Return
to Menu
IP Phone 2004 User Guide
BCM50 2.0
Business Communications Manager
Document Status: Standard
Document Version: 02.01
Document Number: NN40050-108
Date: September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Information area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
About your programmable buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Telephone setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Display contrast level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Basic call features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Make a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Answer calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Handsfree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Mute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Call log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Program memory buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
IP Phone 2004 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Contents
NN40050-108
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Chapter 1
Getting started
The BCM50 2.0 IP Phone 2004 brings voice and data to your desktop.
Introduction
This guide contains information about:
•
•
•
•
•
•
•
telephone buttons and lights
telephone display
telephone setup
how to make and answer calls
how to use the navigation buttons
how to program memory buttons
how to offset the time on your telephone display
Figure 1 shows the IP Phone 2004.
Figure 1 IP Phone 2004
IP Phone 2004 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Chapter 1 Getting started
IP Phone 2004 button and light descriptions
Figure 2 shows the IP Phone 2004 lights and buttons.
Figure 2 IP Phone 2004 buttons
M
A
B
L
L
K
J
D
C
Q
G
R
I
E
P
F
N
O
H
Table 1 shows a description of the lights and buttons.
Table 1 IP Phone 2004 buttons and descriptions
Hold button
A
Places an active call on hold.
Goodbye button
B
Ends an active call.
Handsfree button with LED
C
Turns on the Handsfree mode.
Volume control bar
D
E
F
Adjusts the handset, Handsfree, headset, and ringer volume.
Mute button with LED
Turns the microphone off and on when you are on a call.
Headset button with LED
Turns on the headset mode.
Mailbox in button (programmable memory button #08
G
Opens your CallPilot mailbox. For more information about mailbox
options, refer to your CallPilot Quick Reference Card.
NN40050-108
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1 Getting started
7
Leave Message button (programmable memory button #09)
H
I
Enables you to send voice mail messages. For more information on
voice mail messaging, refer to your CallPilot Quick Reference Card.
Navigation cluster buttons
Enables you to view items stored in your Call Log. For more information
Feature
J
Feature button
Starts or ends a feature.
Display buttons
K
L
Shows feature options.
Line and Memory buttons
For more information on line and memory buttons, refer to “Program
Telephone light
M
Flashes when a call rings at the telephone.
Lights up when Message for you appears on the display.
Programmable memory button #07
N
O
(Default: Blank)
Default Services button (programmable memory button #10)
Default access to scrollable feature display menu, including the hot
desking feature.
Programmable memory button #11
Q
R
(Default: Blank)
Programmable memory button #12
(Default: Blank)
The following buttons are reserved for future development.
PC Expansion button
P
IP Phone 2004 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Chapter 1 Getting started
IP Phone 2004 display
There are three areas to the IP Phone 2004 display:
•
•
•
button label area
information area
feature options area
Figure 3 shows an example of the display and describes each area.
Figure 3 Display area
Call fwd
Page gen
Intercom
Intercom
Button label area
Information area
Conference
Last num
DN: 340
Nortel Networks
April 25 10:51 am
Feature options area
Feature
Button label area
The button label area shows the label and status of the six programmable memory buttons. For
Note: Dial pad buttons N, G, H, O and Q also can be programmed as memory buttons.
Information area
The Information area shows:
•
•
•
the extension number of the telephone (DN: 340)
a line for general information (Nortel Networks)
the date and time when the telephone is not in use, and changes to show features and call
information when the telephone is in use
NN40050-108
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1 Getting started
9
Feature options area
When a feature is activated, or when you are on an active call, the display command line shows
you the action you must take to proceed.
For example: Pswd. This means you must enter your mailbox password.
The Feature options area shows the label for the FEATURE button, and for the three display buttons.
These button labels appear in capital letters directly above the Feature and display buttons, and to
the right of the FEATURE label on the display. These button labels vary depending on the feature in
use.
About your programmable buttons
Your System Administrator assigns the six programmable buttons as line, intercom, or memory
buttons. The label for each button appears on the display next to the button. For more information,
see your System Administrator.
Telephone setup
This section describes the IP Phone 2004 display features:
•
•
•
Display contrast
Language choice
Ring type
Note: For more information about the features available on your
telephone and how to use them, refer to the BCM50 2.0 Telephone
Features User Guide (NN40020-100).
Display contrast level
Adjust the contrast for the telephone display.
1
2
3
Press Feature *7.
Press DOWN and UP to view the levels.
Press OK to select a level.
Language choice
To select the Primary Language for the telephone display:
1
2
3
Press Feature *501. Select the Alternate Language for the telephone display.
Press Feature *502. Select the Alternate Language 2 for the telephone display.
Press Feature *503. Select the Alternate Language 3 for the telephone display.
IP Phone 2004 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
10 Chapter 1 Getting started
4
Press Feature *504. Select the Alternate Language 4 for the telephone display.
Ring type
To select a different ring type for your telephone:
1
2
3
Press Feature *6.
Press 1, 2, 3, 4, or NEXT or to hear the different ring types.
Press OK to store the ring type.
NN40050-108
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Chapter 2
Features and buttons
This section describes some of the IP Phone 2004 buttons and call features:
•
•
•
basic call features
navigation buttons
memory buttons
Note: For more information about the features available on your telephone
and how to use them, refer to the BCM50 2.0 Telephone Features User Guide
(NN40020-100).
Basic call features
You can make external and internal calls using the following features:
make a call
answer a call
•
•
•
•
•
•
•
hold a call
Handsfree
headset
Mute
Time Offset
Make a call
There are many ways to make a call depending on your telephone programming and the type of
call.
To make external calls using line buttons:
1
2
3
Lift the handset.
Press a line button.
Dial the external telephone number.
To make external calls using intercom buttons:
1
2
Lift the handset.
Press an intercom button, and enter a line pool access code.
IP Phone 2004 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
12 Chapter 2 Features and buttons
3
When you hear an external dial tone, dial the external telephone number.
Note: Contact your System Administrator for a list of line pool codes. When
entering a line pool access code on PRI lines, you do not hear dial tone.
To make internal calls using intercom buttons:
1
2
3
Lift the handset.
Press an intercom button.
Dial the extension number.
Note: Contact your System Administrator for a list of extension numbers.
Answer calls
When your telephone rings, and the light flashes, or an intercom or line button indicator flashes:
•
lift the handset.
OR
•
press the line or intercom button with the flashing
indictor before you lift the handset.
Hold
•
•
•
Calls are put on hold automatically when you switch from one line to another.
While on a call, press . The indicator for the line on hold flashes.
To retrieve a held call, press the line button with the flashing indicator.
Handsfree
Your System Administrator must program the Handsfree feature to your telephone.
•
•
Press
to make or answer a call.
To switch to Handsfree when you are on a handset call, press
and replace the handset. Lift
the handset to switch back.
•
To switch to Handsfree when you are on a headset call, press . Press to switch back.
Headset
You must have a headset installed on your telephone to use this feature.
Press to activate the headset mode. When the light is on, press a line or
intercom button to make a call.
•
NN40050-108
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2 Features and buttons 13
•
•
To switch to your headset when you are on a handset call, press
handset. Lift the handset to switch back.
and replace the
To switch to your headset when you are on a Handsfree call, press
back.
. Press
to switch
Mute
•
While on a call, press
microphone is off.
to turn off the microphone. The
button lights when the
•
•
Press
Use
again to turn on the microphone.
on handset, Handsfree, or headset calls.
Time offset
When your IP Phone 2004 is located in a different time zone from your system, the display shows
the system time, not the local time. The Time Offset feature enables you to adjust the time that
appears on the display.
Before you begin, calculate the time difference, in hours, between the server time and local time.
To change the time that appears on your telephone display to
local time:
1
2
3
4
Press Feature *510.
Press CHANGE.
Press * to switch between adding or subtracting time.
Using the dialpad, enter the number of hours between local time and system time.
Note: Press # to enter half hour increments.
Press OK.
5
Note: It may take up to one minute for the change to appear on the display.
Navigation buttons
Use the Navigation buttons to scroll through or make changes to your call log.
1
Press Feature 812.
Call log
Call log displays use the following special characters:
IP Phone 2004 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
14 Chapter 2 Features and buttons
1 (underline) identifies a new item
¯ identifies answered calls
§ identifies long distance calls
/ identifies that the information has been shortened
To view your Call Log:
1
Press
Press
Press
Press
Press
to view old items.
to view new items.
to return to the last viewed item.
2
3
and
and
to move through your items.
to view more information on an item.
To erase a Call Log entry:
1
Press
while viewing an item.
To return a call from your Call Log:
1
2
Display the desired number on your telephone.
Edit the number, if required. You can add numbers for long-distance dialing or line pool
access, or you can remove numbers using
and
.
3
4
Press a line button.
Lift the handset.
Memory buttons
This section contains information about the IP Phone 2004 memory buttons and how to use them.
These are buttons not assigned as line or intercom buttons. Memory buttons store internal and
external numbers or features to give you one-touch dialing or feature activation. Refer to “IP
Program memory buttons
You can program a memory button with a new number or feature.
To program external autodial:
1
2
3
Press Feature *1.
Press a memory button.
Dial the external number.
NN40050-108
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2 Features and buttons 15
4
Press OK to store the number.
To program internal autodial:
1
2
3
4
Press Feature *2.
Press a memory button.
Dial the extension number.
Press OK to store the number.
To use features:
1
2
3
4
Press Feature *3.
Press a memory button.
Press Feature and enter the feature code.
Press OK to store the feature code.
To erase memory buttons:
1
2
3
Press Feature *1.
Press a memory button.
Press OK to erase the button.
IP Phone 2004 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
16 Chapter 2 Features and buttons
NN40050-108
Download from Www.Somanuals.com. All Manuals Search And Download.
|