Enterprise Edge
Feature Programming
Telephone Guide
© 1999 Nortel Networks
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Change the number of times the telephone rings before it is forwarded
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Contents
Making Call Display information appear automatically at a telephone
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents 5
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Contents
Replying to a message using an analog telephone connected to an
Removing items from your message list using an analog telephone
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents 7
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
8 Contents
Stopping calls from ringing at your telephone using Do Not Disturb
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents 9
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
1 0 Contents
Twinning between portables and Enterprise Edge wireline telephones
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents 1 1
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
1 2 Contents
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
1
Your Enterprise Edge telephone system has many powerful features that can be
customized to keep up with changes in your workplace.
Using this guide
This guide provides information for programming system features such as Call
Forward on Busy, Call Forward No Answer, and Hunt Groups, to name just a few.
It also contains information on personal programming, which is done from the
user’s telephone set, such as personal speed dials, transferring a call, and so on.
instructions on changing the time and date, deciding how many rings it takes before
a call is forwarded and other day-to-day programming. Once you understand these
basic steps, you can move on to the many other features described in the other
chapters of the guide.
Emergency 911 Dialing
Emergency 911 Dialing is the capability to access a public emergency response
system by dialing the digits “9-1-1”
Emergency 911 Dialing
State and local requirements for support of Emergency 911 Dialing service by
Customer Premises Equipment vary. Consult your local telecommunications
service provider regarding compliance with applicable laws and regulations.
Understanding programming
When your system is installed, you may program it to work with your telephone
lines, with your private network, if you have one, and with optional equipment.
Programming allows you to customize the system for your office.
You may want to further customize your system. For example, you can change how
some features work, or adapt the system to changes in your office. Programming
allows you to change settings that need to be updated regularly because of staff
turnover or new business contacts. You can also assign features and program
buttons on individual telephones.
There are three ways to customize and maintain your Enterprise Edge system:
•
Installer programming deals mostly with how the system interacts with lines,
telephones, and other equipment.
•
Administrative programming changes how features work for the system, such
as Call Forward No Answer. For example, you may want to program this to
direct unanswered calls to a voice mail system.
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
1 4 Getting Started
•
Personal programming is available to anyone through the Feature button on
their Enterprise Edge telephone. It allows individuals to change how their
telephone works to suit themselves.
Before you start
Before you begin programming, plan what changes you want to make. Record the
changes so that you have the information at hand. For example, if you are going to
program system speed dial numbers, create a record so that you have all the
numbers and codes handy once you start programming.
What you’ll need to do programming
Personal programming is done right on your telephone by pressing the ƒ
button followed by an activation code. For your convenience, a summary of all the
Feature button programming is provided in Appendix A.
Administrative programming is done using the Unified Manager. The Unified
Manager is the tool used to program settings for the Enterprise Edge telephony
features, as well as settings for individual telephones and external lines. Multiple
levels of programming are accessible through the Unified Manager. You access the
Enterprise Edge Unified Manager from your web browser. For more information
about navigation and making selections using the Unified Manager, see the
Enterprise Edge Programming Operations Guide.
Understanding the telephone buttons
Take a few minutes to study the telephone buttons. The M7324 is different from the
M7310 and M7208 in two ways: it does not have dual memory buttons (item 5) or
a shift button (item 6).
Using the buttons under the display
The three display buttons are used for telephone features but what each button does
depends on what the display shows. Some display instructions that you may see
when making changes on the system are OK, CHANGE or COPY. In this guide, display
button instructions are underlined.
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started 1 5
M7310
M7324
5
9
7
8
2
6
1
3
4
4
Display eps Dec. 12
D
display button
1
Dial pad
Used for dialing numbers when you are making calls.
It’s also used for entering numbers and letters when
you’re programming.
2
3
Display
Shows instructions for everyday calling as well as for
programming.
Display buttons
Memory buttons
Have a variety of uses. The current use is shown on the
display above each button.
4
5
Dial a number or feature code stored on the button.
Dual memory buttons Can store two numbers or feature codes (used with the
shift button).
6
7
Shift button
Press the shift button before a dual memory button to
activate the second number or feature code stored on
a dual memory button.
Feature button
Allows you to enter a feature code while using or
programming the telephone.
8
9
Hold button
Puts an active call on hold.
Release button
Hangs up an active call or ends programming.
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
1 6 Getting Started
A map for working in programming
The programming maps on the following two pages show the Enterprise Edge
programming levels. For additional programming information, refer to the
Enterprise Edge Programming Operations Guide.
The Unified Manager is used to:
•
show and hide headings, subheadings and settings by expanding and collapsing
the levels of the list
•
•
•
•
•
add or delete items
change settings by selecting options and entering information
access dialog boxes
accessing menu items
view programming upgrades take effect by refreshing the Unified Manager list
Changes made with the Unified Manager tool become part of current Enterprise
Edge programming as soon as you:
•
•
click Save or press ENTER
click an item in the window other than the setting you just changed (it is no
longer selected)
•
click an item from a list of options
Programming changes are immediate and cannot be undone. If you make a mistake
when programming, you will have to reenter the original programming.
The window for the Unified Manager is split into two parts (panes). The list of
programming headings is on the left pane and attributes are displayed on the right
pane.
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started 1 7
Detailed programming map showing settings
Terminals & Sets
Lines
Line 001-364
DN 221-528
Line access
Line Pool A
Name
Trunk/line data
Trunk type
Line type
Prime line
Intercom keys
OLI #
Dial mode
Line assignment
Line pool access
Answer DNs
Received number
If busy
Prime set
CLID set
Auto privacy
Trunk mode
Answer mode
Answer with DISA
Link at CO
Use auxiliary ringer
Full autohold
Loss package
Signalling
ANI number
DNIS number
Capabilities
DND on busy
Handsfree
HF answerback
Pickup group
Page zone
Paging
Direct dial
Priority call
Aux ringer
Allow redirect
Redirect ring
Restrictions
Call forward
Fwd no answer to
Fwd no answer delay
Fwd on busy to
Hotline
Line restrictions
Remote restrictions
Telco features
Type
Voice message center
Center 1 - 5
ATA settings
ATA answer timer
ATA use
Msg indicate
Name
User preferences
Model
Button programming
User speed dial
Call log options
Dialing options
Language
Display contrast
Ring type
Terminals & Sets (cont’d)
Restrictions
Telco features
First display
Set restrictions
Set lock
Auto called ID
Set log space
Available log space
Allow last number
Allow saved number
Allow link
Feature assignment
Line xxx
Schedules
Line/set restrictions
Call log set
Vmsg set
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
1 8 Getting Started
Detailed programming map (cont’d)
Services
Restriction filters
Filter 00-99
Ringing service
Ring groups
Restrictions
Ring group 001-100
Restriction 01
Sets
Digits
DN xxx
Overrides
Schedules
Override 001
Digits
Night
Service setting
Trunk answer
Extra dial set
Line settings
Line xxx
Ring group
Aux ringer
Evening
Lunch
Sched 4
Sched 5
Sched 6
Restriction service
Night
Service setting
Evening
Lunch
Sched 4
Sched 5
Sched 6
Routing service
Private DN length
Dialing timeout
Services (cont’d)
Routes
Common settings
Control sets
For lines
Route 000
External #
Use pool
Destination codes
xx
Lines 001-364
For sets
DN 221-528
Schedules
Public DN lengths
Schedules
Schedule names
Schedule 0-6
Night
Service setting
Schedule times
Monday-Sunday
Schedules
Night
Evening
Lunch
Sched 4
Sched 5
Sched 6
Evening
Lunch
Sched 4
Sched 5
Sched 6
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started 1 9
Detailed programming map (cont’d)
System speed dial
Companion
Speed dial 01-70
Registration
Registration enabled
Credits available
Portable DNs
DN xxx
DN status
Radio data
System LID
Re-evaluation
Status
External #
Passwords
COS passwords
COS 00-99
Password
User filter
Line filter
Radios
Remote package
Radio xxxx
Radio
Call log passwords
Cell assignment
DN xxx
Antenna type
Password
Cells
Cell 01
Registration password
Password
Cell radios
Cell neighbours
Cell radio neighbours
Time and date
Telco features
yyyyMMddHHmmss
Voice message center numbers
Center 1 - 5
External #
ONN blocking
Tone
Hunt groups
Pulse
Hunt groups 01-30
Mode
Hunt delay
If busy
Queue time-out
Overflow
Name
Software keys
System ID
Members
Member xxx
DN
Appearance type
Line assignment
Line xxx
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
2 0 Getting Started
Detailed programming map (cont’d)
General settings
General settings (cont’d)
Business name
Remote access
Feature settings
Remote access packages
Background music
Package 00
On hold
Remote page
Receiver volume
Camp timeout
Park timeout
Remote line access
Line 001-364
Use remote package
Park mode
Transfer callback timeout
DRT to prime
DRT delay
Change DN type
DN type
Held line reminder
HLR delay
Directed pickup
Page tone
DN lengths
Received # length
DN length
Page timeout
Daylight savings time
Auto time and date
Host delay
Release reasons
Link time
Alarm set
Set relocation
Message reply enhancement
Anskey
Call log space
Direct Dial
Set 1-5
Type
Internal #
External #
Facility
CAP assignment
CAP 1-5
CAP set
Access codes
Park prefix
External code
Direct dial digit
Auto DN
DISA DN
Private access code
Line pool codes
Pool A-O
Access code
Carrier codes
Prefix xxx
Code prefix
ID length
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started 2 1
The M7410 Cordless Telephone (CT)
The M7410 CT allows you to move freely around your workspace and still have full
access to all your Enterprise Edge system features.
The effective operating radio range in your facility will be dependent upon building
construction and the internal layout of the facility. Typically, a dense office
environment will yield an effective operating radio range of 125 to 150 feet.
Operating radio ranges will be enhanced in more open office environments.
Note: Note: Up to 15 M7410 CT users can be accommodated on one Enterprise
Edge system.
The M7410 CT uses advanced digital technology to provide a quality audio path
over a 900 MHz radio link. Establishing calls over a radio link are comparable to
wire line communications but expect small delays when the handset is brought into
service from an on-hook position.
The M7410 CT mixes voice and data communications paths together, making it
very difficult for anyone to tune in and eavesdrop on conversations. The M7410 CT
is equipped with automatic channel scanning capabilities. The M7410 CT
automatically searches for a new channel when interference is detected.
Starting and ending a session
To start a programming session, double-click the Unified Manager icon.
Ending a session
Simply click Close in the browser window.
Record any changes you make in programming. This way if there is a problem with
the system, maintaining a history of the changes you have made facilitates
troubleshooting. Remember to inform people in your office of any changes you
have made that affect them, such as changes to system speed dial codes or changes
to the number of rings before an unanswered telephone is forwarded.
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
2 2 Getting Started
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequent programming operations
2
The following sections highlight the most frequently used programming operations.
You need to start a Unified Manager session to program these features. See Getting
Changing the time and date on the display
The clock controls the schedules used for services such
as ringing and routing. After a power failure, the clock
Passwords
is behind by the length of time power was lost. For
example, if the power is out for two minutes, the clock
is two minutes behind.
Time & Date
General settings
Note: When you change the clock settings in the Unified Manager, you are
changing the clock settings for telephony services. This does not change the
clock setting on the Enterprise Edge server.
1. Select Time & Date.
2. Set the attributes for the year, month, day, hour, minutes, and seconds.
Adding or changing a system speed dial
You program a speed dial on your Enterprise Edge so
that anyone in your office can dial a frequently-used
Services
number using a two-digit code. Examples of system
speed dials might include telephone numbers of
System Speed Dial
regional sales offices within your organization or key
customers that you call frequently.
Passwords
To change a speed dial that already exists, follow the same steps as if you are
creating a new system speed dial. The new programming overwrites the previous
number and settings.
If you are creating a system speed dial for the first time you will need to choose the
type of facility for the system speed dial. For more information about programming
line facilities, see the chapter “Systems Operations” in the Enterprise Edge
Programming Operations Guide.
The system has a standard name to display, so it is not necessary for you to program
one; however, if you choose not to display the telephone number, you may want to
create a more descriptive name.
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
2 4 Frequent programming operations
1. Select System Speed dial.
2. Select the two-digit speed dial code (01 to 70).
3. Type in the telephone number (up to 24 digits) you wish to save as a speed
dial and press Return.
If this is a new speed dial, more fields appear after you press Return.
4. Choose a Facility setting: Use prime line, line:nnn, Pool code:xx, or Use
routing table.
where
nnn is an integer between 001 and 238
xx is a letter between A and O
5. Choose a Display digits setting: Y (Yes) or N (No).
If you choose not to display the digits, the name of the Speed Dial code is
displayed instead of the phone number.
6. Choose a Bypass restrictions setting: Y (Yes) or N (No).
Note: If you assign a specific line to a system speed dial number, only telephones
with an appearance of that line can use the speed dial number.
Changing the name of a telephone
You can add a name to a telephone to further identify the
Terminals & Sets
set within your network. For example, in addition to the
extension number, you might want to add an abbreviated
name of the user (for example, Jean B).
Name
1. Select Terminals & Sets.
2. Select the DN number.
3. Double-click Name.
4. Type in a new name (up to 7 characters including spaces) and press Return.
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequent programming operations 2 5
Changing the name of a line
You can add a descriptive name to a line to further identify
it within your network. For example, in addition to the line
number you may wish to describe the line’s properties (for
example, Local). For more information about
Lines
Name
programming lines, see the “Systems Operations” chapter
in the Enterprise Edge Programming Operations Guide.
1. Select Lines.
2. Select a line number.
3. Double-click Line nnn.
where
nnn is an integer between 001 and 238
4. Type in a new name (up to 7 characters including spaces) and press Return.
Making changes to Call Forward No Answer
You can program a telephone to forward a call when
Terminals & Sets
there is no answer to either an internal telephone (for
example, 221) or an external telephone (for example, 9-
123-4567). Additionally, you can route the unanswered
Capabilities
Call Forward
call to a destination code. For more information about
programming destination codes, see the chapter
“Systems operations” in the Enterprise Edge
Programming Operations Guide.
You may also set Call Forward to forward all calls to either an internal or external
telephone number. This is done at the telephone set by pressing ƒ›. For
1. Select Terminals & Sets.
2. Select a DN number.
3. Select Capabilities.
4. Double-click Call Forward.
5. Choose a Fwd no answer setting: enter an internal or external number, or a
destination code.
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
2 6 Frequent programming operations
Change the number of times the telephone rings before it is forwarded
After you have assigned a Fwd no answer destination, you can set the number of
times the telephone rings before the call is forwarded.
1. Select Terminals & Sets.
2. Select a DN number.
3. Select Capabilities.
4. Double-click Call Forward.
5. Choose a Fwd no answer delay setting: 2, 3, 4, 6 or 10.
Tip
If the Enterprise Edge set is a member of a Hunt Group, the Call Forward no
answer feature is overridden and the Hunt Group call continues to ring until
the hunt time has expired. For more information on Hunt Groups see
Making changes to Call Forward on Busy
You can program a telephone to forward a call when the
Terminals & Sets
line is busy to either an internal telephone (for example,
221) or an external telephone (for example, 9-123-
4567). Additionally, you can route the call to a
Capabilities
Call Forward
destination code. For more information about
programming destination codes, see the chapter
“Systems operations” in the Enterprise Edge
Programming Operations Guide.
You may also set Call Forward to forward all calls to either an internal or external
telephone number. This is done at the telephone set by pressing ƒ›. For
1. Select Terminals & Sets.
2. Select a DN number.
3. Choose Capabilities.
4. Double-click Call Forward.
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequent programming operations 2 7
5. Choose a Fwd on busy to setting: enter an internal or external number, or a
destination code.
Tip
If the Enterprise Edge set is a member of a Hunt Group, the Call Forward on
busy feature is overridden and the Hunt Group call continues to ring until the
hunt time has expired. For more information on Hunt Groups see Programming
Making Changes to Do Not Disturb on Busy
When you are on a call and a second call comes in,
your telephone rings softly to alert you to the second
call. You can turn this feature on or off for each
telephone.
Terminals & Sets
Capabilities
Call Forward
DND on Busy
1. Select Terminals & Sets.
2. Select a DN number.
3. Double-click Capabilities.
4. Choose a DND on Busy setting: Y (Yes) or N (No).
Tip
If the Enterprise Edge set is a member of a Hunt Group and the set activates
this feature, the set does not receive notification of incoming Hunt Group calls
while on a call. The DND on busy feature overrides the Hunt Group. For more
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
2 8 Frequent programming operations
What would you like to do next?
Some of the most common programming tasks are listed below. For a
comprehensive list of settings and instructions, see either the Table of Contents or
the Index.
Redirect calls coming in on a line.
Allow individuals to answer calls that are
ringing at another telephone.
Assign telephones to different zones for
paging.
Turn the night service on and off.
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Answering calls
3
Answering incoming calls with Hunt Groups
Your Enterprise Edge system now allows you to establish Hunt Groups in your
system. Hunt Groups are a group of Enterprise Edge set DNs that can be called by
a single directory number. The Hunt Groups feature ensures calls are easily routed
to the appropriate people. You can program
•
•
•
•
•
the members for a Hunt Group
member position within a Hunt Group
how calls are distributed
how long a call spends looking for available members
what happens if all members are busy
For more information about software packaging, see the Enterprise Edge
Programming Operations Guide.
Answering an incoming call
There are three indications of an incoming call: ringing, a line button flashing, and
a message on the display. You do not necessarily receive all three indications for
any particular call. For example, you may have a line that has been set up not to ring
at your telephone. If so, you see only a flashing line button. There are many possible
combinations, depending on how your system is set up. See Choosing a line using
If you receive a priority call and your telephone has no free internal line buttons,
you cannot transfer the priority call, you must accept or release it.
Line buttons
One line button for each line is assigned to your telephone. Press the line button to
select the line you want to answer or use to make a call. Having several line buttons
gives you immediate access to more than one line.
The M7100 telephone has two intercom paths which are used instead of line buttons
to answer and make calls. Each M7100 can be assigned two lines. You can press
˙ to switch between two calls, one active and one on hold.
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
3 0 Answering calls
What line indicators mean
Flashing on and off for
equal lengths of time
There is an incoming call on the line.
You have placed a call on hold.
º
º
º
º
Flashing on and off
more quickly
Flashing on for longer
than off
Someone else has put a call on hold
on that line.
On, not flashing
You are connected to the call on that
line or the line is in use elsewhere.
Off
The line is free.
Rings you may hear
A double beep every ten
seconds
A call has been camped to your telephone.
There is an external call on the line for you.
A long single ring
A shorter double ring
There is an internal call on the line for you or
a call is being transferred to you.
A brief single ring
A call is being redirected on one of your
redirected lines. You cannot answer this
call.
Three beeps
descending in tone
You are receiving a priority call.
Answering calls at a prime telephone
Each line in an Enterprise Edge system can be assigned a prime telephone. Calls not
answered at their normal destinations are transferred to the prime telephone. The
prime telephone is usually the attendant’s telephone. The installer or customer
service representative programs a prime telephone for a line.
Displays
The person at telephone 221 has forwarded
a call to you using Do Not Disturb.
DND from 221
DND transfer
DRT Line001
The system has transferred a call to you
from a telephone with Do Not Disturb turned
on.
Nobody answered this call so the system
transferred it to you.
Someone has camped, parked or
transferred a call on line 061, but no one has
answered it. Press CALLBACK or the line
button to connect to the call.
Line061 callback
CALLBACK
There is no telephone that can receive a call
on line 061 so the system has transferred it
to you.
Line061 to prime
Line002>Line052
The call coming in on line 002 was intended
for target line 052. Line 052 is busy so the
call has come to you.
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Answering calls 3 1
Using a central answering position (CAP) module
A central answering position (CAP) is an Enterprise Edge M7324 telephone and a
CAP module that your installer or customer service representative programmed as
a CAP. You can have five CAPs connected to an Enterprise Edge telephone. It is
best if the CAP is the prime telephone and direct-dial telephone for the lines and
telephones it serves.
A CAP module is an add-on device that provides 48 extra memory or line buttons.
You can connect one or two Enterprise Edge CAP modules to the telephone to
increase the number of lines it can handle.
When a CAP module is first plugged into your telephone, some of the module
buttons are already programmed to dial an internal number.
Customizing your CAP module
If your installer has programmed the CAP module to be the central answering
position for your system, you can move external lines onto the CAP module by
Any of the buttons on your CAP module that do not select lines can be programmed
to dial internal or external numbers automatically. You can program features onto
buttons.
Buttons on a CAP module cannot be assigned as answer buttons.
Monitoring telephones with the CAP module
The indicators ˆ beside internal autodial buttons on your CAP module show the
status of Enterprise Edge telephones.
The indicator is on when the telephone has:
•
an active call
•
Do Not Disturb turned on
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
3 2 Answering calls
The indicator is off when a telephone has:
•
no active call
•
a call on hold and no other active call
Tip
You can send up to 30 messages from a CAP.
Release button
Pressing ® ends a call. You do not have to put the receiver down. ® also ends
feature programming.
While you are on a call, do not press ® to end a feature you are using. If you do,
you disconnect the call. Use ƒ instead.
Hearing aid compatibility
The receivers on all Enterprise Edge telephones are compatible with hearing aids as
defined in the FCC rules, Part 68, section 68.316. Not all hearing aids are optimized
for use with a telephone.
Viewing information about a call on the display
If you subscribe to Call Display services from your local telephone company, one
line of information about an external caller is displayed after you answer.
Depending on the setting and the external information available, either the caller’s
name or telephone number is displayed.
When you transfer an external call to another Enterprise Edge user, this information
is displayed on the recipient’s telephone.
Call Display information becomes available between the first and second ring of an
incoming call. If you answer before the Call Display information is available on
your display, and you press ƒ°⁄⁄, you see only the line number or line
name.
Using Call Information for a particular call
ƒ°⁄⁄
Call Information allows you to see information about incoming calls. This
information is more detailed than the Call Display information you can receive
automatically. For external calls, you can display the caller’s name, telephone
number, and the line name. For an internal call, you can display the caller’s name
and their internal number. You can see information for ringing, answered, or held
calls.
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Answering calls 3 3
Call Information is available for calls even if they have been transferred, forwarded
or rerouted in some way.
Names and numbers for external calls are displayed only if you have subscribed to
Call Display services from your telephone company.
Tip
Call Log displays the same information as Call Information, along with the
date and time of the call, and the number of times the caller called.
Displaying Call Information before or after answering
To find out who is calling or to display information about your current call:
1. Press ƒ°⁄⁄.
2. Press £ or VIEW to display more information about an external call.
Call Display information becomes available between the first and second ring of an
incoming call. If you answer before the Call Display information is available on
your display, and you press ƒ°⁄⁄, you see only the line number or line
name.
Displaying Call Information for a call on hold
1. Press ƒ°⁄⁄. The display reads ˆSelect a call.
2. Select the line on hold. Information about the call is displayed.
3. Press £ or VIEW to display more information about an external call.
Tip
If your telephone automatically displays Call Display information for a call,
you still need to press ƒ°⁄⁄ before you can press £ or VIEW
to display more information about the call.
Making Call Display information appear automatically at a telephone
Each telephone that rings for an external line can display Call Display information
for that line. After the call is answered, Call Display information is always shown
at the telephone that answered the call. Your installer or customer service
representative can program telephones to have automatic Call Display.
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
3 4 Answering calls
Changing which information is shown first about a call
Depending on the services you subscribe to, Call Display information may contain
up to three parts: the name of the caller, the number of the caller, and the name of
the line in your Enterprise Edge system that the call is on. For each telephone, you
can determine which information is displayed first.
You need to start a Unified Manager session to program this feature. See Getting
1. Select Terminals & Sets.
2. Select a DN number.
3. Select Telco features.
4. Choose a First Display setting: Name, Number, or Line.
You may see Unknown name or Unknown number on the display if the information is not
available from your telephone company. You may see Private name or
Private number on the display if the caller blocks that information.
Picking up a call ringing at another telephone
You can pick up a call ringing at another telephone by using Directed Pickup or
Group Pickup.
Answering any ringing telephone using Directed Pickup
ƒ‡fl
You can answer any telephone that is ringing in your Enterprise Edge system.
1. Press ƒ‡fl.
2. Enter the internal number of the ringing telephone.
Call Pickup cannot be used to answer private lines.
To use Call Pickup (Directed Pickup), the telephone must be ringing. If, for
example, the auxiliary ringer is ringing, but the call is not ringing at a telephone, the
call cannot be answered using Directed Pickup. It must be answered normally at a
telephone that has a flashing indicator for the call, or by using Trunk Answer. You
can answer a call that is ringing because someone has transferred the call to a
telephone and the call is ringing on an intercom button.
Tip
Directed pickup can retrieve calls that are ringing on an Answer DN. While
you may enter the internal number of the telephone you hear ringing, it may be
calls from another telephone you are answering.
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Answering calls 3 5
Answering any ringing telephone using Group Pickup
ƒ‡fi
Your Enterprise Edge system can be divided into nine pickup groups. If you are a
member of a pickup group, you can pick up a call that is ringing at any telephone in
your pickup group.
Press ƒ‡fi.
Group Pickup cannot be used to retrieve a camped call.
If there is more than one incoming call at a telephone in a pickup group, a call
ringing on an external line is answered first followed by calls on the prime line and,
finally, calls on internal lines.
Tip
A Hunt Group call ringing at an Enterprise Edge set DN that is also a member
of a call pickup group can be picked up by any Enterprise Edge set in that call
pickup group. For more information on Hunt Groups see Programming Hunt
Changing a telephone’s pickup group
Telephones can be put into and taken out of pickup groups.
You need to start a Unified Manager session to program this feature. See Getting
1. Select Terminals & Sets.
2. Select a DN number.
3. Double-click Capabilities.
4. Choose a Pickup Group setting: 1, 2, 3, 4, 5, 6, 7, 8, 9, or None.
Displays
You are already connected to the telephone that made the
call you are trying to pick up. This can happen if you are on
a call to a co-worker, your co-worker dials the number of a
telephone in your pickup group, and you attempt to pick up
that call.
Already joined
There is no call that you can pick up or the call that was
ringing has already been answered.
You have tried to pick up a call on someone else’s private
line.
Pickup denied
Pickup:
Enter the internal number of the telephone that is ringing.
(You may use an internal autodial button to do this.)
If you decide not to answer a ringing call after you have
activated Directed Pickup, press ƒ.
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
3 6 Answering calls
Trunk Answer
ƒ°‚‚
The Trunk Answer feature allows you to answer a ringing call anywhere in the
system from any telephone in the system. The line you are answering does not have
to appear or ring at the telephone you are using.
Trunk Answer works only with calls that are ringing on lines for which a Ringing
Service schedule is active and if Trunk Answer is enabled by your installer or
customer service representative.
Answering a call using Trunk Answer
Press ƒ°‚‚.
Tip
If there is more than one incoming call on lines in a Ringing Service, the
Trunk Answer feature picks up the external call that has been ringing the
longest.
Displays
You have tried to pick up a call on someone
else’s private line.
Line denied
The call that is ringing is on a line that is not
in a Ringing Service.
Pickup denied
Answer buttons
You can use an Answer button to monitor calls on another person’s telephone. All
calls to the monitored Enterprise Edge telephone appear on the Answer button.
Answer buttons are useful for attendants who monitor incoming calls for one or
several other people. For example, a secretary may have appearances for three
different bosses on her answer buttons. Once a call for boss A is answered by the
secretary, the appearance stops at that boss’ set. This allows for another
(simultaneous) call to come in on the same line. The same is true for boss B and
boss C. When incoming call traffic becomes high, the calls can then be routed to a
Hunt Group to optimize call handling. For more information on Hunt Groups see
The Answer button setting in Feature settings programming allows you to
determine what types of calls alert at the telephone. Your choices are: Basic,
Enhanced and Extended.
See the Enterprise Edge Programming Operations Guide for more information on
programming Answer buttons.
M7100 telephones cannot be assigned Answer buttons to monitor other sets, but
they can be monitored.
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Answering calls 3 7
You cannot make calls using Answer buttons.
If more than one call is ringing at someone’s telephone, the first call appears on the
attendant’s Answer button. Any subsequent calls appear on intercom buttons, if
they are available.
Tip
More than one attendant may have an Answer button for a single telephone.
This allows two or more attendants to handle calls for a busy person.
Each telephone can handle calls for up to eight other people using a separate
Answer button for each person.
Creating a Conference Call
ƒ‹
You can talk to two people at once.
1. Make sure you have two calls, one active and one on hold.
2. Press ƒ‹.
3. Press the appropriate button to retrieve the held call (this is automatic on the
M7100 telephone).
You can create a conference when you are on a call.
1. Make a second call.
2. Press ƒ‹.
3. Press the button where the first call is on hold to create a conference.
Only the person who established the conference can process the conference by
using the procedures described in this section.
Tip
You can create a conference by releasing privacy on a call. See Turning
Disconnecting one party
You can disconnect one party from a conference and continue talking to the other.
On a M7208, M7310 or M7324 telephone:
1. Press the line button of the call that you want to disconnect. The call that you
want to keep is automatically put on hold.
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
3 8 Answering calls
2. Press ®. The call is disconnected.
3. Press the line button of the held call to speak to the remaining person.
On a M7100 telephone:
1. Press ƒ£‹, to place one caller on hold. Press ˙ again, to put
the caller you want to keep on hold.
2. Press ®. The call is disconnected.
3. Press ˙ to speak to the remaining party.
Independently holding two calls
For all Enterprise Edge telephones except the M7100 telephone, you can put the two
people in a conference call on hold independently so that they cannot talk to each
other.
1. Press the line button of one person. The other person is automatically put on
hold.
2. Press ˙. The second person is put on hold.
You can re-establish the conference.
3. Take one call off hold.
4. Press ƒ‹.
5. Take the other call off hold.
Putting a conference on hold
You can put a conference on hold, allowing the other two people to continue
speaking to each other by pressing ˙.
You can reconnect to the conference by pressing either of the held line buttons. For
the M7100 telephone, press ˙.
Splitting a conference
You can talk with one person while the other person is on hold.
On a M7208, M7310 or M7324 telephone
•
Press the line button of the person to whom you want to speak. The other person
is automatically put on hold.
On a M7100 telephone:
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Answering calls 3 9
1. Press ƒ£‹. The first party is on hold.
2. Press ˙, if necessary, to switch parties.
You can re-establish the conference.
3. Press ƒ‹.
4. Take the held call off hold. This is not necessary for the M7100 telephone.
Removing yourself from a conference
ƒ‡‚
You can remove yourself from a conference, and connect the other two callers
through your Enterprise Edge system.
Enter the Transfer feature code ƒ‡‚.
When you remove yourself from a conference using the Transfer feature, and both
callers are from outside your system, one of the callers must have called you on a
disconnect supervised line, or the call is be disconnected.
Displays
You are trying to add a fourth party to your conference
call, or to join two conferences together. Release one
call from the conference before adding another, or
keep the two conferences separate.
3 parties only
You have put a conference call on hold.
Conf. on hold
You have tried to make a conference call, but your
system is already handling its maximum number of
conference calls.
Conference busy
You are on a conference with the two lines or
telephones shown. You can drop out of the conference
and leave the other two parties connected
(Unsupervised Conference) by pressing TRANSFER or
entering the Transfer feature code.
Line001 221
TRANSFER
You have activated the Conference feature with one
call active and another on hold. Press the line of the
call on hold to bring that person into the conference.
Press held line
Listening to a call as a group
ƒ°‚¤
To allow people in your office to listen in on a call using Group Listening, press
ƒ°‚¤.
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
4 0 Answering calls
You hear the caller’s voice through your telephone’s speaker. Continue to speak to
the caller through the telephone receiver. Your telephone’s microphone is off, so
the caller does not hear people in your office.
Canceling Group Listening
ƒ£°‚¤
Group Listening is canceled automatically when you hang up or when you press
ƒ£°‚¤.
Tip
Keep the receiver away from the speaker, or you may hear feedback. The
higher the volume, the more the feedback. Press ® to prevent feedback
when hanging up.
Using Handsfree/ Mute
The ability to use Handsfree must be turned on or off for each telephone. The type
You must turn on Handsfree for a telephone to be able to use a headset.
Answering calls without lifting the receiver
1. Press the line button for the ringing call. (This step is not necessary if you
have a prime line assigned to your telephone.)
2. Press ©. The telephone’s internal microphone and speaker are
automatically turned on.
Handsfree is not available for a M7100 telephone.
Tip
Direct your voice toward the telephone. The closer you are to the telephone,
the easier it is for the microphone to transmit your voice clearly to your
listener.
Making calls without lifting the receiver
1. Press ©. (If you don’t have a prime line assigned to your telephone,
press a line button.)
The telephone’s internal microphone and speaker are automatically turned on.
2. Dial your call.
3. Speak normally.
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Answering calls 4 1
Muting Handsfree
1. Press © to switch off the telephone microphone so that you can speak
privately to someone in your office while you are on a handsfree call.
2. Press © to turn the microphone back on again and continue your
handsfree call.
Changing a regular call to handsfree
1. Press ©.
2. Hang up the receiver.
Changing a handsfree to a regular call
Lift the receiver.
Using Handsfree
The indicator next to © is solid when you have Handsfree turned on. It
flashes when you mute the microphone.
Wait for your caller to finish speaking before you speak. The microphone and
speaker cannot both be on at once. Your caller’s voice may be cut off if you both
speak at the same time. Noises such as a tapping pencil could be loud enough to turn
on your microphone and cut off your caller’s speech.
To prevent a possible echo, keep the area around your telephone free of paper and
other objects that might screen your microphone. Turning down the microphone’s
volume (press the left end of √ while speaking) prevents echoes. When
you change the volume level, both the microphone and speaker volume are adjusted
to prevent feedback problems.
Place the telephone so that any unavoidable local noise (such as an air conditioner)
is behind it. This limits the amount of disruptive background noise.
Tip
In open-concept environments, use the receiver when handsfree
communication is not necessary or when you need privacy during a call.
Another option is to use a headset.
Changing Handsfree for a telephone
You can program the type of Handsfree used with each telephone or activate
Handsfree Answerback.
You need to start a Unified Manager session to program this feature. See Getting
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
4 2 Answering calls
1. Select Terminals & Sets.
2. Select a DN number.
3. Double-click Capabilities.
4. Choose a Handsfree setting: None, Auto, Standard.
There are three ways to set Handsfree for an individual telephone:
Handsfree is not available to the telephone.
Handsfree:None
CHANGE
You can make or answer a call without having to
pick up the receiver or press ©. The
telephone’s internal microphone and speaker turn
on automatically when you press a line or
intercom button to make or answer a call.
Handsfree:Auto
CHANGE
Handsfree:Std
CHANGE
Both Auto and standard Handsfree allow you to use a headset with an Enterprise
Edge telephone.
A Handsfree/Mute button is automatically assigned to a telephone that is
programmed with Handsfree and is always located in the lower right-hand corner
of the telephone.
Handsfree Answerback
Handsfree Answerback allows you to answer a voice call without lifting the
receiver. It is always turned off for a M7100 telephone.
You can turn Handsfree Answerback on or off for a telephone that is programmed
to use Handsfree.
You need to start a Unified Manager session to program this feature. See Getting
1. Select Terminals & Sets.
2. Select a DN number.
3. Double-click Capabilities.
4. Choose an HF answerback setting: Yes or No.
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Answering calls 4 3
Turning Privacy on or off for a call
ƒ°‹
Lines in your system can be configured to have automatic privacy. If a line is not
programmed with privacy, anyone with the line assigned to their telephone can join
your call by pressing the line button. If a line is programmed with privacy, only one
person at a time can use the line.
Privacy control cannot be used on internal or conference calls.
When another telephone joins a call, the participants on the call hear a tone, and a
message appears on the Enterprise Edge display. You cannot join a call without this
tone being heard.
Creating a conference by releasing privacy
If a line is programmed with privacy, you can turn privacy off to allow another
person with the same line to join in your conversation and form a conference. All
the rules applicable to a conference apply except there is only one line in use,
instead of the normal two. This means that you cannot split a conference set up
using Privacy.
1. Press ƒ°‹.
1. Tell the other person to press the line button and join your conversation.
Only two Enterprise Edge telephones in addition to the external caller can take part
in this kind of conference.
Making a call private
If a line is programmed not to have privacy, you can turn privacy on for a call,
preventing other people with the same line from joining your conversation.
Press ƒ°‹.
Checking call length using Call Duration Timer
ƒ‡‡
By pressing ƒ‡‡, you can see how long you spent on your last call, or
how long you have been on your present call.
Displays
The display shows the last call you made, or the
current call, and the total elapsed time in minutes
and seconds.
221 02:47
You parked your last call. The display shows the
length of time the call was parked. You cannot see
the length of time a call was parked unless the call
is active at your telephone or has just been
released by your telephone.
Line061 01:45
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
4 4 Answering calls
Disconnecting by accident
If you accidentally drop the receiver back into the telephone cradle while answering
a call, you can quickly retrieve the call.
Pick up the receiver again or press © within one second to be reconnected
to your call.
Time
Press ƒ°‚‹ to display the current date and time while you are on a call.
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Making calls
4
There are many ways to make a call, depending on the programming and the type
of call, as follows:
•
•
•
•
•
•
Pick up the receiver and dial. The Enterprise Edge system supports three
Pick up the receiver, press a line button, and dial (if the call is not on your prime
line).
Press ©, press a line button, and dial (to talk without the receiver and if
the call is not on your prime line).
Press a line button and dial (to talk without the receiver and if Automatic
Handsfree is assigned to your telephone).
Use one of the features that make dialing easier. See Time savers for making
Displays
The telephone you have called has no internal lines
available. Press LATER to use the Ring Again or
Message features or press PRIORITY to make a
priority call.
221 busy
PRIORITY
LATER
You are dialing using Pre-dial. To erase an incorrect
digit, press the left end of√ or BKSP. When
the number is complete, select a line or lift the receiver.
9__
QUIT
BKSP
This prompt remains on your display as long as you
are on a call you have dialed. To transfer the call, press
TRANSFER.
95551234
TRANSFER
Your telephone is already connected to the telephone
you are trying to call. Check your active line buttons,
and return to that call.
Already joined
Wait for the telephone to be answered. If no one
make a priority call.
Calling 221
PRIORITY
LATER
You cannot use Ring Again on your current call. You
can only use Ring Again while you have a busy signal
on an internal call or line pool request or while an
internal call is ringing.
Can't ring again
The telephone you are calling has Do Not Disturb
turned on. Press LATER to use the Ring Again or
Messages features, or press PRIORITY to make a
priority call.
Do not disturb
PRIORITY
LATER
You have dialed a number, but the least expensive
route that the system is programmed to use is busy.
Unless you release the call, it goes through on a more
expensive route.
Expensive route
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
4 6 Making calls
The last number you dialed or the number you saved
for Saved Number Redial was a speed dial number
that displayed a name rather than the number. The
number is dialed correctly, but you cannot see it.
Hidden number
You have attempted to use someone else’s private
line.
Line denied
Enter the digits of the number you want to dial.
Line061
TRANSFER
You have not dialed an external telephone number
since the last power interruption or system reset.
No last number
No line selected
Not in service
Either you have no prime line or your prime line is
busy. Select a line manually before dialing.
You have entered the number of a telephone that is not
in service.
The telephone you have called is on another call.
Press LATER to use the Ring Again or Message
features.
On another call
LATER
The call you are trying to make has been restricted in
programming. A possible reason is time-of-day
restrictions on certain calls.
Restricted call
Press YES to use Ring Again. Press NO to send a
Ring Again?
YES
NO
EXIT
Either you have no prime line, or the prime line is in
use, or the line programmed for an autodial number,
speed dial number, or Hotline is in use. Select a line
and dial again.
Select a line
Press YES to send a message. See Messages.
Send message?
YES
NO
Choosing a line using a line button
You have one line button for each line assigned to your telephone. Press the line
button to select the line you want to answer or use to make a call. Having several
line buttons allows you immediate access to more than one line.
The M7100 telephone has two intercom paths which are used instead of line buttons
to answer and make calls. Each M7100 can be assigned two lines. You can press
˙ to switch between two calls, one active and one on hold.
Line pools
A line pool is a group of external lines that can be shared by many telephones. You
can use a line in a line pool to make an external call.
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Making calls 4 7
The Enterprise Edge system can have 15 line pools plus 6 PRI pools, and a
telephone can be programmed to access any number of them.
A line pool access code is a number you dial to get a line pool. The access code can
be up to four digits long. You can have several different line pools for your system,
each one giving you access to a different set of external lines. It is one way of
sharing lines across telephones in a system.
Your installer programs the line pool access codes and gives each telephone access
to a line pool.
Everyone in the office should have a list of the line pool access codes for the line
pools their telephones can use.
Using a line pool to make a call
ƒfl›
1. Press ƒfl›.
2. Enter a line pool access code.
If you have a free internal line, you can make a call using a line pool without
entering the feature code first.
1. Select an internal line (intercom).
2. Dial the line pool access code.
Tip
If no lines are available in the line pool, you can use Ring Again at the busy
tone. You are notified when a line in the line pool becomes available.
Programming a memory button with a line pool feature code
When you program a button with the line pool feature code, you must enter a line
pool access code after the feature code. The programmed line pool button accesses
page 90 for more information.
If you program a button with an indicator to access a line pool, when all the lines in
a line pool are busy, the indicator for the line pool button turns on. The indicator
turns off when a line becomes available.
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
4 8 Making calls
Changing how you dial your calls
ƒ•°¤
1. Press ƒ•°¤.
2. Press £ or NEXT until the dialing mode you want appears.
3. Press ˙ or OK to select the displayed dialing mode.
The dialing modes feature code cannot be programmed onto a memory button.
Using Standard dial
Standard dial allows you to make a call by selecting a line and dialing the number.
If you have a prime line, it is selected automatically when you lift the receiver or
press ©.
You cannot use Standard dial on a M7100 telephone unless you pick up the receiver
first. If you have a M7100 telephone, use the Automatic dial or Pre-dial feature for
on-hook dialing.
Using Automatic dial
Automatic dial allows you to dial a number without selecting a line. Your prime line
is selected as soon as you start dialing a number.
Automatic dial does not work if your telephone has no prime line or if your prime
line is in use.
Telephones connected to an Enterprise Edge Analog Terminal Adaptor (ATA2) or
an Enterprise Edge Analog Station Module (ASM) cannot use Automatic dial.
Using Pre-dial
Pre-dial allows you to enter a telephone number, check it, then change it before
actually making the call. The call is not dialed until you select a line or line pool, or
pick up the receiver. You can pre-dial both external and internal numbers. You
must, however, select the correct type of line (external or internal) for the type of
number you have entered.
Tip
If your telephone starts ringing while you are pre-dialing a number, you can
stop the ringing by turning on Do Not Disturb (ƒ°fi). This does
not affect numbers you are entering.
You cannot pre-dial a telephone number if all the lines on your telephone are
busy.
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Making calls 4 9
When the internal number you have called is busy
Priority Call
ƒfl·
If you get a busy signal or a Do Not Disturb message when you call someone in your
office, you can interrupt them. Use this feature for urgent calls only.
Tip
Priority calls cannot be made to Hunt Group DNs. For more information on
Making a priority call
1. Press ƒfl·.
2. Wait for a connection, then speak.
A person who receives a priority call while on another call has eight seconds to
page 109. If the person does nothing, the priority call feature puts their active call,
including conference parties, on Exclusive Hold and connects your call.
Giving a telephone the ability to make priority calls
You need to start a Unified Manager session to program this feature. See Getting
1. Select Terminals & Sets.
2. Select a DN number.
3. Double-click Capabilities.
4. Choose a Priority Call setting: Yes or No.
Displays
You tried to place a priority call to another Enterprise
Edge telephone. The person you called has blocked
your call. Try to call later.
Call blocked
The party you are calling has eight seconds to decide
whether to accept or reject your priority call.
Please wait
The telephone you are calling has already received a
priority call or is unable to receive priority calls.
Priority denied
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
5 0 Making calls
You can make a priority call only while your telephone displays:
221 busy
PRIORITY
LATER
LATER
LATER
Calling 221
PRIORITY
Do not disturb
PRIORITY
On another call
PRIORITY
LATER
Using Ring Again
ƒ¤
Use Ring Again when you call someone on your Enterprise Edge system and their
telephone is busy or there is no answer. Ring Again can tell you when they hang up
or next use their telephone. You can use Ring Again to tell you when a busy line
pool becomes available.
Tip
The Ring Again feature cannot be used when calling a Hunt Group DN. For
Turning on Ring Again
ƒ¤
Press ƒ¤ before you hang up.
Using Ring Again cancels any previous Ring Again requests at your telephone.
Canceling Ring Again
ƒ£¤
Press ƒ£¤ to cancel a Ring Again request.
Displays
You cannot use Ring Again on your current call. You
can only use Ring Again while you have a busy signal
on an internal call or line pool request, or while an
internal call is ringing.
Can't ring again
Press YES to use Ring Again. Press NO if you prefer to
send a message.
Ring Again?
YES
NO
EXIT
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Time savers for making calls
5
Storing a number on a memory button for Autodial
You can program memory buttons for one-touch dialing of internal or external
telephone numbers.
Buttons used for lines, answer or Handsfree/Mute cannot be used as autodial
buttons. If the power to your Enterprise Edge system is off for more than three days,
autodial numbers (as well as some other system programming) may be lost from the
memory.
Adding an autodial button
ƒ•⁄ or ƒ•¤
1. Press ƒ•⁄ to program an external number or ƒ•¤ for an
internal number.
2. Choose a button and then enter the number as if you were dialing it.
When programming Autodial you can use:
•
•
•
•
Last Number Redial
Saved Number Redial
destination codes (choose ∆ as the line)
host system signalling
Choosing a line for Autodial
To include a line selection for an external number, press the line or intercom button
before you enter the number. To select a line pool, press a programmed line pool
button, or press ∆ and enter a line pool access code.
If you select a line before pressing the autodial button, the call goes out on the line
you have selected instead of the line that is part of the autodialer programming.
For the M7100 telephone, an external autodialer can be programmed only by using
a line and not a line pool.
Tip
If you do not include a line selection in an autodial number, the call uses your
prime line (if you have one).
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
5 2 Time savers for making calls
Using intercom as the line for Autodial
If you press ∆ as the line for an external autodial number, you must include
a valid line pool access code or a destination code. If line pool access codes or
destination codes are changed, remember to reprogram autodial numbers.
Displays
Continue to enter digits until the number is complete. Press
√ or BKSP to erase an incorrect digit. Press
˙ or OK when you are finished.
987___
QUIT
BKSP
OK
The memory allotted to autodial numbers in your Enterprise
Edge system is full.
Autodial full
Button erased
While programming external Autodial, you erased the button by
pressing ˙ or OK before entering any digits.
Enter the number you want to program (choosing the line first if
necessary) exactly as if you were making a call.
Enter digits
QUIT
OK
Enter the internal telephone number you want to program.
Intercom #: ___
QUIT
You are programming an internal autodial button and have
entered a number that is not an internal number on your system.
Enter a valid internal number. If the number you are entering is
a destination code, use external autodial.
Invalid number
Press the memory button you want to program.
Press a button
QUIT
Enter the number you want to program onto the button, then
press ˙.
Program and HOLD
Enter the number you want to program onto the button, then
press ˙ or OK. You may include a line or line pool
selection in an autodial sequence by selecting the line before
entering any digits.
Program and OK
QUIT
OK
The number is stored on the button.
Programmed
Using Last Number Redial
ƒfi
Press ƒfi to redial the last external number you dialed.
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Time savers for making calls 5 3
Last Number Redial records a maximum of 24 digits.
Tip
If you have a programmed Last Number Redial button, you can use Button
Inquiry (ƒ•‚), then press the Last Number Redial button
followed by £) to check the last number before you dial it.
Preventing a telephone from using Last Number Redial
Last Number Redial can be restricted at individual telephones.
You need to start a Unified Manager session to program this feature. See
1. Select Terminals & Sets.
2. Select a DN number.
3. Choose Restrictions.
4. Double-click Set restrictions.
5. Choose an Allow last number setting: Yes or No.
Displays
The last number you dialed was a speed dial number
that displayed a name rather than the number. The
number is dialed correctly, but you cannot see it.
Hidden number
You have not dialed an external telephone number
since the last power interruption or system reset.
No last number
Tip
You can copy a number onto an autodial button using Last Number Redial.
Using Speed Dial
Enterprise Edge provides two types of speed dialing: system and personal. System
Speed Dial programming allows you to assign two-digit speed dial codes to the
external numbers your co-workers call most frequently. Personal or User Speed
Dial programming allows individuals to program their own speed dial numbers.
Speed dial numbers are subject to the same restriction filters as regularly dialed
numbers. Your installer can program system speed dial numbers to bypass dialing
restrictions.
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
5 4 Time savers for making calls
Speed dial numbers may include host system signaling codes.
Making a speed dial call
ƒ‚
1. Press ƒ‚ to quickly dial external telephone numbers that have been
programmed onto speed dial codes.
2. Enter the appropriate two-digit speed dial code.
Changing and adding System Speed Dials
System Speed Dial codes are numbered from 01 to 70. The system administrator
assigns numbers to System Speed Dial codes for the entire system. See Adding or
Tip
There is no difference between using User Speed Dial and using System
Speed Dial. They differ only in how you program them.
Adding or changing User Speed Dial
ƒ•›
To add or change a User Speed Dial number on your telephone:
1. Press ƒ•›.
2. Enter a two-digit code from 71 to 94 that you want to associate with a
telephone number.
3. To include a line selection for this number, press the line or intercom button.
To select a line pool, press a programmed line pool button, or press ∆
and enter a line pool access code. For the M7100 telephone, you can select
only a line pool.
4. Enter the number you want to program.
5. Press ˙ or OK.
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Time savers for making calls 5 5
Displays
Continue entering the number you want to program.
01:9___
CANCL
You can change the number by pressing BKSP or
√. When you are finished, press
˙ or OK.
BKSP
OK
OK
Enter the telephone number you want to program
exactly as if you were dialing it normally. When you are
finished, press ˙ or OK.
Enter digits
QUIT
You have entered a code outside the code range
(01-70 for system, 71-94 for personal).
Invalid code
There is no number stored on the speed dial code you
have dialed.
No number stored
Program and HOLD
If you want to program a line or line pool selection for
this speed dial number, select the line or line pool.
Otherwise, enter the telephone number exactly as if
you were dialing it normally. When you are finished,
press ˙.
If you want to program a line or line pool selection for
this speed dial number, select the line or line pool.
Otherwise, enter the telephone number you want to
program exactly as if you were dialing it normally.
When you are finished, press OK.
Program and OK
QUIT
OK
There is no line associated with the speed dial number
you are trying to use. Select a free external line or line
pool and enter the speed dial feature code again.
Select a line
The system cannot dial the number stored. Reprogram
the number.
Unknown number
Using Saved Number Redial
ƒfl‡
You can save the number of the external call you are on (provided you dialed the
call) so that you can call it again later. Each telephone can save one number at a time
with Saved Number Redial, not one number for each line.
Tip
You can copy a number onto an autodial button using Saved Number Redial.
Saving a number
Press ƒfl‡ while you are on the call.
Saved Number Redial records a maximum of 24 digits.
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
5 6 Time savers for making calls
Dialing a saved number
Press ƒfl‡ when you are not on a call.
If you have a programmed Saved Number Redial button, you can use Button
Inquiry (ƒ•‚) to check the last number before you dial it.
Preventing a telephone from using Saved Number Redial
Saved Number Redial can be restricted at individual telephones.
You need to start a Unified Manager session to program this feature. See A map for
1. Select Terminals & Sets.
2. Select a DN number.
3. Choose Restrictions.
4. Double-click Set restrictions.
5. Choose an Allow saved number setting: Yes or No.
Displays
You have saved a speed dial number that displays a
name rather than the number. The number is dialed
correctly, but you cannot see it.
Hidden number
You have tried to save the number of an incoming call.
You can only save numbers that you have dialed
yourself.
No number saved
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Handling many calls at once
6
Using Hold
You can temporarily suspend a call by pressing ˙.
When a call is on hold, its indicator flashes on all telephones that have access to the
line. The call can be retrieved from any of these telephones.
On the M7100 telephone, ˙ alternates between two lines; one active, one on
hold. The M7100 telephone cannot retrieve a call placed on hold by another
telephone.
Tip
Answered Hunt Group calls can be placed on hold at the answering Enterprise
Edge set. For more information on Hunt Groups see Programming Hunt
Retrieving a held call
You can connect to a call on hold by pressing the flashing line button of the held
call.
Holding automatically
If your line has been programmed with full autohold, you can switch from one call
to another and have your calls put on hold automatically.
Press the line button of the second caller. Your current caller is put on hold
automatically.
Listening on hold
If you have been put on hold, you can hang up the receiver while you wait for the
other person to return.
1. Press ˙.
2. Hang up the receiver.
3. Press the line button of the call. You may hear indications from the far end
that you are on hold (for example, tones or music).
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
5 8 Handling many calls at once
4. When the person returns, that is, you hear them through your telephone
speaker, simply lift the receiver to resume the conversation.
Tip
If Automatic Handsfree has been assigned to your telephone, you can use the
Handsfree/Mute feature instead of Listen on Hold.
Holding a call exclusively
ƒ‡·
You can put a call on Exclusive Hold so that it can be retrieved only at your
telephone.
Press ƒ‡· or ƒ˙. The line appears busy on all other
telephones, and the call cannot be picked up by anyone else in the office.
Displays
You have placed one or more calls on hold. The name
of the line that has been held the longest is displayed.
On hold: LINENAM
Using Call Queuing
ƒ°‚⁄
If you have more than one call ringing at your telephone, you can choose the call
that has the highest priority by pressing ƒ°‚⁄.
Call Queuing answers incoming external calls before callback, camped, and
transferred calls.
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Transferring calls
7
Using the transfer feature
ƒ‡‚
Transfer allows you to direct a call to a telephone in your Enterprise Edge system,
within the Enterprise Edge network, or external to Enterprise Edge.
Transferring a call
1. Press ƒ‡‚.
2. Call the person to whom you want to transfer the call.
3. If you want to talk to the person, wait for them to answer and speak to them
before proceeding.
4. When you are ready to complete the transfer, press ® or JOIN.
You cannot use Last Number Redial, Saved Number Redial, a speed dial code,
Priority Call or Ring Again to dial the number for a transfer.
Depending on how a private network call is routed, it may not always be possible
for the system to return a transferred call to you if the transferred call is not
answered. When transferring a call to a private network destination, stay on the line
until the person to whom you are transferring the call answers.
You cannot use the Line Pool feature code to access a line pool for a transfer. To
use a line pool, use a programmed line pool button, or press ∆ and enter a
line pool access code.
If you have an auxiliary ringer programmed to ring for calls on an external line, and
you transfer a call on that line without announcing the transfer, the auxiliary ringer
rings for the transferred call.
Transferring external calls
If an external call is transferred to a busy telephone, or not answered after a few
rings, the call automatically rings again at the telephone from which it was
transferred, and the display indicates that the telephone was busy or that no one
answered.
When transferring an external call to an external number, the external call you are
trying to transfer must be an incoming call on a disconnect supervised line.
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
6 0 Transferring calls
While on a conference call, you can remove yourself from the conference and
connect the other two callers using the Transfer feature. However, if both of the
other people are from outside the system, at least one of the outside callers must
have called you and both of the outside calls must be on disconnect supervision
lines.
Note: Transfer via Hold on DID lines is not supported. Once a call is answered the
line appearances on all other sets are free immediately to take other calls.
This allows a greater number of calls to be received. Use the Call Park
feature to transfer a call.
In certain situations, you may experience lower volume levels when transferring an
external call to an external person, or when transferring two external callers from a
conference call.
Canceling a transfer
You can reconnect to the person you are trying to transfer at any time before the
transfer is complete.
1. Press ƒ£‡‚ or CANCL.
2. If you are not reconnected to your original call, press ® and then press the
line key of the original call, which is now on hold.
Displays
You are talking to the person you want to transfer the call
to. Press RETRY if you decide to transfer the call to
someone else. Press ® or JOIN to transfer the call.
221>222
CANCL
RETRY JOIN
The person to whom you tried to transfer a call did not
answer. Press CALLBACK or the flashing line button to
reconnect to the call. On the M7100 telephone, lift the
receiver.
221 no reply
CALLBACK
The person to whom you tried to transfer a call has Do Not
Disturb active on their telephone. Press JOIN to transfer the
call anyway. Press RETRY to transfer the call to someone
else. Press CANCL or the flashing line button to reconnect
to the call (on the M7100 telephone, press
Do not disturb
CANCL
RETRY JOIN
ƒ£‡‚).
You entered an invalid internal number. Press RETRY and
enter the number again.
Invalid number
CANCL
RETRY
The external caller you were transferring hung up before
the transfer was complete.
Line061 hung up
Press JOIN to transfer the call on line 061 to telephone 221.
Press RETRY if, after talking to the person at extension 221,
you decide to transfer the call to someone else.
Line061>221
CANCL
RETRY JOIN
The telephone to which you are trying to transfer a call is
out of service.
Not in service
CANCL
RETRY
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Transferring calls 6 1
You cannot transfer the call because of telephone or line
restrictions.
Restricted call
CANCL RETRY
Complete the transfer in progress before you access a new
feature, answer another alerting call or select an outgoing
line.
Still in trnsfer
CANCL RETRY
Your transfer cannot be completed for one of these
reasons:
Transfer denied
CANCL RETRY
All the resources needed to perform a transfer are in use.
Try again later.
You have tried to transfer an external call to another
external party. Some restrictions apply.
You cannot transfer your conference call.
Press RETRY if you entered the wrong internal number or if
the person to whom you are transferring the call is
unavailable.
Transfer to:2___
CANCL RETRY
Using Camp-on
ƒ°¤
You can transfer an external call to another telephone, even if all of its lines are
busy.
1. Press ƒ°¤.
2. Dial the number of the telephone to which you want to camp the call.
Camped calls appear on a line button on the receiving telephone, if one is available.
If there is no line button available, you receive a message on the display and hear
Camp tones.
Each Enterprise Edge telephone can handle only one camped call at a time.
Displays
You tried to camp a call to a telephone that already has a
camped call. The call has come back to you. Press the
CALLBACK button or the line button to reconnect to the call.
On the M7100 telephone, just pick up the receiver.
221 Camp max
CALLBACK
The person to whom you redirected a call has Do Not
Disturb active on the telephone. The call has come back to
you. Press the CALLBACK button or the line button to
reconnect to the call. On the M7100 telephone, just pick up
the receiver.
221 DND
CALLBACK
You have tried to camp an internal call. You can only camp
external calls.
Camp denied
Dial the number of the internal telephone to which the call
is sent.
Camp to:
CANCL
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
6 2 Transferring calls
The telephone to which you camped a call did not answer
the call. The call has come back to you. Press CALLBACK or
the line button to reconnect to the call. On the M7100
telephone, just pick up the receiver.
Camped: 221
CALLBACK
A call you camped has come back to you, but the caller
hung up before you could reconnect.
Line061 hung up
The telephone to which you have camped a call is out of
service or is being used for programming. The call has
come back to you. Press CALLBACK or the line button to
reconnect to the call. On the M7100 telephone, just pick up
the receiver.
Not in service
CALLBACK
The line that the camped call is on is in use or that line does
not appear at your telephone. Release the line or release
an internal line.
Release a call
Parking a call
ƒ‡›
You can suspend a call so that it can be retrieved from any telephone in your system.
1. Press ƒ‡›.
2. Use the Page feature (ƒfl‚) or press PAGE to announce the retrieval
code displayed by your telephone.
Retrieving a parked call
1. Select an internal line. (On the M7100 telephone, pick up the receiver.)
2. Dial the Call Park retrieval code.
Using Call Park
When you park a call, the system assigns one of 25 codes for the retrieval of the call.
These codes consist of the Call Park prefix, which may be any digit from 1 to 9, and
a two-digit call number between 01 and 25. For example, if the Call Park prefix is
1, the first parked call is assigned Call Park retrieval code 101.
The Enterprise Edge system assigns Call Park codes in sequence, from the lowest
to the highest, until all the codes are used. This round-robin approach means that a
greater variety of codes are used, which makes it easier for a call to reach the right
person when more than one incoming call is parked.
The highest call number (the Call Park prefix followed by 25) is used only by
analog telephones or devices connected to the system using an Enterprise Edge
ATA2 or an Enterprise Edge ASM. Analog telephones or devices cannot use the
other Call Park codes.
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Transferring calls 6 3
Your installer programs both the Call Park prefix and the delay before parked calls
are returned to the originating telephone. External calls parked for longer than the
programmed delay are returned to your telephone.
Tip
Answered Hunt Group calls are parked in the same manner as other calls. For
Call Park can be disabled by your installer.
Displays
The person you were talking to has already parked your
call. You cannot park the same call.
Already parked
No call to park
Invalid number
No call on: 101
Park denied
You have attempted to use Call Park with no active call on
your telephone. If the call you want to park is on hold,
reconnect to it before you park it.
You have entered an invalid retrieval code.
There was no call on the retrieval code you entered.
You have tried to park a conference call. Split the
conference and park the calls separately. The person who
retrieves the calls can reconnect the conference.
Record the code shown. Use Page (ƒfl‚) or
press PAGE to announce the call and its retrieval code.
Parked on: 402
PAGE
EXIT
All available retrieval codes are in use. Transfer the call or
take a message instead.
Parking full
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
6 4 Transferring calls
Using Callback
When you direct a call you have answered to another telephone, the system
monitors the call to make sure it is answered. If no one answers the call within a set
length of time, the system directs it back to you.
Callback generates a variety of displays. Most occur after a set delay and are listed
in the index. Some occur immediately if the telephone to which you are directing a
call is out of service or otherwise unavailable. These are listed with the descriptions
of the specific features such as Transfer or Camp-on.
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Forwarding your calls
8
Forwarding your calls to another telephone
ƒ›
Press ƒ› and enter the number of the telephone to which you want your
calls forwarded. You can forward your calls to an internal or external telephone. To
forward your calls to an external destination you must enter the route plus the
dialing digits of the external telephone. For example, if your system requires you to
dial 9 for external calls then you must enter 9 plus the dialing digits to forward your
calls to an external number.
You can also use Line Redirection to forward calls outside the system. Line
redirection takes precedence over Call Forward.
Canceling Call Forward
Press ƒ£›.
Using Call Forward at your telephone
When you use ƒ›, all calls go to the destination you select, regardless of
how Forward on busy and Forward no answer are programmed.
To allow external destination programming, you must program Allow redirect to
Yes for each set, in Terminals&Sets, Capabilities.
Tip
If your Enterprise Edge set is a member of a Hunt Group, the Call Forward all
calls setting is overridden by the Hunt Group routing for Hunt Group calls. For
If the telephone to which you forwarded your calls does not have the same external
lines as your telephone, the forwarded calls appear on intercom buttons.
If a call is forwarded, it does not ring but the line indicator flashes on your
telephone. You can answer the call by pressing the button next to the flashing
indicator.
Tip
If you are one of a group of people who regularly forward their calls to one
another, be aware that it is possible to set up forward loops where a call is
forwarded from one telephone to another in a circle, and is never answered
anywhere.
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
6 6 Forwarding your calls
Overriding Call Forward
If you call someone who has their calls forwarded to you, your call rings at that
person’s telephone even though they are forwarding their calls to you.
Changing the automatic Call Forward settings for a telephone
Call forwarding can be programmed to forward a call when it is not answered or the
line is busy. You can also define the number of times the telephone rings before
forwarding takes place. These features must be programmed by starting a Unified
Manager session.
Changing Forward no answer
Forward no answer redirects unanswered calls to another telephone on your
Enterprise Edge system.
Tip
If the Enterprise Edge set is a member of a Hunt Group, the Call Forward no
answer feature is overridden and the Hunt Group call continues to ring until
the hunt time has expired. For more information on Hunt Groups see
Line Redirection takes precedence over Forward no answer.
For step-by-step instructions for changing Forward no answer see Making changes
Changing the delay before a call is forwarded
You can assign the number of times that the incoming call rings at your telephone
before the call is forwarded. To estimate the delay time in seconds, multiply the
number of rings by six.
For step-by-step instructions, see Change the number of times the telephone rings
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Forwarding your calls 6 7
Forward on busy
Forward on busy redirects your calls to another telephone on your Enterprise Edge
system when you are busy on a call, or when you have Do Not Disturb activated at
your telephone. For step-by-step instructions, see Making changes to Call Forward
Line Redirection takes precedence over Forward on busy. Calls that are redirected
by Line Redirection are not affected by any Call Forward features or Call Forward
programming.
Telephones that have Forward on busy active can receive priority calls. If you are
busy on a target line call, another call to that target line is redirected to the prime
telephone for that target line.
Tip
If the Enterprise Edge set is a member of a Hunt Group, the Call Forward on
busy feature is overridden and the Hunt Group call continues to ring until the
hunt time has expired. For more information on Hunt Groups see
DND on Busy
When you are busy on a call and a second call comes in, your telephone rings softly
to alert you to the second call. If you find this second ring distracting, you can have
the system prevent a second call from disturbing you by assigning Do Not Disturb
(DND) on Busy to your extension.
When DND on Busy is turned on for the set, internal and private network callers
hear a busy tone instead of ringing when you are on the telephone. External callers
are transferred to the prime set used in your system. For step-by-step instructions,
If you use DND on Busy, the line indicator for an external incoming call flashes,
but your telephone does not ring.
Forward on busy takes priority over DND on Busy.
If an external call uses a target line, the call is processed according to the
programming of the target line. If the target line is busy, the caller may hear a busy
tone or be routed to the prime set for the target line regardless of the DND on Busy
programming for the telephone.
Tip
If an Enterprise Edge set is a member of a Hunt Group and the set activates
this feature, the set does not receive notification of incoming Hunt Group calls
while on a call. The DND on busy feature overrides the Hunt Group. For more
Call Forward and voice mail
If you want a voice mail system to pick up unanswered calls automatically
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
6 8 Forwarding your calls
•
use the internal number of your voice mail as the destination when you program
Forward no Answer and Forward on busy
or
•
make the ring delay greater than the delay used by your voice mail system, if
your voice messaging system or service automatically retrieves calls
Displays
There are several reasons why you may get this
message. For instance, you cannot forward your calls
to a telephone that has been forwarded to your
telephone.
Forward denied
Your calls are being forwarded to telephone 221.
Forward>221
CANCL
Two or more telephones are linked in a forwarding
chain, and one of them is out of service or is being
used for programming.
Not in service
Line Redirection
Line Redirection allows you to send your external calls to a telephone outside the
office. You may choose to redirect all your external lines or only some of them.
Line Redirection takes precedence over the Call Forward feature. If both features
are active on a set, incoming external calls on redirected lines are routed to the
specified Selective Line Redirection (SLR) external destination. Incoming internal
calls are forwarded to the specified Call Forward destination.
You cannot use the Line Redirection feature on either a M7100 telephone or a
telephone connected to an Enterprise Edge ATA2 or an Enterprise Edge ASM.
Turning on Line Redirection
ƒ°›
1. Press ƒ°›.
2. Select the outgoing line to be used for redirected calls.
3. Enter the number to which calls are redirected (the ways you can do this are
listed below).
4. Select the lines to be redirected.
Enter the telephone number to which you want to redirect calls, using one of the
following methods:
•
Press an external autodial button.
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Forwarding your calls 6 9
•
•
Enter an external telephone number (using no more than 24 digits) then press
˙ or OK.
Press ˙ or OK if the line you have chosen as the outgoing line is a private
network line that does not require you to dial digits.
If you use ALL to redirect all your lines, it is important that you wait until all the lines
on your telephone light up before pressing ˙ or OK. If you press ˙ or
OK before all the lines light up, those lines not lit are not redirected.
Tip
The line chosen for redirecting calls on other lines can be used normally when
it is not busy on a redirected call. To avoid redirection failing because the
chosen line is in use, choose a line pool with several lines in it.
The system does not check that the number you give for line redirection is a
valid one. If you redirect to an invalid number, redirection fails. Using an
autodial button to enter the redirection number helps avoid this possibility. An
autodial button used for line redirection must be programmed to use a specific
line.
Canceling Line Redirection
ƒ£°›
1. Press ƒ£°›.
2. Select the lines you no longer want to be redirected.
Allowing a telephone to redirect calls
You can turn a telephone’s ability to redirect calls on and off.
You need to start a Unified Manager session to program this feature. See Getting
1. Select Terminals & Sets.
2. Select a DN number.
3. Double-click Capabilities.
4. Choose an Allow redirect setting: Yes or No.
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
7 0 Forwarding your calls
Turning the redirect ring for a telephone on or off
You can program a telephone to ring briefly (200 milliseconds) when a call is
redirected on one of its lines.
You need to start a Unified Manager session to program this feature. See Getting
1. Select Terminals & Sets.
2. Select a DN number.
3. Double-click Capabilities.
4. Choose a Redirect ring setting: Yes or No.
Tip
If a telephone has redirect ring enabled, it rings briefly for redirected calls on
one of its lines even if another telephone set up the line redirection.
Displays while redirecting lines
You selected the intercom button as the facility on
which to place the call. Enter a line pool code or a
destination code.
Intercom
Press • or ADD to begin redirection. Press £ or
Line Redirection
QUIT
REMOVE to cancel a previous redirection.
ADD REMOVE
You have one external line on your telephone, but you
need a second line to perform line redirection. Redirect
your external line using a line pool as the outgoing line.
No line to use
You are attempting to redirect a line and the line you
have chosen is the outgoing line you have selected as
a destination. You cannot redirect a line to itself. Select
another line.
Outgoing line
Enter a valid line pool access code.
Pool code: ___
QUIT
You have attempted to redirect a line, but someone
else has already redirected that line. Press • or
OVERRIDE to override the previous redirection and
redirect the line as you want.
Redir by 221
OVERRIDE
You can redirect calls only on individual lines.
Redirect denied
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Forwarding your calls 7 1
Select the line that is used to redirect calls out of the
system.
Select line out
QUIT
Press the lines to be redirected. To undo a line
selection, press it again. Press ALL to redirect all your
lines.
Select line(s)
QUIT
ALL
Continue to press the lines to be redirected. Press
˙ or OK when you are finished.
Select line(s)
ALL
OK
The line you are attempting to redirect cannot be
redirected because the hardware does not support
redirection.
Unequipped line
Displays while canceling redirection
Press the lines that are no longer to be redirected. The
Select line(s)
QUIT ALL
lines light up as you press them. Once you cancel
redirection for a line you cannot restore it by pressing
the line again. Press ALL to cancel redirection for all
your lines. When you are finished, press ˙ or
OK.
Continue to press the lines that are no longer to be
redirected. Press ˙ or OK when you are
finished.
Select line(s)
ALL
OK
How Line Redirection is different from Call Forward
Call Forward forwards all calls that arrive at a particular telephone to an internal or
external telephone. Line Redirection redirects only the lines you specify, no matter
which telephones they appear on, to a telephone outside the Enterprise Edge
system. Line Redirection takes precedence over Call Forward.
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
7 2 Forwarding your calls
Using Line Redirection
You redirect lines at a telephone, but once redirected, the lines are redirected for the
entire system.
You can redirect only lines that appear at line buttons on your telephone.
You can answer the telephone if it rings while you are in the middle of
programming Line Redirection, but none of the Enterprise Edge call handling
features are available until the feature times out. If you need to use an Enterprise
Edge feature to process the call, quit Line Redirection programming by pressing
ƒ. Do not press ® or you disconnect the call you are trying to process.
While you are programming Line Redirection you do not receive any indication of
calls that do not actually ring at your telephone.
Be careful to avoid redirection loops. If for example, you redirect your lines to your
branch office and your branch office redirects its lines to you, you can create a
redirection loop. If these calls are long distance, you end up paying charges.
In certain situations, callers may experience lower volume levels when you redirect
calls to an external location.
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Communicating in the office
9
Paging
ƒfl‚
Paging allows you to make announcements over the Enterprise Edge system using
the telephone speakers, or your loudspeaker system, if one is available.
Making a page announcement
1. Press ƒfl‚.
2. Choose a page type. Page types are:
⁄ through the telephone speakers (internal page)
¤ through an external speaker (external page)
‹ both internal and external (combined page)
3. If necessary, choose a zone.
4. Make your announcement.
5. Press ®.
Tip
Instead of entering the Page feature code followed by the page type, you can
enter the following shortcut codes.
Page zone 0 is all zones.
Internal
ƒfl⁄ and zone (0 to 6)
ƒfl¤ (code 2 has no zones)
ƒfl‹ and zone (0 to 6)
External
Combined
Activating and deactivating the ability to page
You need to start a Unified Manager session to program this feature. See Getting
1. Select Terminals & Sets.
2. Select a DN number.
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
7 4 Communicating in the office
3. Double-click Capabilities.
4. Choose a Paging setting: Yes or No.
Creating page zones
Each telephone can be assigned to one of six zones for receiving pages.
Tip
Hunt Group DNs cannot be included in a page zone. For more information on
You need to start a Unified Manager session to program this feature. See Getting
1. Select Terminals & Sets.
2. Select a DN number.
3. Double-click Capabilities.
4. Choose a Page zone setting: 1, 2, 3, 4, 5, 6, or None.
You can make a telephone part of a page zone only if the telephone has paging set
to Y (Yes).
A zone is any set of Enterprise Edge telephones that you want to group together for
paging, regardless of their location. The maximum number of sets in a page zone is
50.
Your installer programs whether a tone sounds before a page begins, and the
maximum number of seconds a page can last before it is automatically turned off.
Tip
Make sure that everyone who needs to make page announcements has a list
showing which telephones are in which page zones.
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Communicating in the office 7 5
Displays
Enter the desired page zone number (0- 6) or press ALL.
Enter zone:___
ALL
You have entered a page zone code that is not between 0 and 6.
Invalid zone
Page choice:
SETS
SPKR BOTH
The time allotted for paging has expired.
Page timeout
You are making a page. The display shows the page zone you have
chosen. Press ƒ or ® when you are finished.
Paging ALL
A page is already being made in the page zone you have requested.
Paging busy
Tip
You can make an announcement to one person by placing a voice call to their
telephone.
Using Page with external paging equipment
When you make a page that uses external paging equipment (external page or
combined page), the Long Tones feature is automatically activated for the external
paging system only. This allows you to control optional equipment with the Long
Tones feature.
Sending messages
The Messages feature allows you to leave a message on the display of another
Enterprise Edge telephone or to analog telephones connected to an Enterprise Edge
Analog Station Module (ASM). The Messages feature indicates if you have any
messages waiting.
The Messages feature uses a message waiting list to keep a record of your internal
messages and your (external) voice mail messages (if you subscribe to Enterprise
Edge Voice Messaging service with visual message waiting indication).
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
7 6 Communicating in the office
Sending a message
ƒ⁄
You can leave a message on the display of another telephone in your Enterprise
Edge system.
You can send up to four messages to different telephones, including your message
center. If your telephone is a direct-dial telephone or an Enterprise Edge CAP, you
can send up to 30 messages.
Only the designated direct-dial telephone for an analog telephone connected to an
Enterprise Edge ASM can send messages to analog telephones by pressing
ƒ⁄. Depending on the programming setup, the analog telephone provides
either a Stuttered Dial Tone or a Message Waiting Lamp to inform the user of
messages pending.
If your reply to a message is forwarded or is answered at another telephone using
the Call Pickup feature, the message remains on your telephone until you cancel it
or successfully contact the telephone that sent the message.
For analog telephones connected to an Enterprise Edge ASM, the message waiting
indicator remains on until the user invokes ˚£flfi. If the analog
telephone has the Message Reply Enhancement feature set to Yes, the message
waiting indicator is turned off automatically after the reply call is answered no
matter from where the call is answered.
For more information on the Message Reply Enhancement feature, see the
Enterprise Edge Programming Operations Guide.
1. Press ƒ⁄.
2. On a telephone with a two-line display, press ADD. (This step is not necessary
on a telephone with a one-line display.)
3. Enter the internal number of the person to whom you want to send the
message. The person’s display reads Message for you.
4. On analog telephones connected to an ASM, the message waiting indicator is
activated.
Canceling a message you have sent
1. Press ƒ£⁄. The display reads Cancel for:.
2. Enter the internal number of the person to whom you sent the message.
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Communicating in the office 7 7
Viewing your messages
ƒflfi
You can receive up to four messages from different telephones, including your
message center. A single message from your message center may pertain to several
messages.
On a telephone with a one-line display
1. Press ƒflfi. The display shows the first message.
2. Press • or £ to move through your messages.
On a telephone with a two-line display
1. Press MSG. The display shows the first message you received.
2. Press NEXT to move through your messages.
Replying to a message
You can call the person (or your message center) who sent a message while you are
viewing the message.
On a telephone with a one-line display
•
Press ‚.
On a telephone with a two-line display
Press CALL.
•
If you want to call your message center using a line other than the programmed line,
exit your message list and dial the message center telephone number using normal
dialing methods.
Replying to a message using an analog telephone connected to an ASM
On an analog telephone connected to an ASM
•
Press ˚•flfi. The system automatically retrieves and connects the
user to the oldest message sender. (The message can originate from either the
designated direct-dial telephone or the internal voice mail system.)
If the analog telephone has the Message Reply Enhancement feature set to Yes, and
the sender is the designated direct-dial telephone, the message waiting indicator is
turned off automatically after the reply call is answered, no matter from where the
call is answered.
For analog telephones connected to an ASM, using the Message Waiting Reply
feature (˚•flfi), retrieves only internal messages sent to the user.
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
7 8 Communicating in the office
Analog telephones connected to an ASM cannot retrieve external messages by
using the Message Waiting Reply feature (˚•flfi). For external
messages, users must call back the external voice mail center to retrieve their
messages. When doing so, the message waiting indicator on the analog telephone is
turned off automatically.
Tip
If Enterprise Edge Voice Messaging is not installed, only the designated
direct-dial telephone can send messages to an analog telephone connected to
an ASM using ƒ⁄. The analog telephone can in turn invoke a
single digit access code to reach the designated direct-dial telephone and
retrieve messages.
If the designated direct-dial telephone of an analog telephone connected to an
ASM is changed, messages sent by the previous designated direct-dial
telephone are kept in the incoming message list of the analog telephone until
they are retrieved.
Removing items from your message list
You can erase a message while you are viewing it in your message list. If the
message is from your message center, this only erases the message notification at
your telephone. You need to erase the message at your message center. Refer to
your message center documentation.
On a telephone with a one-line display
•
Press ˙.
On a telephone with a two-line display
Press ERASE.
•
Removing items from your message list using an analog telephone connected to
an ASM
To remove both internal and external messages on an analog telephone connected
to an ASM
•
Press ˚£flfi to invoke the Cancel Message Waiting feature.
On analog telephones connected to an ASM, the Cancel Message Waiting feature
cancels the oldest message received. The system no longer provides either a
Stuttered Dial Tone or a Message Waiting Lamp if there are no messages pending.
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Communicating in the office 7 9
Viewing messages you have sent
ƒ⁄
On a telephone with a two-line display, you can view the messages you have sent.
1. Press ƒ⁄.
2. Press SHOW to display your first sent message.
3. Press NEXT to move through your sent messages.
Displays
You have entered an invalid number when attempting to cancel a
message.
Cancel denied
You have cleared an external message from your message waiting
list. The message itself exists in your message center until you erase
it there.
Cleared>LINENAM
NEXT
You are trying to call from your message waiting list. The line that
you are trying to use is being used by the identified Enterprise Edge
user.
In use: 221
You are viewing your message list. The display shows the number
and name of the line that was used for your message.
CLEAR
L061:LINENAMVMsg
NEXT
CALL
You have tried to send a message to an invalid internal number or to
a telephone that is out of service.
Message denied
SHOW appears only if you have outstanding messages. Press SHOW
to review messages you have sent. Press ADD to send a new
message.
Message list
SHOW
ADD
EXIT
Enter the internal number of the telephone to which you want to send
a message.
Message to:
You have one or more messages and one or more new Call Logs.
Press ƒ°‚fl to change the first line of the display to
the current time and date.
Messages & Calls
MSG CALLS
You have no line button free with which to reply to a message.
No button free
There has been no number programmed for the message center.
Contact your voice messaging service provider.
No number stored
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
8 0 Communicating in the office
You are at the beginning of your list of messages. Press NEXT to
move through your messages.
Start of list
NEXT
You are trying to send a message to a user whose message waiting
list is full.
Their list full
Your list full
You have tried to send a message but your telephone’s list of sent
messages is full. Cancel one of the messages you have sent, if
possible, or wait until you have received a reply to one of those
messages.
Using Voice Call
ƒflfl
You can make an announcement or begin a conversation through the speaker of
another telephone in the system.
Tip
Hunt Groups cannot accept voice calls. Answer buttons have no appearances
for voice calls, and the set does not ring for voice calls. For more information
Making a Voice Call
Press ƒflfl.
Muting Voice Call tones
When a voice call begins at your telephone, you hear a beep every 15 seconds as a
reminder that the microphone is on. To stop it from beeping, pick up the receiver or
press ©.
Answering a Voice Call without touching your telephone
If Handsfree Answerback is assigned to your telephone, you can respond to a voice
call without touching the telephone. Handsfree Answerback is not available to the
M7100 telephone.
When someone makes a voice call to you, simply start talking. Your telephone’s
microphone picks up your voice. Once you have answered a voice call, you can put
it on hold, transfer it, or otherwise treat it as a normal call.
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Communicating in the office 8 1
Preventing Voice Calls to your telephone using Voice Call Deny
Press ƒ°°. Voice calls ring like regular internal calls. Your other calls
proceed normally.
Canceling Voice Call Deny
Press ƒ£°°.
Displays.
Dial the internal number or press the internal autodial button of the
person to whom you want to speak.
Dial voice call
Microphone muted
No voice call
Your handsfree microphone is muted. Press © or pickup your
receiver to respond to the voice call.
The telephone receiving the call cannot accept voice calls for one of the
following reasons: it is active or ringing with another call; Call Forward is
turned on; Do Not Disturb is turned on; Voice Call Deny is turned on; it is
not an Enterprise Edge telephone. Your call proceeds automatically as a
regular ringing call.
The line is open for you to speak.
Voice call
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
8 2 Communicating in the office
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Tracking your incoming calls
10
Using Call Log
Telephones can automatically log Call Display information for calls on an external
line. The line must appear on that telephone but it does not have to be a ringing line.
If your system is equipped with the appropriate equipment and you have subscribed
to the call information feature supplied by your service provider, you are able to
capture information about incoming callers in your call log. The same feature is
supplied by an ISDN service package that comes with calling line identification
(CLID).
Call Log creates a record of incoming external calls. For each call the log can
contain:
•
•
•
•
•
•
•
sequence number in the Call Log
name and number of the caller
indication if the call was long distance
indication if the call was answered (and identity of who answered it)
time and date of the call
number of repeated calls from the same source
name of the line on which the call came
Call Log can help you to
•
•
keep track of abandoned or unanswered calls
track patterns for your callers (for example volume of calls and geographical
location of calls)
•
•
record caller information quickly and accurately
build a personal telephone directory from log items
The long distance indicator and the caller’s name and number, may not be shown in
the log, depending on the Call Display services provided by your local telephone
company and the caller’s local telephone company.
To use the features on the following pages, your telephone must have spaces
available in its Call log. Your installer programs each telephone with an appropriate
number of spaces.
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
8 4 Tracking your incoming calls
Call Log options
ƒ•°›
You can select the type of calls to be stored in your Call Log. Choose from four
Autolog options: No one answered, Unanswerd by me, Log all calls, No autologging.
1. Press ƒ•°›. The display shows the current option.
2. Press £ or NEXT to change the option.
3. Press ˙ or OK to select the display option.
Logging a call manually
ƒ°⁄‹
If your calls are not automatically logged, you can manually log call information
when you are connected to an external call. Storing information for your current call
can be helpful in many situations. For example, you may want to
•
•
record a caller’s information without using paper and pencil
record only selected calls that you choose, as opposed to using Call Log
automatically
•
quickly record caller information before a caller hangs up
Press ƒ°⁄‹ to log an external call manually.
Deleting old log items
ƒ°⁄fi
Your log has a set number of items that it can hold. When it becomes full, new calls
cannot be logged. When your log is full, Autobumping automatically deletes the
oldest Call Log item when a new call is logged.
Press ƒ°⁄fi to enable autobumping.
Press ƒ£°⁄fi to disable autobumping.
Viewing your Call Log
ƒ°⁄¤
To view your log:
1. Press ƒ°⁄¤. The display shows the number or previously read
items (old) and the number of new, unread items (new) in the log.
2. Press • or OLD to view old items; press £ or NEW to view new items.
3. Press ‚ or RESUME to display the last item you viewed, the last time you
viewed your Call Log.
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Tracking your incoming calls 8 5
Names and numbers for external callers are displayed only if you have subscribed
to Call Display services from your local telephone company.
Viewing a Call Log item
Press √ or MORE to view the information for a call log item.
Erasing log items
You should routinely erase log items that you’ve read, to make space for new items
in your log.
1. Display the item you want to erase.
2. Press ˙ or ERASE.
3. Press ® to exit.
If you accidentally erase an item, you can retrieve it.
1. Press ˙ or UNDO immediately after accidentally erasing an item.
2. Press ® to exit.
Making a call using Call Log
You may find it helpful to place calls from within your Call Log. The number stored
for each call may vary depending on the type of call. For example, if the call was
placed from a Centrex or PBX system, the first few numbers may need to be
trimmed before you can make the call. If the number you want to call is long
distance, or if you want to use a line pool, you may need to add numbers.
To place a call:
1. Display the log item for the call you want to place.
2. Display the associated telephone number.
3. Press √ or TRIM, once for every digit that you want to remove.
4. Dial any extra digits required.
5. Press an external line or line pool button.
6. Lift the receiver. (This is not necessary if Handsfree is programmed at your
telephone.) The displayed number is dialed.
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
8 6 Tracking your incoming calls
Creating a password to your Call Log
ƒ•°fi
To access your Call Log through a password:
1. Press ƒ•°fi. The displays reads New passwrd:.
2. Enter your four-digit password. The display reads Repeat New:.
3. Re-enter your four-digit password. The display reads Password changed, which
confirms that your password has been assigned.
To enter Call Log using your password:
1. Press ƒ°⁄¤ to enter Call Log. If you have programmed a
password, the display reads Password:.
2. Enter your four-digit password.
If you forget your Call Log password, it can be deleted in programming. See
Changing your Call Log password
ƒ•°fi
1. Press ƒ•°fi. The display reads Old passwrd:.
2. Enter your old password. The display reads New passwrd:.
3. Enter your new four-digit password. The display reads Repeat New:.
4. Re-enter your password. The display reads Password changed, which confirms
that your password has been changed.
Deleting an assigned password
ƒ•°fi
1. Press ƒ•°fi. The display reads Old passwrd:.
2. Enter your old password. The display reads New passwrd:.
3. Press ˙ or OK. The display reads No pswd assigned, which confirms that
your password has been deleted.
Programming a telephone to log calls automatically
Your installer can program each telephone to automatically log calls coming in on
a line.
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Tracking your incoming calls 8 7
Displays
The caller's name is unavailable.
The caller’s number is unavailable.
_ indicates a new item.
1:Unknown name
1:Unknown number
12:KATE SMITH
NEXT
ERASE
MORE
MORE
MORE
¯ indicates that the call was answered.
§ indicates a long distance call.
12¯KATE SMITH
NEXT ERASE
12§KATE SMITH
NEXT ERASE
/ indicates that the stored number has been shortened
to its final 11 digits. Press √ or MORE to
display additional information about the call.
49/1234567890123
NEXT ERASE MORE
One or more log entries have been deleted by the
Autobumping feature while you are looking at the Call
Log.
Call(s) bumped
Hold or release
In use: SETNAME
Jan 4 9:00a
Hold or release your active call before entering Call
Log.
The external line is in use.
The repeat call counter, shown along with time and
date, indicates the number of calls you have received
from the same caller.
3X
MORE
NEXT
ERASE
ERASE
ERASE
ERASE
This call was answered at another telephone (227).
Line061
NEXT
¯227
MORE
This call was logged manually.
Line061
NEXT
¯Logit
MORE
This call was not answered.
Line061
NEXT
MORE
There are one or more items in your message waiting
list, and there are one or more new items in your Call
Log. Press ƒ°‚fl to change the first
line of the display to the current time and date.
Messages & Calls
MSG CALLS
You have viewed your last old log item and now view
your new log items.
New calls begin
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
8 8 Tracking your incoming calls
No information is available for the call.
No info to log
No log space has been assigned to the telephone.
No log assigned
No resume item
The resume item has been removed because of
Autobumping, repeat call update, or log reallocation
while you are looking at the Call Log.
Using voice mail
If you subscribe to Enterprise Edge Voice Messaging, you can access that service
through your Enterprise Edge system. Note that a software keycode is required for
Enterprise Edge Voice Messaging. Your installer programs your Enterprise Edge
telephone to indicate when you have a voice message waiting on a particular line.
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing your telephone
11
Finding out what a button does using Button Inquiry
ƒ•‚
You can check the function of any line, intercom, or programmed button on your
Enterprise Edge telephone by pressing ƒ•‚. On the M7100 telephone
Button Inquiry shows your internal number followed by the function assigned to
your single memory button.
Displays
The display shows the number and name of the line.
Press SHOW to view the redirection status of the line.
061 <LINENAME>
SHOW
OK
Press £ or press VIEW‚ or ·VIEW to view a number
that is too long to fit on the display. Press ˙
or OK when you are done.
123456789012345...
VIEW‚
OK
The display shows the directory number of the
telephone, and the assigned name. Press NEXT to see
the first line assigned to ring at the intercom button.
221 <SETNAME>
NEXT VIEW‚
The name of the feature assigned to a button is
displayed when you press the button. Press £ or
SHOW for additional information.
<Feature name>
SHOW
OK
Press the button you want to check. Press ƒ
or EXIT when you are finished.
Press a button
EXIT
Making the display darker or lighter using Contrast adjustment
ƒ•‡
1. Press ƒ•‡.
2. Press a number on the dial pad to choose the contrast level you prefer.
3. Press ˙ to save your setting.
On a two-line telephone, you can use the UP and DOWN display buttons to adjust the
contrast. The number of contrast levels available varies from one telephone model
to another.
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
9 0 Customizing your telephone
Changing the language on the display
You can select the language used on the display of each Enterprise Edge telephone.
Enterprise Edge software supports three languages: English, French and Spanish.
Button caps are available for each language. When your system is first installed, all
telephones use English.
If you program ƒ•fi‚⁄ on to a memory button, you can press that
button until the language you want appears on the display. You cannot program
ƒ•fi‚¤ or ƒ•fi‚‹ onto a memory button.
English
Press ƒ•fi‚⁄.
French
Press ƒ•fi‚¤.
Spanish
Press ƒ•fi‚‹.
Programming a feature code onto a memory button
You can program a feature code onto a memory button. In some cases, pressing the
button a second time cancels the feature.
Programming feature buttons
ƒ•‹
Any memory button not programmed as an external or internal line, target line,
Answer button, or Handsfree/Mute button, is available for features.
1. Press ƒ•‹.
2. Press the memory button you want to program with a feature.
3. Enter the appropriate feature code you want to assign onto the button.
The following feature codes cannot be programmed onto a memory button: Long
Tones and any code beginning with • except ƒ•fi‚⁄ (Language
Choice) and ƒ•‡ (Contrast Adjustment).
Tip
When you program a button with the line pool feature code, you must enter a
line pool access code after the feature code. The programmed line pool button
accesses a specific line pool, not the line pool feature.
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing your telephone 9 1
Erasing a feature button
1. Press ƒ•⁄.
2. Press the feature button.
3. Press ˙ or OK to erase the button.
Displays
The name of the feature assigned to a button is
<Feature name>
SHOW
displayed when you press the button. SHOW appears
OK
when there is more information available. Press £ or
SHOW for additional information.
If you are checking a speed dial button, enter the
two-digit speed dial code that you want to check.
Enter code:
Enter the feature code, or press ® or QUIT to quit
programming or CLEAR to clear the numbers you have
entered. The system accepts the entry as soon as you
enter a valid feature code.
F__
QUIT
CLEAR
Press ƒ and enter the feature code you want
to assign to the button. You cannot enter invalid codes.
Feature code:
QUIT
You have programmed a button with a feature that was
already programmed onto another button. The feature
has moved to the button you just programmed. Its
original button is now blank.
Feature moved
Press the button you want to check. Press ƒ
or EXIT when you are finished.
Press a button
EXIT
Enter the number you want to program and press
˙. To erase the button, just press
˙.
Program and HOLD
Enter the number you want to program and press OK.
To erase the button, just press ˙ or OK.
Program and OK
QUIT
OK
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
9 2 Customizing your telephone
Applying button cap labels
Before you apply button labels, activate the Button Inquiry feature (ƒ•‚)
to verify the button functions, and to avoid activating features as you put the labels
Tip
Keep the extra labels and button caps with each Enterprise Edge telephone.
Types of button caps
•
Unlabeled, clear button caps
with appropriate green or grey paper for typing in line numbers, telephone
numbers, and features
•
Pre-printed, colored button caps
in green or grey
Some examples of pre-printed button caps
Green caps
¬
©
Grey caps
µ
ß
Tip
To make identification of line types easier, use preprinted green button caps
for lines that support incoming and outgoing calls. Use clear button caps for
target lines that are incoming only.
Identifying the telephones
1. Write the individual telephone numbers on the labels and attach them to the
appropriate Enterprise Edge telephones.
2. Write the telephone number and the internal number on the appropriate
receiver card for each type and color of telephone that is to be installed.
3. Cover the receiver card underneath the receiver of each telephone with the
plastic lens.
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing your telephone 9 3
Enterprise Edge default button assignments
During Startup, the Enterprise Edge installer chooses one of the available templates.
Default features are assigned automatically to the programmable buttons on
Enterprise Edge telephones, and vary with the template and the telephone. The
default features are listed in the following tables in this chapter.
Tips
Enterprise Edge telephones are shipped from the factory with the button caps
in place for the PBX template.
Please consult your customer service representative to determine the type of
template programmed into your system before applying button assignments.
Rules of default button assignment
Line and Intercom buttons are assigned by default templates and can be changed in
programming. Handsfree/Mute and answer buttons are not assigned by default. If
these features are defined, however, they are automatically assigned to specific
buttons, as described on this and the following page. None of these buttons can be
assigned to M7100 telephones.
The Handsfree/Mute feature appears on the bottom right-hand button, moving the
Intercom button(s) up one position.
Each telephone can have up to eight Intercom buttons. They appear above the
Handsfree/Mute button at the bottom right-hand position on your telephone.
Each telephone can have up to four answer buttons. They appear above Intercom
buttons in the right column and continue up from the bottom in the left column,
replacing the features on those buttons.
External line buttons appear in ascending line order, starting at the top button in the
left column (the top button on the M7208 telephone). If more than five external
lines are assigned to a M7310 telephone, or more than 12 to a M7324 telephone,
assignment continues down the buttons on the right column, erasing the features on
those buttons. Line buttons have priority over feature access buttons but not
Handsfree/Mute, Intercom, or answer buttons.
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
9 4 Customizing your telephone
M7310 telephone button defaults
The default button assignments for the M7310 telephone depend on the template
applied. The exception is the default numbering for the dual memory buttons. Refer
Dual memory buttons
∫Set 233
…
∫Set 227
∫Set 221
∫Set 234
∫Set 222
…
∫Set 228
∫Set 235
∫Set 223
…
∫Set 229
∫Set 236
∫Set 224
…
∫Set 230
This example shows defaults for a system with three-digit internal numbers. The
defaults do not actually exist on any telephone, as no telephone has an autodial
button for itself. The position that would be taken by the autodial button for itself,
is blank.
M7310 template button assignments
PBX
DID
∂
†
∞
œ
π
ç
µ
≈
∆
∆
¬
†
∞
œ
π
ç
µ
≈
∆
∆
M7208 template button assignments
PBX
DID
œ
†
µ
π
ç
ß
∆
∆
¬
†
µ
π
ç
ß
∆
∆
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing your telephone 9 5
M7324 telephone button defaults
The default button assignments for the M7324 telephone depend on the template
PBX
DID
∫
∫
∫
∫
∫
∫
∫
∫
∞
ç
†
∂
œ
≈
π
∆
∆
∫
∫
∫
∫
∫
∫
∫
∫
∞
ß
µ
∫Saved No.
†
¬
∫
ç
†
∂
œ
≈
π
∆
∆
ß
µ
∫Saved No.
∫
∫
∫
∫
∫
M7100 telephone button defaults
For all templates, the one programmable button on the M7100 telephone is
µ.
Tip
The default Page button activates the External Page option
(ƒfl¤).
Moving line buttons
ƒ•°⁄
You can move external lines to different buttons on your telephone to arrange your
lines in the way that makes the most sense to you.
You cannot move intercom, answer or Handsfree/Mute buttons onto a CAP module.
1. Press ƒ•°⁄.
2. Press the line button you want to move.
3. Press the button to which you want to move the line.
4. Press ®.
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
9 6 Customizing your telephone
Displays
The two buttons you selected have exchanged
position.
Exchanged
You have tried to move a line to a button that cannot
be used as a line button, such as an intercom button,
Handsfree/Mute button, or an answer button.
Invalid location
Press the button of the line you want to move. Press
ƒ or QUIT when you have finished moving
lines.
Move line from:
QUIT
Press the button you want to move the line to. Neither
of the buttons is erased. The lines, or the line and
feature, simply switch places.
Move line to:
QUIT
The button you are trying to move is not a line button.
If you are trying to switch a line and a feature, move the
line to the feature button and not the feature button to
the line.
Press a line
Changing the type of ring
ĥfl
You can choose one of four distinctive rings for your telephone. This makes it easier
to identify your telephone in an open office.
1. Press ĥfl.
2. Press ⁄, ¤, ‹, ›, or NEXT. You hear the selected ring for two seconds.
3. Repeat until you hear the ring you prefer, then press ˙ or OK.
Adjusting the Ring volume
ƒ•°‚
1. Press ƒ•°‚. The telephone rings.
2. Press √ to adjust the volume; left end for lower and right end for
higher.
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing your telephone 9 7
Hiding the message or calls indication
ƒ°‚fl
The display that shows you have messages or calls can be replaced with the current
time and date. You can retrieve your message and call information by using the
display buttons that appear on the second line of the display.
If you are using a telephone with a single-line display, the message or call indication
is hidden.
1. Press ƒ°‚fl. The current time and date appears on the top line of
the display.
2. Press MSG or ƒflfi to see your messages, or press CALLS or
ƒ°⁄¤ to see your calls.
Restoring the messages and calls indication
Press ƒ£°‚fl.
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
9 8 Customizing your telephone
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
User preferences
12
The User preferences section of programming allows you to program memory
buttons, speed dial codes and other settings for any Enterprise Edge telephone on
the system.
For example, an employee may want to have the Do Not Disturb feature
programmed onto a memory button or create a speed dial code. Instead of
programming from the employee’s telephone, you can also program memory
buttons from the Unified Manager.
Using User preferences
User preferences programming is available under the heading User preferences in
Terminals & Sets in the Unified Manager.
Sub-headings in User preferences
User preferences
Model
Button programming
User speed dial
Call log options
Dialing options
Language
Display contrast
Ring type
1. Select Terminals & Sets.
2. Select a DN number.
3. Select User preferences.
Changing button programming
Select Button programming. The display shows the button layout for the selected
telephone (an example is shown in Displays at the end of this section).
If the telephone has a CAP module, you can select CAP1 to see the buttons on the
module.
User preferences programming cannot change the buttons that are used by lines,
intercom, and the handsfree feature.
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
1 0 0 User preferences
Changing User Speed Dial
1. Select User Speed Dial. The display shows the speed dial codes that are
currently programmed.
2. Enter a new speed dial and press Return.
Use the line pool code to select a particular line pool for use with Speed Dial. If you
select Use routing tbl, a line or pool is chosen by the routing programming
according to the initial digits in the number.
The route you choose for a User Speed Dial code must be one that the telephone can
use. For example, if the telephone does not have access to Line Pool B and you use
that pool code with the speed dial code, the code does not work.
To change a system speed dial code, see Changing and adding System Speed Dials
Changing Call Log options
1. Select Call log opt’ns.
Changing how calls are dialed
1. Select Dialing options.
2. Select the option you want to use.
Descriptions for dialing options are found on the Telephone Feature Card, or see
Changing the language used on the display
Select Language. Choose the language setting: English, French, or Spanish. See
Making the display lighter or darker
Select Display contrast and choose the value you want to use.
Changing the telephone’s ring
Select Ring type and choose the option you want to use.
Descriptions for ringing options are found on the Telephone Feature Card or in
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming Hunt Groups
13
The Hunt Groups feature allows a group of Enterprise Edge sets to be called by a
single directory number ensuring that calls are easily routed to the appropriate
group. For more information about software packaging, see the Enterprise Edge
Programming Operations Guide.
Hunt Groups are used in situations where a group of people performing the same
task are required to answer a number of related phone queries. Some typical uses of
Hunt Groups are:
•
•
•
a sales department answering questions on product prices or availability
a support department answering questions concerning the operation of a product
an emergency department answering calls for help.
Hunt Groups can be used to route calls to a support service such as a Help Line for
a software company. Specialists dealing with Product A can be in one group, and
specialists dealing with Product B can be in another group. Incoming calls hunt for
the next available set in the group. If no set is available, the call can be placed in a
queue or routed to an overflow set.
The Hunt Groups subheading in Resources, Telephony is the area where
programming changes are made to the following:
•
•
•
•
•
•
members of a group
member position in a group
what lines are assigned to a group
how incoming calls are distributed
how long the system looks for available members
where a call goes if all members are busy
Note: Videophones should not be programmed as members of a Hunt Group. Hunt
Groups allow one B channel connection at a time and videophones use two
B channels.
Features affected by Hunt Groups include:
•
•
•
•
•
•
•
Call Forward All Calls
Call Forward No Answer
Call Forward on Busy
Group Pickup
Transfer via Hold
Priority Call
Line Redirection
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
1 0 2 Programming Hunt Groups
•
•
Page Zones
Voice Call
Adding or removing members from a group
Members of the group can be any Enterprise Edge set, or portable. An Enterprise
Edge set can be in more than one Hunt Group but is considered a member in each
Hunt Group, increasing the total number of members in the system.
There can be only one appearance of the same Hunt Group on a set. Hunt Group
DNs cannot be members of other Hunt Groups. A DN can be associated with a
member of a Hunt Group and is called a member DN.
Consult your customer service representative to determine your Hunt Group
number range.
1. Select Resources, Telephony, Hunt Groups.
2. Select a hunt group from the hunt group list (1-30).
3. From the hunt group, select Members.
4. To add a member, click Add. Enter a DN number and click Save.
5. To remove a member, select the member and click Delete.
Moving members of a group
Member order within a Hunt Group is important. The member order determines
how a call is routed through a Hunt Group.
1. Select Telephony, Hunt Groups.
2. Select a hunt group from the hunt group list (1-30).
3. From the hunt group, select Members.
4. Double-click a member from the member list.
5. Enter the new member number (001, 002, etc.) and click OK.
The list is automatically reordered.
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming Hunt Groups 1 0 3
Assigning or unassigning lines to a group
Configure the prime set for a Hunt Group’s line to None to avoid delayed ring
transfer of external Hunt Group calls to the prime set before the Hunt Group can
receive the call. For more information about programming line settings, see the
chapter “System Operations” in the Enterprise Edge Programming Operations
Guide.
A line can be assigned to only one group.
1. Select Telephony, Hunt Groups.
2. Select a hunt group from the hunt group list (1-30).
3. Select Line Assignment.
4. To assign a line, click Add. Enter a line number and click Save.
5. To unassign a line, select the line and click Delete.
Setting the distribution mode
There are three modes of call distribution:
•
•
Broadcast—rings each set in the group simultaneously. Calls are handled one at
a time; other calls are queued. As soon as a call is picked up, the call next in the
queue is presented to the Hunt Group without having to wait for queue time-out.
In Broadcast mode, a single incoming call rings simultaneously at all the sets in
a group. This way, all receptionists in the group can share the load of answering
large volumes of calls. All sets automatically display the calling line
identification (CLID), if available. A familiar example is a fund-raising
campaign where a group of operators are waiting to take each call as it comes in.
•
Linear—starts the call at the first set in the Hunt Group and distribution is
complete when the first free set has been found. Simultaneous calls can be
presented. Distribution is order based.
•
•
In Linear mode, you can program your top salesperson to be the first member
of the group to receive incoming calls.
Rotary—the call starts at the set after the one which answered the last call.
Distribution is complete when the next free set has been found. Simultaneous
calls can be presented. Distribution is order based.
•
In Rotary mode, you can ensure that all your helpline people are receiving calls
on an equal basis, rather than one person receiving the majority of calls. The call
rings at one set at a time in a round robin fashion.
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
1 0 4 Programming Hunt Groups
If a Hunt Group has available members but nobody answers the call, the call is
routed through the Hunt Group list until either someone answers the call or the
queue time-out occurs. In the latter case, the call is routed to the overflow position.
Once a call goes to the overflow position it is no longer a Hunt Group call.
1. Select Telephony, Hunt Groups.
2. Double-click a hunt group from the hunt group list (1-30).
3. Select a Mode setting: Linear, Rotary, Broadcast.
Setting the hunt delay
This setting allows you to program the number of rings the system permits at a Hunt
Group set before moving on to the next set in the Hunt Group.
1. Select Telephony, Hunt Groups.
2. Select a hunt group from the hunt group list (1-30).
3. Select a Hunt Delay setting: 1, 2, 3, 4, 5, 6, 7, 8, 9, or 10.
Programming busy line setting
A Hunt Group is considered busy if one of two scenarios exists:
•
•
all of its members are being presented an incoming Hunt Group call
all of its members are active on a Hunt Group call
There are three routing options if all members are busy:
•
•
BusyTone—the caller gets a busy tone (PRI lines only)
Overflow—the call is routed to an overflow position. If the overflow DN is the
hunt group DN for that same hunt group, the overflow option will not appear.
•
Queue—the call stays in the system for a period of time. Within this period of
time, the call is presented to a member if one becomes available. When the time-
out occurs, the call is presented to an overflow position.
1. Select Telephony, Hunt Groups.
2. Double-click a hunt group from the hunt group list (1-30).
3. Choose an If busy setting: Busy Tone, Overflow, or Queue.
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming Hunt Groups 1 0 5
Programming the queue time-out
This setting allows you to program the number of seconds a call remains in the Hunt
Group queue before it is routed to the overflow position.
1. Select Telephony, Hunt Groups.
2. Double-click a hunt group from the hunt group list (1-30).
3. Select a Queue timeout setting: 15, 30, 45, 60, 120, or 180.
Programming the overflow set
This setting allows you to program the overflow set to which the Hunt Group calls
are to be routed. Unless the overflow position is a Hunt Group set, the call ceases
to be a Hunt Group call. If the overflow set is a Hunt Group set, the call is treated
as a new call and goes to the bottom of the queue.
The overflow set can be a set DN number associated with a voice mailbox.
1. Select Telephony, Hunt Groups.
2. Double-click a hunt group from the hunt group list (1-30).
3. Enter the DN number in the Overflow text box.
Setting the name
This setting allows you to program the Hunt Group name, such as SERVICE or
SALES. The name can be up to seven characters in length.
1. Select Telephony, Hunt Groups.
2. Double-click a hunt group from the hunt group list (1-30).
3. Type in a new name and press Return.
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
1 0 6 Programming Hunt Groups
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Telephone features
14
Installing Enterprise Edge telephones
If you are connecting an Enterprise Edge telephone for the first time, refer to the
following illustrations as a guide.
Installing an Enterprise Edge telephone
Connect to
jack wired from
distribution block
Connect to
receiver
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
1 0 8 Telephone features
Mounting an Enterprise Edge telephone on the wall
1
2
3
4
5
6
Naming a telephone or a line
You can assign names to identify external lines, target lines, and your co-workers’
telephones. During a call, the name (if programmed) is shown on the telephone
display instead of the external line number or internal telephone number of the
caller. Step-by-step instructions for adding or changing the name of a telephone or
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Telephone features 1 0 9
Telephone names and line names can contain both letters and numbers, but cannot
be longer than seven characters. You cannot use the # and * symbols.
Tip
You can give the same name to two or more telephones, or to a telephone and
a line in your system. To avoid confusion, avoid such duplication. Use
initials, abbreviations, or even nicknames to give each telephone a unique
name.
If automatic telephone relocation is turned on, the name and internal number
of a telephone are saved if the telephone is moved within your system.
Moving telephones
You may be required by law to report any telephone moves to your local
telecommunications carrier or 911 service provider. For further details,
consult your local carrier, your local 911 service provider, and/or your local
telecommunications service provider.
If automatic telephone relocation is enabled in programming by your installer, you
can move your telephone from one Enterprise Edge jack to another without losing
any of its custom programming.
Stopping calls from ringing at your telephone using Do Not Disturb
(DND)
ƒ°fi
Stopping calls
Press ƒ°fi to stop calls from ringing at your telephone.
Only priority calls ring at your telephone. A line button flashes when you receive a
call, but the call does not ring.
Refusing to answer a call
While you are on a call, you can refuse to answer a second call (including a priority
call).
Press ƒ°fi while your telephone is ringing.
Canceling Do Not Disturb
ƒ£°fi
Press ƒ£°fi.
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
1 1 0 Telephone features
Displays
Your telephone receives calls normally.
Allow calls
Using Do Not Disturb
Once you turn Do Not Disturb on, calls are forwarded to the prime telephone only
if there is no other telephone on which the line appears. If there is another telephone
that shares the same line, the call may be answered by that person. (The Delayed
Ring Transfer feature transfers all unanswered calls to the prime telephone after a
specified time.)
Do Not Disturb prevents voice calls from alerting at your telephone. Voice calls are
presented as normal intercom calls.
Tip
Enterprise Edge sets that are members of a Hunt Group can temporarily leave
a Hunt Group by activating this feature. Hunt Group calls arriving while a set
is in Do Not Disturb mode are routed to the next member in the Hunt Group.
Using Background Music
ƒ°fl
Listen to music through your telephone speaker by pressing ƒ°fl.
Your installer makes this feature available to all telephones in programming. You
need to supply a music source, such as a radio, and have it attached to your
Enterprise Edge system.
In accordance with U.S. copyright law, a license may be required from the
American Society of Composers, Authors and Publishers or a similar
organization if radio or TV broadcasts are transmitted through the
Background Music feature of this telecommunication system.
Northern Telecom Inc. hereby disclaims any liability arising out of the
failure to obtain such a license.
Turning Background Music off
The music stops automatically if you make or answer a call or if you press
ƒ£°fl.
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
ISDN PRI
15
Integrated Services Digital Network (ISDN) technology provides a fast, accurate
and reliable means of sending and receiving data, image text and voice information
through the telephone system.
Using ISDN Primary Rate Interface (PRI) allows for faster transmission speeds and
the addition of a variety of powerful business applications, including remote LAN
access, videoconferencing, file transfer, and Internet access.
Your installer configures your ISDN services and terminal equipment.
Benefits
PRI is economical because separate analog trunks and data circuits are not needed
for Direct Inward Dialing (DID), Direct Outward Dialing (DOD) and data transfer.
With PRI there is greater flexibility because B channels can be dynamically
reconfigured to accommodate changes in traffic with the Call by Call feature. For
PRI offers fast information access because channel usage is optimized to allow you
the full benefit of available bandwidth and real-time connectivity.
PRI lines are configured as DID lines. Incoming calls on a PRI line can appear on
a DID button or on an intercom button depending on how your Enterprise Edge set
has been configured. Outgoing calls are made from the intercom buttons.
PRI lines can be accessed from all devices such as Enterprise Edge sets and wireless
sets.
ISDN PRI features
Selected ISDN network features can be used from an Enterprise Edge telephone.
Your central office switch (ISDN network) determines which features are available
to you.
Network Name Display for PRI
Your Enterprise Edge system displays the name of an incoming call when it is
available from the service provider. Name information can be displayed on an
Enterprise Edge set. If the Calling Party Name has the status of “private” it may be
displayed as “Private name”. If the Calling Party Name is unavailable it may be
displayed as “Unknown name”.
Your Enterprise Edge system displays the name of the called party on an outgoing
call, when it is provided by your service provider.
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
1 1 2 ISDN PRI
Your Enterprise Edge system sends the Business Name concatenated with the set
name on an outgoing call but only after the Business Name has been programmed.
The available features include:
•
•
•
•
•
Receiving Connected Name
Receiving Calling Name
Receiving Redirected Name
Sending Connected Name
Sending Calling Party Name
Consult your customer service representative to determine which of these features
is compatible with your service provider.
Name and number blocking for PRI
When activated, ƒ°⁄· allows you to block the outgoing name
and/or number on a per-call basis. Name and number blocking can be used with an
Enterprise Edge set.
Consult your customer service representative to determine whether or not this
feature is compatible with your provider.
Emergency 911 Dialing
Enterprise Edge with the ISDN PRI feature is capable of transmitting the telephone
number and internal extension number of a calling station dialing 911 to the Public
Switched Telephone Network. State and local requirements for support of
Emergency 911 Dialing service by Customer Premises Equipment vary. Consult
your local telecommunications service provider regarding compliance with
applicable laws and regulations.
If transmission of internal extension numbers is not required or desired, then it is
recommended that you maintain a site map or location directory that allows
emergency personnel to rapidly locate an Enterprise Edge set given its DID number.
This list should be kept up to date and readily available, and can be included in the
Programming Record.
2-way DID
With PRI the same lines can be used for receiving direct inward dialing (DID) and
for making direct outward dialing (DOD) calls.
The dialing plan configured by your customer service representative determines
how calls are routed.
Consult your customer service representative to determine whether or not this
feature is compatible with your service provider.
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
ISDN PRI 1 1 3
Call by Call service selection for PRI
PRI lines can be dynamically allocated to different service types with the Call by
Call feature. PRI lines do not have to be pre-allocated to a given service type.
Call types that may be available, depending on your service provider are:
Public
Public calls connect your Enterprise Edge set with a Central Office (CO). DID and
DOD calls are supported.
Private
Private calls connect your Enterprise Edge set with a Virtual Private Network. DID
and DOD calls are supported. A private dialing plan may be used.
Tie
Tie lines are private incoming and outgoing lines that connect Private Branch
Exchanges (PBX) such as Enterprise Edge.
FX (Foreign Exchange)
FX calls connect your Enterprise Edge set to a remote CO. It provides the
equivalent of local service at the distant exchange.
Outwats
Outwats is for outgoing calls. This allows you to originate calls to telephones in a
specific geographical area called a zone or band. Typically a flat monthly fee is
charged for this service.
Inwats
Inwats is a type of long distance service which allows you to receive calls
originating within specified areas without a charge to the caller. A toll-free number
is assigned to allow for reversed billing.
Consult your customer service representative to determine whether or not this
feature is compatible with your provider.
Dialing Plan and PRI
The Dialing Plan supports PRI connectivity to public and private networks. The
dialing plan is a collection of features responsible for processing and routing
incoming and outgoing calls. All PRI calls must go through a dialing plan.
The Dialing Plan
•
•
•
allows incoming calls to be routed to sets based on service type and digits
received
allows Enbloc dialing by buffering user-dialed digits until a complete DN has
been dialed
provides the ability to map user-dialed digits to a service type on a Call by Call
basis
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
1 1 4 ISDN PRI
•
allows long distance carrier selection via user-dialed Carrier Access Codes
Consult your customer service representative to determine how your dialing plan is
configured.
Service provider features
Consult your customer service representative to determine if the new ISDN features
are supported with your service provider.
Call Forward
Call Forward allows you to forward your calls to an external telephone number.
1. Select an ISDN line by selecting a line button, a line pool, or the Handsfree
button, or by lifting the handset (if an ISDN line is your prime line).
2. Consult your service provider for the appropriate feature code to enter on your
dial pad. Listen for three tones followed by dial tone.
3. Enter the internal number of the telephone to which you want your calls
forwarded. If the call is answered, stay on the line for at least five seconds to
activate the Call Forward feature.
Canceling Call Forward
1. Select an ISDN line by selecting a line button, a line pool, or the Handsfree
button, or by lifting the handset (if an ISDN line is your prime line).
2. Consult your service provider for the appropriate feature code to enter on your
dial pad. Listen for a series of tones.
3. Press ®.
Calling the number your calls are forwarded to
1. Select an ISDN line by selecting a line button, a line pool, or the Handsfree
button, or by lifting the handset (if an ISDN line is your prime line).
2. Consult your service provider for the appropriate feature code to enter on your
dial pad.
Automatic Call Back
If you call a number and it is busy, enter the appropriate feature code designated by
your service provider to receive a distinctive ring at your set when the line becomes
available for calls.
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
ISDN PRI 1 1 5
Automatic Recall
Automatic Recall allows you to automatically dial the number of the last call you
received. You may not see the number on the display if the information is not
available from your service provider, or you do not have Caller ID as part of your
ISDN service.
Consult your service provider for the appropriate feature code to enter on your dial
pad.
ISDN applications for PRI
ISDN terminal equipment delivers a wide range of powerful business applications:
Videoconferencing and video telephony
Video conferencing offers instant visual and audio contact between distant parties
using studio-based terminals.
Desktop conferencing
ISDN allows computer users in distant locations to share and edit any image, data
or text file on their own computer screens while they discuss the information.
File transfer
The ISDN network allows you to transfer files containing data, text, images, data,
or audio clips, faster and cheaper than with a conventional modem.
Telecommuting
Convenient retrieval, processing and storage of files is possible for the employee
working at home by using ISDN lines to give high-speed access to information
resources at the office.
Group 4 fax
ISDN fax applications save money by increasing both transmission speed and the
quality of resolution.
Remote LAN access
ISDN provides an affordable and fast means for employees at remote sites (at home
or branch offices) to access local area networks (LANs).
Leased line backup
Essential backup for leased lines can be provided using ISDN as required, rather
than duplicating costly permanent leased lines.
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
1 1 6 ISDN PRI
LAN to LAN bridging
Local area network (LAN) bridge/routers allow flexible interconnection between
LANs using ISDN, with charges incurred only when information is actually
transmitted.
Internet and database access
The fast call set up and high bandwidth of ISDN are ideal for accessing information
services such as the Internet and databases.
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Using System features
16
Using alternate or scheduled services
There are three types of Services to make your Enterprise Edge system handle calls
differently on different days and at different times of the day: Ringing service,
Restriction service and Routing service.
Each of the three services, and the six schedules available to each service, are
customized for you by your installer. They program which telephone is used to turn
Services on and off, and display what Services are in use. This is called the control
telephone.
Preventing certain calls from being made
Restriction service prevents a user from making certain kinds of calls from a
telephone or from lines that are available at the telephone. The restrictions are
programmed by your installer.
Making additional telephones ring
Ringing service makes additional telephones ring for incoming calls on external
lines. For instance, all incoming external calls can ring at a security guard’s
telephone during the night, or calls to one attendant can ring at another attendant’s
telephone during lunch. It does not suppress your normal ringing assignment.
Changing the lines used by outgoing calls
Routing service allows you to assign alternate routes to calls. In this way you can
take advantage of lower costs available on particular routes on certain days and at
certain times. Both the regular and alternate routes are programmed by your
installer.
Turning Services on and off
The master control for how different services and their schedules are used by your
system is in programming. There are three settings: Manual, Automatic and Off.
•
Manual allows you to turn the service on and off at any time from a control
telephone using a feature code.
•
Automatic allows you to use the preassigned stop and start time for a service.
You are able to start and stop the service by entering the appropriate feature
code at a control telephone. If you select this setting, you use the start and stop
times programmed by your installer.
•
Off prevents the service from being activated.
You need to start a Unified Manager session to program this feature. See Getting
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
1 1 8 Using System features
1. Select Services.
2. Select the service you want to program: Ringing, Restriction, or Routing.
3. Double-click a Schedules option: Night, Evening, Lunch, Sched 4, Sched 5,
or Sched 6.
4. Choose a Service setting: Off, Manual, or Automatic.
Note: For Ringing and Routing services you will need to expand the Schedules
directory to display the service options.
Each schedule can have its own configuration of a Service which works
independently of automatic start and stop times. For example, there may be a
version of Restriction service called Night Schedule that prevents anyone from
making long distance calls. But calling it Night Schedule does not mean it can only
be used with a schedule. You can turn the Night Schedule for Restriction Service
on or off as needed any time of the day or night. If you decide to run a service on a
schedule, the system uses the start and stop times used for that schedule.
An example of how to turn on a Service manually
You may have Ringing service (your night service) set up to run according to the
Night Schedule. You may decide you want that ringing arrangement to come into
effect only when it is turned on and off manually.
You need to start a Unified Manager session to program this feature. See Getting
1. Choose Services, Ringing Service, Schedules.
2. Double-click Night.
3. Change the Service setting to Manual.
Night Schedule for Ringing Service no longer follows the schedule but can be
turned on and off by using the feature code and selecting Night Ringing. See
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Using System features 1 1 9
Turning Services on and off using feature codes
The master control for services is in programming. See Turning Services on and off
on page 117. Day-to-day use of Services is controlled using the following feature
codes.
Turns on Ringing service. When used at the
direct-dial telephone, it activates the alternate
direct-dial telephone (extra-dial telephone).
ƒ°‡⁄
Turns off Ringing service.
Turns on Restriction service.
Turns off Restriction service.
Turns on Routing service.
Turns off Routing service.
ƒ£°‡⁄
ƒ°‡¤
ƒ£°‡¤
ƒ°‡‹
ƒ£°‡‹
To turn a Service on:
1. Enter the appropriate feature code from a control telephone.
2. Press NEXT to move through the schedules until the display shows the version
of the service you want to be turned on.
3. Press OK to select the setting, or press QUIT to exit the feature without making
any changes.
To turn a Service off:
1. Enter the appropriate feature code from a control telephone.
Do not confuse activating Normal service with canceling a Service.
Setting a Service to Normal is not the same as canceling a Service using a
feature code. If you set the Service to Normal, the normal version of a
Service overrides any automatic schedule and remains in effect until you
manually cancel it. If you cancel the Service, you return to the automatic
schedule.
Viewing the active Services from a two-line display telephone
When a Service is active, the control telephone display reads Services ON.
1. Press LIST. The display shows the first active Service and the schedule that is
in use.
2. If there are several active Services, press NEXT to see them all.
3. Press EXIT to exit the feature.
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
1 2 0 Using System features
Viewing the active Services from a one-line display telephone
1. Press ƒ°‡‚. The display shows the first active Service.
2. Press £ to move through the active schedule.
3. Press ® to exit.
Displays
You are viewing the active Services. Press £ or NEXT to
<Sched> Restr'n
EXIT
see the other active Services. Press ® or EXIT to quit.
NEXT
NEXT
The name of the current Restriction service schedule is
displayed. Press £ or NEXT to see the other Ringing
service schedules. Press ˙ or OK to select the
desired schedule.
<Sched> Restr'n
QUIT
OK
You are viewing the active Services. Press £ or NEXT to
<Sched> Ringing
EXIT
see the other active Services. Press ® or EXIT to quit.
NEXT
NEXT
The name of the current Ringing service schedule is
displayed. Press £ or NEXT to see the other Ringing
service schedules. Press ˙ or OK to select the
desired schedule.
<Sched> Ringing
QUIT
OK
You are viewing the active Services. Press £ or NEXT to
<Sched> Routing
EXIT
see the other active Services. Press ® or EXIT to quit.
NEXT
NEXT
The name of the current Routing service schedule is
displayed. Press £ or NEXT to see the other Routing
service schedules. Press ˙ or OK to select the
desired schedule.
<Sched> Routing
QUIT
OK
Press˙ or OK to select this schedule,£ or NEXT
to see the next available schedule, or ® or QUIT to exit.
If you select this schedule, it is in effect until the next
automatic schedule takes effect.
<Sched> until *
QUIT OK
NEXT
You have entered the Show Services feature code and
there is no active Service.
No services ON
There is a Service active in your system. Press • or LIST
ON
Services
LIST
to view the active Services.
Services that have been turned on automatically are indicated by an asterisk (*)
before the name on the display. You can neither manually activate nor cancel
scheduled services, although you can override them by manually turning on another
schedule.
The control telephone can override Services that are turned on and off according to
a schedule at any time by entering a Services feature code, and selecting a different
schedule. This override remains in effect until it is canceled. If you select a schedule
with an asterisk (*), the next automatic service schedule comes into effect at the
programmed time.
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Using System features 1 2 1
Direct-dial calls to a direct-dial telephone ring at the extra-dial telephone (the extra-
dial telephone is designated by your installer) only when you enter the Ringing
service feature code (ƒ°‡⁄) at that direct-dial telephone. Note that only
the extra-dial telephone is activated, not the actual Ringing service (unless that
direct-dial telephone is a control telephone).
Tip
Enterprise Edge provides six service schedules named Night, Lunch, Evening,
Sched 4, Sched 5, and Sched 6. Your installer can change these names to suit
your business.
User passwords
User passwords prevent unauthorized or unintentional changes to your Enterprise
Edge system. There are two types of user password: Registration and Call Log.
Registration password
The Registration password is used to control the registration of Companion
page 135 for more information.
Clearing a Call Log password
If an individual has forgotten their Call Log password, you can clear it in
programming. The individual can then enter a new password from his or her
telephone.
You need to start a Unified Manager session to program this feature. See Getting
1. Select Passwords, Call Log pswds.
2. Double-click the DN number.
3. Enter a new Call Log password and press Return.
Using special telephones
Direct-dial
You can reach the direct-dial telephone by dialing a single digit. The direct-dial
telephone is usually in a central location, such as a attendant’s desk. You can have
up to five direct-dial telephones for your Enterprise Edge system. It is usually the
prime telephone or the central answering position (CAP).
The direct-dial telephone can send up to 30 messages and can invoke Services to
activate the extra-dial telephone.
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
1 2 2 Using System features
You cannot forward calls to a direct-dial telephone that is outside your Enterprise
Changing the direct-dial telephone assignments
Your installer sets up the direct-dial telephone.
You can change which direct-dial telephone a telephone is assigned to, or assign it
no direct-dial telephone.
You need to start a Unified Manager session to program this feature. See Getting
1. Select Terminals & Sets.
2. Select a DN number.
3. Double-click Capabilities.
4. Select a Direct dial set: Set 1, Set 2, Set 3, Set 4, Set 5, or None.
Any number of telephones can be assigned to call the direct-dial telephone.
Tip
The digit you dial in order to get the direct-dial telephone to ring can be
programmed by your installer.
The Enterprise Edge system cannot verify that the number you assign as an
external direct-dial telephone is valid. Check the number before assigning it
as a direct-dial telephone, and call the direct-dial telephone after you’ve
assigned it in order to test it.
Hotline
A hotline telephone calls a preset internal or external telephone number when you
pick up the receiver (or press ©).
Tip
Label the telephone to inform anyone using it that Hotline is active.
Bypassing a Hotline
Press a line button, or use the Pre-Dial or Automatic Dial feature before you pick
up the receiver or press © on a hotline telephone. See the Telephone
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Using System features 1 2 3
Making a telephone a hotline telephone
You can set up a telephone as a hotline.
Tip
A Hunt Group set DN can be specified as a Hotline telephone. For more
You need to start a Unified Manager session to program this feature. See Getting
1. Select Terminals & Sets.
2. Select a DN number.
3. Choose Capabilities.
4. Double-click Hotline.
5. Choose a setting: None, Internal, or External.
Internal assigns an internal number.
External assigns an external number. If you select an external number, you can
select the line on which the call is made: the prime line, an external line, a line in a
line pool, or a line selected by the routing table. If you select a line pool, you must
specify the line pool access code. If you select the routing table, the number dialed
is treated as a destination code and is routed according to the routing tables.
A telephone’s prime line, line pool access codes, and access to a line pool can be
programmed by your installer.
Control telephone
The control telephone allows you to place the telephones and external lines for
which it has responsibility into and out of service schedules. See Using alternate or
Using Set lock
Set lock limits the ways in which you can customize your telephone. There are three
levels of Set Lock: Full, Partial, and None. None allows you to access all features
on your telephone.
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
1 2 4 Using System features
Partial prevents:
•
•
programming autodial buttons
•
changing dialing modes
(Automatic Dial, Pre-Dial, and
Standard Dial)
programming user speed dial
numbers
•
•
using Voice Call Deny
•
•
•
programming feature buttons
moving line buttons
saving a number with Saved
Number Redial
changing the display language
Full, in addition to the restrictions outlined for Partial lock, prevents:
•
•
•
•
changing Background Music
changing Privacy
•
•
•
•
using Call Forward all calls
using Send Message
using Trunk Answer
activating Services
changing Do Not Disturb
using Ring Again
Changing Set Lock programming for a telephone
You need to start a Unified Manager session to program this feature. See Getting
1. Select Terminals & Sets.
2. Select a DN number.
3. Choose Restrictions.
4. Double-click Set restrictions.
5. Choose a Set lock setting: None, Partial, or Full.
Using an auxiliary ringer
An auxiliary ringer is a separate device that has to be connected to Enterprise Edge.
Turning the auxiliary ringer for a telephone on or off
You need to start a Unified Manager session to program this feature. See Getting
1. Select Terminals & Sets.
2. Select a DN number.
3. Double-click Capabilities.
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Using System features 1 2 5
4. Choose an Aux. Ringer setting: Y (Yes) or N (No).
Your installer can program the auxiliary ringer to start ringing for incoming lines as
part of Ringing Service.
Using Host System dialing signals
You can access host systems, such as private branch exchanges (PBX) from
Enterprise Edge by using host system signaling features (known as end-to-end
signaling). These features either send a special signal to the host system or allow
you to program delays required by host systems in external autodial or speed dial
sequences.
Link
ƒ‡⁄
If your Enterprise Edge system is connected to a private branch exchange (PBX),
you can use a Link signal to access special features. On some telephones, Link is
called FLASH.
The Link signal can be included as part of a longer stored sequence on an external
autodial button or in a speed dial code. The Link symbol (¤) uses two of the 24
spaces in a dialing sequence.
Preventing a telephone from using Link
Link can be restricted at individual telephones. You need to start a Unified Manager
information.
1. Select Terminals & Sets.
2. Select a DN number.
3. Choose Restrictions.
4. Double-click Set restrictions.
5. Choose an Allow Link setting: Y (Yes) or N (No).
Tip
If your Enterprise Edge system is connected to a private branch exchange
(PBX), program Link onto a memory button for one-touch access.
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
1 2 6 Using System features
Pause
ƒ‡°
The Pause feature enters a 1.5 second delay in a dialing sequence on an external
line. This is often required for signaling remote devices, such as answering
machines, or when reaching through to PBX features or host systems.
You can program more than one pause in an external autodial or speed dial
sequence.
The Pause symbol (›) uses one of the 24 spaces in a dialing sequence.
For pulse dialing, • inserts a 1.5 second pause into the dialing sequence.
Long Tones
ƒ°‚°
The Long Tones feature allows you to control the length of a tone so that you can
signal devices such as fax or answering machines which require tones longer than
the standard 120 milliseconds.
1. While on a call, press ƒ°‚°.
2. Press the dial pad buttons to produce the appropriate tones. Each tone sounds
for as long as you hold down the button.
Long tones can be used on any call except a conference call. You can use internal
lines of the Enterprise Edge system to activate a device connected to an Enterprise
Edge ATA2 or an ASM in another area of your office, or external lines to access
devices outside the Enterprise Edge system.
Displays
At the appropriate time, press any dial pad
button. Hold each button down for as long as
necessary. Press ƒ or ˙
to cancel Long Tones.
Long Tones:
Programmed Release
ƒ•°·
The Programmed Release feature performs same function as ® in a programmed
dialing sequence. When the system encounters Programmed Release in a dialing
sequence, it stops dialing and hangs up the call.
The Programmed Release symbol (fi) takes up two of the 24 spaces in a
programmed dialing sequence.
The system ignores any digits or commands that follow a Programmed Release in
a programmed dialing sequence.
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Using System features 1 2 7
Run/ Stop
ƒ•·
Run/Stop inserts a break point into a sequence of dialed numbers or characters used
for automatic dialing. This may be necessary when you are connecting to a PBX or
similar host system.
For example, you can call a company with an automated attendant that instructs you
to dial the internal number you need. You can program the company number, a Run/
Stop, then the internal number on one external autodial button. Press the autodial
button once to dial the company number. When you hear the automated attendant,
press the autodial button again to dial the internal number.
The Run/Stop symbol (fl) uses one of the 24 spaces in an autodial or speed dial
sequence.
You can include up to three Run/Stop commands in a dialing string. The system
ignores a fourth Run/Stop, and any digits or commands that follow it in a
programmed dialing sequence.
Wait for Dial Tone
ƒ°‚›
Wait for Dial Tone causes a sequence of numbers to pause until dial tone is present
on the line before continuing to dial. This is useful if you must dial a remote system
and then wait for dial tone from that system before dialing the rest of your number.
The Wait for Dial Tone symbol (‡) uses two of the 24 spaces in an autodial or
speed dial sequence.
Displays
You have entered a code that can be used only in a
programmed autodial or speed dial sequence, not on a call
you dial directly. Programmed Release and Run/Stop are
for use in programmed dialing sequences only.
Invalid code
Using pulse dialing for a call
If your external telephone lines use pulse dialing, you can temporarily switch to
tone dialing by pressing £ after selecting the line. Tone dialing allows your
Enterprise Edge telephone communicate with devices and services that respond to
tone signals, such as automatic switchboards, and fax or answering machines.
Using your Enterprise Edge system from an external location
You can use the lines and some of the features of an Enterprise Edge system from
outside the system. You can do this over the public telephone network when you are
away from the office, or you can call from another system, over a private network.
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
1 2 8 Using System features
An example of how remote access works is a sales representative who spends a lot
of time out of the office needs to make long distance calls to the European office.
Your Enterprise Edge system has a leased line to Europe with reduced transatlantic
charges. You provide the sales representative with a Class of Service password that
gives access to the transatlantic line. The sales representative can then telephone
into the Enterprise Edge system from a hotel, enter their Class of Service password,
and use the leased transatlantic line to make calls.
Remote users can access Enterprise Edge lines, line pools, the page feature, and
remote administration (if enabled through Software Keys). The exact facilities
available to you through remote access vary depending on how your installer set up
your system.
Tip
If the loop start line used for remote access is not supervised, auto-answer
does not function and the caller hears ringing instead of a stuttered tone or the
system dial tone.
Controlling access to your Enterprise Edge system
It is important to maintain the security of your Enterprise Edge system by limiting
access to authorized users and limiting those users to the features they need.
Remote users can make long distance calls.
Remember that a remote user can make long distance calls that are charged to
your company and can make page announcements in your office.
Direct inward system access (DISA)
Control access to your Enterprise Edge system with direct inward system access
(DISA). Access to your Enterprise Edge system from the public telephone network
should always be controlled with DISA. If your installer programs the line used for
remote access to answer a call automatically and wait for a DISA internal number,
callers hear a stuttered dial tone and must enter a Class of Service password before
they are allowed into the system.
Class of Service (COS)
To control the level of telephone service a remote user can access, your installer can
assign a remote filter and remote package to the line used for remote access. The
remote filter restricts the numbers that can be dialed on the line, and the remote
package restricts the use of line pools and the page feature. To change the
restrictions for the line, the user can enter their Class of Service (COS) password
when the system answers with DISA, or can dial the DISA internal number and
enter their Class of Service password.
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Using System features 1 2 9
Maintaining security
To maintain the security of your system, the following practices are recommended:
•
Warn anyone to whom you give the remote access number, to keep it
confidential.
•
•
Change Class of Service passwords often.
Warn anyone to whom you give a Class of Service password, to remember it
and not to write it down.
•
Remove the Class of Service password of anyone who leaves your company.
Accessing Enterprise Edge remotely over the public network
1. Dial the Enterprise Edge system’s remote access number.
2. When you hear a stuttered dial tone, enter your COS password.
3. Wait for the system dial tone.
To use the system remotely, you must use a telephone with tone dialing to call the
system. Remote access is possible only on lines that your installer programs to
auto-answer calls.
To use features on a remote Enterprise Edge system, press • followed by the
feature code. Even if you are calling from an Enterprise Edge system, press •
instead of ƒ.
In certain situations, you may experience lower volume levels when using
Enterprise Edge remotely.
Tones
You may hear some of the following tones while accessing Enterprise Edge
remotely.
Tone
Busy tone
What it means
Dialed a busy line pool access code. You hear system dial
tone again after 5 seconds.
Enterprise Edge
system dial tone
You may use Enterprise Edge remotely.
Fast busy tone
You have done one of the following
Entered an incorrect COS password. Your call is disconnected
after five seconds.
Taken too long while entering a COS password. Your call is
disconnected after five seconds.
Tried to use a line pool or feature not permitted by your Class
of Service. You hear system dial tone again after five seconds.
Dialed a number in the Enterprise Edge system which does
not exist. Your call is disconnected after five seconds.
Stuttered dial tone
Enter your COS password.
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
1 3 0 Using System features
Using Class of Service (COS) passwords
Class of Service passwords permit controlled access to a system’s resources both
by internal and remote users. When you enter a Class of Service password at a
telephone, the restriction filters associated with your Class of Service password
apply, rather than the normal restriction filters. Similarly, when a remote user enters
a Class of Service password on an incoming auto-answer line, the restriction filters
and remote package associated with their Class of Service password apply, rather
than the normal restriction filters and remote package. COS passwords are
programmed by your installer.
Users should memorize their COS passwords instead of writing them down.
Employees’ COS passwords should be deleted when they leave the company.
Typically, each user has a separate password. Several users can share a password or
one user can have several passwords.
Changing your Class of Service
ƒfl°
You must enter a Class of Service password each time you want to make a call that
is normally restricted on a line or telephone.
To change the restriction filters on a line or telephone:
1. Press ƒfl°.
2. Enter your six-digit COS password.
COS passwords allow you to define individual passwords and determine the
restriction filters, and remote package associated with each.
Tip
If you use your Enterprise Edge system from outside the office, you may have
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
General System features
17
The following features are available for the entire Enterprise Edge system.
Pulse or tone dialing
If your external lines use pulse dialing, you can switch temporarily to tone dialing
to communicate with devices such as answering machines, to access the features
that PBX systems may offer, or to use another Enterprise Edge system remotely.
Press £ while on an active line. Once you hang up, your telephone returns to pulse
dialing.
Disconnect supervision
When Disconnect Supervision is assigned to a line, the Enterprise Edge system
monitors it to detect if an external caller hangs up. This allows the system to release
the line for other uses. Your installer assigns disconnect supervision.
Hunt Groups
Your Enterprise Edge system now allows you to establish Hunt Groups in your
system. Hunt Groups are a group of Enterprise Edge sets that can be called by a
single directory number. The Hunt Groups feature ensures calls are easily routed to
the appropriate people. For more information on Hunt Groups see Programming
Internal numbers
Each telephone in the Enterprise Edge system has its own internal number. The
length of internal numbers in your system can be from two to seven digits on a non-
expanded system, and three to seven digits on an expanded system. All numbers in
your system are the same length. Your installer sets the length of internal numbers
(called the DN length). The default DN length is three.
To find out your internal number, use the Button Inquiry feature (ƒ•‚)
on an intercom button. On the M7100 telephone, Button Inquiry shows your
internal number followed by the function assigned to your single-memory button.
Line assignment
Any of the lines in your system can be assigned to any of your telephones. Your
installer assigns lines to telephones in Configuration programming. Lines can be
assigned to appear only, appear and ring, or to ring only.
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
1 3 2 General System features
Usually, only the lines that are appropriate for a particular person appear at that
person’s telephone. When a line is assigned to a telephone it is automatically given
a line button on that telephone, if a button is available. The M7100 telephone has
no line buttons for its lines.
Calls on lines that ring but do not appear at a telephone are presented at an intercom
button.
You may be able to answer a call on a line that does not appear or ring at your
telephone. To pick up such a call, use Call Pickup, Call Park, or Trunk Answer.
A telephone may have buttons assigned for lines 001 to 003, but have only lines 001
and 002 programmed to ring as well. An incoming call on any of the three lines
causes a line button indicator to flash, and the telephone can be used to answer the
call. This is especially useful for people who monitor other telephone lines, but
want only their own lines to ring.
Target line
A target line is used to route a call directly to a particular telephone or group of
telephones. Target lines are used only for incoming calls. A single incoming line
may provide connections to several different target lines. This allows each person
or department in the office to have their own number without having a separate
external line for each number.
Line pools
A line pool allows each telephone access to external lines from a group (or pool) of
external lines. You can access such lines by pressing an intercom button and
entering a line pool access code or by pressing a memory button programmed with
the line pool feature code and a line pool access code.
Overflow call routing
If a call comes in for a target line that is busy, Enterprise Edge routes the call to the
prime telephone for that target line. If there is no prime telephone assigned to the
target line or if a call cannot be directed to a target line, the call goes to the prime
telephone for the external line used.
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
General System features 1 3 3
Overflow routing for incoming calls is used with the Routing Service programmed
by your installer. A Service must be active for overflow routing to be in effect.
Overflow routing is not available in normal service.
Tips
When you make a call and the programmed route is busy, you hear the
expensive route warning tone and see a display indicating that an expensive
route is being used. To avoid using the normal, expensive route, release your
call.
Because overflow routing directs calls using different line pools, a call may
be affected by different line filters when it is handled by overflow routing.
M7100 telephone
Because the M7100 telephone does not have line buttons, it sometimes works
slightly differently from other Enterprise Edge telephones. Where other telephones
can require that you select a line button to answer a call, on the M7100 telephone
you simply pick up the receiver. Where other telephones require you to select a line
button to take a call off hold, you press ˙ on the M7100 telephone.
On M7100 telephones, you can answer a second call by pressing ˙. Your
active call is put on hold and you are connected to the waiting call. You can have
no more than two calls at a time.
The M7100 telephone cannot have a © button. When applicable, special
instructions for the M7100 telephone are included with each feature description.
Memory buttons
Memory buttons are the buttons with indicators on the M7310, M7208, and M7324
telephones, and the dual buttons without indicators on the M7310 telephone. There
is a single memory button, without an indicator, on the M7100 telephone. Memory
buttons can be used as answer, autodial, line, and programmed feature buttons.
Line, intercom and answer buttons must have indicators.
One-line display
The M7100 telephone has a one-line display. Other Enterprise Edge telephones
have a second line on the display which shows the functions of the three buttons
directly below it.
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
1 3 4 General System features
Some display buttons, such as TRANSFER and ALL, are simply shortcuts which are not
available on a one-line display.
Other display buttons, such as OK and SHOW, perform essential functions. For a
one-line display telephone, use the following buttons instead of these display
buttons.
Substitutes for display buttons
Display button
OK
Dial pad button
˙
QUIT
®
ADD
•
SHOW
£
CANCEL
VIEW
£
£
OVERRIDE
BKSP
£
√
All displays listed in this book are shown as they appear on the two-line display.
Prime line
Your telephone can be programmed to select an internal or external line or a line
pool automatically whenever you lift the receiver or press ©. This is your
prime line.
Private lines
A private line is exclusive to a particular telephone. Calls that are put on hold or left
unanswered on a private line cannot be picked up at any telephone except the prime
telephone.
Volume bar
The volume bar controls the volume of the receiver, telephone ringer, handsfree
speaker, and headset. Press either end of the volume bar √ to adjust the
volume.
Wall mounting
Enterprise Edge telephones can be mounted on a wall. Contact the installer if you
want to have any telephones in your system wall-mounted.
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Companion Features
18
Programming Companion Wireless
Programming specific to Companion Wireless features are covered in this chapter.
For general programming instructions, please refer to “Getting Started” on page 13.
Two portable telephones are supported in Enterprise Edge: the Companion C3050
Etiquette and the Companion C3050 CT2Plus.
Registration password
The portable telephones must be registered with the Enterprise Edge system before
they can be used. The recommended steps are as follows:
1. Change the registration password for your system.
2. Enable registration for the system.
3. Confirm the availability of directory numbers (DNs) for each portable
telephone.
4. Individually register each portable telephone.
5. Disable registration for the system.
Changing the Registration password
To ensure unauthorized portables are not registered to your system, a separate level
of password access is provided. You can, and should, set your own password to
prevent unauthorized handsets from registering on your system. You can change the
Registration password under the Passwords heading in programming.
Change password to avoid incorrect registration.
To ensure accurate registration, change the Registration password before
registering any portables. If there is another wireless system in radio range,
and both systems have the same Registration password and registration
enabled, you may accidentally register on the other system instead of on your
own.
The default Registration password is RADIO (‡¤‹›fl).
To program a new registration password:
1. Select Passwords.
2. Double-click Registration.
3. Enter a new password and press Return.
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
1 3 6 Companion Features
Record the password in the Programming Record.
Tip
You can choose any combination of one to six digits. It is easier to remember
the password if the digits spell a word. Provide this password only to selected
personnel to prevent unauthorized access to programming. The implications of
such access may include the rearrangement of line assignments, which could
affect the operation of the Enterprise Edge system.
Portable telephone programming
You need to start a Unified Manager session to program portable telephone settings.
Select Resources, Telephony, Companion to program these settings.
Registration
Software Keys are required to activate wireless capabilities for the
Companion C3050 Etiquette and Companion C3050 CT2Plus
To take advantage of the wireless capabilities available to your Enterprise
Edge system, you must first enable a certain number of portable credits using
Software Keys purchased through Nortel Networks. For more detailed
information on enabling Enterprise Edge, see the Enterprise Edge
Programming Operations Guide.
You must enable registration for the entire Enterprise Edge system to allow
registration of individual portables. The options are Yes (Y) and No (N). Yes
indicates that Registration is enabled. No is the default and indicates that
Registration is not enabled.
To enable user registration:
1. Select Telephony, Companion.
2. Double-click Registration.
3. Select a Registration enabled option: Y (Yes) or N (No).
Registration should normally be disabled.
For security reasons, and to prevent unauthorized users from being registered
to your system, set registration to N when you have finished registering the
portables.
Portable DNs
Once registration is enabled for your Enterprise Edge system, a series of extension
numbers (469 to 500) automatically becomes available for registration. Check that
an extension number is available before registering a portable telephone to it.
If the extension number shows a status of Available, it is ready for registering a
portable telephone.
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Companion Features 1 3 7
If the extension number shows a status of Registered, a portable telephone is already
registered to that extension number. In this case, you can either pick a different
extension number, or deregister the current portable telephone. You must perform
deregistration both at the portable and during a Unified Manager programming
session.
To view registered and available DNs:
1. Select Telephony, Companion, Registration, Portable DNs.
2. Double-click a portable DN (for example, DN 471).
Deregistering a portable
Deregister an extension number when:
•
•
you must replace the portable due to loss or breakage
you want to assign the handset to someone with a different telephone number
than the previous user
To deregister a portable:
1. Select Telephony, Companion, Registration, Portable DNs to deregister a
DN.
2. Double-click a portable DN (for example, DN 471).
3. Click the Configuration menu and select Deregister.
Tip
This procedure does not clear the registration data in the portable. You must
also deregister from the portable telephone (“on-the-air” deregistration). For
instructions, see the Portable Telephone User Guide that is supplied with
the portable.
Radio data
Re-evaluation
Re-evaluation automatically assigns the proper cell configuration to each radio in a
Base Station. When adding or removing Base Stations, Re-evaluation must be
applied to the system.
Re-evaluation Status
To view the Re-evaluation status:
1. Select Telephony, Companion, Radio data.
2. Double-click Re-evaluation.
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
1 3 8 Companion Features
3. Click the Configuration menu and select Re-eval now or Schedule.
Radios
Radio programming settings apply to Base Stations.
Cell assignment
A cell is the area covered by one or more radios in close proximity. As you move
around your office while on a call with your portable, the call is handed off from
one cell to another. A call on a portable can be handed off from one cell to another
only if those cells are programmed as neighbors. The Enterprise Edge system
automatically assigns cell neighbors and re-evaluates the cell-to-cell configuration
when Base Stations are added or removed.
The cell assignment setting allows you to see if a Base Station radio is assigned or
unassigned to a cell in the Enterprise Edge system.
To view the cell assignment:
1. Select Telephony, Companion, Radio Data, Radios.
2. Double-click Radio nnnn.
where nnnn is the four-digit radio number.
Cells
Cell programming allows you to examine the cell radio, cell neighbor, and cell radio
neighbor configurations. Select Telephony, Companion, Radio Data, Cells and
enter the cell number (01 to 32).
Cell radios
This subheading allows you to view the 5-digit number of any radios assigned to
this cell. For example, if radio 07012 is in the cell, the display shows 07012 asgned.
Select Telephony, Companion, Radio Data, Cells, Cell radios and enter the 5-
digit radio number to view the setting: Assigned or Unassigned.
Cell neighbors
This subheading allows you to view the 2-digit number of any cells that border a
particular cell in a system. Select Telephony, Companion, Radio Data, Cells, Cell
neighbors and enter the cell number to see the settings: Assigned or Unassigned.
For example cell 01, the display shows Nghbr:03 and Nghbr:04. This means that cells
03 and 04 have been assigned as cell neighbors.
Cell rad neighbors
This subheading allows you to view the 2-digit number of any cells that border a
particular cell in a system (the cell neighbors) plus any cells that border the cell
neighbors. Select Telephony, Companion, Radio Data, Cells, Cell rad neighbors
and enter the cell number to see the settings: Assigned or Unassigned.
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Companion Features 1 3 9
For example cell 01, the display shows Rad nghbr:03, Rad nghbr:04, and Rad nghbr:11.
Cell 11 does not appear as a cell neighbor (see the example under Cell nghbr),
therefore it must be a neighbor of cell 03 or 04.
Registering individual portables
You must do two things to register each portable with the Enterprise Edge system:
•
•
Register the portables by entering the Registration password on each one.
Verify that the portable operates properly.
For instructions on registering and verifying each portable with the Enterprise Edge
system, refer to Enterprise Edge Programming Operations Guide.
For instructions on operating a portable, see the Portable Telephone User Guide
that is supplied with the portable.
When you distribute the portables, tell the users that the portables are registered and
give them the corresponding extension numbers.
Tips
You can register a portable to more than one system. You cannot register a
portable to more than one extension number per system, nor can you register
more than one portable to one extension number.
If a portable telephone is to be used in more than one Enterprise Edge
system, its owner must know which registration slot number was used to
register the portable telephone with each system. (It is preferable that each
user have the system they use most often registered in slot 1.)
If a portable telephone is lost or broken, deregister it from the system before
replacing it with another portable telephone.
System programming
Once the registration process is complete, portable telephone programming is much
the same as it is for Enterprise Edge desk telephones. Some of the programming
settings do not affect the operation of the portable.
Enterprise Edge system.
The following table shows the recommended settings for your Enterprise Edge
system:
Heading
Setting
Notes
Terminals&Sets
Capabilities
Fwd no answer
Fwd to: <DN>
Fwd delay:
<number of
rings>
Fwd on busy
DND on Busy
Y
N
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
1 4 0 Companion Features
Heading
Setting
N
Notes
Handsfree
HF answerback
Pickup group
None
<group
number>
A portable can be part of a pickup group and
answers calls ringing at telephones in the same
group when the user enters •‡fl.
Paging
Y
Page zone
D-Dial
1
Set 1
A portable cannot be a Direct-Dial telephone. It can
use the Direct-Dial digit.
Hotline
None
Y
Priority call
Requires special configuration of hardware and
programming
Restrictions
Set restrictions
Set lock
Y
Y
Y
Y
Does not apply to portables.
Does not apply to portables.
Does not apply to portables.
This can be set to N for portables.
Allow last no
Allow saved no
Allow link
Twinning between portables and Enterprise Edge wireline telephones
Using Answer DNs
If you have both a wireline (desk) telephone and portable telephone you can answer
calls from either device by using Enterprise Edge’s Answer DN feature. Any call
that normally rings at your desk can also appear and ring at your portable if it is
assigned the desk telephone DN as an Answer DN. This arrangement is called
twinning.
It is also possible to have calls to the portable appear on the desk telephone as an
Answer DN.
An Answer DN for a desk telephone and portable is programmed exactly the same
way as for two desk telephones. An installer programs Answer DNs.
You can have up to eight Answer Keys assigned to your portable.
The types of calls that your portable’s Answer Keys receive are programmable. See
the “Answering calls” on page 29 for more information.
Tips
Hunt Group calls cannot be forwarded using the Call Forward features.
An Answer DN is the recommended method for twinning a portable with a
desk set. This ensures that all calls arriving at the desk telephone appear and
ring at the portable. A twinned portable using an Answer DN does not ring for
an incoming call if it is currently on another call.
Voice mail message waiting indication occurs on the twinned portable only if it has
been assigned a voice mail box.
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Companion Features 1 4 1
If your voice mail box has been assigned to your desk set, log on using the desk set
DN when accessing the voice mail box from the twinned portable.
For more detailed information on how to access voice mail using your portable,
refer to Portable Telephone Feature Card that is supplied with the portable
telephone.
Using target lines
Wireline and wireless telephones can be twinned using target lines. The line for the
desk telephone can be configured to appear on the portable, or the line for the
portable can appear on the desk telephone. Incoming external calls ring at both.
When you twin wireline and wireless telephones using line assignments, each
telephone has its own internal DN. When someone wants to call you or forwards a
call to you internally, they must choose between the desk telephone and the portable
DN. The call appears and rings only at the internal DN that was dialed.
Tip
A portable can have an Answer DN and share a line assignment with a desk
telephone.
Using your portable telephone
Your portable telephone communicates with the Enterprise Edge system using
radio waves. The radio transceivers for the system are located in the Base Stations
installed around your office. Each Base Station contains two radio transceivers and
can handle two portable telephone calls at once.
Your portable telephone is truly portable. Not only can you start a telephone
conversation anywhere in the office, you can continue that conversation while you
walk through the building. As you move from one part of your office to another,
your call is handed off from one Base Station to another.
If you notice a decrease in voice quality while moving with a portable telephone,
you are moving out of range of your system’s Base Stations. There are three
possible reasons for this:
•
•
•
The Base Stations that cover the area you are moving into may already be busy
and therefore cannot pick up your call.
Large pieces of furniture or movable partitions may have been moved into a
position that blocks the signal between you and the Base Station.
You may have moved out of the area covered by your Enterprise Edge system.
(Retrace your steps until you are back in range.)
In rare instances, during an Enterprise Edge Message session, softkey display
prompts on your portable may disappear. This is a normal condition and is
minimized by staying within the Enterprise Edge coverage area.
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
1 4 2 Companion Features
While moving within an Enterprise Edge coverage area, a slight “clipping” may be
heard during a call. This indicates that your call has been “handed off” from one
radio cell to the next.
Problems with lost connections are rare, but if you notice an increase of such
incidents after making large changes in the layout of your office, your Base Stations
may need to be moved or reprogrammed to accommodate the new arrangement. In
this case, contact your installer to change the Base Station configuration. (In the
U.S. you need to obtain UTAM Inc. approval before making changes to the Base
Station configuration.) Refer to Enterprise Edge Programming Operations Guide
for more information.
Tip
If you try to send a message from a desk telephone to a portable telephone, the
display of the desk telephone shows Can’t send msg.
Using Enterprise Edge features
It is possible to use many of the same Enterprise Edge features available to an
Enterprise Edge telephone on your portable telephone. The table below lists which
features are available for use on your portable telephone. For additional information
on features and the special key sequences required to use them, refer to the feature
card that is supplied with your portable telephone.
Features supported by Enterprise Edge portable telephones
Feature
Description
Call Forward
Send calls to another telephone in your Enterprise Edge system. The
display does not indicate that calls are being forwarded.
Hunt Group calls override all Call Forward features. A Hunt Group DN
can be a Call Forward destination.
Call Information
Display the name or extension of an internal caller. In addition, if your
system is equipped to receive CLASS information (Caller ID), the
external caller is displayed.
Call Park
On your portable, park a call.
Call Park Retrieval
On your portable, retrieve a parked call.
Cancel Call
Forward
Cancel the Call Forward feature, where calls are automatically sent to
another telephone in your Enterprise Edge system.
Conference
See your Portable Telephone Feature Card.
Directed Call
Pickup
Answer any telephone that is ringing in your Enterprise Edge system.
Group Pickup
Answer a call ringing on another set in the same pickup group.
Host system
signaling
Link and pause are available. See “Using System features” on page
117 for more information.
Line Pool
Mute
On your portable, use line pools the same way a desk telephone does.
Prevent the person you are on the portable telephone with from
hearing you. Also, you can mute a portable’s ringing for an incoming
call.
Page
On your portable, page an individual telephone, several telephones,
external speakers, or the entire system.
A Hunt Group DN cannot be in a page zone.
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Companion Features 1 4 3
Feature
Pause
Description
Program in an external autodial sequence to insert a 1.5 second delay.
Prime line
On your portable, may be either an Intercom Line, an Assigned Line or
a Line Pool.
Priority call
Privacy
Hunt Groups reject priority calls.
In programming, change the privacy setting for an external line
assigned to the portable. This does not give the ability to change the
privacy setting on a call by call basis.
Release
See your Portable Telephone Feature Card.
Speed Dial
System speed dial codes only. No personal speed dial codes. The
portable has a directory that you can use to store up to 50 entries for
telephone numbers.
Switching between
two calls
When on a portable call, switch to another incoming call. You can then
switch back to the first call. See your Portable Telephone Feature
Card.
Transfer
See your Portable Telephone Feature Card.
Transfer using
directory
Transfer a call using your portable’s directory. See your Portable
Telephone Feature Card.
Trunk Answer
Voice call
Grab a ringing call for lines placed in a Service Mode.
Hunt Groups reject voice calls.
Wireless Portable
Language
Selection
Change the language of the prompts as they appear on the portable’s
display.
Wireless Call
Forward No
Answer
Stop the portable from ringing when the call has been forwarded to its
new destination. The portable user can still answer the call but it does
not ring.
Using new features
Directed Call Pickup
You must turn on the Directed Call pickup feature for the system before a user can
use the feature. The Enterprise Edge Programming Operations Guide contains
additional programming information for this feature.
Group Pickup
Group Pickup allows the portable user to answer a call ringing on another set in the
same pickup group. Enterprise Edge programming allows you to place all
telephones, including portable telephones, into pickup groups.
Group pickup.
Wireless Portable Language Selection
This feature allows you to change the language as they appear on the portable’s
display, including both the display prompts and voice prompts from voice mail.
Enterprise Edge supports English, French and Spanish.
English
Press ••fi‚⁄.
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
1 4 4 Companion Features
French
Press ••fi‚¤.
Spanish
Press ••fi‚‹.
a language for the display.
Wireless Call Forward No Answer enhancement
This improvement stops the portable from ringing when the call has been forwarded
to its new destination. The portable user can still answer the call, but it does not ring.
The settings for Call Forward No Answer are found under Terminals & Sets in the
Unified Manager. See “Frequent programming operations” on page 23 for more
information.
Supporting additional features for portables
Two additional Enterprise Edge features can be used with a portable if lines and
hardware (an Enterprise Edge ATA2) are specifically configured to support them:
•
•
Voice Call (•flfl)
Priority Call (•fl·)
Your installer can set up and program your system to support these features.
Refer to the Portable Telephone Feature Card that is supplied with the portable for
the special key sequence required to use this set of features.
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
19
Using the alarm telephone
An alarm telephone displays Enterprise Edge’s system alarm codes, should they
occur. It is an Enterprise Edge telephone with a two-line display (M7310 or M7324
telephones) that the installer has assigned as an alarm telephone.
Note: Alarms are also stored in the WinNT Network Event log. For more
information, see the Enterprise Edge Programming Operations Guide.
Reporting and recording alarm codes
If an alarm message appears on the alarm telephone’s display:
1. Record the alarm number.
2. Call your customer service representative and report the alarm code.
Displays
Report this alarm and the time it occurred to
your installer or customer service
representative.
Alarm:
TIME
61-4-2
Testing the telephone
If you suspect something is wrong with a button, the speaker, the displays, or some
other part of the Enterprise Edge telephone hardware, you can do a quick test to see
which part of the telephone is broken.
Tips
Ensure that the function of a button matches its label by pressing
ƒ•‚and then the button to see its function.
You can end the telephone testing session anytime by pressing ® or
ƒ unless you are testing those buttons. The test feature times-out
after 30 minutes of no activity.
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
1 4 6 Troubleshooting
Testing the telephone display
Use a display test if you suspect that one of the indicators on the telephone is not
working.
1. Press ƒ°‚fi. The display reads Display test.
2. Press TEST or ˙ to go ahead with a display test.
3. Adjust the contrast for the telephone display so you are able to see the test
results clearly. Enter a number to change the contrast or press DOWN and UP.
4. Press OK or ˙ to go ahead with the test.
During the test, the display should be filled with solid, dark blocks and all the
indicators next to the buttons on the telephone should be turned on. Any Busy Lamp
Field (BLF) or CAP modules that are attached to the telephone should be
completely lit. You lose any information that was showing on the BLF before the
test started.
Pressing any button ends the test.
Testing the telephone buttons
1. Press ƒ°‚fi, then £ or NEXT.
2. Press TEST or ˙ to go ahead with a button test.
3. Press button to see its function. If the button you pressed uses an indicator, it
should turn on when you test the button.
4. Pressing the ® button puts Rls button on the display briefly and returns you
to the Button test display.
Testing the speaker in the telephone handset
The handset test is not available if you have a headset plugged into the telephone.
1. Press ƒ°‚fi, then £ or NEXT twice. The display reads Handset test.
2. Press TEST or ˙ to go ahead with a handset test.
3. Pick up the handset and listen. You should hear dial tone through the handset
at a maximum volume. The volume is reset to maximum only while the test is
going on.
Pressing any button or hanging up ends the test.
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting 1 4 7
Testing the telephone headset
The headset test is not available to telephones that do not have a headset jack or a
headset plugged in.
1. Press ƒ°‚fi, then £ or NEXT until the display reads Headset test.
2. Press TEST or ˙ to go ahead with a headset test.
You should hear dial tone through the headset. The volume is reset to a default level
during the test.
Pressing any button ends the test.
Testing the telephone speaker
1. Press ƒ°‚fi, then £ or NEXT until the display reads Speaker test.
2. Press TEST or ˙ to go ahead with a speaker test.
You should hear page tone through the telephone speaker at the maximum volume.
The volume returns to its previous setting when you end the test.
Pressing any button ends the test.
Testing the power supply to a telephone
1. Press ƒ°‚fi, then £ or NEXT until the display reads Power test.
2. Press TEST or ˙ to go ahead with a power supply test.
You should see all the indicators on the telephone go on and hear ringing at
maximum volume. When the test has ended, the display should briefly show
Power OK.
The test lasts for five seconds or until you press a button.
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
1 4 8 Troubleshooting
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Common feature displays
20
You may see the following displays when you use a feature.
Someone is already using programming, or the feature you are trying
Access denied
Denied in admin
Feature timeout
Inactive feature
Invalid code
to use is not compatible with the configuration of the telephone or
line.
You have tried to use a feature, but you have not been given access
to it in administration programming.
You have taken more than 15 seconds to press a button in response
to a display.
You have entered a feature code that is used by an application
program that your system does not have.
You have entered an invalid feature code.
You have tried to use a feature that is not available in the present
setup of your Enterprise Edge system.
Not available
Set locked
You cannot use the feature you have chosen because your
Press £ or press VIEW‚ or ·VIEW to view a number that is too long
to fit on the display. Press ˙ or OK when you are finished.
1234567890123...
VIEW‚
OK
This indicates a long distance call. (May be available with Call
Display services.)
§
You are receiving an internal call from telephone 239 forwarded by
telephone 221 or you have an Answer button for telephone 221 and
an internal call from 239 is ringing on 221.
239>221
You are connected to an internal call. Press TRANSFER to transfer
the call.
221
TRANSFER
You are receiving a call from telephone 221.
221 calling
You have received a Ring Again offer for a call to an internal
telephone. Press the flashing internal line button or YES to call the
number again. On the M7100 telephone, just lift the receiver.
Otherwise, press NO or wait 30 seconds for the Ring Again offer to
expire. For an explanation of Ring Again, see “Using Ring Again” on
Call 221?
YES
NO
The person has not answered the camped call. The call has come
back to you. Press the line button or CALLBACK to reconnect to the
call.
Camped: 221
CALLBACK
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
1 5 0 Common feature displays
You are connected to an external call. Press TRANSFER to transfer
the call.
Line061
TRANSFER
You are receiving an external call forwarded from telephone 221 or
you have an answer button for telephone 221 and an external call is
ringing on that telephone.
Line061>221
The call on line 061 is being transferred to you by someone else in
your Enterprise Edge system.
Line061 transfer
Line061 waiting
No calls waiting
No line selected
Not in service
A camped call is waiting. Press the line button or use Call Queuing
to answer the call. Press ˙ if you have a M7100 telephone.
You tried to use Call Queuing but no call was ringing at your
telephone.
There is no call ringing at your telephone. If you have a flashing line
button but your telephone is not ringing, press the line button to
answer the call on that line.
The telephone to which you directed a call is not in service or is
otherwise unavailable. The call is returned to your telephone.
No one answered the call you parked. The call has come back to
you.
Parked call
CALLBACK
You have used the Call Queuing feature without picking up the
receiver. Auto Handsfree has not been assigned to your telephone.
You must use the receiver or © to answer a call.
Pick up receiver
You are receiving a priority call. If you are on another call, inform the
person you are speaking to that you are about to put the call on hold.
Press the flashing line indicator of the priority call or wait until the call
connects automatically (in eight seconds). The priority call goes
through when you hear the next beep. Your active call is placed on
Exclusive Hold. It is reconnected automatically when the priority call
ends (unless you transfer the priority call, in which case you must
press the line button of your original call to reconnect). Use DND
(ƒ°fi) or press BLOCK to reject a priority call.
Priority> 221
BLOCK
You have no free line buttons on which to receive a call. Release one
of your current calls and try again to answer the incoming call.
Release a call
Use line pool?
You have received a Ring Again offer for a line pool. Press the
flashing internal line button or YES to use the line pool. On the M7100
telephone, just lift the receiver. Otherwise, press NO or wait 30
seconds for the Ring Again offer to expire.
YES
NO
You cannot program a feature button while you are on a call.
Hold or release
Release calls
Line in use
You have tried to use a feature while you were on a call or had calls
on hold. Release the call or calls, before using the feature.
The line is in use. Make the call using normal methods or wait until
the line is free.
You have tried to make, receive or pick up a call when no line button
was available. Some features require you to have a button free.
Releasing calls can free up line buttons.
No button free
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Common feature displays 1 5 1
The feature you tried to use requires you to be on an active call at
your telephone. This display appears when information about a call
has been cleared by a system reset.
Make calls first
No free lines
All the lines or line pools available to the telephone are in use. This
display appears when you have tried to dial an external number or
use a feature that conflicts with the lines, line pools or prime line
used by the telephone. This must be corrected by your installer.
The telephone has been set up to dial an external number on a prime
line but the telephone does not have a prime line. This must be
corrected by your installer.
No line selected
In use:221
Incoming only
9__
You have tried to program redirection while someone else is
programming redirection. Only one person can program line
redirection at a time.
The line you are trying to use for redirecting calls is for incoming calls
only. Choose an outgoing line.
Continue entering digits. Press√ or BKSP to delete
incorrect digits. Press ˙ or OK when you are finished.
QUIT
BKSP
OK
You have entered an invalid line pool code or an invalid destination
code.
Invalid number
Line denied
You have selected a line that is private to another telephone.
The destination you have chosen for line redirection is restricted.
Restricted call
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
1 5 2 Common feature displays
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A: Feature Codes
21
The following appendix provides a quick reference for Enterprise Edge features that
are available by pressing the ƒ button. Two tables are provided, one sorted
alphabetically by feature name and the other sorted numerically by feature code.
Features sorted by feature name
Feature name
Activation code
ƒ•⁄
ƒ•¤
ƒ°fl
ƒ£°fl
ƒ•‚
ƒ‡‡
ƒ›
Autodial - External
Autodial - Internal
Background Music
Background Music - Cancel
Button inquiry
Call Duration Timer
Call Forward
Call Forward - Cancel
Call Information
ƒ£›
ƒ°⁄⁄
ƒ°⁄fi
ƒ°⁄‹
ƒ°⁄¤
ƒ•°›
ƒ•°fi
ƒ‡›
ƒ°‚⁄
ƒ°¤
ƒfl°
ƒ‹
Call Log - Delete items
Call Log - Manual
Call Log - View information
Call Log options
Call Log password
Call Park
Call Queuing
Camp-on
Class of Service
Conference Call
Conference Call - Splitting
Contrast adjustment
Current Time & Date
Current Time & Date - Cancel
Dialing Mode
ƒ£‹
ƒ•‡
ƒ°‚fl
ƒ£°‚fl
ƒ•°¤
ƒ‡fl
ƒ°fi
ƒ£°fi
ƒ‡·
ƒ°‚¤
Directed Pickup
Do not Disturb
Do not Disturb - Cancel
Exclusive Hold
Group Listening
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
1 5 4 Appendix A: Feature Codes
Feature name
Activation code
ƒ£°‚¤
ƒ‡fi
ƒ•fi‚⁄
ƒ•fi‚¤
ƒ•fi‚‹
ƒfi
Group Listening - Cancel
Group Pickup
1
Language - English
1
Language - French
1
Language - Spanish
Last Number Redial
Line buttons - Move
Line Pool
ƒ•°⁄
ƒfl›
ƒ°›
ƒ£°›
ƒ‡⁄
ƒ°‚°
ƒ•‹
ƒ⁄
Line Redirection
Line Redirection - Cancel
Link
Long tones
Memory buttons - Program
Messages - Send
Messages - Cancel Send
Messages - View
Name and number blocking
Page
ƒ£⁄
ƒflfi
ƒ°⁄·
ƒfl‚
ƒfl‹
ƒfl¤
ƒfl⁄
ƒ‡°
ƒfl·
ƒ°‹
ƒ•°·
ƒ¤
Page - Combined (internal & external)
Page - External (external speakers)
Page - Internal (telephone speakers)
Pause
Priority Call
Privacy (on/off)
Programmed Release
Ring Again
Ring Again - Cancel
Ring Type
ƒ£¤
ĥfl
ƒ•°‚
ƒ•·
ƒfl‡
ƒ•›
ƒ‚
Ring Volume
Run/Stop
Saved Number Redial
Speed Dial - Add, change
Speed Dial - Make
Test telephone display
Time
ƒ°‚fi
ƒ°‚‹
ƒ‡‚
Transfer
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A: Feature Codes 1 5 5
Feature name
Activation code
Transfer - Cancel
ƒ£‡‚
ƒ°‚‚
ƒ£°‡¤
ƒ°‡¤
ƒ£°‡⁄
ƒ°‡⁄
ƒ£°‡‹
ƒ°‡‹
ƒ°‡‚
ƒflfl
Trunk Answer
Turning Restriction service off
Turning Restriction service on
Turning Ringing service off
Turning Ringing service on
Turning Routing service off
Turning Routing service on
View active services
Voice Call
Voice Call Deny
ƒ°°
Voice Call Deny - Cancel
Wait for dial tone
ƒ£°°
ƒ°‚›
Notes
1
For the Companion C3050 Etiquette and C3050 CT2Plus portable
telephones, enter •• followed by the numeric code to activate this feature.
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
1 5 6 Appendix A: Feature Codes
Features sorted by activation code
Activation code
ƒ‚
Description
Speed Dial - Make
Button inquiry
ƒ•‚
ƒ⁄
Messages - Send
Messages - Cancel Send
Autodial - External
Ring Again
ƒ£⁄
ƒ•⁄
ƒ¤
ƒ£¤
ƒ•¤
ƒ‹
Ring Again - Cancel
Autodial - Internal
Conference Call
Conference Call - Splitting
Memory buttons - Program
Call Forward
ƒ£‹
ƒ•‹
ƒ›
ƒ£›
ƒ•›
ƒfi
Call Forward - Cancel
Speed Dial - Add, change
Last Number Redial
Ring Type
ĥfl
ƒ•‡
ƒ•·
ƒfl‚
ƒfl⁄
ƒfl¤
ƒfl‹
ƒfl›
ƒflfi
ƒflfl
ƒfl‡
ƒfl°
ƒfl·
ƒ‡‚
ƒ£‡‚
ƒ‡⁄
ƒ‡›
ƒ‡fi
ƒ‡fl
ƒ‡‡
Contrast adjustment
Run/Stop
Page
Page - Internal (telephone speakers)
Page - External (external speakers)
Page - Combined (internal & external)
Line Pool
Messages - View
Voice Call
Saved Number Redial
Class of Service
Priority Call
Transfer
Transfer - Cancel
Link
Call Park
Group Pickup
Directed Pickup
Call Duration Timer
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A: Feature Codes 1 5 7
Activation code
Description
Pause
ƒ‡°
ƒ‡·
Exclusive Hold
Ring Volume
Line buttons - Move
Camp-on
ƒ•°‚
ƒ•°⁄
ƒ°¤
ƒ•°¤
ƒ°‹
Dialing Mode
Privacy (on/off)
Line Redirection
ƒ°›
ƒ£°›
ƒ•°›
ƒ°fi
Line Redirection - Cancel
Call Log options
Do not Disturb
ƒ£°fi
ƒ•°fi
ƒ°fl
Do not Disturb - Cancel
Call Log password
Background Music
ƒ£°fl
ƒ°°
Background Music - Cancel
Voice Call Deny
ƒ£°°
ƒ•°·
ƒ•fi‚⁄
ƒ•fi‚¤
ƒ•fi‚‹
ƒ°‚‚
ƒ°‚⁄
ƒ°‚¤
ƒ£°‚¤
ƒ°‚‹
ƒ°‚›
ƒ°‚fi
ƒ°‚fl
ƒ£°‚fl
ƒ°‚°
ƒ°⁄⁄
ƒ°⁄¤
ƒ°⁄‹
ƒ°⁄fi
ƒ°⁄·
Cancel Voice Call Deny
Programmed Release
1
Language - English
1
Language - French
1
Language - Spanish
Trunk Answer
Call Queuing
Group Listening
Group Listening - Cancel
Time
Wait for dial tone
Test telephone display
Current Time & Date
Current Time & Date - Cancel
Long tones
Call Information
Call Log - View information
Call Log - Manual
Call Log - Delete items
Name and number blocking
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
1 5 8 Appendix A: Feature Codes
Activation code
Description
ƒ°‡‚
ƒ°‡⁄
ƒ£°‡⁄
ƒ°‡¤
ƒ£°‡¤
ƒ°‡‹
ƒ£°‡‹
Viewing active services
Turning Ringing service on
Turning Ringing service off
Turning Restriction service on
Turning Restriction service off
Turning Routing service on
Turning Routing service off
Notes
1
For the Companion C3050 Etiquette and C3050 CT2Plus portable
telephones, enter •• followed by the numeric code to activate this feature.
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
22
Conference Calls 37
Group Listening 39
Handsfree 40
hearing aid compatibility 32
prime telephone 30
Privacy 43
Trunk Answer 36
using line buttons 29
using the Release button 32
Voice Call 80
Symbols
2-way DID
PRI 112
apply button cap labels 92
ASM
Long tones 126
Autodial
A
access
Class of Service 130
Enterprise Edge from outside the system 127
external lines 132
remote 129
for M7100 51
line selection 51
programming 51
using a COS 128
storing number on a memory button 51
using intercom line for 52
using Last Number Redial 53
Autodial full 52
using a DISA 128
Access denied 149
ADD 134
administrative programming 13
Alarm 61-4-2 145
alarm codes, reporting and recording 145
alarm telephone 145
Allow calls 110
allow redirect
automatic
Call information 33
Call Log 83
dial 48
Handsfree 42
Hold 57
programming 69
Automatic Call Back, ISDN feature 114
Automatic Call Forward
changing settings 66
Already parked 63
alternate services 117
analog telephone
Automatic Recall
analog telephones
sending messages 75
Analog terminal adaptor
using dialing modes 48
announcement
ISDN terminal feature 115
auxiliary ringer 124
B
Background Music 110
turning off 110
BKSP 134
paging 73
Voice Call 80
Answer button 36
Answer DNs 140
answering calls
busy tone, fast 129
button cap labels 92
applying 92
Answer button 36
Call Display services 32
Call Duration Timer 43
Call Pickup 34
button caps 92
button defaults
CAP 31
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
1 6 0 Index
M7100 telephone 95
getting information for a call on hold 33
M7208 telephone 94
M7310 telephone 94
M7324 telephone 95
Button erased 52
Button Inquiry 89
buttons
getting information for a current call 33
Call Log 83
Autobumping 84
automatic 83
calling from within 85
deleting log items 84
logging a call manually 84
password 86
canceling 86
changing 86
set 83
using 83
Answer button 36
Button Inquiry 89
changing programming 99
dual memory 15
erasing programmed features 91
Feature 15
Call Park 62
Call Pickup
Directed Pickup 34
Group Pickup 35
Call Queuing 58
Handsfree/mute 42
Hold 15
Last Number Redial 53
moving line 95
programming features on 90
Saved Number Redial 56
shift 15
Call(s) bumped 87
Callback 64
Caller ID set 33
using a line button 46
bypassing
Calling 50
calls, switching between 143
Camp denied 61
a Hotline telephone 122
Camp max 61
Camp to 61
Camp-on 61
CANCEL 134
Cancel denied 79
canceling
C
call
overflow 132
ways to make a 45
Call 221? 149
Call blocked 49
Call by Call
PRI 113
a transfer 60
Call Forward 65
Call Display information 32
Call Duration Timer 43
Call Forward
Do Not Disturb 109
Group Listening 40
Line Redirection 69
CAP (central answering position)
answering calls 31
customizing 31
and Line Redirection, differences 71
automatic, changing settings 66
canceling 65
Forward no answer 66
ISDN terminal feature 114
overriding 66
M7324 telephone 31
monitoring calls 31
using 31
to voice mail 67
changing settings
automatic Call Forward 66
Class of Service
using 65
Call information
automatic 33
changing what is shown first 34
displaying information 32
changing 130
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Index 1 6 1
Cleared>LINENAM 79
communicating in the office
sending messages using display 75
Voice Call 80
Companion
dial pad
description 15
dial tone
Enterprise Edge system 129
stuttered 129
Dial voice call 81
dialing
cell
automatic dial 48
modes 48
assignment 138
description 138
options 100
pre-dial 48
neighbors 138
rad neighbor 138
radios 138
saved number 56
signal
Link 125
disabling registration 136
enabling registration 136
re-evaluation 137
Long Tones 126
Pause 126
Programmed Release 126
run/stop 127
switching from pulse to tone 127
Wait for Dial Tone 127
twinning portables 140
Conf. on hold 39
standard dial 48
switching from pulse to tone 127
Conference busy 39
Conference Call
Dialing Plan
by releasing privacy 43
disconnecting from 39
removing yourself from 39
splitting 38
PRI 113
DID (Direct Inward Dial)
template 94
direct inward system access (DISA) 128
direct-dial telephone
programming 122
Directed Call Pickup 143
Directed Pickup 34
disconnect
using the Conference feature 37
contrast adjustment 89
customizing CAP 31
customizing your telephone
adjusting ring volume 96
Button Inquiry 89
from conference 39
releasing a call, accidentally 44
Supervision 131
changing ring type 96
contrast adjustment 89
User Preferences 99
display
D
button equivalents for one-line display 134
Call information 33
contrast 100
date and time
changing 23
displayed instead of messages 97
displaying 44
length of a call 43
making darker or lighter 89
one-line 133
defaults
button assignments 93
deleting
testing 146
time and date 44
Call Log items 84
distinctive rings 96
DND 61
DND from 30
DND transfer 30
messages from list 78
programmed features 91
Denied in admin 149
deregistration of extension numbers on a portable
Do Not Disturb 109
canceling 109
desktop conferencing using ISDN 115
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
1 6 2 Index
using 110
Call Log
DRT 30
dual memory button 15
E
Emergency 911 13
Call Transfer
PRI 112
ending a call 32
Enter code 91
Enter zone 75
Enterprise Edge ATA
Long tones 126
Enterprise Edge system dial tone 129
Enterprise Edge telephones
installing 107
Conference Call
Do Not Disturb
Feature Button
mounting on a wall 108
erasing
Call Log items 85
messages from list 78
programmed features 91
Evening Sched 121
Exchanged 96
Expensive route 45
external
Group Listening
Host System Dialing Signals
Language
access to Enterprise Edge 127
autodial, programming 51
page 73
paging equipment 75
extra-dial telephone 121
F
ƒ
Line Redirection
Autobumping
autodial button
Message
Background Music
Call Forward
Page
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Index 1 6 3
Button Inquiry 89
Call Display 32
Password
Call Duration Timer 43
Call Forward 65
Call Information 32
Call Log 83
Restriction Service
Call Park 62
Ring Again
Call Pickup 34
Call Queuing 58
Call Transfer 59
Callback 64
Camp-on 61
Ringing Service
Routing Service
changing ring type 96
Class of Service password 130
Conference Calls 37
contrast adjustment 89
dialing modes 48
dialing signal
Speed Dial
Testing
Link 125
Long Tones 126
Pause 126
Programmed Release 126
run/stop 127
Wait for Dial Tone 127
Do Not Disturb 109
Do Not Disturb on Busy 67
Exclusive Hold 58
Group Listening 39
Handsfree 40
hiding the message or calls display 97
Hold 57
language choice 90
Last Number Redial 52
line pools 46
Messages 75
moving line buttons 95
one button access 32
priority call 49
Privacy 43
Restriction service 117
Ring Again 50
ring type 96
Ringing service 117
Routing service 117
Saved Number Redial 55
sending messages using analog telephones 75
sending messages using display 75
Set Lock 123
Speed Dial 53
Trunk Answer 36
Voice Call Deny
fast busy tone 129
feature
Voice Call 144
wireless Call Forward No Answer 143
wireless Portable Language Selection 143
Feature button 15
Feature code 91
Feature moved 91
Feature timeout 149
features
adjusting ring volume 96
Autobumping 84
autodial 51
auxiliary ringer 124
Background Music 110
User Preferences 99
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
1 6 4 Index
Voice Call 80
bypassing 122
Voice Call Deny 81
file transfer using ISDN 115
Forward denied 68
setting up the telephone 123
Adding members 102
Assigning lines 103
Forward> 68
Broadcast mode 103
forwarding calls 25
Distribution modes 103
Moving members 102
Call Forward 65
Call Forward delay 66
Call Forward No Answer 66
Call Forward on Busy 67
Do Not Disturb on Busy 67
Programming busy line setting 104
Programming the overflow set 105
Programming the queue time-out 105
Removing members 102
Rotary mode 103
G
Sequential mode 103
Group 4 fax using ISDN applications 115
Group Listening 39
Setting the hunt delay 104
Setting the name 105
canceling 40
Unassigning lines 103
I
H
In use SETNAME 87
Inactive feature 149
incoming call indicator 29
Incoming only 151
indicator
handling many calls at once
Call Queuing 58
Hold 57
handset, speaker testing 147
handset, testing 146
Handsfree
incoming call 29
making calls 40
Handsfree Answerback
programming 42
Voice Call 80
Installer programming 13
Intercom 70
intercom
using as the line for Autodial 52
Intercom # 52
headset
Handsfree requirement 42
testing 147
internal numbers
length of 131
hearing aid compatibility 32
Hidden number 46
Hold
internal page 73
Internet access using ISDN applications 116
Invalid code 55
Invalid location 96
Invalid number 52
Invalid zone 75
automatic 57
button 15
Conference Call 38
exclusive 58
getting information for a call on 33
listening while on hold 57
retrieving call 57
host system signaling
Link 125
ISDN (Integrated Services Digital Network)
description 111
desktop conferencing using 115
file transfer using 115
Group 4 fax using 115
Internet access using 116
LAN access using 115
LAN to LAN bridging using 116
Pause 126
Programmed Release 126
run/stop 127
Wait for Dial Tone 127
Hotline
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Index 1 6 5
telecommuting using 115
using 125
videoconferencing and video telephony using
ISDN PRI 111
Link, programming 125
listening on hold 57
log space
2-way DID 112
programming 86
Call by Call 113
Dialing Plan 113
Emergency 911 112
Name and Number blocking 112
Network Name Display 111
logging a call manually 84
long distance call
indicator 149
using COS password 128
Long Tones 126
L
LAN
lost calls, troubleshooting 142
Lunch Sched 121
access using ISDN applications 115
router 116
M
to LAN bridging ISDN applications 116
Last Number Redial
M7100 telephone
Autodial 51
button defaults 95
Button Inquiry 89
Call Conference 37
Call Park 62
Call Queuing 150
Call Transfer 60
camping a call 61
Conference Call 38
Conference Call on hold 38
Hold 57
programming 53
Last Number Redial, using 52
leased line backup using ISDN applications 115
length of call, timing 43
length of internal numbers 131
limiting
access to Enterprise Edge 128
telephone feature use 123
telephone programming 123
using alternate or scheduled services 117
line
internal numbers 131
line assignment 132
Line button 46
assignment 131
button
line button 29
button, using to choose a line 46
indicators, description 30
line buttons 133
Line Redirection 68
memory buttons 133
one-line display 133
Speed Dial 54
Redirection
canceling 69
standard dial 48
Redirection, and Call Forward, differences
target 132
Transferring a call 60
Voice Call 80
M7208 telephone
button defaults 94
memory buttons 133
M7310 telephone 14
button defaults 94
Conference Call 37
memory buttons 133
splitting a Conference Call 38
troubleshooting 145
M7324 telephone 14
button defaults 95
CAP 31
Line 061 waiting 150
Line hung up 62
Line in use 150
Line Pools, using 142
Line Redirection 70
Line061 callback 30
Line061 hung up 60
Line061 to prime 30
Line061 transfer 150
Link
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
1 6 6 Index
Conference Call 37
No call to park 63
memory buttons 133
splitting a Conference Call 38
troubleshooting 145
No calls waiting 150
No free lines 151
No info to log 88
M7410 CT 21
No last number 53
maintaining security 129
Make calls first 151
making calls
No last number 46
No line to use 70
dialing modes 48
priority call 49
No log assigned 88
No number saved 56
No resume item 88
No services ON 120
No voice call 81
using a line button 46
using line pools 46
using Ring Again 50
with automatic Handsfree 42
Message denied 79
Message list 79
Not available 149
O
OK 134
Message to 79
Messages
canceling a sent message 76
hiding display 97
On hold 58
removing from list 78
sending, using the display 75
viewing 77
one button access to features 32
out of range 141
Outgoing line 70
overflow call routing 132
OVERRIDE 134
Microphone muted 81
monitoring
overriding
with CAP 31
Call Forward 66
line pool status 50
lines (see also Disconnect Supervision) 131
telephone status 50
transferred calls 64
mounting telephones on wall 134
Move line from 96
Move line to 96
P
page
external equipment 75
programming 73
shortcut codes 73
types 73
zones, programming 74
Page choice 75
Page timeout 75
Paging ALL 75
Paging busy 75
Park denied 63
Parked call 150
Parked on 63
parking a call
moving
telephones 109
music, background 110
muting voice call tones 80
N
Name and Number blocking
PRI 112
Network Name Display
PRI 111
New calls begin 87
Night Sched 121
retrieving 62
Parking full 63
password
Call Log 86
canceling 86
changing 86
No call on 63
user preferences 99
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Index 1 6 7
Pause 126
lines
changing the name of a line 108
log space 86
pause in a sequence of numbers (see Wait for Dial
Pickup group 140
Priority Call 140
Set filters 140
Set lock 140
system 14
PBX template 94
Pick up receiver 150
Pickup 35
pickup group 35
Pickup group programming 140
Please wait 49
system features
changing the name of a line 25
Restriction service 117
Ringing service 117
Routing service 117
time and date 23
Pool code 70
portable telephone
twinning 140
voice quality 141
power off, effect on memory buttons 51
power supply, testing 147
pre-dial 48
Press a line 96
telephones
allowing Line Redirection 69
auxiliary ringer 124
Call Display 34
Call Forward delay 66
Call Pickup 34
Press held line 39
prime
changing number of rings before
forwarding call 26
line 123
telephone 30
changing the name of a telephone 108
direct-dial telephones 122
Do Not Disturb 109
Do Not Disturb on Busy 27
external autodial button 51
Forward no answer 66
Forward on busy 67
Handsfree 41
prime line 134
Priority Call
programming 140
Priority denied 49
Priority>223 150
Privacy
changing status 43
private
Handsfree Answerback 42
Hotline 123
branch exchange, accessing from Enterprise
Edge (see also host system dialing signals)
page zone 74
paging 73
priority call 49
Redirect ring 70
call 43
Set lock 123
line 134
programming telephones
Last Number Redial 53
Link 125
Programmed 52
Programmed Release 126
programming
Saved Number Redial 56
basics
Q
administrative programming 13
customizing your Enterprise Edge 13
installer programming 13
starting and ending a session 21
changes, planning 14
features on buttons 90
QUIT 134
R
range 141
redialing
external number 52
Redir by 70
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
1 6 8 Index
Redirect ring
RLS button 32
programming 70
Routing 120
redirection loops, avoiding 72
refusing to answer second call 109
registration
Routing service 117
run/stop signal 127
S
Saved Number Redial
using 55
disabling 136
Saved Number Redial, programming 56
Sched 4 121
Sched 5 121
Sched 6 121
enabling 136
on a portable 139
Release calls 150
Release, using 143
scheduled services 117
security
releasing
recommendations 129
system 128
accidentally 44
from conference 39
remote use
Select line out 71
Select line(s) 71
Send message? 46
Service Modes ON 120
Service provider features
Automatic Call Back 114
Automatic Recall 115
Call Forward 114
Class of Service password 130
security 128
using lines and features from outside the
system 127
replying to a message 77
reporting and recording alarms 145
Restr'n 120
calling the number your calls are forwarded to
restricting
canceling Call Forward 114
Service Schedules
access to Enterprise Edge 128
telephone feature use 123
telephone programming 123
using alternate or scheduled services 117
Restriction service 117
retrieval codes
Evening Sched 121
Lunch Sched 121
Night Sched 121
Sched 4 121
Sched 5 121
Sched 6 121
Call Park 62
retrieving
Services
overriding 120
held call 57
Restriction service 117
Ringing service 117
Routing service 117
Trunk Answer 36
parked call 62
ring
auxiliary ringer 124
changing the number of rings before call is
forwarded 26
ring volume 96
turning off and on using feature codes 119
viewing active schedules 119
Set filters programming 140
set lock 124
Set lock programming 140
Set locked 149
Set profile 133
Ringing service 118
Ring Again 50
Ringing 120
shift button 15
Ringing service 117
SHOW 134
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Index 1 6 9
signal
Link 125
display 146
ending a session 146
handset 146
Long Tones 126
Pause 126
headset 147
Programmed Release 126
run/stop 127
power supply 147
telephone 145
Wait for Dial Tone 127
softkey display prompts, troubleshooting 141
special telephones 121
Speed Dial
telephone speaker 147
Their list full 80
3 parties only 39
time and date
changing User Speed Dial 100
host system signaling codes 54
making a call 54
changing 23
displayed instead of messages and calls 97
displaying 44
programming 23
ƒ°‚fl 79
length of a call 43
time savers
programming for User 54
splitting a Conference Call 38
standard dial 48
autodial 51
Saved Number Redial 55
Speed Dial 53
Start of list 80
Still in trnsfer 61
stopping calls from ringing at your telephone 109
stuttered dial tone 129
switching between calls 143
system
tone
camped call tones 61
controlling length 126
remote access tones 129
voice call 80
tracking incoming calls
Call Log 83
programming 14
system dial tone 129
Transfer denied 61
transferring calls 59
Callback 64
System Speed Dial 53
T
target lines 132
changing the name 108
using to twin 141
telecommuting using ISDN applications 115
telephone
parking a call 62
using Camp-on 61
troubleshooting
decrease in voice quality 141
lost calls 142
alarm 145
reporting and recording alarms 145
softkey display prompts 141
testing
Call Display information 33
changing the name 108
difference between M7310 and M7324
telephones 14
direct-dial 121
Hotline 122
log calls automatically 83
M7100, illustration 133
mounting on wall 134
moving 109
the headset 147
the power supply 147
the speaker in the handset 146
the telephone buttons 146
the telephone display 146
the telephone speaker 147
using the alarm telephone 145
Trunk Answer 36
twinning 140
using Answer DNs 140
using target lines 141
prime 121
prime telephone 30
U
understanding programming 13
Unequipped line 71
testing
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
1 7 0 Index
Unknown name 87
Unknown number 55
W
Wait for Dial Tone 127
wall mounting telephones 134
wireless Call Forward No Answer 144
wireless Portable Language Selection 143
English 143
until * 120
Use line pool? 150
using Call Forward 65
using Do Not Disturb 110
French 144
Spanish 144
Y
V
Your list full 80
videoconferencing and video using ISDN
applications 115
VIEW 134
viewing
active Services 119
Call Log 84
Voice call 81
Voice Call feature 144
voice mail
accessing your Enterprise Edge Voice
Messaging system 88
using Call Forward 67
voice quality 141
volume
bar 134
control 134
Enterprise Edge Feature Programming Telephone Guide
P0908510 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
|