An earphone can be connected to the EAR jack of
the recorder for listening.
When the earphone is used, the recorder
speaker will be switched-off.
•
•
•
When you release the 9 button the recorder
will resume normal playback.
•
If there is an index mark in the middle of the file,
the recorder will stop at that location (☞ P.52).
The recorder stops when it reaches the end of
the file. Continue pressing the 9 button to
proceed with the cue from the beginning of the
next file.
To EAR jack
Notes
•
•
To avoid irritation to the ear, insert the earphone
after turning down the volume level.
When you listen with the earphone during
playback, do not raise the volume too much. It
may cause hearing impairment and decrease in
hearing ability.
EN
ꢂꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback A
Rewinding
Locating the beginning of a file
While the recorder is during stop mode in
the file display, press and hold the 0
button.
While the recorder is during playback
mode, press the 9 button.
3
•
The recorder skips to the beginning of the next
file.
•
•
[™] will appear on the sub LCD.
If you release the 0 button, it will stop. Press
the `OK button to start playback from where it
was stopped.
While the recorder is during playback
mode, press the 0 button.
•
The recorder skips to the beginning of the
current file.
While the recorder is during playback
mode, press and hold the 0 button.
While the recorder is during playback
mode, press the 0 button twice.
•
•
•
When you release the 0 button the recorder
will resume normal playback.
•
The recorder skips to the beginning of the
previous file.
If there is an index mark in the middle of the file,
the recorder will stop at that location (☞ P.52).
The recorder stops when it reaches the
beginning of the file. Continue pressing the
0 button to proceed with the review from
the end of the previous file.
Note
•
When you skip to the beginning of the file
during playback, the recorder will stop at the
position of the index mark. The index mark will
be skipped when you perform the operation in
stop mode (☞ P.52).
EN
ꢃ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback A
About music file
In cases where the recorder is unable to playback
music files that have been transferred to it, check
to make sure that the sampling rate and bit rate
are in the range where playback is possible.
Combinations of sampling rates and bit rates for
music files which the recorder can playback are
given below.
Sampling
frequency
File format
Bit rate
44.1 kHz, 48 kHz,
88.2 kHz, 96 kHz
16 bit or
24 bit
WAV format
MPEG1 Layer3:
32 kHz, 44.1 kHz,
48 kHz
MPEG2 Layer3:
16 kHz, 22.05 kHz,
24 kHz
3
From 8 kbps up to
320 kbps
MP3 format
•
•
•
Variable bit rate MP3 files (in which conversion
bit rates can vary) may not be played back
properly.
For WAV files, this recorder can only
play back those in the linear PCM format. WAV
files other than these cannot be played back.
Even if the format of the file is compatible for
playback on this recorder, the recorder does not
support every encoder.
EN
ꢃ1
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting an index mark A
Setting an index mark
Clearing an index mark
If index marks is placed, you can quickly find a
location you want to listen to in fast forward and
fast rewind and when cuing a file. Index marks
can be added only during PCM recording with
this recorder or to PCM files recorded using this
recorder.
1
Select a file in which index marks you
wish to erase are contained.
ꢀ
Press the 9 or 0 button to select
the index mark to erase.
•
To add index marks, the index
function must be registered to the Fn
button (☞ P.74).
3
1
Press the Fn button at the position you
want to add an index mark.
ꢁ
While the index number is displayed
for approximately 2 seconds on the
sub LCD, press the ERASE button.
•
A number appears on the sub LCD and an
index mark will be placed.
•
The index mark is erased.
•
Even after an index mark is placed,
recording, shooting or playback will
continue so you can place index marks in
other locations in a similar manner.
•
Index numbers after the erased index
number will be automatically decreased by 1.
Notes
•
•
During recording or playback, the main LCD is
off.
Up to 16 index marks can be set in a file. If you
try to place more than 16 index marks, the
[Index Full] message will appear for index
marks.
•
•
Index marks cannot be set or erased in a locked
file (☞ P.72).
An index mark cannot be added to a movie file
shot with the recorder or a file in MP3 format.
EN
ꢃꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing movies n
You can play movie files shot with the recorder. The
recorder can also be connected to a TV so that you
can enjoy high definition movies on a large screen.
•
[•] will appear on the sub LCD.
aFile length
bFile number
cLevel meter
dElapsed playback time
ꢁ
ꢂ
Press the + or − button to adjust to a
STOP (4) button
comfortable listening volume.
•
The volume can be adjusted within a range
from [00] to [30].
+ − button
`OK button
3
Press the STOP (4) button at any point
1
Select the movie file to play (☞ P.32).
you want to stop playback.
•
[L] will appear on the sub LCD.
ꢀ
Press the `OK button to start
playback.
Note
•
Movies shot with a device other than the
recorder or movie files imported from a PC may
not play correctly.
a
b
c
d
EN
ꢃꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing movies n
Forwarding
Rewinding
While the recorder is during stop mode in
the file display, press and hold the 9
button.
While the recorder is during stop mode in
the file display, press and hold the 0
button.
3
•
•
[ß] will appear on the sub LCD.
If you release the 9 button, it will stop. Press
the `OK button to start playback from where it
was stopped.
•
•
[™] will appear on the sub LCD.
If you release the 0 button, it will stop. Press
the `OK button to start playback from where it
was stopped.
While the recorder is during playback
mode, press and hold the 9 button.
While the recorder is during playback
mode, press and hold the 0 button.
•
When you release the 9 button the recorder
will resume normal playback.
•
When you release the 0 button the recorder
will resume normal playback.
•
The recorder stops when it reaches the end of
the file. Continue pressing the 9 button to
proceed with the cue from the beginning of the
next file.
•
The recorder stops when it reaches the
beginning of the file. Continue pressing the
0 button to proceed with the review from
the end of the previous file.
EN
ꢃꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing movies n
Locating the beginning of a file
While the recorder is during playback
mode, press the 9 button.
3
•
The recorder skips to the beginning of the next
file.
While the recorder is during playback
mode, press the 0 button.
•
The recorder skips to the beginning of the
current file.
While the recorder is during playback
mode, press the 0 button twice.
•
The recorder skips to the beginning of the
previous file.
EN
ꢃꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing movies n
Notes
To play back movies on a TV
You can use any commercially available HDMI mini
cable (Type D) to connect the recorder to a high
definition compatible TV.
•
The TV video signal system varies depending on
the countries and regions. Change the output
signal setting in the [HDMI] setting of the
recorder to match the signal of the TV (☞ P.74).
For details on changing the input setting of the
TV, refer to the TV’s instruction manual.
Use an HDMI cable that matches the HDMI
micro connector on the recorder and the HDMI
connector on the TV.
Depending on the TV’s settings, the displayed
images and information may become cropped.
It is not possible to record sound and shoot
movies while the recorder is connected via
HDMI cable.
•
•
Turn off the power of the recorder and
TV before connecting them.
•
•
Connecting with HDMI mini cable
3
HDMI micro connector
•
•
Do not connect the recorder to another
HDMI output device. Doing so may result in a
malfunction.
When the recorder is connected to the
computer by the USB cable, do not connect the
HDMI cable to the recorder.
•
•
The main LCD does not turn on while the
recorder is connected via HDMI cable.
When connecting the recorder to a TV that
supports the sampling rate outputs of 96kHz
and 88.2kHz, the sound will be output only from
the TV speaker, and not from the recorder's
speaker or the headphones.
When connecting the recorder to a TV that does
not support the sampling rate outputs of 96kHz
and 88.2kHz, the sound will be output only from
the recorder's speaker or the headphones, and
not from the TV speaker.
HDMI cable
1
ꢀ
ꢁ
Connect the HDMI mini cable to the
HDMI connector on the TV.
•
Connect the HDMI mini cable to the
HDMI connector on the recorder.
Turn on the TV and switch [Input] to
[HDMI].
ꢂ
ꢃ
ꢄ
Turn on the recorder.
Select the video file to play (☞ P.32).
Press the `OK button to start
playback.
EN
ꢃꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
How to begin segment repeat playback A n
This function enables repeated playback of part of
the file being played.
Note
•
If an index mark is placed or cleared during
segment repeat playback, segment repeat
playback will be canceled and it will return to
normal playback mode (☞ P.52).
Canceling the segment repeat playback function
A-B REPEAT
button
3
1
ꢀ
Select a file that has a segment you
would like to play back repeatedly, and
start playback.
Press the A-B REPEAT button at the
point you want to start segment repeat
playback.
Pressing any of the following buttons will
release the segment repeat playback.
aPress the `OK or STOP (4) button
Pressing the `OK or STOP (4) button will
release segment repeat playback, and stop
playback.
•
[w] will flash on the sub LCD.
bPress the 9 button
Pressing the 9 button will release segment
repeat playback, and make the recorder to skip
to the beginning of the next file.
cPress the 0 button
Pressing the 0 button will release segment
repeat playback, and make the recorder to skip
to the beginning of the current file.
dPress the A-B REPEAT button
Pressing the A-B REPEAT button will release
segment repeat playback, and it will return to
normal playback mode.
•
•
Fast forwarding and rewinding can be
conducted when [w] is flashing in the same
manner as during normal playback, and
you can quickly proceed as far as the end
position (☞ P.49).
When it reaches the end of the file while [w]
is flashing, point [x] becomes the end of
the file, and repeat playback will start.
ꢁ
Press the A-B REPEAT button again at
the position where you want to end
segment repeat playback.
•
The recorder continuously plays back the
segment until the segment repeat playback
is canceled.
EN
ꢃꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
Erasing A n
ꢁ
Press the + or − button to select
[File Erase].
Erasing files
A selected file can be erased from a folder.
+ − button
`OK button
ERASE button
3
ꢂ
Press the `OK button.
1
Select the file you want to erase
(☞ P.32).
ꢃ
Press the + button to select [Start].
ꢀ
While the recorder is during stop mode
in the file list display, press the ERASE
button.
EN
•
If an action is not selected within 8 seconds,
the recorder will return to stop mode.
ꢃꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Erasing A n
ꢄ
Press the `OK button.
Erasing all files in a folder
All files in a folder can be erased simultaneously.
+ − button
`OK button
ERASE button
3
1
Select the folder you want to erase
(☞ P.32).
•
•
The display changes to [Erase!] and erasing
will start.
[Erase Done] is displayed when the file is
erased. File numbers will be reassigned
automatically.
ꢀ
While the recorder is during stop mode
in the folder list display, press the
ERASE button.
EN
•
If an action is not selected within 8 seconds,
the recorder will return to stop mode.
ꢃꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
Erasing A n
ꢁ
Press the + or − button to select [Erase
in Folder].
ꢄ
Press the `OK button.
3
ꢂ
Press the `OK button.
•
•
The display changes to [Erase!] and erasing
will start.
[Erase Done] is displayed when the folder is
erased.
ꢃ
Press the + button to select [Start].
EN
ꢄ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Erasing A n
ꢁ
In the position you want to end partial
erase, press the ERASE button again.
Partially erasing a file
An unwanted part of a file can be erased.
It is recommended to make a copy of the
original file before partially erasing it
(☞ P.79, P.92).
3
•
[Start point] and [End point] on the sub
LCD flash alternatively.
ERASE button
ꢂ
Press the ERASE button.
1
ꢀ
Play the file you want to partially
erase.
Forward a file to the position that shall be
erased. If the file is long, use the 9 button
to move to the position you want to delete.
•
In the starting position of the partial
erase, press the ERASE button.
•
The display will switch to [Partial erasing
!] and start the partial erase. The deletion
is completed when [Partial erase
completed.] is displayed.
•
•
[Erase start] will flash on the sub LCD.
While [Erase start] is flashing, playback
continues and you can rewind or fast-
forward as usual to locate the erase end
position quickly. If the end of the file is
reached while this indication is flashing, that
position will become the erase end position.
•
•
Playback will stop at the end location of the
partial erase.
If you do not press the ERASE button within
8 seconds, the partial erase operation will
be canceled and the recorder will return to
playback mode.
EN
ꢄ1
Download from Www.Somanuals.com. All Manuals Search And Download.
Erasing A n
Notes
•
•
•
You cannot recover a file once it has been
erased. Please check carefully before erasing.
The file creation date will not change even if the
file is partially erased.
When you partially erase a movie file, the
selected start position and end position may be
offset by up to approximately 1 second.
The locked files and files set as read-only cannot
be erased (☞ P.72).
If there is a file that cannot be recognized by the
recorder, the file and the folder which contains
that file will not be erased. Please connect the
recorder to your PC to erase.
•
•
3
•
It may take over 10 seconds to complete
processing. Never perform operations such as
the following while processing, as they may
damage the data.
1Disconnect the AC Adapter while processing.
2Remove the battery while processing.
3Remove the SD card while processing.
In addition, carefully check the remaining
battery level in order to ensure that the battery
will not run out while processing.
EN
ꢄꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu setting
Menu setting method
Items in menus are categorized by tabs, so select a
tab first and move to a desired item to quickly set
it. You can set each menu item as follows.
ꢁ
ꢂ
ꢃ
ꢄ
Press the `OK button to move the
cursor to the item to set.
+ − button
`OK button
Press the + or − button to move to the
item you want to set.
MENU button
4
1
While the recorder is during stop
mode, press the MENU button.
Press the `OK or 9 button.
•
Moves to the setting of the selected item.
•
The menu will appear on the display.
ꢀ
Press the + or − button to move to the
tab that contains the item you want to
set.
•
You can change the menu display by moving
the settings tab cursor.
Press the + or − button to change the
setting.
EN
ꢄꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu setting method
ꢅ
Press the `OK button to complete the
setting.
•
You will be informed that the settings have
been established via the screen.
•
Pressing the 0 button without pressing
the `OK button will cancel the settings and
return you to the previous screen.
ꢆ
Press the MENU button to close the
menu screen.
4
Note
•
The recorder will stop if you leave it idle for 3
minutes during a menu setup operation, when a
selected item is not applied.
EN
ꢄꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu setting method
Notes
CRec Menu
•
•
When the recording format is set to the MP3
formats, the sampling rate will be encoded and
processed at 44.1 kHz.
When a high recording rate setting is used
the file capacity will increase. Make sure that
the amount of memory remaining is sufficient
before recording.
When the recorder is in movie mode, the [Rec
Mode] setting will not be affected. To set the
recording mode, set the [Image Quality] setting
in [Recording Settings] while in movie mode
(☞ P.68).
Mic Sense A n
Microphone sensitivity is adjustable to meet
recording needs.
[High]:
This is a highly sensitive mode which can record
surrounding noises.
•
[Low]:
This is the standard level of microphone
sensitivity. Select this mode for cases where the
volume of the source sound is high, such as a
band performance.
Rec Level A n
Note
•
When you would like to clearly record a speaker’s
voice, set [Mic Sense] to [Low] and hold
recorder’s built-in stereo microphone close to
the speaker’s mouth (5-10 cm) when recording.
4
You can set the device to automatically or manually
adjust the recording level.
1
Select [Manual] or [Auto].
[Manual]:
Recording is performed by manually
adjusting the recording level.
[Auto]:
Rec Mode A
Recording is performed by automatically
adjusting the recording level. This is useful
for when you will be recording right away.
The recorder supports the Linear PCM recording
format, which allows sound to be recorded with
a quality equivalent to CD or higher, and the MP3
format, which allows files to be saved with a high
compression ratio. This means you can choose to give
priority to either sound quality or recording time.
•
If you select [Manual], proceed to the
operation of step 2.
Select limiter function.
[Limiter ON]:
ꢀ
1
Select the recording format.
[PCM]:
This function will adjust the input level
when sudden high volume is encountered.
This will prevent sound distortion.
[Limiter OFF]:
This is an uncompressed audio format which
is used for music CDs and the like.
[MP3]:
Disables this function.
MPEG is the international standard
established by a working group of the
ISO (International Organization for
Standardization).
Adjust the recording level:
1
Press the 9 or 0 button while
the recorder is recording, shooting or
paused to adjust the recording level.
ꢀ
Select the recording rate.
When [PCM] is selected:
[96 kHz/24 bit] to [44.1 kHz/16 bit]
When [MP3] is selected:
[320 kbps] to [128 kbps]
EN
ꢄꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu setting method
Notes
Self Timer A n
•
•
The recording level will be automatically
The self-timer function allows a certain amount
of time to elapse after you fully press the REC (s)
button and then starts recording or shooting. Set
this function according to the purpose of recording
or shooting.
adjusted when the recording level is set to
[Auto]. Set the recording level to [Manual] to
use the recording level adjustment feature.
When the unit is set to [Auto], the limiter
function will be disabled. When a loud sound
is produced the level meter will swing all the
way over to the right while recording and the
PEAK/LED indicator light will turn on. When
this happens the sound will be recorded in a
distorted manner since the recording level is too
high. If sound distortions do not disappear even
after the recording level has been adjusted,
change the setting for microphone sensitivity
(☞ P.65) and adjust the recording level again.
If too big sound is input, the noise may occur even
if [Rec Level] is set to [Auto] or [Limiter ON].
The level can be adjusted from [01] to [12]. The
higher the number, the higher the level and the
larger the indicator position on the level meter.
[Off]:
Disables this function.
[beep 5sec]:
A beep tone sounds for 5 seconds and the
PEAK/LED indicator light flashes from 3 seconds
before recording or shooting starts.
[beep 12sec]:
A beep tone sounds for 12 seconds and the
PEAK/LED indicator light flashes from 3 seconds
before recording or shooting starts.
[metalic5sec]:
A rhythm count tone sounds for 5 seconds and
the PEAK/LED indicator light flashes from 3
seconds before recording or shooting starts.
[metalic12sec]:
A rhythm count tone sounds for 12 seconds
and the PEAK/LED indicator light flashes from 3
seconds before recording or shooting starts.
•
•
4
Low Cut Filter A n
The recorder has a Low Cut Filter function to
minimize low-frequency sounds and record voices
more clearly. This function can reduce noise from
air conditioners, projectors and other similar
noises.
Notes
•
•
•
To cancel the self-timer after it starts press the
STOP (4) button.
Self-timer shooting is automatically canceled
after one shot.
When the [LED] setting is set to [Off], the LED
does not flash during self-timer operation. After
the time set for the self-timer elapses, recording
or shooting starts automatically (☞ P.73).
When the [Beep] setting is set to [Off], beep
does not sound during self-timer operation.
After the time set for the self-timer elapses,
recording or shooting starts automatically (☞
P.73).
[Off]:
Disables this function.
[100Hz]:
This setting will reduce the noise generated
from air conditioners or projectors. It is effective
for indoor recording.
•
[300Hz]:
Use this setting when sufficient effects cannot
be obtained with the [100 Hz] setting.
Note
•
When the [Input Jack] setting is set to [Line],
the Low Cut Filter function is disabled (☞ P.67).
EN
ꢄꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu setting method
Rec Monitor A n
Input Jack A n
Select whether or not to output audio while
recording from the earphone jack.
[On]:
Enables the recording monitor function. Sound
will be output from the EAR jack.
[Off]:
Disables this function. Sound will not be output
from the EAR jack.
Select whether to use the recorder’s MIC jack to
connect an external microphone or as a LINE IN
jack to connect an external device.
[Microphone]:
Set this when connecting an external
microphone.
[Line]:
Set this when connecting an external device to
use the jack as a LINE IN.
Note
Note
•
When the external speaker is connected while
recording, there is a risk that audio feedback
will occur. It is recommended that you use
earphones for the recording monitor, or turn
[Rec Monitor] to [Off] while recording.
•
When the [Input Jack] setting is set to [Line],
the Low Cut Filter function is disabled (☞ P.66).
4
V-Sync. Rec A
See “Voice sync recording [V-Sync. Rec] A”
(☞ P.76).
Plug-inPower A n
External microphones which are supported by
plug in power can also be used. Whether or not
to supply power to external microphones can be
configured.
[On]:
When the plug-in power function is activated,
power will be supplied to the connected
external microphone. Select this when external
microphones supported by plug-in power are
connected (☞ P.40).
[Off]:
Disables this function. Select this when external
microphones not supported by plug-in power
are connected.
Notes
•
•
When the [Input Jack] setting is set to [Line],
the plug in power function is disabled.
Turn the plug-in power function to [Off] when
an external microphone not supported by plug-
in power is connected, as there is the risk that
noise may be generated while recording.
Phantom power cannot be supplied, even when
the plug in power function is set to [On].
•
EN
ꢄꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu setting method
Main LCD Display n
JRecording Settings
Set whether to turn on the main LCD during
shooting depending on the location and
environment of use. The battery life will increase if
the LCD is off during shooting.
[On]:
Image Quality n
You can set the image quality (resolution) of the
movie you will shoot. Select an image mode
according to the purpose of use. Concurrently with
the image quality, you can also set the movie’s
sound quality.
The main LCD is turned on also during shooting.
[Off]:
The main LCD is turned off during shooting.
1
ꢀ
Select the image quality.
[1920 ×1080 30fps] [1280 × 720 30fps]
Note
[640 × 480 30fps]:
•
When shooting with the LCD off, use a tripod or
shoot with the recorder placed on a stable and
flat surface.
•
Setting the resolution to higher values
(number of pixels) allows more detailed
shootings, but will result in larger files. Set
the image quality according to the purpose
of use.
4
Reverse Angle Recording n
Select the recording rate.
When [1920 x 1080 30fps] is selected:
[PCM 96 kHz/24 bit] to [PCM 44.1 kHz/16 bit]
When [1280 x 720 30fps] is selected:
[PCM 96 kHz/24 bit] to [PCM 44.1 kHz/16 bit]
When [640 x 480 30fps] is selected:
[MP3 320 kbps] to [MP3 128 kbps]
Set upside down recording to shoot using the
recorder upside down (☞ P.46).
[On]:
Enables the upside down recording function.
[Off]:
Disables this function.
Notes
Note
•
When a high recording rate setting is used
the file capacity will increase. Make sure that
the amount of memory remaining is sufficient
before recording.
It is recommended to set the resolution to
[640×480 30fps] and MP3 format when
uploading to video sites.
•
The setting returns automatically to [Off] after
the shooting finishes. To continue shooting
using the upside down recording function,
configure the setting again.
•
•
During movie mode (n), the sound is recorded
at the recording rate set in [Image Quality]. The
setting configured in [Rec Mode] under [Rec
Menu] will not be reversed (☞ P.65).
EN
ꢄꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu setting method
Magic Movie n
Metering n
4 types of filters allow you to easily apply various
effects when shooting movies, enabling you to
capture dynamic scenes and special moments in
your own distinctive way.
The recorder is equipped with multi-zone metering
and spot metering. Set the proper metering
according to the scene to be shot.
[Multi-zone Metering]:
Shoots to obtain a balanced brightness over
the entire screen (Meters the brightness at the
center and surrounding areas of the screen
separately).
[On]:
Enables the magic movie function. You can
select the magic movie type.
•
•
Select the desired magic movie type from
[Rock], [Pop], [Pinhole], and [Sketch].
If you select [Rock], effects from [1] to [3]
can be applied.
[Spot Metering]:
Shoots the subject at the center during
backlighting (Meters the brightness at the
center of the screen).
[Off]:
Disables this function.
Note
Notes
•
When set to [Multi-zone Metering], the center
may appear dark when shooting against strong
backlighting.
4
•
In case the magic movie is set to [On], only the
movie file with special effects will be recorded.
The original version of the movie will not be
recorded.
•
•
Special effects cannot be applied or removed
White Balance n
afterwords.
If you want to shoot a movie normally without
applying special effects, verify that the [Magic
Movie] setting is set to [Off] before shooting.
For more natural coloring, choose a white balance
option suited to the scene.
[{] Auto:
The recorder automatically adjusts the white
balance according to the shooting scene.
[;] Sunny:
Image Stabilizer n
For shooting outdoors under a clear sky.
[<] Cloudy:
You can reduce the amount of recorder shake that
can occur when shooting in low light situations or
shooting with high magnification.
[On]:
The image stabilizer is activated.
[Off]:
For shooting outdoors under a cloudy sky.
[:] Fluorescent:
For shooting under daylight fluorescent lighting
(household lighting, etc.).
[=] Incandescent:
The image stabilizer is deactivated. This is
recommended for shooting when the recorder
is fixed in place on a tripod or other stable
surface.
For shooting under incandescent lighting
(office, etc.).
[|] Quick Operation:
You can set the optimum white balance for the
shooting conditions by pointing the recorder at
a white object like a sheet of white paper.
Note
•
Images may not be stabilized if recorder shake is
too severe.
EN
ꢄꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu setting method
When [Quick Operation] is selected:
1Point the lens at a white sheet of paper.
High ISO Mode n
Set the shooting sensitivity.
[Normal]:
•
Place the sheet of paper so that it fills the
screen, and avoid creating shadows.
The recorder automatically adjusts the
sensitivity according to the shooting scene.
[High ISO]:
2Press the `OK button.
The white balance is set.
•
The recorder uses a higher sensitivity compared
to [Normal] to minimize blur caused by a
moving subject or by recorder shake.
Note
•
The registered white balance is stored into the
recorder. It will not be deleted even if you turn
the power off.
Note
•
If you set the sensitivity to [High ISO], the
amount of image noise may increase depending
on the shooting environment.
Exposure Comp. n
The standard brightness (appropriate exposure) set
by the recorder based on the shooting mode can
be adjusted brighter or darker to obtain a desired
shot.
4
Press the + or – button to adjust the
exposure.
•
You can adjust the exposure from [-2.0] to
[+2.0], incrementing it by 1/3 steps.
Note
•
The value you set remains stored into the
recorder even if you turn the power off. Check
the setting before you start shooting.
EN
ꢅ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu setting method
Equalizer A n
#Play Menu
If you change the equalizer setting, you can enjoy
the music with your favorite sound quality.
Play Mode A n
1
Select the desired equalizer
characteristics.
You can select the playback mode that fits your
preference.
[Off]:
Select the desired playback mode:
Disables the equalizer function.
[Rock] [Pop] [Jazz]:
Enables the equalizer function.
[User]:
Select [User] to save your own custom
equalizer settings. If [User] is selected,
proceed to Step 2.
[File]:
Stop after playing back the current file.
[File Repeat]:
Play the current file repeatedly.
[Folder]:
Play files continuously in the current folder
until the last file and stop.
[Folder Repeat]:
ꢀ
ꢁ
Select the frequency band.
Play all files in the current folder
continuously.
[All]:
Play all files in the selected memory
continuously and stop.
[All Repeat]:
Play all files in the selected memory
continuously and repeatedly.
[60 Hz] [250 Hz] [1 kHz] [4 kHz] [12 kHz]:
Select the frequency bandwidth setting.
4
Select the equalizer level.
•
•
•
You can select the equalizer level from [–6]
to [+6] in 1dB increments.
The higher the decibel value, the louder the
sound.
To change the settings again, press the 9
or 0 button and repeat the procedure
from step 2.
Notes
•
•
In [File] mode, when the recorder comes to the
end of the last file in the folder, [End] flashes for
two seconds on the sub LCD and the recorder
stops at the start of the last file.
In [Folder] mode, when the recorder comes
to the end of the last file in the folder, [End]
flashes for two seconds on the sub LCD and the
recorder stops at the start of the first file in the
folder.
Visualizer A
5 types of video (visualizer) can be displayed on the
screen along with the playback of files. This allows
you to enjoy sound and video together.
[Off]:
Disables this function.
•
In [All] mode, after playing the last file in the
folder, the recorder will start playing from the
first file in the next folder. When it comes to
the end of the last file in the recorder, [End]
flashes for two seconds on the sub LCD and the
recorder stops at the start of the first file in the
recorder.
[Equalizer] [Run!] [Pink Line]
[Mysterious Tree] [Rainy Blue]:
Select the desired visualizer type.
Note
•
The visualizer is enabled during file playback in
voice mode (A).
EN
ꢅ1
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu setting method
Property A n
!File Menu
File and folder information can be confirmed from
the menu screen.
File Lock A n
When a file is selected:
Locking a file keeps important data from being
accidentally erased. Locked files are not erased
when you select to erase all files from a folder
(☞ P.59).
[Name] [Date] [Size] [File Length] and [File
Format] will appear on the display.
When a folder is selected:
[Name] and [Date] will appear on the display.
[On]:
Locks the file and prevents it from being erased.
[Off]:
Note
Unlocks the file and allows it to be erased.
•
Select a file for which you would like to confirm
information in advance before operating the menu.
Replace A n
See “Rearranging files [Replace] A n” (☞ P.78).
4
File Move/Copy A n
See “Moving/Copying files [File Move/Copy] A
n” (☞ P.79).
File Divide A n
See “Dividing files [File Divide] A n” (☞ P.81).
EN
ꢅꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu setting method
Beep A n
DLCD/Sound Menu
The recorder beeps to alert you to button
operations or warn you of errors. System sounds
may be turned off.
Main LCD A n
Main LCD contrast can be adjusted in 5 levels.
You can adjust the main LCD contrast level from
[1] to [5].
[On]:
•
Enables the Beep function.
[Off]:
Disables this function.
Note
Sub LCD A n
•
When the [Beep] setting is set to [Off], the beep
of the [Self Timer] function does not sound.
You can set the backlighting time interval and
adjust the contrast of the sub LCD.
1
ꢀ
Select [Contrast] or[Backlight].
Select the setting.
When [Contrast] is selected:
You can adjust the sub LCD contrast level
from [01] to [12].
When [Backlight] is selected:
[Off]:
Disables this function.
Language(Lang) A n
4
You can select the display language for this
recorder.
[English] [Français] [Deutsch] [Italiano] [Español]
[Русский]:
The selectable languages differ depending on
the region.
•
[5 seconds] [10 seconds] [30 seconds]
[60 seconds] [Always ON]:
Enables the Backlight function.
LED A n
You can set it so the PEAK/LED indicator light and
recording/shooting indicator light does not turn
on.
[On]: LED light will be set.
[Off]: LED light will be canceled.
Note
•
When the [LED] setting is set to [Off], the LED of
the [Self Timer] function does not light.
EN
ꢅꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu setting method
HDMI A n
EDevice Menu
Set this when connecting the recorder to a TV to
play movie files.
Auto Power Off A n
[480p/576p] [720p] [1080i]:
Forgetting to turn the power off can be prevented.
If the recorder remains in stop mode for over 10
minutes (Initial setting) while the power is turned
on, the power will be turned off.
[5min.] [10min.] [30min.] [1hour]:
Set the length of time before the power will be
turned off.
•
For details on connecting the recorder to a TV,
see ☞ P.56.
Notes
•
When set to [1080i], 1080i format takes priority
for HDMI output. However, if this setting does
not match the input setting of the TV, the signal
format is changed first to [720p] and then to
[480p/576p]. For details on changing the input
setting of the TV, refer to the TV’s instruction
manual.
[Off]:
Disables this function.
If any button is pressed, the elapsed time count
before the power turns off will start over again.
•
•
•
When the recorder is connected to the
computer by the USB cable, do not connect the
HDMI cable to the recorder.
The main LCD will be off when an HDMI cable is
connected to the recorder.
4
Time & Date A n
See “Setting time and date [Time & Date] A n”
(☞ P.25).
Fn setting A n
Reset Settings A n
See “Fn Setting [Fn. setting] A n” (☞ P.83).
This returns the functions back to their initial
settings (factory default).
[Start]:
Returns the settings to their initial values.
[Cancel]:
USB Settings A n
Takes you back to [Device Menu].
See “Changing the USB class [USB Settings] A
n” (☞ P.84).
•
After resetting the settings, the time settings,
file numbers and folder name will be preserved,
will not return to their initial settings.
Menu settings after resetting (initial
settings):
Rec Menu:
[Mic Sense]
[Rec Mode]
[High]
[PCM]
[44.1kHz/16bit]
[Manual]
[Off]
[Rec Level]
[Low Cut Filter]
[Self Timer]
[Off]
[Rec Monitor]
[Plug-inPower]
[Input Jack]
[On]
[On]
[Microphone]
[Off]
EN
[V-Sync. Rec]
ꢅꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu setting method
Recording Settings:
[Image Quality]
Format A n
[640×480 30fps]
[MP3 320kbps]
[On]
See “Formatting the recorder [Format] A n”
(☞ P.86).
[Main LCD Display]
[Reverse Angle
Recording] [Off]
[Magic Movie ]
[Image Stabilizer]
[Metering]
[Off]
[On]
Memory Info. A n
[Multi-zone Metering]
[{] (Auto)
[White Balance]
[Exposure Comp.]
[High ISO Mode]
The recordable capacity remaining and overall
capacity of the recording media can be seen from
the menu.
The recorder will use some capacity of the
memory to keep the management file. For SD
card, the remaining capacity will be shown
less than the total capacity of the card due to
characteristic of the SD card, but this is not a
malfunction.
[
0.0EV]
[Normal]
Play Menu:
[Play Mode]
[Equalizer]
[Visualizer]
•
[File]
[Off]
[Off]
LCD/Sound Menu:
[Main LCD]
[Sub LCD]
[Contrast]
[Backlight]
[LED]
[Beep]
[Language(Lang)]
[3]
4
[Level 06]
[10Seconds]
[On]
[On]
[English]
System Info. A n
You can check the recorder’s information on the
menu screen. [Model] (Model Name), [Version]
(System version) and [Serial No.] (Serial Number)
appear on the display.
Device Menu:
[Auto Power Off]
[Fn. setting]
[USB Settings]
[USB Connect]
[USB Class]
[10min.]
[Off]
[PC]
[Storage class]
[1080i]
[HDMI]
EN
ꢅꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu setting method
Adjusting the voice sync level for recording:
Voice sync recording [V-Sync. Rec] A
1
Press the REC (s) button and prepare
Voice sync recording starts when a voice louder
than the voice sync level (detection level) is
detected. When the voice becomes low, recording
will automatically stop. When setting voice
sync recording, if the input falls below the voice
sync level (detection level) or the set detection
time elapses, the recorder will stop the current
operation, create a new file, and switch to standby
mode.
to record.
•
[Check rec level?] will flash on the sub LCD.
ꢀ
Press the 9 or 0 button to adjust
the recording level.
•
The level can be adjusted from [01] to [12].
The higher the number, the higher the level
and the larger the indicator position on the
level meter.
4
+− button
9 0 button
`OK button
ꢁ
Press the `OK button.
•
The screen switches to the voice sync level
setting.
1
Select [V-Sync. Rec] from the menu on
•
Each time the `OK button is pressed, the
setting is switched between the recording
level and voice sync level.
the [Rec Menu].
•
For details on how to enter the menu
settings, see “Menu setting method”
(☞ P.63).
ꢂ
Press the 9 or 0 button to adjust
the voice sync level.
•
The voice sync level can be set to any of 15
different values.
The higher the value, the more sensitive the
recorder will be to sounds. At the highest
value, even the faintest sound will activate
recording.
•
ꢀ
Sets the detection time.
[Off]:
Disables this function.
[1 second] [2 seconds] [3 seconds]
[4 seconds] [5 seconds] [10 seconds]:
Sets the detection time.
•
Press the `OK button to return to the
recording level setting.
If the input is equal to or below the specified
level (recording level) during the set
detection time, the recorder will stop the
current operation, create a new file, and
switch to standby mode.
EN
a
ꢅꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu setting method
aVoice sync level (moves to the right/left
according to the set level)
ꢃ
Press the REC (s) button again.
•
•
The recorder will go into standby. [Standby]
will flash on the sub LCD and the recording/
shooting indicator light will flash.
When the input is at or above the voice sync
level, recording will start automatically.
ꢄ
Voice sync recording stops
automatically.
•
If sound at a volume below the voice sync
level continues for the specified time, voice
sync recording will end automatically, and
the recorder will return to the standby mode
of Step 5. Every time the recorder enters
standby mode, the file will be closed and
recording will continue in a different file.
To stop the recorder during voice sync
recording, press the STOP (4) button.
4
•
EN
ꢅꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu setting method
ꢃ
Press the + or − button to select the
location to move it to.
Rearranging files [Replace] A n
You can move a file in a folder to change the order
of playback. First select the folder (file) for which
you want to change the playback order.
ꢄ
ꢅ
Press the `OK button to complete the
+ − button
`OK button
setting.
•
If there are more files to move, repeat Steps
3 through 6.
Pressing the 0 button without pressing
the `OK button will cancel the settings and
return you to the previous screen.
MENU button
•
1
ꢀ
Select the folder for which you
would like to rearrange the file order
(☞ P.32).
4
Press the MENU button to close the
menu screen.
Select [Replace] from the menu on the
[File Menu].
•
For details on how to enter the menu
settings, see “Menu setting method”
(☞ P.63).
ꢁ
Press the + or − button to select the file
you want to move.
ꢂ
Press the `OK button.
•
The cursor will flash to confirm that the file
can be moved.
EN
ꢅꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu setting method
ꢂ
ꢃ
Press the `OK button.
Moving/Copying files
Press the + or − button to select the
folder you want to move or copy the
file to.
[File Move/Copy] A n
Files saved in the SD card can be moved or copied
within the memory. Files can also be moved or
copied between memory.
+ − button
`OK button
ꢄ
Press the `OK button.
MENU button
4
1
ꢀ
In the file list display, press the + or −
button to select the file you want to
move or copy (☞ P.32).
Select [File Move/Copy] from the menu
on the [File Menu].
•
For details on how to enter the menu
settings, see “Menu setting method”
(☞ P.63).
ꢁ
Press the + or − button to select the
position to move or copy the file to.
•
File move or file copy will start if [Moving!]
or [Copying!] appears on the sub LCD.
During the process, the progress status
will be shown in percentage. The process is
completed when [File move completed] or
[File copy completed] is displayed.
[Move]:
Move a file in the SD card to another folder in
the SD card.
[Copy]:
Copy a file in the SD card to another folder
within the SD card.
EN
ꢅꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu setting method
Notes
•
•
•
•
•
The recorder cannot copy when the memory
capacity is not sufficient.
The recorder cannot move or copy when the
number of files exceeds 999.
Do not remove the battery during moving or
copying. This may damage the data.
A file cannot be moved or copied to the same
folder.
When the operation is canceled during moving
or copying, only the file that is being moved
or copied is effective, all other files will not be
moved or copied.
•
•
•
Files which are locked will remain so even after
they are moved or copied (☞ P.72).
Files cannot be moved or copied directly under
the [Root] folder.
In movie mode (n), files can be moved or
copied to the [Movie ***] and [Edit] folders
directly under the [DCIM] folder.
In voice mode (A), files can be moved or copied
to the [Folder A] through [Folder E] and [Music]
folders.
4
•
EN
ꢆ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu setting method
ꢁ
ꢂ
Press the + button to select [Start].
Dividing files [File Divide] A n
Files with large capacities and long recording times
can be divided so that they are easier to manage
and edit.
Press the `OK button.
•
[Dividing!] will appear and file dividing will
start.
File dividing is completed when [File divide
completed] appears.
+ − button
`OK button
•
MENU button
4
It is recommended to make a copy of
the original file before dividing a file
(☞ P.79, P.92).
1
ꢀ
Stop playback at the divide position.
•
While the recorder is during playback mode,
press and hold the 9 or 0 button to
fast-forward or rewind.
It is useful to set index marks on marking in
advance at the divide position (☞ P.52).
•
Select [File Divide] from the menu on
the [File Menu].
•
For details on how to enter the menu
settings, see “Menu setting method”
(☞ P.63).
ꢃ
Press the MENU button to complete
the setting.
EN
ꢆ1
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu setting method
Notes
•
The recorder cannot divide files when the
number of files in the folder exceeds 999.
Locked files cannot be divided (☞ P.72).
When you divide a movie file, the dividing
position may be offset by up to approximately 1
second.
•
•
•
•
After splitting the voice file, the front part of the
file will be renamed as [File name_1.MP3] and
the latter part of the file will be named as [File
name_2.MP3].
After a file is divided, a new file number is
assigned to each of the movie files, and then
the files are saved to the [Edit] folder under
the [DCIM] folder. The original file is deleted
automatically.
•
•
If a file has an extremely short recording time, it
may not be divided even if it is a PCM file.
Do not remove the battery and SD card while
dividing a file. This may damage the data.
4
EN
ꢆꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu setting method
[Light]:
Fn Setting [Fn. setting] A n
When functions are registered in the Fn button,
each time the Fn button is pressed, you can set or
change the menu of registered function.
[On] [Off]: By pressing the Fn button, you can
turn the backlight of the sub LCD on or off.
[Image Quality]:
The image quality (resolution) and recording
rate can be configured.
[Magic Movie]:
Setting
[On]:[Rock1] [Rock2] [Rock3][Pop] [Pinhole]
[Sketch]
[Off]: No functions will be allocated to the button.
[INDEX]: (☞ P.52).
[Off]
[White Balance]:
[Auto] [Sunny] [Cloudy] [Fluorescent]
[Incandescent] [Quick Operation]
[Exposure Comp.]:
You can adjust the exposure from [-2.0] to [+2.0]
in increments of 1/3.
[Rec Mode]: (☞ P.65).
[Rec Level]: (☞ P.65).
[Play Mode]: (☞ P.71).
[Equalizer]: (☞ P.71).
[Property]: (☞ P.72).
[Light]: (☞ P.73).
[Image Quality]: (☞ P.68).
[Reverse Angle Recording]: (☞ P.68).
[Magic Movie ]: (☞ P.69).
[White Balance]: (☞ P.69).
[Exposure Comp.]: (☞ P.70).
4
Each time the Fn button is pressed, the setting of
registered function is changed:
[Reverse Angle Recording]:
[On] [Off]: Select [Reverse Angle Recording]
on or off by pressing the Fn button.
To call up a registered function:
If the Fn button is pressed during operation, the
registered function is performed:
[INDEX]:
When the Fn button is pressed, menu setting
display of registered function will appear:
[Rec Mode]:
[PCM] [MP3]: The recording rate can be
configured for each file format.
[Rec Level]:
[Manual] [Auto]: You can configure whether to
adjust the recording level automatically or to
adjust it manually. When the [Rec Level] is set to
[Manual] you can configure the limiter function.
[Play Mode]:
With each press of the Fn button, an index mark
is added.
Notes
•
•
When the registered function is [Rec Mode]
or [Property], these will not function if the
Fn button is pressed during operation. While
the recorder is during stop mode, press the Fn
button.
The following functions can be used also when
the recorder is operating.
[File] [File Repeat] [Folder]
[Folder Repeat] [All][All Repeat]
[Equalizer]:
[Equalizer], [Light], [INDEX]
[Off] [Rock] [Pop] [Jazz] [User] Select [User]
to save your own custom
equalizer settings.
[Property]:
File and folder information can be confirmed
from the menu screen.
EN
ꢆꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu setting method
When [USB Connect] is selected:
Changing the USB class
[USB Settings] A n
ꢂ
Press the + or − button to change the
setting.
Besides setting to [PC] (Connect to PC to transfer
files) or [AC Adapter] (Connect to AC adapter to
recharge the battery), you can switch the USB class
according to your usage. The [PC Camera] setting
is also included for when you want to use the
recorder as a PC camera (☞ P.95).
[PC]:
Setting for when the recorder is connected
to the PC and used as a storage device or
composite device. Connected as storage or
composite.
+ − button
`OK button
4
[AC Adapter]:
MENU button
Setting for when the recorder is connected
to the PC for charging or to the AC Adapter
(F-3AC).
[Optional]:
Setting to confirm the connection method
each time a USB connection is made.
1
ꢀ
Select [USB Settings] from the menu
on the [Device Menu].
•
For details on how to enter the menu
settings, see “Menu setting method”
(☞ P.63).
ꢃ
Press the ` OK button to complete the
setting.
•
If you select [USB Connect], proceed to the
operation of Step 8.
Press the + or − button to select [USB
Connect] or [USB Class].
[USB Connect]: Setting for connecting to the
PC.
[USB Class]: Setting for USB class.
ꢁ
Press the ` OK button.
•
If you select [USB Class], proceed to the
operation of Step 6.
EN
ꢆꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu setting method
When [USB Class] is selected:
ꢄ
Press the + or − button to change the
setting.
[Storage class]:
Recognized as an external memory device
from the PC.
[PC Camera]:
Recognized as a PC camera from the PC.
Press the ` OK button to complete the
setting.
4
ꢅ
ꢆ
Press the MENU button to close the
menu screen.
Notes
•
When you first connect the recorder to your PC
as an external storage device, the driver for the
recorder will be automatically installed in your
PC.
•
•
•
The PC cannot recognize when the recorder is
connected to the PC when setting for the [USB
Connect] is set to [AC Adapter].
When the recorder is not recognized by the PC
as an external storage device, change the [USB
Class] setting to [Storage class].
When [PC Camera] is set, the recorder is not
recognized as an external removable device by
the PC.
EN
ꢆꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu setting method
Formatting the recorder [Format] A n
+ − button
`OK button
If you format the recorder, all files will
be removed and all function settings
will return to defaults except date and
time settings. Transfer any important
files to a computer before formatting
the recorder.
ꢂ
ꢃ
Press the + button again to select
[Start].
4
1
ꢀ
Select [Format] from the menu on the
[Device Menu].
For details on how to enter the menu
settings, see “Menu setting method”
(☞ P.63).
•
Press the `OK button.
•
Formatting begins and [Format !] flashes on
the main LCD.
Press the + button to select [Start].
ꢁ
Press the `OK button.
After [Data will be cleared] message is on
for two seconds, [Start] and [Cancel] will
turn on.
•
EN
•
[Format Done] appears when formatting
ends.
ꢆꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu setting method
Notes
•
•
Never format the recorder from a PC.
When the recorder is formatted, all the saved
data, including locked files and read-only files,
are erased.
•
•
After formatting, recorded voice file names may
start from [0001].
For returning the settings for the functions to
their initial settings, use [Reset Settings] (☞
P.74).
•
It may take over 10 seconds to complete
processing. Never perform operations such as
the following while processing, as they may
damage the data.
1Disconnect the AC Adapter while processing.
2Removing the battery while processing.
3Remove the SD card while processing.
In addition, carefully check the remaining
battery level in order to ensure that the battery
will not run out while processing.
Formatting on the recorder will be Quick
Format. If you format the SD card, information
of file management is refreshed and the data
inside the SD card is not deleted completely.
When handing over and disposing the SD
card, be careful about the data leakage from
the SD card. We recommend the SD card to be
destroyed when you dispose the SD card.
4
•
EN
ꢆꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the recorder on your PC
By being connected to a PC, the recorder enables you to do the following:
•
•
•
Voice files recorded on the recorder can be played and managed on the PC using the “Olympus Sonority”
(Optional).
In addition to using the recorder as a linear PCM recorder, movie recorder, and music player, you can also
use it as a PC camera (☞ P.95).
You can use Quick Time to play the .MOV, .WAV, and .MP3 files transferred to your PC (☞ P.93).
Operating environment
Windows
Operating System:
Drive:
CD-ROM, CD-R, CD-RW, DVD-ROM drive
Browser:
Microsoft Internet Explorer 6.0 or later
Display:
1024 x 768 pixels or more, 65,536 colors or more
(16,770,000 colors or more is recommended)
USB port:
One or more free ports
Microsoft® Windows® XP Service Pack 2, 3
Microsoft® Windows® XP Professional x64
Edition Service Pack 2
Microsoft® Windows Vista® Service Pack 1, 2
(32bit/64bit)
Microsoft® Windows® 7 (32bit/64bit)
CPU:
32 bits (x86) of 1GHz or above or 64 bits (x64)
processor
RAM:
512 MB or more
Hard drive space:
300 MB or more
5
Others:
•
•
Audio device
Environment where the Internet can be
utilized (Quick Time version 7.2 or more is
recommended).
Notes
•
The support service will not cover if your PC has been updated from Windows 95/98/Me/2000 to Windows
XP/Vista/7.
•
•
•
Any failure on a self-modified PC will not be covered under the operational warranty.
The recorder may not operate properly depending on your PC environment.
“Olympus Sonority” (optional) does not support movie files.
EN
ꢆꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating environment
Macintosh
Operating System:
Mac OS X 10.4.11 - 10.6
CPU:
Display:
1024 x 768 pixels or more, 32,000 colors or more
(16,770,000 colors or more is recommended)
USB port:
One or more free ports
PowerPC® G5 or Intel Multicore Processor 1.5
GHz or above
RAM:
Others:
512 MB or more
•
•
Audio device
Hard drive space:
300 MB or more
Drive:
Environment where the Internet can be
utilized (Quick Time version 7.2 or more is
recommended).
CD-ROM, CD-R, CD-RW, DVD-ROM drive
Browser:
Macintosh Safari 2.0 or later
Precautions on using the recorder connected to a PC
5
•
When you are downloading a file from the recorder or uploading a file to the recorder, do not remove
the USB cable even if the screen is indicating you can. Data is still being transferred while the PEAK/LED
indicator light is blinking. When removing the USB cable, be sure to follow the description in ☞ P.91. If the
USB cable is removed before the drive is stopped, data may not be successfully transferred.
On a PC, do not format the drive of the recorder. Initialization is not successfully achieved on a PC. For
initialization, follow the instructions in the [Format] display of the recorder (☞ P.86).
Folder (directory) names displayed by file management tools such as Explorer in Microsoft Windows and
Finder in Macintosh are different from the folder names that can be set with the recorder or the “Olympus
Sonority”.
•
•
•
•
•
If folders or files stored on the recorder are moved or renamed by using a file management tool in Windows
or Macintosh, the order of files may be changed or files may become unrecognizable.
Data can be written or uploaded to the recorder even though the attribute of the recorder drive is shown as
Read-only by the operating system of the PC.
As the noise may cause adverse effects on electronics devices nearby the recorder, unplug the external
microphone and earphone when you connect the recorder to a PC.
EN
ꢆꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to your PC
Windows:
1
ꢀ
Boot the PC.
Connect the USB cable to the USB port
of the PC.
When you connect the recorder to Windows
and open [My Computer], it will be recognized
by the drive name of the product name.
Inserting an SD card will allow you to use it as
[Removable Disk].
Macintosh:
When you connect the recorder to Mac OS, it
will be recognized by the drive name of the
product name on the desktop. If an SD card is
inserted, [LS20M] will be displayed.
Notes
•
•
•
Before connecting the USB cable, exit HOLD
mode.
Refer to the user’s manual for your PC regarding
the USB port on your PC.
Be sure to push the cable connector all the way
in. Otherwise, the recorder may not operate
properly.
ꢁ
While the recorder is during stop mode
or turned off, connect the USB cable to
the connecting terminal on the bottom
of the recorder.
5
•
•
When connecting the recorder through an USB
hub the operation may become unstable. In
such cases, refrain from using a USB hub.
Be sure to use the included dedicated USB cable.
If any other company’s cable is used, it may lead
to malfunction of the recorder. Also, never use
this dedicated cable with any other company’s
products.
•
•
[Remote (Storage)] is displayed on the
recorder if the USB cable is connected.
When the recorder is using the USB
connection setting, it will not be connected
to the PC when [AC Adapter] is selected.
Select [PC] in the USB connection setting
(☞ P.84).
EN
ꢇ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to your PC
Disconnecting from your PC
Windows
Macintosh
1
Click [
] on the task bar located at
1
Drag and drop the drive icon for this
recorder displayed on the desktop to
the Recycle Bin icon.
the lower-right corner of the screen.
Click [Safely remove USB Mass
Storage Device].
•
•
The drive letter will differ depending on the
PC being used.
When the window indicating that it is safe
to remove hardware window appears, close
the window.
ꢀ
Confirm that the recorder PEAK/
LED indicator light is gone before
disconnecting the USB cable.
5
ꢀ
Confirm that the recorder PEAK/
LED indicator light is gone before
disconnecting the USB cable.
Note
•
NEVER disconnect the USB cable while the PEAK/LED indicator light is flashing. If you do, the data will be
destroyed.
EN
ꢇ1
Download from Www.Somanuals.com. All Manuals Search And Download.
Transfer the voice files to your PC
The 5 voice folders of this recorder are named as [Folder A], [Folder B], [Folder C], [Folder D] and [Folder E],
and the recorded voice files are saved in these folders. Furthermore, the movie shooting folder is named as
[DCIM]. Copy a folder to any folder on your PC.
4 Drive names and folder names when a
Windows
PC is connected:
1
Connect the recorder to your PC
(☞ P.90).
SD card
ꢀ
Open the Explorer window.
Drive name
Folder name
•
When you connect the recorder to Windows
and open [My Computer], it will be
Recorder
Folder A
Folder B
Folder C
Folder D
Folder E
Removable
Disk
recognized by the drive name of the product
name. Inserting an SD card will allow you to
use it as [Removable Disk].
Open the product name folder.
Copy the data.
Windows
Music
DCIM
LS20M
ꢁ
ꢂ
ꢃ
Macintosh
Disconnect the recorder from the PC
(☞ P.91).
5
Notes
Macintosh
•
While transmitting data, [Busy] is displayed,
and the PEAK/LED indicator light flashes. NEVER
disconnect the USB cable while the PEAK/LED
indicator light is flashing. If you do, the data will
be destroyed.
In a Windows standard environment, 24-bit
wav-format files cannot be played. Use “Quick
Time” or “Olympus Sonority” (Optional) for
playback of such files.
1
Connect the recorder to your PC
(☞ P.90).
•
When you connect the recorder to
Mac OS, it will be recognized by the drive
name of the product name on the desktop.
If an SD card is inserted, [LS20M] will be
displayed.
•
•
“Olympus Sonority” (Optional) allows you to
perform operations such as editing voice files,
but it does not support movie files.
ꢀ
Double-click the product name icon on
the desktop.
ꢁ
ꢂ
Copy the data.
Disconnect the recorder from the PC
(☞ P.91).
EN
ꢇꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Quick Time
You can transfer the voice files you record and movie files you shoot with the recorder to a PC, and then use
Quick Time to play them.
Play the voice file
1
ꢀ
Connect the recorder to your PC
(☞ P.90).
Open the “Quick Time”.
•
The control screen of Quick Time Player is
visualized.
ꢁ
ꢂ
Select [Open File] from the [File] menu.
•
The [Open A File] dialog box appears.
ꢁ
At the dialog screen, set the [File
location], [File type], and [File name]
for the file you want to play.
•
When selecting a voice file recorded with
the recorder, set [File type] to [Audio Files].
Select a file, and then click [Open].
•
5
ꢃ
Play the voice file.
•
Click the
button in the controls of Quick
Time Player to start playback.
ꢂ
ꢃ
EN
ꢇꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Quick Time
Play the movie file
1
Connect the recorder to your PC
(☞ P.90).
ꢀ
ꢁ
ꢂ
Open the “Quick Time”.
•
The control screen of Quick Time Player
appears.
Select [Open File] from the [File]
ꢁ
menu.
•
The [Open A File] dialog box appears.
At the dialog screen, set the [File
location], [File type], and [File name]
for the file you want to play.
•
When selecting a movie file shot with the
recorder, set [File type] into [Movies].
Select a file, and then click [Open].
•
ꢂ
ꢃ
Play the movie file.
•
Click the
button in the controls of Quick
5
Time Player to start playback.
EN
ꢃ
ꢇꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Using as PC camera
On a PC running Windows XP, Windows Vista,
or Windows 7, you can use the recorder as a PC
camera.
To Use the Recorder as a PC Camera
1
ꢀ
In the recorder's [USB Settings], set
[USB Class] into [PC Camera] (☞ P.84).
Connect the recorder to your PC
(☞ P.90).
•
The live image is displayed on the main LCD
of the recorder during PC camera operation.
Use the + or – button of the recorder for
zooming during PC camera operation.
•
Operating environment
Windows:
Windows XP Service Pack 3 or later
Windows Vista
5
Windows 7
Supported applications:
Windows Live Messenger
Macintosh:
Mac OS X 10.6 or later
Notes
•
•
It’s possible to shoot and share only movie files.
Voice files cannot be shared.
When you use the recorder as a PC camera, the
camera can shoot 30 frames per second but
the actual number of frames may be inferior
depending on the connection and/or the PC
processing speed.
EN
ꢇꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Other information
Alarm message list
Message
Meaning
Explanation
Action
Charge the battery (☞ P.19,
P.20). If you run out of battery
soon after the charge, the
battery life has ended. Replace
with new battery.
[Battery Low]
Low battery power.
Battery power is getting low.
[File Protected]
Erase-locked.
Tried to delete a locked file.
Unlock the file (☞ P.72).
Recording has been
attempted with a [Music] or
[DCIM] folder.
Select a folder from among
[Folder A] to [Folder E] and
try recording again (☞ P.32).
[Cannot record in this
folder]
Not an audio-recording
folder.
The file is full of index marks
(maximum of 16 marks).
Erase index marks that are no
[Index Full]
[Folder Full]
Index full.
Folder full.
longer required (☞ P.52).
The folder is full of files
(maximum of 999 files).
Erase unnecessary files
(☞ P.58).
SD card is not recognized
correctly.
Remove the SD card, and put it
[Card Error]
Error in the memory.
Illegally copied file.
again (☞ P.27).
6
[Licence Mismatch]
The music files copied illegally. Erase the file (☞ P.58).
Erase unnecessary files
[Memory Full]
[No File]
Zero remaining memory.
No file.
No remaining memory.
(☞ P.58).
No files were found in the
Select another folder (☞ P.32).
folder.
There was an error while
Reformat the memory
formatting the recorder’s
(☞ P.86).
[Format Error]
Formatting error.
memory.
[Can’t make
The file for management
Connect the recorder to a
the system file.
The management file cannot cannot be created due to
computer and delete any
unnecessary files.
Connect to PC and delete be created.
unnecessary file]
a shortage of capacity for
remaining memory.
Please confirm the file that
can be played on this recorder
(☞ P.48).
[Cannot play this file]
[Please Select The File]
File which cannot be played.
Incompatible format.
File is not selected.
Please select a file then carry
out the operation (☞ P.32).
Unselected File
[Same folder. Can't be
moved(copied).]
File cannot be moved
(copied).
Attempting to move (copy) into
the same folder.
Please select another folder.
EN
ꢇꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Alarm message list
Message
Meaning
Explanation
Action
A file with the same file name
exists in the destination folder Please select another file.
for a move (copy) operation.
[Some files can't be
moved(copied).]
File cannot be moved
(copied).
Attempting to split a file other
than PCM files recorded in this Please select another file.
recorder.
[This file can’t be
divided.]
File which cannot be split.
Recording and shooting are
not possible because the
circuit temperature has risen.
Please wait until the circuit
temperature has become
lower.
[Cooling circuit. Please
Wait]
Recording and shooting are
not possible.
Recording was stopped
because the circuit
Please wait until the circuit
temperature has become
lower.
[Sound rec. stopped]
[Movie rec. stopped]
Recording is not possible.
Shooting is not possible.
temperature has risen.
Shooting was stopped
because the circuit
temperature has risen.
Please wait until the circuit
temperature has become
lower.
6
EN
ꢇꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Symptom
Probable cause
Action
The battery is not loaded properly.
Battery power is getting low.
The power is off.
Check the direction of the battery (☞ P.17).
Nothing appears on the
display
Charge the battery (☞ P.19, P.20).
Turn the power on (☞ P.23).
Battery power is getting low.
The power is off.
Charge the battery (☞ P.19, P.20).
Turn the power on (☞ P.23).
Won’t start
The recorder is in HOLD mode.
Low remaining memory.
Release the recorder from HOLD (☞ P.24).
Erase unnecessary files (☞ P.58).
Unable to record
Unable to shooting
The maximum number of files has been
reached.
Change to any other folder
(☞ P.32).
Low remaining memory.
Erase unnecessary files (☞ P.58).
The maximum number of files has been
reached.
Erase unnecessary files (☞ P.58).
6
Attempting to shoot a movie in voice
mode (A).
Slide the mode switch on the recorder to
movie mode (n) (☞ P.33).
Detach all external microphones and
external devices connected to the MIC jack
(☞ P.40).
No sound picked up by the
built-in microphone
An external microphone or external device
is connected.
An external microphone supported by
plug-in power is connected but [Plug-in
Power] is set to [Off].
Set [Plug-inPower] to [On] when an
external microphone supported by plug-in
power is connected (☞ P.67).
Unable to record through an
external microphone
[Input Jack] is set to [Line].
Set [Input Jack] to [Microphone] (☞ P.67).
Unplug the earphones to use the internal
speaker.
The earphone is connected.
No playback sound heard
Shooting stopped midway
The volume level is set to [00].
The size of a single file exceeded 4 GB.
Adjust the volume level (☞ P.48).
It is not possible to shoot exceeding 4 GB
for a single file.
EN
ꢇꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Symptom
Probable cause
Action
Adjust the recording level and then try
recording once more (☞ P.35, P.65).
The recording level has not been adjusted.
The microphone sensitivity is too low.
Set [Mic Sense] to [High] (☞ P.65).
Recording level too low
This could potentially be because the
output level for the connected external
devices are too low.
Adjust the output level for the
connected devices.
Adjust the recording level and then try
recording once more (☞ P.35, P.65).
The recording level has not been adjusted.
If you cannot record clearly even after
adjusting the recording level, then adjust
the output level for the connected devices
(☞ P.35, P.65).
Recording level too high
This could potentially be because the
recording level and output level for
connected external devices are too high.
Cannot find the recorded
Voice File
Switch to the correct folder
(☞ P.32).
Wrong folder.
The recorder was shaken during recording.
———
The recorder was placed near a cell phone
or fluorescent lamp while recording or
during playback.
Move the recorder.
Noise heard during playback
When a microphone not supported by
the plug-in power function is connected,
turn the [Plug-inPower] setting to [Off]
(☞ P.67).
6
The settings of the connected external
microphone do not correspond to those of
the recorder.
Unable to hear any sound from
the earphone through the
recording monitor
[Rec Monitor] is set to [Off].
Set [Rec Monitor] to [On] (☞ P.67).
The file is locked.
Unlock the file (☞ P.72).
Unable to erase the file
Unlock the file or cancel the read-only
setting of the file on the PC.
The file is read-only.
When the built-in speaker amps and the
like are connected there is a risk that audio
feedback will occur while recording. It is
recommended that you use earphones
for the recording monitor, or turn the [Rec
Monitor] to [Off] while recording (☞ P.67).
Noise is audible through the
recording monitor
Acoustic feedback is occurring.
Perform adjustments, such as further
distancing the earphones from
the microphones, not pointing the
microphones at the earphones, or lowering
the volume of the recording monitor.
EN
ꢇꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Symptom
Probable cause
Action
The maximum number of marks has been
reached.
Erase unnecessary marks (☞ P.52).
The file is locked.
Unlock the file (☞ P.72).
Unable to set index marks
Unlock the file or cancel the read-only
setting of the file on the PC.
The file is read-only.
The file is MP3 format.
An index cannot be set for files in MP3
format.
Contains battery other than the
specified battery.
Please insert the chargeable battery
provided.
Cannot recharge
The back of the recorder could become
hot when shooting movies. This is not a
malfunction.
If the recorder becomes abnormally hot,
please contact the Olympus Customer
Support Center.
The recorder has become hot
6
EN
100
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessories (optional)
Accessories exclusive to the Olympus voice recorder can be purchased directly from Online Shop on our
company’s website. Sales of accessories are different according to the country.
s 2-channel microphone
s Lithium ion battery: LI-42B
This lithium ion rechargeable battery is
manufactured by Olympus. It is best paired with
the LI-41C battery charger.
(omni-directional): ME30W
Two ME30 monaural microphones come in a
set with a miniature tripod and a connection
adapter. These are highly sensitive omni-
directional microphones supported by plug-in
power which are well-suited to recording
musical performances.
s Compact Gun Microphone
(unidirectional): ME31
The directional microphones useful for
recordings such as outdoor recording of wild
birds singing. The metal body provides a
sturdiness to the high rigidity.
s Compact zoom microphone
(unidirectional): ME32
The microphone is integrated with a tripod,
making it suitable for when you wish to record
from a distance, such as from your table at a
meeting or conference.
s Highly sensitive noise-cancellation
monaural microphone (unidirectional):
ME52W
This microphone is used to record sound at a
distance while minimizing surrounding noise.
s Connecting cord: KA333
Connecting cord which has stereo mini-plugs
(ø3.5) with resistance at both ends. Use to
connect from the earphone jack output of the
recorder to the microphone input jack when
recording. Converting plug adapters (PA331/
PA231) which convert to the monaural mini
plug (ø3.5) or monaural mini plug (ø2.5) are also
enclosed.
s Exclusive remote control set: RS30W
When the receiver is plugged into the REMOTE
jack the recorder’s recording, shooting and stop
functions can be operated through the remote
control. The receiving position can be adjusted,
thereby allowing you to operate the recorder
from various different angles.
s High speed HDMI cable: CB-HD1
This cable is for connecting the recorder to an
high-definition TV via an HDMI connection. The
connector type for the recorder side is an HDMI
micro connector (Type D).
6
s Tie clip microphone
(omni-directional): ME15
Small concealing microphone with a tie-clip.
s Telephone pickup: TP7
Earphone type microphone can be plugged
into your ear while phoning. The voice or
conversation over the phone can be clearly
recorded.
EN
101
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
MP3 format
General points
[320 kbps 44.1 kHz]
44.1 kHz
44.1 kHz
44.1 kHz
4 Recording format:
Voice: Linear PCM (Pulse Code Modulation)
MP3 (MPEG-1 Audio Layer3)
Movie: MOV (MPEG-4AVC/H.264)
4 Recording medium:
SD card: 1 GB to 32 GB
4 No. of effective pixels:
2,930,000 pixels (16:9)
2,190,000 pixels (4:3)
4 Image pickup device:
1/4" 5-megapixel CMOS sensor
4 Lens:
Focal length f4.1mm.
16:9 at 49mm
[256 kbps 44.1 kHz]
[128 kbps 44.1 kHz]
4 Maximum headphone output:
â 150 mV (according to EN 50332-2)
4 Speaker:
Built-in ø 16 mm round dynamic speaker
4 MIC jack:
Input Jack [Microphone]:
ø 3.5 mm mini-jack, impedance 2.2 kΩ
Input Jack [Line]:
ø 3.5 mm mini-jack, impedance 39 kΩ
4 EAR jack:
ø 3.5 mm mini-jack, impedance 16 Ω or more
4 Connector
4:3 at 59mm
4 Shooting range:
30 cm to ∞
USB connector/HDMI micro connector (type D)
4 Maximum working output:
270 mW (8 Ω speaker)
4 Movie resolution:
HD1080p 30fps, HD720p 30fps, HD480p 30fps
4 Photometric system:
Digital ESP metering, spot metering system.
4 Shutter speed:
1/30 to 1/4000 sec.
4 Digital Zoom:
Max. 4x
4 Input power requirement:
Battery:
Lithium ion battery (LI-42B)
External power supply:
AC adapter (F-3AC) 5 V
4 External dimensions:
135 mm × 63 mm × 18.1 mm
(without protrusions)
6
4 Monitor:
2.0 color LCD display
4 Weight:
154 g (including battery and SD card)
4 Operating temperature:
0°C - 42°C/ 32°F - 107.6°F
4 Input level:
Mic Sense [High]:
—
59 dBv
Mic Sense [Low]:
—
39 dBv
LINE-IN :
—
6 dBv
Frequency response:
4 Sampling frequency:
Linear PCM format
4 During recording mode
(Microphone jack):
Linear PCM format
[96 kHz/24 bit]
[88.2 kHz/24 bit]
[48 kHz/24 bit]
[44.1 kHz/16 bit]
96 kHz
88.2 kHz
48 kHz
[96 kHz/24 bit]
[88.2 kHz/24 bit]
[48 kHz/24 bit]
[44.1 kHz/16 bit]
20 Hz to 44 kHz
20 Hz to 42 kHz
20 Hz to 23 kHz
20 Hz to 21 kHz
44.1 kHz
EN
10ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
MP3 format
4 During recording mode
(Built-in microphone):
[320 kbps 44.1 kHz]
50 Hz to 20 kHz
50 Hz to 20 kHz
50 Hz to 17 kHz
60 Hz to 20 kHz
[256 kbps 44.1 kHz]
[128 kbps 44.1 kHz]
(However, when recording in the MP3 format,
the upper limit value of the frequency response
depends on each recording mode)
4 During playback mode:
20 Hz to 20 kHz
Guide to battery life
The following values are strictly references.
4 Lithium ion battery:
Built-in stereo microphone
Built-in speakers
Voice mode
Earphone Playback
(During recording mode) (During playback mode)
[96 kHz/24 bit]
3h. 45min.
3h. 45min.
3h. 45min.
3h. 45min.
4h.
4h. 15min.
4h. 15min.
4h. 15min.
4h. 15min.
4h. 30min.
4h. 30min.
4h. 30min.
4h. 25min.
4h. 25min.
4h. 25min.
4h. 25min.
4h. 35min.
4h. 35min.
4h. 35min.
[88.2 kHz/24 bit]
Linear PCM format
[48 kHz/16 bit]
[44.1 kHz/16 bit]
6
[320 kbps 44.1 kHz]
MP3 format
[256 kbps 44.1 kHz]
[128 kbps 44.1 kHz]
4h.
4h.
Built-in stereo microphone
(During shooting mode)
Built-in speakers
(During playback mode)
Movie mode
Earphone Playback
[96 kHz/24 bit]
[88.2 kHz/24 bit]
[48 kHz/16 bit]
1h. 5min.
1h. 5min.
1h. 5min.
1h. 5min.
1h. 10min.
1h. 10min.
1h. 10min.
1h. 10min.
1h. 20min.
1h. 20min.
1h. 20min.
2h.
2h.
2h.
2h.
1920×1080 30fps
(Linear PCM format)
2h.
2h.
[44.1 kHz/16 bit]
[96 kHz/24 bit]
2h.
2h.
2h. 15min.
2h. 15min.
2h. 15min.
2h. 15min.
2h. 25min.
2h. 25min.
2h. 25min.
2h. 15min.
2h. 15min.
2h. 15min.
2h. 15min.
2h. 25min.
2h. 25min.
2h. 25min.
[88.2 kHz/24 bit]
[48 kHz/16 bit]
1280×720 30fps
(Linear PCM format)
[44.1 kHz/16 bit]
[320 kbps 44.1 kHz]
[256 kbps 44.1 kHz]
[128 kbps 44.1 kHz]
640×480 30fps
(MP3 format)
EN
10ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Note
•
Battery life is measured by Olympus. It varies greatly according to the type of batteries used and the
conditions of use.
Guide to recording times
The following values are strictly references.
4 Linear PCM format:
SD card
Recording
mode
1 GB
2 GB
4 GB
8 GB
16 GB
32 GB
[96 kHz/24 bit]
25min.
55min.
1h. 50min.
2h.
3h. 45min.
7h. 25min.
15h. 20min.
[88.2 kHz/24 bit]
[48 kHz/16 bit]
[44.1 kHz/16 bit]
30min.
1h.
2h. 45min.
3h.
4h.
8h. 5min.
22h. 20min.
24h. 15min.
16h. 40min.
45h. 55min.
49h. 55min.
1h. 20min.
1h. 30min.
5h. 30min.
6h.
11h. 20min.
12h. 20min.
4 MP3 format:
SD card
Recording
mode
1 GB
2 GB
4 GB
8 GB
16 GB
32 GB
[320 kbps 44.1 kHz]
[256 kbps 44.1 kHz]
[128 kbps 44.1 kHz]
6h. 45min.
12h. 45min.
26h.
53h. 30min.
105h
216h.
8h. 30min.
17h.
16h.
31h.
32h.
67h.
131h.
263h.
270h.
540h.
6
62h. 30min.
134h.
Notes
•
•
Available recording time may be shorter if many short recordings are made
(The displayed available recording time and recorded time are approximate indications).
Variations in the available recording time will arise as there may be differences in the available memory
depending on the SD card.
Guide to shooting times
The following values are strictly references.
4 1920×1080 30fps:
SD card
Shooting
mode
1 GB
2 GB
4 GB
8 GB
16 GB
32 GB
[96 kHz/24 bit]
7min.
15min.
30min.
1h.
2h.
4h.
[88.2 kHz/24 bit]
[48 kHz/16 bit]
[44.1 kHz/16 bit]
7min.
9min.
9min.
15min.
17min.
17min.
30min.
35min.
35min.
1h.
2h.
4h.
5h.
5h.
1h. 10min.
1h. 10min.
2h. 20min.
2h. 20min.
EN
10ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
4 1280×720 30fps:
SD card
Shooting
mode
1 GB
2 GB
4 GB
8 GB
16 GB
32 GB
[96 kHz/24 bit]
[88.2 kHz/24 bit]
[48 kHz/16 bit]
[44.1 kHz/16 bit]
10min.
20min.
45min.
1h. 30min.
1h. 30min.
2h.
3h.
3h.
4h.
4h.
6h.
10min.
15min.
15min.
20min.
30min.
30min.
45min.
1h.
6h.
8h.
8h.
1h.
2h.
4 640×480 30fps:
SD card
Shooting
mode
1 GB
2 GB
4 GB
8 GB
16 GB
32 GB
[320 kbps 44.1 kHz]
[256 kbps 44.1 kHz]
[128 kbps 44.1 kHz]
30min.
1h.
2h.
4h. 30min.
9h. 30min.
19h.
30min.
35min.
1h.
2h.
4h. 30min.
5h.
9h. 30min.
10h.
19h.
20h.
1h. 15min.
2h. 30min.
Notes
•
•
Available shooting time may be shorter if many short shootings are made
(The displayed available shooting time and recorded time are approximate indications).
Variations in the available shooting time will arise as there may be differences in the available memory
depending on the SD card.
6
Maximum recording time per file
•
•
The maximum size of a single file is limited to approx. 4 GB for MP3 format, and approx. 2 GB for PCM
format.
Regardless of the memory remaining amount, the longest sound recording time per file is restricted to the
following value.
Linear PCM format
MP3 format
[96 kHz 24 bit]
[88.2 kHz 24 bit]
[48 kHz 16 bit]
[44.1 kHz 16 bit]
approx. 55 min.
approx. 1 h.
[320 kbps 44.1 kHz]
approx. 26 h.
[256 kbps 44.1 kHz]
[128 kbps 44.1 kHz]
approx. 32 h.
approx. 2 h. 45 min.
approx. 3 h.
approx. 62 h. 30min.
EN
10ꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Maximum shooting time per file
•
•
The maximum size of a single movie file is limited to approx. 4 GB.
Regardless of the memory remaining amount, the longest sound recording time per file is restricted to the
following value.
1920×1080 30fps:
1280×720 30fps:
[96 kHz 24 bit]
[88.2 kHz 24 bit]
[48 kHz 16 bit]
[44.1 kHz 16 bit]
approx. 30 min.
approx. 30 min.
approx. 35 min.
approx. 35 min.
[96 kHz 24 bit]
approx. 45 min.
approx. 45 min.
approx. 1 h.
[88.2 kHz 24 bit]
[48 kHz 16 bit]
[44.1 kHz 16 bit]
approx. 1 h.
640×480 30fps:
[320 kbps 44.1 kHz]
[256 kbps 44.1 kHz]
[128 kbps 44.1 kHz]
approx. 2 h.
approx. 2 h.
approx. 2 h.
Specifications and design are subject to
change without notice.
6
EN
10ꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical assistance and support
The following are contact information for technical support for Olympus recorders and software only.
s Technical Hotline Number in the U.S. and Canada
1-888-553-4448
s User Support E-mail address in the U.S. and Canada
s Technical Hotline Number in Europe
Toll free number: 00800 67 10 83 00
available for Austria, Belgium, Denmark, Finland, France, Germany, Italy, Luxemburg, Netherlands, Norway,
Portugal, Spain, Sweden, Switzerland, United Kingdom
Charged numbers for the Rest of Europe
+ 49 180 567 1083
+ 49 40 23773 4899
s User Support E-mail address in Europe
For customers in Europe
“CE” mark indicates that this product complies with the European requirements for safety,
health,environment and customer protection.
6
This symbol [crossed-out wheeled bin WEEE Annex IV] indicates separate collection of waste
electrical and electronic equipment in the EU countries. Please do not throw the equipment into
the domestic refuse. Please use the return and collection systems available in your country for the
disposal of this product.
Applicable Product : LS-20M, AC adapter
This symbol [crossed-out wheeled bin Directive 2006/66/EC Annex II] indicates separate collection
of waste batteries in the EU countries. Please do not throw the batteries into the domestic refuse.
Please use the return and collection systems available in your country for the disposal of the waste
batteries.
EN
10ꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
OLYMPUS IMAGING CORP.
Shinjuku Monolith, 3-1 Nishi-Shinjuku 2-chome, Shinjuku-ku,
Tokyo 163-0914, Japan. Tel. +81 (0)3-3340-2111
http://www.olympus.com
OLYMPUS IMAGING AMERICA INC.
3500 Corporate Parkway, P.O. Box 610, Center Valley,
PA 18034-0610, U.S.A. Tel. 1-888-553-4448
http://www.olympusamerica.com
OLYMPUS EUROPA HOLDING GMBH
(Premises/Goods delivery) Wendenstrasse 14-18, 20097 Hamburg, Germany.
Tel. +49 (0)40-237730
(Letters) Postfach 10 49 08. 20034 Hamburg, Germany.
http://www.olympus-europa.com
OLYMPUS IMAGING AUSTRALIA PTY LTD.
82 Waterloo Rd, North Ryde NSW 2113, Australia
TEL: (61) 2-9886-3999
http://www.olympus.com.au
EN-BD3355-01
AP1104
Download from Www.Somanuals.com. All Manuals Search And Download.
|