Nokia Bluetooth Headset BH-900
User Guide
Issue 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
1.Introduction......................... 4 3.Basic use............................... 9
Bluetooth wireless technology.......... 4 Put the headset on the ear................. 9
Sliding boom........................................... 9
2.Get started........................... 5
Call handling........................................... 9
Keys and parts........................................ 5
Adjust the earphone volume............ 10
Chargers................................................... 5
Mute or unmute the microphone... 10
Charge the battery................................ 6
Push to talk (PTT) calls....................... 10
Switch the headset on or off ............. 6
Switch a call between the phone
Pair the headset with a compatible
and headset........................................... 11
phone........................................................ 6
Use the headset with several
Disconnect the headset from
phones .................................................... 11
Clear the settings ................................ 11
the phone............................................. 7
Reconnect the paired headset to
your phone........................................... 7
Troubleshooting ..................................... 7
4.Battery information.......... 12
Care and maintenance ......... 13
3
Download from Www.Somanuals.com. All Manuals Search And Download.
I n t r o d u c t i o n
1. Introduction
The Nokia Bluetooth Headset BH-900 allows you freedom to make and
receive calls while on the move or in the office. The headset has a sliding
boom that allows you to answer and end calls and to talk at a lower
volume or in a noisy environment.
You can connect the headset to a compatible phone that supports
Bluetooth wireless technology.
Read this user guide carefully before using the headset. Read also the
user guide for your phone, which provides important safety and
maintenance information. Keep the headset out of reach of small
children.
■ Bluetooth wireless technology
Bluetooth wireless technology makes it possible to connect compatible
communication devices without using cables. A Bluetooth connection
does not require that the phone and the headset be in line of sight, but
both devices should be within 10 meters (30 feet) of each other.
Connections may be subject to interference from obstructions, such as
walls or other electronic devices.
The wireless headset is compliant with Bluetooth Specification 2.0
supporting the following profiles: Headset Profile 1.1 and Handsfree
Profile 1.5. Check with the manufacturers of other devices to determine
their compatibility with this device.
There may be restrictions on using Bluetooth technology in some
locations. Check with your local authorities or service provider.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
G e t s t a r t e d
2. Get started
■ Keys and parts
The headset contains the following parts:
• Indicator light (1)
• Volume key (2)
• Power key (3)
• Sliding boom (4)
• Answer/end key (5)
• Charger connector (6)
• Earphone (7)
• Microphone (8)
Before using the headset, you must charge the battery and pair the
headset with a compatible phone.
Note: Parts of the headset are magnetic. Metallic materials
may be attracted to the headset. Do not place credit cards or
other magnetic storage media near the headset, because
information stored on them may be erased.
■ Chargers
Check the model number of any charger before using it with this device.
The headset is intended for use with the AC-3, AC-4, and DC-4 chargers.
Warning: Use only chargers approved by Nokia for use with
this particular enhancement. The use of any other types may
invalidate any approval or warranty, and may be dangerous.
For availability of approved enhancements, please check with your
dealer. When you disconnect the power cord of any enhancement, grasp
and pull the plug, not the cord.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
G e t s t a r t e d
■ Charge the battery
This device has an internal, nonremovable, rechargeable battery. Do not
attempt to remove the battery from the device as you may damage the
device.
1. Connect the charger to a wall outlet.
2. Connect the charger cable to the
headset as shown in the figure.
The red indicator light is displayed
during charging. If charging does not
start, disconnect the charger, plug it in
again, and retry. Charging the battery fully may take up to 2 hours.
3. When the battery is fully charged, the green indicator light is
displayed. Disconnect the charger from the wall outlet and the
headset.
The fully charged battery has power for up to 8 hours of talk-time or up
to 180 hours of standby time. However, the talk and standby times may
vary when used with different mobile phones or other compatible
Bluetooth devices, usage settings, usage styles, and environments.
When the battery is running out of power, the headset beeps, and the
red indicator light starts to flash.
■ Switch the headset on or off
To switch on, press and hold the power key. The headset beeps, and the
green indicator light starts to flash. The indicator light turns blue when
the headset is connected to your phone and ready for use.
To switch off, press and hold the power key. The headset beeps, and the
red indicator light is displayed briefly.
■ Pair the headset with a compatible phone
1. Switch on your phone and the headset.
2. Activate the Bluetooth feature on the phone, and set the phone to
search for Bluetooth devices. See the user guide of your phone for
instructions.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
G e t s t a r t e d
3. Select the headset (Nokia BH-900) from the list of found devices.
4. Enter the passcode 0000 to pair and connect the headset to your
phone. In some phones you may need to make the connection
separately after pairing. See the user guide of your phone for details.
You only need to pair the headset with your phone once.
If the pairing is successful, the headset beeps and appears in the phone
menu where you can view the currently paired Bluetooth devices.
Disconnect the headset from the phone
To disconnect the headset from your phone (for example, to connect the
phone to another Bluetooth device), do one of the following:
• Switch off the headset.
• Disconnect the headset in the Bluetooth menu of your phone.
• Move the headset more than 10 meters (30 feet) away from the
phone.
You do not need to delete the pairing with the headset to disconnect it.
Reconnect the paired headset to your phone
To connect the headset to your phone, switch on the headset, make the
connection in the Bluetooth menu of your phone, or press and hold the
answer/end key.
You can set your phone to connect with the headset automatically
when the headset is switched on. To do this in Nokia phones, change
your paired device settings in the Bluetooth menu.
■ Troubleshooting
If you cannot connect the headset to your phone, do as follows:
• Ensure that the headset is charged, switched on, and paired with
your phone.
• Ensure that the Bluetooth feature is activated on your phone.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
G e t s t a r t e d
• Check that the headset is within 10 meters (30 feet) of your phone
and that there are no obstructions between the headset and the
phone, such as walls or other electronic devices.
• To reset the headset if it stops functioning, although it is charged,
plug the headset into a charger, and briefly press the power key and
the middle of the volume key at the same time. This reset does not
clear your settings (for example, pairing settings).
8
Download from Www.Somanuals.com. All Manuals Search And Download.
B a s i c u s e
3. Basic use
■ Put the headset on the ear
Place the headset over your ear in a
comfortable position, and point it toward
your mouth as shown in the figure.
■ Sliding boom
The sliding boom brings the microphone
closer to your mouth, which improves the audio quality even when you
talk at a lower volume or in a noisy environment. You can use the boom
to answer, end, or reject a call.
To use the boom, gently pull it down toward your mouth (1), or push it
up to its initial position (2).
■ Call handling
To make a call, use your phone in the normal way when the headset is
connected to your phone.
If your phone supports redialing, press the answer/end key twice briefly
when no call is in progress.
If your phone supports voice dialing, press and hold the answer/end key
when no call is in progress, and proceed as described in the user guide of
your phone.
To answer a call, pull the boom down toward your mouth, press the
answer/end key, or use the phone keys. If the automatic answer function
9
Download from Www.Somanuals.com. All Manuals Search And Download.
B a s i c u s e
is set on, the phone automatically answers the incoming call after one
ring.
To reject an incoming call, pull the boom down and push it up
immediately, or briefly press the answer/end key twice.
To end a call, push the boom up to its initial position, press the answer/
end key, or use the phone keys.
■ Adjust the earphone volume
Press the volume key up to increase or down to decrease the volume. To
adjust the volume quickly, press and hold the key in the desired
direction.
■ Mute or unmute the microphone
To mute or unmute the microphone during a phone call, briefly press the
middle of the volume key. A long beep sounds. When the microphone is
muted, the blue indicator light flashes continuously. The mute function
cannot be used during a PTT call.
■ Push to talk (PTT) calls
You can use the headset to make and receive push to talk (PTT) calls. To
use this network service, your phone must support it and the function
must be set to on in the phone. For more information on the PTT
function, contact your network operator or service provider and see the
user guide of your compatible phone.
To make a PTT call to the default PTT channel defined in your phone,
press and hold the middle of the volume key (while no call is in progress)
as long as you speak.
When you receive a PTT call while no call is in progress, the headset
beeps, and you start to hear speech from the channel. To answer and
speak to the listened channel within the time defined by the network
operator or service provider, press and hold the middle of the volume key
as long as you speak. To answer and speak to the default channel after
the time defined by the network operator or service provider, press and
hold the middle of the volume key as long as you speak.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
B a s i c u s e
■ Switch a call between the phone and headset
To switch the phone call or PTT call between the headset and a
compatible Nokia phone, press and hold the answer/end key, or use the
respective function in your phone.
■ Use the headset with several phones
You can pair the headset with up to eight phones but connect it to only
one phone at a time.
The phone that was first paired with the headset is the default phone. If
the headset is switched on within 10 meters (30 feet) of several paired
phones, the headset tries to connect to the default phone.
If the headset cannot connect to the default phone, the headset tries to
connect to the last used phone. If the headset cannot connect to this
phone either, one of the other six paired phones can be connected to the
headset. To make the connection, see the user guide of your phone.
■ Clear the settings
If you want to clear all the settings from the headset (for example, the
list of paired devices), press and hold the power key and the volume key
up for 10 seconds. After the settings are cleared, the headset beeps
twice, and the red, green, and blue indicator lights alternate for several
seconds.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
B a t t e r y i n f o r m a t i o n
4. Battery information
Your device is powered by a rechargeable battery. The full performance
of a new battery is achieved only after two or three complete charge
and discharge cycles. The battery can be charged and discharged
hundreds of times, but it will eventually wear out. Recharge your battery
only with Nokia approved chargers designated for this device.
Unplug the charger from the electrical plug and the device when not in
use. Do not leave a fully charged battery connected to a charger, since
overcharging may shorten its lifetime. If left unused, a fully charged
battery will lose its charge over time.
Never use any charger that is damaged.
Leaving the device in hot or cold places, such as in a closed car in
summer or winter conditions, will reduce the capacity and lifetime of
the battery. Always try to keep the battery between 15°C and 25°C (59°F
and 77°F). A device with a hot or cold battery may not work temporarily,
even when the battery is fully charged. Battery performance is
particularly limited in temperatures well below freezing.
Do not dispose of batteries in a fire as they may explode. Batteries may
also explode if damaged. Dispose of batteries according to local
regulations. Please recycle when possible. Do not dispose as household
waste.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
C a r e a n d m a i n t e n a n c e
Care and maintenance
Your device is a product of superior design and craftsmanship and should be
treated with care. The suggestions below will help you protect your warranty
coverage.
•
•
Keep all accessories and enhancements out of the reach of small children.
Keep the device dry. Precipitation, humidity, and all types of liquids or
moisture can contain minerals that will corrode electronic circuits. If your
device does get wet, allow it to dry completely.
•
•
•
Do not use or store the device in dusty, dirty areas. Its moving parts and
electronic components can be damaged.
Do not store the device in hot areas. High temperatures can shorten the life of
electronic devices, damage batteries, and warp or melt certain plastics.
Do not store the device in cold areas. When the device returns to its normal
temperature, moisture can form inside the device and damage electronic
circuit boards.
•
•
•
Do not drop, knock, or shake the device. Rough handling can break internal
circuit boards and fine mechanics.
Do not use harsh chemicals, cleaning solvents, or strong detergents to clean
the device.
Do not paint the device. Paint can clog the moving parts and prevent proper
operation.
All of the above suggestions apply equally to your device, battery, charger, or any
enhancement. If any device is not working properly, take it to the nearest
authorized service facility.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
C a r e a n d m a i n t e n a n c e
14
Download from Www.Somanuals.com. All Manuals Search And Download.
|
