|
Nokia N93 User guide
9245183
ISSUE 2 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
BY USING THE APPLICATIONS YOU ACKNOWLEDGE THAT THE APPLICATIONS ARE
PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, TO THE
MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW. YOU FURTHER
ACKNOWLEDGE THAT NEITHER NOKIA NOR ITS AFFILIATES MAKE ANY
REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT
LIMITED TO WARRANTIES OF TITLE, MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, OR THAT THE APPLICATIONS WILL NOT INFRINGE ANY
THIRD-PARTY PATENTS, COPYRIGHTS, TRADEMARKS, OR OTHER RIGHTS.
Issue 2 EN, 9245183
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
For your safety...........................................7 Camera......................................................23
Record videos.......................................................................23
Take pictures ........................................................................25
Get connected..........................................10
Your Nokia N93.......................................11
Gallery.......................................................30
Modes..................................................................................... 11
View images and video clips............................................31
Shortcuts...............................................................................13
Edit video clips.....................................................................31
Settings.................................................................................. 14
Edit images ...........................................................................33
Transfer content from another device.......................... 14
Slide show.............................................................................33
Essential indicators.............................................................15
TV out mode .........................................................................34
Keypad lock (keyguard) ..................................................... 16
Presentations........................................................................34
Volume and loudspeaker control.................................... 16
Albums ...................................................................................35
Clock....................................................................................... 16
Print online ...........................................................................35
Headset.................................................................................. 17
Online sharing......................................................................36
Wrist and lens cover straps.............................................. 17
Wireless LAN ........................................................................ 17
Media applications..................................39
Home network ..................................................................... 19
Web browser ........................................................................ 19
Memory card........................................................................ 20
File manager......................................................................... 21
Help......................................................................................... 22
Tutorial................................................................................... 22
Music player.........................................................................39
Image print ...........................................................................42
Back up files.........................................................................43
Messaging.................................................44
Write text..............................................................................45
Write and send messages.................................................47
Download from Www.Somanuals.com. All Manuals Search And Download.
Inbox—receive messages...................................................49
Mailbox...................................................................................50
View messages on a SIM card .........................................52
Messaging settings .............................................................52
Calendar....................................................74
Create calendar entries .....................................................74
Meeting requests.................................................................74
Calendar views.....................................................................75
Manage your calendar entries.........................................75
Calendar settings ................................................................75
Make calls ............................................... 57
Voice calls..............................................................................57
Video calls..............................................................................59
Video sharing........................................................................60
Answer or reject a call.......................................................63
Log...........................................................................................64
My own.....................................................76
Visual Radio .........................................................................76
RealPlayer..............................................................................78
Flash Player...........................................................................80
Movie director......................................................................81
Games.....................................................................................82
Contacts (phonebook)............................ 67
Save names and numbers .................................................67
Copy contacts.......................................................................68
Add ringing tones for contacts........................................69
Create contact groups........................................................69
Connectivity.............................................83
PC connections ....................................................................83
Data cable.............................................................................83
Bluetooth connectivity......................................................83
Infrared connection............................................................87
Home network......................................................................88
Synchronization...................................................................91
Connection manager..........................................................91
Device manager...................................................................92
Modem ..................................................................................93
Services.................................................... 70
Web access point.................................................................70
Bookmarks view...................................................................70
Connection security............................................................71
Browse....................................................................................71
Download and purchase items ........................................72
End a connection.................................................................72
Web settings.........................................................................73
Office........................................................94
Download from Www.Somanuals.com. All Manuals Search And Download.
Recorder................................................................................. 94 TV configuration................................................................114
Converter............................................................................... 94 Voice commands ...............................................................114
Calculator.............................................................................. 94 Application manager........................................................114
Notes ...................................................................................... 95 Activation keys for copyright-protected files...........117
Zip manager.......................................................................... 95
Troubleshooting.................................... 118
Q&A.......................................................................................118
Quickoffice............................................................................ 95
Adobe reader........................................................................ 97
Barcode reader..................................................................... 98
Battery information ............................. 122
Charging and discharging...............................................122
Personalize your device........................ 100
Profiles—set tones.............................................................100
Nokia battery authentication guidelines ...................122
Change the look of your device....................................101
Active standby mode........................................................102
Care and maintenance......................... 125
Additional safety information............. 126
Tools....................................................... 103
Multimedia key..................................................................103
Settings................................................................................103
Index...................................................... 129
Download from Www.Somanuals.com. All Manuals Search And Download.
For your safety
Read these simple guidelines. Not following them may be
dangerous or illegal. Read the complete user guide for
further information.
SWITCH OFF WHEN REFUELING Do not use
the device at a refueling point. Do not use near
fuel or chemicals.
SWITCH ON SAFELY Do not switch the device
on when wireless phone use is prohibited or
when it may cause interference or danger.
SWITCH OFF NEAR BLASTING Follow any
restrictions. Do not use the device where
blasting is in progress.
ROAD SAFETY COMES FIRST Obey all local
laws. Always keep your hands free to operate
the vehicle while driving. Your first
consideration while driving should be road
safety.
USE SENSIBLY Use only in the normal
position as explained in the product
documentation. Do not touch the antenna
unnecessarily.
QUALIFIED SERVICE Only qualifiedpersonnel
may install or repair this product.
INTERFERENCE All wireless devices may be
susceptible to interference, which could affect
performance.
ENHANCEMENTS AND BATTERIES Use only
approved enhancements and batteries. Do not
connect incompatible products.
SWITCH OFF IN HOSPITALS Follow any
restrictions. Switch the device off near medical
equipment.
WATER-RESISTANCE Your device is not
water-resistant. Keep it dry.
SWITCH OFF IN AIRCRAFT Follow any
restrictions. Wireless devices can cause
interference in aircraft.
BACK-UP COPIES Remember to make
back-up copies or keep a written record of all
important information stored in your device.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
CONNECTING TO OTHER DEVICES When
connecting to any other device, read its user
guide for detailed safety instructions. Do not
connect incompatible products.
Your device supports internet connections and other
methods of connectivity. Like computers, your device may
be exposed to viruses, malicious messages and
applications, and other harmful content. Exercise caution
and open messages, accept connectivity requests,
download content, and accept installations only from
trustworthy sources. To increase the security of your
device, consider installing antivirus software with a regular
update service and using a firewall application.
EMERGENCY CALLS Ensure the phone
function of the device is switched on and in
service. The keypad is active only in the
fold-open mode. Press the end key as many
times as needed to clear the display and return
to the standby mode. Enter the emergency
number, then press the call key. Give your
location. Do not end the call until given
permission to do so.
Warning: To use any features in this device, other
than the alarm clock, the device must be switched on.
Do not switch the device on when wireless device use
may cause interference or danger.
This device supports common features of Microsoft Word,
PowerPoint, and Excel (Microsoft Office 97, 2000, XP, and
2003). Not all file formats can be viewed or modified.
About your device
The wireless device described in this guide is approved for
use on the EGSM 900, 1800, 1900, and UMTS 2100
networks. Contact your service provider for more
information about networks.
During operation, such as an active video sharing session
or high-speed data connection, the device may feel warm.
In most cases, this condition is normal. If you suspect the
device is not working properly, take it to the nearest
authorized service facility.
When using the features in this device, obey all laws and
respect local customs, privacy and legitimate rights of
others, including copyrights.
Your device may have some bookmarks or links preinstalled
for or may allow access to sites provided by third parties
not affiliated with Nokia. Nokia does not endorse or
assume any liability for these sites. If you choose to access
Copyright protections may prevent some images, music
(including ringing tones), and other content from being
copied, modified, transferred, or forwarded.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
them, you should take the same precautions, for security or
content, as you would with any internet site.
For availability and information on using SIM card
services, contact your SIM card vendor. This may be the
service provider or other vendor.
Network services
Enhancements, batteries, and
chargers
Always switch the device off and disconnect the charger
before removing the battery.
To use the phone you must have service from a wireless
service provider. Many of the features require special
network features. These features are not be available on all
networks; other networks may require that you make
specific arrangements with your service provider before
you can use the network services. Your service provider can
give you instructions and explain what charges will apply.
Some networks may have limitations that affect how you
can use network services. For instance, some networks may
not support all language-dependent characters and
services.
Check the model number of any charger before use with
this device. This device is intended for use when supplied
with power from a DC-4, AC-3, or AC-4 charger, and from
an AC-1, ACP-7, ACP-8, ACP-9, ACP-12, LCH-8, LCH-9, or
LCH-12 charger when used with the CA-44 charger
adapter.
Your service provider may have requested that certain
features be disabled or not activated in your device. If so,
these features will not appear on your device menu. Your
device may also have a special configuration such as
changes in menu names, menu order, and icons. Contact
your service provider for more information.
The battery intended for use with this device is BP-6M.
Warning: Use only batteries, chargers, and
enhancements approved by Nokia for use with this
particular model. The use of any other types may
invalidate any approval or warranty, and may be
dangerous.
This device supports WAP 2.0 protocols (HTTP and SSL) that
run on TCP/IP protocols. Some features of this device, such
as MMS, browsing, e-mail, and content downloading using
the browser or over MMS, require network support for
these technologies.
For availability of approved enhancements, please check
with your dealer. When you disconnect the power cord of
any enhancement, grasp and pull the plug, not the cord.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Get connected
Use your device on the 2G and 3G networks. See ‘Your
Nokia N93’ p.11
Use Bluetooth technology, for example, to transfer files
and connect to compatible enhancements. See ‘Bluetooth
connectivity’ p. 83.
Use infrared to transfer and synchronize data between
compatible devices, for example. See ‘Infrared connection’
p. 87.
Use a wireless LAN to connect to the internet and WLAN
enabled devices. See ‘Wireless LAN’ p. 92.
Use Nokia Connectivity Cable CA-53 to connect to
compatible devices, such as printers and PCs. See ‘Data
cable’ p. 83. Use Nokia Video Cable CA-64U to connect to
a compatible TV. See ‘TV configuration’ p. 114.
Use a compatible microSD card to transfer data or back up
information, for example. See ‘Memory card tool’ p. 20.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Your Nokia N93
Model number: Nokia N93-1
In the fold-closed mode, the cover display provides clock
and status information. On the standby mode display, the
signal strength and battery indicators, time information,
status indicators, and the name of the active profile (if
other than General) may be shown. If you use the music
player to listen to a sound clip, volume bars and track
information are displayed. Use the side scroll keys to play,
pause, play the next or previous sound clip, and turn the
volume up or down.
Hereinafter referred to as Nokia N93.
Modes
Your device has four mechanical modes that are optimized
for different uses: fold closed for carrying, fold open for
traditional mobile phone use, image for recording video
and taking pictures, and view for viewing your images and
videos. To switch between the modes, turn the fold and the
swing axis display. There is a short time-out before a mode
is activated.
If you are using Visual Radio in the fold-closed mode, the
visual content is not shown on the cover display. You can
store several preset stations with station name, frequency,
and location information. This information is shown on
the cover display. To turn the audio on and off, change the
channel, and seek new channels, use the scroll key on the
side of the device.
Fold-closed mode
When the fold is closed, the main display
deactivates and the cover display lights
up. Ongoing calls end, unless the
loudspeaker is in use or a compatible
headset is connected. To change the
settings, see ‘Cover display’, p. 104. If you
are using the player to listen to a sound
clip, it continues to play.
Calendar and clock alarms and notes for missed calls and
new received messages are also displayed. To view
received text messages and the text and image objects of
received multimedia messages, open the fold, and view
the message on the main display.
Incoming calls are indicated by their normal tone and a
note. In the cover display settings, select Answer if fold
opened to answer a call when you open the fold. If a
Download from Www.Somanuals.com. All Manuals Search And Download.
11
compatible headset is connected to the device, press the
‘Cover display’, p. 104.
opens about 160 degrees, as shown in the picture. Do not
force the fold to open more.
Image mode
To make calls or use the menu, open the fold.
When you open the fold to
90 degrees, hold the device
sideways, turn the fold
down so that the main
display faces you, and the
image mode is activated.
The main camera is
To use the flash as a flashlight, press the flash key on the
following:
•
Quickly press the flash key once. The flashlight is
activated for 1.5 seconds.
•
Quickly press the flash key twice. The flashlight is
activated for 3 minutes or until you press the flash key
again.
activated, and you can see
the image to be captured.
•
Press and hold the flash key. The flashlight is activated
and stays on for as long as you hold the key or until the
3-minute time-out ends.
In image mode, you can
record videos and take pictures. See ‘Camera’, p. 23.
In image mode, the numeric keypad is not active. You can
use the capture key, zoom key, side scroll key, camera
mode key, and flash key (all located on the side of the
device), power key, and the landscape selection keys next
to the main display.
Fold-open mode
When you open the fold, the
fold-open mode is activated
automatically: the main
display lights up, the keypad is
available, and you can access
the menu. Scroll in the menu.
View mode
When the fold is closed and you lift the side of the swing
axis display when the fold is closed, the view mode is
activated.
The fold-open mode is
activated even if the fold is
not fully opened. The fold
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Use the view mode to do
the following:
To start the camera, fully press the capture key in image
mode.
•
•
View your images.
Activate photos and
movies from the
gallery to watch
slideshows.
To call your voice mailbox (network service), press and
hold
.
To open multimedia applications, press and hold
‘Multimedia key’, p. 103.
. See
•
Make hands-free
To change the profile, press
, and select a profile.
video calls, and send
live video during a
video call. Adjust the angle of the display for optimum
secondary camera angle.
To switch between General and Silent, press and hold
. If you have two phone lines, this action switches
between the two lines.
To open the last dialed numbers list, press
To use voice commands, press and hold
.
.
Shortcuts
Use shortcuts to quickly get the most from your device.
Refer to the relevant sections in this user guide for further
details of the functions.
To start a connection to Services, press and hold
‘Services’, p. 70.
. See
For other shortcuts available in the standby mode, see
‘Active standby mode’, p. 102.
Standby mode
Edit text and lists
To switch between applications that are open, press and
hold , and select an application. If memory is low, the
device may close some applications. The device saves any
unsaved data before closing an application.
To mark an item in a list, scroll to it, and press
at the same time.
and
while
To mark multiple items in a list, press and hold
you press
.
or . To end the selection, release , then
Leaving applications running in the background increases
the demand on battery power and reduces the battery life.
Download from Www.Somanuals.com. All Manuals Search And Download.
13
To select letters and words, press and hold
same time, press or to highlight text. To copy the
text to clipboard, while still holding , select Copy. To
. At the
Transfer content
1 Press , and select Tools > Transfer.
2 In the information view, select Continue.
3 Select whether you want to use Bluetooth connectivity
or infrared to transfer the data. Both devices must
support the selected connection type.
insert the text into a document, press and hold
, and
select Paste.
4 If you select Bluetooth connectivity, to have your Nokia
device search for devices with Bluetooth connectivity,
select Continue. Select the other device from the list.
You are asked to enter a code on your Nokia device.
Enter a code (1-16 digits), and select OK. Enter the
same code on the other device, and select OK. The
devices are now paired. See ‘Pair devices’, p. 86.
For some phone models, Transfer is sent to the other
device as a message. To install Transfer on the other
device, open the message, and follow the instructions
on the display.
Settings
Your Nokia device normally has MMS, GPRS, streaming,
and mobile internet settings automatically configured,
based upon your service provider information. You may
have settings from your service provider already installed
in your device, or you may receive the settings from the
service provider as a special text message.
Transfer content from
another device
If you select infrared, connect the two devices. See
‘Infrared connection’, p. 87.
You can copy content such as contacts and calendar
entries from a compatible Nokia device to your Nokia
device using Bluetooth connectivity or infrared. The type
of content that can be copied depends on the phone
model.
5 From your Nokia device, select the content you want to
copy from the other device.
Content is copied from the memory and compatible
memory card (if inserted) of the other device to the
corresponding location in your Nokia device and memory
card (if inserted). The copying time depends on the amount
of data to be transferred. You can cancel copying and
continue later.
You can insert your SIM card in the other device. When
your Nokia device is switched on without a SIM card, the
offline profile is automatically activated.
Download from Www.Somanuals.com. All Manuals Search And Download.
14
To view the log information of a previous transfer, in the
All calls to the device are forwarded to another
main view, select Transfer log.
number. If you have two phone lines (network service), the
indicator for the first line is
.
and for the second
To view the devices you have copied or transferred data
from, in the main view, select Phones.
A compatible headset is connected to the device.
A compatible loopset is connected to the device.
A compatible text phone is connected to the device.
A data call is active.
Essential indicators
The device is being used in a GSM network.
The device is being used in a UMTS network (network
service).
A GPRS or EDGE packet data connection is available.
A GPRS or EDGE packet data connection is active.
A GPRS or EDGE packet data connection is on hold.
A UMTS packet data connection is available.
A UMTS packet data connection is active.
A UMTS packet data connection is on hold.
You have one or more unread messages in the Inbox
folder in Messag..
You have received new e-mail in the remote mailbox.
There are messages waiting to be sent in the Outbox
folder.
You have missed calls.
You have set the device to scan for wireless LANs, and
a wireless LAN is available. See ‘Wireless LAN’, p. 109.
Shown if Ringing type is set to Silent and Message
alert tone, IM alert tone, and E-mail alert tone are set
to Off.
A wireless LAN connection is active in a network
that has encryption.
The device keypad is locked.
A wireless LAN connection is active in a network that
does not have encryption.
A clock alarm is active.
The second phone line is being used (network service).
Bluetooth connectivity is on.
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Data is being transmitted using Bluetooth
connectivity.
The built-in loudspeaker allows you to speak and listen
from a short distance without having to hold the device to
your ear.
A USB connection is active.
Warning: Do not hold the device near your ear when
the loudspeaker is in use, because the volume may be
extremely loud.
An infrared connection is active. If the indicator is
blinking, the device is trying to connect to the other
device or the connection has been lost.
To use the loudspeaker during a call, select Options >
Activate loudsp..
Keypad lock (keyguard)
Use the keypad lock to prevent accidental keypresses.
To turn off the loudspeaker, select Options > Activate
handset.
To turn on the display light when the keypad lock is on,
press
.
Clock
•
To lock, press
locked,
, then
. When the keys are
is shown on the display.
•
•
To unlock with the fold-open, press
To unlock with the fold-closed, press and hold the
camera mode key.
, then
.
Select Clock application. To set a new alarm, select
Options > Set alarm. When an alarm is active,
is
shown.
When the keypad lock is on, calls may be possible to the
official emergency number programmed into your device.
To turn off the alarm, select Stop, or to stop the alarm for
5 minutes, select Snooze.
If the alarm time is reached while the device is switched
off, the device switches itself on and starts sounding the
alarm tone. If you select Stop, the device asks whether you
want to activate the device for calls. Select No to switch
off the device or Yes to make and receive calls. Do not
Volume and loudspeaker control
To increase or decrease the
volume level when you have
an active call or are listening
to a sound, press
or
.
Download from Www.Somanuals.com. All Manuals Search And Download.
16
select Yes when wireless phone use may cause
clock main view, and the time in your device is changed
according to the city selected. Check that the time is
correct and matches your time zone.
interference or danger.
To cancel an alarm, select Clock > Options > Remove
alarm.
Headset
Clock settings
To change the clock settings, select Clock > Options >
Settings.
Connect a compatible
headset to the Pop-PortTM
connector of your device.
To change the time or date, select Time or Date.
Warning: When
you use the headset, your
To change the clock shown in the standby mode, select
Clock type > Analogue or Digital.
ability to hear outside
sounds may be affected.
Do not use the headset where it can endanger your safety.
To allow the mobile phone network to update the time,
date, and time zone information to your device (network
service), select Network operator time > Auto-update.
Wrist and lens cover straps
Thread the
straps as
shown, and
tighten them.
To change the alarm tone, select Clock alarm tone.
World clock
To open the world clock view, open Clock, and press . In
the world clock view, you can view the time in different
cities.
To add cities to the list, select Options > Add city. You can
add a maximum of 15 cities to the list.
Wireless LAN
Your device supports wireless local area network
(wireless LAN). With wireless LAN, you can
To set your current city, scroll to a city, and select
Options > My current city. The city is displayed in the
Download from Www.Somanuals.com. All Manuals Search And Download.
17
connect your device to the internet and compatible
devices that have wireless LAN. For information about
using your device in a home network, see ‘Home network’,
p. 19.
‘Wireless LAN access points’ in the Additional applications
guide.
Important: Always enable one of the available
encryption methods to increase the security of your
wireless LAN connection. Using encryption reduces the risk
of unauthorized access to your data.
To use wireless LAN, a wireless LAN must be avilable in the
location, and your device must be connected to the
wireless LAN.
A wireless LAN connection is established when you create
a data connection using a wireless LAN Internet access
point. The active wireless LAN connection ends when you
end the data connection. To end the connection, see
‘Connection manager’, p. 91.
Some places, like France, have restrictions on the use of
wireless LAN. Check with your local authorities for more
information.
Features using wireless LAN, or allowing such features to
run in the background while using other features, increase
You can use wireless LAN during a voice call or when
the demand on battery power and reduce the battery life. packet data is active. You can only be connected to one
wireless LAN access point device at a time, but several
applications can use the same wireless LAN connection.
Your device supports the following wireless LAN features:
•
•
•
IEEE 802.11b/g standard
Operation at a frequency of 2.4 GHz
Wired equivalent privacy (WEP) with keys up to 128
bits, Wi-Fi protected access (WPA), and 802.1x
encryption methods. These functions can be used only
if they are supported by the network.
When you activate Offline, you can still use wireless LAN
(if available). Remember to comply with any applicable
safety requirements when establishing and using a
wireless LAN connection.
Tip! To check the unique media access control (MAC)
address that identifies your device, enter *#62209526#
in the standby mode.
Wireless LAN connections
For information about WLAN wizard, see ‘WLAN wizard’ in
the Additional applications guide.
To use wireless LAN, you must create an internet access
point (IAP) in a wireless LAN. Use the access point for
applications that need to connect to the internet. See
Download from Www.Somanuals.com. All Manuals Search And Download.
18
Home network
Your device is compatible with UPnP. With a wireless LAN
access point device, you can create a home network and
connect compatible UPnP devices that support wireless
LAN to the network, such as your Nokia device, a
compatible PC, a compatible printer, and a compatible
sound system or a TV, or a sound system or TV equipped
with a compatible wireless multimedia receiver.
Various service providers maintain pages specifically
designed for mobile devices. These pages use the wireless
markup language (WML), extensible hypertext markup
language (XHTML), or hypertext markup language (HTML).
your service provider. Service providers will also give you
instructions on how to use their services.
After you have configured the home network, you can
copy, view, or play compatible media files and print images
in Gallery on the other connected compatible devices, for
example, view images stored on your Nokia device on a
compatible TV. See ‘Home network’, p. 88 and ‘Image print’,
p. 42.
Press
, and select Internet > Web.
With this additional browser, you are able to view normal
web pages, to zoom in and out on a page (Mini Map), to
view web pages that contain only text in narrow form so
that text wraps, and to read feeds and blogs.
To set up home networking in your wireless LAN, first
create and configure your wireless LAN home Internet
access point, then configure the devices. On your Nokia
device, configure the settings in Home net. . To connect a
compatible PC to the home network, on the PC, you must
install the Media Server software from the DVD-ROM
supplied with your Nokia device.
To turn the Mini Map on or off for the current page,
press
. When the Mini Map is on, an overview of the
complete page is shown when you scroll on the page.
See also ‘Web access point’, p. 70.
After you have completed the necessary configurations in
all devices connected to the network, you can start using
Home net. to share your media files. See ‘View media files’,
p. 90.
Download from Www.Somanuals.com. All Manuals Search And Download.
19
3 Push the card in. You hear a click
when the card locks into place.
4 Close the door.
Eject the memory card
Memory card
You can use a compatible miniSD card as
extra storage space to save the memory
on your device. You can also back up
information from your device to the
memory card.
1 Before you eject the card, press
, and select Remove mem.
card. All applications are closed.
2 When Remove memory card and press 'OK' is
displayed, swing open the door of the memory card slot.
3 Press the memory card to release it from the slot.
4 Remove the memory card. If the device is switched on,
select OK when prompted to confirm the removal.
Important: Do not remove the memory card in the
middle of an operation when the card is being accessed.
Removing the card in the middle of an operation may
damage the memory card as well as the device, and data
stored on the card may be corrupted.
Use only compatible miniSD cards with this device. Other
memory cards, such as Reduced Size MultiMediaCards, do
not fit in the memory card slot and are not compatible
with this device. Using an incompatible memory card may
damage the memory card as well as the device, and data
stored on the incompatible card may be corrupted.
Keep all memory cards out of the reach of small children.
Insert the memory card
1 To open the door of the
memory card slot,
swing it upwards in a
counterclockwise
Memory card tool
direction.
2 Insert the memory
card in the slot. Ensure
that the contact area
on the card is facing
up.
Press , and select Tools > Memory. You can use a
compatible miniSD card as extra storage space and for
backing up the information in the device memory.
To back up information from the device memory to a
memory card, select Options > Backup phone mem.
Download from Www.Somanuals.com. All Manuals Search And Download.
20
To restore information from the memory card to the device
memory, select Options > Restore from card.
You can use a compatible miniSD card as extra storage
space. Memory cards are rewritable, so you can delete old
information and save new data on a memory card.
Format a memory card
When a memory card is reformatted, all data on the card
is permanently lost.
To browse files and folders in the device memory or on a
memory card (if inserted), press , and select Tools > File
mgr.. The device memory view (
open the memory card view (
) opens. Press
) (if available).
to
Some memory cards are supplied preformatted and others
require formatting. Consult your retailer to find out if you
must format the memory card before you can use it.
To move or copy files to a folder, press
and
at the
same time to mark a file, and select Options > Move to
folder or Copy to folder.
To format a memory card, select Options > Format mem.
card. Select Yes to confirm.
To find a file, select Options > Find and the memory from
which to search, and enter a search text that matches the
file name.
Tip! For optimal performance, use your Nokia device
to format all new miniSD cards.
View memory consumption
To view what types of data you have in the device and how
much memory the different data types consume, select
Options > Memory details. The amount of available
memory is shown in Free memory.
File manager
Many features of the device, such as contacts, messages,
images, videos, ringing tones, calendar notes, documents,
and downloaded applications, use memory to store data.
The free memory available depends on how much data is
already saved in the device memory.
Memory low—free memory
The device notifies you if the device or the memory card
memory is low.
Download from Www.Somanuals.com. All Manuals Search And Download.
21
To free device memory, transfer data to a compatible
memory card, if you have one. Mark files to be moved, and
select Move to folder > Memory card and a folder.
memory, use Nokia PC Suite to back up installation files to
a compatible PC, then use the file manager to remove the
a message attachment, delete the message from the
Messaging inbox
You can also transfer media files to a compatible PC, for
files’, p. 43.
Help
Tip! Use Nokia Phone Browser in Nokia PC Suite to
view the different memories in your device and
transfer data.
Your device has context-sensitive help. When an
application is open, select Options > Help to access help
for the current view.
To remove data to free memory, use File mgr. or the
respective application. For example, you can remove the
following:
When you are reading the instructions, to switch between
help and the application that is open in the background,
•
Messages from the Inbox, Drafts, and Sent folders in
Messag.
press and hold
.
•
•
•
•
•
•
Retrieved e-mail messages from the device memory
Saved web pages
Saved images, videos, or sound files
Contact information
Calendar notes
Downloaded applications. See also ‘Application
manager’, p. 114.
To open help from the main menu, select Tools > Help.
Select the desired application to view its help topics.
Tutorial
•
Any other data that you no longer need
The tutorial gives you information about some of the
features of your device. To access the tutorial in the menu,
press , and select My own > Tutorial and the section
you want to view.
After you install applications to a compatible memory
card, installation files (.sis) remain in the device memory.
The files may use large amounts of memory and prevent
you from storing other files. To maintain sufficient
Download from Www.Somanuals.com. All Manuals Search And Download.
22
Camera
Your Nokia N93 has two cameras, a high-resolution
camera on the side of the device (the main camera) and a
lower-resolution camera on the top of the main display
(the secondary camera). You can use both cameras to take
still images and record video in the portrait and landscape
views.
mode key, or select Options > Switch to video mode to
switch to video mode.
Press the capture key to start recording. The record icon
is displayed and a tone sounds. The red recording
indicator is lit, indicating that video is being recorded.
1 To stop recording at any time, press the capture key.
2 To pause the recording, select Pause; to resume
recording, select Continue.
The Nokia N93 device supports an image capture
resolution of 2048x1536 pixels using the main camera. The
image resolution in these materials may appear different.
The video clip is automatically saved to Images &
video in Gallery. See ‘Gallery’, p. 30.
The images and video clips are automatically saved in the
Images & video folder in Gallery. The cameras produce
.jpg images. Video clips are recorded in the .mp4 file format
or in the 3GPP file format with the .3gp file extension
(Sharing modes). See ‘Video settings’, p. 24.
To make lighting and color adjustments before recording
a video in the imaging mode, scroll through the toolbar.
See ‘Setup settings—adjust color and lighting’, p. 28 and
‘Shooting modes’, p. 28.
You can send images and video clips in a multimedia
message as an e-mail attachment or by using Bluetooth
connectivity.
To zoom in or out of the subject (continuous 3x optical
and up to 20x digital zoom), rotate the zoom key on the
side of the device.
The video viewfinder displays the following:
Record videos
To activate the main camera rotate the display to image
mode. If the camera is in image mode, use the camera
Download from Www.Somanuals.com. All Manuals Search And Download.
23
•
Status
After you record a video clip, select the following from the
toolbar:
Exit
indicators (1)
for audio mute
on,
stabilization
on, video light
mode, and the
current
capture mode.
The toolbar (2),
which you can
scroll through before recording to select the shooting
mode, white balance, and color tone (the toolbar is not
displayed during recording).
The total available video recording time (3). When you
are recording, the current video length indicator also
shows the elapsed time and time remaining.
The device memory ( ) and memory card (
indicators (4) show where videos are saved.
The video quality indicator (5) indicates whether the
quality of the video is TV (high), TV (normal),
Handset (high), Handset (normal), or Sharing.
The video clip file type (6).
•
To immediately play the video clip you just recorded,
select Play.
•
•
If you do not want to keep the video, select Delete.
To send the video using multimedia, e-mail, Bluetooth
connectivity, or infrared, press
, or select Send. For
more information, see ‘Messaging’, p. 44 and
‘Bluetooth connectivity’, p. 83. This option is not
available during an active call. You cannot send video
clips saved in the .mp4 file format in a multimedia
message.
Options
•
•
•
To record a new video clip, select New video.
Tip! Activate the Offline profile to ensure your video
recording is not interrupted by incoming calls.
Video settings
•
•
)
There are two kinds of settings for the video recorder:
Video setup and main settings. To adjust Video setup, see
‘Setup settings—adjust color and lighting’, p. 28. The setup
settings return to the default settings after you close the
camera, but the main settings remain the same until you
change them again. To change the main settings, select
Options > Settings and from the following:
•
Tip! Select Options > Turn icons on to display all
viewfinder indicators or Turn icons off to display
only the video status indicators.
Audio recording—Select Off if you do not want to record
sound.
Download from Www.Somanuals.com. All Manuals Search And Download.
24
Video quality—Set the quality of the video clip to TV
(high) (best quality for long term usage and playback on a
compatible TV or PC and handset), TV (normal), Handset
(high), Handset (normal), or Sharing (limited video clip
size to send using multimedia message (MMS)). If you
want to view the video on a compatible TV or PC, select TV
(high), which has VGA resolution (640x480) and the .mp4
file format. To send the video clip through MMS, select
Sharing (QCIF resolution, .3gp file format). The size of the
video clip recorded with Sharing is limited to 300 KB
(about 20 seconds in duration) so that it can be
conveniently sent as a multimedia message to a
compatible device.
Memory in use—Define the default memory store: device
memory or memory card (if inserted).
Take pictures
To activate the main camera rotate the display to image
mode. If the camera is in video mode, use the camera
mode key, or select Options > Switch to image mode to
switch to image mode.
To lock the focus on an object, press the capture key
halfway down (main camera only). The green locked focus
indicator appears on the display. If the focus was not
locked, the red focus indicator appears. Release the
capture key, and press it halfway down again. You can,
however, take the picture without locking the focus.
Video stabilisation—Select On to reduce camera shake
when recording the video.
Add to album—Select whether you want to add the
recorded video clip to a certain album in Gallery. Select
Yes to open a list of available albums.
To take a picture, in the main camera, press the capture
key. Do not move the device before the image is saved.
To make lighting and color adjustments before taking a
picture in image mode, scroll through the toolbar. See
‘Setup settings—adjust color and lighting’, p. 28.
Show captured video—Select whether you want the first
frame of the recorded video clip to be shown on the display
after the recording stops. Select Play from the toolbar
(main camera) or Options > Play (secondary camera) to
view the video clip.
Saving the captured image may take longer if you change
the zoom, lighting, or color settings.
The camera viewfinder displays the following:
Optical zoom during recording—Select On or Off. Select
Off to eliminate mechanical noise caused by lens
movement during optical zooming when recording.
Download from Www.Somanuals.com. All Manuals Search And Download.
25
•
Status
Tip! Select Options > Turn icons on to display all
viewfinder indicators or Turn icons off to display
only the camera status indicators.
Exit
indicators (1)
for sequence
on, self-timer
on; Automatic
When taking a picture, note the following:
•
•
Use both hands to keep the camera still.
The quality of a digitally zoomed picture is lower than
that of a nonzoomed picture.
The camera goes into the battery saving mode if there
are no keypresses for a moment. To continue taking
(
), On ( ),
or Off (
)
flash mode,
and the
current
•
Options
pictures, press
.
capture mode.
•
•
The toolbar (2), which you can scroll through before
capturing the image to select the shooting mode,
white balance, exposure value, and color tone (the
toolbar is not displayed during focus and image
capture).
The image resolution indicator (3) indicates whether
the quality of the image is Print 3M - Large
(2048x1536 resolution), Print 2M - Med.(1600x1200
resolution), Print 1.3M - Small (1280x960
resolution), or MMS 0.3M (640x480 resolution).
The image counter (4) displays the estimated number
of images you can capture using the current image
quality setting and memory in use (the counter is not
displayed during focus and image capture).
After you take the picture, select the following from the
toolbar:
•
•
If you do not want to keep the image, select Delete.
To send the video using multimedia, e-mail, Bluetooth
connectivity, or infrared, press
, or select Send.
•
•
To capture a new image, select New image.
To print the picture, select Print. See ‘Image print’,
p. 42.
Still image camera settings
•
•
There are two kinds of settings for the still image camera:
Image setup and main settings. To adjust Image setup, see
‘Setup settings—adjust color and lighting’, p. 28. The setup
settings return to the default settings after you close the
camera, but the main settings remain the same until you
The device memory ( ) and memory card (
indicators (5) show where images are saved.
)
Download from Www.Somanuals.com. All Manuals Search And Download.
26
change them again. To change the main settings, select
Options > Settings and from the following:
Shutter tone—Select the tone you want to hear when you
take a picture.
Image quality—Print 3M - Large (2048x1536 resolution),
Print 2M - Med. (1600x1200 resolution), Print 1.3M -
Small (1280x960 resolution), or MMS 0.3M (640x480
resolution). The better the image quality, the more memory
the image consumes. If you want to print the image, select
Print 3M - Large, Print 2M - Med., or Print 1.3M -
Small. If you want to send it through e-mail, select Print
1.3M - Small. To send the image through MMS, select
MMS 0.3M.
Memory in use—Select where to store your images.
Take pictures in a sequence
Sequence mode is available only in the main camera.
To set the camera to take up to six pictures in a sequence
(if enough memory available), select Options > Sequence
mode.
To take the pictures, press the capture key.
These resolutions are only available in the main camera.
After you take the pictures, they are shown in a grid on the
Add to album—Select whether you want to save the image
to a certain album in the gallery. If you select Yes, a list of
available albums opens.
display. To view a picture, press
to open it.
You can also use the sequence mode with the self-timer.
To return to the sequence mode viewfinder, press the
capture key.
Show captured image—Select Yes if you want to see the
captured image after it is taken, or No if you want to
continue taking pictures right away.
You in the picture—self-timer
The self-timer is available only in the main camera.
Extended zoom (main camera only)—Select On
(continuous) to allow the zoom increments to be smooth
and continuous between digital and extended digital zoom
or On (paused) to allow the zoom increments to pause at
the digital and extended digital step point. If you want to
limit the zoom to where the selected image quality is
maintained, select Off.
Use the self-timer to delay the capture so that you can
include yourself in the picture. To set the self-timer delay,
select Options > Self timer > 2 seconds, 10 seconds, or
20 seconds. To activate the self-timer, select Activate.
The self-timer indicator ( ) blinks and the device beeps
Flicker cancellation—Select 50Hz or 60Hz.
Download from Www.Somanuals.com. All Manuals Search And Download.
27
when the timer is running. The camera takes the picture
after the selected delay elapses.
mode uses its own lighting settings that have been
adjusted according to a certain kind of environment.
You can also use the self-timer in the sequence mode.
White balance—Select the current lighting condition from
the list. This allows the camera to reproduce colors more
accurately.
Tip! Select Options > Self timer > 2 secondsto keep
your hand steady when taking a picture.
Exposure value(images only)—Adjust the exposure time of
the camera.
Flash
Colour tone—Select a color effect from the list.
The flash is available only in the main camera.
The screen display changes to match any settings you
make so you see how the change affects the pictures or
videos.
Keep a safe distance when using the flash. Do not use the
flash on people or animals at close range. Do not cover
the flash while taking a picture.
The available settings vary depending on the selected
camera.
The camera has an LED flash for low light conditions. The
following flash modes are available: Automatic (
), On
(
), and Off ( ).
The setup settings apply only to the main camera.
Independent settings are available for image and video
modes, and are retained when switching between the two
modes.
To switch between the flash modes, press the flash key.
Setup settings—adjust color and
lighting
Shooting modes
To enable the camera to reproduce colors and lighting
more accurately or to add effects to your pictures or
videos, scroll through the toolbar, and select from the
following options:
A shooting mode helps you to find the right color and
lighting settings for the current environment. Select a
proper shooting mode for taking pictures or recording
video clips from the shooting mode list. The settings of
each shooting mode have been set according to a certain
style or environment.
Shooting mode—Select a proper shooting mode for the
environment in which you take pictures. Every shooting
Download from Www.Somanuals.com. All Manuals Search And Download.
28
Shooting modes are only available in the main camera.
Scroll through the toolbar, and select from the video or
image shooting modes.
When you take pictures, the default shooting mode is
Automatic.
To make your own shooting mode suitable for a certain
environment, select User > Options > Change. In the user
defined shooting mode you can adjust different lighting
and color settings. To copy the settings of another
shooting mode, select Based on shooting mode and the
desired shooting mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
29
Gallery
To store and organize your images, video clips, sound clips,
playlists, and streaming links, or share your files with
other compatible UPnP devices through wireless LAN,
memory card Select Copy to phone mem. or Move to
phone mem..
press
, and select Gallery. To open the gallery from the
with
with
Camera application, select Options > Go to Gallery. From
.
Camera, only the Images & video folder is available.
To reduce the size of images that you already copied to
other locations, such as to a compatible PC, select
Options > Transfer and memory > Shrink. To reduce the
resolution of an image to 640x480, select Shrink. To
increase free memory space after you have copied items to
other locations or devices, select a file and Options >
Transfer and memory > Free memory. See ‘Back up files’,
p. 43.
Tip! To switch from Gallery to the camera, in the
Images & video folder, press the capture key or the
camera mode key, or select Options > Go to Camera.
Select Images & video
Streaming links , Presentations
Home net. , and press to open it.
, Tracks , Sound clips
,
, All files , or
Video clips, .ram files, and streaming links are opened and
played in the RealPlayer application. See ‘RealPlayer’,
p. 78. You can also create albums; and mark, and add
items to albums. See ‘Albums’, p. 35.
To download files into Gallery in one of the main folders
using the browser, select Graphic downl., Video downl.,
Track downl., or Sound downl.. The browser opens, and
you can select a bookmark from which the site can
download.
To open a file, press
music and sound clips in Music player. See ‘View images
and video clips’, p. 31.
. Videos open in RealPlayer, and
To share media files saved in Gallery with other compatible
UPnP devices through wireless LAN, you must first create
and configure your wireless LAN home Internet access
point, and then configure the Home net. application. See
‘Wireless LAN’, p. 17.
To copy or move files to a compatible memory card (if
inserted) or to device memory, select a file and Options >
Move and copy. Select Copy to memory card or Move to
Download from Www.Somanuals.com. All Manuals Search And Download.
30
The options related to Home net. are not available in
Gallery before the settings for Home net. have been
configured.
clips in the gallery and Options > Edit. See ‘Edit video
clips’, p. 31.
them on your memory card (if inserted) for printing, select
Options > Print. See ‘Image print’, p. 42.
View images and video clips
Pictures taken and video clips recorded with the camera
are stored in Images & video in Gallery. Images and video
clips can also be sent to you in a multimedia message, as
an e-mail attachment, through Bluetooth connectivity, or
by using infrared. To be able to view a received image or
video clip in the gallery or in the media player, you must
save it in the device memory or on a compatible memory
card (if inserted).
To send a multimedia message to your service provider's
and select Upload (if available). Contact your service
provider for more information.
,
To view the image, scroll to an image, and press
.
When the image is opened, to zoom an image, select
Options > Zoom in or Zoom out. The zooming ratio is at
the top of the display. The zooming ratio is not stored
permanently.
Open Images & video in Gallery. The images and video clip
files are in a loop, and ordered by date. The number of files
is displayed. To browse the files one by one, scroll left or
right. To browse files in groups, scroll up or down.
To use the picture as a background image, select the
picture and Options > Assign > Set as wallpaper.
To edit a video clip or a photo, select Options > Edit. An
image editor or a video editor opens. See ‘Edit video clips’,
p. 31. See ‘Edit images’, p. 33.
To delete an image or video clip, press
.
Edit video clips
To edit video clips in Gallery and create custom video
clips, scroll to a video clip, and select Options > Edit. See
‘Gallery’, p. 30. To create custom video clips, combine and
trim video clips, and add images, sound clips, transitions,
To add an image or a video clip to an album in the gallery,
select Options > Albums > Add to album. See ‘Albums’,
p. 35.
Download from Www.Somanuals.com. All Manuals Search And Download.
31
and effects. Transitions are visual effects that you can add
in the beginning and end of the video or between the
video clips.
Edit image (shown only if you added an image)—Move,
remove, or duplicate an image; define how long it stays on
the screen; and set a background or a color effect to the
image.
You can also use Movie director to create custom video
a muvee with and select Options > Edit > Create muvee.
See ‘Movie director’, p. 81.
Edit sound clip (shown only if you have added a sound
clip)—Cut or move the sound clip, adjust its length, or
remove or duplicate the clip.
In the video editor you can see two timelines: video clip
timeline and sound clip timeline. The images, text, and
transitions added to a video clip are shown on the video
clip timeline. To switch between the timelines, scroll up or
down.
Edit transition—There are three types of transitions: at the
start of a video, at the end of a video, and transitions
between video clips. You can select start transition when
the first transition of the video is active.
Insert—Select Video clip, Image, Text, Sound clip, or New
sound clip.
Edit video, sound, image, text, and
transitions
Movie—Preview the movie in the full screen or as a
thumbnail, save or send the movie, or cut the movie to a
proper size for sending it in a multimedia message.
To create custom video clips, mark and select one or more
video clips, and select Options > Edit > Video editor.
To take a snapshot of a video clip, in the cut video view,
select Options > Take snapshot. In the thumbnail preview
To modify the video, select from the following options:
view, press
, and select Take snapshot.
Edit video clip—Cut, add color effect, use slow motion,
mute or unmute sound, move, remove, or duplicate the
clip.
To save your video, select Options > Movie > Save. To
define the Memory in use, select Options > Settings. The
default is the device memory.
Edit text (shown only if you added text)—Move, remove,
or duplicate text; change the color and style of the text;
define how long it stays on the screen; and add effects to
the text.
In Settings, you can also define Default video name,
Default sc. shot name, Resolution, and Memory in use.
Download from Www.Somanuals.com. All Manuals Search And Download.
32
To send the video, select Send > Via multimedia,
Via e-mail, Via Bluetooth, or Via infrared. Contact your
service provider for details of the maximum multimedia
message size that you can send.
area, select Back. The selected areas form a rectangle that
represents the cropped image.
If you selected a predefined aspect ratio, select the upper
left corner of the area to be cropped. To resize the
highlighted area, use the scroll key. To freeze the selected
Tip! If you want to send a video clip that is over the
maximum multimedia message size allowed by your
service provider, you can send the clip using Bluetooth
wireless technology. See ‘Send data’, p. 85. You can also
transfer your videos to a compatible PC using Bluetooth
connectivity, or by using a compatible memory card reader
enhancement.
area, press
. To move the area within the picture, use
the scroll key. To select the area to be cropped, press
.
To reduce redness of the eyes in an image, select
Options > Apply effect > Red eye reduction. Move the
cross onto the eye, and press
. A loop appears on the
display. To resize the loop to fit the size of the eye, use the
scroll key. To reduce the redness, press
.
Edit images
Shortcuts in the image editor:
•
•
To view an image in the full screen, press
return to the normal view, press again.
To rotate an image clockwise or counterclockwise,
press or
To zoom in or out, press
To move on a zoomed image, press
. To
To edit the pictures after taking them, or images already
saved in Gallery, select Options > Edit.
Select Apply effect to crop and rotate the image; adjust
the brightness, color, contrast, and resolution; and add
effects, text, clip art, or a frame to the picture.
.
•
•
or
.
,
,
or
.
To crop an image, select Options > Apply effect > Crop.
To crop the image size manually, select Manual or a
predefined aspect ratio from the list. If you select Manual,
a cross appears in the upper left corner of the image. Move
the scroll key to select the area to crop, and select Set.
Another cross appears in the lower right corner. Again
select the area to be cropped. To adjust the first selected
Slide show
Select Options > Slide show > Start to view images and
video clips in the full screen mode. The slide show starts
from the selected file. Select from the following:
Download from Www.Somanuals.com. All Manuals Search And Download.
33
Play—to open the RealPlayer application, and play a
When you open an image in the thumbnail view while it is
viewed on the TV, the Zoom in option is not available.
When image is not zoomed, the opened image is displayed
on the TV in full screen.
selected video clip
Pause—to pause the slide show
Continue—to resume the slide show, if paused
End—to close the slide show
You can view videos and images as a slide show. All items
in an album or marked videos and images are displayed on
the TV in full screen while the selected music plays.
To browse the images, press
(previous) or
(next).
When you open a highlighted video clip, RealPlayer starts
playing the video clip on the device display and the TV
screen. See ‘RealPlayer’, p. 78.
To adjust the tempo of the slide show, before starting the
slide show, select Options > Slide show > Settings>
Delay between slides.
All audio, including the stereo video clip sound, ringing
tone, and key tone, is routed to the TV when the Nokia
Video-Out Cable is connected to the device. You can use
the device microphone normally.
To add sound to the slide show, select Options > Slide
show > Settingsand from the following:
Music—Select On or Off.
Track—Select a music file from the list.
TV out settings must be configured for the applicable TV
system and TV aspect ratio. See ‘TV configuration’, p. 114.
To decrease or increase the volume during the slide show,
press
or
.
Presentations
TV out mode
With presentations, you can view .svg (scalable vector
graphics) files, such as cartoons and maps. These images
maintain their appearance when printed or viewed with
different screen sizes and resolutions. To view .svg files,
select the Presentations folder, scroll to an image, and
select Options > Play.
You can watch videos and images stored in your device on
the screen of a compatible TV. Connect a compatible
Nokia Video connectivity cable to the video input of a
compatible TV. For all applications other than the Images
& video folder in Gallery and RealPlayer, the TV screen
displays what is displayed on the screen of your device.
To zoom in, press
. To zoom out, press
.
Download from Www.Somanuals.com. All Manuals Search And Download.
34
To switch between full screen and normal screen, press *.
You can only print images that are in jpeg format.
, and select Gallery > Images & video. Select
1 Press
an image or images, and Options > Print > Order
prints.
Albums
With albums you can conveniently manage your images
and video clips. To view the albums list, in the Images &
video folder, select Options > Albums > View albums.
2 Select a service provider from the list.
3 Select Options and from the following:
Open—to start the connection to the service provider
Remove—to remove the service provider from the list.
If you remove the last service provider from the list, the
Order prints option is not available until you have at
least one configuration file installed.
To add a picture or a video clip to an album in the gallery,
scroll to a picture or video clip, and select Options >
Albums > Add to album. A list of albums opens. Select the
album to which you want to add the picture or video clip,
Log—to view the details of the previous orders: the
name of the service provider, total sum, and status of
the order.
When you are connected to the service provider server,
the images preview view opens, and displays the
images you selected in Gallery.
and press
.
To remove a file from an album, press
. The file is not
deleted from the Images & video folder in Gallery.
Print online
With the Print online application you can print images
online, and order different products with the selected
image, such as mugs or mouse pads. The available products
depend on the service provider.
4 Select Options and from the following:
Preview—to view the image before ordering a print.
Scroll up or down to view the images.
Order now—to submit your order
Change product order—to adjust the product details
and number of copies for the selected image. In the
product order view, you can select which product and
of what type you want to order. The available options
and products vary depending on the service provider.
Scroll left or right to view and change the image
details of the other images in the order.
In order to use Print online, you must subscribe to the
service with an online printing service provider and have at
least one printing service configuration file installed. The
files can be obtained from printing service providers that
support Print online.
Download from Www.Somanuals.com. All Manuals Search And Download.
35
Change customer info—to change the customer and
order information. You can copy the customer
information from contacts.
Add image—to add more images to the order
Remove image—to remove images from the order
Log—to view the details of the previous orders.
When the order is sent, Order sent successfully is
displayed.
usually subscribe to the service on the web page of the
service provider. Contact your service provider for details
on subscribing to the service. For more information on
compatible service providers, see www.nokia.com/support.
When you open the service for the first time in the Online
sharing application, you are prompted to provide the user
name and password. You can access the settings later
through Options > Settings in the Online sharing
application. See ‘Online sharing settings’, p. 37.
Online sharing
Upload files
Note: The availability of this service may vary
according to your country or sales area.
Press
, and select Gallery > Images & video, the files
you want to upload, and Options > Send > Web upload.
You can access the Online sharing application also from
the main camera.
With the Online sharing application, you can share your
images and videos in online albums, weblogs, or in other
online sharing services on the web. You can upload
content, save unfinished posts as drafts and continue
later, and view the content of the albums. The supported
content types may vary depending on the service provider.
The Select service view opens. To create a new account to
a service, select Options > Add new account or the service
icon with the text Create new in the services list. If you
have created a new account offline, or modified an
account or service settings through a web browser on a
compatible PC, to update the services list in your device,
select Options > Retrieve services. To select a service,
press the scroll key.
Copyright protections may prevent some images, music
(including ringing tones), and other content from being
copied, modified, transferred or forwarded.
Get started
To use Online sharing, you must subscribe to the service
with an online image sharing service provider. You can
When you select the service, the selected images and
videos are shown in the edit state. You can open and view
Download from Www.Somanuals.com. All Manuals Search And Download.
36
the files, reorganize them, add text to them, or add new
files.
• Sent—to view the 20 latest entries created through
your device
• New post—to create a new entry
To cancel the web upload process, and save the created
post as a draft, select Back > Save as draft. If the
uploading has already started, select Cancel > Save as
draft.
The available options may vary depending on the service
provider.
Online sharing settings
To edit the Online sharing settings, in the Online sharing
application, select Options > Settings.
To connect to the service and upload the files to the web,
select Options > Upload, or press
.
Open online service
My accounts
To view uploaded images and videos in the online service,
or draft and sent entries in your device, in the Images &
video folder, select Options > Open service. Accounts can
also be created and modified offline. If you have created a
new account offline, or modified an account or service
settings through a web browser, and wish to update the
services list in your device, select Options > Retrieve
services. Select a service from the list.
In My accounts, you can create new accounts or edit
existing accounts. To create a new account, select
Options> Add new account. To edit an existing account,
select an account and Options > Edit. Select from the
following:
Account name—to enter a name for the account
Service provider—to select the service provider you want
to use. You cannot change the service provider for an
existing account, you must create a new account for the
new service provider. If you delete an account in My
accounts, the services related to the account are also
deleted from you device, including the sent items for the
service.
After you open a service, select from the following:
• Open in Web browser—to connect to the selected
service and view the uploaded and draft albums in the
web browser. The view may vary depending on the
service provider.
• Drafts—to view and edit the draft entries, and upload
them to the web
Download from Www.Somanuals.com. All Manuals Search And Download.
37
User name and Password—to enter the user name and
password you created for your account when you
registered to the online service
Upload image size—to select the size in which the images
are uploaded to the service
Application settings
Display image size—to select the size in which the image
is shown on the display of your device. This setting does
not affect the upload image size.
Display text size—to select the font size used to display
text in draft and sent entries, or when you add or edit text
to a new entry
Advanced
Service providers—to view or edit service provider
settings, add a new service provider, or view details of a
service provider. If you change the service provider, all the
My accounts information for the previous service
provider is lost. You cannot change the settings of
predefined service providers.
Default access point—to change the access point used to
connect to the online service, select the access point you
want.
Download from Www.Somanuals.com. All Manuals Search And Download.
38
Media applications
Play music
Music player
When you open the music player, the previously played
track or playlist is displayed. To view the music library,
Press
, and select Music player. With the music player,
select
or Options > Music library and the desired
you can play music files and create and listen to playlists.
song list. To start playing the songs in the view, select
Warning: Listen to music at a moderate level.
Continuous exposure to high volume may damage your
hearing. Do not hold the device near your ear when the
loudspeaker is in use, because the volume may be
extremely loud.
Options > Play.
When a song is playing, to change between play and
pause, press
or
.
To stop a song, press
. To fast forward or rewind, press
and hold
or
. To start playing the next or previous
or .
song, press
Add music
When you open the music player for the first time, the
player searches the device memory for music files to create
a music library.
To view the currently played song list, select
or
Options > Open 'Now playing'. To save the song list as a
playlist, select Options > Add to track list, and create a
new playlist, or select a saved playlist.
After you add or remove music files in the device, update
your music library. Select Options > Music library >
Options > Update Music library.
To adjust the volume, press
or
.
To modify the tone of music playback, select Options >
Equaliser.
Tip! You can transfer music files from your device to
a compatible memory card (if inserted) with Nokia
Music Manager available in Nokia PC Suite.
To select between random play and normal play mode,
select Options > Random play. To select whether playing
Download from Www.Somanuals.com. All Manuals Search And Download.
39
stops at the end of the playlist or restarts from its
beginning, select Options > Loop.
Transfer music
You can transfer music from a compatible PC or other
compatible devices using a compatible USB cable or
Bluetooth connectivity. For details, see ‘Bluetooth
connectivity’, p. 83.
To open your web bookmarks for downloading music,
select Options > Track downloads.
To return to the standby mode and leave the music
playing in the background, select Options > Play in
background.
To refresh the library after you have updated the song
selection in your device, select Options > Update Music
library
Music library
The requirements of the PC for music transfer:
To view the music library, select Options > Music library.
All tracks lists all music. To view sorted songs, select
Albums, Artists, Genres, or Composers. The album, artist,
genre, and composer information is collected from the ID3
or M4A tags of the song files, if available.
•
•
Microsoft Windows XP operating system (or later)
A compatible version of Windows Media Player
application. You can get more detailed information
about Windows Media Player compatibility from the
Nokia N93 section of the Nokia website.
To add songs, albums, artists, genres, or composers to a
playlist, select the items and Options > Add to track list.
You can create a new playlist or add to an existing one.
•
Nokia PC Suite 6.7 or later
Transfer music from PC
To view playlists, select Track lists. To create a new
playlist, select Options > New track list. When viewing a
playlist you have created yourself, to add more songs,
select Options > Add tracks.
You can use three different methods to transfer music:
•
To view your device on a PC as an external hard drive
where you can transfer any data files, make the
connection with a compatible USB cable or Bluetooth
connectivity. If you are using the USB cable, select
Mass storage as the connection mode. A compatible
memory card needs to be inserted in the device.
To synchronize music with Windows Media Player,
connect the compatible USB cable and select Media
To delete a playlist, press
. Deleting a playlist only
deletes the playlist, not the music files.
•
Download from Www.Somanuals.com. All Manuals Search And Download.
40
player as the connection mode. A compatible memory
card needs to be inserted in the device.
To use Nokia Music Manager in Nokia PC Suite, connect
the compatible USB cable and select PC Suite as the
connection mode.
To transfer manual selections:
1 After your device is connected with Windows Media
Player, select your device in the navigation pane, if
more than one device is connected.
2 Drag the songs or albums to the list pane for
synchronization. To remove songs or albums, select an
item in the list, and click Remove from list.
3 Check that the list pane contains the files you want to
synchronize and that there is enough free memory on
the device. Click Start Sync. to start the
synchronization.
•
To change the default USB connection mode, press
select Connect. > Data cbl. > Data cable mode.
,
Both Windows Media Player and Nokia Music Manager in
Nokia PC Suite have been optimized for transferring music
files. For information about transferring music with Nokia
Music Manager, see the Nokia PC Suite user guide.
Automatic synchronization
Music transfer with Windows Media Player
To change the default file transfer option in Windows
Media Player, click the arrow under Sync, select your
device, and click Set up Sync. Clear or select the Sync this
device automatically check box.
The functionality of the music synchronization may vary
between different versions of the Windows Media Player
application. For more information, see the corresponding
Windows Media Player guides and helps.
If the Sync this device automatically check box is
selected and you connect your device, the music library in
your device is automatically updated based on playlists
you have selected in Windows Media Player.
Manual synchronization
After connecting your device with a compatible PC,
Windows Media Player selects manual synchronization if
there is not enough free memory in your device. With
manual synchronization, you can select the songs and
playlists that you want to move, copy, or remove.
If no playlists have been selected, the whole PC music
library is selected for synchronization. Note that your PC
library may contain more files that can fit to the device
memory and the compatible memory card of your device.
See the Windows Media Player help for more information.
The first time you connect your device you must enter a
name that is used as the name of your device in Windows
Media Player.
Download from Www.Somanuals.com. All Manuals Search And Download.
41
The playlists on your device are not synchronized with the
Windows Media Player playlists.
If the default printer is not available, a list of available
printing devices is displayed.
To change the default printer, select Options > Print
settings > Default printer.
Image print
Use Image print to print your images using a compatible
data cable, wireless LAN (if available), Bluetooth
Print preview
The print preview view opens only when you start printing
an image in the gallery.
connectivity, or a compatible memory card (if available).
You can only print images that are in jpeg format. The
pictures taken with the camera are automatically saved in
jpeg format.
The selected images are displayed using predefined
layouts. To change the layout, press
or
through the
available layouts for the selected printer. If the images do
To print images with Image print, select the image you
want to print and the print option in the gallery, camera,
image editor, or image viewer.
not fit on a single page, press
additional pages.
or
to display the
To print to a printer compatible with Image print, connect
the data cable before you select the print option.
Print settings
The available options vary, depending on the capabilities of
the printing device you selected.
Printer selection
When you use Image print for the first time, a list of
available printers is displayed after you select the image.
Select a printer. The printer is set as the default printer.
To set a default printer, select Options > Default printer.
To select the paper size, select Paper size, the size of paper
from the list, and OK. Select Cancel to return to the
previous view.
If you have connected a printer compatible with Image
print using a Nokia connectivity cable CA-53, the printer
is automatically displayed.
Download from Www.Somanuals.com. All Manuals Search And Download.
42
Back up files
To transfer and back up media files from your device to a
Transfer and memory > Automatic transfer. See
‘Wireless LAN’, p. 17.
Your device starts a device search. Select a device and a
folder to which you want to transfer the media files. Select
OK.
To change the Storage device or Storage folder settings,
select Options > Settings.
Download from Www.Somanuals.com. All Manuals Search And Download.
43
Messaging
Press
, and select Messag.. In Messag., you can create,
My folders—Organize your messages into folders.
send, receive, view, edit, and organize text messages,
multimedia messages, e-mail messages, and special text
messages containing data. You can also receive messages
and data using Bluetooth connectivity or infrared, receive
web service messages, cell broadcast messages, and send
service commands.
Tip! To avoid rewriting messages that you send often,
use texts in the templates folder.
Mailbox—Connect to your remote mailbox to retrieve
your new e-mail messages or view your previously
retrieved e-mail messages offline. See ‘E-mail’, p. 54.
Drafts—Draft messages that have not been sent are
Note: Your device may indicate that your
message was sent to the message center
number programmed into your device. Your
device may not indicate whether the message is
received at the intended destination. For more details
about messaging services, contact your service
provider.
stored here.
Sent—The last 20 messages that have been sent,
excluding messages sent using Bluetooth connectivity or
infrared, are stored here. To change the number of
messages to be saved, see ‘Other settings’, p. 56.
Outbox—Messages waiting to be sent are temporarily
stored here.
To create a new message, select New message.
Only devices that have compatible features can receive
and display multimedia messages. The appearance of a
message may vary depending on the receiving device.
Example: Messages are placed in the outbox, for
example, when your device is outside network
coverage. You can also schedule e-mail messages to be
sent the next time you connect to your remote mailbox.
Messag. contains the following folders:
Reports—You can request the network to send you a
delivery report of the text messages and multimedia
messages you have sent (network service). Receiving a
Inbox—Received messages, except e-mail and cell
broadcast messages, are stored here. E-mail messages are
stored in the Mailbox.
Download from Www.Somanuals.com. All Manuals Search And Download.
44
delivery report of a multimedia message that has been sent
to an e-mail address may not be possible.
Traditional text input
is displayed when you are writing text using
traditional text input.
Tip! When you have opened any of the default folders,
to switch between the folders, press
or
.
•
•
•
Press a number key (
—
) repeatedly until the
To enter and send service requests (also known as USSD
commands), such as activation commands for network
services, to your service provider, select Options > Service
command in the main view of Messag..
desired character appears. There are more characters
available for a number key than are printed on the key.
If the next letter is located on the same key as the
present one, wait until the cursor appears (or press
to end the time-out period), and enter the letter.
Cell broadcast (network service) allows you to receive
messages on various topics, such as weather or traffic
conditions from your service provider. For available topics
and relevant topic numbers, contact your service provider.
In the main view of Messaging, select Options > Cell
broadcast. In the main view, you can see the status of a
topic, a topic number, name, and whether it has been
flagged ( ) for follow-up.
To insert a space, press
. To move the cursor to the
next line, press three times.
Predictive text input
You can enter any letter with a single keypress. Predictive
text input is based on a built-in dictionary to which you
can add new words.
is displayed when you write text
Cell broadcast messages cannot be received in UMTS
networks. A packet data connection may prevent cell
broadcast reception.
using predictive text input.
1 To activate predictive text input, press
, and select
Predictive text on. This activates predictive text input
for all editors in the device.
Write text
ABC, abc, and Abc indicate the selected character mode.
123 indicates the number mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
45
2 To write the desired word,
press the keys,
Write compound words
Write the first half of a compound word; to confirm it,
—
.
Press each key only once
for one letter. For
example, to write "Nokia"
when the English
press
. Write the last part of the compound word. To
complete the compound word, press
to add a space.
Turn predictive text input off
To turn predictive text input off for all editors in the device,
dictionary is selected,
press
for k,
for a.
for N,
for o,
press
, and select Predictive text > Off.
for i, and
Tip! To turn predictive text input on or off, quickly
press
twice.
The word suggestion changes after each keypress.
3 When you finish writing the word correctly, press
Tips on text input
To insert a number in the letter mode, press and hold the
desired number key.
to confirm it, or press
to add a space.
repeatedly to view
the matching words the dictionary has found one by
If the word is not correct, press
one, or press
Matches.
, and select Predictive text >
To switch between the letter and number mode, press and
hold
.
If the ? character is shown after the word, the word is
not in the dictionary. To add a word to the dictionary,
select Spell, enter the word using traditional text
input, and select OK. The word is added to the
dictionary. When the dictionary is full, a new word
replaces the oldest added word.
To switch between the different character modes, press
.
To delete a character, press
character, press and hold
. To delete more than one
.
4 Start writing the next word.
To use the most common punctuation marks, press
To open a list of special characters, press and hold
.
.
Tip! To insert several special characters at the same
time, press when you select each character.
Download from Www.Somanuals.com. All Manuals Search And Download.
46
2 In the To field, press
to select recipients or
groups from contacts, or
enter the recipient’s
phone number or e-mail
address. To add a
Write and send messages
The appearance of a multimedia message may vary,
depending on the receiving device.
Before you can create a multimedia message or write an
e-mail, you must have the correct connection settings in
place. See ‘Receive MMS and e-mail settings’, p. 48 and
‘E-mail’, p. 54.
semicolon (;) that
separates the recipients,
press
. You can also
The wireless network may limit the size of MMS messages.
If the inserted picture exceeds this limit, the device may
make it smaller so that it can be sent by MMS.
copy and paste the
number or address from
the clipboard.
3 In the Subjectfield, enter
1 Select New message and one of the following:
Text msg.—to send a text message
the subject of a multimedia message or e-mail. To
change the fields that are visible, select Options >
Address fields.
Multimedia message—to send a multimedia message
(MMS)
4 In the message field, write the message. To insert a
template, select Options > Insert or Insert object >
Template.
E-mail—to send an e-mail
If you have not set up your e-mail account, you are
prompted to do so. To start creating the e-mail settings
with the mailbox guide, select Start.
5 To add a media object to a multimedia message, select
Options > Insert object > Image, Sound clip, or Video
clip. When sound is added,
is shown.
To change the format in which recorded videos are
saved, see ‘Video settings’, p. 24.
6 To take a new picture or record sound or video for a
multimedia message, select Insert new > Image,
Sound clip, or Video clip. To insert a new slide to the
message, select Slide.
Download from Www.Somanuals.com. All Manuals Search And Download.
47
To see what the multimedia message looks like, select
Options > Preview.
Receive MMS and e-mail settings
You may receive the settings in a message from your
service provider. See ‘Data and settings’, p. 49.
7 To add an attachment to an e-mail, select Options >
Insert > Image, Sound clip, Video clip, or Note.
E-mail attachments are indicated by
.
For availability of and subscription to data services,
contact your service provider. Follow the instructions given
by your service provider.
Tip! To send other file types as attachments, open
the appropriate application, and select Send > Via
e-mail, if available.
Enter the MMS settings manually
8 To send the message, select Options > Send, or
1 Press
, and select Tools > Settings > Connection >
press
.
Access points, and define the settings for a multimedia
messaging access point. See ‘Connection’, p. 106.
Your device supports the sending of text messages beyond
the character limit for a single message. Longer messages
are sent as a series of two or more messages. Your service
provider may charge accordingly. Characters that use
accents or other marks, and characters from some
language options, take up more space, limiting the
number of characters that can be sent in a single message.
2 Press
, and select Messaging > Options >
Settings > Multim. msg. > Access point in use and
the access point you created as the preferred
connection. See also ‘Multimedia messages’, p. 53.
Before you can send, receive, retrieve, reply to, and forward
e-mail, you must do the following:
E-mail messages are automatically placed in Outbox
before sending. If sending does not succeed, the e-mail is
left in the Outbox with the Failed status.
•
•
Configure an IAP correctly. See ‘Connection’, p. 106.
Define your e-mail settings correctly. If you select
Mailbox in the Messag. main view and have not set up
your e-mail account, you are prompted to do so. To
start creating the e-mail settings with the mailbox
guide, select Start. See also ‘E-mail’, p. 54.
You must have a separate e-mail account. Follow the
instructions given by your remote mailbox and internet
service provider (ISP).
Tip! You can combine images, video, sound, and text
to a presentation and send it in a multimedia message.
Start to create a multimedia message, and select
Options > Create presentation. The option is shown
only if MMS creation mode is set to Guided or Free.
See ‘Multimedia messages’, p. 53.
Download from Www.Somanuals.com. All Manuals Search And Download.
48
When you open a multimedia message ( ), you may see
an image and a message. is shown if sound is
included, or if video is included. To play the sound or
Inbox—receive messages
the video, select the indicator.
In the Inbox folder,
indicates an unread text message,
an unread multimedia message,
data received
To see the media objects that have been included in the
multimedia message, select Options > Objects.
through infrared, and
connectivity.
data received through Bluetooth
If the message includes a multimedia presentation,
displayed. To play the presentation, select the indicator.
is
When you receive a message,
are shown in the standby mode. To open the message,
select Show. To open a message in Inbox, press
and 1 new message
.
Data and settings
Your device can receive many kinds of messages that
To reply to a received message, select Options > Reply.
To print a text or a multimedia message on a compatible
basic print profile (BPP) equipped printer with Bluetooth
connectivity (such as HP Deskjet 450 Mobile Printer or HP
Photosmart 8150), select Options > Print.
contain data (
):
Configuration message—You may receive settings from
your service provider or company information
management department in a configuration message. To
save the settings, select Options > Save all.
Multimedia messages
Business card—To save the information to Contacts,
select Options > Save business card. Certificates or
sound files attached to the business card are not saved.
Important: Exercise caution when opening
messages. Multimedia message objects may contain
malicious software or otherwise be harmful to your device
or PC.
Ringing tone—To save the ringing tone, select Options >
Save.
You may receive a notification that a multimedia message
is waiting in the multimedia message center. To start a
packet data connection to retrieve the message to your
device, select Options > Retrieve.
Operat. logo—To have the logo shown in the standby
mode instead of the service provider’s own identification,
select Options > Save.
Download from Www.Somanuals.com. All Manuals Search And Download.
49
Calen. entry—To save the invitation, select Options >
When you create a new mailbox, the name you give to the
mailbox replaces Mailbox in the Messaging main view.
You can have up to six mailboxes.
Save to Calendar.
Web message—To save the bookmark to the bookmarks
listed in web, select Options > Add to bookmarks. If the
message contains both access point settings and
Open the mailbox
bookmarks, to save the data, select Options > Save all.
connect to the mailbox (Connect to mailbox?).
E-mail notif.—The note tells you how many new e-mails
you have in your remote mailbox. An extended
notification may list more detailed information.
To connect to your mailbox and retrieve new e-mail
headings or messages, select Yes. When you view
messages online, you are continuously connected to a
remote mailbox using a data connection. See also
‘Connection’, p. 106.
Web service messages
Web service messages ( ) are notifications (for
example, news headlines) and may contain a text message
or a link. For availability and subscription, contact your
service provider.
To view previously retrieved e-mail messages offline, select
No. When you view e-mail messages offline, your device is
not connected to the remote mailbox.
Retrieve e-mail messages
If you are offline, select Options > Connect to start a
connection to the remote mailbox.
Mailbox
If you select Mailbox and have not set up your e-mail
account, you are prompted to do so. To start creating the
e-mail settings with the mailbox guide, select Start. See
also ‘E-mail’, p. 54.
Important: Exercise caution when opening
messages. E-mail messages may contain malicious
software or otherwise be harmful to your device or PC.
1 When you have an open connection to a remote
mailbox, select Options > Retrieve e-mail and one of
the following:
Download from Www.Somanuals.com. All Manuals Search And Download.
50
New—to retrieve all new e-mail messages
Selected—to retrieve only the e-mail messages that
have been marked
You can also receive meeting requests in the mailbox. See
‘Meeting requests’, p. 74, and ‘Create calendar entries’,
p. 74.
All—to retrieve all messages from the mailbox
To stop retrieving messages, select Cancel.
2 After you retrieve the e-mail messages, you can
continue viewing them online, or select Options >
Disconnect to close the connection and view the
e-mail messages offline.
To print an e-mail message on a compatible basic print
profile (BPP) equipped printer with Bluetooth connectivity
(such as HP Deskjet 450 Mobile Printer or HP Photosmart
8150), select Options > Print.
Retrieve e-mail messages automatically
E-mail status indicators are as follows:
The new e-mail (offline or online mode) has not
been retrieved to your device.
The new e-mail has been retrieved to your device.
The e-mail message has been read, and it has not
been retrieved to your device.
The e-mail message has been read.
The e-mail heading has been read and the message
content has been deleted from the device.
To retrieve messages automatically, select Options >
E-mail settings > Automatic retrieval > Header
retrieval > Always enabled or Only in home net., and
define when and how often the messages are retrieved.
Setting the device to retrieve e-mail automatically may
involve the transmission of large amounts of data through
your service provider's network. Contact your service
provider for information about data transmission charges.
3 To open an e-mail message, press
. If the e-mail
Delete e-mail messages
message has not been retrieved and you are offline, you
are asked if you want to retrieve this message from the
mailbox.
To delete the contents of an e-mail message from the
device while still retaining it in the remote mailbox, select
Options > Delete. In Delete msg. from:, select Phone
only.
To view e-mail attachments, open a message that has the
attachment indicator , and select Options >
Attachments. If the attachment has a dimmed indicator,
it has not been retrieved to the device; select Options >
Retrieve.
The device mirrors the e-mail headings in the remote
mailbox. Although you delete the message content, the
e-mail heading stays in your device. If you want to remove
Download from Www.Somanuals.com. All Manuals Search And Download.
51
the heading as well, you must delete the e-mail message
from your remote mailbox; then make a connection from
your device to the remote mailbox again to update the
status.
1 In the Messag. main view, select Options > SIM
messages.
2 Select Options > Mark/Unmark > Mark or Mark all to
mark messages.
3 Select Options > Copy. A list of folders opens.
4 To start copying, select a folder and OK. To view the
messages, open the folder.
To delete an e-mail from the device and the remote
mailbox, select Options > Delete. In Delete msg. from:,
select Phone and server.
If you are offline, the e-mail is deleted first from your
device. During the next connection to the remote mailbox,
it is automatically deleted from the remote mailbox. If you
are using the POP3 protocol, messages marked to be
deleted are removed only after you have closed the
connection to the remote mailbox.
Messaging settings
Fill in all fields marked with Must be defined or with a red
asterisk. Follow the instructions given by your service
provider. You may also obtain settings from your service
provider in a configuration message.
To cancel deleting an e-mail from the device and server,
scroll to an e-mail that has been marked to be deleted
during the next connection ( ), and select Options >
Restore.
Some or all message centers or access points may be preset
for your device by your service provider, and you may not
be able to change, create, edit, or remove them.
Text messages
Disconnect from the mailbox
When you are online, to end the data connection to the
remote mailbox, select Options > Disconnect.
Press
, and select Messag. > Options > Settings >
Text msg. and from the following:
Message centres—View a list of all text message centers
that have been defined.
View messages on a SIM card
Before you can view SIM messages, you must copy them
to a folder in your device.
Character encoding— To use character conversion to
another encoding system when available, select Reduced
support.
Download from Www.Somanuals.com. All Manuals Search And Download.
52
Msg. centre in use—Select which message center is used
informs you if you try to send a message that may not be
supported by the recipient. Select Restricted; the device
prevents you from sending messages that may not be
supported.
to deliver text messages.
Receive report—Select whether the network sends
delivery reports on your messages (network service).
Message validity—Select how long the message center
resends your message if the first attempt fails (network
service). If the recipient cannot be reached within the
validity period, the message is deleted from the message
center.
Access point in use—Select which access point is used as
the preferred connection for the multimedia message
center.
Multimedia retrieval—Select how you want to receive
multimedia messages. To receive multimedia messages
automatically in your home network, select Auto. in
home network. Outside your home network, you receive a
notification that there is a multimedia message that you
can retrieve in the multimedia message center.
Message sent as—Change this option only if you are sure
that your message center is able to convert text messages
into these other formats. Contact your service provider.
Preferred conn.—Select the connection used for sending
text messages: GSM network or packet data, if supported
by the network. See ‘Connection’, p. 106.
When you are outside your home network, sending and
receiving multimedia messages may cost you more.
Reply via same ctr.—Select whether you want the reply
message to be sent using the same text message center
number (network service).
If you select Multimedia retrieval > Always automatic,
your device automatically makes an active packet data
connection to retrieve the message both in and outside
your home network.
Multimedia messages
Allow anon. msgs.—Select whether you want to reject
messages from an anonymous sender.
Press
, and select Messag. > Options > Settings >
Multimedia message and from the following:
Receive adverts—Define whether you want to receive
multimedia message advertisements.
Image size—Define the size of the image in a multimedia
message: Original (shown only when the MMS creation
mode is set to Guided or Free), Small, or Large.
Download from Www.Somanuals.com. All Manuals Search And Download.
53
Receive report—Select whether you want the status of
the sent message to be shown in the log (network service).
Receiving a delivery report of a multimedia message that
has been sent to an e-mail address may not be possible.
Connection settings
To edit the settings for the e-mail you receive, select
Incoming e-mail and from the following:
User name—Enter your user name, given to you by your
service provider.
Deny report sending—Select whether you want to
prevent your device from sending delivery reports of
received multimedia messages.
Password—Enter your password. If you leave this field
blank, you are prompted for the password when you try to
connect to your remote mailbox.
Message validity—Select how long the message center
resends your message if the first attempt fails (network
service). If the recipient cannot be reached within the
validity period, the message is deleted from the message
center.
Incoming mail serv.—Enter the IP address or host name of
the mail server that receives your e-mail.
Access point in use—Select an IAP. See ‘Connection’,
p. 106.
E-mail
Mailbox name—Enter a name for the mailbox.
Press
, and select Messag. > Options > Settings >
Mailbox type—Defines the e-mail protocol that your
remote mailbox service provider recommends. The options
are POP3 and IMAP4. This setting can be selected only
once and cannot be changed if you have saved or exited
from the mailbox settings. If you use the POP3 protocol,
e-mail messages are not updated automatically when you
are online. To see the latest e-mail messages, you must
disconnect and make a new connection to your mailbox.
E-mail and from the following:
Mailboxes—Select a mailbox to change the following
settings: Connection settings, User settings, Retrieval
settings, and Automatic retrieval.
Mailbox in use— Select which mailbox you want to use
for sending e-mail.
To create a new mailbox, select Options > New mailbox
in the mailbox main view.
Security (ports)—Select the security option used to secure
the connection to the remote mailbox.
Port—Define a port for the connection.
Download from Www.Somanuals.com. All Manuals Search And Download.
54
APOP secure login (for POP3 only)—Use with the POP3
protocol to encrypt the sending of passwords to the
remote e-mail server while connecting to the mailbox.
Send copy to self—Select whether you want to save a
copy of the e-mail to your remote mailbox and to the
address defined in My e-mail address.
To edit the settings for the e-mail you send, select
Outgoing e-mail and from the following:
Include signature—Select whether you want to attach a
signature to your e-mail messages.
My e-mail address—Enter the e-mail address given to you
by your service provider. Replies to your messages are sent
to this address.
New e-mail alerts—Select whether you want to receive
the new e-mail indications, a tone and a note, when new
Outgoing mail serv.—Enter the IP address or host name of
the mail server that sends your e-mail. You may only be
able to use the outgoing server of your service provider.
Contact your service provider for more information.
Default encoding—Select another encoding according to
language.
Retrieval settings
E-mail to retrieve—Define which parts of the e-mail are
retrieved: Headers only, Size limit, or Msgs. & attachs..
Access point in use—Select an IAP. See ‘Connection’,
p. 106.
Retrieval amount—Define how many new e-mail
messages are retrieved to the mailbox.
The settings for User name, Password, Security (ports),
and Port are similar to the ones in Incoming e-mail.
IMAP4 folder path (for IMAP4 only)—Define the folder
path for folders to be subscribed.
User settings
My name—Enter your own name. Your name replaces your
e-mail address in the recipient’s device when the
recipient’s device supports this function.
Folder subscriptions (for IMAP4 only)—Subscribe to other
folders in the remote mailbox and retrieve content from
those folders.
Send message—Define how e-mail is sent from your
device. Select Immediatelyfor the device to connect to the
mailbox when you select Send message. If you select
During next conn., e-mail is sent when the connection to
the remote mailbox is available.
Automatic retrieval
Header retrieval—Select whether you want the device to
retrieve new e-mail automatically. You can define when,
and how often, the messages are retrieved.
Download from Www.Somanuals.com. All Manuals Search And Download.
55
Setting the device to retrieve e-mail automatically may
involve the transmission of large amounts of data through
your service provider's network. Contact your service
provider for information about data transmission charges.
Other settings
Press
, and select Messaging > Options > Settings >
Other and from the following:
Save sent messages—Select whether you want to save a
copy of the text messages, multimedia messages, or e-mail
that you send to the Sent folder.
Web service messages
Press
, and select Messaging > Options > Settings >
No. of saved msgs.—Define how many sent messages are
saved to the Sent folder at a time. The default limit is 20
messages. When the limit is reached, the oldest message is
deleted.
Service message. Select whether you want to receive
service messages. If you want to set the device to
automatically activate the browser and start a network
connection to retrieve content when you receive a service
message, select Download messages > Automatically.
Memory in use—If a compatible memory card is inserted
in the device, select Phone memory or Memory card to
save your messages.
Cell broadcast
Check the available topics and related topic numbers with
your service provider. Press
Options > Settings > Cell broadcast and from the
following:
, and select Messaging >
Reception—Select whether you want to receive cell
broadcast messages.
Language—Select the languages in which you want to
receive messages: All, Selected, or Other.
Topic detection—Select whether the device
automatically searches for new topic numbers, and saves
the new numbers without a name to the topic list.
Download from Www.Somanuals.com. All Manuals Search And Download.
56
Make calls
You must copy the contacts from your SIM card to
contacts’, p. 68.
Voice calls
Tip! To increase or decrease the volume during a call,
press
or
. If you have set the volume to Mute,
or keys.
To call your voice mailbox (network service), press and
you can still adjust the volume with the
hold
in the standby mode. See also ‘Call divert’, p. 112.
You can make voice calls in the fold-open mode and view
mode. See ‘Modes’, p. 11.
Tip! To change the phone number of your voice
mailbox, press , and select Tools > Voice mail >
Options > Change number. Enter the number
(obtained from your service provider), and select OK.
1 To start a voice call, with the fold open, enter the phone
number in the standby mode, including the area code.
To remove a number, press
For international calls, press
.
To call a recently dialed number in the standby mode,
twice for the +
press
. Scroll to the number you want, and press
character (replaces the international access code), and
enter the country code, area code (omit the leading
zero if necessary), and phone number.
to call the number.
Make a conference call
1 Make a call to the first participant.
2 To make a call to another participant, select Options >
New call. The first call is automatically put on hold.
3 When the new call is answered, to join the first
participant in the conference call, select Options >
Conference.
2 Press
to call the number.
or close the cover to end the call (or to
3 Press
cancel the call attempt).
Pressing
always ends a call, even if another
application is active.
To make a call from Contacts, press , and select
Contacts. Scroll to the desired name, or enter the first
letters of the name to the search field. Matching contacts
To add a new person to the call, repeat step 2, and
select Options > Conference > Add to conference.
are listed. To call, press
. Select the call type Voice call.
Download from Www.Somanuals.com. All Manuals Search And Download.
57
Your device supports conference calls between a
maximum of six participants, including yourself.
To have a private conversation with one of the
participants, select Options > Conference > Private.
Select a participant, and select Private. The
conference call is put on hold on your device. The other
participants can still continue the conference call.
When you finish the private conversation, select
Options > Add to conference to return to the
conference call.
Voice dialing
Your device supports enhanced voice commands.
Enhanced voice commands are not dependent on the
speaker’s voice; you do not record voice tags in advance.
Instead, the device creates a voice tag for the entries in
contacts, and compares the spoken voice tag to it. The
voice recognition in the device adapts to the main user’s
voice to recognize the voice commands better.
The voice tag for a contact is the name or nickname that is
saved on the contact card. To listen to the synthesized
voice tag, open a contact card, and select Options > Play
voice tag.
To drop a participant, select Options > Conference >
Drop participant, scroll to the participant, and select
Drop.
4 To end the active conference call, press
.
Make a call with a voice tag
Note: Using voice tags may be difficult in a noisy
environment or during an emergency, so you should not
rely solely upon voice dialing in all circumstances.
Speed dial a phone number
To activate speed dialing, press , and select Tools >
Settings > Call > Speed dialling > On.
When you use voice dialing, the loudspeaker is in use. Hold
the device at a short distance away when you say the voice
tag.
To assign a phone number to one of the speed dialing keys
(
—
), press , and select Tools > Spd. dial. Scroll
to the key to which you want to assign the phone number,
1 To start voice dialing, in the standby mode, press and
and select Options > Assign.
mailbox.
is reserved for the voice
hold
. If you are using a compatible headset with
the headset key, press and hold the headset key to start
voice dialing.
To call in the standby mode, press the speed dial key and
.
Download from Www.Somanuals.com. All Manuals Search And Download.
58
2 A short tone is played, and Speak now is displayed. Say
clearly the name or nickname that is saved on the
contact card.
3 The device plays a synthesized voice tag for the
recognized contact in the selected device language,
and displays the name and number. After a timeout of
2.5 seconds, the device dials the number.
If the recognized contact was not correct, select Next
to view a list of other matches, or Quit to cancel voice
dialing.
To be able to make a video call, you must have a USIM card
of and subscription to video call services, contact your
service provider. A video call can only be made between
mobile phone or an ISDN client. Video calls cannot be
made while there is another voice, video, or data call
active.
Icons:
You are not receiving video (the recipient is not
sending video or the network is not transmitting it).
You have denied video sending from your device. To
send a still image instead, see ‘Call settings’, p. 105.
If several numbers are saved under the name, the device
selects the default number, if it has been set. Otherwise
the device selects the first available number of the
following: Mobile, Mobile (home), Mobile (business),
Telephone, Tel. (home), and Tel. (business).
1 To start a video call, with the fold open, enter the
phone number in the standby mode, or select Contacts
and a contact.
2 Select Options > Video call.
Video calls
You can make video calls in the fold-open mode and view
mode. See ‘Modes’, p. 11.
If you want to make a hands-free video call, activate the
view mode after the call recipient has answered the call.
Starting a video call may take a while. Waiting for video
image is shown. If the call is not successful (for example,
video calls are not supported by the network, or the
receiving device is not compatible) you are asked if you
want to try a normal call or send a message instead.
For hands-free video calls, use the view mode.
When you make a video call, you can see a real-time,
two-way video between you and the recipient of the call.
The live video image, or video image captured by the
camera in your device is shown to the video call recipient.
The video call is active when you see two video images,
and hear the sound through the loudspeaker. The call
Download from Www.Somanuals.com. All Manuals Search And Download.
59
recipient may deny video sending (
hear the sound and may see a still image or a grey
background graphic.
), in which case you
accepts the invitation, and you activate the correct mode.
See ‘Share video’, p. 61.
Video sharing requirements
Tip! To increase or decrease the volume during a call,
press
or
.
Because Video sharing requires a 3G UMTS connection,
your ability to use Video sharing depends on 3G network
availability. Contact your service provider for questions
about network availability and fees associated with using
this application. To use Video sharing you must do the
following:
To change between showing video or hearing only sound,
select Enable or Disable> Sending video, Sending audio,
or Sending audio & video.
To zoom your own image, select Zoom in or Zoom out.
The zoom indicator is shown on the top of the display.
•
•
•
Ensure that Video sharing is installed on your Nokia
N93.
Ensure that your device is set up for person-to-person
connections. See ‘Settings’, p.61.
Ensure you have an active UMTS connection and are
within UMTS network coverage. See ‘Settings’, p. 61. If
you start the sharing session while you are within
UMTS network coverage and a handover to GSM
occurs, the sharing session is discontinued, but your
voice call continues.
To switch the places of the sent and received video images
on the display, select Change image order.
Even if you have denied video sending during a video call,
the call will still be charged as a video call. Check the
pricing with your service provider.
To end the video call, press
.
Video sharing
Use Video sharing (network service) to send live video or
a video clip from your mobile device to another
compatible mobile device during a voice call. Simply invite
a recipient to view the live video, or a video clip you want
to share. Sharing begins automatically when the recipient
•
Ensure that both the sender and recipient are
registered to the UTMS network. If you invite someone
to a sharing session and that person’s phone is turned
off, or the person is not within UMTS network coverage,
they do not know that you are sending an invitation.
However, you receive an error message that the
recipient cannot accept the invitation.
Download from Www.Somanuals.com. All Manuals Search And Download.
60
•
Ensure that your device UMTS access point connection
settings are configured properly. For help, see
‘Connection’, p. 106.
Settings
Person-to-person connection settings
A person-to-person connection is also known as a session
initiation protocol (SIP) connection. The SIP profile settings
must be configured in your device before you can use
Video sharing. Setting up a SIP profile allows you to
establish a live person-to-person connection to another
compatible phone. The SIP profile must also be established
to receive a sharing session.
Share video
To receive a sharing session, the recipient must install
Video sharingand configure the required settings on their
mobile device. You and the recipient must both be
registered to the service before you can start sharing.
To receive share invitations, you must be registered to the
service, have an active UMTS connection, and be within
the UMTS network coverage.
Ask your service provider for the SIP profile settings, and
save them in your device. Your service provider may send
you the settings over the air.
Live video
If you know a recipient’s SIP address, you can enter it on
your contact card for that person. Open Contacts from
your device main menu, and open the contact card (or start
a new card for that person). Select Options > Add detail
> SIP. Enter the SIP address in the format
1 When a voice call is active, select Options > Share
video > Live.
2 The device sends the invitation to the SIP address you
have added to the contact card of the recipient.
If the recipient has several SIP addresses in the contact
card, select the SIP address to which you want to send
the invitation, and Select to send the invitation.
If the SIP address of the recipient is not available, enter
a SIP address. Select OK to send the invitation.
3 Sharing begins automatically when the recipient
accepts the invitation.
sip:username@domainname (you can use an IP address
instead of a domain name).
UTMS connection settings
To set up your UMTS connection, do the following:
•
Contact your service provider to establish an
agreement for you to use the UMTS network.
Download from Www.Somanuals.com. All Manuals Search And Download.
61
The loudspeaker is active. You can also use a
compatible headset to continue your voice call while
you share live video.
5 Select Pause to pause the sharing session. Select
Options > Continue to resume sharing.
6 To end the sharing session, select Stop. To end the voice
4 Select Pause to pause the sharing session. Select
call, press
.
Continue to resume sharing.
5 To end the sharing session, select Stop. To end the
Accept an invitation
voice call, press
.
When someone sends you a share invitation, an invitation
message is displayed showing the sender’s name or SIP
address. If your device is not set to Silent, it rings when
you receive an invitation.
Video clip
1 When a voice call is active, select Options > Share
video > Clip.
A list of video clips opens.
If someone sends you a share invitation and you are not
within UMTS network coverage, you will not know that
you received an invitation.
2 Select a video clip you want to share. A preview view
opens. To preview the clip, select Options > Play.
3 Select Options > Invite.
When you receive an invitation, you can select:
You may need to convert the video clip into a suitable
format to be able to share it. Clip must be converted
for sharing. Continue? appears. Select OK.
The device sends the invitation to the SIP address you
have added to the contact card of the recipient.
If the recipient has several SIP addresses in the contact
card, select the SIP address to which you want to send
the invitation, and Select to send the invitation.
If the SIP address of the recipient is not available,
enter a SIP address. Select OK to send the invitation.
4 Sharing begins automatically when the recipient
accepts the invitation.
Accept—to begin the sharing session. If the sender wants
to share live video, activate the view mode.
Reject—to decline the invitation. The sender receives a
message that you rejected the invitation. You can also
press
to decline the sharing session and disconnect
the voice call.
To end the sharing session, select Stop. If you share a video
clip, select Exit. Video sharing ended is displayed.
Download from Www.Somanuals.com. All Manuals Search And Download.
62
Tip! You can assign a ringing tone for video calls.
Answer or reject a call
Press
and select Tools > Profiles, a profile, and
To answer the call in the fold-open mode, press
. If
Answer if fold opened is set to On, to answer a call in the
fold-closed mode, open the fold, and the call starts
In the fold-open mode, press
to answer the video call.
To start sending video, activate the view mode, and a live
captured by the camera in your device is shown to the
camera unit to the direction from which you want to send
the video image. If you do not activate the view mode,
video sending is not possible, but you can still hear the
other person. A grey screen is shown in place of the video.
To replace the grey screen with a still image, see ‘Call
settings’, Image in video call, p. 105.
automatically. Otherwise, open the fold, and press
.
To mute the ringing tone when a call comes in, select
Silence.
Tip! If a compatible headset is connected to the
device, to answer and end a call, press the headset key.
If you do not want to answer a call, in the fold-open mode,
press
to reject it. The caller hears a line busy tone. If
you have activated the Call divert > If busy function to
divert calls, rejecting an incoming call also diverts the call.
See ‘Call divert’, p. 112.
Even if you have denied video sending during a video call,
the call is still charged as a video call. Check the pricing
with your service provider.
When you reject an incoming call with the fold open, you
can also send a text message to the caller informing why
you cannot answer the call. Select Options > Send msg..
You can edit the text before sending it. To set up this
option and write a standard text message, see ‘Call
settings’, p. 105.
To end the video call, in the view mode or with the fold
open, press
.
Call waiting
You can answer a call while you have another call in
progress if you have activated Call waiting (network
service) in Tools > Settings > Call > Call waiting.
Answer or reject a video call
When a video call arrives,
is displayed.
Download from Www.Somanuals.com. All Manuals Search And Download.
63
To answer the waiting call, press
on hold.
. The first call is put
Tip! You can add DTMF tones to the Phone number
or DTMF fields in a contact card.
To switch between the two calls, select Swap. Select
Options > Transfer to connect an incoming call or a call
on hold with an active call and to disconnect yourself
Options during a video call
Select Options during a video call for the following
options:
from the calls. To end the active call, press
. To end
both calls, select Options > End all calls.
Enable or Disable (audio in the fold-open mode; video,
audio, or both in view mode).
Options during a voice call
Many of the options that you can use during a voice call
are network services. Select Options during a call for the
available options on your device, including the following:
Activate handset (if a headset with Bluetooth
connectivity is attached).
Activate handsfree (fold-open mode only, and if a
compatible headset with Bluetooth connectivity is
attached).
Replace—To end an active call and replace it by answering
the waiting call.
End active call
Send MMS (in UMTS networks only)—To send an image or
a video in a multimedia message to the other participant
of the call. You can edit the message and change the
Change image order
Zoom in or Zoom out (view mode only).
recipient before sending. Press
compatible device.
to send the file to a
Log
Send DTMF—To send DTMF tone strings, for example, a
password. Enter the DTMF string or search for it in
Contacts. To enter a wait character (w) or a pause
character (p), press
tone.
repeatedly. Select OK to send the
Recent calls
To monitor the phone numbers of missed, received, and
dialed calls, press , and select My own > Log > Recent
Download from Www.Somanuals.com. All Manuals Search And Download.
64
calls. The device registers missed and received calls only if
the network supports these functions, the device is
switched on, and within the network service area.
To clear call duration timers, select Options > Clear
timers. For this you need the lock code; see ‘Security’,
‘Phone and SIM’, p. 109.
Tip! When you see a note in the standby mode about
missed calls, select Show to access the list of missed
calls. To call back, scroll to a name or number, and press
.
Packet data
To check the amount of data sent and received during
packet data connections, press , and select My own >
Log > Packet data. For example, you may be charged for
your packet data connections by the amount of data sent
and received.
To clear all recent call lists, select Options > Clear recent
calls in the recent calls main view. To clear one of the call
registers, open the register you want to erase, and select
Options > Clear list. To clear an individual event, open a
register, scroll to the event, and press
.
Monitor all communication events
Icons in Log:
Call duration
Incoming
Outgoing
Missed communication events
To monitor the approximate duration of your incoming and
outgoing calls, press , and select My own > Log > Call
duration.
To set the display of the call duration while a call is active,
select Connect. > Log > Options > Settings > Show call
duration > Yes or No.
Note: The actual time invoiced for calls by your
service provider may vary, depending on network
features, rounding off for billing, and so forth.
Download from Www.Somanuals.com. All Manuals Search And Download.
65
To monitor all voice and video
calls, text messages, or data
connections registered by the
device, press , select My
To erase the contents of the log, recent calls register, and
messaging delivery reports permanently, select Options >
Clear log. Select Yes to confirm. To remove a single event
from the log, press
.
own > Log, and press
to
To set the Log duration, select Options > Settings > Log
duration. The log events remain in the device memory for
a set number of days after which they are automatically
erased to free memory. If you select No log, all the log
contents, recent calls register, and messaging delivery
reports are permanently deleted.
select the general log. For each
communication event, you can
see the sender or recipient
name, phone number, name of
the service provider, or access
point. You can filter the
general log to view just one
type of event and create new contact cards based on the
log information.
To view the details of a communication event, in the
general log view, scroll to an event, and press
.
Tip! In the details view, to copy a phone number to
the clipboard, select Options > Copy Number.
Tip! To see the duration of a voice call on the main
display during an active call, select Options > Settings
> Show call duration > Yes.
Packet data counter and connection timer: To view how
much data, measured in kilobytes, is transferred and how
long a certain packet data connection lasts, scroll to an
incoming or outgoing event indicated by Pack., and select
Options > View details.
Tip! To view a list of sent messages, press , and
select Messaging > Sent.
Subevents, such as a text message sent in more than one
part and packet data connections, are logged as one
communication event. Connections to your mailbox,
multimedia messaging center, or web pages are shown as
packet data connections.
To filter the log, select Options > Filter and a filter.
Download from Www.Somanuals.com. All Manuals Search And Download.
66
Contacts (phonebook)
Press , and select Contacts. In Contacts you can add a
personal ringing tone or a thumbnail image to a contact
card. You can also create contact groups, which allow you
to send text messages or e-mail to many recipients at the
same time. You can add received contact information
(business cards) to contacts. See ‘Data and settings’, p. 49.
Contact information can only be sent to or received from
compatible devices.
Tip! To add and edit contact cards, use Nokia
Contacts Editor available in Nokia PC Suite.
To attach a small thumbnail image to a contact card, open
the contact card, and select Options > Edit > Options >
Add thumbnail. The thumbnail image is shown when the
contact calls.
Tip! Speed dialing is a quick way to call frequently
used numbers. You can assign speed dialing keys to
eight phone numbers. See ‘Speed dial a phone number’,
p. 58.
Save names and numbers
1 Select Options > New contact.
Tip! To send contact information, select the card you
want to send. Select Options > Send > Via text
message, Via multimedia, Via Bluetooth, or Via
infrared. See ‘Messaging’, p. 44 and ‘Send data’, p. 85.
2 Fill in the fields that you want, and select Done.
To edit contact cards in Contacts, scroll to the contact
card you want to edit, and select Options > Edit.
To add a contact to a group, select Options > Add to
group: (shown only if you have created a group). See
‘Create contact groups’, p. 69.
Tip! To print contact cards on a compatible basic print
profile (BPP) equipped printer with Bluetooth
connectivity (such as HP Deskjet 450 Mobile Printer or
HP Photosmart 8150), select Options > Print.
To view the amount of contacts, groups, and the available
memory in Contacts, select Options > Contacts info.
To delete a contact card in Contacts, select a card, and
press . To delete several contact cards at the same time,
press
and
to mark the contacts, and press to
delete.
Download from Www.Somanuals.com. All Manuals Search And Download.
67
Tip! You can synchronize your contacts to a
compatible PC with Nokia PC Suite.
Default numbers and addresses
You can assign default numbers or addresses to a contact
card. In this way if a contact has several numbers or
addresses, you can easily call or send a message to the
contact to a certain number or address. The default
number is also used in voice dialing.
SIM directory and services
For availability and information on using SIM card services,
contact your SIM card vendor. This may be the service
provider or other vendor.
1 In the address book, select a contact, and press
.
2 Select Options > Defaults.
Press
, and select Contacts > Options > SIM
3 Select a default to which you want to add a number or
contacts > SIM directory to see the names and numbers
stored on the SIM card. In the SIM directory you can add,
edit, or copy numbers to contacts, and you can make calls.
an address, and select Assign.
4 Select a number or an address you want to set as a
default.
To view the list of fixed dialing numbers, select Options >
SIM contacts > Fixed dialling contacts. This setting is
only shown if supported by your SIM card.
The default number or address is underlined in the contact
card.
To restrict calls from your device to selected phone
numbers, select Options > Activ. fixed dialling. To add
new numbers to the fixed dialing list, select Options >
New SIM contact. You need the PIN2 code for these
functions.
Copy contacts
To copy names and numbers from a SIM card to your
device, press
, and select Contacts > Options > SIM
contacts > SIM directory. Select the names you want to
When you use Fixed dialling, packet data connections are
not possible, except when sending text messages over a
packet data connection. In this case, the message center
number and the recipient’s phone number must be
included on the fixed dialing list.
copy and Options > Copy to Contacts.
To copy contacts to your SIM card, press
, and select
Contacts. Select the names you want to copy and
Options > Copy to SIM direct., or Options > Copy > To
SIM directory. Only the contact card fields supported by
your SIM card are copied.
Download from Www.Somanuals.com. All Manuals Search And Download.
68
When fixed dialing is activated, calls may be possible to
the official emergency number programmed into your
device.
5 Scroll to a contact, and press
to mark it. To add
multiple members at a time, repeat this action on all
the contacts you want to add.
6 Select OK to add the contacts to the group.
To rename a group, select Options > Rename, enter the
Add ringing tones for contacts
When a contact or group member calls you, the device
plays the chosen ringing tone (if the caller’s telephone
number is sent with the call and your device recognizes it).
new name, and select OK.
Remove members from a group
1 In the groups list, open the group you want to modify.
2 Scroll to the contact, and select Options > Remove
from group.
1 Press
to open a contact card or go to the groups list,
and select a contact group.
2 Select Options > Ringing tone. A list of ringing tones
opens.
3 Select Yes to remove the contact from the group.
3 Select the ringing tone you want to use for the
Tip! To check to which groups a contact belongs,
scroll to the contact, and select Options > Belongs to
groups.
individual contact or the selected group.
To remove the ringing tone, select Default tone from the
list of ringing tones.
Create contact groups
1 In Contacts, press
to open the groups list.
2 Select Options > New group.
3 Write a name for the group or use the default name
Group N, and select OK.
4 Open the group, and select Options > Add members.
Download from Www.Somanuals.com. All Manuals Search And Download.
69
Services
Various service providers maintain pages specifically
designed for mobile devices. These pages use the wireless
markup language (WML), extensible hypertext markup
language (XHTML), or hypertext markup language (HTML).
Enter settings manually
1 Press , select Tools > Settings > Connection >
Access points, and define the settings for an access
point. Follow the instructions given to you by your
service provider. See ‘Connection’, p. 106.
Check the availability of services, pricing, and fees with
your service provider. Service providers will also give you
instructions on how to use their services.
2 Press
, and select Services > Options > Bookmark
manager > Add bookmark. Write a name for the
bookmark and the address of the page defined for the
current access point.
Press
, and select Services.
3 To set the created access point as the default access
Shortcut: To start a connection, press and hold
in the standby mode.
point, select Options > Settings > Access point.
Bookmarks view
Web access point
The bookmarks view opens when you open Services.
To access pages, you need web service settings for the
page that you want to use. You may receive the settings
in a special text message from the service provider that
offers the web page. See ‘Data and settings’, p. 49. For
more information, contact your service provider.
Your device may have some bookmarks loaded for sites not
affiliated with Nokia. Nokia does not warrant or endorse
these sites. If you choose to access them, you should take
the same precautions, for security or content, as you would
with any internet site.
Tip! Settings may be available on the website of your
service provider.
indicates the starting page defined for the default
access point.
Download from Www.Somanuals.com. All Manuals Search And Download.
70
On a browser page, new links appear underlined in blue
and previously visited links in purple. Images that act as
links have a blue border around them.
Connection security
If the security indicator
is displayed during a
connection, the data transmission between the device and
the internet gateway or server is encrypted.
To open links and make selections, press
Shortcut: Press to jump to the end of a page,
and to the beginning of a page.
.
The security icon does not indicate that the data
transmission between the gateway and the content server
(or place where the requested resource is stored) is secure.
The service provider secures the data transmission
between the gateway and the content server.
Back is not available, select Options > Navigation
options > History to view a chronological list of the pages
you visited during a browsing session.
Select Options > Details > Security to view details about
the connection, encryption status, and information about
server and user authentication.
To retrieve the latest content from the server, select
Options > Navigation options > Reload.
To save a bookmark, select Options > Save as bookmark.
Security certificates may be required for some services,
such as banking services. For more information, contact
your service provider. See also ‘Certificate management’,
p. 110.
Tip! To access the bookmarks view while browsing,
press and hold
. To return to the browser view,
select Options > Back to page.
To save a page while browsing, select Options >
Advanced options > Save page. You can save pages to
the device memory or a compatible memory card (if
inserted), and browse them when offline. To access the
Browse
Important: Use only services that you trust and that
offer adequate security and protection against harmful
software.
pages later, press
in the bookmarks view to open the
Saved pages view.
To download a page, select a bookmark, or enter the
address in the field ( ).
To enter a new URL address, select Options > Navigation
options > Go to web address.
Download from Www.Somanuals.com. All Manuals Search And Download.
71
You can download files that cannot be shown on the
browser page, such as ringing tones, images, operator
logos, themes, and video clips. To download an item, scroll
Important: Only install and use applications and
other software from trusted sources, such as applications
that are Symbian Signed or have passed the Java
VerifiedTM testing.
to the link, and press
.
When you start a download, a list of ongoing, paused, and
completed downloads from the current browsing session
is displayed. To view the list, select Options > Tools >
Downloads. In the list, scroll to an item, and select
Options to pause, resume, or cancel ongoing downloads,
or open, save, or delete completed downloads.
1 To download the item, scroll to the link, and press
2 Select the appropriate option to purchase the item, for
example, “Buy”.
3 Carefully read all the information provided.
To continue the download, select Accept. To cancel the
download, select Cancel.
.
Copyright protections may prevent some images, music
(including ringing tones), and other content from being
copied, modified, transferred or forwarded.
End a connection
To end the connection and view the browser page offline,
select Options > Advanced options > Disconnect, or to
end the connection and close the browser, select
Options > Exit.
Important: Only install and use applications and
other software from trusted sources, such as applications
that are Symbian Signed or have passed the Java
VerifiedTM testing.
Empty the cache
The information or services you have accessed are stored in
the cache memory of the device.
Download and purchase items
You can download items such as ringing tones, images,
operator logos, themes, and video clips. These items can
be provided free, or you can purchase them. Downloaded
items are handled by the respective applications in your
device, for example, a downloaded photo can be saved in
Gallery.
A cache is a memory location that is used to store data
temporarily. If you have tried to access or have accessed
confidential information requiring passwords, empty the
cache after each use. The information or services you have
Download from Www.Somanuals.com. All Manuals Search And Download.
72
accessed are stored in the cache. To empty the cache,
select Options > Advanced options > Clear cache.
Search page—Define a web page that is downloaded
when you select Navigation options > Open search page
in the bookmarks view, or when browsing.
Web settings
embedded on web pages, select a volume level.
Select Options > Settings and from the following:
Rendering—If you want the page layout shown as
select By quality. If you do not want external cascading
style sheets to be downloaded, select By speed.
Access point—Change the default access point. See
‘Connection’, p. 106. Some or all access points may be
preset for your device by your service provider, and you
may not be able to change, create, edit, or remove them.
Cookies—Enable or disable the receiving and sending of
cookies.
Load imgs. & sounds—Select whether you want to load
images while browsing. If you select No, to load images
later during browsing, select Options > Show images.
Java/ECMA script—Enable or disable the use of scripts.
Security warnings—Hide or show security notifications.
Font size—Select the text size.
Conf. DTMF sending—Select whether you want to
confirm before the device sends DTMF tones during a
voice call. See also ‘Options during a voice call’, p. 64.
Default encoding—If text characters are not shown
correctly, you can select another encoding according to
language.
Auto. bookmarks—Enable or disable automatic bookmark
collecting. If you want to continue collecting automatic
bookmarks but hide the folder from the bookmarks view,
select Hide folder.
Screen size—Select what is shown when you are browsing:
Select. keys only or Full screen.
Homepage—Define the home page.
Download from Www.Somanuals.com. All Manuals Search And Download.
73
Calendar
Use Calendar to remind you of meetings, anniversaries,
and to keep track of your tasks and other notes.
Anniversary—to remind you of birthdays or special
dates (entries are repeated every year)
To-do—to remind you of a task that needs doing by a
specific date
Create calendar entries
2 Fill in the fields. To set an alarm, select Alarm > On,
and enter the Alarm time and Alarm date.
To add a description for an appointment or a meeting,
select Options > Add description.
Shortcut: In the day, week, or month calendar view,
press any key (
—
). An appointment entry opens,
and the characters you enter are added to the Subject
field. In the to-do view, a to-do note entry opens.
3 To save the entry, select Done.
When the calendar alarms for a note, select Silence to turn
off the calendar alarm tone. The reminder text stays on the
screen. To end the calendar alarm, select Stop. To set the
alarm to snooze, select Snooze.
1 Press
, and select
Calendar > Options >
New entry and one of
the following:
Meeting—to remind you
of an appointment that
has a specific date and
time
Tip! You can synchronize your calendar with a
compatible PC using Nokia PC Suite. When creating a
calendar entry, set the desired Synchronisation option.
Meeting request—to
send a meeting request
by e-mail (a mailbox
must be defined in the
device)
Meeting requests
If you receive a meeting request to the mailbox in your
device, the request is saved to the calendar when you open
the e-mail.
Memo—to write a general entry for a day
Download from Www.Somanuals.com. All Manuals Search And Download.
74
You can view received meeting requests in the mailbox or
in the calendar. To respond to a meeting request using
e-mail, select Options > Respond:.
Manage your calendar entries
Deleting past entries in Calendar saves space in your
device memory.
To delete more than one event at a time, go to the month
view, and select Options > Delete entry > Before date or
All entries.
Calendar views
Tip! Select Options > Settings to change the starting
day of the week or the view that is shown when you
open the calendar.
To mark a task as completed, scroll to it in the to-do view,
and select Options > Mark as done.
In the month view, dates that have calendar entries are
marked with a small triangle in the bottom right corner. In
the week view, memos and anniversaries are placed before
8 a.m. To switch between the month view, week view, day
Calendar settings
To modify Calendar alarm tone, Default view, Week
starts on, and Week view title, select Options >
Settings.
view, and to-do view, press
To go to a certain date, select Options > Go to date. To
jump to today, press
.
.
To send a calendar note to a compatible device, select
Options > Send.
To print calendar entries on a compatible basic print profile
(BPP) equipped printer with Bluetooth connectivity (such
as HP Deskjet 450 Mobile Printer or HP Photosmart 8150),
select Options > Print.
Download from Www.Somanuals.com. All Manuals Search And Download.
75
My own
If you do not have access to the Visual Radio service, the
operators and radio stations in your area may not support
Visual Radio.
Visual Radio
You can use Visual Radio (network service) as
a traditional FM radio with automatic tuning
The FM radio depends on an antenna other than the
wireless device antenna. A compatible headset or
enhancement needs to be attached to the device for the
FM radio to function properly.
and saved stations. If you tune to stations that offer Visual
Radio service, you can view visual information on the
display related to the radio program. The Visual Radio
service uses packet data (network service). You can listen
to the FM radio while using other applications.
You can listen to the radio with the built-in loudspeaker or
a compatible headset. When using the loudspeaker, keep
the headset plugged in the device. The lead of the headset
functions as the antenna of the radio, so let it hang freely.
To use the Visual Radio service, the following conditions
are required:
•
•
•
The device must be switched on.
Warning: Listen to music at a moderate level.
Continuous exposure to high volume may damage your
hearing. Do not hold the device near your ear when the
loudspeaker is in use, because the volume may be
extremely loud.
The device must have a valid SIM card inserted.
The station you listen to and the network operator or
the wireless service provider you use must support this
service.
An internet access point must be defined to access the
service provider’s Visual Radio server. See ‘Access
points’, p. 106.
The station must have the correct Visual Radio service
ID defined and Visual Radio service enabled. See
‘Saved stations’, p. 78.
•
•
You can make a call or answer an incoming call while
listening to the radio. The radio is turned off when there is
an active call. When the call is finished, the radio is turned
back on.
The radio selects the used frequency band based on the
country information received from the network.
Download from Www.Somanuals.com. All Manuals Search And Download.
76
Visual Radio can be used for listening when the device
cover is closed. Channel information may be displayed on
the cover display. To mute or unmute the radio, press
To save the current tuned
station to your station list,
select Options > Save
.
station. To open the list of
your saved stations, select
Options > Stations. See
‘Saved stations’, p. 78.
Listen to the radio
Note that the quality of the radio broadcast depends on
the coverage of the radio station in that particular area.
To return to the standby
mode and leave the FM radio
playing in the background,
select Options > Play in
Connect a compatible headset to the device. The lead of
the headset functions as the radio antenna, so let it hang
freely. Press
, and select My own > Radio.
background, or press
.
To start a station search, select
or . Searching
stops when a station is found. To change the frequency
manually, select Options > Manual tuning.
View visual content
To check availability and costs, and to subscribe to the
service, contact your service provider.
If you have previously saved radio stations, select
to go to the next or previous saved station. To select
the memory location of a station, press the corresponding
number key.
or
To view available visual content for a tuned station, select
, or in the stations view, select Options > Station >
Start visual service. If the visual service ID has not been
saved for the station, enter it, or select Retrieve to search
for it in the station directory (network service).
To adjust the volume, press
or . To listen to the radio
using the loudspeaker, select Options > Activate
loudspeaker.
To view available stations based on location, select
Options > Station directory (network service).
When the connection to the visual service is established,
the display shows the current visual content designed by
the content provider.
Download from Www.Somanuals.com. All Manuals Search And Download.
77
To adjust display settings for the visual content view,
select Options > Display settings > Lighting or Power
saver time-out.
RealPlayer
Press
, and select My own > RealPlayer. With
Saved stations
You can save up to 20 radio stations in Visual Radio. To
open your station list, select Options > Stations.
RealPlayer, you can play video clips or stream media files
over the air. You can activate a streaming link when you
browse web pages, or store it in the device memory or a
compatible memory card (if inserted).
To listen to a saved station, select Options > Station >
Listen. To view available visual content for a station with
Visual Radio service, select Options > Station > Start
visual service.
Tip! You can also view video clips or streaming links in
your device with other compatible UPnP devices, such
as a TV or a PC, through wireless LAN. See ‘View media
files’, p. 90.
To change station details, select Options > Station >
Edit.
RealPlayer supports files with extensions such as .3gp,
.mp4, or .rm. However, RealPlayer does not necessarily
support all file formats or all the variations of file formats.
For example, RealPlayer attempts to open all .mp4 files,
but some .mp4 files may include content that is not
compliant with 3GPP standards and, therefore, is not
supported by this device.
Settings
Select Options > Settings and from the following:
Start-up tone—To select whether a tone is played when
the application is started.
Auto-start service—To have the Visual Radio service start
automatically when you select a saved station that offers
visual service, select Yes.
Play video clips
1 To play a media file stored in device memory or on a
compatible memory card (if inserted), select Options >
Open and from the following:
Access point—To select the access point used for the data
connection. You do not need an access point to use the
application as an ordinary FM radio.
Most recent clips—to play one of the last six files
played in RealPlayer
Download from Www.Somanuals.com. All Manuals Search And Download.
78
Saved clip—to play a file saved in Gallery
begins streaming, your device connects to the site and
starts loading the content. The content is not saved in
your device.
See ‘Gallery’, p. 30.
2 Scroll to a file, and press
Tip! To view a video clip in full screen mode,
Receive RealPlayer settings
You may receive RealPlayer settings in a special text
message from the service provider. See ‘Data and settings’,
p. 49. For more information, contact your service provider.
press
. Press again to change back to normal screen
mode.
Shortcuts during play are as follows:
•
•
•
To fast forward, press and hold
To rewind through the media file, press and hold
To mute the sound, press and hold until is
displayed. To turn on the sound, press and hold
until you see
.
.
Change the RealPlayer settings
Select Options > Settings and from the following:
Video—to have RealPlayer automatically repeat video
clips after they finish playing
.
Stream content over the air
Many service providers require you to use an IAP for your
default access point. Other service providers allow you to
use a WAP access point.
Connection—to select whether to use a proxy server,
change the default access point, and set the port range
used when connecting. Contact your service provider for
the correct settings.
Proxy sett.:
The access points may be configured when you first start
your device.
Use proxy—To use a proxy server, select Yes.
Contact your service provider for more information.
Proxy serv. address—Enter the IP address of the proxy
server.
In RealPlayer, you can only open an rtsp:// URL address.
However, RealPlayer recognizes an http link to a .ram file. Proxy port number—Enter the port number of the proxy
server.
To stream content over the air, select a streaming link
saved in Gallery, on a web page, or received in a text
message or multimedia message. Before live content
Glossary: Proxy servers are intermediate servers between
media servers and their users. Some service providers
Download from Www.Somanuals.com. All Manuals Search And Download.
79
use them to provide additional security or speed up
access to browser pages that contain sound or video
clips.
To open a folder or play a flash file, scroll to it, and press
.
To send a flash file to a compatible device, scroll to it, and
Netw. sett.—
press
.
• Default access point—Scroll to the access point you
want to use to connect to the internet, and press
• Online time—Set the time for RealPlayer to
To copy a flash file to another folder, select Organise >
.
Copy to folder.
To move a flash file to another folder, select Organise >
Move to folder
disconnect from the network when you pause a media
clip playing through a network link. Select User
defined, and press
. Enter the time, and select OK. To create a folder to organize your flash files, select
• Lowest UDP port—Enter the lowest port number of
the server’s port range. The minimum value is 1024.
• Highest UDP port—Enter the highest port number of
the server’s port range. The maximum value is 65535.
Organise > New folder.
The available options may vary.
To delete a flash file, scroll to it, and press
.
Select Options > Advanced settings to edit the
bandwidth values for different networks.
Play flash files
Press
flash file, and press
, and select My own > Flash Player. Scroll to a
.
Flash Player
Select Options and from the following:
Pause—Pause the playback
With Flash Player, you can view, play, and interact with
flash files made for mobile devices.
Stop—Stop the playback
Volume—Adjust the playback volume. To increase or
decrease the volume scroll left or right
Organize flash files
Press
, and select My own > Flash Player.
Download from Www.Somanuals.com. All Manuals Search And Download.
80
Quality—Select the playback quality. If the playback
appears uneven and slow, change the Quality setting to
Normal or Low.
select Options > Create muvee; or open the Images &
video folder in Gallery. Select the video clips and
images you with which you want to create a muvee,
and select Options > Edit > Create muvee.
2 Select a style for the muvee from the style list. Movie
director uses the music and text associated with the
chosen style.
Full screen —Play the file using the entire display. To
return to the normal screen, select Normal screen. Even
though not visible in full screen, the key functions may still
be available when you press either key below the display.
3 Select Create muvee.
Fit to screen—Play the file in its original size after
zooming it
The muvee is created automatically, and a Preview view is
displayed. You can select Save to save the muvee in the
Gallery, Recreate to shuffle the media files and create a
new muvee, or Back to select a different style for your
muvee. You can also select Customise to change the
muvee settings and create a custom muvee to which you
can add images, music, and text.
Pan mode on—Move around the display with the scroll key
when you have zoomed in
The available options may vary.
Movie director
Create a custom muvee
Press
, and select My own > Movie, or launch it from
1 In the Movie director main view, select the videos and
images with which you want to create a muvee, and
select Options > Create muvee; or select the Images
& video folder in Gallery. Select the videos and images
with which you want to create a muvee, and select
Options > Edit > Create muvee.
the gallery. Muvees are styled video clips that can contain
videos, images, music, and text. The style determines the
transitions, visual effects, graphics, music, and text that
are used in the muvee.
2 Select a style for the muvee from the style list. In the
style view, select Options > Customise and from the
following:
Create muvees
1
In the Movie director main view, select the videos and
images with which you want to create a muvee, and
Videos & Images—select from the following:
Download from Www.Somanuals.com. All Manuals Search And Download.
81
• Add/Remove—Add or remove video clips and
images or Add/Remove > Capture to open the
camera application to capture new video clips and
images
• Move—Reorder the position of video clips and
images in the custom muvee
gallery, Recreate to shuffle the media files and create a
new muvee, or Customise to return to the muvee settings.
Games
Press
, and select My own and a game. For instructions
• Select contents—Select video segments to include
or exclude in the muvee
on how to play the game, select Options > Help.
Length—to define the duration of the muvee, select
User defined. Select Multimedia message, Same as
music or Auto-select. If the muvee duration is less
than the music duration, the muvee is repeated to
match the music duration. If the muvee duration is
longer than the music duration, the music is repeated
to match the muvee duration.
Music—to select a music clip from the list.
Message—to edit the Opening message and Closing
message.
Settings—to change the settings for muvee
production. Select from the following:
• Memory in use—Select where to store your muvees
• Resolution—Select the resolution of your muvees
• Default muvee name—Set a default name for the
muvees
3 Select Create muvee.
The muvee is created automatically, and Preview
displayed. You can select Save to save the muvee in the
Download from Www.Somanuals.com. All Manuals Search And Download.
82
Connectivity
PC connections
Data cable
You need to connect your device to a compatible PC to do
the following:
Press
, and select Connect. > Data cbl. > Media
•
Transfer information between Nokia PC Suite
applications and your device. For example, to
synchronize calendar appointments or transfer images.
Use your device as a modem to connect to network
services such as the internet.
player, PC Suite, Mass storage, or Image print. To have
the device ask the purpose of the connection each time
the cable is connected, select Ask on connection.
•
Bluetooth connectivity
You can connect your device and a compatible PC via a
compatible USB or serial cable, Infrared, or Bluetooth
wireless technology.
You can connect wirelessly to other compatible devices
with wireless Bluetooth technology. Compatible devices
may include mobile phones, computers, and
Detailed installation instructions can be found in the user
guide for Nokia PC Suite.
enhancements such as headsets and car kits. You can use
Bluetooth connectivity to send images, video clips, music
and sound clips, and notes; connect wirelessly to your
compatible PC (for example, to transfer files); and connect
to a compatible printer to print images with Image print.
See ‘Image print’, p. 42.
Tip! When using Nokia PC Suite for the first time, to
connect your device to a compatible PC and to use
Nokia PC Suite, use the Get Connected wizard available
in Nokia PC Suite.
Since devices with Bluetooth technology communicate
using radio waves, your device and the other device do not
need to be in direct line-of-sight. The two devices only
Download from Www.Somanuals.com. All Manuals Search And Download.
83
need to be within 10 meters (33 feet) of each other, but
the connection may be subject to interference from
obstructions such as walls or from other electronic
devices.
features, increase the demand on battery power and
reduce the battery life.
When the device is locked, you cannot use Bluetooth
connectivity. See ‘Security’, p. 109 for more information on
locking the device.
This device is compliant with Bluetooth Specification 2.0
supporting the following profiles: Basic Printing Profile,
Generic Access Profile, Serial Port Profile, Dial-up
Networking Profile, Headset Profile, Hands-Free Profile,
Generic Object Exchange Profile, Object Push Profile, File
Transfer Profile, Basic Imaging Profile, SIM Access Profile,
and Human Interface Device Profile. To ensure
interoperability between other devices supporting
Bluetooth technology, use Nokia approved enhancements
for this model. Check with the manufacturers of other
devices to determine their compatibility with this device.
Settings
Press
, and select Connect. > Bluetooth. When you
open the application for the first time, you are asked to
define a name for your device. After you set Bluetooth
connectivity on and change My phone's visibility to
Shown to all, your device and this name can be seen by
other users with devices using Bluetooth technology.
Select from the following:
Glossary: A profile corresponds to a service or a
function, and defines how different devices connect.
For example, the Hands-Free Profile is used between
the handsfree device and the phone. For devices to be
compatible, they must support the same profiles.
Bluetooth—Select On or Off. To connect wirelessly to
another compatible device, first set Bluetooth connectivity
On, then establish a connection.
My phone's visibility—To allow your device to be found by
other devices with Bluetooth technology, select Shown to
all. To hide it from other devices, select Hidden.
There may be restrictions on using Bluetooth technology
in some locations. Check with your local authorities or
service provider.
My phone's name—Edit the name of your device.
Remote SIM mode—To enable another device, such as a
compatible car kit enhancement, to use the SIM card in
your device to connect to the network, select On.
Features using Bluetooth technology, or allowing such
features to run in the background while using other
Download from Www.Somanuals.com. All Manuals Search And Download.
84
Remote SIM mode
Security tips
To use the remote SIM mode with a compatible car kit
enhancement, set Bluetooth connectivity on, and enable
the use of the remote SIM mode with your device. Before
the mode can be activated, the two devices must be paired
and the pairing initiated from the other device. When
pairing, use a 16-digit passcode, and set the other device
as authorized. See ‘Pair devices’, p. 86. Activate the remote
SIM mode from the other device.
When you are not using Bluetooth connectivity, select
Bluetooth > Off or My phone's visibility > Hidden. In
this way, you can better control who can find your device
with Bluetooth wireless technology, and connect to it.
Do not pair with or accept connection requests from an
unknown device. In this way, you can better protect your
device from harmful content.
When the remote SIM mode is on in your Nokia device,
Remote SIM is displayed in the standby mode. The
connection to the wireless network is turned off, as
Send data
Several Bluetooth connections can be active at a time. For
example, if you are connected to a headset, you can also
transfer files to another compatible device at the same
time.
indicated by
in the signal strength indicator area, and
you cannot use SIM card services or features requiring
cellular network coverage. However, a wireless LAN
connection remains active during the remote SIM mode.
Bluetooth connectivity indicators
•
•
•
When
connectivity is on.
When
with another device.
is shown in the standby mode, Bluetooth
Warning: In the remote SIM mode, you cannot
make or receive any calls with your device, except make
calls to certain emergency numbers, or use other
features that require network coverage. To make calls,
you must first exit the remote SIM mode. If the device
has been locked, enter the lock code.
is blinking, your device is trying to connect
When
is shown continuously, data is being
transmitted using Bluetooth connectivity.
1 Open the application where the item you want to send
is stored. For example, to send an image to another
compatible device, open Gallery.
To exit the remote SIM mode, press
rem. SIM mode.
, and select Exit
Download from Www.Somanuals.com. All Manuals Search And Download.
85
2 Select the item and Options > Send > Via Bluetooth.
Devices with Bluetooth technology within range start
to appear on the display.
To pair with a device, select Options > New paired device.
Devices with wireless Bluetooth technology within range
start to appear on the display. Select the device, and enter
the passcode. The same passcode must be entered on the
other device as well. After pairing, the device is saved to
the paired devices view.
Device icons are:
video device, and
computer, phone,
other device.
audio or
To interrupt the search, select Stop.
3 Select the device with which you want to connect.
4 If the other device requires pairing before data can be
transmitted, a tone sounds, and you are asked to enter
a passcode. See ‘Pair devices’, p. 86.
Paired devices are indicated by
in the device search.
To set a device as authorized or unauthorized, scroll to a
device, and select from the following options:
5 When the connection has been established, Sending
Set as authorised—Connections between your device and
this device can be made without your knowledge. No
separate acceptance or authorization is needed. Use this
status for your own devices, such as your compatible
headset or PC, or devices that belong to someone you trust.
indicates authorized devices in the paired devices view.
data is shown.
The Sent folder in Messag. does not store messages sent
using Bluetooth connectivity.
Tip! When searching for devices, some devices may
show only the unique address (device address). To find
the unique address of your device, enter the code
*#2820# in the standby mode.
Set as unauthorised—Connection requests from this
device must be accepted separately every time.
To cancel a pairing, scroll to the device, and select
Options > Delete. If you want to cancel all pairings, select
Options > Delete all.
Pair devices
To open the paired devices view (
application main view, press
), in the Bluetooth
Tip! If you are currently connected to a device and
delete the pairing with that device, pairing is removed
immediately, and the connection is switched off.
.
Before pairing, create your own passcode (1–16 digits),
and agree with the owner of the other device to use the
same code. Devices that do not have a user interface have
a factory-set passcode. The passcode is used only once.
Download from Www.Somanuals.com. All Manuals Search And Download.
86
preferable distance between the two devices is up to
1 meter (3 feet).
Receive data
When you receive data through Bluetooth connectivity, a
tone sounds, and you are asked if you want to accept the
2 The user of the receiving device activates the infrared
port.
message. If you accept,
is shown, and the item is
To activate the infrared port of your device to receive
through Bluetooth connectivity are indicated by . See
‘Inbox—receive messages’, p. 49.
data through infrared, press
, and select
Connect. > Infrared.
3 The user of the sending device selects the desired
infrared function to start the data transfer.
To send data through infrared, locate the desired file in
an application or the file manager, and select
Options > Send > Via infrared.
Switch off
To switch off Bluetooth connectivity, select Bluetooth >
Off.
If data transfer is not started within 1 minute after the
activation of the infrared port, the connection is cancelled
and must be started again.
Infrared connection
All items received through infrared are placed in the Inbox
folder in Messaging. New infrared messages are indicated
With infrared, you can transfer data such as business
cards, calendar notes, and media files with a compatible
device.
by
.
When
blinks, your device is trying to connect to the
other device or a connection has been lost.
Do not point the infrared (IR) beam at anyone's eye or
allow it to interfere with other IR devices. This device is a
Class 1 laser product.
When is shown continuously, the infrared
connection is active, and your device is ready to send and
receive data using its infrared port.
Send and receive data using infrared
1 Ensure that the infrared ports of the sending and
receiving devices are pointing at each other, and that
there are no obstructions between the devices. The
Download from Www.Somanuals.com. All Manuals Search And Download.
87
Important: Always use one of the available
encryption methods to increase the security of your
wireless LAN connection and reduce the risk of
unauthorize access to your data.
Home network
Your device is compatible with UPnP. Using a
wireless LAN access point device or a wireless
LAN router, you can create a home network and connect
compatible UPnP devices that support wireless LAN to the
network, such as your Nokia device, a compatible PC, a
compatible printer, and a compatible sound system or a
TV, or a sound system or TV equipped with a compatible
wireless multimedia receiver.
Your device is connected to the home network only if you
accept a connection request from another device, or in
Gallery, select the option to view, play, print, or copy
media files on your Nokia device or search for other devices
in the Home net. folder.
Using the wireless LAN function of the Nokia N93 in a
home network requires a working wireless LAN home
connection setup and the other target home devices to be
UPnP enabled and to be connected to the same home
network.
Important security information
When you configure your wireless LAN home network,
enable an encryption method, first on your access point
device, then on the other devices you intend to connect to
your home network. Refer to the documentation of the
devices. Keep any passcodes secret and in a safe place
separate from the devices.
The home network uses the security settings of the
wireless LAN connection. Use the home network feature
in a wireless LAN infrastructure network with a wireless
LAN access point device and encryption enabled.
To view or change the settings of the wireless LAN Internet
access point in your Nokia device, see ‘Access points’, p.
106.
You can share media files saved in Gallery with other
compatible UPnP devices using the home network. To
If you use the ad hoc operating mode to create a home
network with a compatible device, enable one of the
encryption methods in WLAN security mode when you
configure the Internet access point. This step reduces the
risk of an unwanted party joining the ad hoc network.
manage the settings for Home net. , press
, and select
Connect. > Home net. You can also use the home
network to view, play, copy, or print compatible media
files from Gallery. See ‘View media files’, p. 90.
Download from Www.Somanuals.com. All Manuals Search And Download.
88
Your device notifies you if another device attempts to
connect to it and the home network. Do not accept
connection requests from an unknown device.
The options related to Home net. are not available in
configured.
If you use wireless LAN in a network that does not have
encryption, switch off sharing Nokia N93 files with other
devices, or do not share any private media files. To change
sharing settings, see ‘Home network settings’, p. 89.
Configure settings
To configure Home net., select Connect. > Home net. >
Settings and from the following:
Home access point—Select Always ask if you want the
device to ask for the home access point every time you
connect to the home network, User defined to select your
home Internet access point that is used automatically
when you use Home net., or None. If your home network
does not have wireless LAN security settings enabled, you
get a security warning. You can continue and switch on
the wireless LAN security later; or cancel defining the
access point, and first switch on the wireless LAN security.
See Wireless LAN in ‘Access points’, p. 106.
UPnP wizard
When you access the home network application for the
first time, the setup wizard opens, and helps you to define
the home network settings for your device. To use the
setup wizard later, in the home network main view, select
Options > Run wizard, and follow the instructions on the
display.
To connect a compatible PC to the home network, on the
PC, you must install the Home Media Server software from
the DVD-ROM supplied with your device.
Device name— Enter a name for your device that is shown
to the other compatible devices in the home network.
Set sharing on and define content
Home network settings
Select Connect. > Home net. > Share content.
To share media files saved in Gallery with other compatible
UPnP devices through a wireless LAN, you must create and
configure your wireless LAN home IAP; then configure
Home net.. See ‘Wireless LAN’, p. 17.
Content sharing—Allow or deny sharing media files with
compatible devices.
Important: Do not set Content sharing on before
you have configured all the other settings. If you set
Content sharing on, the other UPnP compatible devices in
Download from Www.Somanuals.com. All Manuals Search And Download.
89
the home network can view and copy your files you have
selected for sharing in the Images & video and Music
folders.
1 In Gallery, select an image, a video clip, or a sound clip.
2 Select Options > Show via home net.
3 Select a compatible device in which the media file is
shown. The images are shown both in the other home
network device and your device, and the video clips and
sound clips are played only in the other device.
To select media files for sharing with other devices from
the Images & video and Music folders or to view the
sharing status of Images & video or Music, select Share
content.
Media files stored in the other device
To select media files that are stored on another home
network device and show them in your device (or in a
compatible TV), do the following:
View media files
To connect a compatible PC to the home network, you
must install the related software from the DVD-ROM
supplied with your Nokia device.
1 In Gallery, select Home net.. Your device starts the
search of other compatible devices. Device names start
to appear on the display.
If Content sharing is on in your device, the other UPnP
compatible devices in the home network can view and
copy the media files you have selected to share in Share
content. If you do not want the other devices to access
your files, set Content sharing off. Even if Content
sharing is off in your device, you can still view and copy
the media files stored in another home network device if
it is allowed by the other device.
2 Select a device from the list.
3 Select the type of media you want to view from the
other device. The available file types depend on the
features of the other device.
4 Select the image, video clip, or music clip you want to
view, and select Options > Show via home net.
(images and video) or Play via home network (music).
5 Select the device in which the file is shown.
Media files stored in your device
To select images, videos, and sound clips stored in your
device and show them in another home network device,
such as a compatible TV, do the following:
To stop sharing the media file, select Options > Stop
showing.
To print images saved in Gallery through Home net. with
a UPnP compatible printer, select the print option in
Download from Www.Somanuals.com. All Manuals Search And Download.
90
Gallery. See ‘Image print’, p. 42. Content sharing does not
have to be switched on.
The synchronization application uses SyncML technology
for synchronization. For information on SyncML
compatibility, contact the supplier of the application with
which you want to synchronize your device data.
Find. To sort the found files, select Options > Sort by.
You may receive synchronization settings in a special text
message. See ‘Data and settings’, p. 49.
Copy media files
To copy or transfer media files from your device to another
compatible device, such as a UPnP compatible PC, select a
file in Gallery and Options > Organise > Copy to home
network or Move to home network. Content sharing
does not have to be switched on.
Synchronize data
In the Sync main view, you can see the different
synchronization profiles.
1 Select a synchronization profile and Options >
Synchronise. The status of the synchronization is
shown on the display.
To cancel synchronization before it finishes, select
Cancel.
2 You are notified when the synchronization is complete.
Select Yes to view the log file showing the
synchronization status and how many entries have
been added, updated, deleted, or discarded (not
synchronized) in your device or on the server.
To copy or transfer files from the other device to your
device, select a file in the other device, and Options >
Copy to phone mem. or Copy to memory card (the name
of the memory card if a compatible memory card is
available). Content sharing does not have to be switched
on.
Synchronization
Connection manager
Press
, and select Connect. > Sync. Sync enables you
to synchronize your notes, calendar, contacts, or e-mail
with various compatible calendar and address book
applications on a compatible computer or on the internet.
You can also create or edit synchronization settings.
Press
, and select Connect. > Conn. mgr.. To view the
status of data connections or end connections in GSM and
Download from Www.Somanuals.com. All Manuals Search And Download.
91
UMTS network and wireless LAN, select Act. data conn..
To search for wireless LANs available within range, select
Availab. WLAN.
Create an Internet access point
1 Press , and select Connect. > Conn. mgr. >
Availab. WLAN.
2 The device searches for wireless LANs within range.
Scroll to the network in which you want to create an
Internet access point, and select Options > Define
access point.
3 The device creates an Internet access point with default
settings. To view or change these settings, see ‘Access
points’, p. 106.
Data connections
In the active connections view, you can see the open data
connections: data calls ( ), packet data connections (
or ), and wireless LAN connections ( ).
Note: The actual time invoiced for calls by your
service provider may vary, depending on network
features, rounding off for billing, and so forth.
Device manager
To end a connection, select Options > Disconnect. To
close all open connections, select Options > Disconnect
all.
Press
, and select Connect. > Dev. mgr.. You may
receive server profiles and different configuration settings
from your service provider, or company information
management department. These configuration settings
may include access point settings for data connections and
other settings used by different applications in your device.
To view the details of a connection, select Options >
Details. The details shown depend on the connection type.
Wireless LAN
The available wireless LAN view shows a list of wireless
LANs within range, their network mode (Infrastructure or
To connect to a server and receive configuration settings
for your device, scroll to a profile, and select Options >
Start configuration.
Ad-hoc), and signal strength indicator.
is shown for
if your device has an
networks with encryption, and
To allow or deny receiving of configuration settings from
service providers, select Options > Enable config. or
Disable config..
active connection in the network.
To view the details of a network, select Options > Details.
Download from Www.Somanuals.com. All Manuals Search And Download.
92
Server profile settings
Contact your service provider for the correct settings.
Modem
Press
, and select Connect. > Modem. To connect your
device to a compatible PC through infrared, to use it as a
modem, press . For how to connect the devices, see
‘Infrared connection’, p. 87
Server name—Enter a name for the configuration server.
Server ID—Enter the unique ID to identify the
configuration server.
Server password—Enter a password to identify your device
to the server.
Session mode—Select the connection type that is used to
connect to the server: Bluetooth or Internet.
Access point—Select an access point to be used when
connecting to the server.
Host address—Enter the URL address of the server.
Port—Enter the port number of the server.
User name and Password—Enter your user name and
password.
Allow configuration—To receive configuration settings
from the server, select Yes.
Auto-accept all reqs.—If you want your device to ask for
confirmation before accepting a configuration from the
server, select No.
Network authentic.—Select if network authentication is
used.
Download from Www.Somanuals.com. All Manuals Search And Download.
93
Office
Base currency and exchange rates
Recorder
Select Type > Currency > Options > Currency rates.
Before you can make currency conversions, you must select
a base currency and add exchange rates. The rate of the
base currency is always 1.
To record voice memos, press
, and select Office >
Recorder. To record a telephone conversation, open
Recorder during a voice call. Both parties hear a tone
every 5 seconds during recording.
Note: When you change base currency, you must
enter the new rates because all previously set exchange
rates are cleared.
Converter
Calculator
To convert measures from one unit to another, press
,
and select Office > Converter.
To add, subtract, multiply, divide, and calculate square
Converter has limited accuracy, and rounding errors may
occur.
roots and percentages, press
Calculator.
, and select Office >
1 In the Type field, select the measure you want to use.
2 In first Unit field, select the unit from which you want
to convert. In the next Unit field, select the unit to
which you want to convert.
Note: This calculator has limited accuracy and is
designed for simple calculations.
3 In the first Amount field, enter the value you want to
convert. The other Amount field changes
automatically to show the converted value.
Download from Www.Somanuals.com. All Manuals Search And Download.
94
•
•
Archive password—Set, clear, or change the archive
password for protected archives.
Zip manager settings—Change the following settings:
Compession level and Include subfolders.
Notes
To write notes, press
can send notes to compatible devices, and save plain text
files (.txt format) that you receive to Notes.
, and select Office > Notes. You
You can store archive files on the device or on a
compatible memory card.
To print a note on a compatible basic print profile (BPP)
equipped printer with Bluetooth connectivity (such as HP
Deskjet 450 Mobile Printer or HP Photosmart 8150), select
Options > Print.
Quickoffice
To use the Quickoffice applications, press
, and select
Office > Quickoffice. A list of files in the .doc, .xls, .ppt,
and .txt file formats saved in your device opens.
Zip manager
To open a file in its respective application, press
sort files, select Options > Sort files.
. To
Use the Zip manager application to compress files.
Compressed files use less memory and are more convenient
to e-mail.
To open Quickword, Quicksheet, or Quickpoint, press
to reach the desired view.
To open Zip manager, press
, and select Office > Zip .
Quickword
With Quickword, you can view native Microsoft Word
documents on the display of your device. Quickword
supports colors, bold, italics, and underline.
You can perform the following tasks using Zip manager:
•
•
•
Create new archive—Create a new archive file to store
compressed ZIP formatted files
Update an archive—Add single or multiplecompressed
files or directories to an existing archive.
Delete files—Delete files or directories from an existing
archive.
Quickword supports the viewing of documents saved in
.doc format in Microsoft Word 97 or later. Not all
Download from Www.Somanuals.com. All Manuals Search And Download.
95
variations or features of the mentioned file formats are
supported.
View spreadsheets
To move around in the spreadsheet, use the scroll key.
See also ‘More information’, p. 97.
To switch between worksheets, select Options >
Worksheet.
View Word documents
To search the speadsheet for a text within a value or
formula, select Options > Find.
To move in the document, use the scroll key.
To search the document for text, select Options > Find.
You can also select Options and from the following:
To change how the spreadsheet is displayed, select
Options and from the following:
Go to—to move to the start, end, or selected position
within the document
Pan—to navigate within the current worksheet by blocks.
A block contains columns and rows displayed by a screen.
To display the columns and rows, select a block and OK.
Zoom—to zoom in or out
Start auto-scroll—to start automatic scrolling through
Zoom—to zoom in or out
the document. To stop scrolling, press
.
Freeze panes—to keep the highlighted row, column, or
both visible while you move in the spreadsheet
Quicksheet
With Quicksheet, you can read Microsoft Excel files on
the display of your device.
Resize—to adjust the size of columns or rows
Quickpoint
With Quickpoint, you can view Microsoft PowerPoint
presentations on the display of your device.
Quicksheet supports the viewing of spreadsheet files
saved in .xls format in Microsoft Excel 97 or later. Not all
variations or features of the mentioned file formats are
supported.
Quickpoint supports the viewing of presentations created
in .ppt format in Microsoft PowerPoint 97 or later. Not all
variations or features of the mentioned file formats are
supported.
See also ‘More information’, p. 97.
Download from Www.Somanuals.com. All Manuals Search And Download.
96
See also ‘More information’, p. 97.
This application has been optimized for PDF document
content on handsets and other mobile devices, and
provides only a limited set of features compared with PC
versions.
View presentations
press
To move to the next or previous slide in the presentation,
press or
or
.
To access and open documents:
•
Press
, and select Office > Adobe PDF. Select
.
Options > Browse for file to browse and open
documents stored in the device memory and on a
compatible memory card.
To view the presentation in full screen, select Options >
Full screen.
•
•
•
•
Open an e-mail attachment from received e-mail
messages (network service).
Send a document using Bluetooth connectivity to your
Inbox in Messag..
Use File mgr. to browse and open documents stored in
the device memory and on the memory card.
Browse web pages. Ensure your device is set up with an
Internet access point before browsing. For more
information on access points, see the user guide for
your device.
To expand items in the presentation outline in the outline
view, select Options > Expand.
More information
If you experience problems with Quickword, Quicksheet,
or Quickpoint, visit www.quickoffice.com for more
information. Support is also available by sending an e-mail
Adobe reader
Manage PDF files
To browse and manage PDF files, press
, and select
Office > Adobe PDF. Your recent files are listed in the file
view. To open a document, scroll to it, and press
.
With Adobe Reader you can read PDF documents on the
display of your device.
You can also select Options and from the following:
Download from Www.Somanuals.com. All Manuals Search And Download.
97
Browse for file—to browse for PDF files in the device
More information
For more information, visit www.adobe.com.
memory or on a compatible memory card.
Settings—to modify default zoom level and viewing mode
of PDF documents.
To share questions, suggestions, and information about the
application, visit the Adobe Reader for Symbian OS user
forum at http://adobe.com/support/forums/main.html.
View PDF files
When a PDF file is open, select Options and one of the
following:
Barcode reader
Use the Barcode application to decode different
types of codes (for example, barcodes and codes
in magazines). The codes may contain information such as
URL links, e-mail addresses, and phone numbers.
Zoom—to zoom in, out, or to a selected percentage. You
can also resize the document to the screen width, or fit
the whole PDF page to the screen.
Find—to search the document for a text.
To scan and decode barcodes, press
, and select
View—to view the document in full screen. You can also
rotate the PDF document by 90 degrees in either direction.
Office > Barcode.
To scan a code, select Scan code. Set the code between the
red lines on the display. The Barcode scans and decodes
the code, and the decoded information appears on the
display.
Go to—to move to a selected page, next page, previous
page, first page, or last page.
Save—to save the file to device memory or a compatible
memory card.
To save the scanned data, select Options > Save. The data
is saved in .bcr format.
Settings—to modify default zoom level and default
viewing mode.
To view saved decoded information, in the main view,
Details—to display the properties of the PDF document.
select Saved data. To open a code, press
.
When viewing the decoded information, the different links,
URL links, phone numbers, and e-mail addresses, are
Download from Www.Somanuals.com. All Manuals Search And Download.
98
indicated by icons on the top of the display in the direction
they appear in the decoded information.
Select Saved data > Options and from the following:
Scan new code—to scan a new code
Open link—to open a URL link
Add to bookmarks—to save a URL link to the bookmarks
in Web
Create message—to send a text message or an e-mail to a
phone number or an e-mail address
Add to Contacts—to add a phone number, e-mail address,
or URL address to Contacts
Call—to call a phone number.
The available options may vary depending on the
highlighted link.
The device goes into the standby mode to save battery
power if Barcode cannot be activated or if no keys are
pressed for 1 minute. To continue scanning or viewing
saved information, press
.
Download from Www.Somanuals.com. All Manuals Search And Download.
99
Personalize your device
Your service provider may have requested that certain
features be disabled or not activated in your device. If so,
they will not appear on your device menu. Your device
may also have been specially configured for your service
provider. This configuration may include changes in menu
names, menu order, and icons. Contact your service
provider for more information.
•
•
General > Welcome note / logo.
To change the main menu view, in the main menu,
select Options > Change view > Grid or List.
To rearrange the main menu, in the main menu, select
Options > Move, Move to folder, or New folder. You
can move less used applications into folders, and place
applications that you use more often into the main
menu.
•
•
•
To use the standby display for fast access to your most
frequently used applications, see ‘Active standby
mode’, p. 102.
•
To change the standby
mode background image
or what is shown in the
screen saver, see ‘Change
the look of your device’,
p. 101.
Profiles—set tones
•
•
To customize the ringing
tones, see ‘Profiles—set
tones’, p. 100 and ‘Add
ringing tones for
contacts’, p. 69.
To change the shortcuts
To set and customize the ringing tones, message alert
tones, and other tones for different events, environments,
or caller groups, press , and select Tools > Profiles.
To change the profile, press
Scroll to the profile you want to activate, and select OK.
in the standby mode.
assigned to
,
and
in the standby mode, see ‘Standby mode’, p. 104.
To modify a profile, press , and select Tools > Profiles.
Scroll to the profile, and select Options > Personalise.
Download from Www.Somanuals.com. All Manuals Search And Download.
100
Scroll to the setting you want to change, and press
open the choices. Tones stored on the memory card are
to
activate the phone function. If the device has been
locked, enter the lock code.
indicated with
and listen to each one before you make your selection. To
stop the sound, press any key.
. You can scroll through the tone list
Warning: Your device must be switched on to use
offline profile. Do not switch the device on when
wireless device use is prohibited or when it may cause
interference or danger.
When you choose a tone, Tone downloads opens a list of
bookmarks. You can select a bookmark and start a
connection to a web page to download tones.
When you have activated the offline profile, you can still
use the wireless LAN (if available), for example, to read
your e-mail or browse on the internet. Remember to
comply with any applicable safety requirements when
establishing and using a wireless LAN connection. See
‘Wireless LAN’, p. 17.
If you want the caller’s name to be said when your device
rings, select Options > Personalise > Say caller's name >
On. The caller’s name must be saved in Contacts.
To create a new profile, select Options > Create new.
To exit the offline profile, press
, and select another
profile. The device reenables wireless transmissions
(providing there is sufficient signal strength). If a
Bluetooth connection is activated before using the offline
profile, it is deactivated. A Bluetooth connection is
automatically reactivated after you exit the offline profile.
See ‘Settings’, p. 84.
Offline profile
The offline profile lets you use the device without
connecting to the wireless network. When you activate the
offline profile, the connection to the wireless network is
turned off, as indicated by
in the signal strength
indicator area. All wireless phone signals to and from the
device are prevented. If you try to send messages, they are
placed in the outbox to be sent later.
Change the look of your
device
Warning: In the offline profile you cannot make or
receive any calls, except calls to certain emergency
numbers, or use other features that require network
coverage. To make calls, you must change profiles to
To change the look of the display, such as the wallpaper
and icons, press , and select Tools > Themes. The active
theme is indicated by
. In Themes you can group
Download from Www.Somanuals.com. All Manuals Search And Download.
101
together elements from other themes or select images
from the Gallery to personalize themes further. The
themes on a compatible memory card (if inserted) are
Press , select Tools > Settings > Phone > Standby
mode > Active standby, and press
to switch the active
standby on or off.
indicated by
. The themes on the memory card are not
The active standby display is
shown with default
applications across the top of
the screen, and calendar,
to-do, and player events
listed below.
available if the memory card is not inserted in the device.
If you want to use the themes saved in the memory card
without the memory card, save the themes in the device
memory first.
To open a browser connection and download more
themes, select Theme downloads.
Scroll to an application or
To activate a theme, scroll to it, and select Options >
Apply. To preview a theme before activating it, select
Options > Preview.
event, and press
.
The standard scroll key
shortcuts available in the
standby mode cannot be used
when the active standby
mode is on.
To edit themes, scroll to a theme, and select Options >
Edit to change the settings for Wallpaper and Power
saver.
To restore the selected theme to its original settings,
select Options > Restore orig. theme when you edit a
theme.
To change the default applications shortcuts, press
,
select Tools > Settings > Phone > Standby mode >
Active standby apps., and press
.
Some shortcuts may be fixed, and you are not able to
change them.
Active standby mode
Use your standby display for fast access to your most
frequently used applications. By default, the active
standby mode is on.
Download from Www.Somanuals.com. All Manuals Search And Download.
102
Tools
Phone settings
Multimedia key
To open the shortcut assigned to the multimedia key, press
General
and hold
press
. To open a list of multimedia applications,
. To open the desired application, use the scroll
Phone language—Changing the language of the display
texts in your device also affects the format used for date
and time and the separators used, for example, in
calculations. Automaticselects the language according to
the information on your SIM card. After you change the
display text language, the device restarts.
key. To exit the list without selecting an application, press
.
To change the shortcuts, press
and
. To change the
, select
applications that are shown when you press
Top, Left, Middle, and Right and the application.
Changing the settings for Phone language or Writing
language affects every application in your device, and the
change remains effective until you change these settings
again.
Some shortcuts may be fixed, and you are not able to
change them.
Writing language—Changing the language affects the
characters and special characters available when writing
text and the predictive text dictionary used.
Settings
To change settings, press
To open a settings group, press
want to change, and press
, and select Tools > Settings.
Predictive text—Set the predictive text input On or Off
for all editors in the device. The predictive text dictionary
is not available for all languages.
. Scroll to a setting you
.
Some settings may be preset for the device by your service
provider, and you may not be able to change them.
Welcome note / logo—The welcome note or logo is
displayed briefly each time you switch on the device.
Download from Www.Somanuals.com. All Manuals Search And Download.
103
Select Default to use the default image, Text to write a
Display
Brightness—Adjust the basic brightness level of the display
to lighter or darker. However, in extreme light conditions,
the brightness of the display is automatically adjusted.
Orig. phone settings—You can reset some of the settings
to their original values. To do this, you need the lock code.
See ‘Security’, ‘Phone and SIM’, p. 110. After resetting, the
device may take a longer time to power on. Documents
and files are unaffected.
Power saver time-out—Select the time-out period after
which the screen saver is activated.
Light time-out—Select a time-out after which the
backlight of the display is switched off.
Standby mode
Active standby—Use shortcuts to applications in the
Cover display
Select Personalisation and from the following:
standby mode. See ‘Active standby mode’, p. 102.
Left selection key—Assign a shortcut to the left selection
Wallpaper—Select the background image displayed on the
cover display in the standby mode. If you select User
defined in the wallpaper settings, the cropping tool frame
is shown on top of the image you selected. The cropping
tool frame is the size of the cover display, and you can
zoom, rotate, and crop the area of the image you want to
be displayed on the cover display.
key (
) in the standby mode.
Right selection key—Assign a shortcut to the right
selection key ( ) in the standby mode.
Active standby apps.—Select the application shortcuts
you want to appear in the active standby. This setting is
only available if Active standby is on.
You can also assign keypad shortcuts for the different
presses of the centre selection key. The centre selection
key shortcuts are not available if the active standby is on.
Closing animation—Select a short animation to play when
you close the cover.
Closing tone—Select a short tune to play when you close
the cover.
Operator logo—This setting is only available if you have
received and saved an operator logo. Select Off if you do
not want the logo to be shown.
Opening tone—Select a short tune to play when you open
the cover and the device is in the standby mode.
Select Calls and from the following:
Download from Www.Somanuals.com. All Manuals Search And Download.
104
Answer if fold opened—Select No or Yes.
Automatic redial—Select On, and your device makes a
maximum of 10 attempts to connect the call after an
unsuccessful call attempt. To stop automatic redialing,
If fold closed—Select End call or Activate loudspeaker.
press
.
Call settings
Summary after call—Activate this setting if you want the
device to briefly display the approximate duration of the
last call.
Send my caller ID—Select Yes or No to set your phone to
be seen or hidden from the person you are calling.
Otherwise, the value may be set by your service provider
when you subscribe to the network service. Set by
network is displayed.
Speed dialling—Select On, and the numbers assigned to
the speed dialing keys (
–
) can be dialed by
pressing and holding the key. See also ‘Speed dial a phone
number’, p. 58.
Call waiting—If you have activated call waiting (network
service), the network notifies you of a new incoming call
while you have a call in progress. To check whether the
function is active, select Check status. To set the function
on or off, select Activate or Cancel.
Anykey answer—Select On. To answer an incoming call
briefly press any keypad key, except
.
,
,
, and
Line in use—This setting (network service) is shown only
if the SIM card supports two subscriber numbers, that is,
two phone lines. Select which phone line you want to use
for making calls and sending text messages. Calls on both
lines can be answered irrespective of the selected line. If
you select Line 2 and have not subscribed to this network
service, you will not be able to make calls. When line 2 is
Reject call with SMS—Select Yes to send a text message
to a caller informing why you could not answer the call.
See ‘Answer or reject a call’, p. 63.
Message text—Write text to be sent in a text message
when you reject a call.
selected,
Tip! To switch between the phone lines, press and
hold in the standby mode.
is shown in the standby mode.
Image in video call—You can deny video sending when
you receive a video call. Select a still image to be displayed
instead of video.
Download from Www.Somanuals.com. All Manuals Search And Download.
105
Line change—To prevent line selection (network service),
select Disable if supported by your SIM card. To change
this setting, you need the PIN2 code.
and subscription to packet data connection services,
contact your service provider.
Access points
You may receive access point settings in a message from a
service provider. See ‘Data and settings’, p. 49. Some or all
provider, and you may not be able to change, create, edit,
Connection
Data connections and access points
or remove them.
indicates a protected access point.
Your device supports packet data connections, such as
GPRS in the GSM network. When you use your device in
GSM and UMTS networks, multiple data connections can
be active at the same time, and access points can share a
data connection.
indicates a packet data access point, and
a
wireless LAN access point.
Tip! To create an IAP in a wireless LAN, press
, and
select Connect. > Conn. mgr. > Availab. WLAN >
Options > Define access point.
You can also use a wireless LAN data connection. See
‘Wireless LAN’, p. 17. Only one connection in one wireless
LAN can be active at a time.
To create a new access point, select Options > New access
point. To edit the settings of an access point, select
Options > Edit. Follow the instructions from your service
provider.
To establish a data connection, an access point is required.
You can define different kinds of access points as follows:
Connection name—Enter a descriptive name for the
•
•
•
MMS access point to send and receive multimedia
messages
Access point for the web application to view WML or
XHTML pages
IAP to send and receive e-mail and connect to the
internet
connection.
Data bearer—Select the data connection type.
Depending on the data connection you select, only certain
setting fields are available. Fill in all fields marked with
Must be defined or with a red asterisk. Other fields can be
left empty, unless you have been instructed otherwise by
your service provider.
Check the type of access point you need with your service
provider for the service you want to access. For availability
Download from Www.Somanuals.com. All Manuals Search And Download.
106
To be able to use a data connection, the network service
provider must support this feature, and if necessary,
activate it for your SIM card.
DNS address—In Primary name serv.:, enter the IP
address of the primary DNS server. In Second. name
server:, enter the IP address of the secondary DNS server.
Contact your internet service provider to obtain these
addresses.
Packet data
Follow the instructions from your service provider.
Proxy serv. address—Define the address for the proxy
server.
Access point name—You obtain the access point name
from your service provider.
Proxy port number—Enter the proxy port number.
Wireless LAN
User name—The user name may be needed to make a data
connection, and is usually provided by the service provider.
Follow the instructions from your service provider.
Prompt password—If you must enter the password every
time you log in to a server, or if you do not want to save
your password in the device, select Yes.
WLAN netw. name—Select Enter manuallyor Search for
netw.. If you select an existing network, WLAN netw.
mode and WLAN security mode are determined by the
settings of its access point device.
Password—A password may be needed to make a data
connection, and is usually provided by the service provider.
WLAN netw. mode—Select Ad-hoc to create an ad hoc
network and to allow devices to send and receive data
directly; a wireless LAN access point device is not needed.
Authentication—Select Normal or Secure.
Homepage—Depending on the access point you are setting
up, enter the web address or the address of the multimedia
messaging center.
WLAN security mode—Select the encryption used: WEP,
802.1x (not for ad hoc networks), or WPA/WPA2. If you
select Open network, no encryption is used. The WEP,
802.1x, and WPA functions can be used only if the
network supports them.
Select Options > Advanced settings to change the
following settings:
Network type—Select IPv4 settings or IPv6 settings. The
other settings depend on the selected network type.
WLAN security sett.—Enter the settings for the selected
security mode:
Phone IP address (for IPv4 only)—Enter the IP address of
your device.
Download from Www.Somanuals.com. All Manuals Search And Download.
107
Security settings for WEP are as follows:
Select Options > Advanced settings and from the
following:
Wep key in use—Select the WEP key number. You can
create up to four WEP keys. The same settings must be
entered on the wireless LAN access point device.
IPv4 settings: Phone IP address (the IP address of your
device), Subnet mask (the subnet IP address), Default
gateway (the gateway), and DNS address—Enter the IP
addresses of the primary and secondary DNS server.
Contact your internet service provider for these addresses.
Authentication type—Select Open or Shared for the
authentication type between your device and the wireless
LAN access point device.
IPv6 settings > DNS address—Select Automatic,
WEP key settings—Enter WEP encryption (length of the
key), WEP key format (ASCII or Hexadecimal), and WEP
key (the WEP key data in the selected format).
Well-known, or User defined.
Ad-hoc channel (only for Ad-hoc)—To enter a channel
number (1-11) manually, select User defined.
Security settings for 802.1x and WPA/WPA2 are as
follows:
Proxy serv. address—Enter the address for the proxy
server.
WPA mode—Select the means of authentication: EAP to
use an extensible authentication protocol (EAP) plug-in or
Pre-shared key to use a password. Complete the
appropriate settings:
Proxy port number—Enter the proxy port number.
Packet data
The packet data settings affect all access points using a
packet data connection.
EAP plug-in settings (only for EAP)—Enter the settings as
your service provider instructs.
Packet data conn.—If you select When available and you
are in a network that supports packet data, the device
registers to the packet data network. Starting an active
packet data connection (for example, to send and receive
e-mail) is quicker. If there is no packet data coverage, the
device periodically tries to establish a packet data
Pre-shared key (only for Pre-shared key)—Enter a
password. The same password must be entered on the
wireless LAN access point device.
TKIP encryption—Select whether Temporal Key Integrity
Protocol (TKIP) is used.
connection. If you select When needed, the device uses a
Homepage—Define a home page.
Download from Www.Somanuals.com. All Manuals Search And Download.
108
packet data connection only if you start an application or
action that needs it.
Security
Access point—The access point name is needed to use your
device as a packet data modem to your computer.
Phone and SIM
each time the device is switched on. Deactivating the PIN
code request may not be allowed by some SIM cards. See
‘Glossary of PIN and lock codes’, p. 110.
Wireless LAN
Show availability—Select whether
a wireless LAN is available.
is displayed when
Scan for networks—If you set Show availability to Yes,
select how often the device searches for available wireless
LANs and updates the indicator.
PIN code, PIN2 code, and Lock code—You can change the
lock, PIN, and PIN2 codes. These codes can only include
the numbers from 0 to 9. If you forget any of these codes,
contact your service provider. See ‘Glossary of PIN and
lock codes’, p. 110.
To view advanced settings, select Options > Advanced
settings. Changing wireless LAN advanced settings is not
recommended.
Avoid using access codes similar to the emergency
numbers to prevent accidental dialing of the emergency
number.
Configurations
You may receive trusted server settings from your service
provider in a configuration message, or the settings may be
stored on your USIM card. You can save these settings to
your device, view, or delete them in Configs..
Autolock period—You can set an autolock period, a
time-out after which the device automatically locks. To
turn off the autolock period, select None.
To unlock the device, enter the lock code.
Date and time
When the device is locked, calls may be possible to the
official emergency number programmed into your device.
See ‘Clock settings’, p. 17 and language settings in
‘General’, p. 103.
Tip! To lock the device manually, press
commands opens. Select Lock phone.
. A list of
Download from Www.Somanuals.com. All Manuals Search And Download.
109
Lock if SIM changed—You can set the device to ask for
the lock code when an unknown SIM card is inserted into
your device. The device maintains a list of SIM cards that
are recognized as the owner’s cards.
PIN2 code—This code (4 to 8 digits) is supplied with some
SIM cards, and is required to access some functions in your
device.
Lock code (security code)—This code (5 digits) can be used
to lock the device to avoid unauthorized use. The factory
setting for the lock code is 12345. To avoid unauthorized
use of your device, change the lock code. Keep the new
code secret and in a safe place separate from your device.
If you forget the code, contact your service provider.
Closed user group—You can specify a group of people to
whom you can call and who can call you (network
service).
When calls are limited to closed user groups, calls may be
possible to the official emergency number programmed
into your device.
PUK and PUK2 codes—These codes (8 digits) are required to
change a blocked PIN code or PIN2 code, respectively. If
the codes are not supplied with the SIM card, contact the
operator whose SIM card is in your device.
Confirm SIM services—You can set the device to display
confirmation messages when you are using a SIM card
service (network service).
UPUK code—This code (8 digits) is required to change a
blocked UPIN code. If the code is not supplied with the
USIM card, contact the service provider whose USIM card
is in your device.
Glossary of PIN and lock codes
If you forget any of these codes, contact your service
provider.
PIN code—This code protects your SIM card against
unauthorized use. The PIN code (4 to 8 digits) is usually
supplied with the SIM card. After three consecutive
incorrect PIN code entries, the code is blocked, and you
need the PUK code to unblock it.
Certificate management
Digital certificates do not guarantee safety; they are used
to verify the origin of software.
In the certificate management main view, you can see a
list of authority certificates that are stored in your device.
UPIN code—This code may be supplied with the USIM
card. The USIM card is an enhanced version of the SIM
card and is supported by UMTS mobile phones.
Press
to see a list of personal certificates, if available.
Digital certificates should be used if you want to connect
to an online bank or another site or remote server for
Download from Www.Somanuals.com. All Manuals Search And Download.
110
actions that involve transferring confidential information.
They should also be used if you want to reduce the risk of
viruses or other malicious software and be sure of the
authenticity of software when downloading and installing
software.
certificate details, the validity of the certificate is checked,
and one of the following notes may be displayed:
Certificate not trusted—You have not set any application
to use the certificate. See ‘Change the trust settings’, p.
111.
Important: Even if the use of certificates makes the
risks involved in remote connections and software
installation considerably smaller, they must be used
correctly in order to benefit from increased security. The
existence of a certificate does not offer any protection by
itself; the certificate manager must contain correct,
authentic, or trusted certificates for increased security to
be available. Certificates have a restricted lifetime. If
Expired certificate or Certificate not valid yet is shown
even if the certificate should be valid, check that the
current date and time in your device are correct.
Expired certificate—The period of validity has ended for
the selected certificate.
Certificate not valid yet—The period of validity has not
yet begun for the selected certificate.
Certificate corrupted—The certificate cannot be used.
Contact the certificate issuer.
Change the trust settings
Before changing any certificate settings, you must make
sure that you really trust the owner of the certificate and
that the certificate really belongs to the listed owner.
View certificate details—check authenticity
Scroll to an authority certificate, and select Options >
Trust settings. Depending on the certificate, a list of the
applications that can use the selected certificate is shown.
For example:
You can only be sure of the correct identity of a server
when the signature and the period of validity of a server
certificate have been checked.
You are notified if the identity of the server is not
authentic or if you do not have the correct security
certificate in your device.
Symbian installation >Yes—The certificate is able to
certify the origin of a new Symbian operating system
application.
To check certificate details, scroll to a certificate, and
select Options > Certificate details. When you open
Internet > Yes—The certificate is able to certify servers.
Download from Www.Somanuals.com. All Manuals Search And Download.
111
App. installation > Yes—The certificate is able to certify
the origin of a new Java application.
To check whether option is active, select Check status. To
set the option on or off, select Activate or Cancel.
Select Options > Edit trust setting to change the value.
Several diverting options can be active at the same time.
When all calls are diverted,
standby mode.
is shown in the
Track protection object
Some copyright-protected music files may include a
transaction identifier. Select whether you allow the
identifier to be sent with the music file if you send or
forward the file. The provider of the music file can use the
identifier to track the distribution of the files.
Call barring and call diverting cannot be active at the same
time.
Call barring
EAP plug-ins
You can view the EAP plug-ins currently installed in your
device (network service). Some Internet access points that
use wireless LAN as a data bearer and WPA security mode
use the plug-ins for authentication.
Call barring (network service) allows you to restrict the
calls that you make or receive with the device. To change
the settings, you need the restriction password from your
service provider.
Select the desired barring option. To check whether option
is active, select Check status. To set it on or off, select
Activate or Cancel. Call barring affects all calls, including
data calls.
Call divert
Call divert allows you to divert your incoming calls to
your voice mailbox or another phone number. For details,
contact your service provider.
Call barring and call diverting cannot be active at the same
time.
When calls are barred, calls may be possible to certain
official emergency numbers.
Select which calls you want to divert and the desired
diverting option. To divert voice calls when your number
is busy or when you reject incoming calls, select If busy.
Download from Www.Somanuals.com. All Manuals Search And Download.
112
Cell info display—Select On to set the device to indicate
when it is used in a cellular network based on
microcellular network (MCN) technology and to activate
cell info reception.
Network
Your device can automatically switch between the GSM
and UMTS networks. The GSM network is indicated with
in the standby mode. The UMTS network is indicated
Enhancement settings
with
.
Network mode (shown only if supported by the wireless
service provider)—Select which network to use. If you
select Dual mode, the device uses the GSM or UMTS
network automatically, according to the network
parameters and the roaming agreements between the
wireless service providers. Contact your service provider for
more details.
In the standby mode,
is connected, and
a Bluetooth connection to a headset is lost.
a compatible loopset is connected and
phone is connected.
indicates a compatible headset
that the headset is unavailable, or
indicates
that a Text
Select Headset, Loopset, Text phone, Bluetooth
handsfree, or Car kit and from the following:
Operator selection—Select Automatic to set the device to
search for and select one of the available networks, or
Manual to manually select the network from a list of
networks. If the connection to the manually selected
network is lost, the device sounds an error tone and asks
you to reselect a network. The selected network must have
a roaming agreement with your home cellular network.
Default profile—Set the profile that you want activated
each time you connect a certain enhancement to your
device. See ‘Profiles—set tones’, p. 100.
Automatic answer—Set if you want the device to answer
an incoming call automatically after 5 seconds. If the
ringing type is set to Beep once or Silent, automatic
answer is disabled. Automatic answer is not available for
Text phone.
Glossary: A roaming agreement is an agreement
between two or more network service providers to
enable the users of one service provider to use the
services of other service providers.
Lights (for car kit)—Set whether lights remain on or are
switched off after the time-out.
Download from Www.Somanuals.com. All Manuals Search And Download.
113
If you are using a Text phone, you must activate it on your
device. Press
Enhancement > Text phone > Use Text phone > Yes.
To add more applications to the list, select Options > New
application. To add a second voice command that can be
used to start the application, select Options > Change
command, and enter the new voice command as text.
Avoid very short names, abbreviations, and acronyms.
, and select Tools > Settings >
TV configuration
To listen to the synthesized voice tag, select Options >
Playback.
Press
following:
, and select Tools > TV out. Select from the
To change voice command settings, select Options >
Settings. To switch off the synthesizer that plays
recognized voice tags and commands in the selected
device language, select Synthesiser > Off. To reset voice
recognition learning, select Reset voice adapts..
TV system—Select PAL for PAL and SECAM TV system
format or NTSC for NTSC TV system format.
Ratio—Select 4:3 or 16:9.
Voice commands
Application manager
You can use voice commands to control your device. For
more information about the enhanced voice commands
supported by your device, see ‘Voice dialing’, p. 58.
Press
, and select Tools > App. mgr.. You can install
two types of applications and software to your device:
•
•
J2ME™ applications based on Java technology with the
extension .jad or .jar ( ).
To activate enhanced voice commands for starting
applications and profiles, press
Voice cm. > Profiles. The device creates voice tags for the
applications and profiles. To use enhanced voice
and select Tools >
Other applications and software suitable for the
Symbian operating system ( ). The installation files
have the .sis extension. Only install software
specifically designed for your Nokia device. Software
providers will often refer to the official model number
of this product.
commands, press and hold
in the standby mode, and
say a voice command. The voice command is the name of
the application or profile displayed in the list.
Download from Www.Somanuals.com. All Manuals Search And Download.
114
Installation files may be transferred to your device from a
compatible computer, downloaded during browsing, or
sent to you in a multimedia message, as an e-mail
attachment, or using Bluetooth connectivity or infrared.
You can use Nokia Application Installer in Nokia PC Suite
to install an application to your device. If you use
Microsoft Windows Explorer to transfer a file, save the file
to a memory card (local disk).
Before installation, note the following:
•
•
•
To view the application type, version number, and the
supplier or manufacturer of the application, select
Options > View details.
To display the security certificate details of the
application, select Options > View certificate. See
‘Certificate management’, p. 110.
If you install a file that contains an update or repair to
an existing application, you can only restore the
original application if you have the original installation
file or a full back-up copy of the removed software
package. To restore the original application, remove
the application, and install the application again from
the original installation file or the back-up copy.
The .jar file is required for installing Java applications.
If it is missing, the device may ask you to download it.
If there is no access point defined for the application,
you are asked to select one. When you are
After you install applications to a compatible memory
card, installation files (.sis) remain in the device memory.
The files may use large amounts of memory and prevent
you from storing other files. To maintain sufficient
memory, use Nokia PC Suite to back up installation files to
a compatible PC, then use the file manager to remove the
installation files from the device memory. If the .sis file is
a message attachment, delete the message from the
Messaging inbox.
•
downloading the .jar file, you may need to enter a user
name and password to access the server. You obtain
these from the supplier or manufacturer of the
application.
Install applications and software
indicates a .sis application,
that the application is not fully installed, and
a Java application,
that the
application is installed on a compatible memory card.
1 To locate an installation file, press
, and select
Tools > App. mgr.. Alternatively, search the device
memory or a memory card (if inserted) in File mgr., or
open a message in Messag. > Inbox that contains an
installation file.
Important: Only install and use applications and
other software from trusted sources, such as applications
that are Symbian Signed or have passed the Java
VerifiedTM testing.
Download from Www.Somanuals.com. All Manuals Search And Download.
115
2 In App. mgr., select Options > Install. In other
applications, scroll to the installation file, and press
to start the installation.
Remove applications and software
Scroll to a software package, and select Options >
Remove. Select Yes to confirm.
During installation, the device shows information
about the progress of the installation. If you are
installing an application without a digital signature or
certification, the device displays a warning. Continue
installation only if you are sure of the origin and
contents of the application.
If you remove software, you can only reinstall it if you have
the original software package or a full backup of the
removed software package. If you remove a software
package, you may no longer be able to open documents
created with that software.
To start an installed application, locate it in the menu, and
If another software package depends on the software
package that you removed, the other software package
may stop working. Refer to the documentation of the
installed software package for details.
press
.
To start a network connection and to view extra
information about the application, select Options > Go to
web address, if available.
Settings
To see what software packages are installed or removed
and when, select Options > View log.
Select Options > Settings and from the following:
To send your installation log to a help desk so that they
can see what is installed or removed, select Options >
Send log > Via text message or Via e-mail (available
only if the correct e-mail settings are in place).
Online certif. check—Select to check the online
certificates before installing an application.
Default web address—Set the default address used when
checking online certificates.
Important: Your device can only support one
antivirus application. Having more than one application
with antivirus functionality could affect performance and
operation or cause the device to stop functioning.
Some Java applications may require a phone call, a
message to be sent, or a network connection to a specific
access point for downloading extra data or components. In
the App. mgr. main view, scroll to an application, and
Download from Www.Somanuals.com. All Manuals Search And Download.
116
select Options > Suite settings to change settings related
to that specific application.
To view detailed information, such as the validity status
and ability to send the file, scroll to an activation key, and
press
.
Activation keys for
copyright-protected files
Copyright protections may prevent some images, music
(including ringing tones), and other content from being
copied, modified, transferred or forwarded.
To view the digital rights activation keys stored in your
device, press
the following:
, and select Tools > Actv. keys and from
Valid keys—View keys that are connected to one or more
media files and keys whose validity period has not started
yet.
Invalid keys—View keys that are not valid; the time period
for using the media file is exceeded or there is a protected
media file in the device but no connected activation key.
Not in use—View keys that have no media files connected
to them in the device.
To buy more usage time or extend the usage period for a
media file, select an invalid activation key and Options >
Get activation key. Activation keys cannot be updated if
web service message reception is disabled. See ‘Web
service messages’, p. 50.
Download from Www.Somanuals.com. All Manuals Search And Download.
117
Troubleshooting
Check that the other device is not in the hidden mode.
Check that both devices are compatible.
Q&A
Access codes
Q: Why can’t I end a Bluetooth connection?
Q: What is my password for the lock, PIN, or PUK codes?
A: If another device is connected to your device, you can either
end the connection using the other device or by
deactivating Bluetooth connectivity. Select Connect. >
Bluetooth > Off.
A: The default lock code is 12345. If you forget or lose the
lock code, contact your device dealer.
If you forget or lose a PIN or PUK code, or if you have not
received such a code, contact your network service
provider.
For information about passwords, contact your access
point provider, for example, a commercial internet service
provider (ISP) or wireless service provider.
Browser services
Q: What do I do if the following message is displayed: No valid
access point defined. Define one in Services settings.?
A: Insert the correct browser settings. Contact your service
provider for instructions.
Application not responding
Camera
Q: How do I close an application that is not responding?
A: To open the application switching window, press and hold
Q: Why do images look smudgy?
. Scroll to the application, and press
application.
to close the
A: Remove the protective plastic film covering the display and
camera. Ensure that the camera lens protection window is
clean.
Bluetooth connectivity
Q: Why is there audible noise from the camera when
Q: Why can’t I find my friend’s device?
autofocus or optical zoom is used?
A: Check that both devices have activated Bluetooth
connectivity.
A: Zoom and AF lens movement causes mechanical noise.
Select Options > Settings > Optical zoom during
recording > Off to eliminate mechanical noise caused
by lens movement when recording.
Check that the distance between the two devices is not
over 10 meters (33 feet) and that there are no walls or
other obstructions between the devices.
Download from Www.Somanuals.com. All Manuals Search And Download.
118
Q: Why do images or videos captured using night mode tend
to be noisier under dark lighting conditions compared to
normal mode?
A: You may have activated a filter, and no communication
events fitting that filter have been logged. To see all
events, select My own > Log > Options > Filter > All
communication.
A: The output of the image sensor under the dark lighting
conditions is more amplified with night mode than with
normal mode to provide better brightness. In return, the
noise level on the image or video increases.
Memory low
Q: What can I do if my device memory is low?
A: You can delete the following items regularly to avoid
Q: Why do VGA video frames appear jagged when video
memory getting low:
stabilization is activated?
•
•
•
•
Messages from Inbox, Drafts, and Sent folders in Messag.
Retrieved e-mail messages from the device memory
Saved browser pages
A: Each video frame is enlarged from a smaller size within VGA
to the VGA size when video stabilization is activated. Due
to this, the quality within each frame is degraded
compared to video without stabilization mode.
Images and photos in Gallery
Display
To delete contact information, calendar notes, call timers, call
cost timers, game scores, or any other data, go to the
respective application to remove the data. If you are deleting
multiple items and one of the following notes are shown: Not
enough memory to perform operation. Delete some data
first. or Memory low. Delete some data., try deleting items
one by one (starting from the smallest item).
Q: Why do missing, discolored, or bright dots appear on the
screen every time I turn on my device?
A: This is a characteristic of this type of display. Some displays
may contain pixels or dots that remain on or off. This is
normal, not a fault.
Home network (UPnP)
Q: How can I save my data before deleting it?
Q: Why can’t I share files with other devices?
A: Save your data using one of the following methods:
A: Ensure that you have configured the home network
settings. Select Connect. > Home net. > Share content >
Content sharing, and the other device is UPnP compatible.
•
Use Nokia PC Suite to make a back-up copy of all data to
a compatible computer.
Send images to your e-mail address, then save the images
to your computer.
•
Log
Q: Why does the log appear empty?
Download from Www.Somanuals.com. All Manuals Search And Download.
119
•
•
Send data using Bluetooth connectivity to a compatible
device.
Store data on a compatible memory card.
A: To stop the device from making a data connection, select
Messaging and one of the following:
On receiving msg. > Defer retrieval—to have the
multimedia messaging center save the message to be
retrieved later, for example, after you have checked the
settings. After this change, the device still needs to send
information notes to the network. To retrieve the message
now, select Retr. immediately.
On receiving msg. > Reject message—to reject all
incoming multimedia messages. After this change, the
device needs to send information notes to the network, and
the multimedia messaging center deletes multimedia
messages that are waiting to be sent to you.
Messaging
Q: Why can’t I select a contact?
A: The contact card does not have a phone number or an
e-mail address. Add the missing information to the
contact card in Contacts.
Multimedia messaging
Q: What should I do when the device cannot receive a
multimedia message because memory is full?
Multimedia recept. > Off—to ignore all incoming
multimedia messages. After this change, the device does
not make any network connections related to multimedia
messaging.
A: The amount of memory needed is indicated in the error
message: Not enough memory to retrieve message.
Delete some data first. To view what kind of data you
have and how much memory the different data groups
consume, select File manager > Options > Memory
details.
PC connectivity
Q: Why do I have problems connecting the device to my PC?
A: Ensure that Nokia PC Suite is installed and running on your
PC. See the user guide for Nokia PC Suite on the DVD-ROM.
For further information on how to use Nokia PC Suite, see
the help function on Nokia PC Suite or visit the support
pages at www.nokia.com.
Q: The note Retrieving message is shown briefly. What is
happening?
A: The device is trying to retrieve a multimedia message from
the multimedia messaging center.
Check that the settings for multimedia messaging are
defined correctly and that there are no mistakes in phone
numbers or addresses. Select Messaging > Options >
Settings > Multim. msg..
Q: How can I end the data connection when the device starts
a data connection again and again?
Download from Www.Somanuals.com. All Manuals Search And Download.
120
Wireless LAN
Q: Why can't I see a wireless LAN (WLAN) access point even
though I know I'm within its range?
A: The WLAN access point may use a hidden service set
identifier (SSID). You can only access networks that use a
hidden SSID if you know the correct SSID and have created
a WLAN internet access point for the network on your
Nokia device.
Q: How do I switch wireless LAN (WLAN) off on my Nokia
device?
A: You cannot switch off WLAN on your Nokia device. To
reduce battery consumption, you can specify that your
Nokia device does not scan for available networks.
To turn off the background scan:
1
Press
Wireless LAN.
, and select Tools > Settings > Connection >
2
3
Select Scan for networks > Never.
To save your changes, select Done.
When Scan for networks is set to Never, your Nokia device
still listens to available networks, and you can use available
WLAN networks as usual.
Download from Www.Somanuals.com. All Manuals Search And Download.
121
Battery information
Do not short-circuit the battery. Accidental short-circuiting
can occur when a metallic object such as a coin, clip, or pen
causes direct connection of the positive (+) and negative (-)
terminals of the battery. (These look like metal strips on the
battery.) This might happen, for example, when you carry a
spare battery in your pocket or purse. Short-circuiting the
terminals may damage the battery or the connecting object.
Charging and discharging
Your device is powered by a rechargeable battery. The full
performance of a new battery is achieved only after two or
three complete charge and discharge cycles. The battery can
be charged and discharged hundreds of times but it will
eventually wear out. When the talk and standby times are
noticeably shorter than normal, replace the battery. Use only
Nokia approved batteries, and recharge your battery only with
Nokia approved chargers designated for this device.
Leaving the battery in hot or cold places, such as in a closed
car in summer or winter conditions, will reduce the capacity
and lifetime of the battery. Always try to keep the battery
between 15°C and 25°C (59°F and 77°F). A device with a hot
or cold battery may not work temporarily, even when the
battery is fully charged. Battery performance is particularly
limited in temperatures well below freezing.
If a replacement battery is being used for the first time or if
the battery has not been used for a prolonged period, it may
be necessary to connect the charger then disconnect and
reconnect it to begin charging the battery.
Do not dispose of batteries in a fire as they may explode.
Batteries may also explode if damaged. Dispose of batteries
according to local regulations. Please recycle when possible.
Do not dispose as household waste.
Unplug the charger from the electrical plug and the device
when not in use. Do not leave a fully charged battery
connected to a charger, since overcharging may shorten its
lifetime. If left unused, a fully charged battery will lose its
charge over time.
If the battery is completely discharged, it may take a few
minutes before the charging indicator appears on the display
or before any calls can be made.
Nokia battery authentication
guidelines
Always use original Nokia batteries for your safety. To check
that you are getting an original Nokia battery, purchase it from
an authorized Nokia dealer, look for the Nokia Original
Use the battery only for its intended purpose. Never use any
charger or battery that is damaged.
Download from Www.Somanuals.com. All Manuals Search And Download.
122
Enhancements logo on the packaging, and inspect the
hologram label using the following steps:
3
4
Scratch the side of the label to
reveal a 20-digit code, for
example,
12345678919876543210. Turn
the battery so that the numbers
are facing upwards. The 20-digit
code reads starting from the
number at the top row followed
by the bottom row.
Successful completion of the four steps is not a total
assurance of the authenticity of the battery. If you have any
reason to believe that your battery is not an authentic original
Nokia battery, you should refrain from using it and take it to
the nearest authorized Nokia service point or dealer for
assistance. Your authorized Nokia service point or dealer will
inspect the battery for authenticity. If authenticity cannot be
verified, return the battery to the place of purchase.
Authenticate hologram
Confirm that the 20-digit code is
valid by following the instructions
at www.nokia.com/batterycheck.
1
When looking at the hologram on
the label, you should see the Nokia
connecting hands symbol from
one angle and the Nokia Original
Enhancements logo when looking
from another angle.
To create a text message, enter the
20-digit code, for example,
12345678919876543210, and send
to +44 7786 200276.
National and international operator charges will apply.
2
When you angle the hologram
left, right, down, and up, you
should see 1, 2, 3, and 4 dots on
each side respectively.
You should receive a message indicating whether the code
can be authenticated.
What if your battery is not authentic?
If you cannot confirm that your Nokia battery with the
hologram on the label is an authentic Nokia battery, please do
not use the battery. Take it to the nearest authorized Nokia
service point or dealer for assistance. The use of a battery that
is not approved by the manufacturer may be dangerous and
may result in poor performance and damage to your device
Download from Www.Somanuals.com. All Manuals Search And Download.
123
and its enhancements. It may also invalidate any approval or
warranty applying to the device.
To find out more about original Nokia batteries, visit
www.nokia.com/battery.
Download from Www.Somanuals.com. All Manuals Search And Download.
124
Care and maintenance
Your device is a product of superior design and craftsmanship
and should be treated with care. The suggestions below will
help you protect your warranty coverage.
attachments could damage the device and may violate
regulations governing radio devices.
Use chargers indoors.
Always create a backup of data you want to keep (such as
contacts and calendar notes) before sending your device
to a service facility.
To allow the device to reset, power the device off, and
remove the battery from time to time for optimum
performance. Make back-up copies of all important data.
•
•
•
Keep the device dry. Precipitation, humidity, and all types
of liquids or moisture can contain minerals that will
corrode electronic circuits. If your device does get wet,
remove the battery, and allow the device to dry completely
before replacing it.
•
•
•
Do not use or store the device in dusty, dirty areas. Its
moving parts and electronic components can be damaged.
Do not store the device in hot areas. High temperatures
can shorten the life of electronic devices, damage
batteries, and warp or melt certain plastics.
All of the above suggestions apply equally to your device,
battery, charger, or any enhancement. If any device is not
working properly, take it to the nearest authorized service
facility for service.
•
Do not store the device in cold areas. When the device
returns to its normal temperature, moisture can form
inside the device and damage electronic circuit boards.
Do not attempt to open the device other than as instructed
in this guide.
Do not drop, knock, or shake the device. Rough handling
can break internal circuit boards and fine mechanics.
Do not use harsh chemicals, cleaning solvents, or strong
detergents to clean the device.
Do not paint the device. Paint can clog the moving parts
and prevent proper operation.
Use a soft, clean, dry cloth to clean any lenses (such as
camera, proximity sensor, and light sensor lenses).
Use only the supplied or an approved replacement
antenna. Unauthorized antennas, modifications, or
•
•
•
•
•
•
Download from Www.Somanuals.com. All Manuals Search And Download.
125
Additional safety information
Your device and its enhancements may contain small parts.
Keep them out of the reach of small children.
Medical devices
Operation of any radio transmitting equipment, including
wireless phones, may interfere with the functionality of
inadequately protected medical devices. Consult a physician or
the manufacturer of the medical device to determine if they
are adequately shielded from external RF energy or if you have
any questions. Switch off your device in health care facilities
when any regulations posted in these areas instruct you to do
so. Hospitals or health care facilities may be using equipment
that could be sensitive to external RF energy.
Operating environment
Remember to follow any special regulations in force in any
area, and always switch off your device when its use is
prohibited or when it may cause interference or danger. Use
the device only in its normal operating positions. This device
meets RF exposure guidelines when used either in the normal
use position against the ear or when positioned at least
2.2 centimeters (7/8 inch) away from the body. When a carry
case, belt clip, or holder is used for body-worn operation, it
should not contain metal and should position the device the
above-stated distance from your body.
Pacemakers
Pacemaker manufacturers recommend that a minimum
separation of 15.3 centimeters (6 inches) be maintained
between a wireless phone and a pacemaker to avoid potential
interference with the pacemaker. These recommendations are
consistent with the independent research by and
recommendations of Wireless Technology Research. Persons
with pacemakers should:
In order to transmit data files or messages, this device
requires a good quality connection to the network. In some
cases, transmission of data files or messages may be delayed
until such a connection is available. Ensure the above
separation distance instructions are followed until the
transmission is completed.
•
Always keep the device more than 15.3 centimeters
(6 inches) from their pacemaker
Parts of the device are magnetic. Metallic materials may be
attracted to the device. Do not place credit cards or other
magnetic storage media near the device, because information
stored on them may be erased.
•
•
Not carry the device in a breast pocket
Hold the device to the ear opposite the pacemaker to
minimise the potential for interference.
If you suspect interference, switch off your device, and move
the device away.
Download from Www.Somanuals.com. All Manuals Search And Download.
126
of the aircraft, disrupt the wireless telephone network, and
may be illegal.
Hearing aids
Some digital wireless devices may interfere with some hearing
aids. If interference occurs, consult your service provider.
Potentially explosive environments
Vehicles
Switch off your device when in any area with a potentially
explosive atmosphere, and obey all signs and instructions.
Potentially explosive atmospheres include areas where you
would normally be advised to turn off your vehicle engine.
Sparks in such areas could cause an explosion or fire resulting
in bodily injury or even death. Switch off the device at
refueling points such as near gas pumps at service stations.
Observe restrictions on the use of radio equipment in fuel
depots, storage, and distribution areas, chemical plants or
where blasting operations are in progress. Areas with a
potentially explosive atmosphere are often but not always
clearly marked. They include below deck on boats, chemical
transfer or storage facilities, vehicles using liquefied
petroleum gas (such as propane or butane), and areas where
the air contains chemicals or particles such as grain, dust, or
metal powders.
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles such as
electronic fuel injection systems, electronic antiskid (antilock)
braking systems, electronic speed control systems, and air bag
systems. For more information, check with the manufacturer
or its representative of your vehicle or any equipment that has
been added.
Only qualified personnel should service the device, or install
the device in a vehicle. Faulty installation or service may be
dangerous and may invalidate any warranty that may apply to
the device. Check regularly that all wireless device equipment
in your vehicle is mounted and operating properly. Do not store
or carry flammable liquids, gases, or explosive materials in the
same compartment as the device, its parts, or enhancements.
For vehicles equipped with an air bag, remember that air bags
inflate with great force. Do not place objects, including
installed or portable wireless equipment in the area over the
air bag or in the air bag deployment area. If in-vehicle wireless
equipment is improperly installed and the air bag inflates,
serious injury could result.
Emergency calls
Important: Wireless phones, including this device,
operate using radio signals, wireless networks, landline
networks, and user-programmed functions. Because of this,
connections in all conditions cannot be guaranteed. You
should never rely solely on any wireless device for essential
communications like medical emergencies.
Using your device while flying in aircraft is prohibited. Switch
off your device before boarding an aircraft. The use of wireless
teledevices in an aircraft may be dangerous to the operation
Download from Www.Somanuals.com. All Manuals Search And Download.
127
The exposure guidelines for mobile devices employ a unit of
measurement known as the Specific Absorption Rate or SAR.
The SAR limit stated in the ICNIRP guidelines is 2.0 watts/
kilogram (W/kg) averaged over 10 grams of tissue. Tests for
SAR are conducted using standard operating positions with
the device transmitting at its highest certified power level in
all tested frequency bands. The actual SAR level of an
operating device can be below the maximum value because
the device is designed to use only the power required to reach
the network. That amount changes depending on a number of
factors such as how close you are to a network base station.
The highest SAR value under the ICNIRP guidelines for use of
the device at the ear is 0.54 W/kg.
To make an emergency call:
1 If the device is not on, switch it on. Check for adequate
signal strength.
Some networks may require that a valid SIM card is
properly inserted in the device.
2
3
4
Press
as many times as needed to clear the display
and ready the device for calls.
Enter the official emergency number for your present
location. Emergency numbers vary by location.
Press the
key.
If certain features are in use, you may first need to turn those
features off before you can make an emergency call. Consult
this guide or your service provider for more information.
Use of device accessories and enhancements may result in
different SAR values. SAR values may vary depending on
national reporting and testing requirements and the network
band. Additional SAR information may be provided under
product information at www.nokia.com.
When making an emergency call, give all the necessary
information as accurately as possible. Your wireless device
may be the only means of communication at the scene of an
accident. Do not end the call until given permission to do so.
Certification information (SAR)
THIS MOBILE DEVICE MEETS GUIDELINES FOR EXPOSURE TO
RADIO WAVES.
Your mobile device is a radio transmitter and receiver. It is
designed not to exceed the limits for exposure to radio waves
recommended by international guidelines. These guidelines
were developed by the independent scientific organization
ICNIRP and include safety margins designed to assure the
protection of all persons, regardless of age and health.
Download from Www.Somanuals.com. All Manuals Search And Download.
128
Index
settings for call diverting 112
transferring 64
camera
copying contacts 68
copyright protection. See activation
keys.
A
access points 106
activation keys 117
alarm clock 16
applications 114, 115
adjusting lighting and color 28
editing videos 31
flash 28
image setup settings 28
imaging mode 12
saving video clips 23
scenes 28
D
data connections
ending 92
B
indicators 15
date 16
device manager 92
digital rights management. See
activation keys.
backing up 20
Bluetooth 83
device address 86
headset 113
pairing 86
self-timer 27
sequence mode 27
still image camera settings 26
video recorder settings 24
security 85
switching off 87
bookmarks 70
E
editing videos 31, 32
e-mail 47
certificates 110
automatic retrieving 51
opening 51
remote mailbox 50
retrieving from mailbox 50
settings 54
C
clear screen. See standby mode.
clock 16, 17
cache, clearing 72
calendar 74
call register. See log.
calls
codes 109, 110
computer connections 83
conference call 57
connection settings 106
contact cards
viewing attachments 51
dialled numbers 64
duration 65
international 57
received 64
settings 105
F
file formats
inserting pictures 67
sending 67
storing DTMF tones 64
.jad, jar and sis 114
.jar 115
Download from Www.Somanuals.com. All Manuals Search And Download.
129
RealPlayer 78
file manager 21
fixed dialing 68
FM radio 76
media files 78, 79
memory 21, 65
memory card 20
menu, rearranging 100
messaging 47
Q
Quickoffice 95
R
G
radio 76
gallery 30
backup files 43
ordering files in albums 35, 36
presentations 34
TV out mode 34
remote SIM mode 85
ringing tones
modem 93
modes 11, 12
movies, muvees 81
multimedia messages 47
music player 39
transferring music 40
personal ringing tone 69
receiving in a text message 49
H
handsfree. See loudspeaker.
headset settings 113
help application 22
home network 19
S
security code. See lock code.
sending
N
Nokia PC Suite
contact and business cards 67
video clips 33
service commands 45
settings
calendar data 74
transferring music files to your
memory card 39
I
IAP. See access points.
indicators 15
internet. See web.
viewing device memory data 22
access codes 109
access points 106
Bluetooth connectivity 84
calendar 75
call barring 112
call diverting 112
certificates 110
data connections 106
date and time 109
O
J
office applications 95
Java. See applications. 114
P
L
packet data connections 108
PC connections 83
personalization 101
phonebook
lock code 110
log 66
loopset settings 113
loudspeaker 16
See contact cards
Download from Www.Somanuals.com. All Manuals Search And Download.
130
display 104
language 103
time 16
lock code 110
transferring content 14
transferring music 40
original settings 104
personalizing the device 100
PIN code 110
screen saver 104
UPIN code 110
U
UPIN code 110
UPnP 19, 88
UPUK code 110
USSD commands 45
UPUK code 110
shortcuts 13
SIM card
copying names and numbers 68
messages 52
sis file 114
snooze 16
software 115
songs
transferring 40
sound clips 30
sounds
muting a ringing tone 63
recording sounds 94
speed dialling 58
V
video call 59, 63
video clips 30
video player. See RealPlayer.
Visual Radio 76, 77
voice commands 114
voice dialling 58
voice mailbox 57, 112
voice messages 57
voice tags 58, 114
volume control 16, 57
W
web 70
wireless LAN 17
access point settings 107
create IAP 92
security 88
standby mode 100
svg files 34
synchronization 91
T
See also UPnP.
text messages 47
Download from Www.Somanuals.com. All Manuals Search And Download.
131
|