Download from Www.Somanuals.com. All Manuals Search And Download.
3 Copyright
All other terms and product names may be trademarks or registered trademarks of their respective owners, and are hereby
acknowledged.
Legal Notices
APPLE COMPUTER, INC. (“APPLE”) MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT
LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,
REGARDING THE APPLE SOFTWARE. APPLE DOES NOT WARRANT, GUARANTEE, OR MAKE ANY REPRESENTATIONS
REGARDING THE USE OR THE RESULTS OF THE USE OF THE APPLE SOFTWARE IN TERMS OF ITS CORRECTNESS,
ACCURACY, RELIABILITY, CURRENTNESS, OR OTHERWISE. THE ENTIRE RISK AS TO THE RESULTS AND
PERFORMANCE OF THE APPLE SOFTWARE IS ASSUMED BY YOU. THE EXCLUSION OF IMPLIED WARRANTIES IS NOT
PERMITTED BY SOME STATES. THE ABOVE EXCLUSION MAY NOT APPLY TO YOU.
IN NO EVENT WILL APPLE, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE TO YOU FOR ANY CONSEQUENTIAL,
INCIDENTAL OR INDIRECT DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION,
LOSS OF BUSINESS INFORMATION, AND THE LIKE) ARISING OUT OF THE USE OR INABILITY TO USE THE APPLE SOFTWARE
EVEN IF APPLE HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. BECAUSE SOME STATES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE LIMITATIONS MAY NOT
APPLY TO YOU. Apple’s liability to you for actual damages from any cause whatsoever, and regardless of the form of the action
(whether in contract, tort [including negligence], product liability or otherwise), will be limited to $50.
PANTONE® Colours displayed in the software application or in the user documentation may not match PANTONE-identified
standards.þ Consult current PANTONE Colour Publications for accurate color. PANTONE® and other Pantone, Inc. trademarks are
the property of Pantone, Inc. © Pantone, Inc., 2001.
Pantone, Inc. is the copyright owner of color data and/or software which are licensed to Electronics for Imaging, Inc.,þto distribute
for use only in combination with the products, or software of Electronics for Imaging, Inc. PANTONE Colour Data and/or Software
shall not be copied onto another disk or into memory except as part of the delivery of the Electronics for Imaging, Inc., products
or software.
This product includes software developed by the Apache Software Foundation (http://www.apache.org/).
FCC Information
WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by
the manufacturer could void the user’s authority to operate this equipment.
Class B Declaration of Conformity
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC
rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
In order to maintain compliance with FCC regulations, shielded cables must be used with this equipment. Operation with non-
approved equipment or unshielded cables is likely to result in interference to radio and TV reception. The user is cautioned that
changes and modifications made to the equipment without the approval of manufacturer could void the user’s authority to operate
this equipment.
ES3640e MFP EFI User’s Software Installation Guide - 3
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Copyright
Industry Canada Class B Notice
This Class B digital apparatus complies with Canadian ICES-003.
Avis de Conformation Classe B de l’Industrie Canada
Cet appareil numérique de la Classe B est conforme à la norme NMB-003 du Canada.
RFI Compliance Notice
This equipment has been tested concerning compliance with the relevant RFI protection requirements both individually and on
system level (to simulate normal operation conditions). However, it is possible that these RFI Requirements are not met under
certain unfavorable conditions in other installations. It is the user who is responsible for compliance of his particular installation.
Dieses Gerät wurde sowohl einzeln als auch in einer Anlage, die einen normalen Anwendungsfall nachbildet, auf die Einhaltung
der Funkentstörbestimmungen geprüft. Es ist jedoch möglich, dass die Funkentstörbestimmungen unter ungünstigen Umständen
bei anderen Gerätekombinationen nicht eingehalten werden. Für die Einhaltung der Funkentstörbestimmungen einer gesamten
Anlage, in der dieses Gerät betrieben wird, ist der Betreiber verantwortlich.
Compliance with applicable regulations depends on the use of shielded cables. It is the user who is responsible for procuring the
appropriate cables.
Die Einhaltung zutreffender Bestimmungen hängt davon ab, dass geschirmte Ausführungen benützt werden. Für die Beschaffung
richtiger Ausführungen ist der Betreiber verantwortlich.
Software License Agreement
YOU SHOULD CAREFULLY READ THE FOLLOWING TERMS AND CONDITIONS BEFORE USING THIS SOFTWARE. IF YOU DO NOT
AGREE TO THE TERMS AND CONDITIONS OF THIS AGREEMENT, DO NOT USE THE SOFTWARE. INSTALLING OR USING THE
SOFTWARE INDICATES THAT YOU AGREE TO AND ACCEPT THE TERMS OF THIS AGREEMENT. IF YOU DO NOT AGREE TO ACCEPT
THE TERMS OF THIS AGREEMENT YOU MAY RETURN THE UNUSED SOFTWARE FOR A FULL REFUND TO THE PLACE OF PURCHASE.
License
EFI grants you a non-exclusive license to use the Software and accompanying documentation (“Documentation”) included with
the Product. The Software is licensed, not sold. You may use the Software solely for your own customary business or personal
purposes. You may not rent, lease, sublicense or lend the Software or use the Software in any time sharing, service bureau, or
similar arrangement.
You may not make or have made, or permit to be made, any copies of the Software or portions thereof, except one (1) copy for
backup or archive purposes in support of your use of the Software as permitted hereunder. You may not copy the Documentation.
You may not attempt to localize, translate, disassemble, decompile, decrypt, reverse engineer, discover the source code of,
modify, create derivative works of, or in any way change any part of the Software.
The terms, conditions, and restrictions in the License Agreement apply to all bug fixes, patches, releases, release notes, updates,
and upgrades related to the Software.
Proprietary Rights
You acknowledge and agree that all rights, title and interest, including all intellectual property rights, in and relating to the
Software, Documentation and all modifications and derivative works thereof are solely owned by and shall remain with EFI and
its suppliers. Except for the express limited license granted above to use the Software, no right or license of any kind is granted.
You receive no rights or license under any patents, copyrights, trade secrets, or trademarks (whether registered or unregistered).
You agree not to adopt, register, or attempt to register any EFI trademark or trade name (“EFI Mark”) or any confusingly similar
mark, URL, internet domain name, or symbol as your own name or the name of your affiliates or products, and not to take any
other action which impairs or reduces the trademark rights of EFI or its suppliers.
Confidentiality
The Software is confidential, proprietary information of EFI and you may not distribute or disclose the Software. You may,
however, permanently transfer all of your rights under this Agreement to another person or legal entity provided that: (1) such
a transfer is authorized under all applicable export laws and regulations, including the U.S. Export Administration Regulations,
(2) you transfer to the person or entity all of the Software and Documentation (including all copies, updates, upgrades, prior
versions, component parts, the media and printed materials, and this Agreement); (3) you retain no copies of the Software and
ES3640e MFP EFI User’s Software Installation Guide - 4
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Copyright
Documentation, including copies stored on a computer; and (4) the recipient agrees to the terms and conditions of this
Agreement.
Remedies and Termination
Unauthorized use, copying, or disclosure of the Software, or any breach of this Agreement will result in automatic termination of
this license and will make available to EFI other legal remedies. In the event of termination, you must destroy all copies of the
Software, Documentation, and all component parts thereof. All provisions of this Agreement relating to disclaimers of warranties,
limitation of liability, remedies, damages, governing law, jurisdiction, venue, and EFI’s proprietary rights shall survive
termination.
Limited Warranty and Disclaimer
EFI warrants to the original purchaser (“Customer”) for thirty (30) days from the date of original purchase from EFI or its
authorized retailer that the Software will perform in substantial conformance to the Documentation when the Product is used as
authorized by EFI’s specifications. EFI warrants the media containing the Software against failure during the above warranty
period. EFI makes no warranty or representation that the Software will meet your specific requirements, that the operation of
the Software will be uninterrupted, secure, fault-tolerant, or error free, or that all defects in the Software will be corrected. EFI
makes no warranty, implied or otherwise, regarding the performance or reliability of any third party products (software or
hardware. THE INSTALLATION OF ANY THIRD PARTY PRODUCTS OTHER THAN AS AUTHORIZED BY EFI WILL VOID THIS
WARRANTY. IN ADDITION, USE, MODIFICATION, AND/OR REPAIR OF THE PRODUCT OTHER THAN AS AUTHORIZED BY EFI WILL
VOID THIS WARRANTY.
EXCEPT FOR THE ABOVE EXPRESS LIMITED WARRANTY AND TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, EFI
MAKES AND YOU RECEIVE NO WARRANTIES OR CONDITIONS ON THE SOFTWARE, EXPRESS, IMPLIED, STATUTORY, OR IN ANY
OTHER PROVISION OF THIS AGREEMENT OR COMMUNICATION WITH YOU, AND EFI SPECIFICALLY DISCLAIMS ANY IMPLIED
WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT OF THIRD
PARTY RIGHTS.
Limitation of Liability
TO THE MAXIMUM EXTENT PERMITTED BY LAW, EFI AND ITS SUPPLIERS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING
LOSS OF DATA, LOST PROFITS, COST OF COVER OR OTHER SPECIAL, INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES
ARISING FROM THE SALE, INSTALLATION, MAINTENANCE, USE, PERFORMANCE OR FAILURE OF THE SOFTWARE, HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY. THIS LIMITATION WILL APPLY EVEN IF EFI HAS BEEN ADVISED OF THE POSSIBILITY
OF SUCH DAMAGE. YOU ACKNOWLEDGE THAT THE PRICE OF THE PRODUCT REFLECTS THIS ALLOCATION OF RISK. BECAUSE
SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL
DAMAGES, THE ABOVE LIMITATION MAY NOT APPLY TO YOU.
You are hereby notified that Adobe Systems Incorporated, a Delaware corporation located at 345 Park Avenue, San Jose, CA
95110-2704 (“Adobe”) is a third-party beneficiary to this agreement to the extent that this agreement contains provisions which
relate to your use of any software, font programs, typefaces, and/or trademarks licensed or supplied by Adobe. Such provisions
are made expressly for the benefit of Adobe and are enforceable by Adobe in addition to EFI. ADOBE WILL HAVE NO LIABILITY
WHATSOEVER TO YOU FOR ANY ADOBE SOFTWARE OR TECHNOLOGY LICENSED HEREUNDER.
Export Controls
EFI’s Products are subject to U.S. export laws and regulations, including the U.S. Export Administration Regulations, as well as
foreign export laws and regulations. You agree that you will not use, distribute, transfer, export, or re-export any portion of the
Product or the Software in any form in violation of any applicable laws or regulations of the United States or the country in which
you obtained them.
U.S. Government Restricted Rights:
Use, duplication, or disclosure of the Software by the United States Government is subject to restrictions as set forth in FAR
12.212 or DFARS 227.7202-3 -227.7202-4 and, to the extent required under U.S. federal law, the minimum restricted rights as
set out in FAR 52.227-14, Restricted Rights Notice (June 1987) Alternate III(g)(3)(June 1987) or FAR 52.227-19 (June 1987).
To the extent any technical data is provided pursuant to the Agreement, such data is protected per FAR 12.211 and DFARS
227.7102-2 and to the extent explicitly required by the U.S. Government, is subject to limited rights as set out in DFARS
252.227.7015 (November 1995) and DFARS 252.227-7037 (September 1999). In the event that any of the above referenced
agency regulations are modified or superceded, the subsequent or equivalent regulation shall apply. The name of the Contractor
is Electronics for Imaging.
ES3640e MFP EFI User’s Software Installation Guide - 5
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Copyright
General
The rights and obligations of the parties related to this Agreement will be governed in all respects by the laws of the State of
California exclusively, as such laws apply to contracts between California residents performed entirely within California. The
United Nations Convention on Contracts for the International Sale of Goods and any other similar convention does not apply to
this Agreement. For all disputes related to this Agreement, you consent to the personal and exclusive jurisdiction and venue of
the state courts in San Mateo County, California and the federal court for the Northern District of California. This Agreement is
the entire agreement held between us and supersedes any other communications or advertising with respect to the Software. If
any provision of this Agreement is held invalid, such provision shall be deemed modified to the extent necessary to be enforceable
and the other provisions in this Agreement shall continue in full force and effect.
If you have any questions, please see EFI’s web site at www.efi.com.
Electronics for Imaging
303 Velocity Way
Foster City, CA 94404
ES3640e MFP EFI User’s Software Installation Guide - 6
Download from Www.Somanuals.com. All Manuals Search And Download.
About the Documentation
Introduction
About this manual
Configuring installed options
Completing the Windows NT 4.0 printer connection
1-36
1-37
Setting up PostScript or PCL printing with Windows 2000/XP/
Server 2003
Server 2003
Installing Color files from the User Software CD
Installing the ICC profiles on a Windows computer
Loading the monitor settings file
1-75
1-76
1-76
1-78
1-80
Loading the ICC printer device profile
Installing the printer description files for Windows
ES3640e MFP EFI User’s Software Installation Guide - 7
Download from Www.Somanuals.com. All Manuals Search And Download.
8 Contents
Setting up the ES3640e MFP as a PostScript printer
2-81
Configuring the connection for Command WorkStation LE for Mac OS X
2-91
Loading the monitor settings file
Loading the ICC printer profile
2-97
2-98
Setting up Fiery WebTools
On a Windows computer
4-100
Setting up printing on Windows NT 4.0 or Windows 2000/XP/Server 2003
Reinstalling the Adobe PostScript Printer Driver on Windows 98/Me 4-100
Problems with the Fiery utilities on Windows computers
On a Mac OS computer
4-101
4-101
4-101
4-102
Setting up the Fiery in the Mac OS 9 Chooser
Setting up the Fiery in the Mac OS X Print Center
Index
103
ES3640e MFP EFI User’s Software Installation Guide - 8
Download from Www.Somanuals.com. All Manuals Search And Download.
9 About the documentation
This manual is part of a set of Fiery Network Controller for
ES3640e MFP, herein referred to as the “Fiery,” documentation
that includes the following manuals for users and system
administrators. Most are available as Acrobat PDF (Portable
Document Format) files on the User Documentation CD.
About the
Documentation
• The User Software Installation Guide describes how to install
software from the User Software CD to enable users to print to
the Fiery Network Controller for ES3640e MFP with the EFI
PostScript driver, and also describes setting up printing
connections to the Fiery.
• The Configuration Guide explains basic configuration and
administration of the Fiery for the supported platforms and
network environments. It also includes guidelines for setting up
UNIX, Windows NT 4.0/2000/Server 2003, and Novell NetWare
servers to provide printing services to users.
• The Printing Guide describes the printing features of the Fiery
for users who send jobs from their computers using the EFI
PostScript driver.
• The Color Guide provides information on managing the colour
output of the Fiery. It explains how to calibrate your Fiery and
take advantage of the ColorWise® colour management system,
as well as features in ColorWise Pro Tools™.
• The Fiery colour Reference addresses concepts and issues
associated with managing colour output of the Fiery and outlines
key workflow scenarios. In addition, it offers information on
printing colour documents from popular Microsoft Windows and
Apple Mac OS applications.
• The Job Management Guide explains the functions of the job
management utilities, including Command WorkStation™,
Command WorkStation LE™, and DocBuilder Pro™, and how you
can use them to monitor and control jobs on the Fiery.
This manual is intended for an operator or administrator, or a
user with the necessary access privileges, who monitors and
manages job flow, performs colour calibration, and
troubleshoots problems that may arise.
ES3640e MFP EFI User’s Software Installation Guide - 9
Download from Www.Somanuals.com. All Manuals Search And Download.
10 Introduction
This manual describes how to install user software for the Fiery
Network Controller for ES3640e MFP and how to set up printing
from Microsoft Windows and Apple Mac OS computers. For
information about setting up network servers and clients to use
the Fiery, see Chapter 2 of the Configuration Guide. For general
information on using your computer, application software, or
network, see the manuals that accompany those products.
Introduction
Note:The term “Fiery” is used in this manual to refer to the Fiery
Network Controller for ES3640e MFP. The name “Aero” is used in
illustrations to represent the Fiery. The term “Windows” is used to
refer to Windows 98, Windows Me, Windows NT 4.0, Windows
2000, Windows XP, and Windows Server 2003, wherever
appropriate.
The Fiery includes support for Fiery WebTools™ and software for
Command WorkStation, which enables an operator to manage all
jobs sent to the Fiery. Although it may not be the case at all sites,
the documentation for this product assumes the presence of an
operator who controls and manages jobs sent by users
from remote workstations.
About this manual
This manual covers the following topics:
• Installing printer files on Windows and Mac OS computers
• Setting up printing connections on Windows and Mac OS
computers
• Installing Fiery® utilities and other user software on Windows
and Mac OS computers
ES3640e MFP EFI User’s Software Installation Guide - 10
Download from Www.Somanuals.com. All Manuals Search And Download.
11 Introduction
Fiery WebTools
Fiery WebTools allow you to manage your Fiery remotely from the
Internet or from your company’s intranet. You access Fiery
WebTools from the Fiery WebTools home page.
Fiery
WebTools
For more
information
Summary
Status
Shows you the jobs currently
processing and printing.
See Chapter 8 of the
Printing Guide.
WebLink
Provides a link to another web
page, provided you have a
valid Internet connection.
See the Printing
Guide Chapter 8 and
the Configuration
Guide Chapter 6.
WebDownloa
der
Allows you to download
PostScript, PCL, EPS, and PDF
files to the Fiery.
See the Printing
Guide.
WebSetup
(Windows
only)
Allows you to modify the Fiery
configuration (Setup)
remotely. This function
See the Configuration
Guide.
requires the Administrator
password, if one has been set.
ES3640e MFP EFI User’s Software Installation Guide - 11
Download from Www.Somanuals.com. All Manuals Search And Download.
12 Introduction
System requirements
To install the Fiery user software on a Windows or Mac OS
computer, the computer must be equipped with a built-in or
external CD-ROM drive. The following table lists the minimum
system requirements.
Windows
2000/XP/
Server 2003
Minimum
requirements for
Windows 98/ Windows NT 4
Mac OS
Me
.0
Operating system
Windows 98/Me Windows NT
Windows 2000
Mac OS 8.6 to
9.2
with NT Service with Service
Pack 6
Pack 4
Mac OS X 10.1
to 10.3 Classic
Mode
Mac OS X
10.2.1 or higher
Native Mode
Windows XP
with Service
Pack 1
WindowsServer
2003 Standard
Edition,
Enterprise
Edition, or
Datacenter
Edition, all the
32-bit version
(printer driver
only supported)
Memory for printing
and Fiery utilities (Fiery
Downloader™,
ColorWise Pro Tools,
and Fiery Spooler
[Mac OS only])
8MB of RAM for printing
32MB of RAM
for printing
64MB of RAM
for utilities
128MB of RAM for printing and utilities
IPX/SPX, TCP/IP, or AppleTalk
Networking protocol
AppleTalk(Ether
Talk supported)
TCP/IP
(required for
MAC OS X 10.2
or later)
ES3640e MFP EFI User’s Software Installation Guide - 12
Download from Www.Somanuals.com. All Manuals Search And Download.
13 Introduction
Windows
2000/XP/
Server 2003
Minimum
requirements for
Windows 98/ Windows NT 4
Me .0
Mac OS
Networking protocol for TCP/IP
Fiery® utilities
TCP/IP
(required
for MAC OS X
10.2 or later)
(EtherTalk
supported)
Note:AppleTalk
can be used for
Fiery Downloader.
™
Fiery WebTools
is supported with
Classic Mode only.
PostScript printer
driver
Adobe
PostScript
Printer Driver
for Windows
(included with
user software)
Adobe
PostScript
Printer Driver
for Windows NT for Windows
(included with
user software)
Microsoft
PostScript
Printer Driver
Adobe
PostScript
Printer Driver
(included with
2000/XP/Server user software)
2003 (included
with Windows
2000/XP/Server
2003 operating
systems)
The PostScript
Printer
Description
(PPD) files for
Windows XP are
provided for
WindowsServer
2003
PCL printer driver
PCL Printer Driver for Windows only (included on
CD1)
ES3640e MFP EFI User’s Software Installation Guide - 13
Download from Www.Somanuals.com. All Manuals Search And Download.
14 Introduction
Windows
2000/XP/
Server 2003
Minimum
requirements for
Windows 98/ Windows NT 4
Me .0
Mac OS
Fiery WebTools™
• Java-enabled web browser:
Internet Explorer v5.5 or higher with SP2 (Windows 98/Me/NT 4.0/2000)
Internet Explorer v6.0 (Windows 2000/XP/Server 2003)
Internet Explorer v5.0 for Mac OS
Note:Microsoft releases frequent updates to its browsers. As support cannot
be guaranteed for all versions, use the versions specified for best results.
• A monitor and video memory that supports 16-bit color at a minimum
resolution of 800x600
• A TCP/IP-enabled network and the IP address or DNS name of the Fiery
• Web Services enabled on the Fiery
• Windows-based computer with a 200-MHz or greater
Pentium processor
• 60MB of available hard disk space for installation
Command WorkStation
(Windows only)
—
• At least 2x CD-ROM drive
• A monitor that supports 16-bit color at a minimum
resolution of 1024x768
• 128MB of RAM
• Video adapter card with 2MB of video memory
• TCP/IP networking protocol installed
• 300MHz Apple Macintosh G3
• 128MB RAM
• 80MB hard disk space (installation)
• 500MB hard disk space—recommended for generating full previews of raster
files and handling large PS/PDF files
Command WorkStation
LE (Mac OS X Native
Mode)
• Operating system—MAC 10.2.4 or later
• Java for Mac OS X—Java 2 Platform, Standard Edition, version 1.3.1
Note:More system resources (RAM and hard disk space) and a faster processor
will lead to better system performance.
DocBuilder Pro
In addition to requirements for Command
—
(available as an option) WorkStation:
• Windows-based computer with 333-MHz Pentium
processor
• 90MB of available hard disk space
• Dongle to be installed on parallel port for every client
workstation
on Command
WorkStation (Windows
only)
Parallel port
24MB of RAM
32MB of RAM
64MB of RAM
ES3640e MFP EFI User’s Software Installation Guide - 14
Download from Www.Somanuals.com. All Manuals Search And Download.
15 Introduction
Other Network Requirements
• Standard TCP/IP connectivity (for example, Sun SPARCStation or Silicon
Graphics workstation with Solaris version 2.5 or later, or SunOS version 4.1.x
software)
UNIX (TCP/IP)
workstation
• TCP/IP printing software that conforms to RFC1179 (Berkeley lpd protocol)
• Novell server
IPX (Novell) network
• Novell NetWare software version 4.x or 5.x
• NDPS gateway in Netware 5.x
• Support for Ethernet SNAP, Ethernet II, Ethernet 802.3, and Ethernet 802.2
frame types
ES3640e MFP EFI User’s Software Installation Guide - 15
Download from Www.Somanuals.com. All Manuals Search And Download.
1-16
1
This chapter describes the procedures for installing software and
setting up printing from a computer using a supported version of
Windows (Windows 98/Me, NT 4.0, 2000, XP or Server 2003).
Chapter 1:
Installing
User Software
on a Windows
Computer
The general steps for installing the software are as follows:
• Install the PostScript printer driver or PCL printer driver and
corresponding printer driver files and set up the printer driver to
communicate with the ES3640e MFP.
• Install Fiery utilities and user software—EFI Fiery Mail Port, Fiery
Remote Scan, Fiery Downloader, Fiery Printer Delete Utility,
ColorWise Pro Tools, and Command WorkStation.
Note:If the computer is not intended to be used by the ES3640e
MFP administrator, Command WorkStation may not be required.
• Configure the connection for Fiery utilities and user software.
• Copy additional files from CD1 as required.
ES3640e MFP EFI User’s Software Installation Guide - 16
Download from Www.Somanuals.com. All Manuals Search And Download.
1-17 Setting up PostScript or PCL printing with Windows 98/Me
1
Setting up PostScript or PCL printing with
Windows 98/Me
To set up the Fiery as a PostScript or PCL printer, you must install
the PostScript or PCL printer driver for Windows 98/Me and, for
PostScript, the corresponding printer description file. You must
also configure either a local connection for printing directly or a
If you are printing using SMB (Server Message Block), you can
connect to the Fiery and install the printer drivers in a single
procedure. For more information, see “Setting up SMB printing
with Windows 98/Me” on page 1-29.
Note:The procedures for setting up printing with the PostScript
and PCL printer drivers are similar. Either can, and should, be
installed using the Installer program on CD1 supplied with the
ES3640e MFP.
Installing the PostScript or PCL printer driver for
Windows 98/Me
The following procedure describes installing the printer driver
from CD1. Subsequent procedures describe configuring installable
options and setting up the printer connection.
Note:It is strongly recommended that you use the supplied
Drivers CD (CD1) to install the printer drivers. This will
automatically also install the OKI LPR utility, which greatly
simplifies network connection to the printer over a TCP/IP
connection. If you choose to use the standard Windows Add
Printer Wizard, you will need to install this utility from the CD
afterwards if you require these features.
To install the PostScript or PCL printer driver
for Windows 98/Me
1. Insert CD1 into your CD drive and wait for the CD to autorun the setup
program.
ES3640e MFP EFI User’s Software Installation Guide - 17
Download from Www.Somanuals.com. All Manuals Search And Download.
1-18 Installing User Software on a Windows Computer
1
If the CD does not autorun navigate to the CD root directory and
double-click the setup.exe program to start the installer.
2. Choose your preferred language for the installer from the drop-down list.
3. From the next screens after accepting the licensing agreement, follow the
on-screen instructions to complete the driver installation.
You can run this procedure twice if you want more than one driver
installed. For example, if you want the EFI PostScript driver and
the PCL driver run the procedure once for each driver and choose
the required driver each time. Choose a name for the installed
driver that will indicate which driver and printer it is for.
For networked printers the installer will also install the OKI LPR
program, which makes connecting the printer over TCP/IP
networks easy, and the Network Extension, which enables the
driver to query the printer and automatically enable any optional
hardware installed on it.
ES3640e MFP EFI User’s Software Installation Guide - 18
Download from Www.Somanuals.com. All Manuals Search And Download.
1-19 Setting up PostScript or PCL printing with Windows 98/Me
1
For the Fiery PS driver the installer will also install the Job Monitor
utility so that you can monitor the status of the printer and your
print jobs directly from the Windows desktop.
4. When driver installation is complete you may wish to install other
software utilities from the main installer screen. Information about each
is available on the installer screen.
ES3640e MFP EFI User’s Software Installation Guide - 19
Download from Www.Somanuals.com. All Manuals Search And Download.
1-20 Installing User Software on a Windows Computer
1
Configuring installed options
After you have completed the printer driver installation, you may
configure the driver for the optional hardware installed on the
ES3640e MFP. This allows the driver to take advantage of these
options. You can configure the options manually or, for TCP/IP
network connections, you can use the Two-Way Communication
feature to configure the options automatically.
Configuring installed options manually
The following procedure describes how to manually configure the
Fiery for the options installed on the printer.
To configure options manually for
Windows 98/Me
1. Click Start, choose Settings, and then choose Printers.
2. Right-click the appropriate printer icon and choose Properties from the
context menu.
3. Click the Installable Options (PS) or Device Options (PCL) tab.
4. Select an installed option from the Available Options list.
5. In the PS driver click Add to move the option to the Installed Options list.
This is not necessary in the PCL driver.
6. Click Apply, and then click OK.
Configuring installed options and updating print options
settings automatically
If you have a TCP/IP-enabled network, you can automatically
update your printer driver to reflect the options currently installed
on the printer. When the printer driver is first installed, the
options have default settings that were set up in Fiery Setup or
ColorWise Pro Tools. When you update the printer driver with the
Two-Way Communication feature, you allow the Fiery to complete
the actual setting.
ES3640e MFP EFI User’s Software Installation Guide - 20
Download from Www.Somanuals.com. All Manuals Search And Download.
1-21 Setting up PostScript or PCL printing with Windows 98/Me
1
The Two-Way Communication feature also updates Expert Color
Settings options to reflect the current Color settings on the Fiery.
To access the Expert Color Settings options, click the Expert
Settings tab in the ColorWise print option bar of the Fiery printing
tab of your PS printer driver. For more information, see Chapter 1
of the Color Guide.
To configure installed options and update print
options settings automatically for
Windows 98/Me
1. In the Installable Options (PS) or Device Options (PCL) tab, select Two-
Way Communication.
2. Type the ES3640e MFP’s IP address or DNS name.
3. In the PS driver, to display the ES3640e MFP’s current default settings
when opened, select Update Fiery Driver When Opened.
4. Click Update.
5. In the PS driver, to receive an e-mail notification after your job has been
printed, select Enable E-mail Notification, and type in the e-mail address
to which notification should be sent.
You will also receive e-mail notification of any errors that occur
during printing.
Note:Enable E-mail Notification is displayed only if Email Service
is enabled at Setup.
6. Click OK.
Completing the Windows 98/Me printer
connection
To print from Windows 98/Me, you should already have set up
network servers, if any, and set up the Fiery to accept print jobs
from your computer.
To complete the Windows 98/Me connection, you must configure a
connection on each Windows computer for the network.
ES3640e MFP EFI User’s Software Installation Guide - 21
Download from Www.Somanuals.com. All Manuals Search And Download.
1-22 Installing User Software on a Windows Computer
1
Completing the Windows 98/Me parallel port connection
Preparing a parallel port connection for Windows 98/Me requires
specific BIOS settings on your computer, and specific port and
printer settings for Windows 98/Me. In addition, the administrator
may need to change the parallel port timeout in Fiery Setup if you
choose to spool files to the Fiery, rather than print directly.
To prepare the Fiery and your computer for
parallel port printing
1. Connect the Fiery to the parallel port on your computer.
For instructions, see Chapter 1 of the Configuration Guide.
2. In Network Setup>Port Setup>Parallel Port Setup on the printing unit
Control Panel, set Enable Parallel Port to Yes.
For more information about Fiery Setup, see Chapter 4 of the
Configuration Guide.
3. If you want to spool files to the Fiery, set Port Timeout in Seconds to 10.
If you want to print directly to the Fiery, set Port Timeout in Seconds to 5.
4. In your computer’s BIOS settings, set Parallel Port Mode to ECP.
To access the BIOS settings, restart the computer and press the
key indicated on your monitor as soon as the computer starts up.
You may have to scroll through several menus to reach the
parallel port settings. After setting the Parallel Port Mode to ECP,
save your changed setting and exit.
To prepare the printer for parallel port printing
1. Click Start, choose Settings, and then choose Printers.
2. Click the appropriate printer icon and choose Properties from the File
menu.
3. Click the Details tab, and in the “Print to the following port” menu, select
LPT 1: (ECP Printer Port).
ES3640e MFP EFI User’s Software Installation Guide - 22
Download from Www.Somanuals.com. All Manuals Search And Download.
1-23 Setting up PostScript or PCL printing with Windows 98/Me
1
Note:Check this selection carefully. It may read LPT 1: (Printer
Port), which is not equivalent to LPT 1: (ECP Printer Port).
If this box does not read LPT 1: (ECP Printer Port), change the
port setting now, as described in “To prepare the port for parallel
port printing” on page 1-24, and then return to this procedure.
You may need your Windows System CD.
4. If you changed the selection in the “Print to the following port” menu,
click Apply.
A Warning dialog box may appear, stating that fonts you
downloaded to the previously selected port may be lost; click OK.
5. Click Spool Settings.
6. Select either “Spool print jobs so program finishes printing faster” or
“Print directly to the printer.”
The selection you make depends on the port timeout you set in
step 3 on page 1-22:
• If you set the Port Timeout in Seconds to 10, you can select
either option; however, spooling is faster.
• If you set the Port Timeout in Seconds to 5, select “Print directly
to the printer.”
7. Select “Disable bi-directional support for this printer” and click OK.
8. Click Apply.
You are now ready to print from your applications to the Fiery with
the parallel port. To confirm the connection, print a Test page.
ES3640e MFP EFI User’s Software Installation Guide - 23
Download from Www.Somanuals.com. All Manuals Search And Download.
1-24 Installing User Software on a Windows Computer
1
9. Click the General tab.
10. Click Print Test Page and click OK.
11. In the Job Notes field, type user and job identification information, and
click OK.
If the Test page prints successfully, you are ready to print from
the computer.
Perform the following procedure in Windows 98/Me only if the
LPT1 port is not currently set to ECP Printer Port.
To prepare the port for parallel port printing
in Windows 98/Me
1. Click Start, choose Settings, and then choose Control Panel.
2. Double-click System.
The System Properties dialog box appears.
3. Click the Device Manager tab.
ES3640e MFP EFI User’s Software Installation Guide - 24
Download from Www.Somanuals.com. All Manuals Search And Download.
1-25 Setting up PostScript or PCL printing with Windows 98/Me
1
4. Double-click Ports.
5. Double-click the port with LPT1 in its name.
6. In the (LPT1) Properties dialog box, click the Driver tab and then click
Update Driver.
The Update Device Driver Wizard dialog box appears.
7. Click Next.
ES3640e MFP EFI User’s Software Installation Guide - 25
Download from Www.Somanuals.com. All Manuals Search And Download.
1-26 Installing User Software on a Windows Computer
1
8. Select “Display a list of all the drivers in a specific location, so you can
select the driver you want,” and then click Next.
9. Select “Show all hardware.”
10. From the Manufacturers list, select “(Standard port types).” From the
Models list, select “ECP Printer Port” (not Printer Port). Click Next.
11. Click Yes in the Update Driver Warning dialog box.
13. Click Finish, then close the Printer Port Properties and System Properties
dialog boxes.
You must restart your computer to activate the new settings. After
Windows 98/Me restarts, complete the procedure described in “To
prepare the printer for parallel port printing” on page 1-22.
Completing the Windows 98/Me IPX/SPX or IPX (Novell)
connection
If you are printing through a Novell server, the Novell network and
file server should be set up before you begin. The file server
should be configured with a print server and print connection for
the ES3640e MFP. For details, see your NetWare documentation
and Chapter 2 of the Configuration Guide.
ES3640e MFP EFI User’s Software Installation Guide - 26
Download from Www.Somanuals.com. All Manuals Search And Download.
1-27 Setting up PostScript or PCL printing with Windows 98/Me
1
To print from Windows 98/Me computers over IPX (Novell), you
must first set up IPX/SPX protocols, and then configure the
ES3640e MFP by choosing the IPX frame type and entering the
settings for the port you use.
To select a frame type for IPX/SPX printing
for Windows 98/Me
1. Click Start, choose Settings, and then choose Control Panel.
2. Double-click the Network icon.
Make sure that IPX/SPX-compatible Protocol is listed in the
installed network components pane.
For instructions, see your Windows 98/Me documentation or
contact Microsoft Technical Support.
3. Double-click the IPX/SPX-compatible Protocol icon.
4. Click the Advanced tab.
5. Select Frame Type in the Property list.
ES3640e MFP EFI User’s Software Installation Guide - 27
Download from Www.Somanuals.com. All Manuals Search And Download.
1-28 Installing User Software on a Windows Computer
1
6. In the Value menu, choose the Frame Type that corresponds to the one
set in Fiery Network Setup.
If necessary, print the Configuration page from the printing unit
Control Panel to determine which frame type(s) are configured.
Note:Do not select Auto. Auto may not select the frame type
specified on the ES3640e MFP.
7. Click OK and close the Network Control Panel.
8. When prompted to restart your computer, click Yes.
To set up a port for IPX (Novell) printing with
Windows 98/Me
1. Click Start, choose Settings, and then choose Printers.
2. Click the appropriate printer icon and choose Properties from the File
menu.
3. Click the Details tab and click Add Port.
A list of connection options appears.
ES3640e MFP EFI User’s Software Installation Guide - 28
Download from Www.Somanuals.com. All Manuals Search And Download.
1-29 Setting up PostScript or PCL printing with Windows 98/Me
1
4. In the Add Port dialog box, specify the network path or click Browse for a
display of your network environment.
5. If you are using a NetWare file server, double-click the icon for the
NetWare file server to use for printing to the ES3640e MFP.
6. Click the printer icon for the NetWare print queue you want to use, and
then click OK.
7. In the Add Port dialog box, verify that the network path is updated and
click OK.
Your print jobs are transmitted to the specified print queue on the
Novell file server. The ES3640e MFP polls the file server, and if
jobs are present, they are transmitted to the Fiery.
8. To confirm the connection, click the General tab, click Apply, and then
click Print Test Page.
After the Test page prints successfully, you are ready to print from
the computer.
Setting up SMB printing with Windows 98/Me
SMB printing (also known as Windows or WINS printing) allows
you to print to a particular connection (Hold, Print, or Direct)
without a network server PC. To set up SMB printing, you must
have the TCP/IP protocol and Client for Microsoft Networks
installed.
Note:This procedure should not be necessary if you installed the
driver from the CD installer program. That program installs the
connection for you.
Each connection (Hold, Print, or Direct) requires a new
printer driver and printer description file. Repeat the procedure
“To set up SMB printing on Windows 98/Me” for each connection.
If you install more than one printer, give each a descriptive name
during printer driver installation, such as Aero-Print or Aero-Hold,
so you can easily identify printers.
ES3640e MFP EFI User’s Software Installation Guide - 29
Download from Www.Somanuals.com. All Manuals Search And Download.
1-30 Installing User Software on a Windows Computer
1
Before you begin
•
Configure the Fiery for SMB printing in Run Setup>Network
Setup>Service Setup>Windows Setup.
SMB printing is referred to as Windows Printing in Setup, on the
Control Panel Map, and on the Configuration page.
To set up SMB printing on Windows 98/Me
1. Run the OKI LPR utility on the Windows 98 PC.
This utility will have been installed along with the driver if you
installed it from the Drivers CD (CD1). If not, you will first need to
install it from the available utilities on that CD.
2. Choose Permote Print>Add Printer.
Choose the Printer Name of your ES3640e MFP from the list of
installed drivers.
3. Enter the ES3640e MFP’s IP address and any comments you wish to add.
Note:You can also locate the printer using the Discover button.
If you are not able to locate your ES3640e MFP, contact your
network administrator.
ES3640e MFP EFI User’s Software Installation Guide - 30
Download from Www.Somanuals.com. All Manuals Search And Download.
1-32 Installing User Software on a Windows Computer
1
Setting up IPP printing with Windows 98/Me
With Internet Printing Protocol (IPP), print jobs are sent to the
Fiery over the Internet.
IPP printing is supported on Windows 2000/XP but can be enabled
on Windows 98/Me computers by installing the wpnpins.exe client
CD). For more information about obtaining and installing this
client, contact Microsoft Technical Support.
Note:The IPP setup procedures are performed after installing the
appropriate printer drivers. See “To install the PostScript or PCL
printer driver for Windows 98/Me” on page 1-17.
Before you begin
1. Prepare the Fiery for TCP/IP printing.
2. Make sure the Fiery is configured for IPP printing.
For more information, see the Configuration Guide.
3. Specify the printing destination on your computer.
To set up IPP printing with Windows 98/Me
1. Click Start, choose Settings, and then choose Printers.
2. In the Printers windows, right-click the icon for the Fiery PostScript
printer driver and choose Properties.
3. Click the Details tab and click Add Port.
The Add Port dialog box appears.
4. Enter the network path for the printer.
5. Click OK.
Setting up PostScript or PCL printing with
ES3640e MFP EFI User’s Software Installation Guide - 32
Download from Www.Somanuals.com. All Manuals Search And Download.
1-33 Setting up PostScript or PCL printing with Windows NT 4.0
1
Windows NT 4.0
To set up the Fiery as a PostScript or PCL printer, you must install
the PostScript or PCL printer driver for Windows NT 4.0 and the
corresponding printer description files. You must also configure
the print connection between the computer and the Fiery. If you
are printing over a network, you must configure a network
connection. If you are printing directly to the printer, you must
configure a parallel port connection.
Note:The procedures for setting up printing with the PostScript
and PCL printer drivers are similar. The following illustrations show
the PostScript driver. Any differences are noted.
Installing the PostScript or PCL printer driver
for Windows NT 4.0
The procedure for installing the printer driver(s) for
Windows NT 4.0 is similar to that for installing under Windows 98.
If you follow that procedure, installing from the included Drivers
CD (CD1), the LPR and Network Extension utilities are
automatically included in the installation, and the network
connection on TCP/IP networks is established automatically by the
installer.
To install the PostScript or PCL printer driver
for Windows NT 4.0
1. Insert CD1 into your CD drive and wait for the CD to autorun the setup
program.
If the CD does not autorun navigate to the CD root directory and
double-click the setup.exe program to start the installer.
ES3640e MFP EFI User’s Software Installation Guide - 33
Download from Www.Somanuals.com. All Manuals Search And Download.
1-34 Installing User Software on a Windows Computer
1
2. Choose your preferred language for the installer from the drop-down list.
3. From the next screens after accepting the licensing agreement, follow the
on-screen instructions to complete the driver installation.
4. Click Install Driver to begin installing the required printer driver and
follow the on-screen instructions to complete the driver installation.
You can run this procedure twice if you want more than one driver
installed. For example, if you want the EFI PostScript driver and
the PCL driver run the procedure once for each driver and choose
the required driver each time. Choose a name for the installed
driver that will indicate which driver and printer it is for.
For networked printers the installer will also install the OKI LPR
program, which makes connecting the printer over TCP/IP
networks easy, and the Network Extension, which enables the
driver to query the printer and automatically enable any optional
hardware installed on it.
For the Fiery PS driver the installer will also install the Job Monitor
utility so that you can monitor the status of the printer and your
print jobs directly from the Windows desktop.
ES3640e MFP EFI User’s Software Installation Guide - 34
Download from Www.Somanuals.com. All Manuals Search And Download.
1-35 Setting up PostScript or PCL printing with Windows NT 4.0
1
5. When driver installation is complete you may wish to install other
software utilities from the main installer screen. Information about each
is available on the installer screen.
ES3640e MFP EFI User’s Software Installation Guide - 35
Download from Www.Somanuals.com. All Manuals Search And Download.
1-36 Installing User Software on a Windows Computer
1
Configuring installed options
After you have completed the printer driver installation, you must
configure the driver to reflect any optional hardware installed on
the ES3640e MFP. This allows the driver to take advantage of
these features. You can configure the options manually; or for
TCP/IP network connections, you can use the Two-Way
Communication feature to configure the options automatically.
Configuring installed options manually
The following procedure describes how to manually configure the
driver for the options installed on the printer.
To configure installable options from the printer
driver for Windows NT 4.0
1. Click Start>Settings>Printers.
2. Right-click the appropriate printer icon and choose Properties from the
context menu.
3. Click the Installable Options (PS) or Device Options (PCL) tab.
4. Select an installed option from the Available Options list.
This is not necessary in the PCL driver.
6. Click Apply, and then click OK.
You are ready to connect to your network type (see “Completing
the Windows NT 4.0 printer connection” on page 1-37).
Configuring installed options and updating print options
settings automatically
If you have a TCP/IP-enabled network, you can automatically
update your printer driver to reflect the options currently installed
on the ES3640e MFP. When the printer driver is first installed, the
installable options have default settings that were set up in
Fiery Setup or ColorWise Pro Tools. When you update the printer
ES3640e MFP EFI User’s Software Installation Guide - 36
Download from Www.Somanuals.com. All Manuals Search And Download.
1-37 Setting up PostScript or PCL printing with Windows NT 4.0
1
driver with the Two-Way Communication feature, you allow the
ES3640e MFP to complete the actual setting.
The Two-Way Communication feature also updates Expert Color
Settings options to reflect the current Color settings on the Fiery.
To access Expert Color Settings options, click the Expert Settings
tab in the ColorWise print option bar of the Fiery printing tab of
your printer driver. For more information, see Chapter 1 of the
Color Guide.
To set up Two-Way Communication in the printer
driver for Windows NT 4.0
1. In the Installable Options (PS) or Device Options (PCL) tab, select Two-
Way Communication.
2. Type the ES3640e MFP’s IP address or DNS name.
3. In the PS driver, to display the ES3640e MFP’s current default settings
when opened, select Update Fiery Driver When Opened.
4. Click Update.
5. In the PS driver, to receive an e-mail notification after your job has been
printed, select Enable E-mail Notification, and type in the e-mail address
to which notification should be sent.
You will also receive e-mail notification of any errors that occur
during printing.
Note:Enable E-mail Notification is displayed only if Email Service
is enabled at Setup.
6. Click OK.
Completing the Windows NT 4.0 printer
connection
To print from Windows NT 4.0, you must:
• Set up network servers, if any.
• Set up the Fiery to accept print jobs from your computer.
ES3640e MFP EFI User’s Software Installation Guide - 37
Download from Www.Somanuals.com. All Manuals Search And Download.
1-38 Installing User Software on a Windows Computer
1
• Configure a port on each Windows NT 4.0 computer for the
network type.
To do this
See
Configure the parallel
connection
Required for printing locally via
parallel port. See “Completing the
Windows NT 4.0 parallel port
Configure the TCP/IP (LPR port)
connection
Done automatically during driver
installation from CD.
Configure the IPX (Novell)
connection
Required for printing via a NetWare
server. See “Completing the
Windows NT 4.0 IPX (Novell)
connection” on page 1-39.
Completing the Windows NT 4.0 parallel port connection
The parallel port cable connects the Fiery to a single computer.
Once you have installed the Windows NT 4.0 PostScript printer
driver and the Fiery printer description files, complete the setup
for parallel port printing.
To set up parallel printing for Windows NT 4.0
1. Click Start, choose Settings, and then choose Printers.
2. Double-click the Fiery icon and choose Properties from the Printer menu.
In the Ports tab, confirm that LPT1 (Local Port) is checked.
The Fiery is ready to accept parallel print jobs from your
computer, using the Windows NT 4.0 PostScript printer driver and
the Fiery printer description file.
3. Click the General tab and click Print Test Page.
4. To share the printer on the network, click the Sharing tab.
Select whether to share the printer, and specify the operating
systems used by
network clients.
ES3640e MFP EFI User’s Software Installation Guide - 38
Download from Www.Somanuals.com. All Manuals Search And Download.
1-39 Setting up PostScript or PCL printing with Windows NT 4.0
1
5. Click OK to exit the Printer Properties dialog box.
Completing the Windows NT 4.0 IPX (Novell) connection
Complete the setup for the IPX (Novell) connection as follows:
• Configure the Novell network and file server for handling Fiery
print jobs. The file server should be configured with a print
server and print connection for the Fiery. For details, see your
NetWare documentation.
• Prepare the Fiery for IPX printing.
• Set up the IPX connection on the computer.
NetWare protocols (NWLink IPX/SPX Compatible Transport) and
NetWare client services should already be installed on the
Windows NT 4.0 computer.
To set up IPX (Novell) printing for Windows
NT 4.0
1. Double-click Network Neighborhood.
2. Double-click NetWare or Compatible Network.
A list of NetWare servers appears.
3. Double-click the NetWare Tree or File Server on which the network
administrator defined a print connection for the Fiery.
ES3640e MFP EFI User’s Software Installation Guide - 39
Download from Www.Somanuals.com. All Manuals Search And Download.
1-40 Installing User Software on a Windows Computer
1
You may have to log in to the file server to see the print
connections.
4. Double-click the print connection defined for the Fiery.
5. If the NetWare server does not have a suitable driver for the Fiery, you
may be asked if you want to set up the printer on your computer. Click
Yes.
6. Insert the Drivers CD (CD1) and click OK to install the Fiery PostScript
printer driver.
If the CD Installer window opens and prompts for your preferred
language, simply close the window.
7. In the dialog box displaying lists of manufacturers and printers, click
Have Disk.
The Install from Disk dialog prompts you for a disk.
8. Type the name of your CD driver (for example, D:\) and click Browse.
9. Browse to the \Drivers\<language>\nt40\PS (or PCL) folder and click
Open.
The selected path is copied to the Install from Disk dialog.
10. In the Printers list, select the driver for your printer model and click OK.
When installation is complete, a new printer window appears, with
the name of the print queue on the NetWare server.
11. Choose Properties from the File menu and click the Ports tab.
Verify that the connection to the NetWare queue is listed and
selected as a port for the Fiery.
ES3640e MFP EFI User’s Software Installation Guide - 40
Download from Www.Somanuals.com. All Manuals Search And Download.
1-41 Setting up PostScript or PCL printing with Windows NT 4.0
1
12. Click the General tab and click Print Test Page.
13. In the printer Job Notes window, type user and job identification
information and click OK.
The Test page remains listed in the queue window until it is
printed.
The Fiery polls the NetWare server for print jobs in the print
connection defined for the Fiery. When you print, your PostScript
files are spooled to that connection and transmitted over the
queue “port” to the Fiery.
Setting up SMB printing on Windows NT 4.0
SMB printing (also known as Windows printing) allows you to
install the PostScript or PCL printer driver and printer description
files, and print from your computer to a particular print connection
(Hold, Print, or Direct) on the Fiery. These instructions assume
you have installed the TCP/IP protocol and Client for
Microsoft Networks.
ES3640e MFP EFI User’s Software Installation Guide - 41
Download from Www.Somanuals.com. All Manuals Search And Download.
1-42 Installing User Software on a Windows Computer
Each connection (Hold, Print, or Direct) requires a new printer
driver and printer description file. To set up printing to a second or
third print connection, repeat the procedure “To set up SMB
printing on Windows NT 4.0” on page 1-42. If you install more
than one printer, give each a descriptive name during printer
driver installation, such as Aero-Print or Aero-Hold, so you can
easily identify printers.
Note:To change printer defaults and configure installable options
from Windows NT 4.0, you must log on with the special log-in
name, ‘efi_admin_efi’ (instead of Administrator) and use the
password specified in Fiery Setup. If you log on as a User, you can
install the printer driver through Point and Print, but you cannot
modify printer defaults and configure installable options.
Before you begin
•
Configure the Fiery for SMB printing in Run Setup>Network
Setup>Service Setup>Windows Setup.
SMB printing is referred to as Windows Printing in Setup, on the
Control Panel Map, and on the Configuration page. For more
information, see Chapter 2 of the Configuration Guide.
To set up SMB printing on Windows NT 4.0
1. Double-click Network Neighborhood.
ES3640e MFP EFI User’s Software Installation Guide - 42
Download from Www.Somanuals.com. All Manuals Search And Download.
1-43 Setting up PostScript or PCL printing with Windows NT 4.0
1
2. Browse for the printer you want to print to.
The printer name you are browsing for is the name entered in
Network Setup>Service Setup>Windows Setup>Server Name.
For this information, see the Configuration page.
The amount of network traffic determines the amount of time
required for the Browse function.
Note:You can also locate the printer with the Find feature on your
Windows computer. Click Start, choose Find, and then choose
Computer. Enter the name of the printer, and click Find Now.
If you are not able to locate your ES3640e MFP, contact your
network administrator.
3. Double-click the name of the Fiery to display enabled print connections.
4. Double-click the name of the connection you want to print to.
The Printers dialog box appears, asking whether you want to set
up the printer.
5. Select Yes to complete the installation for the selected connection.
Windows NT 4.0 downloads the printer driver and printer
description files from the Fiery to your computer and installation is
complete.
ES3640e MFP EFI User’s Software Installation Guide - 43
Download from Www.Somanuals.com. All Manuals Search And Download.
1-44 Installing User Software on a Windows Computer
1
Setting up PostScript or PCL printing with
Windows 2000/XP/Server 2003
To set up the Fiery as a PostScript or PCL printer, you must install
the PostScript or PCL printer driver for Windows 2000/XP/Server
2003 and the corresponding printer description files. You must
also configure the print connection between the computer and the
Fiery. If you are printing over a network, you must configure a
network connection. If you are printing directly to the printer, you
must configure a parallel port connection.
Note:For Windows Server 2003, use the Windows XP printer
driver.
Note:The procedures for configuring the options for the PostScript
and PCL printer drivers are similar.
Installing the PostScript or PCL printer driver
for Windows 2000/XP/Server 2003
The following procedure describes installing the printer driver
from the Drivers CD (CD1). Subsequent procedures describe
setting up the print connection.
To install the PostScript or PCL printer driver
for Windows 2000/XP/Server 2003
1. Insert CD1 into your CD drive and wait for the CD to autorun the setup
program.
If the CD does not autorun navigate to the CD root directory and
double-click the setup.exe program to start the installer.
ES3640e MFP EFI User’s Software Installation Guide - 44
Download from Www.Somanuals.com. All Manuals Search And Download.
1-45 Setting up PostScript or PCL printing with Windows
1
2. Choose your preferred language for the installer from the drop-down list.
3. From the next screens after accepting the licensing agreement, follow the
on-screen instructions to complete the driver installation.
4. Click Install Driver to begin installing the required printer driver and
follow the on-screen instructions to complete the driver installation.
You can run this procedure twice if you want more than one driver
installed. For example, if you want the EFI PostScript driver and
the PCL driver run the procedure once for each driver and choose
the required driver each time. Choose a name for the installed
driver that will indicate which driver and printer it is for.
For networked printers the installer will also install the OKI LPR
program which makes connecting the printer over TCP/IP
networks easy.
The installer will also install the Network Extension, which enables
the driver to query the printer and automatically enable any
optional hardware installed on it.
ES3640e MFP EFI User’s Software Installation Guide - 45
Download from Www.Somanuals.com. All Manuals Search And Download.
1-46 Installing User Software on a Windows Computer
1
For the Fiery PS driver the installer will also install the Job Monitor
utility so that you can monitor the status of the printer and your
print jobs directly from the Windows desktop.
5. When driver installation is complete you may wish to install other
software utilities from the main installer screen. Information about each
is available on the installer screen.
ES3640e MFP EFI User’s Software Installation Guide - 46
Download from Www.Somanuals.com. All Manuals Search And Download.
1-47 Setting up PostScript or PCL printing with Windows
1
Configuring installed options
After you have completed the printer driver installation, you must
configure the Fiery to reflect the options installed on the printer.
This allows the Fiery to take advantage of these options. You can
configure the options manually; or for TCP/IP network
connections, you can use the Two-Way Communication feature to
configure the options automatically.
Configuring installed options manually
The following procedure describes how to manually configure the
Fiery for the options installed on the printer.
To configure installable options on the Fiery from
the PostScript printer driver for Windows
2000/XP/Server 2003
1. Windows 2000: Click Start, choose Settings, and then choose Printers.
Windows XP: Click Start, and choose Printers and Faxes.
Windows Server 2003: Click Start, choose Control Panel, and then choose
Printers and Faxes.
2. Right-click the appropriate printer icon and choose Properties.
3. Click the Installable Options (PS) or Device Options (PCL) tab.
4. Select an installed option from the Available Options list.
6. Click OK to activate the current settings.
You are ready to connect to your network type (see the next
section “Completing the Windows 2000/XP/Server 2003
printer connection”).
Configuring installed options and updating print options
ES3640e MFP EFI User’s Software Installation Guide - 47
Download from Www.Somanuals.com. All Manuals Search And Download.
1-48 Installing User Software on a Windows Computer
1
settings automatically
If you have a TCP/IP-enabled network, you can automatically
update your printer driver to reflect the options currently installed
on the Fiery. When the printer driver is first installed, the
installable options have default settings that were set up in
Fiery Setup or ColorWise Pro Tools. When you update the printer
driver with the Two-Way Communication feature, you allow the
Fiery to complete the actual setting.
The Two-Way Communication feature also updates Expert Color
Settings options to reflect the current Color settings on the Fiery.
To access the Expert Color Settings options, click the Expert
Settings tab in the ColorWise print option bar of the Fiery printing
tab of your printer driver. For more information, see Chapter 1 of
the
Color Guide.
To set up Two-Way Communication for PostScript
or PCL printer drivers for Windows
2000/XP/Server 2003
1. In the Installable Options (PS) or Device Options (PCL) tab, select Two-
Way Communication.
2. Type the ES3640e MFP’s IP address or DNS name.
3. In the PS driver, to display the ES3640e MFP’s current default settings
when opened, select Update Fiery Driver When Opened.
4. Click Update.
5. In the PS driver, to receive an e-mail notification after your job has been
printed, select Enable E-mail Notification, and type in the e-mail address
to which notification should be sent.
You will also receive e-mail notification of any errors that occur
during printing.
Note:Enable E-mail Notification is displayed only if Email Service
is enabled at Setup.
ES3640e MFP EFI User’s Software Installation Guide - 48
Download from Www.Somanuals.com. All Manuals Search And Download.
1-49 Setting up PostScript or PCL printing with Windows
1
6. Click OK.
Completing the Windows 2000/XP/Server 2003
printer connection
To print from Windows 2000/XP/Server 2003, you must:
• Set up network servers, if any.
• Set up the Fiery to accept print jobs from your computer.
• Configure a port on each Windows 2000/XP/Server 2003
computer for the network type.
To do this
Configure the parallel
connection
2000/XP/Server 2003 parallel port
Configure the TCP/IP (LPR port)
connection
2000/XP/Server 2003 TCP/IP and
Port 9100 or LPR connection” on
page 1-51.
Configure the IPX (Novell)
connection
“Completing the Windows
2000/XP/Server 2003 IPX (Novell)
connection” on page 1-52.
Note:The procedures for completing the printer connection for
Windows 2000/XP and Windows Server 2003 are similar.
Windows 2000 illustrations are used in the following procedure,
with relevant Windows XP differences noted.
ES3640e MFP EFI User’s Software Installation Guide - 49
Download from Www.Somanuals.com. All Manuals Search And Download.
1-50 Installing User Software on a Windows Computer
1
Completing the Windows 2000/XP/Server 2003 parallel
port connection
The parallel port cable connects the Fiery to a single computer.
Once you have installed the Windows 2000/XP/Server 2003
PostScript printer driver and the Fiery printer description files,
complete the setup for parallel port printing.
To set up parallel printing for Windows
2000/XP/Server 2003
1. Windows 2000: Click Start, choose Settings, and then choose Printers.
Windows XP: Click Start, and choose Printers and Faxes.
Windows Server 2003: Click Start, choose Control Panel, and then choose
Printers and Faxes.
2. Double-click the Fiery icon and choose Properties from the Printer menu.
In the Ports tab, confirm that LPT1 (Local Port) is selected.
The Fiery is ready to accept parallel print jobs from your
computer, using the Windows 2000/XP/Server 2003 PostScript
printer driver and the Fiery printer description file.
3. Click the General tab and click Print Test Page.
4. To share the printer on the network, click the Sharing tab.
Select whether to share the printer, and specify the operating
systems used by
network clients.
5. Click OK to exit the Printer Properties dialog box.
ES3640e MFP EFI User’s Software Installation Guide - 50
Download from Www.Somanuals.com. All Manuals Search And Download.
1-51 Setting up PostScript or PCL printing with Windows
1
Completing the Windows 2000/XP/Server 2003 TCP/IP
and Port 9100 or LPR connection
Note:If you installed the driver from the Drivers CD (CD1), this
procedure is not necessary. TCP/IP connection will have been set
up automatically during the installation.
Once you have installed the PostScript and printer driver files,
complete the setup for the TCP/IP and LPR connection as follows:
• Prepare the Fiery to accept print jobs using TCP/IP and LPR
protocols. For details, see Chapter 2 of the Configuration Guide.
• Install OKI LPR software utility from the Drivers CD (CD1).
• Run OKI LPR and add the printer by discovery on the network.
(See the Help screens with the OKI LPR utility.)
Before you continue, contact the system administrator for the IP
address assigned to the Fiery, as well as the subnet mask and the
gateway address, if they are used.
The TCP/IP protocol should already be installed on the Windows
2000/XP/Server 2003 workstation.
Note:You can also set up the LPR connection by installing Print
Services for UNIX, which is supplied as an add-on Windows
component with your Windows 2000/XP/Server 2003 CD. For
more information, see your Windows documentation.
To set up TCP/IP and Port 9100 or LPR connection
for Windows 2000/XP/Server 2003
1. Insert the Drivers CD (CD1) and wait for the CD Installer to autorun.
If the setup program does not start after a minute or so, navigate
to the CD top level directory and run setup.exe.
2. Choose you preferred installer language and wait for main installer screen
to appear. If necessary, click Accept when prompted to accept the licence
conditions.
ES3640e MFP EFI User’s Software Installation Guide - 51
Download from Www.Somanuals.com. All Manuals Search And Download.
1-52 Installing User Software on a Windows Computer
1
3. Follow the directions of the main installer screen to install OKI LPR and
then the OKI Network Extension from the available software utilities.
4. When installation if complete, exit the CD Installer program.
5. Reboot the computer and then run OKI LPR either from the Programs
menu or from its icon in the system tray (bottom right, near the clock).
6. Choose Add Printer from the Remote Print menu (see OKI LPR on-line
help).
7. Choose your ES3640e MFP installed driver from the Printer Name drop-
down list.
8. Enter the IP address of the ES3640e MFP if you have it, or click the
Discover button to search the network and choose your printer.
If your printer is connected via DHCP the OKI LPR utility will still
find it if its IP address changes next time it is rebooted.
Completing the Windows 2000/XP/Server 2003 IPX
(Novell) connection
Complete the setup for the IPX (Novell) connection as follows:
• Configure the Novell network and file server for handling Fiery
print jobs. The file server should be configured with a print
server and print connection for the Fiery. For details, see your
NetWare documentation.
• Prepare the Fiery for IPX printing.
• Set up the IPX connection on the computer.
NetWare protocols (NWLink IPX/SPX Compatible Transport) and
NetWare client services should already be installed on the
Windows 2000/XP/Server 2003 computer.
ES3640e MFP EFI User’s Software Installation Guide - 52
Download from Www.Somanuals.com. All Manuals Search And Download.
1-53 Setting up PostScript or PCL printing with Windows
1
To set up IPX (Novell) printing for Windows
2000/XP/Server 2003
1. Windows 2000: Double-click My Network Places.
Windows XP: Click Start, and then click My Network Places.
Windows Server 2003: Click Start, choose Explorer, and then click My
Network Places.
2. Double-click NetWare or Compatible Network.
A list of NetWare servers appears.
3. Double-click the NetWare Tree or File Server on which the network
administrator defined a print connection for the Fiery.
You may have to log in to the file server to see the print
connections.
4. Double-click the print connection defined for the Fiery.
5. If the NetWare server does not have a suitable driver for the Fiery, you
may be asked if you want to set up the printer on your computer. Click
Yes.
6. Click OK to install the Fiery PostScript printer driver.
7. Follow the procedure that starts with step 6 on page 1-17.
When installation is complete, a new printer window appears, with
the name of the print queue on the NetWare server.
8. Choose Properties from the File menu and click the Ports tab.
ES3640e MFP EFI User’s Software Installation Guide - 53
Download from Www.Somanuals.com. All Manuals Search And Download.
1-54 Installing User Software on a Windows Computer
1
Verify that the connection to the NetWare queue is listed and
selected as a port for the Fiery.
9. Click the General tab and click Print Test Page.
10. In the printer Job Notes field, type user and job identification information
and
click OK.
The Test page remains listed in the queue window until it is
printed.
The Fiery polls the NetWare server for print jobs in the print
connection defined for the Fiery. When you print, your PostScript
files are spooled to that connection and transmitted over the
queue “port” to the Fiery.
Setting up SMB printing on Windows 2000/XP/Server 2003
SMB printing (also known as Windows printing) allows you to
install the printer driver and associated files, and print from your
computer to a particular print connection (Hold, Print, or Direct)
on the Fiery. These instructions assume you have installed the
TCP/IP protocol and Client for Microsoft Networks.
ES3640e MFP EFI User’s Software Installation Guide - 54
Download from Www.Somanuals.com. All Manuals Search And Download.
1-55 Setting up PostScript or PCL printing with Windows
Each connection (Hold, Print, or Direct) requires a new printer
driver and printer description file. To set up printing to a second or
third print connection, repeat the procedure, “To set up SMB
printing on Windows 2000/XP/Server 2003”. If you install more
than one printer, give each a descriptive name during printer
driver installation, such as Aero-Print or Aero-Hold, so you can
easily identify printers.
Before you begin
•
Configure the Fiery for SMB printing in Network Setup>Service
Setup>Windows Setup.
SMB printing is referred to as Windows Printing in Setup, on the
Control Panel Map, and on the Configuration page. For more
information, see Chapter 2 of the Configuration Guide.
To set up SMB printing on Windows
2000/XP/Server 2003
1. Open My Network Places.
2. Browse for the printer you want to print to.
The printer name you are browsing for is the name entered in
Network Setup> Service Setup>Windows Setup>Server Name.
For this information, see the Configuration page.
The amount of network traffic determines the amount of time
required for the Browse function.
Note:You can also locate the printer using the Search feature on
your Windows computer. Right-click My Network Places and click
Search for Computers. Type the name of the printer and click
Search Now.
If you are not able to locate your Fiery, contact your network
administrator.
3. Double-click the name of the Fiery to display enabled print connections.
4. Double-click the print connection you want to print to.
ES3640e MFP EFI User’s Software Installation Guide - 55
Download from Www.Somanuals.com. All Manuals Search And Download.
1-56 Installing User Software on a Windows Computer
The printer files are downloaded from the Fiery and the print
connection is set up.
For more information, see “To install the PostScript or PCL printer
driver for Windows 2000/XP/Server 2003” on page 1-44.
ES3640e MFP EFI User’s Software Installation Guide - 56
Download from Www.Somanuals.com. All Manuals Search And Download.
1-57 Setting up PostScript or PCL printing with Windows
1
Setting up IPP printing with Windows 2000/XP/Server
2003
With Internet Printing Protocol (IPP), print jobs are sent to the
Fiery over the Internet.
2003 computers. IPP printing is not supported on Windows
NT 4.0.
Note:The IPP setup procedures are performed after installing the
appropriate printer drivers (see “To install the PostScript or PCL
printer driver for Windows 2000/XP/Server 2003” on page 1-44).
Before you begin
1. Prepare the Fiery for TCP/IP printing.
2. Make sure the Fiery is configured for IPP printing. For more information,
see Chapter 4 of the Configuration Guide.
3. Specify the printing destination on your computer.
To set up IPP printing with Windows
2000/XP/Server 2003
1. Windows 2000: Click Start, choose Settings, and then choose Printers.
Windows XP: Click Start and choose Printers and Faxes.
Windows Server 2003: Click Start, choose Control Panel, and then choose
Printers and Faxes.
2. Windows 2000: Double-click the Add Printer icon and click Next.
Windows XP: Click Add Printer.
Windows Server 2003: Choose Add a printer
3. Select Network printer and click Next.
ES3640e MFP EFI User’s Software Installation Guide - 57
Download from Www.Somanuals.com. All Manuals Search And Download.
1-58 Installing User Software on a Windows Computer
1
4. Select “Connect to a printer on the Internet or on your intranet.” Type an
IP address or computer name in the URL field.
The URL for the printer is the IP address or DNS name followed by
“ipp” and the connection you want to print to (print, hold, or
direct). Insert slashes between the different elements.
5. Click Next.
The Connect to Printer dialog box appears.
6. Click OK.
The Add Printer Wizard dialog box appears.
7. If you are installing the PostScript printer for Windows 2000/XP/Server
2003 for the first time, follow the procedure described on page 1-44.
If you have already installed the printer driver on your computer,
choose the appropriate names from the Manufacturers and
Printers lists and click OK.
8. Indicate whether you want to make the Fiery the default printer and
click Next.
9. Click Finish.
ES3640e MFP EFI User’s Software Installation Guide - 58
Download from Www.Somanuals.com. All Manuals Search And Download.
1-59 Installing EFI Fiery Mail Port
1
Installing EFI Fiery Mail Port
The E-Mail Service provides a method to print and control the
ES3640e MFP remotely. Jobs are sent to the ES3640e MFP in the
form of e-mail attachments. You can set up e-mail printing on
Windows computers by adding the EFI Fiery Mail Port software as
a printer port.
To set up the Fiery for e-mail printing, see Chapter 4 of the
Configuration Guide. After Setup has been performed, install the
software from the Utilities CD (CD2) onto your Windows
computer, and then add a port.
Note:Procedures are given for Windows 98/Me and
Windows NT 4.0. Procedures for Windows 2000/XP/Server 2003
are similar to those for Windows NT 4.0.
To install the e-mail port monitor on Windows
computers
1. Insert the Utilities CD (CD2) supplied with your ES3640e MFP into your
CD drive.
Normally the Installer program should autorun. If it does not,
navigate to the top level directory window of the CD and run
setup.exe.
2. Select Fiery Utilities.
3. Click on Install Fiery Mail Port and follow the on-screen prompts to install
the mail port to your computer.
ES3640e MFP EFI User’s Software Installation Guide - 59
Download from Www.Somanuals.com. All Manuals Search And Download.
1-60 Installing User Software on a Windows Computer
1
When installation is complete, you are ready to configure the
connection for the e-mail port monitor.
To configure the connection for EFI Fiery Mail Port
1. Click Start, choose Settings, and then choose Printers.
2. In the Printers window, right-click the icon for the Fiery printer driver.
For instructions on installing the printer driver, see “Installing the
PostScript or PCL printer driver for Windows 98/Me” on
page 1-17.
3. Choose Properties, and click the Details tab.
4. Click Add Port.
5. Click Other and select EFI Fiery Mail from the list of ports.
6. Click OK.
ES3640e MFP EFI User’s Software Installation Guide - 60
Download from Www.Somanuals.com. All Manuals Search And Download.
1-61 Installing EFI Fiery Mail Port
1
7. Enter the basic information required to set up the e-mail port.
Fiery’s E-mail Address—Enter the e-mail address of the ES3640e
MFP.
Outgoing Mail Server—Enter the name or IP address of the SMTP
server for the port monitor to use.
8. Click Advanced.
The E-Mail Port Configuration dialog box appears.
9. Enter the following information.
For Fiery Server:
E-mail Address—The e-mail address of the ES3640e MFP.
Queue—The print connection on the Fiery that you want.
ES3640e MFP EFI User’s Software Installation Guide - 61
Download from Www.Somanuals.com. All Manuals Search And Download.
1-62 Installing User Software on a Windows Computer
1
For Outgoing Mail Server (SMTP):
Server Name—The SMTP server to use.
From Address—The “from” address to insert in the e-mail.
For Options:
Break apart messages larger than—The maximum size of a single
e-mail message is displayed. If a job exceeds this size, it is split
into multiple messages, each not exceeding this size.
Status messages from Fiery—When enabled, the Status option
requests the Fiery to send status reports of the job via e-mail.
10. Click OK.
The name assigned to the EFI Fiery Mail Port appears in the
Details tab of the Fiery printer driver.
11. Click Apply, and then click OK.
The connection for the EFI Fiery Mail Port has now been
configured.
To configure the connection for the EFI Fiery Mail
port on Windows NT 4.0
1. Click Start, choose Settings, and then choose Printers.
2. In the Printers window, double-click the Add Printer icon and click Next.
3. Specify printing using a Local printer and click Next.
4. In the window displaying a list of ports, click Add Port.
The Printer Ports dialog box is displayed, with the EFI Fiery Mail
port listed as one of the available ports.
ES3640e MFP EFI User’s Software Installation Guide - 62
Download from Www.Somanuals.com. All Manuals Search And Download.
1-63 Installing EFI Fiery Mail Port
1
5. Select EFI Fiery Mail and click New Port.
The Add Port dialog box appears.
6. Enter the basic information required to set up the e-mail port.
Fiery’s E-mail Address—Enter the e-mail address of the ES3640e
MFP.
Outgoing Mail Server—Enter the name or IP address of the SMTP
server for the port monitor to use.
7. Click Advanced.
The E-Mail Port Configuration dialog box appears.
ES3640e MFP EFI User’s Software Installation Guide - 63
Download from Www.Somanuals.com. All Manuals Search And Download.
1-64 Installing User Software on a Windows Computer
1
8. Enter the following information.
For Fiery Server:
E-mail Address—The e-mail address of the Fiery.
Queue—The print connection on the Fiery that you want.
For Outgoing Mail Server (SMTP):
Server Name—The SMTP server to use.
From Address—The “from” address to insert in the e-mail.
For Options:
Break apart messages larger than—The maximum size of a single
e-mail message is displayed. If a job exceeds this size, it is split
into multiple messages, each not exceeding this size.
Status messages from Fiery—When enabled, the Status option
requests the Fiery to send status reports of the job via e-mail.
9. Click OK.
The Add Printer Wizard dialog box appears.
10. Click Next and follow the instructions for installing the printer driver for
your Windows computer.
ES3640e MFP EFI User’s Software Installation Guide - 64
Download from Www.Somanuals.com. All Manuals Search And Download.
1-65 Installing Fiery utilities
1
Installing Fiery utilities
From the CD2, you can install the following Fiery utilities and
• ColorWise Pro Tools
• Fiery Downloader
• EFI Fiery Mail Port (see “Installing EFI Fiery Mail Port” on
page 1-59)
• Command WorkStation
• Fiery Remote Scan
The Fiery utilities must be separately installed on each user’s
computer. The installation of each utility is similar. Before you
begin each installation, determine where you want to install each
item on your hard disk. Otherwise, the software is placed by
default in the Fiery folder inside the Programs folder. The
Command WorkStation installer also installs the Java files
necessary to use Fiery Setup from Command WorkStation.
Note:To install software, you must have Service Pack 4 installed
on a Windows 2000 computer and Service Pack 1 installed on
Windows XP. If not, a warning message alerts you to install the
correct service pack.
To use Fiery software (Command WorkStation and ColorWise Pro
install the Sun Java file, Java Runtime Environment (JRE),
provided in the CommonUtl folder on the User Software CD. If the
Sun Java file is not installed, you are prompted to install it before
you proceed to install Fiery software. For more information on
installing Java Runtime Environment (JRE), see “To install Sun
Java on your computer” on page 1-66. For more information on
WebTools, see the Job Management Guide and the Printing Guide.
ES3640e MFP EFI User’s Software Installation Guide - 65
Download from Www.Somanuals.com. All Manuals Search And Download.
1-66 Installing User Software on a Windows Computer
1
To install Sun Java on your computer
1. When the dialog box prompting you to install Java Runtime Environment
(JRE) appears, click OK to proceed with installation.
2. Click Yes in the License Agreement dialog box.
3. Select Typical for Setup Type and click Next.
4. When installation of Java Runtime Environment (JRE) files is complete,
click Finish and follow the instructions for installing Fiery software in “To
install Fiery utilities” on page 1-67.
After installation of the Sun Java files, a Java Web Start shortcut is
created on your computer desktop. This is not intended for use
with Fiery software, so you may delete the shortcut if you wish.
ES3640e MFP EFI User’s Software Installation Guide - 66
Download from Www.Somanuals.com. All Manuals Search And Download.
1-67 Installing Fiery utilities
1
To install Fiery utilities
1. Insert the Utilities CD (CD2) supplied with your ES3640e MFP into your
CD drive.
Normally the Installer program should autorun. If it does not,
navigate to the top level directory window of the CD and run
setup.exe.
2. Select Fiery Utilities.
3. Click on the name of the utility you wish to install.
Click on the “Tell me more” links to see a description of each
utility.
4. Follow the instructions in the Setup dialog boxes to complete installation.
ES3640e MFP EFI User’s Software Installation Guide - 67
Download from Www.Somanuals.com. All Manuals Search And Download.
1-68 Installing User Software on a Windows Computer
1
Using Fiery utilities for the first time
Before you can use the newly installed software, you must
configure the connection to the Fiery.
Configuring the connection for Fiery utilities
The first time you start one of the Fiery utilities, you must
configure the connection to the Fiery. Similar configuration is used
the other connections. Configuration for most Fiery utilities is
described in the following procedure.
For configuration of specific Fiery utilities, see “Configuring the
connection for Command WorkStation” on page 1-70.
Before you begin
•
Print the Configuration page from the ES3640e MFP Control Panel.
This page contains information you need when configuring the
connection, such as the IP address. For TCP/IP installations, you
can use the DNS name of the Fiery instead of the IP address.
Make sure the Fiery is already registered in a Domain Name
Server (DNS) on your network. For more information, see your
Windows system documentation.
To configure the connection for Fiery utilities
1. Start the utility for which you want to configure a connection.
For details, see the Printing Guide.
2. If the No Servers Configured dialog box appears, click OK.
If the Choose Printer Device dialog box appears, click Add.
3. Enter the appropriate information for the Fiery.
Nickname—Enter a name for the Fiery. This name does not have
to match the actual Server Name of the Fiery.
ES3640e MFP EFI User’s Software Installation Guide - 68
Download from Www.Somanuals.com. All Manuals Search And Download.
1-69 Using Fiery utilities for the first time
1
Note:The nickname cannot contain any of the following seven
characters:
[ ] _ " ' <space> <tab>
Protocol—Choose the type of network protocol you are using from
the menu.
Note:Fiery utilities are not supported over IPX/SPX. Command
WorkStation is supported on Windows computers over TCP/IP.
Server Name—Enter the IP address (or DNS name) of the
ES3640e MFP.
New Device—Enter the name of the device the Fiery is installed
in: ES3640e MFP.
Note:Type ES3640e MFP exactly as shown because the device
name is case-sensitive.
4. When you have entered all the information, click Add.
5. With the device name (ES3640e MFP) selected in the Devices list, click
OK.
The Fiery appears in the list of available servers. The first line of
the entry displays the nickname you gave the server, followed by
the protocol you chose. The second line displays the device name.
Device name of the
Fiery (ES3640e MFP)
6. With the device name selected in the list of Available Servers, click Select
to begin using the utility.
ES3640e MFP EFI User’s Software Installation Guide - 69
Download from Www.Somanuals.com. All Manuals Search And Download.
1-70 Installing User Software on a Windows Computer
1
Modifying the configuration
Edit the configuration whenever there is any change to your Fiery
server or network, such as a server name or IP address. If you
change Fiery Setup information, do so before reconfiguring the
connection.
To modify the configuration
1. To edit information for a Fiery in the list of available servers, select the
Fiery by its nickname and click Modify.
2. Make the necessary changes in the Modify Server Settings dialog box and
click OK.
3. To add a new Fiery to the list of available servers, click Add. Configure the
Add New Server dialog box as outlined in steps 3 through 5 in the
previous procedure.
4. To remove a Fiery, select the Fiery by its nickname and click Remove.
Note:The nickname cannot be modified.
Configuring the connection for Command
WorkStation
The first time you start Command WorkStation, you are prompted
to configure the connection to the Fiery.
To configure the connection for Command
WorkStation
1. Print a Configuration page.
The information on this page helps you locate the Fiery, if it is not
on the same local subnet as your computer.
2. Start Command WorkStation.
The Available Servers dialog box appears. All servers found in the
local subnet are displayed.
ES3640e MFP EFI User’s Software Installation Guide - 70
Download from Www.Somanuals.com. All Manuals Search And Download.
1-71 Using Fiery utilities for the first time
1
3. If no Fiery servers were found, click the Manual tab to search by DNS
name
or IP address. Click Add to add the server to the Available Servers list.
4. Click the Auto Search tab and then click Advanced to search by either a
range of IP addresses or the IP address and subnet mask.
ES3640e MFP EFI User’s Software Installation Guide - 71
Download from Www.Somanuals.com. All Manuals Search And Download.
1-72 Installing User Software on a Windows Computer
1
5. Click Search.
All available servers appear in the Available Servers list.
6. Select the Fiery server you want to use and click Add.
The selected Fiery server appears in the Login Server dialog box.
7. Click the server name.
ES3640e MFP EFI User’s Software Installation Guide - 72
Download from Www.Somanuals.com. All Manuals Search And Download.
1-73 Using Fiery utilities for the first time
1
The Log In dialog box appears.
8. Select Administrator, Operator, or Guest and click Log In.
Your computer is connected to the server.
Modifying the configuration
Edit the configuration whenever there is any change to your Fiery
server or network, such as a server name or IP address. If you
change Fiery Setup information, do so before reconfiguring the
connection.
To modify the configuration
1. Start Command WorkStation.
The Login Server window appears.
and click Remove.
The Available Servers dialog box appears.
3. To add the modified Fiery server, follows steps 3 through 6 of the
procedure,
“To configure the connection for Command WorkStation” on page 1-70.
ES3640e MFP EFI User’s Software Installation Guide - 73
Download from Www.Somanuals.com. All Manuals Search And Download.
1-74 Installing User Software on a Windows Computer
1
To modify the connection to the Fiery, you must remove the
server from the Login Server list and follow the procedure for
configuring the connection.
ES3640e MFP EFI User’s Software Installation Guide - 74
Download from Www.Somanuals.com. All Manuals Search And Download.
1-75 Installing Color files from the User Software CD
1
Installing Color files from the
User Software CD
You can copy additional Color files from the User Software CD to
download and print using Fiery Downloader.
ICC folder
ICC monitor settings file and a device profile specially
designed for use with the Fiery and particular printer
models. For instructions on installing, see “Installing
the ICC profiles on a Windows computer” on
page 1-76.
Clrfiles folder
(inside the
English
Cmyk.ps, an 11-page, letter-size PostScript file to use
for reference when defining CMYK Colors in
applications.
folder)
Pantone.ps, a 19-page, letter-size PostScript file that
indicates the closest equivalent of PANTONE coated
Colors that the Fiery and your ES3640e MFP can
produce. The method used to print the Pantone.ps file
differs depending on the Spot Color Matching setting.
For more information, see the Printing Guide and the
Color Guide.
Rgb_01.doc, a file you can print from Microsoft Word
97 or later to view available RGB Colors.
Rgb_02.ppt, a file you can print from PowerPoint 6.0 or
later to view available RGB Colors.
Calibrat
folder
(inside the
English\Clrfil
es folder)
Four PostScript files of Color patches for obtaining
measurements: Custom21.ps, Custom34.ps,
Stand21.ps, and Stand34.ps. The numbers in the file
names refer to the number of patches on the page. The
Custom files allow you to download measurement
patches that incorporate the printer’s current
calibration set. The Standard files allow you to
download standard measurement patches that bypass
the printer’s current calibration set. For information on
using these files, see the
Color Guide.
Note: These files are provided for expert users and
should not be used for day-to-day calibration.
ES3640e MFP EFI User’s Software Installation Guide - 75
Download from Www.Somanuals.com. All Manuals Search And Download.
1-76 Installing User Software on a Windows Computer
1
Installing the ICC profiles on a Windows
computer
The ICC profiles included in the Icm folder on CD2 are for use
with ColorWise Pro Tools. You can also use the ICC profiles with
applications that support ICC standards, such as Photoshop. For
most ICC-aware applications, the files must be installed in a folder
named Color in the System folder. For use with ColorWise Pro
Tools, you can copy the files to a folder of your choice.
You can upload additional ICC profiles with the Profile Manager in
ColorWise ProTools. For more information on uploading and using
ICC profiles with ColorWise Pro Tools, see Chapter 1 of the
Color Guide.
To install the ICC profiles on a Windows computer
1. On CD2, open the ICC folder.
To access this folder click Start>Run, and enter D:\ICC (where D:
is the drive letter of your CD drive). If the Installer autoruns when
you load the CD, click Exit to close it.
2. If you are using Windows 98/Me, copy the profiles to the
Windows\System\Color folder on your hard disk.
If you are using Windows NT or Windows 2000, copy the profiles to the
Winnt\System32\Color folder on your hard disk.
Note:If a folder named “Color” does not exist in the System32
folder, create one and install the profiles into it.
If you are using Windows XP/Server 2003, right-click the profile you want
and click Install Profile.
Note:The profiles are installed automatically to the
Windows\System32\spool\ drivers\color folder on your hard disk.
Loading the monitor settings file
The Efirgb.icm monitor settings file can be used in Photoshop, or
other applications that support ICC profiles, to define a source
ES3640e MFP EFI User’s Software Installation Guide - 76
Download from Www.Somanuals.com. All Manuals Search And Download.
1-77 Installing Color files from the User Software CD
1
Color space for printing to the ES3640e MFP.
These instructions assume you have installed the ICC profiles
included on CD2. For more information, see the preceding section.
Note:The internal name of an ICC profile may vary slightly from
its file name.
To load the RGB Working Space profile for
Photoshop 5.x
1. Start Photoshop.
2. Choose Color Settings from the File menu and choose RGB Setup from
the Color Settings submenu.
3. In the RGB Setup dialog box, click Load.
4. For Windows 98/Me, browse to the Windows\System\Color folder, select
Efirgb.icc, and then click Load.
ES3640e MFP EFI User’s Software Installation Guide - 77
Download from Www.Somanuals.com. All Manuals Search And Download.
1-78 Installing User Software on a Windows Computer
1
For Windows NT 4.0 or Windows 2000, browse to the
Winnt\System32\Color folder, select Efirgb.icc, and then click Load.
For Windows XP/Server 2003, browse to the Win-
dows\System32\spool\driver\color folder, select Efirgb.icc, and then click
Load.
The Efirgb v1f file is displayed in the RGB menu of the RGB Setup
dialog box.
5. Click OK.
For more information about ICC profiles, see your Photoshop
documentation.
Loading the ICC printer device profile
printer.
These instructions assume you have installed the ICC profiles
included on CD2. For more information, see “Installing the ICC
profiles on a Windows computer” on page 1-76.
Note:The internal name of an ICC profile may vary slightly from
its file name.
To load the ICC printer device profile in
Photoshop 5.x
1. Start Photoshop.
2. Choose Color Settings from the File menu and choose CMYK Setup from
the Color Settings submenu.
3. In the CMYK Setup dialog box, choose ICC as the CMYK color model.
4. Select the profile that corresponds to the Fiery from the Profile menu.
ES3640e MFP EFI User’s Software Installation Guide - 78
Download from Www.Somanuals.com. All Manuals Search And Download.
1-79 Installing Color files from the User Software CD
1
5. Click OK.
For more information about ICC profiles, see your Photoshop
documentation.
Loading monitor settings files and ICC device profiles in
Photoshop 6.x
Once you have installed the Efirgb.icc monitor settings file and the
ICC device profile for the Fiery, they can be loaded at the same
time in Photoshop 6.x.
To load the monitor settings file and ICM device
profile in Photoshop 6.x
1. Start Photoshop.
2. Choose Color Settings from the Edit menu and select Advanced Mode in
the Color Settings dialog box.
3. Choose EFI RGB from the RGB menu.
4. Choose the profile that corresponds to the Fiery from the CMYK menu.
ES3640e MFP EFI User’s Software Installation Guide - 79
Download from Www.Somanuals.com. All Manuals Search And Download.
1-80 Installing User Software on a Windows Computer
1
Installing the printer description files for
Windows
The User Software CD contains printer description files for popular
Windows applications. Adobe Pagemaker 5.0, 6.x, and 7.0 do not
support automatic installation of printer description files from the
Printers or Printers and Faxes Control Panel. To make the Fiery
available in the Print and Page Setup dialog boxes of this
application, copy printer description files to the appropriate
location.
To copy the printer description files
1. On the User Software CD, open the English\Prntdrvr\Ps_drvr folder.
Select the folder that corresponds to the system you are using.
For Windows 98/Me, select \Drivers\<language>\Win9x\ps.
For Windows NT 4.0, select \Drivers\<language>\nt4\ps.
For Windows 2000/XP/Server 2003, select
\Drivers\<language>\Win2k_xp\ps.
2. Copy the printer description file “EF8X3324.PPD” to the appropriate
location.
If you use
To this location
PageMaker 5.0
PageMaker 6.0
\ALDUS\USENGLSH\PPD4
\PM6\RSRC\USENGLSH\PPD
4
For PageMaker
6.5
\PM65\RSRC\USENGLSH\PP
D4
For PageMaker
7.0
\PM7\RSRC\USENGLSH\PPD
4
ES3640e MFP EFI User’s Software Installation Guide - 80
Download from Www.Somanuals.com. All Manuals Search And Download.
2-81 Setting up the ES3640e MFP as a PostScript printer
2
The general steps for installing the Fiery user software and setting
up printing on a Mac OS computer are as follows:
Chapter 2:
Installing
User Software
on a Mac OS
Computer
• Install the PostScript printer driver and printer description file.
• Set up the ES3640e MFP in the Chooser (Mac OS 9 or Mac OS X
Classic mode) or in the Print Center (Mac OS X Native mode).
Note:The “Print Center” is called “Printer Setup Utility” in
OS X 10.3 and above.
• Install the Fiery utilities (Fiery Remote Scan, ColorWise Pro
Tools, Fiery Downloader, Command WorkStation LE, and
Fiery Spooler).
• Configure the connection for Fiery utilities.
• Install the printer and screen fonts.
• Install the ColorSync profiles.
• Install additional color reference and application-specific files.
Setting up the ES3640e MFP as a PostScript
printer
To set up the ES3640e MFP as a PostScript printer, you must
install the PostScript printer driver and the printer description file
that corresponds to your printer. The PostScript printer driver and
printer description files are provided on the Driver CD (CD1).
Printer drivers provide a way to communicate information on print
jobs between your applications, the ES3640e MFP, and any other
PostScript printer connected to your computer.
Setting up Mac printer drivers and printer
description files
Detailed instructions for Mac OS 9 are provided on CD1 in the
Mac OS 9:<language> folder.
ES3640e MFP EFI User’s Software Installation Guide - 81
Download from Www.Somanuals.com. All Manuals Search And Download.
2-82 Installing User Software on a Mac OS Computer
2
Detailed instructions for Mac OS X are provided on CD1 in the
Mac OS X folder.
Installing Fiery software and fonts
The Mac OS installers function essentially the same for each type
of software. Before you begin each installation, determine where
you want to install each item on your hard disk. Otherwise, the
software is placed by default as follows:
• ColorSync profiles—ColorSync Profiles folder
For ColorSync 2.5, copy the profiles from the Extras:ColorSync
Profiles folder on CD2 into the ColorSync Profiles folder inside
your System folder.
• Fiery Spooler, Fiery Downloader, Command WorkStation LE, and
ColorWise Pro Tools—“Fiery” folder
• Fonts—System folder:Fonts folder
Mac fonts corresponding to those resident on the ES3640e MFP
are provided on CD1 in the Extras:Fonts:OS 9 and
Extras:Fonts:OS X folders. These can be installed on your Mac
for use in applications.
To install Mac OS software
1. Insert the Utilities CD (CD2) in the CD drive and double-click the Installer
icon of the item you want to install, and then follow the instructions in the
installer dialog boxes.
2. If prompted, click Quit to close the software installer.
In order to use ColorWise Pro Tools, Fiery Link, or Fiery Spooler,
you must have Mac OS Runtime for Java (MRJ) installed on your
computer.
If you do not have the appropriate MRJ installed, the installer
automatically initiates the MRJ installation process.
ES3640e MFP EFI User’s Software Installation Guide - 82
Download from Www.Somanuals.com. All Manuals Search And Download.
2-83 Installing Fiery software and fonts
2
The respective installer prompts the MRJ installation from the CD.
MRJ 2.2.5 is provided on the Utilities CD (CD2). We recommend
that you use the version of MRJ provided on the Utilities CD with
the Fiery software.
If you have a newer version of MRJ (such as 2.2.6) already
installed on your computer and experience some difficulty using
the Fiery software, either remove or relocate the MRJ files
currently installed and reinstall the version of MRJ provided on
CD2. Use the following procedure to uninstall MRJ.
To uninstall Mac OS Runtime for Java
1. Locate the System Folder on your hard disk.
2. Inside the Extensions folder, locate MRJ Libraries and remove it or move it
to another folder.
Note:If you find the “MRJ Enabler” file under Extensions, remove
it or move it to another folder.
3. Inside the Apple Extras folder, locate Mac OS Runtime for Java, and
remove it or move it to another folder.
4. Restart your computer.
ES3640e MFP EFI User’s Software Installation Guide - 83
Download from Www.Somanuals.com. All Manuals Search And Download.
2-84 Installing User Software on a Mac OS Computer
2
Configuring a connection for ColorWise Pro Tools
The first time you use ColorWise Pro Tools, you are prompted to
configure a connection to the ES3640e MFP.
Note:ColorWise Pro Tools are supported only over TCP/IP
networks.
Before you begin
•
Print the Configuration page from the Printer Control Panel and
note the IP address of the ES3640e MFP.
Press the MENU keys until the Print Pages menu is displayed, then
press ENTER to select this menu.
Press the MENU keys until CONFIGURATION is displayed, then
press ENTER to print these pages.
The printer’s IP address is shown under Network Setup on the first
configuration page.
To configure a connection for ColorWise Pro Tools
1. Start the utility by double-clicking its icon.
The Choose Printer Device dialog box appears.
2. If you have previously configured a connection to the ES3640e MFP, you
are ready to use ColorWise Pro Tools. If you have not configured a
connection, click Add.
ES3640e MFP EFI User’s Software Installation Guide - 84
Download from Www.Somanuals.com. All Manuals Search And Download.
2-85 Installing Fiery software and fonts
2
3. Enter the appropriate information for the ES3640e MFP.
Nickname—Enter a name for the ES3640e MFP. It does not have
to match the actual server name of the ES3640e MFP.
Note:The nickname cannot contain any of the following seven
characters:
[ ] _ " ' <space> <tab>
Protocol—TCP/IP is the only supported network protocol, so no
selection is necessary.
Server Name—Enter the IP address (or DNS or hosts name) of the
Fiery.
New Device—Enter the name of the device the Fiery is installed
in: ES3640e MFP. This device name appears in the Printer Setup
section of the Configuration page.
Note:Type ES3640e MFP exactly as shown because the device
name is case-sensitive.
4. When you have added all the information, click Add.
ES3640e MFP EFI User’s Software Installation Guide - 85
Download from Www.Somanuals.com. All Manuals Search And Download.
2-86 Installing User Software on a Mac OS Computer
2
5. With the device name selected in the Devices list, click OK.
The ES3640e MFP appears in the list of available servers. The first
line of the entry displays the nickname you gave the server,
followed by the protocol. The second line displays the device
name.
6. With the device name selected in the list of Available Servers, click Select
to begin using ColorWise Pro Tools.
Device name of the
Fiery
(ES3640e MFP)
Modifying the configuration
Edit the configuration whenever there is any change in your
original configuration, such as a change of IP address. Change the
specific Fiery Setup information before using the following
procedure to configure the connection.
To modify the configuration
1. To edit information for a ES3640e MFP in the list of available servers,
select the ES3640e MFP by its nickname and click Modify. Edit information
in the Modify Server Settings dialog box as necessary, and click OK.
2. To add a new ES3640e MFP to the list of available servers, click Add.
Configure the Add New Server dialog box as outlined in steps 3 through 5
in the preceding procedure.
3. To remove a ES3640e MFP from the list of available servers, select the
Fiery by its nickname and click Remove.
ES3640e MFP EFI User’s Software Installation Guide - 86
Download from Www.Somanuals.com. All Manuals Search And Download.
2-87 Installing Fiery software and fonts
Configuring a connection for Fiery Spooler
Before you begin, print a Configuration page from the Printer
Control Panel and note the IP address of the ES3640e MFP. See
page 2-84.
To configure the connection for Fiery Spooler
1. Start the utility by double-clicking its icon.
The Chooser dialog box appears.
2. Click Option.
3. Click Add.
4. Enter the appropriate information for the ES3640e MFP.
Name—Enter the IP address (or DNS name) of the ES3640e MFP.
New Device—Enter the name of the device that the Fiery is
installed in: ES3640e MFP. This device name appears in the Printer
Setup section of the Configuration page.
Note:Type ES3640e MFP exactly as shown because the device
name is case-sensitive.
5. When you have entered all the information, click Add.
6. With the device name selected, click OK.
The ES3640e MFP appears in a list of configured servers.
Fiery name and device
name (ES3640e MFP)
7. Click OK in the Configure dialog box.
The ES3640e MFP appears in a list of available servers.
ES3640e MFP EFI User’s Software Installation Guide - 87
Download from Www.Somanuals.com. All Manuals Search And Download.
2-88 Installing User Software on a Mac OS Computer
2
Fiery name and device
name
(ES3640e MFP)
8. With the ES3640e MFP selected in the list of available servers, click OK to
begin using Fiery Spooler.
Modifying the configuration
Edit the configuration whenever there is any change to your
ES3640e MFP or network, such as an IP address or device change.
Change the specific Fiery Setup information before configuring the
connection.
To modify the configuration
1. In the Chooser dialog box, click Option.
2. To edit information for a ES3640e MFP, select the ES3640e MFP by its IP
address or DNS name and click Modify. Edit information in the Settings
dialog box as necessary, and click OK.
3. To add a new ES3640e MFP, click Add. Configure the Settings dialog box
as outlined in steps 4 through 6 in the preceding procedure.
4. To remove a ES3640e MFP, select the Fiery by its IP address or DNS
name, and click Remove.
The list of available servers reflects the modifications you have
made.
ES3640e MFP EFI User’s Software Installation Guide - 88
Download from Www.Somanuals.com. All Manuals Search And Download.
2-89 Installing Fiery software and fonts
2
Configuring a connection for Fiery Downloader
When you start Fiery Downloader, you must specify the
connection to the ES3640e MFP.
Before you begin
•
Print the Configuration page from the Printer Control Panel and
note the AppleTalk zone of the ES3640e MFP. See page 2-84.
To specify a ES3640e MFP connection
1. Double-click the Fiery Downloader icon.
2. Select the AppleTalk zone in which the ES3640e MFP is located from the
AppleTalk Zoneslist.
The available servers appear in the Serverslist.
Fiery name and device
name (ES3640e MFP)
3. Select the ES3640e MFP in the Servers list.
4. Click Connect.
The Fiery Downloader dialog box appears.
ES3640e MFP EFI User’s Software Installation Guide - 89
Download from Www.Somanuals.com. All Manuals Search And Download.
2-90 Installing User Software on a Mac OS Computer
2
For information on how to use Fiery Downloader, see the
Printing Guide.
ES3640e MFP EFI User’s Software Installation Guide - 90
Download from Www.Somanuals.com. All Manuals Search And Download.
2-91 Installing Fiery software and fonts
2
Configuring the connection for Command
WorkStation LE for Mac OS X
The first time you start Command WorkStation LE, you are
prompted to configure the connection to the ES3640e MFP.
Before you begin
•
Print the Configuration page from the Printer Control Panel and
note the IP address of the ES3640e MFP. See page 2-84.
To configure the connection for Command
WorkStation LE
1. Start Command WorkStation LE.
The Available Servers dialog box is displayed. All servers found in
the local subnet are displayed.
Note:The device name for the Fiery is ES3640e MFP.
2. If no Fiery servers were found, click the Manual tab to search by DNS
name or IP address. Click Add to add the server to the Available Servers
list.
ES3640e MFP EFI User’s Software Installation Guide - 91
Download from Www.Somanuals.com. All Manuals Search And Download.
2-92 Installing User Software on a Mac OS Computer
2
3. If no Fiery servers were found, click the Auto Search tab and then click
Advanced to search by either a range of IP addresses or the IP address
and subnet mask.
4. Click Search.
5. Select the Fiery server you want to use and click Add.
The selected Fiery server is displayed in the Login Server dialog
box.
ES3640e MFP EFI User’s Software Installation Guide - 92
Download from Www.Somanuals.com. All Manuals Search And Download.
2-93 Installing color files from CD2
2
6. Click the server name.
The Log In dialog box appears.
7. Select Administrator, Operator, or Guest and click Login.
8. If prompted, enter the password for Administrator or Operator.
Your computer is connected to the server.
To modify the Command WorkStation LE connection to the Fiery,
you must remove the server from the Login Server list and follow
the procedure for configuring the connection.
Installing color files from CD2
You can copy additional color files from the CD2 to your hard disk.
ES3640e MFP EFI User’s Software Installation Guide - 93
Download from Www.Somanuals.com. All Manuals Search And Download.
2-94 Installing User Software on a Mac OS Computer
2
Many of the files are PostScript files you can download and print
using Fiery Downloader.
The Utilities CD (CD2) contains the following color files in the
Extras folder:
ICC profiles
(inside the
ColorSync
folder)
Install the ICC profiles into the ColorSync Profiles
folder inside the System folder.
Mac Color
Files folder
(in the
CMYK Color Reference.ps, an 11-page, letter-size
PostScript file to use for reference when defining CMYK
colors in applications.
<language>
folder)
PANTONE Book.ps, a 19-page, letter-size PostScript
file that indicates the closest equivalent of PANTONE
coated colors that your ES3640e MFP can produce.
The method used to print the PANTONE Book.ps file
differs depending on the Spot Color Matching setting.
For more information, see the Printing Guide and the
Color Guide.
RGB page 01, a file you can print from Microsoft Word
97 or later to view available RGB colors.
RGB page 02, a file you can print from PowerPoint 6.0
or later to view available RGB colors.
Calibration
folder
(inside the
<language>:
Calibration
folder)
Four measurements files of color patches:
custom21.ps, custom34.ps, standard21.ps, and
standard34.ps. The numbers in the file names refer to
the number of patches on the page. The Custom files
are provided to allow you to download measurement
patches that incorporate the printer’s current
calibration set. The Standard files are provided to
allow you to download standard measurement patches
that bypass the printer’s current calibration set. For
information on using these files, see the Color Guide.
These files are provided for expert users and should
not be used for day-to-day calibration.
ES3640e MFP EFI User’s Software Installation Guide - 94
Download from Www.Somanuals.com. All Manuals Search And Download.
2-95 Installing color files from CD2
2
Loading ICC profiles
applications that support ICC standards.
These instructions assume that you have already installed the ICC
profiles included on CD2 inside the ColorSync folder. For more
information, see “Installing color files from CD2” on page 2-93.
Note:The internal name of an ICC profile may vary slightly from
its file name.
The following procedure describes installing the ICC profiles with
ColorSync 4.0. For more information about ColorSync, see your
application’s documentation.
To set the ColorSync system profile
1. Choose Control Panels:ColorSync from the Apple Menu.
2. Select EFIRGB ICC from the System Profile list.
When selected as the ColorSync system profile, EFIRGB ICC sets
the optimal source color space for printing to the Fiery. The color
space set by the EFIRGB ICC profile is the same as that set by the
EFIRGB setting of the RGB Source Profile print option.
Note:The RGB Source Profile print option setting overrides the
ColorSync system profile setting.
ES3640e MFP EFI User’s Software Installation Guide - 95
Download from Www.Somanuals.com. All Manuals Search And Download.
2-96 Installing User Software on a Mac OS Computer
2
3. Close the ColorSync dialog box.
For more information about ICC profiles, see your Photoshop
documentation.
ES3640e MFP EFI User’s Software Installation Guide - 96
Download from Www.Somanuals.com. All Manuals Search And Download.
2-97 Installing color files from CD2
2
Loading the monitor settings file
The EFIRGB ICC monitor settings file can be used in Photoshop or
other applications that support ICC profiles to define a source
color space for printing to the Fiery.
To load the monitor settings file in Photoshop 5.x
1. Start Photoshop.
2. Choose Color Settings from the File menu, and choose RGB Setup from
the Color Settings submenu.
3. In the RGB Setup dialog box, click Load.
4. Browse to the System:Preferences:ColorSync Profiles folder, select the
EFIRGB ICC file, and then click Open.
Note:If you are using ColorSync 2.5, the ColorSync profile is
located in System Folder:ColorSync Profiles.
The EFIRGB file appears as the selection.
5. Click OK.
ES3640e MFP EFI User’s Software Installation Guide - 97
Download from Www.Somanuals.com. All Manuals Search And Download.
2-98 Installing User Software on a Mac OS Computer
2
Loading the ICC printer profile
The ICC printer profile enables RGB-to-CMYK conversions that are
specific to the kind of printer you are using.
To load the ICC printer profile in Photoshop 5.x
1. Start Photoshop.
2. Choose Color Settings from the File menu and choose CMYK Setup from
the Color Settings submenu.
3. In the CMYK Setup dialog box, choose ICC as the CMYK color model.
4. Select the profile that corresponds to the Fiery from the Profile menu.
5. Click OK.
For more information about ICC profiles, see your Photoshop
documentation.
Loading monitor settings and the ICC device profile in
Photoshop 6.x/7.x
In Photoshop 6.x and 7.x, you can load the monitor settings file
and the ICC device profile at the same time.
To load the monitor settings file and the ICC
device profile in Photoshop 6.x/7.x
1. Start Photoshop.
2. Choose Color Settings from the Edit menu and then choose Advanced
Mode.
3. Choose EFI RGB from the RGB menu.
4. Choose the profile that corresponds to the Fiery from the CMYK menu.
5. Click OK.
For more information, see your Photoshop documentation.
ES3640e MFP EFI User’s Software Installation Guide - 98
Download from Www.Somanuals.com. All Manuals Search And Download.
3-99 Setting up Fiery WebTools
3
Fiery WebTools allow you to manage your Fiery remotely from the
Internet or from your company’s intranet. The ES3640e MFP has
its own home page, from which you can select a variety of
functions.
Chapter 3:
Setting Up
Fiery WebTools
For more information on using Fiery WebTools, see the
Printing Guide.
Setting up Fiery WebTools
In order for network users to access and use Fiery WebTools, you
must set specific Fiery options in Network Setup and Printer
Setup. You also must prepare each user’s computer to
communicate with the Fiery over the Internet or intranet.
For more information about Network Setup and Printer Setup, see
Chapter 4 of the Configuration Guide.
To set up client workstations to use
Fiery WebTools
1. Enable TCP/IP networking.
2. Make sure the workstation has a valid, unique IP address.
3. Make sure a supported Internet browser is installed on the
computer.
For more information on supported browsers, see “System
requirements” on page -12.
4. Make sure Java is enabled in your Internet browser.
For more information on setting up the Fiery and the network, see
the Configuration Guide.
ES3640e MFP EFI User’s Software Installation Guide - 99
Download from Www.Somanuals.com. All Manuals Search And Download.
4-100 On a Windows computer
4
This chapter provides troubleshooting tips.
Chapter 4:
Troubleshooti
ng
On a Windows computer
Setting up printing on Windows NT 4.0
or Windows 2000/XP/Server 2003 computers
If you have problems installing the ES3640e MFP with
Windows NT 4.0 or Windows 2000/XP/Server 2003, try installing
another PostScript printer (such as the Apple LaserWriter IIg),
and then install the ES3640e MFP. Installing another printer
ensures that all files are properly installed and available. For
instructions, see your Windows documentation.
For information about problems you may encounter using the
PostScript Printer Driver for Windows NT 4.0, see the Fiery Driver
help file (EF8x3324.chm) included in \Drivers\English\nt40\ps on
the Drivers CD (CD1). For Windows 2000/XP/Server 2003, see
your Windows 2000/XP/Server 2003 documentation.
Reinstalling the Adobe PostScript Printer Driver
on Windows 98/Me
If you are reinstalling the Adobe PostScript Printer Driver, delete
any previous versions and related files before installation.
For additional information about problems you may encounter
using the Adobe Printer Driver for Windows 98/Me, see the Fiery
Driver help file (EF8x3324.chm) included in
\Drivers\English\w9x\ps on the Drivers CD (CD1).
ES3640e MFP EFI User’s Software Installation Guide - 100
Download from Www.Somanuals.com. All Manuals Search And Download.
4-101 On a Mac OS computer
4
Problems with the Fiery utilities on Windows
computers
If you are experiencing problems with connections for the Fiery
utilities, try the following:
1. Make sure the TCP/IP networking protocol is enabled.
2. Make sure the connection is configured correctly for your site.
To check the current configuration, start a Fiery utility and choose
Open from the File menu. Select the ES3640e MFP and click
Modify to see current settings. If the settings are incorrect, you
can change them in this dialog box.
On a Mac OS computer
Setting up the Fiery in the Mac OS 9 Chooser
If Auto-setup does not work and you are prompted to select the
printer description file, select the appropriate Fiery file in your
System:Extensions:Printer Descriptions folder.
Installing screen fonts
If you experience problems installing the PostScript screen fonts
from CD1 to the System folder:Fonts folder, try the following:
1. Quit all applications and close all windows.
2. Create a new folder and name it “Uninstalled Fonts.”
This folder must be located outside the System folder.
3. Move fonts you are not using from the System folder:Fonts folder to the
Uninstalled Fonts folder.
4. Install the fonts from CD1 to a folder called CD fonts. Copy the fonts to
the System folder:Fonts folder.
5. Create aliases to the System folder:Fonts folder and the Uninstalled
Fonts folder.
6. Place both aliases on your desktop.
ES3640e MFP EFI User’s Software Installation Guide - 101
Download from Www.Somanuals.com. All Manuals Search And Download.
4-102 Troubleshooting
4
7. When necessary, use the aliases to open both folders and move fonts
between them.
If you have any applications running, you must quit and restart
them in order to view and use the newly installed fonts.
You can also try combining fonts from multiple suitcases into a
single suitcase.
Setting up the Fiery in the Mac OS X Print Center
If Auto-setup does not work and you are prompted to select the
printer description file, select the appropriate ES3640e MFP file on
your hard disk in the System:Library:
Printers:PPDs:Contents:Resources:language folder (for example,
en.lproj folder).
ES3640e MFP EFI User’s Software Installation Guide - 102
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuration
connecting
A
see PageMaker for Windows
C
Calibrat folder, for Windows
Chooser
connection on Windows,
configuring 1-68 to 1-70
Custom34.ps (Windows) 1-75
setting up color server
in 4-101
Clrfiles folder 1-75
Color Files folder, for Mac OS
users 2-94
ColorSync Profiles 2-82
D
DNS name 1-68, 2-87
troubleshooting fonts 4-101
contents (Mac OS) 2-81
(Windows) 1-68
E
Efirgb.icc monitor settings file for
Mac OS 2-95
installing for Mac OS 2-82
colour reference files 2-93
for Mac OS users 2-94
Command WorkStation 10
configuring the
connection 1-70
F
installing for Windows 1-65
Command WorkStation LE
configuring the connection for
Mac OS X 2-91
Fiery Downloader 1-65
installing for Windows 1-65
Fiery Spooler
configuring the connection on
Mac OS 2-87 to 2-88
ES3640e MFP EFI User’s Software Installation Guide - 103
Download from Www.Somanuals.com. All Manuals Search And Download.
I-104 Index
Fiery utilities
Fiery WebTools
Windows 1-65
Mac OS 2-82
Installing
Server 2003 1-44
Me 1-17
WebLink 11
WebSetup 11
fonts
Fonts folder 4-101
software for Mac OS 2-82
IP address 1-70
I
loading in Photoshop 4.0
on Windows 2000/XP/
Server 2003 1-57 to 1-58
on Windows 98/Me 1-32
IPX
loading in Photoshop 6.x
(Mac OS) 2-98
Server 2003 1-53 to 1-54
Windows NT 4.0 1-41
Server 2003 1-52
ICC monitor settings profile,
specifying in Photoshop
(Mac OS) 2-97
Icm folder (Windows) 1-75
Installable Options
specifying, from Windows
2000/XP printer driver 1-47
specifying, from Windows 98
printer driver 1-20
Windows NT 4.0 1-39
specifying, from Windows 98/
Me printer driver 1-20
specifying, from Windows NT
4.0 printer driver 1-36
specifying, from Windows NT
printer driver 1-36
Windows NT 4.0 1-39
J
Java 1-65, 3-99
Java Runtime Environment
(JRE) 1-65
Installers
ES3640e MFP EFI User’s Software Installation Guide - 104
Download from Www.Somanuals.com. All Manuals Search And Download.
I-105 Index
JRE, see Java Runtime
loading the ICC monitor
settings file (Mac OS) 2-98
loading the ICM device profile
settings file (Windows) 1-79
M
Mac OS
PostScript
printing from Mac OS 2-81 to
??
installing Fiery
utilities 2-81, 2-82
installing software 2-82
monitor settings file, Mac OS 2-97
Windows 1-17, 1-44
Windows 2000/XP/
Server 2003 1-44
Windows 98/Me 1-17
Windows NT 4.0 1-33 to 1-35
PostScript printing
Windows 98/Me 1-17
PowerPoint, RGB color reference
file 2-94
N
NetWare client setup
Windows NT 4.0 1-39
PPD
copying files for Windows
applications 1-80
selecting the PPD in the
Chooser 4-101
selecting the PPD in the Print
Center 4-102
P
PageMaker for Windows 1-80
PANTONE Book.ps 2-94
PANTONE.ps 1-75
parallel port
Windows 98/Me 1-22 to 1-26
PCL printer driver
Windows 98/Me 1-17 to 1-19
Photoshop 5.0
OS X 4-102
Server 2003 1-47
Windows 98/Me 1-20
Windows 98 1-20
Windows NT 1-36
Printer drivers, see PostScript
printer drivers
loading the ICC device settings
profile (Mac OS) 2-98
loading the ICC monitor
settings file (Mac OS) 2-97
loading the ICM device profile
(Windows) 1-78
loading the RGB working space
profile (Windows) 1-77
Photoshop 6.x
printer setup
loading the ICC device settings
profile (Mac OS) 2-98
Mac OS 2-81
ES3640e MFP EFI User’s Software Installation Guide - 105
Download from Www.Somanuals.com. All Manuals Search And Download.
I-106 Index
Printing
installing from, for
Mac OS 2-93
Windows 2000/XP 1-49
Windows 2000/XP/
printing
WebTools
Windows
R
RGB page 02 2-94
Rgb_01.doc 1-75
Rgb_02.ppt 1-75
copying color files 1-75
Windows 98/Me
setting up PostScript
printing 1-17
S
screen fonts 4-101
troubleshooting 4-100
printing 1-44
1-43
IPX 1-53 to 1-54
Stand21.ps (Mac OS) 2-94
Stand21.ps (Windows) 1-75
Stand34.ps (Mac OS) 2-94
Stand34.ps (Windows) 1-75
WebTools
IPX 1-41
IPX/SPX 1-39
Sun Java file 1-65
PostScript printer driver 1-33
printing requirements 1-38
troubleshooting 4-100
WINS Name Server 1-43, 1-55
Word, RGB colour reference
file 2-94
T
troubleshooting
Windows computers 4-100
U
Uninstalled Fonts folder 4-101
User Software CD
contents (Windows) 1-65
Utilities CD
ES3640e MFP EFI User’s Software Installation Guide - 106
Download from Www.Somanuals.com. All Manuals Search And Download.
|