Nokia Home Theater System 120 C User Manual

Introduction Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Mediamaster 120 C  
Contents  
Connecting the Mediamaster  
Nokia Mediamaster software  
This Introduction Guide describes how to connect the Mediamaster and how to perform the first-time  
installation. It also describes the main features of the product.  
A more detailed User Guide in the English language is available from the Nokia.com support pages  
on the Internet.  
Read this before using the Mediamaster  
• Do not use any power supply other than the original unit delivered with the  
Mediamaster.  
• Allow 10 cm of space around the Mediamaster for sufficient ventilation.  
• Do not cover the Mediamaster's ventilation openings with items such as news-  
papers, tablecloths, curtains, etc.  
• Do not place the Mediamaster on top of a heat-emitting unit.  
• Do not place naked flame sources, such as lit candles, on the Mediamaster.  
• Use a soft cloth and a mild solution of washing-up liquid to clean the casing.  
• Do not expose the Mediamaster to dripping or splashing liquids.  
• Do not place any objects filled with liquids, such as vases, on the Mediamaster.  
• To give your Mediamaster extra protection, e.g. during a thunderstorm, we  
recommend that you connect it via an external surge protection device.  
• Do not connect or modify cables when the Mediamaster is plugged in.  
• Do not remove the cover.  
• Do not allow the unit to be exposed to hot, cold or humid conditions.  
• Service should only be carried out at a Nokia Authorised Service Centre.  
• Please note that the only way to isolate the Mediamaster completely from  
the mains supply is to unplug the power supply!  
GB 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote control  
This section describes how to operate the Mediamaster using the buttons on the remote control.  
mute  
Press once to turn the sound off/on (mute/unmute).  
Press and hold for a few seconds to switch the  
Mediamaster into standby mode. In addition,  
press this button to switch the Mediamaster on.  
ok  
To confirm a selection.  
To open Navi Bars  
cursor up  
cursor down  
cursor left  
cursor right  
opt  
Move up in the menus and change to the next channel in  
viewing mode.  
Move down in the menus and change to the previous  
channel in viewing mode.  
Move left/change settings in menus.  
Decrease the volume level in viewing mode.  
Move right/change settings in menus.  
Increase the volume level in viewing mode.  
To display temporary settings (options) while watching TV.  
Activate Channel Filtering & Sorting in Navi Bars mode.  
info  
Three different functions:  
Pressing once will show current programme name.  
Pressing twice will show information about the current  
and next programme.  
Pressing three times will give the 7-day programme guide  
(EPG).  
back  
0 - 9  
To go back one level at a time within menus.  
To close the Navi Bars.  
Toggle between the present and previous channel.  
To change the channel and to select individual menu  
options.  
NOTE: If 0 is entered as the first digit, the TV Release  
functionality is activated (see below).  
0
To toggle between the Mediamaster reception or any  
other reception to your TV (depending of TV model.)  
navi  
To open and close the Navi Bars.  
Press to enter Teletext (if available).  
Toggle between TV and radio mode.  
txt  
tv/radio  
GB 4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Connecting the Mediamaster  
Front and Rear panel  
antenna cable  
for connection of the antenna cable  
to the cable TV antenna socket  
Slot  
Reset button  
for a Conax smart card  
TV SCART socket * *  
for connection to the TV SCART  
DC in  
TV/VCR  
Digital audio  
for connecting the cable For connecting tothe Digital audio output  
from the external power RF socket on the TV,  
(TOS-link optical  
connection)  
supply  
or to a Video  
recorder  
A constant green light indicates that the Mediamaster is  
switched ON.  
A constant red light indicates standby mode.  
The light flashes red when commands from the remote control  
are received.  
The light flashes green during software updates.  
Connecting the Mediamaster  
Power supply  
The box for your Mediamaster should contain the following items:  
• the Mediamaster  
• a remote control with 2 AAA batteries  
• a SCART cable (fully connected; 1.0 m)  
• an Introduction Guide  
• a separate power supply  
• an RF cable  
SCART  
cable  
Preparing the remote control  
• Remove the cover from the battery compartment at the bottom  
of the remote control.  
• Insert the 2 AAA (1.5 V) batteries as shown in the diagram,  
taking care to observe the + and - markings indicated inside.  
• Replace the cover.  
* * The TV SCART Socket  
When you connect other devices to this socket, always use a fully  
connected SCART cable like the one supplied. There are SCART  
cables available that do not have all the pins connected,  
which could reduce picture quality if you were to use them.  
GB 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Connecting the Mediamaster  
Common Connections  
In this section, you will see some of the most common ways to  
connect your equipment.  
If you have problems with your connections and need help, contact  
your retailer or Nokia Support.  
Connecting to the TV with SCART  
• Connect an antenna cable from the cable TV antenna socket in  
the wall to the antenna cable input on the Mediamaster.  
• Connect an RF cable from the TV/VCR output on the Mediamaster  
to the antenna input socket on the TV.  
• Connect a SCART cable between the main SCART socket on the TV  
and the TV SCART socket on the Mediamaster.  
• Switch on your TV, then plug in and switch on your Mediamaster.  
You may need to select the AV (SCART) channel on your TV to  
watch digital TV. In some cases, your TV will automatically se-  
lect this channel when the Mediamaster is switched on.  
NOTE: The RF lead will need to be connected in order to watch  
analogue channels.  
It is always advisable to consult the user guide that came  
with your TV.  
Connecting to the TV without SCART  
• Connect an antenna cable from the cable TV antenna socket in  
the wall to the antenna cable input on the Mediamaster.  
• Connect an RF cable from the TV/VCR output on the Mediamaster  
to the RF input socket on the TV.  
• Switch on your TV, plug in and switch on your Mediamaster.  
• Select a programme number on the TV that is not currently used  
for other TV channels.  
• Follow the instructions in your TV manual to tune the TV to the  
channel where you see the First-time installation menu from the  
Mediamaster.  
• Follow the instructions in your TV manual to store this channel.  
• When the First-time installation menu is visible, press the ok  
button on the Mediamaster's remote control to start the  
installation procedure.  
If the picture quality is bad, you can later change the pre-defined  
UHF channel 43 to any other number between 21 and 69. You will  
also have to tune your TV to the same (= the new) channel number.  
GB 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Connecting the Mediamaster  
Connecting a Video recorder with SCART  
• Connect an antenna cable from the cable TV antenna socket in  
the wall to the antenna cable input on the Mediamaster.  
• Connect a SCART cable between the main SCART socket on the TV  
and the TV SCART socket on the Video.  
• Connect an RF cable from the TV/VCR output on the Mediamaster  
to the RF input socket on the video.  
• Connect an RF cable from the TV/VCR output on the video to the  
RF input socket on the TV.  
• Connect a SCART cable between the SCART socket on the video  
and the SCART socket on the Mediamaster.  
• Switch on your TV, then plug in and switch on your Mediamaster.  
• On your VCR, there should be an AV select button. This mode  
should be selected to record digital TV.  
You may need to select the AV (SCART) channel on your TV.  
In some cases, your TV will automatically select this channel  
when the Mediamaster is switched on.  
NOTE: In this set-up, your VCR has to be switched on or in  
standby mode to watch digital TV. To record a digital channel,  
you will need to select the AV (SCART) channel on your video.  
It is always advisable to consult the user guides that came  
with your video and TV.  
Connecting a Video recorder without SCART  
• Connect an antenna cable from the cable TV antenna socket in  
the wall to the antenna cable input on the Mediamaster.  
• Connect an RF cable from the TV/VCR output on the Mediamaster  
to the RF input socket on the video.  
• Connect an RF cable from the TV/VCR output on the video to the  
RF input socket on the TV.  
• Switch on your TV, then plug in and switch on your Mediamaster.  
• Pick a spare channel on your VCR and tune this until you see a  
programme channel from the Mediamaster. Store this channel.  
Select this channel on your video when you want to record a digital  
channel.  
GB 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Connecting the Mediamaster & First-time installation  
About Smart card  
The Mediamaster is equipped with a built-in decoder for the Conax  
encryption system.  
Insert a valid smart card fully into the slot on the back of the  
Mediamaster. The gold chip must face downwards and inwards.  
Connecting a Hi-fi system  
It is possible to connect a TOS link cable from the Digital audio out-  
put on the Mediamaster to a Hi-fi system that is equipped with the  
corresponding audio input.  
• Also use the TOS link Digital audio output for connection to an  
external Dolby digital/DTS decoder.  
First-time installation general information  
Once you have correctly connected the Mediamaster, you will also  
have to perform a "First-time installation." During this procedure,  
helpful information is displayed at the bottom of the menus.  
The ok button always confirms a selection within the menus, and  
pressing it will take you to the next step in the installation proce-  
dure. However, more than one value sometimes have to be entered  
in a menu. First, perform all necessary settings on the different  
lines. Then, confirm them all simultaneously by pressing ok.  
• You can always return to the previous menu by pressing back.  
• Use the cursor up/down button to move upwards and down-  
wards from one line to another.  
• Use the cursor left/right button to change settings  
You also use the number buttons on the remote control to enter nu-  
meric values.  
GB 8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
First-time installation  
Switching on for the first time and start  
• Plug in your Mediamaster and the "First-time installation" menu  
is shown.  
• Press ok to continue.  
Select the desired menu language using the  
buttons. This will  
become the main language for menus, audio and subtitling.  
The menu to the right will be shown as long as the Mediamaster is  
searching for TV and radio channels.  
All channels found will be listed on the screen.  
NOTE: the search procedure may take a few minutes. You can cancel  
the search at any time by pressing ok.  
When the search procedure has ended, a message will tell you how  
many TV and radio channels have been found.  
Press ok to start watching digital TV channels.  
If no TV channel is automatically shown after you have finished the  
installation procedure  
• Step up or down using the  
channel.  
buttons to select another  
GB 9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Watching TV & listening to the radio  
Navigating with the Navi Bars  
Navi Bars are used for selecting TV/Radio channels and to enter  
menus in which you can perform different settings.  
Navi Bars  
Bookmark  
name  
Bookmark  
1. Display Navi Bars by pressing the navi or ok button; to hide them,  
press the back button.  
2. When Navi Bars are displayed, you can move the folders in  
horizontal and vertical directions with the  
buttons.  
cursor  
The horizontal row contains folders, e.g. TV, Radio and the Settings  
folder. Each folder contains one or more bookmarks.  
• To move a folder into focus, use the  
buttons.  
• When a folder is in focus the bookmarks will be shown in the  
vertical row.  
• You select a bookmark using the  
buttons.  
Highlighted  
bookmark  
Folder  
name  
Folder  
• To confirm the selection of, e.g., a TV channel or to open a book-  
mark, press the ok button.  
Information box  
Below the horizontal folder bar, there is an Information box for the  
currently highlighted bookmark.  
When scrolling through TV or radio channels, the programmes can  
be marked with the following symbols in the Information box:  
= a new channel you have not yet visited  
= the channel is locked by the user  
= the channel is encrypted  
The Menus in the Settings folder  
From the Settings folder in the Navi Bar you have access to different  
bookmarks containing Menus.  
In the figure to the right the Settings folder with the User book-  
mark is in focus.  
When you try to open some of the menus contained in the folders  
you will be asked to enter an access code. This code is pre-set to  
1234 in the factory.  
Press ok to open the User Menu.  
Press info to get some information about the Settings folder  
currently in focus.  
From the Menus you can make different settings that will affect the  
performance of the Mediamaster. For example, in the User Prefer-  
ences Menu shown in the figure to the right you can change set-  
tings for the Banner time-out, Volume bar time-out and so on.  
At the bottom part of each menu you get some useful information  
about what will be affected.  
GB 10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Watching TV & listening to the radio  
Edit lists folder  
The TV folder may contain a lot of channels. By creating your own  
lists you can make it easier to handle channels.  
You can create and edit favourite channel lists in these menus.  
Select list  
If you have several lists and want to make changes in them, select  
which list by using the  
buttons.  
Create list  
Create your own lists containing the channels you most frequently  
watch. Give each list a specific name, e.g., "News" or "Kids". The new  
lists you create will appear as a new folder in the horizontal part of  
the Navi Bars.  
When a list is selected, you see only those channels defined in the  
list.  
You can create separate lists for TV and radio channels.  
Enter the name of a list  
• Press the number button corresponding to the character you  
want: once for the first character, twice for the second and so on.  
• Before entering the next character, wait for the short automatic  
delay before the cursor moves to the next character position.  
• The available characters are listed below:  
1
2
3
4
5
. , - ! ?  
6
7
8
9
0
m n o 6 Ö Ô Ñ Ó Ò  
p q r s 7 $  
a b c 2 Å Ä Á Á Â Ã  
d e f 3 É É Ë Ê  
g h i 4 Î Ï Í Ì  
j k l 5  
t u v 8 Ü Ù Ú  
w x y z 9  
space and 0  
• Toggle between upper-case and lower-case letters with the  
navi button.  
• To insert a space, press the number button 0.  
• If you make a mistake, you can remove characters by pressing  
txt as many times as needed.  
• When you have entered the list name, press ok.  
• Go to "Add/Delete Channels" to add channels to the list.  
GB 11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Watching TV & listening to the radio  
Delete selected list  
If you want to completely delete a list, first select the list with  
the  
buttons on the line "Select list". Then, move down to  
"Delete selected list" and press ok.  
Rename selected list  
Give the list a new name. Refer to "Create list" on the previous page.  
Add/Delete channels  
From this menu, you add and remove the channels in your lists.  
A channel is added or removed from the list by pressing info  
.
The square on the right-hand side of a line will be empty to denote  
a removed channel, and will contain an " " for added channels.  
Three different symbols can be shown next to the channel name:  
for a new channel you have not previously visited, for a channel  
locked by the user and for an encrypted channel.  
• Move to the desired channel(s) with the  
• Press opt if you want to preview the channel.  
• Add/remove a channel by pressing info.  
buttons.  
• When you are ready, confirm the selections and exit the menu by  
pressing ok.  
Rearrange channels  
This lets you arrange the order of the channels within your lists.  
• With the button, mark the channel you want to move  
to a new position.  
• Move the channel to the desired position with  
the  
buttons,  
• then press the  
button.  
• Press ok to confirm the new position.  
Lock channels  
To open this menu, you will be asked to enter your access code.  
The access code is set to 1234 at the factory.  
You can lock (and later unlock) channels on any of the lists in order  
to prevent your children from watching them, etc.  
• Select the channel you want to lock and press info.  
Repeat the procedure for each channel you want to lock.  
• Press opt if you want to preview the channel.  
• Press ok to confirm.  
A locked channel will be marked with an " " symbol.  
• You must enter your access code before you can watch a locked  
channel.  
GB 12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Watching TV & listening to the radio  
Sorting channels  
You can select how the channels shall be sorted in the TV and Radio  
folders.  
When any of the TV or Radio folders are in focus in the Navi Bars,  
press the opt button on the remote control.  
• Select to show the channels in alphabetical or numerical suc-  
cession in the folders.  
• Select the channel names you want to be shown in the TV/Radio  
folders.  
Free channels = Only channels that does not need any smart  
card to be watched.  
All channels = Smart card dependent channels + free channels.  
Note! Sorting does not apply for Favourite folders.  
Programme Guide: EPG  
By pressing the info button three times while watching a channel  
you get access to the Mediamaster EPG (Electronic Programme  
Guide.)  
In the EPG you will find information about the programmes for the  
current day and for the following seven days (provided that this  
information is included in the channel transmission from the  
distributor.)  
You may also select the Type of programme you want information  
about, e. g. Movie, Sports or Music.  
Use the arrow buttons to navigate within the guide. Exit the guide  
by pressing the info or back button.  
Listen to radio channels  
By pressing the tv/radio button you can alter between watching TV  
and listen to Radio channels.  
When Radio mode is selected the menu to the right will be shown.  
GB 13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Nokia Mediamaster software end-user license  
IMPORTANT: READ CAREFULLY BEFORE OR USING THE SOFTWARE, NOKIA CORPORATION MULTIMEDIA END-USER SOFTWARE AGREEMENT  
This Software Agreement ("Agreement") is between You (either an individual or an entity), the End User, and Nokia Corporation Multimedia ("Nokia"). The  
Agreement authorizes You to use the Software specified in Clause 1 below and which is included in this Nokia digital TV receiver. This is an agreement on end-user  
rights and not an agreement concerning sale.  
Read this Agreement carefully before using the Software. By using this Nokia digital TV receiver, You agree to the terms and conditions of this Agreement. If You  
do not agree to all of the terms and conditions of this Agreement, return this Nokia digital TV receiver and accompanying documentation to the place of purchase.  
YOU AGREE THAT YOUR USE OF THE SOFTWARE ACKNOWLEDGES THAT YOU HAVE READ THIS AGREEMENT, UNDERSTAND IT, AND AGREE TO BE BOUND BY ITS TERMS AND  
CONDITIONS.  
1. SOFTWARE. As used in this Agreement, the term "Software" means,  
collectively: (i) the software product identified above (ii) digital images, stock  
photographs, clip art, or other artistic works ("Stock Files") (iii) related  
explanatory written materials and any other possible documentation related  
thereto ("Documentation"); (iv) fonts, and (v) upgrades, modified versions,  
updates, additions, and copies of the Software, if any, licensed to You by Nokia  
under this Agreement.  
SPECIAL, OR CONSEQUENTIAL DAMAGES, HOWEVER CAUSED AND WHETHER  
ARISING UNDER CONTRACT, TORT, NEGLIGENCE, OR OTHER THEORY OF LIABILITY  
ARISING OUT OF THE USE OF OR INABILITY TO USE THE SOFTWARE, EVEN IF NOKIA  
OR ITS LICENSORS OR AFFILIATES ARE ADVISED OF THE POSSIBILITY OF SUCH  
DAMAGES. BECAUSE SOME COUNTRIES/STATES/JURISDICTIONS DO NOT ALLOW THE  
EXCLUSION OF LIABILITY, BUT MAY ALLOW LIABILITY TO BE LIMITED, IN SUCH  
CASES, NOKIA, ITS EMPLOYEES OR LICENSORS OR AFFILIATES' LIABILITY SHALL BE  
LIMITED TO U.S. $50.  
2. END-USER RIGHTS AND USE. Nokia grants to You non-exclusive, non-  
transferable end-user rights to use the Software on this Nokia digital TV  
receiver only.  
Nothing contained in this Agreement shall prejudice the statutory rights of any  
party dealing as a consumer. Nokia is acting on behalf of its employees and  
licensors or affiliates for the purpose of disclaiming, excluding, and/or  
restricting obligations, and liability as provided in this clause 7, but in no other  
respects and for no other purpose.  
3. LIMITATIONS ON END-USER RIGHTS. You may not copy, distribute, or make  
derivative works of the Software except as follows:  
(a) You may transfer all your rights to the Software at the same time as You  
transfer this Nokia digital TV receiver on a permanent basis, provided that You  
transfer this Nokia digital TV receiver and all copies of the related  
Documentation, do not retain any copies by yourself, and the recipient agrees  
to the terms and conditions of this Agreement.  
8. EXPORT CONTROL. The Software, including technical data, includes  
cryptographic software subject to export controls under the U.S. Export  
Administration Regulations ("EAR") and may be subject to import or export  
controls in other countries. The EAR prohibits the use of the Software and  
technical data by a Government End User, as defined hereafter, without a  
license from the U.S. government. A Government End User is defined in Part 772  
of the EAR as "any foreign central, regional, or local government department,  
agency, or other entity performing governmental functions; including  
governmental research institutions, governmental corporations, or their  
separate business units (as defined in part 772 of the EAR) which are engaged  
in the manufacture or distribution of items or services controlled on the  
Wassenaar Munitions List, and international governmental organizations. This  
term does not include: utilities (telecommunications companies and Internet  
Service Providers; banks and financial institutions; transportation; broadcast  
or entertainment; educational organizations; civil health and medical  
organizations; retail or wholesale firms; and manufacturing or industrial  
entities not engaged in the manufacture or distribution of items or services  
controlled on the Wassenaar Munitions List.)" You agree to strictly comply with  
all applicable import and export regulations and acknowledge that You have  
the responsibility to obtain licenses to export, re-export, transfer, or import the  
Software. You further represent that You are not a Government End User as  
defined above, and You will not transfer the Software to any Government End  
User without a license.  
(b) You may not use, modify, translate, reproduce, or transfer the right to use  
the Software or copy the Software except as expressly provided in this  
Agreement.  
(c) You may not resell, except as set forth in clause 3 (a), sublicense, rent, lease,  
or lend the Software.  
(d) You may not reverse engineer, decompile, disassemble, or otherwise  
attempt to discover the source code of the Software (except to the extent that  
this restriction is expressly prohibited by law) or create derivative works based  
on the Software.  
(e) Unless stated otherwise in the Documentation, You shall not display,  
modify, reproduce, or distribute any of possible the Stock Files included with  
the Software. In the event that the Documentation allows You to display the  
Stock Files, You shall not distribute the Stock Files on a stand-alone basis, i.e.,  
in circumstances in which the Stock Files constitute the primary value of the  
product being distributed. You should review the "Readme" files (if any)  
associated with such Stock Files that You use to ascertain what rights You have  
with respect to such materials. Stock Files may not be used in the production  
of libelous, defamatory, fraudulent, infringing, lewd, obscene, or pornographic  
material or in any otherwise illegal manner. You may not register or claim any  
rights in the Stock Files or derivative works thereof.  
9. CONTACT DETAILS. If You want to contact Nokia in respect of this Agreement,  
contact Nokia at the following address:  
(f) You agree that You shall only use the Software in a manner that complies  
with all applicable laws in the jurisdiction in which You use the Software,  
including, but not limited to, applicable restrictions concerning copyright and  
other intellectual property rights.  
Nokia Corporation Multimedia  
Keilalahdentie 2-4,  
P.O. Box 226  
4. COPYRIGHT. The Software and all rights, without limitation including  
proprietary rights therein, are owned by Nokia and/or its licensors and  
affiliates and are protected by international treaty provisions and all other  
applicable national laws of the country in which it is being used. The structure,  
organization, and code of the Software ae the valuable trade secrets and  
confidential information of Nokia and/or its licensor and affiliates. You must  
not copy the Software  
FIN-00045 Nokia Group, Finland  
Tel. +358 7180 08000  
10. APPLICABLE LAW & GENERAL PROVISIONS.  
5. COMMENCEMENT & TERMINATION. This Agreement is effective from the first  
date You use this Nokia digital TV receiver. You may terminate this Agreement  
at any time by returning, at Your own costs, this Nokia digital TV receiver, and  
all related materials provided by Nokia. Your end-user rights automatically and  
immediately terminate without notice from Nokia if You fail to comply with  
any provision of this Agreement. In such an event, You must immediately  
return at Your own cost, this Nokia digital TV receiver, and all related material  
to the place of purchase.  
This Agreement is governed by the laws of Finland. All disputes arising from or  
relating to this Agreement shall be settled by a single arbitrator appointed by  
the Central Chamber of Commerce of Finland. The arbitration procedure shall  
take place in Helsinki, Finland in the English language. If any part of this  
Agreement is found void and unenforceable, it will not affect the validity of the  
balance of the Agreement, which shall remain valid and enforceable according  
to its terms. This Agreement may only be modified in writing by an authorized  
officer of Nokia.  
6. NO OTHER OBLIGATIONS. This Agreement creates no obligations on the part  
of Nokia other than as specifically set forth herein.  
This is the entire agreement between Nokia and You relating to the Software,  
and it supersedes any prior representations, discussions, undertakings, end-  
user agreements, communications, or advertising relating to the Software.  
7. LIMITATION OF LIABILITY. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE  
LAW, IN NO EVENT SHALL NOKIA, ITS EMPLOYEES OR LICENSORS OR AFFILIATES BE  
LIABLE FOR ANY LOST PROFITS, REVENUE, SALES, DATA, OR COSTS OF  
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES, PROPERTY DAMAGE,  
PERSONAL INJURY, INTERRUPTION OF BUSINESS, LOSS OF BUSINESS INFORMATION,  
OR FOR ANY SPECIAL, DIRECT, INDIRECT, INCIDENTAL, ECONOMIC, COVER, PUNITIVE,  
GB 14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Technical specifications  
Transmission standards DVB-C  
DIGITAL AUDIO (S/PDIF)  
Connector  
1 x RCA  
Tuner input & Demodulator  
AUDIO  
Input connector  
RF input frequency  
Input impedance  
Bypass frequency  
Frequency range  
Output connector  
Modulation format  
Symbol rate  
1 x IEC 169-2 (female)  
110-872 MHz  
Optical TOS-link connector For PCM, DTS and Dolby Digital  
Bitstream audio output  
signals  
75 Ohm  
Output  
0.5 Vrms RL >10 kOhm 12dBFS  
MPEG-1 layer I and II  
+5° C to +45° C  
47-862 MHz  
Audio decoder  
Operating temperature  
Storage temperature  
Humidity  
RF modulator 470-862 MHz  
1 x IEC (male)  
- 40° C to +65° C  
16, 32, 64, 128 and 256 QAM  
2-6,95 MS/s  
25 to 90% rel humidity  
max 10 meters  
Operating distance for  
remote control  
Supply voltage for the  
separate Power Supply  
110-240V AC, 50-60Hz  
Dimensions (w x d x h)  
170 x 165 x 45 mm  
From the Power supply to  
the box  
16 V  
9 W  
2 W  
Power consumption max  
Power consumption in  
standby  
The Conax Conditional Access (CA) System is  
embedded.  
TV SCART  
Video output  
Audio output  
RGB output  
1 Vpp (1 dB)/75 Ohm  
0.5 Vrms /RL >10 Ohm  
Internal RGB  
RGB bandwidth  
Fast blanking output  
Status output  
5.8 MHz 3 dB  
Internal or from AUX SCART  
0/6/12 V/ RL 10 kOhm  
GB 15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Nokia is a registered trademark of Nokia Corporation  
00033264.00  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Miele Microwave Oven M Nr 09 798 370 User Manual
Moulinex Kitchen Utensil Meat Mincer User Manual
MTD Log Splitter 249 623 003 User Manual
Niles Audio Portable Speaker HPS 4 HPS 6 User Manual
Niles Audio Universal Remote RCA HT User Manual
Nintendo Handheld Game System SPR 001 User Manual
Novatel Car Stereo System ANT A72GOLA TW User Manual
Omron Network Card CJ1W ETN11 User Manual
Panasonic Mixer AW PH405 User Manual
ParaBody Fitness Equipment Free Weight Systems User Manual