DIGITAL CAMERA
User’s Manual
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Photography and Playback:
Focusing on a Moving Subject in Active Child
i
Download from Www.Somanuals.com. All Manuals Search And Download.
For Your Safety
To prevent damage to your Nikon product or injury to yourself or to others, read
the following safety precautions in their entirety before using this equipment.
Keep these safety instructions where all those who use the product will read them.
The consequences that could result from failure to observe the precautions listed
in this section are indicated by the following symbol:
This icon marks warnings, information that should be read before using this Nikon
product to prevent possible injury.
WARNINGS
Turn off in the Event of
Malfunction
Should you notice smoke or an
Do not use the Camera or AC
Adapter in the Presence of
Flammable Gas
Do not use electronic equipment in
the presence of flammable gas, as this
could result in explosion or fire.
unusual smell coming from the
camera or AC adapter, unplug the AC
adapter and remove the battery
immediately, taking care to avoid
burns. Continued operation could
result in injury. After removing or
disconnecting the power source, take
the equipment to a Nikon-authorized
service representative for inspection.
Handle the Camera Strap with
Care
Never place the strap around the neck
of an infant or child.
Keep out of Reach of Children
Particular care should be taken to
prevent infants from putting the
battery or other small parts into their
mouths.
Do not Disassemble
Touching the internal parts of the
camera or AC adapter could result in
injury. Repairs should be performed
only by qualified technicians. Should
the camera or AC adapter break open
as the result of a fall or other accident,
take the product to a Nikon-authorized
service representative for inspection,
after unplugging the product and/or
removing the battery.
ii
Download from Www.Somanuals.com. All Manuals Search And Download.
For Your Safety
Observe the following
precautions when handling
the battery
• Discontinue use immediately should
you notice any change in the
battery, such as discoloration or
deformation.
• If liquid from the damaged battery
comes in contact with clothing or
skin, rinse immediately with plenty
of water.
The battery may leak or explode if
improperly handled. Observe the
following precautions when handling
the battery for use in this product:
• Before replacing the battery, turn
the product off. If you are using the
AC adapter, be sure it is unplugged.
• Use only a Rechargeable Li-ion
Battery EN-EL12 (supplied). Charge
the battery by inserting it into a
Battery Charger MH-65 (supplied
only with the COOLPIX S610), or by
inserting it into the camera and
connecting the AC Adapter EH-63
(supplied only with the COOLPIX
S610c).
• When inserting the battery, do not
attempt to insert it upside down or
backwards.
• Do not short or disassemble the
battery or attempt to remove or
break the battery insulation or
casing.
• Do not expose the battery to flame
or to excessive heat.
• Do not immerse in or expose to
water.
• Replace the terminal cover when
transporting the battery. Do not
transport or store with metal objects
such as necklaces or hairpins.
• The battery is prone to leakage
when fully discharged. To avoid
damage to the product, be sure to
remove the battery when no charge
remains.
Observe the following
precautions when handling
the battery charger/AC
adapter
• Do not use with travel converters or
adapters designed to convert from
one voltage to another or with DC-
to-AC inverters. Failure to observe
this precaution could damage the
product or cause overheating or fire.
• Keep dry. Failure to observe this
precaution could result in fire or
electric shock.
• Dust on or near the metal parts of
the plug should be removed with a
dry cloth. Continued use could
result in fire.
• Do not handle the power cable or
go near the battery charger/AC
adapter during lightning storms.
Failure to observe this precaution
could result in electric shock.
• Do not damage, modify, forcibly tug
or bend the power cable, place it
under heavy objects, or expose it to
heat or flame. Should the insulation
be damaged and the wires become
exposed, take it to a Nikon-
authorized service representative for
inspection. Failure to observe these
precautions could result in fire or
electric shock.
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
For Your Safety
• Do not handle the plug or battery
charger/AC adapter with wet hands.
Failure to observe this precaution
could result in electric shock.
Do not operate the flash with
the flash window touching a
person or object
Failure to observe this precaution
could result in burns or fire.
Use appropriate cables
When connecting cables to the input
and output jacks, use only the cables
provided or sold by Nikon for the
purpose, to maintain compliance with
product regulations.
Avoid contact with liquid
crystal
Should the monitor break, care should
be taken to avoid injury caused by
broken glass and to prevent liquid
crystal from the monitor touching the
skin or entering the eyes or mouth.
Handle moving parts with
care
Be careful that your fingers or other
objects are not pinched by the lens
cover or other moving parts.
CD-ROMs
The CD-ROMs supplied with this
device should not be played back on
audio CD equipment. Playing CD-
ROMs on an audio CD player could
cause hearing loss or damage the
equipment.
Observe caution when using
the flash
Using the flash close to your subject’s
eyes could cause temporary visual
impairment. Particular care should be
observed if photographing infants,
when the flash should be no less than
one meter (39 in.) from the subject.
iv
Download from Www.Somanuals.com. All Manuals Search And Download.
Notices
• Consult the dealer or an
experienced radio/television
technician for help.
Notice for Customers in the
U.S.A.
Federal Communications
Commission (FCC) Radio
Frequency Interference Statement
COOLPIX S610/S610c
This equipment has been tested and
found to comply with the limits for a
Class B digital device, pursuant to Part
15 of the FCC rules. These limits are
designed to provide reasonable
protection against harmful
interference in a residential installation.
This equipment generates, uses, and
can radiate radio frequency energy
and, if not installed and used in
accordance with the instructions, may
cause harmful interference to radio
communications. However, there is no
guarantee that interference will not
occur in a particular installation. If this
equipment does cause harmful
interference to radio or television
reception, which can be determined
by turning the equipment off and on,
the user is encouraged to try to correct
the interference by one or more of the
following measures:
CAUTIONS
Modifications
The FCC requires the user to be
notified that any changes or
modifications made to this device that
are not expressly approved by Nikon
Corporation may void the user’s
authority to operate the equipment.
Interface Cables
Use the interface cables sold or
provided by Nikon for your equipment.
Using other interface cables may
exceed the limits of Class B Part 15 of
the FCC rules.
Notice for customers in the State of
California
WARNING: Handling the cord on this
product will expose you to lead, a
chemical known to the State of
California to cause birth defects or
other reproductive harm. Wash hands
after handling.
• Reorient or relocate the receiving
antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an
outlet on a circuit different from that
to which the receiver is connected.
Nikon Inc.,
1300 Walt Whitman Road
Melville, New York 11747-3064
USA
Tel: 631-547-4200
v
Download from Www.Somanuals.com. All Manuals Search And Download.
Notices
Notice for customers in Canada
CAUTION
This Class B digital apparatus complies
with Canadian ICES-003.
ATTENTION
Cet appareil numérique de la classe B
est conforme à la norme NMB-003 du
Canada.
Symbol for Separate Collection
in European Countries
This symbol indicates that
this product is to be
collected separately.
The following apply only to
users in European countries:
• This product is designated for
separate collection at an
appropriate collection point. Do not
dispose of as household waste.
• For more information, contact the
retailer or the local authorities in
charge of waste management.
This symbol on the battery
indicates that the battery is
to be collected separately.
The following apply only to
users in European countries:
• This battery is designated for
separate collection at an
appropriate collection point. Do not
dispose of as household waste.
• For more information, contact the
retailer or the local authorities in
charge of waste management.
vi
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
WARNINGS..................................................................................................................................................................ii
Attaching the Camera Strap............................................................................................................................4
The c (shooting/playback) Button...........................................................................................................8
The e (mode) Button..................................................................................................................................8
The d Button....................................................................................................................................................11
Help Displays..........................................................................................................................................................11
First Steps............................................................................................................................................. 12
Charging the Battery Using the Battery Charger (COOLPIX S610).....................................12
Removing the Battery.......................................................................................................................................15
Charging the Battery Using the AC Adapter (COOLPIX S610c)...........................................16
ABasic Photography and Playback: Auto Mode ................................................................. 22
Step 1 Turn the Camera On and Select A(Auto) Mode .......................................................22
Step 3 Focus and Shoot.....................................................................................................................26
Step 4 Viewing and Deleting Pictures..........................................................................................28
Exposure Compensation...................................................................................................................34
vii
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
CShooting in Scene Mode.............................................................................................................35
sFocusing on a Moving Subject in Active Child Mode .................................................... 47
a Automatic Shooting of a Smiling Face................................................................................ 49
Shooting in Smile Mode....................................................................................................................49
c More on Playback....................................................................................................................... 51
Taking a Closer Look: Playback Zoom..........................................................................................52
Creating a Cropped Copy: Crop.................................................................................................................55
Voice Memos: Recording and Playback.......................................................................................57
DMovies ............................................................................................................................................. 61
DSelecting Movie Options..........................................................................................................................62
I Autofocus Mode ...........................................................................................................................................62
Movie Playback.....................................................................................................................................63
EVoice Recordings........................................................................................................................... 64
viii
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Connecting to Televisions, Computers, and Printers........................................................... 69
Connecting to a TV..............................................................................................................................69
Printing Multiple Pictures...............................................................................................................................77
Shooting Options: The Shooting Menu.......................................................................................82
A Image Mode ....................................................................................................................................................83
B White Balance.................................................................................................................................................85
G Metering............................................................................................................................................................87
C Continuous ......................................................................................................................................................88
E ISO Sensitivity..................................................................................................................................................89
F Color Options..................................................................................................................................................89
G AF Area Mode.................................................................................................................................................90
I Autofocus Mode ...........................................................................................................................................93
b Slide Show........................................................................................................................................................97
c Delete...................................................................................................................................................................98
d Protect ...............................................................................................................................................................98
f Rotate Image...................................................................................................................................................99
h Copy..................................................................................................................................................................100
ix
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Displaying the Setup Menu........................................................................................................................102
a Menus...............................................................................................................................................................102
c Welcome Screen........................................................................................................................................103
d Date....................................................................................................................................................................104
e Monitor Settings .......................................................................................................................................107
C Date Imprint..................................................................................................................................................108
g Vibration Reduction.................................................................................................................................109
U Motion Detection......................................................................................................................................110
h AF Assist .........................................................................................................................................................110
u Digital Zoom................................................................................................................................................111
i Sound Settings ...........................................................................................................................................111
k Auto Off...........................................................................................................................................................112
l Format Memory/m Format Card....................................................................................................112
n Language ........................................................................................................................................................113
o Video Mode...................................................................................................................................................113
p Reset All...........................................................................................................................................................113
r Firmware Version ......................................................................................................................................115
Approved Memory Cards............................................................................................................................116
Cleaning .................................................................................................................................................................120
Storage....................................................................................................................................................................120
Error Messages................................................................................................................................... 121
Supported Standards.....................................................................................................................................133
Index...................................................................................................................................................... 134
x
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
About This Manual
Thank you for your purchase of a Nikon COOLPIX S610/S610c digital camera. This
manual was written to help you enjoy taking pictures with your Nikon digital
camera. Read this manual thoroughly before use, and keep it where all those who
use the product will read it.
Symbols and Conventions
To make it easier to find the information you need, the following symbols and
conventions are used:
This icon marks cautions,
This icon marks tips, additional
information that should be read
information that may be helpful
B
C
D
before use to prevent damage to
the camera.
when using the camera.
This icon indicates that more
information is available elsewhere
in this manual or in the Quick Start
Guide.
This icon marks notes, information
that should be read before using
the camera.
A
Notations
• A Secure Digital (SD) memory card is referred to as a “memory card.”
• The setting at the time of purchase is referred to as the “default setting.”
• The names of menu items displayed in the camera monitor, and the names of
buttons or messages displayed in a computer monitor are indicated in bold
text.
Screen Samples
In this manual, images are sometimes omitted from monitor display samples so
that monitor indicators can be more clearly shown.
Illustrations and Screen Display
• In this manual, the COOLPIX S610 digital camera is used for illustrative purposes.
Illustrations for both the COOLPIX S610 and the COOLPIX S610c are provided
when necessary.
• Illustrations and text displays shown in this manual may differ from actual
display.
C Memory Cards
Pictures taken with this camera can be stored in the camera’s internal memory or on removable
memory cards. If a memory card is inserted, all new pictures will be stored on the memory card and
delete, playback, and format operations will apply only to the pictures on the memory card. The
memory card must be removed before the internal memory can be formatted or used to store
pictures to, or delete, or view pictures.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Information and Precautions
Life-Long Learning
As part of Nikon’s “Life-Long Learning” commitment to ongoing product support and education,
continually updated information is available online at the following sites:
• For users in the U.S.A.: http://www.nikonusa.com/
• For users in Europe and Africa: http://www.europe-nikon.com/support/
• For users in Asia, Oceania, and the Middle East: http://www.nikon-asia.com/
Visit these sites to keep up-to-date with the latest product information, tips, answers to frequently
asked questions (FAQs), and general advice on digital imaging and photography. Additional
information may be available from the Nikon representative in your area. See the URL below for
contact information:
http://imaging.nikon.com/
Use Only Nikon Brand Electronic Accessories
Nikon COOLPIX cameras are designed to the highest standards and include complex electronic
circuitry. Only Nikon brand electronic accessories (including battery chargers, batteries and AC
adapters) certified by Nikon specifically for use with this Nikon digital camera are engineered and
proven to operate within the operational and safety requirements of this electronic circuitry.
THE USE OF NON-NIKON ELECTRONIC ACCESSORIES COULD DAMAGE THE CAMERA AND MAY
VOID YOUR NIKON WARRANTY.
The use of third-party rechargeable Li-ion batteries not bearing the Nikon holographic seal could
interfere with normal operation of the camera or result in the batteries overheating, igniting,
rupturing, or leaking.
For more information about Nikon brand accessories, contact a local authorized Nikon dealer.
Rechargeable Li-ion
Battery EN-EL12
Holographic seal:
Identifies this device as an
authentic Nikon product.
Before Taking Important Pictures
Before taking pictures on important occasions (such as at weddings or before taking the camera on
a trip), take a test shot to ensure that the camera is functioning normally. Nikon will not be held liable
for damages or lost profits that may result from product malfunction.
About the Manuals
• No part of the manuals included with this product may be reproduced, transmitted, transcribed,
stored in a retrieval system, or translated into any language in any form, by any means, without
Nikon’s prior written permission.
• Nikon reserves the right to change the specifications of the hardware and software described in
these manuals at any time and without prior notice.
• Nikon will not be held liable for any damages resulting from the use of this product.
• While every effort was made to ensure that the information in these manuals is accurate and
complete, we would appreciate it were you to bring any errors or omissions to the attention of the
Nikon representative in your area (address provided separately).
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Information and Precautions
Notice Concerning Prohibition of Copying or Reproduction
Note that simply being in possession of material that was digitally copied or reproduced by means
of a scanner, digital camera or other device may be punishable by law.
• Items prohibited by law from being copied or reproduced
Do not copy or reproduce paper money, coins, securities, government bonds or local government
bonds, even if such copies or reproductions are stamped “Sample”.
The copying or reproduction of paper money, coins, or securities which are circulated in a foreign
country is prohibited.
Unless the prior permission of the government was obtained, the copying or reproduction of
unused postage stamps or post cards issued by the government is prohibited.
The copying or reproduction of stamps issued by the government and of certified documents
stipulated by law is prohibited.
• Cautions on certain copies and reproductions
The government has issued cautions on copies or reproductions of securities issued by private
companies (shares, bills, checks, gift certificates, etc.), commuter passes or coupon tickets, except
when a minimum of necessary copies are to be provided for business use by a company. Also, do
not copy or reproduce passports issued by the government, licenses issued by public agencies
and private groups, ID cards and tickets, such as passes and meal coupons.
• Comply with copyright notices
The copying or reproduction of copyrighted creative works such as books, music, paintings,
woodcut prints, maps, drawings, movies and photographs is governed by national and
international copyright laws. Do not use this product for the purpose of making illegal copies or to
infringe copyright laws.
Disposing of Data Storage Devices
Please note that deleting images or formatting data storage devices such as memory cards or built-
in camera memory does not completely erase the original image data. Deleted files can sometimes
be recovered from discarded storage devices using commercially available software, potentially
resulting in the malicious use of personal image data. Ensuring the privacy of such data is the user’s
responsibility.
Before discarding a data storage device or transferring ownership to another person, erase all data
using commercial deletion software, or format the device and then completely refill it with images
containing no private information (for example, pictures of empty sky). Be sure to also replace any
to property when physically destroying data storage devices.
If you are using the COOLPIX S610c, reset the wireless LAN settings stored in the camera. For more
information, see page 23 and 37 of the Wireless LAN Connection Guide.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts of the Camera
The Camera Body
1
2 3
4
5
6
10
11
9
8
12
7
Lens cover closed
COOLPIX S610c
1
2
3
9
COOLPIX S610c only
Antenna
10
.... 50 of the Wireless LAN Connection Guide
4
Wireless LAN LED
.... 50 of the Wireless LAN Connection Guide
11
5
6
7
8
Lens cover
F (Picture Mail) button
12
.... 44 of the Wireless LAN Connection Guide
Attaching the Camera Strap
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts of the Camera
1
2
3
4
5
12 13
14 15
6
7 8 9 10 11
16 17
18
1
2
3
Monitor..................................................................6
9
Battery-chamber/
10
15 Connector cover
4
g
5
6
7
8
Tripod socket
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts of the Camera
The Monitor
The following indicators may appear in the monitor during shooting and playback
(actual display varies with current camera settings).
The indicators and photo info displayed during shooting and playback will turn off
Shooting
4
5
6
2
3
1
25
23
7
9
8
24
10
22
11
21
12
1/250 F2.7
1600
20
19
15 14
13
a
999
9999
9m59s
30m00s
b
18
17 16
Shooting mode*
(a) Number of exposures remaining
(still pictures).............................................22
(b) Movie length............................................61
1
13
2
3
4
5
6
7
Vibration reduction/
8
9
Monitor brightness boost indicator .... 23
“Date not set” indicator ......................... 121
Time zone indicator................................. 104
10
12
* Differs according to the current shooting mode. Refer to the sections on each mode for details.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts of the Camera
Playback
1
2
3
4
5
6
7
18
17
16
15
14
13
8
9
10
11
12
999 999
a
9999 9999
9m59s
30m00s
b
1
2
3
4
5
6
Monitor brightness boost indicator .... 23
7
Picture Bank pictures icon
17 (COOLPIX S610c only)
(a) Current frame number/
8
.... 48 of the Wireless LAN Connection Guide
9
* Differs according to the selected option.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Basic Operations
The c (shooting/playback) Button
Press the c button once in shooting mode to enter
playback mode; press again to switch back to shooting
mode.
If the camera is turned off, hold down the c button to
Holding down the c button when the camera is on
sets monitor brightness to the maximum level. Hold
down the c button again to change back to the
original brightness. The b icon will be displayed in the
monitor when monitor brightness is set to the
maximum level.
The e (mode) Button
Use the e button to choose the shooting, playback,
or setup mode.
• Press the e button during shooting to display the
shooting-mode selection menu, or during playback to
display the playback-mode selection menu.
• Press the c button to switch between the mode
selection menu for shooting mode and playback
mode.
• Use the rotary multi selector to choose the desired
mode from the shooting-mode or playback-mode
Shooting-mode Selection Menu
Shooting
1
2
8
7
6
3
4
5
1
2
3
4
5
6
7
8
Setup mode...................................................101
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operations
Playback-mode Selection Menu
COOLPIX S610
COOLPIX S610c
Play
Play
1
1
2
5
4
4
2
3
3
1
2
3
4
5
Setup mode...................................................101
Picture Bank mode
(
COOLPIX S610c only)
.... 47 of the Wireless LAN Connection Guide
The Rotary Multi Selector
This section describes standard uses of the rotary multi selector to select modes,
select menu options, and to apply selection.
For Shooting
Select options*
Display n (self-timer)
Display o (exposure
Apply selection
Flash mode
* Items can also be selected by pressing the rotary multi selector up or down.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operations
For Playback
Select previous picture*
15/11/20008 15:30
0004.JPG
4
4
Select next picture*
* Subsequent or previous pictures can also be selected by rotating the rotary multi selector.
For the Menu Screen
Shooting
1
Select options
Return display to the
previous screen
Apply selection
(advance display to
the next screen)
Shooting menu
Image mode
White balance
Metering
2
Continuous
ISO sensitivity
Exit
1
2
Items can also be selected by pressing the rotary multi selector up or down. Pressing right or left in
C Note on the Rotary Multi Selector
In this manual, up, down, left, and right presses of the rotary multi selector may be indicated with H,
I, J, and K.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operations
The d Button
Press the d button to display the menu for the selected mode. Use the rotary
the menu.
Displayed when
the menu
contains two or
more pages
Shooting menu
Image mode
White balance
Metering
Continuous
Displayed when
there are one or
more menu items
to follow
ISO sensitivity
Exit
The selected option
AF area mode
Face priority
Shooting menu
Color options
AF area mode
Autofocus mode
Displayed when
there are more
previous menu
items
Auto
Manual
Center
Exit
Exit
Press the k button or the
rotary multi selector K to
proceed to the next set of
options.
Press the k button or the
rotary multi selector K to
apply selection.
Help Displays
Press the g (j) button when M is displayed at the lower right of the menu screen
to view a description of the currently selected menu option.
To return to the original menu, press the g (j) button again.
Image mode
Set image quality and size.
Exit
Back
11
Download from Www.Somanuals.com. All Manuals Search And Download.
First Steps
Charging the Battery Using the Battery Charger (COOLPIX S610)
If you are using the COOLPIX S610, charge the Rechargeable Li-ion Battery EN-EL12
(supplied) using the Battery Charger MH-65 (supplied).
• If you are using the COOLPIX S610c, the Battery Charger MH-65 is not supplied
with the camera. Insert the battery into the camera and charge it by connecting
1
Connect the power cable.
Connect the power cable to the battery charger 1 and insert the wall plug into a power
outlet 2. The CHARGE lamp will light to show that the charger is on 3.
2
1
3
2
Charge the battery.
Insert the battery into the battery charger. Slide the
battery forward 1 and then press down until it locks
into place 2.
CHARGE lamp starts blinking 3 when battery is
inserted. Charging is complete when lamp stops
blinking 4.
About 150 minutes are required to charge a fully
exhausted battery.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Charging the Battery Using the Battery Charger (COOLPIX S610)
The following chart explains CHARGE lamp status.
CHARGE lamp
Blinks
Description
Battery charging.
On
Battery fully charged.
The battery is not inserted correctly. Remove the battery and
reinsert it into the battery charger so that the battery is lying flat.
•
Charge the battery indoors with an ambient temperature of
5 °C to 35 °C (41 °F to 95 °F) before use.
Flickers
•
The battery is faulty. Unplug the charger immediately and stop
charging the battery. Bring the battery and charger to a Nikon-
authorized service representative for inspection.
3
Unplug the charger.
Remove the battery and unplug the charger.
B Notes on the Battery Charger
• The supplied battery charger is for use only with a Rechargeable Li-ion Battery EN-EL12. Do not use
with incompatible batteries.
• Be sure to read and follow the warnings for the battery charger on page iii before using the battery
charger.
C Notes on AC Power Supply
• To power the camera continuously for extended periods, use the AC Adapter EH-63 (available
AC adapter. Failure to observe this precaution could result in overheating or in damage to the
camera.
• If you are using the COOLPIX S610, the battery cannot be charged by inserting it into the camera
and connecting the AC adapter. The AC adapter and the supplied audio/video cable or USB cable
cannot be used at the same time.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Inserting the Battery into the Camera
Insert a Rechargeable Li-ion Battery EN-EL12 (supplied) into the camera.
• Charge the battery before the first use or when the battery is running low. For
more information about charging the battery, see “Charging the Battery Using
are using the COOLPIX S610c.
1
Open the battery-chamber/memory card slot
cover.
Slide the cover latch to the Y position 1.
2
Insert the battery.
Confirm that the positive (+) and negative (–) terminals
are oriented correctly as described on the label at the
entrance of the battery chamber, and insert the battery.
Use the battery to push the orange battery latch in the
direction indicated by the arrow 1 and fully insert the
battery 2. When the battery is fully inserted, the battery
latch will lock it in place.
B Inserting the Battery
Inserting the battery upside down or backwards
could damage the camera. Be sure to check the
battery is in the correct orientation.
3
Close the battery-chamber/memory card slot
cover.
Slide the cover latch to the Z position 2.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Inserting the Battery into the Camera
Removing the Battery
Turn the camera off and confirm that the power-on
lamp and the monitor are off before opening the
battery-chamber/memory card slot cover. To eject the
battery, open the battery-chamber/memory card slot
cover and slide the battery latch in the direction shown
1. The battery can then be removed by hand 2.
• Note that the battery may become hot during use;
observe due caution when removing the battery.
Turning On and Off the Camera
To turn on the camera, press the power switch. The
power-on lamp (green) will light for a moment and the
monitor will turn on. To turn off the camera, press the
power switch again.
When the camera turns off, both the power-on lamp
and monitor will turn off.
• If the camera is turned off, hold down the c button to turn the camera on in
B Note on the Battery
• Be sure to read and follow the warnings for the battery on page iii and the section, “The Battery”
• If the battery will not be used for an extended period, recharge it at least once every six months
and run it flat before returning it to storage.
D Auto Power Off in Shooting Mode (Standby Mode)
If no operations are performed for about five seconds in shooting mode, the monitor will dim to
save power. Using any of the camera controls will reactivate the display. If no operations are
performed for about a minute (default setting), the monitor will turn off automatically and the
camera will enter standby mode. If no operations are performed for another three minutes, the
camera will turn off automatically (the auto off function).
If the monitor is off in standby mode, press the power switch or the shutter-release button to
reactivate it.
• The time allowed to elapse before the camera enters standby mode can be changed from the
monitor will not dim, even if no operations are performed.
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Charging the Battery Using the AC Adapter (COOLPIX S610c)
If you are using the COOLPIX S610c, insert a Rechargeable Li-ion Battery EN-EL12
(supplied) into the camera and charge the battery by connecting the AC Adapter
EH-63 (supplied).
2
4
1
3
1
2
Connect the power cable and AC adapter 1.
Confirm that the power-on lamp and the
monitor are off.
Do not turn the camera on. The battery cannot be
charged when the camera is on.
3
4
Connect the AC adapter to the camera’s multi connector 2.
The multi connector should be fully inserted.
Plug the power cable into an outlet 3.
The AC adapter power-on lamp will light 4.
C Charging the Battery After Setting the Camera’s Clock
When the camera’s built-in clock has not been set, the battery begins charging when the AC
adapter is connected. Once the clock is set and the AC adapter is connected, the Picture Bank
start-up screen will be displayed and the camera will attempt to upload pictures to the my
Picturetown server. Press the k button to cancel picture upload and charge the battery.
Picture Bank can be set so that it does not start automatically when the AC adapter is
connected. See the Wireless LAN Connection Guide for more information about Picture Bank.
5
The battery begins charging.
The power-on lamp (orange) will blink, and the battery will
start charging.
The power-on lamp (orange) stops blinking when charging
is complete.
A fully exhausted battery will recharge in about 150 minutes.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Charging the Battery Using the AC Adapter (COOLPIX S610c)
The following chart explains power-on lamp status of the COOLPIX S610c while the AC
adapter is connected.
Power-on lamp
Blinks (orange)
On (orange)
Description
Battery charging.
Battery fully charged.
Off/Blinks (green)/
On (green)
The camera is on. Turn the camera off when charging.
•
•
Charge the battery indoors with an ambient temperature
of 5 °C to 35 °C (41 °F to 95 °F) before use.
If the lamp flickers rapidly, the AC adapter is not correctly
connected or there is a problem with the battery.
Reconnect the AC adapter or replace the battery.
Flickers (orange)
6
Disconnect the camera and AC adapter when charging is complete.
Turn the camera off.
Disconnect the AC adapter from the camera’s multi connector and unplug the power
cable from the power outlet.
C Note on the AC Adapter
• Do not, under any circumstances, use another make or model of AC adapter. Failure to observe
this precaution could result in overheating or in damage to the camera.
• Do not connect the power cable supplied with the AC Adapter EH-63 to any other device.
C The AC Adapter EH-63
The AC Adapter EH-63 (supplied) can:
• When the camera is turned on, power the camera from a power outlet.
• If you are using the COOLPIX S610c, the battery inserted into the camera is charged when the
camera is turned off with the AC adapter connected.
• If you are using the COOLPIX S610, the AC Adapter EH-63 is not supplied with the camera.
Furthermore, the battery cannot be charged while it is inserted into the camera.
• The AC adapter and the supplied audio/video cable or USB cable cannot be used at the same
time.
C The Battery Charger MH-65
Rechargeable Li-ion Battery EN-EL12, is available separately.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Display Language, Date, and Time
A language-selection dialog is displayed the first time the camera is turned on.
1
2
Press the power switch to turn on the camera.
The power-on lamp (green) will light for a moment and
the monitor will turn on.
Use the rotary multi selector to
choose the desired language and
press the k button.
For information about using the rotary multi
selector, see “The Rotary Multi Selector”
3
4
Choose Yes and press the k button.
Date
Set time and date?
If No is selected, the date and time will not be set.
No
Yes
Press the rotary multi selector J or K to select
k button.
w
London
Casablanca
Back
D Daylight Saving Time
If daylight saving time is in effect, press the rotary multi selector H
in the time zone selection screen displayed in step 4 to turn on the
daylight saving time option.
w
London
Casablanca
When the daylight saving time option is enabled, W is displayed at
the top of the monitor. To turn off the daylight saving time option,
press I.
Back
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Display Language, Date, and Time
5
Edit the date.
Date
Rotate the rotary multi selector, or press H or I, to edit
the highlighted item.
D
M
Y
0 1
0 1
2 0 0 8
Press K to move the highlight in the following order.
D (day) ➝ M (month) ➝ Y (year) ➝ hour ➝ minute ➝
DMY (the order in which the day, month, and year are
displayed)
0 0
0 0
Edit
Press J to return to the previous item.
6
Choose the order in which the day, month,
and year are displayed and press the k
button or the rotary multi selector K.
Date
D
M
Y
1 5
1 1
2 0 0 8
The settings are applied and monitor display exits to
shooting mode.
1 5
1 0
Edit
D Changing the Date and Time
and time and follow the procedure described in step 5 above.
• Select Time zone from the Date item in the setup menu to change the time zone and daylight
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Inserting Memory Cards
Image, sound, and movie files are stored in the camera’s internal memory (approx.
If a memory card is inserted in the camera, data are automatically stored on the
memory card and data recorded to the memory card can be played back,
deleted, or transferred. Remove the memory card to store data in the internal
memory, or play back, delete, or transfer data from the internal memory.
1
Confirm the power-on lamp and the monitor
are off and open the battery-chamber/
memory card slot cover.
Be sure to turn off the camera before opening the battery-
chamber/memory card slot cover.
2
Insert the memory card.
Slide the memory card in correctly until it clicks into
place.
Close the battery-chamber/memory card slot cover.
B Inserting Memory Cards
Inserting the memory card upside down or backwards
could damage the camera or the memory card. Make
sure that the memory card is correctly oriented.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Inserting Memory Cards
Removing Memory Cards
Before removing memory cards, turn the camera off
and confirm that the power-on lamp and the monitor
are off. Open the battery-chamber/memory card slot
cover and press the card in 1 to partially eject the card
2. The card can then be removed by hand.
B Formatting Memory Cards
If the message at right is displayed, the memory card must be
deletes all pictures and other data on the memory card. Be
sure to make copies of any pictures you wish to keep before
formatting the memory card.
Card is not formatted.
Format card?
No
Yes
Use the rotary multi selector to choose Yes and press the k button.
A confirmation dialog will be displayed. To start formatting, choose
Format and press the k button.
• Do not turn the camera off or open the battery-chamber/memory card slot cover until
formatting is complete.
• The first time you insert the memory cards used in other devices into this camera, be sure to
Write protect switch
B The Write Protect Switch
Memory cards are equipped with a write protect switch. When
this switch is in the “lock” position, data cannot be written to,
or deleted from, the memory card. If the switch is in the “lock”
position, unlock it by sliding the switch to the “write” position
to record or delete pictures, or to format the memory card.
•
Be sure that the memory card’s write protect switch is in the
“write” position when transmitting pictures from the memory
card to the my Picturetown server using the wireless LAN function built into the COOLPIX S610c
.
B Memory Cards
• Use only Secure Digital memory cards.
• Do not perform the following during formatting, while data are being written to or deleted from
the memory card, or during data transfer to a computer. Failure to observe this precaution could
result in the loss of data or in damage to the camera or memory card:
-
-
-
-
Eject the memory card
Remove the battery
Turn off the camera
Disconnect the AC adapter
• Do not use a computer to format the memory card.
• Do not disassemble or modify.
• Do not drop, bend, or expose to water or strong physical shocks.
• Do not touch the metal terminals with your fingers or metal objects.
• Do not affix labels or stickers to the memory card.
• Do not leave in direct sunlight, closed vehicles, or areas exposed to high temperatures.
• Do not expose to humidity, dust, or to corrosive gases.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Photography and Playback: Auto Mode
Step 1 Turn the Camera On and Select
A
(Auto) Mode
This section describes how to take pictures in A(auto) mode, an automatic,
“point-and-shoot” mode recommended for first-time users of digital cameras.
1
2
3
Press the power switch to turn on the camera.
The power-on lamp (green) will light for a moment and
the monitor will turn on. The lens will also extend.
Proceed to step 4 when A is displayed.
Press the e button.
Use the rotary multi selector to choose Aand
press the k button.
Shooting
The camera enters A(auto) mode.
Battery level indicator
4
Check the battery level and number of
exposures remaining in the monitor.
Battery level
Monitor
Description
NO INDICATOR Battery fully charged.
16
Battery low; prepare to charge or
replace the battery.
B
Number of exposures
remaining
N
Cannot shoot. Recharge or
replace with a fully charged
battery.
Battery
exhausted.
Number of Exposures Remaining
The number of pictures that can be stored depends on the capacity of the internal
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 1 Turn the Camera On and Select A(Auto) Mode
Indicators Displayed in A(Auto) Mode
Shooting mode
A displayed in A
(auto) mode
Vibration reduction/Motion
detection icon
When s is displayed in the
monitor, the effects of the
camera shake and subject
movement are reduced.
16
Image mode
Internal memory indicator
The combination of image size and
image quality (compression) is displayed.
The default setting is i Normal
(3,648 × 2,736).
Pictures will be recorded to internal
memory (approx. 45 MB). When memory
card is inserted, C is not displayed and
pictures will be recorded to memory card.
The indicators and photo info displayed during shooting and playback will turn off
save power, press the power switch or the shutter-release button to reactivate it
C Monitor Brightness Boost
If it is difficult to see the monitor display when shooting outdoors, holding down the c button
while the power is on to switch monitor brightness to the maximum setting. Hold down the c
button again to change back to the original brightness. The b icon will be displayed in the monitor
when the brightness setting is set to the maximum by pressing the c button.
D Functions Available in A(Auto) Mode
D Vibration Reduction and Motion Detection Icons
The Vibration reduction option effectively reduces blur, caused by slight hand movement known
as camera shake, that commonly occurs when shooting with zoom applied or at slow shutter
speeds.
The Motion detection option detects camera shake and subject movement with shooting, and
increases the shutter speed to reduce their effects. Motion detection does not function when
recording movies.
The Vibration reduction/Motion detection icons indicate the following:
• q: The Vibration reduction option is set to On, and the Motion detection option is set to Off.
r: The Motion detection option is set to Auto, and the Vibration reduction option is set to
Off.
• Off: Both the Vibration reduction and Motion detection options are set to Off.
• Set Vibration reduction to Off when using a tripod to stabilize the camera during shooting.
Download from Www.Somanuals.com. All Manuals Search And Download.
23
Step 2 Frame a Picture
1
Ready the camera.
Hold the camera steadily in both hands, keeping your
fingers and other objects away from the lens, flash, AF-
assist illuminator, microphone, and speaker.
2
Frame the picture.
Position the main subject near the center of the monitor.
16
Using the Zoom
Use the zoom buttons to activate optical zoom. Press
the g button to zoom in so that the subject fills a
larger area of the frame, or the f button to zoom out,
increasing the area visible in the frame.
Zoom out
Zoom in
A zoom indicator is displayed at the top of the
monitor when the zoom button is pressed.
Optical zoom
Digital zoom
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 2 Frame a Picture
Digital Zoom
When the camera is zoomed in to the maximum optical zoom position, holding
down the g button triggers digital zoom. The subject is magnified up to 4× the
maximum optical zoom ratio.
When digital zoom is in effect, the focus area will not be displayed and the camera
will focus on the subject in the center focus area.
Optical zoom (up to 4×).
Digital zoom is in effect.
C Digital Zoom and Interpolation
Unlike optical zoom, digital zoom uses a digital imaging process known as interpolation to magnify
images, resulting in slight deterioration of picture quality.
Interpolation is applied at zoom positions beyond V. When zoom is increased beyond the V
position, interpolation is initiated and the zoom indicator turns yellow to indicate that interpolation
is being applied. The position of V moves to the right as image size decreases, allowing for
confirmation of the zoom positions at which shooting without interpolation is possible at the
current image mode setting.
When an image size is small
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 3 Focus and Shoot
1
Press the shutter-release button halfway.
Camera automatically selects the focus area (one of nine)
containing the subject closest to the camera. When the
subject is in focus, the active focus area glows green.
16
1/250 F2.7
Shutter Aperture
Speed
When digital zoom is in effect, the focus area is not displayed. When the camera focuses
Press the shutter-release button halfway to display the shutter speed and aperture.
Focus and exposure remain locked while the shutter-release button is pressed halfway.
When the camera is unable to focus, while the shutter-release button is pressed halfway,
the focus area or focus indicator blinks red. Change the composition and try again.
2
Press the shutter-release button the rest of
the way down.
The shutter will be released, and the picture will be
recorded to the memory card or internal memory.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 3 Focus and Shoot
B During Recording
While pictures are being recorded, the number of exposures remaining display will blink. Do not
open the battery-chamber/memory card slot cover while pictures are being recorded. Cutting
power or removing the memory card in these circumstances could result in loss of data or in
damage to the camera or card.
C Autofocus
Autofocus may not perform as expected in the following situations. In some rare cases, the subject
may not be in focus despite the fact that the active focus area, or focus indicator, glows green:
• Subject is very dark
• Objects of sharply differing brightness are included in the scene (e.g., the sun is behind the subject
and is in deep shadow)
• No contrast between the subject and surroundings (e.g., when the subject is standing in front of a
white wall, wearing a white shirt)
• Several objects are at different distances from the camera (e.g., the subject is inside a cage)
• Subject is moving rapidly
In the situations noted above, try pressing the shutter-release button halfway to refocus several
the distance between the camera and the subject with which focus was locked is the same as that
for the actual subject.
D Shutter-Release Button
The camera features a two-stage shutter-release button. To set focus and exposure, press the
shutter-release button halfway, stopping when you feel resistance. Focus and exposure lock while
the shutter-release button is held in this position. To release the shutter and take a picture, press the
shutter-release button the rest of the way down.
Do not use force when pressing the shutter-release button, as this may result in camera shake and
blurred pictures.
Press the shutter-
release button
halfway to set
focus and
Press the shutter-
release button
the rest of the
way down to
exposure.
take a picture.
D AF-assist Illuminator and Flash
If the subject is poorly lit, the AF-assist illuminator (A 110) may light by pressing the shutter-release
button halfway, or the flash (A 30) may fire by pressing the shutter-release button all the way down.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 4 Viewing and Deleting Pictures
Viewing Pictures (Playback Mode)
Press the c button.
The last picture taken will be displayed in full-frame
playback mode.
Rotate the rotary multi selector, or press H, I, J, or
Pictures may be displayed briefly at low resolution while being read from the memory card or
internal memory.
Press the c button to switch to shooting mode.
When C is displayed, pictures stored in the internal memory
15/11/22008 15:30
will be displayed. When memory card is inserted, C is not
displayed and pictures stored on the memory card will be
displayed.
0004.JPG
4
4
Internal memory
indicator
Deleting Pictures
1
Press the l button to delete the
picture currently displayed in the
monitor.
2
Use the rotary multi
selector to select Yes
Erase 1 image?
Done
and press the k
button.
No
Yes
To exit without deleting the
picture, select No and press
the k button.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 4 Viewing and Deleting Pictures
C Options Available in Playback Mode
The following options are available in full-frame playback mode.
Option
Use
Description
A
Press the g (i) button to enlarge view of picture
currently displayed, up to about 10×. Press the k
button to return to full-frame playback mode.
Playback zoom
g (i)
Press the f (h) button to display 9, 16, or 25
View thumbnails
f (h)
k
picture thumbnails.
Record/play voice
memo
Press the k button to record or play back voice
memos up to 20 seconds in length.
Switch to shooting
mode
Press the c button to switch to the shooting mode
selected in the shooting-mode selection menu.
c
C Pressing the c Button to Turn On the Camera
• When the camera is off, holding down the c button will turn the camera on in playback mode.
The lens will not extend.
pressing the c button will turn the camera on in sound file playback mode.
C Viewing Pictures
• Pictures stored in the internal memory can only be viewed if no memory card is inserted.
playback, the pictures may be automatically rotated for playback display, depending upon the
orientation of the detected face.
• When the monitor has turned off in standby mode to save power, press the power switch or the
C Deleting the Last Picture Taken
In shooting mode, press the l button to delete the last picture
taken.
Erase 1 image?
No
Yes
D Deleting Multiple Pictures
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Flash
The flash has a range of about 0.5–8.0 m (1.6–26.2 ft.) when the camera is zoomed
out all the way. With maximum optical zoom applied, the range is about 0.5–3.5 m
(1.6–11.4 ft.) (when ISO sensitivity is set to Auto). The following flash modes are
available.
U
V
W
Auto
Flash fires automatically when lighting is poor.
Auto with red-eye reduction
Off
Flash will not fire even when lighting is poor.
Fill flash
X
Flash fires when a picture is taken. Use to “fill-in” (illuminate) shadows and backlit
subjects.
Y
Slow sync
U(auto) is combined with slow shutter speed.
Flash illuminates main subject; slow shutter speeds are used to capture
background at night or under dim light.
Setting the Flash Mode
1
Press X(flash mode).
The flash mode menu is displayed.
2
Use the rotary multi selector to choose the
desired flash mode and press the k button.
The icon for the selected flash mode is displayed at the
top of the monitor.
D will disappear after a few seconds, regardless of the
Flash mode
If a setting is not applied by pressing the k button
within a few seconds, the selection will be cancelled.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Flash
B Shooting When Lighting is Poor and the Flash is Disabled (W)
• Use of a tripod is recommended to stabilize the camera during shooting and avoid the effects of
• The E indicator is displayed when the camera automatically increases sensitivity. Pictures taken
when E is displayed may be slightly mottled.
• When E is displayed and higher sensitivity is applied, noise reduction may be automatically
applied as pictures taken are recorded; results in increased recording times.
B Note on Using the Flash
When using the flash, reflections from dust particles in the air may appear as bright spots in pictures.
To reduce these reflections, set the flash mode to W(Off).
C The Flash Lamp
The flash lamp indicates flash status when the shutter-
release button is pressed halfway.
• On: Flash will fire when picture is taken.
• Blinks: Flash charging. Wait a few seconds and try
again.
• Off: Flash will not fire when picture is taken.
If the battery is low, the monitor display will turn off, and remain off, until the flash is fully charged.
C The Flash Mode Setting
The default flash mode setting varies with shooting mode.
• A(auto) mode: UAuto
• x(scene auto selector): UAuto. The camera selects the flash mode depending upon the
• s(active child): WOff
• a (smile): UAuto
The flash mode setting applied in A(auto) mode is stored in the camera’s memory even after the
camera is turned off, and reapplied the next time A(auto) mode is selected.
C Red-Eye Reduction
This camera uses advanced red-eye reduction (“In-Camera Red-Eye Fix”). The flash fires repeatedly at
low intensity before the main flash, reducing red-eye. The camera then analyzes the picture; if red-
eye is detected, the affected area will be processed to further reduce red-eye before the picture is
saved. Note that because there is a slight lag between the shutter-release button being pressed and
the picture being shot, this mode is not recommended when a quick shutter response is required.
The time before the next picture can be shot also increases slightly. Advanced red-eye reduction
may not produce the desired results in all situations. In extremely rare instances, areas not subject to
red-eye may be affected by advanced red-eye reduction processing; in these cases, choose another
mode and try again.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Taking Pictures with the Self-Timer
The camera is equipped with a ten-second and two-second timer for self-portraits.
When using the self-timer, use of a tripod is recommended. Turn vibration
1
Press n (self-timer).
The self-timer menu is displayed.
2
Use the rotary multi selector to choose 10s or
2s and press the k button.
10s
2s
10s (ten seconds): suited for important occasions (such
as weddings)
2s (two seconds): suited for preventing camera shake
Self-timer
The mode selected for self-timer is displayed.
If a setting is not applied by pressing the k button within a few seconds, the selection
will be cancelled.
3
4
Frame the picture and press the
shutter-release button halfway.
Focus and exposure will be set.
1/250 F2.7
Press the shutter-release button the
rest of the way down.
9
The self-timer starts and the number of seconds
remaining until the shutter is released is
displayed in the monitor. The self-timer lamp
will blink. The lamp stops blinking one second
before the picture is taken and remains lit until
the shutter is released.
1/250 F2.7
When the shutter is released, the self-timer
turns off.
To stop the timer before a picture is taken, press
the shutter-release button again.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Macro Mode
Macro mode is used for taking pictures of objects as close as 3 cm (1.2 in.). Note
that the flash may be unable to light entire subject at distances of less than 50 cm
(1 ft. 8 in.).
1
Press p (macro mode).
The macro mode menu is displayed.
2
Use the rotary multi selector to choose ON
and press the k button.
The macro mode icon (F) is displayed.
If a setting is not applied by pressing the k button
within a few seconds, the selection will be cancelled.
Macro mode
3
Press the g (i) button or the f (h) button
to frame the picture.
The camera can focus at a distance of 3 cm (1.2 in.) at the
zoom position at which F and the zoom indicator glow
green (the zoom indicator is before G).
C Macro Mode
automatically set to Full-time AF.
- Beach/snow
- Close-up (the macro mode setting is fixed at ON)
- Food (the macro mode setting is fixed at ON)
- Museum
- Copy
- Panorama assist
• In Full-time AF, the camera automatically focuses continuously until focus and exposure are
locked by pressing the shutter-release button halfway.
C The Macro Mode Setting
The macro mode setting applied in A(auto) mode is stored in the camera’s memory even after the
camera is turned off, and reapplied the next time A(auto) mode is selected.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Exposure Compensation
Exposure compensation is used to alter exposure from the value suggested by the
camera to make pictures brighter or darker.
1
2
Press o (exposure compensation).
The exposure compensation guide is displayed.
Use the rotary multi selector to adjust
exposure and press the k button.
•
•
•
•
When the subject is too dark: adjust the exposure
compensation to “+” side.
When the subject is too bright: adjust the exposure
compensation to “–” side.
Exposure compensation
Exposure compensation can be set to values between
–2.0 and +2.0 EV.
If a setting is not applied by pressing the k button within a few seconds, the
selection will be cancelled.
3
The setting is applied.
The value is displayed with the H icon in the monitor.
16
C Exposure Compensation Value
The exposure compensation value applied in A(auto) mode is stored in the camera’s memory even
after the camera is turned off, and reapplied the next time A(auto) mode is selected.
D Using Exposure Compensation
The camera tends to lower exposure when the frame is dominated by brightly lit objects and to
increase exposure when the frame is mostly dark. Positive compensation may therefore be required
to capture the brilliancy of very bright objects that fill the frame (for example, sunlit expanses of
water, sand, or snow) or when the background is much brighter than the main subject. Negative
compensation may be called for when large areas of the frame contain very dark objects (for
example, a swath of dark green leaves) or when the background is much darker than the main
subject.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting Suited for the Scene
Shooting in Scene Mode
Camera settings are automatically optimized for the selected subject type. The
following scene modes are available.
bPortrait
fParty/indoor
gBeach/snow
hSunset
jNight landscape mFireworks show
cLandscape
dSports
kClose-up
u Food
nCopy
oBacklight
pPanorama assist
eNight portrait
iDusk/dawn
lMuseum
Setting the Scene Mode
1
2
3
Enter scene mode by pressing the
e button in shooting mode,
selecting C(use the rotary multi
selector), and then pressing the k
button.
Scene
Press the d button to display the
scene menu screen, and choose the
desired scene and press the k
button.
Scene menu
Beach/snow
Sunset
Dusk/dawn
Night landscape
Close-up
Exit
Frame the subject and take the
picture.
1/250 F2.7
C Image Mode
Scene menu
to the image mode setting apply to all shooting modes (except
those available from the movie menu).
p
Panorama assist
Image mode
Exit
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting in Scene Mode
Features
bPortrait
Q
Use this mode for portraits in which the main subject stands
out clearly. Portrait subjects exhibit smooth, natural-looking
skin tones.
•
The camera detects and focuses on a face looking toward
If the camera detects multiple faces, the camera focuses on
the face closest to the camera.
•
•
•
If no face is recognized, the camera will focus on the subject in center of frame.
Digital zoom is not available.
X
V*
n
Off*
p
Off
o
0.0*
* Other settings can be selected.
cLandscape
Q
Use this mode for vivid landscapes and cityscapes.
•
Camera focuses at infinity. When the shutter-release button
always lights green; however, focus may not be set for near
subjects, while the camera focuses at infinity.
The AF-assist illuminator does not light, regardless of the AF
•
X
W
n
Off*
p
Off
o
0.0*
* Other settings can be selected.
dSports
Use this mode for dynamic action shots that freeze the action
in a single shot and record motion in a series of pictures.
•
The camera focuses continuously until focus is locked by
pressing the shutter-release button halfway.
•
While the shutter-release button is held down, pictures are
taken at rate of up to about 1.0 frames per second (fps) when image mode is set to i
Normal (3648). Shooting ends when the shutter-release button is released, or ten shots
have been taken with the shutter-release button held down.
•
•
The maximum frame rate with continuous shooting may vary depending upon the
current image mode setting and the memory card used.
X
W
n
Off
p
Off
o
0.0*
* Other settings can be selected.
Q: Pictures taken in scene modes utilizing Q may be processed to reduce noise and
therefore take longer to record.
C Icons Used for Descriptions
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting in Scene Mode
eNight portrait
OQ
Use this mode to achieve a natural balance between the main
subject and background lighting in portraits taken at night.
•
The camera detects and focuses on a face looking toward
If the camera detects multiple faces, the camera focuses on
the face closest to the camera.
•
•
•
If no face is recognized, the camera will focus on the subject in center of frame.
Digital zoom is not available.
1
2
2
X
V
n
Off
p
Off
o
0.0
1
2
Fill flash with slow sync and red-eye reduction.
Other settings can be selected.
fParty/indoor
Q
Captures the effects of candlelight and other indoor
background lighting.
•
•
Camera focuses on subject in center of frame.
Hold the camera steadily as pictures are easily affected by
camera shake. When shooting under low lighting, use of a
to Off when using a tripod.
1
2
2
X
V
n
Off
p
Off
o
0.0
1
2
Fill flash with slow sync and red-eye reduction. Other settings can be selected.
Other settings can be selected.
gBeach/snow
Q
Captures the brightness of such subjects as snowfields,
beaches, or sunlit expanses of water.
•
Camera focuses on subject in center of frame.
X
U*
n
Off*
p
Off*
o
0.0*
* Other settings can be selected.
O: For those scene modes with O, use of a tripod is recommended. Set Vibration
Q: Pictures taken in scene modes utilizing Q may be processed to reduce noise and
therefore take longer to record.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting in Scene Mode
hSunset
OQ
Preserves the deep hues seen in sunsets and sunrises.
•
Camera focuses at infinity. When the shutter-release button
always lights green; however, focus may not be set for near
subjects, while the camera focuses at infinity.
The AF-assist illuminator does not light, regardless of the AF
•
X
W
n
Off*
p
Off
o
0.0*
* Other settings can be selected.
iDusk/dawn
OQ
Preserves the colors seen in the weak natural light before
sunrise or after sunset.
•
Camera focuses at infinity. When the shutter-release button
always lights green; however, focus may not be set for near
subjects, while the camera focuses at infinity.
•
X
W
n
Off*
p
Off
o
0.0*
* Other settings can be selected.
jNight landscape
OQ
Slow shutter speeds are used to produce stunning night
landscapes.
•
Camera focuses at infinity. When the shutter-release button
always lights green; however, focus may not be set for near
subjects, while the camera focuses at infinity.
•
X
W
n
Off* Off 0.0*
p
o
* Other settings can be selected.
O: For those scene modes with O, use of a tripod is recommended. Set Vibration
Q: Pictures taken in scene modes utilizing Q may be processed to reduce noise and
therefore take longer to record.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting in Scene Mode
kClose-up
Q
Photograph flowers, insects, and other small objects at close
range.
•
automatically zooms to the position at the closest distance at
which the camera can focus.
The camera can focus at distances as close as 3 cm (1.2 in.)
at the wide-angle zoom position at which F glows green
•
(the zoom indicator is before G). The closest distance at which the camera can focus
varies depending upon zoom position.
•
•
•
which focus is acquired.
The camera focuses continuously until focus is locked by pressing the shutter-release
button halfway.
X
W*
n
Off*
p
On
o
0.0*
* Other settings can be selected. Note that when shooting with the flash, the flash may be
unable to light entire subject at distances of less than 50 cm (1 ft. 8 in.)
uFood
Q
Use when taking pictures of food. See “Taking Pictures in Food
•
to choose the focus area in which focus is acquired.
X
W
n
Off*
p
On
o
0.0*
* Other settings can be selected.
lMuseum
Use indoors where flash photography is prohibited (for
example, in museums and art galleries) or in other settings in
which you do not want to use the flash.
•
•
•
Camera focuses on subject in center of frame.
As pictures are easily affected by camera shake, check the
•
X
W
n
Off* Off* 0.0*
p
o
* Other settings can be selected.
Q: Pictures taken in scene modes utilizing Q may be processed to reduce noise and
therefore take longer to record.
Download from Www.Somanuals.com. All Manuals Search And Download.
39
Shooting in Scene Mode
mFireworks show
O
Slow shutter speeds are used to capture the expanding burst
of light from a firework.
•
Camera focuses at infinity. When the shutter-release button
however, focus may not be set for near subjects, while the
camera focuses at infinity.
•
•
X
W
n
Off
p
Off
o
0.0
nCopy
Q
Provides clear pictures of text or drawings on a white board or
in print.
•
•
•
Camera focuses on subject in center of frame.
Colored text and drawings may not show up well.
X
W*
n
Off*
p
Off*
o
0.0*
* Other settings can be selected.
oBacklight
Use when light is coming from behind your subject, throwing
features or details in shadow. The flash fires automatically to
“fill in” (illuminate) shadows.
•
Camera focuses on subject in center of frame.
X
X
n
Off*
p
Off
o
0.0*
* Other settings can be selected.
O: For those scene modes with O, use of a tripod is recommended. Set Vibration
Q: Pictures taken in scene modes utilizing Q may be processed to reduce noise and
therefore take longer to record.
Download from Www.Somanuals.com. All Manuals Search And Download.
40
Shooting in Scene Mode
pPanorama assist
Q
Use when taking a series of pictures that will later be joined to form a single panorama using
details.
m
W*
n
Off*
p
Off*
o
0.0*
* Other settings can be selected.
Taking Pictures in Food Mode
Use this mode to take pictures of food.
1
Use the rotary multi selector to choose
uFood in the scene menu and press the k
Scene menu
Food
Museum
Fireworks show
Copy
Backlight
Exit
automatically zooms to the position at the closest
distance at which the camera can focus.
2
Press the rotary multi selector H or I to
choose white balance.
•
Press H to increase the amount of red, or I to increase
the amount of blue.
16
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting in Scene Mode
3
Frame the picture.
•
The camera can focus at distances as close as 3 cm
(1.2 in.) at the wide-angle zoom position at which F
and the zoom indicator glow green (the zoom
indicator is before G). The closest distance at which
the camera can focus varies depending upon zoom
position.
•
•
As pictures are easily affected by camera shake, check
Press the rotary multi selector H, I, J, or K to select a focus area and press the k
button again to activate the selected focus area.
•
settings can be adjusted while the focus area is locked.
16
4
Press the shutter-release button to take the
picture.
•
Focus is locked when the shutter-release button is
pressed halfway, and a picture is taken when the
shutter-release button is pressed the rest of the way
down.
1/60
F2.7
•
When the camera is unable to focus, the focus area
blinks red. Change the composition and press the shutter-release button halfway
again.
B Notes on Food Mode
C White Balance Setting in Food Mode
• Increasing the amount of red or blue will decrease illumination effects.
• The white balance setting applied in food mode is stored in the camera’s memory even after the
camera is turned off, and reapplied the next time food mode is selected.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting in Scene Mode
Taking Pictures for a Panorama
The camera focuses on the subject in the center of frame. Use a tripod for best
the camera during shooting.
1
Use the rotary multi selector to choose p
Panorama assist in the scene menu and
Scene menu
Panorama assist
Image mode
•
The (I) icon is displayed to show the direction in which
pictures will be joined.
Exit
2
Use the rotary multi selector to choose the
direction and press the k button.
•
Select how pictures will be joined together in the
completed panorama; right (I), left (J), up (K) or
down (L).
•
The yellow panorama direction icon (II) will move to
the direction pressed and press the k button to
16
choose the direction. A white panorama direction icon (I) will be displayed in the
chosen direction.
•
•
Press the k button to reselect the direction.
3
4
Shoot the first picture.
•
The picture taken will be displayed in 1/3 of
the monitor.
1/250 F2.7
Shoot the second picture.
•
Compose the next picture so that it overlaps
the first picture.
•
Repeat until you have taken the necessary
number of pictures to complete the scene.
End
15
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting in Scene Mode
5
Press the k button when shooting is
completed.
The camera returns to step 2.
End
12
B Panorama Assist
Flash mode, self-timer, macro mode and exposure compensation settings cannot be adjusted after
the first picture is taken. Pictures cannot be deleted, nor can zoom or image mode setting (A 83) be
adjusted until the series is finalized.
The panorama series is terminated if the camera enters standby mode with the auto off function
to a longer setting is recommended.
D The R Indicator
R is displayed to indicate that white balance, exposure, and
focus have been locked at the values set with the first shot. All
pictures taken in a panorama series have the same focus, exposure,
and white-balance settings.
End
15
D Image File Names and Folder Names
Files are stored in folders named with a folder number followed by “P_” plus a three-digit sequence
number for pictures taken using panorama assist (e.g., “101P_001”). File numbers will be assigned
automatically starting with “0001”.
D Panorama Maker
Install Panorama Maker from the supplied Software Suite CD-ROM. Transfer pictures to a computer
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting in the Scene Mode Selected by the Camera (Scene Auto Selector)
By simply framing a picture, the camera automatically selects the optimum scene
mode for simpler shooting.
When the camera is aimed at a subject in xscene auto selector mode, the
camera automatically selects one of the following scene modes:
•
•
•
•
•
•
•
For more information regarding details of these scene modes, see the reference
pages indicated above.
Taking Pictures in Scene Auto Selector Mode
1
Enter scene auto selector mode by
pressing the e button in
shooting mode, selecting x(use
the rotary multi selector), and then
pressing the k button.
Scene auto selector
The camera enters scene auto selector
mode.
2
Frame the subject and take the picture.
When the camera automatically selects a scene mode,
the shooting mode icon changes to that for the scene
mode currently enabled.
d: Auto
g: Night landscape
i: Close-up
16
e: Portrait
f: Landscape
h: Night portrait
j: Backlight
Press the shutter-release button halfway to set focus and exposure.
Press the shutter-release button the rest of the way down to take the picture.
B Notes on Scene Auto Selector Mode
Depending upon shooting conditions, the camera may not select the desired scene mode. Should
Download from Www.Somanuals.com. All Manuals Search And Download.
45
Shooting in the Scene Mode Selected by the Camera (Scene Auto Selector)
C Flash Mode in Scene Auto Selector Mode
• When U(Auto) is applied, the camera automatically selects the optimum flash mode setting
for the scene mode it has selected.
• When W(Off) is applied, the flash does not fire, regardless of shooting conditions.
C Functions Restricted in Scene Auto Selector Mode
• When the d button is pressed in scene auto selector mode, only the Image mode menu is
displayed. Changes made to the image mode setting in this mode apply to all shooting modes
(except those available from the movie menu).
• Digital zoom is not available.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Focusing on a Moving Subject in Active Child Mode
Active Child Mode
Use this mode to shoot moving subjects. Once the subject has been selected, the
focus area will automatically follow the subject.
1
Enter active child mode by pressing
the e button in shooting mode,
selecting s(use the rotary multi
selector), and then pressing the k
button.
Active child
•
A white border is displayed in the center of
the monitor.
•
2
Select a subject.
•
Frame the subject in the center of the border and press
the k button.
- The subject is selected and will be framed by a yellow
double border.
- When the camera is unable to focus on the subject,
the single border will glow red. Change the
composition and try again.
Start
•
Once the selected subject is not visible on the monitor,
the double border will disappear and the selection will
be cancelled. Select the subject again.
3
4
Press the shutter-release button halfway.
•
•
•
The camera focuses on the focus area framed by the
double border. The double border will glow green and
focus will be locked.
When the camera is unable to focus, the double border
will blink. Press the shutter-release button halfway
again and focus.
1/250 F2.7
If the shutter-release button is pressed halfway while the double border is not
displayed, the camera focuses on the subject at the center of the frame.
Press the shutter-release button the rest of the
way down.
•
The picture will be recorded to the memory card or
internal memory.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Active Child Mode
B Active Child Mode
• Do not adjust flash mode and exposure compensation settings after selecting the subject. If any
setting is adjusted after selection of the subject, the selection of the subject will be cancelled.
the subject.
• In some situations, such as when the subject is moving rapidly, the camera may be unable to track
the selected subject.
the subject may not be in focus despite the fact that the double border glows green. Should this
occur, switch to A(auto) mode and set AF area mode to Manual or Center, refocus on another
subject positioned at the same distance from the camera as the actual portrait subject, and use
C Functions Available in Active Child Mode
• Digital zoom is not available.
displayed. Changes made to the image mode setting in this mode apply to all shooting modes
(except those available from the movie menu).
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Automatic Shooting of a Smiling Face
Shooting in Smile Mode
The camera detects a smiling face to shoot the face automatically.
1
Enter smile mode by pressing the
e button in shooting mode,
selecting a (use the rotary multi
selector), and then pressing the k
button.
Smile
2
Frame a picture.
•
Point the camera at the subject.
•
When the camera detects a face looking toward the
camera, the focus area containing the face will be
displayed with a yellow double border. The camera
focuses on the face framed by the double border. The
double border will glow green and focus will be
locked.
16
•
When the camera detects more than one face, the closest face is framed by a double
border and the others by single borders. Up to three faces can be detected.
3
4
The shutter is automatically released.
•
•
•
If the camera detects that the face framed by the double border is smiling, the shutter
is automatically released.
When the shutter is released, automatic shooting, with which the camera detects a
smiling face and releases the shutter automatically, will be performed repeatedly.
the shutter is released with detection of a smiling face, the self-timer lamp flickers.
Exit smile mode by pressing the e button.
•
Switch to another shooting mode.
•
The camera will stop shooting if the internal memory or
memory card becomes full.
C Smile Mode
performed in any of the following situations in smile mode.
• The camera is unable to detect one or more faces.
• The camera has detected one or more faces, but is unable to detect a smiling face.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting in Smile Mode
C Face Priority and Smiling Face Detection Features
When the camera is pointed at a face looking toward the camera in smile mode, the face is
automatically recognized and the smiling face of the recognized one is detected.
• In some shooting conditions, Face priority will not take effect and smiling face cannot be detected.
C Operation of the Shutter-Release Button
Press the shutter-release button to take pictures.
• When a face is detected, the focus is locked to the detected face.
• If no face is detected, the camera focuses on the subject in center of frame.
C Functions Available in Smile Mode
• Digital zoom is not available.
Changes made to the image mode setting in this mode apply to all shooting modes (except those
available from the movie menu).
D More Information
For more information about shooting subjects with which autofocus may not perform as expected,
50
Download from Www.Somanuals.com. All Manuals Search And Download.
More on Playback
Viewing Multiple Pictures: Thumbnail Playback
Press the f (h) button in full-frame playback mode
1/ 10
thumbnail images.
The following operations can be performed while thumbnails are displayed.
To
Use
Description
A
Rotate the rotary multi selector, or press J, K, H,
or I, to choose pictures.
Choose pictures
Increase number
of picture
thumbnails
displayed
Press the f (h) button to increase number of
picture thumbnails displayed: 9 ➝ 16 ➝ 25
f (h)
–
Decrease number
of picture
thumbnails
displayed
Press the g (i) button to decrease number of
picture thumbnails displayed: 25 ➝ 16 ➝ 9
g (i)
Return to full-
frame playback
Press the k button.
k
Switch to
shooting mode
Press the c button to return to the last shooting
mode selected.
c
C Thumbnail Playback Mode Display
selected in thumbnail playback mode, the icon shown at
right is displayed with them. Movies are displayed as film
frames in all thumbnail playback modes.
Print-order icon Protect icon
1/ 10
Film frames
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Taking a Closer Look: Playback Zoom
Pressing the g (i) button during full-frame playback
center of the picture displayed in the monitor.
The guide at lower right shows which portion of the
picture is enlarged.
The following operations can be performed while pictures are zoomed in.
To
Zoom in
Use
Description
A
Zoom increases each time the g (i) button is
pressed, to a maximum of 10×.
g (i)
–
Zoom decreases each time the f (h) button is
pressed. When the magnification ratio reaches
1×, the display returns to full-frame playback
mode.
Zoom out
f (h)
–
Press the rotary multi selector H, I, J, or K to
move the display area to other areas of the
picture.
Move the display
area
Return to full-
frame playback
k
d
c
Press the k button.
Press the d button to crop current picture to
contain only the portion visible in the monitor.
Crop picture
Switch to
shooting mode
Press the c button to return to the last shooting
mode selected.
Pictures Taken Using the Face-Priority Function
When zooming in (playback zoom) on a picture taken
using the face-priority function, the picture will be
enlarged with the face detected with shooting at the
center of the monitor.
• If more than one face was detected, the picture will
be enlarged with the face on which focus was
acquired at the center of the monitor. Press the
×
2.0
rotary multi selector H, I, J, or K to display other faces that were detected.
• When the g (i) or f (h) button is pressed to adjust the zoom ratio, the
center of the picture (normal playback zoom display), rather than the face, is
displayed at the center of the monitor.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing Pictures
Use this camera to edit pictures in-camera and store them as separate files
Editing function
Description
Create a copy of the current picture with enhanced brightness
and contrast, brightening dark portions of the picture.
Enlarge the image or refine the composition and create a copy
containing only the portion visible in the monitor.
Create a small copy of pictures suitable for use on web pages or
as e-mail attachments.
C Picture Editing
edited.
• This camera’s editing functions cannot be used for pictures taken with another make or model of
camera.
• If a copy created using this camera is viewed on another make or model of camera, the picture
may not be displayed or may not be transferred to a computer.
• Editing functions are not available when there is not enough free space in the internal memory or
on the memory card.
C Restrictions on Picture Editing
(w: available, –: not available)
2nd editing
1st editing
D-Lighting
Crop
D-Lighting
Crop
w
–
Small picture
–
–
–
w
–
Small picture
–
–
• Pictures cannot be edited twice with the same editing function.
• The D-Lighting should be done first while the restricted use of combination exists.
D Original Pictures and Edited Copies
• Copies created with editing functions are not deleted if the original pictures are deleted. The
original pictures are not deleted if copies created with editing functions are deleted.
• Edited copies are stored with the same recording date and time as the original.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing Pictures
Enhancing Brightness and Contrast: D-Lighting
D-Lighting can be used to create copies with enhanced brightness and contrast,
brightening dark portions of a picture. Enhanced copies are stored as separate
files.
1
Select the desired picture from full-frame
and press the d button.
The playback menu will be shown.
2
Use the rotary multi selector to choose
D-Lighting and press the k button.
Playback menu
D-Lighting
Print set
Slide show
Delete
The original version will be shown on the left and the
edited version will be shown on the right.
Protect
Exit
3
Choose OK and press the k button.
D-Lighting
A new copy with enhanced brightness and contrast is
created.
To cancel D-Lighting, choose Cancel and press the k
button.
OK
Cancel
D-Lighting copies can be recognized by the c icon
displayed during playback.
15/11/22008 15:30
0004.JPG
4
4
D More Information
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing Pictures
Creating a Cropped Copy: Crop
Create a copy containing only the portion visible in the monitor when u is
separate files.
1
Press the g (i) button in full-frame playback
mode to zoom in on the image.
To crop a picture displayed in “tall” (portrait) orientation,
zoom in on the picture until the black bars displayed on
the both sides of the monitor disappear. The cropped
picture will be displayed in landscape orientation.
To crop the picture in its current ”tall” (portrait) orientation, first, use the Rotate image
enlarge the picture for cropping, crop the picture, and then rotate the cropped picture
back to ”tall” (portrait) orientation.
2
Refine copy composition.
Press the zoom buttons, the g (i) or f (h) button, to
adjust the zoom ratio.
Press the rotary multi selector H, I, J, or K to scroll the
picture until only the portion you want to copy is visible in
the monitor.
3
4
Press the d button.
Use the rotary multi selector to choose Yes
and press the k button.
A new picture, containing only the portion visible in the
Save this image as
displayed?
monitor, is created.
To cancel creating a cropped copy, choose No and press
the k button.
No
Yes
C Image Size
As the area to be saved is reduced, the image size (pixels) of the cropped copy is also reduced.
When the size of the cropped copy is 320 × 240 or 160 × 120, the small picture icon l or m is
displayed on the left of the screen in full-frame playback mode.
D More Information
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing Pictures
Resizing Pictures: Small Picture
Create a small copy of the current picture. Small copies are stored as JPEG files with
a compression ratio of 1:16. The following sizes are available.
Option
l 640×480
m 320×240
n 160×120
Description
Suited to television playback.
Suited to display on web pages.
Suitable for e-mail attachments.
1
Select the desired picture from full-frame
and press the d button.
The playback menu is displayed.
2
Use the rotary multi selector to choose Small
pic. and press the k button.
Playback menu
Rotate image
Small pic.
Copy
To cancel creating a small copy and return to shooting
mode, press the d button.
Exit
3
4
Choose the desired copy size and press the k
button.
Small pic.
640
320
160
×480
×240
×120
Exit
Choose Yes and press the k button.
Create small picture file?
A new, smaller copy is created.
To cancel creating a small copy, choose No and press the
k button.
No
Yes
D More Information
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Voice Memos: Recording and Playback
Use the camera’s built-in microphone to record voice
memos for pictures marked with n in full-frame
15/11/22008 15:30
0004.JPG
4
4
Recording Voice Memos
A voice memo, up to 20 seconds in length,
will be recorded while the k button is hold
down.
• Do not touch the built-in microphone
during recording.
• During recording, o and p blink in the
monitor display.
17s
Playing Voice Memos
Press the k button while a picture with a
voice memo attached is displayed in full-
frame playback mode to play voice memo.
Playback ends when the voice memo ends
or the k button is pressed again.
15/11/22008 15:30
0004.JPG
4
4
• Pictures with voice memos can be
recognized by the q icon.
• Use the zoom buttons, the g or f button, to adjust playback volume.
Deleting Voice Memos
Select a picture with a voice memo attached and press
the l button. Use the rotary multi selector to choose
w and press the k button. Only the voice memo will
be deleted.
Erase 1 image?
No
Yes
B Voice Memos
• When a picture with a voice memo attached is deleted, both the
picture and its voice memo are deleted.
• If a voice memo already exists for the current picture, a new voice memo cannot be recorded. To
modify the existing voice memo, delete only the existing voice memo and then record a new
voice memo.
• This camera cannot be used to attach voice memos to pictures taken with another make or model
of camera.
D More Information
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing Pictures by Date
In list by date mode, pictures taken on a specified date can be displayed. In full-
frame playback mode, just as with playback mode, picture display can be
enlarged, pictures can be edited, voice memos can be recorded or played back,
and movies can be played back. When the d button is pressed, the list by date
menu is displayed, and all pictures taken on a specified date can be selected for
deletion, printing, and protection.
Selecting a Date in List by Date Mode
1
Enter list by date mode by pressing
the e button in playback mode,
selecting C (use the rotary multi
selector), and then pressing the k
button.
COOLPIX S610
List by date
Dates for which pictures exist will be listed.
COOLPIX S610c
List by date
2
Choose the desired date and press the k
button.
List by date
2 0 / 1 1 / 2 0 0 8
3
2
Camera lists up to 29 dates. If pictures exist for more than
29 dates, all pictures recorded earlier than most recent 29
dates will be listed together as Others.
1 5 / 1 1 / 2 0 0 8
Others
5 6
The first picture for that date will be displayed full-frame
playback mode.
20/11/20008 15:30
0004.JPG
Press the f button in full-frame playback mode to return
to the date list.
1
3
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing Pictures by Date
Using List by Date Mode
The following operations are possible from the date selection screen.
To
Use
Description
A
Rotate the rotary multi selector, or press H or I,
to select a date.
Select date
Press the k button to display the first picture
taken on the selected date.
Press the f button in full-frame playback to
return to the date selection screen.
Switch to full-
frame playback
k
l
Press the l button after selecting a date, and a
confirmation dialog will be displayed. Choose
Yes and press the k button to delete all pictures
taken on the selected date.
Delete picture
View list by date
menu
Press the d button to display the list by date
menu.
d
e
c
View playback
mode menu
Press the e button to display the playback-
mode selection menu.
Switch to
shooting mode
Press the c button to return to the last shooting
mode selected.
B Notes on List by Date Mode
• Only the most recent 9,000 pictures can be displayed in list by date mode.
• Pictures taken with no date stamp are not listed in this mode.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing Pictures by Date
List by Date Menus
Press the d button in list by date mode to display the following menus for only
the pictures taken on the specified date.
D-Lighting*
Print set
Slide show
Delete
Protect
Rotate image*
Small picture*
* During full-frame playback mode only
be applied to all pictures taken on the same date, or all pictures taken on the same
date can be deleted. To apply options to individual pictures, or to select individual
pictures for deletion, display a picture full-frame and press the d button.
B Print Set
When print marking already exists for pictures taken on dates other than that specified, a
confirmation dialog Save print marking for other dates? will be displayed. Select Yes to add the
new print marking to the existing marking. Select No to remove the existing print marking and leave
only the new marking.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Movies
Recording Movies
To shoot movies with sound recorded via the built-in microphone, select shooting
mode and follow the steps below.
1
Enter movie mode by pressing the
e button in shooting mode,
selecting D(use the rotary multi
selector), and then pressing the k
button.
Movie
Exposure count display shows maximum
total length of movie that can be recorded.
2
Press the shutter-release button all
the way down to start recording.
The camera focuses on the subject in center
of frame.
A progress bar at the bottom of the monitor
shows the amount of recording time
remaining.
12s
To end recording, press the shutter-release button all the way down a second time.
Recording stops automatically when the internal memory or memory card becomes full,
recording time reaches 30 minutes, or movie file size reaches 2 GB.
B Shooting Movies
• Macro mode setting cannot be applied or changed while movies are being recorded. Apply or
change setting as necessary before movie recording begins.
• Optical zoom cannot be adjusted once movie recording begins. Digital zoom cannot be applied
before movie recording begins. However, digital zoom (up to 2×) can be applied while movies are
being recorded.
B Notes on Recording Movies
When the movie has been fully recorded to the internal memory or memory card, the monitor
display will revert to the normal shooting mode display. Do not open the battery-chamber/
memory card slot cover while movies are being recorded. Turning the camera off or removing the
memory card while movies are being recorded could result in loss of data or in damage to the
camera or card.
D Changing Movie Settings
61
Download from Www.Somanuals.com. All Manuals Search And Download.
The Movie Menu
movie menu.
Press the d button in movie mode to display the movie menu and use the
rotary multi selector to modify and apply settings.
DSelecting Movie Options
The movie menu offers the options shown below.
Option
Image size and frame rate
Image size: 640 × 480 pixels
ITV movie 640
(default setting)
Frame rate: 30 frames per second
Image size: 320 × 240 pixels
Frame rate: 30 frames per second
SSmall size 320
C Movie Options and Maximum Movie Length
Option
Internal memory (approx. 45 MB)
Memory card (256 MB)
Approx. 2 min 50 s
Approx. 7 min 14 s
ITV movie 640
(default setting)
32 s
SSmall size 320
1 min 22 s
* All figures are approximate. The maximum recording time may vary with make of memory card.
This camera can record movies up to 30 minutes in length or a file size of up to 2 GB. The amount
of recording time remaining (up to 30 minutes or 2 GB) is displayed during recording.
D More Information
I Autofocus Mode
Choose how the camera focuses in movie mode.
Option
Description
A Single AF
(default setting)
Camera focuses when shutter-release button is pressed halfway
and locks at this position during shooting.
Camera focuses continuously until focus is acquired and locked.
To prevent sound of camera focusing from interfering with
recording, use of Single AF is recommended.
B Full-time AF
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Movie Playback
recognized by the movie mode icons. To play a movie,
display it in full-frame playback mode and press the k
button.
15/11/22008 15:30
0010.AVI
10s
Use the zoom buttons, the g or f button, to adjust
playback volume.
Pausing
Playback controls appear at the top of the monitor.
Press the rotary multi selector J or K to choose a
control, then press the k button to perform the
selected operation. The following operations are
available.
4s
During playback
Volume indicator
To
Rewind
Select
Description
Rewind movie. Playback resumes when the k button is
K
released.
Advance movie. Playback resumes when the k button is
released.
Advance
L
Pause playback.
The following operations can be performed while playback is
paused.
Rewind movie by one frame. Rewind continues while the
k button is pressed.
M
Pause
End
O
Q
Advance movie by one frame. Advance continues while
the k button is pressed.
N
P
Resume playback.
End playback and return to full-frame playback.
Deleting Movie Files
Press the l button when displayed in full-frame
displayed. Select Yes and press the k button to delete
the movie, or select No to exit without deleting the
movie.
Erase 1 image?
No
Yes
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Voice Recordings
Making Voice Recordings
Audio voice recordings can be recorded over the built-in microphone and played
back over the built-in speaker.
1
Enter voice recording mode by
pressing the e button in
shooting mode, selecting E(use the
rotary multi selector), and then
pressing the k button.
Voice recording
The length of recording that can be made will
be displayed.
2
Press the shutter-release button all the way
down to start recording.
Voice recording
0 0 1
1 7 : 3 0
1 5 / 1 1 / 2 0 0 8
The indicator lamp lights during recording.
Max. rec. time
0 0 : 0 5 : 0 0
If no operations are performed for about 30 seconds after
voice recording begins, the camera’s auto off function is
enabled and the monitor turns off.
information.
3
Press the shutter-release button all the way down a second time to
end recording.
Recording will end automatically if the internal memory or memory card becomes full,
or after 120 minutes of recording on the memory card.
D More Information
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Making Voice Recordings
Operations During Recording
Voice recording
Date and time of recording
Time remaining
Recording indicator
File number
Length of recording
0 0 1 1 5 / 1 1 / 2 0 0 8 1 7
0 0 0 1 0 0 / 0 0 0 4 : 0 0
:
3 0
:
:
:
Progress indicator
To
Press
Description
Reactivate the
monitor
If the monitor has turned off, press the c button to
reactivate.
c
Pause/resume
recording
Press once to pause recording; indicator lamp will blink.
k
Press the shutter-release button all the way down a
second time to end recording.
End recording
B Voice Recordings
The files transferred to a computer can be played back using QuickTime or any other WAV-
compatible audio player.
D More Information
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Voice Recordings
1
Enter sound file playback mode by
pressing the e button in
playback mode, selecting E (use the
rotary multi selector), and then
pressing the k button.
COOLPIX S610
Sound file playback
Voice recordings can also be played back by
pressing the c button in voice recording
selection screen.
COOLPIX S610c
Sound file playback
2
Choose the desired sound file and press the
k button.
Select sound file
0 0 1
0 0 2
1 5 / 1 1 / 2 0 0 8 1 7 : 3 0
1 5 / 1 1 / 2 0 0 8 1 8 : 3 0
2 6 / 1 1 / 2 0 0 8 1 3 : 0 0
2 9 / 1 1 / 2 0 0 8 1 6 : 4 0
0 3 / 1 2 / 2 0 0 8 0 8 : 0 0
The selected sound file will be played back.
0 0 3
0 0 4
0 0 5
Copy
Play
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Voice Recordings
Operations During Playback
Sound file playback
Date and time of recording
Length of recording
Control icons
File number
Playback time
0 0 1 1 5 / 1 1 / 2 0 0 8 1 7
:
3 0
0 0 0 0 0 5 0 0 0 0 : 2 0
:
:
/
:
Progress indicator
Volume
Use the zoom buttons, the g or f button, to adjust playback volume.
Playback controls appear at the top of the monitor. Press the rotary multi selector
J or K to choose a control, then press the k button to perform the selected
operation. The following operations are available.
To
Press
Description
Rewind voice recording. Playback resumes when the k button is
released.
Rewind
K
Advance voice recording. Playback resumes when the k button is
released.
Advance
L
O
P
Pause playback.
Pause
End
Resume playback that has been paused.
Q
End playback and return to the sound file selection screen.
Deleting Sound Files
Press the l button during playback or after selecting a
sound file from the sound file selection screen. A
confirmation dialog is displayed. To delete the file, select
Yes and press the k button. To exit without deleting
Delete
File will be deleted. OK?
No
Yes
the sound file, select No
.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Copying Voice Recordings
Copy voice recordings between the internal memory and a memory card. This
option is available only when a memory card is inserted.
1
Display the sound file selection screen shown
button.
2
Use the rotary multi selector to choose the
option and press the k button.
Copy sound files
q: Copy recordings from internal memory to
memory card
r: Copy recordings from memory card to internal
Exit
memory
3
4
5
Choose the copy option and press the k
button.
Camera to card
Selected files
Copy all files
Selected files: Proceed to step 4
Copy all files: Proceed to step 5
Exit
Choose the desired file.
Select sound files
0 0 1 1 5 / 1 1 / 2 0 0 8 1 7 : 3 0
0 0 2 1 5 / 1 1 / 2 0 0 8 1 8 : 3 0
Press the rotary multi selector K to select the file (y).
Press the rotary multi selector K again to cancel the
selection.
2 6 / 1 1 / 2 0 0 8 1 3 : 0 0
0 0 4 2 9 / 1 1 / 2 0 0 8 1 6 : 4 0
0 0 5
0 0 3
•
•
Multiple files can be selected.
0 3 / 1 2 / 2 0 0 8 0 8 : 0 0
Press the k button to finalize file selection.
Exit
Select
When a confirmation dialog is displayed, choose Yes and press the k
button.
Copying starts.
B Voice Recordings
This camera may be unable to copy sound files created with another make or model of camera.
C No sound file. Message
message, No sound file., will be displayed. Press the d button to display the copy sound files
screen, and copy the sound files stored in the camera’s internal memory to the memory card.
Download from Www.Somanuals.com. All Manuals Search And Download.
68
Connecting to Televisions, Computers, and Printers
Connecting to a TV
Connect the camera to a television using the supplied audio/video cable to play
back pictures on the television.
1
Turn off the camera.
2
Connect the camera to the TV using the supplied audio/video cable.
Connect the yellow plug to the video-in jack on the TV, and the white plug to the audio-
in jack.
Yellow White
3
4
Tune the television to the video channel.
See the documentation provided with your television for details.
Hold down the c button to turn on the
camera.
The camera enters playback mode, and pictures recorded
to the internal memory, or memory card, will be
displayed on the television.
While connected to the TV, the camera monitor will
remain off.
B Connecting an Audio/Video Cable
When connecting the audio/video cable, be sure that the camera connector is oriented correctly. Do
not use force when connecting the audio/video cable to the camera. When disconnecting the
audio/video cable, do not pull the connector at an angle.
B Video Mode
Be sure that the camera’s video mode setting conforms to the standard used by your television.
Download from Www.Somanuals.com. All Manuals Search And Download.
69
Connecting to a Computer
Use the supplied USB cable to connect the camera to a computer, and copy
(transfer) pictures to a computer with the supplied Nikon Transfer software.
Before Connecting the Camera
Install the Software
Before connecting the camera to a computer, software, including Nikon Transfer
and Panorama Maker for creating panorama images, must be installed from the
supplied Software Suite CD. For more information on installing the software, refer
to the Quick Start Guide.
Operating Systems Compatible with the Camera
Windows
Preinstalled versions of 32-bit Windows Vista Service Pack 1 (Home Basic/Home
Premium/Business/Enterprise/Ultimate editions), Windows XP Service Pack 3
(Home Edition/Professional)
Macintosh
Mac OS X (version 10.3.9, 10.4.11, 10.5.3)
Refer to the Nikon website for the latest information on operating system
compatibility.
B Note on Power Source
When connecting the camera to a computer or printer, use a fully charged battery to prevent the
camera from turning off unexpectedly.
C If You Are Using Windows 2000 Professional
• Do not connect the camera to the computer.
• Use a card reader or similar device to transfer pictures stored on the memory card to the computer
• If the camera has been connected to the computer, the Found New Hardware Wizard dialog is
displayed. Select Cancel to close the dialog and disconnect the camera from the computer.
Download from Www.Somanuals.com. All Manuals Search And Download.
70
Connecting to a Computer
Transferring Pictures from a Camera to a Computer
1
2
3
Start the computer to which Nikon Transfer was installed.
Turn off the camera.
Connect the camera to the computer using the supplied USB cable.
4
Turn on the camera.
The power-on lamp will light.
Windows Vista
When the AutoPlay dialog is displayed, click Copy
pictures to a folder on my computer using Nikon
Transfer. Nikon Transfer will start. To bypass this dialog in the future, check Always do
this for this device:.
Windows XP
When the action selection dialog is displayed, select Nikon Transfer Copy pictures to
a folder on my computer, and click OK. Nikon Transfer will start. To bypass this dialog
in the future, check Always use this program for this action..
Mac OS X
Nikon Transfer will start automatically if Yes was selected in the Auto-Launch setting
dialog when Nikon Transfer was first installed.
B Connecting the USB Cable
• When connecting the USB cable, be sure that the connectors are oriented correctly. Do not use
force when connecting the USB cable. When disconnecting the USB cable, do not pull the
connector at an angle.
• Connection may not be recognized when the camera is connected to a computer via a USB hub.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a Computer
5
Transfer pictures when Nikon Transfer has finished loading.
Click Start Transfer in Nikon Transfer. At the default setting, all pictures are transferred
to the computer.
.
S610 or S610c is
displayed.
Start Transfer button
At the Nikon Transfer default setting, the folder to which pictures are transferred is
automatically opened when transfer is complete.
If ViewNX has been installed, ViewNX will start automatically and transferred pictures can
be viewed.
For more information on using Nikon Transfer, refer to help information contained in
Nikon Transfer.
6
Disconnect the camera when transfer is complete.
Turn the camera off and disconnect the USB cable.
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a Computer
D Using a Card Reader
The pictures stored on the memory card inserted into a card reader or similar device can also be
transferred to the computer using Nikon Transfer.
• If the memory card has a capacity greater than 2 GB, or is SDHC-compliant, the intended device
must support these features of the memory card.
• At the Nikon Transfer default settings, Nikon Transfer will start automatically when a memory card
is inserted into the card reader or similar device. See step 5 of “Transferring Pictures from a Camera
• To transfer pictures stored in the camera’s internal memory to the computer, the pictures must
D Using Standard OS Operations to Open Image/Sound Files
• Navigate to the folder on the computer’s hard disk to which pictures were saved and open a
picture in the viewer supplied with your operating system.
• Sound files copied to the computer can be played back using QuickTime or any other WAV-
compatible audio player.
D Panorama Creation with Panorama Maker
a single panorama photo with Panorama Maker.
• Panorama Maker can be installed to a computer using the supplied Software Suite CD. After
installation is complete, follow the procedure described below to start Panorama Maker.
Windows
Open All Programs (Programs under Windows 2000) from the Start menu>ArcSoft
Panorama Maker 4>Panorama Maker 4.
Macintosh
Open Applications by selecting Applications from the Go menu, and double-click the
Panorama Maker 4 icon.
• For more information on using Panorama Maker, refer to the on-screen instructions and help
information contained in Panorama Maker.
D Image File Names and Folder Names
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a Printer
to the printer and print pictures without using a computer.
Take pictures
Select pictures for printing
using Print set option
Print pictures one at a
Turn camera off and disconnect USB cable
B Note on Power Source
When connecting the camera to a printer, use a fully charged battery to prevent the camera from
turning off unexpectedly.
D Printing Pictures
In addition to printing pictures transferred to a computer from your personal printer and printing
over a direct camera-to-printer connection, the following options are also available for printing
pictures:
• Insert a memory card into a DPOF-compatible printer’s card slot
• Take a memory card to a digital photo lab
For printing using these methods, specify the pictures and the number of prints each using your
74
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a Printer
Connecting the Camera and Printer
1
Turn off the camera.
2
3
Turn on the printer.
Check printer settings.
Connect the camera to the printer using the supplied USB cable.
4
Turn on the camera.
When connected correctly, the PictBridge start-up screen
1 will be displayed in the camera monitor. Then the
print selection screen will be displayed 2.
1
2
Print selection
15/11
2008
NO. 57
[
57]
B Connecting the USB Cable
When connecting the USB cable, be sure that the connectors are oriented correctly. Do not use force
when connecting the USB cable. When disconnecting the USB cable, do not pull the connector at an
angle.
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a Printer
Printing Pictures One at a Time
following the procedure below.
1
2
3
4
5
Use the rotary multi selector to choose the
desired picture and press the k button.
Print selection
15/11
2008
Press the f (h) button to display 12 thumbnails, and the
g (i) button to switch back to full-frame playback.
NO.
1
[
57]
Choose Copies and press the k button.
PictBridge
Start print
Copies
Paper size
Exit
Choose the number of copies (up to nine) and
press the k button.
Copies
4
Exit
Choose Paper size and press the k button.
PictBridge
Start print
Copies
Paper size
Exit
Choose the desired paper size and press the
k button.
Paper size
Default
3.5 × 5 in.
5 × 7 in.
100 × 150mm
4 × 6 in.
To specify paper size using printer settings, choose
Default in the paper size menu.
Exit
76
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a Printer
6
Choose Start print and press the k button.
PictBridge
Start print
Copies
Paper size
Exit
7
Printing starts.
Monitor display returns to that shown in step 1 when
printing is complete.
Printing
002/004
To cancel before all copies have been printed, press the
k button.
Cancel
Current print/
total number of prints
Printing Multiple Pictures
following the procedure below.
1
2
When the print selection screen is displayed,
press the d button.
The print menu is displayed.
Use the rotary multi selector to choose Paper
size and press the k button.
Print menu
Print selection
Print all images
DPOF printing
Paper size
To exit the print menu, press the d button.
Exit
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a Printer
3
Choose the desired paper size and press the
k button.
Paper size
Default
3.5 × 5 in.
5 × 7 in.
100 × 150mm
4 × 6 in.
To specify paper size using printer settings, choose
Default in the paper size menu.
Exit
4
Choose Print selection, Print all images or
DPOF printing and press the k button.
Print menu
Print selection
Print all images
DPOF printing
Paper size
Exit
Print selection
Choose the pictures (up to 99) and number of
copies (up to nine) of each.
Print selection
10
Rotate the rotary multi selector, or press J or K,
to select pictures, and press H or I to set the
number of copies for each.
Pictures selected for printing can be recognized
by the check mark (y) and the numeral
indicating the number of copies to be printed. A
check mark is not displayed with pictures for
Back
which no copies have been specified and these pictures will not be printed.
Press the g (i) button to switch to full-frame playback.
Press the f (h) button to switch back to thumbnail display.
Press the k button when setting is complete.
To print, choose Start print from the menu
displayed and shown at right, and press the k
button.
Print selection
010 prints
Choose Cancel and press the k button to
return to the print menu.
Start print
Cancel
Exit
78
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a Printer
Print all images
All pictures stored in the internal memory, or on
Print all images
018 prints
the memory card, are printed one at a time.
To print, choose Start print from the menu
displayed and shown at right, and press the k
button.
Choose Cancel and press the k button to
return to the print menu.
Start print
Cancel
Exit
DPOF printing
Print pictures for which a print order was
To print, choose Start print from the menu
displayed and shown at right, and press the k
button.
Choose Cancel and press the k button to
return to the print menu.
DPOF printing
010 prints
Start print
View images
Cancel
Exit
To view the current print order, choose View
images and press the k button. To print
pictures, press the k button again.
View images
10
Back
5
Printing starts.
Monitor display returns to the print menu (step 2) when
printing is complete.
Printing
002/010
To cancel before all copies have been printed, press the
k button.
Cancel
Current print/
total number of prints
C Paper Size
The camera supports the following paper sizes: Default (the default paper size for the current
printer), 3.5 × 5 in., 5 × 7 in., 100 × 150mm, 4 × 6 in., 8 × 10 in., Letter, A3, and A4. Only sizes
supported by the current printer will be displayed.
79
Download from Www.Somanuals.com. All Manuals Search And Download.
Creating a DPOF Print Order: Print Set
The Print set option in the playback menu is used to create digital “print orders”
When the camera is connected to a PictBridge-compatible printer, pictures can be
printed from the printer according to the DPOF print order you have created for
pictures on the memory card. If the memory card is removed from the camera, you
can create the DPOF print order for pictures in the internal memory and print
pictures according to the DPOF print order.
1
Press the d button in playback mode.
The playback menu is displayed.
2
Use the rotary multi selector to choose Print
set and press the k button.
Playback menu
D-Lighting
Print set
Slide show
Delete
Protect
Exit
3
4
Choose Select images and press the k
button.
Print set
Select images
Delete print set
Exit
Choose the pictures (up to 99) and number of
copies (up to nine) of each.
Print selection
Rotate the rotary multi selector, or press J or K, to select
pictures, and press H or I to set the number of copies
for each.
Pictures selected for printing can be recognized by the
check mark (y) icon and the numeral indicating the
number of copies to be printed. A check mark is not
Back
displayed with pictures for which no copies have been specified and these pictures will
not be printed.
Press the g (i) button to switch to full-frame playback.
Press the f (h) button to switch back to thumbnail display.
Press the k button when setting is complete.
80
Download from Www.Somanuals.com. All Manuals Search And Download.
Creating a DPOF Print Order: Print Set
5
Choose whether or not to also print shooting
date and photo information.
Print set
Done
Choose Date and press the k button to print date of
recording on all pictures in the print order.
Date
Info
Choose Info and press the k button to print photo
information (shutter speed and aperture) on all pictures in
the print order.
Exit
Choose Done and press the k button to complete the print order and exit.
Pictures selected for printing are recognized by the w
icon displayed with playback.
15/11/22008 15:30
0004.JPG
4
4
B Notes on Printing Shooting Date and Photo Information
When the Date and Info options are enabled in the Print set menu, shooting date and photo
printing of shooting date and photo information is used.
• Photo information cannot be printed when the camera is connected directly to a printer, via the
• Date and Info are reset each time the print set menu is displayed.
C Deleting All Print Orders
Choose Delete print set in step 3 and press the k button. Print orders for all pictures will be
deleted.
C Note on the Print Set Date Option
The date and time printed on pictures with DPOF printing when
Date in the print set menu is enabled, are those recorded with the
picture as it was taken. Date and time printed using this option are
not affected when the camera’s date and time setting are changed
from the setup menu after pictures are recorded.
15.11.2008
D Date Imprint
in the setup menu, pictures with the date and time imprinted on them can be printed from printers
that do not support printing of the date and time on pictures. Only the Date Imprint date and time
on pictures will be printed, even if Print set is enabled with Date selected in the print set screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
81
Shooting, Playback, and Setup Menus
Shooting Options: The Shooting Menu
The shooting menu of A(auto) mode contains the following options.
A
B
G
C
E
F
G
I
Image mode*
Choose image size and quality.
White balance
Match white balance to the light source.
Metering
Choose how the camera meters exposure.
Continuous
Change settings for Continuous or BSS (best shot selector).
ISO sensitivity
Control camera’s sensitivity to light.
Color options
Apply color effects to pictures as they are recorded.
AF area mode
Choose where the camera focuses.
Autofocus mode
Choose how the camera focuses.
* The Image mode setting is also available from other shooting menus (except the movie
menu).
Displaying the Shooting Menu
Enter A(auto) mode by pressing the e button in shooting mode and then
selecting A(auto). Press the d button to display the shooting menu.
Shooting
Shooting menu
Image mode
White balance
Metering
Continuous
ISO sensitivity
Exit
• To return to the shooting mode from the shooting menu, press the d button.
B Functions that Cannot Be Applied Simultaneously
82
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting Options: The Shooting Menu
A Image Mode
Choose an image mode, which is the combination of image size and image quality
(compression), according to how you plan to use the picture and the capacity of
the internal memory or memory card. The larger the image, the larger the size at
which it can be printed or displayed without becoming noticeably “grainy,”
limiting the number of pictures that can be recorded.
Option
Size (pixels)
Description
Highest quality, suitable for enlargements or
h
i
High (3648P)
3,648 × 2,736 high-quality prints. The compression ratio is
approximately 1:4.
Normal (3648)
(default setting)
3,648 × 2,736
Best choice in most situations. The compression
3,072 × 2,304 ratio is approximately 1:8.
K
L
Normal (3072)
Normal (2592)
2,592 × 1,944
Smaller size allows more pictures to be stored.
2,048 × 1,536
M
N
Normal (2048)
The compression ratio is approximately 1:8.
Suited to display on computer monitor. The
1,024 × 768
PC screen (1024)
compression ratio is approximately 1:8.
Suited to full-screen display on a television or
distribution by e-mail or the web. The
compression ratio is approximately 1:8.
O
TV screen (640)
640 × 480
l
m
16:9 (3584)
16:9 (1920)
3,584 × 2,016 Pictures with an aspect ratio of 16:9 can be taken.
The compression ratio for both image sizes is
1,920 × 1,080
approximately 1:8.
The icon for the current setting is displayed in the monitor in shooting and
C Image Mode
Changes made to the image mode setting apply to all shooting modes (except those available from
the movie menu).
83
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting Options: The Shooting Menu
C The Number of Exposures Remaining
The following table lists the approximate number of pictures that can be stored in internal memory
and on a 256 MB memory card. Note that the number of pictures that can be stored will differ
depending on the composition of the picture (due to JPEG compression). In addition, this number
may differ depending on the make of memory card, even if the capacity for the memory card is the
same.
1
Internal memory Memory card
2
Setting
Print size (cm/in.)
(approx. 45 MB)
(256 MB)
h
i
K
L
M
N
O
l
m
High (3648P)
Normal (3648)
Normal (3072)
Normal (2592)
Normal (2048)
PC screen (1024)
TV screen (640)
16:9 (3584)
9
50
31 × 23/12.2 × 9
31 × 23/12.2 × 9
26 × 19.5/10.2 × 7.6
22 × 16.5/8.6 × 6.4
17 × 13/6.7 × 5.1
9 × 7/3.5 × 2.7
16
90
22
120
31
170
49
270
159
319
22
850
1700
120
5 × 4/1.9 × 1.5
30 × 17/11.8 × 6.6
16 × 9/6.3 × 3.5
16:9 (1920)
73
400
1
2
If the number of exposures remaining is 10,000 or more, the number of exposure
remaining display shows 9999.
Print size at an output resolution of 300 dpi. Print sizes are calculated by dividing the
number of pixels by printer resolution (dpi) and multiplying by 2.54 cm (1 in.). However, at
the same image size, pictures printed at higher resolutions will print smaller than the size
indicated, and those printed at lower resolutions will print larger than the size indicated.
84
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting Options: The Shooting Menu
B White Balance
The color of light reflected from an object varies with the color of the light source.
The human brain is able to adapt to changes in the color of the light source, with
the result that white objects appear white whether seen in the shade, direct
sunlight, or under incandescent lighting. Digital cameras can mimic this
adjustment by processing images according to the color of the light source. This is
known as “white balance.” For natural coloration, choose a white balance setting
that matches the light source before shooting. Although the default setting, Auto,
can be used under most types of lighting, you can apply the white balance setting
suited to a particular light source to achieve more accurate results.
a
Auto (default setting)
White balance automatically adjusted to suit lighting conditions. Best choice in
most situations.
b
Preset manual
Neutral-colored object used as reference to set white balance under unusual
c
d
e
f
g
Daylight
White balance adjusted for direct sunlight.
Incandescent
Use under incandescent lighting.
Fluorescent
Use under most types of fluorescent lighting.
Cloudy
Use when shooting under overcast skies.
Flash
Use with the flash.
The effects of the selected option can be previewed in the monitor. At settings
B Flash Mode
85
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting Options: The Shooting Menu
Preset Manual
Preset manual is used with mixed lighting or to compensate for light sources with
a strong color cast (for example, to make pictures taken under a lamp with a red
shade look as though they had been taken under white light).
1
2
Place a white or gray reference object under the lighting that will be
used during shooting.
Use the rotary multi selector to choose
White balance
bPreset manual in the white balance menu,
and press the k button.
Auto
Preset manual
Daylight
Incandesscent
Fluoresscent
The camera zooms in.
Exit
3
4
Choose Measure.
Preset manual
To apply the most recently measured value for preset
manual, choose Cancel and press the k button.
Cancel
Measure
Exit
Frame the reference object.
Preset manual
Cancel
Measure
Exit
Reference object frame
5
Press the k button to measure the white balance value.
The shutter is released and the new white-balance value is set.
No pictures are recorded.
C Note on Preset Manual
Regardless of the flash mode selected, the flash will not fire when the k button is pressed in step 5.
Therefore, the camera cannot measure a value for preset manual for when the flash is used.
Download from Www.Somanuals.com. All Manuals Search And Download.
86
Shooting Options: The Shooting Menu
G Metering
Choose how the camera meters exposure.
G
q
Matrix (default setting)
Camera sets exposure for entire frame. Recommended in most situations.
Center-weighted
Camera meters entire frame but assigns greatest weight to subject in center of
frame. Classic meter for portraits; preserves background details while letting lighting
conditions at center of frame determine exposure. Can be used with focus lock
B Note on Metering
When digital zoom is in effect, Metering is set to Center-weighted, and the metered area is not
displayed in the monitor.
D Metering Area
The active metering area is displayed in the monitor when Center-weighted is selected.
Active metering area
16
87
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting Options: The Shooting Menu
C Continuous
Change settings to Continuous or Best Shot Selector (BSS). Flash will be switched
off when Continuous or BSS is selected. Focus, exposure, and white balance are
fixed at the values for the first picture in each series.
U
Single (default setting)
One picture is taken each time shutter-release button is pressed.
V
Continuous
While the shutter-release button is held down, pictures are taken at rate of up to
about 1.0 frames per second (fps) when image mode is set to i Normal (3648).
Shooting ends when the shutter-release button is released, or ten shots have been
taken with the shutter-release button held down.
j
BSS
BSS is recommended for shooting under low lighting without the flash, with the
camera zoomed in, or in other situations in which camera shake is likely to blur
pictures.
The camera takes up to ten pictures while the shutter-release button is held down.
The sharpest picture (picture with the most detail) in the series is automatically
selected and saved.
At settings other than Single, the indicator for the current setting is displayed in
B Note on Continuous Shooting
The maximum frame rate with continuous shooting may vary, depending upon the current image
mode setting and the memory card used.
B Note on Best Shot Selector
BSS may not produce the desired results if the subject moves or the composition changes while the
shutter-release button is pressed all the way down.
88
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting Options: The Shooting Menu
E ISO Sensitivity
Sensitivity is a measure of how quickly the camera reacts to light. The higher the
sensitivity, the less light needed to make an exposure. Although a high ISO rating
is suited for taking pictures of subjects in action or in poor lighting, high sensitivity
is often associated with “noise” -randomly spaced, brightly colored pixels
concentrated in dark parts of the image.
Auto (default setting)
Sensitivity is ISO 100 under normal conditions; when lighting is poor, the camera
compensates by raising sensitivity to a maximum of ISO 1600.
100, 200, 400, 800, 1600, 3200
Sensitivity will be locked at the specified value.
when Auto is selected for Motion detection.
If Auto is selected and the sensitivity is raised above an ISO 100, the E icon will
F Color Options
Make colors more vivid or record pictures in monochrome.
n
o
p
q
r
u
Standard color (default setting)
Use for pictures exhibiting natural color.
Vivid color
Use to achieve a vivid, “photoprint” effect.
Black-and-white
Record pictures in black-and-white.
Sepia
Record pictures in sepia tones.
Cyanotype
Record pictures in cyan-blue monochrome.
Pastel
Change to a pastel shade.
At settings other than Standard color, the icon for the current setting is displayed
setting.
89
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting Options: The Shooting Menu
G AF Area Mode
Use this option to determine where the camera focuses.
When digital zoom is in effect, the camera will focus on the subject in the center
focus area regardless of the applied AF area mode option.
z
Face priority
The camera automatically detects and focuses on a
face looking toward the camera (Shooting with Face
faces, the camera focuses on the face closest to the
camera.
When shooting pictures of subjects other than
people, or framing a subject with which no face is
recognized, AF area mode will be set to Auto. The
camera chooses the focus area (one of nine)
containing the subject closest to the camera and focuses on the subject.
16
w
Auto (default setting)
Camera automatically selects the focus area (one of
nine) containing the subject closest to the camera.
Press the shutter-release button halfway to activate
the focus area. When the shutter-release button is
pressed halfway, the focus area selected by the
camera will be displayed in the monitor.
16
Focus areas
x
Manual
This option is suited to situations in which the
intended subject is relatively still and not positioned
in the center of the frame.
AF area
Press the rotary multi selector H, I, J or K to
select one of 99 focus areas displayed in the
monitor’s focus-area selection screen, and shoot.
To end focus-area selection and adjust the flash
mode, macro mode, self-timer and exposure
compensation settings, press the k button. To
return to the focus-area selection screen, press the
k button.
Selectable focus areas
90
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting Options: The Shooting Menu
y
Center
Camera focuses on subject in center of frame.
Center focus area is always used.
16
AF area
D Focus Lock
To focus on off-center subjects when Center is selected for AF area mode, use focus lock as
described below.
1
Position the subject in the center of the frame.
16
2
Press the shutter-release button halfway.
• Confirm that the focus area indicator is green.
• Focus and exposure are locked.
1/250 F2.7
3
4
Continue holding down the shutter-release button halfway
and recompose the picture.
• Be sure that the distance between the camera and the
subject does not change.
1/250 F2.7
Press the shutter-release button the rest of the way down to
shoot.
D More Information
91
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting Options: The Shooting Menu
Shooting with Face Priority
The face-priority function is activated when Face priority is selected for AF area
The camera automatically detects and focuses on a face looking toward the
camera.
1
Frame a picture.
When the camera detects a face looking toward the
camera, that face will be framed by a yellow double
border.
16
When the camera detects more than one face, operation varies, depending upon the
shooting mode, as follows.
Faces framed by
a double border
The number of faces
to be recognized
Shooting mode
A(auto) mode
The face closest to the camera
* The other faces are framed by Up to 12
a single border.
(Face priority)
Scene mode: Portrait,
Night portrait
The face closest to the center of
the frame
* The other faces are framed by
Smile mode
Up to 3
a single border.
2
Press the shutter-release button halfway.
The camera focuses on the face framed by the double
border. The double border will glow green and focus will
be locked.
When the camera is unable to focus, the double border
will blink. Press the shutter-release button halfway again
and focus.
1/250 F2.7
Press the shutter-release button the rest of the way down
to take the picture.
You don’t need to press the shutter-release button halfway in smile mode. If the camera
Download from Www.Somanuals.com. All Manuals Search And Download.
92
Shooting Options: The Shooting Menu
B Notes on Face Priority
• When Face priority is selected for AF area mode, the setting will automatically switch to Auto if
no face is detected when the shutter-release button is pressed halfway.
• If no face is detected when the shutter-release button is pressed halfway in Portrait or Night
portrait scene mode, or smile mode, the camera will focus on the subject in the center focus area.
• The camera may be unable to detect faces in the following situations:
- When faces are partially hidden by sunglasses or other obstructions
- When faces take up too much or too little of the frame
- When the subject is not looking directly at the camera
• The camera’s ability to detect faces depends on a variety of factors, including whether or not the
subject is facing the camera.
the subject may not be in focus despite the fact that the double border glows green. Should this
occur, switch to A(auto) mode and set AF area mode to Manual or Center, refocus on another
subject positioned at the same distance from the camera as the actual portrait subject, and use
• When pictures in which a face was detected during shooting are played back, the pictures will be
automatically rotated for playback display, according to the orientation of the face detected.
I Autofocus Mode
Choose how the camera focuses.
A
B
Single AF (default setting)
Camera focuses when the shutter-release button is pressed halfway.
Full-time AF
Camera adjusts focus continuously until the shutter-release button is pressed
halfway. Use with moving subjects.
B Notes on Autofocus Mode
Autofocus mode will be automatically fixed at Single AF when Face priority is selected for AF
93
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting Options: The Shooting Menu
Functions that Cannot Be Applied Simultaneously
Restrictions apply to the following settings in A(auto) mode.
Flash mode
Flash mode is automatically set to W(Off) and cannot be adjusted when
Continuous or BSS is selected for the Continuous setting. Selecting Single for
Continuous restores the last flash mode setting applied.
Self-timer
If self-timer is on, only one picture will be taken when the shutter is released,
regardless of settings selected for the Continuous setting. The last Continuous
setting applied is restored when picture is taken or self-timer is turned off.
White balance and Color options
White balance is automatically set to Auto and cannot be adjusted when Black-
and-white, Sepia, or Cyanotype is selected for Color options.
Selecting Standard color, Vivid color, or Pastel restores the last White balance
setting applied.
Autofocus mode
Autofocus mode is automatically set to Single AF and cannot be adjusted when
Face priority is selected for AF area mode.
The last autofocus mode setting applied is restored when any setting other than
Face priority is selected for AF area mode.
94
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback Options: The Playback Menu
The playback menu contains the following options.
I
a
b
D-Lighting
Enhances brightness and contrast in dark portions of pictures.
Print set
Select pictures to print and the number of copies for each.
Slide show
View pictures stored in the internal memory or on a memory card in an
automatic slide show.
c
Delete
Delete all or selected pictures.
d
f
g
h
Protect
Protect selected pictures from accidental deletion.
Rotate image
Change the orientation of an existing picture.
Small pic.
Create a small copy of the current picture.
Copy
Copy files between memory card and internal memory.
Displaying the Playback Menu
Enter the playback mode by pressing the c button.
Display the playback menu by pressing the d button.
Playback menu
D-Lighting
Print set
Slide show
Delete
Protect
Exit
• To exit the playback menu, press the d button.
95
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback Options: The Playback Menu
Selecting Pictures
The picture selection screen, as shown at right, will be
displayed with the following menus:
Erase selected images
•
Delete>Erase selected images
Back
•
Setup menu:
Follow the procedure described below to select pictures.
1
Rotate the rotary multi selector, or press J or
K, to choose the desired picture.
Erase selected images
Only one picture can be selected for Rotate image and
Welcome screen. Proceed to step 3.
Press the g (i) button to switch to full-frame playback.
Back
Press the f (h) button to switch back to thumbnail
display.
2
3
Press H or I to select ON or OFF (or the
number of copies).
Erase selected images
When ON is selected, a check mark (y) is displayed in the
current picture. Repeat steps 1 and 2 to select additional
pictures.
Back
Press the k button to apply picture selection.
96
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback Options: The Playback Menu
b Slide Show
Play back pictures, stored in the internal memory or on a memory card, one by one
in an automated “slide show”.
1
Use the rotary multi selector to choose Start
and press the k button.
Slide show
Pause:
To change the interval between pictures, choose Frame
intvl, select the desired interval time, and press the k
button before choosing Start.
Start
Frame intvl
Loop
Exit
To repeat the slide show automatically, enable Loop and
press the k button before choosing Start. The check
mark (w) will be added to the loop option when enabled.
2
3
The slide show begins.
While the slide show is in progress, the following
operations can be performed:
•
Press the rotary multi selector K to view pictures in the
order recorded, or J to view pictures in reverse order.
Press and hold K to fast forward, or J to rewind.
•
Press the k button to pause the slide show.
Choose End or Restart.
Pause
When the slide show ends or is paused, choose End and
press the k button to return to the playback menu, or
choose Restart to play the slide show again.
Restart
End
Frame intvl
B Notes on Slide Show
• Movies are not included in slide shows.
97
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback Options: The Playback Menu
c Delete
Delete selected pictures or all pictures.
Erase selected images
Erase all images
Delete all pictures.
C Notes on Deletion
• Once deleted, pictures cannot be recovered. Transfer important images to a computer before
deletion.
• Pictures marked with the s icon are protected and cannot be deleted.
C Deleting Picture Bank Images (For Users of the COOLPIX S610c)
Select the Picture Bank images option (51 of the Wireless LAN Connection Guide) from the Delete
item in list by date menu to delete only those pictures, taken on the specified date, that have already
been uploaded to the my Picturetown server.
d Protect
Note, however, that formatting the camera’s internal memory or the memory card
98
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback Options: The Playback Menu
f Rotate Image
Change the orientation of pictures played back in the camera’s monitor after
shooting.
Pictures can be rotated 90° clockwise or counterclockwise. Pictures that were
recorded in the portrait (vertical) orientation can be rotated up to 180° in either
direction.
display the Rotate image screen.
Press the rotary multi selector J or K to rotate the picture 90°.
Rotate image
Rotate image
Rotate image
Back
Rotate
Back
Rotate
Back
Rotate
Rotate 90° counterclockwise
Rotate 90° clockwise
Press the k button to set the orientation displayed, and save the orientation data
with the picture.
99
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback Options: The Playback Menu
h Copy
Copy pictures between the internal memory and a memory card.
1
Use the rotary multi selector to select an
option from the copy screen and press the k
button.
Copy
q: Copy pictures from internal memory to memory
card.
Exit
r: Copy pictures from memory card to internal
memory.
2
Select a copy option and press the k button.
Camera to card
Selected images
All images
Selected images: Copy pictures selected from the
All images:
Copy all pictures.
Exit
B Notes on Copying Pictures
• JPEG-, AVI-, and WAV-format files can be copied. Files recorded in any other format cannot be
copied.
with the pictures.
• Pictures recorded with another make or model of camera or that have been modified on a
computer cannot be copied.
C Memory contains no images. Message
If there are no pictures stored on the memory card when playback mode is applied, the message,
Memory contains no images., will be displayed. Press the d button to display the copy option
screen, and copy the pictures stored in the camera’s internal memory to the memory card.
D More Information
100
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Camera Setup: The Setup Menu
The setup menu contains the following options.
Menus
a
c
d
e
f
g
U
Choose how menus are displayed.
Welcome screen
Select screen displayed when camera is turned on.
Date
Set camera clock and choose home and destination time zones.
Monitor settings
Adjust monitor brightness and choose display style.
Date imprint
Imprint date or date counter on pictures.
Vibration reduction
Choose whether or not vibration reduction is enabled.
Motion detection
Adjust the motion detection setting to reduce the effects of camera shake and
subject movement when shooting still pictures.
AF assist
h
u
i
k
Enable or disable AF assist illumination.
Digital zoom
Enable or disable digital zoom.
Sound settings
Adjust sound settings.
Auto off
Set time before camera enters standby mode.
Format memory/Format card
Format internal memory or memory card.
Language
l/m
n
Choose language used for camera monitor display.
Video mode
o
Adjust settings necessary for connection to TV.
Reset all
p
Restore camera settings to default values.
Wireless settings (COOLPIX S610c only)
q
Adjust settings for wireless LAN features. See the Wireless LAN Connection Guide for
more information.
Firmware version
r
Display camera firmware version.
Download from Www.Somanuals.com. All Manuals Search And Download.
101
Basic Camera Setup: The Setup Menu
Displaying the Setup Menu
First, display the shooting-mode or playback-mode selection menu by pressing
the e button. Then select F(use the rotary multi selector), press the k
button.
Set up
Set up
Menus
Welcome screen
Date
Monitor settings
Date imprint
• To exit the setup menu, press the e button and choose any mode other
than setup mode.
a Menus
Select a format for menu display.
Text (default setting)
Menus are displayed in list format.
Set up
Menus
Welcome screen
Date
Monitor settings
Date imprint
Icons
All menu items can be displayed in a single page.
Menu names
Menu names
Menus
Menus
COOLPIX S610
COOLPIX S610c
102
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Camera Setup: The Setup Menu
c Welcome Screen
You can select the welcome screen to be displayed when the camera is turned on.
None (default setting)
Welcome screen is not displayed.
COOLPIX
Displays a welcome screen.
Select an image
Select a picture in the internal memory or on the memory card for the welcome
button.
As the selected image is stored in the camera, the image will appear in the welcome
screen even if the original picture is deleted.
103
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Camera Setup: The Setup Menu
d Date
Set the camera clock and choose home and travel destination time zones.
Date
Set camera clock to current date and time.
Use the following controls to set the date and time.
• J and K: highlight a different item (day, month, year, and the order in which day,
month, and year are displayed)
• H and I: edit the highlighted item
•
The k button: apply the setting
Time zone
w (home time zone) can be specified and daylight saving enabled or disabled from
Time zone options. When x (travel destination) is selected, the time difference
recorded. Useful when travelling.
Setting Travel Destination Time Zone
1
2
3
Use the rotary multi selector to choose Time
zone and press the k button.
Date
1 5 / 1 1 / 2 0 0 8 1 5 : 3 0
The time zone menu is displayed.
Date
Time zone
Choose x Travel destination and press the
k button.
Time zone
1 5 / 1 1 / 2 0 0 8 1 5 : 3 0
London,Casablanca
The date and time displayed on the monitor changes
according to the region currently selected.
Home time zone
Travel destination
Press K.
x
0 : 3 0
Tokyo
Seoul
+ 9 : 0 0
The time zone selection screen is displayed.
Back
104
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Camera Setup: The Setup Menu
4
Press J or K to choose the travel destination
time zone.
1 0 : 3 0
EST:
New York
Toronto
Lima
-
0 5 : 0 0
If the daylight saving time is in effect, press H to turn on
the daylight saving time option. When the option is
enabled, W is displayed at the top of the monitor, and
the time is advanced one hour.
Back
To turn off the daylight saving time option, press I.
Press the k button to choose the travel destination time zone.
While the travel destination time zone is selected, the Z icon will be displayed in the
monitor when the camera is in shooting mode.
B The Clock Battery
The clock battery charges when the main battery is installed or an AC adapter is connected, and can
provide several days of backup power after about 10 hours of charging.
C w (Home Time Zone)
• To switch to the home time zone, choose w Home time zone in step 2 and press the k button.
• To change the home time zone, choose w Home time zone in step 2 and perform step 3 and 4,
to set the home time zone.
C Daylight Saving Time
When daylight saving time starts or ends, turn the daylight saving time option on or off from the
time zone selection screen displayed in step 4.
105
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Camera Setup: The Setup Menu
The camera supports the time zones listed below. For time differences not listed below, set the
camera clock to local time.
UTC +/–
–11
Location
Midway, Samoa
UTC +/–
+1
Location
Madrid, Paris, Berlin
Athens, Helsinki, Ankara
–10
Hawaii, Tahiti
+2
Moscow, Nairobi, Riyadh,
Kuwait, Manama
–9
–8
–7
–6
Alaska, Anchorage
+3
+4
PST (PDT): Los Angeles,
Seattle, Vancouver
Abu Dhabi, Dubai
Islamabad, Karachi
New Delhi
MST (MDT): Denver, Phoenix,
La Paz
+5
CST (CDT): Chicago, Houston,
Mexico City
+5.5
EST (EDT): New York, Toronto,
Lima
–5
–4
–3
+6
+7
+8
Colombo, Dhaka
Bangkok, Jakarta
Caracas, Manaus
Beijing, Hong Kong,
Singapore
Buenos Aires, Sao Paulo
–2
–1
0
Fernando de Noronha
Azores
+9
Tokyo, Seoul
Sydney, Guam
New Caledonia
Auckland, Fiji
+10
+11
+12
London, Casablanca
106
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Camera Setup: The Setup Menu
e Monitor Settings
Choose whether or not to display information in the monitor, and set the monitor
brightness.
Photo info
Choose information displayed in the monitor during shooting and playback mode.
Brightness
Choose from five settings for monitor brightness. The default setting is 3.
5
and cannot be changed.
Photo Info
The following display options are available.
Shooting mode
Playback mode
15/11/20008 15:30
0004.JPG
Show info
16
4
4
Auto info
(default setting)
The current settings or operation guide is displayed as in Show info
above. After a few seconds, display will be the same as Hide info.
Hide info
107
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Camera Setup: The Setup Menu
C Date Imprint
Date and time of recording can be imprinted on pictures. This information can be
Off (default setting)
Date and time are not imprinted on pictures.
Date
Date is imprinted on the bottom right corner of pictures taken while this option is in
effect.
Date and time
Date and time are imprinted on the bottom right corner of pictures taken while this
option is in effect.
At settings other than Off, the icon for the current setting is displayed in the
B Date Imprint
• Imprinted dates form a permanent part of image data and cannot be deleted.
Choose N PC screen (1024) or larger when using date imprint.
• The date cannot be imprinted on movies or on pictures taken in Panorama assist scene mode
C Date Imprint and Print Set
When printing from DPOF-compatible printers which support printing of shooting date and photo
information, the date and information can be printed on pictures without date and time imprinted
108
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Camera Setup: The Setup Menu
g Vibration Reduction
Vibration reduction effectively corrects blur, caused by slight hand movement
known as camera shake, that commonly occurs when shooting with zoom applied
or at slow shutter speeds. Vibration reduction can be used in all shooting modes.
Set Vibration reduction to Off when using a tripod to stabilize the camera
during shooting.
When vibration reduction is enabled, the current setting is displayed during
shooting (when Off is selected, an icon for the current setting is not displayed)
On (default setting)
Vibration reduction is enabled when taking pictures and recording movies. Camera
detects and factors out panning movements when reducing camera shake. When
camera is panned horizontally, for example, vibration reduction reduces only
vertical shake. If camera is panned vertically, vibration reduction affects only
horizontal shake.
Off
Vibration reduction is not enabled.
B Notes on Vibration Reduction
• Vibration reduction may take a few seconds to activate after the power is turned on, or the camera
enters shooting mode from playback mode. Wait until the display stabilizes before shooting.
• Due to characteristics of the vibration reduction function, images displayed in the camera’s
monitor immediately after shooting may appear blurry.
• Vibration reduction may be unable to completely eliminate the effects of camera shake in some
situations.
• VR stands for vibration reduction.
109
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Camera Setup: The Setup Menu
U Motion Detection
Enable motion detection to reduce the effects of camera shake and subject
movement when shooting still pictures.
When motion detection is enabled, the current setting is displayed in the monitor
Auto (default setting)
When camera detects the movement of the subject or camera shake, the shutter
speed will be increased for reducing the effects of them.
However, motion detection does not function in the following situations.
•
•
When the flash fires
(auto) mode
•
Off
Motion detection is not enabled.
B Notes on Motion Detection
• Motion detection may be unable to completely reduce the camera shake and subject movement
in some situations.
• Motion detection may not function if the subject exhibits significant movement or is too dark.
• The pictures taken may become somewhat grainy.
h AF Assist
Enable or disable AF-assist illumination.
Auto (default setting)
AF-assist illumination will be used to assist the focus operation when the subject is
poorly lit. The illuminator has a range of about 3.0 m (9 ft. 10 in.) at the maximum
wide-angle position and about 1.5 m (4 ft. 11 in.) at the maximum telephoto
position. Note that for some scene modes, AF-assist illumination turns off
Off
Disable this function. The camera may be unable to focus if lighting is poor.
110
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Camera Setup: The Setup Menu
u Digital Zoom
Enable or disable digital zoom.
On (default setting)
When the camera is zoomed in to the maximum optical zoom position, holding
Off
Digital zoom will not be activated (except when shooting a movie).
B Notes on Digital Zoom
• Digital zoom cannot be used in the following situations.
- When Portrait or Night portrait is selected in scene mode
- When scene auto selector mode is selected
- When active child mode is selected
- When smile mode is selected
- Before movie recording begins (however, digital zoom of up to 2× can be applied while movies
are being recorded).
• When digital zoom is in effect, Metering is set to Center-weighted.
i Sound Settings
Adjust the following sound settings.
Button sound
Turn button sound On (default setting) or Off. When On (default setting) is
selected, beep will sound once when operations are completed successfully, twice
when the camera acquires focus on the subject, and three times when error is
detected. Start-up sound will also play when the camera is turned on.
Shutter sound
Choose shutter sound from On (default setting) or Off.
111
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Camera Setup: The Setup Menu
k Auto Off
If no operations are performed for the selected length of time, the monitor will
batteries. The power-on lamp blinks in standby mode. If no operations are
performed for another three minutes, the camera will turn off automatically.
Choose the time allowed to elapse before the camera enters standby mode if no
operations are performed from 30 s, 1 min (default setting), 5 min, and 30 min.
C Canceling Standby Mode
Cancel standby mode and reactivate the monitor by pressing the power switch or the shutter-
release button.
C Notes on Auto Off
Regardless of the option selected, the monitor will remain on as follows.
• When 30 s or 1 min is selected for Auto off and menus are displayed: three minutes
• During slide show playback: up to 30 minutes
• When the AC adapter is connected: 30 minutes
l
Format Memory/
m
Format Card
Use this option to format the internal memory or a memory card.
Formatting the Internal Memory
Format memory
To format the internal memory, remove the memory
card from the camera.
All images will
be deleted! OK?
The Format memory option appears in the setup
No
menu.
Format
Formatting a Memory Card
Format card
When the memory card is inserted in the camera, the
Format card option appears in the setup menu.
All images will
be deleted! OK?
No
Format
B Formatting Internal Memory and Memory Cards
• Formatting the internal memory or memory cards permanently deletes all data. Be sure to transfer
important pictures to a computer before formatting.
• Do not turn the camera off, disconnect the AC adapter, or open the battery-chamber/memory
card slot cover during formatting.
• The first time you insert the memory cards used in other devices into this camera, be sure to
format them with this camera.
Download from Www.Somanuals.com. All Manuals Search And Download.
112
Basic Camera Setup: The Setup Menu
n Language
Choose one of 24 languages for display of camera menus and messages.
Czech
Polish
Danish
Portuguese
Russian
German
(default setting)
Spanish
Greek
Finnish
Swedish
Turkish
French
Arabic
Indonesian
Italian
Simplified Chinese
Traditional Chinese
Japanese
Korean
Hungarian
Dutch
Norwegian
Thai
o Video Mode
Adjust settings for connection to TV.
Choose from NTSC and PAL.
p Reset All
When Reset is selected, the camera’s settings will be restored to their default
values.
Pop-up menu
Option
Default value
Auto
Off
Off
0.0
113
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Camera Setup: The Setup Menu
Scene mode
Option
Default value
Portrait
Center
Movie menu
Option
Default value
TV movie 640
Single AF
Shooting menu
Option
Default value
i Normal (3648)
Auto
Matrix
Single
Auto
Standard color
Auto
Single AF
Setup menu
Option
Default value
Text
None
Auto info
3
Off
On
Auto
Auto
On
On
On
1 min
114
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Camera Setup: The Setup Menu
Others
Option
Default value
Default
3 s
Off
memory. Numbering will continue from the lowest number available. To reset
• The following menu settings will remain unaffected when menus are reset with
Reset all.
r Firmware Version
View the current camera firmware version.
See the Wireless LAN Connection Guide for more information on the camera’s MAC
address displayed with the COOLPIX S610c.
COOLPIX S610
COOLPIX S610c
COOLPIX S610c Ver. 1.0
MAC address
COOLPIX S610 Ver. 1.0
xx-xx-xx-xx-xx-xx
Back
Back
Firmware version
MAC address
Firmware version
115
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical Notes
Optional Accessories
Rechargeable battery
Battery charger
AC adapter
Rechargeable Li-ion Battery EN-EL12
Battery Charger MH-65
AC Adapter EH-63
USB cable
USB Cable UC-E13
A/V Cable
Audio/Video Cable EG-CP15
Approved Memory Cards
The following Secure Digital (SD) memory cards have been tested and approved
for use in this camera. All cards of the designated make and capacity can be used,
regardless of speed.
1
2
2
2
2
SanDisk
128 MB, 256 MB, 512 MB, 1 GB, 2 GB , 4 GB , 8 GB
1
2
TOSHIBA
Panasonic
128 MB, 256 MB, 512 MB, 1 GB, 2 GB , 4 GB , 8 GB
1
2
128 MB, 256 MB, 512 MB, 1 GB, 2 GB , 4 GB , 8 GB
1
2
If the memory card will be used with a card reader or similar device, check that device
supports 2 GB cards.
SDHC-compliant. If the memory card will be used with a card reader or similar
device, check that device supports SDHC.
Operation is not guaranteed with other makes of card. Contact the manufacturer
for details on the above cards.
116
Download from Www.Somanuals.com. All Manuals Search And Download.
Image/Sound File and Folder Names
Pictures, movies, voice memos, and voice recordings are assigned file names as
follows.
DS CN 0001. J P G
Identifier
Extension
(not shown on camera monitor)
(signifies the file type)
Original still pictures (voice
memo attachment included),
movies, voice memos, voice
recordings
Still pictures
Movies
.JPG
.AVI
DSCN
Voice memos
Voice recordings
.WAV
Cropped copies (voice memo
attachment included)
RSCN
SSCN
FSCN
Small copies (voice memo
attachment included)
File number
(assigned automatically in ascending
order, starting with “0001”)
D-Lighting copies (voice
memo attachment included)
• Files are stored in folders named with a folder number followed by a five-
character identifier: “SOUND” (normal quality sound) for voice recordings (e.g.,
the number of files within a folder reaches 9999, a new folder will be created.
File numbers will be assigned automatically starting with “0001”.
• Voice memo file names have the same identifier and file number as the picture
to which the voice memo is attached.
• Files copied using Copy>Selected images or Copy sound files>Selected
files are copied to the current folder, where they are assigned new file numbers
in ascending order starting from the largest file number in memory. Copy>All
images and Copy sound files>Copy all files copy all folders from the source
medium; file names do not change but new folder numbers are assigned in
ascending order starting from the largest folder number on the destination
• A single folder can hold up to 200 pictures; if the current folder already contains
200 pictures, a new folder, named by adding one to the current folder name,
will be created the next time a picture is taken. If the current folder is numbered
999 and contains 200 pictures, or a picture is numbered 9999, no further
pictures can be taken until the internal memory or memory card is formatted
117
Download from Www.Somanuals.com. All Manuals Search And Download.
Caring for the Camera
To ensure continued enjoyment of this Nikon product, observe the following
precautions when using or storing the device.
B Keep Dry
The device will be damaged if immersed in water or subjected to high humidity.
B Do Not Drop
The product may malfunction if subjected to strong shock or vibration.
B Handle the Lens and all Moving Parts with Care
Do not apply force to the lens, lens cover, monitor, memory card slot or battery chamber. These
parts are easily damaged. Applying force to the lens cover could result in camera malfunction or
damage to the lens. Should the monitor break, care should be taken to avoid injury caused by
broken glass and to prevent the liquid crystal from the display touching the skin or entering the eyes
or mouth.
B Do Not Point the Lens at Strong Light Sources for Extended Periods
Avoid pointing the lens at the sun or other strong light sources for extended periods when using or
storing the camera. Intense light may cause deterioration of the image sensor, producing a white
blur effect in photographs.
B Keep Away from Strong Magnetic Fields
Do not use or store this device in the vicinity of equipment that generates strong electromagnetic
radiation or magnetic fields. Strong static charges or the magnetic fields produced by equipment
such as radio transmitters could interfere with the monitor, damage data stored on the memory
card, or affect the product’s internal circuitry.
B Avoid Sudden Changes in Temperature
Sudden changes in temperature, such as when entering or leaving a heated building on a cold day,
can cause condensation to form inside the device. To prevent condensation, place the device in a
carrying case or a plastic bag before exposing it to sudden changes in temperature.
B Turn the Product Off Before Removing or Disconnecting the Power Source
Do not remove the battery while the product is on, or while images are being recorded or deleted.
Forcibly cutting power in these circumstances could result in loss of data or in damage to product
memory or internal circuitry.
118
Download from Www.Somanuals.com. All Manuals Search And Download.
Caring for the Camera
C The Battery
16). Do not continue charging once the battery is fully charged, as this will result in reduced
battery performance. If possible, carry a fully-charged spare battery when taking pictures on
important occasions.
• Do not use the battery at ambient temperatures below 0 °C (32 °F) or above 40 °C (104 °F).
• Charge the battery indoors with an ambient temperature of 5 °C to 35 °C (41 °F to 95 °F) before
use.
- Charging the battery using the Battery Charger MH-65:
Charge capacity may be reduced at battery temperatures of 0 °C to 10 °C (32 °F to 50 °F) or 45 °C
to 60 °C (113 °F to 140 °F).
The battery will not charge if its temperature is below 0 °C (32 °F) or above 60 °C (140 °F).
- Charging the battery by connecting the AC Adapter EH-63 to the COOLPIX S610c:
Charging time may be increased at battery temperatures of 0 °C to 10 °C (32 °F to 50 °F).
Charge capacity may be reduced at battery temperatures of 45 °C to 60 °C (113 °F to 140 °F).
The battery will not charge if its temperature is below 0 °C (32 °F) or above 60 °C (140 °F).
• Note that the battery may become hot during use; wait for the battery to cool before charging.
Failure to observe these precautions could damage the battery, impair its performance or prevent
it from charging normally.
• On cold days, the capacity of batteries tends to decrease. Be sure that the battery is fully charged
before heading outside to take pictures in cold weather. Keep spare batteries in a warm place and
exchange as necessary. Once warmed, a cold battery may recover some of its charge.
• Dirt on the battery terminals can prevent the camera from functioning. Should the battery
terminals become dirty, wipe them off with a clean, dry cloth before use.
• When the battery is not in use, remove it from the camera or battery charger and replace the
terminal cover. The camera and battery charger draw minute amounts of current even when off; if
left in place, the battery could be drained to the point that it no longer functions. Turning the
camera on or off while the battery is exhausted can result in reduced battery life.
• Recharge it at least once every six months and run it flat before returning it to storage.
• If the battery will not be used for an extended period, store it in a cool (15 °C to 25 °C / 59 °F to
77 °F), dry place.
• Replace the battery when it no longer holds a charge. Used batteries are a valuable resource.
Please recycle used batteries in accordance with local regulations.
119
Download from Www.Somanuals.com. All Manuals Search And Download.
Caring for the Camera
Cleaning
Avoid touching glass parts with your fingers. Remove dust or lint with a blower
(typically a small device with a rubber bulb attached to one end that is
pumped to produce a stream of air out the other end). To remove fingerprints
or other stains that cannot be removed with a blower, wipe the lens with a soft
cloth, using a spiral motion that starts at the center of the lens and working
toward the edges. If this fails, clean the lens using a cloth lightly dampened
with commercial lens cleaner.
Lens
Remove dust or lint with a blower. To remove fingerprints and other stains,
clean the monitor with a soft, dry cloth, being careful not to apply pressure.
Monitor
Body
Use a blower to remove dust, dirt or sand then wipe gently with a soft, dry
cloth. After using the camera at the beach or seaside, wipe off any sand or salt
with a dry cloth lightly dampened with fresh water, then dry thoroughly. Note
that foreign matter inside the camera could cause damage not covered by the
warranty.
Do not use alcohol, thinner, or other volatile chemicals.
Storage
Turn the camera off when not in use. Check that the power-on lamp is off before
putting the camera away. Remove the battery if the camera will not be used for an
extended period. Do not store the camera with naptha or camphor moth balls, or
in any of the following locations:
• Next to equipment that produces strong electromagnetic fields, such as
televisions or radios
• Exposed to temperatures below –10 °C (14 °F) or above 50 °C (122 °F)
• Poorly ventilated or subject to humidities of over 60 %
To prevent mold or mildew, take the camera out of storage at least once a month.
Turn the camera on and release the shutter a few times before putting the camera
away again.
C Notes on the Monitor
• The monitor may contain a few pixels that are always lit or that do not light. This is a characteristic
common to all TFT LCD displays, and does not indicate a malfunction. Images recorded using the
product will not be affected.
• When framing bright subjects, vertical comet-like streaks that whiten toward either end may
appear in the display. This phenomenon, known as “smear,” does not appear in the final
photograph and does not indicate a malfunction. Some smear may appear in movies.
• Images in the monitor may be difficult to see under bright lighting.
• The monitor is lit by an LED backlight. Should the monitor begin to dim or flicker, contact your
Nikon-authorized service representative.
120
Download from Www.Somanuals.com. All Manuals Search And Download.
Error Messages
The following table lists the error messages and other warnings displayed in the
monitor, as well as the solutions for dealing with them.
For Users of the COOLPIX S610c
See the Wireless LAN Connection Guide for error messages that may be displayed
with use of the wireless LAN feature.
Display
O (blinks)
B
Problem
Clock not set.
Solution
Set clock.
A
Battery running low.
Prepare to charge or
change battery.
N
P
Battery exhausted.
Charge or change battery.
Battery
exhausted.
Battery temperature is
Turn off camera, and allow
battery to cool down
before resuming use. After
five seconds, this message
will disappear, the monitor
will turn off, and the
Battery temperature high.
high
power-on lamp will blink
rapidly. After the lamp
blinks for three minutes,
the camera will turn off
automatically, but you can
also press the power
switch to turn it off
manually.
Q (● blinks red)
Camera cannot focus.
Refocus.
u
Camera cannot perform
other operations until
recording is complete.
Wait until message clears
from display automatically
when recording is
Please wait for the
camera to finish
recording.
complete.
N
Write-protect switch is in
Slide write-protect to
“write” position.
Memory card is write “lock” position.
protected.
121
Download from Www.Somanuals.com. All Manuals Search And Download.
Error Messages
Display
Problem
Solution
A
P
Error accessing memory
•
•
Use approved card.
Check that connectors
are clean.
This card cannot be card.
used.
•
Confirm that memory
card is correctly inserted.
P
This card cannot be
read.
P
Memory card has not been Choose Yes and press k
Card is not formatted. formatted for use in this
to format card, or turn
camera off and replace
card.
Format card?
camera.
No
Yes
N
Memory card is full.
•
•
Choose smaller image
size.
Out of memory.
files.
•
•
Insert new memory card.
Remove memory card
and use internal
memory.
P
Error occurred while
recording picture.
Format internal memory or
memory card.
Image cannot be
saved.
Camera has run out of file
numbers.
•
•
Insert new memory card.
Format internal memory
or memory card.
Picture cannot be used for Choose a picture taken at
welcome screen.
any image mode setting
other than l 16:9 (3584)
and m 16:9 (1920), or a
small picture or cropped
copy of 640×480 pixels or
larger.
There is insufficient space
to save a copy.
Delete pictures from
destination.
P
Camera has run out of file
numbers.
•
•
Insert new memory card.
Format internal memory
or memory card.
Sound file cannot be
saved.
122
Download from Www.Somanuals.com. All Manuals Search And Download.
Error Messages
Display
Problem
Solution
A
N
N
Cannot edit selected
picture.
•
•
Select picture that
Image cannot be
modified.
supports D-Lighting,
crop, or small picture.
Movies cannot be
edited.
–
Time out error while
recording movie.
Choose memory card with
faster write speed.
Cannot record movie.
N
•
No pictures or sound file
in the internal memory
or memory card.
Memory contains no
–
–
images.
•
Memory card does not
contain pictures or
sound file.
To copy picture or sound
file from internal memory
to memory card, press the
d button. The copy
option screen or copy
sound file screen will be
displayed.
N
No sound file.
N
File not created with this
camera.
View file on computer or
other device.
File contains no image
data.
–
P
This file cannot be
played back.
N
Date and time are not set
for pictures to be displayed
by list by date mode.
All images are hidden.
–
–
N
Picture is protected.
Disable protection.
This image cannot be
deleted.
N
Destination in same time
zone as home.
Travel destination is in
the current time zone.
–
Lens error
Lens error.
Turn camera off and then
on again. If error persists,
contact retailer or Nikon
representative.
Q
P
USB cable disconnected
during printing.
Turn camera off and
reconnect cable.
Communications error
123
Download from Www.Somanuals.com. All Manuals Search And Download.
Error Messages
Display
Problem
Solution
A
System error
Error has occurred in
Turn camera off, remove
Q
camera’s internal circuitry. and reinsert battery, and
turn camera on. If error
persists, contact retailer or
Nikon representative.
PR
Printer error:
Check printer status.
Running out of ink or
printer error.
Check printer. After
checking the ink or solving
the problem, select
Resume and press the k
button to resume
–
printing.*
PR
Printer error: check
paper
Specified size of paper is
not loaded in printer.
Load the specified paper,
select Resume, and press
the k button to resume
printing.*
–
–
PR
Printer error: paper
jam
Paper has jammed in the
printer.
Eject the jammed paper,
select Resume, and press
the k button to resume
printing.*
PR
Printer error: out of
paper
No paper is loaded in
printer.
Load the specified paper,
select Resume, and press
the k button to resume
printing.*
–
–
–
–
PR
Ink error.
Check ink, select Resume,
and press the k button to
resume printing.*
Printer error: check ink
PR
Ink cartridge is empty.
Replace ink, select
Resume, and press the k
button to resume
printing.*
Printer error: out of ink
PR
Printer error: file
corrupt
An error caused by the
image file has occurred.
Select Cancel and press
the k button to cancel
printing.
* See the documentation provided with your printer for further guidance and information.
124
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
If the camera fails to function as expected, check the list of common problems
below before consulting your retailer or Nikon representative. Refer to the page
numbers in the right-most column for more information.
For Users of the COOLPIX S610c
See the Wireless LAN Connection Guide for information on troubleshooting wireless
LAN problems.
Display, Settings and Power Supply
Problem
Monitor is blank
Cause/Solution
A
•
•
•
Camera is off.
Battery is exhausted.
Standby mode for saving power: press the
shutter-release button halfway.
When flash lamp blinks red, wait until flash
has charged.
Camera and computer are connected via USB
cable.
•
•
•
Camera and TV are connected via audio/
video cable.
Monitor is hard to read
•
•
•
Adjust monitor brightness.
Monitor is dirty. Clean monitor.
Monitor has dimmed to save power. Monitor
brightens when controls are used.
Use monitor brightness boost.
•
Camera turns off without
warning
•
•
Battery is low.
Camera has turned off automatically to save
power.
•
•
Battery is cold.
Date and time of recording are
not correct
Pictures recorded before clock has been set,
and “Date not set” indicator blinks during
shooting, will have time stamp of “00/00/0000
00:00”; movies and voice recordings will be
dated “01/01/2008 00:00.”
•
Check camera clock regularly against more
accurate timepieces and reset as required.
No indicators displayed in
monitor
Hide info is selected for Photo info.
Select Show info.
125
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Problem
Date imprint not available
Cause/Solution
A
Camera clock has not been set.
18,
Date not appearing on pictures The date is not imprinted on movies or on
even when Date imprint is
pictures taken in Panorama assist scene mode.
enabled
Camera settings reset
Backup battery is exhausted; all settings were
restored to their default values.
Monitor turns off, and the
Battery temperature is high. Turn off camera,
power-on lamp blinks rapidly. and allow battery to cool down before resuming
use. After the lamp blinks for three minutes, the
camera will turn off automatically, but you can
also press the power switch to turn it off
manually.
Electronically Controlled Cameras
In extremely rare instances, unusual characters may appear in the monitor and the
camera may stop functioning. In most cases, this phenomenon is caused by a
strong external static charge. Turn the camera off, remove and replace the battery,
and then turn the camera on again. In the event of continued malfunction, contact
your retailer or Nikon representative. Note that disconnecting the power source as
described above may result in the loss of any data not recorded to internal
memory or the memory card at the time the problem occurred. Data already
recorded will not be affected.
Shooting
Problem
Cause/Solution
A
No picture taken when shutter-
release button is pressed
•
•
When camera is in playback mode, press the
c button.
When menus are displayed, press the d
button.
•
•
Battery is exhausted.
When flash lamp blinks, flash is charging.
Camera cannot focus
•
The intended subject is one with which
autofocus does not perform well.
Set AF assist in the setup menu to Auto.
Focus error. Turn camera off and then on
again.
•
•
126
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Problem
Cause/Solution
A
Pictures are blurred
•
•
•
•
Use flash.
Use D.
Use tripod and self-timer.
Bright specks appear in
pictures taken with flash
Flash is reflecting off particles in air. Turn flash
off.
Flash does not fire
•
•
Flash is off.
Some scene modes that cannot turn on flash
are selected.
• Dmode is selected.
•
Continuous or BSS is selected for
Continuous in shooting menu.
Optical zoom cannot be used Optical zoom cannot be used while recording
movies.
Digital zoom cannot be used
•
•
Digital zoom is set to Off in the setup menu.
Digital zoom is not available in the following
situations:
-
when shooting in Portrait or Night
portrait scene mode
-
when shooting in scene auto selector
mode
when shooting in active child mode
when shooting in smile mode
before movie recording begins
-
-
-
No sound when the shutter is
released
•
•
Off is selected for Sound settings>Shutter
sound in setup menu.
Continuous or BSS is selected for
Continuous in shooting menu.
• d(Sports scene mode) or l(Museum
scene mode) is selected.
• Dmode is selected.
•
The speaker is obstructed.
AF-assist illuminator does not
light
•
Off is selected for AF assist option in camera
setup menu.
some modes.
•
Pictures appear smeared
Colors are unnatural
Lens is dirty. Clean lens.
White balance does not match light source.
127
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Problem
Cause/Solution
A
Randomly spaced bright pixels Shutter speed too slow or ISO sensitivity is high.
(“noise”) appear in image
Noise can be reduced by:
•
•
•
Using flash
Specifying a lower ISO sensitivity setting
Using a scene mode which has noise
reduction ability
Pictures are too dark
(underexposed)
•
•
•
•
•
•
Flash is off.
Flash window is blocked.
Subject is beyond flash range.
Adjust exposure compensation.
Raise the ISO sensitivity.
Subject is backlit. Select o(Backlight scene
mode) or use fill flash.
Pictures are too bright
(overexposed)
Adjust exposure compensation.
Unexpected results when flash When V(auto with red-eye reduction) or “fill
mode is set to V(auto with flash with slow sync and red-eye reduction” of
red-eye reduction)
the Night portrait scene mode is applied
during shooting, In-Camera Red-Eye Fix may, in
very rare cases, be applied to areas not affected
by red-eye. Set a flash mode other than V
(auto with red-eye reduction) and select a scene
mode other than Night portrait, then shoot.
Playback
Problem
Cause/Solution
A
File cannot be played back
File has been overwritten or renamed by
computer or another make or model of camera.
–
Cannot zoom in on picture
Cannot record voice memo
Playback zoom cannot be used with movies,
small pictures, or cropped copies smaller than
320 × 240 pixels.
–
•
•
Voice memos cannot be appended to
movies.
Voice memos cannot be appended to
pictures taken by other cameras, and voice
memos attached to the images using other
cameras cannot be played back.
128
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Problem
Cause/Solution
A
Cannot use D-Lighting, crop, or
small picture options
•
•
These options cannot be used with movies.
Choose a picture taken at any image mode
setting other than l 16:9 (3584) and m
16:9 (1920).
•
•
•
Select picture that supports D-Lighting, crop,
or small picture.
Pictures taken with another make or model of
camera cannot be edited.
Other cameras may be unable to play back, or
transfer to a computer, pictures edited with
this camera.
Pictures not displayed on
television
•
•
Choose correct video mode.
Memory card contains no pictures. Replace
memory card. Remove memory card to play
back pictures from internal memory.
Nikon Transfer does not start
when camera is connected
•
•
•
•
Camera is off.
Battery is exhausted.
USB cable is not correctly connected.
If your computer is running Windows 2000
Professional, camera cannot be connected to
the computer.
•
•
Camera is not recognized by the computer.
Computer is not set to launch Nikon Transfer
automatically.
–
–
For more information on Nikon Transfer, refer to
help information contained in Nikon Transfer.
Pictures to be printed are not
displayed
Memory card contains no pictures. Replace
memory card. Remove memory card to print
pictures from internal memory.
Cannot select paper size with
camera
the printer does not support the paper sizes used
by the camera or the printer automatically selects
the page size. Use the printer to select page size.
129
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Nikon COOLPIX S610/S610c Digital Camera
Type
Compact digital camera
10.0 million
/2.33-in. CCD; total pixels: approx. 10.34 million
Effective pixels
Image sensor
Lens
1
4× optical zoom, NIKKOR lens
Focal length
5-20mm (equivalent with 35mm [135] format picture angle:
28-112mm)
f/-number
Construction
Digital zoom
f/2.7–5.8
7 elements in 6 groups
Up to 4× (equivalent with 35mm [135] format picture angle:
approx. 448mm)
Vibration reduction
Autofocus (AF)
Lens shift
Contrast-detect AF
•
•
[W]: 50 cm (1 ft. 8 in.) to ∞, [T]: 60 cm (2 ft.) to ∞
Macro mode: 3 cm (1.2 in.) to ∞(when the zoom indicator is
before G)
Focus range (from
lens)
Focus-area selection
Monitor
Auto (9-area automatic selection), face priority, manual with
99 focus areas, center
3-in., Approx. 230k-dot, TFT LCD with anti-reflection coating
and 5-level brightness adjustment (equipped with monitor
brightness boost function)
Frame coverage
(shooting mode)
Approx. 100 % horizontal and 100 % vertical
Frame coverage
(playback mode)
Approx. 100 % horizontal and 100 % vertical
Storage
Media
•
•
Internal memory (approx. 45 MB)
SD (Secure Digital) memory cards
File system
File formats
DCF, Exif 2.2, and DPOF compliant
Compressed: JPEG-Baseline compliant
Movies: AVI
Sound files: WAV
Image size (pixels)
•
•
•
•
•
•
•
•
3,648 × 2,736 High (3648P)/Normal (3648)
3,072 × 2,304 Normal (3072)
2,592 × 1,944 Normal (2592)
2,048 × 1,536 Normal (2048)
1,024 × 768 PC screen (1024)
640 × 480 TV screen (640)
3,584 × 2,016 16:9 (3584)
1,920 × 1,080 16:9 (1920)
ISO sensitivity
ISO 100, 200, 400, 800, 1600, 3200
(Standard output sensitivity) Auto (auto gain from ISO 100 to 1600)
130
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Exposure
Metering
224-segment matrix, center-weighted
Exposure control
Programmed auto exposure with motion detection and
1
exposure compensation (–2.0 to +2.0 EV in steps of /3 EV)
Range
(ISO 100)
[W]: –1.0 to +15.5 EV
[T]: 1.2 to 17.7 EV
Shutter
Mechanical and charge-coupled electronic shutter
1
Speed
/1500–1 s, 4 s (Fireworks show scene mode)
Electronically-controlled ND filter (-2 AV) selection
2 steps (f/2.7 and f/5.4 [W])
Aperture
Range
Self-timer
Built-in flash
Range (approx.)
Can be selected from 10 and 2 seconds duration
[W]: 0.5 to 8.0 m (1.6 to 26.2 ft.)
(ISO sensitivity: Auto) [T]: 0.5 to 3.5 m (1.6 to 11.4 ft.)
Flash control
Interface
TTL auto flash with monitor preflashes
Hi-Speed USB
Data transfer protocol MTP, PTP
Video output
I/O terminal
Can be selected from NTSC and PAL
Multi connector
Supported
languages
Arabic, Chinese (Simplified and Traditional), Czech, Danish,
Dutch, English, Finnish, French, German, Greek, Hungarian,
Indonesian, Italian, Japanese, Korean, Norwegian, Polish,
Portuguese, Russian, Spanish, Swedish, Thai, Turkish
Power sources
•
•
One EN-EL12 Rechargeable Li-ion Battery (supplied)
AC Adapter EH-63
*
Battery life
Approx. 290 shots (EN-EL12)
COOLPIX S610: Approx. 94 × 57 × 22.5 mm (3.7 × 2.2 × 0.9 in.)
(excluding projections)
COOLPIX S610c: Approx. 96.5 × 57 × 22.5 mm (3.8 × 2.2 ×
0.9 in.) (excluding projections)
Dimensions
(W × H × D)
COOLPIX S610: Approx. 125 g (4.4 oz) (without battery and SD
memory card)
COOLPIX S610c: Approx. 130 g (4.6 oz) (without battery and SD
memory card)
Weight
Operating environment
Temperature
0 to 40 °C (32 to 104 °F)
Humidity
Less than 85 % (no condensation)
131
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Wireless
(COOLPIX S610c only)
IEEE 802.11b/g (standard wireless LAN protocol), ARIB STD-T66
(standard for low power data communications systems)
Standards
Communications
protocols
IEEE 802.11g: OFDM
IEEE 802.11b: DSSS
Operating frequency
2412–2462 MHz (11 channels)
IEEE 802.11g: 6, 9, 12, 18, 24, 36, 48, and 54 Mbps
IEEE 802.11b: 1, 2, 5.5, and 11 Mbps
Data rates
Security
TKIP, 128/64-bit (104/40-bit) WEP, AES
Infrastructure
Access protocols
• Unless otherwise stated, all figures are for a camera with a fully-charged
Rechargeable Li-ion Battery EN-EL12 operated at an ambient temperature of
25 °C (77 °F).
* Based on Camera and Imaging Products Association (CIPA) standards for measuring the life
of camera batteries. Measured at 23 °C (73 °F); zoom adjusted with each shot, flash fired
with every other shot, image mode set to i Normal (3648).
Battery life may vary depending on shooting interval and length of time menus and images
are displayed.
Rechargeable Li-ion Battery EN-EL12
Type
Rechargeable lithium-ion battery
DC 3.7 V, 1050 mAh
Rated capacity
Operating temperature
Dimensions (W × H × D)
Weight
0 to 40 °C (32 to 104 °F)
Approx. 32 × 43.8 × 7.9 mm (1.3 × 1.7 × 0.3 in.)
Approx. 22.5 g (0.8 oz) (excluding terminal cover)
Battery Charger MH-65 (supplied with the COOLPIX S610)
Rated input
AC 100-240 V, 50/60 Hz, 0.08-0.05 A
8–12 VA
Rated capacity
Rated output
DC 4.2 V, 0.7 A
Supported batteries
Charging time
Nikon Rechargeable Li-ion Battery EN-EL12
Approx. 150 minutes when battery is fully discharged
0 to 40 °C (32 to 104 °F)
Operating temperature
Dimensions
(W × H × D)
Approx. 58 × 27.5 × 80 mm (2.3 × 1.1 × 3.1 in.)
(excluding projections)
Length of power cable
Weight
Approx. 1.8 m (6 ft.)
Approx. 70 g (2.5 oz) (excluding power cable)
Download from Www.Somanuals.com. All Manuals Search And Download.
132
Specifications
AC Adapter EH-63 (supplied with the COOLPIX S610c)
Rated input
AC 100–240 V, 50/60 Hz, 0.18–0.1 A
18–22 VA
Rated capacity
Rated output
DC 4.8 V, 1.5 A
Operating temperature
0 to 40 °C (32 to 104 °F)
Dimensions
Approx. 41 × 23.5 × 79 mm (1.6 × 0.9 × 3.1 in.)
(excluding projections)
(
W × H × D)
Length of connection
cord
Approx. 1.7 m (5 ft. 7 in.)
Length of power cable
Weight
Approx. 1.8 m (6 ft.)
Approx. 110 g (3.9 oz) (excluding power cable)
B Specifications
Nikon will not be held liable for any errors this manual may contain. The appearance of this product
and its specifications are subject to change without notice.
Supported Standards
•
•
•
DCF: Design Rule for Camera File System is a standard widely used in the digital
camera industry to ensure compatibility among different makes of camera.
DPOF: Digital Print Order Format is an industry-wide standard that allows
pictures to be printed from print orders stored on the memory card.
Exif version 2.2: This camera supports Exif (Exchangeable Image File Format
for Digital Still Cameras) version 2.2, a standard that allows information stored
with photographs to be used for optimal color reproduction when images are
output from Exif-compliant printers.
•
•
PictBridge: A standard developed cooperatively by the digital camera and
printer industries, allowing photographs to be output directly to a printer
without connecting the camera to a computer.
Wi-Fi Protected Setup (WPS): A standard that simplifies home connection
and security of wireless devices.
Download from Www.Somanuals.com. All Manuals Search And Download.
133
Index
N
I
P
J
L
M
R
S
135
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
T
U
V
Voice recordings
W
Z
136
Download from Www.Somanuals.com. All Manuals Search And Download.
137
Download from Www.Somanuals.com. All Manuals Search And Download.
138
Download from Www.Somanuals.com. All Manuals Search And Download.
No reproduction in any form of this manual, in whole or in part
(except for brief quotation in critical articles or reviews), may be
made without written authorization from NIKON CORPORATION.
YP8G01(11)
Download from Www.Somanuals.com. All Manuals Search And 6DMowMnlAoa8d9.11-01
|