Read Me First
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Safety Instructions ..........................................................4
Important Wiring Instructions .......................................5
Printer Features ...............................................................6
Optional Accessories ......................................................6
Check the Contents .........................................................7
Printer Components ........................................................8
Connecting Your Printer .............................................. 13
Installing the Printer Driver ........................................ 14
From Windows™ 3.1x/NT 3.51 ............................. 14
From Windows 95™ ................................................ 14
From Windows™ NT 4.0 ......................................... 14
Changing the Language............................................... 15
Creating Sample Printouts ........................................... 15
Demo Page ................................................................ 15
Sample Font Listing ................................................. 15
Setting Up Your Printer ...................................................9
Remove the Protective Sheet .....................................9
Installing Toner ........................................................ 10
Installing Paper ........................................................ 12
Index ............................................................................. 16
Read Me First
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Instructions
Your Oki printer has been carefully designed to give you
years of safe, reliable performance. As with all electrical
equipment, however, there are a few basic precautions you
should take to avoid hurting yourself or damaging the printer:
• Be certain that your power source matches the rating
listed on the back of the printer. If you are not sure, check
with your dealer or with your local power company.
• Your printer has an earthed, 3-pin plug as a safety feature,
and it will only fit into an earthed outlet. If you can not
plug it in, chances are you have an older, non-earthed
outlet; contact an electrician to have the outlet replaced.
Do not use an adapter to defeat the earthing.
• Read the setup instructions in this handbook carefully.
Be sure to save it for future reference.
• Read and follow all warning and instruction labels on
the printer itself.
• To avoid damaging the power cable, do not put anything
on it or place it where it will be walked on. If the cable
becomes damaged or frayed, replace it immediately.
• Unplug the printer before you clean it. Use only a damp
cloth; do not use liquid or aerosol cleaners.
• Place your printer on a firm, solid surface. If you put it
on something unsteady, it may fall and be damaged; if
you place it on a soft surface, such as a rug, sofa, or bed,
the vents may become blocked, causing the printer to
overheat.
• If you are using an extension cable or power strip with
the printer, make sure that the total of the amperes
required by all the equipment on the extension is less than
the extension’s rating. The total ratings of all equipment
plugged into the outlet should not exceed 13 amperes.
• To protect your printer from overheating, make sure all
openings on the printer are not blocked. Do not put the
printer on or near a heat source, such as a radiator or
heat register. Keep it out of direct sunlight. Allow enough
room around the printer for adequate ventilation and
easy access to the paper trays.
• This printer must be installed near to a power outlet
switch which shall remain easily accessible.
• It is recommended that the printer be switched off prior
to opening or removing covers
• Do not insert anything into the ventilation slots on the
printer; you could get a shock or cause a fire.
• Do not use your printer near water, or spill liquid of any
kind into it.
4
OKIPAGE 10i
Download from Www.Somanuals.com. All Manuals Search And Download.
ImportantWiring Instructions
• Aside from the routine maintenance described in this The wires in the power cable are coloured in accordance with
handbook, do not try to service the printer yourself; the following code:
opening the cover may expose you to shocks or other
Green and Yellow
Blue
—
—
—
Earth
Neutral
Live
hazards.
• Lifting the top cover exposes hot surfaces. These are
clearly labelled. Do NOT touch them.
Brown
If the colours of the wires in the power cable of this printer
do not correspond with the markings of the terminals of your
plug, proceed as follows:
• Do not make any adjustments other than those outlined
in the handbook, you may cause damage requiring
extensive repair work.
• Green and Yellow must be connected to the terminal
marked with the letter E (or the safety earth symbol) or
the terminal coloured Green or Green & Yellow.
If anything happens that indicates that your printer is not
working properly or has been damaged, unplug it
immediately and contact your dealer.
• Brown must be connected to the terminal marked with
the letter L or coloured Red.
These are some of the things to look for:
• Blue must be connected to the terminal marked with the
letter N or coloured Blue or Black.
• The power cable or plug is frayed or damaged.
• Liquid has been spilled into the printer, or it has been
exposed to water.
This printer must be earthed.
• The printer has been dropped, or the cabinet is damaged.
• The printer does not function normally when you are
following the operating instructions.
If you are in any doubt regarding the wiring, please contact
a qualified electrician.
Read Me First
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Printer Features
• Standard manual feed for card stock, envelopes,
transparencies, etc.
• LED 10ppm Page Printer
• 600 × 1200 dpi
• Works with recycled paper
• HP LaserJet 6p (PCL6) compatible
• Duty Cycle – up to 6,000 pages per month
• Printer life – 180,000 pages or five years
• Additional emulations for IBM ProPrinter XL and
Epson FX
• 2Mb memory standard
Optional Accessories
• Multilingual front panel – 12 languages
• High speed, bi-directional parallel interface (IEEE-1284)
• Fast RISC processor for speedy printing (MIPS R3000)
• 500 sheet universal Second Paper Mechanism
• 100 sheet/50 envelope Multi-Purpose Feeder
• PostScript® SIMM
• Enhanced memory management to print more graphics
with less memory
• Flash SIMM
• 1 MB Memory Expansion Board
• SIMM modules for expanding memory
• Serial interface card
• Advanced power saving mode; printer idles on minimum
power to save energy
• 45 scalable resident fonts compatible with the HP
LaserJet 6p
• 10 BaseT Network adaptor card
• Paper output 150 sheets face down, 50 sheets face up
• Paper input tray capacity 250 sheets
• Paper weight – 60 to 120g/m²
6
OKIPAGE 10i
Download from Www.Somanuals.com. All Manuals Search And Download.
Check the Contents
The following sections will lead you through installing your
printer, changing the default language, viewing and changing
the default menu settings and finally producing a Demo Print
Page, a Sample Font Listing and Menu Settings list.
1
2
After unpacking the printer and choosing a suitable place to
put it, check that you have all the necessary parts to continue:
1. Printer
2. Oki Type 5 Image drum cartridge (already installed)
3. Oki Type 5 Toner cartridge
4. Power cable
4
5. User guides
6. Drivers on disk(s).
7
3
6
7. Lightproof plastic bag
(for storing image drum if printer must be shipped).
If anything is missing, contact your dealer for a replacement.
5
Read Me First
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Printer Components
Rear paper exit tray
Top paper exit bin
Manual feed tray
Power switch
Automatic paper
feed tray
Power cable
receptacle
LED array
Image drum cartridge
with toner installed
Bi-directional
parallel interface port
8
OKIPAGE 10i
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting UpYour Printer
The first time you open the top cover will be to install your first
toner cartridge.At this time the power will be off and the printer
cold. When you open the top cover after this, for example to
change the toner cartridge, the fuser area will be hot. This area is
clearly marked. Do not touch it.
Before connecting the printer to your PC and mains outlet,
you must first install the toner cartridge and insert paper in
the paper tray.
Remove the Protective Sheet
3. Remove the protective sheet.
1. Remove any adhesive tape from the outer covers. Press
and open the cover.
Do not touch the Image Drum’s green surface.
2. Remove the image drum.
4. Replace the image drum.
Read Me First
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing Toner
Do not remove cartridge from packaging.
Use OKI Type 5 image drum and toner cartridges only.
1. Remove the sponge and discard.
3. Unwrap the new cartridge.
2. Shake the toner cartridge to evenly distribute toner.
4. Carefully peel off the sealing tape.
10
OKIPAGE 10i
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Insert the cartridge into the printer, left end first as 7. Close the printer cover.
illustrated.
2
1
6. Push the coloured tab forward to release the toner into
the toner hopper.
Read Me First
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing Paper
1. Remove the paper tray from the bottom of the printer and 3. Adjust the paper guides (1).
place plain paper in the tray, carefully keeping the level
of the paper in the tray below the guide marks (1).
1
1
2. Adjust the rear paper support (2) to the size of paper you 4. Replace the tray in the printer. The paper level indicator
are using by lifting up and sliding forwards or backwards
as necessary.
(3) provides a visual indication of how much paper is
left in the tray.
2
3
12
OKIPAGE 10i
Download from Www.Somanuals.com. All Manuals Search And Download.
ConnectingYour Printer
2. Plug the power cable into the printer, then into a grounded
outlet.
Make sure your printer is not plugged in and your
computer is turned off.
1. Plug the interface cable into the parallel socket on the
printer.
3. Switch the printer on.
The parallel cable should support bi-directional communication
and must be shielded.
The Ready light comes on.
Read Me First
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Printer Driver
From Windows™ NT 4.0
From Windows™ 3.1x/NT 3.51
1. Click Start – Run…
1. From the Windows Control Panel, double-click the
Printers icon.
2. Insert the Windows NT 4.0 Printer Driver diskette
supplied with your Oki printer.
2. Click the Install button.
3. Type a:\Setup in the command line box and click OK
.
3. Choose Unlisted Printer from the list of printers.
4. Click the Add button.
4. Continue with the on screen instructions, selecting
the components and drivers for the printer to be
installed.
5. Insert the Oki Windows 3.1x/NT 3.51 driver diskette
into drive A, and click the OK button.
For the latest information, please refer to the README file
6. Select the OKIPAGE 10i printer from the printer list,
on the driver diskettes.
and click OK
.
For drivers supplied on CD, instructions are included with the
CD.
From Windows95™
1. Click Start – Settings – Printers
.
2. Double-click the Add Printer icon and follow the on
screen instructions.
3. Insert the Windows 95 Printer Driver diskette
supplied with your Oki printer.
4. In the printer selection dialogue, click Have Disk…
5. Continue with the on screen instructions, selecting the
components and drivers for the printer to be installed.
14
OKIPAGE 10i
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Language
Creating Sample Printouts
To change the printer's display language to your local language Demo Page
proceed as follows:
1. Press the ON-LINE button so that the display reads
1. Press ON LINE (Ready light off).
OFF-LINE
.
2. Press and hold MENU 1/Menu 2, PRINT MODE appears
2. Press the FORM FEED/Print Demo button for two seconds.
3. The message DEMO HP PCL6 will be displayed.
4. Press ENTER.
in the display window.
3. Press MENU 1/Menu 2 until LANGUAGE appears in the
display window.
4. Press ENTER.
Sample Font Listing
5. Press
until your language appears.
1. Press the ON-LINE button so that the display reads
6. Press ENTER.
OFF-LINE
.
7. Press ON LINE (Ready light on).
2. Press the TRAY TYPE/Print Fonts button for two seconds.
3. The message FONTS HP PCL6 will be displayed.
4. Press ENTER.
Read Me First
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
A
M
S
Accessories 6, 8
Memory 6
Safety first 4
Sample font listing 15
C
Cable
O
T
ON/OFF switch 13
data interface 13
power 5, 7, 13
Cleaning the printer 4
Compatibility 6
Components 8
Optional accessories 6
Toner
installing 10
type 10
Top cover
open buttons 9
Top paper exit bin 8
P
Paper
exit 8
installing 12
Paper tray
D
U
Demo page 15
adjusting guides 12
filling 12
Unpacking contents 7
F
level indicator 12
rear support 12
Parallel cable 13
PPM (Pages Per Minute) 6
Printer Drivers 14
Protective sheet
removing 9
Features 6
Fonts 15
I
Interface cable. See Parallel cable.
L
Language
display 15
changing 15
Locating the printer 4
R
Ready light 13
Rear paper exit 8
16
OKIPAGE 10i
Download from Www.Somanuals.com. All Manuals Search And Download.
|