Nokia PC Suite 4.1
User Guide
and
PC/PDA Connectivity Guide for
Nokia 3320 and 3360
Download from Www.Somanuals.com. All Manuals Search And Download.
Legal notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Important safety notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Export Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
FCC/Industry Canada Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
System requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Compatible applications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Requirements for digital data calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Printing this guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Safety notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Infrared communications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Enable infrared communications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Interruptions to infrared communications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Important note for Windows Me users. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Before installing PC Suite . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
PC Suite installation instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Uninstall PC Suite. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Nokia Content Copier. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Compatible phones. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Content Copier basics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Copying information from the source phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Nokia Connection Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Copying information to the target phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Nokia Content Copier log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Other phones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
PC hardware setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Tour of PC Composer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Compose a new ringing tone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Edit a ringing tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Delete notes and rests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Save your new ringing tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Transfer ringing tone to your phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Transfer via infrared . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
About Standard MIDI files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Nokia PC Sync. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Configure PC Sync . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Set Calendar and Contacts properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Set PIM properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
[ 1 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Understand the basics of Synchronization. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Creating a custom contact list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Other PIM applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Number format and your PIM application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
3320/3360 modem setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Download modem driver (windows 95, 98, and Me) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Establish an infrared connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Modem installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
IR and Windows NT Workstation 4.0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Dial-up Networking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Create a new connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Connect to the network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Notes about data calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
REMINDERS! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
For America Online (AOL) users. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Modify “Locations” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
9
Before you make a data call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
TM
Connect to devices using Microsoft PocketPC OS (operating system) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Use your new modem connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
10 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
[ 2 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
1 Introduction
This guide provides you with the following information:
1
•
•
•
•
installation instructions for Nokia PC Suite 4.1.
the Nokia PC Suite 4.1 user guide.
installation instructions for the Nokia Modem Setup application for 3320 and 3360.
configuring your data/fax software for digital data calls (using your Nokia phone as a wireless modem).
• SYSTEM REQUIREMENTS
To install and run Nokia PC Suite 4.1, you need:
•
•
Nokia 3320 or 3360 phone
an Intel-compatible PC running Windows 95®, Windows 98®, Windows Millennium Edition® (ME), or Windows 2000®
Professional
•
•
•
at least 40 megabytes of free disk space
an infrared port on your desktop PC or laptop computer
a compatible PC Personal Information Manager (PIM) application for use with Nokia PC Sync
Note: Nokia Content Copier (a component of Nokia PC Suite) supports a variety of Nokia phones, some of which make their
connection to a PC via serial cable. For a list of compatible phones and connection methods, please see “Compatible phones”
• COMPATIBLE APPLICATIONS
Nokia PC Sync is compatible with the following Personal Information Manager applications:
Manufacturer
Microsoft
Application name/version
Schedule+ 7.0, 7.5
Outlook 97, 98, 2000
Outlook Express
IBM
Lotus Notes 4.5, 4.6, 5.0
Lotus Organizer 97, GS, 5.0, 6.0
• REQUIREMENTS FOR DIGITAL DATA CALLS
Before you can make digital data calls using your Nokia phone as a wireless modem:
•
•
You must subscribe to digital data services with your service provider.
Your phone must be powered up, and digital service must be available. Digital data calls are not available when roaming in an
analog network.
•
•
Your phone must be connected to your PC or handheld device via Infrared.
Your data software must be running and must be configured to recognize your Nokia phone as the active modem (instructions
to follow later in this document).
Note: This feature is available only if your service provider’s network supports digital data calls. You may also be required to
subscribe to digital data services. Please check with your service provider prior to sending or receiving digital data calls.
• PRINTING THIS GUIDE
You may also find it helpful to print this guide for future reference.
No other applications should be running during installation of PC Suite and the modem setup. Therefore, reading this guide using
Adobe Acrobat reader during installation is not recommended. Printing a copy of this guide provides you access to the instructions
during the installation process.
[ 3 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
• ABBREVIATIONS
1
For the purposes of this user guide, the following abbreviations are used:
Abbreviation
Description
Refers to both desktop and laptop computers
Infrared
PC
IR
PIM
Personal Information Manager (PC-based software program)
• SAFETY NOTES
1
2
Please make backup copies of all important data to protect against possible loss or alteration.
When connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible
products.
3
4
To avoid any potential loss of data, you should not make or receive calls while synchronizing data between the phone and a PC.
Do not point the IR beam at anyone’s eyes or allow it to interfere with other IR devices.
• INFRARED COMMUNICATIONS
When transferring information between your phone and PC using the various PC Suite applications, an infrared connection
between phone and PC is required. The preferable distance between the two devices in an infrared connection is a range of three
inches to three feet maximum. There must be no obstructions between the two devices and the IR ports of the two devices have
to be pointing at each other.
Your Nokia phone is a Class 1 Laser Product.
Enable infrared communications
It is not necessary to enable infrared communications for users of Windows Millennium Edition (ME) and Windows 2000 prior to
using this feature. The infrared port is always active.
If you use Windows 95 or Windows 98, you can use the infrared control panel to activate or deactivate infrared communications.
During the PC Suite installation process, the installer application activates infrared communications on your PC. The infrared port
on your PC remains active until you deactivate it.
To enable infrared communications on your phone, please refer to the infrared section in your phone’s user guide.
Interruptions to infrared communications
Windows provides visual and audible notification when it senses an
interruption to infrared communications between your phone and PC.
Windows allows you to re-establish infrared communications between
the two devices so it can re-send the data that was being transferred
when the interruption occurred.
If the infrared connection between your phone and PC has not been re-established within 15 seconds, a “time-out” occurrs,
meaning Windows no longer searches for your phone and terminates the infrared connection.
[ 4 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Install Nokia PC Suite 4.1
2 Install Nokia PC Suite 4.1
Nokia PC Suite 4.1 is a collection of powerful tools that you can use to manage your phone’s features and data. PC Suite consists
of the following components:
2
•
Nokia Content Copier allows you to copy data between two Nokia phones, to back up your phone’s data to your PC, and erase
data from your phone.
•
Nokia Connection Manager allows you to monitor the IR connection between your phone and PC and switch to a different
type of connection (cable vs. infrared) when copying data from one phone to another.
•
•
Nokia PC Composer allows you to create new ringing tones for your phone.
Nokia PC Sync allows you to synchronize contacts and calendar items between your phone and PIM applications such as
Microsoft Outlook and Lotus Organizer.
• IMPORTANT NOTE FOR WINDOWS ME USERS
Your phone also functions as a wireless modem and is designed to be detected by Windows Plug and Play. During the PC Suite
installation process, you are prompted to enable infrared communications on your phone, then align the infrared ports of the 2
devices.
Because infrared is always active on your PC (including automatic software installation for Plug and Play devices), the Windows
Add New Hardware Wizard detects your phone as a new hardware device during the PC Suite installation. This interferes with the
PC Suite software installation process.
Before installing PC Suite
Nokia recommends that Windows Me users perform the modem installation prior to installing PC Suite. Please see “3320/3360
modem setup” on page 19 and perform this task prior to installing Nokia PC Suite. Once you have performed the modem
installation, you may continue with the installation instructions below.
• PC SUITE INSTALLATION INSTRUCTIONS
Nokia suggests that you download the setup application to a location of your choosing, rather than trying to run the application
from its current location.
Note: Download time for this file (16 mb) may vary, depending on the type of Internet connection you have (dial-up vs. DSL/cable),
connection rate, and Internet traffic.
Once the software download is complete:
1
2
Double-click the installation file PC Suite 4.1.exe, located on your hard drive.
Click Next to accept the location of the temporary installation files, or click Change to select a different location.
3
4
Click Next to begin the software installation wizard, then click Yes to accept the end-user license agreement.
Review the safety notes, then click Next.
[ 5 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Install Nokia PC Suite 4.1
5
6
.Click Next to install all PC Suite components, or clear the
check boxes of the components you do not want to install.
Select the language you wish to use with PC Suite, then
click Next.
2
Note: If you have a PIM application installed on your PC
(Outlook, Lotus Organizer, etc.) and you want to use
it with Nokia PC Sync, it is recommended that you
select the same language used by your PIM.
7
8
Follow the instructions provided on the Infrared
connections screen.
Continue through the installation wizard, then click Finish
to restart your PC.
CHANGE LANGUAGE
The language chosen during installation for PC Suite applies to
all of the PC Suite components and Help applications. If you
need to change PC Suite to a different language, you must reinstall PC Suite.
• UNINSTALL PC SUITE
If you need to remove PC Suite (including all components), please use Add/Remove Programs (located in Control Panel). Remember
to close any PC Suite applications that are running before you begin.
TO REMOVE PC SUITE 4.1:
1
2
3
4
5
6
7
Click Start, point to Settings, then click Control Panel.
Double-click Add/Remove Programs.
Scroll through the list of installed applications, then click Nokia PC Suite 4.1.
Click the Add/Remove button.
Click Remove from the Nokia PC Suite Setup window, then click Next.
Follow the on-screen instructions until the setup wizard has completed removing the program.
Restart your computer to complete the removal process.
[ 6 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Nokia Content Copier
3 Nokia Content Copier
Nokia Content Copier is a powerful application that allows you to perform
the following tasks:
•
•
•
Copy data from a compatible phone to your 3320/3360 (or between 2
Nokia 3320/3360 phones).
3
Back up your phone’s data to your PC and then restore the data back
to your phone.
Erase data from your phone.
• COMPATIBLE PHONES
One of the most powerful features of this application is its support of other compatible phones. This capability is especially useful
if you are upgrading to a new handset and want to transfer data from your old phone to your new one. You can also use this
application to transfer information between other 3320/3360 phones in your family.
The following table shows a list of phones compatible with Nokia Content Copier (other than 3320 and 3360), as well as the method
of connection to the PC:
Nokia model:
5190
Method of connection:
DAU-9P serial cable
6190
DAU-9P serial cable
7160
DLR-3P serial cable and IR (infrared)
DLR-3P serial cable and IR (infrared)
IR (infrared)
7190
8290
8890
IR (infrared)
Important: Content Copier does not support copying data between any of the phones listed above. Data can only be read from
these phones, then copied to 3320/3360.
Note: Nokia Content Copier does not support certain 5100 and 6100 series phones. For more information on specific models of
• CONTENT COPIER BASICS
Nokia Content Copier application utilizes wizards to help you
perform the tasks listed above. If you are copying data from one
of the compatible phones above using the data cable, please
make sure the phone is connected to your PC via cable before
you begin.
Content Copier is driven by wizards that lead you through the
various tasks. Launch Content Copier from the Start Menu (Start
- Programs - Nokia PC Suite 4 - Content Copier), then select
the task you would like to perform. Follow the on-screen
instructions to complete the task you want to perform.
The following pages contain basic information and tips on using
Nokia Content Copier.
Note: Please be aware that many of the compatible phones have features not found in 3320/3360. While it may be possible to
read this information into your PC and save it, you may not be able to transfer incompatible data types (example: To do list
items) to your 3320/3360.
[ 7 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Nokia Content Copier
Important: Windows Millennium Edition (ME) users have no way of disabling the Plug and Play software installation of your Nokia
phones as a wireless modem. Windows ME launches the Add New Hardware Wizard immediately upon detection of
your phone via Infrared. Before proceding with any Content Copier tasks, please click the Add New Hardware Wizard’s
Cancel button. 3320/3360 users should have already performed the modem installation instructions, found on
Copying information from the source phone
If you select either the Copy data from one phone to another or Copy
data from a phone to a PC options, Content Copier will transfer all
compatible data types (Phone book, Calendar, To Do, Caller groups, etc.)
from the compatible phone (or “source” phone).
3
•
If you are copying the data from the source phone to your Nokia 3320
or 3360, the data is stored in your PC’s memory temporarily. Once you
have connected your 3320/3360 (“target” phone) via infrared, Nokia
Content Copier transfers the information from temporary storage
into your phone.
•
If you are copying your phone’s data and want to save it on your PC,
Nokia Content Copier guides you through the process of saving the
information to a comma-separated value text file (.csv) on your PC’s
hard drive.
SAVE THE SOURCE PHONE DATA
Once the source phone’s data has been read, Content Copier allows you
to save the information to your PC’s hard drive. Click the Save Data
button, then navigate to the location on your hard drive where you want
to store the information.
Nokia Content Copier automatically names the files for you, based on the
type of data that is read from the source phone.
Nokia Connection Manager
You may need to use Nokia Connection Manager to select the type of connection you want Content
Copier to use during various stages of the process. For example, if you select Copy data from one phone
to another, and the source phone uses a serial cable, click Content Copier’s Connection button to launch
Connection Manager. Then select the correct cable option for the source phone.
To switch connection type while using Content Copier:
1
Establish the appropriate connection between your phone and PC (via
IR, DLR-3P, or DAU9-9P), then click the Connection button.
2
3
4
Click the desired connection type, then click Select.
Allow Nokia Connection Manager to detect your phone.
Click OK to return to Nokia Content Copier.
Note: If your phone is not detected right away, switch to one of the other
connection types, then back to the desired connection type. This
forces Connection Manager to redetect your phone.
Note: If you are copying data from one phone to another and the source phone uses an infrared connection, stop the infrared
connection between phone and PC. Allow the Windows warning message regarding interrupted infrared communications
to completely time-out before aligning your 3320/3360 with your PC’s infrared port. By doing so, you allow Connection
Manager to detect your 3320/3360 more quickly.
[ 8 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Nokia Content Copier
Copying information to the target phone
Before you can copy information to the target phone, you need to load
the information into the PC’s memory.
•
If you selected Copy data from one phone to another, you should
have already gone through the steps needed to read information from
the source phone.
•
If you selected Copy data from a PC to a phone, you should have
already saved the source phone’s data to your PC via the Copy data
from a phone to a PC option. Click Next, then click the Select source
Folder button. Locate the data (.csv) file containing the information
you want to use.
3
Once the source phone’s information has been read into your PC’s memory (or loaded from your PC’s hard drive), you are asked to
determine the types of information you want copied into your 3320/3360. The compatible data types are displayed along with the
ability to select the types of data you wish to transfer.
Use the check boxes next to the data types to select or deselect the information you want to copy to your phone, then click Next.
Nokia Content Copier log
When you have successfully completed one of the Nokia Content Copier tasks, the Finish screen is displayed along with a log of
the tasks that were just performed. At the Finish screen, you have the following options:
•
•
•
Click Save to save the log (.LOG) file to your PC’s hard drive.
Click New Action to return to the beginning of the Nokia Content Copier wizard.
Click Finish to exit Nokia Content Copier.
• OTHER PHONES
Due to software and hardware differences between generations of phone technology, the following phones are not compatible with
Content Copier:
Protocol
TDMA
Nokia model number
5120, 5125, 5160, 5165
6120/6120i, 6160/6160i/6160m
6161/6161i, 6162/6162i/6162m, 8260
CDMA
3280, 3285
5170/5170i, 5180/5180i, 5185
6180/6180i, 6185/6185i
GSM1900
3390, 3395
[ 9 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Nokia PC Composer
4 Nokia PC Composer
Nokia PC Composer allows you to create new ringing tones for your 3320 or 3360 phone. Once you create a new ringing tone, you
can transfer it to your phone via infrared.
PC Composer also allows you to open Standard MIDI files (type I), edit them, and convert them to ringing tones. You can save your
ringing tones as either .mid (MIDI) or .ott (ringing tone) file formats on your PC’s hard drive.
PC hardware setup
PC Composer “plays” the notes as they are written to the music staff. You can also play back the entire composition. Before you
begin writing, you must select your PC sound card’s MIDI playback device.
4
1
2
Click Start, point to Programs, point to Nokia PC Suite, then click Nokia PC Composer.
Click Tools, point to Player Device, then click the option for your sound card’s internal MIDI playback device.
Once your MIDI playback device is set, you can hear each note as it is added to the staff or the entire ringing tone (when you click
the Play button).
• TOUR OF PC COMPOSER
Editing tools
(cut, copy, paste)
File management
(new, open, save)
Send tone via Infrared
Raises a note’s
pitch 1/2 step
Play ring tone
Stops playback
Adjust tempo
Adds dot to
selected note
or rest
Selection tool
Rest values
Note values
Insert point
Status bar
displays help
texts and
Note counter
Connection status
toolbar tips
You can launch PC Composer without having an infrared connection between the phone and your PC. The connection status
indicator displays the status of the connection between your phone and PC.
[ 10 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Nokia PC Composer
• COMPOSE A NEW RINGING TONE
Your new ringing tone can consist of up to approximately 70 notes and rests. The phone
discards any notes or rests beyond 70. Use the note counter to the right of the Status
Bar to monitor the length of your new ringing tone.
CREATE A NEW RINGING TONE
1
Launch Nokia PC Composer (click Start, point to Programs, point to Nokia PC Suite,
then click Nokia PC Composer).
Insert point
2
3
Click the appropriate note (or rest) button.
Using the insert point, click the desired line or space on the staff (result: the note is
placed on the staff, and is played by your PC’s sound card).
4
4
5
Continue entering the desired notes and/or rests until you have completed your new tune.
Click the Play button
to replay the ringing tone from the beginning.
Edit a ringing tone
You can edit the pitch or duration of the notes already entered on the music staff.
CHANGE THE PITCH OF A NOTE
1
Click the Selection tool button
on the toolbar.
2
Move the cursor over the note you wish to change (result: the arrow cursor changes
to a hand)
3
Drag the note up or down on the staff to the correct location.
CHANGE THE DURATION OF A NOTE OR REST
1
2
3
Click the desired note button (or rest button) on the toolbar.
Move the cursor over the note or rest you wish to change (result: insert point appears)
Click the note or rest to replace it with the new note value.
Delete notes and rests
You can delete a wrong note/rest or group of wrong notes/rests at any time.
DELETE A SINGLE NOTE/REST
1
Click the Selection tool button on the toolbar.
2
Click the note or rest you want to delete, then press your keyboard’s Delete (DEL) button.
DELETE MULTIPLE NOTES/RESTS
1
Click the Selection tool button on the toolbar.
2
Draw a bounding outline (marquee) with the mouse around the group of notes or
rests you want to delete (result: the group of notes are highlighted in blue).
3
Press your keyboard’s Delete (DEL) button.
Save your new ringing tone
When you are ready to save your new ringing tone, click the Save button on the toolbar. Use the Save as dialog box to set file name
and location to save the new file. Default file type for your new ringing tone is .mid (MIDI). However, you need to save your work
as OTA (ringing tone) format (.ott) before sending your new ringing tone to the phone. Use the Save as type drop down box to
select the desired file type.
Note: You can create and save as many new ringing tones as you have space on your hard drive. However, your phone can only
hold up to 10 new ringing tones at any given time.
[ 11 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Nokia PC Composer
• TRANSFER RINGING TONE TO YOUR PHONE
Once you have created a new ringing tone and have saved it to your PC, you can transfer the tone to your phone using infrared.
When your phone receives the new ringing tone, it will display the message New ringing tone received. Press the Options key and
scroll to the following options:
•
•
•
Play - plays the new ringing tone
Save - saves the ringing tone to your phone
Discard - discards the new tone and returns you to the Start screen.
Transfer via infrared
4
Before transferring the ringing tone to your phone, make sure you have established an infrared connection between your phone
and PC. Check the status indicator in the lower right corner of the PC Composer window to verify the status of your connection.
Important: Make sure the Set Name option from the Tools menu is checked/enabled. This feature automatically prompts you to
name your new ringing tone before transferring it to your phone. If this feature is disabled, all new ringing tones are
stored as Nokiatune.
To transfer your ringing tone, click the Update to Phone button on the toolbar
(or select Update to Phone from the Tools
menu).
• RINGING TONES FROM MIDI FILES
Nokia PC Composer allows you to open Standard MIDI files, then convert the data to ringing tone format. Now you can carry your
favorite PC MIDI file as a ringing tone in your phone.
About Standard MIDI files
Standard MIDI files of popular music frequently consist of multiple instruments (bass, drums, organ, etc.). Typically, there is also a
track dedicated to the song’s melody. There are two types of Standard MIDI files:
•
•
Type 0 files - 1 track of MIDI data containing all the various instruments; each instrument assigned to different MIDI “channel.”
Type 1 files - each instrument has its own dedicated track and MIDI channel. Track/instrument names are embedded in the file
as text information.
PC Composer’s interface interprets the multiple track information and allows you to choose the correct track or instrument.
Before you begin
If the MIDI sequence you want to use contains too many notes, the following
error message is displayed when trying to open the file:
Nokia PC Composer processes MIDI notes in octave 5 and 6 of the MIDI
keyboard. If your MIDI sequence contains notes outside this range, the
following error message is displayed when opening the file:
OPEN A STANDARD MIDI FILE
To open a MIDI file:
1
2
Click the Open button
(or select Open from the File menu).
Locate the MIDI file you want to use as a ringing tone, then click Open.
[ 12 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Nokia PC Composer
3
Use the Track list box’s drop-down arrow and locate the desired track.
Track list
box
4
4
Click the Convert to Tone button to convert MIDI information to ringing tone format.
Edit and save
You may need to edit the converted MIDI information (adjust note lengths, remove extra rests, etc.) so that the tune plays correctly.
When you have completed editing the ringing tone, you can save your work in ringing tone (.ota) format, and send the new tone
to your phone. For more information on saving, please refer to “Save your new ringing tone” on page 11. For more information on
[ 13 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Nokia PC Sync
5 Nokia PC Sync
Nokia PC Suite allows you to synchronize the contact and calendar information in your PC’s Personal Information Manager (PIM)
software and your Nokia mobile phone. You can use Nokia PC Sync to keep information up-to-date in both locations.
PC Sync supports a variety of PIM applications, including Microsoft Outlook, Outlook Express, and Lotus Organizer. PC Sync also
offers a wide variety of synchronization options so that you can personalize the way you want your information managed.
Warning: To avoid any potential loss of data, you should not make or receive calls while synchronizing data between the phone
and your PC. Nokia PC Sync cannot be used while a data call is in progress. Likewise, you cannot initiate a data call
while synchronizing data with PC Sync.
Important: Remember to make backup copies of all important data to protect against possible loss or alteration.
• CONFIGURE PC SYNC
5
The first time you run Nokia PC Sync, you must configure PC Sync to work with
your PIM application. Once you have customized PC Sync, you can proceed
with synchronizing your PIM data with your phone.
1
2
Establish an infrared connection between your phone and PC.
Launch Nokia PC Sync (click Start, point to Programs, point to Nokia PC
Suite, then click Nokia PC Sync).
3
4
Select your PIM application from the drop-down list, then click OK.
Click the More button to view a summary of current/default settings.
Set general synchronization properties
1
Click the General tab, then select the information you want to
synchronize.
Note: Calendar items are synchronized with your phone’s Reminders
menu.
2
3
Click the desired option for automatic synchronization (example: Every
connection).
Click the Advanced button to specify additional options, including resolving synchronization conflicts (see below)
SYNCHRONIZATION CONFLICTS
A synchronization conflict occurs when you change or edit a contact or
reminder in both your phone and PIM between synchronization sessions.
By default, PC Sync resolves the conflict by treating your phone as the
correct information source.
To change conflict resolution properties, click the option associated with
your PIM application.
Set Calendar and Contacts properties
Your PIM application’s storage capabilities are much more extensive than
those of your phone. Use the Calendar and Contacts tabs to define the kinds
and amount of information synchronized.
For more information about the capacity of your phone’s phone book and
reminder list, please refer to the technical specifications section of your
phone’s user guide.
1
2
Click the Calendar/To do tab.
Use the drop-down lists to define the range of time PC Sync uses during
synchronization.
[ 14 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Nokia PC Sync
3
4
Click the Contacts tab.
Select the details you want synchronized with your phone.
CONTACT DELETIONS
By default, contacts deleted from your phone are not deleted from your PIM
when you synchronize. If you accidentally delete a contact from your phone,
you can restore it by synchronizing again.
Deselecting the Ignore contact deletions option instructs PC Sync to
permanently delete the corresponding contact in your PIM. Choose this option
only when you are certain you want PC Sync to delete the PIM contact (and all
details) associated with the deleted phone book entry.
Warning: This action cannot be undone!
Set PIM properties
5
The last properties tab is labeled with the name of your PIM application. Use this properties tab to modify how PC Sync
communicates with your PIM’s resources. For example, if the number of contacts in your PIM application exceeds the phone’s
memory, you should consider creating a subset of your main contact database folder. Use this folder to store those names, numbers,
and text information you want to appear in your phone book.
Then, use the PIM properties tab to select the location of the new folder containing the set of contacts you have defined for use
with your phone.
Synchronizing for the first time
Once you have customized PC Sync for your uses, you are ready to synchronize
your phone and PIM.
1
2
3
4
Click the Summary tab
Click the Synchronize Now button.
Observe the synchronization status indicator.
Click the OK button when notified that synchronization is complete.
Note: Please refer to the PC Suite Troubleshooting document in the event synchronization is not successful, or if PC Suite notifies
you of errors. A link to this document can be found in the Nokia PC Suite Program Group.
• UNDERSTAND THE BASICS OF SYNCHRONIZATION
Nokia PC Sync remains running in the background after you synchronize for the first time. PC Sync places an icon in the Task Bar
tray, indicating that the application is running. The colors of the icon change, depending on the status of the infrared connection
between your phone and PC. Please refer to the examples below:
Blue and green
indicate infrared
connection between
phone and PC.
Yellow and gray
indicate no infrared
connection present
between phone and PC.
Exit PC Sync
Once setup and first synchronization is complete, you can either leave the program running in the background, or you can exit PC
Sync. To exit PC Sync:
•
right-click the PC Sync tray icon
, then click Exit.
Start PC Sync
You have two options for launching Nokia PC Sync:
•
•
on an as-needed basis from the Start menu
automatically upon startup
[ 15 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Nokia PC Sync
TO ENABLE PC SYNC ON STARTUP
1
2
3
Establish an infrared link between your phone and PC.
Launch PC Sync from the Start menu.
Right-click the PC Sync tray icon, then click Enable on startup
View other PC Sync options
There are several other options available from the PC Sync options menu (from the
tray icon). With the phone connected to your PC via infrared, right-click on the tray
icon, then click any of the following options:
•
•
•
•
•
•
About - to view information about the PC Sync program
Connection - to check the status of the infrared connection
Configuration - to modify current PC Sync settings (change frequency of synchronization, types of data synchronized, etc.)
Synchronize - to initiate synchronization of data
5
View Last Report - to view information about the last synchronization attempt
Help - to launch the on-line Help files
To disable the auto start features, right-click on the PC Sync icon, then click Enable On Startup again.
• USE A DIFFERENT PIM
If at some point you change PIM applications or upgrade to a newer version of your current PIM, you must configure PC Sync to
work with the new application. Select New Synchronization from the Nokia PC Suite program group, then follow the instructions
• CREATING A CUSTOM CONTACT LIST
Users who have more than 200 names and numbers in their PIM should create a
custom contact list or subset of their master contact list. Depending on the PIM
application you use, you may need to create a new contact database file or create a
new folder to store the custom contact list.
Outlook users
Outlook users can create folders and sub-folders in their Outlook database files. To
create a custom contact list, first create a new folder to store contacts. Then copy the
desired contact information from your main contacts folder to the new folder. PC Sync
allows you to synchronize your phone with the Outlook contacts folder of your
choosing.
CREATE A NEW FOLDER FOR PHONE CONTACTS
To create a new sub-folder for a custom contact list:
1
2
3
4
Click File, point to Folder, then click New Folder.
Type the name of your new folder (example: Phone list).
Click the Folder contains drop-down arrow, then click Contact Items.
Select a location for your new folder (example: click Contacts to make Phone
list a sub-folder of your main Contacts folder).
5
Click OK to confirm your selection.
COPY CONTACTS TO CUSTOM PHONE LIST
To copy contact information into your new sub-folder:
1
2
Click the Contacts button on your Outlook bar.
Select the contacts you want to appear in your custom list.
Tip: Hold the CTRL key to select multiple contacts that are not adjacent to each other.
Click Edit, then click Copy (or press CTRL + C).
3
4
Select your custom folder from the Folder List (example: Phone list), or press CTRL + Y to display Go to Folder dialog box.
[ 16 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Nokia PC Sync
5
Click Edit, then click Paste (or press CTRL + V) to paste copies of the selected contacts into the new folder.
Important: If you decide to use the drag-and-drop method between your main Contacts folder and the new custom folder, make
sure to hold the CTRL key while dragging, then release the mouse button before releasing the CTRL key. Failure to use
the CTRL key during drag-and-drop moves all selected contacts to the new folder.
UPDATE PC SYNC’S OUTLOOK SETTINGS
To update PC Sync’s settings to synchronize with your custom list:
1
2
Establish an infrared connection between your phone and PC.
Launch Nokia PC Sync from your PC’s Start menu.
If you have PC Sync enabled on startup, right-click the PC Sync tray icon, then click Configuration.
Click the Microsoft Outlook tab.
3
4
Click the Contacts browse button
, then select your custom folder. Click
5
OK to confirm your selection.
5
Click the Summary tab, then click Synchronize Now to synchronize your
phone and custom phone list.
Other PIM applications
Other PIM applications (such as Lotus Organizer) allow you to create a completely new database file using commands from the
application’s File menu. Once you create a new database file, copy the desired contact information from your main contacts file
to the new contacts file. PC Sync allows you to synchronize your phone with the contacts file of your choosing.
CREATE A NEW DATABASE FILE (EXAMPLE: LOTUS ORGANIZER)
To create a new Organizer database file:
1
2
3
4
Launch Lotus Organizer.
Click File, then click New.
Click File, then click Save As.
Enter a name for your custom phone list (example: Phone list).
COPY CONTACTS TO CUSTOM PHONE LIST
To copy contact information into your new sub-folder:
1
From File Manager, open your default Organizer database
(c:\lotus\work\organize\<filename>)
Selected
records
2
3
Click the Contacts tab, then click the desired alphabet tab.
Select the desired contacts for your custom list.
Tip: Hold the CTRL key to select multiple contacts that are not
adjacent to each other.
4
Continue by clicking subsequent alphabet tabs and selecting the
desired contacts.
5
6
Click the Copy button (or press CTRL + C).
Use the Windows Task Bar to switch back to your new contacts
list, then click the Contacts tab.
7
Click the Paste button (or press CTRL + V) to paste copies of the
selected contacts into the new list.
UPDATE PC SYNC’S LOTUS ORGANIZER SETTINGS
To update PC Sync’s settings to synchronize with your custom list:
1
2
Establish an infrared connection between your phone and PC.
Launch Nokia PC Sync from your PC’s Start menu.
If you have PC Sync enabled on startup, right-click the PC Sync tray icon, then click Configuration.
[ 17 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Nokia PC Sync
3
4
Click the Lotus Organizer tab.
Click the Contacts browse button
OK to confirm your selection.
, then select your custom folder. Click
5
Click the Summary tab, then click Synchronize Now to synchronize your
phone and custom phone list.
• NUMBER FORMAT AND YOUR PIM APPLICATION
Your PIM application may automatically reformat phone numbers for dialing with GSM wireless phones (e.g. adding +1 to long-
distance phone numbers). For example, a phone number outside of your home area code may be displayed in your PIM as follows:
+1 (800) 555-1234
When this number is synchronized with your phone, the + character is copied as a part of the phone number. Your wireless network
does not recognize this special character as a valid part of the phone number.
5
Please make sure all numbers in your PIM are formatted correctly for use with your mobile phone by removing the + character
from phone numbers.
[ 18 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
3320/3360 modem setup
6 3320/3360 modem setup
Your phone can function as a wireless modem when connected to your PC via Infrared. Once your phone is installed and configured
properly, your phone works in conjunction with your existing data software, allowing you to connect to the Internet or check e-mail
wherever you are.
Note: This feature is available only if your service provider’s network supports digital data services. A subscription to these services
may also be necessary. Please check with your service provider prior to making or receiving digital data calls.
PRIOR TO MAKING OR RECEIVING DIGITAL DATA CALLS:
•
You must subscribe to digital data services with your service provider.
•
Your phone must be powered up, and digital service must be available. Digital data calls are not available when roaming in an
analog network.
•
•
•
Your PC’s infrared port must be configured properly (internal or external port).
You must establish an infrared connection between your PC and your phone.
Your data software must be running, and configured to recognize your Nokia phone as the active modem.
6
VIRTUAL COM PORTS
Hardware resources between your computer’s physical COM ports and the infrared port are shared. Windows creates "virtual" COM
ports to accommodate connections between your computer and infrared devices. If your infrared port uses COM1, your phone
should be assigned to COM4; if your infrared port uses COM2, your phone should be assigned to COM5.
• DOWNLOAD MODEM DRIVER (WINDOWS 95, 98, AND ME)
Note: Windows 2000 Professional users, please see “Infrared and Windows 2000 Professional” on page 20 for more information
on modem setup for your system.
During the modem installation process, Windows looks for software specific to the new device being installed. The modem driver
for your phone can be found in the 3320/3360 product section of:
Since the Add New Hardware Wizard for all Windows operating systems searches the A:\ drive for device drivers first, Nokia
recommends that you download this file and save it to a floppy diskette.
Note: If you choose to save the file to your hard drive, please make note of the path to the file as this information is required to
complete the installation successfully. Depending on your operating system, locating this file on your hard drive may add
additional steps to the install process.
• GETTING STARTED (WINDOWS 95, 98, AND ME)
Before you can make or receive digital data calls, you must do the following:
1
2
3
Establish an infrared connection between your PC and your phone.
Install your phone as a modem connected via infrared.
Configure your data software to use your phone as the active modem for data and fax calls.
Establish an infrared connection
The preferable distance between the two devices making an infrared connection is a range of three inches (7.5 cm) to three feet
(.9 m) maximum. There must be no obstructions between the two devices, and the IR ports of the two devices must be pointing at
each other.
ENABLE INFRARED COMMUNICATIONS ON YOUR PC AND PHONE
1
Double-click the Infrared icon in the Control Panel (Windows 95 and 98 only). Windows ME users, please go
to step 4).
If this icon does not appear in the Control Panel, see “Install infrared support for Windows 95” on page 20.
Tip: Windows 98 users can also launch the Infrared Monitor by double-clicking
the Infrared Monitor icon in the system tray.
[ 19 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
3320/3360 modem setup
2
Click the Options tab, then select Enable infrared communication. Verify that the install software option for Plug and Play
devices is selected.
3
4
5
6
Click Apply, then click the Status tab.
On your phone, press Menu, scroll to Infrared, then press Select.
Align the infrared ports of both devices.
When a successful infrared connection has been made, the
infrared monitor indicates that your phone has been found.
Modem installation
The Windows Add New Hardware Wizard launches immediately after
the infrared monitor displays the connection status between phone
and PC.
To complete modem installation:
1
2
3
4
5
6
Insert the floppy diskette containing the modem driver file when
the Add New Hardware Wizard screen appears.
6
Click Next as necessary until Windows asks you for the location
of the modem driver file.
Select A:\ or the floppy drive option (as necessary), then click
Next.
The Wizard indicates it has located the correct software for your
phone. Click Next to finalize the installation.
Click Finish when Windows informs you that it has installed the
device successfully.
Verify that your Nokia phone connected via infrared appears in the list
of modems.
Complete the process by configuring your data software to work with the
new infrared modem configuration. For more information, refer to
• INSTALL INFRARED SUPPORT FOR WINDOWS 95
If you have the first releases of Windows 95, you may not have the most recent files to support infrared. You may need to download
the Windows 95 Infrared Support version 2.0. This software can be found in the software download section of Microsoft’s web site:
TO DETERMINE WHETHER YOU HAVE THE MOST RECENT WINDOWS 95 INFRARED SUPPORT SOFTWARE:
1
2
3
Double-click Add/remove programs in the Control Panel.
Scroll through the list of installed applications to find Infrared Support for Windows 95 version 2.0.
If this software is not listed, proceed to Microsoft’s web site. Download and install the necessary files (w95ir.exe).
Note: For more information on installation and configuration of Infrared Support for Windows 95 version 2.0, please refer to the
Readme files that accompany the update software.
• INFRARED AND WINDOWS 2000 PROFESSIONAL
Microsoft redesigned infrared implementation with the release of Windows 2000 Professional. In order for Windows 2000 users to
make a serial connection between phone and PC via infrared, please download Security Update, August 19, 2001 from:
This security update can be located in the Critical Updates section of the Windows 2000 download site.
WINDOWS 2000 MODEM SETUP INSTRUCTIONS
1
Download and install the security update from Microsoft’s web site, then reboot your PC.
2
On your phone, press Menu, scroll to Infrared, then press Select.
[ 20 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
3320/3360 modem setup
3
Align the infrared ports on your phone and PC.
When a successful infrared connection has been made, the infrared
monitor indicates that your phone has been found. Windows 2000
installs your Nokia phone as Standard Modem over IR link.
Confirm successful installation of your phone via the Phone and
Modem Options Control Panel. Use this new device with your data
application (example: Dial-up Networking).
• IR AND WINDOWS NT WORKSTATION 4.0
Microsoft does not support infrared for Windows NT Workstation 4.0.
6
[ 21 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Configure your data software
7 Configure your data software
• INTRODUCTION
Before you can use your phone to send and receive data calls, you must configure your data software so that it uses your phone
rather than your existing modem. You may consider creating a separate set of dialing properties to use when your phone is
connected to your computer, rather than changing any existing settings.
The following pages are designed to help you configure some of the more popular applications for use with your Nokia phone.
Dial-up Networking
You may be using Microsoft’s Dial-up Networking feature to connect to your Internet service provider, or to make a remote
connection to your corporate network (including dialing in to corporate E-mail server using programs such as Microsoft Mail,
Microsoft Outlook, or Lotus cc:Mail).
Rather than altering the existing configurations you use when dialing with your existing modem, consider creating a new
connection exclusively for use with your Nokia phone (as detailed below).
BEFORE YOU BEGIN
You need the phone number for your Internet service provider or for your company’s remote access server. When testing the new
connection, you also need your user name and password.
7
Create a new connection
1
Double-click the My Computer icon, then double-click the Dial-up Networking folder.
Windows 2000 and Windows ME users: Click Start, point to Settings, then click Dial-up Networking.
Double-click the Make New Connection icon.
2
3
4
Type a name for your new connection (example: Internet-Nokia phone).
Click the drop-down arrow and select your Nokia phone as the modem to use, then click Next.
5
6
7
Enter the area code, telephone number, and country code (if necessary), then click Next.
Click Finish to save the new configuration in your Dial-up Networking folder.
Make sure to configure any necessary network parameters for this connection prior to dialing (IP address of DNSor WINS, etc.).
Note: For more information on configuring your network connection, please consult your Internet service provider or your
company’s help desk.
Connect to the network
Make sure you establish an infrared connection between your phone and PC before making a digital data call.
1
2
3
Double-click the new connection (example: Internet-Nokia phone).
Enter your user name and password, then click Connect.
Your phone will display Connecting... while establishing a connection. Once a successful connection has been made, Data call
appears on the phone’s screen.
[ 22 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Configure your data software
Note: Your Windows operating system displays its normal series of messages while the connection is being established and
verified.
Note: Your wireless service provider must support digital data for this feature to work. Contact your service provider to verify that
this service is available in your area.
Notes about data calls
•
Avoid terminating a call by pressing your phone’s
temporarily and could cause loss of data.
key. This action may cause your data application to lock up
•
•
Data calls cannot be initiated using your phone’s keypad. All data calls must be initiated using the data software.
Any touch tones (DTMF tones) needed for calling cards, special long-distance access numbers, etc. must be programmed into
the dialing string.
• OTHER DATA APPLICATIONS
There are several other types of telecommunications applications that can be used with your Nokia phone and your computer. Some
of these include:
•
•
•
Terminal Programs - used to connect to BBS services (bulletin board system) and mainframe or mini-mainframe
computers. Quarterdeck’s Procomm Plus, Microsoft HyperTerminal, Microsoft Works (Communications Module), R-Link,
and P-Term are just a few examples of this type of program.
7
Remote Administration - used to remotely access your home or office computer for file sharing or remote control.
Symantec’s PCAnywhere, McAfee’s Remote Desktop and Reach Out, Farallon’s Timbuktu, Claris’ Apple Remote Access, and
Attachmate’s EXTRA! are a few examples of this type of program.
On-line Services - used to access the Internet, or discussion and information forums within the service. On-line services
provide their own proprietary software interface for accessing their service. America Online, CompuServe, MSN (Microsoft
Network), and Prodigy are just a few on-line service providers that use their own proprietary software.
Note: These examples are provided for your information only. Nokia does not endorse or provide support for any of the above
applications or services.
REMINDERS!
Before you can use your Nokia phone with ANY data program, you must first do the following:
•
•
Establish an infrared connection between your phone and PC.
Use the data program’s setup menu to set your Nokia phone as the active modem. Consult the program’s User Guide or Help
menu for more information.
•
Review the information, “Requirements for digital data calls” on page 3.
• FOR AMERICA ONLINE (AOL) USERS
Your America Online software can be configured to use your Nokia
phone as a wireless modem.
MODEM SETUP
To add your Nokia phone as a new modem to AOL’s connection setup:
1
2
3
4
From the Sign On screen, click SETUP.
Click Expert Setup, then click the Modems tab.
Click the Expert Add button.
Verify that Modem (telephone line connection) is selected as the
type of connection device you want to add, then click Next.
5
6
7
Select Standard (Hayes Compatible) from the list of modems.
Select the COM port assigned to your PC’s infrared COM port.
Set the port speed to 9600 bps, then click OK.
[ 23 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Configure your data software
Modify “Locations”
Now that your Nokia phone is configured for use by the AOL software, you need to modify
your Locations settings to use your Nokia phone as the active modem.
LOCATIONS SETUP
To modify an existing location:
1
2
3
From the Connection Setup screen, click the Locations tab.
Double-click the number for the location you wish to use with your Nokia phone.
Click the Connect using drop-down arrow, then click Modem:
Standard (Hayes compatible) on COMnn (where nnis COM port
for your PC).
4
5
Click the Speed drop-down arrow, then click 9600 bps.
Click OK to confirm your changes, then click Close to return to
the Sign On screen.
7
[ 24 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect to devices using Palm® OS (operating system)
8 Connect to devices using Palm® OS (operating system)
Note: The following instructions are based on Palm OS (operating system) software 3.3. For more information, please visit:
It is possible to make an infrared connection between your phone and your Palm OS device and use it as a wireless modem to
perform HotSyncTM operations with your PC.
In addition, third-party software is also available that allows you to browse the Web, send and receive faxes, and send or receive
e-mail directly to your Palm. Check your owners manual or the 3com web site for more information on third-party software.
Note: To access the Internet, you must have an existing dial-up account with a full-service Internet provider or dial-up access to
a corporate network. Connection to on-line services such as CompuServe or Prodigy are not available at this time.
Note: America Online provides a software program that allows you to check your AOL E-mail from your handheld device. For more
information, type AOL keyword: PDA.
• CONNECTIONS PREFERENCES
Before you can make data calls using your Palm OS device and your Nokia phone, you need to
create a new connection device in the Connections preferences folder.
1
2
3
4
Tap the Applications icon, then tap Prefs
Tap the Categories drop-down menu, then tap Connection.
Tap New. Enter the name of the new connection device (example: Nokia).
Click the Connection Method drop-down arrow, then click IrCOMM to Modem.
8
5
Click Details. Set speed to 9,600 bps and flow control to Automatic. Click OK when finished,
then click OK to close the Edit window.
6
Your new Nokia phone configuration should now appear in the list of Connection options, and
is available to all applications that support a modem connection.
• TCP/IP DIAL-UP AND OTHER CONNECTIONS
Once you have a configuration for your Nokia phone, you can use that configuration with any
existing TCP/IP or network preferences, as well as any stand-alone 3rd party E-mail, Web browser,
or fax programs. Please consult your device’s user guide or the software’s documentation for more information on setup and
configuration of Palm OS’s TCP/IP or fax software.
Before you make a data call
Before initiating the data call from your Palm OS device, don’t forget to enable Infrared communications on your phone, then align
the infrared ports of the two devices.
[ 25 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect to devices using Microsoft PocketPCTM OS (operating system)
9 Connect to devices using Microsoft PocketPCTM OS
(operating system)
You can use your Nokia phone as a wireless modem with Pocket PC devices, then use these devices to check e-mail or browse the
Web.
You may also be able to send and receive faxes from your Pocket PC device. However, this may require additional software from
another manufacturer. Check your device’s user guide, Web site, or theMicrosoftPocket PCWeb site for moreinformation on available
software:
Note: To access the Internet, you must have an existing dial-up account with a full-service Internet provider or dial-up access to
a corporate network. Connection to online services such as CompuServe and Prodigy is not available at this time.
Note: America Online offers a software program that allows you to check your AOL E-mail from your handheld device. For more
information, type keyword: PDA.
• CONFIGURE A MODEM CONNECTION
The procedure for creating a new modem connection for use with your Nokia phone is similar to that found in the various Windows
desktop operating systems.
Important: You may need to first disable your Pocket PC’s option that automatically begins synchronization when a serial cable
or infrared connection is detected. For more information on this task, please consult your device’s user guide.
CREATING A MODEM CONNECTION
To create a new modem connection to your Internet service provider or corporate network:
1
2
3
Tap the Start icon
, then tap Settings.
9
Tap the Connections tab, then tap Modem.
Tap New Connection, then enter a name for the connection (example: Internet-Nokia phone).
4
5
Click the modem selection drop-down arrow, then select the IrCOMM or Generic IrDA option.
Tap Advanced to access additional configuration properties for Port Settings, TCP/IP, and Name Servers (if required by your
corporate network or ISP).
6
Tap OK to close the Advanced properties window, then tap Next.
[ 26 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect to devices using Microsoft PocketPCTM OS (operating system)
7
8
Enter the area code (if necessary) and phone number, then click Next.
Tap Wait for dialtone to deselect this option, then tap Finish.
Your new dialing configuration is now visible in the Modem Connections list.
Note: You may need to click the Dialing tab and modify the way Pocket PC dials local, long distance, and international numbers.
For more information on dialing patterns, consult your handheld device’s documentation.
9
Use your new modem connection
To connect to your Internet service provider or corporate network:
1
2
Tap the Start icon
, then tap Programs.
Tap Connections, then tap your new modem connection (example: Internet-Nokia phone).
3
Enter your user name, password, and domain (if necessary).
[ 27 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect to devices using Microsoft PocketPCTM OS (operating system)
4
5
Click Connect. When you have successfully logged on to the network, the Pocket PC’s status screen will show the message
Device Connected.
Launch your browser or e-mail application.
Note: For information on how to configure the Pocket PC Web browser or e-mail software, please consult your device’s
documentation.
Before you make a digital data call
Before initiating the data call from your Pocket PC device, make sure you enable infrared communications on your phone, then
align the infrared ports of the two devices.
9
[ 28 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
10 Index
basics 11
A
delete notes/rests 11
save 11
Edit ringing tone
change duration 11
change note duration 11
change pitch 11
Abbreviations 4
About MIDI files 12
AOL modem setup 23
Applications
compatible 3
C
H
Change note duration 11
Change ringing tone pitch 11
Changing connection type 8
Changing PIM applications 16
Communications
Hardware setup
PC Composer 10
I
distance between devices 4
Ignore contact deletions 15
Infrared 4
enable IR 4
infrared 4
interruptions to IR 4
Installation
change language of installation 6
Compatible applications 3
Compose a ringing tone 11
Configure data software 22
Configure PC Sync 14
Connect to a network/Internet 22
Connect to Palm devices 25
Connection Manager 8
Connection preferences (Palm) 25
Connection to PocketPC devices 26
Contacts
language selection 6
note to Windows ME users 5
PC Suite 5
temporary files 5
uninstall PC Suite 6
Introduction 3
IR 4
IR and Windows 95 20
M
custom contact lists 16
Modem driver 19
Modem installation 20
Windows 2000 20
Modem setup 19
AOL 23
deleting-settings 15
Content Copier 7
basics 7
compatible phones 7
log 9
saving data 8
10
configure data software 22
Dial-up Networking 22
Palm 25
source phone 8
target phone 8
unsupported phones 9
Copy data
from source phone 8
to target phone 9
Copy data to target phone 9
Create a new connection 22
Custom contact list 16
PocketPC 26
N
New contact list
Lotus Organizer 17
Other 17
Outlook 16
New modem connection 22
New Synchronization 16
Nokia Modem Setup (Windows 2000) 20
Note capacity 11
D
Data applicatons 23
Data call
ringing tone 11
Notes on data calls 23
NT Workstation 4.0 and Infrared 21
configure data software 20
establish IR connection 19
modem installation 20
Data call notes 23
O
Data calls
Open Standard MIDI file 12
Other data applications 23
getting started 19
Delete notes and rests 11
Deleting contacts-settings 15
Dial-up connections (Palm) 25
Dial-up Networking 22
Digital data
P
Palm(tm) connectivity 25
PC 4
PC Composer 10
launching 10
overview of window 10
PC Suite
before you begin 19
Digital data call reminders 23
Digital data call requirements 3
Download modem driver 19
Content Copier 7
featured components 5
installation 5
E
Edit a ringing tone
[ 29 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
PC Composer 10
PC Sync 14
PC Sync 14
automatic startup 16
basics 15
changing PIM applications 16
exit application 15
New Synchronization 16
options 16
starting application 15
supported PIMs 14
synchronize for the first time 15
task bar icon 15
PC Sync configuration
calendar and conacts 14
general 14
PIM properties 15
resolving conflicts 14
PIM 4
PocketPC setup 26
R
Requirements
digital data calls 3
system 3
Resolving synchronization conflicts 14
Ringing tone
edit 11
PC Composer 10
playback 11
ringing tone 11
Ringing tones
from MIDI files 12
S
10
Safety notes 4
Save new ringing tone 11
Saving phone data 8
Send ringing tone options 12
Sending ringing tone to phone 12
Sound card setup 10
Source phone 8
Standard MIDI File
edit 13
Standard MIDI file
open 12
save 13
Standard MIDI files (about) 12
subset of phone book 16
Synchronization conflicts 14
System requirements 3
T
Target phone 8
Types of data applications 23
U
Using PocketPC modem connection 27
W
Windows 2000 Infrared 20
Windows 95 IR support 20
Windows ME installation note 5
Wireless modem setup 19
[ 30 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
|