Nokia Digital Pen (SU-27W)
User Guide
9250690
Issue 1 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Reset the pen........................................ 11
1. Introduction ......................... 4
Bluetooth wireless technology.......... 4
3. Basic use ............................. 12
Notepads................................................ 12
Ink color and line thickness.............. 12
Create and manage notes................. 13
Create and send messages................ 13
Full memory .......................................... 14
2. Getting started..................... 5
Chargers................................................... 5
Open and close the USB cradle......... 6
Charge the battery................................ 6
Charge from a PC............................... 6
Charge from a wall outlet............... 7
Battery level indication.................... 8
Switch the pen on or off..................... 8
Pair the pen............................................. 9
Pair from a mobile device................ 9
Pair from the pen............................. 10
4. PC connectivity................... 15
Install Logitech io2 Software........... 15
Manage notes on a PC....................... 15
5. Battery information ........... 16
Change the ink cartridge................... 10 Care and maintenance ........... 17
3
Download from Www.Somanuals.com. All Manuals Search And Download.
I n t r o d u c t i o n
1. Introduction
The Nokia Digital Pen allows you to write notes on compatible digital
paper and transfer the notes to a compatible mobile device over a
Bluetooth connection.
You can also transfer the notes to a PC over a Bluetooth connection or
by placing the pen in the USB cradle that is connected to the USB port of
the PC.
Read this user guide carefully before using the digital pen. Also read the
user guide for your mobile device, which provides important safety and
maintenance information, and the user guide for your PC. Keep the
digital pen and its accessories out of reach of small children.
■ Bluetooth wireless technology
Bluetooth wireless technology makes it possible to connect compatible
devices without cables. A Bluetooth connection does not require that
the mobile device and the digital pen be in line of sight, but both devices
should be within 10 meters (30 feet) of each other. Connections may be
subject to interference from obstructions, such as walls, or other
electronic devices.
The digital pen is compliant with Bluetooth Specification 1.2 that
supports the following profiles: Object Push Profile 1.2, Generic Object
Exchange Profile 1.2, and Serial Port Profile 1.2. Check with the
manufacturers of other devices to determine their compatibility with
this device.
There may be restrictions on using Bluetooth technology in some
locations. Check with your local authorities or service provider.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
G e t t i n g s t a r t e d
2. Getting started
The digital pen contains the following
parts:
• Pen cap (1)
• Ink cartridge (2)
• Battery indicator (3)
• Page indicator (4)
• Ink cartridge removal hole (5)
• Reset button (6)
6
Before using the digital pen, you must
charge its battery and pair the pen with a
compatible mobile device.
To use the pen with a compatible Nokia S60 or Series 80 mobile device,
you must install the Nokia Digital Pen Suite software from the supplied
CD-ROM to your mobile device.
To use the pen with your PC or modify the pen settings, you must install
the Logitech io2 Software from the CD-ROM to your PC. The software
can be used with the Microsoft Windows XP or 2000 operating system.
The CD-ROM also contains the Nokia Digital Pen SU-1B File Converter
application that allows you to convert notes created with the Nokia
Digital Pen SU-1B into the format supported by the Nokia Digital Pen
SU-27W.
The software may not be available in your language.
■ Chargers
Check the model number of any charger before using it with this device. The
digital pen is intended for use with the AC-3, AC-4, and DC-4 chargers.
Warning: Use only chargers approved by Nokia for use with this
particular enhancement. The use of any other types may invalidate any
approval or warranty, and may be dangerous.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
G e t t i n g s t a r t e d
For availability of approved enhancements, please check with your dealer. When
you disconnect the power cord of any enhancement, grasp and pull the plug, not
the cord.
■ Open and close the USB cradle
The pen is supplied with a USB cradle
that you need when you charge the
battery inside the pen.
To open the USB cradle, pull the top
of the cradle away from its bottom.
To close the cradle, push the button
on the side of the cradle. When you do
not use the cradle, you can wrap the USB
cable around the indents on both sides of
the cradle.
■ Charge the battery
The digital pen has an internal,
nonremovable, rechargeable battery. Do not attempt to remove the
battery from the pen as you may damage the pen.
You can charge the pen from your PC using the supplied USB cradle or
from a wall outlet using the supplied charger adapter and a compatible
charger.
Charging the battery fully takes up to 2 hours depending on the charger.
If the battery is empty, it may take up to 10 minutes before the battery
indicator starts to flash and the battery starts to charge.
Charge from a PC
To charge the pen battery from a PC, do the following:
1. Open the USB cradle, and place it on a flat surface.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
G e t t i n g s t a r t e d
2. Switch on the PC, and plug the USB connector of the cradle to the
USB port on the PC.
3. To start charging, remove the pen
cap, and insert the pen into the
USB cradle so that the connectors
on the pen are facing the
connectors on the cradle.
If you use a laptop PC that is not
plugged into a wall outlet,
charging the pen battery from the
PC increases the demand on the
PC battery and reduces battery life.
When you connect the cradle to your PC for the first time and the PC
is running the Microsoft Windows XP or 2000 operating system, the
pen is detected as new hardware and you are asked whether you
want to install the digital pen drivers. If you want to only charge the
pen battery and do not intend to transfer data from the pen to the
PC, you do not need to install the pen drivers, and you can exit the
dialog box.
While the battery is charging, the battery indicator slowly flashes
red, yellow, or green depending on the charge level of the battery.
4. When the battery is fully charged, the battery indicator turns solid
green. Remove the pen from the cradle by lifting it, or unplug the
USB connector from the PC.
Charge from a wall outlet
To charge the pen from a wall outlet, do the following:
1. Open the USB cradle, and place it on a flat surface.
2. Remove the pen cap, and insert the pen into the USB cradle so that
the connectors on the pen are facing the connectors on the cradle.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
G e t t i n g s t a r t e d
3. Plug the USB connector of the
cradle to the AD-48 charger
adapter that is supplied with the
pen.
4. Plug the charger into a wall
outlet, and connect the charger
cable into the adapter.
While the battery is charging, the
battery indicator slowly flashes
red, yellow, or green depending on the charge level of the battery.
5. When the battery is fully charged, the battery indicator turns green.
Disconnect the charger cable from the adapter, unplug the charger
from the wall outlet, disconnect the USB connector from the
adapter, and remove the pen from the cradle.
Battery level indication
The battery indicator shows how much charge is left in the pen battery.
When the battery indicator is green, the pen is sufficiently charged.
When the battery indicator is yellow, the battery is less than 50%
charged.
When the battery indicator is red, battery power is low; when the
indicator flashes red, battery power is too low for operation. Recharge
the battery.
You can also check the battery level using the charge meter in the
Battery level indication section at the back of a supplied notepad. Move
the pen tip from left to right. The pen indicates the current charge level
by vibrating.
■ Switch the pen on or off
To switch on the pen, take off the pen cap. The pen vibrates once, and
the battery and page indicators turn on. When the page indicator is
green, the pen is ready to writing. The pen is automatically switched on
when you insert it into the USB cradle that is connected to a powered
USB port or to the AD-48 charger adapter.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
G e t t i n g s t a r t e d
To switch off the pen, replace the pen cap. The battery and page
indicators turn off. The pen is automatically switched off when you
detach the USB cradle from the PC while the pen is placed in the cradle.
To save power and protect the lens inside the pen from dirt, always keep
the cap on when you are not using the pen.
■ Pair the pen
You must pair the pen with a compatible mobile device to transfer data
from the pen. The pen can be paired with one mobile device at a time. To
use the pen with another mobile device, you must pair the pen with it
first.
The Bluetooth passcode that you need for pairing is printed on the card
that comes in the sales package. You can change this preset passcode
with the Logitech io2 Software that can be found on the supplied
CD-ROM.
Pair from a mobile device
1. Take the cap off the pen or remove the pen from the USB cradle, and
ensure that the pen and your compatible mobile device are switched
on.
The page indicator slowly flashes blue to show that the pen can be
paired with a compatible device within 2 minutes.
You can prevent other Bluetooth devices from discovering your
digital pen with the Logitech io2 Software that is supplied on the
CD-ROM in the sales package. For details, see the Logitech io2
Software documentation.
2. Activate the Bluetooth feature on your mobile device, and set the
mobile device to search for Bluetooth devices. See the user guide of
your mobile device for instructions.
3. Select the digital pen from the list of found devices.
4. Enter the Bluetooth passcode on the mobile device.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
G e t t i n g s t a r t e d
In some mobile devices you may need to make the Bluetooth
connection separately after pairing. You only need to pair the digital
pen with your mobile device once.
If the pairing is successful, the pen vibrates three times, and the page
indicator turns green and is shown for 2 seconds. The pen is now ready
for use.
If the pairing or connection fails, the page indicator briefly flashes red
twice and is shown for 2 seconds. Check that the pen and the mobile
device are switched on, and carefully enter the correct Bluetooth
passcode.
You can set the pen to connect with your mobile device automatically
when the pen is switched on. To do this in Nokia devices, change your
paired device settings in the Bluetooth menu.
The Bluetooth connection between the digital pen and the compatible
mobile device is active only when the pen sends notes to the mobile
device.
Pair from the pen
1. Activate the Bluetooth feature on your mobile device as instructed in
its user guide.
2. Use the pen to tap the Pairing box box that can be found at the end
of the notepad.
The page indicator flashes blue to show that the pen can be paired
with a compatible device within 2 minutes.
3. Select the digital pen from the list of found devices on your mobile
device, and enter the Bluetooth passcode.
■ Change the ink cartridge
When the ink cartridge of the pen runs out, replace it with a new
cartridge. You can buy ink cartridges refills at local office supply
retailers. Use only ink refills that are ISO 12757-1 D1 compliant and use
blue ink.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
G e t t i n g s t a r t e d
Only replace the ink cartridge when it is empty. Removing the cartridge
can damage its tip. If you attempt to reuse a cartridge with a damaged
tip, it may leak.
1. Take off the pen cap.
2. Insert the ink cartridge tip into
the hole in the cap clip.
3. Tilt the cap slightly clockwise,
and pull the cap clip to take out
the ink cartridge.
Dispose of the ink cartridge
properly.
4. Insert a new cartridge into the pen, and gently press the cartridge tip
against a supplied notepad to secure it in place.
■ Reset the pen
To reset the pen if it stops functioning, although it is charged, take off
the pen cap, and push the reset button with a paper clip. After the pen
restarts, you can continue using it in the normal way. This reset does not
clear the pen settings, including pairing information, and the notes
saved in the pen memory.
To clear the pen memory and pen settings, including pairing
information, take off the pen cap, push the reset button with a paper
clip, and at the same time, press the pen tip against a surface. Remove
the paper clip from the reset button. Hold the pen tip to the surface until
the battery and page indicators stop flashing red. Lift the pen from the
surface. The pen restarts and vibrates to indicate that you can use it
again. To use the pen, you must pair it with your mobile device.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
B a s i c u s e
3. Basic use
Note: Do not point the IR (infrared) beam at anyone's eye or allow it to
interfere with other IR devices. This device is a Class 1M LED laser
product.
■ Notepads
The pen is delivered with two types of notepads: a small notepad (B7
size) and a large notepad (A5 size). The notepads contain digital paper
that you can use with the digital pen.
Use the small notepad to create short notes that you want to transfer to
your mobile device over a Bluetooth connection and send as messages.
Use the large notepad to create longer notes that you want to process
and manage on your PC or mobile device.
Before using a new notepad, tap the New notepad box on the first page
of the notepad. Start using a new notepad of the same type only after
you have finished the old notepad.
When you run out of digital paper, you can buy it from authorized Nokia
■ Ink color and line thickness
Before you write a note with the digital pen, you can select the ink color
and line thickness in the Setting boxes section at the back of a supplied
notepad. The ink color and line thickness that you select are not shown
on digital paper but become visible after you transfer the note to a
mobile device or PC.
To change the ink color or line thickness, use the pen to tap the
respective box. The pen vibrates briefly to confirm your selection.
The selected ink color and line thickness are used until you replace the
pen cap.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
B a s i c u s e
■ Create and manage notes
You can use the pen to write notes that you want save and manage with
your PC or mobile device.
1. Open a large notepad that was supplied with the pen.
2. Tap the New notepad box on the first page of the notepad.
3. Write a note. You can also draw pictures.
4. To select the target device, tap the box indicated with a phone icon
and a letter to transfer the note to a mobile device, or tap the box
indicated with a desktop PC to download the note to a PC.
5. To transfer the note to your mobile device, tap the Send box. To
download the note to your PC, place the pen in the USB cradle
connected to the PC.
The page indicator rapidly flashes blue during transfer.
If the note was sent successfully, the page indicator is blue for
2 seconds, and the pen vibrates three times. If the sending failed, the
page indicator briefly flashes red twice and is shown for 2 seconds.
6. To manage the notes in your mobile device, use the PenPAL and
Penmail applications. Refer to the Nokia Digital Pen Suite guide that
can be found on the CD-ROM delivered with the pen.
To manage the notes in your PC, use the Logitech io2 Software. For
more information, see PC connectivity, p. 15.
■ Create and send messages
Note: Only devices that have compatible features can receive and
display multimedia messages. The appearance of a message may vary
depending on the receiving device. Multimedia message objects may
contain malicious software or otherwise be harmful to your device or
PC.
You can use the pen to write notes that you want to send as e-mail or
multimedia messages from your compatible mobile device. To send
messages, you must define the correct settings in your mobile device.
Refer to the user guide of your mobile device. For availability and pricing
13
Download from Www.Somanuals.com. All Manuals Search And Download.
B a s i c u s e
of these messaging services, contact your network operator or service
provider.
1. Open a small notepad that was supplied with the pen.
2. Tap the New notepad box on the first page of the notepad.
3. Ensure that the Bluetooth feature is active in your mobile device and
that the pen is connected to the device.
4. Write a note that you want to transfer to your mobile device. You
can also draw pictures.
5. To send the note as a small image, tap the box indicated with a large
and a small phone icon. To send the note as a large image, tap the
box indicated with two large phone icons.
6. To transfer the note to the mobile device, tap the Send box. The page
indicator rapidly flashes blue during transfer.
If the note is sent successfully, the page indicator is blue for
2 seconds, and the pen vibrates three times.
7. To send the note as an e-mail or multimedia message, use the
Penmail application supplied with the pen and the respective
messaging application in your mobile device.
■ Full memory
When the pen memory becomes full, the pen vibrates continuously.
Before you can create and save new notes, you need to transfer the
existing notes to the PC. Start the Logitech io2 Software, and place the
pen in the USB cradle connected to your PC. For more information, see
PC connectivity, p. 15.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
P C c o n n e c t i v i t y
4. PC connectivity
■ Install Logitech io2 Software
To use the digital pen with your PC, you need to install the Logitech io2
Software from the supplied CD-ROM. The software can be used with the
Microsoft Windows XP or 2000 operating system.
1. Insert the CD-ROM in the CD drive of your PC, and follow the
instructions on the screen.
2. Plug the supplied USB cradle into the USB port of your PC.
3. Take off the pen cap, and place the pen in the cradle.
If you connect the pen to the PC for the first time and you have a
compatible version of the Microsoft Windows operating system, the
operating system detects the pen as new hardware and installs the
appropriate drivers automatically.
Your PC is now ready to receive and save notes from the digital pen.
Refer to the Logitech io2 Software documentation for details. The
software may not be available in your language.
■ Manage notes on a PC
1. Use the pen to write a note using a supplied notepad. You can also
draw pictures.
2. To transfer the note, place the pen in the USB cradle.
Alternatively, to transfer the note over a Bluetooth connection,
ensure that the pen is paired and connected with a compatible PC
supporting Bluetooth wireless technology, and use the pen to tap the
PC box and the Send box at the bottom of the notepad page.
3. To view, edit, or send the note, or to convert it to another format, in
Windows, select Start > Programs > Logitech > io2 Pen Software.
Refer to the Logitech io2 Software documentation for details.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
B a t t e r y i n f o r m a t i o n
5. Battery information
Your device is powered by a rechargeable battery. The battery can be
charged and discharged hundreds of times, but it will eventually wear
out. Recharge your battery only with Nokia approved chargers
designated for this device.
Unplug the charger from the electrical plug and the device when not in
use. Do not leave a fully charged battery connected to a charger, since
overcharging may shorten its lifetime. If left unused, a fully charged
battery will lose its charge over time.
Never use any charger that is damaged.
Leaving the battery in hot or cold places, such as in a closed car in
summer or winter conditions, will reduce the capacity and lifetime of
the battery. Always try to keep the battery between 15°C and 25°C (59°F
and 77°F). A device with a hot or cold battery may not work temporarily,
even when the battery is fully charged. Battery performance is
particularly limited in temperatures well below freezing.
Do not dispose of batteries in a fire as they may explode. Batteries may
also explode if damaged. Dispose of batteries according to local
regulations. Please recycle when possible. Do not dispose as household
waste.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
C a r e a n d m a i n t e n a n c e
Care and maintenance
Your device is a product of superior design and craftsmanship and should be
treated with care. The suggestions below will help you protect your warranty
coverage.
•
•
Keep all accessories and enhancements out of the reach of small children.
Keep the device dry. Precipitation, humidity, and all types of liquids or
moisture can contain minerals that will corrode electronic circuits. If your
device does get wet, allow it to dry completely.
•
Do not use or store the device in dusty, dirty areas. Its moving parts and
electronic components can be damaged. Always keep the cap on when you
are not using the pen.
•
•
Do not store the device in hot areas. High temperatures can shorten the life of
electronic devices, damage batteries, and warp or melt certain plastics.
Do not store the device in cold areas. When the device returns to its normal
temperature, moisture can form inside the device and damage electronic
circuit boards.
•
•
Do not attempt to open the device.
Do not drop, knock, or shake the device. Rough handling can break internal
circuit boards and fine mechanics.
•
•
Do not use harsh chemicals, cleaning solvents, or strong detergents to clean
the device.
Do not paint the device. Paint can clog the moving parts and prevent proper
operation.
All of the above suggestions apply equally to your device, battery, charger, or any
enhancement. If any device is not working properly, take it to the nearest
authorized service facility for service.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
|