Model No. NTS5925.0
Serial No.
USER’S MANUAL
Write the serial number in the
space above for future reference.
Serial Number Decal
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or if a part is
damaged or missing, PLEASE
CONTACT OUR CUSTOMER
SERVICE DEPARTMENT
DIRECTLY.
CALL TOLL-FREE:
1-888-825-2588
Mon.–Fri., 6 a.m.–6 p.m. MST
ON THE WEB:
CAUTION
Visit our website at
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
new products, prizes,
fitness tips, and much more!
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNING DECAL PLACEMENT
The decal shown here has been placed on
the resistance system. If the decal is missing
or illegible, please call the toll-free telephone
number on the front cover of this manual
and order a free replacement decal. Apply
the decal in the location shown.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT PRECAUTIONS
WARNING:
To reduce the risk of serious injury, read the following important precautions
before using the resistance system.
1. Read all instructions in this manual and all
warnings on the resistance system before
using the resistance system. Use the resist-
ance system only as described in this manu-
al.
ly. Replace any worn parts immediately.
8. Always make sure that the pins and knobs
are fully engaged before using the resistance
system.
2. It is the responsibility of the owner to ensure
that all users of the resistance system are
adequately informed of all precautions.
9. Always wear athletic shoes for foot protec-
tion while exercising.
10. The resistance system is designed to support
a maximum user weight of 300 pounds.
3. The resistance system is intended for home
use only. Do not use the resistance system in
any commercial, rental, or institutional set-
ting.
11. Make sure that the cables remain on the pul-
leys at all times. If the cables bind as you are
exercising, stop immediately and make sure
that the cables are on the pulleys. Replace all
cables at least every two years.
4. Keep the resistance system indoors, away
from moisture and dust. Place the resistance
system on a level surface, with a mat beneath
it to protect the floor or carpet. Make sure
that there is enough clearance around the
resistance system to mount, dismount, and
use the resistance system.
12. The resistance system is designed to be used
with the included resistance. Do not use the
resistance system with dumbbells or any other
type of weight to increase the resistance.
5. Inspect and properly tighten all parts regular- 13. Always make sure the screws in the cable
ly. Replace any worn parts immediately.
clamps are fully tightened.
6. Keep children under 12 and pets away from
the resistance system at all times.
14. If you feel pain or dizziness at any time while
exercising, stop immediately and begin cool-
ing down.
7. Inspect and properly tighten all parts regular-
WARNING:
Before beginning this or any exercise program, consult your physician. This
is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using. ICON assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE YOU BEGIN
Thank you for selecting the versatile NordicTrack®
after reading this manual, see the front cover of this
E500 resistance system. The resistance system offers a manual.To help us assist you, please note the product
selection of exercise stations designed to develop every model number and serial number before calling. The
major muscle group of the body. Whether your goal is to model number is NTS5925.0. The serial number can be
tone your body, build dramatic muscle size and
strength, or improve your cardiovascular system, the
resistance system will help you to achieve the specific
results you want.
found on a decal attached to the exercise rack (see the
front cover of this manual).
Before reading further, please review the drawing below
and familiarize yourself with the parts that are labeled.
For your benefit, read this manual carefully before
using the resistance system. If you have questions
ASSEMBLED DIMENSIONS:
Height: 82 in. / 208 cm
Width: 35 in. / 89 cm
Depth: 54 in. / 137 cm
Pull-up Handle
Arm Pad
Right Side
Headrest
Dip Arm
Adjustment Pin
Backrest
Console
Curl Pad
Left Side
Seat
Leg Lever
Wheel
Note: The terms “right side” and
“left side” are determined relative
to a user with his back to the
backrest; they do not correspond
to right and left on the drawings in
this manual.
Base
5
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY
• As you assemble the exercise rack, make sure all
parts are oriented as shown in the drawings.
Make Things Easier for Yourself
Everything in this manual is designed to ensure
that the resistance system can be assembled
successfully by anyone. However, the resistance
system has many parts and the assembly
process will take time. By setting aside plenty of
time, assembly will go smoothly.
• For help identifying small parts, use the PART
IDENTIFICATION CHART.
In addition to the included hex key(s)
and grease, assembly may require the following
tools (not included):
• Two adjustable wrenches
• One rubber mallet
Before beginning assembly, carefully read the
following information and instructions:
• One standard screwdriver
• Assembly requires two persons.
• One Phillips screwdriver
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.
• Lubricant, such as grease or petroleum jelly,
and soapy water
• Tighten all parts as you assemble them, unless
instructed to do otherwise.
Assembly will be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.
1. Press two Base Caps (62) onto the Base (1).
1
62
1
62
2. Attach a Wheel (60) to a Wheel Endcap (61) with
an M6 Bolt Set (79).
2
60
79
Attach the Wheel Endcap (61) to the Base (1)
with two M4 x 20mm Self-tapping Screws (94).
79
94
Attach a Base Foot (68) to the Base (1) with an
M4 x 20mm Self-tapping Screw (94).
1
61
Repeat this step for the other side of the Base
(1).
94
68
94
6
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Attach the Upright Base (2) to the Base (1) with
four M10 x 60mm Bolts (80), four M10 Washers
(91), and four M10 Nylon Locknuts (74). Do not
tighten the Locknuts yet.
3
2
74
74
1
91
80
91
80
4. Attach the Upright (3) to the Upright Base (2) with
five M10 x 25mm Button Bolts (99) and five M10
Washers (91).
4
3
91
99
91
99
2
91
99
91
7
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Orient the Backrest (16) as shown. Attach the
Backrest to the Upright Base (2) and the Upright
(3) with two M6 x 100mm Screws (71) and two
M6 Washers (85).
5
71
85
16
3
71
85
Wide
End
2
6. Attach the Center Cover (59) to the Front Mech
Cover (13) with two M4 x 20mm Self-tapping
Screws (94).
6
94
59
13
94
7. Set the Mech Frame (10) on the Base (1).
7
10
109
Attach the Mech Frame (10) to the Upright Base
(2) with an M12 x 30mm Bolt (109). Do not tight-
en the Bolt yet.
Tip the resistance system onto its side. Attach the
Mech Frame (10) to the Base (1) with four M10
Nylon Locknuts (74).
Tighten the M12 x 30mm Bolt (109). Tighten
the M10 Nylon Locknuts (74) used in step 3.
74
2
1
74
8
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Attach a Pull-up Handle (18) to the Top Frame (4)
with four M10 x 20mm Button Bolts (83) and four
M10 Washers (91).
8
83
4
91
Slide a Top Arm Cap (20) over the Pull-up Handle
(18) and onto the Top Frame (4).
83
Press a 32mm Round Outer Cap (22) onto the
Pull-up Handle (18). Tighten an Eyebolt (23) into
the Pull-up Handle.
91
83
91
22
18
83
20
Repeat this step on the other side of the Top
Frame (4).
23
9. Attach the Upright Cap (21) to the Top Frame (4)
with an M4 x 20mm Self-tapping Screw (94) and
an M4 Washer (36).
9
94
36
4
21
Attach the Top Frame (4) to the Upright (3) with
two M10 x 98mm Button Bolts (98), four M10
Washers (91), and two M10 Nylon Locknuts (74).
91
74
91
91
98
91
3
10. Attach the Headrest (17) to the Upright (3) with
two M6 x 100mm Screws (71) and two M6
Washers (85).
10
85
17
3
71
85
9
Download from Www.Somanuals.com. All Manuals Search And Download.
11. Grease an M10 x 217mm Bolt (73). Attach the Dip
Arm (5) to the Upright (3) with the Bolt and an M10
Nylon Locknut (74). Do not overtighten the
Locknut; the Dip Arm must be able to pivot
easily.
11
Attach the Pin (58) to the Upright (3) with an M4 x
20mm Self-tapping Screw (94). Insert the Pin into
the Upright.
3
5
74
73
58
Grease
94
12. Wet the inside of the two Large Foam Pads (24)
and the Dip Arm (5) with soapy water. Slide the
two Large Foam Pads onto the Dip Arm.
12
5
24
65
Slide a Dip Arm Cap (65) onto a Dip Handle (11).
Attach the Dip Handle and the Dip Arm Cap to
the Dip Arm (5) with an M10 x 80mm Button
Screw (77) and an M10 Washer (91).
91
77
Attach the other Dip Handle (11) and Dip Arm
Cap (65) to the Dip Arm (5) in the same manner.
24
11
13. Attach the Seat (15) to the Seat Frame (6) with
four M6 x 16mm Screws (72).
13
15
6
72
72
10
Download from Www.Somanuals.com. All Manuals Search And Download.
14. Grease an M10 x 72mm Bolt (101). Attach the
Leg Lever (8) to the Seat Frame (6) with the Bolt
and an M10 Nylon Locknut (74). Do not over-
tighten the Locknut; the Leg Lever must be
able to pivot easily.
14
Grease
101
8
74
6
15. Slide two Small Foam Pads (25) onto the Leg
Lever (8). Press two Endcaps (57) onto the Leg
Lever.
15
57
Repeat this step with the Seat Frame (6).
6
25
25
8
57
16. Set the Seat Frame (6) on the Upright Base (2).
16
6
2
17. Attach the Curl Pad (29) to the Curl Post (9) with
two M6 x 16mm Screws (72).
17
29
9
18. Make sure that all parts have been properly
tightened before the resistance system is
used.
72
11
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUSTMENTS
This section explains how to adjust the resistance system. See the EXERCISE GUIDELINES on page 16 for
important information about how to get the most benefit from your exercise program. Also, refer to the accompa-
nying exercise guide to see the correct form for each exercise.
Make sure all parts are properly tightened each time the resistance system is used. Replace any worn parts
immediately. The resistance system can be cleaned with a damp cloth and a mild, non-abrasive detergent. Do
not use solvents.
ATTACHING THE PULLEY HOUSINGS
A
23
26
Attach the end of a Housing Cable (19) without the
ball, to the Mech Rope (56) with a Cable Clip (49).
Repeat with the other Housing Cable.
2
26
Ball
To use the high pulley station, hook the Pulley
Housings (26) onto the Eyebolts (23).
B
C
See inset drawing A. To use the leg lever, hook the
Pulley Housings (26) to the hook in the Upright Base
(2).
26
1
See inset drawing B. To use the curl bar, hook the
Pulley Housings (26) to the hook in the middle of the
Base (1).
See inset drawing C. To use the squat bar, hook the
Pulley Housings (26) to the hooks on the sides of the
Base (1).
56
1
19
26
49
ATTACHING THE ACCESSORIES
Attach a Handle (33) to a Housing Cable (19) with a
Cable Clip (49). For some exercises, an Extension
Strap (32) should be attached between the Handle
and the Cable with two Cable Clips.
19
49
The Squat Bar (not shown) or the Ankle Strap (not
shown) can be attached at any pulley station in the
same manner.
32
49
33
12
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUSTING THE DIP ARM
To perform some exercises, the Dip Arm (5) should
be locked in the up position. Remove the Pin (58) and
lift the Dip Handle (11). Engage the Pin into the
Upright (3) and the hole in the Dip Arm plate.
3
5
Hole
To use the Dip Arm (5), remove the Pin (58) and
lower the Dip Handle (11). Insert the Pin into the
Upright (3).
58
11
ATTACHING THE SEAT FRAME
The Seat Frame (6) can be adjusted to any of four
heights. To attach the Seat Frame to the resistance
system, set the hooks on the Seat Frame over a set
of tubes on the Upright Base (2).
Hook
Store the Seat Frame (6) away from the resistance
system when performing an exercise that does not
require it.
2
6
Tube
ATTACHING THE LEG LEVER
To use the Leg Lever (8), attach the Pulley Housing
(26) to the Upright Base (2) as described in ATTACH-
ING THE PULLEY HOUSINGS on the previous page.
Attach the Housing Cables (19) to the Leg Lever with
two Cable Clips (49).
8
To use the Curl Bar (28), attach the Pulley Housing
(26) to the Base (1) as described in ATTACHING THE
PULLEY HOUSINGS on the previous page. Attach
the Housing Cables (19) to the Leg Lever with two
Cable Clips (49).
19
2
49
1
13
Download from Www.Somanuals.com. All Manuals Search And Download.
ATTACHING THE CURL PAD
To use the Curl Pad (29), first remove the 50mm
Round Slanted Inner Cap (66) from the Seat Frame
(6). Then, insert the Curl Post (9) into the Seat Frame
and secure the Curl Post with the Curl Knob (64).
Remove the Curl Pad (29) and replace the 50mm
Round Slanted Inner Cap (66) when performing an
exercise that does not require the Curl Pad.
29
9
6
66
64
ATTACHING THE CURL BAR
To use the Curl Bar (28), first attach the housing
cables to the leg lever (see ATTACHING THE LEG
LEVER on the previous page). Attach the clip on the
Curl Bar to the hook on the Leg Lever (8).
28
8
PLUGGING IN THE RESISTANCE SYSTEM
Plug the indicated end of the Transformer (122) into
the Back Mech Cover (12). Plug the other end of the
Transformer into a 120-volt outlet. All indicators and
displays on the console will flash once; the console
will then be ready for use. The motor may be heard
while the resistance system calibrates itself.
Important: Always plug in the transformer when
using the resistance system.
The resistance system will need to be calibrated man-
ually the first time it is used. To do this, plug in the
Transformer (122) as described above. Then, press
and hold the LBS up and down buttons on the
Console (30) for three seconds. The motor will be
heard while the resistance system calibrates itself.
12
122
Press
Follow this procedure whenever the resistance system
does not seem to be working properly and needs to
be recalibrated.
30
14
Download from Www.Somanuals.com. All Manuals Search And Download.
THE RESISTANCE SYSTEM CONSOLE
Resistance. To adjust the resistance level, first make
sure that no cables are being pulled. Then, press
the LBS Up or Down button. The resistance level will
be displayed in the top display.
Rep Counter. Press the REPS Up or Down button
until the center display shows the desired number of
repetitions to be completed for an exercise. As repeti-
tions are started, the console will count down to zero.
Set Counter. Press the SETS Up or Down button until
the bottom display shows the desired number of sets
to be completed for an exercise. As sets are complet-
ed, the console will count down to zero. Note: If SETS
and REPS are set at zero, the console will count up
when each repetition is started.
TIGHTENING THE MECH ROPE
14
The type of rope used on the resistance system, can
stretch slightly when it is first used. If there is slack in
the rope before resistance is felt, the rope should be
tightened.
56
To tighten the Mech Rope (56), first set the system
resistance level to 100 pounds. Locate the end of the
Mech Rope with the Rope Clamps (120, 121) and pull
it out until the Rope is tight. Then, measure the dis-
tance between the Rope Cover (118) and the Swivel
Arm (14).
118
Measure
Distance
123
Set the system resistance to the lowest level. Have a
second peron pull the Mech Rope (56) out and hold it
while the Rope is adjusted. Push the Rope Cover
(118) down the Rope and loosen the two M5 x 16mm
Button Screws (123). Pull the Rope through the Link
(119) and the Rope Clamps (120, 121) to shorten the
Rope by the measured amount. Then, retighten the
two Screws and cover the Rope Clamps with the
Rope Cover.
118
56
120
119
WARNING:
Always make sure the
two M5 x 16mm Button Screws (123) are fully
tightened before the resistance system is used.
121
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Rest for a short period of time after each set. The
ideal resting periods are:
• Rest for three minutes after each set for a muscle
building workout.
slowly as you stretch and do not bounce. Ease into
each stretch gradually and go only as far as you can
without strain. Stretching at the end of each workout
is an effective way to increase flexibility.
• Rest for one minute after each set for a toning work-
out.
STAYING MOTIVATED
• Rest for 30 seconds after each set for a weight loss
workout.
Plan to spend the first couple of weeks familiarizing
yourself with the equipment and learning the proper
form for each exercise.
For motivation, keep a record of each workout. The
chart on pages 18 and 19 of this manual can be pho-
tocopied and used to schedule and record your work-
outs. List the date, the exercises performed, the resist-
ance used, and the numbers of sets and repetitions
completed. Record your weight and key body meas-
urements at the end of every month. Remember, the
key to achieving the greatest results is to make exer-
cise a regular and enjoyable part of your everyday life.
COOLING DOWN
End each workout with 5 to 10 minutes of stretching.
Include stretches for both your arms and legs. Move
MUSCLE CHART
O
A. Sternomastoid (neck)
A
B. Pectoralis Major (chest)
C. Biceps (front of arm)
D. Obliques (waist)
P
L
Q
B
E. Brachioradials (forearm)
F. Hip Flexors (upper thigh)
G. Abductor (outer thigh)
H. Quadriceps (front of thigh)
I. Sartorius (front of thigh)
J. Tibialis Anterior (front of calf)
K. Soleus (front of calf)
R
S
C
D
E
T
F
M
N
U
L. Anterior Deltoid (shoulder)
M. Rectus Abdominus (stomach)
N. Adductor (inner thigh)
G
H
I
V
O. Trapezius (upper back)
P. Posterior Deltoid (shoulder)
Q. Rhomboideus (upper back)
R. Triceps (back of arm)
S. Latissimus Dorsi (mid back)
T. Spinae Erectors (lower back)
U. Gluteus Medius (hip)
W
X
J
K
V. Gluteus Maximus (buttocks)
W. Hamstring (back of leg)
X. Gastrocnemius (back of calf)
17
Download from Www.Somanuals.com. All Manuals Search And Download.
EXERCISE GUIDELINES
THE FOUR BASIC TYPES OF WORKOUTS
PERSONALIZING YOUR EXERCISE PROGRAM
Muscle Building
Determining the exact length of time for each workout,
as well as the number of repetitions or sets completed,
is an individual matter. It is important to avoid overdo-
ing it during the first few months of your exercise pro-
gram. You should progress at your own pace and be
sensitive to your body’s signals. If you experience pain
or dizziness at any time while exercising, stop immedi-
ately and begin cooling down. Find out what is wrong
before continuing. Remember that adequate rest and a
proper diet are important factors in any exercise pro-
gram.
To increase the size and strength of your muscles,
push them to a high percentage of their maximum
capacity. Your muscles will continually adapt and grow
as you progressively increase the intensity of your
exercise. You can adjust the intensity level of an indi-
vidual exercise in two ways:
• by changing the amount of resistance used
• by changing the number of repetitions or sets per-
formed. (A “repetition” is one complete cycle of an
exercise, such as one sit-up. A “set” is a series of
repetitions.)
WARMING UP
The proper amount of resistance for each exercise
depends upon the individual user. You must gauge
your limits and select the amount of resistance that is
Begin each workout with 5 to 10 minutes of stretching
and light exercise to warm up. Warming up prepares
right for you. Begin with 3 sets of 8 repetitions for each your body for more strenuous exercise by increasing
exercise you perform. Rest for 3 minutes after each
set. When you can complete 3 sets of 12 repetitions
without difficulty, increase the amount of resistance.
circulation, raising your body temperature and deliver-
ing more oxygen to your muscles.
WORKING OUT
Toning
You can tone your muscles by pushing them to a mod- Each workout should include 6 to 10 different exercis-
erate percentage of their capacity. Select a moderate
amount of resistance and increase the number of rep-
etitions in each set. Complete as many sets of 15 to
20 repetitions as possible without discomfort. Rest for
1 minute after each set. Work your muscles by com-
es. Select exercises for every major muscle group,
emphasizing areas that you want to develop most. To
give balance and variety to your workouts, vary the
exercises from session to session.
pleting more sets rather than by using high amounts of Schedule your workouts for the time of day when your
resistance.
energy level is the highest. Each workout should be
followed by at least one day of rest. Once you find the
schedule that is right for you, stick with it.
Weight Loss
To lose weight, use a low amount of resistance and
increase the number of repetitions in each set.
Exercise for 20 to 30 minutes, resting for a maximum
of 30 seconds between sets.
EXERCISE FORM
Maintaining proper form is an essential part of an
effective exercise program. This requires moving
through the full range of motion for each exercise, and
Cross Training
Cross training is an efficient way to get a complete and moving only the appropriate parts of the body.
well-balanced fitness program. An example of a bal-
anced program is:
• Plan strength training workouts on Monday,
Wednesday, and Friday.
• Plan 20 to 30 minutes of aerobic exercise, such as
running on a treadmill or riding on an exercise cycle
or an elliptical exerciser, on Tuesday and Thursday.
Exercising in an uncontrolled manner will leave you
feeling exhausted. On the exercise guide accompany-
ing this manual you will find photographs showing the
correct form for several exercises, and a list of the
muscles affected. Refer to the muscle chart on the
next page to find the names of the muscles.
• Rest from both strength training and aerobic exercise The repetitions in each set should be performed
for at least one full day each week to give your body
time to regenerate.
smoothly and without pausing. The exertion stage of
each repetition should last about half as long as the
return stage. Proper breathing is important. Exhale
The combination of strength training and aerobic exer- during the exertion stage of each repetition and inhale
cise will reshape and strengthen your body, plus devel- during the return stroke. Never hold your breath.
op your heart and lungs.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
EXERCISE
WEIGHT
WEIGHT
WEIGHT
SETS
SETS
SETS
REPS
REPS
REPS
MONDAY
Date:
/
/
AEROBIC EXERCISE
EXERCISE
TUESDAY
Date:
/
/
WEDNESDAY
Date:
/
/
AEROBIC EXERCISE
EXERCISE
THURSDAY
Date:
/
/
FRIDAY
Date:
/
/
Make photocopies of this page for scheduling and recording your workouts.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
EXERCISE
WEIGHT
WEIGHT
WEIGHT
SETS
SETS
SETS
REPS
REPS
REPS
MONDAY
Date:
/
/
AEROBIC EXERCISE
EXERCISE
TUESDAY
Date:
/
/
WEDNESDAY
Date:
/
/
AEROBIC EXERCISE
EXERCISE
THURSDAY
Date:
/
/
FRIDAY
Date:
/
/
Make photocopies of this page for scheduling and recording your workouts.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
PART IDENTIFICATION CHART
Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each draw-
ing is the key number of the part, from the PART LIST in the center of this manual. Note: Some small parts
may have been pre-attached. If a part is not in the parts bag, check to see if it has been
pre-attached.
M4 x 20mm Self-
M4 Washer (36)
M6 Washer (85)
M6 x 16mm Screw (72)
tapping Screw (94)
M10 x 20mm Button Screw (83)
M10 x 25mm Button Bolt (99)
M12 x 30mm Bolt (109)
M10 Washer (91)
M10 Nylon Locknut (74)
M10 x 60mm Bolt (80)
M6 Bolt Set (79)
M10 x 72mm Bolt (101)
M10 x 80mm Button Screw (77)
M10 x 98mm Button Bolt (98)
M6 x 100mm Screw (71)
Download from Www.Somanuals.com. All Manuals Search And Download.
PART LIST—Model No. NTS5925.0
R0306A
Key
Key
Key
No. Qty. Description
No Qty. Description
No. Qty. Description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
1
1
1
1
1
1
1
1
1
1
2
1
1
2
1
1
1
2
2
2
1
2
Base
Upright Base
Upright
Top Frame
Dip Arm
Seat Frame
Base Plate
Leg Lever
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
1
8
2
2
1
4
1
1
2
2
2
2
1
2
1
Ankle Strap
32mm Round Inner Cap 97
Band Spacer
Pulley
Mech Rope
Endcap
96
2
4
2
M12 x 12mm Screw
M3 Nut
M10 x 98mm Button
Bolt
M10 x 25mm Button
Bolt
19mm Round Inner Cap
M10 x 72mm Bolt
M4 x 38mm Self-tapping
Screw
M3 Lock Washer
6205 Bearing
M5 x 15mm Bolt
M5 Washer
46mm Spacer
M10 x 125mm Bolt
M12 x 30mm Bolt
Link Shaft
M6 x 16mm Button
Screw
98
99
5
Pin
100
101
102
8
1
4
Center Cover
Wheel
Wheel Endcap
Base Cap
50mm Round Inner Cap 104
Curl Knob
Dip Arm Cap
50mm Round Slanted
Inner Cap
Bearing Bushing
Base Foot
M4 x 16mm Self-tapping 111
Screw
M10 x 55mm Button
Bolt
Curl Post
Mech Frame
Dip Handle
Back Mech Cover
Front Mech Cover
Swivel Arm
Seat
103
4
4
2
3
2
1
1
1
2
105
106
107
108
109
110
Backrest
Headrest
67
68
69
2
2
9
Pull-up Handle
Housing Cable
Top Arm Cap
Upright Cap
32mm Round Outer
Cap
70
2
112
113
114
115
4
2
2
1
M3 Washer
M6 x 90mm Bolt
6mm Spacer
Rope Retainer
Extension
M3 x 25mm Bolt
Limit Switch
71
72
73
4
6
1
M6 x 100mm Screw
M6 x 16mm Screw
M10 x 217mm Bolt
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
2
2
4
2
4
1
1
1
1
2
2
1
1
2
2
2
2
2
1
1
2
2
1
1
2
1
6
2
Eyebolt
Large Foam Pad
Small Foam Pad
Pulley Housing
Finger Guard
Curl Bar
Curl Pad
Console
Squat Bar
Extension Strap
Handle
74 24 M10 Nylon Locknut
116
117
118
119
120
121
122
123
4
2
2
1
1
1
1
2
75
76
77
1
1
2
Inductor
M10 x 32mm Bolt
M10 x 80mm Button
Screw
M10 x 116mm Bolt
M6 Bolt Set
M10 x 60mm Bolt
Lower Wire Harness
30mm Steel Spacer
M10 x 20mm Button
Screw
Rope Cover
Link
Top Rope Clamp
Bottom Rope Clamp
Transformer
M5 x 16mm Button
Screw
Bar Hook
Bar Grip
M10 x 16mm Button
Bolt
M10 Lock Washer
Cover Panel
M10 x 52mm Button
Bolt
M3 x 10mm Self-tapping
Screw
Upper Wire Harness
M10 x 95mm Grade 8.8
Bolt
User’s Manual
Exercise Guide
Grease Packet
Allen Wrench
78
79
80
81
82
83
4
2
4
1
2
8
Mech Arm
124
125
126
1
1
2
Motor Assembly
M4 Washer
Resistance Band
Spring
Wheel
Brass Washer
Push Link
84
85
86
87
88
89
90
1
4
1
1
2
1
4
Cable Trap
M6 Washer
127
128
129
2
2
2
76mm Spacer
M10 x 95mm Bolt
M6 Locknut
13mm Spacer
Band Stop Spacer
M5 Nut
130
2
70mm Pulley
6mm Spacer
M5 x 35mm Bolt
Clip
Mech Pivot Axle
Rep Counter
Cable Clip
91 29 M10 Washer
92
93
131
132
1
1
2
7
Slot Guard
M4 x 25mm Self-tapping
Screw
#
#
#
#
1
1
2
3
94 14 M4 x 20mm Self-tapping
Screw
95
Mech Pulley Plate
4
M4 x 10mm Self-tapping
Screw
51 11 90mm Pulley
Note: “#” indicates a non-illustrated part. Specifications are subject to change without notice. See the back cover
of this manual for information about ordering replacement parts.
Download from Www.Somanuals.com. All Manuals Search And Download.
EXPLODED DRAWING A—Model No. NTS5925.0
R0306A
94
69
93
128
33
29
30
93
36
93
93
94
69
49
53
12
9
13
118
70
14
72
74
28
56
69
67
74
91
82
51
94
69
95
76
51
109
53
104
84
92
74
52
107
51
55
95
74
90
82
95
39
104
41
108
90
91
32
74
14
96
95
10
37
78
107
67
123
70
54
118
130
74
89
120
119
39
110
56
90
96
105
69
106
54
55
114
75
121
45
46
90
42
47
51
88
48
74
50
53
47
35
78
74
106
114
113
115
126
111
44
40
127
112
103
97
40
44
111
127
126
124
86
132
87
112
31
38
103
50
116
34
117
125
116
81
131
53
Download from Www.Somanuals.com. All Manuals Search And Download.
EXPLODED DRAWING B—Model No. NTS5925.0
R0306A
36
94
83
91
21
83
83
24
20
4
23
22
18
91
83
91
83
53
65
91
91
83
91
74
20
83
98
5
91
53
65
91
77
26
11
53
129
22
85
17
91
23
71
77
27
74
91
27
129
24
16
11
53
43
27
85
73
74
19
26
91
85
15
71
91
27
74
94
99
58
3
91
71
63
91
43
57
85
19
91
99
8
57
66
91
64
99
2
59
101
6
74
72
100
60
79
57
72
57
94
63
7
79
100
60
94
94
61
94
79
68
79
74
94
94
74
61
94
74
68
94
62
74
1
102
102
91
80
25
122
62
102
102
Download from Www.Somanuals.com. All Manuals Search And Download.
ORDERING REPLACEMENT PARTS
To order replacement parts, see the front cover of this manual. To help us assist you, please be prepared to give
the following information:
• the MODEL NUMBER of the product (NTS5925.0)
• the NAME of the product (NordicTrack E500 resistance system)
• the SERIAL NUMBER of the product (see the front cover of this manual)
• the KEY NUMBER and DESCRIPTION of the part(s) (see the PART LIST and EXPLODED DRAWING at the
center of this manual)
LIMITED WARRANTY
WHAT IS COVERED—The entire NordicTrack resistance system (“Product”) is warranted to be free of all defects in material and
workmanship.
WHO IS COVERED—The original purchaser or any person receiving the Product as a gift from the original purchaser.
HOW LONG IS IT COVERED—ICON Health & Fitness, Inc. (“ICON”), warrants the product frame for the lifetime of the original
owner. ICON warrants all other parts for one year after the date of purchase. Labor is covered for ninety days.
WHAT WE DO TO CORRECT COVERED DEFECTS—We will ship to you, without charge, any replacement part or component, pro-
viding the repairs are authorized by ICON first and are performed by an ICON trained and authorized service provider, or, at our
option, we will replace the Product.
WHAT IS NOT COVERED—Any failures or damage caused by unauthorized service, misuse, accident, negligence, improper
assembly or installation, alterations, modifications without our written authorization or by failure on your part to use, operate, and
maintain as set out in your User’s Manual (“Manual”).
WHAT YOU MUST DO—Always retain proof of purchase, such as your bill of sale; store, operate, and maintain the Product as spec-
ified in the Manual; notify our Customer Service Department of any defect within 10 days after discovery of the defect; as instruct-
ed, return any defected part for replacement or, if necessary, the entire product, for repair.
USER’S MANUAL—It is VERY IMPORTANT THAT YOU READ THE MANUAL before operating the Product. Remember to do the
periodic maintenance requirements specified in the Manual to assure proper operation and your continued satisfaction.
HOW TO GET PARTS AND SERVICE—Simply call the toll-free telephone number on the front cover of this manual and tell them
your name and address and the serial number of your Product. They will tell you how to get a part replaced, or if necessary, arrange
for service where your Product is located or advise you how to ship the Product for service. Before shipping, always obtain a Return
Authorization Number (RA No.) from our Customer Service Department; securely pack your Product (save the original shipping car-
ton if possible); put the RA No. on the outside of the carton and insure the product. Include a letter explaining the product or prob-
lem and a copy of your proof of purchase if you believe the service is covered by warranty.
ICON is not responsible or liable for indirect, special or consequential damages arising out of or in connection with the use or per-
formance of the product or damages with respect to any economic loss, loss of property, loss of revenues or profits, loss of enjoy-
ment or use, costs of removal, installation or other consequential damages of whatsoever nature. Some states do not allow the
exclusion or limitation of incidental or consequential damages. Accordingly, the above limitation may not apply to you.
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of merchantability or fitness
for a particular purpose is limited in its scope and duration to the terms set forth herein. Some states do not allow limitations on how
long an implied warranty lasts. Accordingly, the above limitation may not apply to you.
No one is authorized to change, modify or extend the terms of this limited warranty. This warranty gives you specific legal rights and
you may have other rights which vary from state to state.
ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813
Part No. 237942 R0306A
Printed in USA © 2006 ICON IP, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
|