Owner’s Manual
MEDIAMASTER
9400S
Download from Www.Somanuals.com. All Manuals Search And Download.
MEDIAMASTER 9400S
Contents
The Radio button
Volume level
15
15
15
16
16
FOR YOUR SAFETY
4
4
5
5
Rear panel
List of TV channels
List of Radio channels
Video recorder
Front panel
INSTALLATION OF THE MEDIAMASTER
Connecting the Mediamaster to the
satellite dish
Subtitling and Teletext. The TEXT Button 16
6
6
7
SETTING FROM THE MAIN MENU
TV channels and radio channels
TV Guide and Radio Guide
Edit Channels
16
17
17
17
18
18
18
18
19
19
19
19
20
20
21
21
22
22
22
22
22
23
23
24
25
26
27
Connecting the Mediamaster to a TV set
Connecting to a TV and a video recorder
If your VCR does not have a SCART-
Connector
7
Rearrange List
Connecting to an analogue satellite-
receiver and a video recorder
Connecting to Hi Fi system
Preparing the remote control
Before you continue
Rename List
7
Add channels
8
Lock channels
8
Rearrange channels
Remove channels
8
REMOTE CONTROL
9
USER PREFERENCES
Parental control
BASIC SETTINGS
10
Tuning procedure when RF
Connections are used
The Welcome Menu
Language settings
10
11
11
11
12
13
13
13
14
14
14
14
15
System settings
On/Off Timer setting
GAME
Language settings
Antenna Satellite configuration
Automatic channel Search
Manual channel Search
VIEWING TV
INSTALLATION SUBMENUS
Antenna Satellite configuration
Automatic channel search
Manual channel search
Advanced channel search
Reinstall
General information
TV screen format
Start/stop watching TV
Select channel
System Information
GLOSSARY OF TERMS
PROBLEM SOLVING
TECHNICAL SPECIFICATION
MENUS SCREEN STRUCTURE
Program Information, the “ i ” button
TV Guide
Nokia Multimedia Terminals operates a policy of continuous development.
Therefore we reserve the right to make changes and improvements to any
of the products described in this manual without any prior notice.
The EMC Directive 89/336/EEC is applied to this product.
DiSEqC™ is a trademark of EUTELSAT.
Nokia is a registered trademark of Nokia Corporation.
Copyright © 2000. Nokia Multimedia Terminals.
All rights reserved.
GB 3
Download from Www.Somanuals.com. All Manuals Search And Download.
FOR YOUR SAFETY
•
•
•
•
Keep a clear space around the Mediamaster to allow for sufficient ventilation.
Do not cover the Mediamaster or place it on a unit that emits heat.
Use a soft cloth and a mild solution of dish washing liquid to clean the casing.
Never allow liquids, spray or other materials to come into contact with the inside of the
Mediamaster.
•
•
•
•
•
Service should be carried out only at a Nokia authorized service center.
Do not connect or modify cables when the Mediamaster is plugged in.
Do not remove the cover.
Do not allow the unit to be exposed to hot, cold or humid conditions.
Please note that the only way to isolate the Mediamaster completely from the 230 V mains supply
is to unplug the mains lead!
Rear panel
LNB input
Satellite dish
input
RS232
For a PC.
TV SCART
For the audio
/video input of the signal output for a
TV set. TV set.
VIDEO OUTPUT
Composite video
TV AERIAL
For a terrestrial
(conventional)
TV aerial.
POWER CABLE
230 V AC
50 Hz
(F-connector).
LNB output
Satellite signal (IF) output
with loop through. For
connection to the other
satellite receiver if needed.
TV/VCR
AUDIO L R
AUX SCART
For an RF-Cable
to the aerial
input of the TV
or VCR.
Stereo outputs for
connection to a HiFi
system.
For connection to a
VCR or an analogue
satellite receiver.
GB 4
Download from Www.Somanuals.com. All Manuals Search And Download.
Front panel
Power
Up/Down
To turn the receiver
on/off (standby).
Select channel number,
up/down.
Display
Shows channel number, remote control signal and time in standby mode.
At start up, it displays the model number.
INSTALLATION OF THE MEDIAMASTER
The box for your Mediamaster should contain the following items:
Mediamaster 9400 S includes
RF-Cable
RCA Cable
Owner’ s
Manual
Remote Controller
and Batteries
About the SCART sockets
Ÿ
The rear panel of the Mediamaster is equipped with 2 SCART sockets.
When you connect other products to any of these sockets,
always use fully featured SCART cables (as supplied). There are
“ less well specified” SCART cables on the market and picture quality
could be reduced if you use them.
Ÿ
SCART cables are also necessary to get stereo sound from a stereo
TV and video recorder.
GB 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Mediamaster to the satellite dish
Installing the satellite dish
Ÿ
Your satellite dish should be installed with a cable for you
to connect to the Mediamaster. If you do not have this cable
you will need to buy one from a dealer (tell the dealer you
need a coaxial cable and F-connectors).
Ÿ
Connect the cable from the satellite dish to the socket
marked ” LNB IN” on the back of the Mediamaster.
If you need to fit the F-connectors onto the cable
Prepare each end of the cable as shown in the diagram.
You will need to fold back the outer braid (as shown).
15mm
8mm
F-connector
Ÿ
Ÿ
Slide the F-connector onto the cable, and then turn it
clockwise until it grips the braid.
Ensure that 3 mm of the core is protruding from the end of
the connector.
3mm
Connecting the Mediamaster to a TV set
There are many different types of TV/VCR and other
equipment that you can connect to the Mediamaster. In this
manual you will see some of the most common ways to
connect your equipment. If you use RF cables you will
have to tune your TV and VCR to the Mediamaster output
channel. If you have problems with your connections and
need help, contact your dealer or Service Provide.
Ÿ
Connect the SCART cable between the main SCART
socket on the TV and the TV SCART socket on the
Mediamaster.
Ÿ
Connect an RF cable from the TV/VCR output on the
Mediamaster to the RF input socket on the TV.
Ÿ
Connect the TV aerial to the TV AERIAL input socket on the Mediamaster.
GB 6
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a TV and a Video recorder
Refer to your video recorder manual for full instructions.
Ÿ
Connect one SCART cable between the main SCART
socket on the TV and the TV SCART socket on the
Mediamaster.
Ÿ
Ÿ
Ÿ
Connect another SCART cable between the VCR and
the AUX SCART socket on the Mediamaster.
Connect the RF cable from the RF output on the VCR
to the TV aerial input on the TV.
Connect the TV aerial to the RF input socket on the VCR.
If Your VCR does not have a SCART connector
Ÿ
Connect a SCART cable between the main SCART
socket on the TV and the TV SCART socket on the
Mediamaster.
Ÿ
Ÿ
Ÿ
Connect an RF cable from the RF output on the VCR to
the TV aerial input on the TV.
Connect an RF cable from the TV/VCR output on the
Mediamaster to the RF input socket on the VCR.
Connect the TV aerial to the TV AERIAL input socket on the Mediamaster.
Connecting to an Analogue satellite receiver and
a Video recorder
Ÿ
Connect a SCART cable between the main
SCART socket on the TV and the TV SCART
socket on the Mediamaster.
Ÿ
Ÿ
Ÿ
Connect a SCART cable between the VCR and the
AUX SCART socket on the Mediamaster.
Connect an RF cable from the RF output on the
VCR to the TV aerial input on the TV.
Connect an RF cable from the RF output on the
Analogue receiver to the RF input socket on the
VCR.
Ÿ
Connect the TV aerial to the RF input socket on the
Analogue receiver.
In order to switch the signal from the dish between the analogue and digital receivers, you need a
Universal Twin LNB.
Ÿ
Ÿ
Cable A between output A on the LNB to the LNB socket on the analogue receiver.
Cable B between output B on the LNB to the ANTENNA socket on the Mediamaster.
Both the VCR and the analogue satellite receiver must be tuned to different UHF channels (than the
Mediamaster) when using RF-connectors.
GB 7
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to Hi Fi system
Connect an RCA/Cinch stereo cable from the AUDIO L R
sockets on the Mediamaster to the LINE, AUX, SPARE or
EXTRA input sockets on your Hi Fi system.
Preparing the remote control
Ÿ
Ÿ
Remove the cover on the battery compartment at
the bottom of the remote control handset.
Insert the 2 x AAA (1,5 V) batteries, as shown in
the diagram, taking care to observe the + and -
markings indicated inside.
Ÿ
Replace the cover.
Before you continue
Please read this information concerning menus.
A menu is a field of text shown on the TV screen. These menus contain different kinds of information
and give the possibility to select between alternatives. At the bottom of the screen you will normally
also see a short explanation of your options. A menu may contain several lines. Selectable lines are
highlighted. Non-highlighted lines are not selectable.
GB 8
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL
This section describes how to operate the Mediamaster using the buttons on the remote control.
Some of the functions can also be carried out using the buttons on the front panel.
To switch the Mediamaster in and out of standby mode.
EXIT TV
To return to the viewing mode from a menu without storing settings
(in menu mode).
To switch between TV or Radio (in viewing mode).
To turn the sound off/on (mute).
To adjust the volume of digital programmes.
The Mediamaster’ s maximum level is controlled by the TV’ s present volume setting.
0 – 9
To change channel and to select individual menu options.
Note:If 0 is entered as the first digit, the TV Release functionality is activated (see below)
0 •
TV Release. To switch between digital TV/Radio, analogue TV and analogue satellite TV
and VCR, when your systems are connected by SCART cables.
Info. To display short and extended information (if transmitted)
about current and next programmes.
BACK
TEXT
To go back one level in the menus without storing settings.
To select teletext information. Press to enter Teletext
(if available).
MENU
GUIDE
To display or exit from the “ Main Menu” screen.
To obtain a list of present and following programmes for the
available channels. This information is only shown if your
Service Provider transmits programme information
(EPG information).
P+ P-
To change channels up and down by one unit.
To change page in a menu/list/text if more than one page
is available. To browse through teletext history.
To move up/down in the menus and to change channels.
To change settings in menus
OK
To confirm choices and selection of a highlighted item.
To display the TV/Radio channel list.
(Red) Reserved for future application.
OPTION
(Green) To select service options in viewing mode.
FREEZE (Yellow) To select the freeze function.
Press once to freeze the screen picture.
Press any other key to go to normal mode again.
(Blue) To toggle between present and previous TV/Radio channels.
GB 9
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC SETTINGS
Once you have correctly connected the Mediamaster, you also have to perform some “ Basic
Settings” . During this procedure, helpful information is displayed at the bottom of the menus.
Please note!
The OK button always confirms a selection within these menus, and pressing it will take you to the
next step in the installation process. However, and this is important, often more than one value has to
be entered in a menu. First, perform all necessary settings on the different lines. Then, confirm them
all simultaneously by pressing OK.
You can always go back to the previous menu by pressing the BACK button.
Use the buttons to move upwards and downwards from one line to another. Use to change settings.
You can also use the numeric buttons on the remote control to select a line in a menu and to enter
numeric values.
Tuning procedure when RF connections are used
This procedure is necessary only if your Mediamaster is connected to the TV with an RF cable.
To tune your TV to the RF signal you might also need your TV manual in addition to this manual. The
steps below explain what to do if you have been unable to use SCART cables in your connection.
Ÿ
Plug in your Mediamaster.
Tuning your TV to the Mediamaster.
Ÿ
Ÿ
Select a channel number on the TV that is not currently used for other TV channels.
Follow the instructions in your TV manual to tune the TV channel selector to UHF channel 43 (this
is the Mediamaster’ s factory preset UHF channel). If you are already using this channel, select
another non occupied UHF channel between 21to 69 on the TV.
Ÿ
Ÿ
Ÿ
When you have correctly changed the UHF channel number you will see the “ Welcome” menu on
the TV screen. If there is interference from other channels you will have to change the chosen
UHF channel.
Follow the instructions in your TV manual to store this UHF channel as the channel used by your
Mediamaster. You will have to select this channel when you want to watch digital TV/Radio
channels.
Once the welcome message is visible, press the OK button on the Mediamaster’ s remote control
to start the installation procedure.
If for some reason you have to change the RF channel later, you can do this by using “ System
Settings” menu further on in this manual. If you have a VCR connected it must be tuned to a
different UHF channel (between 21 to 69) than the Mediamaster.
You may now proceed to “ The Welcome Menu.”
GB 10
Download from Www.Somanuals.com. All Manuals Search And Download.
The Welcome Menu
To install the Mediamaster properly you have to adjust a few
settings. You will always be guided by the information at the
bottom of the menus. When you have finished the final part of
the setup procedure you can start watching TV channels and
listening to radio channels. Now you should have the
Welcome Menu on the TV screen. Press the OK button to
proceed.
Language Settings
Select the menu language that you desire. This will define the
language shown in the menus. This will also be the main
language for all the other parts such as audio and subtitling
languages. Press OK to proceed.
Installation
In order to configure your equipment (satellite dish and LNB)
you will need to use the following menus.
The LNB is the receiving unit, which is mounted on the satellite
dish. For the following setup procedure you have to know the
Local Oscillator (LO) frequency valid for your LNB(s).
Antenna Satellite Configuration
Highlight Antenna Satellite Configuration and press the OK
button. You can configure the antenna for each satellite from
this menu.
Antenna Alternative:
Select an Antenna alternative from 1 to 16 . Please note, that
the parameters in the menu are pre-programmed, but you can
change any of them to suit your combination.
GB 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Satellite name: From here you can select a name for the configuration.
Switch Type:
There are in principle two kinds of external DiSEqC switches on the market at present. One for
connection of two LNBs. The other one for connection of up to 4 LNBs.
If you have the other switch, defined as DiSEqC, Level 1 or 2 on the market, select “ DiSEqC 1, 2, (3
or 4)” , for each LNB connected to respective inputs on this switch.
LNB Type:
Selection is possible for different kinds of LNBs. Select the frequency for the LNB, which is valid for
your combination. You may also enter a value with the numbered buttons on the remote control. The
LNB alternatives are: “ Universal” (which is the most common), “ 5.150” , “ 9.750” , “ 10.000” ,
“ 10.050” , ” 10.600” , “ 10.750” , “ 11.200” , “ 11.475” .
If you have special LNB type, you should select “ User Define” on this menu. And you can enter a new
LNB frequency in the following LNB Frequency menu.
LNB Frequency:
You can enter a special LNB frequency, which is not presented in the LNB Type list as above.
22KHz Tone Switch:
If you have connected to a Dual LNB or two antennas connected to a 22KHz tone switch box, set it to
“ Enable” the 22KHz tone switch.
When you have finished the settings in this menu, press the “ OK” button to save the parameter.
Press BACK to continue with the channel search set-up
(You can also recall this menu later. From the Main Menu; select “ Installation” and then “ Antenna
Satellite Configuration” ).
Automatic Channel Search
Highlight “ Automatic Channel Search” using the down arrow
button on the remote control. Mediamaster has pre-
programmed Antenna/Satellite parameters for Astra, HotBird,
Arabsat, NileSat, PanAmsat 4, AsiaSat2, AsiaSat3,
TurkSat1B, TurkSat1C and Other1 to Other7.
Antenna Alternative: Select the option, “ 1 to 16” , that
corresponds to your antenna system.
Predefined Channel: Each antenna alternative has one or two pre-programmed channel parameters.
Choose a channel from which you want to start the channel search. Normally, each of the pre-
programmed channels gives the same result.
Search Type: Select “ Free Channels” in order to search for free channels only.
Select “ All Channels” in order to search all channels on the satellite.
GB 12
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual Channel Search
You can use manual channel search if you want to add new
channels later. For example If you have a special antenna
configuration which is not assigned in the “ Antenna
alternative” menu, you can add new channels using the
“ manual channel search” function. When you perform a
Manual Search you first need to enter some parameters for the
channel search to work. The information you need to enter in
this menu is available in magazines covering satellite TV
reception, on the Internet or from your Service Provider.
Antenna Alternative: Select Antenna Alternative “ 1 to 16” that corresponds to the antenna which
you wants to use for the search.
Transponder Freq (MHz): Specify the frequency in GHz. using the numbered buttons on your
remote control. If you enter the wrong number, erase it with the left arrow button.
Polarization: Select polarization; “ Horizontal” or “ Vertical” .
Symbol Rate (Msym/S): Enter the rate with the numbered buttons.
FEC: Enter the appropriate Forward Error Correction (FEC) value or select “ Auto” .
Network Search: Select: “ Yes” to search from all
transponders used by a specific Service Provider.
(“ Yes” is the default setting). Select “ No” to search only from
the transponder that you have entered on the line
“ Transponder Frequency” . (Useful if you do not want to
search through all transponders for a specific program
distributor).
By pressing the OK button you can now enter the channel
search menu where the Mediamaster starts to search for
channels from the satellite.
VIEWING TV
General Information
The following will describe the basic functions of your Mediamaster while watching TV or listening to
radio channels.
Sometimes the information may not be displayed as illustrated. Many of the functions
described here are dependent on the Service Provider and/or can only be used if they are
included in the transmitted programme information.
Please note that during the Channel Search procedure, the Mediamaster has downloaded ALL
available channels. This may include channels from various Service Providers, also those to which
you normally do not have access. If you select a programme to which you do not have access, you
will get the message “ Service is scrambled or not running” on the screen.
GB 13
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Screen Format
If you have a TV set with a 4:3 picture format, and the transmission is in 16:9, you can select “ 4:3
(Pan & Scan)” or “ 4:3 (Letterbox)” to change display format. “ 4:3 (Pan & Scan)” will fill up the
screen vertically, but cut off some information from the left and right sides of the picture. “ 4:3
(Letterbox)” will give a complete picture, but leave black areas at the top and bottom.
You can select the TV screen format in the “ System setting” menu which is a subsidiary of the “ User
preference” menu.
Start/Stop Watching TV
To start the Mediamaster from stand-by mode, press the “ ” button or one of the numbered buttons
on the remote control. It is also possible to start by pressing the button on the front of the
Mediamaster. Put the Mediamaster into stand-by by pressing again the “ ” button again.
In stand-by mode the display will show the correct time. During viewing the channel number will also
be displayed.
Select Channel
Change channel with the numbered buttons or with the up/down buttons on the remote control.
You can also use the buttons up/down on the front panel of the Mediamaster.
You can also select TV (Radio) channel in the TV (Radio) channel list. See the “ List of TV Channel”
and “ List of Radio Channel” of page 15 and 16.
Program Information. The “i” Button
Every time you change channel you will receive information for
4-5 seconds about the current programme. This information
includes: Channel number, name, programme title, and time for
present and following programmes. Press “ i” while watching
a channel. If your Service Provider transmits programme
information you will see: Correct time, a small amount of
information for the current and next programme, the name and
number of the channel, and finally the start and finish time for the programme.
If you want to get more detailed information, press “ i” once more while the information box (banner)
is shown. You will get extended information (if transmitted) about the current or next programme.
GB 14
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Guide
By pressing the GUIDE button you obtain access to the
TV Guide which gives the titles of the current programmes on
the different channels. By pressing the LEFT or RIGHT button
you also can also obtain information about the next programme.
The minimized viewing window also helps you to select
channels and information. Use the Up/Down buttons to move
the cursor to different programme areas. You can obtain
extended information for a programme by pressing the “ i” button.
The Radio Button
The display on your Mediamaster and on the TV screen will
show the name of the audio channel you are listening to. While
in audio mode, you can press the “ i” button to get extended
information (if transmitted) about the audio programme.
Return to TV mode by pressing the TV button again.
Volume Level
Increase or decrease the sound level by pressing the“ +” and “-
” buttons. A control bar will be displayed at the top of the
screen during level adjustment. (The max. level for volume is
the current volume setting on the TV set). Please note, that the
volume adjustments also change the volume level of to your
VCR during recording. It is possible to turn the sound on and
off with the button “ ” . Sound off is indicated with the same
symbol on the screen. If you turn the volume off with this button, it does not affect the volume of the
VCR during recording.
The current volume level will be remembered when you go to standby mode.
List of TV Channels
While viewing the TV you can see a programme list on the
screen by pressing the OK button. You can change to another
channel by pressing the UP/DOWN buttons and then pressing
the OK button. To move faster (8 channels at a time) between
channels you can also use the DOUBLE ARROW buttons.
GB 15
Download from Www.Somanuals.com. All Manuals Search And Download.
List of Radio Channels
While listening to radio Programmes you can see a programme
list on the screen by pressing the OK button. You can change
to another channel by pressing the UP/DOWN buttons and
then pressing the OK button. To move faster (8 at the time)
between the channels you can also use the DOUBLE ARROW
buttons.
Video Recorder
With a Video Cassette Recorder (VCR) connected you can watch/record video tapes.
If your VCR is connected with a SCART cable and you press the start button on the VCR, the
playback will start and interrupt the TV programme from the Mediamaster.
To watch TV programmes again, press the TV button or stop the VCR.
Please note, that during the recording of a programme, everything shown on the screen will be
registered! For example: If you call up a Menu from the Mediamaster on the screen, the menu will
be recorded!
Subtitling and Teletext. The TEXT Button
Pressing the TEXT button once while watching TV enables the teletext output to the TV.
To enable the teletext display on the TV, press the Teletext button on the TV’ s remote control.
This is only possible if more than one subtitling language is being transmitted. Please refer to the
instruction manual of your TV for the teletext function. Exit the menu by pressing the TV button.
SETTING FROM THE MAIN MENU
Press the MENU button and you will get the Main Menu on the
TV screen. Press the EXIT button to leave the menu.
If you select one of the highlighted titles and press the OK
button, a submenu will be shown on the TV screen. From a
submenu you can adjust settings to your own requirements.
GB 16
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Channels and Radio Channels
TV/Radio Channels will show a list with the names of the
different channels. To move faster within the list, use the
DOUBLE ARROW buttons. Press OK to enter a marked
channel.
TV Guide and Radio Guide
These guides will give you an overview of programme
information from the TV/Radio channels. Step to different
channel numbers with the UP/DOWN buttons. If you stop on a
highlighted line and press OK, you will exit the menu and enter
the highlighted channel. Select information about the next
programme with the RIGHT button. Use the “ i” button to get
extended information about a marked programme.
Please note, that information will only be shown if it is included in the transmission.
Edit Channels
From this menu, you can rename favorite lists, add channels,
remove channels and arrange the channels in a preferred
order.
The “ All TV” list displays all channels, which you captured from
the channel search operation in the installation menu
The “ All TV” list can contain hundreds of channels. By creating
your own favorite lists you can make channel handling a bit
more convenient.
GB 17
Download from Www.Somanuals.com. All Manuals Search And Download.
Rearrange List
If you have created several Favorite lists you can
determine the sequence in which the lists will appear. To
rearrange channels, select the list which you want to
move using the OK button. Move the channels to the desired
position using the UP/DOWN button and press OK.
Rename List
You can change the list name with the virtual keyboard
on the screen. Type in the text you want using the remote
control arrow keys. Please note that the “ All TV” , “ All Radio” ,
“ Free TV” and “ Free Radio” can not be changed.
Delete the existing characters by pressing OK on the left arrow
key of the keyboard. Select the characters using the LEFT and
RIGHT buttons. Press the OK button to enter the text selected.
To save the renamed list, press the BACK button.
To select various characters, press OK on the page UP/DOWN box of the keyboard.
Add Channels
From here you can create your own favorite lists, containing the
channels you watch most frequently. You can give each list a
specific name in the “ Rename List” menu. When a favorite list is
selected, you see only those channels defined in the list. You
can add channels to your Favorite Lists from the “ All TV” , “ All
Radio” , “ Free TV” and “ Free Radio” list. A channel is added by
pressing the OK button. The “ V” marking to the right on a line
contains added channels.
Lock Channels
To get to this menu you need an access code. The default
access code is “ 1234” . From here you can lock (and later
unlock) channels in any of the lists in order to prevent e.g. your
children from watching. Select the channel you want to lock
and press the OK button. A locked channel will be marked with
a padlock symbol. Repeat the procedure for each channel you
want to lock. When you lock a channel in any list, the channel
will automatically be locked in all other lists When watching TV, you will be asked to enter your
access code before you can watch a locked channel.
GB 18
Download from Www.Somanuals.com. All Manuals Search And Download.
Rearrange Channels
You can arrange the order of channels within your favorite lists.
To rearrange channels, select the channel which you want to
move using the OK button. Move the channels to the desired
position using the UP/DOWN button and press OK.
Remove Channels
From here, when the “All TV” list is selected in the “ Edit
Channels” menu, you can remove channels.
Please note. Channels deleted this way will be
permanently removed. The only way to get them back is to
perform a new channel search.
To remove channels:
Select the channel that you want to delete and press OK. You
will be asked if you really want to remove it. If so confirm by
pressing OK once more. If not, press BACK.
USER PREFERENCES
From here you can change the menu language. You also have access to the Parental Control and
the Appearance menus.
Parental Control
By pressing OK on the line “ Parental Control” you will be
requested to enter your access code. (Personal Identification
Code).
This code is set to 1234 by the factory. You will then get the
menu from where you can lock some functions in the
Mediamaster.
Receiver lock
If you select “ On” , you will have to enter the access code every time you start the Mediamaster
from stand-by.
Lock Installation Menu
If you select “ On” , you will have to enter the access code every time you enter the installation menu.
Age Limit
If you want everybody to have access to all available types of programmes, select “ Off” .
If you select “ On” , you may block programmes unsuitable for children. Select an age limit between 4
and 18 years on the line that appears.
However, you should be aware that not all Service Providers have the necessary codes for these
functions implemented in their transmissions.
GB 19
Download from Www.Somanuals.com. All Manuals Search And Download.
Change access code
From here you can change the access code from the standard 1234.
DO NOT FORGET IT! Without it you do not have access to any of the functions where the code
is required!
If you forget it, you have to contact an Authorized Nokia Service Center to get help.
Language Settings
From here you can change the language for the menus, main
audio language and alternative audio language.
System Settings
From here you can adjust settings concerning your TV.
TV Screen Format: Select your TV screen format.
The 4:3 format is the standard format for most TV screens.
Select 16:9 for a wide screen TV.
Output Selection: If the teletext function does not work when
watching channels from an analogue satellite receiver
connected to the Mediamaster, change this setting from “ RGB” to “ Composite” .
UHF Channel Number: Select this alternative if you have to change the RF channel.
If you change the RF channel number, you must also change it to the same value on the TV. If you
do not, the picture will become black.
RF Modulator Type: If the Mediamaster is connected to the TV by an RF cable, you can select the
RF modulator type. The RF Modulator affects a channel’ s audio. If you get picture but no sound, the
RF modulator selection might be wrong. Select “ UK (PAL I)” if the Mediamaster is used in the UK.
Select “ Normal” if it is used elsewhere.
Information Box Timeout (secs): When you switch channels, an information banner will be shown
for a few seconds. You can select for how long the banner will be shown.
Display Volume Indicator: Select whether or not you want the volume bar to appear on the screen
when you change the volume.
Date Setting (dd/mm/yyyy): Used to set the current date, month and year.
Time Setting: Adjust the clock.
GMT Offset: Adjust the time difference in your country.
GB 20
Download from Www.Somanuals.com. All Manuals Search And Download.
On/Off Timer Setting
You can enjoy this On/Off Timer for such a convenience as
wake-up or automatic VCR recording. Mediamaster will be
automatically switched-on and play specified channel for the
specified time, and then switched-off.
You may specify up to 8 separate lists with turn-on time, date,
duration, channel and occurrence options.
Time Setting
You can select the operation mode of the On/Off timer by
pressing LEFT/RIGHT button on the remote control.
Ÿ
Ÿ
Ÿ
Ÿ
Once: The Mediamaster will be switched-on/off for the
specified time only once.
Daily: The Mediamaster will be daily switched-on/off for the
specified time.
Weekly: The Mediamaster will be weekly switched on/off for
the specified time.
Off: Cancel the operation of On/Off timer.
Channel Name: You can select channel from the TV or Radio list by pressing LEFT/RIGHT button
on the remote control.
Select a channel you want to play and press OK.
On Time: You can select time, date or day depending on your selection in "Time Setting" menu. The
Mediamaster will be switched-on at the “ On time” .
Duration (hh:mm) : Mediamaster will keep playing for the time specified in this "Duration".
For example, if you set 00:30, Mediamaster will be switched-off 30minutes after switched-on.
GAME
SOKOBAN
To start the game, select the game level by using the LEFT and RIGHT button and press OK button
on the remote control. You can control the segment by LEFT/RIGHT/UP/DOWN button on the remote
control. To finish the game, press EXIT or BACK button on remote control.
GB 21
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION SUBMENUS
Select this Menu from the line “ Installation” in the Main Menu.
The submenu will give you the opportunity to change the
preferences performed during first time installation.
You can also add features that were not included in the first
installation. Please note that helpful information for every line is
given at the end of the menu.
Antenna Satellite Configuration
Please refer to page 11.
Automatic Channel Search
Please refer to page 12.
Manual Channel Search
Please refer to page 13.
Advanced Channel Search
The information needed to enter in this menu is available
in magazines covering satellite TV reception, or from your
Service Provider.
Ÿ
Ÿ
Antenna Alternative: Select the satellite from which the
signal is to be received.
Transponder Freq(MHz): Enter using the numbered
buttons on the remote control.
Ÿ
Ÿ
Ÿ
Polarization: Select “ Horizontal” or “ Vertical” .
Symbol Rate(Msym/s): Enter with the numbered buttons.
FEC: Select “ Auto” or the appropriate Forward Error Correction (FEC) value using the left/right
button on the remote control.
Ÿ
Ÿ
Ÿ
Video PID: Enter the PID (Packet Identifier) for the video signal.
Audio PID: Enter the PID for the audio signal.
PCR PID: Enter the PID for the PCR (Programme Clock Reference).
GB 22
Download from Www.Somanuals.com. All Manuals Search And Download.
Reinstall
This will start the Installation procedure from the “ Welcome
Menu” .
When you press OK in the “ Welcome Menu” again,
be aware of the fact, that all previous channels and
settings will be erased! To exit the ” Reinstall” menu
without erasing any channels, press “ Back” .
System Information
This gives general information about which hardware
and software version your Mediamaster is running on.
GB 23
Download from Www.Somanuals.com. All Manuals Search And Download.
GLOSSARY OF TERMS
AGC
by the international Standards Organization to
Acquisition Gain Control.
provide the basis for a picture coding and
Compression system.
Audio system
.
With digital satellite reception, the sound is
transmitted in packages and is elected either in a
special audio mode or pre-selected by using the
installation set-up. This makes it possible to select
between several different languages in a film. The
number of choices is dependent on what is available
in the signal.
Network
A number of digital channels transmitted from one
source. Grouped under separate headings in the
channel list.
Parental control
A feature that allows parents to “lock:” programmes
that they consider unsuitable for children. A “locked”
channel or programme can only be“unlocked” with the
special parental access code.
DiSEqC
Digital satellite Equipment Control.
The outdoor unit comprises the antenna, one or
more LNBs polarizers and external components.
ACCESS code
Personal Identification Number. A four -digit code
stored in the memory. You can change ACCESS code
on the “User Preference” Menu.
DVB
The Digital Video Broadcast group was created to
establish a technical frame work for the introduction
of digital video broadcasting systems.
Polarization
Polarization allows several programmes to be fit into
the same frequency band. The signal from the satellite
are transmitted either with linear (Vertical or
Horizontal ) polarization or circular (right or left)
polarization.
EPG
Electronic Programme Guide. A software that
enables viewers to navigate easily among the large
number of channels provide by digital technology, in
order to select the service they desire.
RF
FEC
Radio Frequency(known as HF in some countries).
Forward Error Correction. Correction of faulty bits in
the received signal.
SERIAL RS232
A serial communication standard data port.
GHz
The prefix giga means billion, and Hertz means
cycles per second. Signal in the GHz range are
often called microwaves.
Satellite dish
A dish-shaped antenna (reflector) that receiver signals
from a satellite. The dish focuses the signals into the
LNB.
LNB(Low Noise Block converter)
An electronic unit mounted on the satellite dish. It
recovers the signals reflected by the dish and converts
them to signal that can be used the mediamaster.
SCART
A 21-pin connector used for connecting the
Mediamaster, VCR and TV. Also named
Euroconnector or Peritel connector.
MHz
The prefix mega means million, and Hertz means
cycle per second.
Symbol rate
Size of the digital package transmission.
Medimaster
S.W
Aunit that converts the digital satellite signal into audio
and video signals. The audio and video signal can be
send to the TV set either via SCART or via
RF(modulator output).
Software. Program code.
PID:Packet Indentifier.
PCR:Program Clock Reference.
BER:Bit Error Ratio.
MPEG
Moving Picture Experts Group. Body established
GB 24
Download from Www.Somanuals.com. All Manuals Search And Download.
PROBLEM SOLVING
Problem
Possible causes
What to do
The display on the
front panel does not
light up/is not lit.
Mains lead is not connected.
Check that the mains lead is
plugged into the power socket.
No sound or picture.
The satellite dish is not pointing
at the satellite.
Adjust the dish. Check the signal
level indicator in one of the channel
search submenus.
No signal or weak signal.
Check the cable connections, LNB
and other equipment connected
between the LNB and the receiver, or
adjust the dish.
The LNB is faulty.
Replace the LNB.
Bad picture/blocking
error.
The satellite dish is not pointing at Adjust the dish.
the satellite.
Signal too strong.
Connect a signal attenuator to the
LNB input.
Satellite dish is too small.
LNB noise factor too high.
Change to a larger dish.
Change to an LNB with lower noise
factor.
The LNB is faulty.
Change the LNB.
There is no Welcome The system is connected by
menu on the screen SCART cables and the TV is not
after you switched on in AV/EXT mode.
If the system is connected by SCART
cables, switch the TV to the
appropriate AV input.
the Mediamaster for
the first time.
The system is connected by RF
If the system is connected by RF
cables and the TV is not set to the cables, switch the TV to the channel
channel tuned for digital satellite
TV.
for digital satellite TV. If you have not
tuned in the TV you may do this first.
Please see the TV manual for
instructions. You can also change the
RF-channel in the Mediamaster.
See TV settings.
There is interference
The system is connected by RF
Change the Mediamaster output
on your digital satellite cables and the output channel of channel to a more suitable channel
channels, an existing the Mediamaster interferes with an between 21-69, or connect the system
terrestrial channel or
video signal.
existing terrestrial channel or
video signal.
by SCART cables.
You made a video
recording of a digital
satellite channel and
the whole or parts of
the programme were
not recorded.
The Mediamaster was not left on
the appropriate channel.
If you make a recording from digital
satellite TV your Mediamaster has to
be left on the channel you want to
record.
The system is connected by
SCART cables and the VCR is not cables, switch the VCR to appropriate
If the system is connected by SCART
in AV/EXT mode.
AV input.
The system is connected by RF
cables and the VCR is not set to
the channel tuned for digital
satellite TV.
If the system is connected by RF
cables, switch the VCR to the channel
for digital satellite TV. If you have not
tuned in the VCR you may do this first.
Please see the VCR manual for
instructions.
GB 25
Download from Www.Somanuals.com. All Manuals Search And Download.
TECHNICAL SPECIFICATION
Transmission Standards
TV SCART
DVB,MPEG2
RGB, CVBS, Audio
LNB/Tuner input
AUX SCART
Connector
2 x F-type
(Loop Through)
950-2150MHz
500mA max
13V/18V
CVBS, Audio
Input frequency
Max Current
Supply Voltage
DiSEqC
Audio Output
Hi-Fi 2 RCA Jack
1.0
Serial Data
RF Impedance
75 ohm
9pin D-sub RS232C signal
Baud rates
15200baud max
Demodulator
QPSK
Remote Controller
Type
Symbol rate
SCPC and MCPC
2-45 Msym/s
RC4661
Operating distance
Batteries
10 meters
2 x 1,5V AAA
Video decoder
MPEG-2 Main Profile @ Main Level
Rear Panel Interfaces
LNB IF IN/OUT
Data rates
up to 15Mbit/s
Video formats
4:3(letterbox),
4:3(Pan & Scan)
16:9
RF modulator IN/OUT
2 x SCART for TV and AUX
2 x RCA Audio (L/R)
1 x RCA Video (CVBS)
RS232C (9pin D-Sub)
Audio decoder
MPEG-2 layer 1 & 2
Stereo, Mono, Dual channel, Joint stereo
General Data
Operating Temperature
Storage temperature
Supply Voltage
10 °C to 45°C
-40°C to +70°C
96-264V AC,
48Hz-60Hz
System resources
Processor
CPU RAM
MPEG RAM
Flash ROM
Resolution
OSD
108MHz MIPS 32bits
2Mbytes
2Mbytes
2Mbytes
720 x 576
16 colors
Power Consumption Max
26W
at 500mA LNB Load
Power Consumption in
Standby
8W
Dimension (W x D x H)
Weight
380x270x70 mm
3.4 Kg
RF Modulator
Output Channel
Output Signal
21-69
PAL B/G/I
Input/Output Connectors
Preset Channel
IEC169-2 male/female
43
GB 26
Download from Www.Somanuals.com. All Manuals Search And Download.
MENUS SCREEN STRUCTURE
First Time Installation
Language Settings
1.Menu Language
2.Main Audio Lang…
3.Alternative…
4……
Installation
Antenna Satellite
Configuration.
Automatic
Channel
Search.
Welcome
Menu
1.Antenna Satellite..
2.Automatic Chann..
3.Manual Channe…
4……
1.Antenna Alternative
2.Satellite Name
3.Switch…..…
1.Antenna..
2.Predefine.
3…..
Main Menu
1.TV Channels
2.Radio Channels
3.TV Guide
4.Radio Guide
5.Edit Channels
6.User Preferences
7.Game
1.TV Channels
<ALL TV>
2.Radio
Channels
<ALL Radio>
1.Hitliste
2.CNN Radio
3.TV4
3.TV Guide
<Free TV>
1.NRK
2.CNN
3.TV3
4.Radio Guide
<Free Radio>
1.Hitliste
2.CNN Radio
3.TV4
1.NRK
2.CNN
3.TV3
4.TV4
5.....
4.TV4
5.....
4.......
4.......
8.Installation
6.User Preference
1.Parental Control
2.Language Settings
3.System Settings
4.On/Off timer Settings
8.Installation
7.Game
5.Edit Channels
<All TV>
1.Rearrage List
2.Rename List
3.Add Channels
4.Lock Channels
5.Rearrange Channels
6.Remove Channel
1.Antenna Satellite Configuration
2.Automatic Channel Search
3.Manual Channel Search
4.Advancd Channel Search
5.Reinstall
6.System Information
Antenna Satellite Configuration
1.Antenna Alternative
2.Satellite Name
3.Switch Type
4.LNB Type
Parental Control
1.Receiver Lock
2.Lock Installation Menu
3.Age Limit
4Change Access Code
5.LNB Frequency
6.22KHz Tone Switch
Language Settings
1.Menu Language
2.Main Audio Language
3.Alternative Audio
Language
4.Display Subtitles
5.Main Subtitle Language
6.Alternative Subtitle
Language
Automatic Channel Search
1.Antenna Alternative
2.Predefined Channel
3.Search Type
Manual Channel Search
1.Antenna Alternative
2.Transponder Freq(MHz)
3.Polarization
4.Symbol Rate (Msym/S)
5.FEC
System Settings
1.TV Screen Format
2.Output Selection
3.UHF Channel Number
4.RF Modulator Type
5.Information Box Time out
6.Display Volume Indicator
7.Date Setting(dd/mm/yyyy)
8.Time Setting(hh:mm)
9.GMT Offset
On/Off Timer Setting
<On/Off Time List>
1.Timer Defined
2.Timer Defined
3….
6.Network Search
Advanced Channel Search
1.Antenna Alternative
2.Transponder Freq(MHz)
3.Polarization
…
8.Timer Defined
4.Symbol Rate (Msym/S)
5.FEC
6.Video PID
7.Audio PID
System Information
Reinstall
8.PCR PID
GB 27
Download from Www.Somanuals.com. All Manuals Search And Download.
Nokia is a registered trademark of Nokia Corporation
66 76967-10
KQX1A668Y
Download from Www.Somanuals.com. All Manuals Search And Download.
|