User guide
Nokia N93i-1
Download from Www.Somanuals.com. All Manuals Search And Download.
MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW. YOU FURTHER
ACKNOWLEDGE THAT NEITHER NOKIA NOR ITS AFFILIATES MAKE ANY
REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT
LIMITED TO WARRANTIES OF TITLE, MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, OR THAT THE APPLICATIONS WILL NOT INFRINGE ANY
THIRD-PARTY PATENTS, COPYRIGHTS, TRADEMARKS, OR OTHER RIGHTS.
ISSUE 1 EN, 9253887
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Nokia support and contact information.......................23
Get started............................................................................23
Additional applications .....................................................23
For your safety...........................................7
Get connected..........................................10
Your Nokia N93i......................................11
Camera......................................................24
Modes..................................................................................... 11
Shortcuts...............................................................................13
Settings.................................................................................. 14
Welcome................................................................................ 14
Transfer content from another device.......................... 14
Essential indicators.............................................................15
Keypad lock (keyguard) ..................................................... 16
Volume and loudspeaker control.................................... 17
Clock....................................................................................... 17
Headset.................................................................................. 18
Wrist and lens cover straps.............................................. 18
Wireless LAN ........................................................................ 18
Home network ..................................................................... 19
Memory card........................................................................ 20
File manager......................................................................... 21
Download! ............................................................................ 22
Help......................................................................................... 23
Tutorial................................................................................... 23
Record videos.......................................................................24
Take pictures ........................................................................26
Gallery.......................................................31
View images and video clips............................................32
Edit video clips.....................................................................32
Edit images ...........................................................................34
Slide show.............................................................................34
TV out mode .........................................................................35
Presentations........................................................................35
Albums ...................................................................................36
Print online ...........................................................................36
Online sharing......................................................................36
Media applications..................................37
Music player.........................................................................37
Image print ...........................................................................40
Back up files.........................................................................41
Download from Www.Somanuals.com. All Manuals Search And Download.
Download and purchase items........................................70
End a connection.................................................................70
Web settings.........................................................................71
Messaging................................................ 42
Write text ..............................................................................43
Write and send messages..................................................44
Inbox—receive messages...................................................46
Mailbox...................................................................................48
View messages on a SIM card .........................................50
Messaging settings .............................................................50
Calendar....................................................72
Create calendar entries .....................................................72
Meeting requests.................................................................72
Calendar views.....................................................................73
Manage your calendar entries.........................................73
Calendar settings ................................................................73
Contacts (phonebook)............................ 55
Save names and numbers .................................................55
Copy contacts.......................................................................56
Add ringing tones for contacts........................................57
Create contact groups........................................................57
Applications..............................................74
Visual Radio .........................................................................74
RealPlayer..............................................................................76
Adobe Flash Player ............................................................78
Movie director......................................................................78
Make calls ............................................... 58
Voice calls..............................................................................58
Video calls..............................................................................60
Video sharing........................................................................61
Answer or reject a call.......................................................64
Log...........................................................................................65
Internet.....................................................80
Web.........................................................................................80
WLAN wizard........................................................................81
Connectivity.............................................83
Services.................................................... 68
PC connections ....................................................................83
Data cable.............................................................................83
Bluetooth connectivity......................................................83
Infrared connection............................................................87
Home network......................................................................88
Web access point.................................................................68
Bookmarks view...................................................................68
Connection security............................................................69
Browse....................................................................................69
Download from Www.Somanuals.com. All Manuals Search And Download.
Device manager................................................................... 92
Modem .................................................................................. 93
Settings ................................................. 105
Phone....................................................................................105
Call ........................................................................................106
Connection..........................................................................107
Date and time ....................................................................111
Security................................................................................111
Call divert............................................................................114
Call barring ........................................................................114
Network ...............................................................................115
Enhancement .....................................................................115
Office........................................................94
Recorder................................................................................. 94
Converter............................................................................... 94
Calculator.............................................................................. 94
Notes ...................................................................................... 94
Zip manager ........................................................................ 95
Quickoffice .......................................................................... 95
Adobe reader ....................................................................... 96
Barcode reader..................................................................... 96
Troubleshooting.................................... 116
Q&A.......................................................................................116
Personalize your device...........................98
Profiles—set tones............................................................... 98
Change the look of your device....................................100
Active standby mode........................................................100
Battery information ............................. 120
Charging and discharging...............................................120
Nokia battery authentication guidelines ...................120
Tools....................................................... 101
Care and maintenance......................... 123
Additional safety information............. 124
Index...................................................... 127
Multimedia key..................................................................101
TV configuration................................................................101
Voice commands...............................................................101
Application manager........................................................102
Activation keys for copyright-protected files...........104
Download from Www.Somanuals.com. All Manuals Search And Download.
For your safety
Read these simple guidelines. Not following them may be
dangerous or illegal. Read the complete user guide for
further information.
SWITCH OFF WHEN REFUELING Do not use
the device at a refueling point. Do not use near
fuel or chemicals.
SWITCH ON SAFELY Do not switch the device
on when wireless phone use is prohibited or
when it may cause interference or danger.
SWITCH OFF NEAR BLASTING Follow any
restrictions. Do not use the device where
blasting is in progress.
ROAD SAFETY COMES FIRST Obey all local
laws. Always keep your hands free to operate
the vehicle while driving. Your first
consideration while driving should be road
safety.
USE SENSIBLY Use only in the positions as
explained in the product documentation. Do
not touch the antenna areas unnecessarily.
QUALIFIED SERVICE Only qualifiedpersonnel
may install or repair this product.
INTERFERENCE All wireless devices may be
susceptible to interference, which could affect
performance.
ENHANCEMENTS AND BATTERIES Use only
approved enhancements and batteries. Do not
connect incompatible products.
SWITCH OFF IN HOSPITALS Follow any
restrictions. Switch the device off near medical
equipment.
WATER-RESISTANCE Your device is not
water-resistant. Keep it dry.
SWITCH OFF IN AIRCRAFT Follow any
restrictions. Wireless devices can cause
interference in aircraft.
BACK-UP COPIES Remember to make
back-up copies or keep a written record of all
important information stored in your device.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
CONNECTING TO OTHER DEVICES When
connecting to any other device, read its user
guide for detailed safety instructions. Do not
connect incompatible products.
Your device supports internet connections and other
methods of connectivity. Like computers, your device may
be exposed to viruses, malicious messages and
applications, and other harmful content. Exercise caution
and open messages, accept connectivity requests,
download content, and accept installations only from
trustworthy sources. To increase the security of your
device, consider installing antivirus software with a regular
update service and using a firewall application.
EMERGENCY CALLS Ensure the phone
function of the device is switched on and in
service. The keypad is active only in the
fold-open mode. Press the end key as many
times as needed to clear the display and return
to the standby mode. Enter the emergency
number, then press the call key. Give your
location. Do not end the call until given
permission to do so.
Warning: To use any features in this device, other
than the alarm clock, the device must be switched on.
Do not switch the device on when wireless device use
may cause interference or danger.
The office applications support common features of
Microsoft Word, PowerPoint, and Excel (Microsoft Office
2000, XP, and 2003). Not all file formats can be viewed or
modified.
About your device
The wireless device described in this guide is approved for
use on the EGSM 900, 1800, 1900 and UMTS 2100
networks. Contact your service provider for more
information about networks.
During operation, such as an active video sharing session
or high-speed data connection, the device may feel warm.
In most cases, this condition is normal. If you suspect the
device is not working properly, take it to the nearest
authorized service facility.
When using the features in this device, obey all laws and
respect local customs, privacy and legitimate rights of
others, including copyrights.
Your device may have some bookmarks or links preinstalled
for or may allow access to sites provided by third parties
not affiliated with Nokia. Nokia does not endorse or
assume any liability for these sites. If you choose to access
Copyright protections may prevent some images, music
(including ringing tones), and other content from being
copied, modified, transferred, or forwarded.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
them, you should take the same precautions, for security or
content, as you would with any internet site.
For availability and information on using SIM card
services, contact your SIM card vendor. This may be the
service provider or other vendor.
Network services
Enhancements, batteries, and
chargers
Always switch the device off and disconnect the charger
before removing the battery.
To use the phone you must have service from a wireless
service provider. Many of the features require special
network features. These features are not be available on all
networks; other networks may require that you make
specific arrangements with your service provider before
you can use the network services. Your service provider can
give you instructions and explain what charges will apply.
Some networks may have limitations that affect how you
can use network services. For instance, some networks may
not support all language-dependent characters and
services.
Check the model number of any charger before use with
this device. This device is intended for use when supplied
with power from a DC-4, AC-3, or AC-4 charger, and from
an AC-1, ACP-8, ACP-9, ACP-12, LCH-8, LCH-9, or LCH-12
charger when used with the CA-44 charger adapter.
The battery intended for use with this device is BL-5F.
Your service provider may have requested that certain
features be disabled or not activated in your device. If so,
these features will not appear on your device menu. Your
device may also have a special configuration such as
changes in menu names, menu order, and icons. Contact
your service provider for more information.
Warning: Use only batteries, chargers, and
enhancements approved by Nokia for use with this
particular model. The use of any other types may
invalidate any approval or warranty, and may be
dangerous.
For availability of approved enhancements, please check
with your dealer. When you disconnect the power cord of
any enhancement, grasp and pull the plug, not the cord.
This device supports WAP 2.0 protocols (HTTP and SSL) that
run on TCP/IP protocols. Some features of this device, such
as MMS, browsing, e-mail, and content downloading using
the browser or over MMS, require network support for
these technologies.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Get connected
Use your device on the 2G and 3G networks. See ‘About
your device’, p. 8.
2G and 3G
Use Bluetooth technology to transfer files and connect to
compatible enhancements, for example. See ‘Bluetooth
connectivity’, p. 83.
Bluetooth
WLAN
Use infrared to transfer and synchronize data between
compatible devices, for example. See ‘Infrared connection’,
p. 87.
Use wireless LAN to connect to the internet and WLAN
enabled devices. See ‘Wireless LAN’, p. 18.
Use Nokia Connectivity Cable CA-53 to connect to
compatible devices, such as printers and PCs. See ‘Data
cable’, p. 83. Use Nokia Video Cable CA-64U to connect to
a compatible TV. See ‘TV configuration’, p. 101.
USB and TV OUT
memory card
Use a compatible miniSD card to transfer data or back up
information, for example. See ‘Memory card tool’, p. 21.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Your Nokia N93i
Model number: Nokia N93i-1
‘Cover display’, p. 106. If you are using the player to listen
to a sound clip, it continues to play.
Hereinafter referred to as Nokia N93i.
In the fold-closed mode, the cover display provides clock
and status information. On the standby mode display, the
signal strength and battery indicators, time information,
status indicators, and the name of the active profile (if
other than General) may be shown. If you use the music
player to listen to a sound clip, volume bars and track
information are displayed. Use the side scroll key to play,
pause, play the next or previous sound clip, and turn the
volume up or down.
Modes
Your device has four mechanical modes that are optimized
for different uses: fold closed for carrying, fold open for
traditional mobile phone use, imaging for recording video
and taking pictures, and view for viewing your images and
videos. To switch between the modes, turn the fold and the
swing axis display. There is a short time-out before a mode
is activated.
If you are using Visual Radio in the fold-closed mode, the
visual content is not shown on the cover display. You can
store several preset stations with station name, frequency,
and location information. This information is shown on
the cover display. To turn the audio on and off, change the
channel, and seek new channels, use the side scroll key.
Fold-closed mode
When the fold is closed, the main
display deactivates and the cover
display lights up. Ongoing calls end,
unless the loudspeaker is in use or a
compatible headset is connected. The
cover indicator is lit, if you have
missed calls, e-mails, unread
Calendar and clock alarms and notes for missed calls and
new received messages are also displayed. To view
received text messages and the text and image objects of
received multimedia messages, open the fold, and view
the message on the main display.
messages, or when charging. To
change the cover display settings, see
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Incoming calls are indicated by their normal tone and a
opened to answer a call when you open the fold. If a
compatible headset is connected to the device, press the
answer key on the headset. To change the settings, see
‘Cover display’, p. 106.
Fold-open mode
When you open the fold, the
fold-open mode is activated
automatically: the main
display lights up, the keypad is
available, and you can access
the menu. Scroll in the menu.
To make calls or use the menu, open the fold.
To use the flash as a flashlight, press the flash key on the
side of the device. To operate the flashlight, do the
following:
The fold-open mode is
activated even if the fold is not
fully opened. The fold opens
about 160 degrees, as shown in the picture. Do not force
the fold to open more.
•
•
•
Press the flash key once. The flashlight is activated for
1.5 seconds.
Press the flash key twice. The flashlight is activated for
3 minutes or until you press the flash key again.
Press and hold the flash key. The flashlight is activated
and stays on for as long as you hold the key or until the
3-minute time-out ends.
Imaging mode
When you open the fold
to 90 degrees, hold the
device sideways, turn
the fold down so that
the main display faces
you, and the imaging
mode is activated. The
main camera is
activated, and you can
see the image to be
captured.
Download from Www.Somanuals.com. All Manuals Search And Download.
12
In the imaging mode, you can record videos and take
pictures. See ‘Camera’, p. 24.
Shortcuts
Use shortcuts to quickly get the most from your device.
Refer to the relevant sections in this user guide for further
details of the functions.
In the imaging mode, the numeric keypad is not active. You
mode key, and flash key (all located on the side of the
Standby mode
device),
, and the landscape selection keys next to the
main display.
To switch between applications that are open, press and
hold , and select an application. If memory is low, the
device may close some applications. The device saves any
unsaved data before closing an application.
View mode
When the fold is closed and you lift the side of the swing
axis display, the view mode is activated.
Leaving applications running in the background increases
the demand on battery power and reduces the battery life.
Use the view mode to do
the following:
•
•
•
To start the camera, fully press the capture key in the
imaging mode.
To call your voice mailbox (network service), press and
•
•
View your images.
Activate photos and
movies from the
hold
.
To open multimedia applications, press
‘Multimedia key’, p. 101.
. See
gallery to watch
slideshows.
•
•
To change the profile, press
, and select a profile.
•
Make hands-free
To switch between General and Silent, press and hold
. If you have two phone lines, this action switches
between the two lines.
video calls, and send
live video during a
video call. Adjust the angle of the display for optimum
secondary camera angle.
•
•
To open the last dialed numbers list, press
To use voice commands, press and hold the right
selection key.
.
•
To start a connection to Services, press and hold
See ‘Services’, p. 68.
.
Download from Www.Somanuals.com. All Manuals Search And Download.
13
For other shortcuts available in the standby mode, see
‘Active standby mode’, p. 100.
Welcome
Edit text and lists
When you switch on your device for the first time,
Welcome opens. Select from the following:
•
To mark an item in a list, scroll to it, and press
at the same time.
and
•
To mark multiple items in a list, press and hold
Tutorial—to learn about the features in your device
while you press
or , then
To select letters and words, press and hold
same time, press or to highlight text. To copy
the text to clipboard, while still holding , select
Copy. To insert the text into a document, press and
hold , and select Paste.
or . To end the selection, release
Settings wizard—to configure various settings. For more
information on the application, see the Additional
applications leaflet.
.
•
. At the
Transfer—to transfer content, such as contacts and
calendar entries, from a compatible Nokia device
To open Welcome later, press , and select Tools >
Welcome. You can also access the individual applications
in their own menu locations.
Settings
Your Nokia device normally has MMS, GPRS, streaming,
and mobile internet settings automatically configured in
the device, based upon your service provider information.
You may have settings from your service providers already
installed in your device, or you may receive the settings
from the service providers as a special text message.
Transfer content from
another device
You can copy content such as contacts and calendar
entries from a compatible Nokia phone to your Nokia
device using Bluetooth connectivity or infrared. The type of
content that can be copied depends on the phone model.
You can insert your SIM card in the other device. When
your Nokia device is switched on without a SIM card, the
offline profile is automatically activated.
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Transfer content
1 Press , and select Tools > Transfer.
To view the log information of a previous transfer, in the
main view, select Transfer log.
2 In the information view, select Continue.
3 Select whether you want to use Bluetooth connectivity
or infrared to transfer the data. Both devices must
support the selected connection type.
To view the devices you have copied or transferred data
from, in the main view, select Phones.
Essential indicators
4 If you select Bluetooth connectivity, to have your Nokia
device search for devices with Bluetooth connectivity,
select Continue. Select the other device from the list.
You are asked to enter a passcode on your Nokia device.
Enter a code (1-16 digits), and select OK. Enter the
same code on the other device, and select OK. The
devices are now paired. See ‘Pair devices’, p. 86.
For some phone models, Transfer is sent to the other
device as a message. To install Transfer on the other
device, open the message, and follow the instructions
on the display.
The device is being used in a GSM network.
The device is being used in a UMTS network (network
service).
You have one or more unread messages in the inbox
folder in Messag..
You have received new e-mail in the remote mailbox.
There are messages waiting to be sent in the outbox
folder.
If you select infrared, connect the two devices. See
‘Infrared connection’, p. 87.
You have missed calls.
Shown if Ringing type is set to Silent and Message
alert tone, IM alert tone, and E-mail alert tone are set
to Off.
5 From your Nokia device, select the content you want to
copy from the other device.
Content is copied from the memory and compatible
memory card (if inserted) of the other device to the
corresponding location in your Nokia device and memory
card (if inserted). The copying time depends on the amount
of data to be transferred. You can cancel copying and
continue later.
The device keypad is locked.
A clock alarm is active.
The second phone line is being used (network service).
Download from Www.Somanuals.com. All Manuals Search And Download.
15
All calls to the device are forwarded to another
number. If you have two phone lines (network service), the
Data is being transmitted using Bluetooth
connectivity.
indicator for the first line is
.
and for the second
A USB connection is active.
An infrared connection is active. If the indicator is
blinking, the device is trying to connect to the other device
or the connection has been lost.
A compatible headset is connected to the device.
A compatible loopset is connected to the device.
A compatible text phone is connected to the device.
A data call is active.
Keypad lock (keyguard)
Use the keypad lock to prevent accidental keypresses.
A GPRS or EDGE packet data connection is available.
A GPRS or EDGE packet data connection is active.
A GPRS or EDGE packet data connection is on hold.
A UMTS packet data connection is available.
A UMTS packet data connection is active.
A UMTS packet data connection is on hold.
To turn on the display light when the keypad lock is on,
press
.
•
•
•
To lock, press the left selection key, then
keys are locked, is shown on the display.
To unlock in the fold-open mode, press the left
selection key, then
. When the
.
To unlock with the fold-closed mode, press and hold
the camera mode key.
You have set the device to scan for wireless LANs, and
a wireless LAN is available. See ‘Wireless LAN’, p. 110.
When the keypad lock is on, calls may be possible to the
official emergency number programmed into your device.
A wireless LAN connection is active in a network
that has encryption.
A wireless LAN connection is active in a network that
does not have encryption.
Bluetooth connectivity is on.
Download from Www.Somanuals.com. All Manuals Search And Download.
16
If the alarm time is reached while the device is switched
off, the device switches itself on and starts sounding the
alarm tone. If you select Stop, the device asks whether you
want to activate the device for calls. Select No to switch
off the device or Yes to make and receive calls. Do not
select Yes when wireless phone use may cause
interference or danger.
Volume and loudspeaker control
To increase or decrease the
volume level when you have
an active call or are listening
to a sound, press
or
.
The built-in loudspeaker allows you to speak and listen
from a short distance without having to hold the device to
your ear.
To cancel an alarm, select Clock > Options > Remove
alarm.
Warning: Do not hold the device near your ear when
the loudspeaker is in use, because the volume may be
extremely loud.
Clock settings
To change the clock settings, select Clock > Options >
Settings.
To use the loudspeaker during a call, select Options >
Activate loudsp..
To change the time or date, select Time or Date.
To turn off the loudspeaker, select Options > Activate
handset.
To change the clock shown in the standby mode, select
Clock type > Analogue or Digital.
To allow the mobile phone network to update the time,
date, and time zone information to your device (network
service), select Network operator time > Auto-update.
Clock
To change the alarm tone, select Clock alarm tone.
Press , and select Applications > Clock. To set a new
alarm, select Options > Set alarm. When an alarm is
World clock
active,
is shown.
To open the world clock view, open Clock, and press
In the world clock view, you can view the time in different
cities.
.
To turn off the alarm, select Stop, or to stop the alarm for
5 minutes, select Snooze.
Download from Www.Somanuals.com. All Manuals Search And Download.
17
To add cities to the list, select Options > Add city. You
Wrist and lens cover straps
Thread a strap as shown,
and tighten it.
can add a maximum of 15 cities to the list.
To set your current city, scroll to a city, and select
Options > My current city. The city is displayed in the
clock main view, and the time in your device is changed
according to the city selected. Check that the time is
correct and matches your time zone.
Headset
Wireless LAN
Connect a compatible
headset to the
Your device supports wireless local area network (wireless
LAN). With wireless LAN, you can connect your device to
the internet and compatible devices that have wireless
LAN. For information about using your device in a home
network, see ‘Home network’, p. 88.
Pop-PortTM connector of
your device.
Warning: When
you use the headset,
your ability to hear
outside sounds may be affected. Do not use the headset
where it can endanger your safety.
To use wireless LAN, a wireless LAN must be available in
the location and your device must be connected to the
wireless LAN.
Some places, like France, have restrictions on the use of
wireless LAN. Check with your local authorities for more
information.
Features using wireless LAN, or allowing such features to
run in the background while using other features, increase
the demand on battery power and reduce the battery life.
Your device supports the following wireless LAN features:
Download from Www.Somanuals.com. All Manuals Search And Download.
18
•
•
•
IEEE 802.11b/g standard
Operation at a frequency of 2.4 GHz
Wired equivalent privacy (WEP) with keys up to 128
bits, Wi-Fi protected access (WPA), and 802.1x
encryption methods. These functions can be used only
if they are supported by the network.
When you activate the offline profile, you can still use
wireless LAN (if available). Remember to comply with any
applicable safety requirements when establishing and
using a wireless LAN connection.
*#62209526# in the standby mode.
Wireless LAN connections
To use wireless LAN, you must create an internet access
point (IAP) in a wireless LAN. Use the access point for
applications that need to connect to the internet. See
‘Connection manager’, p. 91 and ‘WLAN wizard’, p. 81.
Home network
Your device is compatible with UPnP. With a wireless LAN
access point device, you can create a home network and
connect compatible UPnP devices that support wireless
LAN to the network, such as your Nokia device, a
compatible PC, a compatible printer, and a compatible
sound system or a TV, or a sound system or TV equipped
with a compatible wireless multimedia receiver.
Important: Always enable one of the available
encryption methods to increase the security of your
wireless LAN connection. Using encryption reduces the risk
of unauthorized access to your data.
A wireless LAN connection is established when you create
a data connection using a wireless LAN IAP. The active
wireless LAN connection ends when you end the data
connection. To end the connection, see ‘Connection
manager’, p. 91.
After you have configured the home network, you can
copy, view, or play compatible media files and print
images in Gallery on the other connected compatible
devices, for example, view images stored on your Nokia
device on a compatible TV. See ‘Home network’, p. 88 and
‘Image print’, p. 40.
You can use wireless LAN during a voice call or when
packet data is active. You can only be connected to one
wireless LAN access point device at a time, but several
applications can use the same IAP.
To set up home networking in your wireless LAN, first
create and configure your wireless LAN home IAP, then
configure the devices. On your Nokia device, configure the
settings in Home net.. To connect a compatible PC to the
Download from Www.Somanuals.com. All Manuals Search And Download.
19
home network, on the PC, you must install the Home
Media Server software from the DVD-ROM supplied with
your Nokia device.
Insert the memory card
1 Place your finger in the
upper corner of the
door, and swing the
door to the side.
After you have completed the necessary configurations in
all devices connected to the network, you can start using
Home net. to share your media files. See ‘View media
files’, p. 90.
2 Insert the memory card
in the slot. Ensure that
the contact area on the
card is facing down.
Memory card
You can use a compatible miniSD
memory card and use it as extra
storage space to save the memory on
your device. You can also back up
information from your device to the memory card.
3 Push the card in. You
hear a click when the card
locks into place.
Use only compatible miniSD cards approved by Nokia for
use with this device. Nokia uses approved industry
standards for memory cards, but some brands may not be
fully compatible with this device. Incompatible cards may
damage the card and the device and corrupt data stored
on the card.
4 Close the door.
Keep all memory cards out of the reach of small children.
Eject the memory card
1 Before you eject the card, press
, and select
Remove mem. card. All applications are closed.
2 When Remove memory card and press 'OK' is
displayed, swing open the door of the memory card slot.
Download from Www.Somanuals.com. All Manuals Search And Download.
20
3 Press the memory card to release it from the slot.
4 Remove the memory card. If the device is switched on,
select OK when prompted to confirm the removal.
Important: Do not remove the memory card in the
middle of an operation when the card is being accessed.
Removing the card in the middle of an operation may
damage the memory card as well as the device, and data
stored on the card may be corrupted.
To format a memory card, select Options > Format mem.
card. Select Yes to confirm.
Tip! For optimal performance, use your Nokia device
to format all new miniSD cards.
File manager
Many features of the device, such as contacts, messages,
images, videos, ringing tones, calendar notes, documents,
and downloaded applications, use memory to store data.
The free memory available depends on how much data is
already saved in the device memory.
Memory card tool
Press , and select Tools > Memory. You can use a
compatible miniSD memory card as extra storage space
and for backing up the information in the device memory.
You can use a compatible memory card as extra storage
space. Memory cards are rewritable, so you can delete old
information and save new data on a memory card.
To back up information from the device memory to a
memory card, select Options > Backup phone mem.
To browse files and folders in the device memory or on a
memory card (if inserted), press , and select Tools > File
To restore information from the memory card to the device
memory, select Options > Restore from card.
mgr.. The device memory view (
open the memory card view (
) opens. Press
) (if available).
to
Format a memory card
When a memory card is reformatted, all data on the card
is permanently lost.
To move or copy files to a folder, press
same time to mark a file, and select Options > Move to
folder or Copy to folder.
and
at the
Some memory cards are supplied preformatted and others
require formatting. Consult your retailer to find out if you
must format the memory card before you can use it.
Download from Www.Somanuals.com. All Manuals Search And Download.
21
To find a file, select Options > Find and the memory from
which to search, and enter a search text that matches the
file name.
•
•
•
•
•
•
•
Messages from Inbox, Drafts, and Sent in Messag.
Retrieved e-mail messages from the device memory
Saved web pages
Saved images, videos, or sound files
Contact information
Calendar notes
Downloaded applications. See also ‘Application
manager’, p. 102.
Installation files (.sis) of applications you have installed
to a compatible memory card; first back up the
installation files to a compatible PC
Any other data that you no longer need
View memory consumption
To view what types of data you have in the device and
how much memory the different data types consume,
select Options > Memory details. The amount of
available memory is shown in Free memory.
•
•
Memory low—free memory
The device notifies you if the device or the memory card
memory is low.
Download!
To free device memory, transfer data to a compatible
memory card, if you have one. Mark files to be moved, and
select Move to folder > Memory card and a folder.
Download! (network service) is a mobile content shop
available on your device. You can browse, download, and
install items, such as applications and media files, to your
device from the internet.
You can also transfer media files to a compatible PC, for
example, using the transfer option in Gallery. See ‘Back up
files’, p. 41.
Press
, and select Internet > Download!. The items are
Tip! Use Nokia Phone Browser in Nokia PC Suite to
view the different memories in your device and
transfer data.
categorized under catalogs and folders provided by
different service providers. Some items may be chargeable,
but you can usually preview them free of charge. For more
information on Download!, see the Additional applications
leaflet.
To remove data to free memory, use File mgr. or the
respective application. For example, you can remove the
following:
Download from Www.Somanuals.com. All Manuals Search And Download.
22
On the website, you can get information on the use of
Nokia products and services. If you need to contact
customer service, check the list of local Nokia contact
centers at www.nokia.com/customerservice.
Help
Your device has context-sensitive help. When an
application is open, select Options > Help to access help
for the current view.
For maintenance services, check your nearest Nokia
service center at www.nokia.com/repair.
When you are reading the instructions, to switch between
help and the application that is open in the background,
Get started
press and hold
.
See the Get started guide for keys and parts information
and instructions for setting up the device for use.
To open help from the main menu, select Tools > Help.
Select the desired application to view its help topics.
Additional applications
Tutorial
There are various applications provided by Nokia and
different third-party software developers to help you do
more with your Nokia device. These applications are
explained in the Additional applications leaflet which is
available at the Nokia device product support pages at
www.nokia.com/support or your local Nokia website.
The tutorial gives you information about some of the
features of your device. To access the tutorial in the menu,
press , and select Applications > Tutorial and the
section you want to view.
Nokia support and contact
information
Check www.nokia.com/support or your local Nokia website
for the latest version of this guide, additional information,
downloads, and services related to your Nokia product.
Download from Www.Somanuals.com. All Manuals Search And Download.
23
Camera
Your Nokia device has two cameras, a high-resolution
camera on the side of the device (the main camera) and a
lower-resolution camera on the top of the main display
(the secondary camera). You can use both cameras to take
still images and record video in the portrait and landscape
views.
Record videos
To activate the main camera, rotate the display to the
imaging mode. If the camera is in the still image mode, use
the camera mode key to switch to the video mode.
Press the capture key to start recording. The record icon
is displayed and a tone sounds. The red recording
indicator is lit, indicating that video is being recorded.
The Nokia device supports an image capture resolution of
2048x1536 pixels using the main camera. The image
resolution in these materials may appear different.
1 To stop recording at any time, press the capture key.
2 Press the capture key again to resume recording.
The video clip is automatically saved to Images & video
in Gallery. See ‘Gallery’, p. 31.
The images and video clips are automatically saved in
Images & video in Gallery. The cameras produce .jpg
images. Video clips are recorded in the .mp4 file format or
in the 3GPP file format with the .3gp file extension
(Sharing modes). See ‘Video settings’, p. 25.
To make lighting and color adjustments before recording a
video in the imaging mode, use the side scroll key to scroll
through the toolbar. See ‘Setup settings—color and
lighting’, p. 29 and ‘Shooting modes’, p. 29.
You can send images and video clips in a multimedia
message as an e-mail attachment or by using Bluetooth
connectivity or infrared. You can also share images and
video clips in compatible online albums, weblogs, or in
other online sharing services on the web. See ‘Online
sharing’, p.36.
To zoom in or out of the subject (continuous 3x optical and
up to 20x digital zoom), rotate the zoom key on the side of
the device.
Download from Www.Somanuals.com. All Manuals Search And Download.
24
The video viewfinder displays the following:
After you record a video clip, select the following from the
toolbar:
•
Status indicators
(1) for audio
•
To immediately play the video clip you just recorded,
select Play.
mute on,
stabilization on,
videolightmode,
and the current
capture mode
The toolbar (2),
which you can
scroll through
before recording to select the shooting mode, white
balance, and color tone (the toolbar is not displayed
during recording)
•
•
If you do not want to keep the video, select Delete.
To send the video using multimedia, e-mail, Bluetooth
connectivity, or infrared, press
, or select
Options > Send. For more information, see
•
•
‘Messaging’, p. 42 and ‘Bluetooth connectivity’, p. 83.
This option is not available during an active call.
To record a new video clip, select New video.
•
Tip! Activate the Offline profile to ensure your video
recording is not interrupted by incoming calls.
The total available video recording time (3). When you
are recording, the current video length indicator also
shows the elapsed time and time remaining.
Video settings
There are two kinds of settings for the video recorder:
video setup and main settings. To adjust Video setup, see
‘Setup settings—color and lighting’, p. 29. The setup
settings return to the default settings after you close the
camera, but the main settings remain the same until you
change them again. To change the main settings, select
Options > Settings and from the following:
•
•
The device memory ( ) and memory card (
indicators (4) show where videos are saved.
)
The video quality indicator (5) indicates whether the
quality of the video is TV (high), TV (normal), Handset
(high), Handset (normal), or Sharing.
•
The video clip file type (6)
Tip! Select Options > Turn icons on to display all
viewfinder indicators or Turn icons off to display
only the video status indicators.
Audio recording—Select Off if you do not want to record
sound.
Video quality—Set the quality of the video clip to TV
(high) (best quality for long term usage and playback on
Download from Www.Somanuals.com. All Manuals Search And Download.
25
a compatible TV or PC and handset), TV (normal),
Handset (high), Handset (normal), or Sharing (limited
video clip size to send using multimedia message (MMS)).
If you want to view the video on a compatible TV or PC,
select TV (high), which has VGA resolution (640x480) and
the .mp4 file format. To send the video clip through MMS,
select Sharing (QCIF resolution, .3gp file format). The size
of the video clip recorded with Sharing is limited to 300
KB (about 20 seconds in duration) so that it can be
conveniently sent as a multimedia message to a
compatible device.
Optical zoom during recording—Select On or Off. Select
Off to eliminate mechanical noise caused by lens
movement during optical zooming when recording.
Memory in use—Define the default memory store: device
memory or memory card (if inserted).
Take pictures
To activate the main camera, rotate the display to the
imaging mode. If the camera is in the video mode, use the
camera mode key to switch to the still image mode.
Video stabilisation—Select On to reduce camera shake
when recording the video.
To lock the focus on an object, press the capture key
halfway down (main camera only). The green locked focus
indicator appears on the display. If the focus was not
locked, the red focus indicator appears. Release the
capture key, and press it halfway down again. You can,
however, take the picture without locking the focus.
Add to album—Select whether you want to add the
recorded video clip to a certain album in Gallery. Select
Yes to open a list of available albums. The video clip is
automatically saved to the selected album after capture.
Change the setting after you finish recording video clips
for the selected album.
To take a picture, in the main camera, press the capture
key. Do not move the device before the image is saved.
Show captured video—Select whether you want the first
frame of the recorded video clip to be shown on the
display after the recording stops. Select Play from the
toolbar (main camera) or Options > Play (secondary
camera) to view the video clip.
To make lighting and color adjustments before taking a
picture in the still image mode, scroll through the toolbar.
See ‘Setup settings—color and lighting’, p. 29.
Saving the captured image may take longer if you change
the zoom, lighting, or color settings.
Download from Www.Somanuals.com. All Manuals Search And Download.
26
The camera viewfinder displays the following:
Tip! Select Options > Turn icons on to display all
viewfinder indicators or Turn icons off to display
only the camera status indicators.
•
Status indicators
(1) for sequence
on, self-timer on;
When taking a picture, note the following:
Automatic(
),
•
The quality of a digitally zoomed picture is lower than
that of a nonzoomed picture.
The camera goes into the battery saving mode if there
are no keypresses for a moment. To continue taking
On ( ), or Off
(
) flash mode,
•
and the current
capture mode
The toolbar (2),
which you can
scroll through before capturing the image to select the
shooting mode, white balance, exposure value, and
color tone (the toolbar is not displayed during focus
and image capture)
The image resolution indicator (3) indicates whether
the quality of the image is Print 3M - Large
(2048x1536 resolution), Print 2M - Med. (1600x1200
resolution), Print 1.3M - Small (1280x960 resolution),
or MMS 0.3M (640x480 resolution).
pictures, press
.
•
•
After you take the picture, select the following from the
toolbar:
•
•
If you do not want to keep the image, select Delete.
To send the video using multimedia, e-mail, Bluetooth
connectivity, or infrared, press
, or select Send.
•
•
To capture a new image, select New image.
To print the picture, select Print. See ‘Image print’,
p. 40.
Still image camera settings
•
•
The image counter (4) displays the estimated number of
images you can capture using the current image quality
setting and memory in use (the counter is not displayed
during focus and image capture).
The device memory ( ) and memory card (
indicators (5) show where images are saved.
There are two kinds of settings for the still image camera:
Image setup and main settings. To adjust Image setup,
see ‘Setup settings—color and lighting’, p. 29. The setup
settings return to the default settings after you close the
camera, but the main settings remain the same until you
change them again. To change the main settings, select
Options > Settings and from the following:
)
Download from Www.Somanuals.com. All Manuals Search And Download.
27
Image quality—Print 3M - Large (2048x1536
resolution), Print 2M - Med. (1600x1200 resolution),
Print 1.3M - Small (1280x960 resolution), or MMS
0.3M (640x480 resolution). The higher the resolution, the
more memory the image consumes. If you want to print
the image, select Print 3M - Large, Print 2M - Med., or
Print 1.3M - Small. If you want to send it through e-mail,
select Print 1.3M - Small. To send the image through
MMS, select MMS 0.3M.
Shutter tone—Select the tone you want to hear when you
take a picture.
Memory in use—Select where to store your images.
Take pictures in a sequence
Sequence mode is available only in the main camera.
To set the camera to take up to six pictures in a sequence
(if enough memory available), select Options > Sequence
mode.
These resolutions are only available in the main camera.
Add to album—Select whether you want to save the
image to a certain album in Gallery. If you select Yes, a
list of available albums opens. The image is automatically
saved to the selected album after capture. Change the
setting after you finish taking pictures for the selected
album.
To take the pictures, press the capture key.
After you take the pictures, they are shown in a grid on the
display. To view a picture, press
to open it.
You can also use the sequence mode with the self-timer.
To return to the sequence mode viewfinder, press the
capture key.
Show captured image—Select Yes if you want to see the
captured image after it is taken, or No if you want to
continue taking pictures right away.
You in the picture—self-timer
Extended zoom (main camera only)—Select On
(continuous) to allow the zoom increments to be smooth
and continuous between digital and extended digital
zoom or On (paused) to allow the zoom increments to
pause at the digital and extended digital step point. If you
want to limit the zoom to where the selected image
quality is maintained, select Off.
The self-timer is available only in the main camera.
Use the self-timer to delay the capture so that you can
include yourself in the picture. To set the self-timer delay,
select Options > Self timer > 2 seconds, 10 seconds, or
20 seconds. To activate the self-timer, select Activate. The
self-timer indicator ( ) blinks and the device beeps when
Download from Www.Somanuals.com. All Manuals Search And Download.
28
the timer is running. The camera takes the picture after the
selected delay elapses.
mode uses its own lighting settings that have been
adjusted according to a certain kind of environment.
You can also use the self-timer in the sequence mode.
White balance—Select the current lighting condition
from the list. This allows the camera to reproduce colors
more accurately.
Tip! Select Options > Self timer > 2 seconds to keep
your hand steady when taking a picture.
Exposure value (images only)—Adjust the exposure time
of the camera.
Flash
Colour tone—Select a color effect from the list.
The flash is available only in the main camera.
The screen display changes to match any settings you
make so you see how the change affects the pictures or
videos.
Keep a safe distance when using the flash. Do not use the
flash on people or animals at close range. Do not cover the
flash while taking a picture.
The available settings vary depending on the selected
camera.
The camera has an LED flash for low light conditions. The
following flash modes are available: Automatic (
), On
(
), and Off ( ).
The setup settings are camera specific; if you change the
settings in the secondary camera, the settings in the main
camera do not change. The setup settings do, however,
transfer between the image and video modes. The setup
settings return to the default settings when you close the
camera.
To switch between the flash modes, press the flash key.
Setup settings—color and lighting
To enable the camera to reproduce colors and lighting
more accurately or to add effects to your pictures or
videos, scroll through the toolbar, and select from the
following options:
Shooting modes
A shooting mode helps you to find the right color and
lighting settings for the current environment. Select a
proper shooting mode for taking pictures or recording
video clips from the shooting mode list. The settings of
Shooting mode—Select a proper shooting mode for the
environment in which you take pictures. Every shooting
Download from Www.Somanuals.com. All Manuals Search And Download.
29
each shooting mode have been set according to a certain
style or environment.
Shooting modes are only available in the main camera.
Scroll through the toolbar, and select the video or image
shooting modes.
When you take pictures, the default shooting mode is
Automatic.
To make your own shooting mode suitable for a certain
environment, select User > Options > Change. In the user
defined shooting mode you can adjust different lighting
and color settings. To copy the settings of another
shooting mode, select Based on shooting mode and the
desired shooting mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
30
Gallery
To view, store, and organize your images, video clips, sound
clips, playlists, and streaming links, or share your files with
other compatible Universal Plug and Play (UPnP) devices
memory card, or select Copy to phone mem., or Move to
phone mem..
Files stored on the memory card (if inserted) are indicated
through wireless LAN, press
, and select Gallery. To
with
with
. Files stored on the device memory are indicated
open the gallery from the Camera application, select
Options > Go to Gallery. From Camera, only Images &
video is available.
.
To reduce the size of images that you already copied to
other locations, such as to a compatible PC, select
Options > Transfer and memory > Shrink. To reduce the
resolution of an image to 640x480, select Shrink. To
increase free memory space after you have copied items to
other locations or devices, select a file and Options >
Transfer and memory > Free memory. See ‘Back up files’,
p. 41.
Tip! To switch from Gallery to the camera, in Images
& video, press the capture key or the camera mode key, or
select Options > Go to Camera.
Select Images & video
Streaming links
Home net. , and press
, Tracks , Sound clips
, All files
,
, Presentations
, or
to open it.
Video clips, .ram files, and streaming links are opened and
played in the RealPlayer application. See ‘RealPlayer’,
p. 76. You can also create albums; and mark, and add items
to albums. See ‘Albums’, p. 36.
To download files into Gallery in one of the main folders
using the browser, select Graphic downl., Video downl.,
Track downl., or Sound downl.. The browser opens, and
you can select a bookmark from which the site can
download.
To open a file, press
. Videos open in RealPlayer, and
music and sound clips in Music player. See ‘View images
To share media files saved in Gallery with other
compatible UPnP devices through wireless LAN, you must
first create and configure your wireless LAN home IAP,
then configure the Home net. application. See ‘Wireless
LAN’, p. 18.
and video clips’, p. 32.
To copy or move files to a compatible memory card (if
inserted) or to device memory, select a file and Options >
Move and copy, select Copy to memory card or Move to
Download from Www.Somanuals.com. All Manuals Search And Download.
31
The options related to Home net. are not available in
Gallery before the settings for Home net. have been
configured.
To create custom video clips, select a video clip or several
clips in the gallery, and Options > Edit. See ‘Edit video
clips’, p. 32.
To print your images on a compatible printer, or to store
them on your memory card (if inserted) for printing, select
Options > Print. See ‘Image print’, p. 40.
View images and video clips
Pictures taken and video clips recorded with the camera
are stored in Images & video in Gallery. Images and video
clips can also be sent to you in a multimedia message, as
an e-mail attachment, through Bluetooth connectivity, or
by using infrared. To be able to view a received image or
video clip in the gallery or in the media player, you must
save it in the device memory or on a compatible memory
card (if inserted).
media file uploading service (network service), press
,
and select Web upload (if available). Contact your service
provider for more information.
To view the image, scroll to an image, and press
.
When the image is opened, to zoom an image, select
Options > Zoom in or Zoom out. The zooming ratio is at
the top of the display. The zooming ratio is not stored
permanently.
Open Images & video in Gallery. The images and video
clip files are in a loop, and ordered by date. The number of
files is displayed. To browse the files one by one, scroll left
or right. To browse files in groups, scroll up or down.
To use the picture as a background image, select the
picture and Options > Assign > Set as wallpaper.
To edit a video clip or a photo, select Options > Edit. An
image editor or a video editor opens. See ‘Edit video clips’,
p. 32. See ‘Edit images’, p. 34.
To delete an image or video clip, press
.
Edit video clips
To edit video clips in Gallery and create custom video clips,
scroll to a video clip, and select Options > Edit. See
‘Gallery’, p. 31. To create custom video clips, combine and
trim video clips, and add images, sound clips, transitions,
To add an image or a video clip to an album in the gallery,
select Options > Albums > Add to album. See ‘Albums’,
p. 36.
Download from Www.Somanuals.com. All Manuals Search And Download.
32
and effects. Transitions are visual effects that you can add
in the beginning and end of the video or between the video
clips.
Edit image (shown only if you added an image)—Move,
remove, or duplicate an image; define how long it stays on
the screen; and set a background or a color effect to the
image.
You can also use Movie director to create custom video
clips. Select the video clips and images you want to create
See ‘Movie director’, p. 78.
Edit sound clip (shown only if you have added a sound
clip)—Cut or move the sound clip, adjust its length, or
remove or duplicate the clip.
In the video editor you can see two timelines: video clip
timeline and sound clip timeline. The images, text, and
transitions added to a video clip are shown on the video
clip timeline. To switch between the timelines, scroll up or
down.
Edit transition—There are three types of transitions: at
the start of a video, at the end of a video, and transitions
between video clips. You can select start transition when
the first transition of the video is active.
Insert—Select Video clip, Image, Text, Sound clip, or New
sound clip.
Edit video, sound, image, text, and
transitions
Movie—Preview the movie in the full screen or as a
thumbnail, save the movie, or cut the movie to a proper
size for sending it in a multimedia message.
To create custom video clips, mark and select one or more
video clips, and select Options > Edit > Video editor.
To take a snapshot of a video clip, in the cut video view,
select Options > Take snapshot. In the thumbnail preview
To modify the video, select from the following options:
view, press
, and select Take snapshot.
Edit video clip—Cut, add color effects, or use slow motion;
or mute or unmute, move, remove, or duplicate selected
video clips.
To save your video, select Options > Movie > Save. To
define the Memory in use, select Options > Settings. The
default is the device memory.
Edit text (shown only if you added text)—Move, remove, or
duplicate text; change the color and style of the text;
define how long it stays on the screen; and add effects to
the text.
In Settings, you can also define Default video name,
Default sc. shot name, Resolution, and Memory in use.
Download from Www.Somanuals.com. All Manuals Search And Download.
33
To send the video, select Send > Via multimedia,
Via e-mail, Via Bluetooth, or Via infrared. Contact your
service provider for details of the maximum multimedia
message size that you can send.
selected area, select Back. The selected areas form a
rectangle that represents the cropped image.
If you selected a predefined aspect ratio, select the upper
left corner of the area to be cropped. To resize the
highlighted area, use the scroll key. To freeze the selected
Tip! If you want to send a video clip that is over the
maximum multimedia message size allowed by your
service provider, you can send the clip using Bluetooth
wireless technology. See ‘Send data’, p. 85. You can also
transfer your videos to a compatible PC using Bluetooth
connectivity, or by using a compatible memory card
reader enhancement.
area, press
. To move the area within the picture, use
the scroll key. To select the area to be cropped, press
.
To reduce redness of the eyes in an image, select Options >
Apply effect > Red eye reduction. Move the cross onto
the eye, and press
. A loop appears on the display. To
resize the loop to fit the size of the eye, use the scroll key.
To reduce the redness, press
.
Edit images
Shortcuts in the image editor:
•
•
To view an image in the full screen, press
to the normal view, press again.
To rotate an image clockwise or counterclockwise,
press or
To zoom in or out, press
. To return
To edit the pictures after taking them, or images already
saved in Gallery, select Options > Edit.
Select Apply effect to crop and rotate the image; adjust
the brightness, color, contrast, and resolution; and add
effects, text, clip art, or a frame to the picture.
.
•
•
or
.
To move on a zoomed image, press
.
,
,
, or
To crop an image, select Options > Apply effect > Crop.
To crop the image size manually, select Manual or a
predefined aspect ratio from the list. If you select Manual,
a cross appears in the upper left corner of the image.
Move the scroll key to select the area to crop, and select
Set. Another cross appears in the lower right corner.
Again select the area to be cropped. To adjust the first
Slide show
Select Options > Slide show > Start to view images and
video clips in the full screen mode. The slide show starts
from the selected file. Select from the following:
Download from Www.Somanuals.com. All Manuals Search And Download.
34
Play—to open the RealPlayer application, and play a
selected video clip
TV screen displays what is displayed on the screen of your
device.
Pause—to pause the slide show
When you open an image in the thumbnail view while it is
viewed on the TV, the Zoom in option is not available.
When image is not zoomed, the opened image is displayed
on the TV in full screen.
Continue—to resume the slide show, if paused
End—to close the slide show
To browse the images, press
(previous) or
(next).
You can view videos and images as a slide show. All items
in an album or marked images are displayed on the TV in
full screen while the selected music plays.
To adjust the tempo of the slide show, before starting the
slide show, select Options> Slide show > Settings > Delay
between slides.
When you open a highlighted video clip, RealPlayer starts
playing the video clip on the device display and the TV
screen. See ‘RealPlayer’, p. 76.
To add sound to the slide show, select Options > Slide
show > Settingsand from the following:
All audio, including the stereo video clip sound, ringing
tone, and key tone, is routed to the TV when the video-out
cable is connected to the device. You can use the device
microphone normally.
Music—Select On or Off.
Track—Select a music file from the list.
To decrease or increase the volume during the slide show,
press
or
.
TV out settings must be configured for the applicable TV
system and TV aspect ratio. See ‘TV configuration’, p. 101.
TV out mode
Presentations
With presentations, you can view .svg (scalable vector
graphics) files, such as cartoons and maps. The images
maintain their appearance when printed or viewed with
different screen sizes and resolutions. To view .svg files,
You can watch videos and images stored in your device on
the screen of a compatible TV. Connect a compatible Nokia
TV out cable from the Pop-Port connectorTM on your device
to the video input of a compatible TV. For all applications
other than Images & video in Gallery and RealPlayer, the
Download from Www.Somanuals.com. All Manuals Search And Download.
35
select Presentations, scroll to an image, and select
To use Print online, you must have at least one printing
service configuration file installed. The files can be
obtained from printing service providers that support Print
online.
Options > Play.
To zoom in, press
. To zoom out, press
.
To switch between full screen and normal screen, press *.
For more information on the application, see the
Additional applications leaflet for your device at
www.nokia.com/support or your local Nokia website.
Albums
With albums you can conveniently manage your images
and video clips. To view the albums list, in Images &
video, select Options > Albums > View albums.
Online sharing
With Online sharing, you can share images and video clips
in online albums, weblogs, or in other online sharing
services on the web. You can upload content, save
unfinished posts as drafts and continue later, and view the
content of the albums. The supported content types may
vary depending on the service provider.
To add a picture or a video clip to an album in the gallery,
scroll to a picture or video clip, and select Options >
Albums > Add to album. A list of albums opens. Select
the album to which you want to add the picture or video
clip, and press
.
To remove a file from an album, press
deleted from Images & video in Gallery.
. The file is not
To use Online sharing, you must subscribe to the service
with an online image sharing service provider, and create
a new account. You can usually subscribe to the service on
the web page of the service provider. Contact your service
provider for details on subscribing to the service. For more
information on compatible service providers, see the
product support pages at www.nokia.com/support or your
local Nokia website.
Print online
With Print online, you can order prints of images online
directly to your home, or to a store where you can pick
them up. You can also order different products with the
selected image, such as mugs or mouse pads. The available
products depend on the service provider.
For more information on the application, see the
Additional applications leaflet for your device at
www.nokia.com/support or your local Nokia website.
Download from Www.Somanuals.com. All Manuals Search And Download.
36
Media applications
Play music
Music player
When you open the music player, the previously played
track or playlist is displayed. To view the music library,
Press
, and select Music player. With the music player,
select
or Options > Music library and the desired
you can play music files and create and listen to playlists.
song list. To start playing the songs in the view, select
Warning: Listen to music at a moderate level.
Continuous exposure to high volume may damage your
hearing. Do not hold the device near your ear when the
loudspeaker is in use, because the volume may be
extremely loud.
Options > Play.
When a song is playing, to change between play and
pause, press
or
.
To stop a song, press
. To fast forward or rewind, press
and hold
or
. To start playing the next or previous
or .
song, press
Add music
When you open the music player for the first time, the
player searches the device memory for music files to create
a music library.
To view the currently played song list, select
or
Options > Open 'Now playing'. To save the song list as a
playlist, select Options > Add to track list, and create a
new playlist, or select a saved playlist.
After you add or remove music files in the device, update
your music library. Select Options > Music library >
Options > Update Music library.
To adjust the volume, press
or
.
To modify the tone of music playback, select Options >
Equaliser.
Tip! You can transfer music files from your device to
a compatible memory card (if inserted) with Nokia
Music Manager available in Nokia PC Suite.
To select between random play and normal play mode,
select Options > Random play. To select whether playing
Download from Www.Somanuals.com. All Manuals Search And Download.
37
stops at the end of the playlist or restarts from its
beginning, select Options > Loop.
Transfer music
You can transfer music from a compatible PC or other
compatible devices using a compatible USB cable or
Bluetooth connectivity. For details, see ‘Bluetooth
connectivity’, p. 83.
To open your web bookmarks for downloading music,
select Options > Track downloads.
To return to the standby mode and leave the music
playing in the background, select Options > Play in
background.
To refresh the library after you have updated the song
selection in your device, in Music library, select Options >
Update Music library.
Music library
The requirements of the PC for music transfer:
To view the music library, select Options > Music library.
All tracks lists all music. To view sorted songs, select
Albums, Artists, Genres, or Composers. The album, artist,
genre, and composer information is collected from the ID3
or M4A tags of the song files, if available.
•
•
Microsoft Windows XP operating system (or later)
A compatible version of Windows Media Player
application. You can get more detailed information
about Windows Media Player compatibility from the
Nokia N93i section of the Nokia website.
Nokia PC Suite 6.7 or later
To add songs, albums, artists, genres, or composers to a
playlist, select the items and Options > Add to track list.
You can create a new playlist or add to an existing one.
•
Transfer music from PC
You can use three different methods to transfer music:
To view playlists, select Track lists. To create a new
playlist, select Options > New track list. When viewing a
playlist you have created yourself, to add more songs,
select Options > Add tracks.
•
To view your device on PC as an external hard drive
where you can transfer any data files, make the
connection with a compatible USB cable or Bluetooth
connectivity. If you are using the USB cable, select
Mass storage as the connection mode. A compatible
memory card needs to be inserted in the device.
To synchronize music with Windows Media Player,
connect the compatible USB cable and select Media
To delete a playlist, press
. Deleting a playlist only
deletes the playlist, not the music files.
•
Download from Www.Somanuals.com. All Manuals Search And Download.
38
player as the connection mode. A compatible memory
card needs to be inserted in the device.
To use Nokia Music Manager in Nokia PC Suite, connect
the compatible USB cable and select PC Suite as the
connection mode.
To transfer manual selections:
1 After your device is connected with Windows Media
Player, select your device in the navigation pane, if
more than one device is connected.
2 Drag the songs or albums to the list pane for
synchronization. To remove songs or albums, select an
item in the list, and click Remove from list.
3 Check that the list pane contains the files you want to
synchronize and that there is enough free memory on
the device. Click Start Sync. to start the
synchronization.
•
To change the default USB connection mode, press
select Connect. > Data cbl..
,
Both Windows Media Player and Nokia Music Manager in
Nokia PC Suite have been optimized for transferring music
files. For information about transferring music with Nokia
Music Manager, see the Nokia PC Suite user guide.
Automatic synchronization
Music transfer with Windows Media Player
To change the default file transfer option in Windows
Media Player, click the arrow under Sync, select your
device, and click Set up Sync. Clear or select the Sync this
device automatically check box.
The functionality of the music synchronization may vary
between different versions of the Windows Media Player
application. For more information, see the corresponding
Windows Media Player guides and helps.
If the Sync this device automatically check box is
selected and you connect your device, the music library in
your device is automatically updated based on playlists
you have selected in Windows Media Player.
Manual synchronization
After connecting your device with a compatible PC,
Windows Media Player selects manual synchronization if
there is not enough free memory in your device. With
manual synchronization, you can select the songs and
playlists that you want to move, copy, or remove.
If no playlists have been selected, the whole PC music
library is selected for synchronization. Note that your PC
library may contain more files that can fit to the device
memory and the compatible memory card of your device.
See the Windows Media Player help for more information.
The first time you connect your device you must enter a
name that is used as the name of your device in Windows
Media Player.
Download from Www.Somanuals.com. All Manuals Search And Download.
39
The playlists on your device are not synchronized with the
Windows Media Player playlists.
If the default printer is not available, a list of available
printing devices is displayed.
To change the default printer, select Options > Settings >
Default printer.
Image print
Use Image print to print your images using a compatible
data cable, wireless LAN (if available), Bluetooth
Print preview
The print preview view opens only when you start printing
an image in the gallery.
connectivity, or a compatible memory card (if available).
You can only print images that are in .jpeg format. The
pictures taken with the camera are automatically saved in
.jpeg format.
The selected images are displayed using predefined
layouts. To change the layout, press
and
through
the available layouts for the selected printer. If the images
To print images with Image print, select the image you
want to print and the print option in the gallery, camera,
image editor, or image viewer.
do not fit on a single page, press
additional pages.
or
to display the
To print to a printer compatible with Image print, connect
the data cable before you select the print option.
Print settings
The available options vary, depending on the capabilities of
the printing device that you select.
Printer selection
When you use Image print for the first time, a list of
available printers is displayed after you select the image.
Select a printer. The printer is set as the default printer.
To set a default printer, select Options > Settings >
Default printer.
To define how many images are printed on one page, select
Images per page.
If you have connected a printer compatible with Image
print using a Nokia Connectivity Cable CA-53, the printer
is automatically displayed.
Download from Www.Somanuals.com. All Manuals Search And Download.
40
Back up files
To transfer and back up media files from your device to a
compatible PC through the wireless LAN, select Options >
Transfer > Start. See ‘Wireless LAN’, p. 18.
Your device starts a device search. Select a device and a
folder to which you want to transfer the media files. Select
OK.
To change the settings for Storage device or Storage
folder, select Options > Settings.
Download from Www.Somanuals.com. All Manuals Search And Download.
41
Messaging
Press
, and select Messag.. In Messaging, you can
Drafts—Draft messages that have not been sent are
stored here.
create, send, receive, view, edit, and organize text
messages, multimedia messages, e-mail messages, and
special text messages containing data. You can also
receive messages and data using Bluetooth connectivity
or infrared, receive web service messages, cell broadcast
messages, and send service commands.
Sent—The last 20 messages that have been sent,
excluding messages sent using Bluetooth connectivity or
infrared, are stored here. To change the number of
messages to be saved, see ‘Other settings’, p. 54.
Outbox—Messages waiting to be sent are temporarily
stored here.
To create a new message, select New message.
Only devices that have compatible features can receive
and display multimedia messages. The appearance of a
message may vary depending on the receiving device.
Example: Messages are placed in the outbox, for
example, when your device is outside network
coverage. You can also schedule e-mail messages to be
sent the next time you connect to your remote mailbox.
Messaging contains the following folders:
Inbox—Received messages, except e-mail and cell
broadcast messages, are stored here. E-mail messages are
stored in the Mailbox.
Reports—You can request the network to send you a
delivery report of the text messages and multimedia
messages you have sent (network service). Receiving a
delivery report of a multimedia message that has been sent
to an e-mail address may not be possible.
My folders—Organize your messages into folders.
Tip! To avoid rewriting messages that you send often,
use texts in the templates folder.
Tip! When you have opened any of the default folders,
to switch between the folders, press
or
.
Mailbox—Connect to your remote mailbox to
retrieve your new e-mail messages or view your previously
retrieved e-mail messages offline. See ‘E-mail’, p. 52.
To enter and send service requests (also known as USSD
commands), such as activation commands for network
Download from Www.Somanuals.com. All Manuals Search And Download.
42
services, to your service provider, select Options > Service
•
•
If the next letter is located on the same key as the
present one, wait until the cursor appears (or press
to end the time-out period), and enter the letter.
command in the main view of Messaging.
Cell broadcast (network service) allows you to receive
messages on various topics, such as weather or traffic
conditions from your service provider. For available topics
and relevant topic numbers, contact your service provider.
In the main view of Messaging, select Options > Cell
broadcast. In the main view, you can see the status of a
topic, a topic number, name, and whether it has been
flagged ( ) for follow-up.
To insert a space, press
. To move the cursor to the
next line, press three times.
Predictive text input
You can enter any letter with a single keypress. Predictive
text input is based on a built-in dictionary to which you
can add new words.
is displayed when you write
text using predictive text input.
Cell broadcast messages cannot be received in UMTS
networks. A packet data connection may prevent cell
broadcast reception.
1 To activate predictive text input, press
, and select
Predictive text on. This activates predictive text input
for all editors in the device.
2 To write the desired word,
Write text
press the keys,
—
.
Press each key only once
for one letter. For
example, to write "Nokia"
when the English
ABC, abc, and Abc indicate the selected character mode.
123 indicates the number mode.
Traditional text input
is displayed when you are writing text using
traditional text input.
dictionary is selected,
press
for k,
for a.
The word suggestion changes after each keypress.
available for a number key than are printed on the key. 3 When you finish writing the word correctly, press
to confirm it, or press to add a space.
for N,
for o,
for i, and
•
Press a number key (
—
) repeatedly until the
desired character appears. There are more characters
Download from Www.Somanuals.com. All Manuals Search And Download.
43
If the word is not correct, press
the matching words the dictionary has found one by
repeatedly to view
To switch between the letter and number mode, press and
hold
.
one, or press
Matches.
, and select Predictive text >
To switch between the different character modes,
press
.
If the ? character is shown after the word, the word is
not in the dictionary. To add a word to the dictionary,
select Spell, enter the word using traditional text
input, and select OK. The word is added to the
dictionary. When the dictionary is full, a new word
replaces the oldest added word.
To delete a character, press
character, press and hold
. To delete more than one
.
To use most common punctuation marks, press
To open a list of special characters, press and hold
.
.
4 Start writing the next word.
Tip! To insert several special characters at the same
time, press when you select each character.
Write compound words
Write the first half of a compound word; to confirm it,
Write and send messages
The appearance of a multimedia message may vary,
depending on the receiving device.
press
. Write the last part of the compound word. To
complete the compound word, press
to add a space.
Turn predictive text input off
Before you can create a multimedia message or write an
e-mail, you must have the correct connection settings in
place. See ‘Receive MMS and e-mail settings’, p. 46 and
‘E-mail’, p. 52.
To turn predictive text input off for all editors in the
device, press , and select Predictive text > Off.
Tip! To turn predictive text input on or off, quickly
press
twice.
The wireless network may limit the size of MMS messages.
If the inserted picture exceeds this limit, the device may
make it smaller so that it can be sent by MMS.
Tips on text input
To insert a number in the letter mode, press and hold the
desired number key.
1 Select New message and one of the following:
Text msg.—to send a text message
Download from Www.Somanuals.com. All Manuals Search And Download.
44
Multimedia message—to send a multimedia message
(MMS)
To change the format in which recorded videos are
saved, see ‘Video settings’, p. 25.
E-mail—to send an e-mail
If you have not set up your e-mail account, you are
prompted to do so. To start creating the e-mail settings
with the mailbox guide, select Start.
2 In the To field, press
6 To take a new picture or record sound or video for a
multimedia message, select Insert new > Image,
Sound clip, or Video clip. To insert a new slide to the
message, select Slide.
To see what the multimedia message looks like, select
Options > Preview.
to select recipients or
groups from contacts, or
enter the recipient’s
phone number or e-mail
7 To add an attachment to an e-mail, select Options >
Insert > Image, Sound clip, Video clip, or Note.
E-mail attachments are indicated by
.
address. To add a
semicolon (;) that
separates the recipients,
Tip! To send other file types as attachments, open
the appropriate application, and select Send > Via
e-mail, if available.
press
. You can also
8 To send the message, select Options > Send, or
copy and paste the
number or address from
the clipboard.
press
.
Note: Your device may indicate that your message
was sent to the message center number programmed
into your device. Your device may not indicate whether
the message is received at the intended destination.
For more details about messaging services, contact
your service provider.
3 In the Subject field, enter
the subject of a multimedia message or e-mail. To
change the fields that are visible, select Options >
Address fields.
4 In the message field, write the message. To insert a
template, select Options > Insert or Insert object >
Template.
Your device supports the sending of text messages beyond
the character limit for a single message. Longer messages
are sent as a series of two or more messages. Your service
provider may charge accordingly. Characters that use
accents or other marks, and characters from some
5 To add a media object to a multimedia message, select
Options > Insert object > Image, Sound clip, or Video
clip. When sound is added,
is shown.
Download from Www.Somanuals.com. All Manuals Search And Download.
45
language options, take up more space, limiting the
number of characters that can be sent in a single message.
point you create as the preferred connection. See also
‘Multimedia messages’, p. 51.
E-mail messages are automatically placed in Outbox
before sending. If sending does not succeed, the e-mail is
left in the Outbox with the Failed status.
Before you can send, receive, retrieve, reply to, and forward
e-mail, you must do the following:
•
•
Configure an IAP correctly. See ‘Connection’, p. 107.
Mailbox in the Messag. main view and have not set up
your e-mail account, you are prompted to do so. To
start creating the e-mail settings with the mailbox
guide, select Start. See also ‘E-mail’, p. 52.
Tip! You can combine images, video, sound, and text
to a presentation and send it in a multimedia message.
Start to create a multimedia message, and select
Options > Create presentation. The option is shown
only if MMS creation mode is set to Guided or Free.
See ‘Multimedia messages’, p. 51.
You must have a separate e-mail account. Follow the
instructions given by your remote mailbox and internet
service provider (ISP).
Receive MMS and e-mail settings
You may receive the settings in a message from your
service provider. See ‘Data and settings’, p. 47.
Inbox—receive messages
For availability of and subscription to data services,
contact your service provider. Follow the instructions
given by your service provider.
In Inbox,
indicates an unread text message,
an
unread multimedia message,
data received through
Enter the MMS settings manually
infrared, and
connectivity.
data received through Bluetooth
1 Press
, and select Tools > Settings >
Connection > Access points, and define the settings
for a multimedia messaging access point. See
‘Connection’, p. 107.
When you receive a message,
are shown in the standby mode. To open the message,
select Show. To open a message in Inbox, press
and 1 new message
.
2 Press
, and select Messag. > Options > Settings >
To reply to a received message, select Options > Reply.
Multim. msg. > Access point in use and the access
Download from Www.Somanuals.com. All Manuals Search And Download.
46
To print a text or a multimedia message on a compatible
basic print profile (BPP) equipped printer with Bluetooth
connectivity (such as HP Deskjet 450 Mobile Printer or HP
Photosmart 8150), select Options > Print.
Data and settings
Your device can receive many kinds of messages that
contain data ( ):
Configuration message—You may receive settings from
your service provider, or company information
management department in a configuration message. To
save the settings, select Options > Save.
Multimedia messages
Important: Exercise caution when opening
messages. Multimedia message objects may contain
malicious software or otherwise be harmful to your device
or PC.
Business card—To save the information to Contacts,
select Options > Save business card. Certificates or
sound files attached to the business card are not saved.
You may receive a notification that a multimedia message
is waiting in the multimedia message center. To start a
packet data connection to retrieve the message to your
device, select Options > Retrieve.
Ringing tone—To save the ringing tone, select Options >
Save.
Operat. logo—To have the logo shown in the standby
mode instead of the network operator’s own
identification, select Options > Save.
When you open a multimedia message ( ), you may see
an image and a message.
is shown if sound is
included, or if video is included. To play the sound or
the video, select the indicator.
Calen. entry—To save the invitation, select Options >
Save to Calendar.
To see the media objects that have been included in the
multimedia message, select Options > Objects.
Web message—To save the bookmark to the bookmarks
list in web, select Options > Add to bookmarks. If the
message contains both access point settings and
If the message includes a multimedia presentation,
displayed. To play the presentation, select the indicator.
is
bookmarks, to save the data, select Options > Save all.
E-mail notif.—The note tells you how many new e-mails
you have in your remote mailbox. An extended
notification may list more detailed information.
Download from Www.Somanuals.com. All Manuals Search And Download.
47
To view previously retrieved e-mail messages offline, select
No. When you view e-mail messages offline, your device is
Web service messages
Web service messages ( ) are notifications (for
example, news headlines) and may contain a text message
or a link. For availability and subscription, contact your
service provider.
Retrieve e-mail messages
connection to the remote mailbox.
Mailbox
Important: Exercise caution when opening
messages. E-mail messages may contain malicious
software or otherwise be harmful to your device or PC.
If you select Mailbox and have not set up your e-mail
account, you are prompted to do so. To start creating the
e-mail settings with the mailbox guide, select Start. See
also ‘E-mail’, p. 52.
1 When you have an open connection to a remote
mailbox, select Options > Retrieve e-mail and one of
the following:
New—to retrieve all new e-mail messages
Selected—to retrieve only the e-mail messages that
have been marked
When you create a new mailbox, the name you give to the
mailbox replaces Mailbox in the Messaging main view.
You can have up to six mailboxes.
All—to retrieve all messages from the mailbox
To stop retrieving messages, select Cancel.
2 After you retrieve the e-mail messages, you can
continue viewing them online, or select Options >
Disconnect to close the connection and view the
e-mail messages offline.
Open the mailbox
When you open the mailbox, the device asks if you want
to connect to the mailbox (Connect to mailbox?).
To connect to your mailbox and retrieve new e-mail
headings or messages, select Yes. When you view
messages online, you are continuously connected to a
remote mailbox using a data connection. See also
‘Connection’, p. 107.
E-mail status indicators are as follows:
The new e-mail (offline or online mode) has not
been retrieved to your device.
The new e-mail has been retrieved to your device.
Download from Www.Somanuals.com. All Manuals Search And Download.
48
The e-mail message has been read, and it has not
been retrieved to your device.
The e-mail message has been read.
The e-mail heading has been read and the message
content has been deleted from the device.
Setting the device to retrieve e-mail automatically may
your service provider's network. Contact your service
provider for information about data transmission charges.
3 To open an e-mail message, press
. If the e-mail
Delete e-mail messages
message has not been retrieved and you are offline, you
are asked if you want to retrieve this message from the
mailbox.
To delete the contents of an e-mail message from the
Options > Delete. In Delete msg. from:, select Phone
only.
To view e-mail attachments, open a message that has the
attachment indicator , and select Options >
Attachments. If the attachment has a dimmed indicator,
it has not been retrieved to the device; select Options >
Retrieve.
The device mirrors the e-mail headings in the remote
mailbox. Although you delete the message content, the
e-mail heading stays in your device. If you want to remove
the heading as well, you must delete the e-mail message
from your remote mailbox; then make a connection from
your device to the remote mailbox again to update the
status.
You can also receive meeting requests in the mailbox. See
‘Meeting requests’, p. 72, and ‘Create calendar entries’,
p. 72.
To print an e-mail message on a compatible basic print
profile (BPP) equipped printer with Bluetooth connectivity
(such as HP Deskjet 450 Mobile Printer or HP Photosmart
8150), select Options > Print.
To delete an e-mail from the device and the remote
mailbox, select Options > Delete. In Delete msg. from:,
select Phone and server.
If you are offline, the e-mail is deleted first from your
device. During the next connection to the remote mailbox,
it is automatically deleted from the remote mailbox. If you
are using the POP3 protocol, messages marked to be
deleted are removed only after you have closed the
connection to the remote mailbox.
Retrieve e-mail messages automatically
To retrieve messages automatically, select Options >
E-mail settings > Automatic retrieval > Header
retrieval > Always enabled or Only in home net., and
define when and how often the messages are retrieved.
Download from Www.Somanuals.com. All Manuals Search And Download.
49
To cancel deleting an e-mail from the device and server,
scroll to an e-mail that has been marked to be deleted
during the next connection ( ), and select Options >
Restore.
Some or all message centers or access points may be preset
for your device by your service provider, and you may not
be able to change, create, edit, or remove them.
Text messages
Disconnect from the mailbox
When you are online, to end the data connection to the
remote mailbox, select Options > Disconnect.
Press
, and select Messag. > Options > Settings >
Text msg. and from the following:
Msg. centre in use—Select which message center is used
to deliver text messages.
View messages on a SIM card
Before you can view SIM messages, you must copy them
to a folder in your device.
Character encoding— To use character conversion to
another encoding system when available, select Reduced
support.
Receive report—Select whether the network sends
delivery reports on your messages (network service).
1 In the Messag. main view, select Options > SIM
messages.
2 Select Options > Mark/Unmark > Mark or Mark all
Message validity—Select how long the message center
resends your message if the first attempt fails (network
service). If the recipient cannot be reached within the
validity period, the message is deleted from the message
center.
to mark messages.
3 Select Options > Copy. A list of folders opens.
4 To start copying, select a folder and OK. To view the
messages, open the folder.
Message sent as—Change this option only if you are sure
that your message center is able to convert text messages
into these other formats. Contact your service provider.
Messaging settings
Fill in all fields marked with Must be defined or with a red
asterisk. Follow the instructions given by your service
provider. You may also obtain settings from your service
provider in a configuration message.
Preferred conn.—Select the connection used for sending
text messages: GSM network or packet data, if supported
by the network. See ‘Connection’, p. 107.
Download from Www.Somanuals.com. All Manuals Search And Download.
50
Reply via same ctr.—Select whether you want the reply
message to be sent using the same text message center
number (network service).
When you are outside your home network, sending and
receiving multimedia messages may cost you more.
If you select Multimedia retrieval > Always automatic,
your device automatically makes an active packet data
connection to retrieve the message both in and outside
your home network.
Multimedia messages
Press
, and select Messag. > Options > Settings >
Multimedia message and from the following:
Allow anon. msgs.—Select whether you want to reject
messages from an anonymous sender.
Image size—Define the size of the image in a multimedia
message: Original (shown only when the MMS creation
mode is set to Guided or Free), Small, or Large.
Receive adverts—Define whether you want to receive
multimedia message advertisements.
MMS creation mode —If you select Guided, the device
informs you if you try to send a message that may not be
supported by the recipient. Select Restricted; the device
prevents you from sending messages that may not be
supported.
Receive report—Select whether you want the status of
the sent message to be shown in the log (network service).
Receiving a delivery report of a multimedia message that
has been sent to an e-mail address may not be possible.
Deny report sending—Select whether you want to
prevent your device from sending delivery reports of
received multimedia messages.
Access point in use—Select which access point is used as
the preferred connection for the multimedia message
center.
Message validity—Select how long the message center
resends your message if the first attempt fails (network
service). If the recipient cannot be reached within the
validity period, the message is deleted from the message
center.
Multimedia retrieval—Select how you want to receive
multimedia messages. To receive multimedia messages
automatically in your home network, select Auto. in home
network. Outside your home network, you receive a
notification that there is a multimedia message that you
can retrieve in the multimedia message center.
Download from Www.Somanuals.com. All Manuals Search And Download.
51
Mailbox type—Defines the e-mail protocol that your
remote mailbox service provider recommends. The options
are POP3 and IMAP4. This setting can be selected only
once and cannot be changed if you have saved or exited
from the mailbox settings. If you use the POP3 protocol,
e-mail messages are not updated automatically when you
are online. To see the latest e-mail messages, you must
disconnect and make a new connection to your mailbox.
E-mail
Press
, and select Messag. > Options > Settings >
E-mail and from the following:
Mailboxes—Select a mailbox to change the following
settings: Connection settings, User settings, Retrieval
settings, and Automatic retrieval.
Mailbox in use— Select which mailbox you want to use
for sending e-mail.
Security (ports)—Select the security option used to secure
the connection to the remote mailbox.
To create a new mailbox, select Options > New mailbox
in the mailbox main view.
Port—Define a port for the connection.
APOP secure login (for POP3 only)—Use with the POP3
protocol to encrypt the sending of passwords to the
remote e-mail server while connecting to the mailbox.
Connection settings
To edit the settings for the e-mail you receive, select
Incoming e-mail and from the following:
To edit the settings for the e-mail you send, select
Outgoing e-mail and from the following:
User name—Enter your user name, given to you by your
service provider.
My e-mail address—Enter the e-mail address given to you
by your service provider. Replies to your messages are sent
to this address.
Password—Enter your password. If you leave this field
blank, you are prompted for the password when you try to
connect to your remote mailbox.
Outgoing mail serv.—Enter the IP address or host name of
the mail server that sends your e-mail. You may only be
able to use the outgoing server of your service provider.
Contact your service provider for more information.
Incoming mail serv.—Enter the IP address or host name of
the mail server that receives your e-mail.
Access point in use—Select an IAP. See ‘Connection’,
p. 107.
Access point in use—Select an IAP. See ‘Connection’,
p. 107.
Mailbox name—Enter a name for the mailbox.
Download from Www.Somanuals.com. All Manuals Search And Download.
52
The settings for User name, Password, Security (ports),
Retrieval settings
E-mail to retrieve—Define which parts of the e-mail are
retrieved: Headers only, Size limit (for POP3 only), or
Msgs. & attachs. (for POP3 only).
and Port are similar to the ones in Incoming e-mail.
User settings
My name—Enter your own name. Your name replaces your
e-mail address in the recipient’s device when the
recipient’s device supports this function.
Retrieval amount—Define how many new e-mail
messages are retrieved to the mailbox.
IMAP4 folder path (for IMAP4 only)—Define the folder
Send message—Define how e-mail is sent from your
device. Select Immediatelyfor the device to connect to the
mailbox when you select Send message. If you select
During next conn., e-mail is sent when the connection to
the remote mailbox is available.
path for folders to be subscribed.
Folder subscriptions (for IMAP4 only)—Subscribe to other
folders in the remote mailbox and retrieve content from
those folders.
Send copy to self—Select whether you want to save a
copy of the e-mail to your remote mailbox and to the
address defined in My e-mail address.
Automatic retrieval
Header retrieval—Select whether you want the device to
retrieve new e-mail automatically. You can define when,
and how often, the messages are retrieved.
Include signature—Select whether you want to attach a
signature to your e-mail messages.
Setting the device to retrieve e-mail automatically may
involve the transmission of large amounts of data through
your service provider's network. Contact your service
provider for information about data transmission charges.
New e-mail alerts—Select whether you want to receive
the new e-mail indications, a tone and a note, when new
mail is received to the mailbox.
Default encoding—Select another encoding according to
language.
Web service messages
Press
, and select Messag. > Options > Settings >
Service message. Select whether you want to receive
service messages. If you want to set the device to
Download from Www.Somanuals.com. All Manuals Search And Download.
53
automatically activate the browser and start a network
connection to retrieve content when you receive a service
message, select Download messages > Automatically.
messages. When the limit is reached, the oldest message is
deleted.
Memory in use—If a compatible memory card is inserted
in the device, select Phone memory or Memory card to
save your messages.
Cell broadcast
Check the available topics and related topic numbers with
your service provider. Press
Options > Settings > Cell broadcast and from the
following:
, and select Messag. >
Reception—Select whether you want to receive cell
broadcast messages.
Language—Select the languages in which you want to
receive messages: All, Selected, or Other.
Topic detection—Select whether the device
automatically searches for new topic numbers, and saves
the new numbers without a name to the topic list.
Other settings
Press
, and select Messag. > Options > Settings >
Other and from the following:
Save sent messages—Select whether you want to save a
copy of the text messages, multimedia messages, or
e-mail that you send to the sent folder.
No. of saved msgs.—Define how many sent messages are
saved to the sent folder at a time. The default limit is 20
Download from Www.Somanuals.com. All Manuals Search And Download.
54
Contacts (phonebook)
Press , and select Contacts. In Contacts you can add a
personal ringing tone or a thumbnail image to a contact
card. You can also create contact groups, which allow you
to send text messages or e-mail to many recipients at the
same time. You can add received contact information
(business cards) to contacts. See ‘Data and settings’, p. 47.
Contact information can only be sent to or received from
compatible devices.
Tip! To add and edit contact cards, use Nokia
Contacts Editor available in Nokia PC Suite.
To attach a small thumbnail image to a contact card, open
the contact card, and select Options > Edit > Options >
Add thumbnail. The thumbnail image is shown on the
main display when the contact calls.
Tip! Speed dialing is a quick way to call frequently
used numbers. You can assign speed dialing keys to
eight phone numbers. See ‘Speed dial a phone number’,
p. 59.
Save names and numbers
1 Select Options > New contact.
Tip! To send contact information, select the card you
want to send. Select Options > Send > Via text
message, Via multimedia, Via e-mail (if a mailbox is
defined), Via Bluetooth, or Via infrared. See
‘Messaging’, p. 42 and ‘Send data’, p. 85.
2 Fill in the fields that you want, and select Done.
To edit contact cards in Contacts, scroll to the contact
card you want to edit, and select Options > Edit.
Tip! To print contact cards on a compatible basic print
profile (BPP) equipped printer with Bluetooth
connectivity (such as HP Deskjet 450 Mobile Printer or
HP Photosmart 8150), select Options > Print.
To add a contact to a group, select Options > Add to
group: (shown only if you have created a group). See
‘Create contact groups’, p. 57.
To view the amount of contacts, groups, and the available
memory in Contacts, select Options > Contacts info.
To delete a contact card in Contacts, select a card, and
press . To delete several contact cards at the same time,
press
and
to mark the contacts, and press to
delete.
Download from Www.Somanuals.com. All Manuals Search And Download.
55
Tip! You can synchronize your contacts to a
compatible PC with Nokia PC Suite.
Default numbers and addresses
You can assign default numbers or addresses to a contact
card. In this way if a contact has several numbers or
addresses, you can easily call or send a message to the
contact to a certain number or address. The default
number is also used in voice dialing.
SIM directory and services
For availability and information on using SIM card services,
contact your SIM card vendor. This may be the service
provider or other vendor.
1 In the address book, select a contact, and press
.
2 Select Options > Defaults.
Press
, and select Contacts > Options > SIM
3 Select a default to which you want to add a number or
contacts > SIM directory to see the names and numbers
stored on the SIM card. In the SIM directory you can add,
edit, or copy numbers to contacts, and you can make calls.
an address, and select Assign.
4 Select a number or an address you want to set as a
default.
To view the list of fixed dialing numbers, select Options >
SIM contacts > Fixed dialling contacts. This setting is
only shown if supported by your SIM card.
The default number or address is underlined in the contact
card.
To restrict calls from your device to selected phone
numbers, select Options > Activ. fixed dialling. To add
new numbers to the fixed dialing list, select Options >
New SIM contact. You need the PIN2 code for these
functions.
Copy contacts
To copy names and numbers from a SIM card to your
device, press
, and select Contacts > Options > SIM
contacts > SIM directory. Select the names you want to
When you use Fixed dialling, packet data connections are
not possible, except when sending text messages over a
packet data connection. In this case, the message center
number and the recipient’s phone number must be
included on the fixed dialing list.
copy and Options > Copy to Contacts.
To copy contacts to your SIM card, press
, and select
Contacts. Select the names you want to copy and
Options > Copy to SIM direct., or Options > Copy > To
SIM directory. Only the contact card fields supported by
your SIM card are copied.
Download from Www.Somanuals.com. All Manuals Search And Download.
56
When fixed dialing is activated, calls may be possible to
the official emergency number programmed into your
device.
5 Scroll to a contact, and press
to mark it. To add
multiple members at a time, repeat this action on all
the contacts you want to add.
6 Select OK to add the contacts to the group.
To rename a group, select Options > Rename, enter the
Add ringing tones for contacts
When a contact or group member calls you, the device
plays the chosen ringing tone (if the caller’s telephone
number is sent with the call and your device recognizes it).
new name, and select OK.
Remove members from a group
1 In the groups list, open the group you want to modify.
2 Scroll to the contact, and select Options > Remove
from group.
1 Press
to open a contact card or go to the groups list,
and select a contact group.
2 Select Options > Ringing tone. A list of ringing tones
opens.
3 Select Yes to remove the contact from the group.
3 Select the ringing tone you want to use for the
Tip! To check to which groups a contact belongs,
scroll to the contact, and select Options > Belongs to
groups.
individual contact or the selected group.
To remove the ringing tone, select Default tone from the
list of ringing tones.
Create contact groups
1 In Contacts, press
to open the groups list.
2 Select Options > New group.
3 Write a name for the group or use the default name,
and select OK.
4 Open the group, and select Options > Add members.
Download from Www.Somanuals.com. All Manuals Search And Download.
57
Make calls
You must copy the contacts from your SIM card to
Contacts before you can make a call this way. See ‘Copy
contacts’, p. 56.
Voice calls
Tip! To increase or decrease the volume during a call,
press
or
.
To call your voice mailbox (network service), press and hold
in the standby mode. See also ‘Call divert’, p. 114.
You can make voice calls in the fold-open mode and view
mode. See ‘Modes’, p. 11.
Tip! To change the phone number of your voice
mailbox, press , and select Tools > Voice mail >
Options > Change number. Enter the number
(obtained from your service provider), and select OK.
1 To start a voice call, with the fold open, enter the
phone number in the standby mode, including the area
code. To remove a number, press
For international calls, press
character (replaces the international access code), and
enter the country code, area code (omit the leading
zero if necessary), and phone number.
.
twice for the +
To call a recently dialed number in the standby mode,
press
. Scroll to the number you want, and press
to call the number.
2 Press
to call the number.
or close the cover to end the call (or to
Make a conference call
1 Make a call to the first participant.
3 Press
cancel the call attempt).
2 To make a call to another participant, select Options >
New call. The first call is automatically put on hold.
3 When the new call is answered, to join the first
participant in the conference call, select Options >
Conference.
Pressing
application is active.
always ends a call, even if another
To make a call from Contacts, press , and select
Contacts. Scroll to the desired name, or enter the first
letters of the name to the search field. Matching contacts
are listed. To call, press
call.
To add a new person to the call, repeat step 2, and
select Options > Conference > Add to conference.
. Select the call type Voice
Download from Www.Somanuals.com. All Manuals Search And Download.
58
Your device supports conference calls between a
maximum of six participants, including yourself.
To have a private conversation with one of the
participants, select Options > Conference > Private.
Select a participant, and select Private. The conference
call is put on hold on your device. The other
participants can still continue the conference call.
When you finish the private conversation, select
Options > Add to conference to return to the
conference call.
Voice dialing
Your device supports enhanced voice commands.
Enhanced voice commands are not dependent on the
speaker’s voice; you do not record voice tags in advance.
Instead, the device creates a voice tag for the entries in
contacts, and compares the spoken voice tag to it. The
voice recognition in the device adapts to the main user’s
voice to recognize the voice commands better.
The voice tag for a contact is the name or nickname that
is saved on the contact card. To listen to the synthesized
voice tag, open a contact card, and select Options > Play
voice tag.
To drop a participant, select Options > Conference >
Drop participant, scroll to the participant, and select
Drop.
4 To end the active conference call, press
.
Make a call with a voice tag
Note: Using voice tags may be difficult in a noisy
environment or during an emergency, so you should
not rely solely upon voice dialing in all circumstances.
Speed dial a phone number
To activate speed dialing, press , and select Tools >
Settings > Call > Speed dialling > On.
When you use voice dialing, the loudspeaker is in use. Hold
the device at a short distance away when you say the
voice tag.
To assign a phone number to one of the speed dialing keys
(
—
), press , and select Tools > Spd. dial. Scroll to
the key to which you want to assign the phone number,
1 To start voice dialing, in the standby mode, press and
hold the right selection key. If you are using a
compatible headset with the headset key, press and
hold the headset key to start voice dialing.
and select Options > Assign.
mailbox.
is reserved for the voice
To call in the standby mode, press the speed dial key and
.
Download from Www.Somanuals.com. All Manuals Search And Download.
59
2 A short tone is played, and Speak now is displayed. Say
clearly the name or nickname that is saved on the
contact card.
3 The device plays a synthesized voice tag for the
recognized contact in the selected device language,
and displays the name and number. After a timeout of
2.5 seconds, the device dials the number.
If the recognized contact was not correct, select Next
to view a list of other matches, or Quit to cancel voice
dialing.
and be in the coverage of a UMTS network. For availability
of and subscription to video call services, contact your
two parties. The video call can be made to a compatible
mobile phone or an ISDN client. Video calls cannot be
made while there is another voice, video, or data call
active.
Icons:
You are not receiving video (the recipient is not
sending video or the network is not transmitting it).
You have denied video sending from your device. To
send a still image instead, see ‘Call’, p. 106.
If several numbers are saved under the name, the device
selects the default number, if it has been set. Otherwise
the device selects the first available number of the
following: Mobile, Mobile (home), Mobile (business),
Telephone, Tel. (home), and Tel. (business).
1 To start a video call, with the fold open, enter the phone
number in the standby mode, or select Contacts and a
contact.
2 Select Options > Video call.
Video calls
You can make video calls in the fold-open mode and view
mode. See ‘Modes’, p. 11.
If you want to make a hands-free video call, activate the
view mode after the call recipient has answered the call.
Starting a video call may take a while. Waiting for video
image is shown. If the call is not successful (for example,
video calls are not supported by the network, or the
receiving device is not compatible) you are asked if you
want to try a normal call or send a message instead.
For hands-free video calls, use the view mode.
When you make a video call, you can see a real-time,
two-way video between you and the recipient of the call.
The live video image, or video image captured by the
camera in your device is shown to the video call recipient.
The video call is active when you see two video images, and
hear the sound through the loudspeaker. The call recipient
Download from Www.Somanuals.com. All Manuals Search And Download.
60
may deny video sending (
sound and may see a still image or a grey background
graphic.
), in which case you hear the
Video sharing requirements
Because Video sharing requires a 3G (UMTS) connection,
your ability to use Video sharing depends on 3G network
availability. Contact your service provider for questions
about network availability and fees associated with using
this application. To use Video sharing you must do the
following:
Tip! To increase or decrease the volume during a call,
press
or
.
To change between showing video or hearing only sound,
select Enable or Disable > Sending video, Sending audio,
or Sending audio & video.
•
•
•
Ensure that Video sharing is installed on your Nokia
device.
Ensure that your device is set up for person-to-person
connections. See ‘Settings’, p.62.
Ensure you have an active UMTS connection and are
within UMTS network coverage. See ‘Settings’, p. 62. If
you start the sharing session while you are within
UMTS network coverage and a handover to GSM
occurs, the sharing session is discontinued, but your
voice call continues.
To zoom your own image, select Zoom in or Zoom out. The
zoom indicator is shown on the top of the display.
To switch the places of the sent and received video images
on the display, select Change image order.
Even if you have denied video sending during a video call,
the call will still be charged as a video call. Check the
pricing with your service provider.
To end the video call, press
.
•
Ensure that both the sender and recipient are
registered to the UMTS network. If you invite someone
to a sharing session and that person’s phone is turned
off, or the person is not within UMTS network
coverage, they do not know that you are sending an
invitation. However, you receive an error message that
the recipient cannot accept the invitation.
Video sharing
Use Video sharing to send live video or a video clip from
your mobile device to another compatible mobile device
during a voice call. Simply invite a recipient to view the live
video, or a video clip you want to share. Sharing begins
automatically when the recipient accepts the invitation,
and you activate the correct mode. See ‘Share video’, p. 62.
Download from Www.Somanuals.com. All Manuals Search And Download.
61
•
Ensure that your device UMTS access point connection
settings are configured properly. For help, see
‘Connection’, p. 107.
Settings
Person-to-person connection settings
A person-to-person connection is also known as a session
initiation protocol (SIP) connection. The SIP profile
settings must be configured in your device before you can
use Video sharing. Setting up a SIP profile allows you to
establish a live person-to-person connection to another
compatible phone. The SIP profile must also be established
to receive a sharing session.
Share video
To receive a sharing session, the recipient must install
Video sharing and configure the required settings on their
mobile device. You and the recipient must both be
registered to the service before you can start sharing.
To receive share invitations, you must be registered to the
service, have an active UMTS connection, and be within
the UMTS network coverage.
Ask your service provider for the SIP profile settings, and
save them in your device. Your service provider may send
you the settings over the air.
Live video
If you know a recipient’s SIP address, you can enter it on
your contact card for that person. Open Contacts from
your device main menu, and open the contact card (or
start a new card for that person). Select Options > Add
detail > SIP. Enter the SIP address in the format
sip:username@domainname (you can use an IP address
instead of a domain name).
1 When a voice call is active, select Options > Share
video > Live.
2 The device sends the invitation to the SIP address you
have added to the contact card of the recipient.
If the recipient has several SIP addresses in the contact
card, select the SIP address to which you want to send
the invitation, and Select to send the invitation.
If the SIP address of the recipient is not available, enter
a SIP address. Select OK to send the invitation.
3 Sharing begins automatically when the recipient
accepts the invitation.
UMTS connection settings
To set up your UMTS connection, do the following:
•
Contact your service provider to establish an
agreement for you to use the UMTS network.
Download from Www.Somanuals.com. All Manuals Search And Download.
62
The loudspeaker is active. You can also use a
compatible headset to continue your voice call while
you share live video.
5 Select Pause to pause the sharing session. Select
Options > Continue to resume sharing.
6 To end the sharing session, select Stop. To end the
4 Select Pause to pause the sharing session. Select
voice call, press
.
Continue to resume sharing.
5 To end the sharing session, select Stop. To end the voice
Accept an invitation
call, press
.
When someone sends you a share invitation, an invitation
message is displayed showing the sender’s name or SIP
address. If your device is not set to Silent, it rings when
you receive an invitation.
Video clip
1 When a voice call is active, select Options > Share
video > Clip.
A list of video clips opens.
If someone sends you a share invitation and you are not
within UMTS network coverage, you will not know that
you received an invitation.
2 Select a video clip you want to share. A preview view
opens. To preview the clip, select Options > Play.
3 Select Options > Invite.
When you receive an invitation, you can select:
You may need to convert the video clip into a suitable
format to be able to share it. Clip must be converted
for sharing. Continue? appears. Select OK.
The device sends the invitation to the SIP address you
have added to the contact card of the recipient.
If the recipient has several SIP addresses in the contact
card, select the SIP address to which you want to send
the invitation, and Select to send the invitation.
If the SIP address of the recipient is not available, enter
a SIP address. Select OK to send the invitation.
4 Sharing begins automatically when the recipient
accepts the invitation.
Accept—to begin the sharing session. If the sender wants
to share live video, activate the view mode.
Reject—to decline the invitation. The sender receives a
message that you rejected the invitation. You can also
press
to decline the sharing session and disconnect
the voice call.
To end the sharing session, select Stop. If you share a
video clip, select Exit. Video sharing ended is displayed.
Download from Www.Somanuals.com. All Manuals Search And Download.
63
Answer or reject a call
To answer the call in the fold-open mode, press
When a video call arrives,
is displayed.
. If
Answer if fold opened is set to Yes, to answer a call in
Tip! You can assign a ringing tone for video calls.
the fold-closed mode, open the fold, and the call starts
Press
and select Tools > Profiles, a profile, and
automatically. Otherwise, open the fold, and press
.
Options > Personalise > Video call tone.
To mute the ringing tone when a call comes in, select
Silence. To mute the ringing tone in the fold-closed mode,
press the side scroll key.
In the fold-open mode, press
to answer the video call.
video image, recorded video clip, or the image being
captured by the camera in your device is shown to the
caller. If you want to send a live video image, turn the
camera unit to the direction from which you want to send
the video image. If you do not activate the view mode,
video sending is not possible, but you can still hear the
other person. A grey screen is shown in place of the video.
To replace the grey screen with a still image, see ‘Call’,
Image in video call, p. 106.
Tip! If a compatible headset is connected to the
device, to answer and end a call, press the headset key.
If you do not want to answer a call, in the fold-open
mode, press
to reject it. The caller hears a line busy
tone. If you have activated the Call divert > If busy
function to divert calls, rejecting an incoming call also
diverts the call. See ‘Call divert’, p. 114.
When you reject an incoming call with the fold open, you
can also send a text message to the caller informing why
you cannot answer the call. Select Options > Send msg..
You can edit the text before sending it. To set up this
option and write a standard text message, see ‘Call’, p.
106.
Even if you have denied video sending during a video call,
the call is still charged as a video call. Check the pricing
with your service provider.
To end the video call, in the view mode or with the fold
open, press
.
If you answer a voice call during a video call, the video call
is dropped. Call waiting is not available during a video
call.
Download from Www.Somanuals.com. All Manuals Search And Download.
64
Send DTMF—To send DTMF tone strings, for example, a
password. Enter the DTMF string or search for it in
Contacts. To enter a wait character (w) or a pause
Call waiting
You can answer a call while you have another call in
progress if you have activated Call waiting (network
service) in Tools > Settings > Call > Call waiting.
character (p), press
repeatedly. Select OK to send the
tone.
To answer the waiting call, press
on hold.
. The first call is put
Tip! You can add DTMF tones to the Phone number
or DTMF fields in a contact card.
To switch between the two calls, select Swap. Select
Options > Transfer to connect an incoming call or a call
on hold with an active call and to disconnect yourself from
Options during a video call
Select Options during a video call for the following
options: Enable or Disable (audio in the fold-open mode;
video, audio, or both in the view mode); Activate handset
(if a headset with Bluetooth connectivity is attached); or
Activate handsfree (fold-open mode only, and if a
compatible headset with Bluetooth connectivity is
attached); End active call; Change image order; Zoom in
or Zoom out (view mode only).
the calls. To end the active call, press
. To end both
calls, select Options > End all calls.
Options during a voice call
Many of the options that you can use during a voice call
are network services. Select Options during a call for the
available options displayed on your device, including the
following:
Replace—To end an active call and replace it by answering
the waiting call.
Log
Send MMS (in UMTS networks only)—To send an image or
a video in a multimedia message to the other participant
of the call. You can edit the message and change the
Recent calls
To monitor the phone numbers of missed, received, and
dialed calls, press , and select Applications > Log >
Recent calls. The device registers missed and received
recipient before sending. Press
compatible device.
to send the file to a
Download from Www.Somanuals.com. All Manuals Search And Download.
65
calls only if the network supports these functions, the
device is switched on, and within the network service
area.
To clear call duration timers, select Options > Clear
timers. For this you need the lock code; see ‘Security’,
‘Phone and SIM’, p. 111.
Tip! When you see a note in the standby mode about
missed calls, select Show to access the list of missed
calls. To call back, scroll to a name or number, and
Packet data
To check the amount of data sent and received during
packet data connections, press , and select
Applications > Log > Packet data. For example, you may
be charged for your packet data connections by the
amount of data sent and received.
press
.
To clear all recent call lists, select Options > Clear recent
calls in the recent calls main view. To clear one of the call
registers, open the register you want to erase, and select
Options > Clear list. To clear an individual event, open a
register, scroll to the event, and press
.
Monitor all communication events
Icons in Log:
Call duration
Incoming
Outgoing
Missed communication events
To monitor the approximate duration of your incoming
and outgoing calls, press , and select Applications >
Log > Call duration.
To set the display of the call duration while a call is active,
select Applications > Log > Options > Settings > Show
call duration > Yes or No.
Note: The actual time invoiced for calls by your
service provider may vary, depending on network
features, rounding off for billing, and so forth.
Download from Www.Somanuals.com. All Manuals Search And Download.
66
To monitor all voice and video
calls, text messages, or data
connections registered by the
To erase the contents of the log, recent calls register, and
messaging delivery reports permanently, select Options >
Clear log. Select Yes to confirm. To remove a single event
device, press
select Applications > Log, and
press to open the general
,
from the log, press
.
To set the Log duration, select Options > Settings > Log
duration. The log events remain in the device memory for
a set number of days after which they are automatically
erased to free memory. If you select No log, all the log
contents, recent calls register, and messaging delivery
reports are permanently deleted.
log. For each communication
event, you can see the sender
or recipient name, phone
number, name of the service
provider, or access point. You
can filter the general log to
To view the details of a communication event, in the
general log view, scroll to an event, and press
.
view just one type of event and create new contact cards
based on the log information.
Tip! In the details view, to copy a phone number to
the clipboard, select Options > Copy Number.
Tip! To see the duration of a voice call on the main
display during an active call, select Options > Settings
> Show call duration > Yes.
Packet data counter and connection timer: To view how
much data, measured in kilobytes, is transferred and how
long a certain packet data connection lasts, scroll to an
incoming or outgoing event indicated by Pack., and select
Options > View details.
Tip! To view a list of sent messages, press , and
select Messag. > Sent.
Subevents, such as a text message sent in more than one
part and packet data connections, are logged as one
communication event. Connections to your mailbox,
multimedia messaging center, or web pages are shown as
packet data connections.
To filter the log, select Options > Filter and a filter.
Download from Www.Somanuals.com. All Manuals Search And Download.
67
Services
Various service providers maintain pages specifically
designed for mobile devices. These pages use the wireless
markup language (WML), extensible hypertext markup
language (XHTML), or hypertext markup language (HTML).
Enter settings manually
1 Press , select Tools > Settings > Connection >
Access points, and define the settings for an access
point. Follow the instructions given to you by your
service provider. See ‘Connection’, p. 107.
Check the availability of services, pricing, and fees with
your service provider. Service providers will also give you
instructions on how to use their services.
2 Press
, and select Services > Options > Bookmark
manager > Add bookmark. Write a name for the
bookmark and the address of the page defined for the
current access point.
Press
, and select Services.
3 To set the created access point as the default access
Shortcut: To start a connection, press and hold
in the standby mode.
point, select Options > Settings > Access point.
Bookmarks view
Web access point
The bookmarks view opens when you open Services.
To access pages, you need web service settings for the
page that you want to use. You may receive the settings
in a special text message from the service provider that
offers the web page. See ‘Data and settings’, p. 47. For
more information, contact your service provider.
Your device may have some bookmarks or links preinstalled
for or may allow access to sites provided by third parties
not affiliated with Nokia. Nokia does not endorse or
assume any liability for these sites. If you choose to access
them, you should take the same precautions, for security or
content, as you would with any internet site.
Tip! Settings may be available on the website of a
service provider.
indicates the starting page defined for the default
access point.
Download from Www.Somanuals.com. All Manuals Search And Download.
68
On a browser page, new links appear underlined in blue
and previously visited links in purple. Images that act as
links have a blue border around them.
Connection security
If the security indicator
is displayed during a
connection, the data transmission between the device and
the internet gateway or server is encrypted.
To open links and make selections, press
.
Shortcut: Press
to jump to the end of a page and
to the beginning of a page.
The security icon does not indicate that the data
transmission between the gateway and the content server
(or place where the requested resource is stored) is secure.
The service provider secures the data transmission
between the gateway and the content server.
Back is not available, select Options > Navigation
options > History to view a chronological list of the pages
you visited during a browsing session.
Select Options > Details > Security to view details about
the connection, encryption status, and information about
server and user authentication.
To retrieve the latest content from the server, select
Options > Navigation options > Reload.
To save a bookmark, select Options > Save as bookmark.
Security certificates may be required for some services,
such as banking services. For more information, contact
your service provider. See also ‘Certificate management’,
p. 112.
Tip! To access the bookmarks view while browsing,
press and hold
. To return to the browser view,
select Options > Back to page.
To save a page while browsing, select Options >
Advanced options > Save page. You can save pages to
the device memory or a compatible memory card (if
inserted), and browse them when offline. To access the
Browse
Important: Use only services that you trust and that
offer adequate security and protection against harmful
software.
pages later, press
in the bookmarks view to open the
Saved pages view.
To download a page, select a bookmark, or enter the
address in the field ( ).
To enter a new URL address, select Options > Navigation
options > Go to web address.
Download from Www.Somanuals.com. All Manuals Search And Download.
69
To open a sublist of commands or actions for the currently
open page, select Options > Service options.
Important: Only install and use applications and
other software from sources, such as applications that are
Symbian Signed or have passed the Java VerifiedTM testing
You can download files that cannot be shown on the
browser page, such as ringing tones, images, operator
logos, themes, and video clips. To download an item, scroll
1 To download the item, scroll to the link, and press
.
2 Select the appropriate option to purchase the item, for
to the link, and press
.
example, “Buy”.
3 Carefully read all the information provided.
To continue the download, select Accept. To cancel the
download, select Cancel.
When you start a download, a list of ongoing, paused, and
completed downloads from the current browsing session
is displayed. To view the list, select Options > Tools >
Downloads. In the list, scroll to an item, and select
Options to pause, resume, or cancel ongoing downloads,
or open, save, or delete completed downloads.
End a connection
To end the connection and view the browser page offline,
select Options > Advanced options > Disconnect, or to
end the connection and close the browser, select
Options > Exit.
Important: Only install and use applications and
other software from sources, such as applications that are
Symbian Signed or have passed the Java VerifiedTM testing.
Empty the cache
The information or services you have accessed are stored in
the cache memory of the device.
Download and purchase items
You can download items such as ringing tones, images,
operator logos, themes, and video clips. These items can
be provided free, or you can purchase them. Downloaded
items are handled by the respective applications in your
device, for example, a downloaded photo can be saved in
Gallery.
A cache is a memory location that is used to store data
temporarily. If you have tried to access or have accessed
confidential information requiring passwords, empty the
cache after each use. The information or services you have
accessed are stored in the cache. To empty the cache,
select Options > Advanced options > Clear cache.
Download from Www.Somanuals.com. All Manuals Search And Download.
70
Volume—If you want the browser to play sounds
Web settings
embedded on web pages, select a volume level.
Select Options > Settings and from the following:
Rendering—If you want the page layout shown as
accurately as possible when in the Small screen mode,
select By quality. If you do not want external cascading
style sheets to be downloaded, select By speed.
‘Connection’, p. 107. Some or all access points may be
preset for your device by your service provider, and you
may not be able to change, create, edit, or remove them.
Cookies—Enable or disable the receiving and sending of
cookies.
Homepage—Define the home page.
Load imgs. & sounds—Select whether you want to load
images while browsing. If you select No, to load images
later during browsing, select Options > Show images.
Java/ECMA script—Enable or disable the use of scripts.
Security warnings—Hide or show security notifications.
Conf. DTMF sending—Select whether you want to
confirm before the device sends DTMF tones during a
voice call. See also ‘Options during a voice call’, p. 65.
Font size—Select the text size.
Default encoding—If text characters are not shown
correctly, you can select another encoding according to
language.
Auto. bookmarks—Enable or disable automatic bookmark
collecting. If you want to continue collecting automatic
bookmarks but hide the folder from the bookmarks view,
select Hide folder.
Screen size—Select what is shown when you are browsing:
Select. keys only or Full screen.
Search page—Define a web page that is downloaded when
you select Navigation options > Open search page in the
bookmarks view, or when browsing.
Download from Www.Somanuals.com. All Manuals Search And Download.
71
Calendar
Use Calendar to remind you of meetings, anniversaries,
and to keep track of your tasks and other notes.
Anniversary—to remind you of birthdays or special
dates (entries are repeated every year)
To-do—to remind you of a task that needs doing by a
specific date
Create calendar entries
2 Fill in the fields. To set an alarm, select Alarm > On,
and enter the Alarm time and Alarm date.
To add a description for an appointment or a meeting,
select Options > Add description.
Shortcut: In the day, week, or month calendar view,
press any key (
—
). An appointment entry opens,
and the characters you enter are added to the Subject
field. In the to-do view, a to-do note entry opens.
3 To save the entry, select Done.
When the calendar alarms for a note, select Silence to turn
off the calendar alarm tone. The reminder text stays on the
screen. To end the calendar alarm, select Stop. To set the
alarm to snooze, select Snooze.
1 Press
, and select
Calendar > Options >
New entry and one of
the following:
Meeting—to remind you
of an appointment that
has a specific date and
time
Tip! You can synchronize your calendar with a
compatible PC using Nokia PC Suite. When creating a
calendar entry, set the desired Synchronisation option.
Meeting request—to
send a meeting request
by e-mail (a mailbox
must be defined in the
device)
Meeting requests
If you receive a meeting request to the mailbox in your
device, the request is saved to the calendar when you open
the e-mail.
Memo—to write a general entry for a day
Download from Www.Somanuals.com. All Manuals Search And Download.
72
You can view received meeting requests in the mailbox or
in the calendar. To respond to a meeting request using
e-mail, select Options > Respond.
Manage your calendar entries
Deleting past entries in Calendar saves space in your
device memory.
To delete more than one event at a time, go to the month
view, and select Options > Delete entry > Before date or
All entries.
Calendar views
Tip! Select Options > Settings to change the starting
day of the week or the view that is shown when you
open the calendar.
To mark a task as completed, scroll to it in the to-do view,
and select Options > Mark as done.
In the month view, dates that have calendar entries are
marked with a small triangle in the bottom right corner. In
the week view, memos and anniversaries are placed before
8 a.m. To switch between the month view, week view, day
Calendar settings
To modify Calendar alarm tone, Default view, Week
starts on, and Week view title, select Options >
Settings.
view, and to-do view, press
To go to a certain date, select Options > Go to date. To
jump to today, press
.
.
To send a calendar note to a compatible device, select
Options > Send.
To print calendar entries on a compatible basic print profile
(BPP) equipped printer with Bluetooth connectivity (such
as HP Deskjet 450 Mobile Printer or HP Photosmart 8150),
select Options > Print.
Download from Www.Somanuals.com. All Manuals Search And Download.
73
Applications
If you do not have access to the Visual Radio service, the
Visual Radio.
Visual Radio
You can use the Visual Radio application (network service)
as a traditional FM radio with automatic tuning and saved
stations. If you tune to stations that offer Visual Radio
service, you can view visual information on the display
related to the radio program. The Visual Radio service uses
packet data (network service). You can listen to the FM
radio while using other applications.
The FM radio depends on an antenna other than the
wireless device antenna. A compatible headset or
enhancement needs to be attached to the device for the
FM radio to function properly.
You can listen to the radio with the built-in loudspeaker or
a compatible headset. When using the loudspeaker, keep
the headset plugged in the device. The lead of the headset
functions as the antenna of the radio, so let it hang freely.
To use the Visual Radio service, the following conditions
are required:
Warning: Listen to music at a moderate level.
Continuous exposure to high volume may damage your
hearing. Do not hold the device near your ear when the
loudspeaker is in use, because the volume may be
extremely loud.
•
•
•
The device must be switched on.
The device must have a valid SIM card inserted.
The station you listen to and the service provider you
use must support this service.
•
•
An IAP must be defined to access the service provider’s
Visual Radio server. See ‘Access points’, p. 108.
The station must have the correct Visual Radio service
ID defined and Visual Radio service enabled. See
‘Saved stations’, p. 76.
You can make a call or answer an incoming call while
listening to the radio. The radio is turned off when there is
an active call. When the call is finished, the radio is turned
back on.
The radio selects the used frequency band based on the
country information received from the network.
Download from Www.Somanuals.com. All Manuals Search And Download.
74
Visual Radio can be used for listening when the device
cover is closed. Channel information may be displayed on
the cover display. To mute or unmute the radio, press the
side scroll key.
To save the current tuned
station to your station list,
select Options > Save
station. To open the list of
your saved stations, select
Options > Stations. See
‘Saved stations’, p. 76.
Listen to the radio
Note that the quality of the radio broadcast depends on
the coverage of the radio station in that particular area.
To return to the standby
mode and leave the FM radio
playing in the background,
select Options > Play in
Connect a compatible headset to the device. The lead of
the headset functions as the radio antenna, so let it hang
freely. Press
, and select Applications > Radio.
background, or press
.
To start a station search, select
or . Searching
stops when a station is found. To change the frequency
manually, select Options > Manual tuning.
View visual content
To check availability and costs, and to subscribe to the
service, contact your service provider.
If you have previously saved radio stations, select
to go to the next or previous saved station. To select
the memory location of a station, press the corresponding
number key.
or
To view available visual content for a tuned station, select
, or in the stations view, select Options > Station >
Start visual service. If the visual service ID has not been
saved for the station, enter it, or select Retrieve to search
for it in the station directory (network service).
To adjust the volume, press
or
. To listen to the
radio using the loudspeaker, select Options > Activate
loudspeaker.
When the connection to the visual service is established,
the display shows the current visual content designed by
the content provider.
To view available stations based on location, select
Options > Station directory (network service).
Download from Www.Somanuals.com. All Manuals Search And Download.
75
To adjust display settings for the visual content view,
select Options > Display settings > Lighting or Power
saver time-out.
RealPlayer
Press
, and select Applications > RealPlayer. With
Saved stations
You can save up to 20 radio stations in Visual Radio. To
open your station list, select Options > Stations.
RealPlayer, you can play video clips or stream media files
over the air. You can activate a streaming link when you
browse web pages, or store it in the device memory or a
compatible memory card (if inserted).
To listen to a saved station, select Options > Station >
Listen. To view available visual content for a station with
Visual Radio service, select Options > Station > Start
visual service.
Tip! You can also view video clips or streaming links in
your device with other compatible UPnP devices, such
as a TV or a PC, through wireless LAN. See ‘View media
files’, p. 90.
To change station details, select Options > Station >
Edit.
RealPlayer supports files with extensions such as .3gp,
.mp4, or .rm. However, RealPlayer does not necessarily
support all file formats or all the variations of file formats.
For example, RealPlayer attempts to open all .mp4 files,
but some .mp4 files may include content that is not
compliant with standards and, therefore, is not supported
by this device.
Settings
Select Options > Settings and from the following:
Start-up tone—to select a tone to play when the
application is started
Auto-start service—To have the Visual Radio service start
automatically when you select a saved station that offers
visual service, select Yes.
Play video clips
1 To play a media file stored in device memory or on a
compatible memory card (if inserted), select Options >
Open and from the following:
Access point—To select the access point used for the data
connection. You do not need an access point to use the
application as an ordinary FM radio.
Most recent clips—to play one of the last six files
played in RealPlayer
Download from Www.Somanuals.com. All Manuals Search And Download.
76
Saved clip—to play a file saved in Gallery
begins streaming, your device connects to the site and
starts loading the content. The content is not saved in your
device.
See ‘Gallery’, p. 31.
2 Scroll to a file, and press
Tip! To view a video clip in full screen mode,
Receive RealPlayer settings
You may receive RealPlayer settings in a special text
message from the service provider. See ‘Data and settings’,
p. 47. For more information, contact your service provider.
press
. Press again to change back to normal screen
mode.
Shortcuts during play are as follows:
•
•
•
To fast forward, press and hold
To rewind through the media file, press and hold
To mute the sound, press and hold until
displayed. To turn on the sound, press and hold
until you see
.
.
Change the RealPlayer settings
Select Options > Settings and from the following:
is
Video—to have RealPlayer automatically repeat video
clips after they finish playing
.
Stream content over the air
Many service providers require you to use an IAP for your
default access point. Other service providers allow you to
use a WAP access point.
Connection—to select whether to use a proxy server,
change the default access point, and set the port range
used when connecting. Contact your service provider for
the correct settings.
Proxy sett.—
The access points may be configured when you first start
your device.
• Use proxy—To use a proxy server, select Yes.
• Proxy serv. address—Enter the IP address of the proxy
server.
Contact your service provider for more information.
In RealPlayer, you can only open an rtsp:// URL address.
However, RealPlayer recognizes an http link to a .ram file.
• Proxy port number—Enter the port number of the
proxy server.
Glossary: Proxy servers are intermediate servers between
media servers and their users. Some service providers
use them to provide additional security or speed up
To stream content over the air, select a streaming link
saved in Gallery, on a web page, or received in a text
message or multimedia message. Before live content
Download from Www.Somanuals.com. All Manuals Search And Download.
77
access to browser pages that contain sound or video
clips.
Movie director
Netw. sett.—
Press
, and select Applications > Movie, or launch it
• Default access point—Scroll to the access point you
want to use to connect to the internet, and press
• Online time—Set the time for RealPlayer to
from the gallery. Muvees are styled video clips that can
contain videos, images, music, and text. The style
determines the transitions, visual effects, graphics, music,
and text that are used in the muvee.
.
disconnect from the network when you pause a media
clip playing through a network link. Select User
defined, and press
. Enter the time, and select OK.
Create muvees
• Lowest UDP port—Enter the lowest port number of
the server’s port range. The minimum value is 1024.
• Highest UDP port—Enter the highest port number of
the server’s port range. The maximum value is 65535.
1
In the Movie director main view, select the videos and
images with which you want to create a muvee, and
select Options > Create muvee; or open Images &
video in Gallery. Select the video clips and images with
which you want to create a muvee, and select
Options > Edit > Create muvee.
Select Options > Advanced settings to edit the
bandwidth values for different networks.
2 Select a style for the muvee from the style list. Movie
director uses the music and text associated with the
chosen style.
Adobe Flash Player
3 Select Options > Create muvee.
To view, play, and interact with compatible flash files
The muvee is created automatically, and a Preview view is
displayed. You can select Save to save the muvee in
Gallery, Recreate to shuffle the media files and create a
new muvee, or Back to select a different style for your
muvee. You can also select Customise to change the
made for mobile devices, press
Applications > Flash Player. Scroll to a flash file, and
press
, and select
.
Download from Www.Somanuals.com. All Manuals Search And Download.
78
muvee settings and create a custom muvee to which you
can add images, music, and text.
Auto-select, or Same as music. If the muvee duration
is less than the music duration, the muvee is repeated
to match the music duration. If the muvee duration is
longer than the music duration, the music is repeated
to match the muvee duration.
Create a custom muvee
1 In the Movie director main view, select the videos and
images with which you want to create a muvee, and
select Options > Create muvee; or select Images &
video in Gallery. Select the videos and images with
which you want to create a muvee, and select
Options > Edit > Create muvee.
2 Select a style for the muvee from the style list. In the
style view, select Options > Customise and from the
following:
Settings—to change the settings for muvee
production. Select from the following:
• Memory in use—Select where to store your muvees.
• Resolution—Select the resolution of your muvees.
• Default muvee name—Set a default name for the
muvees.
3 Select Options > Create muvee.
The muvee is created automatically and Preview is
displayed. You can select Save to save the muvee in the
gallery, Recreate to shuffle the media files and create a
new muvee, or Customise to return to the muvee settings.
Videos & Images—select from the following:
• Move—to reorder the position of video clips and
images in the custom muvee
• Select contents—to select video segments to
Games
include or exclude in the muvee
• Add/Remove—to add or remove video clips and
images or Add/Remove > Capture to open the
camera application to capture new video clips and
images
Press
, and select Applications and a game. For
instructions on how to play the game, select Options >
Help.
Music—to select a music clip from the list
Message—to edit the Opening message and Closing
message
Length—to define the duration of the muvee, select
User defined. Select Multimedia message,
Download from Www.Somanuals.com. All Manuals Search And Download.
79
Internet
Web feeds and blogs
Web
by the weblog community to share the latest entries'
headlines or their full text, for example, recent news. It is
common to find web feeds on web, blog and wiki pages. To
subscribe to a web feed on web pages, select Options >
Subscribe. To view the web feeds you have subscribed to,
in the web bookmarks view, select Web feeds.
Press
, and select Internet > Web (network service).
Various service providers maintain pages specifically
designed for mobile devices. These pages use the wireless
markup language (WML), extensible hypertext markup
language (XHTML), or hypertext markup language (HTML).
Check the availability of services, pricing, and fees with
your service provider. Service providers will also give you
instructions on how to use their services.
Blogs or weblogs are web diaries. To download a web feed
or blog on the web, scroll to it, and press
.
Browse
With this browser, you are able to view normal web pages,
to zoom in and out on a page (Mini Map), to view web
pages that contain only text in narrow form so that text
wraps, and to read feeds and blogs.
To download a page, select a bookmark, and press
can also enter the address in the field ( ).
. You
Keyboard shortcuts
•
Press
windows are open.
Press
Press
Press
Press
to close the current window if two or more
For more information on web access points, see ‘Web
access point’, p.68.
•
•
•
•
to open your bookmarks.
Important: Use only services that you trust and
that offer adequate security and protection against
harmful software.
to search for text in the current page.
to return to the previous page.
to list all open windows.
Download from Www.Somanuals.com. All Manuals Search And Download.
80
•
Press
to show the page overview. Press
again
To delete the information the network server collects
about your visits to various web pages, select Options >
Advanced options > Delete cookies.
to zoom in and view the desired information.
Press
Press
•
•
to go to a different web page.
to go to the start page.
To empty the temporary memory that stores information
about your visits to different websites, select Options >
Advanced options > Clear cache.
To zoom the page in or out, press
or
.
To allow or prevent the automatic opening of multiple
windows, select Options > Settings > Block pop-ups >
Yes.
WLAN wizard
To view the web pages you have visited during the current
browsing session, select Options > Navigation options >
History. To have the list of the previous pages
automatically shown when you return to the previous
page, select Options > Settings > History list > On.
The WLAN wizard helps you to connect to a wireless LAN
and manage your wireless LAN connections.
The WLAN wizard shows the status of your wireless LAN
connections in the active standby mode. To view the
available options, scroll to the row showing the status,
Search information
Use Mini Map to view and search for information on web
pages that contain large amounts of information. When
Mini Map is on, web automatically zooms out and shows
an overview of the web page you browse. When you find
the desired information, Mini Map automatically zooms
in. To set Mini Map on, select Options > Settings > Mini
map > On.
and press
.
If the search finds wireless LANs, and for example, WLAN
network found is displayed, to automatically create an
IAP and start the web browser using this IAP, select the
status, the option Start Web browsing, and the network.
If you select a secured wireless LAN network, you are
asked to enter the relevant passcodes. To connect to a
hidden network, you must enter the correct network name
(service set identifier, SSID).
End connection
To end the connection to the web, select Options >
Advanced options > Disconnect.
Download from Www.Somanuals.com. All Manuals Search And Download.
81
If you are connected to a wireless LAN, the IAP name is
displayed. To start the web browser using this IAP, select
the status and the option Continue Web browsing. To
end the connection in the wireless LAN, select the status
and the option Disconnect WLAN.
You can also use Conn. mgr. to create IAPs. See
‘Connection manager’, p. 91.
Operating modes
There are two operating modes in wireless LAN:
infrastructure and ad hoc.
If wireless LAN scanning is off and you are not connected
to any wireless LAN, WLAN scanning off is displayed. To
set scanning on and search for available wireless LANs,
select the status WLAN scanning off.
The infrastructure operating mode allows two kinds of
communication: wireless devices are connected to each
other through a wireless LAN access point device, or
wireless devices are connected to a wired LAN through a
wireless LAN access point device.
To start a search for available wireless LANs, select a
status and the option Search for WLAN. To set wireless
LAN scanning off, select a status and the option WLAN
scanning off.
In the ad hoc operating mode, devices can send and receive
data directly with each other. To create an IAP for an ad
hoc network, see ‘Access points’, p. 108.
To access the WLAN wizard in the menu, press
, and
select Internet > WLAN wiz..
Wireless LAN access points
To search for wireless LANs available within range, press
, and select Internet > WLAN wiz.. To create an IAP in
a wireless LAN, select Options > Define access point. To
view the details of a network shown in the list, select
Options > Details.
When an application asks you to select an access point,
select the created access point. You can also create an IAP
by selecting Search for WLAN.
Download from Www.Somanuals.com. All Manuals Search And Download.
82
Connectivity
PC connections
Data cable
You need to connect your device to a compatible PC to do
the following:
Press
, and select Connect. > Data cbl.. > Media
•
Transfer information between Nokia PC Suite
applications and your device. For example, to
synchronize calendar appointments or transfer images.
Use your device as a modem to connect to network
services such as the internet.
player, PC Suite, Mass storage, or Image print. To have
the device ask the purpose of the connection each time
the cable is connected, select Ask on connection.
•
Bluetooth connectivity
You can connect your device and a compatible PC via a
compatible USB or serial cable, infrared, or Bluetooth
wireless technology.
You can connect wirelessly to other compatible devices
with wireless Bluetooth technology. Compatible devices
may include mobile phones, computers, and
Detailed installation instructions can be found in the user
guide for Nokia PC Suite.
enhancements such as headsets and car kits. You can use
Bluetooth connectivity to send images, video clips, music
and sound clips, and notes; connect wirelessly to your
compatible PC (for example, to transfer files); and connect
to a compatible printer to print images with Image print.
See ‘Image print’, p. 40.
Tip! When using Nokia PC Suite for the first time, to
connect your device to a compatible PC and to use
Nokia PC Suite, use the Get Connected wizard available
in Nokia PC Suite.
Since devices with Bluetooth technology communicate
using radio waves, your device and the other device do not
need to be in direct line-of-sight. The two devices only
Download from Www.Somanuals.com. All Manuals Search And Download.
83
need to be within 10 meters (33 feet) of each other, but
the connection may be subject to interference from
obstructions such as walls or from other electronic
devices.
features, increase the demand on battery power and
reduce the battery life.
When the device is locked, you cannot use Bluetooth
connectivity. See ‘Security’, p. 111 for more information on
locking the device.
This device is compliant with Bluetooth Specification 2.0
supporting the following profiles: Basic Printing Profile,
Generic Access Profile, Serial Port Profile, Dial-up
Networking Profile, Headset Profile, Hands-free Profile,
Generic Object Exchange Profile, Object Push Profile, File
Transfer Profile, Basic Imaging Profile, SIM Access Profile,
and Human Interface Device Profile. To ensure
interoperability between other devices supporting
Bluetooth technology, use Nokia approved enhancements
for this model. Check with the manufacturers of other
devices to determine their compatibility with this device.
Settings
Press
, and select Connect. > Bluetooth. When you
open the application for the first time, you are asked to
define a name for your device. After you set Bluetooth
connectivity on and change My phone's visibility to
Shown to all, your device and this name can be seen by
other users with devices using Bluetooth technology.
Select from the following:
Glossary: A profile corresponds to a service or a
function, and defines how different devices connect.
For example, the Hands-free Profile is used between
the handsfree device and the phone. For devices to be
compatible, they must support the same profiles.
Bluetooth—Select On or Off. To connect wirelessly to
another compatible device, first set Bluetooth connectivity
On, then establish a connection.
My phone's visibility—To allow your device to be found by
other devices with Bluetooth technology, select Shown to
all. To hide it from other devices, select Hidden.
There may be restrictions on using Bluetooth technology
in some locations. Check with your local authorities or
service provider.
My phone's name—Edit the name of your device.
Remote SIM mode—To enable another device, such as a
compatible car kit enhancement, to use the SIM card in
your device to connect to the network, select On.
Features using Bluetooth technology, or allowing such
features to run in the background while using other
Download from Www.Somanuals.com. All Manuals Search And Download.
84
Remote SIM mode
Security tips
To use the remote SIM mode with a compatible car kit
enhancement, set Bluetooth connectivity on, and enable
the use of the remote SIM mode with your device. Before
the mode can be activated, the two devices must be paired
and the pairing initiated from the other device. When
pairing, use a 16-digit passcode, and set the other device
as authorized. See ‘Pair devices’, p. 86. Activate the remote
SIM mode from the other device.
When you are not using Bluetooth connectivity, select
Bluetooth > Off or My phone's visibility > Hidden. In
this way, you can better control who can find your device
with Bluetooth wireless technology, and connect to it.
Do not pair with or accept connection requests from an
unknown device. In this way, you can better protect your
device from harmful content.
When the remote SIM mode is on in your Nokia device,
Remote SIM is displayed in the standby mode. The
connection to the wireless network is turned off, as
Send data
Several Bluetooth connections can be active at a time. For
example, if you are connected to a headset, you can also
transfer files to another compatible device at the same
time.
indicated by
in the signal strength indicator area, and
you cannot use SIM card services or features requiring
cellular network coverage. However, a wireless LAN
connection remains active during the remote SIM mode.
Bluetooth connectivity indicators
•
•
•
When
connectivity is on.
When
with another device.
is shown in the standby mode, Bluetooth
When the wireless device is in the remote SIM mode, you
can only use a compatible connected enhancement, such
as a car kit, to make or receive calls. Your wireless device
will not make any calls, except to the emergency numbers
programmed into your device, while in this mode. To make
calls from your device, you must first leave the remote SIM
mode. If the device has been locked, enter the lock code to
unlock it first.
is blinking, your device is trying to connect
When
is shown continuously, data is being
transmitted using Bluetooth connectivity.
1 Open the application where the item you want to send
is stored. For example, to send an image to another
compatible device, open Gallery.
To exit the remote SIM mode, press
, and select Exit
rem. SIM mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
85
2 Select the item and Options > Send > Via Bluetooth.
Devices with Bluetooth technology within range start
to appear on the display.
To pair with a device, select Options > New paired device.
Devices with wireless Bluetooth technology within range
start to appear on the display. Select the device, and enter
the passcode. The same passcode must be entered on the
other device as well. After pairing, the device is saved to
the paired devices view.
Device icons are:
video device, and
computer, phone,
other device.
audio or
To interrupt the search, select Stop.
3 Select the device with which you want to connect.
4 If the other device requires pairing before data can be
transmitted, a tone sounds, and you are asked to enter
a passcode. See ‘Pair devices’, p. 86.
Paired devices are indicated by
in the device search.
To set a device as authorized or unauthorized, scroll to a
device, and select from the following options:
5 When the connection has been established, Sending
Set as authorised—Connections between your device and
this device can be made without your knowledge. No
separate acceptance or authorization is needed. Use this
status for your own devices, such as your compatible
headset or PC, or devices that belong to someone you trust.
indicates authorized devices in the paired devices view.
data is shown.
Sent in Messag. does not store messages sent using
Bluetooth connectivity.
Tip! When searching for devices, some devices may
show only the unique address (device address). To find
the unique address of your device, enter the code
*#2820# in the standby mode.
Set as unauthorised—Connection requests from this
device must be accepted separately every time.
To cancel a pairing, scroll to the device, and select
Options > Delete. If you want to cancel all pairings, select
Options > Delete all.
Pair devices
To open the paired devices view (
application main view, press
), in the Bluetooth
Tip! If you are currently connected to a device and
delete the pairing with that device, pairing is removed
immediately, and the connection is switched off.
.
Before pairing, create your own passcode (1-16 digits),
and agree with the owner of the other device to use the
same code. Devices that do not have a user interface have
a factory-set passcode. The passcode is used only once.
Download from Www.Somanuals.com. All Manuals Search And Download.
86
preferable distance between the two devices is up to 1
meter (3 feet).
Receive data
When you receive data through Bluetooth connectivity, a
tone sounds, and you are asked if you want to accept the
2 The user of the receiving device activates the infrared
port.
message. If you accept,
is shown, and the item is
To activate the infrared port of your device to receive
placed in Inbox in Messag.. Messages received through
Bluetooth connectivity are indicated by . See ‘Inbox—
receive messages’, p. 46.
data through infrared, press
, and select
Connect. > Infrared.
3 The user of the sending device selects the desired
infrared function to start the data transfer.
To send data through infrared, locate the desired file in
an application or the file manager, and select
Options > Send > Via infrared.
Switch off
To switch off Bluetooth connectivity, select Bluetooth >
Off.
If data transfer is not started within 1 minute after the
activation of the infrared port, the connection is cancelled
and must be started again.
Infrared connection
All items received through infrared are placed in Inbox in
Messaging. New infrared messages are indicated by
.
With infrared, you can transfer data such as business
cards, calendar notes, and media files with a compatible
device.
When
blinks, your device is trying to connect to the
other device or a connection has been lost.
Do not point the infrared (IR) beam at anyone's eye or
allow it to interfere with other IR devices. This device is a
Class 1 laser product.
When is shown continuously, the infrared
connection is active, and your device is ready to send and
receive data using its infrared port.
Send and receive data using infrared
1 Ensure that the infrared ports of the sending and
receiving devices are pointing at each other, and that
there are no obstructions between the devices. The
Download from Www.Somanuals.com. All Manuals Search And Download.
87
Important: Always enable one of the available
encryption methods to increase the security of your
wireless LAN connection. Using encryption reduces the risk
of unauthorized access to your data.
Home network
Your device is compatible with UPnP. Using a wireless LAN
access point device or a wireless LAN router, you can
create a home network and connect compatible UPnP
devices that support wireless LAN to the network, such as
your Nokia device, a compatible PC, a compatible printer,
and a compatible sound system or a TV, or a sound system
or TV equipped with a compatible wireless multimedia
receiver.
Your device is connected to the home network only if you
accept a connection request from another device; or in
Gallery, select the option to view, play, print, or copy
media files on your Nokia device or search for other devices
in Home net..
Important security information
Using the wireless LAN function of the Nokia device in a
home network requires a working wireless LAN home
connection setup and the other target home devices to be
UPnP enabled and to be connected to the same home
network.
When you configure your wireless LAN home network,
enable an encryption method, first on your access point
device, then on the other devices you intend to connect to
your home network. Refer to the documentation of the
devices. Keep any passcodes secret and in a safe place
separate from the devices.
You can share media files saved in Gallery with other
compatible UPnP devices using the home network. To
manage the settings for Home net., press
Connect. > Home net.. You can also use the home
network to view, play, copy, or print compatible media
files from Gallery. See ‘View media files’, p. 90.
To view or change the settings of the wireless LAN IAP in
your Nokia device, see ‘Access points’, p. 108.
, and select
If you use the ad hoc operating mode to create a home
network with a compatible device, enable one of the
encryption methods in WLAN security mode when you
configure the IAP. This step reduces the risk of an
unwanted party joining the ad hoc network.
The home network uses the security settings of the
wireless LAN connection. Use the home network feature
in a wireless LAN infrastructure network with a wireless
LAN access point device and encryption enabled.
Download from Www.Somanuals.com. All Manuals Search And Download.
88
Your device notifies you if another device attempts to
connect to it and the home network. Do not accept
connection requests from an unknown device.
The options related to Home net. are not available in
Gallery before the settings for Home net. have been
configured.
If you use wireless LAN in a network that does not have
encryption, switch off sharing files with other devices, or
do not share any private media files. To change sharing
settings, see ‘Home network settings’, p. 89.
Configure settings
To configure Home net., select Connect. > Home net. >
Settings and from the following:
Home access point—Select Always ask if you want the
device to ask for the home access point every time you
connect to the home network, User defined to select your
home IAP that is used automatically when you use Home
net., or None. If your home network does not have
wireless LAN security settings enabled, you get a security
warning. You can continue and switch on the wireless LAN
security on later; or cancel defining the access point, and
first switch on the wireless LAN security. See Wireless LAN
in ‘Access points’, p. 108.
UPnP wizard
When you access the home network application for the
first time, the setup wizard opens, and helps you to define
the home network settings for your device. To use the
setup wizard later, in the home network main view, select
Options > Run wizard, and follow the instructions on the
display.
To connect a compatible PC to the home network, on the
PC, you must install the Home Media Server software from
the DVD-ROM supplied with your device.
Device name—Enter a name for your device that is shown
to the other compatible devices in the home network.
Set sharing on and define content
Home network settings
Select Connect. > Home net. > Share content.
To share media files saved in Gallery with other compatible
UPnP devices through wireless LAN, you must create and
configure your wireless LAN home IAP; then configure the
Home net. application. See ‘Wireless LAN’, p. 18.
Content sharing—Allow or deny sharing media files with
compatible devices. Do not set Content sharing on before
you have configured all the other settings. If you set
Content sharing on, the other UPnP compatible devices in
Download from Www.Somanuals.com. All Manuals Search And Download.
89
the home network can view and copy your files you have
selected for sharing in Images & video and Music.
3 Select a compatible device in which the media file is
shown. The images are shown both in the other home
network device and your device and the video clips and
sound clips are played only in the other device.
To select media files for sharing with other devices from
Images & video and Music or to view their sharing status,
select Share content.
Media files stored in the other device
To select media files that are stored on another home
network device, and show them in your device (or in a
compatible TV), do the following:
View media files
To connect a compatible PC to the home network, you
must install the Home Media Server software from the
DVD-ROM supplied with your Nokia device.
1 In Gallery, select Home net.. Your device starts the
search of other compatible devices. Device names start
to appear on the display.
If Content sharing is on in your device, the other UPnP
compatible devices in the home network can view and
copy the media files you have selected to share in Share
content. If you do not want the other devices to access
your files, set Content sharing off. Even if Content
sharing is off in your device, you can still view and copy
the media files stored in another home network device if
it is allowed by the other device.
2 Select a device from the list.
3 Select the type of media you want to view from the
other device. The available file types depend on the
features of the other device.
4 Select the image, video clip, or music clip you want to
view, and select Options > Show via home net.
(images and video) or Play via home network (music).
5 Select the device in which the file is shown.
Media files stored in your device
To select images, videos, and sound clips stored in your
device and show them in another home network device,
such as a compatible TV, do the following:
1 In Gallery, select an image, a video clip, or a sound
clip.
2 Select Options > Show via home net.
To stop sharing the media file, select Options > Stop
showing.
To print images saved in Gallery through Home net. with
a UPnP compatible printer, select the print option in
Gallery. See ‘Image print’, p. 40. Content sharing does not
have to be switched on.
Download from Www.Somanuals.com. All Manuals Search And Download.
90
To search files with different criteria, select Options >
Find. To sort the found files, select Options > Sort by.
compatibility, contact the supplier of the application with
which you want to synchronize your device data.
You may receive synchronization settings in a special text
message. See ‘Data and settings’, p. 47.
Copy media files
To copy or transfer media files from your device to another
compatible device, such as a UPnP compatible PC, select a
file in Gallery and Options > Move and copy > Copy to
home network or Move to home network. Content
sharing does not have to be switched on.
Synchronize data
In the Sync main view, you can see the different
synchronization profiles.
1 Select a synchronization profile and Options >
Synchronise. The status of the synchronization is
shown on the display.
To cancel synchronization before it finishes, select
Cancel.
2 You are notified when the synchronization is complete.
Select Yes to view the log file showing the
synchronization status and how many entries have
been added, updated, deleted, or discarded (not
synchronized) in your device or on the server.
To copy or transfer files from the other device to your
device, select a file in the other device and Options > Copy
to phone mem. or Copy to memory card (the name of the
memory card if a compatible memory card is available).
Content sharing does not have to be switched on.
Synchronization
Press
, and select Connect. > Sync. Sync enables you
Connection manager
to synchronize your notes, calendar, contacts, or e-mail
with various compatible calendar and address book
applications on a compatible computer or on the internet.
You can also create or edit synchronization settings.
Press
, and select Connect. > Conn. mgr.. To view the
status of data connections or end connections in GSM and
UMTS network and wireless LAN, select Act. data conn..
To search for wireless LANs available within range, select
Availab. WLAN.
The synchronization application uses SyncML technology
for synchronization. For information on SyncML
Download from Www.Somanuals.com. All Manuals Search And Download.
91
3 The device creates an IAP with default settings. To view
Data connections
In the active connections view, you can see the open data
connections: data calls ( ), packet data connections (
or ), and wireless LAN connections ( ).
or change these settings, see ‘Access points’, p. 108.
Device manager
Note: The actual time invoiced for calls by your
service provider may vary, depending on network
features, rounding off for billing, and so forth.
Press
, and select Connect. > Dev. mgr.. You may
receive server profiles and different configuration settings
from your service provider, or company information
management department. These configuration settings
may include access point settings for data connections and
other settings used by different applications in your device.
To end a connection, select Options > Disconnect. To
close all open connections, select Options > Disconnect
all.
To view the details of a connection, select Options >
Details. The details shown depend on the connection type.
To connect to a server and receive configuration settings
for your device, scroll to a profile, and select Options >
Start configuration.
Wireless LAN
The available wireless LAN view shows a list of wireless
To allow or deny receiving of configuration settings from
service providers, select Options > Enable config. or
Disable config..
LANs within range, their network mode (Infrastructure or
Ad-hoc), and signal strength indicator.
is shown for
networks with encryption, and
if your device has an
active connection in the network.
Server profile settings
To view the details of a network, select Options > Details.
Create an IAP
Contact your service provider for the correct settings.
1 Press
, and select Connect. > Conn. mgr. >
Server name—Enter a name for the configuration server.
Availab. WLAN.
Server ID—Enter the unique ID to identify the
configuration server.
2 The device searches for wireless LANs within range.
Scroll to the network in which you want to create an
IAP, and select Options > Define access point.
Download from Www.Somanuals.com. All Manuals Search And Download.
92
Server password—Enter a password to identify your device
to the server.
modem, press . For how to connect the devices, see
‘Infrared connection’, p. 87.
Session mode—Select the connection type that is used to
connect to the server: Internet or Bluetooth.
Access point—Select an access point to be used when
connecting to the server.
Host address—Enter the URL address of the server.
Port—Enter the port number of the server.
User name and Password—Enter your user name and
password.
Allow configuration—To receive configuration settings
from the server, select Yes.
Auto-accept all reqs.—If you want your device to ask for
confirmation before accepting a configuration from the
server, select No.
Network authentic.—Select if network authentication is
used.
Modem
Press
, and select Connect. > Modem. To connect your
device to a compatible PC through infrared, to use it as a
Download from Www.Somanuals.com. All Manuals Search And Download.
93
Office
Base currency and exchange rates
Recorder
Select Type > Currency > Options > Currency rates.
Before you can make currency conversions, you must select
a base currency and add exchange rates. The rate of the
base currency is always 1.
To record voice memos, press
, and select Office >
Recorder. To record a telephone conversation, open
Recorder during a voice call. Both parties hear a tone
every 5 seconds during recording.
Note: When you change base currency, you must
enter new exchange rates because all previously set
exchange rates are cleared.
Converter
Calculator
To convert measures from one unit to another, press
,
and select Office > Converter.
Press
, and select Office > Calculator.
Converter has limited accuracy, and rounding errors may
occur.
Note: This calculator has limited accuracy and is
designed for simple calculations.
1 In the Type field, select the measure you want to use.
2 In the first Unit field, select the unit from which you
want to convert. In the next Unit field, select the unit
to which you want to convert.
Notes
3 In the first Amount field, enter the value you want to
convert. The other Amount field changes
To write notes in .txt format, press
Notes.
, and select Office >
automatically to show the converted value.
Download from Www.Somanuals.com. All Manuals Search And Download.
94
Quickword
With Quickword, you can view native Microsoft Word
documents with your device.
Zip manager
Use the Zip manager application to compress files.
Compressed files use less memory and are more convenient
to send to compatible devices.
Quickword supports the viewing of documents saved in
.doc and .txt format created with Microsoft Word 97,
2000 and XP. Not all variations or features of the
mentioned file formats are supported.
To open the application, press
, and select Office > Zip.
To create or manage archives or to change the settings,
select Options and the desired option.
To open a document, press
Quickoffice > Quickword and the document.
, and select Office >
You can store archive files on the device or on a compatible
memory card.
See also ‘More information’, p. 96.
Quicksheet
With Quicksheet, you can view Microsoft Excel files with
your device.
Quickoffice
With Quickoffice, you can view .doc, .xls, .ppt, and .txt
documents. All file formats or features are not supported.
Apple Macintosh is not supported.
Quicksheet supports the viewing of spreadsheet files
saved in .xls format created with Microsoft Excel 97, 2000,
or XP. Not all variations or features of the mentioned file
formats are supported.
To use the Quickoffice applications, press
, and select
Office > Quickoffice. A list of files in the .doc, .xls, .ppt,
and .txt file formats saved on your device and on the
memory card opens.
To open a spreadsheet, press
Quickoffice > Quicksheet and the spreadsheet.
, and select Office >
See also ‘More information’, p. 96.
To open Quickword, Quicksheet, or Quickpoint, press
to reach the desired view.
Download from Www.Somanuals.com. All Manuals Search And Download.
95
provides only a limited set of features compared with PC
versions.
Quickpoint
With Quickpoint, you view Microsoft PowerPoint
presentations with your device.
To open documents, press
PDF. Your recent files are listed in the file view. To open a
document, scroll to it, and press
, and select Office > Adobe
Quickpoint supports the viewing of presentations created
in .ppt format created with Microsoft PowerPoint 2000
and XP. Not all variations or features of the mentioned file
formats are supported.
.
Use File mgr. to browse and open documents stored in the
device memory and on the memory card.
To open a presentation, press
Quickoffice > Quickpoint and the presentation.
, and select Office >
More information
For more information, visit www.adobe.com.
See also ‘More information’, p. 96.
To share questions, suggestions, and information about the
application, visit the Adobe Reader for Symbian OS user
forum at http://adobe.com/support/forums/main.html.
More information
If you experience problems with Quickword, Quicksheet,
or Quickpoint, visit www.quickoffice.com for more
information. Support is also available by sending an
e-mail to [email protected].
Barcode reader
Use the barcode reader application to decode different
types of codes (such as barcodes and codes in magazines).
The codes may contain information such as URL links,
e-mail addresses, and phone numbers.
Adobe reader
With Adobe Reader, you can read PDF documents on the
display of your device.
To scan and decode barcodes, press
, and select
Office > Barcode.
This application has been optimized for PDF document
content on handsets and other mobile devices, and
Download from Www.Somanuals.com. All Manuals Search And Download.
96
To scan a code, select Scan code. Set the code between the
The device reverts to the standby mode to save battery
power if Barcode cannot be activated or if no keys are
red lines on the display. The Barcode attempts to scan and
decode the code, and the decoded information is displayed. pressed for 1 minute. To continue scanning or viewing
saved information, press
.
To save the scanned data, select Options > Save. The data
is saved in .bcr format.
To view previously saved, decoded information in the main
view, select Saved data. To open a code, press
.
When viewing the decoded information, the different links,
URL links, phone numbers, and e-mail addresses are
indicated by icons on the top of the display in the direction
they appear in the decoded information.
In the Saved data view, select Options and from the
following:
Scan new code—to scan a new code
Open link—to open a URL link
Add to bookmarks—to save a URL link to the bookmarks
in Web
Create message—to send a text message or an e-mail to a
compatible device
Add to Contacts—to add a phone number, e-mail address,
or URL address to Contacts
Call—to call a phone number
The available options may vary depending on the
highlighted link.
Download from Www.Somanuals.com. All Manuals Search And Download.
97
Personalize your device
Your service provider may have requested that certain
features be disabled or not activated in your device. If so,
they do not appear on your device menu. Your device may
also have been specially configured for your service
provider. This configuration may include changes in menu
names, menu order, and icons. Contact your service
provider for more information.
•
selection keys in the standby mode, see ‘Standby mode’,
p. 105.
, and select Applications > Clock > Options >
Settings > Clock type > Analogue or Digital.
To change the welcome note to an image or animation,
press , and select Tools > Settings > Phone >
General > Welcome note / logo.
To change the main menu view, in the main menu,
select Options > Change view > Grid or List.
To rearrange the main menu, in the main menu, select
Options > Move, Move to folder, or New folder. You
can move less used applications into folders, and place
applications that you use more often into the main
menu.
•
•
The images in this guide may differ from your device
display.
•
To use the standby display for fast access to your most
frequently used applications, see ‘Active standby
mode’, p. 100.
•
•
•
To change the standby
mode background image
or what is shown in the
screen saver, see ‘Change
the look of your device’,
p. 100.
•
To customize the ringing
tones, see ‘Profiles—set
tones’, p. 98 and ‘Add
Profiles—set tones
ringing tones for
contacts’, p. 57.
To set and customize the ringing tones, message alert
tones, and other tones for different events, environments,
or caller groups, press , and select Tools > Profiles.
Download from Www.Somanuals.com. All Manuals Search And Download.
98
To change the profile, press
Scroll to the profile you want to activate, and select OK.
in the standby mode.
When the offline profile is active, you can use your device
without a (U)SIM card.
To modify a profile, press , and select Tools > Profiles.
Important: In the offline profile you cannot make
or receive any calls, or use other features that require
cellular network coverage. Calls may still be possible to
the official emergency number programmed into your
device. To make calls, you must first activate the phone
function by changing profiles. If the device has been
locked, enter the lock code.
Scroll to the profile, and select Options > Personalise.
Scroll to the setting you want to change, and press
open the choices. Tones stored on the memory card are
to
indicated with
. You can scroll through the tone list
and listen to each one before you make your selection. To
stop the sound, press any key.
When you choose a tone, Tone downloads opens a list of
bookmarks. You can select a bookmark and start a
connection to a web page to download tones.
When you have activated the offline profile, you can still
use the wireless LAN (if available), for example, to read
your e-mail or browse on the internet. Remember to
comply with any applicable safety requirements when
establishing and using a wireless LAN connection. See
‘Wireless LAN’, p. 18.
If you want the caller’s name to be said when your device
rings, select Options > Personalise > Say caller's name >
On. The caller’s name must be saved in Contacts.
To exit the offline profile, press
, and select another
To create a new profile, select Options > Create new.
profile. The device reenables wireless transmissions
(providing there is sufficient signal strength). If a
Bluetooth connectivity is activated before using the
offline profile, it is deactivated. A Bluetooth connectivity
is automatically reactivated after you exit the offline
profile. See ‘Settings’, p. 84.
Offline profile
The offline profile lets you use the device without
connecting to the wireless network. When you activate the
offline profile, the connection to the wireless network is
turned off, as indicated by
in the signal strength
indicator area. All wireless phone signals to and from the
device are prevented. If you try to send messages, they are
placed in the outbox to be sent later.
Download from Www.Somanuals.com. All Manuals Search And Download.
99
Change the look of your
device
Active standby mode
Use your standby display for fast access to your most
frequently used applications. By default, the active
standby mode is on.
To change the look of the display, such as the wallpaper
and icons, press , and select Tools > Themes. The active
Press , select Tools > Settings > Phone > Standby
mode > Active standby, and press
standby on or off.
theme is indicated by
. In Themes you can group
to switch the active
together elements from other themes or select images
from the Gallery to personalize themes further. The
themes on a compatible memory card (if inserted) are
The active standby display is
shown with default
applications across the top of
the screen, and calendar,
to-do, and player events
listed below.
indicated by
. The themes on the memory card are not
available if the memory card is not inserted in the device.
If you want to use the themes saved in the memory card
without the memory card, save the themes in the device
memory first.
To open a browser connection and download more
themes, select Theme downloads.
Scroll to an application or
event, and press
.
To activate a theme, scroll to it, and select Options >
Apply. To preview a theme before activating it, select
Options > Preview.
The standard scroll key
shortcuts available in the
standby mode cannot be used
when the active standby
mode is on.
To edit themes, scroll to a theme, and select Options >
Edit to change the settings for Wallpaper and Power
saver.
To change the default applications shortcuts, press
,
select Tools > Settings > Phone > Standby mode >
To restore the selected theme to its original settings,
select Options > Restore orig. theme when you edit a
theme.
Active standby apps., and press
.
Some shortcuts may be fixed, and you are not able to
change them.
Download from Www.Somanuals.com. All Manuals Search And Download.
100
Tools
Multimedia key
Voice commands
To open the default shortcut assigned to the multimedia
You can use voice commands to control your device. For
more information about the enhanced voice commands
supported by your device, see ‘Voice dialing’, p. 59.
key, press and hold
applications, press
. To open a list of multimedia
. To open the desired application,
use the scroll key. To exit the list without selecting an
application, press
To activate enhanced voice commands for starting
.
applications and profiles, press
, and select Tools >
To change the shortcuts, press
and
. To change the
, select
Voice cm. > Profiles. The device creates voice tags for the
applications that are shown when you press
applications and profiles. To use enhanced voice
Top, Left, Middle, and Right and the application.
commands, press and hold
say a voice command. The voice command is the name of
the application or profile displayed in the list.
in the standby mode, and
Some shortcuts may be fixed, and you are not able to
change them.
To add more applications to the list, select Options > New
application. To add a second voice command that can be
used to start the application, select Options > Change
command, and enter the new voice command as text.
Avoid very short names, abbreviations, and acronyms.
TV configuration
Press
, and select Tools > TV out. Select from the
following:
To listen to the synthesized voice tag, select Options >
Playback.
TV system—Select PAL for PAL and SECAM TV system
format or NTSC for NTSC TV system format.
To change voice command settings, select Options >
Settings. To switch off the synthesizer that plays
Ratio—Select 4:3 or 16:9.
Download from Www.Somanuals.com. All Manuals Search And Download.
101
recognized voice tags and commands in the selected
device language, select Synthesiser > Off. To reset voice
recognition learning (for example, when the main user of
the device has changed), select Reset voice adapts..
Install applications and software
indicates a .sis application,
a Java application,
that the application is not fully installed, and
application is installed on a compatible memory card.
that the
Important: Only install and use applications and
other software from trusted sources, such as applications
that are Symbian Signed or have passed the Java VerifiedTM
testing.
Application manager
Press
, and select Tools > App. mgr.. You can install
two types of applications and software to your device:
Before installation, note the following:
•
•
J2ME™ applications based on Java technology with
the extension .jad or .jar ( ).
•
•
•
To view the application type, version number, and the
supplier or manufacturer of the application, select
Options > View details.
To display the security certificate details of the
application, select Options > View certificate. See
‘Certificate management’, p. 112.
If you install a file that contains an update or repair to
an existing application, you can only restore the
original application if you have the original installation
file or a full back-up copy of the removed software
package. To restore the original application, remove the
application, and install the application again from the
original installation file or the back-up copy.
The .jar file is required for installing Java applications.
If it is missing, the device may ask you to download it.
If there is no access point defined for the application,
you are asked to select one. When you are downloading
Other applications and software suitable for the
Symbian operating system ( ). The installation files
have the .sis extension. Only install software
specifically designed for your Nokia device. Software
providers often refer to the official model number of
this product.
Installation files may be transferred to your device from a
compatible computer, downloaded during browsing, or
sent to you in a multimedia message, as an e-mail
attachment, or using Bluetooth connectivity or infrared.
You can use Nokia Application Installer in Nokia PC Suite
to install an application to your device. If you use
Microsoft Windows Explorer to transfer a file, save the file
to a memory card (local disk).
•
Download from Www.Somanuals.com. All Manuals Search And Download.
102
the .jar file, you may need to enter a user name and
password to access the server. You obtain these from
the supplier or manufacturer of the application.
log > Via text message or Via e-mail (available only if
the correct e-mail settings are in place).
Important: Your device can only support one
antivirus application. Having more than one application
with antivirus functionality could affect performance and
operation or cause the device to stop functioning.
1 To locate an installation file, press
, and select
Tools > App. mgr.. Alternatively, search the device
memory or a memory card (if inserted) in File mgr., or
open a message in Messag. > Inbox that contains an
installation file.
After you install applications to a compatible memory
card, installation files (.sis) remain in the device memory.
The files may use large amounts of memory and prevent
you from storing other files. To maintain sufficient
memory, use Nokia PC Suite to back up installation files to
a compatible PC, then use the file manager to remove the
installation files from the device memory. See ‘File
manager’, p. 21. If the .sis file is a message attachment,
delete the message from the Messaging inbox.
2 In App. mgr., select Options > Install. In other
applications, scroll to the installation file, and press
to start the installation.
During installation, the device shows information
about the progress of the installation. If you are
installing an application without a digital signature or
certification, the device displays a warning. Continue
installation only if you are sure of the origin and
contents of the application.
Remove applications and software
To start an installed application, locate it in the menu, and
press
.
Scroll to a software package, and select Options >
Remove. Select Yes to confirm.
To start a network connection and to view extra
information about the application, select Options > Go to
web address, if available.
If you remove software, you can only reinstall it if you
have the original software package or a full backup of the
removed software package. If you remove a software
package, you may no longer be able to open documents
created with that software.
To see what software packages are installed or removed
and when, select Options > View log.
To send your installation log to a help desk so that they can
see what is installed or removed, select Options > Send
If another software package depends on the software
package that you removed, the other software package
Download from Www.Somanuals.com. All Manuals Search And Download.
103
may stop working. Refer to the documentation of the
installed software package for details.
Invalid keys—View keys that are not valid; the time period
for using the media file is exceeded or there is a protected
media file in the device but no connected activation key.
Settings
Not in use—View keys that have no media files connected
to them in the device.
Select Options > Settings and from the following:
To buy more usage time or extend the usage period for a
media file, select an invalid activation key and Options >
Get activation key. Activation keys cannot be updated if
web service message reception is disabled. See ‘Web
service messages’, p. 48.
Online certif. check—Select to check the online
certificates before installing an application.
Default web address—Set the default address used when
checking online certificates.
Some Java applications may require a phone call, a
message to be sent, or a network connection to a specific
access point for downloading extra data or components.
In the App. mgr. main view, scroll to an application, and
select Options > Suite settings to change settings
related to that specific application.
To view detailed information, such as the validity status
and ability to send the file, scroll to an activation key, and
press
.
Activation keys for
copyright-protected files
To view the digital rights activation keys stored in your
device, press
the following:
, and select Tools > Actv. keys and from
Valid keys—View keys that are connected to one or more
media files and keys whose validity period has not started
yet.
Download from Www.Somanuals.com. All Manuals Search And Download.
104
Settings
To change settings, press
To open a settings group, press
want to change, and press
, and select Tools > Settings.
Writing language—Changing the language affects the
characters and special characters available when writing
text and the predictive text dictionary used.
. Scroll to a setting you
.
Some settings may be preset for the device by your service
provider, and you may not be able to change them.
Predictive text—Set the predictive text input On or Off
for all editors in the device. The predictive text dictionary
is not available for all languages.
Welcome note / logo—The welcome note or logo is
displayed briefly each time you switch on the device.
Select Default to use the default image, Text to write a
welcome note, or Image to select an image from Gallery.
Phone
General
Orig. phone settings—You can reset some of the settings
to their original values. To do this, you need the lock code.
See ‘Security’, ‘Phone and SIM’, p. 112. After resetting, the
device may take a longer time to power on. Documents
and files are unaffected.
Phone language—Changing the language of the display
texts in your device also affects the format used for date
and time and the separators used, for example, in
calculations. Automatic selects the language according to
the information on your SIM card. After you change the
display text language, the device restarts.
Standby mode
Changing the settings for Phone language or Writing
language affects every application in your device, and the
change remains effective until you change these settings
again.
Active standby—Use shortcuts to applications in the
standby mode. See ‘Active standby mode’, p. 100.
Left selection key—Assign a shortcut to the left selection
key (
) in the standby mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
105
Right selection key—Assign a shortcut to the right
selection key ( ) in the standby mode.
Colour scheme—Select a color scheme for the cover
display. To preview the selected color scheme, select
Options > Preview, and close the fold. To browse different
color schemes in the preview mode, scroll up or down using
the side scroll key.
Active standby apps.—Select the application shortcuts
you want to appear in the active standby. This setting is
only available if Active standby is on.
LED light—Select a color for the cover indicator. You can
choose different colors for missed calls and e-mails, and
unread messages. The setting for battery charging can be
either On or Off.
You can also assign keypad shortcuts for the different
presses of the center selection key. The center selection
key shortcuts are not available if the active standby is on.
Operator logo—This setting is only available if you have
received and saved an operator logo. Select Off if you do
not want the logo to be shown.
Closing animation—Select a short animation to play when
you close the cover.
Closing tone—Select a short tune to play when you close
the cover.
Display
Opening tone—Select a short tune to play when you open
Light sensor—Adjust the basic brightness level of the
display to lighter or darker. However, in extreme light
conditions, the brightness of the display is automatically
adjusted.
the cover and the device is in the standby mode.
Select Calls and from the following:
Answer if fold opened—Select No or Yes.
If fold closed—Select End call or Activate loudspeaker.
Power saver time-out—Select the time-out period after
which the screen saver is activated.
Light time-out—Select a time-out after which the
backlight of the display is switched off.
Call
Cover display
Select Personalisation and from the following:
Send my caller ID—Select Yes or No to set your phone
number to be seen by or hidden from the person to whom
you are calling. Otherwise, the value may be set by your
Download from Www.Somanuals.com. All Manuals Search And Download.
106
service provider when you make subscribe to the network
service. Set by network is displayed.
Anykey answer—Select On. To answer an incoming call,
briefly press any keypad key, except
.
,
,
, and
Call waiting—If you have activated call waiting (network
service), the network notifies you of a new incoming call
while you have a call in progress. To check whether the
function is active, select Check status. To set the function
on or off, select Activate or Cancel.
if the SIM card supports two subscriber numbers, that is,
two phone lines. Select which phone line you want to use
for making calls and sending text messages. Calls on both
lines can be answered irrespective of the selected line. If
you select Line 2 and have not subscribed to this network
service, you will not be able to make calls. When line 2 is
Reject call with SMS—Select Yes to send a text message
to a caller informing why you could not answer the call.
See ‘Answer or reject a call’, p. 64.
selected,
is shown in the standby mode.
Message text—Write text to be sent in a text message
when you reject a call.
Tip! To switch between the phone lines, press and
hold
in the standby mode.
Image in video call—Select a still image to be displayed
instead of video.
Line change—To prevent line selection (network service),
select Disable if supported by your SIM card. To change
this setting, you need the PIN2 code.
Automatic redial—Select On, and your device makes a
maximum of 10 attempts to connect the call after an
unsuccessful call attempt. To stop automatic redialing,
Connection
press
.
Summary after call—Activate this setting if you want the
device to briefly display the approximate duration of the
last call.
Data connections and access points
Your device supports packet data connections, such as
GPRS in the GSM network. When you use your device in
GSM and UMTS networks, multiple data connections can
Speed dialling—Select On, and the numbers assigned to
the speed dialing keys (
—
) can be dialed by
pressing and holding the key. See also ‘Speed dial a phone
number’, p. 59.
Download from Www.Somanuals.com. All Manuals Search And Download.
107
be active at the same time, and access points can share a
data connection.
indicates a packet data access point, and
wireless LAN access point.
a
You can also use a wireless LAN data connection. See
‘Wireless LAN’, p. 18. Only one connection in one wireless
LAN can be active at a time.
Tip! To create an IAP in a wireless LAN, press
, and
select Connect. > Conn. mgr. > Availab. WLAN >
Options > Define access point.
You can define different kinds of access points as follows: point. To edit the settings of an access point, select
To create a new access point, select Options > New access
Options > Edit. Follow the instructions from your service
provider.
•
•
•
MMS access point to send and receive multimedia
messages
Access point for the web application to view WML or
XHTML pages
IAP to send and receive e-mail and connect to the
internet
Connection name—Enter a descriptive name for the
connection.
Data bearer—Select the data connection type.
Depending on the data connection you select, only certain
setting fields are available. Fill in all fields marked with
Must be defined or with a red asterisk. Other fields can be
left empty, unless you have been instructed otherwise by
your service provider.
Check the type of access point you need with your service
provider for the service you want to access. For availability
and subscription to packet data connection services,
contact your service provider.
To be able to use a data connection, the network service
provider must support this feature, and if necessary,
activate it for your SIM card.
Access points
You may receive access point settings in a message from
a service provider. See ‘Data and settings’, p. 47. Some or
all access points may be preset for your device by your
network operator, and you may not be able to change,
Packet data
Follow the instructions from your service provider.
create, edit, or remove them.
access point.
indicates a protected
Access point name—You obtain the access point name
from your service provider.
Download from Www.Somanuals.com. All Manuals Search And Download.
108
User name—The user name may be needed to make a data
connection, and is usually provided by the service provider.
Proxy port number—Enter the proxy port number.
Wireless LAN
Prompt password—If you must enter the password every
time you log in to a server, or if you do not want to save
your password in the device, select Yes.
Follow the instructions from your service provider.
WLAN netw. name—Select Enter manuallyor Search for
netw.. If you select an existing network, WLAN netw.
mode and WLAN security mode are determined by the
settings of its access point device.
Password—A password may be needed to make a data
connection, and is usually provided by the service provider.
Authentication—Select Normal or Secure.
WLAN netw. mode—Select Ad-hoc to create an ad hoc
network and to allow devices to send and receive data
directly; a wireless LAN access point device is not needed.
Homepage—Depending on the access point you are setting
up, enter the web address or the address of the multimedia
messaging center.
WLAN security mode—Select the encryption used: WEP,
802.1x (not for ad hoc networks), or WPA/WPA2. If you
select Open network, no encryption is used. The WEP,
802.1x, and WPA functions can be used only if the
network supports them.
Select Options > Advanced settings to change the
following settings:
Network type—Select IPv4 settings or IPv6 settings. The
other settings depend on the selected network type.
WLAN security sett.—Enter the settings for the selected
security mode:
Phone IP address (for IPv4 only)—Enter the IP address of
your device.
Security settings for WEP are as follows:
DNS address—In Primary DNS address, enter the IP
address of the primary DNS server. In Secondary DNS
addr., enter the IP address of the secondary DNS server.
Contact your internet service provider to obtain these
addresses.
Wep key in use—Select the WEP key number. You can
create up to four WEP keys. The same settings must be
entered on the wireless LAN access point device.
Authentication type—Select Open or Shared for the
authentication type between your device and the wireless
LAN access point device.
Proxy serv. address—Define the address for the proxy
server.
Download from Www.Somanuals.com. All Manuals Search And Download.
109
WEP key settings—Enter WEP encryption (length of the
key), WEP key format (ASCII or Hexadecimal), and WEP
key (the WEP key data in the selected format).
IPv6 settings > DNS address—Select Automatic,
Well-known, or User defined.
Ad-hoc channel (only for Ad-hoc)—To enter a channel
number (1-11) manually, select User defined.
Security settings for 802.1x and WPA/WPA2 are as
follows:
Proxy serv. address—Enter the address for the proxy
server.
WPA mode—Select the means of authentication: EAP to
use an extensible authentication protocol (EAP) plug-in or
Pre-shared key to use a password. Complete the
appropriate settings:
Proxy port number—Enter the proxy port number.
Packet data
The packet data settings affect all access points using a
packet data connection.
EAP plug-in settings (only for EAP)—Enter the settings as
your service provider instructs.
Pre-shared key (only for Pre-shared key)—Enter a
password. The same password must be entered on the
wireless LAN access point device.
Packet data conn.—If you select When available and you
are in a network that supports packet data, the device
registers to the packet data network. Starting an active
packet data connection is quicker. If there is no packet
data coverage, the device periodically tries to establish a
packet data connection. If you select When needed, the
device uses a packet data connection only if you start an
application or action that needs it.
TKIP encryption—Select whether Temporal Key Integrity
Protocol (TKIP) is used.
Homepage—Define a home page.
Select Options > Advanced settings and from the
following:
Access point—The access point name is needed to use your
device as a packet data modem to your computer.
IPv4 settings: Phone IP address (the IP address of your
device), Subnet mask (the subnet IP address), Default
gateway (the gateway), and DNS address—Enter the IP
addresses of the primary and secondary DNS server.
Contact your internet service provider for these addresses.
Wireless LAN
Show availability—Select whether
a wireless LAN is available.
is displayed when
Download from Www.Somanuals.com. All Manuals Search And Download.
110
Scan for networks—If you set Show availability to Yes,
select how often the device searches for available wireless
LANs and updates the indicator.
Security
To view advanced settings, select Options > Advanced
settings. Changing wireless LAN advanced settings is not
recommended.
Phone and SIM
PIN code request—When active, the code is requested
each time the device is switched on. Deactivating the PIN
‘Glossary of PIN and lock codes’, p. 112.
Configurations
You may receive trusted server settings from your service
provider in a configuration message, or the settings may be
stored on your USIM card. You can save these settings to
your device, view, or delete them in Configs..
PIN code, PIN2 code, and Lock code—You can change the
lock, PIN, and PIN2 codes. These codes can only include
the numbers from 0 to 9. If you forget any of these codes,
contact your service provider. See ‘Glossary of PIN and
lock codes’, p. 112.
Date and time
Avoid using access codes similar to the emergency
numbers to prevent accidental dialing of the emergency
number.
See ‘Clock settings’, p. 17 and language settings in
‘General’, p. 105.
Autolock period—You can set an autolock period, a
time-out after which the device automatically locks. To
turn off the autolock period, select None.
To unlock the device, enter the lock code.
When the device is locked, calls may be possible to the
official emergency number programmed into your device.
Tip! To lock the device manually, press
. A list of
commands opens. Select Lock phone.
Download from Www.Somanuals.com. All Manuals Search And Download.
111
Lock if SIM changed—You can set the device to ask for
the lock code when an unknown SIM card is inserted into
your device. The device maintains a list of SIM cards that
are recognized as the owner’s cards.
PIN2 code—This code (4 to 8 digits) is supplied with some
SIM cards, and is required to access some functions in your
device.
Lock code (security code)—This code (5 digits) can be used
to lock the device to avoid unauthorized use. The factory
setting for the lock code is 12345. To avoid unauthorized
use of your device, change the lock code. Keep the new
code secret and in a safe place separate from your device.
If you forget the code, contact your service provider.
Closed user group—You can specify a group of people to
whom you can call and who can call you (network
service).
When calls are limited to closed user groups, calls may be
possible to the official emergency number programmed
into your device.
PUK and PUK2 codes—These codes (8 digits) are required to
change a blocked PIN code or PIN2 code, respectively. If
the codes are not supplied with the SIM card, contact the
operator whose SIM card is in your device.
Confirm SIM services—You can set the device to display
confirmation messages when you are using a SIM card
service (network service).
UPUK code—This code (8 digits) is required to change a
blocked UPIN code. If the code is not supplied with the
USIM card, contact the service provider whose USIM card
is in your device.
Glossary of PIN and lock codes
If you forget any of these codes, contact your service
provider.
PIN code—This code protects your SIM card against
unauthorized use. The PIN code (4 to 8 digits) is usually
supplied with the SIM card. After three consecutive
incorrect PIN code entries, the code is blocked, and you
need the PUK code to unblock it.
Certificate management
Digital certificates do not guarantee safety; they are used
to verify the origin of software.
In the certificate management main view, you can see a
list of authority certificates that are stored in your device.
UPIN code—This code may be supplied with the USIM
card. The USIM card is an enhanced version of the SIM
card and is supported by UMTS mobile phones.
Press
to see a list of personal certificates, if available.
Download from Www.Somanuals.com. All Manuals Search And Download.
112
Digital certificates should be used if you want to connect
to an online bank or another site or remote server for
actions that involve transferring confidential information.
They should also be used if you want to reduce the risk of
viruses or other malicious software and be sure of the
authenticity of software when downloading and installing
software.
To check certificate details, scroll to a certificate, and
select Options > Certificate details. When you open
certificate details, the validity of the certificate is checked,
and one of the following notes may be displayed:
Certificate not trusted—You have not set any application
to use the certificate. See ‘Change the trust settings’, p.
113.
Important: Even if the use of certificates makes the
risks involved in remote connections and software
installation considerably smaller, they must be used
correctly in order to benefit from increased security. The
existence of a certificate does not offer any protection by
itself; the certificate manager must contain correct,
authentic, or trusted certificates for increased security to
be available. Certificates have a restricted lifetime. If
Expired certificate or Certificate not valid yet is shown
even if the certificate should be valid, check that the
current date and time in your device are correct.
Expired certificate—The period of validity has ended for
the selected certificate.
Certificate not valid yet—The period of validity has not
yet begun for the selected certificate.
Certificate corrupted—The certificate cannot be used.
Contact the certificate issuer.
Change the trust settings
Before changing any certificate settings, you must make
sure that you really trust the owner of the certificate and
that the certificate really belongs to the listed owner.
View certificate details—check authenticity
Scroll to an authority certificate, and select Options >
Trust settings. Depending on the certificate, a list of the
applications that can use the selected certificate is shown.
For example:
You can only be sure of the correct identity of a server
when the signature and the period of validity of a server
certificate have been checked.
You are notified if the identity of the server is not
authentic or if you do not have the correct security
certificate in your device.
Symbian installation > Yes—The certificate is able to
certify the origin of a new Symbian operating system
application.
Download from Www.Somanuals.com. All Manuals Search And Download.
113
Internet > Yes—The certificate is able to certify servers.
To divert voice calls when your number is busy or when you
reject incoming calls, select If busy. To check whether the
option is activate, select Check status. To set the option on
or off, select Activate or Cancel.
App. installation > Yes—The certificate is able to certify
the origin of a new Java application.
Select Options > Edit trust setting to change the value.
Several diverting options can be active at the same time.
When all calls are diverted,
mode.
is shown in the standby
Track protected object
Some copyright-protected music files may include a
transaction identifier. Select whether you allow the
identifier to be sent with the music file if you send or
forward the file. The provider of the music file can use the
identifier to track the distribution of the files.
Call barring and call diverting cannot be active at the same
time.
Call barring
EAP plug-ins
Call barring (network service) allows you to restrict the
calls that you make or receive with the device. To change
the settings, you need the restriction password from your
service provider.
You can view the EAP plug-ins currently installed in your
device (network service). Some IAPs that use wireless LAN
as a data bearer and WPA security mode use the plug-ins
for authentication.
To set an option on or off, select Activate or Cancel. To
check whether the option is active, select Check status.
Call barring affects all calls, including data calls.
Call divert
Call barring and call diverting cannot be active at the same
time.
Call divert allows you to divert your incoming calls to
your voice mailbox or another phone number. For details,
contact your service provider.
When calls are barred, calls may be possible to the official
emergency number.
Download from Www.Somanuals.com. All Manuals Search And Download.
114
Cell info display—Select On to set the device to indicate
when it is used in a cellular network based on
microcellular network (MCN) technology and to activate
cell info reception.
Network
Your device can automatically switch between the GSM
and UMTS networks. The GSM network is indicated with
in the standby mode. The UMTS network is indicated
Enhancement
with
.
Network mode (shown only if supported by the
Select an enhancement and from the following:
operator)—Select which network to use. If you select Dual
mode, the device uses the GSM or UMTS network
automatically, according to the network parameters and
the roaming agreements between the wireless service
providers. Contact your network operator for more details.
Default profile—Set the profile that you want activated
each time you connect a certain enhancement to your
device. See ‘Profiles—set tones’, p. 98.
Automatic answer—Set if you want the device to answer
an incoming call automatically after 5 seconds. If the
ringing type is set to Beep once or Silent, automatic
answer is disabled. Automatic answer is not available for
Text phone.
Operator selection—Select Automatic to set the device to
search for and select one of the available networks, or
Manual to manually select the network from a list of
networks. If the connection to the manually selected
network is lost, the device sounds an error tone and asks
you to reselect a network. The selected network must have
a roaming agreement with your home network, that is, the
network used by the service provider whose SIM card is in
your device.
Lights (for car kit)—Set whether lights remain on or are
switched off after the time-out.
If you are using a Text phone, you must activate it on your
device. Press
, and select Tools > Settings >
Enhancement > Text phone > Use Text phone > Yes.
Glossary: A roaming agreement is an agreement
between two or more network service providers to
enable the users of one service provider to use the
services of other service providers.
Download from Www.Somanuals.com. All Manuals Search And Download.
115
Troubleshooting
other obstructions between the devices.
Check that the other device is not in the hidden mode.
Check that both devices are compatible.
Q&A
Access codes
Q: Why can’t I end a Bluetooth connection?
Q: What is my password for the lock, PIN, or PUK codes?
A: If another device is connected to your device, you can either
end the connection using the other device or by
deactivating Bluetooth connectivity. Select Connect. >
Bluetooth > Off.
A: The default lock code is 12345. If you forget or lose the
lock code, contact your device dealer.
If you forget or lose a PIN or PUK code, or if you have not
received such a code, contact your network service
provider.
For information about passwords, contact your access
point provider, for example, a commercial internet service
provider (ISP), wireless service provider, or network
operator.
Browser services
Q: What do I do if the following message is displayed: No valid
access point defined. Define one in Services settings.?
A: Insert the correct browser settings. Contact your service
provider for instructions.
Application not responding
Camera
Q: How do I close an application that is not responding?
A: To open the application switching window, press and hold
Q: Why do images look smudgy?
. Scroll to the application, and press
application.
to close the
A: Remove the protective plastic film covering the display and
camera. Ensure that the camera lens protection window is
clean.
Bluetooth connectivity
Q: Why is there audible noise from the camera when
Q: Why can’t I find my friend’s device?
autofocus or optical zoom is used?
A: Check that both devices have activated Bluetooth
connectivity.
A: Zoom and AF lens movement causes mechanical noise.
Select Options > Settings > Optical zoom during
Check that the distance between the two devices is not
over 10 meters (33 feet) and that there are no walls or
Download from Www.Somanuals.com. All Manuals Search And Download.
116
recording > Off to eliminate mechanical noise caused
by lens movement when recording.
Log
Q: Why does the log appear empty?
Q: Why do images or videos captured using night mode tend
to be noisier under dark lighting conditions compared to
normal mode?
A: You may have activated a filter, and no communication
events fitting that filter have been logged. To see all
events, select Applications > Log > Options > Filter > All
communication.
A: The output of the image sensor under the dark lighting
conditions is more amplified with night mode than with
normal mode to provide better brightness. In return, the
noise level on the image or video increases.
Memory low
Q: What can I do if my device memory is low?
A: You can delete the following items regularly to avoid
Q: Why do VGA video frames appear jagged when video
memory getting low:
stabilization is activated?
•
•
•
•
Messages from Inbox, Drafts, and Sent in Messag.
Retrieved e-mail messages from the device memory
Saved browser pages
A: Each video frame is enlarged from a smaller size within VGA
to the VGA size when video stabilization is activated. Due
to this, the quality within each frame is degraded
compared to video without stabilization mode.
Images and photos in Gallery
Display
To delete contact information, calendar notes, call timers, call
cost timers, game scores, or any other data, go to the
respective application to remove the data. If you are deleting
multiple items and one of the following notes are shown: Not
enough memory to perform operation. Delete some data
first. or Memory low. Delete some data., try deleting items
one by one (starting from the smallest item).
Q: Why do missing, discolored, or bright dots appear on the
screen every time I turn on my device?
A: This is a characteristic of this type of display. Some displays
may contain pixels or dots that remain on or off. This is
normal, not a fault.
Home network (UPnP)
Q: How can I save my data before deleting it?
Q: Why can’t I share files with other devices?
A: Save your data using one of the following methods:
A: Ensure that you have configured the home network
settings. Select Connect. > Home net. > Share content >
Content sharing, and the other device is UPnP compatible.
•
Use Nokia PC Suite to make a back-up copy of all data to
a compatible computer.
Download from Www.Somanuals.com. All Manuals Search And Download.
117
•
•
•
Send images to your e-mail address, then save the images
to your computer.
Send data using Bluetooth connectivity to a compatible
device.
Q: How can I end the data connection when the device starts
a data connection again and again?
A: To stop the device from making a data connection, select
Messaging and one of the following:
Store data on a compatible memory card.
On receiving msg. > Defer retrieval—to have the
multimedia messaging center save the message to be
retrieved later, for example, after you have checked the
settings. After this change, the device still needs to send
information notes to the network. To retrieve the message
now, select Retr. immediately.
On receiving msg. > Reject message—to reject all
incoming multimedia messages. After this change, the
device needs to send information notes to the network, and
the multimedia messaging center deletes multimedia
messages that are waiting to be sent to you.
Messaging
Q: Why can’t I select a contact?
A: The contact card does not have a phone number or an
e-mail address. Add the missing information to the
contact card in Contacts.
Multimedia messaging
Q: What should I do when the device cannot receive a
multimedia message because memory is full?
Multimedia recept. > Off—to ignore all incoming
multimedia messages. After this change, the device does
not make any network connections related to multimedia
messaging.
A: The amount of memory needed is indicated in the error
message: Not enough memory to retrieve message.
Delete some data first. To view what kind of data you
have and how much memory the different data groups
consume, select File manager > Options > Memory
details.
PC connectivity
Q: Why do I have problems connecting the device to my PC?
Q: The note Retrieving message is shown briefly. What is
A: Ensure that Nokia PC Suite is installed and running on your
PC. See the user guide for Nokia PC Suite on the DVD-ROM.
For further information on how to use Nokia PC Suite, see
the help function on Nokia PC Suite or visit the support
pages at www.nokia.com.
happening?
A: The device is trying to retrieve a multimedia message from
the multimedia messaging center.
Check that the settings for multimedia messaging are
defined correctly and that there are no mistakes in phone
numbers or addresses. Select Messag. > Options >
Settings > Multim. msg..
Download from Www.Somanuals.com. All Manuals Search And Download.
118
Wireless LAN
Q: Why can't I see a wireless LAN (WLAN) access point even
though I know I'm within its range?
A: The WLAN access point may use a hidden service set
identifier (SSID). You can only access networks that use a
hidden SSID if you know the correct SSID and have created
a WLAN IAP for the network on your Nokia device.
Q: How do I switch wireless LAN (WLAN) off on my Nokia
device?
A: You cannot switch off WLAN on your Nokia device. To
reduce battery consumption, you can specify that your
Nokia device does not scan for available networks.
To turn off the background scan:
1
Press
Wireless LAN.
, and select Tools > Settings > Connection >
2
3
Select Scan for networks > Never.
To save your changes, select Done.
When Scan for networks is set to Never, your Nokia device
still listens to available networks, and you can use available
WLAN networks as usual.
Download from Www.Somanuals.com. All Manuals Search And Download.
119
Battery information
terminals of the battery. (These look like metal strips on the
battery.) This might happen, for example, when you carry a
spare battery in your pocket or purse. Short-circuiting the
terminals may damage the battery or the connecting object.
Charging and discharging
Your device is powered by a rechargeable battery. The battery
can be charged and discharged hundreds of times, but it will
eventually wear out. When the talk and standby times are
noticeably shorter than normal, replace the battery. Use only
Nokia approved batteries, and recharge your battery only with
Nokia approved chargers designated for this device.
Leaving the battery in hot or cold places, such as in a closed
car in summer or winter conditions, will reduce the capacity
and lifetime of the battery. Always try to keep the battery
between 15°C and 25°C (59°F and 77°F). A device with a hot
or cold battery may not work temporarily, even when the
battery is fully charged. Battery performance is particularly
limited in temperatures well below freezing.
If a replacement battery is being used for the first time or if
the battery has not been used for a prolonged period, it may
be necessary to connect the charger, then disconnect and
reconnect it to begin charging the battery.
Do not dispose of batteries in a fire as they may explode.
Batteries may also explode if damaged. Dispose of batteries
according to local regulations. Please recycle when possible.
Do not dispose as household waste.
Unplug the charger from the electrical plug and the device
when not in use. Do not leave a fully charged battery
connected to a charger, since overcharging may shorten its
lifetime. If left unused, a fully charged battery will lose its
charge over time.
Do not dismantle or shred batteries. In the event of a battery
leak, do not allow the liquid to come in contact with the skin
or eyes. In the event of such a leak, flush your skin or eyes
immediately with water, or seek medical help.
If the battery is completely discharged, it may take several
minutes before the charging indicator appears on the display
or before any calls can be made.
Use the battery only for its intended purpose. Never use any
charger or battery that is damaged.
Nokia battery authentication
guidelines
Always use original Nokia batteries for your safety. To check
that you are getting an original Nokia battery, purchase it from
Do not short-circuit the battery. Accidental short-circuiting
can occur when a metallic object such as a coin, clip, or pen
causes direct connection of the positive (+) and negative (-)
Download from Www.Somanuals.com. All Manuals Search And Download.
120
an authorized Nokia dealer, look for the Nokia Original
Enhancements logo on the packaging, and inspect the
hologram label using the following steps:
3
4
Scratch the side of the label to
reveal a 20-digit code, for
example,
12345678919876543210. Turn
the battery so that the numbers
are facing upwards. The 20-digit
code reads starting from the
number at the top row followed
by the bottom row.
Successful completion of the four steps is not a total
assurance of the authenticity of the battery. If you have any
reason to believe that your battery is not an authentic, original
Nokia battery, you should refrain from using it, and take it to
the nearest authorized Nokia service point or dealer for
assistance. Your authorized Nokia service point or dealer will
inspect the battery for authenticity. If authenticity cannot be
verified, return the battery to the place of purchase.
Confirm that the 20-digit code is
valid by following the instructions
at www.nokia.com/batterycheck.
Authenticate hologram
1
When looking at the hologram on
the label, you should see the Nokia
connecting hands symbol from
one angle and the Nokia Original
Enhancements logo when looking
from another angle.
To create a text message, enter the
20-digit code, for example,
12345678919876543210, and send
to +44 7786 200276.
To create a text message,
•
For countries in Asia Pacific, excluding India: Enter the 20-
digit code, for example, 12345678919876543210, and
send to +61 427151515.
For India only: Enter Battery followed by the 20-digit
battery code, for example, Battery
2
When you angle the hologram
left, right, down, and up, you
should see 1, 2, 3, and 4 dots on
each side respectively.
•
12345678919876543210, and send to 5555.
National and international operator charges will apply.
You should receive a message indicating whether the code
can be authenticated.
Download from Www.Somanuals.com. All Manuals Search And Download.
121
What if your battery is not authentic?
If you cannot confirm that your Nokia battery with the
hologram on the label is an authentic Nokia battery, please do
not use the battery. Take it to the nearest authorized Nokia
service point or dealer for assistance. The use of a battery that
is not approved by the manufacturer may be dangerous and
may result in poor performance and damage to your device
and its enhancements. It may also invalidate any approval or
warranty applying to the device.
To find out more about original Nokia batteries, visit
www.nokia.com/battery.
Download from Www.Somanuals.com. All Manuals Search And Download.
122
Care and maintenance
Your device is a product of superior design and craftsmanship
and should be treated with care. The following suggestions
will help you protect your warranty coverage.
attachments could damage the device and may violate
regulations governing radio devices.
Use chargers indoors.
Always create a backup of data you want to keep, such as
contacts and calendar notes
To reset the device from time to time for optimum
performance, power off the device and remove the
battery.
•
•
•
Keep the device dry. Precipitation, humidity, and all types
of liquids or moisture can contain minerals that will
corrode electronic circuits. If your device does get wet,
remove the battery, and allow the device to dry completely
before replacing it.
•
•
•
Do not use or store the device in dusty, dirty areas. Its
moving parts and electronic components can be damaged.
Do not store the device in hot areas. High temperatures
can shorten the life of electronic devices, damage
batteries, and warp or melt certain plastics.
These suggestions apply equally to your device, battery,
charger, or any enhancement. If any device is not working
properly, take it to the nearest authorized service facility for
service.
•
Do not store the device in cold areas. When the device
returns to its normal temperature, moisture can form
inside the device and damage electronic circuit boards.
Do not attempt to open the device other than as instructed
in this guide.
Do not drop, knock, or shake the device. Rough handling
can break internal circuit boards and fine mechanics.
Do not use harsh chemicals, cleaning solvents, or strong
detergents to clean the device.
Do not paint the device. Paint can clog the moving parts
and prevent proper operation.
Use a soft, clean, dry cloth to clean any lenses, such as
camera, proximity sensor, and light sensor lenses.
Use only the supplied or an approved replacement
antenna. Unauthorized antennas, modifications, or
•
•
•
•
•
•
Download from Www.Somanuals.com. All Manuals Search And Download.
123
Additional safety information
Your device and its enhancements may contain small parts.
Keep them out of the reach of small children.
Medical devices
Operation of any radio transmitting equipment, including
wireless phones, may interfere with the functionality of
inadequately protected medical devices. Consult a physician or
the manufacturer of the medical device to determine if they
are adequately shielded from external RF energy or if you have
any questions. Switch off your device in health care facilities
when any regulations posted in these areas instruct you to do
so. Hospitals or health care facilities may be using equipment
that could be sensitive to external RF energy.
Operating environment
Remember to follow any special regulations in force in any
area, and always switch off your device when its use is
prohibited or when it may cause interference or danger. Use
the device only in its normal operating positions. This device
meets RF exposure guidelines when used either in the normal
use position against the ear or when positioned at least
1.5 centimeters (5/8 inch) away from the body. When a carry
case, belt clip, or holder is used for body-worn operation, it
should not contain metal and should position the device the
above-stated distance from your body.
Pacemakers
Pacemaker manufacturers recommend that a minimum
separation of 15.3 centimeters (6 inches) be maintained
between a wireless phone and a pacemaker to avoid potential
interference with the pacemaker. These recommendations are
consistent with the independent research by and
recommendations of Wireless Technology Research. Persons
with pacemakers should do the following:
To transmit data files or messages, this device requires a good
quality connection to the network. In some cases,
transmission of data files or messages may be delayed until
such a connection is available. Ensure the above separation
distance instructions are followed until the transmission is
completed.
•
Always keep the device more than 15.3 centimeters
(6 inches) from the pacemaker
Parts of the device are magnetic. Metallic materials may be
attracted to the device. Do not place credit cards or other
magnetic storage media near the device, because information
stored on them may be erased.
•
•
Do not carry the device in a breast pocket
Hold the device to the ear opposite the pacemaker to
minimize the potential for interference.
If you suspect interference, switch off your device, and move
the device away.
Download from Www.Somanuals.com. All Manuals Search And Download.
124
of the aircraft, disrupt the wireless telephone network, and
may be illegal.
Hearing aids
Some digital wireless devices may interfere with some hearing
aids. If interference occurs, consult your service provider.
Potentially explosive environments
Vehicles
Switch off your device when in any area with a potentially
explosive atmosphere, and obey all signs and instructions.
Potentially explosive atmospheres include areas where you
would normally be advised to turn off your vehicle engine.
Sparks in such areas could cause an explosion or fire resulting
in bodily injury or even death. Switch off the device at
refueling points such as near gas pumps at service stations.
Observe restrictions on the use of radio equipment in fuel
depots, storage, and distribution areas; chemical plants or
where blasting operations are in progress. Areas with a
potentially explosive atmosphere are often, but not always,
clearly marked. They include below deck on boats, chemical
transfer or storage facilities, vehicles using liquefied
petroleum gas (such as propane or butane), and areas where
the air contains chemicals or particles such as grain, dust, or
metal powders.
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles such as
electronic fuel injection systems, electronic antiskid (antilock)
braking systems, electronic speed control systems, and air bag
systems. For more information, check with the manufacturer,
or its representative of your vehicle, or any equipment that has
been added.
Only qualified personnel should service the device or install
the device in a vehicle. Faulty installation or service may be
dangerous and may invalidate any warranty that may apply to
the device. Check regularly that all wireless device equipment
in your vehicle is mounted and operating properly. Do not store
or carry flammable liquids, gases, or explosive materials in the
same compartment as the device, its parts, or enhancements.
For vehicles equipped with an air bag, remember that air bags
inflate with great force. Do not place objects, including
installed or portable wireless equipment in the area over the
air bag or in the air bag deployment area. If in-vehicle wireless
equipment is improperly installed and the air bag inflates,
serious injury could result.
Emergency calls
Important: Wireless phones, including this device,
operate using radio signals, wireless networks, landline
networks, and user-programmed functions. Because of this,
connections in all conditions cannot be guaranteed. You
should never rely solely on any wireless device for essential
communications like medical emergencies.
Using your device while flying in aircraft is prohibited. Switch
off your device before boarding an aircraft. The use of wireless
teledevices in an aircraft may be dangerous to the operation
Download from Www.Somanuals.com. All Manuals Search And Download.
125
ICNIRP and include safety margins designed to assure the
protection of all persons, regardless of age and health.
To make an emergency call:
1 If the device is not on, switch it on. Check for adequate
signal strength.
The exposure guidelines for mobile devices employ a unit of
measurement known as the Specific Absorption Rate or SAR.
The SAR limit stated in the ICNIRP guidelines is 2.0 watts/
kilogram (W/kg) averaged over 10 grams of tissue. Tests for
SAR are conducted using standard operating positions with
the device transmitting at its highest certified power level in
all tested frequency bands. The actual SAR level of an
operating device can be below the maximum value because
the device is designed to use only the power required to reach
the network. That amount changes depending on a number of
factors such as how close you are to a network base station.
The highest SAR value under the ICNIRP guidelines for use of
the device at the ear is 0.84 W/kg.
Some networks may require that a valid SIM card is
properly inserted in the device.
Press the end key as many times as needed to clear the
display and ready the device for calls.
Enter the official emergency number for your present
location. Emergency numbers vary by location.
Press the call key.
2
3
4
If certain features are in use, you may first need to turn those
features off before you can make an emergency call. If the
device is in the offline or flight profile mode, you may need to
change the profile to activate the phone function before you
can make an emergency call. Consult this guide or your
service provider for more information.
Use of device accessories and enhancements may result in
different SAR values. SAR values may vary depending on
national reporting and testing requirements and the network
band. Additional SAR information may be provided under
product information at www.nokia.com.
When making an emergency call, give all the necessary
information as accurately as possible. Your wireless device
may be the only means of communication at the scene of an
accident. Do not end the call until given permission to do so.
Certification information (SAR)
THIS MOBILE DEVICE MEETS GUIDELINES FOR EXPOSURE TO
RADIO WAVES.
Your mobile device is a radio transmitter and receiver. It is
designed not to exceed the limits for exposure to radio waves
recommended by international guidelines. These guidelines
were developed by the independent scientific organization
Download from Www.Somanuals.com. All Manuals Search And Download.
126
Index
received 65
settings for call diverting 114
transferring 65
storing DTMF tones 65
contact information 23
copying contacts 56
keys.
A
access points 107, 108
activation keys 104
additional applications 23
Adobe reader 96
alarm clock 17
camera
adjusting lighting and color 29
editing videos 32
flash 29
image setup settings 29
imaging mode 12
saving video clips 24
scenes 29
D
applications 102
data connections 92
ending 92
B
indicators 15
date 17
device manager 92
digital rights management. See
activation keys.
Download! 22
backing up 21
Bluetooth 83
device address 86
headset 115
pairing 86
self-timer 28
sequence mode 28
still image camera settings 27
video recorder settings 25
security 85
switching off 87
bookmarks 68
E
certificates 112
clear screen. See standby mode.
clock 17
editing videos 32, 33
e-mail 45
C
automatic retrieving 49
opening 49
remote mailbox 48
retrieving from mailbox 48
settings 52
cache, clearing 70
calendar 72
call register. See log.
calls
codes 111, 112
computer connections 83
conference call 58
connection settings 107
contact cards
dialed numbers 65
duration 66
international 58
viewing attachments 49
inserting pictures 55
sending 55
Download from Www.Somanuals.com. All Manuals Search And Download.
127
log 67
loopset settings 115
loudspeaker 17
F
P
file formats
packet data connections 110
PC connections 83
pdf files 96
personalization 100
phonebook. See contact cards.
PIN code 112
.jad, .jar, and .sis 102
RealPlayer 76
file manager 21
fixed dialing 56
FM radio 74
M
mailbox 48, 49
media files 76, 77
memory 22, 66
memory card 21
menu, rearranging 98
messaging
profiles 98
G
Q
gallery 31
backup files 41
ordering files in albums 36
presentations 35
TV out mode 35
Quickoffice 95
e-mail 45
R
multimedia messages 45
text messages 50
modem 93
modes 11, 12, 13
movies, muvees 78
multimedia messages 45
music player 37
transferring music 38
radio 74
remote mailbox 48
remote SIM mode 85
ringing tones
H
handsfree. See loudspeaker.
headset settings 115
help application 23
home network 19
personal ringing tone 57
receiving in a text message 47
S
I
security code. See lock code.
sending
N
IAP. See access points.
indicators 15
internet. See web.
Nokia PC Suite
contact and business cards 55
video clips 34
service commands 43
settings
calendar data 72
transferring music files to your
memory card 37
J
Java. See applications.
viewing device memory data 22
access codes 111
Bluetooth connectivity 84
calendar 73
L
O
lock code 112
office applications 95
Download from Www.Somanuals.com. All Manuals Search And Download.
128
call barring 114
call diverting 114
certificates 112
data connections 107
date and time 111
display 106
svg files 35
creating IAP 82, 92
synchronization 91
security 88
See also UPnP.
wizard 81
T
themes 100
language 105
lock code 112
time 17
transferring content 14
transferring music 38
original settings 105
personalizing the device 98
PIN code 112
screen saver 106
UPIN code 112
U
UPIN code 112
UPnP 19, 88
UPUK code 112
USSD commands 43
UPUK code 112
shortcuts 13
SIM card
copying names and numbers 56
messages 50
sis file 102
snooze 17
software 102
songs
V
video call 60, 64
video clips 31
video player. See RealPlayer.
Visual Radio 74, 75
voice commands 101
voice dialing 59
voice mailbox 58, 114
voice messages 58
voice tags 59, 101
volume control 17, 58
transferring 38
sound clips 31
sounds
muting a ringing tone 64
recording sounds 94
speed dialing 59
W
web 68
Download from Www.Somanuals.com. All Manuals Search And Download.
129
|