Olympus Camcorder 227670 User Manual

DIGITAL CAMERA

SP-600UZ

Instruction Manual

●

Thank you for purchasing an Olympus digital camera. Before you start to

use your new camera, please read these instructions carefully to enjoy

optimum performance and a longer service life. Keep this manual in a

safe place for future reference.

●

The application software and instruction manual PDF ﬁle are stored on

the internal memory of the camera.

We recommend that you take test shots to get accustomed to your

camera before taking important photographs.

In the interest of continually improving products, Olympus reserves the

Download from Www.Somanuals.com. ^rA^ighll^{t t}M^{o u}a^pn^dau^tea^ols^{r m}S^ode^ifa^yrⁱⁿc^foh^rmA^atn^iod^{n c}D^ono^taw^inen^dloⁱⁿa^thd^is.^manual.

Camera Settings

Using the Direct Buttons

Frequently used functions can be accessed using the direct buttons.

Operation guide

The symbols FGHI displayed for image selections

and settings indicate that the wheel controller is to

be used by pressing, not turning, the wheel controller

sections shown below.

4/30

TIME

12M

N^ORM

Y/M/D

2010.02.26 12:30

FILE

100 0004

’10/02/26 12:30

SET

SINGLE PRINT

CANCEL

Wheel controller

F (up) /

INFO button (changing

information display) (p. 16, 18)

Zoom lever (p. 15, 18)

H (left)

I (right)

Shutter button (p. 14, 51)

Movie record button (p. 15)

A button

G (down) /

D button (erase) (p. 17)

qbutton (switching

between shooting and

playback) (p. 15, 16, 40)

Operation guides displayed at the bottom of the screen

indicate that the m button, A button, or zoom lever

be used.

IMAGE SIZE

COMPRESSION

SHADOW ADJUST

AF MODE

12M

NORMAL

AUTO

m button (p. 4)

FACE/iESP

ESP

ESP/

FINE ZOOM

DIGITAL ZOOM

OFF

E button (menu guide/

camera guide) (p. 19)

SEL. IMAGE

SET

EXIT

SET

ERASE/CANCEL

Operation guide

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Menu

Use the menu to change camera settings such as the shooting mode.

Press the m button to display the function menu. The function menu can be used to set frequently

used shooting and playback functions such as shooting mode.

Selected option

Shooting

Playback

Shooting

mode

PROGRAM AUTO

SLIDESHOW

PHOTO SURFING

EVENT

BEAUTY FIX

EDIT

Function

0.0

AUTO

ERASE

ISO

AUTO

o [SETUP]

SETUP

12M

To select the shooting mode

Use FG to select a menu and press

Use HI to select the shooting mode and

press the A button.

the A button.

To select the function menu

Use FG to select a menu and use HI to

select a menu option. Press the A button to

set the function menu.

In the [SETUP] menu, various camera functions can be set,

including shooting and playback functions not displayed in the

function menu, and other settings such as date, time and screen

display.

Select [SETUP] and then press the A

button.

Use FG to select the desired submenu 2

and then press the A button.

● The [SETUP] menu is displayed.

● Once a setting is selected, the display returns

to the previous screen.

IMAGE SIZE

12M

COMPRESSION

SHADOW ADJUST

AF MODE

NORMAL

AUTO

There may be additional operations.

“Menu Settings” (p. 29 to 45)

FACE/iESP

ESP

ESP/

--.--.-- --:--

FINE ZOOM

DIGITAL ZOOM

OFF

WORLD TIME

TV OUT

OFF

SET

EXIT

POWER SAVE

REC VIEW

PIC ORIENTATION ON

Press H to select the page tabs. Use FG

to select the desired page tab and press I.

SET

EXIT

Page tab

Submenu 1

Press the m button to complete the

--.--.-- --:--

WORLD TIME

TV OUT

WORLD TIME

TV OUT

setting.

POWER SAVE

REC VIEW

OFF

POWER SAVE

REC VIEW

OFF

Some functions cannot be used in some

shooting modes. In such cases, the

following message is displayed after

setting.

PIC ORIENTATION ON

SET

EXIT

SET

EXIT

IMAGE SIZE

12M

NORMAL

AUTO

COMPRESSION

SHADOW ADJUST

Use FG to select the desired submenu 1

and then press the A button.

Submenu 2

CONFLICTING SETTINGS

AF MODE

iESP

ESP

OFF

ESP/*1

FINE ZOOM

DIGITAL ZOOM

WORLD TIME

TV OUT

--.--.-- --:--

WORLD TIME

TV OUT

--.--.-- --:--

POWER SAVE

HOME

SET

EXIT

VIDEO OUT

OFF

POWER SAVE

REC VIEW

OFF

REC VIEW

PIC ORIENTATION ON

PIC ORIENTATION

SET

EXIT

SET

EXIT

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu Index

Menus for Shooting Functions

PROGRAM AUTO

IMAGE SIZE

COMPRESSION

SHADOW ADJUST

AF MODE

12M

NORMAL

OFF

_IMA_AGU_ET_SO_TABILIZER

IMAGE SIZE

VGA

FACE/iESP

AF ILLUMINAT.

IMAGE QUALITY NORMAL

ESP/

ESP

0.0

ICON GUIDE

IS MOVIE MODE

OFF

FINE ZOOM

DIGITAL ZOOM

OFF

AUTO

ISO

FULLTIME AF

OFF

SET

AUTO

EXIT

SET

EXIT

12M

SET

EXIT

ESP/n ............................p.30

FINE ZOOM ......................p.31

DIGITAL ZOOM.................p.31

R (Still images)..................p.31

R (Movies).........................p.31

IMAGE STABILIZER

(Still images)/

IS MOVIE MODE

(Movies).............................p.32

FULLTIME AF....................p.32

AF ILLUMINAT. .................p.32

ICON GUIDE.....................p.32

1 Shooting mode

P (PROGRAM AUTO).......p.14

7 ISO ....................................p.27

8 Drive..................................p.28

9 o (SETUP)

(iAUTO)....................p.20

s (SCENE MODE) ......p.20

P (MAGIC FILTER).....p.21

A (PANORAMA)...............p.22

Q(BEAUTY)................p.24

2 Flash..................................p.25

3 Macro ................................p.25

4 Self-timer...........................p.26

5 Exposure compensation....p.26

6 White balance....................p.27

IMAGE SIZE

(Still images)......................p.29

IMAGE SIZE (Movies).......p.29

COMPRESSION

(Still images)......................p.29

IMAGE QUALITY

(Movies).............................p.29

SHADOW ADJUST ...........p.30

AF MODE..........................p.30

Menus for Playback, Editing, and Printing Functions

SLIDESHOW

PHOTO SURFING

EVENT

PRINT ORDER

COLLECTION

BEAUTY FIX

EDIT

SET

EXIT

ERASE

SETUP

y (Rotate).........................p.38

R (Add sound to still images)

.......................................p.38

1 SLIDESHOW.....................p.33

2 PHOTO SURFING.............p.33

3 EVENT q........................p.34

4 COLLECTION q.............p.34

5 BEAUTY FIX......................p.35

6 EDIT ..................................p.36

7 ERASE ..............................p.37

8 o (SETUP)

PRINT ORDER..................p.38

0(Protect) .....................p.38

Menus for Other Camera Settings

PW ON SETUP .................p.40

SOUND SETTINGS ..........p.41

FILE NAME .......................p.41

PIXEL MAPPING...............p.42

s (Monitor).....................p.42

1 r (Settings 1)

INTERNAL/SD...................p.39

MEMORY FORMAT/

FORMAT............................p.39

DATA REPAIR ...................p.39

u COPY.....................p.39

D (Language) ................p.39

RESET...............................p.40

USB CONNECTION..........p.40

2 s (Settings 2)

INTERNAL/SD

MEMORY FORMAT

DATA REPAIR

COPY

AUTO

ENGLISH

3 t (Settings 3)

RESET

X(Date/time)..................p.42

WORLD TIME....................p.43

TV OUT .............................p.43

POWER SAVE...................p.45

REC VIEW.........................p.45

PIC ORIENTATION ...........p.45

USB CONNECTION

EXIT

SET

qPOWER ON ................p.40

SAVE SETTINGS..............p.40

Download from Www.Somanuals.com. All Manuals Search And Download.

Names of Parts

Camera unit

Self-timer lamp/

Battery/card compartment lock ....p. 10

Battery/card compartment cover...p. 10

Card slot.......................................p. 13

Flash knob (Flash ﬂip-up).............p. 25

AF illuminator .........................p. 26, 32

Flash ............................................p. 25

Microphone ............................p. 31, 38

Lens .............................................p. 56

Tripod socket

10 DC-IN jack

Download from Www.Somanuals.com. All Manuals Search And Download.

Strap eyelet..................................p. 10

Monitor .........................p. 8, 14, 42, 51

Indicator lamp

m button ..............................p. 3, 4

10 Connector cover............... p. 11, 44, 46

11 HDMI micro connector .................p. 44

12 Multi-connector................. p. 11, 44, 46

13 Speaker

Movie record button .....................p. 15

5 qbutton (switching between

shooting and playback) ....p. 15, 16, 40

14 Zoom lever .............................p. 15, 18

15 Shutter button.........................p. 14, 51

16 n button........................p. 12, 14

A button (OK) ...............................p. 3

Wheel controller .............................p. 3

INFO button (changing

information display).............p. 16, 18

D button (erase) .......................p. 17

E button

(camera guide/menu guide) .........p. 19

Download from Www.Somanuals.com. All Manuals Search And Download.

Monitor

Shooting mode display

0.0

AUTO

ISO

AUTO

00:34

12M

N^ORM

17 16 15 14 13 12 11

1/100 F3.5

26 25

Still image

Battery check .........................p. 10, 52

Shooting mode.......................p. 14, 20

Flash ............................................p. 25

Flash standby/ﬂash charge ..........p. 51

Macro/super macro ......................p. 25

Self-timer......................................p. 26

Exposure compensation...............p. 26

White balance ..............................p. 27

ISO...............................................p. 27

Drive.............................................p. 28

14 Shadow Adjustment Technology

....................................................p. 30

15 Compression (still images).....p. 29, 58

16 Image size (still images).........p. 29, 58

17 Number of storable still pictures

(still images).................................p. 14

18 Current memory ...........................p. 57

19 Movie recording icon....................p. 15

20 Remaining recording time

(movies) .......................................p. 15

21 Image size (movies).....................p. 29

22 Histogram.....................................p. 16

23 AF target mark .............................p. 14

24 Camera shake warning

10 [SETUP] menu ...........................p. 4, 5

11 World time....................................p. 43

12 Image stabilization (still images)/

Digital image stabilization (movies)

....................................................p. 32

13 Metering .......................................p. 30

25 Aperture value..............................p. 14

26 Shutter speed...............................p. 14

Download from Www.Somanuals.com. All Manuals Search And Download.

Playback mode display

● Standard display

3 4

5 6

4/30

00:12/00:34

’10/02/26 12:30

Still image

● Advanced display

Movie

3 4

5 6

10 11

4/30

1/1000 F3.5

2.0

ISO WB

AUTO AUTO

1/1000 F3.5

2.0

12M

N^ORM

ISO WB

AUTO AUTO

FILE

12M

N^ORM

100 0004

FILE

100 0004

’10/02/26 12:30

Battery check .........................p. 10, 52

Print reservation/

11 Exposure compensation...............p. 26

12 White balance ..............................p. 27

13 Compression (still images).....p. 29, 58

Image quality (movies)...........p. 29, 58

14 Image size..............................p. 29, 58

15 Drive.............................................p. 28

16 File number

number of prints .....................p. 49, 48

Protect..........................................p. 38

Adding sound .........................p. 31, 38

Current memory ...........................p. 57

Number of frame/total number of

images (still images) ....................p. 16

Elapsed time/total recording time

17 Date and time...............................p. 12

18 Metering .......................................p. 30

19 Shadow Adjustment Technology

...................................................p. 30

20 Flash ............................................p. 25

21 Shooting mode.......................p. 14, 20

22 Macro ...........................................p. 25

(movies) .......................................p. 17

Histogram.....................................p. 16

Shutter speed...............................p. 14

Aperture value..............................p. 14

10 ISO...............................................p. 27

Download from Www.Somanuals.com. All Manuals Search And Download.

Preparing the Camera

Attaching the camera strap

and lens cap

Inserting the battery

Battery/card

compartment lock

● Slide the battery/card compartment lock from )to

=and ensure that the battery/card compartment

cover is securely locked (7). Failure to do so may

cause the battery/card compartment cover to open

during shooting and the batteries to fall out, resulting

in loss of image data.

For the types of batteries that can be used,

see “Battery” (p. 56). If using rechargeable

batteries, charge the batteries.

Turn off the camera before opening the

battery/card compartment cover.

● Attach the strap to the other eyelet in the same manner.

When using the camera, be sure to close

the battery/card compartment cover.

When to replace the batteries

Replace the batteries when the error

message shown below appears.

Flashes in red

Pull the strap tight so that it does not come

loose.

BATTERY EMPTY

12M

Monitor top left

Error message

10 EN

Download from Www.Somanuals.com. All Manuals Search And Download.

Camera setup

Select and execute “OLYMPUS

Camera Initialization”, which is

displayed on the computer screen

when the camera is recognized by

the computer.

Connect the camera to the computer and setup

the camera.

System requirements

Windows XP (SP2 or later) /

Windows Vista / Windows 7

If nothing is displayed on the camera screen

even after connecting the camera to the

computer, the battery may be exhausted.

In this case, disconnect the camera, and

reconnect after replacing the battery with a

new one.

When using another system other

than the above or no computer, see

“Setting the date, time and time zone”

(p. 12)

Even if a computer has USB ports, proper

operation is not guaranteed in the following

cases.

Connect the camera to the

computer.

● Computers with USB ports installed using an

expansion card, etc.

Open the connector cover

in the direction of the arrow.

● Computers without a factory-installed OS and

home-built computers

Double-click the icon for the camera drive

(Removable Disk), and then execute

CameraInitialSetup.exe to start the camera

setup.

Multi-connector

Follow the instructions on the

computer screen and setup the

camera.

USB cable (supplied)

When using a computer with system

other than Windows XP (SP2 or later)/

Windows Vista / Windows 7

The Instruction Manual PDF ﬁle can be

saved on a computer with the following

procedure.

● Connect the camera to the computer and copy

the instruction manual PDF ﬁle for your language

in the “Manual” folder in the internal memory of

the camera.

Camera setup

Set the camera date and time, time zone and

display language automatically; install the

camera instruction manual and PC software

(ib); then perform user registration.

Do not insert SD/SDHC memory cards

before the camera setup.

Do not format the internal memory until the

camera setup is complete. Doing so will

erase the camera instruction manual and

the PC software (ib) data that are stored on

the internal memory.

Check that your computer meets the

following system requirements:

Windows XP (SP2 or later) /

Windows Vista / Windows 7

Refer to the PC software (ib) help guide for

details on how to use the PC software (ib).

EN 11

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting the date, time and

time zone

As in Steps 2 and 3, use FGHI

and the A button to set [M]

(month), [D] (day), [TIME] (hours

and minutes), and [Y/M/D] (date

order).

The date and time set here are saved to image

ﬁle names, date prints, and other data.

Press the n button to turn on

the camera.

For a more accurate setting, press the

A button when the time signal hits

00 seconds.

● The date and time setting screen is displayed

when the date and time are not set.

To change the date and time, adjust the

setting from the menu. [X] (Date/time)

(p. 42)

TIME

Use HI to select the [x] time

zone and then press the A button.

● Use FG to turn daylight saving time ([SUMMER])

on or off.

Y/M/D

----

-- -- --

CANCEL

’10.02.26.12:30

Date and time setting screen

Seoul

Tokyo

Use FG to select the year for [Y].

SET

SUMMER

TIME

Y/M/D

2010. --

-- -- --

The menus can be used to change the

selected time zone. [WORLD TIME] (p. 43)

CANCEL

Press I to save the setting for [Y].

TIME

Y/M/D

2010.00. -- -- --

CANCEL

12 EN

Download from Www.Somanuals.com. All Manuals Search And Download.

Changing the display language

The language for the menu and error messages

displayed on the monitor is adjustable.

Write-protect

switch

Display the [SETUP] menu.

“Using the Menu” (p. 4)

Use FG to select the

(Settings

1) tab and then press I.

INTERNAL/SD

AUTO

Insert the card straight until it clicks into

place.

MEMORY FORMAT

DATA REPAIR

Do not touch the contact area directly.

COPY

ENGLISH

RESET

USB CONNECTION

SET

EXIT

Use FG to select [D] and press

the A button.

“Number of storable pictures (still images)/

Remaining recording time (movies) in the

internal memory and SD/SDHC memory

cards” (p. 58)

Use FGHI to select your

language and press the A button.

Press the m button.

To remove the SD/SDHC memory card

Inserting the SD/SDHC

memory card (sold separately)

Always use SD/SDHC memory cards with

this camera. Do not insert other types of

memory card. “Using an SD/SDHC memory

card” (p. 57)

Although the camera can store images in

internal memory, SD/SDHC memory cards

(sold separately) can be also used to store

pictures.

Press the card in until it clicks and comes

out slightly, then remove the card.

EN 13

Download from Www.Somanuals.com. All Manuals Search And Download.

Shooting, Playback, and Erasing

Shooting with the optimum

Hold the camera and compose the

shot.

aperture value and shutter

speed (P mode)

In this mode, automatic shooting settings are

activated while also allowing changes to a wide

range of other shooting menu functions, such

as exposure compensation, white balance, etc.

as needed.

Monitor

Horizontal grip

Remove the lens cap.

Press the n button to turn on

the camera.

P mode indicator

Vertical grip

When holding the camera, take care not to

cover the ﬂash with your ﬁngers, etc.

0.0

AUTO

ISO

Press the shutter button halfway

down to focus on the subject.

● When the camera focuses on the subject, the

exposure is locked (shutter speed and aperture

value are displayed), and the AF target mark

changes to green.

AUTO

00:34

12M

Number of storable still pictures (p. 58)

Monitor

(standby mode screen)

● The camera was unable to focus if the AF target

mark ﬂashes red. Try focusing again.

If P mode is not displayed, press the m

button to display the function menu screen

and then set the shooting mode to P. “Using

the Menu” (p. 4)

AF target mark

Current shooting mode display

PROGRAM AUTO

Press halfway

1/400 F3.5

Shutter speed Aperture value

“Focusing” (p. 53)

0.0

AUTO

ISO

AUTO

12M

Press the n button again to turn off

the camera.

14 EN

Download from Www.Somanuals.com. All Manuals Search And Download.

To take the picture, gently press

the shutter button all the way down

while being careful not to shake the

camera.

Press the movie record button

again to stop recording.

Using the zoom

Turning the zoom lever adjusts the shooting

range.

W side

T side

Press fully

1/400 F3.5

Zoom bar

Image review screen

To view images during shooting

Pressing the qbutton enables playback of

images. To return to shooting, either press

the qbutton or press the shutter button

halfway down.

0.0

AUTO

ISO

AUTO

00:34

12M

Optical zoom: 15x, Digital zoom: 5x

Shooting movies

To take larger images without reducing

image quality

[FINE ZOOM] (p. 31)

Press the movie record button to

start recording.

To take larger images

[DIGITAL ZOOM] (p. 31)

Remaining recording time (p. 58)

The zoom bar appearance identiﬁes the

status of the ﬁne zoom/digital zoom.

When using

optical zoom

Optical zoom range

00:34

REC

00:12

When using

ﬁne zoom

Recording time

Fine zoom

range

Lights up red when recording

When using

digital zoom

The effects of the set shooting mode can

be used when shooting movies (when

P mode, A mode or Q mode is

set, shooting is performed with the P mode

setting).

Digital zoom

range

Sound will also be recorded.

During sound recording, only the digital

zoom can be used. To record a movie with

optical zoom, set [R] (movies) (p. 31) to

[OFF].

EN 15

Download from Www.Somanuals.com. All Manuals Search And Download.

Changing the shooting

information display

Viewing images

The display of the screen information can

be changed to best match the situation, for

example, the need for a clear view of the screen

or for making a precise composition by using the

grid display.

Press the q button.

Number of frames/

Total number of images

4/30

Press F (INFO).

● The displayed shooting information changes in

the order shown below each time the button is

pressed. “Shooting mode display” (p. 8)

Normal

’10/02/26 12:30

Playback image

0.0

AUTO

No information

ISO

AUTO

Turn the wheel controller to select

an image.

00:34

12M

● It can be performed by pressing HI.

Detailed

Displays

next image

image

0.0

AUTO

ISO

AUTO

00:34

12M

NORM

Keep turning the wheel controller to fast

forward or reverse. It can be performed by

holding HI.

Reading a histogram

The display size of the images can be

changed. “Index view, close-up view, and

event index” (p. 18)

If the peak ﬁlls too much of the frame,

the image will appear mostly white.

If the peak ﬁlls too

much of the frame,

the image will

To play sound recordings

To play sound recorded with an image,

select the image and press the A button. A

! icon appears on images with which sound

has been recorded.

appear mostly black.

The green section shows

luminance distribution

within the screen’s center.

[R] (still images) (p. 31)

During audio playback

16 EN

Download from Www.Somanuals.com. All Manuals Search And Download.

To play back movies

Operations while playback is paused

Select a movie, and press the A button.

4/30

00:14/00:34

During pause

MOVIE PLAY

’10/02/26 12:30

Movie

Use F to display the ﬁrst

Cueing

frame and press G to display

the last frame.

Operations during movie playback

Turn the wheel controller to

advance or rewind by one

frame at a time. Keep turning

the wheel controller for

Advancing

and rewinding

one frame at a

time^*1

continuous advance or rewind.

Resuming

playback

Press the A button to resume

playback.

Elapsed time/

Total recording

time

00:12/00:34

To operate with HI

During playback

Press I or H to advance or rewind one frame

at a time. Hold I or H pressed for continuous

advance or rewind.

Press the A button to pause

playback. During pause, fast

forward or reverse, press the

A button to restart playback.

Pausing and

restarting

playback

To stop movie playback

Press the m button.

Press I to fast forward. Press

Fast forward I again to increase the fast

forward speed.

Erasing images during

Press H to rewind. The speed

at which the recording rewinds

playback (Single image erase)

Rewind

increases each time H is

pressed.

Display the image you want to erase

Turn the wheel controller

and press G ( ).

Adjusting the

or use FG to adjust the

volume

volume.

ERASE

ALL ERASE

SEL. IMAGE

ERASE

CANCEL

SET

BACK

Press FG to select [ERASE], and

press the A button.

[ALL ERASE] (p. 37) and [SEL. IMAGE]

(p. 37) can be used to erase multiple images

at the same time.

EN 17

Download from Www.Somanuals.com. All Manuals Search And Download.

To select an image in index view

Index view, close-up view, and

event index

Use FGHI to select an image, and press

the A button to display the selected image

in single-image view.

Index view enables quick selection of a desired

image. Close-up view (up to 10x magniﬁcation)

allows checking of image details. In event

index^*1, images are grouped by the shooting

dates and representative images for an event

can be displayed.

To scroll an image in close-up view

Use FGHI to move the viewing area.

To select an image in event index

Pictures with different dates can be grouped into the

same event using the PC software (ib).

Use HI to select the representative image

and press the A button. The images in the

selected event are played back.

Turn the zoom lever.

Changing the image

information display

Shooting information settings displayed on the

screen can be changed.

W side

T side

Close-up view

Single-image view

Press F (INFO).

● The displayed image information changes in

the order shown below each time the button is

pressed.

4/30

Normal

’10/02/26 12:30

4/30

No information

Index view

’10/02/26 12:30

’10/02/26

Detailed

4/30

1/1000 F3.5

2.0

ISO WB

AUTO AUTO

12M

N^ORM

’10/02/26

FILE

100 0004

’10/02/26 12:30

“Reading a histogram” (p. 16)

Event index

’10/02/26

18 EN

Download from Www.Somanuals.com. All Manuals Search And Download.

Playing back panorama

images

Using the menu guide

If the E button is pressed while settings are

being adjusted in the playback function or

[SETUP] menus, a description of the selected

option is displayed.

Panorama images that were combined together

using [AUTO] or [MANUAL] can be scrolled for

viewing.

“Using the Menu” (p. 4)

“Creating panoramic images (A mode)”

(p. 22)

Using the camera guide

Select a panorama image during

playback.

Use the camera guide to look up camera

operations.

“Viewing images” (p. 16)

4/30

Press the E button in the standby

mode screen or the playback

screen.

IN-CAMERA MANUAL

Learn about the camera

History

REPLAY

’10/02/26 12:30

Message

Press the A button.

EXIT

SET

Submenu 2

Application

Functions or operating methods

can be searched from a term or

shooting objective.

Information is shown about

recommended functions and basic

operating methods for the camera.

Learn about the

camera

Current viewing area

Searches can be performed from

the search history.

History

Messages from the camera can

be viewed.

To control panorama image playback

Message

Zoom in/Zoom out: Press the A button to

pause playback. Then turn the zoom lever to

enlarge/shrink the image.

Playback direction: Press the A button

to pause playback. Then press FGHI

to scroll the image in the direction of the

pressed button.

Use FG to select the desired item

and press the A button to set.

IN-CAMERA MANUAL

Pause: Press the A button.

Restart scrolling: Press the A button.

Stop playback: Press the m button.

Learn about the camera

History

Message

EXIT

SET

● Follow the on-screen instructions to search the

desired contents.

EN 19

Download from Www.Somanuals.com. All Manuals Search And Download.

Using Shooting Modes

To change the shooting mode

Using the best mode for the

shooting scene (s mode)

The shooting mode (P, M, s, P,

A, Q) can be changed with using the

function menu.

Set the shooting mode to s.

“Using the Menu” (p. 4)

SCENE MODE

Shooting with automatic

settings (M mode)

The camera will automatically select the optimal

shooting mode for the scene. This is a fully

automatic mode that allows you to take a picture

suited to the scene by simply pressing the

shutter button. In M mode, settings in the

shooting menu can be selected, but the changed

setting is not reﬂected in the actual shot.

0.0

AUTO

12M

Press G to go to the submenu.

Set the shooting mode to M.

PORTRAIT

The icon changes depending on the scene

that the camera automatically selects.

0.0

AUTO

12M

Use HI to select the mode and

then press the A button to set.

00:34

12M

N^ORM

In some cases, the camera may not select

the desired shooting mode.

When the camera cannot identify the

optimal mode, P mode will be selected.

0.0

AUTO

00:34

12M

Icon indicating the scene mode

that is set

20 EN

Download from Www.Somanuals.com. All Manuals Search And Download.

Shooting with special effects

In s modes, the optimum shooting

settings are pre-programmed for speciﬁc

shooting scenes. For this reason, settings

may not be changed in some modes.

(P mode)

To add expression to your photo, select the

desired special effect.

Option

Application

BPORTRAIT/FLANDSCAPE/

Set the shooting mode to P.

GNIGHT SCENE^*1/

The camera

takes a picture

using the

optimum settings

for the scene

conditions.

NIGHT+PORTRAIT /

MAGIC FILTER

CSPORT/NINDOOR/

WCANDLE^*1/

SELF PORTRAIT/

SUNSET /XFIREWORKS /

CUISINE/dDOCUMENTS/

0.0

qBEACH & SNOW/PET

AUTO

When the subject is dark, noise reduction is

automatically activated. This approximately doubles

the shooting time during which no other pictures can

be taken.

12M

Press G to go to the submenu.

To take pictures of a moving subject

like a pet ([ PET] mode)

POP ART

1Use HI to select [ PET], and press

the A button to set.

2Hold the camera to align the AF target

mark on the subject and press the A

button.

0.0

AUTO

● When the camera recognizes the subject,

the AF target mark automatically tracks the

subject movement to focus on it continuously.

“To focus on a moving subject continuously

(AF Tracking)” (p. 30).

Use HI to select the desired effect

and then press the A button to set.

0.0

AUTO

00:34

12M

Icon indicating P mode that

is set

Shooting mode

Option

[POP ART

\PIN HOLE

]FISH EYE

@DRAWING

MAGIC FILTER

In P mode, the optimum shooting

settings are pre-programmed for each

scene effect. For this reason, some settings

cannot be changed in some modes.

EN 21

Download from Www.Somanuals.com. All Manuals Search And Download.

Taking pictures with [AUTO]

Creating panoramic images

(A mode)

1Press the shutter button to take the ﬁrst

frame.

2Move the camera slightly in the direction

of the second frame.

Set the shooting mode to A.

PANORAMA

AUTO

0.0

Target mark

AUTO

Pointer

SAVE

CANCEL

12M

Screen when combining images

from left to right

Press G to go to the submenu.

3Move the camera slowly while keeping it

straight, and stop the camera where the

pointer and target mark overlap.

Use HI to select the desired mode

and then press the A button to set.

● The camera releases the shutter

automatically.

Submenu 1

Application

Three frames are taken and

combined by the camera. The

user only composes the shots

so that the target marks and

pointers overlap, and the camera

automatically releases the shutter.

AUTO

Three frames are taken and

combined by the camera. The

user composes the shots using

the guide frame and manually

releases the shutter.

MANUAL

SAVE

CANCEL

To combine only two pictures, press the

A button before taking a third frame.

The frames that were taken are

combined into a panorama image

using the PC software (ib).

4Repeat Step 3to take a third frame.

For details on installing the PC software (ib),

see “Camera setup” (p. 11).

● After the third frame is taken, the camera

automatically processes the frames and the

combined panorama image is displayed.

When set to [AUTO] or [MANUAL], [IMAGE

SIZE] (p. 29) is ﬁxed to [2].

To exit the panorama function without

saving an image, press the m button.

The focus, exposure (p. 26), zoom position

(p. 15), and white balance (p. 27) are locked

at the ﬁrst frame.

If the shutter does not automatically release,

try [MANUAL] or [PC].

The ﬂash (p. 25) is ﬁxed to $(FLASH OFF)

mode.

22 EN

Download from Www.Somanuals.com. All Manuals Search And Download.

Taking pictures with [MANUAL]

Taking pictures with [PC]

1Use HI to specify at which edge the

1Use FGHI to select the direction that

next picture is to be connected.

the frames are combined.

2Press the shutter button to take the ﬁrst

frame, and then compose the second

shot.

MANUAL

Direction for

combining the

next frame

Before ﬁrst

shot

BACK

2Press the shutter button to take the ﬁrst

frame.

BACK

Joint areas

MANUAL

After ﬁrst

shot

SAVE

BACK

CANCEL

1st frame

3Compose the next shot so that joint area

1 overlaps joint area 2.

EXIT

● After the ﬁrst shot, the area shown in white

reappears on the side of the display opposite

the pan direction. Frame subsequent

photographs so that they overlap with the

image in the monitor.

MANUAL

3Repeat Step 2until the number of

desired frames is taken, and then press

the A button or m button when

ﬁnished.

SAVE

CANCEL

Composition of the 2nd frame

Panorama shooting is possible for up to

10 frames.

4Press the shutter button to take the next

shot.

Refer to the PC software (ib) help guide for

details on how to make panorama images.

To combine only two pictures, press the

A button before taking the third frame.

5Repeat Steps 3and 4to take a third

frame.

● After the third frame is taken, the camera

automatically processes the frames and the

combined panorama image is displayed.

To exit the panorama function without

saving an image, press the m button.

EN 23

Download from Www.Somanuals.com. All Manuals Search And Download.

Smoothing out skin tone and

texture (Q mode)

The camera identiﬁes a person’s face and gives

the skin a smooth, translucent look for taking

the picture.

Set the shooting mode to Q.

BEAUTY

0.0

AUTO

12M

Point the camera toward the

subject. Check the frame appearing

around the face detected by the

camera, and then press the shutter

button to take the picture.

● The unedited image and edited image are both

saved.

● If the image cannot be retouched, only the

unedited image is saved.

The frame may not appear or may take

some time to appear for some subjects. In

addition, this function may have no visible

effect on some subjects.

The [IMAGE SIZE] of the retouched image

is limited to [n] or lower.

24 EN

Download from Www.Somanuals.com. All Manuals Search And Download.

Using Shooting Functions

“Using the Menu” (p. 4)

Option

Description

The ﬂash ﬁres automatically in

low-light or backlight conditions.

Using the ﬂash

FLASH AUTO

REDEYE

The ﬂash functions can be selected to best

match the shooting conditions.

Pre-ﬂashes are emitted to reduce

the occurrence of red eye in your

photos.

Lift the ﬂash knob to ﬂip up the

built-in ﬂash.

The ﬂash ﬁres regardless of the

available light.

FILL IN

FLASH OFF

The ﬂash does not ﬁre.

Flash knob

Shooting closeups

(Macro shooting)

This function enables the camera to focus and

shoot subjects at close distances.

Select the macro option in the

shooting function menu.

The ﬂash settings cannot be adjusted with

the ﬂash closed.

To turn off the ﬂash

Press the ﬂash down back into the camera.

This sets to $(FLASH OFF) mode.

OFF

0.0

AUTO

Select the ﬂash option in the

ISO

AUTO

shooting function menu.

12M

FLASH AUTO

Use HI to select the setting

option, and press the A button to

set.

0.0

AUTO

ISO

AUTO

Option

Description

12M

OFF

Macro mode is deactivated.

This enables shooting as close as

15 cm/5.9 in.^*1(180 cm/70.8 in.^*2)

to the subject.

MACRO

Use HI to select the setting

option, and press the A button to

set.

This enables shooting as close as

1 cm/0.4 in. to the subject.

SUPER MACRO^*3

When the zoom is at the widest (W) position.

When the zoom is at the most telephoto (T) position.

The zoom is automatically ﬁxed.

The ﬂash (p. 25) and zoom (p. 15) cannot

be set when [a SUPER MACRO] is

selected.

EN 25

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the self-timer

Adjusting the brightness

(Exposure compensation)

After the shutter button is pressed all the way

down, the picture is taken after a short delay.

The standard brightness (appropriate exposure)

set by the camera based on the shooting mode

(except for M) can be adjusted brighter or

darker to obtain a desired shot.

Select the self-timer option in the

shooting function menu.

Select the exposure compensation

option in the shooting function

menu.

OFF

0.0

AUTO

ISO

0.0

AUTO

12M

0.3 0.0 0.3

AUTO

ISO

AUTO

Use HI to select the setting

option, and press the A button to

set.

Use HI to select the desired

brightness, and press the A button.

Option

Description

YOFF

The self-timer is deactivated.

The self-timer lamp turns on for

approx. 10 seconds, then blinks

for approx. 2 seconds, and then

the picture is taken.

Y12 SEC

The self-timer lamp blinks for

approx. 2 seconds, then the

picture is taken.

Y2 SEC

Self-timer shooting is automatically canceled

after one shot.

To cancel the self-timer after it starts

Press the m button.

26 EN

Download from Www.Somanuals.com. All Manuals Search And Download.

Adjusting to a natural color

scheme (White balance)

Selecting the ISO sensitivity

Abbreviation for the International

For more natural coloring, choose a white

balance option suited to the scene.

Organization for Standardization. ISO

standards specify the sensitivity for digital

cameras and ﬁlm, thus codes such as “ISO

100” are used to represent sensitivity.

Select the white balance option in

the shooting function menu.

In the ISO setting, although smaller values

result in less sensitivity, sharp images can

be taken under fully lit conditions. Larger

values result in higher sensitivity, and

images can be taken at fast shutter speeds

even under low light conditions. However,

high sensitivity introduces noise into the

resulting picture, which may give it a grainy

appearance.

WB AUTO

0.0

AUTO

ISO

AUTO

Select the ISO setting option in the

shooting function menu.

Use HI to select the setting

option, and press the A button to

set.

Option

Description

0.0

The camera automatically adjusts

the white balance according to the

shooting scene.

AUTO

ISO

1100

ISO

200

ISO

ISO 200

WB AUTO

400

1/400 F3.5

For shooting outdoors under a

clear sky.

For shooting outdoors under a

cloudy sky.

Use HI to select the setting

option, and press the A button to

For shooting under tungsten

lighting.

set.

For shooting under daylight

ﬂuorescent lighting (household

lighting, etc.)

Option

Description

The camera automatically adjusts

the sensitivity according to the

shooting scene.

ISO AUTO

For shooting under neutral

ﬂuorescent lighting (desk lamps,

etc.)

The camera uses a higher

sensitivity compared to

For shooting under white

ﬂuorescent lighting (ofﬁces, etc.)

HIGH ISO AUTO [ISO AUTO] to minimize blur

caused by a moving subject or by

camera shake.

The ISO sensitivity is ﬁxed to the

selected value.

Value

EN 27

Download from Www.Somanuals.com. All Manuals Search And Download.

Sequential shooting (Drive)

Pictures are taken sequentially while the shutter

button is held down.

Select the drive option in the

shooting function menu.

0.0

AUTO

ISO

AUTO

SEQUENTIAL

Option

Description

One frame is shot each time the

shutter button is pressed.

Take sequential shots using the

focus, brightness (exposure) and

white balance set in the ﬁrst frame.

j^*1

The camera takes sequential shots

at a faster speed than in [j].

The camera takes sequential shots

at approximately 11.8 frames/sec.

The camera takes sequential shots

at approximately 15.5 frames/sec.

The shooting speed varies depending on the

settings for “image quality” (p. 29).

When set to [j], the ﬂash (p.25) cannot

be set to [REDEYE]. In addition, when set

to [c], [d] or [B] the ﬂash is ﬁxed to

[FLASH OFF].

[IMAGE SIZE] is limited to [n] or lower

when set to [c] or [d], and to [2] or

lower when set to [B]. The ISO sensitivity

is ﬁxed at [ISO AUTO] in both cases.

Setting of recording sound when shooting

still images (R) is disabled when taking

sequential shots.

28 EN

Download from Www.Somanuals.com. All Manuals Search And Download.

For information on using the menus, see “Using the Menu” (p. 4).

Menus for Shooting Functions

The default settings of the function are highlighted in

Selecting the image quality for still images [IMAGE SIZE/COMPRESSION]

I (Shooting menu 1) X IMAGE SIZE/COMPRESSION

M s P A Q

Available shooting modes:P

Submenu 1

Submenu 2

12M (3968×2976)

8M (3264×2448)

5M (2560×1920)

3M (2048×1536)

2M (1600×1200)

1M (1280×960)

Application

Suitable for printing pictures over A3 (11×17 in.).

Suitable for printing pictures up to A3 (11×17 in.).

Suitable for printing pictures at A4 (8.5×11 in.).

Suitable for printing pictures up to A4 size (8.5×11 in.).

Suitable for printing pictures at A5 (5×7 in.).

Suitable for printing pictures at postcard size.

IMAGE SIZE

Suitable for viewing pictures on a TV or using pictures on emails and

web sites.

VGA (640×480)

Suitable for playing pictures on a widescreen TV and for printing on A3

or 11×17 in.

16:9G (3968×2232)

16:9F (1920×1080)

Suitable for playing pictures on a widescreen TV and for printing on A5

or 5×7 in.

FINE

Shooting at high quality.

COMPRESSION

NORMAL

Shooting at normal quality.

“Number of storable pictures (still images)/Remaining recording time (movies) in the internal memory

and SD/SDHC memory cards” (p. 58)

Selecting the image quality for movies [IMAGE SIZE/IMAGE QUALITY]

A (Movie menu) X IMAGE SIZE/IMAGE QUALITY

M s P A Q

Available shooting modes:P

Submenu 1

Submenu 2

720P

Application

IMAGE SIZE

VGA (640×480)

QVGA (320×240)

Select the image quality based on the image size and frame rate.

Select [FINE] to shoot with higher image quality.

IMAGE QUALITY FINE/NORMAL

“Number of storable pictures (still images)/Remaining recording time (movies) in the internal memory

and SD/SDHC memory cards” (p. 58)

When [IMAGE SIZE] is set to [QVGA], [IMAGE QUALITY] is ﬁxed to [FINE].

EN 29

Download from Www.Somanuals.com. All Manuals Search And Download.

To focus on a moving subject

continuously (AF Tracking)

Brightening the subject against

backlight [SHADOW ADJUST]

1Hold the camera to align the AF target

mark on the subject and press the

A button.

I (Shooting menu 1) X SHADOW ADJUST

M s P

Available shooting modes:P

Submenu 2

AUTO

A Q

2When the camera recognizes the subject,

the AF target mark automatically tracks

the subject movement to focus on it

continuously.

Application

The shadow adjustment effect is

applied when shooting against

backlight.

3To cancel the tracking, press the

A button.

OFF

The effect is not applied.

Shoot with automatic adjustment

to brighten an area that has

become darker.

Depending on the subjects or the shooting

conditions, the camera may be unable to

lock the focus or fail to track the subject

movement.

When set to [ON], [ESP/n] (p. 30) is

automatically ﬁxed to [ESP].

When the camera fails to track the subject

movement, the AF target mark changes to

red.

Selecting the focusing area [AF MODE]

I (Shooting menu 1) X AF MODE

When set to [ON], [ESP/n] (p. 30) is

automatically ﬁxed to [ESP].

M s P

Available shooting modes:P

A Q

Submenu 2

Application

Selecting the method for measuring

the brightness [ESP/n]

The camera focuses automatically.

(If a face is detected, it is shown

by a white frame^*1; when the

shutter button is pressed halfway

and the camera focuses, the

frame turns to green^*2. If no face is

detected, the camera chooses a

subject in the frame and focuses

automatically.)

I (Shooting menu 1) X ESP/n

Available shooting modes:P

M s P

FACE/iESP^*1

A Q

Submenu 2

Application

Shoots to obtain a balanced

brightness over the entire screen

(Meters the brightness at the

center and surrounding areas of

the screen separately).

ESP

The camera focuses on the

subject located within the AF

target mark.

SPOT

Shoots the subject at the center

during backlighting (Meters the

brightness at the center of the

screen).

The camera tracks the subject

movement automatically to focus

on it continuously.

5 (spot)

AF TRACKING

For some subjects, the frame may not appear or

may take some time to appear.

If the frame blinks in red, the camera cannot focus.

Try refocusing on the subject.

When set to [ESP], the center may

appear dark when shooting against strong

backlighting.

[5(spot)] can be selected when [SHADOW

ADJUST] is set to [OFF], or when [AF

MODE] is set to [SPOT].

30 EN

Download from Www.Somanuals.com. All Manuals Search And Download.

For information on using the menus, see “Using the Menu” (p. 4).

Shooting at higher magniﬁcations than

Recording sound when shooting still

optical zoom without reducing the

image quality [FINE ZOOM]

images [R]

J (Shooting menu 2) X R

I (Shooting menu 1) X FINE ZOOM

M s P

Available shooting modes:P

A Q

M s P

Available shooting modes:P

A Q

Submenu 2

OFF

Application

No sound is recorded.

Submenu 2

OFF

Application

Optical zoom is used to zoom in

for shooting.

The camera automatically starts

recording sound for approx.

4 seconds after a picture is taken.

This is useful for recording notes

or comments about the picture.

Optical zoom and image cropping

are combined to zoom in for

shooting. (Approx. 93x (max.))

When recording, aim the microphone (p. 6)

at the source of the sound you want to

record.

This function will not reduce the image

quality since it dose not convert the data

with fewer pixels into the data with larger

pixels.

Setting is disabled when taking sequential

shots.

When set to [ON], [IMAGE SIZE] is limited

to [4] or lower.

The setting is not available when [DIGITAL

ZOOM] is set to [ON].

Recording sound when shooting

movies [R]

[FINE ZOOM] is not available when

[a SUPER MACRO] (p. 25) is selected.

A (Movie menu) X R

M s P

Available shooting modes:P

A Q

Shooting at higher magniﬁcations than

optical zoom [DIGITAL ZOOM]

Submenu 2

OFF

Application

No sound is recorded.

Sound is recorded.

I (Shooting menu 1) X DIGITAL ZOOM

M s P

Available shooting modes:P

Submenu 2

OFF

A Q

When set to [ON], only the digital zoom can

be used during movie recording. To record

the movie with the optical zoom, set [R]

(movies) to [OFF].

Application

Only optical zoom is used to zoom

in for shooting.

Optical zoom and digital zoom

are combined to zoom in for

shooting.(Approx. 75x (max.))

The setting is not available when [FINE

ZOOM] is set to [ON].

[DIGITAL ZOOM] is not available when

[a SUPER MACRO] (p. 25) is selected.

EN 31

Download from Www.Somanuals.com. All Manuals Search And Download.

Reducing the blur caused by the

camera shake when shooting

[IMAGE STABILIZER] (still images)/

[IS MOVIE MODE] (movies)

Using the AF illuminator to focus on a

shadowy subject [AF ILLUMINAT.]

J (Shooting menu 2) X AF ILLUMINAT.

M s P

Available shooting modes:P

A Q

J (Shooting menu 2) X

IMAGE STABILIZER (still images)/

A (Movie menu) X

Submenu 2

OFF

Application

The AF illuminator is not used.

IS MOVIE MODE (movies)

When the shutter button is pressed

halfway down, the AF illuminator

turns on to aid focusing.

M s P

Available shooting modes:P

A Q

Submenu 2

Application

The image stabilizer is

AF illuminator

deactivated. This is recommended

for shooting when the camera is

ﬁxed in place on a tripod or other

stable surface.

OFF

The image stabilizer is activated.

Displaying icon guides [ICON GUIDE]

The camera’s default settings are [IMAGE

STABILIZER] (still images) to [ON] and [IS

MOVIE MODE] (movies) to [OFF].

J (Shooting menu 2) X ICON GUIDE

M s P

Available shooting modes:P

There may be a noise coming from inside

the camera when the shutter button is

pressed with [IMAGE STABILIZER] (still

images) set to [ON].

A Q

Submenu 2

OFF

Application

No icon guide is displayed.

The explanation of the selected

icon will be displayed when

a shooting mode or shooting

function menu icon is selected

(position the cursor on the icon for

a while to display the explanation).

Images may not be stabilized if camera

shake is too severe.

When the shutter speed is extremely slow,

such as when taking pictures at night,

[IMAGE STABILIZER] (still images) may not

be as effective.

When shooting while the [IS MOVIE MODE]

(movies) is set to [ON], the image will be

enlarged somewhat before saving.

PROGRAM AUTO

Functions can be changed

manually.

Icon guide

0.0

Shooting pictures while keeping the

subject in focus [FULLTIME AF]

AUTO

ISO

AUTO

A (Movie menu) X FULLTIME AF

12M

M s P

Available shooting modes:P

A Q

Submenu 2

OFF

Application

Pressing the shutter button

halfway down brings the subject

into focus and locks the focus.

Fulltime AF keeps the subject in

focus, without having to press the

shutter button down halfway. This

reduces focusing time.

32 EN

Download from Www.Somanuals.com. All Manuals Search And Download.

For information on using the menus, see “Using the Menu” (p. 4).

Menus for Playback, Editing, and

Printing Functions

The menu descriptions shall begin with the playback function menu. The default settings of the

function are highlighted in

Data must have been created with the PC software (ib) before using some function.

Refer to the PC software (ib) help guide for details on how to use the PC software (ib).

For details on installing the PC software (ib), see “Camera setup” (p. 11).

Playing back pictures automatically

[SLIDESHOW]

Searching for images and playing back

the related images [PHOTO SURFING]

SLIDESHOW

PHOTO SURFING

In [PHOTO SURFING], images can be

searched and related images can be played

back by selecting the related items.

Submenu 1 Submenu 2

Application

Selects the content

to be included in the

slideshow.

ALL/EVENT/

SLIDE

COLLECTION^*1

To start [PHOTO SURFING]

Press the A button to start

OFF/

Cosmic/

Breeze/

Mellow/

Dreamy/

Urban

[PHOTO SURFING].

Selects the

background music

options.

When a related item of the image displayed

is selected with FG, images related to the

item are displayed in the lower part of the

monitor. Use HI to display an image.

To select the related items undisplayed,

press the A button when selecting an item.

To stop [PHOTO SURFING], press the

m button, or select [BACK] and press

the A button.

BGM

STANDARD/ Selects the type of

FADE/

ZOOM

TYPE

transition effect used

between slides.

START

―

Starts the slideshow.

[COLLECTION] can be selected only when My

Cinema created with the PC software (ib) has been

imported back into the camera. Refer to the PC

software (ib) help guide for details on how to make

[COLLECTION].

BACK

2010/

02/26

related items.

ALL

―

Makes skin look

smooth and

translucent. Select the

correction effect from

3 levels.

[EVENT q]

Images can be played back by event created

with the PC software (ib).

SOFT/AVG/

HARD

CLEAR SKIN

Enhances the contrast

of the eyes.

SPARKLE EYE

―

Event index (p. 18)

The representative images for an event

created with the PC software (ib) can be

displayed.

DRAMATIC

EYE

Enlarges the subject’s

eyes.

1Use FG to select a correction item, and

press the A button.

2Use HI to select an image for

retouching, and press the A button.

● The retouched image is saved as a separate

image.

When [CLEAR SKIN] is selected

Use FG to select the retouching level, and

press the A button.

CLEAR SKIN

SOFT

AVG

HARD

SET

BACK

EN 35

Download from Www.Somanuals.com. All Manuals Search And Download.

Changing the color tone of image

[COLOR EDIT]

Changing the image size [Q]

EDIT X Q

EDIT X COLOR EDIT

Submenu 2

Application

Submenu 2

Application

This saves a high-resolution image

as a separate image with a smaller

size for use in e-mail attachments

and other applications.

C640 × 480

This changes the image to black

and white.

BLACK & WHITE

E320 × 240

This changes the image to a

sepia tone.

SEPIA

1Use HI to select an image.

HIGH

SATURATION

This increases the color saturation

of the image.

2Use FG to select an image size and

press the A button.

LOW

SATURATION

This slightly increases the color

saturation of the image.

● The resized image is saved as a separate

image.

COLOR EDIT

SEPIA

Cropping image [P]

EDIT X P

1Use HI to select an image, and press

the A button.

2Use the zoom lever to select the size of

the cropping frame, and use FGHI to

move the frame.

SET

EXIT

1Use HI to select an image, and press

the A button.

2Use HI to select the desired color, and

press the A button.

● The image with the selected color is saved as

a separate image.

Cropping frame

Adding a calendar to an image

[CALENDAR]

SET

3Press the A button after you have

selected the area to trim.

EDIT X CALENDAR

● The edited image is saved as a separate

image.

CALENDAR

SET

36 EN

Download from Www.Somanuals.com. All Manuals Search And Download.

For information on using the menus, see “Using the Menu” (p. 4).

1Use HI to select an image, and press

the A button.

Erasing images [ERASE]

ERASE

2Use HI to select a calendar. Use FG

to select the image orientation, and then

press the A button.

Submenu 1

Application

All images in the internal memory

or card will be erased.

ALL ERASE

3Use FG to select the Year of the

calendar, and press I.

Images are individually selected

and erased.

SEL. IMAGE

4Use FG to select the Month of the

ERASE/

Deletes the image displayed.

calendar, and press the A button.

ERASE EVENT^*1

● The edited image is saved as a separate

image.

CANCEL

Cancels deletion of the image.

If G is pressed when an event is played back, all

images in the event are erased.

Brightening areas that are dark

due to backlight or other reasons

[SHADOW ADJ]

When erasing pictures in the internal

memory, do not insert the card into the

camera. Or set [INTERNAL/SD] to [IN].

“Selecting a storage device [INTERNAL/

SD]” (p. 39)

EDIT X SHADOW ADJ

1Use HI to select an image, and press

Before erasing pictures from a memory

card, insert the card into the camera and

select [AUTO] for [INTERNAL/SD].

“Selecting a storage device [INTERNAL/

SD]” (p. 39)

the A button.

● The edited image is saved as a separate

image.

Depending on the picture, the editing may

not be effective.

Protected images cannot be erased.

The retouching process may lower the

image resolution.

To individually select and erase

images [SEL. IMAGE]

Retouching red eyes in ﬂash shooting

1Use FG to select [SEL. IMAGE], and

[REDEYE FIX]

press the A button.

2Use HI to select the image to be

erased, and press the A button to add a

R mark to the image.

EDIT X REDEYE FIX

1Use HI to select an image, and press

the A button.

● Turn the zoom lever to the W end to display

an index view. Images can be quickly selected

using the FGHI buttons. Turn to the T

end to return to the single frame display.

● The edited image is saved as a separate

image.

Depending on the picture, the editing may

not be effective.

SEL. IMAGE

The retouching process may lower the

image resolution.

R mark

ERASE/CANCEL

3Repeat Step 2to select the images to be

erased, and then press the m button

to erase the selected images.

4Use FG to select [YES], and press the

A button.

● The images with a R mark are erased.

EN 37

Download from Www.Somanuals.com. All Manuals Search And Download.

To erase all images [ALL ERASE]

Adding sound to still images [R]

1Use FG to select [ALL ERASE], and

press the A button.

2Use FG to select [YES], and press the

q(Playback menu) X R

1Use HI to select an image.

2Aim the microphone toward the sound

source.

A button.

Microphone

Saving print settings to the image data

[PRINT ORDER]

q(Playback menu) X PRINT ORDER

“Print Reservations (DPOF)” (p. 49)

Print reservation can be set only for still

images that are recorded to the card. Set

[INTERNAL/SD] to [AUTO].

Protecting images [0]

q(Playback menu) X 0

3Press the A button.

● Recording starts.

Protected images cannot be erased by

[ERASE] (p. 17, 37), [ALL ERASE] (p. 37),

[SEL. IMAGE] (p. 37) or [ERASE EVENT]

(p. 37), but all images are erased by

● The camera adds (records) sound for approx.

4 seconds while playing back the image.

[MEMORY FORMAT]/[FORMAT] (p. 39).

1Use HI to select an image.

2Press the A button.

● Press the A button again to cancel the

settings.

3If necessary, repeat Steps 1and 2

to protect other images, and press the

m button.

Rotating images [y]

q(Playback menu) X y

1Use HI to select an image.

2Press the A button to rotate the image.

3If necessary, repeat Steps 1and 2to

make settings for other images, and press

the m button.

The new picture orientations will be saved

even after the power is turned off.

38 EN

Download from Www.Somanuals.com. All Manuals Search And Download.

For information on using the menus, see “Using the Menu” (p. 4).

Menus for Other Camera Settings

The default settings of the function are highlighted in

Selecting a storage device

[INTERNAL/SD]

Restoring data in the camera

[DATA REPAIR]

r (Settings 1) X INTERNAL/SD

r (Settings 1) X DATA REPAIR

Playback will become available by

performing [DATA REPAIR] when images

never appear on the monitor after qbutton

is pressed. However, data such as

collections and other groups created with

the PC software (ib) is deleted from the

database in the camera.

Submenu 2

Application

If a card is inserted, the card is

automatically selected. If no card

is inserted, internal memory is

used.

AUTO

IN^*1

Internal memory is selected.

Import the data back into the camera from a

computer to playback the data created with

the PC software (ib).

Internal memory is used even if a card is inserted.

Erasing data completely

[MEMORY FORMAT]/[FORMAT]

Copying images in the internal memory

r (Settings 1) X MEMORY FORMAT/

to the card [u COPY]

FORMAT

r (Settings 1) X u COPY

Before formatting, check that no important

data is left in the internal memory or card.

To copy images in the internal memory

to the card

Use HI to select an image, and press the

If the internal memory is formatted, the

camera instruction manual and the PC

software (ib) data that are stored on the

internal memory are erased. If necessary,

store the backup before formatting.

A button.

Changing the display language [D]

r (Settings 1) X D

Cards must be formatted with this camera

before ﬁrst use or after being used with

other cameras or computers.

“Changing the display language” (p. 13)

Submenu 2

YES^*1

Application

Submenu 2

Application

Completely erases the image data

in the internal memory or card

(including protected images).

The language for the menus and

error messages displayed on the

monitor is selected.

Languages

Cancels formatting.

If [AUTO] is selected for [INTERNAL/SD] and a card

is inserted, the card will be formatted. If no card is

inserted, internal memory will be formatted.

If [IN] is selected for [INTERNAL/SD], internal

memory will be formatted whether a card is inserted

or not.

EN 39

Download from Www.Somanuals.com. All Manuals Search And Download.

Restoring the shooting functions to the

default settings [RESET]

Turning on the camera with the q

button [qPOWER ON]

r (Settings 1) X RESET

s (Settings 2) X qPOWER ON

Submenu 2

Application

Submenu 2

YES

Application

Restores the following menu

functions to the default settings.

• Flash (p. 25)

• Macro (p. 25)

• Self-timer (p. 26)

• Exposure compensation (p. 26)

• White balance (p. 27)

• ISO (p. 27)

Pressing the qbutton turns on

the camera and starts the camera

in the playback mode.

The camera is not turned on. To

turn on the camera, press the

n button.

YES

• Drive (p. 28)

• Menu functions in [

Saving the mode when the camera is

turned off [SAVE SETTINGS]

] (p. 29 to 32)

The current settings will not be

changed.

s (Settings 2) X SAVE SETTINGS

Submenu 2

Application

Selecting a method for connecting

the camera to other devices

[USB CONNECTION]

The shooting mode is saved

when the camera is turned off and

is reactivated the next time the

camera is turned on.

YES

r (Settings 1) X USB CONNECTION

The shooting mode is set to P

mode when the camera is turned

on.

Submenu 2

AUTO

Application

When the camera is connected

to another device, the settings

selection screen is displayed.

Choosing the opening screen display

[PW ON SETUP]

Select when connecting the

camera to a computer via a

storage device.

STORAGE

s (Settings 2) X PW ON SETUP

Select when connecting a camera

and computer.

Submenu 2

OFF

Application

No opening screen is displayed.

Select when connecting to a

PictBridge-compatible printer.

The opening screen is displayed

when the camera is turned on.

System requirements

Windows

Windows 2000 Professional/

XP Home Edition/

XP Professional/Vista/

Windows 7

Macintosh : Mac OS X v10.3 or later

Even if a computer has USB ports, proper

operation is not guaranteed in the following

cases:

● Computers with USB ports installed using an

expansion card, etc.

● Computers without a factory-installed OS and

home-built computers

40 EN

Download from Www.Somanuals.com. All Manuals Search And Download.

For information on using the menus, see “Using the Menu” (p. 4).

Selecting the camera sound and its volume [SOUND SETTINGS]

s (Settings 2) X SOUND SETTINGS

Submenu 2

Submenu 3

Submenu 4

Application

Select [ON] to disable camera sounds

(operation sounds, shutter sound, and

warning sounds) and mute sound during

playback.

SILENT MODE^{*1, 2}

OFF/ON

—

SOUND TYPE

VOLUME

1/2/3

Selects the operating sound and volume

of the camera buttons (except the shutter

button).

BEEP

OFF (No Sound)/

LOW/HIGH

SOUND TYPE

VOLUME

1/2/3

Selects the type and volume of the shutter

sound.

SHUTTER SOUND

OFF (No Sound)/

LOW/HIGH

OFF (No Sound)/

LOW/HIGH

—

Selects the warning sound volume.

Selects the image playback volume.

OFF (No Sound) or

5 levels of volume

qVOLUME

Even when [SILENT MODE] is [ON], FG can be used to adjust volume during playback.

Even when [SILENT MODE] is [ON], sound is played when images are displayed on a television.

Resetting the ﬁle names of pictures

Submenu 2

Application

[FILE NAME]

This resets the sequential number

for the folder name and ﬁle name

whenever a new card is inserted.^*1

This is useful when grouping

images on separate cards.

s (Settings 2) X FILE NAME

RESET

Folder name

DCIM

Folder name

100OLYMP

File name

Pmdd0001.jpg

Even when a new card is inserted,

this continues the numbering for

the folder name and ﬁle name from

the previous card. This is useful for

managing all image folder names

and ﬁles names with sequential

numbers.

AUTO

999OLYMP

Pmdd9999.jpg

The number for the folder name is reset to 100, and

the one for the ﬁle name is reset to 0001.

Automatic

numbering

Automatic

numbering

Month: 1 to C

(A=October,

B=November,

C=December)

Pmdd

Day: 01 to 31

EN 41

Download from Www.Somanuals.com. All Manuals Search And Download.

Adjusting the CCD and the image

processing function [PIXEL MAPPING]

Setting the date and time [X]

t (Settings 3) X X

s (Settings 2) X PIXEL MAPPING

“Setting the date, time and time zone”

(p. 12)

This function has already been adjusted

at factory shipping, and no adjustment is

needed right after purchase. Approximately

once a year is recommended.

To select the date display order

1Press I after setting Minute, and use

FG to select the date display order.

For best results, wait at least one minute

after taking or viewing pictures before

performing pixel mapping. If the camera is

turned off during pixel mapping, be sure to

perform it again.

TIME

Y/M/D

2010.02.26 12:30

To adjust the CCD and the image

processing function

Date order

Press the A button when [START]

(Submenu 2) is displayed.

SET

CANCEL

● The camera checks and adjusts the CCD and the

image processing function at the same time.

Adjusting the brightness of the monitor

[s]

s (Settings 2) X s

To adjust the monitor brightness

1Use FG to adjust the brightness while

viewing the screen, and then press the

A button.

SET

BACK

42 EN

Download from Www.Somanuals.com. All Manuals Search And Download.

For information on using the menus, see “Using the Menu” (p. 4).

Choosing home and alternate time zones [WORLD TIME]

t (Settings 3) X WORLD TIME

You will not be able to select a time zone using [WORLD TIME] if the camera clock has not ﬁrst been

set using [X].

Submenu 2

Submenu 3

Application

The time in the home time zone (the time zone selected for x in

submenu 2).

HOME/ALTERNATE

The time in the travel destination time zone (the time zone selected

for y in submenu 2).

x^*1

y^{*1, 2}

—

Select the home time zone (x).

Select the travel destination time zone (y).

In areas where daylight saving time is in effect, use FG to turn daylight saving time ([SUMMER]) on.

When you select a time zone, the camera automatically calculates the time difference between the selected

zone and the home time zone (x) to display the time in the travel destination time zone (y).

Playing back images on a TV [TV OUT]

t (Settings 3) X TV OUT

The TV video signal system varies depending on the countries and regions. Before viewing camera

images on your TV, select the video output according to your TV’s video signal type.

Submenu 2

Submenu 3

NTSC

Application

Connecting the camera to a TV in North America, Taiwan, Korea,

Japan, and so on.

VIDEO OUT

Connecting the camera to a TV in European countries, China, and

so on.

PAL

HDMI OUT

Set the playback format.

480p/720p/1080i

Operate with the camera.

OFF

HDMI CONTROL

Operate with the TV remote control.

The factory default settings differ according to the region where the camera is sold.

EN 43

Download from Www.Somanuals.com. All Manuals Search And Download.

To play back camera images on a TV

● Connection via AV cable

1Use the camera to select the same video signal system as the one of connected TV

([NTSC]/[PAL]).

2Connect the TV and camera.

Open the connector cover

in the direction of the arrow.

Connect to the TV video

input jack (yellow) and

audio input jack (white).

Multi-connector

AV cable (supplied)

● Connection via HDMI cable

1On the camera, select the digital signal format that will be connected ([480p]/[720p]/[1080i]).

2Connect the TV and camera.

When set to [1080i], 1080i format takes priority for HDMI output. However, if this setting does not

match the input setting of the TV, the signal format is changed ﬁrst to 720p and then to 480p. For

details on changing the input setting of the TV, refer to the TV’s instruction manual.

When the camera is connected to the computer or the like by the USB cable, do not connect the

HDMI cable to the camera.

Open the connector cover

in the direction of the arrow.

HDMI micro

connector

Connect to the HDMI

connector on the TV.

HDMI cable (type D/sold separately: CB-HD1)

3Turn on the TV, and change “INPUT” to “VIDEO (an input jack connected to the camera).”

4Turn on the camera, and use HI to select the image for playback.

For details on changing the input source of the TV, refer to the TV’s instruction manual.

Use an HDMI cable that matches the HDMI micro connector on the camera and the HDMI connector on

the TV.

When the camera and TV are connected by both an AV cable and an HDMI cable, the HDMI cable

will take priority.

Depending on the TV’s settings, the displayed images and information may become cropped.

44 EN

Download from Www.Somanuals.com. All Manuals Search And Download.

For information on using the menus, see “Using the Menu” (p. 4).

To operate images with the TV remote

control

Viewing the image immediately after

shooting [REC VIEW]

t (Settings 3) X REC VIEW

1Set [HDMI CONTROL] to [ON], and turn

off the camera.

Submenu 2

Application

2Connect the camera and TV with an

HDMI cable. “Connection via HDMI cable”

(p. 44)

The image being recorded is not

displayed. This allows the user

to prepare for the next shot while

following the subject in the monitor

after shooting.

OFF

3First turn on the TV, and then turn on the

camera.

● Operate by following the operation guide that

The image being recorded is

displayed. This allows the user to

make a brief check of the image

that was just taken.

is displayed on the TV.

With some TVs, operations cannot be

performed with the TV remote control even

though the operation guide is displayed on

the screen.

Even when set to [ON], you can resume

shooting while the image is being displayed.

If operations cannot be performed with the

TV remote control, set [HDMI CONTROL] to

[OFF] and operate using the camera.

Automatically rotating images shot

with the camera in a vertical position

during playback [PIC ORIENTATION]

Saving battery power between shots

[POWER SAVE]

t (Settings 3) X PIC ORIENTATION

t (Settings 3) X POWER SAVE

During shooting, the [y] (p. 38) setting on

the playback menu is set automatically.

Submenu 2

OFF

Application

This function may not work properly if

the camera is facing up or down during

shooting.

Cancels [POWER SAVE].

When the camera is not being

used for approx. 10 seconds, the

monitor automatically turns off to

save battery power.

Submenu 2

Application

Information about the vertical/

horizontal orientation of the

camera during shooting is not

recorded with images. Images

shot with the camera in a vertical

position are not rotated during

playback.

To resume standby mode

Press any button.

OFF

Information about the vertical/

horizontal orientation of the

camera during shooting is

recorded with images. Images

are automatically rotated during

playback.

EN 45

Download from Www.Somanuals.com. All Manuals Search And Download.

Printing

Direct printing (PictBridge^*1)

Turn on the printer, and then

connect the printer and camera.

By connecting the camera to a PictBridge-

compatible printer, you can print images directly

without using a computer.

Open the connector cover

in the direction of the arrow.

To ﬁnd out if your printer supports PictBridge,

refer to the printer’s instruction manual.

Multi-connector

PictBridge is a standard for connecting digital

cameras and printers of different makers and

printing out pictures directly.

USB cable

(supplied)

The printing modes, paper sizes, and other

parameters that can be set with the camera

vary depending on the printer that is used.

For details, refer to the printer’s instruction

manual.

For details on the available paper types,

loading paper, and installing ink cassettes,

refer to the printer’s instruction manual.

Printing images at the

printer’s standard settings

[EASY PRINT]

EASYPRINT START

CUSTOM PRINT OK

In the [SETUP] menu, set [USB

CONNECTION] to [PRINT]. “Using the

Menu” (p. 4)

Display the image to be printed on

the monitor.

Press I to start printing.

“Viewing images” (p. 16)

To print another image, use HI

to select an image, and press the

A button.

To exit printing

After a selected image is displayed on the

screen, disconnect the USB cable from the

camera and printer.

EXIT

46 EN

Download from Www.Somanuals.com. All Manuals Search And Download.

Changing the printer’s settings

for printing [CUSTOM PRINT]

Use FG to select the

[BORDERLESS] or [PICS/SHEET]

settings, and press the A button.

Follow Steps 1 and 2 for [EASY

PRINT] (p. 46).

Submenu 4

(BORDERLESS

Application

or PICS/SHEET)

Press the A button.

The image is printed with a border

around it ([OFF]).

The image is printed to ﬁll the

entire paper ([ON]).

OFF/ON^*1

Use FG to select the print mode,

and press the A button.

(The number of The number of images per sheet

images per sheet ([PICS/SHEET]) is selectable only

varies depending when [MULTI PRINT] is selected

PRINT MODE SELECT

on the printer.)

in Step 3.

ALL PRINT

MULTI PRINT

ALL INDEX

PRINT ORDER

The available settings for [BORDERLESS] vary

depending on the printer.

If [STANDARD] is selected in Steps 4 and 5,

the image is printed at the printer’s standard

settings.

SET

EXIT

4/30

Submenu 2

Application

This prints the image selected in

Step 6.

12M

N^ORM

This prints all images stored in the

internal memory or card.

ALL PRINT

MULTI PRINT

FILE

100 0004

’10/02/26 12:30

This prints one image in a multiple

layout format.

SINGLE PRINT

This prints an index of all images

stored in the internal memory

or card.

ALL INDEX

Use HI to select an image.

This prints images based on the

print reservation data on the card.

PRINT ORDER^*1

Press F to make a print reservation

for the current image. Press G to

make the detailed printer settings

for the current image.

[PRINT ORDER] is available only when print

reservations have been made. “Print Reservations

(DPOF)” (p. 49)

Use FG to select [SIZE] (Submenu

3), and press I.

To make the detailed printer settings

1Use FGHI to select the setting, and

If the [PRINTPAPER] screen is not

displayed, the [SIZE], [BORDERLESS],

and [PICS/SHEET] are set to the printer’s

standard.

press the A button.

PRINT INFO

PRINTPAPER

DATE

FILE NAME

WITHOUT

SIZE

BORDERLESS

STANDARD

EXIT

SET

BACK

EN 47

Download from Www.Somanuals.com. All Manuals Search And Download.

Submenu Submenu

Press the A button.

Application

This selects the number

of prints.

<×

0 to 10

Selecting [WITH] prints the

images with the date.

Selecting [WITHOUT]

prints the images without

the date.

WITH/

WITHOUT

CANCEL

DATE

Selecting [WITH] prints the

ﬁle name on the image.

Selecting [WITHOUT] does

not print any ﬁle name on

the image.

SET

BACK

WITH/

WITHOUT

FILE NAME

Use FG to select [PRINT], and

press the A button.

● Printing starts.

(Proceeds

to the

setting

This selects a portion of

the image for printing.

● When [OPTION SET] is selected in [ALL PRINT]

mode, [PRINT INFO] screen is displayed.

screen.)

● When printing is ﬁnished, the [PRINT MODE

SELECT] screen is displayed.

To crop an image [P]

1Use the zoom lever to select the size

of the cropping frame, use FGHI

to move the frame, and then press the

A button.

PRINT MODE SELECT

ALL PRINT

MULTI PRINT

ALL INDEX

PRINT ORDER

SET

EXIT

Cropping frame

To cancel printing

1Press the m button while

SET

[DO NOT REMOVE USB CABLE] is

displayed.

2Use FG to select [OK], and press the

A button.

2Select [CANCEL] using FG and then

press the A button.

DO NOT REMOVE USB CABLE

CANCEL

SET

BACK

CONTINUE

CANCEL

If necessary, repeat Steps 6 and 7

to select the image to be printed,

SET

make the detailed settings, and set

[SINGLEPRINT].

48 EN

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the m button.

Use FG to select [<], and press

the A button.

When the message [REMOVE USB

CABLE] is displayed, disconnect

the USB cable from the camera and

printer.

4/30

12M

N^ORM

Print Reservations (DPOF^*1)

FILE

100 0004

’10/02/26 12:30

SET

In print reservations, the number of prints and

date imprint option are saved in the image on

the card. This enables easy printing at a printer

or print shop supporting DPOF by using only the

print reservations on the card without a computer

or a camera.

Use HI to select the image for

print reservation. Use FG to select

the quantity. Press the A button.

DPOF is a standard for storing automatic printout

information from digital cameras.

Print reservations can be set only for the

images stored on the card. Insert a card

with recorded images before making print

reservations.

DATE

TIME

DPOF reservations set by another DPOF

device cannot be changed by this camera.

Make changes using the original device.

Making new DPOF reservations with this

camera will erase the reservations made by

the other device.

SET

BACK

Use FG to select the [X] (date

print) screen option, and press the

DPOF print reservations can be made for up

to 999 images per card.

A button.

Submenu 2

Application

This prints the image only.

Single-frame print

This prints the image with the

shooting date.

reservations [<]

DATE

This prints the image with the

shooting time.

TIME

Display the [SETUP] menu.

“Using the Menu” (p. 4)

PRINT ORDER

From the playback menu q, select

[PRINT ORDER] and then press the

(

)

A button.

SET

PRINT ORDER

CANCEL

SET

BACK

Use FG to select [SET], and press

the A button.

SET

EXIT

EN 49

Download from Www.Somanuals.com. All Manuals Search And Download.

Reserving one print each of all

Resetting the print reservation

data for selected images

images on the card [U]

Follow Steps 1 and 2 in [<] (p. 49).

Use FG to select [U], and press

Use FG to select [<], and press

the A button.

Follow Steps 5 and 6 in [<].

Use FG to select [KEEP] and

press the A button.

Resetting all print reservation

data

Use HI to select the image with

the print reservation you want to

cancel. Use FG to set the print

quantity to “0”.

Follow Steps 1 and 2 in [<] (p. 49).

Select either [<] or [U], and press

If necessary, repeat Step 4, and then

press the A button when ﬁnished.

the A button.

PRINT ORDER SETTING

PRINT ORDERED

Use FG to select the [X] (date

print) screen option, and press the

A button.

● The settings are applied to the remaining images

with the print reservation data.

RESET

KEEP

SET

BACK

Use FG to select [SET], and press

the A button.

Use FG to select [RESET], and

press the A button.

50 EN

Download from Www.Somanuals.com. All Manuals Search And Download.

Usage Tips

If the camera does not work as intended, or if

an error message is displayed on the screen,

and you are unsure of what to do, refer to the

information below to ﬁx the problem(s).

Monitor

“Difﬁcult to see”.

● Condensation^*1may have occurred. Turn off the

power, and wait for the camera body to become

acclimated to the surrounding temperature and dry

out before taking pictures.

Troubleshooting

Dew drops can form in the camera when it is

suddenly taken from a cold location into a warm,

humid room.

Battery

“The camera does not work even when

batteries are installed”.

“Vertical lines appear on the screen”.

● This condition may occur when the camera is

pointed at an extremely bright subject under a

clear sky and so on. The lines do not appear,

however, in the ﬁnal image.

● Insert new or recharged batteries in the correct

direction.

“Inserting the battery” (p. 10)

● Battery performance may have been reduced

temporarily due to low temperature. Take the

batteries out of the camera, and warm them by

putting them in your pocket for a while.

“The light is caught in the picture”.

● Shooting with ﬂash in dark situations results in

an image with many ﬂash reﬂections on dust in

the air.

Card/Internal memory

“An error message is displayed”.

“Error message” (p. 52)

Date and time function

“Date and time settings return to the

default setting”.

● If the batteries are removed and left out of the

camera for about 3 days^*2, the date and time

settings return to the default setting, and must

be reset.

Shutter button

“No picture is taken when the shutter

button is pressed”.

The time until the date and time settings return

to the default setting varies depending on how

long the batteries have been loaded.

● Cancel sleep mode.

To save battery power, the camera automatically

goes into sleep mode and the monitor turns off

if there is no operation for 3 minutes when the

camera is turned on. No picture is taken even if

the shutter button is fully pressed in this mode.

Operate the zoom lever or other buttons to restore

the camera from sleep mode before taking a

picture. If the camera is left for another 12 minutes,

it automatically turns off. Press the n button

to turn the camera on.

“Setting the date, time and time zone” (p. 12)

Miscellaneous

“The camera makes a noise when taking

pictures”.

● The camera may activate the lens and make a

noise even if no operation is performed. This

is because the camera automatically performs

actions of auto focus as far as it is ready to shoot.

● Press the qbutton to switch to the shooting

mode.

● Wait until #(ﬂash charge) stops blinking before

taking pictures.

● With prolonged camera use, the internal

temperature may increase, resulting in automatic

shutdown. If this occurs, remove the battery

from the camera and wait until the camera

has sufﬁciently cooled. The camera’s external

temperature may also increase during use,

however this is normal and does not indicate

malfunction.

EN 51

Download from Www.Somanuals.com. All Manuals Search And Download.

Error message

NO INK

Corrective action

Printer problem

When one of the messages below is

displayed on the monitor, check the

corrective action.

Reﬁll the ink in the printer.

Printer problem

Remove the jammed paper.

Error message

Corrective action

JAMMED

Card problem

Insert a new card.

Printer problem

Return to the status where the

printer can be used.

SETTINGS

CHANGED^*3

CARD ERROR

Card problem

Printer problem

The card write-protect switch is

set to the “LOCK” side. Release

the switch.

Turn off the camera and printer,

check the printer for any

problems, and then turn the

power on again.

WRITE

PROTECT

PRINT ERROR

Internal memory problem

• Insert a card.

• Erase unwanted images.^*1

Problem with selected image

MEMORY FULL

Use a computer to print.

CANNOT PRINT^*4

Card problem

• Replace the card.

• Erase unwanted images.^*1

CARD FULL

Before erasing important images, download them to

a computer.

All data will be erased.

This is displayed, for instance, when the printer’s

paper tray has been removed. Do not operate

the printer while making the print settings on the

camera.

This camera may be unable to print images taken by

other cameras.

CARD SETUP

Card problem

Use FG to select [FORMAT],

and press the A button. Next,

use FG to select [YES], and

press the A button.^*2

POWER OFF

FORMAT

SET

Internal memory problem

Use FG to select [MEMORY

FORMAT], and press the

A button. Next, use FG to

select [YES], and press the

A button.^*2

MEMORY SETUP

POWER OFF

MEMORY FORMAT

SET

Internal memory/Card problem

Take pictures before viewing

them.

NO PICTURE

Problem with selected image

Use photo retouch software,

etc. to view the image on a

computer. If the image still

cannot be viewed, the image ﬁle

is corrupted.

PICTURE

ERROR

Problem with selected image

Use photo retouch software, etc.

to edit the image on a computer.

THE IMAGE

CANNOT

BE EDITED

Battery problem

• Insert new batteries.

• If using rechargeable batteries,

charge the batteries.

BATTERY

EMPTY

Connection problem

Connect the camera and

computer or printer correctly.

CONNECTION

Printer problem

Load paper into the printer.

NO PAPER

52 EN

Download from Www.Somanuals.com. All Manuals Search And Download.

Shooting tips

When you are unsure of how to take a picture

that you envision, refer to the information below.

Fast-moving object

Focusing

“Focusing on the subject”

The subject is not in the center

of the frame

● Taking a picture of a subject not in the center

of the screen

After focusing on an object at the same distance

as the subject, compose the shot, and take the

picture.

Camera shake

Pressing the shutter button halfway (p. 14)

● Set [AF MODE] (p. 30) to [FACE/iESP]

“Taking pictures without camera shake”

● Taking a picture in [AF TRACKING] mode

(p. 30)

● Taking pictures using [IMAGE STABILIZER]

(p. 32)

The camera tracks the subject movement

automatically to focus on it continuously.

When a picture is taken of a shadowy subject, the

CCD^*1shifts to correct for camera shake even if

the ISO speed is not increased. This function is

also effective when taking pictures at a high zoom

magniﬁcation.

● Taking a picture of a shadowy subject

Using the AF illuminator makes focusing easier.

[AF ILLUMINAT.] (p. 32)

A device that takes light received through the

lens and converts it into electric signals.

● Taking a picture of subjects where autofocus

is difﬁcult

● Shooting movies using [IS MOVIE MODE]

(p. 32)

In the following cases, after focusing on an object

(by pressing the shutter button halfway down) with

high contrast at the same distance as the subject,

compose the shot, and take the picture.

● Select C (SPORT) in the scene mode (p. 20)

The C (SPORT) mode uses a fast shutter speed

and can reduce the blur incurred by a moving

subject.

● Taking pictures at a high ISO sensitivity

Subjects with low contrast

If a high ISO sensitivity is selected, pictures can

be taken at a high shutter speed even at locations

where a ﬂash cannot be used.

“Selecting the ISO sensitivity” (p. 27)

When extremely bright objects

appear in the center of the

screen

Object with no vertical lines^*1

It is also effective to compose the shot by holding the

camera vertically to focus, and then returning to the

horizontal position to take the picture.

When objects are at different

distances

EN 53

Download from Www.Somanuals.com. All Manuals Search And Download.

Exposure (brightness)

Image quality

“Taking pictures with the right

brightness”

“Taking sharper pictures”

● Taking pictures with the optical zoom

Avoid using digital zoom (p. 31) to take pictures.

● Taking pictures at a low ISO sensitivity

● Taking pictures of a subject against a backlight

Faces or backgrounds are bright even when shot

against backlight.

If the picture is taken with a high ISO sensitivity,

noise (small colored spots and color unevenness

that were not in the original image) can occur, and

the image can appear grainy.

[SHADOW ADJUST] (p. 30)

● Taking pictures using [FACE/iESP] (p. 30)

Appropriate exposure is obtained for a face

against backlight, and the face is brightened.

“Selecting the ISO sensitivity” (p. 27)

● Taking pictures using [n] for [ESP/n]

(p. 30)

Panorama

Brightness is matched with a subject in the center

of the screen and the image is not affected by

background light.

“Taking pictures so that the frames are

stitched smoothly”

● A tip for panoramic shooting

● Taking pictures using [FILL IN] (p. 25) ﬂash

Taking pictures by pivoting with the camera at the

center prevents shifting of the image. When taking

pictures of close objects in particular, pivoting with

the lens end at the center produces favorable

results.

A subject against backlight is brightened.

● Taking pictures of a white beach or snow

scene

Set the mode to [q BEACH & SNOW] (p. 20)

● Taking pictures using exposure compensation

(p. 26)

[PANORAMA] (p. 22)

Adjust the brightness while viewing the screen

for taking the picture. Normally, taking pictures of

white subjects (such as snow) results in images

that are darker than the actual subject. Use the

exposure compensation to adjust in the positive

(+) direction to express whites as they appear.

When taking pictures of black subjects, on the

other hand, it is effective to adjust in the negative

(-) direction.

Batteries

“Making batteries last longer”

● Avoid any of the following operations when not

actually taking pictures because they deplete

the battery power

● Repeatedly pressing the shutter button

halfway.

● Repeatedly using the zoom.

Color hue

● Set [POWER SAVE] (p. 45) to [ON]

“Taking pictures with colors at the same

shade as they appear”

● Taking pictures by selecting white balance

(p. 27)

Best results in most environments can normally

be obtained with the [WB AUTO] setting, but for

some subjects, you should try experimenting

with different settings. (This is especially true for

sunshade under a clear sky, mixed natural and

artiﬁcial light settings, and so on.)

● Taking pictures using [FILL IN] (p. 25) ﬂash

Use of the ﬂash is also effective for shooting under

ﬂuorescent and other artiﬁcial lighting.

54 EN

Download from Www.Somanuals.com. All Manuals Search And Download.

Playback/Editing tips

Playback

“Playing images in the internal memory

and card”

● Remove the card and display the images in

internal memory

● “Inserting the SD/SDHC memory card (sold

separately)” (p. 13)

● Selecting a storage device

[INTERNAL/SD] (p. 39)

“Viewing images with high picture quality

on a high-deﬁnition TV”

● Connect the camera to the TV using an HDMI

cable (sold separately)

● “To play back camera images on a TV” (p. 44)

Editing

“Erasing the sound recorded to a still

image”

● Record over the sound with silence when

playing back the image

“Adding sound to still images [R]” (p. 38)

EN 55

Download from Www.Somanuals.com. All Manuals Search And Download.

Appendix

Camera care

Battery

• In addition to the batteries provided with the

camera, the following types of battery can be

used. Choose the power source best suited to

the situation.

Exterior

• Wipe gently with a soft cloth. If the camera is

very dirty, soak the cloth in mild soapy water

and wring well. Wipe the camera with the

damp cloth and then dry it with a dry cloth. If

you have used the camera at the beach, use a

cloth soaked in clean water and wrung well.

AA alkaline batteries

The number of pictures that you can take may

vary considerably depending on the battery

manufacturer and shooting conditions.

AA NiMH batteries (rechargeable batteries)

Being rechargeable, Olympus NiMH batteries

are reusable and economical. For details, refer

to the instruction manual for your charger.

Monitor

• Wipe gently with a soft cloth.

Lens

• Blow dust off the lens with a commercial

blower, then wipe gently with a lens cleaner.

Caution:

There is a risk of explosion if the battery is

replaced with the incorrect battery type.

Dispose of the used battery following the

instructions. (p. 61)

Storage

• The following types of batteries cannot be

used:

• When storing the camera for extended

periods, remove the battery, AC adapter and

card, and keep in a cool, dry place that is well

ventilated.

• Periodically insert the battery and test the

camera functions.

Lithium battery pack (CR-V3)/AA (R6)

manganese (zinc-carbon) batteries/AA (R6)

oxyride batteries/AA (R6) lithium batteries

• Power consumption by the camera varies

depending on which functions are used.

• During the conditions described below, power

is consumed continuously and the battery

becomes exhausted quickly.

Avoid leaving the camera in places where

chemical products are handled since this

may result in corrosion.

• The zoom is used repeatedly.

• The shutter button is pressed halfway

repeatedly in shooting mode, activating the

auto focus.

• A picture is displayed on the monitor for an

extended period of time.

• The camera is connected to a printer.

• Battery life varies depending on the type of

battery, manufacturer, shooting conditions,

etc. Similarly, the camera may turn off without

displaying the battery level warning or may

display the battery level warning more quickly.

Using a separately sold AC

adapter

An AC adapter (D-7AC/sold separately) is useful

for time-consuming tasks such as when running

a slideshow for a long period of time.

Do not use any other AC adapter with this

camera.

56 EN

Download from Www.Somanuals.com. All Manuals Search And Download.

Current memory indicator

v: Internal memory is being used

w: Card is being used

Using an SD/SDHC memory

card

A card (and internal memory) also corresponds

to the ﬁlm that records images in a ﬁlm camera.

Otherwise, the recorded images (data) can be

erased, and retouching is also available with

the use of a computer. Cards can be removed

from the camera and exchanged, but this is

not possible with the internal memory. Use of

larger capacity cards enables you to take more

pictures.

Current memory

indicator

0.0

AUTO

ISO

AUTO

12M

4/30

SD/SDHC memory card write-protect

Shooting mode

switch

The SD/SDHC memory card body has a

write-protect switch. If you set the switch to

the “LOCK” side, you will not be able to write

to the card, delete data or format. Return the

switch to enable writing.

’10/02/26 12:30

Playback mode

Even if [MEMORY FORMAT]/[FORMAT],

[ERASE], [SEL. IMAGE], [ALL ERASE] or

[ERASE EVENT] is performed, the data in

the card is not completely erased. When

disposing of the card, damage the card to

prevent the disclosure of personal data.

LOCK

Cards compatible with this camera

SD/SDHC memory cards (for more

information, visit the Olympus website)

Readout/recording process of the card

During shooting, the current memory

indicator is displayed in red while the camera

is writing data. Never open the battery/card

compartment cover or unplug the USB

cable. This can not only damage the image

data but also render the internal memory or

card unusable.

Using a new card

Cards must be formatted with this camera

before ﬁrst use or after being used with other

cameras or computers.

[MEMORY FORMAT]/[FORMAT] (p. 39)

0.0

AUTO

ISO

AUTO

Checking the image saving location

The memory indicator shows whether the

internal memory or card is being used during

shooting and playback.

12M

Displayed in red

EN 57

Download from Www.Somanuals.com. All Manuals Search And Download.

Number of storable pictures (still images)/Remaining recording time (movies) in the

internal memory and SD/SDHC memory cards

The ﬁgures in the following tables are quoted only as a rough guideline. The actual number of

storable pictures or remaining recording times will differ according to the shooting conditions and

memory cards used.

The ﬁgures in the table below are the number of the storable pictures when using the internal

memory formatted. “Erasing data completely [MEMORY FORMAT]/[FORMAT]” (p.39)

Still pictures

Number of storable still pictures

COMPRES-

IMAGE SIZE

Internal memory

SD/SDHC memory card (1 GB)

SION

With sound

Without sound

144

With sound

164

Without sound

165

143

280

5 3968×2976

4 3264×2448

n 2560×1920

3 2048×1536

2 1600×1200

1 1280×960

7 640×480

283

320

323

209

211

239

241

405

411

462

469

333

338

380

385

671

689

766

786

530

541

605

618

1,020

842

1,061

870

1,164

961

1,211

992

1,561

1,263

2,308

3,791

5,898

1,658

1,327

2,527

4,423

7,583

1,781

1,442

2,633

4,326

6,729

1,892

1,514

2,884

5,047

8,652

190

368

191

373

217

420

218

426

K 3968×2232

0 1920×1080

780

804

890

917

1,474

1,561

1,682

1,781

Movies

Remaining recording time

Internal memory SD/SDHC memory card (1 GB)

With sound Without sound

10 min. 32 sec. 10 min. 42 sec.

IMAGE

QUALITY

IMAGE SIZE

With sound

9 min. 13 sec.

Without sound

9 min. 22 sec.

L 1280×720

18 min. 10 sec. 18 min. 45 sec. 20 min. 44 sec. 21 min. 24 sec.

35 min. 11 sec. 37 min. 27 sec. 40 min. 10 sec. 42 min. 45 sec.

8 640×480

320×240

The maximum ﬁle size of a single movie is 4 GB, regardless of the capacity of the card.

Increasing the number of pictures that can be taken

Either erase unwanted images, or connect the camera to a computer or other device to save the

images, and then erase the images in the internal memory or card. [ERASE] (p. 17, 37), [ALL

ERASE] (p. 37), [SEL. IMAGE] (p. 37), [ERASE EVENT](p. 37), [MEMORY FORMAT]/[FORMAT]

(p. 39)

58 EN

Download from Www.Somanuals.com. All Manuals Search And Download.

SAFETY PRECAUTIONS

Handling the Camera

WARNING

Do not use the camera near ﬂammable or

explosive gases.

Do not use the ﬂash and LED on people

(infants, small children, etc.) at close range.

You must be at least 1 m (3 ft.) away from the

faces of your subjects. Firing the ﬂash too close

to the subject’s eyes could cause a momentary

loss of vision.

CAUTION

RISK OF ELECTRIC SHOCK

•

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRICAL

SHOCK, DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED OLYMPUS

SERVICE PERSONNEL.

•

Keep young children and infants away from

the camera.

An exclamation mark enclosed in a

triangle alerts you to important operating

and maintenance instructions in the

documentation provided with the product.

•

Always use and store the camera out of the

reach of young children and infants to prevent

the following dangerous situations which could

cause serious injury:

DANGER

WARNING

CAUTION

If the product is used without observing

the information given under this symbol,

serious injury or death may result.

•

Becoming entangled in the camera strap,

causing strangulation.

Accidentally swallowing the battery, cards or

other small parts.

Accidentally ﬁring the ﬂash into their own eyes

or those of another child.

Accidentally being injured by the moving parts

of the camera.

If the product is used without observing the

information given under this symbol, injury

or death may result.

If the product is used without observing the

information given under this symbol, minor

personal injury, damage to the equipment,

or loss of valuable data may result.

WARNING!

•

Do not look at the sun or strong lights with the

camera.

Do not use or store the camera in dusty or

humid places.

TO AVOID THE RISK OF FIRE OR ELECTRICAL SHOCK,

NEVER DISASSEMBLE, EXPOSE THIS PRODUCT TO

WATER OR OPERATE IN A HIGH HUMIDITY ENVIRONMENT.

•

Do not cover the ﬂash with a hand while ﬁring.

Use SD/SDHC memory cards only. Never use

other types of cards.

If you accidently insert another type of card into

the camera, contact an authorized distributor or

service center. Do not try to remove the card by

force.

General Precautions

Read All Instructions — Before you use the

product, read all operating instructions. Save all

manuals and documentation for future reference.

Cleaning — Always unplug this product from the

wall outlet before cleaning. Use only a damp

cloth for cleaning. Never use any type of liquid or

aerosol cleaner, or any type of organic solvent to

clean this product.

CAUTION

•

Stop using the camera immediately if you

notice any unusual odors, noise, or smoke

around it.

Attachments — For your safety, and to avoid

damaging the product, use only accessories

recommended by Olympus.

•

Never remove the batteries with bare hands,

Water and Moisture — For precautions on

products with weatherproof designs, read the

weatherprooﬁng sections.

Location — To avoid damage to the product, mount

the product securely on a stable tripod, stand,

or bracket.

Power Source — Connect this product only to the

power source described on the product label.

Lightning — If a lightning storm occurs while using

an AC adapter, remove it from the wall outlet

immediately.

which may cause a ﬁre or burn your hands.

Never hold or operate the camera with wet

hands.

Do not leave the camera in places where it may

be subject to extremely high temperatures.

Doing so may cause parts to deteriorate and, in

some circumstances, cause the camera to catch

ﬁre. Do not use the charger or AC adapter if it is

covered (such as a blanket). This could cause

overheating, resulting in ﬁre.

•

Foreign Objects — To avoid personal injury, never

insert a metal object into the product.

Heat — Never use or store this product near any

heat source such as a radiator, heat register,

stove, or any type of equipment or appliance that

generates heat, including stereo ampliﬁers.

EN 59

Download from Www.Somanuals.com. All Manuals Search And Download.

•

Handle the camera with care to avoid getting a

low-temperature burn.

•

Do not use batteries if their body is not covered by

the insulating sheet or if the sheet is torn, as this

may cause ﬂuid leaks, ﬁre or injury.

•

When the camera contains metal parts,

overheating can result in a low-temperature

burn. Pay attention to the following:

CAUTION

•

Do not remove batteries immediately after using

the camera. Batteries may become hot during

prolonged use.

Always unload the battery from the camera before

storing the camera for a long period.

•

When used for a long period, the camera will

get hot. If you hold on to the camera in this

state, a low-temperature burn may be caused.

In places subject to extremely cold

temperatures, the temperature of the camera’s

body may be lower than the environmental

temperature. If possible, wear gloves when

handling the camera in cold temperatures.

•

The following AA (R6) batteries cannot

be used.

•

Be careful with the strap.

•

Be careful with the strap when you carry the

camera. It could easily catch on stray objects

and cause serious damage.

Battery Handling Precautions

Batteries whose bodies are only partially or not

at all covered by an insulating sheet.

Follow these important guidelines to prevent

batteries from leaking, overheating, burning,

exploding, or causing electrical shocks or

burns.

DANGER

Batteries whose -terminals are raised, but not

covered by an insulating sheet.

•

Use only the Olympus brand NiMH batteries and

proper ﬁtting charger.

•

Never heat or incinerate batteries.

Take precautions when carrying or storing

batteries to prevent them from coming into contact

with any metal objects such as jewelry, pins,

fasteners, etc.

•

Never store batteries where they will be

exposed to direct sunlight, or subjected to high

temperatures in a hot vehicle, near a heat source,

etc.

To prevent causing battery leaks or damaging their

terminals, carefully follow all instructions regarding

the use of batteries. Never attempt to disassemble

a battery or modify it in any way, solder, etc.

If battery ﬂuid gets into your eyes, ﬂush your eyes

immediately with clear, cold running water and

seek medical attention immediately.

Batteries whose -terminals are ﬂat and not

completely covered by an insulating sheet.

(Such batteries cannot be used even if the

-terminals are partially covered.)

•

If NiMH batteries are not charged within the

speciﬁed time, stop charging them and do not

use them.

Do not use a battery if it is cracked or broken.

If a battery leaks, becomes discolored, deformed

or becomes abnormal in any other way during

operation, stop using the camera.

If a battery leaks ﬂuid onto your clothing or skin,

remove the clothing and ﬂush the affected area

with clean, running cold water immediately. If

the ﬂuid burns your skin, seek medical attention

immediately.

•

Always store batteries out of the reach of small

children. If a child accidentally swallows a battery,

seek medical attention immediately.

•

WARNING

Keep batteries dry at all times.

•

To prevent batteries from leaking, overheating,

or causing a ﬁre or explosion, use only batteries

recommended for use with this product.

Never mix batteries (old and new batteries,

charged and uncharged batteries, batteries of

different manufacture or capacity, etc.).

Never attempt to charge alkaline, lithium or CR-V3

lithium battery packs.

Never subject batteries to strong shocks or

continuous vibration.

•

Insert the battery carefully as described in the

operating instructions.

60 EN

Download from Www.Somanuals.com. All Manuals Search And Download.

Caution for Usage Environment

Battery Handling Precautions

•

To protect the high-precision technology contained

in this product, never leave the camera in the

places listed below, no matter if in use or storage:

•

Olympus NiMH batteries (included in some areas)

are intended for use only with Olympus digital

cameras. Never use these batteries with any other

device.

Always charge NiMH batteries (included in some

areas) before using them for the ﬁrst time, or if

they have not been used for a long period.

Always charge sets of batteries (included in some

areas) (2 or 4) together.

Do not use alkaline batteries unless it is absolutely

necessary. In some cases, alkaline batteries may

have a shorter service life than NiMH. Alkaline

battery performance is limited, especially at

low temperatures. The use of NiMH batteries is

recommended.

•

Places where temperatures and/or humidity

are high or go through extreme changes.

Direct sunlight, beaches, locked cars, or near

other heat sources (stove, radiator, etc.) or

humidiﬁers.

•

In sandy or dusty environments.

Near ﬂammable items or explosives.

In wet places, such as bathrooms or in the rain.

When using products with weatherproof designs,

read their manuals as well.

•

In places prone to strong vibrations.

•

Never drop the camera or subject it to severe

shocks or vibrations.

When mounted on a tripod, adjust the position of

the camera with the tripod head. Do not twist the

camera.

•

AA manganese (Zinc-Carbon) batteries cannot be

used with this camera.

When operating the camera with battery power

at low temperatures, try to keep the camera

and spare batteries as warm as possible.

Batteries which run down at low temperatures

may be restored after they are warmed at room

temperature.

•

Do not touch electric contacts on cameras.

Do not leave the camera pointed directly at the

sun. This may cause lens or shutter curtain

damage, color failure, ghosting on the CCD, or

may possibly cause ﬁres.

Do not push or pull severely on the lens.

Before storing the camera for a long period,

remove the batteries. Select a cool, dry location

for storage to prevent condensation or mold from

forming inside the camera. After storage, test the

camera by turning it on and pressing the shutter

button to make sure that it is operating normally.

Always observe the operating environment

restrictions described in the camera’s manual.

•

Recommended temperature ranges for NiMH

batteries:

•

Operation ................... 0°C to 40°C (32°F to 104°F)

Charge ....................... 0°C to 40°C (32°F to 104°F)

Storage.......................-20°C to 30°C (-4°F to 86°F)

Using, charging or storing the batteries outside

these ranges could shorten battery life or affect

battery performance. Always unload the batteries

from the camera before storing the camera for a

long period.

•

Before using NiMH or NiCd batteries, always read

the provided instructions.

The number of pictures you can take may vary

depending on the shooting conditions or batteries.

Before going on a long trip, and especially before

traveling abroad, purchase an ample supply of

extra batteries. The recommended batteries may

be difﬁcult to obtain while traveling.

•

Please recycle batteries to help save our planet’s

resources. When you throw away dead batteries,

be sure to cover their terminals and always

observe local laws and regulations.

EN 61

Download from Www.Somanuals.com. All Manuals Search And Download.

LCD Monitor

Warning

•

Do not push the monitor forcibly; otherwise the

image may become vague, resulting in a playback

mode failure or damage to the monitor.

A strip of light may appear on the top/bottom of the

monitor, but this is not a malfunction.

When a subject is viewed diagonally in the

camera, the edges may appear zigzagged on the

monitor. This is not a malfunction; it will be less

noticeable in playback mode.

Unauthorized photographing or use of

copyrighted material may violate applicable

responsibility for unauthorized photographing,

use or other acts that infringe upon the rights of

•

In places subject to low temperatures, the LCD

monitor may take a long time to turn on or its

color may change temporarily. When using the

camera in extremely cold places, it is a good idea

to occasionally place it in a warm place. An LCD

monitor exhibiting poor performance due to low

temperatures will recover in normal temperatures.

The LCD used for the monitor is made with

high-precision technology. However, black spots

or bright spots of light may appear constantly on

the LCD Monitor. Due to its characteristics or the

angle at which you are viewing the monitor, the

spot may not be uniform in color and brightness.

This is not a malfunction.

materials or this software may be reproduced

or used in any form or by any means, electronic

or mechanical, including photocopying and

recording or the use of any type of information

storage and retrieval system, without the prior

written permission of Olympus. No liability

is assumed with respect to the use of the

information contained in these written materials

or software, or for damages resulting from

the use of the information contained therein.

Olympus reserves the right to alter the features

and contents of this publication or software

without obligation or advance notice.

Legal and Other Notices

•

Olympus makes no representations or warranties

regarding any damages, or beneﬁt expected by

using this unit lawfully, or any request from a third

person, which are caused by the inappropriate use

of this product.

Olympus makes no representations or warranties

regarding any damages or any beneﬁt expected

by using this unit lawfully which are caused by

erasing picture data.

Disclaimer of Warranty

•

Olympus makes no representations or warranties,

either expressed or implied, by or concerning any

content of these written materials or software, and

in no event shall be liable for any implied warranty

of merchantability or ﬁtness for any particular

purpose or for any consequential, incidental or

indirect damages (including but not limited to

damages for loss of business proﬁts, business

interruption and loss of business information)

arising from the use or inability to use these

written materials or software or equipment. Some

countries do not allow the exclusion or limitation

of liability for consequential or incidental damages

or of the implied warranty, so the above limitations

may not apply to you.

•

Olympus reserves all rights to this manual.

62 EN

Download from Www.Somanuals.com. All Manuals Search And Download.

FCC Notice

•

Radio and Television Interference

Changes or modiﬁcations not expressly approved

by the manufacturer may void the user’s authority

to operate this equipment. This equipment has

been tested and found to comply with the limits for

a Class B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide

reasonable protection against harmful interference

in a residential installation.

•

This equipment generates, uses, and can radiate

radio frequency energy and, if not installed

and used in accordance with the instructions,

may cause harmful interference to radio

communications.

However, there is no guarantee that interference

will not occur in a particular installation. If this

equipment does cause harmful interference

to radio or television reception, which can be

determined by turning the equipment off and

on, the user is encouraged to try to correct the

interference by one or more of the following

measures:

•

Adjust or relocate the receiving antenna.

Increase the distance between the camera and

receiver.

•

Connect the equipment to an outlet on a circuit

different from that to which the receiver is

connected.

Consult your dealer or an experienced radio/TV

technician for help. Only the OLYMPUS-supplied

USB cable should be used to connect the

camera to USB enabled personal computers

(PC).

Any unauthorized changes or modiﬁcations to

this equipment would void the user’s authority

to operate it.

Use Only Dedicated Rechargeable

Battery, Battery Charger and

AC adapter

We strongly recommend that you use only

the genuine Olympus dedicated rechargeable

battery, battery charger and AC adapter with

this camera. Using a non-genuine rechargeable

battery, battery charger and/or AC adapter

may result in ﬁre or personal injury due to

leakage, heating, ignition or damage to the

battery. Olympus does not assume any liability

for accidents or damage that may result from

the use of a battery, battery charger and/or

AC adapter that are not genuine Olympus

accessories.

EN 63

Download from Www.Somanuals.com. All Manuals Search And Download.

preventive maintenance, installation,

deinstallation, or maintenance.

Olympus reserves the right to (i) use

For customers in North and South

America

For customers in USA

Declaration of Conformity

reconditioned, refurbished, and/or serviceable

used parts (that meet Olympus’s quality

assurance standards) for warranty or any other

repairs and (ii) make any internal or external

design and/or feature changes on or to its

products without any liability to incorporate such

changes on or to the Products.

Model Number

Trade Name

Responsible Party

:SP-600UZ

:OLYMPUS

Address

:3500 Corporate

Parkway, P.O. Box

610, Center Valley, PA

18034-0610, U.S.A.

:484-896-5000

WHAT IS NOT COVERED BY THIS

LIMITED WARRANTY

Excluded from this limited warranty and not

warranted by Olympus in any fashion, either

express, implied, or by statute, are:

Telephone Number

Tested To Comply With FCC Standards

FOR HOME OR OFFICE USE

(a) products and accessories not manufactured by

Olympus and/or not bearing the “OLYMPUS” brand

label (the warranty coverage for products and

accessories of other manufacturers, which may be

distributed by Olympus, is the responsibility of the

manufacturers of such products and accessories

in accordance with the terms and duration of such

manufacturers’ warranties);

This device complies with Part 15 of the FCC rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference

received, including interference that may cause

undesired operation.

(b) any Product which has been disassembled,

repaired, tampered with, altered, changed, or

modiﬁed by persons other than Olympus’s own

authorized service personnel unless repair by

others is made with the written consent of Olympus;

from wear, tear, misuse, abuse, negligence,

sand, liquids, impact, improper storage,

nonperformance of scheduled operator and

maintenance items, battery leakage, use of non-

“OLYMPUS” brand accessories, consumables, or

supplies, or use of the Products in combination

with non-compatible devices;

For customers in Canada

This Class B digital apparatus meets all

requirements of the Canadian Interference-

Causing Equipment Regulations.

OLYMPUS WORLDWIDE LIMITED

WARRANTY - IMAGING PRODUCTS

Olympus warrants that the enclosed Olympus®

imaging product(s) and related Olympus®

accessories (individually a “Product” and

collectively the “Products”) will be free from

defects in materials and workmanship under

normal use and service for a period of one (1)

year from the date of purchase.

If any Product proves to be defective within the

one-year warranty period, the customer must

return the defective Product to any of Olympus

Service Centers, following the procedure

set forth below (See “WHAT TO DO WHEN

SERVICE IS NEEDED”).

Olympus, at its sole discretion, will repair,

replace, or adjust the defective Product, provided

that Olympus investigation and factory inspection

disclose that (a) such defect developed under

normal and proper use and (b) the Product is

covered under this limited warranty.

Repair, replacement, or adjustment of defective

Products shall be Olympus’s sole obligation and

the customer’s sole remedy hereunder.

The customer is liable and shall pay for shipment

of the Products to the Olympus Service Center.

Olympus shall not be obligated to perform

(d) software programs;

(e) supplies and consumables (including but not

limited to lamps, ink, paper, ﬁlm, prints, negatives,

cables and batteries); and/or

(f) Products which do not contain a validly placed

and recorded Olympus serial number, unless they

are a model on which Olympus does not place

and record serial numbers.

EXCEPT FOR THE LIMITED WARRANTY SET

FORTH ABOVE, OLYMPUS MAKES NO AND

DISCLAIMS ALL OTHER REPRESENTATIONS,

GUARANTIES, CONDITIONS, AND

WARRANTIES CONCERNING THE

PRODUCTS, WHETHER DIRECT OR INDIRECT,

EXPRESS OR IMPLIED, OR ARISING UNDER

ANY STATUTE, ORDINANCE, COMMERCIAL

USAGE OR OTHERWISE, INCLUDING BUT

NOT LIMITED TO ANY WARRANTY OR

REPRESENTATION AS TO THE SUITABILITY,

DURABILITY, DESIGN, OPERATION, OR

64 EN

Download from Www.Somanuals.com. All Manuals Search And Download.

CONDITON OF THE PRODUCTS (OR ANY

PART THEREOF) OR THE MERCHANTABILITY

OF THE PRODUCTS OR THEIR FITNESS FOR

A PARTICULAR PURPOSE, OR RELATING

TO THE INFRINGEMENT OF ANY PATENT,

RIGHT USED OR INCLUDED THEREIN.

IF ANY IMPLIED WARRANTIES APPLY AS

A MATTER OF LAW, THEY ARE LIMITED

IN DURATION TO THE LENGTH OF THIS

LIMITED WARRANTY.

SOME STATES MAY NOT RECOGNIZE

A DISCLAIMER OR LIMITATION OF

WARRANTIES AND/OR LIMITATION OF

LIABILITY SO THE ABOVE DISCLAIMERS AND

EXCLUSIONS MAY NOT APPLY.

THE CUSTOMER MAY ALSO HAVE DIFFERENT

AND/OR ADDITIONAL RIGHTS AND REMEDIES

THAT VARY FROM STATE TO STATE.

THE CUSTOMER ACKNOWLEDGES AND

AGREES THAT OLYMPUS SHALL NOT

BE RESPONSIBLE FOR ANY DAMAGES

THAT THE CUSTOMER MAY INCUR FROM

DELAYED SHIPMENT, PRODUCT FAILURE,

PRODUCT DESIGN, SELECTION, OR

WHAT TO DO WHEN SERVICE IS NEEDED

The customer must transfer any image or other

data saved on a Product to another image or

data storage medium and/or remove any ﬁlm

from the Product prior to sending the Product to

Olympus for service.

IN NO EVENT SHALL OLYMPUS BE

RESPONSIBLE FOR SAVING, KEEPING OR

MAINTAINING ANY IMAGE OR DATA SAVED

ON A PRODUCT RECEIVED BY IT FOR

SERVICE, OR ON ANY FILM CONTAINED

WITHIN A PRODUCT RECEIVED BY IT

FOR SERVICE, NOR SHALL OLYMPUS BE

RESPONSIBLE FOR ANY DAMAGES IN

THE EVENT ANY IMAGE OR DATA IS LOST

OR IMPAIRED WHILE SERVICE IS BEING

PERFORMED (INCLUDING, WITHOUT

LIMITATION, DIRECT, INDIRECT, INCIDENTAL,

CONSEQUENTIAL OR SPECIAL DAMAGES,

LOSS OF PROFITS OR LOSS OF USE),

WHETHER OR NOT OLYMPUS SHALL BE OR

SHOULD BE AWARE OF THE POSSIBILITY OF

SUCH POTENTIAL LOSS OR IMPAIRMENT.

PRODUCTION, IMAGE OR DATA LOSS OR

IMPAIRMENT OR FROM ANY OTHER CAUSE,

WHETHER LIABILITY IS ASSERTED IN

CONTRACT, TORT (INCLUDING NEGLIGENCE

AND STRICT PRODUCT LIABILITY) OR

OTHERWISE. IN NO EVENT SHALL OLYMPUS

BE LIABLE FOR ANY INDIRECT, INCIDENTAL,

CONSEQUENTIAL OR SPECIAL DAMAGES OF

ANY KIND (INCLUDING WITHOUT LIMITATION

LOSS OF PROFITS OR LOSS OF USE),

WHETHER OR NOT OLYMPUS SHALL BE OR

SHOULD BE AWARE OF THE POSSIBILITY OF

SUCH POTENTIAL LOSS OR DAMAGE.

Package the Product carefully using ample

padding material to prevent damage in transit

and either deliver it to the Authorized Olympus

Dealer that sold you the Product or ship it

postage prepaid and insured to any of our

Olympus Service Centers.

When returning Products for service, your

package should include the following:

Sales receipt showing date and place of

purchase.

Copy of this limited warranty bearing the

Product serial number corresponding to the

serial number on the Product (unless it is a

model on which Olympus does not place and

record serial numbers).

Representations and warranties made by any

person, including but not limited to dealers,

representatives, salespersons, or agents of

Olympus, which are inconsistent or in conﬂict

with or in addition to the terms of this limited

warranty, shall not be binding upon Olympus

unless reduced to writing and approved by an

expressly authorized ofﬁcer of Olympus.

This limited warranty is the complete and

exclusive statement of warranty which

Olympus agrees to provide with respect to the

Products and it shall supersede all prior and

contemporaneous oral or written agreements,

understandings, proposals, and communications

pertaining to the subject matter hereof.

This limited warranty is exclusively for the

beneﬁt of the original customer and cannot be

transferred or assigned.

A detailed description of the problem.

Sample prints, negatives, digital prints (or ﬁles on

disk) if available and related to the problem.

When service is completed, the Product will be

returned to you postage prepaid.

WHERE TO SEND PRODUCT FOR

SERVICE

See “WORLDWIDE WARRANTY” for the

nearest service center.

INTERNATIONAL WARRANTY SERVICE

International warranty service is available under

this warranty.

EN 65

Download from Www.Somanuals.com. All Manuals Search And Download.

affect the customer’s legal warranty rights under

the applicable national legislation governing the

sale of consumer goods mentioned above.

This Guarantee does not cover the following

and the customer will be required to pay repair

charge, even for defects occurring within the

Guarantee period referred to above.

For customers in Europe

“CE” mark indicates that this product complies

with the European requirements for safety,

health, environment and customer protection.

“CE” mark cameras are intended for sales in

Europe.

a. Any defect that occurs due to mishandling

(such as an operation performed that is not

mentioned in the Handling Care or other

sections of the instructions, etc.)

b. Any defect that occurs due to repair,

modiﬁcation, cleaning, etc. performed by

anyone other than Olympus or an Olympus

authorized service station.

This symbol [crossed-out wheeled bin WEEE

Annex IV] indicates separate collection of waste

electrical and electronic equipment in the EU

countries.

Please do not throw the equipment into the

domestic refuse.

Please use the return and collection systems

available in your country for the disposal of this

product.

c. Any defect or damage that occurs due to

transport, a fall, shock, etc. after purchase of

the product.

d. Any defect or damage that occurs due to ﬁre,

earthquake, ﬂood damage, thunderbolt, other

natural disasters, environmental pollution and

irregular voltage sources.

This symbol [crossed-out wheeled bin Directive

2006/66/EC Annex II] indicates separate

collection of waste batteries in the EU countries.

Please do not throw the batteries into the

domestic refuse. Please use the return and

collection systems available in your country for

the disposal of the waste batteries.

e. Any defect that occurs due to careless or

improper storage (such as keeping the

product under conditions of high temperature

and humidity, near insect repellents such as

naphthalene or harmful drugs, etc.), improper

maintenance, etc.

f. Any defect that occurs due to exhausted

batteries, etc.

g. Any defect that occurs due to sand, mud, etc.

entering the inside of the product casing.

h. When the Guarantee Certiﬁcate is not

returned with the product.

i. When any alterations whatsoever are made to

the Guarantee Certiﬁcate regarding the year,

month and date of purchase, the customer’s

name, the dealer’s name, and the serial

number.

j. When proof of purchase is not presented with

this Guarantee Certiﬁcate.

This Guarantee applies to the product only; the

Guarantee does not apply to any other accessory

equipment, such as the case, strap, lens cap and

batteries.

Olympus’s sole liability under this Guarantee shall

be limited to repairing or replacing the product.

Any liability under the Guarantee for indirect

or consequential loss or damage of any kind

incurred or suffered by the customer due to a

defect of the product, and in particular any loss

or damage caused to any lenses, ﬁlms, other

equipment or accessories used with the product

or for any loss resulting from a delay in repair or

loss of data, is excluded. Compelling regulations

by law remain unaffected by this.

Provisions of warranty

If this product proves to be defective, although it

has been used properly (in accordance with the

written Handling Care and Operating instructions

supplied with it), during the applicable national

warranty period and has been purchased from

an authorized Olympus distributor within the

business area of Olympus Europa Holding GmbH

as stipulated on the website: http://www.olympus.

com this product will be repaired, or at Olympus’s

option replaced, free of charge. To claim under

this warranty the customer must take the product

before the end of the applicable national warranty

period to the dealer where the product was

purchased or any other Olympus service station

within the business area of Olympus Europa

Holding GmbH as stipulated on the website:

http://www.olympus.com. During the one year

period of the World Wide Guarantee the customer

may turn the product in at any Olympus service

station. Please notice that not in all countries

such Olympus service station exists.

The customer shall transport the product to the

dealer or Olympus authorized service station

at his own risk and shall be responsible for any

costs incurred in transporting the product.

Provisions of Guarantee

“OLYMPUS IMAGING CORP., Shinjuku

Monolith, 2-3-1 Nishi-Shinjuku, Shinjuku-ku,

Tokyo 163-0914, Japan grants a one year World

Wide Guarantee. This worldwide Guarantee

must be presented at an Olympus authorized

repair service station before any repair can

be made under conditions of this Guarantee.

This Guarantee is valid only if the Guarantee

Certiﬁcate and proof of purchase are presented

at the Olympus repair service station. Please note

that this Guarantee is in addition to and does not

66 EN

Download from Www.Somanuals.com. All Manuals Search And Download.

e. Any defect that occurs due to careless or

improper storage (such as keeping the

product under conditions of high temperature

and humidity, near insect repellents such as

naphthalene or harmful drugs, etc.), improper

maintenance, etc.

f. Any defect that occurs due to exhausted

batteries, etc.

g. Any defect that occurs due to sand, mud, etc.

entering the inside of the product casing.

h. When this Warranty Certiﬁcate is not returned

with the product.

i. When any alterations whatsoever are made

to the Warranty Certiﬁcate regarding the year,

month and date of purchase, the customer’s

name, the dealer’s name, and the serial

number.

j. When proof of purchase is not presented with

this Warranty Certiﬁcate.

This Warranty applies to the product only; the

Warranty does not apply to any other accessory

equipment, such as the case, strap, lens cap and

batteries.

Notes regarding Guarantee maintenance

This Guarantee will only be valid if the Guarantee

Certiﬁcate is duly completed by Olympus or an

authorized dealer or other documents contain

sufﬁcient proof. Therefore, please make sure

that your name, the name of the dealer, the

serial number and the year, month and date of

purchase are all completed or the original invoice

or the sales receipt (indicating the dealer’s

name, the date of purchase and product type) is

attached to this Guarantee Certiﬁcate. Olympus

reserves the right to refuse free-of-charge service

if neither Guarantee Certiﬁcate is completed

nor the above document is attached or if the

information contained in it is incomplete or

illegible.

Since this Guarantee Certiﬁcate will not be re-

issued, keep it in a safe place.

Please refer to the list on the web site: http://

www.olympus.com for the authorized international

Olympus service network.

For customers in Asia

Olympus’ sole liability under this warranty shall be

limited to repairing or replacing the product and

any liability for indirect or consequential loss or

damage of any kind incurred or suffered by the

customer due to a defect in the product, and in

particular any loss or damage caused to any ﬁlm

or lenses or other equipment or accessories used

with the product or for any loss resulting from

delay in repair, is excluded.

Provisions of warranty

lf this product proves to be defective, although it

has been used properly (in accordance with the

written Handling Care and Operating instructions

supplied with it), during a period of up to one

year from the date of purchase this product will

be repaired, or at Olympus’s option replaced,

free of charge. To claim under warranty the

customer must take the product and this Warranty

certiﬁcate before the end of the one year warranty

period to the dealer where the product was

purchased or any Olympus authorized service

station listed in the instructions and request the

necessary repairs.

Notes;

This Warranty is in addition to and does not affect

the customer’s statutory right.

lf you have any queries regarding this Warranty,

call any of the Olympus authorized service

stations listed in the instructions.

The customer shall transport the product to the

dealer or Olympus authorized service station

at his own risk and shall be responsible for any

costs incurred in transporting the product.

This warranty does not cover the following

and the customer will be required to pay repair

charge, even for defects occurring within the one

year period referred to above.

a. Any defect that occurs due to mishandling

(such as an operation performed that is not

mentioned in the Handling Care or other

sections of the instructions, etc.)

b. Any defect that occurs due to repair,

modiﬁcation, cleaning, etc. performed by

anyone other than Olympus or an Olympus

authorized service station.

c. Any defect or damage that occurs due to

transport, a fall, shock, etc. after purchase of

the product.

Notes regarding warranty maintenance

This Warranty will only be valid if the Warranty

Certiﬁcate is duly completed by Olympus or the

dealer. Make sure that your name, the name of

the dealer, the serial number and the year, month

and date of purchase are all completed.

Since this Warranty Certiﬁcate will not be

re-issued, keep it in a safe place.

Any request for repair by a customer in same

country where the product was purchased shall

be subject to the terms of the warranty issued by

the Olympus distributor in that country. Where

the local Olympus distributor does not issue a

separate warranty or where the customer is not in

the country where the product was purchased the

terms of this worldwide warranty shall apply.

Where applicable, this Warranty is valid

worldwide. The Olympus authorized service

stations listed in this Warranty will gladly honor it.

Please refer to the appended list for the

authorized international Olympus service

network.

d. Any defect or damage that occurs due to ﬁre,

earthquake, ﬂood damage, thunderbolt, other

natural disasters, environmental pollution and

irregular voltage sources.

EN 67

Download from Www.Somanuals.com. All Manuals Search And Download.

Disclaimer of Warranty

Olympus makes no representations or

warranties, either expressed or implied, by or

concerning any content if these written materials

or software, and in no event shall be liable

for any implied warranty of merchantability or

ﬁtness for any particular purpose or for any

consequential, incidental or indirect damages

(including but not limited to damages for loss

of business proﬁts, business interruption and

loss of business information) arising from the

use of inability to use these written materials or

software. Some states do not allow the exclusion

or limitation of liability for consequential or

incidental damages, so the above limitations

may not apply to you.

Trademarks

•

IBM is a registered trademark of International

Business Machines Corporation.

Microsoft and Windows are registered trademarks

of Microsoft Corporation.

•

Macintosh is a trademark of Apple Inc.

The SDHC logo is a trademark.

All other company and product names are

registered trademarks and/or trademarks of their

respective owners.

•

The standards for camera ﬁle systems referred to

in this manual are the “Design rule for Camera File

system/DCF” standards stipulated by the Japan

Electronics and Information Technology Industries

Association (JEITA).

THIS PRODUCT IS LICENSED UNDER THE

AVC PATENT PORTFOLIO LICENSE FOR THE

PERSONAL AND NONCOMMERCIAL USE

OF A CONSUMER TO (i) ENCODE VIDEO IN

COMPLIANCE WITH THE AVC STANDARD (“AVC

VIDEO”) AND/OR (ii) DECODE AVC VIDEO THAT

WAS ENCODED BY A CONSUMER ENGAGED

IN A PERSONAL AND NON-COMMERCIAL

ACTIVITY AND/OR WAS OBTAINED FROM A

VIDEO PROVIDER LICENSED TO PROVIDE AVC

VIDEO. NO LICENSE IS GRANTED OR SHALL

BE IMPLIED FOR ANY OTHER USE. ADDITIONAL

INFORMATION MAY BE OBTAINED FROM MPEG

LA, L.L.C. SEE HTTP://WWW.MPEGLA.COM

68 EN

Download from Www.Somanuals.com. All Manuals Search And Download.

SPECIFICATIONS

Camera

Product type

Digital camera (for shooting and displaying)

Recording system

Still pictures

Digital recording, JPEG (in accordance with Design rule for Camera File system (DCF))

Exif 2.2, Digital Print Order Format (DPOF), PRINT Image Matching III, PictBridge

Wave format

Applicable standards

Sound with still

pictures

Movie

MPEG-4AVC/H.264

Memory

Internal memory

SD memory card

SDHC memory card

No. of effective pixels

Image pickup device

Lens

12,000,000 pixels

1/2.33” CCD (primary color ﬁlter)

Olympus lens 5.0 to 75.0 mm, f3.5 to 5.4

(equivalent to 28 to 420 mm on a 35 mm camera)

Photometric system

Shutter speed

Digital ESP metering, spot metering system

1/2 to 1/2000 sec.

Shooting range

0.15 m (0.5 ft.) to (W) 1.8 m (5.9 ft.) to (T) (normal/macro mode)

0.01 m (0.03 ft.) to (super macro mode)

Monitor

2.7” TFT color LCD display, 230,000 dots

Connector

DC-IN jack / Multi-connector (USB connector, A/V OUT jack) /

HDMI micro connector (type D)

Automatic calendar

system

2000 up to 2099

Operating environment

Temperature

0 °C to 40 °C (32 °F to 104 °F) (operation)/

-20 °C to 60 °C (-4 °F to 140 °F) (storage)

Humidity

Power supply

Dimensions

30 % to 90 % (operation)/10 % to 90 % (storage)

AA alkaline / NiMH battery (four) or separately sold AC adapter

109.9 mm (W) x 72.2 mm (H) x 75.1 mm (D)

(4.3 x 2.8 x 3.0 in.)

Weight

433 g (15.3 oz) (Including battery and card)

Design and speciﬁcations subject to change without notice.

HDMI, the HDMI Logo and High-Deﬁnition Multimedia

Interface are trademarks or registered trademarks of

HDMI Licensing LLC.

EN 69

Download from Www.Somanuals.com. All Manuals Search And Download.

VN692201

Download from Www.Somanuals.com. All Manuals Search And Download.

Moxa Technologies Computer Hardware CP 118U User Manual
Mr Coffee Espresso Maker ECMP30 33 User Manual
MTD Snow Blower 312 980I000 User Manual
MTX Audio Car Stereo System NDM219 User Manual
Nady Systems Microphone SCM 900 User Manual
NCR Computer Hardware 7458 User Manual
NETGEAR Network Router D6400 User Manual
Niles Audio Home Theater System SW65 User Manual
Outlaw Audio Speaker ECS 10 User Manual
Palsonic Flat Panel Television PDP4220HD User Manual