Model No. NTEL4255.2
Serial No.
USER'S MANUAL
Write the serial number in the space
above for future reference.
Serial
Number
Decal
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or if parts are
damaged or missing, PLEASE
CONTACT OUR CUSTOMER
SERVICE DEPARTMENT
DIRECTLY.
CALL TOLL-FREE:
1-888-825-2588
Mon.–Fri., 6 a.m.–6 p.m. MST
ON THE WEB:
CAUTION
Visit our website at
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this man-
ual for future reference.
new products, prizes,
fitness tips, and much more!
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT PRECAUTIONS
WARNING:
To reduce the risk of serious injury, read the following important precau-
tions before using the elliptical exerciser.
1. Read all instructions in this manual and all
warnings on the elliptical exerciser before
using the elliptical exerciser.
13.The pulse sensors are not medical devices.
Various factors, including the user's move-
ment, may affect the accuracy of heart rate
readings. The pulse sensors are intended
only as exercise aids in determining heart
rate trends in general.
2. It is the responsibility of the owner to ensure
that all users of the elliptical exerciser are
adequately informed of all precautions.
14.When you stop exercising, allow the pedals
to slowly come to a complete stop. The ellip-
tical exerciser does not have a free wheel;
the pedals will continue to move until the fly-
wheel stops.
3. Use the elliptical exerciser only as described
in this manual.
4. The elliptical exerciser is intended for home
use only. Do not use the elliptical exerciser in
a commercial, rental, or institutional setting.
15.The battery pack contains materials that are
considered hazardous to the environment.
Proper disposal of the battery is required by
federal law.
5. Keep the elliptical exerciser indoors, away
from moisture and dust. Place the elliptical
exerciser on a level surface, with a mat be-
neath it to protect the floor or carpet. Make
sure that there is enough clearance around
the elliptical exerciser to mount, dismount,
and use it.
16. The decal shown below has been placed on
the elliptical exerciser. If the decal is missing
or illegible, call the toll-free telephone num-
ber on the front cover of this manual and
order a free replacement decal. Apply the
decal in the location shown.
6. Inspect and properly tighten all parts regu-
larly. Replace any worn parts immediately.
7. Keep children under age 12 and pets away
from the elliptical exerciser at all times.
8. The elliptical exerciser should not be used by
persons weighing more than 350 pounds.
9. Always hold the handlebars when mounting,
dismounting, or using the elliptical exerciser.
10. Keep your back straight when using the ellip-
tical exerciser; do not arch your back.
11.If you feel pain or dizziness while exercising,
stop immediately and begin cooling down.
12.Wear appropriate exercise clothes and ath-
letic shoes while using the elliptical exer-
ciser.
WARNING:
Before beginning this or any exercise program, consult your physician. This
is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using. ICON assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE YOU BEGIN
®
Congratulations for selecting the new NordicTrack
EX 1000 COMMERCIAL PRO elliptical exerciser.
tions after reading this manual, please see the front
cover of this manual. To help us assist you, note the
product model number and serial number before call-
ing. The model number is NTEL4255.2. The serial
number can be found on a decal attached to the ellipti-
cal exerciser (see the front cover of this manual for the
location of the decal).
The EX 1000 COMMERCIAL PRO elliptical exerciser
is an incredibly smooth exerciser that moves your feet
in a natural elliptical path, minimizing the impact on
your knees and ankles. And the EX 1000 elliptical ex-
erciser offers an array of features designed to help you
achieve your fitness goals in the convenience and pri-
vacy of your home.
Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.
For your benefit, read this manual carefully before
you use the elliptical exerciser. If you have ques-
Handlebar
Console
Handgrip Pulse Sensor
Water Bottle Holder*
Wheel
Levelling Foot
Pedal
Handle
Levelling Foot
*No water bottle is included
4
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY
Assembly requires two persons. Set the elliptical exerciser in a cleared area and remove all packing materials.
Do not dispose of the packing materials until assembly is completed. Assembly can be completed using the in-
cluded hex keys and your own adjustable wrench
.
Use the drawings below to identify the small parts used for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST on page 24. The number following the key number is
the quantity needed for assembly. Note: Some small parts may have been preassembled. If a part is not in
the parts bag, check to see if it has been preassembled.
M8 Small
M10 Split
Wave Washer
(88)–4
M10 Washer
(67)–14
M8 Washer
(69)–4
Washer (85)–20
Washer (18)–4
M4 x 16mm
Bolt (47)–4
M8 x 19mm Button
Screw (56)–4
M8 Nylon
M10 Nylon
M4 x 22mm
Locknut (72)–4
Locknut (70)–2
Screw (57)–2
M10 x 13mm Button
Screw (54)–14
M8 x 38mm Button
Screw (58)–4
M8 x 55mm Bolt
Set (92)–2
M10 x 25mm Patch
Screw (48)–4
M10 x 65mm Bolt
Set (94)–2
M10 x 116mm Carriage Bolt (38)–2
M10 x 123mm Button Screw (87)–2
Thrust Washer
(66)–4
5
Download from Www.Somanuals.com. All Manuals Search And Download.
1.
1
To make assembly easier, read the informa-
tion on page 5 before you begin assembling
the elliptical exerciser.
Attach the Stabilizer (8) to the Frame (1) with two
M10 x 116mm Carriage Bolts (38) and two M10
Nylon Locknuts (70).
38
8
1
70
2. Have another person hold the Upright (2) in the po-
sition shown. Connect the Upper Wire Harness (77)
to the Lower Wire Harness (78).
2
Attach the Upright (2) to the Frame (1) with four
M10 x 25mm Patch Screws (48) and four M10 Split
Washers (85). Make sure that no wires are
pinched between the Upright and the Frame.
2
77
78
48
85
85
48
1
85
1
3. Attach the Track Frame (4) to the Frame (1) with
two M10 x 123mm Button Screws (87) and two
M10 Split Washers (85). Finger tighten a Button
Screw into the lower hole first, and then finger
tighten a Button Screw into the upper hole. Then,
tighten both Button Screws. Note: This step may be
easier if you raise the Frame a few inches in the lo-
cation shown by the arrow at the right while you at-
tach the Track Frame.
3
87
85
87
85
4
6
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Apply a small amount of the included grease to the
sides of two Wave Washers (88) and two Thrust
Washers (66).
4
Slide a Weld Spacer (89) onto the Left Crank Arm
(83). Next, identify the Left Track Arm (12), which
is marked with an “L.” Orient the Left Track Arm as
shown, and slide it onto the Left Crank Arm. Then,
slide a Wave Washer (88) on the end of the Left
Crank Arm.
83
12
Grease
11
89
Slide an M8 Small Washer (18) and an Axle Cap
(41) onto an M8 x 19mm Button Screw (56). Next,
slide a Thrust Washer (66) onto the shoulder of
the Axle Cap. Then, tighten the Button Screw into
the end of the Left Crank Arm (83). Make sure
that the Thrust Washer remains on the shoul-
der of the Axle Cap, and that the Wave Washer
(88) remains on the end of the Left Crank Arm.
88
66
41
18
56
Repeat this step to attach the Right Track Arm
(11) to the right side of the elliptical exerciser.
5. Attach a Pedal (21) to the Left Pedal Leg (14) with
seven M10 x 13mm Button Screws (54), seven
M10 Split Washers (85), and seven M10 Washers
(67).
5
21
14
Attach the other Pedal (not shown) to the Right
Pedal Leg (not shown) in the same way.
67
85
67
85
54
54
6. Apply a thin film of grease to the barrel of an M10 x
65mm Bolt Set (94). Next, fit the bracket on the
Left Pedal Leg (14) onto the bracket on the Left
Track Arm (12). Attach the Left Pedal Leg to the
Left Track Arm with the Bolt Set.
6
94
14
Attach the Right Pedal Leg (not shown) to the
Right Track Arm (not shown) in the same way.
Grease
94
12
7
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Identify the Left Handlebar (19), which is marked
with an “L.” Insert the Left Handlebar into one of
the Handlebar Legs (17). Next, turn the Left
Handlebar and the Handlebar Leg so that the
wide side of the pivot tube on the Left
7
Handlebar is above the hexagonal holes in the
Handlebar Leg. Attach the Left Handlebar with two
M8 x 38mm Button Bolts (58) and two M8 Nylon
Locknuts (72). Make sure that the Nylon
19
20
Locknuts are inside of the hexagonal holes. Do
not tighten the Button Bolts yet.
Wide side of
pivot tube
Assemble the Right Handlebar (20) and the other
Handlebar Leg (17) in the same way.
58
17
72
58
17
Hexagonal
Holes
8. Apply a small amount of grease to the sides of two
Wave Washers (88) and two Thrust Washers (66).
8
Slide the Left Handlebar (19) onto the Handlebar
Axle (16) as shown. Next, slide a Wave Washer
(88) onto the end of the Handlebar Axle.
20
Slide an M8 Small Washer (18) and an Axle Cap
(41) onto an M8 x 19mm Button Screw (56). Next,
slide a Thrust Washer (66) onto the shoulder of
the Axle Cap. Then, tighten the Button Screw into
the end of the Handlebar Axle (16). Make sure
that the Thrust Washer remains on the shoul-
der of the Axle Cap, and that the Wave Washer
(88) remains on the end of the Handlebar Axle.
19
16
66
88
56
18
88
41
66
18
56
1
Grease
41
Assemble the Right Handlebar (20) in the same
way. Then, tighten both M8 x 19mm Button Screws
(56) at the same time.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
9. Apply a film of grease to the barrel of an M8 x 55mm
Bolt Set (92) and to a 7mm Spacer (55). Slide an
M8 Washer (69) and the Spacer onto the barrel.
9
While another person holds the front end of the
Left Pedal Leg (14) inside of the bracket on the left
Handlebar Leg (17), insert the barrel of the Bolt
Set (92) through both parts. Next, slide a 7mm
Spacer (55) and an M8 Washer (69) onto the end
of the barrel of the Bolt Set. Then, turn the screw
of the Bolt Set a few turns into the barrel. Do not
overtighten the Bolt Set; the left Handlebar Leg
must be able to pivot freely.
55
17
55
92
69
14
Grease
92
Attach the right Handlebar Leg (not shown) to the
Right Pedal Leg (not shown) in the same way.
69
See step 7. Tighten the four M8 x 38mm Button
Bolts (58).
10. While another person holds the Console (74) near
the Upright (2), connect the Pulse Jumper Wire
(76) to the console pulse wire, and connect the
Upper Wire Harness (77) to the console wire har-
ness. Insert the excess wires into the Upright.
10
74
2
Hold the Console (74) against the Upright (2).
Make sure that no wires are pinched. Attach the
Console with four M4 x 16mm Screws (47).
47
77
76
11. Attach the Water Bottle Holder (26) to the Frame
(1) with two M4 x 22mm Screws (57).
11
1
26
57
12. Make sure that all parts of the elliptical exerciser are properly tightened. Cover the floor beneath the el-
liptical exerciser to protect the floor from damage. Note: Some extra hardware may be left over.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE THE CHEST PULSE SENSOR
To get the best performance from the chest pulse sen-
sor, please read the instructions below.
side. Using a saline solution such as saliva or contact
lens solution, wet both electrode areas. Then, return
the sensor unit to a position against your chest.
HOW TO PUT ON THE CHEST PULSE SENSOR
CHEST PULSE SENSOR TROUBLESHOOTING
The chest pulse sensor consists of two components:
the chest strap and the sensor unit. Follow the steps
below to put on the chest pulse sensor.
If the chest pulse sensor does not function prop-
erly, or if the displayed heart rate is excessively
high or low, try the steps below.
• Make sure that the chest pulse sensor is worn ex-
actly as described at the left. If the chest pulse sen-
sor does not function when positioned as described,
move it slightly lower or higher on your chest.
Chest Strap
Tab
• Each time you use the chest pulse sensor, use
saline solution such as saliva or contact lens solution
to wet the two electrode areas on the sensor unit. If
heart rate readings do not appear until you begin
perspiring, re-wet the electrode areas.
Sensor
Unit
Sensor Unit
Buckle
• Make sure that you are within arm’s length of the
console. For the console to display heart rate
readings, the user must be within arm’s length of
the console.
See the inset drawing above. Insert the tab on one end
of the chest strap through the hole in one end of the
sensor unit as shown. Make sure that the tab is flush
with the sensor unit.
• The chest pulse sensor is designed to work with
people who have normal heart rhythms. Heart rate
reading problems may be caused by medical condi-
tions such as premature ventricular contractions
(pvcs), tachycardia bursts, and arrhythmia.
Wrap the chest
pulse sensor
Logo
around your
chest. Attach the
free end of the
chest strap to
the sensor unit
as described
• The operation of the chest pulse sensor can be af-
fected by magnetic interference caused by high
power lines or other sources. If it is suspected that
magnetic interference may be causing a problem,
try relocating your exercise equipment.
above. Adjust the length of the chest strap, if neces-
sary. The chest pulse sensor should be under your
clothing, against your skin, and as high under the pec-
toral muscles or breasts as is comfortable. Make sure
that the logo is facing forward and is right-side-up.
• If the chest pulse sensor still does not function prop-
erly, test the chest pulse sensor in the following way:
Pull the sensor
Hold the chest
unit away from
Electrode Areas
pulse sensor
and place your
thumbs over
the electrode
areas as
Electrode Areas
your body a few
inches and lo-
cate the two
electrode areas
on the inner
shown.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Next, hold the chest pulse sensor near the console.
While holding one thumb stationary, begin tapping
the other thumb against the electrode area at a rate
of about one tap per second. Check the heart rate
reading on the console.
CHEST PULSE SENSOR CARE
• Thoroughly dry the chest pulse sensor after each
use. The chest pulse sensor is activated when the
electrode areas are wetted and the chest pulse sen-
sor is put on; the chest pulse sensor shuts off when
it is removed and the electrode areas are dried. If
the chest pulse sensor is not dried after each use, it
may remain activated longer than necessary, drain-
ing the battery prematurely.
• If the chest pulse sensor does not function properly
after you have followed all of the above instructions,
replace the battery in the following way:
Locate the battery
cover on the back of
the sensor unit. Insert
a coin into the slot in
the cover, turn the
cover counterclock-
wise, and remove the
cover.
• Store the chest pulse sensor in a warm, dry place.
Do not store the chest pulse sensor in a plastic bag
or other container that may trap moisture.
• Do not expose the chest pulse sensor to direct
sunlight for extended periods of time. Do not expose
the chest pulse sensor to temperatures above 122°
Fahrenheit (50° Celsius) or below 14° Fahrenheit
(-10° Celsius).
Remove the old bat-
tery and insert a new
CR 2032 battery.
• Do not excessively bend or stretch the sensor unit
when using or storing the chest pulse sensor.
Make sure that the
battery is turned so
the writing is on
top. Reattach the
battery cover and
turn it clockwise to
close it.
CR 2032
Battery
• Clean the sensor unit using a damp cloth—never
use alcohol, abrasives, or chemicals. The chest
strap may be hand washed and air dried.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO OPERATE THE ELLIPTICAL EXERCISER
HOW TO MOVE AND LEVEL THE ELLIPTICAL
EXERCISER
CAUTION: To decrease the risk of injury, bend your
legs and keep your back straight. Make sure to use
your legs rather than your back to lift the elliptical
exerciser. Do not attempt to move the elliptical exer-
ciser over an uneven surface.
Due to the size and weight of the elliptical exer-
ciser, moving it requires two persons. With the help
of another person, lift the handle on the rear of the el-
liptical exerciser until the elliptical exerciser will roll on
the front wheels. Carefully move the elliptical exerciser
to the desired location and then lower it.
If the elliptical exerciser rocks slightly on your floor, see
the inset drawings and turn the levelling feet under the
front and rear of the elliptical exerciser until the rocking
motion is eliminated.
EXERCISING ON THE ELLIPTICAL EXERCISER
To mount the elliptical exerciser, hold the handlebars
and step onto the pedal that is in the lowest position.
Next, step onto the other pedal. Push the pedals until
they begin to move with a continuous motion.
Wheel
To dismount the elliptical exerciser, wait until the ped-
als come to a complete stop. The elliptical exerciser
does not have a free wheel; the pedals will con-
tinue to move until the flywheel stops. When the
pedals are stationary, step off the highest pedal first.
Then, step off the lowest pedal.
Lift
Here
Levelling
Levelling
Foot
Feet
12
Download from Www.Somanuals.com. All Manuals Search And Download.
DIAGRAM OF THE CONSOLE
FEATURES OF THE CONSOLE
In addition, the console offers ten preset programs. Each
program automatically changes the resistance of the
pedals and prompts you to increase or decrease your
pace as it guides you through an effective workout.
The advanced console offers a selection of features
designed to make your workouts more enjoyable and
effective. When the manual mode of the console is se-
lected, the resistance of the pedals can be changed
with the touch of a button. As you pedal, the console
will provide continuous exercise feedback. You can
The console also features two heart rate programs that
automatically change the resistance of the pedals to
keep your heart rate near a target heart rate while you
even measure your heart rate using the handgrip pulse exercise.
sensor or the chest pulse sensor.
To use the manual mode of the console, see page
The console also features three calorie goal programs
that allow you to choose a calorie-burning goal for your
workout. As you exercise, the console will count the
calories that you burn until the goal is reached.
14. To use a calorie goal program, see page 15. To
use a preset program, see page 16. To use a heart
rate program, see page 17.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
The Time display
HOW TO USE THE MANUAL MODE
will show the
elapsed time. Note:
When a program is
Begin pedaling to activate the console.
1
selected (except for
heart rate program
The elliptical exerciser requires no batteries or
external power source. Power is supplied by a
generator while you are pedaling. To activate
the console, begin pedaling at a moderate pace.
After a few seconds, the console displays will
light. A tone will then sound and the console will
be ready for use.
2), the display will
show the time remaining in the program instead of
the elapsed time.
The Heart Rate
display will show
your heart rate
when you use the
handgrip pulse sen-
sor or the chest
pulse sensor.
Select the manual mode.
2
When the power is turned on, the manual mode
will be selected. If you have selected a program,
reselect the manual mode by pressing any of the
Quick Programs buttons repeatedly until a track
appears in the matrix (see the drawing below).
The Calories dis-
play will show the
approximate num-
ber of calories you
Begin pedaling and change the resistance of
have burned. Note:
3
the pedals as desired.
For a more accu-
rate reading, enter
As you pedal, change the resistance of the pedals
by pressing the Quick Resistance buttons. Note:
After a Quick Resistance button is pressed, it will
take a moment for the pedals to reach the se-
lected resistance level.
your weight by pressing the Weight (WT.) increase
and decrease buttons until your weight is shown in
the Calories/Min. display. Your weight will then be
saved in memory.
The Steps-
Monitor your progress with the displays.
Steps/Min. display
4
will show the total
The matrix—
number of steps
When the manual
mode or a calorie
goal program is
selected, the ma-
trix will show a
Track
you have pedaled
and your pedaling
pace, in steps per
minute. The display will change from one number
to the other every few seconds.
track representing
1/4 mile. As you
exercise, the indi-
cators around the
track will light in
succession until
the entire track is
lit. The track will
then darken and
The Resistance
display will show
the resistance level
of the pedals.
The Calories/Min.
display will show
the approximate
the indicators will again begin to light in succes-
sion.
number of calories
you are burning per
minute. Note: For a
more accurate
reading, enter your weight.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Measure your heart rate if desired.
HOW TO USE A CALORIE GOAL PROGRAM
5
To use the chest pulse sensor, see page 10. To
use the handgrip pulse sensor, follow the instruc-
tions below. Note: If you wear the chest pulse
sensor and hold the handgrip pulse sensor at
the same time, the console will not display
your heart rate accurately.
Turn on the console.
1
See step 1 on page 14.
Select a calorie goal program.
2
If there are
sheets of
Press the Calorie Goal
Programs button re-
peatedly until one of
the three calorie goal
indicators lights.
clear plastic
on the metal
contacts on
the handgrip
pulse sensor,
peel off the
Contacts
Enter your weight.
3
plastic. Place
When a calorie goal program is selected, the cur-
rent user weight setting will flash in the
your hands on the handgrip pulse sensor, with
your palms on the contacts. Avoid moving your
hands. When your pulse is detected, one or two
dashes will appear in the Heart Rate display and
then your heart rate will be shown.
Calories/Min. display. If you have already entered
your weight, press the Start button. If you have
not entered your weight, press the Weight (WT.)
increase and decrease buttons until your weight is
shown in the Calories/Min. display. Then, press
the Start button.
For the most accurate heart rate reading, continue
to hold the handgrips for about 30 seconds.
Change your calorie goal if desired.
4
If your heart rate is not shown, make sure that
your hands are positioned as described. Avoid
moving your hands excessively or squeezing the
metal contacts too tightly. For optimal performance,
periodically clean the metal contacts using a soft
cloth; never use alcohol, abrasives, or chemi-
cals.
After the Start button is pressed, a calorie goal will
flash in the Calories/Min. display for a few sec-
onds. If desired, press the Weight (WT.) increase
and decrease buttons to change the calorie goal
in increments of 50 calories.
Begin pedaling to start the program.
Turn on the fans if desired.
5
6
7
When a calorie goal program is used, the console
will function in the same way as when the manual
mode is selected, except that the Calories display
will show the number of calories still to be burned
instead of the approximate number of calories you
have burned. When the calorie goal is reached, a
tone will sound and the time will stop incrementing
in the display.
To turn on the fans at low speed, press the Fans
button. To turn on the fans at medium speed,
press the button again. To turn on the fans at high
speed, press the button a third time. To turn off
the fans, press the button a fourth time. Note: If
the fans are turned on but the pedals are not
moved for thirty seconds, the fans will automati-
cally turn off.
When you are finished exercising, the console
When you are finished exercising, the console
will automatically turn off.
6
will automatically turn off.
See step 7 on page this page.
If the pedals are not moved for a few seconds, a
series of tones will sound, the Time display will
begin to flash, and the console will pause.
If the pedals are not moved for a few minutes, the
console will turn off and the displays will be reset.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
The program will continue until no time remains in
the Time display.
HOW TO USE A PRESET PROGRAM
Adjust the intensity level of the program if
desired.
Turn on the console.
4
5
1
See step 1 on page 14.
To increase or decrease the intensity level of the
program, press the increase and decrease but-
tons above the Adjust Intensity indicator. If you
change the intensity level, the profile in the matrix
will show the new resistance settings.
Select a preset program.
2
To select a preset program, press one of the
Quick Programs buttons numbered 3 through 12.
When a preset program is selected, a profile of
the resistance settings of the program will scroll
across the matrix, the program time will appear in
the Time display, the maximum pace setting of
the program will flash in the Steps-Step/Min. dis-
play for a few seconds, and the maximum resis-
tance setting of the program will flash in the
Resistance display.
Use the pace guide to pace your exercise.
Throughout the
program, the pace
Pace Guide
guide will prompt
you to increase or
decrease your ped-
aling pace. When
one of the indica-
Press the Start button or begin pedaling to
3
tors on the left side of the pace guide lights, in-
crease your pace; when one of the indicators on
the right side lights, decrease your pace. When
the center indicator lights, maintain your current
pace. Important: The pace guide is intended
only to provide a goal. Make sure to pedal at a
pace that is comfortable for you.
start the program.
Each program is divided into 20, 30, or 45 one-
minute segments. One resistance setting and one
target pace setting are programmed for each seg-
ment. Note: The same resistance setting and/or tar-
get pace setting may be programmed for two or
more consecutive segments.
If you stop pedaling for several seconds, a tone
will sound and the program will pause. To restart
the program, simply resume pedaling.
When you start the
program, the resis-
tance setting for
the first segment
will be shown in
the flashing
Current Segment
Monitor your progress with the displays.
See step 4 on page 14.
6
7
8
9
Current Segment
column of the ma-
trix. The resistance
settings for the
Measure your heart rate if desired.
See step 5 on page 15.
next twelve seg-
ments will be shown in the columns to the right.
Turn on the fans if desired.
See step 6 on page 15.
When only three seconds remain in the first seg-
ment of the program, both the Current Segment
column and the column to the right will flash and a
series of tones will sound. When the first segment
ends, all resistance settings will move one column
to the left. The resistance setting for the second
segment will then be shown in the flashing
Current Segment column and the resistance of the
pedals will automatically change if a different resis-
tance setting is programmed for the second seg-
ment.
When you are finished exercising, the console
will automatically turn off.
See step 7 on page 15.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Put on the chest pulse sensor or hold the
handgrip pulse sensor.
HOW TO USE A HEART RATE PROGRAM
4
5
To use a heart rate program, you must wear the
chest pulse sensor or use the handgrip pulse sen-
sor. If you use the handgrip pulse sensor, it is not
necessary to hold the handgrips continuously dur-
ing the program; however, you should hold the
handgrips frequently for the program to operate
properly. Each time you hold the handgrips,
keep your hands on the metal contacts for at
least 30 seconds. Note: When you are not hold-
ing the handgrips, the letters PLS will flash in the
Heart Rate display instead of your heart rate.
Each heart rate program helps you to keep your heart
rate near target heart rate settings during your workout.
Follow the steps below to use a heart rate program.
Turn on the console.
1
See step 1 on page 14.
Select a heart rate program.
2
To select a heart rate program, press the Quick
Programs button numbered 1 or 2.
Press the Start button to start the program.
Heart rate program 1 is divided into 30 one-
minute segments. One target heart rate setting is
programmed for each segment. Note: The same
target heart rate setting may be programmed for
two or more consecutive segments.
If heart rate program 1 is selected, a profile of
the target heart rate settings of the program will
scroll across the matrix.
If heart rate pro-
gram 2 is se-
The target heart
lected, a pulse
rate setting for the
first segment will
be shown in the
Current Segment
graphic will appear
in the matrix. Each
time a heartbeat is
flashing Current
detected while you
Segment column of
the matrix. The tar-
get heart rate set-
tings for the next
twelve segments
will be shown in the
columns to the right.
are using the
chest pulse sensor or the handgrip pulse sensor,
a peak will appear in the pulse graphic.
Enter a target heart rate setting.
3
If heart rate pro-
gram 1 is se-
When only three seconds remain in the first seg-
ment of the program, both the Current Segment
column and the column to the right will flash, a se-
ries of tones will sound, and all target heart rate
settings will move one column to the left. The tar-
get heart rate setting for the second segment will
then be shown in the flashing Current Segment
column.
lected, the maxi-
mum target heart
rate setting of the
program will flash
in the Heart Rate
display. If desired, press the increase and de-
crease buttons above the Set Heart Rate indicator
to change the maximum target heart rate setting
(see EXERCISE INTENSITY on page 20). If you
change the maximum target heart rate setting, the
profile in the matrix will change to show the new
target heart rate settings.
Heart rate program 2 is divided into 40 one-
minute segments. The same target heart rate set-
ting is programmed for all segments. Note: For a
shorter workout, stop exercising or select a differ-
ent program before the program ends.
If heart rate program 2 is selected, the target
heart rate setting for the entire program will flash
in the Heart Rate display. If desired, press the in-
crease and decrease buttons above the Set Heart
Rate indicator to change the target heart rate set-
ting (see EXERCISE INTENSITY on page 20).
17
Download from Www.Somanuals.com. All Manuals Search And Download.
During both heart rate programs, the console
will regularly compare your heart rate to the target
heart rate setting. If your heart rate is too far
below or above the target heart rate setting, the
resistance of the pedals will automatically in-
crease or decrease to bring your heart rate closer
to the target heart rate setting.
Note: During the program, you can manually over-
ride the resistance setting, if desired, with the
Quick Resistance buttons. However, when the
console compares your heart rate to the target
heart rate setting, the resistance of the pedals
may automatically increase or decrease to bring
your heart rate closer to the target heart rate set-
ting.
After the first
minute of the pro-
If you stop pedaling for several seconds, a tone
will sound and the program will pause. To restart
the program, simply resume pedaling.
gram, the pace
guide will prompt
you to increase or
decrease your
Monitor your progress with the displays.
See step 4 on page 14.
6
7
8
pedaling pace.
When one of the indicators on the left side of the
pace guide lights, increase your pace; when one
of the indicators on the right side lights, decrease
your pace. When the center indicator lights, main-
tain your current pace.
Turn on the fans if desired.
See step 6 on page 15.
Important: The target heart rate settings are
intended only to provide motivation. Your ac-
tual heart rate may be slower than the target
heart rate settings. Make sure to exercise at a
pace that is comfortable for you.
When the program is finished, the console will
automatically turn off.
See step 7 on page 15.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE AND TROUBLESHOOTING
Most problems can be solved by following the simple steps below. Find the symptom that applies, and fol-
low the steps listed. If further assistance is needed, please see the front cover of this manual.
WEEKLY MAINTENANCE
5. SYMPTOM: THE CONSOLE TURNS OFF AS
SOON AS YOU STOP PEDALING
Inspect and properly tighten all external parts of the el-
liptical exerciser. Clean the elliptical exerciser with a
small amount of mild multi-purpose cleaner applied to
a 100% cotton cloth. When cleaning the elliptical exer-
ciser, pay special attention to the track and the wheels.
Remove all debris from the track. Clean the pedal cov-
ers with a soft nylon brush. Do not use acidic clean-
ers. Never spray any cleaner directly onto the ellip-
tical exerciser.
If the console turns off as soon as you stop pedal-
ing, the battery pack may not be charged. The
longer you pedal, the longer the battery pack will re-
tain a charge. It may be necessary to pedal for a
few minutes to charge the battery pack each time
you exercise. If the console turns off as soon as you
stop pedaling, even after you have pedaled for sev-
eral minutes, call the toll-free telephone number on
the front cover of this manual immediately.
TROUBLESHOOTING
6. SYMPTOM: THE PEDALS SLIP DURING USE
1. SYMPTOM: THE ELLIPTICAL EXERCISER IS
NOT LEVEL
If the pedals slip during use, the drive belt is slipping.
Follow the instructions below to adjust the tension of
the drive belt.
If the elliptical exerciser rocks slightly during use,
see HOW TO MOVE AND LEVEL THE ELLIPTICAL
EXERCISER on page 12.
First, remove the
two M6 x 16mm
Button Screws (49)
attaching the left
Pedal Disk (5).
Without removing
the Pedal Disk,
pivot it out of the
way.
5
2. SYMPTOM: THE PULSE SENSOR DOES NOT
FUNCTION PROPERLY
If the chest pulse sensor does not function properly,
see CHEST PULSE SENSOR TROUBLESHOOT-
ING on pages 10 and 11.
49
If the handgrip pulse sensor does not function prop-
erly, see step 5 on page 14.
Next, locate the
M10 Flange Nut
(95). Turn the
3. SYMPTOM: THE PEDAL DISKS RUB AGAINST
THE SIDE SHIELDS
Flange Nut clock-
wise until the ped-
als no longer slip
during the power
stroke.
95
If a pedal disk rubs against a side shield, loosen the
side shield mounting screws and move the side
shield slightly until the pedal disk stops rubbing.
Then, retighten the side shield mounting screws.
Reattach the Pedal Disk (5).
4. SYMPTOM: THE PEDAL WHEELS SQUEAK
If the pedal wheels squeak, use a 100% cotton cloth
to remove debris from the track and the wheels. If
the pedal wheels continue to squeak, apply a light
coat of silicone-based lubricant to the track.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
EXERCISE GUIDELINES
WARNING:
During the first few minutes of exercise, your body
uses easily accessible carbohydrate calories for en-
ergy. Only after the first few minutes of exercise does
your body begin to use stored fat calories for energy. If
your goal is to burn fat, adjust the intensity of your ex-
ercise until your heart rate is near the lowest number
in your training zone as you exercise.
Before beginning this or any exercise pro-
gram, consult your physician. This is espe-
cially important for persons over the age of 35
or persons with pre-existing health problems.
The pulse sensors are not medical devices.
Various factors, including the user's move-
ment, may affect the accuracy of heart rate
readings. The pulse sensors are intended
only as exercise aids in determining heart rate
trends in general.
For maximum fat burning, adjust the intensity of your
exercise until your heart rate is near the middle num-
ber in your training zone as you exercise.
Aerobic Exercise
If your goal is to strengthen your cardiovascular sys-
tem, your exercise must be “aerobic.” Aerobic exercise
is activity that requires large amounts of oxygen for
prolonged periods of time. This increases the demand
on the heart to pump blood to the muscles, and on the
lungs to oxygenate the blood. For aerobic exercise,
adjust the intensity of your exercise until your heart
rate is near the highest number in your training zone
as you exercise.
The following guidelines will help you to plan your ex-
ercise program. Remember that proper nutrition and
adequate rest are essential for successful results.
EXERCISE INTENSITY
Whether your goal is to burn fat or to strengthen your
cardiovascular system, the key to achieving the de-
sired results is to exercise with the proper intensity.
The proper intensity level can be found by using your
heart rate as a guide. The chart below shows recom-
mended heart rates for fat burning, maximum fat burn-
ing, and cardiovascular (aerobic) exercise.
WORKOUT GUIDELINES
Each workout should include the following three parts:
A warm-up, consisting of 5 to 10 minutes of stretching
and light exercise. A proper warm-up increases your
body temperature, heart rate, and circulation in prepa-
ration for exercise.
Training zone exercise, consisting of 20 to 30 min-
utes of exercising with your heart rate in your training
zone. (During the first few weeks of your exercise
program, do not keep your heart rate in your training
zone for longer than 20 minutes.)
A cool-down, with 5 to 10 minutes of stretching. This
will increase the flexibility of your muscles and will
help to prevent post-exercise problems.
To find the proper heart rate for you, first find your age
near the bottom of the chart (ages are rounded off to
the nearest ten years). Next, find the three numbers
above your age. The three numbers are your “training
zone.” The lower two numbers are recommended
heart rates for fat burning; the highest number is the
recommended heart rate for aerobic exercise.
EXERCISE FREQUENCY
To maintain or improve your condition, complete three
workouts each week, with at least one day of rest be-
tween workouts. After a few months of regular exer-
cise, you may complete up to five workouts each week
if desired. The key to success is to make exercise a
regular and enjoyable part of your everyday life.
Fat Burning
To burn fat effectively, you must exercise at a rela-
tively low intensity level for a sustained period of time.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
SUGGESTED STRETCHES
The correct form for several basic stretches is shown at the right.
Move slowly as you stretch—never bounce.
1
1. Toe Touch Stretch
Stand with your knees bent slightly and slowly bend forward
from your hips. Allow your back and shoulders to relax as you
reach down toward your toes as far as possible. Hold for 15
counts, then relax. Repeat 3 times. Stretches: Hamstrings, back
of knees, and back.
2
2. Hamstring Stretch
Sit with one leg extended. Bring the sole of the opposite foot to-
ward you and rest it against the inner thigh of your extended leg.
Reach toward your toes as far as possible. Hold for 15 counts,
then relax. Repeat 3 times for each leg. Stretches: Hamstrings,
lower back, and groin.
3. Calf/Achilles Stretch
3
With one leg in front of the other, reach forward and place your
hands against a wall. Keep your back leg straight and your back
foot flat on the floor. Bend your front leg, lean forward and move
your hips toward the wall. Hold for 15 counts, then relax. Repeat
3 times for each leg. To cause further stretching of the achilles
tendons, bend your back leg as well. Stretches: Calves, achilles
tendons, and ankles.
4
4. Quadriceps Stretch
With one hand against a wall for balance, reach back and grasp
one foot with your other hand. Bring your heel as close to your
buttocks as possible. Hold for 15 counts, then relax. Repeat 3
times for each leg. Stretches: Quadriceps and hip muscles.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES
22
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES
23
Download from Www.Somanuals.com. All Manuals Search And Download.
PART LIST—Model No. NTEL4255.2
R0207A
To locate the parts listed below, see the EXPLODED DRAWING on pages 25, 26, and 27.
Key No. Qty.
Description
Key No. Qty.
Description
1
1
1
2
1
2
1
1
1
1
1
1
1
1
1
1
1
2
4
1
1
2
2
2
10
1
1
4
2
1
1
4
1
2
10
4
5
4
2
2
4
4
12
1
1
2
4
6
4
8
Frame
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
#
2
4
M8 x 56mm Button Screw
Crank Screw
2
Upright
3
Track
8
Stand Off
4
Track Frame
Pedal Disk
2
M6 x 12mm Button Screw
M10 x 13mm Button Screw
7mm Spacer
5
14
4
6
Left Side Shield
Right Side Shield
Stabilizer
7
4
M8 x 19mm Button Screw
M4 x 22mm Screw
M8 x 38mm Button Bolt
M5 x 16mm Screw
16mm Spacer
8
2
9
Crank
4
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
Crank Spacer
Right Track Arm
Left Track Arm
Right Pedal Leg
Left Pedal Leg
Drive Belt
20
8
2
M8 x 48mm Bolt
3mm Spacer
2
8
Pedal Bushing
4
Long Side Shield Spacer
Key
Handlebar Axle
Handlebar Leg
M8 Small Washer
Left Handlebar
Right Handlebar
Pedal
2
4
Thrust Washer
14
1
M10 Washer
Battery Pack
12
2
M8 Washer
M10 Nylon Locknut
Tension Bolt
Transport Wheel
Handlebar Foam
Plastic Insert
Pulley
1
11
1
M8 Nylon Locknut
Short Side Shield Spacer
Display Console
M6 Washer
1
Water Bottle Holder
6mm Spacer
Set Screw
4
1
Pulse Jumper Wire
Upper Wire Harness
Lower Wire Harness
Controller Wire Harness
Ground Wire
1
Idler
1
Generator
1
Wheel
1
Control Board
Pulse Grip
1
Generator Coil Wire
Electromagnet Wire
Left Crank Arm
1
Bearing Cradle
Endcap
1
1
Right Crank Arm
M10 Split Washer
M8 Split Washer
M10 x 123mm Button Screw
Wave Washer
Levelling Foot
M6 Split Washer
M10 x 116mm Carriage Bolt
Handlebar Cap
Track Screw
Axle Cap
20
4
2
4
3
Weld Spacer
4
Small Bearing Cradle
Small Bearing
Bearing
12
2
Controller Bracket
Short Crank Spacer
Snap Ring
M8 x 55mm Bolt Set
Wheel Bolt
2
2
M10 x 65mm Bolt Set
M10 Flange Nut
User’s Manual
Wheel Bushing
M4 x 16mm Screw
M10 x 25mm Patch Screw
M6 x 16mm Button Screw
1
1
#
3
Hex Key
#
2
Grease
Note: # indicates a non-illustrated part. Specifications are subject to change without notice. See the back cover of
this manual for information about ordering replacement parts.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
EXPLODED DRAWING A—Model No. NTEL4255.2
R0207A
74
45
16
52
47
47
42
32
52
34
43
47
52
33
48
68
2
85
85
47
34
42
52
24
85
45
48
33
85
26
57
24
38
49
79
80
70
76
24
77
78
24
37
75
81
82
70
37
75
24
36
24
1
15
40
30
3
87
95
71
40
85
50
27
72
69
29
87
4
46
22
46
40
69
72
69
35
27
46
22
46
27
69
50
35
8
3
27
40
36
36
35
35
25
Download from Www.Somanuals.com. All Manuals Search And Download.
EXPLODED DRAWING B—Model No. NTEL4255.2
R0207A
49
5
59
59
7
59
53
73
64
64
59
6
59
5
59
53
59
59
49
26
Download from Www.Somanuals.com. All Manuals Search And Download.
EXPLODED DRAWING C—Model No. NTEL4255.2
R0207A
39
39
20
23
23
19
42
58
66
34
56
18
42
69
42
42
34
41
88
34
72
58
34
88
66
41
18
17
92
56
72
41
66
88
42
18
55
56
34
55
90
21
69
34
91
42
28
90
91
92
13
89
17
61
84
89
65
94
42
60
72
9
11
63
25
10
86
94
92
69
55
60
51
28
44
55
69
63
93
67
85
61
69
91
86
60
65
92
69
91
51
72
72
91
42
91
34
83
31
62
31
89
34
54
42
54
60
21
88
41
18
54
91
90
12
66
14
90
63
56
91
94
94
67
85
63
67
72
69
91
60
85
54
91
69
31
93
62
54
91
91
31
60
27
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO ORDER REPLACEMENT PARTS
To order replacement parts, see the front cover of this manual. To help us assist you, please be prepared to
provide the following information:
• the MODEL NUMBER of the product (NTEL4255.2)
• the NAME of the product (NordicTrack EX 1000 COMMERCIAL PRO elliptical exerciser)
• the SERIAL NUMBER of the product (see the front cover of this manual)
• the KEY NUMBER and DESCRIPTION of the part(s) (see pages 24 to 27)
LIMITED WARRANTY
WHAT IS COVERED—The entire NordicTrack elliptical exerciser (“Product”) is warranted to be free of all defects in material and
workmanship.
WHO IS COVERED—The original purchaser or any person receiving the Product as a gift from the original purchaser.
HOW LONG IS IT COVERED—ICON Health & Fitness, Inc. (“ICON”), warrants the product for one year after the date of purchase.
Labor is covered for one year.
WHAT WE DO TO CORRECT COVERED DEFECTS—We will ship to you, without charge, any replacement part or component,
providing the repairs are authorized by ICON first and are performed by an ICON trained and authorized service provider, or, at our
option, we will replace the Product.
WHAT IS NOT COVERED—Any failures or damage caused by unauthorized service, misuse, accident, negligence, improper as-
sembly or installation, alterations, modifications without our written authorization or by failure on your part to use, operate, and
maintain as set out in your User’s Manual (“Manual”).
WHAT YOU MUST DO—Always retain proof of purchase, such as your bill of sale; store, operate, and maintain the Product as
specified in the Manual; notify our Customer Service Department of any defect within 10 days after discovery of the defect; as in-
structed, return any defected part for replacement or, if necessary, the entire product, for repair.
USER’S MANUAL—It is VERY IMPORTANT THAT YOU READ THE MANUAL before operating the Product. Remember to do the
periodic maintenance requirements specified in the Manual to assure proper operation and your continued satisfaction.
HOW TO GET PARTS AND SERVICE—Simply call our Customer Service Department at 1-888-825-2588 and tell them your name
and address and the serial number of your Product. They will tell you how to get a part replaced, or if necessary, arrange for ser-
vice where your Product is located or advise you how to ship the Product for service. Before shipping, always obtain a Return
Authorization Number (RA No.) from our Customer Service Department; securely pack your Product (save the original shipping car-
ton if possible); put the RA No. on the outside of the carton and insure the product. Include a letter explaining the product or prob-
lem and a copy of your proof of purchase if you believe the service is covered by warranty.
ICON is not responsible or liable for indirect, special or consequential damages arising out of or in connection with the use or per-
formance of the product or damages with respect to any economic loss, loss of property, loss of revenues or profits, loss of enjoy-
ment or use, costs of removal, installation or other consequential damages of whatsoever nature. Some states do not allow the ex-
clusion or limitation of incidental or consequential damages. Accordingly, the above limitation may not apply to you.
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of merchantability or fitness
for a particular purpose is limited in its scope and duration to the terms set forth herein. Some states do not allow limitations on how
long an implied warranty lasts. Accordingly, the above limitation may not apply to you.
No one is authorized to change, modify or extend the terms of this limited warranty. This warranty gives you specific legal rights
and you may have other rights which vary from state to state.
ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813
Part No. 253092 R0207A
Printed in USA © 2007 ICON IP, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
|