models nm100 • nc300
Page ꢀ
nm100/nc300 series
operating manual
read and save these instructions
caution
system overview
The NM100 is an intercom and sound system designed for
today’s home. Its compact size and modern, elegant look
complement any décor. The NM100 offers more than just
sensible good looks. It gives you peace of mind as it allows you
to communicate with family members and monitor specified
rooms. The NM100 offers high quality sound throughout your
home from several sources, including the radio, CD player or
other connected audio sources in your home.
to reduce the risk of fire, electric shock, or
injury to persons, observe the following:
1. Read all instructions carefully before installing or using the
NM100/NC300 System.
2. The NM100/NC300 must be installed by a qualified dealer or
installer, and must conform to all local building and electrical
codes.
3. Adhere to all warnings on the NM100/NC300 and in
these instructions. Follow all operating and installation
instructions.
Please read all of the safety instructions before changing any
settings on your NM100.
Keep this manual in a safe place for future reference. If you
lose the manual, you can download it from the NuTone web site
(www.nutone.com).
warning
The NM100 is a retrofit system designed to use your existing
intercom wiring and consists of three major components:
•
Do not expose the NM100/NC300 to moisture. Doing so can
create fire or shock hazards and void the warranty.
•
Master Station
•
Indoor/Outdoor Remote Station—You can install up to 9
Remote Stations in individual zones, 15 Remote Stations in
shared zones on a 4-wire (M&S Systems retrofit) installation
and 13 Remote Stations in shared zones on a 3-wire (NuTone
retrofit), including 2 Outdoor Remote Stations.
•
Do not attempt to service this product yourself as opening or
removing covers may expose you to dangerous voltage or
other hazards and will void your warranty. Neither the Master
Station nor the Room/Patio Stations contain any user-
serviceable parts. REFER ALL SERVICING TO QUALIFIED
SERVICE PERSONNEL.
•
Door Station—You can install up to 3 Door Stations.
The lightning flash with arrowhead symbol within an
equilateral triangle is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude to
constitute a risk of shock to persons.
master station
The Master Station gives you control over the system intercom
and music capabilities. System setup is established at the master.
These settings include: set the clock and establish music auto
on/off times, select the system music source, save preset radio
stations and set the scan mode. System volume, loudness,
treble and bass can also be controlled from the NM100 master.
Intercom functionality for each Remote Station is established
at the master by setting the intercom selector switches. Each
remote station can be set to Intercom Only, Radio and Intercom,
Off, or Monitor.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the product.
•
•
•
Use only NuTone replacement parts and have them installed
by a NuTone dealer or installer. Unauthorized substitutions
can result in fire, electric shock, or other hazards.
The NM100 provides the ability to monitor other stations and
communicate with Door Stations. System functionality can
also be established to provide Security and Home Automation
features.
Upon completion of any service or product repair, have the
NuTone dealer or installer conduct a safety check to ensure
the system is in proper operating condition.
Use only a damp cloth to clean the Master Station, Remote
Stations, Door Stations, and speakers. Do not use liquid
cleaners or aerosol cleaners.
indoor/outdoor remote stations
The Remote Stations provide intercom functions and system
music control capabilities. Depending on the room configuration
at the Master Station, a remote station can communicate with
or monitor other stations and communicate with the Door
Stations. The system’s music can be turned on and off, music
volume adjusted, and music sources changed from the remote
stations.
Download from Www.Somanuals.com. All Manuals Search And Download.
models nm100 • nc300
Page ꢂ
Note: For the first two seconds, the tuner scans at slow speed
to allow for fine tuning. After two seconds, the tuner scans at
fast speed.
preset radio stations
To preset radio stations:
1. Press POWER to turn on the music.
2. Select FM or AM. See Music Settings/Music Source for
instructions.
3. Use TUNE UP or TUNE DOWN to find a station. See Tune
the Radio section for seek and scan functions.
To set the Scan Mode:
4. Simultaneously press TUNE UP and TUNE DOWN to enter
Store Preset mode. The display shows PRESET and a
preset number.
To change the scan mode, simultaneously press and release
PRESET and SOURCE again. The display shows either Scan1
or Scan2.
Note: Exit out of scan mode by pressing PRESET and SOURCE
or waiting for the display to show the clock time again.
5. If you don’t want to assign a preset number, wait 5 seconds
and your selected radio station will automatically be assigned
to the preset number that is displayed. If you want to select
the preset number, press the PRESET button repeatedly to
cycle through numbers1-8 until you reach the preset number
you want.
6. Wait 5 seconds. The display updates to show the new station
for the selected preset number.
audio settings
Note: This activity can be cancelled at any time during
the process by pressing TUNE UP and TUNE DOWN
simultaneously again, and no new preset is stored.
volume
•
Music—Adjusts the volume for system music.
•
Master Station—Adjusts the volume for the speaker on the
Master Station only.
scan mode
•
Intercom—Adjusts the volume for the system intercom.
Two scan modes are available. The scan mode for the room
stations is set at the master. The two scan modes are identified
in the next figure. To set your scan mode:
•
Scan 1—Allows the Indoor/Outdoor Remote stations to scan
through the four music sources (AUX, AM, FM, CD). On
radio bands AM and FM, Scan 1 scans through the preset
radio stations: AM 1-8 and FM 1-8. See Music Settings/Radio
Settings for information on how to preset radio stations.
•
Scan 2—Allows Indoor/Outdoor remote stations to scan
through the four music sources (AUX, AM, FM, CD.) On
radio bands AM and FM, Scan 2 scans all strong stations
before moving on to the next source.
Download from Www.Somanuals.com. All Manuals Search And Download.
models nm100 • nc300
Page ꢃ
Tone
•
•
•
•
Intercom Only
•
•
•
Loudness
Radio/INT (Music source and Intercom)
Treble
Bass
Off
Monitor
To change volume and tone settings:
Note: When the system has more than 9 Room Stations some
intercom selector switches will control two room stations.
1. Press POWER to turn on music. The system defaults to
music volume. Use VOLUME UP and VOLUME DOWN to
adjust the music volume from 0-29. All other audio settings
return to music volume after 5 seconds.
2. Press TONE. Master Volume appears. This controls the
volume for the Master Station speaker only. Use VOLUME
UP and VOLUME DOWN to adjust the Master Volume from
0-29.
Note: When music is off, use VOLUME UP and VOLUME
DOWN to adjust Master Volume.
3. Press TONE. The Loudness function appears. Press
VOLUME UP to turn Loudness on. Press VOLUME DOWN
to turn Loudness off.
4. Press TONE. The Treble function appears. Use VOLUME
UP and VOLUME DOWN to adjust the treble from 0-14.
5. Press TONE. The Bass function appears. Use VOLUME UP
and VOLUME DOWN to adjust the bass from 0-14.
6. Press TONE. Intercom Volume appears. Use VOLUME UP
and VOLUME DOWN to adjust the Intercom Volume from
0-29.
Note: When music is off, press TONE to access Intercom
Volume, then use VOLUME UP or VOLUME DOWN to adjust
Intercom Volume.
intercom
When a station is set to Intercom (Intercom only):
•
•
•
•
You can talk and listen from this station.
The room does not receive music.
The room cannot be monitored.
The room cannot hear other rooms that are set to Monitor.
Note: When a station is set to Intercom, the sound and
activity in that room can be heard by another remote station
by pressing the LISTEN button.
•
The station hears the door chime and users can talk and
listen to the Door Station.
radio and intercom
When a station is set to Radio/INT (Music source and
Intercom):
display brightness
1. Simultaneously press TUNE UP and POWER. The display
cycles through brightness levels: low, medium, and high,
then repeats the cycle.
•
•
•
You can talk and listen from this station.
The room can receive music.
The station can monitor any other station that is set to
Monitor.
2. Press the buttons repeatedly until you reach the brightness
you prefer.
Note: When music is on, the audio from a monitored room is
heard in addition to the music.
intercom selector switch settings
•
The station itself cannot be monitored.
You can set all major Intercom functions using the Intercom
selector switches on the Master Station.
Note: When a station is set to Radio/INT, the sound and
activity in that room can be heard by another remote station
by pressing the LISTEN button.
You can set each station to one of four configurations:
Download from Www.Somanuals.com. All Manuals Search And Download.
models nm100 • nc300
Page ꢄ
•
The station hears the door chime and communicates with
and listens to a Door Station.
security/home automation (optional)
This optional function can control another system that is properly
connected to the NM100. For example, it may control a door
release mechanism, turn on the lights, set off an alarm, etc.
This function is available from the Master Station and Remote
Stations (NRS103WH and NRS104WH). It is not available from
an outdoor remote station.
off
When a station is set to OFF:
•
You can communicate from an Indoor Remote Station but
you cannot communicate from an Outdoor Remote Station.
•
•
•
•
Other Remote Stations cannot listen to the room.
The room cannot receive music or intercom-related audio.
The room cannot be monitored.
To initiate this feature from a room station:
1. Simultaneously press VOLUME UP and VOLUME DOWN
and hold for at least 4 seconds. After 4 seconds, this feature
is active for as long as the buttons are pressed.
The station does not hear the door chime and cannot talk
and listen to the Door Station.
2. Release the buttons to deactivate the feature.
monitor
When a station is set to Monitor:
master station operation
•
Any station set to Radio/INT can continually hear all sound
and activity in the room.
radio operation
1. Press POWER to turn on music.
•
•
•
You can communicate with other room stations.
2. Select either FM or AM as the music source. See Master
The room cannot hear the door chime.
Station
Settings/Music
Settings/Music
Source
for
instructions.
You can talk to the Door Station, but will not be able to listen
to it.
3. Use TUNE UP or TUNE DOWN to select a station, or press
PRESET to select a preset station.
•
The room cannot receive music.
intercom operation
talk
Talk allows users to talk to all stations with selector switches set
to Intercom or Radio/INT.
To initiate a Talk/Listen session, press TALK and begin talking.
You can hear remote users if you press the LISTEN button or if
they press their TALK button.
listen
Press LISTEN to listen to all stations set to Intercom or Radio/
INT.
door talk/listen
•
•
Press TALK and LISTEN simultaneously to enter Door
Talk mode. This allows you to talk to the Door Stations. All
other stations set to Intercom or Radio/INT can hear the
conversation.
Release the TALK and LISTEN buttons to listen to the Door
Station. The Listen mode is active for a total of 25 seconds
after you release the TALK and LISTEN buttons. You may
talk again at any time by pressing TALK and LISTEN. Each
time the buttons are released, you can listen for another 25
seconds.
remote station operation 4-wire (m&s systems
retrofit)
•
Door Talk mode is suspended at the end of the 25 second
listening period or if you press either the TALK button or the
LISTEN button individually.
Remote Station Functions
•
Door Talk/Listen
Press TALK and LISTEN simultaneously to talk to the Door
Stations. Release both buttons to listen.
monitor
•
Listen
All stations set to Radio/INT on the Master Station can continually
hear the sound and activity from a station set to Monitor.
Listen to all stations set to Intercom or Radio/INT.
Download from Www.Somanuals.com. All Manuals Search And Download.
models nm100 • nc300
Page ꢅ
•
•
Talk
remote station operation 3-wire (nutone retrofits)
Talk to all remote stations set to Intercom or Radio/INT.
Speaker Volume
remote station functions
•
•
•
•
Door
Use Speaker Volume knob to adjust the remote speaker
volume.
Press Door to talk to the Door Station. Release button to
listen to the Door Station.
•
Music Volume
Remote
turn music source on and off
Press Remote to talk to Remote Stations. Remote Stations
press Talk to reply.
You can turn the Music Source on and off from the
NRS104WH or the NPS104WH Remote Station.
Speaker Volume
To turn the Music Source on, press and hold the MUSIC
VOLUME UP button.
Use Speaker Volume knob to adjust the remote speaker
volume.
To turn the Music Source off, press and hold the MUSIC
VOLUME DOWN button until the volume level goes to zero.
Music Volume
turn music source on and off
adjust system music volume
You can turn the Music Source on and off from the Remote
Adjust the system music volume from any Remote Station by
pressing VOLUME UP or VOLUME DOWN.
Station.
To turn the Music Source on, press and hold the MUSIC
VOLUME UP button.
•
select music source
The system music source can be selected from any Remote
Station. The music sources that are available vary depending
on the Scan setting on the Master Station (See Master Station
Settings/Music Settings/Scan Mode for details).
To turn the Music Source off, press and hold the MUSIC
VOLUME DOWN button until the volume level goes to zero.
adjust system music volume
Adjust the system music volume from any Remote Station by
pressing VOLUME UP or VOLUME DOWN.
Note: You cannot select specific tracks on the CD from a
Remote Station.
•
select music source
To scan for a music source:
The system music source can be selected from any Remote
Station. The music sources that are available vary depending
on the Scan setting on the Master Station (See Master Station
Settings/Music Settings/Scan Mode for details).
Simultaneously press and release VOLUME UP and
VOLUME DOWN to switch music sources.
Note: You cannot select specific tracks on the CD from a
Remote Station.
To scan for a music source:
Simultaneously press and release VOLUME UP and
VOLUME DOWN to switch music sources.
Note: If you press and hold these buttons for 4 seconds or
more, you initiate the Security/Home Automation function
(See Intercom Operation/Security/Home Automation for
details). This function is not available on the outdoor remote
station.
Note: If you press and hold these buttons for 4 seconds or
more, you initiate the Security/Home Automation function
(See Intercom Operation/Security/Home Automation for
details). This function is not available on the Outdoor Remote
Station.
Download from Www.Somanuals.com. All Manuals Search And Download.
models nm100 • nc300
Page ꢆ
door station functions
cd functions
•
Select Mode
When the button on the Door Station is pressed, the chime is
heard on all stations set to Intercom or Radio/INT.
Available modes:
•
All system audio (music and intercom) is muted when the
chime rings.
- Normal: Play CDs and tracks sequentially
- Repeat Song: Repeat current track
•
If the Door Station is engaged in a talk or listen session, the
chime is not heard.
- Repeat Disc: Repeat current disc from beginning
- Random Disc: Randomly play tracks on current disc
- Random All: Randomly play tracks from all CDs
Press and hold MODE button to display total length of time
and total number of tracks on current CD.
•
Next Disc
Play the next disc. Press and hold to display elapsed time of
current track. Disabled in Random All mode.
•
Previous Track
Play previous track or restart current track. Hold to reverse
through current track. Disabled in Random Disc and Random
All modes.
•
Play/Pause
Press to pause CD. Press again to play.
•
Next Track
Play next track. Press and hold to fast forward through current
track. In Random Disc mode, player selects a random track
from the current disc. In Random All mode, player selects
random tracks from all discs.
cd player operation (optional)
1. Load up to 6 CDs in the CD changer.
2. Press POWER to turn on music.
3. Select CD as the music source. See Master Station Settings/
Music Settings/Music Source for instructions.
When CD is selected as the music source, the display shows
the following information:
•
•
Which CD is playing, indicated by a circle around the CD
number.
The track that is playing, indicated by the number on the
display.
Note: Initially, the display shows six CD positions. If the CD
player reaches a CD position and does not find a CD loaded
at that position, that position number disappears from the
display.
Download from Www.Somanuals.com. All Manuals Search And Download.
models nm100 • nc300
Page ꢇ
Two Year Limited Warranty
WARRANTY OWNER: Broan-NuTone warrants to the original consumer purchaser of its products that such products will be free from defects in materials or workmanship for a period of
two (2) years from the date of original purchase. THERE ARE NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
During this two year period, Broan-NuTone will, at its option, repair or replace, without charge, any product or part which is found to be defective under normal use and service. THIS
WARRANTY DOES NOT EXTEND TO FLUORESCENT LAMP STARTERS OR TUBES, FILTERS, DUCT, ROOF CAPS, WALL CAPS AND OTHER ACCESSORIES FOR DUCTING. This
warranty does not cover (a) normal maintenance and service or (b) any products or parts which have been subject to misuse, negligence, accident, improper maintenance or repair (other
than by Broan-NuTone), faulty installation or installation contrary to recommended installation instructions.
The duration of any implied warranty is limited to the two year period as specified for the express warranty. Some states do not allow limitation on how long an implied warranty lasts, so the
above limitation may not apply to you.
BROAN-NUTONE’S OBLIGATION TO REPAIR OR REPLACE, AT BROAN-NUTONE’S OPTION, SHALL BE THE PURCHASER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS
WARRANTY. BROAN-NUTONE SHALL NOT BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES ARISING OUT OF OR IN CONNECTION WITH PRODUCT
USE OR PERFORMANCE. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This war-
ranty gives you specific legal rights, and you may also have other rights, which vary from state to state. This warranty supersedes all prior warranties.
WARRANTY SERVICE: To qualify for warranty service, you must (a) notify Broan-NuTone at the address or telephone number below, (b) give the model number and part identi-
fication and (c) describe the nature of any defect in the product or part. At the time of requesting warranty service, you must present evidence of the original purchase date.
Date of Installation
Builder or Installer
Model No. and Product Description
IF YOU NEED ASSISTANCE OR SERVICE - CONTACT:
Rev. 08/2007
Garantie limitée de deux ans
GARANTIE DU PROPRIÉTAIRE: Broan-NuTone garantie à l’acheteur original de ses produits que ces derniers seront exmpts de tout défaut de matériaux et de fabrication pour une période de deux (2) ans à
compter de la date d’acha. AUCUNE AUTRE GARANTIE, IMPLICITE OU EXPRESSE, N’EST DONNÉE, Y COMPRIS, MAIS SANS S’Y LIMITER, GARANTIE DE MARCHANDIBILITÉ OU D’ADAPTATION
À UN USAGE PARTICULIER.
Pendant cette période de deux ans, Broan-NuTone procédera au remplacement ou à la réparation sans aucuns frais, mais à sa propre discrétion, de tout produit ou pièce jugé défectueux dans le cadre d’une
utilisation normale. CETTE GARANATIE NE VISE PAS LES DISPOSITIFS D’AMORCAGE NI LES TUBES DES LUMINAIRES FLUORESCENTS. Cette garantie ne couvre pas (a) l’entretien et le service courants
ni (b) les produits et les pièces ayant fait l’objet du’n usage abusif, de négligence, d’un accident, d’un entretien ou d’une réparation non appropriée (par du personnel non autorisé par Broan-NuTone) d’une mauvaise
installation ou d’une installation non conforme aux directives d’installation fournies.
La durée de toute garantie implicite est limitée à la période de deux ans précisée pour la garantie expresse. Certains états ne reconnaissent pas les restrictions relatives à la durée des garanties implicites; il se
pourrait donc que cette restriction ne s’applique pas dans votre cas.
LE REMPLACEMENT OU LA RÉPARATION PAR BROAN-NUTONE, À SA PROPRE DISCRÉTION, DE TOUT PRODUIT OU PIÈCE DÉFECTUEUX CONSTITUE LE SEUL REMÈDE DE L’ACHETEUR
EN VERTU DE CETTE GARANTIE. BROAN-NUTONE NE PEUT ÊTRE TENUE RESPONSABLE DES DOMMAGES INDIRECTS, CONSÉCUTIFS OU SPÉCIAUX ATTRIBUABLES À UTILISATION OU AU
RENDEMENT DU PRODUIT. Certains états ne reconnaissent pas les restrictions ni les exclusions relatives aux dommages indirects, consécutifs ou spéciaux; il se pourrait donc que cette restriction ne s’applique
pas dans votre cas. La présente garantie vous accorde des droits spécifiques, mais vous pourriez aussi avoir d’autres droits en fonction de l’état dans lequel vous résidez. Cette garantie remplace toute autre
garantie donnée précédement.
SERVICE SOUS GRANTIE: Pour être admissible au service sous garantie, vous devez (a) aviser Broan-NuTone, à l’adresse ou au numéro de téléphone ci-dessous, (b) fournir le numéro du modèle et
la description de la pièce et (c) décrire la nature défaut de la pièce ou du produit. Au moment de la demande de service sous garantie, vous devez fournir une preuve de la date d’achat originale.
Date d’installation
Entrepeneur ou installateur
N° de modèle et description du produit
POUR OBTENIR DE L’ASSITANCE OU DU SERVICE - CONTACTEZ:
Rev. 08/2007
Garantia limitada de dos años
GARANTÍA DEL PROPIETARIO: Broan-NuTone garantiza al comprador consumidor original de sus productos, por el período de dos (2) años desde la fecha original de compra, que tales productos están libres de
defectos en material y mano de obra. NO HAY OTRAS GRANTÍAS, EXPRESADOS O SOBREENTENDIDAS, INCLUYENDO, PERO NO LIMITADAS A, GRANTÍAS NO EXPRESADAS DE MERCHNTIBILIDAD
O ADAPTABLES A UN PROPÓSITO EN PARTICULAR.
Durante este período de dos años, Broan-NuTone reparará o reemplazará a su opción y sin costo, cualquier producto o parte que se encuentre defectuoso bajo condiciones normales de uso y servicio. ESTA
GARANTÍA NO CUBRE A LOS ARRANCADORES PARA LÁMPARAS FLUORESCENTES O A LOS TUBOS FLUORESCENTES, FILTROS, DUCTOS, TAPAS DE TECHO, TAPAS DE PARED Y OTROS
ACCESORIOS PARA CANALIZACIÓN. Esta granatía no cubre (a) Mantenimiento y servicios normales (b) Productos o partes sujetos al mal uso, negligencia, accidente, mantenimiento inadecuado o reparaciones
(port otros ajenos a Broan-NuTone), instalación defectusoa o a una instalación contraria a las instrucciones de instalación recomendadas.
La duración de cualquier garantia no expresada está limitada a un periodo de dos años según se especifica en la garantia expresada. Algunos estados no permiten limitación en cuanto a la duración de una grantia
no expresada, por lo que la limitación arriba indicada puede que no se apliqué a Ud.
LA OBLIGACIÓN DE BROAN-NUTONE DE REPARAR O REEMPLAZAR A SU OPCIÓN, SERÁ EL ÚNICO Y EXCLUSIVO RECURSO QUE TENDRÁ EL COMPRADOR BAJO ESTA GARANTÍA. BROAN-
NUTONE NO SERÁ RESPONSABLE POR DAÑOS INCIDENTALES, CONSECUENTES O ESPECIALES QUE RESULTEN A CONSECUENCIA O SEAN INDEPENDIENTE DEL USO O DESEMPEÑO DEL
PRODUCTO. Algunos estados no permiten la exclusión o limitación de daños incidentals o consecuentes, de modo que la limitación o exclusión arriba indicada pueda que no se aplique a Ud. Esta garantia le
proporciona derechos legales especificos, y Ud.puede tener otros derechos, los cuales varían de estado a estado. Esta garantias reemplaza a todas las garantías anteriores..
SERVICO DE GARANTÍA: Para tener derecho al servicio de garantía, Ud. debe (a) Notificar a Broan-NuTone a la dirección o el número de teléfono abajo, (b) indicar el número de modelo y la identifación
de la party y (c) describir la naturaleza de cualquier defecto en la producto o parte. Al momento de solicitor el servicio por la garantía, Ud. debe presentar la evidencia de la fecha original de compra.
Fecha de la instalación
Constructor o instalador
Número de modelo y descripción del producto
SI NECESITA ASISTENCIA O SERIVIVIO - CONTACTO:
Rev. 08/2007
Download from Www.Somanuals.com. All Manuals Search And Download.
|