DIGITAL CAMERA
C-2 Zoom
D-520 ZOOM
C-220 ZOOM
REFERENCE MANUAL
<Click Here>
CAMERA OPERATION
CONNECTING THE CAMERA TO A PC
Download from Www.Somanuals.com. All Manuals Search And Download.
For customers in Europe
“CE” mark indicates that this product complies with the European
requirements for safety, health, environment and customer
protection. “CE” mark cameras are intended for sales in Europe.
For customers in North and South America
For customers in USA
Declaration of Conformity
Model Number
Trade Name
:C-2 Zoom/D-520 ZOOM/C-220 ZOOM
:OLYMPUS
Responsible Party :Olympus America Inc.
Address :2 Corporate Center Drive, Melville, New York
11747-3157 U.S.A.
Telephone Number : 631-844-5000
Tested To Comply With FCC Standards
FOR HOME OR OFFICE USE
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference
that may cause undesired operation.
For customers in Canada
This Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
Trademarks
• IBM is a registered trademark of International Business Machines Corporation.
• Microsoft and Windows are registered trademarks of Microsoft Corporation.
• Macintosh is a trademark of Apple Computer Inc.
• All other company and product names are registered trademarks and/or
trademarks of their respective owners.
• The standards for camera file systems referred to in this manual are the “Design
Rule for Camera File System/DCF” standards stipulated by the Japan Electronics
and Information Technology Industries Association (JEITA).
2
Download from Www.Somanuals.com. All Manuals Search And Download.
INDEX
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Getting started . . . . . . . . . . . . . . . . . . . . . . . . 7
Shooting basics . . . . . . . . . . . . . . . . . . . . . . 29
Advanced shooting . . . . . . . . . . . . . . . . . . . 45
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Camera settings . . . . . . . . . . . . . . . . . . . . . . 81
Print settings . . . . . . . . . . . . . . . . . . . . . . . . 90
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
INDEX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Contents
Getting started
Names of parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Monitor indications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Attaching the strap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
What to do if the CARD SETUP screen is displayed . . . . . . . . . .19
Setting the date and time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Using the menus and tabs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
How to use the menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Shortcut menus. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Mode menus. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Shooting basics
Taking still pictures. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Recording movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Zooming in on a subject (Optical zoom/Digital zoom) . . . . . . . . . . . . .37
Using the optical zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Using the digital zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
Taking close-up pictures (Macro mode). . . . . . . . . . . . . . . . . . . . . . . .40
Using the flash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced shooting
Using the self-timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
Adjusting the color tone (White balance) . . . . . . . . . . . . . . . . . . . . . . .51
Selecting the image quality and size (Record mode). . . . . . . . . . . . . .53
Panorama shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Taking two-in-one pictures. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
Taking a picture of yourself (Self-portrait shooting) . . . . . . . . . . . . . . .60
Playback
Erasing pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69
Editing still pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74
Creating black and white pictures. . . . . . . . . . . . . . . . . . . . . . . . .74
Creating sepia-toned pictures. . . . . . . . . . . . . . . . . . . . . . . . . . . .75
Resizing pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76
Rotating pictures. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Editing movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79
Creating an index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79
Camera settings
81
Turning the beep sound off (Beep sound) . . . . . . . . . . . . . . . . . . . . . .81
Formatting (Card setup). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82
Viewing a picture immediately after shooting (Rec View) . . . . . . . . . .84
Saving the settings (All Reset). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Displaying shooting information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87
Adjusting the monitor brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88
Pixel Mapping. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89
Print settings
How to print pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90
Making a print reservation on the card. . . . . . . . . . . . . . . . . . . . . . . . .92
Troubleshooting
Error codes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98
If an operation does not work . . . . . . . . . . . . . . . . . . . . . . . . . . . .98
If the image quality is poor . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101
Specifications
Index
103
105
Indications used in this manual
l
Important information on factors which may lead to a
malfunction or operational problems. Also warns of
operations that should be absolutely avoided.
Useful information and hints that will help you get the most
out of your camera.
information.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
Names of parts
Lens
Extends automatically when
you open the lens barrier.
Shutter
button
Flash
Pops up when you
open the lens barrier.
Connector cover
USB connector
Zoom
lever
VIDEO
OUT jack
Lens barrier
Turns the camera on and
off in the shooting mode.
Self-timer lamp
DC-IN jack
Orange lamp
Green lamp
Viewfinder
AF target mark
Card cover
Strap eyelet
Monitor
Battery
compartment
cover
Arrow pad
Tripod socket
(OK/Menu) button
(Monitor) button
Turns the camera on and
off in the playback mode.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Monitor indications
Shooting mode
Playback mode
13
5
1
2
14
1
8
10
5
6
7
7
3
4
11
12
8
9
Item
Battery check
Flash
Indication
Ref. Page
p.9
1
2
3
4
5
,
,
,
,
,
p.42
p.49
p.9
Spot metering
Memory gauge
Exposure compensation
-2.0, -1.5, -1.0, -0.5, +0.5, +1.0, +1.5, +2.0
p.47
p.35, p.45,
p.46
6
Self-timer/Drive
,
,
7
8
White balance
Record mode
WB AUTO,
,
,
,
p.51
p.53
SHQ, HQ, SQ1, SQ2
Number of storable still
pictures/Seconds
remaining
9
16/16"
p.35
10 Number of pixels
1600 × 1200, 1024 × 768, 640 × 480
p.53
p.20
11 Date and time
'02.01.12 12:30
File number, Frame
12
100-0016, 16/16"
number/Playing time
13 Print reservation, Number of prints
× 2
p.92
p.72
14 Protect
You can view shooting information details of the recorded picture in the
playback mode. “Displaying shooting information” ( p.87).
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Monitor indications
Memory gauge
The memory gauge lights up when you take a picture. While the gauge is lit,
the camera is storing the picture on the card. The memory gauge indication
changes as shown below depending on the shooting status. When the
memory gauge is full, wait a few moments before taking the next shot.
When taking still pictures
Shoot
Shoot
Shoot
Wait
Before
shooting
(Gauge is
off)
One picture
taken
More than
two taken
(Lit)
No more pictures
can be taken
(Fully Lit)
(Lit)
When recording movies
If you continue shooting
Shoot
Wait
During shooting (Lit)
Before shooting
• Shooting is not possible until the lit area goes off completely.
• Movie recording ends automatically when the memory gauge
is full.
(Gauge is off)
Battery check
If the remaining battery power is low, the battery check indication on the
monitor changes as follows while the camera is turned on.
No indication
Lights up (Green)
Lights up (Red)
Green lamp and Orange
lamp on the right of the
viewfinder blink
Remaining power level:
exhausted
Replace with a new battery.
Remaining power
level: high
Remaining power level: low
Replace with a new battery.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Attaching the strap
1
Thread the short end of the strap
through the strap eyelet.
Strap eyelet
2
3
Thread the long end of the strap
through the loop that has already
gone through the eyelet.
Pull the strap tight, making sure that
it is securely fastened and does not
come loose.
• Be careful with the strap when you carry the camera, as it can easily
catch on stray objects, causing serious damage.
• Attach the strap correctly as shown above so that the camera does
not fall off. If the strap is attached incorrectly and the camera falls off,
Olympus is not responsible for any damages.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the batteries
This camera uses a CR-V3 lithium battery pack or two AA (R6) NiMH
batteries, NiCd batteries, alkaline batteries or lithium batteries.
1
Make sure that:
The lens barrier
is closed.
The monitor is off.
The lamp on the right
of the viewfinder is off.
2
3
Slide the battery compartment
Battery
insertion
direction
mark
cover in the direction of
direction indicated by the
(the
mark on the cover), and lift it up in
the direction of
.
Insert the batteries, making sure
that they are correctly oriented as shown in the illustration.
When using
AA (R6)
When using
a lithium
batteries
battery pack
4
Close the battery compartment cover in the
direction of . While pressing the
mark, slide the cover in the direction of
.
If the battery compartment cover will not close
easily, do not force it. Try pressing the
with both hands.
mark
If the camera is left for about 1 hour with the batteries removed, the
date and time settings will revert to the factory default settings.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the batteries
Selecting batteries or the optional AC adapter
In addition to the batteries provided, this camera can use the following types
of battery or AC adapter. You are recommended to choose the power source
best suited to the situation.
CR-V3 lithium battery pack (Not rechargeable)
Since the CR-V3 lithium battery pack has a long service life, it is convenient
when traveling.
Do not peel off the label on a CR-V3 lithium battery pack. If an insulating sheet
covers the terminals, peel it off only from the terminals.
NiMH batteries (Rechargeable)
Olympus NiMH batteries are rechargeable and economical. Their low-
temperature resistance makes them a good choice for cold areas.
AA (R6) alkaline batteries
When you need batteries in a hurry, you can use AA (R6) alkaline batteries,
which are easy to get anywhere. However, the number of pictures that you
can store in the camera may vary considerably with AA batteries, depending
on the battery manufacturer, camera shooting conditions, etc. Use this type
of battery only when you have no other choices available. Turn off the monitor
whenever possible to save power.
AC adapter
The optional Olympus AC adapter
Electrical
allows you to power your camera
outlet
from a household electrical outlet.
Use an AC adapter designed to
operate on the AC voltage in the
AC
adapter
area the camera is being used.
Consult your nearest Olympus
dealer or service center for details.
Camera
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the batteries
• Manganese (zinc-carbon) batteries cannot be used.
• If the batteries become exhausted, when the camera is connected to
a PC for a long time while powered by the batteries and you are
downloading images from the camera, the image data may be lost or
damaged. You are therefore recommended to use the optional AC
adapter. However, do not connect or disconnect the AC adapter while
the camera is connected to the PC.
• Do not remove or load the batteries or connect or disconnect the AC
adapter while the camera is turned on. This may affect the camera's
internal settings or functions.
• The life of battery packs may vary according to the type of battery,
manufacturer, camera shooting conditions, etc.
• Power is consumed continuously during the conditions below. This
could reduce the number of pictures that can be taken.
• When the monitor is turned on.
• When the monitor is in the playback mode for an extended
period of time.
• Repeated zooming of lens.
• Repeated auto-focus by depressing the shutter button halfway.
• When the camera is connected to a PC.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Inserting the card (SmartMedia)
This reference manual uses the term “card” when referring to SmartMedia.
The pictures you have taken are stored in the card.
Card basics
Images recorded and stored on the card can easily be erased, overwritten,
and/or edited on a PC.
Contact area
c
Comes into contact with the camera’s signal read contacts.
c
d
Write-protect area
d
Attach the provided write-protect seal when you want to protect
your data from accidental erasure or overwriting.
Index area
e
e
Use the provided index label to indicate the card’s contents.
The following cards can be used:
• Provided standard card
• Optional Olympus CAMEDIA-brand cards (4 MB - 128 MB)
• 2 MB cards cannot be used.
• Commercially available 5 V cards cannot be used.
• This camera may not recognize a non-Olympus card (such as a 3 V
(3.3 V)), or a card that was formatted on another device (such as a
PC, etc.). Before use, be sure to format the card on this camera.
“Formatting (Card setup)” (
p.82)
Handling precautions
• Operating temperature: 0°C to 55°C (32°F to 131°F); Storing
temperature: -20°C to 65°C (-4°F to 149°F); Humidity: up to 95%
• Put the card into its anti-electrostatic case for storage or transportation.
• Do not bend, drop, or apply any physical shock to the card.
• Do not touch the contact area of the card.
• Do not reuse the write-protect seal.
• Read the provided SmartMedia instruction manual carefully.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Inserting the card (SmartMedia)
1
Make sure that:
The lens barrier
is closed.
The monitor is off.
The lamp on the right
of the viewfinder is off.
2
3
Open the card cover.
Insert the card as far as it will go
in the direction shown in the
illustration.
There is an arrow inside the card
cover, indicating the direction in which
the card should be inserted.
Card insertion
direction mark
4
Close the card cover securely until it
clicks.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Inserting the card (SmartMedia)
Removing the card
Hold the card with your fingertips and pull it out
in the direction of the arrow.
Never open the card cover, or remove the card or the batteries while
the camera is turned on. Doing so could destroy all data on the card.
Destroyed data cannot be restored.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Turning the power on/off
When shooting pictures
Power on: Open the lens barrier.
The camera turns on in the shooting mode. The lens extends
and the flash pops up.
Open the lens barrier until it clicks.
If the date and time have reverted to the
factory default settings, Y/M/D appears
on the monitor. “Setting the date and
time” (
p.20)
Power off: Close the lens barrier slightly until it just touches the lens
barrier.
The lens barrier stops just before it touches the lens and the lens
retracts. Wait until the lens is fully retracted before closing the
lens barrier completely.
The camera turns off. (The monitor also turns off.)
Press the flash down manually until it locks in place.
To save battery power, the camera automatically enters the sleep mode
after about 3 minutes of non-operation. If the monitor is on, it will
automatically turn off. The camera activates again as soon as you
lightly press the shutter button or zoom lever. Whenever possible, turn
the camera off when you do not intend to take any pictures for a while.
Do not push the lens barrier forcefully against the lens as this may
damage the lens or cause it to malfunction.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Turning the power on/off
When playing back pictures
Power on: Press the
The camera turns on in the playback mode. The monitor turns
on and the last picture taken is displayed.
(monitor) button with the lens barrier closed.
(monitor) button
Power off: Press the
(monitor) button.
The monitor and the camera turn off.
(monitor) button
When the camera turns on, the monitor may light up for an instant and
a picture appear after a short time. This is not a malfunction.
Never open the card cover, remove the card or the batteries, or connect
or disconnect the AC adapter while the camera is turned on. Doing so
could destroy all data on the card. Destroyed data cannot be restored.
When changing the card, be sure to turn the camera off before opening
the card cover.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Turning the power on/off
What to do if the CARD SETUP screen is displayed
When the power is turned on, the camera checks the card automatically. If
the card in the camera has to be formatted, the following screen appears.
Note that all existing data stored on the card
is erased when the card is formatted.
To turn the camera off
To format the card
Press
to select POWER OFF, then press to select
the (OK/Menu) button. the
The camera turns off.
on the arrow pad
Press
on the arrow pad
FORMAT and press
(OK/Menu) button. Then
select YES and press
start formatting.
again to
Formatting starts.
If the card was successfully
formatted, the camera is ready to
take pictures.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the date and time
6
7
Press
to select one of the
following date formats:
Y-M-D (Year/Month/Day)
M-D-Y (Month/Day/Year)
D-M-Y (Day/Month/Year)
Then press
.
The cursor moves to the next setting field.
The following steps show the procedure used when the date and time
settings are set to Y-M-D.
Press
then press
field.
to set the first field,
to move to the next
Press
to move back to the previous
setting field.
8
9
Repeat the above steps until the
date and time are completely set.
Press
.
For a more accurate setting, press
when the clock hits 00 seconds. The clock
starts when you press
.
10
Close the lens barrier.
The camera turns off.
If the camera is left for about 1 hour with the batteries removed, or if the
battery power is exhausted, the date and time settings may be
canceled or become incorrect. Before taking important pictures, check
that the date and time settings are correct.
The date and time can also be set by the same procedure in the
playback mode.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the menus and tabs
When you turn on the camera and press
, the top menu is displayed on
the monitor. The functions of this camera are set from the menus. This
chapter explains how the menus work, using the shooting mode screens.
Press
.
The top menu is displayed.
Select each menu using
the arrow pad.
Shortcut Menus
Mode Menu
• Let you quickly access the most
frequently used menu settings.
• Display operational buttons at
the bottom of the screen, and let
you select items by pressing
.
• Lets you access the menu
selections to set the metering,
white balance, etc.
• Categorizes the settings into 4
tabs.
• Displays the CAMERA,
PICTURE, CARD and SETUP
tabs. Select the desired tab on
the left of the screen by pressing
.
Tabs
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the menus and tabs
How to use the menus
1
Press
the top menu, then
press
Top menu
to display
2
Press
a tab, then press
display the menu.
to select
to
.
CAMERA tab
To return
to select a
tab, press
.
PICTURE tab
CARD tab
SETUP tab
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the menus and tabs
3
Press
to select the
4
Press
the setting.
to select
desired item, then press
to display the available
setting selections.
Setting is completed
when the setting has
been selected.
or
The green frame moves
to the selected item.
To return to
select an
item, press
or
.
To close the menu,
press
twice.
• Not all items can be selected depending on the status of the camera
and the settings performed. For example, when the movie mode is
selected, you cannot select SEPIA, BLACK&WHITE or
EDIT tab category.
in the
• By pressing the shutter button to take a picture while the menu is
displayed, you can take pictures with the currently selected settings.
• If you want to save the settings after the camera is turned off, set All
Reset to OFF. “Saving the settings (All Reset)” (
p.85)
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the menus and tabs
Shortcut menus
Shooting mode
When the still picture
shooting mode is selected
When the movie recording
mode is selected
DRIVE
Lets you shoot one frame at a time (normal
shooting).
p.30
Lets you shoot pictures in succession.
Lets you shoot movies.
p.46
p.35
Lets you select the resolution and the quality of the image
Still picture : SHQ, HQ, SQ1 and SQ2
p.53
Movie
: HQ, SQ
FUNCTION
Lets you combine two still pictures taken in
succession into one picture.
2 IN 1
p.58
p.60
p.56
Self-portrait mode:
Lets you take a picture of yourself while holding
the camera.
Allows panorama pictures to be taken with
Olympus CAMEDIA-brand SmartMedia cards.
PANORAMA
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the menus and tabs
Playback mode
When a still picture is
played back
When a movie is
played back
Displays all recorded pictures in slide-show fashion.
p.65
p.67
p.87
p.69
MOVIE PLAYBACK
Plays back a movie.
INFO
Displays all the shooting information on the monitor.
ERASE
Erases a selected picture.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the menus and tabs
Mode menus
Mode menu functions are categorized into 4 tabs. Use
tab and display the respective functions.
to select a
Shooting mode
CAMERA tab
PICTURE tab
CARD tab
SETUP tab
CAMERA tab
Adjusts the brightness of the image (Exposure
compensation).
p.47
p.38
Extends the maximum optical zoom, making
possible up to approximately 5x zoom shooting
with the digital zoom function.
DIGITAL ZOOM
METERING
Selects the area of the image that will be used to
determine exposure or image brightness from
p.49
the two available settings: ESP or
metering).
(spot
PICTURE tab
WB
Sets the appropriate white balance according to
the light source.
p.51
p.82
CARD tab
CARD SETUP
Formats a card.
SETUP tab
ALL RESET
Selects whether to save the current camera
settings when you turn off the power.
p.85
p.81
p.84
Turns the beep sound (used for warnings, etc.)
on and off.
Selects whether to display pictures on the
monitor while saving them.
REC VIEW
Adjusts the brightness of the monitor.
Sets the date and time.
p.88
p.20
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the menus and tabs
Playback mode
PLAY tab
EDIT tab
CARD tab
SETUP tab
PLAY tab
Protects pictures from accidental erasure.
p.72
p.77
Rotates pictures 90 degrees clockwise or
counterclockwise.
Stores printing information required for DPOF
printers on the card.
p.92
EDIT tab
BLACK & WHITE
SEPIA
Creates black and white pictures.
Creates sepia-toned pictures.
p.74
p.75
p.76
p.79
Makes the file size smaller.
INDEX
Creates an index picture of a movie in 9 frames.
CARD tab
CARD SETUP
p.82
p.70
Formats a card.
Erases all image data stored on the card.
SETUP tab
ALL RESET
Selects whether to save the current camera
settings when you turn off the power.
p.85
p.81
p.64
p.88
p.20
Turns the beep sound (used for warnings, etc.)
on and off.
Selects the number of frames in the index
display.
Adjusts the brightness of the monitor.
Sets the date and time.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting basics
Holding the camera
Hold the camera firmly with both hands while keeping your elbows at your
sides to prevent the camera from moving.
When taking pictures in the vertical position, hold the camera so that the flash
is at the top.
Horizontal grip
Vertical grip
9
9
Incorrect grip:
Keep your fingers and the strap away from the lens and flash.
Clear images cannot be obtained if the camera shakes as the shutter
button is pressed. Hold the camera securely, and press the shutter
button gently.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Taking still pictures
You can take still pictures using either the viewfinder or the monitor. Both
methods are easy as all you have to do is to press the shutter button.
Taking still pictures using the viewfinder
1
Open the lens barrier.
Slide the lens barrier open until it clicks.
The flash pops up and the lens extends.
2
Position the AF target mark over the
subject in the viewfinder.
When the distance from the camera to the
subject is less than 0.5 m/1.6 ft, select the
macro mode. “Taking close-up pictures
(Macro mode)” (
p.40)
Green lamp
Orange lamp
AF target mark
3
4
Press the shutter button gently
(halfway).
The green lamp on the right of the viewfinder lights
up when the focus and exposure are locked. At this
time the sound of the focusing mechanism can be heard from inside
the camera, but no picture is being taken.
Press the shutter button all the way (fully).
The camera takes the picture.
• While the green lamp is blinking, the subject cannot be brought into
focus. Remove your finger from the shutter button, re-position your
subject and half-press the shutter button again. “If correct focus
cannot be obtained (Focus lock)” (
p.33)
• When the camera is too close to the subject, the green lamp blinks. If
this happens, use the macro mode. “Taking close-up pictures (Macro
mode)” (
p.40)
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Taking still pictures
Taking still pictures using the monitor
1
Open the lens barrier.
Slide the lens barrier open until it clicks.
The flash pops up and the lens extends.
2
Press
.
The monitor turns on.
“Monitor indications” (
p.8)
3
4
Determine the image composition
while observing your subject on the
monitor.
Take the picture by following the
same procedure as for shooting using the viewfinder.
Press the shutter button all the way (fully) to take the picture.
“Taking still pictures using the viewfinder” (
p.30)
When you want to take pictures with the monitor off, press
again.
• While the orange lamp is blinking slowly after the shutter button is
pressed halfway, the flash is charging. While the orange lamp is
blinking quickly after shooting, the picture you just took is being
• If the memory gauge is fully lit, you cannot take any pictures. Wait a
few seconds until the memory gauge goes off to take another picture.
“Memory gauge” (
p.9)
• The monitor is used for checking the image composition. Camera
shake, the correct focus and exposure condition of the recorded
picture should be checked by the close-up playback. “Close-up
playback” (
p.62)
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Taking still pictures
• Press the shutter button gently using the ball of your finger. If it is
pressed hard, the camera may move and pictures may come out
blurred.
• Never open the card cover, remove the batteries or disconnect the
AC adapter while the orange lamp is blinking. Doing so could destroy
stored pictures and prevent storage of pictures you have just taken.
Comparison of the viewfinder & monitor
Viewfinder
Monitor
Camera shake does not
occur easily and subjects
You can check the picture
area that the camera
Advantages
can be seen clearly even in actually records more
bright places. Little battery accurately.
power is used.
When close to a subject,
Camera shake can occur
the image in the viewfinder easily and subjects may be
is a little different from the
picture that the camera
actually records.
difficult to see in bright/dark
places. The monitor uses
more battery power than
the viewfinder.
Disadvantages
Use the viewfinder for
general snapshots
Use the monitor when you
need to know the exact
(landscape pictures, casual area the camera records, or
shots, etc.) or when taking when you want to shoot a
Tips
several pictures in a row
close subject such as a
(approx. 0.5 m/1.6 ft - ∞ ). close-up portrait or flower
(approx. 0.2 m - 0.5 m/0.7 ft
- 1.6 ft).
• The camera records a wider area than the image in the
viewfinder.
• As you get closer to the subject, the actual image
recorded becomes lower than the one in the viewfinder
(see left).
32
Download from Www.Somanuals.com. All Manuals Search And Download.
If correct focus cannot be obtained (Focus lock)
When the subject you want to focus on is not in the center of the frame and
you cannot position the AF target mark on it, you can focus the camera on
another point at roughly the same distance (focus lock) and take the picture
as explained below.
1
Open the lens barrier.
The camera turns on in the shooting
mode.
2
Look into the viewfinder and
position the AF target mark on the
subject.
When shooting a hard-to-focus subject or
a fast-moving subject, point the camera at
an object about the same distance away
as the subject.
Green lamp
3
4
Half-press the shutter button until the green
lamp on the right of the viewfinder illuminates
steady.
The focus and exposure are locked when the green
lamp lights up.
Keeping the shutter button pressed
halfway, recompose your shot in the
viewfinder.
5
Press the shutter button fully.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
If correct focus cannot be obtained (Focus lock)
• When the camera is too close to the subject, the green lamp blinks. If
this happens, use the macro mode. “Taking close-up pictures (Macro
mode)” (
p.40)
• While the green lamp is blinking, the subject cannot be brought into
focus. Remove your finger from the shutter button, re-position your
subject and half-press the shutter button again. “If correct focus
cannot be obtained (Focus lock)” (
p.33)
Subjects that are difficult to focus on
Under certain types of conditions, the auto focus may not work properly. If this
happens, focus on an object with high contrast at the same distance as the
intended subject (focus lock), recompose your shot and then take the picture.
If the subject has no vertical lines, hold the camera vertically and focus the
camera using the focus lock function by pressing the shutter button halfway,
then return the camera to the horizontal position while keeping the button
half-pressed and take the picture.
The green lamp on
the right of the
viewfinder blinks.
The subject cannot
Subject with
low contrast
Subject with an
extremely bright
area in the
Subject without
vertical lines
be brought into
focus.
center of the
frame
The green lamp on
the right of the
viewfinder lights up,
but the subject
cannot be brought
into focus.
Subjects at
different
distances
Fast-moving
subject
The subject to be
focused on is not
in the center of
the frame
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording movies
You can record movies with this camera. Recorded movies can be played
back or stored separately as still pictures using the index function. “Creating
an index” (
p.79)
1
Display the top menu in the shooting mode.
Open the lens barrier.
Press
.
2
3
Press
to select DRIVE.
to select
Press
press
, then
.
Movie recording is set and the menu is
closed.
The total recordable time depending on
the card memory capacity and the
mark are displayed on the monitor.
4
Record the movie while observing
your subject on the monitor.
Press the shutter button fully to start
recording. When you press the shutter
button, the number of seconds remaining
for one record is displayed. Press the
shutter button fully again to stop
recording.
Seconds remaining
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording movies
To cancel movie mode
Press
.
The monitor turns off and the movie mode is canceled.
• The movie mode is canceled when the lens barrier is closed. “Saving
the settings (All Reset)” (
p.85)
• During movie recording, the flash and optical zoom are disabled. To
make a magnified recording, set the digital zoom function to ON.
“Using the digital zoom” (
p.38)”
• It takes longer to store movies than still pictures.
• The seconds remaining varies depending on the record mode and
the amount of space available on the card.
• You cannot record movies with sound.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Zooming in on a subject (Optical zoom/Digital zoom)
Telephoto and wide-angle shooting are possible at 3x magnification using the
optical zoom (equivalent to 38 mm -114 mm on a 35 mm camera). By
combining the 3x optical zoom with the 2.5x digital zoom, you can obtain
zoom magnification of approximately 7.5x (equivalent to 38 mm - 285 mm on
a 35 mm camera). When the record mode is set to SQ2, the 5x digital zoom
is available.
Using the optical zoom
1
Open the lens barrier.
The camera turns on in the shooting
mode.
2
Slide the zoom lever while looking in the
viewfinder.
Press the zoom lever toward
and toward to zoom out.
to zoom in,
3
Take the picture while looking in the viewfinder.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Zooming in on a subject (Optical zoom/Digital zoom)
Using the digital zoom
To use the digital zoom, set the digital zoom to ON in the menu.
The maximum magnification varies on the record mode setting.
When the record mode is set to SQ1, HQ or SHQ : 2.5x
When the record mode is set to SQ2
: 5x
“Selecting the image quality and size (Record mode)” (
p.53)
1
Display the top menu in the shooting mode.
• Open the lens barrier.
• Press
.
2
3
Press
to select MODE MENU.
Press
tab, then press
to select the CAMERA
.
4
5
Press
ZOOM, then press
to select DIGITAL
.
Press
press
to select ON, then
.
The digital zoom is set.
To close the menu, press
.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Zooming in on a subject (Optical zoom/Digital zoom)
6
Slide the zoom lever toward
The zoom indicator is displayed.
.
16
The bar moves on the zoom
indicator according to the
zoom magnification.
• The white section of the zoom indicator indicates the optical zoom. If
the digital zoom is set to ON, a red section appears on the zoom
indicator. When you reach the limit of the optical zoom, the digital
zoom is enabled.
• Pictures taken with the digital zoom may appear grainy.
• Camera shake is likely to occur at higher magnifications. Stabilize the
camera with a tripod, etc. to avoid camera shake.
• Turning the monitor off cancels the digital zoom. However, when the
digital zoom is set to ON, you can use the digital zoom again next
time you turn the monitor on.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Taking close-up pictures (Macro mode)
The macro mode allows you to shoot a subject at a distance of 0.2 - 0.5 m/
0.7 - 1.6 ft.
Normal shooting
With the macro mode
1
Open the lens barrier.
The camera turns on in the shooting
mode.
2
3
Press
.
The monitor turns on and the current
macro setting is displayed.
Press
setting is displayed.
while the current macro
The setting changes between
ON and
OFF each time
is
pressed. When the macro mode is selected, the macro mode indicator
is displayed.
4
Take the picture while observing
your subject on the monitor.
To cancel macro mode, press
repeatedly until
OFF appears. The
disappears.
macro mode indicator
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Taking close-up pictures (Macro mode)
The macro mode is canceled when the lens barrier is closed. “Saving
the settings (All Reset)” (
p.85)
• In the macro mode, keep a minimum distance of 0.2 m - 0.5 m/0.7 ft.
- 1.6 ft. between the camera and the subject. When the camera is too
close to the subject, the green lamp blinks.
• If you use the flash in macro shooting, shadows may be conspicuous
and the correct exposure may not be achieved.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the flash
In the auto-flash mode (factory default setting), the flash is designed to fire
automatically when shooting under low light or against strong backlight, but
you can change the flash mode to suit different shooting situations. Select the
flash mode best suited to the light conditions and the effect you want to
achieve.
1
Open the lens barrier.
The camera turns on in the shooting
mode.
2
Press
.
The current flash setting is displayed.
3
4
Press
setting is displayed.
while the current flash
Each time you press
, the flash mode is
switched in the following sequence:
AUTO -
.
-
-
-
-
Take the picture.
• The flash working range is approximately 2.5 m/8.2 ft.
• The camera returns to the auto-flash mode (factory default setting)
when the lens barrier is closed.“Saving the settings (All Reset)”
(
p.85)
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the flash
• While the orange lamp is blinking, the flash is charging. The shutter
button will not release when the flash is set to fire but the flash is
charging. Wait until the lamp goes off, then retry shooting.
• If you use the flash when shooting at a close distance, shadows may
be conspicuous and the correct exposure may not be achieved.
• In sequential shooting, panorama or movie mode, the flash is disabled.
Auto-flash (No indication)
The flash fires automatically in low light or backlight conditions.
To shoot a subject with backlight, position the AF target mark over the subject
in the viewfinder.
Red-eye reduction flash (
)
The light from the flash may make the subject’s eyes appear red in pictures.
The red-eye reduction flash mode reduces this phenomenon by emitting pre-
flashes before firing the regular flash. This helps accustom the subject’s eyes
to the bright light and minimizes the red-eye phenomenon.
The subject’s eyes appear red.
• After the pre-flashes, it takes about 1 second before the shutter is
released, so do not move the camera and hold it firmly.
• Effectiveness may be limited if the subject is not looking directly at
the pre-flashes, or if the shooting range is too far. Individual physical
characteristics may also limit effectiveness.
Fill-in flash (
)
The flash always fires every time the shutter button is released. This mode is
suitable when you need minimize shadows around the subject (such as the
shade of tree leaves on the subject’s face), in backlight conditions, or under
artificial light such as a fluorescent lamp.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the flash
The fill-in flash may not have the desired effect under excessively bright
light.
Flash off (
)
The flash does not fire even in low light conditions. Use this mode in situations
where flash photography is not desired or is prohibited, or when you want to
shoot a natural-looking twilight or night scene.
Night scene (
)
Use this mode when shooting a subject against a night background. In this
mode, the flash is designed for slow shutter speeds, enabling the flash to
brighten the subject and the slow shutter speed to shoot the background,
ensuring both are exposed.
Night scene with red-eye reduction (
)
Use this mode when shooting a portrait against a night background to reduce
the red-eye phenomenon. In this mode, pre-flashes are emitted to counter the
red-eye phenomenon.
Since a slow shutter speed is automatically selected in low light
situations when the flash off, night scene or night scene with red-eye
reduction flash mode is set, the use of a tripod is recommended to
prevent your pictures from being blurred by camera shake. The orange
lamp lights up to warn of camera shake when the flash off mode is set
in low light situations, but you can take pictures. Note that a moving
subject will be blurred.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced shooting
Using the self-timer
This function is useful for taking pictures with yourself included in the
photograph. Fix the camera securely on a tripod for self-timer shooting.
1
2
Open the lens barrier.
The camera turns on in the shooting mode.
Press
.
The monitor turns on and the current self-
timer setting is displayed.
3
4
Press
while the current self-timer setting is displayed.
The setting changes between
pressed.
ON and
OFF each time
is
Press the shutter button fully.
The self-timer lamp lights up for
approximately 10 seconds, then starts
blinking. After blinking for 2 seconds with
beep sound, the picture is taken.
Self-timer lamp
• The self-timer mode is canceled automatically after taking one picture
or when the lens barrier is closed even if All Reset is set to OFF.
• To cancel shooting after the shutter button has been pressed, press
.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting pictures sequentially (Sequential shooting)
This function allows you to take a rapid succession of still pictures by pressing
and holding the shutter button (over 5 pictures at 1.1 frames per second in
HQ mode). As you can choose the best picture from a series of sequential
shots, you are recommended to use this mode when taking a moving subject.
You can also erase the unwanted shots afterwards. “Single-frame erase”
(
p.69)
1
Display the top menu in the shooting mode.
• Open the lens barrier.
• Press
.
2
3
Press
to select DRIVE.
Press
press
to select
, then
.
Sequential shooting is set and the menu is
closed.
4
Take the pictures.
Press the shutter button fully and keep it pressed. The camera will take
pictures in sequence until you release the button.
• The sequential shooting mode is canceled when the lens barrier is
closed. “Saving the settings (All Reset)” (
p.85)
• During sequential shooting, the flash is displayed.
• Since the shutter speed is set to 1/30 sec. max., exposure is
decreased when shooting a dark subject to prevent camera shake.
• The number of pictures that can be shot in succession and the
sequential shooting speed vary depending on the subject, the record
mode, and the amount of space available on the card.
It takes longer than usual to store pictures after sequential shooting.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Varying the image brightness (Exposure compensation)
This function allows you to make fine changes to the automatic exposure
setting. In some situations, you may get better results when the exposure that
the camera sets is compensated (adjusted) manually. You can adjust the
brightness in the range of ±2.0 in 0.5 steps.
Often white subjects (such as snow) will turn out darker than their natural
colors. Adjusting towards [ + ] makes these subjects closer to their real
shades. For the same reason, adjust towards [ - ] when shooting black
subjects.
−2.0
0
+2.0
1
Display the top menu in the shooting mode.
• Open the lens barrier.
• Press
.
2
3
Press
to select MODE MENU.
Press
tab, then press
to select the CAMERA
.
4
Press
press
to select
, then
.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Varying the image brightness (Exposure compensation)
5
Press
compensation value.
to select the exposure
Select a [ + ] value to brighten the image
or a [ - ] value to darken the image.
The exposure compensation value is set.
To close the menu, press
twice.
6
Take the picture.
• The exposure compensation value returns to ±0 (factory default
setting) when the lens barrier is closed. “Saving the settings (All
Reset)” (
p.85)
• When you adjust the exposure while observing the subject on the
monitor, the brightness of the image displayed also changes.
However, the variation may be less noticeable when the subject is
dark. In this case, play back the recorded picture to confirm that the
exposure is satisfactory.
• If the flash is used, the image brightness (exposure) may differ from
the intended brightness (exposure).
• Exposure compensation cannot correct the image if the surroundings
of the subject are extremely bright or dark.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the metering area (Spot metering)
In a backlight situation, your subject may appear dark if the picture is taken
with the normal metering value (Digital ESP metering). In this case, by
changing the metering area to the center of the viewfinder (Spot metering), a
subject can be shot with optimal exposure regardless of the background light.
Metering settings
ESP (Digital EPS)
: Meters the center of the viewfinder and the area around it
separately to obtain the optimum exposure. (No indication
is displayed on the monitor.)
(Spot metering): Meters only the center of the viewfinder to obtain the
appropriate exposure for the subject.
1
Display the top menu in the shooting mode.
• Open the lens barrier.
• Press
.
2
3
Press
to select MODE MENU.
Press
tab and press
to select the CAMERA
.
4
Press
then press
to select METERING,
.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the metering area (Spot metering)
5
Press
to select
.
Spot metering is set.
To close the menu, press
twice.
6
Take the picture while positioning
the AF target mark on your subject in the viewfinder.
The camera returns to ESP (factory default setting) when the lens
barrier is closed. “Saving the settings (All Reset)” (
p.85)
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the color tone (White balance)
Color reproduction differs depending on the lighting conditions. For instance,
when daylight, the setting sun or tungsten lighting are reflected on white
paper, the shade of white produced will be slightly different for each. By
setting the WB (white balance), you can achieve more natural-looking colors.
White balance settings
AUTO
: The white balance is adjusted automatically so that
colors look natural. (No indication is displayed on the
monitor.)
(Sunlight)
: For natural colors under a clear sky.
(Overcast)
(Tungsten)
(Fluorescent)
: For natural colors under a cloudy sky.
: For natural colors under tungsten lighting.
: For natural colors under fluorescent lighting.
1
Display the top menu in the shooting mode.
• Open the lens barrier.
• Press
.
2
3
Press
to select MODE MENU.
Press
tab, then press
to select the PICTURE
.
4
Press
.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the color tone (White balance)
5
6
Press
white balance modes: AUTO,
or
to select one of the
,
,
.
The white balance is set.
To close the menu, press
twice.
Take the picture.
• The white balance setting returns to AUTO (factory default setting)
when the lens barrier is closed. “Saving the settings (All Reset)”
(
p.85)
• If you want a color tone that resembles what you see under tungsten
lighting, set the white balance mode to
.
• White balance may not be effective under some special light sources.
• After setting a white balance mode other than AUTO, play back the
picture and check the colors on the monitor.
• When the flash is fired with a white balance setting other than AUTO,
colors may appear different in the resulting picture from the colors
you see on the monitor.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the image quality and size (Record mode)
Choose the best record mode for your purposes (printing, editing on a
computer, website editing, etc.).
Still picture record modes
Resolution
(No. of pixels)
Record mode
Description
Quality
File size
Larger
•Use this mode when you 1600 × 1200
Moreclear
pixels*
want to print out an image
with high quality or on
large paper such as A4
(8.3" × 11.7"/21 cm × 29.7
cm), or you want to
SHQ
(Super High
Quality)
process images on a PC.
•The image quality is
higher, but the number of
storable images is fewer. It
takes longer to store the
images.
•Use this mode when you 1600 × 1200
pixels*
want to edit images on a
PC or print them out on
postcard size paper.
•This mode is the factory
default setting.
HQ
(High Quality)
•Use this mode when you 1024× 768
pixels* in SQ1
mode
640 × 480
pixels* in SQ2
mode
want to attach images to
e-mail or simply view them
on a PC.
•This is the standard quality
mode, and the number of
storable images is
SQ
(Standard
Quality)
Normal
Smaller
increased.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the image quality and size (Record mode)
Movie record modes
Resolution
(No. of pixels)
Record mode
Description
Quality
File size
Larger
HQ
You can record continuously 320 × 240
for 15 seconds at a time. pixels*
Moreclear
(High Quality)
for 60 seconds at a time. pixels*
SQ
(Standard
Quality)
Normal
Smaller
* Pixels are the unit used to express the resolution. “Relation between the record mode
and the resolution” ( p.55)
1
Display the top menu in the shooting mode.
• Open the lens barrier.
• Press
.
2
3
Press
to select
.
Press
to select one of the
record modes, then press
.
The record modes for still pictures are
SHQ, HQ, SQ1 and SQ2; and for movies
are HQ and SQ.
The record mode is set and the menu is
closed.
Still picture record modes
4
Take the picture.
• The record mode setting returns to HQ (factory default setting) when
the lens barrier is closed. “Saving the settings (All Reset)” ( p.85)
• Even if you change the movie record mode, the still picture record
mode remains the same.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the image quality and size (Record mode)
Relation between the record mode and the resolution
Resolution
The number of pixels (vertical × horizontal) used when saving an image. If the
image will be printed, higher resolutions (larger numbers) are recommended
so that the image will be clearer. However, higher resolutions make the file
size (amount of data) larger, so the number of pictures that can be saved will
be fewer.
Resolution and picture size on a computer screen
When a picture is transferred to a computer, the size of the picture on the
computer screen varies depending on the computer’s monitor setting. For
instance, a picture taken in 1024 × 768 resolution is the same size as the
screen if you set the picture to 1× when the monitor setting is 1024 × 768.
However, if the monitor setting is over 1024 × 768 (such as 1280 × 1024), the
picture only takes up part of the screen.
Numbers of pictures you can shoot
The table below is the approximate number of storable pictures.
No. of still pictures
Record mode
SHQ
HQ
SQ1
SQ2
SmartMedia capacity
8 MB
5
16
33
29
58
49
99
16 MB
32 MB
64 MB
128 MB
11
22
45
91
66
117
234
469
199
398
798
132
266
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Panorama shooting
You can take advantage of panorama shooting with the provided Olympus
CAMEDIA-brand SmartMedia card. (Non-Olympus cards do not support this
feature.) Panorama shooting lets you connect pictures with overlapping
edges into a single panoramic picture, using the provided CAMEDIA Master
software.
1
Display the top menu in the shooting mode.
• Open the lens barrier.
• Press
.
2
3
Press
to select FUNCTION.
Press
then press
to select PANORAMA,
.
The panorama mode is set and the
monitor turns on automatically.
4
Press the arrow pad to select the
direction that you want to connect
pictures.
:
:
:
Connects the pictures from left to
right.
Connects the pictures from right to
left.
Connects a series of
pictures from left to right.
Connects the pictures from bottom
to top.
: Connects the pictures from top to
bottom.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Panorama shooting
5
Make sure that the edges of the pictures overlap, then take
your pictures.
Panorama shooting is possible for up to 10 pictures.
Compose your shots so that they overlap to from one picture.
When you try to take more than 10
pictures, the mark is displayed.
6
Press
to finish panorama shooting.
The panorama mode is canceled when
barrier is closed.
is pressed or the lens
• The panorama mode is only available with Olympus CAMEDIA-brand
SmartMedia cards.
• Exposure and white balance are set by the first picture. Do not select
an extremely bright subject (such as the sun) for the first picture.
• Your computer’s memory may be insufficient if you take too many
panorama pictures in HQ/SHQ mode. You are recommended to use
SQ1/SQ2 mode for panorama shooting.
• During panorama shooting, the flash, sequential shooting and self-
timer functions are disabled.
• The camera itself cannot edit panorama pictures. To connect each
picture, the CAMEDIA Master software is necessary.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Taking two-in-one pictures
This function allows you to combine two pictures
taken in succession and store them as a single
picture.
Picture when played back
1
Display the top menu in the shooting
mode.
• Open the lens barrier.
• Press
.
2
3
Press
to select FUNCTION.
Press
press
to select 2 IN 1, then
.
The two-in-one picture mode is set and
the monitor turns on automatically.
4
Take the first shot while observing
your subject on the monitor.
The subject is positioned on the left.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Taking two-in-one pictures
5
Take the second shot in succession.
The subject is positioned on the right.
Picture when shooting
• The two-in-one picture mode is canceled when
lens barrier is closed.
is pressed or the
• During two-in-one picture shooting, the sequential shooting and self-
timer functions are disabled.
• Press
to cancel the two-in-one picture mode after the first shot
has been taken. The first picture will not be stored.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Taking a picture of yourself (Self-portrait shooting)
To enable you to hold the camera at arm’s
length and take a picture of yourself, the
camera automatically selects the optimal
settings for self-portrait shooting.
1
Display the top menu in the shooting mode.
• Open the lens barrier.
• Press
.
2
3
Press
to select FUNCTION.
Press
press
to select
, then
.
Self-portrait mode is set and the camera
returns to the shooting mode.
4
Take the picture.
The zoom position is automatically set to wide.
• The self-portrait mode is canceled when
barrier is closed.
is pressed or the lens
• During the self-portrait shooting, the sequential shooting and digital
zoom are disabled.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
Playing back still pictures
You can play back pictures one by one on the monitor.
1
Press
with the lens barrier closed.
The monitor turns on and displays the last
picture taken. (Single-frame playback)
2
Press
.
Jumps tothepicture10
frames behind.
Displays the previous
picture.
Displays the next
picture.
Jumps to the picture
10 frames ahead.
3
Press
to cancel playback.
The monitor and camera turn off.
When the camera turns on, the monitor may light for an instant and
show a picture after a while.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing back still pictures
Quick View (Double-click playback)
This function lets you play back pictures during shooting with the lens barrier
open. It is useful when you want to check shooting results and resume
shooting quickly.
1
Press
twice quickly (double-click) in the shooting mode.
The camera immediately enters the playback mode and displays the
last picture taken. (Single-frame playback)
2
Press shutter gently (halfway).
The camera returns to the shooting mode and you can resume
shooting.
Functions available in normal playback mode are also available in
Quick View.
Close-up playback
Pictures displayed on the monitor can be enlarged 1.5, 2, 2.5 or 3 times. This
function is useful when you want to check the details of a picture.
1
Press
The monitor turns on and displays the last picture taken.
Press to select the picture you want to enlarge.
with the lens barrier closed.
2
Press the zoom lever toward
.
The picture is magnified 1.5 times. The
magnification increases each time the
zoom lever is pressed.
To return the picture to the original size
(1x), press the zoom lever toward
.
3
By pressing while the
enlarged picture is displayed, you can scroll the picture in the
desired direction, enabling you to view a different section.
The close-up playback function is not available for movies.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing back still pictures
Index display
This function lets you show several pictures at the same time on the monitor.
It is useful for quickly finding the picture you want to view. The number of
pictures shown can be 4, 9 or 16. “Selecting the number of pictures”
(
p.64)
1
Press
with the lens barrier closed.
The monitor turns on and displays the last picture taken. (Single-frame
playback)
2
3
Press the zoom lever toward
enter the index display mode.
to
Use the arrow pad to select a frame.
The selected picture is highlighted in the
green frame.
: Moves to the previous frame.
: Moves to the next frame.
: Jumps to the previous index
display (the frames before the top
left frame).
: Jumps to the next index display (the frames following the
bottom right frame).
4
To return to single-frame playback,
press the zoom lever toward
.
The picture highlighted in the green frame
is displayed in the single-frame playback
mode.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing back still pictures
Selecting the number of pictures
This function lets you change the number of pictures, 4, 9 or 16, in an index
display.
1
Display the top menu in the playback mode.
• Press
• Press
with the lens barrier closed.
.
2
3
Press
to select MODE MENU.
Press
tab, then press
to select the SETUP
.
4
5
Press
press
to select
, then
.
Press
to select 4, 9 or 16.
The number of pictures in the index
display is set.
To close the menu, press
twice.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
|