Oki Printer 5200n User Manual

C5200n  
user's guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PREFACE  
Every effort has been made to ensure that the information in this document is complete,  
accurate, and up-to-date. The manufacturer assumes no responsibility for the results of  
errors beyond its control. The manufacturer also cannot guarantee that changes in  
software and equipment made by other manufacturers and referred to in this guide will  
not affect the applicability of the information in it. Mention of software products  
manufactured by other companies does not necessarily constitute endorsement by the  
manufacturer.  
While all reasonable efforts have been made to make this document as accurate and  
helpful as possible, we make no warranty of any kind, expressed or implied, as to the  
accuracy or completeness of the information contained herein.  
The most up-to-date drivers and manuals are available from the Oki Europe website:  
Copyright © 2004. All rights reserved.  
Oki and Microline are registered trademarks of Oki Electric Industry Company, Ltd.  
Energy Star is a trademark of the United States Environmental Protection Agency.  
Hewlett-Packard, HP, and LaserJet are registered trademarks of Hewlett-Packard  
Company.  
Microsoft, MS-DOS and Windows are registered trademarks of Microsoft Corporation.  
Apple, Macintosh, Mac and Mac OS are registered trademarks of Apple Computer.  
Other product names and brand names are registered trademarks or trademarks of  
their proprietors.  
As an Energy Star Program Participant, the manufacturer has  
determined that this product meets the Energy Star guidelines for  
energy efficiency.  
This product complies with the requirements of the Council Directives  
89/336/EEC (EMC) and 73/23/EEC (LVD) as amended where applicable  
on the approximation of the laws of the member states relating to  
electromagnetic compatibility and low voltage.  
PREFACE > 2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
CONTENTS  
Changing the display language. . . . . . . . . . . . . . . . . . . . . . . 9  
Factors that affect the appearance of prints. . . . . . . . . . . . 25  
Tips for printing in colour. . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
Printing photographic images . . . . . . . . . . . . . . . . . . . . 27  
Printing from office applications . . . . . . . . . . . . . . . . . . 27  
Printing specific colours (e.g. a company logo) . . . . . . 27  
Adjusting the brightness or intensity of a print . . . . . . 27  
Accessing the colour matching options . . . . . . . . . . . . . . . 28  
Setting the colour matching options. . . . . . . . . . . . . . . . . . 29  
Using the colour swatch feature . . . . . . . . . . . . . . . . . . . . . 30  
Using the Colour Correct Utility . . . . . . . . . . . . . . . . . . . . . . 31  
CONTENTS > 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Toner cartridge replacement . . . . . . . . . . . . . . . . . . . . . . . . 46  
Installing upgrades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63  
Duplex unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63  
Memory upgrade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65  
Second paper tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68  
Adjusting Windows printer drivers . . . . . . . . . . . . . . . . . . . 69  
Clearing paper jams. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70  
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78  
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79  
Oki contact details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81  
CONTENTS > 4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTES, CAUTIONS AND WARNINGS  
NOTE  
A note appears in this manual like this. A note provides additional  
information to supplement the main text which may help you to use and  
understand the product.  
CAUTION!  
A caution appears in this manual like this. A caution provides  
additional information which, if ignored, may result in equipment  
malfunction or damage.  
WARNING!  
A warning appears in this manual like this. A warning provides  
additional information which, if ignored, may result in a risk of  
personal injury.  
NOTES, CAUTIONS AND WARNINGS > 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INTRODUCTION  
Congratulations on buying an Oki colour printer. Your new printer is  
designed with advanced features to give you clear, vibrant colour  
prints and crisp black and white pages at high speed on a range of  
print media for the office.  
Your printer includes these features:  
>
Up to 16 pages per minute in full colour for fast printing of high  
impact colour presentations and other documents;  
>
Up to 24 pages per minute in black and white for fast and  
efficient printing of all general purpose documents not  
requiring colour;  
>
>
>
>
1200 x 600 dpi (dots per inch) print resolution for high quality  
image production showing the finest detail;  
Single Pass Colour Digital LED technology for high speed  
processing of your printed pages;  
10Base-T and 100Base-TX network connection lets you share  
this valuable resource among users on your office network;  
“Ask Oki” – a brand new, user-friendly function that gives a  
direct link from your printer driver screen (but not illustrated in  
this guide) to a dedicated web site specific to the exact model  
you are using. This is where you’ll find all the advice,  
assistance and support you could need to help you get the  
best possible results from your Oki printer.  
Additionally, the following optional features are also available:  
>
Automatic two-sided (duplex) printing for economical use of  
paper and compact printing of larger documents;  
>
Additional paper tray for loading a further 530 sheets to  
minimise operator intervention, or different paper stocks for  
letterhead stationery, alternative paper sizes or other print  
media;  
>
Additional memory allows printing of more complex pages,  
including two-sided and booklet pages with the optional  
duplex unit.  
INTRODUCTION > 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
PRINTER OVERVIEW  
FRONT VIEW  
1
7
2
7
5
6
4
3
1. Output stacker, face down.  
Standard printed copy  
4. Multi purpose feeder.  
Used for feeding heavier paper stocks,  
envelopes and other special media. Also for  
required.  
delivery point. Holds up to  
250 sheets at 80g/m².  
2. Operator panel.  
Menu driven operator  
controls and LCD display  
panel.  
5. ON/OFF switch.  
6. Front Cover release (lift).  
7. Multi purpose feeder release (2) (press).  
3. Paper tray.  
Standard blank paper tray.  
Holds up to 300 sheets of  
80g/m² paper.  
The LCD display language can be changed to show any of 14 different  
languages. (See “Changing the display language” on page 9.)  
INTRODUCTION > 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
REAR VIEW  
This view shows the connection panel, the rear output stacker and the  
location of the optional duplex (two-sided printing) unit.  
13  
10  
11  
9
12  
8
8. AC power socket.  
9. USB interface.  
10. Network status lights.  
11. Network interface.*  
12. Location of optional duplex unit.  
13. Rear, face up, 100 sheet stacker.  
* The Network Interface has a protective “plug” which must be removed before  
connection can be made.  
When the rear paper stacker is folded down, paper exits through the  
rear of the printer and is stacked here face up. This is mainly used for  
heavy print media. When used in conjunction with the multi purpose  
feed tray, the paper path through the printer is essentially straight.  
This avoids bending the paper around curves in the paper path and  
enables feeding of up to 203g/m² media.  
INTRODUCTION > 8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
CHANGING THE DISPLAY LANGUAGE  
The language used by your printer for display messages and for report  
printing can be changed quickly and easily as follows:  
ON LINE  
READY  
ENTER  
BACK  
ATTENTION  
MENU  
CANCEL  
1.  
Press the + key repeatedly to access the System Configuration  
Menu.  
2.  
3.  
Press the ENTER key to enter the System Configuration Menu.  
Press the key to move directly to the last item in this menu:  
LANGUAGE.  
4.  
5.  
Press ENTER to change this setting.  
Use the +/keys to move in either direction through the list of  
available languages until the language you want is displayed.  
6.  
7.  
Press the ENTER key to select this language.  
Press the ON LINE key to exit the menu system and return the  
printer to standby.  
The LCD display language can be changed to any of these languages:  
English  
German  
French  
Norwegian  
Danish  
Dutch  
Italian  
Turkish  
Portuguese  
Polish  
Spanish  
Swedish  
Russian  
Greek  
INTRODUCTION > 9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
PAPER RECOMMENDATIONS  
Your printer will handle a variety of print media, including a range of  
paper weights and sizes, transparencies and envelopes. This section  
provides general advice on choice of media, and explains how to use  
each type.  
The best performance will be obtained when using standard 75~90g/m²  
paper designed for use in copiers and laser printers. Suitable types are:  
>
>
Arjo Wiggins Conqueror Colour Solutions 90g/m²;  
Colour Copy by Neusiedler.  
Use of heavily embossed or very rough textured paper is not  
recommended.  
Pre-printed stationery can be used, but the ink must not offset when  
exposed to the high fuser temperatures used in the printing process.  
Envelopes should be free from twist, curl or other deformations. They  
should also be of the rectangular flap type, with glue that remains  
intact when subjected to hot roll pressure fusing used in this type of  
printer. Window envelopes are not suitable.  
Transparencies should be of the type designed for use in copiers and  
laser printers. We strongly recommend Oki transparencies (Order  
No. 01074101). In particular, avoid office transparencies designed  
for use by hand with marker pens. These will melt in the fuser and  
cause damage.  
Labels should also be of the type recommended for use in copiers and  
laser printers, in which the base carrier page is entirely covered by  
labels. Other types of label stock may damage the printer due to the  
labels peeling off during the printing process. Suitable types are:  
>
Avery White Laser Label types 7162, 7664, 7666 (A4),  
or 5161 (Letter);  
>
Kokuyo A693X series (A4) or A650 (B5).  
PAPER RECOMMENDATIONS > 10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
CASSETTE TRAYS  
Size  
Dimensions  
Weight (g/m²)  
A6 (Tray 1 only)  
A5  
105 x 148mm  
148 x 210mm  
182 x 257mm  
184.2 x 266.7mm  
210 x 297mm  
215.9 x 279.4mm  
216 x 330mm  
216 x 343mm  
216 x 356mm  
Light  
64-74g/m²  
B5  
Executive  
A4  
Medium  
Heavy  
75-90g/m²  
91-120g/m²  
Letter  
Ultra heavy 121-176g/m²  
Legal 13in.  
Legal 13.5in.  
Legal 14in.  
(Tray 2 only)  
If you have identical paper stock loaded in another tray (2nd tray if you  
have one, or multi purpose tray) you can have the printer automatically  
switch to the other tray when the current tray runs out of paper. When  
printing from Windows applications, this function is enabled in the  
driver settings. (See Printer Settings in Windowslater in this guide.)  
When printing from other systems, this function is enabled in the Print  
Menu. (See Menu Functionslater in this guide.)  
MULTI PURPOSE TRAY  
The multi purpose tray can handle the same sizes as the cassette  
trays but in weights up to 203g/m². For very heavy paper stock use the  
face up (rear) paper stacker. This ensures that the paper path through  
the printer is almost straight.  
The multi purpose tray can feed paper widths as small as 100mm and  
lengths up to 1200mm (banner printing).  
For paper lengths exceeding 356mm (Legal 14in.) use paper stock  
between 90g/m² and 128g/m² and the face up (rear) paper stacker.  
Use the multi purpose tray for printing on envelopes and  
transparencies. Up to 50 sheets of transparencies or 10 envelopes  
can be loaded at one time, subject to a maximum stacking depth of  
10mm.  
Paper or transparencies should be loaded print side up and top edge  
into the printer. Do not use the duplex (two-sided printing) function.  
PAPER RECOMMENDATIONS > 11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
FACE DOWN STACKER  
The face down stacker on the top of the printer can hold up to 250  
sheets of 80g/m² standard paper, and can handle paper stocks up to  
176g/m². Pages printed in reading order (page 1 first) will be sorted  
in reading order (last page on top, facing down).  
FACE UP STACKER  
The face up stacker at the rear of the printer should be opened and the  
tray extension pulled out when required for use. In this condition  
paper will exit via this path, regardless of driver settings.  
The face up stacker can hold up to 100 sheets of 80g/m² standard  
paper, and can handle stocks up to 203g/m².  
Always use this stacker and the multi purpose feeder for paper stocks  
heavier than 176g/m².  
DUPLEX UNIT  
This option provides automatic two-sided printing on the same range  
of paper sizes as tray 2 (i.e. all cassette sizes except A6), using paper  
stocks from 75-105g/m².  
NOTE  
The duplex unit comes as standard with C5400dn.  
PAPER RECOMMENDATIONS > 12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
LOADING PAPER  
CASSETTE TRAYS  
1.  
Remove the paper tray from the printer.  
2.  
Fan the paper to be loaded at the edges (1) and in the middle (2)  
to ensure that all sheets are properly separated, then tap the  
edges of the stack on a flat surface to make it flush again (3).  
1
2
3
LOADING PAPER > 13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
3.  
Load letter headed paper face down and top edge towards the  
front of the printer, as shown.  
1
2
4.  
Adjust the rear stopper (1) and paper guides (2) to the size of  
paper being used.  
To prevent paper jams:  
>
Do not leave space between the paper and the guides  
and rear stopper.  
>
Do not overfill the paper tray. Capacity depends on the  
type of paper stock.  
>
>
Do not load damaged paper.  
Do not load paper of different sizes or types at the same  
time.  
>
Do not pull the paper tray out during printing (except as  
described below for the 2nd tray).  
>
Close the paper tray gently.  
5.  
If you have two trays and you are printing from the 1st (upper)  
tray, you can pull out the 2nd (lower) tray during printing to  
reload it. However, if printing from the 2nd (lower) tray, do not  
pull out the 1st (upper) tray. This will cause a paper jam.  
LOADING PAPER > 14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
6.  
7.  
8.  
For face down printing, make sure the face up (rear) stacker (3)  
is closed (the paper exits from the top of the printer). Stacking  
capacity is approximately 250 sheets, depending on paper  
weight.  
For face up printing, make sure the face up (rear) stacker (3) is  
open and the paper support (4) is extended. Paper is stacked  
in reverse order and tray capacity is approximately 100 sheets,  
depending on paper weight.  
Always use the face up (rear) stacker for heavy paper (card  
stock etc.).  
3
4
CAUTION!  
Do not open or close the rear paper exit while printing as it may result  
in a paper jam.  
LOADING PAPER > 15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
MULTI PURPOSE TRAY  
1.  
Open the multi purpose tray and press gently down on the  
paper platform (1) to ensure it is latched down.  
1
3
2
2.  
Load the paper and adjust the paper guides (2) to the size of  
paper being used.  
>
For single-sided printing on headed paper load the  
paper into the multi purpose tray with pre-printed side  
up and top edge into the printer.  
>
For two-sided (duplex) printing on headed paper load  
the paper with pre-printed side down and top edge  
away from the printer. (Optional duplex unit must be  
installed for this function.)  
>
>
Envelopes should be loaded face up with top edge to  
the left and short edge into the printer. Do not select  
duplex printing on envelopes.  
Do not exceed the paper capacity of about 50 sheets or  
10 envelopes. Maximum stacking depth is 10mm.  
3.  
Press the tray latch button (3) inwards to release the paper  
platform, so that the paper is lifted and gripped in place.  
Set the correct paper size for the multi purpose tray in the Media  
Menu (see Menu Functions).  
LOADING PAPER > 16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
PRINTER SETTINGS IN WINDOWS  
Your printers operator panel menus provide access to many options.  
The Windows printer driver also contains settings for many of these  
items. Where items in the printer driver are the same as those in the  
operator panel menus, and you print documents from Windows, the  
settings in the Windows printer driver will override those items in the  
operator panel menus.  
The illustrations in this chapter show Windows XP. Other Windows  
versions may appear slightly different, but the principles are the  
same.  
PRINTING PREFERENCES IN WINDOWS  
APPLICATIONS  
When you choose to print your document from a Windows application  
program a Print dialogue box appears. This dialogue usually specifies  
the name of the printer on which you will print your document. Next to  
the printer name is a Properties button.  
When you click Properties a new window opens which contains a  
short list of the printer settings available in the driver, which you can  
choose for this document. The settings available from within your  
application are only those which you may want to change for specific  
applications or documents. Settings you change here will usually only  
last for as long as the particular application program is running.  
PRINTER SETTINGS IN WINDOWS > 17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
SETUP TAB  
When you click the Properties button  
from your applications Print  
dialogue, the driver window opens to  
allow you to specify your printing  
preferences for the current  
document.  
1
2
3
4
5
6
1.  
Paper size should be the  
same as the page size of your  
document (unless you wish to  
scale the printout to fit  
7
another size), and should also  
be the same as the size of paper you will feed into the printer.  
2.  
You can choose the source of the paper to feed, which may be  
Tray 1 (the standard paper tray), Tray 2 (if you have the  
optional 2nd paper tray installed) or the multi purpose feeder.  
You can also click on the appropriate part of the screen  
graphic to select your preferred tray.  
3.  
4.  
The setting for paper weight should match the type of paper on  
which you intend to print.  
A variety of document finishing options can be selected, such  
as normal one page per sheet, or N-up (where N can be any  
number up to 16) for printing scaled down pages at more than  
one page per sheet. Booklet printing prints two pages per  
sheet on each side of the paper so that when folded they make  
up a booklet. Booklet printing requires the duplex unit to be  
installed in your printer.  
Poster printing will print large pages as tiles spread over  
multiple sheets.  
5.  
6.  
7.  
For two-sided printing, you can choose to flip the page by the  
long edge or the short edge. Of course, this requires that a  
duplex unit be installed in your printer.  
If you have changed some printing preferences before and  
saved them as a set, you can recall them to avoid having to set  
them individually each time you need them.  
A single on-screen button restores the default settings.  
PRINTER SETTINGS IN WINDOWS > 18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
               
JOB OPTIONS TAB  
3
4
5
1
2
6
1.  
The output resolution of the printed page can be set as  
follows.  
>
The highest quality setting prints at 1200 x 600dpi.  
This option requires the most printer memory and takes  
the longest to print.  
>
>
The normal setting prints at 600 x 600dpi and is  
adequate for all but the most discerning applications.  
The draft setting prints at 300 x 300dpi and is suitable  
for draft documents, where print quality is less critical.  
2.  
3.  
You can print watermark text behind the main page image. This  
is useful for marking documents as draft, confidential, etc.  
You can select up to 999 copies to print consecutively,  
although you will need to top up the paper tray during such a  
long print run.  
4.  
5.  
6.  
Page orientation can be set to either portrait (tall) or  
landscape (wide).  
You printed pages can be scaled to fit larger or smaller  
stationery.  
A single on-screen button restores the default settings.  
PRINTER SETTINGS IN WINDOWS > 19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
COLOUR TAB  
1
2
4
5
3
1.  
2.  
Control over the colour output of your printer may be  
performed automatically, or for advanced control, by manual  
adjustment. The automatic setting will be appropriate in most  
cases. The other options in this window only become visible  
when you select a choice other than Auto. For greyscale  
printing, the printer runs at 24ppm and all pages are printed in  
black and white.  
You can choose from a range of colour matching options,  
depending on the image source for your document. For  
example, a photograph taken on a digital camera might  
require different colour matching to a business graphic  
created in a spreadsheet application. Again, for most general  
purpose use, automatic is the best choice.  
3.  
4.  
Printed output may be made lighter or darker, or the colours  
made more saturated and vibrant as required.  
Black areas may be printed using 100% cyan, magenta and  
yellow (composite black), giving a more glossy appearance, or  
using only black toner (true black), giving a more matte  
appearance. Choosing the automatic setting allows the driver  
to make the most appropriate choice depending on image  
content.  
5.  
A single on-screen button restores the default settings.  
PRINTER SETTINGS IN WINDOWS > 20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
SETTING FROM WINDOWS CONTROL PANEL  
When you open the driver properties window directly from Windows,  
rather than from within an application program, a somewhat more  
extensive range of settings is provided. Changes made here will  
generally affect all documents you print from Windows applications,  
and will be remembered from one Windows session to the next.  
GENERAL TAB  
1
2
3
1.  
2.  
This area lists some of the main features of your printer,  
including optional items, such as duplex (two-sided) printing.  
This button opens the same windows as described earlier for  
items which can be set from within application programs.  
Changes you make here, however, will become the new  
default settings for all Windows applications.  
3.  
This button prints a test page to ensure that your printer is  
working.  
PRINTER SETTINGS IN WINDOWS > 21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
ADVANCED TAB  
1
2
3
4
5
6
7
8
9
10  
12  
11  
1.  
2.  
3.  
You can specify which times of day your printer will be  
available.  
Indicates current priority, from 1 (lowest) to 99 (highest).  
Highest priority documents will print first.  
Specifies that documents should be spooled (stored in a  
special print file) before being printed. The document is then  
printed in the background, allowing your application program  
to become available more quickly.  
4.  
This specifies that printing should not start until the last page  
has been spooled. If your application program needs a lot of  
time for further computation in the middle of printing, causing  
the print job to pause for more than a short period, the printer  
could prematurely assume that the document has finished.  
Selecting this option would prevent that situation, but printing  
will be completed a little later, as the start is delayed.  
5.  
6.  
This is the opposite choice to the one above. Printing starts as  
soon as possible after the document begins spooling.  
This specifies that the document should not be spooled, but  
printed directly. Your application will not normally be ready for  
further use until the print job is complete. This requires less  
disk space on your computer, since there is no spool file.  
7.  
Directs the spooler to check the document setup and match it  
to the printer setup before sending the document to print. If a  
mismatch is detected, the document is held in the print queue  
and does not print until the printer setup is changed and the  
PRINTER SETTINGS IN WINDOWS > 22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
document restarted from the print queue. Mismatched  
documents in the queue will not prevent correctly matched  
documents from printing.  
8.  
Specifies that the spooler should favour documents which  
have completed spooling when deciding which document to  
print next, even if completed documents are lower priority  
than documents which are still spooling. If no documents have  
completed spooling, the spooler will favour larger spooling  
documents over shorter ones. Use this option if you want to  
maximise printer efficiency. When this option is disabled the  
spooler chooses documents based only on their priority  
settings.  
9.  
Specifies that the spooler should not delete documents after  
they are completed. This allows documents to be re submitted  
to the printer from the spooler instead of printing again from  
the application program. If you use this option frequently it  
will require large amounts of disk space on your computer.  
10. Specifies whether advanced features, such as booklet  
printing, page order and pages per sheet, are available,  
depending on your printer. For normal printing keep this  
option enabled. If compatibility problems occur you can  
disable the feature. However, these advanced options may  
then not be available, even though the hardware might  
support them.  
11. This button provides access to the same setup windows as  
when printing from applications. Changes made via the  
Windows Control Panel become the Windows default settings.  
12. You can design and specify a separator page that prints  
between documents. This is particularly useful on a shared  
printer to help each user find their own documents in the  
output stack.  
PRINTER SETTINGS IN WINDOWS > 23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
DEVICE OPTIONS TAB  
In this window you can select which  
optional upgrades are installed on your  
printer. This is covered in more detail in  
the section in this guide about installing  
upgrades.  
PRINTER SETTINGS IN WINDOWS > 24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
COLOUR PRINTING  
The printer drivers supplied with your printer provide several controls  
for changing the colour output. For general use the automatic settings  
will suffice, providing reasonable default settings that will produce  
good results for most documents.  
Many applications have their own colour settings, and these may  
override the settings in the printer driver. Please refer to the  
documentation for your software application for details on how that  
particular programs colour management functions.  
FACTORS THAT AFFECT THE APPEARANCE OF PRINTS  
If you wish to manually adjust the colour settings in your printer  
driver, please be aware that colour reproduction is a complex topic,  
and there are many factors to take into consideration. Some of the  
most important factors are listed below.  
Differences between the range of colours  
a monitor or printer can reproduce  
>
Neither a printer nor a monitor is capable of reproducing the  
full range of colours visible to the human eye. Each device is  
restricted to a certain range of colours. In addition to this, a  
printer cannot reproduce all of the colours displayed on a  
monitor, and vice versa.  
>
>
Both devices use very different technologies to represent  
colour. A monitor uses Red, Green and Blue (RGB) phosphors  
(or LCDs), a printer uses Cyan, Magenta, Yellow and Black  
(CMYK) toner or ink.  
A monitor can display very vivid colours such as intense reds  
and blues and these cannot be easily produced on any printer  
using toner or ink. Similarly, there are certain colours, (some  
yellows for example), that can be printed, but cannot be  
displayed accurately on a monitor. This disparity between  
monitors and printers is often the main reason that printed  
colours do not match the colours displayed on screen.  
COLOUR PRINTING > 25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Viewing conditions  
A print can look very different under different lighting conditions. For  
example, the colours in a print may look different when viewed  
standing next to a sunlit window, compared to how they look under  
standard office fluorescent lighting.  
Printer driver colour settings  
The driver settings for manual colour can change the appearance of a  
print. There are several options available to help match the printed  
colours with those displayed on screen.  
Monitor settings  
The brightness and contrast controls on your monitor can change how  
your document looks on-screen. Additionally, your monitors colour  
temperature influences how warmor coolthe colours look.  
There are several settings found on a typical monitor:  
>
5000k  
Warmest; yellowish lighting, typically used in  
graphic art environments.  
>
>
6500k  
9300k  
Cooler; approximates daylight conditions.  
Cool; the default setting for many monitors and  
television sets.  
(k = degrees Kelvin, a measurement of temperature.)  
How your software application displays colour  
Some graphics applications such as Corel Draw or Adobe Photoshop  
may display colour differently from Officeapplications such as  
Microsoft Word. Please see your applications on-line help or user  
manual for more information.  
Paper type  
The type of paper used can also significantly affect the printed colour.  
For example, a printout on recycled paper can look duller than one on  
specially formulated glossy paper.  
COLOUR PRINTING > 26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TIPS FOR PRINTING IN COLOUR  
The following guidelines may help you to achieve good colour output  
from your printer.  
PRINTING PHOTOGRAPHIC IMAGES  
Use the Monitor (6500k) Perceptual setting.  
If the colours look too dull, try the Monitor (6500k) Vivid or Digital  
Camera settings.  
PRINTING FROM OFFICE APPLICATIONS  
Use the Monitor (9300k) setting. This may help if you are having  
problems with specific colours from applications such as Microsoft  
Excel or Microsoft PowerPoint.  
PRINTING SPECIFIC COLOURS (E.G. A COMPANY LOGO)  
There are 2 utilities on your printer driver CD-ROM that can help match  
specific colours:  
Colour Correct Utility  
Colour Swatch Utility  
ADJUSTING THE BRIGHTNESS OR INTENSITY OF A PRINT  
If the print is too light/dark, you can use the Brightness control to  
adjust it.  
If the colours are too intense/not intense enough, use the Saturation  
control.  
COLOUR PRINTING > 27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
ACCESSING THE COLOUR MATCHING OPTIONS  
The colour matching options in the printer driver can be used to help  
match your printed colours to the ones displayed on your monitor or  
from some other source, such as a digital camera.  
To open colour matching options from  
the Windows Control Panel:  
1.  
Open the Printers window  
(called Printers and Faxesin  
Windows XP).  
2.  
3.  
Right-click the printer name  
and choose Properties.  
1
Click the Printing Preferences  
button (1).  
To open colour matching options from within a Windows application:  
1.  
2.  
Choose FilePrintfrom the applications menu bar.  
Click the Properties button next to the printer name.  
COLOUR PRINTING > 28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
SETTING THE COLOUR MATCHING OPTIONS  
1.  
On the Colour tab select Advanced Colour for colour matching.  
2.  
Choose the Manual colour setting and select from the  
following options:  
1
2
a
b
c
d
e
(a)  
(b)  
Monitor (6500k) Perceptual  
Optimised for printing photographs. Colours are printed  
with emphasis on saturation.  
Monitor (6500k) Vivid  
Optimised for printing photographs, but with even more  
saturated colours than the Monitor (6500k) Perceptual  
setting.  
COLOUR PRINTING > 29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
(c)  
(d)  
Monitor (9300k)  
Optimised for printing graphics from applications such  
as Microsoft Office. Colours are printed with emphasis  
on Lightness.  
Digital Camera  
Optimised for printing photographs taken with a digital  
camera.  
Your results will vary depending on the subject and the  
conditions under which the photograph was taken.  
(e)  
sRGB  
The printer will try to reproduce the sRGB colour space.  
This may be useful if colour matching from an sRGB  
input device such as a scanner or digital camera.  
USING THE COLOUR SWATCH FEATURE  
To use the Colour Swatch feature, you must install the Colour Swatch  
Utility. This is supplied on the CD-ROM that was supplied with your  
printer.  
The Colour Swatch function prints charts which contain a range of  
sample colours. Note that this is not the full range of colours that the  
printer can produce. Listed on each sample colour are the  
corresponding RGB (Red, Green, Blue) values. This can be used to pick  
specific colours in applications that allow you to choose your own  
RGB values. Simply click the Colour Swatch button (1) and choose  
from the options available.  
1
COLOUR PRINTING > 30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
An example of using the colour swatch function:  
You wish to print a logo in a particular shade of red. The steps you  
would follow are:  
1.  
2.  
3.  
Print a colour swatch, then select the shade of red that best  
suits your needs.  
Take a note of the RGB value for the particular shade that you  
liked.  
Using your programs colour picker, enter these same RGB  
values, and change the logo to that colour.  
The RGB colour displayed on your monitor may not necessarily match  
what was printed on the colour swatch. If this is the case, it is  
probably due to the difference between how your monitor and printer  
reproduce colour. Here, it is unimportant since your primary objective  
is to print the required colour.  
USING THE COLOUR CORRECT UTILITY  
The Oki Colour Correct Utility is provided on your printer driver CD-  
ROM. You must install it separately since it is not installed along with  
the printer driver.  
The Colour Correct utility has the following features:  
>
>
Microsoft Office palette colours can be individually adjusted.  
This is useful if you want to change how a specific colour is  
printed.  
Colours can be adjusted by changing Hue, Saturation and  
Gamma. This is useful if you wish to change the overall colour  
output.  
Once these colour adjustments have been made, the new settings can  
be selected from the printer driver Colour tab.  
To select adjustments made with the Colour Correct Utility:  
1.  
2.  
3.  
From your application program, click File and point to Print.  
Click Properties. This displays the printer driver options.  
Click the Colour tab.  
COLOUR PRINTING > 31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
4.  
5.  
Click Advanced Colour.  
Click User Defined.  
Select the colour adjustment you made with the Colour Correct Utility.  
COLOUR PRINTING > 32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MENU FUNCTIONS  
This section lists the menus accessed via the controls on the printers  
operator panel and displayed in the LCD window.  
It should be noted that many of these settings can be, and often are,  
overridden by settings in the Windows printer drivers. However,  
several of the driver settings can be left at Printer Setting, which will  
then default to the settings entered in these printer menus.  
Factory default settings are shown in bold type in the following tables.  
In the normal operating condition, known as standby,the printers  
LCD window will show ONLINE.In this condition, to enter the menu  
system, press the +/keys on the operator panel to move up and  
down through the list of menus until the menu you wish to view is  
displayed. The proceed as follows:  
1.  
2.  
Press ENTER to enter the menu.  
Use the +/keys to move up and down through the items in  
the menu. When the item you want to change is displayed,  
press ENTER to edit that item. An asterisk (*) appears next to  
the setting currently in effect.  
3.  
Use the +/keys to move up and down through the available  
settings for this item, and press ENTER when the setting you  
want is displayed. An asterisk (*) will appear next to the  
setting, indicating that this setting is now in effect.  
4.  
5.  
Press BACK to move back to the list of menu items.  
Do one of the following:  
>
Press BACK again to move up to the list of menus;  
or…  
>
Press ON LINE to exit from the menu system and return  
to standby.  
MENU FUNCTIONS > 33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
INFORMATION MENU  
This menu provides a quick method of listing various items stored  
within the printer.  
INFORMATION MENU  
Item  
Action  
Explanation  
PRINT MENU MAP EXECUTE  
Prints complete menu listing with current  
settings shown.  
DEMO1  
EXECUTE  
Prints demo page.  
PRINT MENU  
This menu provides adjustment of various print job related functions.  
PRINT MENU  
Item  
Settings  
Explanation  
COPIES  
1-999  
Enter the number of copies of a document to be  
printed from 1 to 999.  
PAPER FEED  
TRAY1  
TRAY2  
MP TRAY  
Selects the default tray for paper feed, Tray 1  
(upper), Tray 2 (lower, if installed) or MP Tray  
(multi purpose tray).  
AUTO TRAY SWITCH ON/OFF  
Turns Auto Tray Switch function ON or OFF.  
TRAY SEQUENCE  
DOWN  
UP  
Select Tray Sequences of Auto Tray Select and  
Auto Tray Switch  
PAPER FEED  
TRAY  
MP TRAY USAGE  
DO NOT USE  
WHEN  
MISMATCH  
If a document to be printed demands a paper  
size not installed in the selected tray, the  
printer can automatically feed from the multi  
purpose tray instead. If this function is not  
enabled, the printer will stop and request the  
correct size of paper to be loaded.  
MEDIA CHECK  
ENABLE  
DISABLE  
Determines whether the printer check the size  
of paper loaded matches that required for the  
document sent to print.  
MENU FUNCTIONS > 34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
PRINT MENU  
Item  
Settings  
Explanation  
MONO-PRINT SPEED AUTO SPEED  
If the first page of a print job is only black and  
white, the printer runs at 20ppm (pages per  
minute). When a colour page is detected the  
printer slows down to 16ppm for the rest of  
that job.  
MONO 24PPM This setting operates in the same way as AUTO  
SPEED, except that the printer runs at 24ppm  
until a colour page is detected. To achieve this  
speed the printer requires an additional 10 –  
20 seconds to warm up and 30 – 60 seconds to  
cool down when switching to 16ppm for colour  
pages. This setting is therefore most  
appropriate when the majority of print jobs are  
entirely black and white.  
COLOUR SPEED The printer runs at 16ppm for all print jobs.  
This setting is most appropriate when the  
majority of print jobs are in colour.  
MIXED SPEED  
The printer automatically switches between  
16ppm for each colour page and 20ppm for  
each black and white page. When black and  
white pages are printed, the 3 colour drums  
are automatically lifted to maximize their  
working life. This operation imposes a 10 – 20  
second delay each time the printer switches  
between colour and black and white printing.  
However, the 30 – 60 second cool down delay  
described for MONO 24ppm is avoided by  
limiting black and white speed to 20ppm. This  
setting may be preferred for mostly black and  
white printing with some colour pages, or for  
environments where print jobs consist of all  
colour pages or all black and white pages.  
MENU FUNCTIONS > 35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MEDIA MENU  
This menu provides adjustment to suit a wide range of print media.  
MEDIA MENU  
Item  
Settings  
Explanation  
TRAY1 PAPERSIZE A4 / A5 / A6 / B5  
Selects the size of paper loaded in Tray 1  
(upper tray if both trays installed). For  
CUSTOM setting see X-DIMENSION and  
Y-DIMENSION later in this table.  
LEGAL14  
LEGAL13.5  
LEGAL13  
LETTER  
EXECUTIVE  
CUSTOM  
TRAY1 MEDIATYPE PLAIN  
LETTERHEAD  
BOND  
Selects the type of media loaded in this  
tray. This will help the printer to adjust  
its internal operating parameters, such  
as engine speed and fusing  
RECYCLED  
CARDSTOCK  
ROUGH  
temperature, to better accommodate the  
media to be fed. For example, letterhead  
may benefit from a slightly lower fusing  
temperature to ensure that its ink does  
not offset.  
TRAY1  
LIGHT (64-74g/m²)  
Adjusts the printer for the weight of  
MEDIAWEIGHT  
MEDIUM (75-90g/m²) paper stock loaded in thus tray.  
HEAVY (91-120g/m²)  
TRAY2 PAPERSIZE A4 / A5 / B5 / LEGAL14 Selects the size of paper loaded in Tray 2  
LEGAL13.5  
LEGAL13  
LETTER  
(lower) if installed. For CUSTOM setting  
see X-DIMENSION and Y-DIMENSION  
later in this table.  
EXECUTIVE  
CUSTOM  
TRAY2 MEDIATYPE PLAIN  
Selects the type of media loaded in this  
tray.  
LETTERHEAD  
BOND  
RECYCLED  
CARDSTOCK  
ROUGH  
TRAY2  
LIGHT (64-74g/m²)  
Adjusts the printer for the weight of  
MEDIAWEIGHT  
MEDIUM (75-90g/m²) paper stock loaded in this tray.  
HEAVY (91-120g/m²)  
ULTRA HEAVY  
(121-176g/m²)  
MENU FUNCTIONS > 36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
MEDIA MENU  
Item  
Settings  
Explanation  
MPT PAPERSIZE  
A4 / A5 / A6 / B5  
LEGAL14  
LEGAL13.5  
Selects the size of paper to be fed from  
the multi purpose tray. For CUSTOM  
setting see X-DIMENSION and Y-  
DIMENSION later in this table.  
LEGAL13  
LETTER  
EXECUTIVE  
CUSTOM  
COM-9 ENVELOPE  
COM-10 ENVELOPE  
MONARCH ENV  
DL ENVELOPE  
C5 ENVELOPE  
MPT PAPERTYPE  
PLAIN  
Selects the type of media to be fed from  
the multi purpose tray so that the printer  
can adjust its internal parameters to  
better accommodate the selected type  
of media.  
LETTERHEAD  
TRANSPARENCY  
LABELS  
BOND  
RECYCLED  
CARD STOCK  
ROUGH  
MPT MEDIAWEIGHT MEDIUM (75-90g/m²) Selects the media weight to be fed from  
HEAVY (91-120g/m²)  
ULTRA HEAVY (121-  
203g/m²)  
the multi purpose tray.  
UNIT OF MEASURE MILLIMETRE  
Selects the unit of measure for the next  
two items.  
INCH  
X-DIMENSION  
Y-DIMENSION  
100-210-216  
MILLIMETRE  
Selects the width of paper defined by  
the CUSTOMsettings referred to in the  
foregoing PAPER SIZE settings.  
148-297-1200  
MILLIMETRE  
Selects the length of paper defined by  
the CUSTOMsettings referred to in the  
foregoing PAPER SIZE settings. Note that  
media of up to 1200mm in length can be  
fed from the multi purpose tray for  
banner printing.  
MENU FUNCTIONS > 37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
COLOUR MENU  
The printer automatically adjusts colour balance and density at  
appropriate intervals, optimising the printed output for bright white  
paper viewed in natural daylight conditions. The items on this menu  
provide a means of changing the default settings for special or  
particularly difficult print jobs. Settings revert to their default values  
when the next print job is complete.  
COLOUR MENU  
Item  
Settings  
Explanation  
DENSITY CONTROL AUTO  
MANUAL  
If set to AUTO, image density will be  
automatically adjusted at power on, when a  
new image drum or toner cartridge is  
installed, and at intervals of 100, 300 and  
500 drum counts. If a 500 drum count  
interval occurs during a print job it will occur  
at the end of that job, and will take up to 55  
seconds. If set to manual, this adjustment  
will only be performed when initiated by the  
next menu item.  
ADJUST DENSITY  
EXECUTE  
Selecting this will perform the auto density  
set up immediately.  
AJST REGISTRATION EXECUTE  
Performs automatic colour registration  
adjustment. Normally this is done on power  
on and when the top cover is opened and  
then closed. This process accurately aligns  
the cyan, magenta and yellow images to the  
black image.  
C REG FINE ADJUST -3~0~+3  
M REG FINE ADJUST -3~0~+3  
Y REG FINE ADJUST -3~0~+3  
Performs fine adjustment of image timing in  
relation to the black image component.  
MENU FUNCTIONS > 38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
SYSTEM CONFIGURATION MENU  
This menu adjusts general printer settings to suit the way you prefer  
to work.  
SYSTEM CONFIGURATION MENU  
Items  
Settings  
Explanation  
POW SAVE TIME  
5
Adjusts the idling time before the printer  
automatically switches into power saving  
mode. In this mode power consumption is  
reduced to a low level required to just keep  
the printer operating and ready to receive  
data. When a job is sent the printer will  
require a warm-up time of up to 1 minute  
before printing can begin.  
15  
30  
60  
240  
CLEARABLE  
WARNING  
ON  
JOB  
When ON, non-critical warnings, such as  
requests for a different paper size, can be  
cleared by pressing the ON LINE button.  
When set to JOB, they are cleared when the  
print job resumes.  
MANUAL TIMEOUT OFF  
Specifies how many seconds the printer will  
wait for paper to be fed before cancelling  
the job.  
30  
60  
WAIT TIMOUT  
5~40~300  
Specifies how many seconds the printer will  
wait when received data pauses before  
forcing a page eject. In PostScript Emulation  
mode the job will be cancelled if timeout  
occurs.  
LOW TONER  
CONTINUE  
STOP  
Specifies whether the printer should  
continue printing even after a low toner  
condition is detected.  
JAM RECOVERY  
ON  
OFF  
Specifies whether the printer should  
perform jam recovery after a paper jam has  
occurred. If ON, the printer will attempt to  
print again any pages lost due to a paper  
jam once the jam has been cleared.  
LANGUAGE  
English, German, Sets the language used for the display  
French, Italian,  
Spanish, Swedish,  
Norwegian,  
window and printed reports.  
Danish, Dutch,  
Turkish,  
Portuguese,  
Polish, Russian,  
Greek,  
MENU FUNCTIONS > 39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
USB MENU  
This menu controls the operation of the printers USB data interface.  
USB MENU  
Item  
Settings  
Explanation  
VERSION  
2.0  
Selects USB version for compatibility.  
SOFT RESET  
ENABLE / DISABLE Enables or disables the SOFT RESET  
command.  
NETWORK MENU  
This menu controls the operation of the printers 10Base-T/100Base-T  
network interface.  
NETWORK MENU  
Item  
Settings  
Explanation  
TCP/IP  
ENABLE / DISABLE Enables or disables this network protocol.  
NETBEUI  
ENABLE / DISABLE Enables or disables this network protocol.  
IP ADDRESS SET  
AUTO / MANUAL  
Specifies whether IP address allocation is  
automatic (DHCP) or manually assigned.  
IP ADDRESS  
xxx.xxx.xxx.xxx  
Current assigned IP address. To change,  
press ENTER and use +/keys to increment  
1st octet, then press ENTER again to move  
on to next octet. When 4th octet has been  
set, press ENTER again to register new  
address.  
SUBNET MASK  
xxx.xxx.xxx.xxx  
Current assigned subnet mask. To change,  
proceed as above.  
GATEWAY ADDRESS xxx.xxx.xxx.xxx  
Current assigned gateway address. To  
change, proceed as above.  
INITIALIZE NIC?  
WEB/IPP  
EXECUTE  
Initialises the network hardware.  
ENABLE / DISABLE Enables or disables Web config. facility and  
Internet Printing Protocol.  
TELNET  
FTP  
ENABLE / DISABLE Enables or disables Telnet config. facility.  
ENABLE / DISABLE Enables or disables communication via FTP.  
ENABLE / DISABLE Enables or disables SNMP protocol.  
NORMAL / SMALL  
SNMP  
LAN  
MENU FUNCTIONS > 40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
MEMORY MENU  
This menu determines how printer memory is used.  
Memory Menu  
Item  
Settings  
Explanation  
RECEIVE BUF SIZE AUTO, 0.5MB,  
1MB, 2MB, 4MB,  
Sets the size of buffer memory for receiving  
incoming data. Normally this is allocated  
dynamically as required.  
8MB, 16MB  
FLASH INITIALIZE  
EXECUTE  
Clears all data from flash memory.  
SYSTEM ADJUSTMENT MENU  
This menu provides fine adjustment of image position on the printed  
page in steps of 0.25mm.  
Sys Adjust Menu  
Item  
Settings  
Explanation  
X ADJUST  
Y ADJUST  
-2.00 ~ 0 ~ +2.00 Horizontal position.  
-2.00 ~ 0 ~ +2.00 Vertical position.  
MENU FUNCTIONS > 41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
MAINTENANCE MENU  
This menu provides access to various printer maintenance functions.  
MAINTENANCE MENU  
Item  
Settings  
Explanation  
MENU RESET  
SAVE MENU  
EXECUTE  
EXECUTE  
Resets menus to default settings.  
Saves current menu settings as default  
values. At confirmation prompt, press  
ENTER to confirm save, or CANCEL to cancel.  
POWER SAVE  
ENABLE / DISABLE Enables or disables automatic power save  
mode. Delay before entering this mode is  
set in the system configuration menu.  
PAPER BLACK  
SETTING  
2~0~+2  
Used for small adjustment when you  
experience faded print or light specks /  
streaking in monochrome printing on white  
paper. Select a higher value to reduce  
fading, or a lower value to reduce specks or  
streaking in high density print areas.  
PAPER COLOUR  
SETTING  
2~0~+2  
As above, but for colour printing.  
TRANSPR BLACK  
SETTING  
2~0~+2  
As above but for mono printing on  
transparencies.  
TRANSPR COLOUR 2~0~+2  
SETTING  
As above but for colour printing on  
transparencies.  
MENU FUNCTIONS > 42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
USAGE MENU  
This menu is for information only, and provides an indication of total  
usage of the printer and the expected life left in its consumable items.  
This is particularly useful if you do not have a full set of replacement  
consumables to hand and you need to know how soon you will need  
them.  
USAGE MENU  
Item  
Explanation  
TOTAL PAGE COUNT  
TRAYn PAGE COUNT  
MPT PAGE COUNT  
The total number of prints output by the printer.  
The total number of pages fed from tray n.  
The total number of pages fed from the multi purpose tray.  
The total number of pages printed in colour.  
COLOUR PAGE COUNT  
MONO PAGE COUNT  
The total number of pages printed in monochrome.  
K DRUM LIFE REMAINING  
C DRUM LIFE REMAINING  
M DRUM LIFE REMAINING  
Y DRUM LIFE REMAINING  
Percentage of life remaining in these consumable items.  
K TONER  
C TONER  
M TONER  
Y TONER  
Current toner level for 5,000 page and 3,000 page  
cartridges.  
MENU FUNCTIONS > 43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
REPLACING CONSUMABLE ITEMS  
This section explains how to replace consumable items when due. As  
a guide, the life expectancy of these items is:  
>
Toner 3,000 (standard capacity) or 5,000 (high capacity) A4  
pages at 5% coverage, which means that 5% of the  
addressable print area is printed with this colour. Toner life is  
directly affected by coverage, e.g. at 10% coverage there is  
sufficient toner for 1,500 pages (standard capacity) or 2,500  
pages (high capacity), conversely at 2.5% there is sufficient  
toner for 6,000 pages (standard capacity) or 10,000 pages  
(high capacity) in the cartridge.  
The printer is shipped with sufficient toner for 3,000 A4 pages  
in the print cartridges of which 1,500 A4 pages of toner are  
used to charge the image drum.  
>
Image drum 17,000 pages (calculated on typical office  
usage where 20% of printing is 1 page only, 30% is 3 page  
documents and 50% is print runs of 15 pages or more).  
>
>
Transfer belt Approximately 50,000 A4 pages.  
Fuser Approximately 45,000 A4 pages.  
2
5K XXXXXX  
1
3K XXXXX  
1.  
2.  
Standard capacity toner cartridge.  
High capacity toner cartridge.  
REPLACING CONSUMABLE ITEMS > 44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
CONSUMABLE ORDER DETAILS  
Item  
Life  
Order No.  
Toner, high capacity, black  
Toner, high capacity, cyan  
Toner, high capacity, magenta  
Toner, high capacity, yellow  
Toner, rainbow pack (1 ea. CMYK)  
Toner, standard capacity, black  
Toner, standard capacity, cyan  
Toner, standard capacity, magenta  
Toner, standard capacity, yellow  
Image drum, black  
5,000 A4 @ 5%  
5,000 A4 @ 5%  
5,000 A4 @ 5%  
5,000 A4 @ 5%  
5,000 A4 @ 5%  
3,000 A4@ 5%  
3,000 A4@ 5%  
3,000 A4@ 5%  
3,000 A4@ 5%  
17,000 A4 pages*  
17,000 A4 pages*  
17,000 A4 pages*  
17,000 A4 pages*  
45,000 A4 pages  
50,000 A4 @ 3/job  
42127408  
42127407  
42127406  
42127405  
42403002  
42804508  
42804507  
42804506  
42804505  
42126608  
42126607  
42126606  
42126605  
42625503  
42158712  
Image drum, cyan  
Image drum, magenta  
Image drum, yellow  
Fuser  
Transport belt  
*
Average life (22,000 pages at continuous print, 15,000 pages at 3 pages/job  
and 7,500 pages at 1 page/job).  
Please always use genuine Oki consumables. Use of compatibles”  
and counterfeit items may impair performance and could cause  
product damage, which is not covered under the warranty.  
REPLACING CONSUMABLE ITEMS > 45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
TONER CARTRIDGE REPLACEMENT  
The toner used in this printer is a very fine dry powder. It is contained  
in four cartridges: one each for cyan, magenta, yellow and black.  
Have a sheet of paper handy so that you have somewhere to place the  
used cartridge while you install the new one.  
Dispose of the old cartridge responsibly, inside the pack that the new  
one came in. Follow any regulations, recommendations, etc., which  
may be in force concerning waste recycling.  
If you do spill any toner powder, lightly brush it off. If this is not  
enough, use a cool, damp cloth to remove any residue. Do not use hot  
water, and never use solvents of any kind. They will make stains  
permanent.  
WARNING!  
If you inhale any toner or get it in your eyes, drink a little water or  
bathe your eyes liberally in cold water. Seek medical attention  
immediately.  
Switch off the printer and allow the fuser to cool for about 10 minutes  
before opening the cover.  
REPLACING CONSUMABLE ITEMS > 46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
1.  
Press the cover release and open the printers top cover fully.  
WARNING!  
If the printer has been powered on, the fuser may be hot. This area is  
clearly labelled. Do not touch.  
2.  
Note the positions of the four cartridges.  
1
2
3
4
1. Cyan cartridge  
3. Yellow cartridge  
2. Magenta cartridge  
4. Black cartridge  
REPLACING CONSUMABLE ITEMS > 47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3.  
Carry out one of the following:  
(a)  
If you are replacing a toner cartridge that has been  
supplied with your printer (lever has 3 positions), pull  
the coloured toner release lever on the cartridge to be  
replaced towards the front of the printer, in the direction  
of the arrow, but stop at the central (upright)  
position (1).  
1
(b)  
If you are replacing any other toner cartridge (lever has  
2 positions), pull the coloured toner release lever (1) on  
the cartridge to be replaced fully towards the front of the  
printer.  
1
REPLACING CONSUMABLE ITEMS > 48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4.  
Lift the right-hand end of the cartridge and then draw the  
cartridge to the right to release the left-hand end as shown,  
and withdraw the toner cartridge out of the printer.  
1
2
5.  
Put the cartridge down gently onto a piece of paper to prevent  
toner from marking your furniture and to avoid damaging the  
green drum surface.  
CAUTION!  
The green image drum surface at the base of the cartridge is very  
delicate and light sensitive. Do not touch it and do not expose it to  
normal room light for more than 5 minutes. If the drum unit needs to  
be out of the printer for longer than this, please wrap the cartridge  
inside a black plastic bag to keep it away from light. Never expose the  
drum to direct sunlight or very bright room lighting.  
6.  
Remove the new cartridge from its box but leave its wrapping  
material in place for the moment.  
REPLACING CONSUMABLE ITEMS > 49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7.  
Gently shake the new cartridge from end to end several times  
to loosen and distribute the toner evenly inside the cartridge.  
8.  
Remove the wrapping material and peel off the adhesive tape  
from the underside of the cartridge.  
9.  
Holding the cartridge by its top centre with the coloured lever  
to the right, lower it into the printer over the image drum unit  
from which the old cartridge was removed.  
10. Insert the left end of the cartridge into the top of the image  
drum unit first, pushing it against the spring on the drum unit,  
REPLACING CONSUMABLE ITEMS > 50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
then lower the right end of the cartridge down onto the image  
drum unit.  
2
1
11. Pressing gently down on the cartridge to ensure that it is firmly  
seated, push the coloured lever (1) towards the rear of the  
printer. This will lock the cartridge into place and release toner  
into the image drum unit.  
1
12. Finally, close the top cover and press down firmly at both sides  
so that the cover latches closed.  
REPLACING CONSUMABLE ITEMS > 51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMAGE DRUM REPLACEMENT  
Switch off the printer and allow the fuser to cool for about 10 minutes  
before opening the cover.  
CAUTION!  
Static sensitive devices, handle with care.  
The printer contains four image drums: cyan, magenta, yellow and  
black.  
1.  
Press the cover release and open the printers top cover fully.  
WARNING!  
If the printer has been powered on, the fuser will be hot. This area is  
clearly labelled. Do not touch.  
REPLACING CONSUMABLE ITEMS > 52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
2.  
Note the positions of the four cartridges.  
1
2
3
4
1. Cyan cartridge  
3. Yellow cartridge  
2. Magenta cartridge  
4. Black cartridge  
3.  
Holding it by its top centre, lift the image drum, complete with  
its toner cartridge, up and out of the printer.  
REPLACING CONSUMABLE ITEMS > 53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4.  
Put the cartridge down gently onto a piece of paper to prevent  
toner from marking your furniture and to avoid damaging the  
green drum surface.  
CAUTION!  
The green image drum surface at the base of the cartridge is very  
delicate and light sensitive. Do not touch it and do not expose it to  
normal room light for more than 5 minutes. If the drum unit needs to  
be out of the printer for longer than this, please wrap the cartridge  
inside a black plastic bag to keep it away from light. Never expose the  
drum to direct sunlight or very bright room lighting.  
5.  
With the coloured toner release lever (1) to the right, pull the  
lever towards you. This will release the bond between the  
toner cartridge and the image drum cartridge.  
1
6.  
Lift the right-hand end of the cartridge and then draw the  
cartridge to the right to release the left-hand end as shown,  
and withdraw the toner cartridge out of the image drum  
cartridge. Place the cartridge on a piece of paper to avoid  
marking your furniture.  
2
1
REPLACING CONSUMABLE ITEMS > 54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7.  
8.  
Take the new image drum cartridge out of its packaging and  
place it on the piece of paper where the old cartridge was  
placed. Keep it the same way round as the old unit. Pack the  
old cartridge inside the packaging material for disposal.  
Place the toner cartridge onto the new image drum cartridge  
as shown. Push the left end in first, and then lower the right  
end in. (It is not necessary to fit a new toner cartridge at this  
time unless the remaining toner level is very low.)  
1
2
9.  
Push the coloured release lever (1) away from you to lock the  
toner cartridge onto the new image drum unit and release  
toner into it.  
1
REPLACING CONSUMABLE ITEMS > 55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10. Holding the complete assembly by its top centre, lower it into  
place in the printer, locating the pegs at each end into their  
slots in the sides of the printer cavity.  
11. Finally, close the top cover and press down firmly at both sides  
so that the cover latches closed.  
NOTE  
If you need to return or transport your printer for any reason, please  
make sure you remove the image drum unit beforehand and place in the  
bag provided. This is to avoid toner spillage.  
REPLACING CONSUMABLE ITEMS > 56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
REPLACING THE BELT UNIT  
The belt unit is located under the four image drums. This unit requires  
replacement approximately every 50,000 pages.  
Switch off the printer and allow the fuser to cool for about 10 minutes  
before opening the cover.  
1.  
Press the cover release and open the printers top cover fully.  
WARNING!  
If the printer has been powered on, the fuser will be hot. This area is  
clearly labelled. Do not touch.  
2.  
Note the positions of the four cartridges. It is essential that  
they go back in the same order  
1
2
3
4
1. Cyan cartridge  
3. Yellow cartridge  
2. Magenta cartridge  
4. Black cartridge  
REPLACING CONSUMABLE ITEMS > 57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
3.  
Lift each of the image drum units out of the printer and place  
them in a safe place away from direct sources of heat and  
light.  
CAUTION!  
The green image drum surface at the base of each cartridge is very  
delicate and light sensitive. Do not touch it and do not expose it to  
normal room light for more than 5 minutes. If the drum unit needs to  
be out of the printer for longer than this, please wrap the cartridge  
inside a black plastic bag to keep it away from light. Never expose the  
drum to direct sunlight or very bright room lighting.  
4.  
Locate the two fasteners (5) at each side of the belt and the  
lifting bar (6) at the front end.  
5
6
5.  
6.  
Turn the two fasteners 90° to the left. This will release the belt  
from the printer chassis.  
Pull the lifting bar (6) upwards so that belt tilts up towards the  
front, and withdraw the belt unit from the printer.  
REPLACING CONSUMABLE ITEMS > 58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7.  
Lower the new belt unit into place, with the lifting bar at the  
front and the drive gear towards the rear of the printer. Locate  
the drive gear into the gear inside the printer by the rear left  
corner of the unit, and lower the belt unit flat inside the  
printer.  
8.  
9.  
Turn the two fasteners (5) 90° to the right until they lock. This  
will secure the belt unit in place.  
Replace the four image drums, complete with their toner  
cartridges, into the printer in the same sequence as they came  
out: cyan (nearest the rear), magenta, yellow and black  
(nearest the front).  
10. Finally, close the top cover and press down firmly at both  
sides so that the cover latches closed.  
REPLACING CONSUMABLE ITEMS > 59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FUSER REPLACEMENT  
The fuser is located inside the printer just behind the four image drum  
units.  
WARNING!  
If the printer has recently been powered on, some fuser components  
will be very hot. Handle the fuser with extreme care, holding it only by  
its handle, which will only be mildly warm to the touch. A warning  
label clearly indicates the area. If in doubt, switch the printer off and  
wait at least 10 minutes for the fuser to cool before opening the printer  
cover.  
Switch off the printer and allow the fuser to cool for about 10 minutes  
before opening the cover.  
1.  
Press the cover release and open the printers top cover fully.  
REPLACING CONSUMABLE ITEMS > 60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
2.  
Identify the fuser handle (1) on the top of the fuser unit.  
1
C
2
M
Y
K
3.  
4.  
Pull the two fuser retaining levers (2) towards the front of the  
printer so that they are fully upright.  
Holding the fuser by its handle (1), lift the fuser straight up  
and out of the printer. If the fuser is still warm, place it on a flat  
surface which will not be damaged by heat.  
5.  
6.  
Remove the new fuser from its packaging and remove the  
transit material.  
Holding the new fuser by its handle, make sure that it is the  
correct way round. The retaining levers (2) should be fully  
upright, and the two locating lugs (3) should be towards you.  
3
2
2
REPLACING CONSUMABLE ITEMS > 61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7.  
8.  
Lower the fuser into the printer, locating the two lugs (3) into  
their slots in the metal partition which separates the fuser  
area from the image drums.  
Push the two retaining levers (2) towards the rear of the printer  
to lock the fuser in place.  
C
2
M
Y
K
9.  
Finally, close the top cover and press down firmly at both sides  
so that the cover latches closed.  
REPLACING CONSUMABLE ITEMS > 62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLING UPGRADES  
This section explains how to install optional equipment into your  
printer. This includes:  
>
>
duplex (two-sided printing) unit;  
additional RAM memory.  
DUPLEX UNIT  
The duplex unit adds the function of two-sided printing, using less  
paper and making large documents easier to handle. It also enables  
booklet printing, which uses even less paper and makes large  
documents even easier to handle.  
The duplex unit slides straight into the rear of the printer and requires  
no tools to install.  
Ensure printer is switched off at the AC outlet and remove cable from  
printer AC input socket.  
1.  
2.  
Unpack the new unit and remove any transit material from it.  
Ensure that the unit is the right way up, as shown, and push it  
into the slot behind the rear panel. The panel will swing  
inwards as you push the unit into it. Push the unit all the way  
in until it stops and latches home.  
3.  
Switch the printer on and wait for it to warm up (about  
1 minute).  
INSTALLING UPGRADES > 63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
4.  
5.  
Print a menu map as follows:  
(a)  
(b)  
(c)  
(d)  
Press the + button to access the Information Menu.  
Press ENTER once for the menu map.  
Press ENTER again to print the menu map.  
When the menu map is printed, press ON LINE to exit the  
menu system.  
Examine the first page of the menu map.  
Near the top of the page, between the two horizontal lines, you  
will see the current printer configuration. This list should  
indicate that the duplex unit is now installed.  
All that remains is to adjust the Windows printer driver to make  
full use of the new features.  
INSTALLING UPGRADES > 64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MEMORY UPGRADE  
The basic printer model comes equipped with 32MB of main memory.  
This can be upgraded with an additional memory board containing  
64MB or 256MB, giving a maximum total memory capacity of 288MB.  
Installation takes a few minutes, and requires a medium size cross-  
head (philips type) screwdriver.  
1.  
2.  
Switch the printer off and disconnect the AC power cable.  
Press the cover release and open the printers top cover fully.  
WARNING!  
If the printer has been powered on recently, the fuser will be hot. This  
area is clearly labelled. Do not touch.  
3.  
4.  
Lift the front cover latch and pull open the front cover.  
Remove the screw securing the right-hand side cover.  
5.  
Lift the edge of the side cover slightly at the two points shown,  
and pull the cover away from the printer at the top. Lift the  
cover slightly to detach it from the printer. Place it safely to  
one side.  
INSTALLING UPGRADES > 65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
6.  
7.  
Carefully remove the new memory board from its wrapping.  
Try to handle the board only by its short edges, avoiding  
contact with any metal parts as far as possible. In particular,  
avoid touching the edge connector.  
Notice that the memory board has a small cutout in the edge  
connector, which is closer to one end than the other.  
8.  
Identify the RAM expansion slot (1) in the printer.  
2
1
2
9.  
If the RAM expansion slot already contains a memory upgrade  
board, that board will have to be removed before you can  
install the new one. To remove it proceed as follows,  
otherwise skip to step 10.  
(a)  
(b)  
(c)  
(d)  
Identify the locking clips (2) at each end of the RAM  
expansion slot (1).  
Push the clips outward and back into the printer. The  
board will pop out slightly.  
Grip the board firmly by its short edges and pull it out of  
the slot.  
Place the removed memory board in the antistatic bag  
which originally contained the new memory board.  
INSTALLING UPGRADES > 66  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10. Hold the new memory board by its short edges, so that the  
edge connector faces in towards the RAM expansion slot, and  
the small cutout is closer to the bottom of the printer.  
11. Gently push the board into the RAM expansion slot until it  
latches in and will not go any further.  
12. Locate the three retaining clips at the bottom of the side cover  
into their rectangular holes near the bottom of the printer.  
13. Close the top of the side cover up to the printer and refit the  
securing screw removed in step 4.  
14. Close the front cover and close the top cover, pressing down  
firmly at each side to latch it closed.  
15. Reconnect the AC power cable and switch the printer on.  
16. When the printer is ready, print a menu map as follows:  
(a)  
(b)  
(c)  
(d)  
Press the + button to access the Information Menu.  
Press ENTER once for the menu map.  
Press ENTER again to print the menu map.  
When the menu map is printed, press ON LINE to exit the  
menu system.  
17. Examine the first page of the menu map.  
Near the top of the page, between the two horizontal lines, you  
will see the current printer configuration. This list contains the  
figure for total memory size.  
This should indicate the total memory now installed, which  
should be the size of memory board you have installed plus  
32MB.  
INSTALLING UPGRADES > 67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
SECOND PAPER TRAY  
An additional paper tray can be installed and, when combined with  
the standard paper tray, increases the paper capacity to 830 sheets  
(approximately).  
Installation  
1.  
Switch off the printer and disconnect the power cable and  
printer interface cable.  
WARNING!  
The printer weighs 25 kg. 2 people are required to lift the printer  
safely and prevent any personal injury.  
2.  
Lower the printer gently on to the additional paper tray unit  
aligning the holes and connection socket on the base of the  
printer with the locating pegs and plug on the additional paper  
tray unit.  
3.  
Connect the printer interface cable and power cable, then  
switch on the printer.  
All that remains is to adjust the Windows printer driver to make full  
use of the new features.  
INSTALLING UPGRADES > 68  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
ADJUSTING WINDOWS PRINTER DRIVERS  
Once your new upgrade has been installed, you may need to update  
the Windows printer driver so that the additional features are  
available to your Windows applications.  
Remember that if your printer is shared between users on different  
computers, the driver must be adjusted on each users machine.  
The illustrations shown here are for Windows XP. Other Windows  
versions may appear slightly different, but the principles are the  
same.  
If you have installed a memory upgrade it is not necessary to change  
the printer driver, and you can ignore this section.  
If you have installed a duplex unit, proceed as follows:  
1.  
Open the Printers window  
(called Printers and Faxesin  
Windows XP) via the Start Menu  
or from the Windows Control  
Panel.  
2.  
Right-click the printer icon for  
this printer, and choose  
Properties from the pop-up  
menu.  
3.  
4.  
On the Device Options tab,  
check the box for the upgrade you have just installed.  
Click OK to close the properties window, and then close the  
Printers window.  
INSTALLING UPGRADES > 69  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
CLEARING PAPER JAMS  
Provided that you follow the recommendations in this guide on use of  
print media, and you keep the media in good condition prior to use,  
your printer should give years of reliable service. However, paper  
jams occasionally do occur, and this section explains how to clear  
them quickly and simply.  
Jams can occur due to paper misfeeding from a paper tray or at any  
point on the paper path through the printer. When a jam occurs, the  
printer immediately stops, and the LCD window on the operator panel  
informs you of the event. If printing multiple pages (or copies), do not  
assume that having cleared an obvious sheet that others will not also  
be stopped somewhere along the path. These must also be removed  
in order to clear the jam fully and restore normal operation.  
1.  
If a sheet is well advanced out of the top of the printer, simply  
grip it and pull gently to draw it fully out. If it does not remove  
easily, do not use excessive force. It can be removed from the  
rear later.  
2.  
Press the cover release and open the printers top cover fully.  
WARNING!  
If the printer has been powered on, the fuser will be hot. This area is  
clearly labelled. Do not touch.  
CLEARING PAPER JAMS > 70  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
3.  
Note the positions of the four cartridges.  
1
2
1
3
4
1. Cyan cartridge  
3. Yellow cartridge  
2. Magenta cartridge  
4. Black cartridge  
It will be necessary to remove the four image drums to gain  
access to the paper path.  
4.  
Holding it by its top centre, lift the image drum, complete with  
its toner cartridge, up and out of the printer.  
CLEARING PAPER JAMS > 71  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5.  
Put the cartridge down gently onto a piece of paper to prevent  
toner from marking your furniture and to avoid damaging the  
green drum surface.  
CAUTION!  
The green image drum surface at the base of the cartridge is very  
delicate and light sensitive. Do not touch it and do not expose it to  
normal room light for more than 5 minutes.  
6.  
7.  
Repeat this removal procedure for each of the four image drum  
units.  
Look into the printer to check whether any sheets of paper are  
visible on any part of the belt unit.  
4
3
2
1
>
To remove a sheet with its leading edge at the front of  
the belt (1), carefully lift the sheet from the belt and pull  
it forwards into the internal drum cavity and withdraw  
the sheet.  
CAUTION!  
Do not use any sharp or abrasive objects to separate sheets from the  
belt. This may damage the belt surface.  
CLEARING PAPER JAMS > 72  
Download from Www.Somanuals.com. All Manuals Search And Download.  
>
To remove a sheet from the central area of the belt (2),  
carefully separate the sheet from the belt surface and  
withdraw the sheet.  
4
3
2
1
>
To remove a sheet just entering the fuser (3), separate  
the trailing edge of the sheet from the belt, push the  
fuser pressure release lever (4) towards the front and  
down to release the fusers grip on the sheet, and  
withdraw the sheet through the drum cavity area. Then  
allow the pressure release lever to rise again.  
NOTE  
If the sheet is well advanced into the fuser (only a short length is still  
visible), do not attempt to pull it back. Follow the next step to remove it  
from the rear of the printer.  
CLEARING PAPER JAMS > 73  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8.  
Starting with the cyan image drum unit nearest the fuser,  
replace the four image drums back into the drum cavity,  
making sure to locate them in the correct order.  
1
1
2
3
4
1. Cyan cartridge  
3. Yellow cartridge  
2. Magenta cartridge  
4. Black cartridge  
>
Holding the complete assembly by its top centre, lower  
it into place in the printer, locating the pegs at each end  
into their slots in the sides of the printer cavity.  
CLEARING PAPER JAMS > 74  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9.  
Lower the top cover down but do not press down to latch it  
closed yet. This will protect the drums from excessive  
exposure to room lighting while you check the remaining areas  
for jammed sheets.  
10. Open the rear exit tray (5) and check for a sheet of paper in the  
rear path area (6).  
6
5
>
>
Pull out any sheets found in this area.  
If the sheet is low down in this area and difficult to  
remove, it is probably still gripped by the fuser. In this  
case raise the top cover, reach around and press down  
on the fuser pressure release lever (4).  
4
11. If not using the rear exit tray, close it once paper has been  
removed from this area.  
CLEARING PAPER JAMS > 75  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12. If your printer has a duplex unit installed, press the cover  
release at the centre of the unit, open the cover and remove  
any sheets in this area, then close the cover.  
13. Lift the front cover release and pull open the front cover.  
CLEARING PAPER JAMS > 76  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14. Check inside the cover for sheets in this area and remove any  
that you find, then close the cover.  
15. Pull out the paper tray in use when the jam occurred and  
ensure that all paper is stacked properly, is undamaged, and  
that the paper guides are properly positioned against the  
edges of the paper stack. When satisfied, replace the tray.  
16. Finally, close the top cover and press down firmly at both sides  
so that the cover latches closed.  
When the jam has been cleared, if Jam Recovery is set to ON in the  
System Configuration Menu, the printer will attempt to reprint any  
pages lost due to paper jams.  
CLEARING PAPER JAMS > 77  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
Item  
Specification  
Dimensions  
Weight  
425 x 561 x 345mm (W x D x H)  
25Kg  
Print speeds  
Resolution  
Emulations  
Auto Features  
16 pages per minute colour / 24 pages per minute monochrome  
600dpi or 600 x 1200dpi  
Windows GDI  
Auto registration  
Auto density adjustment  
Auto consumable counter reset  
Memory  
32MB standard, upgradable to 96MB or 288MB  
Paper capacity  
300 sheets in main tray  
at 80g/m²  
530 sheets in optional 2nd tray  
100 sheets in multi purpose tray  
Paper weight  
Paper output  
64 ~ 120g/m² in main tray  
64 ~ 176g/m² in 2nd tray  
75 ~ 203g/m² in multi purpose tray  
250 sheets in face down (top) stacker @ 80g/m²  
100 sheets in face up (rear) stacker @ 80g/m²  
Printer life  
Duty cycle  
Toner life  
420,000 pages or 5 years  
50,000 pages per month max., 4,000 pages per month average  
5,000 pages at 5% coverage  
Image drum life 17,000 pages (22,000 pages at continuous print,15,000 pages at  
3 pages per job and 7,500 pages at 1 page per job)  
Belt life  
50,000 A4 pages at 3 pages per job  
45,000 A4 pages  
Fuser life  
SPECIFICATIONS > 78  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
INDEX  
A
I
Image drum  
Additional paper trays.................68  
Advanced features  
how to replace.........................52  
enabling or disabling...............23  
life expectancy ........................44  
Image drums  
B
Belt  
life remaining ..........................43  
how to replace.........................57  
L
Labels  
life expectancy ........................44  
Black printing  
recommended types ................10  
Language  
changing display and reports  
glossy or matte........................20  
Booklet printing  
language................................39  
PCL emulation .........................18  
M
Memory  
C
Colour matching  
installing upgrade ...................65  
Menus  
choosing image source............29  
general advice.........................25  
general settings ......................20  
how to access..........................28  
printing colour swatch .............30  
Colour menu............................38  
how to use ..............................33  
Information menu....................34  
Maintenance menu ..................42  
Media menu ............................36  
Memory menu .........................41  
menu map printing ..................34  
Network menu .........................40  
Print menu ..............................34  
System adjustment menu ........41  
System configuration menu .....39  
Usage menu ............................43  
D
Duplex  
paper size and weight limits ....12  
selecting in Windows...............18  
Duplex unit  
installing.................................63  
E
Envelopes  
loading ...................................16  
USB menu ...............................40  
Multi purpose tray  
F
how to use ..............................16  
Fuser  
paper metrics ..........................11  
how to replace.........................60  
life expectancy ........................44  
INDEX > 79  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Printing  
adjusting image position .........41  
Priority  
print queue priority..................22  
O
Options  
Additional paper trays .............68  
P
Page orientation  
R
setting in Windows ..................19  
Paper  
Resolution  
setting in Windows ..................19  
jam clearing ............................70  
S
loading cassette trays..............13  
loading letterhead ...................14  
recommended types ................10  
size setting in Windows ...........18  
supported sheet sizes..............11  
tray selection in Windows ........18  
weight selection in Windows....18  
Separator page  
separating print jobs on a shared  
printer....................................23  
Spooling  
Windows settings ....................22  
T
Toner  
Poster printing............................18  
Power saving  
how to replace.........................46  
life expectancy ........................44  
delay time ...............................39  
Print order  
life remaining ..........................43  
Transparencies  
face down stacker....................15  
recommended types ................10  
face up stacker........................15  
Print settings  
W
Watermark  
how to save.............................18  
Printer default settings  
printing in Windows.................19  
Windows defaults....................21  
INDEX > 80  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OKI CONTACT DETAILS  
Oki Systems (UK) Limited  
550 Dundee Road  
Oki Data (Singapore) Pte. Ltd.  
78 Shenton Way, #09-01,  
Singapore 079120  
Slough Trading Estate  
Slough, SL1 4LE  
Tel: (65) 221 3722  
Fax: (65)421 1688  
Tel:44 (0) 1753 819819  
Fax:44 (0) 1753 819899  
Oki Systems (Thailand) Ltd.  
956 Udomvidhya Building 6th  
Floor, Rama IV Rd., Bangkok  
10500, Thailand  
Oki Systems Ireland Limited  
The Square Industrial Complex  
Tallaght, Dublin 24, Ireland  
Tel:+353 1 4049590  
Fax:+353 1 4049591  
Tel: (662) 636 2535  
Fax: (662) 636 2536  
Oki Systems (Ireland) Ltd.  
40 Sydenham Park  
Oki Hong Kong Limited  
Suite 1909, Tower3,  
Belfast, BT4 1PW  
China Hong Kong City,  
33 Canton Rd., Tsimshatsui,  
Kowloon, Hong Kong  
Tel:+44 44 (0)28 90 20 1110  
Tel: (852) 2736 0130  
Fax: (852) 2376 3725  
Technical Support for all of  
Ireland:  
Tel: +353 1 4049570  
Fax: +353 1 4049555  
The IPL Group  
63-85 Victoria Street  
Beaconsfield NSW 2015,  
Australia  
Oki Data Corporation  
4-11-22 Shibaura, Minato-ku,  
Tokyo 108-8551, Japan  
Tel: (61) 2 9690 8200  
Fax: (61) 2 9690 8300  
Tel: (81) 3 5445 6158  
Fax: (81) 3 5445 6189  
Comworth Systems Ltd.  
10 Constellation Drive Mairangi  
Bay, Auckland,  
New Zealand  
Tel: (64) 9 477 0500  
Fax: (64) 9 477 0549  
OKI CONTACT DETAILS > 81  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 

Milan Technology Headphones MIL S5000T User Manual
Muratec All in One Printer MK3119 User Manual
Nady Systems Microphone SGM 12 User Manual
NEC Projector PowerLite 30c User Manual
Nikon Digital Camera 26495 User Manual
NordicTrack Home Gym 831157180 User Manual
Olympus Binoculars 10 42 EXWP I User Manual
Oregon Scientific Watch RX109 User Manual
Patton electronic Network Card IM2RC F User Manual
Patton electronic Power Supply 2036 User Manual