Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Traffic Safety...........................................................1
Operating Environment...........................................1
Emergency Calls ....................................................2
2. The Display and Connectors...........................5
Installing a battery...................................................7
Removing a battery ................................................7
Switching On or Off ..............................................11
Access Codes......................................................11
Answering a Call...................................................13
Making a Call........................................................13
Speed Dialing.......................................................13
Last Number Redial..............................................14
1-Touch Dialing.....................................................14
Emergency Key 9.................................................15
Earpiece Volume...................................................15
Calling Line Identification ......................................16
Distinct Ringing ....................................................16
Keyguard .............................................................16
Voice Messages ...................................................18
Alpha Mode .........................................................21
Entering Names....................................................22
Storing Numbers and Names ...............................22
Recalling Stored Numbers....................................24
Recalling Stored Names .......................................24
i
Download from Www.Somanuals.com. All Manuals Search And Download.
To view Dialed Numbers .......................................25
To view Last Received Calls..................................25
To view Missed Calls.............................................25
Notepad...............................................................26
Call Timers ...........................................................26
Sending Strings of Touch Tones............................27
Touch Tone Settings in the Phone ........................29
Summary Of Menu Functions ...............................31
Menu 01, Memory Functions................................32
Menu 2, Messages...............................................32
Menu 3, Call Settings ...........................................33
Menu 4, Phone Settings ......................................35
Menu 5, Security Options ....................................37
Menu 6, Network Services ...................................39
Menu 7, System Select ........................................43
Menu 8, NAM Selection........................................44
Menu 9, Number Editor .......................................45
Menu 10, Alert Options.........................................45
Menu 11, Activate Keyguard ................................46
11. Data and Fax Calls ......................................47
Approximate battery operation times ....................50
Approximate charging times ................................50
Standard Travel Charger (ACH-3U) .......................51
Rapid Travel Charger (ACH-4U) ...........................51
Rapid Cigarette Lighter Charger (LCH-2) ..............51
Compact Desktop Charging Stand (CHH-2) .........52
Compact Desktop Charger Kit (CHH-2K)..............53
Handsfree Desktop Charger (CHH-8)....................53
Handsfree Desktop Charger Kit (CHH-8K) ............53
Mobile Holder (MBH-6).........................................53
Compact Handsfree Car Kit (CARK-10) ................54
Complete Car Installation Kit (CARK-11) ...............54
Booster Kit (BSHK-4)............................................55
External Audio Handset (HSU-1)...........................55
Belt Clip (BCH-2) ..................................................56
13. Care and Maintenance ...............................57
ii
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Important Safety Information
Traffic Safety
Do not use a hand-held telephone while driving a
vehicle. If using a hand-held telephone park the vehicle
before conversing.
Always secure the phone in its holder; do not place the
phone on the passenger seat or where it can break
loose in a collision or sudden stop.
The use of an alert device to operate a vehicle’s lights
or horn on public roads is not permitted.
Remember road safety always comes first!
Operating Environment
Remember to follow any special regulations in force in
any area and always switch off your phone whenever it
is forbidden to use it, or when it may cause interference
or danger.
Operation of any radio transmitting equipment,
including cellular telephones, may interfere with the
functionality of inadequately protected medical devices.
Consult a physician or the manufacturer of the medical
device if you have any questions. Other electronic
equipment may also be subject to interference.
As with other mobile radio transmitting equipment,
users are advised that for the satisfactory operation of
the equipment and for the safety of personnel, it is
recommended that the equipment should only be used
in the normal operating position.
Users are advised to switch off the phone when at a
refueling point (service station). Users are reminded of
the need to observe restrictions on the use of radio
equipment in fuel depots (fuel storage and distribution
areas), chemical plants or where blasting operations are
in progress.
Do not store or carry flammable liquids, gases or
explosive materials in the same compartments as the
phone, its parts or accessories.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Only qualified personnel should install or service the
phone in a vehicle. Faulty installation or service may be
dangerous and may invalidate the warranty.
Electronic fuel injection systems, electronic anti-skid
braking systems, electronic cruise control systems and
other electronic systems can malfunction due to the
lack of protection from radio signals.
Check regularly that all cellular phone equipment in a
vehicle is mounted and operating properly.
Switch off your cellular phone when in an aircraft. The
use of cellular telephones in an aircraft may be
dangerous to the operation of the aircraft, disrupt the
cellular network, and is illegal.
Failure to observe these instructions may lead to
suspension or denial of cellular telephone services to
the offender, or legal action or both.
Emergency Calls
IMPORTANT!
This phone, like any cellular telephone, operates using
radio signals, cellular and landline networks, and
user-programmed functions which cannot guarantee
connection in all conditions. Therefore you should never
rely solely upon any cellular phone for essential
communications (e.g. medical emergencies).
Remember, to make or receive any calls this phone
must be switched on and in a service area with
adequate cellular signal strength. Emergency calls may
not be possible on all cellular networks or when certain
network services and/or phone features are in use.
Check with local service providers.
When making an emergency call, remember to give all
the necessary information as accurately as possible.
Remember that your cellular phone may be the only
means of communication at the scene of an accident -
do not cut off the call until given permission to do so.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
If certain features are in use (Keyguard, Locking, Call
Restricting, etc.), you may first need to turn those
features off before you can make an emergency call.
Consult this document and your local cellular service
provider.
Emergency calling
→If the phone is not
on, switch it on
→press and hold
to clear display
C
→key in emergency
number for your
present location (e.g.
911 or other official
emergency number)
→press
U
Note: Emergency numbers vary by location.
Using this Owner’s Manual
The cellular phone described in this manual is approved
for use in AMPS/TDMA networks. A number of features
included in this guide are called Network Services. They
are special services provided by cellular service
providers.
Before you can take advantage of any of these Network
Services, you must subscribe to them through your
home service provider. You can then activate these
functions as described in this guide. The manual
activation commands for various services are not
presented in this guide (e.g. ∗ and # characters for
activating or deactivating services). The phone
nevertheless is capable of handling commands given in
that form. For these commands please consult with
your service provider.
WARNING!
Use only batteries, antennas, chargers, and
accessories approved by the phone manufacturer. The
use of any other types will invalidate any approval or
warranty applying to the telephone, and may be
dangerous.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
FCC/INDUSTRY CANADA NOTICE
Your phone may cause TV or radio interference (e.g.
when using telephone in close proximity of receiving
equipment). The FCC/Industry Canada can require you
to stop using your telephone if such interference cannot
be eliminated. If you need assistance, contact your
local dealer.
This device complies with parts 15 and 68 of the
FCC rules. Operation is subject to the condition
that this device does not cause harmful
interference.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
2. The Display and Connectors
The Disp lay
A or B: Network the phone uses
A - A system only
B - B system only
AB - Both systems
No indicator: Home area only
A call is in progress (In Use indicator).
D
The phone is using a digital channel.
The phone is in a network other than your home
network (roaming).
Shown continuously: roaming in a home-type system.
Flashing: roaming in a non-home-type system.
ABC
The phone is in alpha mode.
A voice message is waiting.
Steady: You have received a text message.
Flashing: Text message memory is full.
Shows a memory location, menu, submenu or option
number.
and bar
Indicates the current signal strength at your location.
The higher the bar, the better the signal.
and bar
Indicates how much charge is left in the battery. The
higher the bar, the more charge in the battery.
Indicates that there is a list of options to select from.
Also indicates the currently selected option.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Connectors
➊
➋
➌ ➍
For Fast Cigarette Lighter Charger, Fast Travel
Charger, and Standard Travel Charger
Ê
Ë
Ì
Í
Power connector for Desktop Charger
CHH-2/CHH-2L
System and data connector for accessories,
desktop chargers, and HF car kit
For external antenna
6
Download from Www.Somanuals.com. All Manuals Search And Download.
3. The Battery
Your phone is powered by a rechargeable battery. Use
only batteries approved by the phone manufacturer and
recharge your battery only with the chargers approved
by the manufacturer.
A new battery’s full
performance is achieved only
after two or three complete
charge and discharge cycles!
Note: This chapter gives only the basics for battery
usage. See “Accessories” for more information on
chargers and other accessories.
NICKEL CADMIUM AND NICKEL
METAL HYDRIDE BATTERIES MUST
BE RECYCLED OR DISPOSED OF
PROPERLY. MUST NOT BE DISPOSED
OF IN MUNICIPAL WASTE.
NiCd
NiMH
Installing a battery
2.
Insert the battery onto
the back of the
phone.
Ê
1.
Fasten it to the phone
by sliding slightly up-
ward until the locking
catch clicks.
Ë
Removing a battery
1.
Switch off the phone.
2.
Press and hold the
locking catch.
Ê
3.
Slide the battery down.
Ë
Ì
Lift the battery away from the phone.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Charging a battery with
Fast Travel Charger
(ACH-4U)
Connect the lead
from the charger to
the bottom of the
phone.
Ê
Connect the charger
Ë
to a standard 120V AC outlet.
When the battery is charging, the battery
indicator on the right side of the display
scrolls. Allow the battery to completely
charge. Charging is finished when the
segments stop scrolling.
The charging times depend on the type of the
battery and the charger used.
See the “Accessories” chapter for details.
When charging is finished, disconnect the charger from
the AC outlet and from the phone. When you
disconnect the power cord of any accessory, grasp and
pull the plug, not the cord.
Discharging the battery
Either leave your phone switched on until it turns itself
off or use the battery discharge facility of any approved
accessory available for your phone. The battery can be
charged and discharged hundreds of times but it will
eventually wear out. When the operating time is
noticeably shorter than normal, it is time to buy a new
battery.
Battery Charge
The phone gives you a warning tone and the message
BATTERY LOW when only a couple of minutes of talk time
remain. When no more battery power remains, you get
a Recharge Battery Tone and the message RECHARGE
BATTERY. The phone switches itself off.
Connect your phone directly to a charger or place it on
a charging stand with the power on or off to begin
charging.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: In some vehicles, the ignition must be on in order
to charge the phone with the cigarette lighter adapter.
If the message NOT CHARGING is displayed, charging is
suspended. Check that the battery is not overheated
(over 104°F/40°C), too cold, or connected to a
non-approved charging device. Wait for a while,
connect the charger to the phone again and retry. If
charging still fails, contact qualified service personnel.
Important Battery Information
For good operation times, discharge the battery from
time to time by leaving your phone switched on until it
turns itself off or by using the battery discharge facility
of any approved accessory available for your phone. Do
not attempt to discharge the battery by any other
means.
When a charger is not in use, disconnect it from the
power source. Do not leave the battery connected to a
charger for longer than a week; overcharging may
shorten its life.
If left unused, a fully charged battery will discharge itself
in about a week at room temperature.
When the battery is not in use, store it uncharged in a
cool, dark and dry place.
Temperature extremes affect the ability of your battery
to charge: it may require cooling or warming first.
Do not short circuit the battery. Accidental short
circuiting can occur when a metallic object (e.g. coin,
clip, or pen) causes direct connection of the + and -
terminals of the battery (metal strips on the back of the
battery), for example when you carry a spare battery in
your pocket or purse. Short circuiting the terminal may
damage the battery or the connecting object.
Use the battery only for its intended purpose.
Never use any charger or battery that is damaged or
worn out.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Leaving the battery in hot or cold places, such as in a
closed car in summer or winter conditions, reduces the
capacity and lifetime of the battery. Always try to keep
the battery between 59°F and 77°F (15°C and 25°C). A
phone with a hot or cold battery may temporarily not
work, even if the battery is fully charged. NiMH battery
performance is particularly limited in temperatures
below 14°F (-10°C).
The battery is a sealed unit with no serviceable parts.
Do not attempt to open the case.
Do not dispose of a battery in a fire! Dispose of used
batteries in accordance with local regulations. Recycle!
10
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Basics
Switching On or Off
Press and hold
a second.
P
for
When switching on, if your phone has an extendible
antenna, extend the antenna fully. As with any other
radio transmitting device, avoid unnecessary contact
with the antenna when the phone is switched on.
Push in the antenna when you are not using the phone.
The phone carries out a short self-test and briefly
displays the phone number in use.
A Personal Reminder Note appears if you have
programmed one with Menu 4 5. Press left F (Keep) to
save it or right F (Erase) to delete it.
The phone can make and receive calls only when it is
switched on and is located in the cellular network’s
service area.
The phone automatically switches itself off if the
operating temperature exceeds 158°F (70°C).
Signal Strength
The stronger the radio signal, the better
the call quality. The higher the column on
the left side of the phone display, the
better the signal at your location.
If the signal strength is not good, try
moving the phone slightly. In a building,
reception may be better near a window.
Access Codes
Your phone uses several access codes that can protect
against unauthorized use of the phone.
When requested to do so, key in the code (appears as
asterisks) and press left F (OK). If you make a keying
mistake, press
time.
C
repeatedly to erase digits one at a
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: Avoid using access codes similar to emergency
numbers such as 911 to prevent accidental dialing of
the emergency number.
Security Code (5 digits)
Enter the 5-digit code
then left (OK) at
Security Code: prompt.
F
The Security Code comes with your phone and is
required with some phone features. Keep it secret and
in a safe place, separate from the phone.
You cannot change the Security Code. If you need a
new one, contact your dealer. The default is 12345.
If you enter an incorrect security code (CODE ERROR) five
times in a row, the phone won’t accept any entries for
the next five minutes.
Lock Code
You need the 4-digit lock code to turn on the Automatic
Phone Lock in Menu 5 1, or to change the Lock Code
in Menu 5 2. The default Lock Code is 1234.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Making and Receiving Calls
Answering a Call
→Press any key
(except
or volume keys) then
speak
P
,
E
,
A
If Keyguard is on, only
U
answers calls. Pressing
E
call.
stops the ringing sound, but doesn’t answer the
Making a Call
Extend antenna fully
Key in phone
number
U
Your phone can make and receive calls only when it is
switched on and in the cellular network’s service area.
NO SERVICE means that you are probably outside the
cellular service area. No calls can be placed or
received. If you try to make a call while NO SERVICE is
displayed, the phone displays WAIT FOR SERVICE, and
tries to make the call for the next 2 minutes.
Note: Check with your cellular system operator for
information about when you need to dial a ‘1’ and/or an
area code in addition to the number.
If you make a mistake
dialing
Press
C
once to
delete the last digit, or
Press and hold
clear display
C
to
Hanging up
Press
E
Speed Dialing
Key in memory
location number
(2 to 99)
U
The phone recalls the phone number from the memory,
displays it briefly, then dials it.
Note: If you press 1
stored with Menu 2 3, Set Voice Mailbox Number. If
U, the phone dials the number
13
Download from Www.Somanuals.com. All Manuals Search And Download.
you press 9
only if Menu 3 4, Emergency Key 9, is set On!
U, the phone initiates an emergency call
Last Number Redial
Clear display with
C
U
Redialing any of the last
10 numbers
U
then ▼ or ▲
within a second
Once you see the
number you want,
press
U
to dial it.
Note: After
U, you must press ▼ or ▲ within a
second to scroll through the last 10 dialed numbers.
Otherwise, the phone automatically dials the most
recently dialed number.
1-Touch Dialing
Press and hold the key
(2 to 8) for a few
seconds until the call
is started.
The phone recalls the phone number from memory,
displays it briefly, then dials it. To use this feature, Menu
3 3, One Touch Dialing, must be On and you must have
stored numbers in the location corresponding to the
number you pressed. See the “Personal Directory”
chapter for details on storing numbers.
Note: If you press 1
stored with Menu 2 3, Set Voice Mailbox Number. If
you press 9 , the phone initiates an emergency call
U, the phone dials the number
U
only if Menu 3 4, Emergency Key 9, is set On!
Important!
Official emergency numbers vary by location (e.g. 911
or other official emergency number). Only one
emergency number is programmed into your phone to
be dialed automatically by one key emergency dialing,
which may not be the proper number in all
circumstances. One key emergency dialing does not
operate when Keyguard is in use or when the phone is
connected to a modem.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Emergency Key 9
→Press 9 then
OR:
U
→Press and hold 9 for
more than 3 seconds
The phone dials the preprogrammed emergency
number (e.g. 911) with either of these dialing methods.
You can also dial an emergency number as usual by
keying in the whole emergency number then
U.
Note: Pressing and holding Emergency Key 9 to dial an
emergency call does not function when Keyguard is in
use or when the phone is connected to a modem. (See
“Keyguard” later in this chapter for more information on
Keyguard.)
Note: Emergency Key 9 works only if it has been set
On in Menu 3 4!
Voice Mail Key 1
Press and hold
a few seconds.
1
for
The phone dials the number stored with Menu 2 3, Set
Voice Mailbox Number.
Earpiece Volume
Two volume buttons on the side of the phone adjust the
earpiece volume. The upper volume button increases
and the lower volume button decreases the volume.
If an accessory with its own loudspeaker is connected
to the phone, the volume keys select the volume for
that accessory.
Muting/Unmuting the
phone’s microphone
Press and hold left
F (Menu) for few
seconds
▼ to Mute or Unmute
left F (OK)
Muting and unmuting may be done only during an
active call.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Calling Line Identification
If you have subscribed to and activated this network
service, the phone displays the caller’s phone number if
the system is able to identify it. The phone displays the
caller’s name if you have stored that caller’s name and
number, and the person calls you from the number you
have stored.
CALL or NO ID CALL displays when the number is not
available. PRIVATE ID CALL displays when the caller has
prevented the number from being shown.
Note: For information about availability of and
subscription to Calling Line Identification Presentation,
contact your system operator.
Distinct Ringing
You may set your phone to ring distinctly when
particular people call. To do this, store the person’s
name and number in your phone and include the
character “!” somewhere in the person’s name. Your
phone rings distinctly when there is an incoming call
from that person’s number. For details on storing
names and numbers, see “The Personal Directory”
chapter.
Note: Distinct Ringing works only when Calling Line
Identification is active.
Keyguard
Press left F (Menu)
then ∗.
Keyguard prevents accidental key presses (e.g. when
the phone is in your pocket). Press left F (Menu) then
∗ to activate or deactivate keyguard. You can also
activate Keyguard by using left
F
(Menu) 11.
Keyguard cannot be activated when the phone is
connected to a car kit or in a handsfree desktop
charger.
Note: When Keyguard is ON, calls may be possible to
the emergency number 911 (911
U
). Pressing 9
U
should also work, if Menu 3 4, Emergency Key 9, is set
ON. However, pressing and holding Emergency Key 9
does not function.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
When placing an emergency call, the emergency
number will be displayed only after you have keyed in all
its digits. After the emergency call, Keyguard becomes
active again.
Answering a call with
Keyguard active
Press U.
During the call the keypad remains unlocked which lets
you operate the phone as usual. After you end the call,
Keyguard becomes active again.
CallWaiting
With Call Waiting, the active call is put on hold as you
answer the waiting (incoming) call. This service is
available only if you have subscribed to it through your
network operator. For details on Call Waiting availability
and operation, check with your network operator.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Voice and Text Messages
Please check with your operator for the availability of
message features.
Voice Messages
When you receive a voice message, the phone beeps,
lights the voice message indicator (
), and displays
NEW VOICE MESSAGE. The phone shows the number of
messages if there are more than one.
To use the methods described below to call your voice
mailbox, you must store your voice mailbox number in
your phone, which is described in this section.
To call your voice
mailbox after receiving a
message
With NEW VOICE
MESSAGE on display,
left F
U
(Listen) OR
Note that your voice mailbox number must be stored in
the phone to use this method (see below).
To call your voice
mailbox any time
Press and hold 1
To store your voice
mailbox number in the
phone
Left
key in voice mailbox
number
left
F
(Menu) 2 3
F
(OK)
Once you enter the number, it is used until you change
it again.
Note: The voice mailbox may be provided by the
network (and the network operator gives you the
number to call) or you may make use of your own
answering machine.
Text Messages
When the text message network service is available
and you have subscribed to it, your phone can receive
and store text messages. The text message function is
a network service and may not be supported by your
network.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Also, to use text messaging, you must have the phone
number of your message service center available. The
phone can store up to 30 text messages, with a
maximum of about 1,900 characters for all messages
combined. Contact your network operator for details
about the text messaging service and the maximum
number of characters allowed in a message.
The network may have its own default message that is
displayed when the phone is in the network coverage
area. This does not prevent the use of your phone in
any way.
Reading Text Messages
When you receive a text message and there is enough
space left in the message memory, (nn) NEW TEXT
MESSAGE(s) (or NEW URGENT or NEW EMERGENCY MESSAGE if
applicable) and the indicator (
) are displayed. See
“The Display” for a description of the Text Message
indicator.
To read messages
immediately
With NEW TEXT
MESSAGE(s) on display,
press left
F
(Read)
To read text messages any Press right
F
(Quit) ,
time then later:
left
F
(Menu) 2 2
press ▼ to view the
first message
scroll message(s)
with ▼ or ▲
The messages are shown in the order that they were
received or stored. New messages are shown first, in
their order of priority, then old messages, in their
chronological order.
NEW indicates an unread message and is followed by
the date and time of receipt.
OLD indicates that the message has already been read.
URGENT indicates that the message received was
marked “urgent” by the sender.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
EMERGENCY indicates that the message received was
marked “emergency” by the sender.
LOCKED indicates that you have locked the message. It
will not be overwritten even if there is no more space in
memory and there is an attempt to deliver a new
message to your phone.
The Option soft key
With message on
screen,
press left
(Option)
▼ to option you
want
left
F
F
(OK)
Read next shows the next message.
Erase deletes the current message from memory.
Lock/Unlock allows you to lock and unlock messages.
When a new message arrives and the message
memory is full, the new message automatically
overrides old messages unless they are locked.
Call back displays the first number from the current
message and calls that number. You can also just press
U
while the message is displayed to call back a
number in the message.
Setting your phone to
“Pager Mode”
Left
▼ to On
left
OR
left
F
(Menu) 3 8
(OK)
F
F
(Menu) #
With “Pager Mode” set to On, you can receive Voice
Mail Notification and Text Messages. You do not receive
any incoming calls. When you set “Pager Mode” to On,
the message PAGER ONLY is displayed. The default
setting is Off. “Pager Mode” is a network service.
Please check for the availability from your network
operator.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
7. The Personal Directory
You can store up to 100 numbers and associated
names in your “Personal Directory”.
Stored numbers may be up to 16 digits long. Stored
names may be up to 16 characters long. The phone
provides you with 8 extended number locations (any
you choose) that allow the stored number to contain up
to 30 digits in addition to the name.
The identical name may be used only once in memory.
REPLACE NAME? appears when you try to store a name
already in memory.
Alpha Mode
To enter names, retrieve numbers based on names,
and view names, press
A. The phone displays ABC to
indicate that you can use keys to enter letters as well as
numbers, and that you are viewing names rather than
numbers.
When a number is displayed, press
associated name (if there is one). When a name is
displayed, press to see the associated number.
A
to see the
A
When ABC is displayed, you can enter these characters:
Key Characters Key Characters
1
2
3
4
5
6
1
ABC2
DEF3
GHI4
JKL5
MNO6
7
8
9
0
∗
#
PQRS7
TUV8
WXYZ9
-?!,.:"’&$( )0
Enter letters from same key again
Blank space
Note: If you include the character ! in the stored name,
the phone rings distinctly when receiving calls from that
number. See the “Making and Receiving Calls” chapter
for more information.
When entering letters, press and hold the key to switch
between upper case and lower case letters. Press
to correct a mistake.
C
21
Download from Www.Somanuals.com. All Manuals Search And Download.
When ABC is not displayed, you can use the ∗ key to
enter these special characters:
∗∗ +, links memory locations
∗∗∗ p, creates a pause
∗∗∗∗ w, causes the phone to wait for input
Entering Names
A
Press and release the
key labeled with the
letter you want until
that letter appears
for another letter on
the same key, press ∗
in between letters or
wait a few seconds
Example Name: Lisa
Press this
A
5 5 5
For this effect
alpha mode
L
press and hold 4, then 4 4
I (lower case)
7 7 7 7
2
s
a
Storing Numbers and
Names
Key in phone
number
right
left
key in name
(optional)
F
(Memory)
(Store)
F
left
left
F
F
(Store)
(OK)
You can also enter another location number or scroll
through available location numbers with ▼ or ▲ after
the STORE IN LOCATION? prompt. You may group stored
numbers, such as storing your family’s numbers in
locations 20-29. At STORE IN LOCATION? you would key in
2* and the phone would store the number in the first
available location beginning with a 2 (such as 21).
To fast save
Key in phone
number
press and hold right
F (Memory)
22
Download from Www.Somanuals.com. All Manuals Search And Download.
To add a name to a stored
phone number
Recall stored phone
number
then key in name
right F (Memory)
then left F (Store)
At STORE IN
A
LOCATION? enter
recalled location
number
left
F
(OK) then
left F (OK) again at
REPLACE?
To change the number
stored with a name
Recall stored number
C
repeatedly to
erase number
key in new number
right F (Memory)
left F (Store) then
left F (OK) again at
REPLACE?
To erase stored names and With display empty,
numbers
right F (Memory)
left F (Store) then
left F (Store) again
▼ to name you
want to erase, or key
in name, or press
to see numbers, then ▼
left (Erase)
A
F
Press right
change your mind. Press right
the erase function. You may also use Menu 01 5 to
erase.
F
(Quit) instead of left F (Erase) if you
F
(Quit) again to exit
Note: You cannot undo Erase functions so be careful!
To erase all stored numbers Left F (Menu) 01 5
▼ to Erase All then
left
F
(OK)
left F (OK) at ARE
YOU SURE?
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Recalling Stored
Numbers
With display empty,
press ▼ or ▲.
Press ▼ or ▲ repeatedly to scroll through stored
numbers. Press
A
to see corresponding names.
Recalling Stored
Names
With display empty,
press
A
then ▼ or ▲.
Press ▼ or ▲ repeatedly to scroll through stored
names. Press to dial the displayed name’s number.
U
To recall numbers by
memory location
Key in location
number
right F (Memory)
right F (Find)
Press
name’s number.
U
to dial the displayed number or displayed
To recall numbers by
name
Right F (Memory)
key in name or its
first few letters
right F (Find)
If you enter only the first letters of the name and there is
more than one name beginning with these letters, press
▼ or ▲ until you see the name you want.
To begin scrolling at a
particular location
Key in first digit of the
location then ∗ then ▼.
This works for 2-digit locations. If you press 2∗ then ▼,
the phone begins scrolling at location 20, if you have
numbers stored in that location. This is handy if you
have grouped together stored numbers. (See “Storing
Numbers and Names” earlier in this section.)
Status of the Directory
Left F (Menu) 01 6
▼ shows empty
▼ again shows full
▼ again shows
hidden
This lets you see how many empty, full, and hidden
locations are in your directory.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Temporary Lists and Call Timers
The phone automatically stores the last 10 dialed
numbers, numbers of the last 10 answered calls, and
numbers of the last 10 missed calls. It also gives you
10 temporary storage spaces, in a “Notepad”.
Note: The phone displays the phone numbers of
received and missed calls only if the cellular system is
able to identify the caller.
To view Dialed
Numbers
With display empty,
press
▼ or ▲ within a
second
U
The top right corner of the display shows the location
number of the last dialed number (L0 - L9). Press
view associated names, if available. You may also use
A
to
Menu 01 1, Dialed Calls. Once you see the number you
want, press
U
to dial.
To view Last Received
Calls
With display empty,
press ∗ then ▼ to
scroll the numbers.
The top right corner of the display shows the location
number of the 10 most recent calls you have answered
(R0-R9). Press
available. You may also use Menu 01 2, Received Calls.
A
to view associated names, if
To view Missed Calls
With display empty,
press ∗∗ (+) then ▼.
If MISSED CALLS is
displayed, press left
F
(List) then ▼ to
scroll the list, OR
Press right
F
(Quit) to view the
numbers later
The top right corner of the display shows you the
location number (U0-U9) of the calling phone numbers
of the 10 most recent calls you have not answered.
Press
A
to view associated names, if available. You
may also use Menu 01 3, Missed Calls.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Notepad
The Notepad is “temporary storage” for up to 10
numbers.
To store numbers and
names in Notepad
Store number as
normal, but at STORE
IN LOCATION, press #
left
F
(OK)
See “The Personal Directory” chapter for details on
storing numbers.
To see numbers and
names in Notepad
# then ▼ or ▲
The top right corner of the display shows the location
number of the Notepad (o0 - o9).
To clear temporary lists
and Notepad
Left
F
(Menu) 01 4
This clears Dialed Numbers, Received Calls, Missed
Calls, and the Notepad. You cannot undo this operation
so be careful!
CallTimers
Left
F
(Menu) 01 7
▼ to show duration
of the LAST CALL
▼ again to show the
duration of ALL CALLS
This shows call durations for the currently-selected
NAM. The phone has separate timers for each NAM
(phone number) your phone uses.
Note: The actual time invoiced for calls by your service
provider may vary, depending upon items such as
network features, rounding off for billing, and taxes.
To clear Call Timers
Left
▼ to CLEAR TIMERS
left (OK)
F
(Menu) 01 7
F
key in security code
at Security code: then
left
F(OK)
26
Download from Www.Somanuals.com. All Manuals Search And Download.
9. Touch Tones
Your phone is a “Touch Tone” phone, meaning that it
creates certain sounds when you press the keys.
These sounds can be used for many automated, over-
the-phone services such as checking your bank
balance, using your voice mailbox options, and even
checking airplane arrival and departure times.
Touch Tones are called “DTMF” (Dual Tone
Multifrequency) tones in the phone.
Sending Individual
TouchTones
Press keys during call.
Touch Tones can be used only when a call is active. You
would use the Individual Touch Tone feature when, for
example, you are prompted to “press 1 and then the
star (*) button”. You would simply press 1 *.
Note: Individual Touch Tones can be sent only if Menu 4
3 is not set to Off. Menu 4 3 is described in this section.
Sending Strings of
TouchTones
During a call, with the
display empty:
Recall from memory
the string you want to
send
left F
then U
(Menu)
You can transmit Touch Tones one by one by pressing
the keypad during a call. Additionally, you can store a
whole digit sequence in a memory location and send it
as Touch Tones. You could use this for frequently-used
strings of numbers, such as your bank account
number.
The phone sends (as Touch Tones) the digits that are
currently on the display. You may also press and hold
left
F
(Menu) then press ▼ to Send DTMF then left
F
(OK) then left
F
(Quit) to send a string of Touch Tones.
To store a Touch Tone
string
Store Touch Tone
strings the same way as
you store phone
numbers.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
For example, you could store your bank account
number in the personal directory.
To store Touch Tone
strings with a phone
number
Key in the phone
number
press ∗∗∗ (p) or
∗∗∗∗ (w)
key in the Touch
Tone string
store the number in
the normal way
∗∗∗ creates a “p” (pause) character. When you recall
this number sequence from memory and press
the phone dials the phone number, pauses 2.5
U,
seconds, then sends the DTMF digits. You can add as
many “p” characters as you need.
∗∗∗∗ creates a “w” (wait) character. When you recall this
number sequence from memory and press
U, the
phone dials the phone number, then waits for you to
press the left (DTMF). This is handy if you are calling
F
a number that then prompts you to enter information,
such as your bank account number.
To link a stored phone
number to DTMF digits
in another memory
location
Key in the phone
number
press ∗∗ (+)
key in memory
location storing the
DTMF string
store the number in
the normal way
Use this if the phone number and DTMF digits do not fit
in one storage location; it links the phone number to
the memory location storing the DTMF string.
∗∗ creates a “+” (link to another memory location).
When you recall this number sequence from memory
and press
U, the phone dials the phone number,
displays digits stored in the memory location you have
entered, then sends them as Touch Tones.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Entering only a “+” at the end of a stored number
causes the phone to prompt you for a memory location
after the call is connected. The phone expects a
memory location after the “+” character. Enter a
location number and press left
contents of that memory location as Touch Tones.
F
(OK) to send the
Touch Tone Settings in the Phone
Your phone’s Touch Tone settings are Menu 4 3, Manual
DTMF Tones, and Menu 4 4, Auto DTMF Length.
Menu 4 3, Manual DTMF
Tones
Left
▼ to your choice
left (OK)
F
(Menu) 4 3
F
This determines the length of the Individual Touch Tones
when you press keys during calls. Note that regardless
of this setting, strings of Touch Tones can be sent.
Continuous means the tone sounds for as long as you
hold the key. Fixed sets the tone length to 100 ms,
regardless of how long you press the key. Off turns the
tones off, meaning that no tones are sent when you
press individual keys.
Menu 4 4, Auto DTMF
Length
Left
▼ to your choice
left (OK)
F
(Menu) 4 4
F
This determines the length of Touch Tones in strings.
Short sets the DTMF tone length to 100 ms. Long sets
the DTMF tone length to 500 ms.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
10. The Menu
The phone’s menus and submenus allow you to tailor
the phone to suit your tastes.
Menu guidelines
→Left F (Menu) enters the menus
→▼ and ▲ step through menus, submenus, and
options
→A gives help text on menus and submenus and
goes to the next screen of help text if there are
several
→Right F (Quit) goes back one level
→C
exits the menu facility without making changes
Scrolling through
the menus
→Left F (Menu)
→▼ or ▲ to menu
you want
→Left F (Select or
OK) enters submenus
and chooses options
The current setting appears first in lists of setting
options.
Entering menus by
number
→Left F (Menu) then
menu number then
submenu number then
setting number.
The menus, submenus and setting options are
numbered. The number is shown in the display’s top
right corner. Once you reach the menu or submenu you
want, you can also use ▼ or ▲ to see options.
Note: Press the menu, submenu, and setting numbers
within a couple of seconds of each other when using
this method.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Summary Of Menu Functions
MEMORY FUNCTIONS Dialed Calls 01 1
Menu 01
Received Calls 01 2
Missed Calls 01 3
Clear All Call Lists 01 4
Memory Erase Options 01 5
Memory Status 01 6
Call Timers 01 7
MESSAGES
Menu 2
Listen to Voice Messages 2 1
Read Messages 2 2
Set Voice Mailbox Number 2 3
CALL SETTINGS
Menu 3
Ringing Volume 3 1
Ringing Tone 3 2
One-Touch Dialing 3 3
Emergency Key 9 3 4
Automatic Redial 3 5
Automatic Answer 3 6
Calling Card 3 7
Pager Mode 3 8
PHONE SETTINGS
Lights 4 1
Menu 4
Keypad Tones 4 2
Manual DTMF Tones 4 3
Auto DTMF Length 4 4
Personal Reminder Note 4 5
Countdown Timer 4 6
Restore Settings 4 7
Menu List 4 8
Language 4 9
SECURITY OPTIONS
Menu 5
Automatic Phone Lock 5 1
Change Lock Code 5 2
Restrict Calls 5 3
Outgoing Calls 5 3 1
International Calls 5 3 2
Incoming Calls 5 3 3
Hide Memory 5 4
31
Download from Www.Somanuals.com. All Manuals Search And Download.
NETWORK SERVICES Dual Mode Selection 6 1
Menu 6
Voice Privacy 6 2
(see note below)
Call Forwarding 6 3
Forward All Calls 6 3 1
Forward If Busy 6 3 2
Forward If Not Answered 6 3 3
Forward If Out of Reach 6 3 4
Call Waiting 6 4
Selective Call Acceptance 6 5
Allowed Numbers List 6 5 1
Blocked Numbers List 6 5 2
Send Own Number 6 6
Network Feature Setting 6 7
SYSTEM SELECTION Selects which cellular system to use.
Menu 7
NAM SELECTION
Menu 8
Selects the phone’s system and
current phone number.
NUMBER EDITOR
Allows editing of the
Menu 9
currently-displayed number.
ALERT OPTIONS
Menu 10
Selects type of ringing or silent
service.
ACTIVATE KEYGUARD Activates the keypad locking
Menu 11 mechanism.
Menu 6 Note: The items in Menu 6 shown in italics are
visible ONLY when activated with Menu 6 7!
Network Services
Some of the menu functions are network services.
These functions can be utilized only if provided by your
cellular network. To make use of a network service, you
must first subscribe to it. For availability and
subscription, contact your network operator.
Menu 01, Memory Functions
See “The Personal Directory” and “Temporary Lists and
Call Timers” chapters for descriptions of the items in
Menu 01.
Menu 2, Messages
See the “Voice and Text Messages” chapter for
descriptions of these menu items.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu 3, Call Settings
Menu 3 1, Ringing Volume
You hear each ringing level as you scroll through the
volume levels. When the phone is connected to a
handsfree desktop charger, handsfree car kit, or
headset, the ringing volume can be set separately for
those accessories with this menu.
Menu 3 2, Ringing Tone
The phone plays a sample of each pattern as you
scroll.
Note: The ringing tone is the same for all accessories.
Menu 3 3, One-Touch Dialing
With this feature on, you can dial any of the phone
numbers stored in personal directory locations 2-9 by
pressing and holding the number of the personal
directory location.
Note: Pressing 9 and
U
initiates an emergency call if
the Emergency Key 9 function is set On! Pressing and
holding 1 always initiates a call to the number stored
with Menu 2 3, Set Voice Mailbox Number.
Menu 3 4, Emergency Key 9
With this feature on, the phone makes an emergency
call when you press 9 then
preprogrammed emergency number 911.
U. The phone dials the
You can also dial an emergency call by pressing and
holding 9 for about three seconds, after which the call is
initiated. However, this method does not work when
Keyguard is active or when the phone is connected to a
modem.
Menu 3 5, Automatic Redial
When this is on, your phone redials the number you are
trying to call (if the network is busy) up to 10 times.
Press
E
to end the call attempts.
Menu 3 6, Automatic Answer
When the phone is connected to the headset or the
handsfree facility of the car kit, you can set the phone
to answer a call automatically after one ring. The car kit
must be equipped with the ignition sense option.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu 3 7, Calling Card
To store a calling card
Left
F
(Menu) 3 7
▼ to the card you
want then left
(OK)
F
key in security code
at Security code: then
left
F
(OK)
key in access
number at Access
Number:
press
card name (optional)
left (OK)
A
then key in
F
key in card number
at Card ID Code: then
left
F
(OK)
To change stored calling card information (such as your
card number), go through these steps, but use the
key to erase already stored information. Key in the new
C
information then press left
F
(OK).
Menu 3 8, Pager Mode
See the “Voice and Text Messages” chapter for a
description of this function.
Making Calling Card
Calls
Key in phone
number
press and hold
U
for a few seconds until
the phone displays
CARD CALL
press left
after Wait For Tone, Then
F
(OK)
Press OK prompt
Depending on the type of calling card, there may be an
additional prompt, Wait For Tone, Press OK Again. Press left
F
(OK) again at this prompt.
Note: This dialing method works only with cards that
require you to first dial the access number, then the
phone number, then your card number, in that order.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu 4, Phone Settings
Menu 4 1, Lights
With lights on, the keypad lights come on when you
press a key or have an incoming call, and go off 15
seconds later.
When the phone is connected to a car kit, desktop
charger, or cigarette lighter charger, the lights are on
permanently when this setting is ON; when this setting is
OFF, the lights come on when you press a key or have
an incoming call, and go off 15 seconds later.
Note: You can turn on the lights for 15 seconds by
pressing the power key quickly regardless of this
setting.
Menu 4 2, Keypad Tones
You can select the volume level or turn off the sound
the phone makes when you press a key.
Note: The keypad tone volume is set separately for
each accessory you use.
Menu 4 3, Manual DTMF Tones
Menu 4 4, Auto DTMF Length
See the “Touch Tones” chapter for descriptions of these
items.
Menu 4 5, Personal
Reminder Note
Left
F
(Menu) 4 5
key in a new
message or edit the
existing one
left
▼ to Store or Erase
left (OK)
F
(Option)
F
The Personal Reminder Note displays when the phone
is switched on. The maximum length is 30 characters.
Characters you key in are added to the left of the
cursor. Press
cursor.
C
to delete characters to the left of the
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Press ▼ or ▲ to move the cursor right or left. Store
stores the new or edited note for later use. The note is
displayed each time you switch the phone on. Erase
removes the note from the display and from the
memory.
Next time you switch the phone on, the stored note
displays. Once you have read the note, press left
(Keep) to save it or right (Erase) to delete it. It
displays each time you turn the phone on until you
erase it.
F
F
Menu 4 6, Countdown
Timer
Left
F
(Menu) 4 6
key in time to count
down at Set timer:
(appears in h and m)
left
press right
(Quit) twice to exit
F
(OK)
F
The phone sounds an alarm and displays COUNTDOWN
COMPLETED when it finishes counting down the amount
of time you enter. The timer stops if the battery runs out
or if you turn the phone off.
An incoming call overrides the timer alarm. After you
have completed the call, COUNTDOWN COMPLETED
appears, but the phone does not sound an alarm.
To stop the timer before
it alarms
Follow the steps
above, but key in 0000
at Set timer:.
To clear the alarm when
it is sounding
Press left
F
(OK) .
Menu 4 7, Restore Settings
You can reset the settings of certain menu functions to
factory defaults (as in a new telephone).
Note: The memory, timers, counters and the language
selection are not reset.
The following settings are set to the values shown:
Ringing Volume
Ringing Tone
One-Touch Dialing
Level 4 (3 in car mode)
Type 1
Off
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Emergency Key 9
Automatic Redial
Automatic Answer
Pager Mode
Off
Off
Off
Off
Lights
On
Keypad Tones
Level 2
Continuous
Long
Complete
Off
1234
Ana. & Dig.
Off
Manual DTMF Tones
Auto DTMF Length
Menu List
Automatic Phone Lock
Lock Code
Dual Mode Selection
Voice Privacy
Ringing Options
Ring
Menu 4 8, Menu List
This function lets you choose either a shortened or
complete menu. The complete menu contains all menu
items, whereas the short menu shows only the most
essential menu items, namely: Messages (Listen to Voice
Messages, Set Voice Mailbox Number), Phone Settings (Restore
Settings, Menu List), Alert Options, and Activate Keyguard.
Menu 4 9, Language
You can choose the language your phone uses for all of
its displays.
Menu 5, Security Options
Most of the phones security features require a five-digit
security code, which is normally supplied with the
phone. If you forget the security code, contact your
dealer. Since this code allows access to all the
operations of the phone, store it in a safe place,
separately from the phone.
Menu 5 1, Automatic Phone Lock
When you turn this on, the phone’s lock becomes
active after you switch the phone off and back on. With
the lock on, you must enter the lock code each time
you want to access memory and menu functions.
To enter the lockcode:
At Enter lock code: key
in the lockcode then
press left
F
(OK).
37
Download from Www.Somanuals.com. All Manuals Search And Download.
When the phone is locked, calls may be possible to the
emergency number programmed into your phone (e.g.
911 or other official emergency number) including calls
with the Emergency Key 9. Also, you may call the
number stored in location 100.
To answer a call with
Auto Lock on:
Press
U.
To call the number in
location 100 with Auto
Lock on:
▼ or ▲ then
U
Note: To unlock the phone permanently after locking it,
you need to enter this function and select the AUTO LOCK
OFF option.
Menu 5 2, Change Lock code
In a lock code, only digits 0 to 9 are accepted. Lock
codes are four digits long.
Menu 5 3, Restrict Calls
You can prevent the phone from dialing a number or
receiving a call. Note that none of the restriction options
prevents calls to the preprogrammed emergency
number 911.
Menu 5 3 1, Outgoing Calls
Allowed means that all calls can be made as usual.
Blocked means that no calls can be made. Limited means
that calls can be made only to phone numbers stored
in certain personal directory locations. You are
prompted for a FROM: and TO: value. For example, enter
FROM: 1 and TO: 15, to allow only calls to the numbers
stored in locations 1-15. Or, enter FROM : 3 and TO: 3, to
allow only calls to the number stored in location 3.
You can store an area code (for example, 214) in a
memory location (e.g., 15). Then select Limited, and
enter 15 in the FROM: and TO: values. You can then
make calls to only numbers starting with 214.
When calls are restricted, calls may be possible to the
emergency number programmed into your phone (e.g.
911 or other official emergency numbers).
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu 5 3 2, International Calls
Allowed means you can make international calls
(i.e., calls beginning with the international prefix
preprogrammed in your phone). Blocked means you
can’t make international calls with the phone.
Menu 5 3 3, Incoming Calls
Allowed means you can receive all calls. Blocked means
you can receive no calls.
Menu 5 4, Hide Memory
This function lets you hide phone numbers in your
personal directory. The names stored in the hidden
memory locations are shown on the display, but the
numbers are shown as asterisks (∗).
To hide only one location, enter the location number at
both the Hide From: and Hide To: prompts (shown below).
To hide a series of locations, such as locations 10-15,
enter the first location, for example 10, at Hide From: and
the last location, for example 15, at Hide To:.
To hide numbers:
Left
F
(Menu) 5 4
key in security code
at Security code: then
left
F
(OK)
▼ to Yes then left
F
(OK)
at Hide From: enter
first location to be
hidden then left
(OK)
F
at Hide To: enter last
location to be hidden
then left
F
(OK)
Menu 6, Network Services
Menu 6 1, Dual mode Select
You can set the phone to work in AMPS (Analog) and/or
TDMA (Digital) networks. The network can always
override your setting, however. When the phone is in
dual mode (Ana.& Dig.), the cellular network automatically
selects the right mode. The phone automatically returns
to dualmode (Ana.& Dig.) when you switch the phone off
and back on.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu 6 2, Voice Privacy
You may set this to On or Off. Voice Privacy On encrypts
the voice channel only in networks with digital service. If
you have this feature on and voice privacy becomes
inactive for any reason the phone displays VOICE PRIVACY
INACTIVE and beeps. Check for availability of this
function from your network operator.
Note: Menu items 6 3, 6 4, 6 5, and 6 6 appear on
your phone’s menu only if you are using the first
telephone number of your phone (see Menu 8, NAM
Selection), you have subscribed to the service from
your network operator, and you have activated the
menu items with Menu 6 7.
Menu 6 3, Call
Forwarding
Left
▼ to forwarding
option
left
▼ to Activate or
Cancel
left
F
(Menu) 6 3
F
(OK)
This appears on the menu
only if activated with
Menu 6 7
F
(OK)
This forwards your calls to the number that is on
display when you select Activate. Forward All Calls (Menu 6
3 1) forwards all incoming calls. Forward If Busy (Menu 6 3
2) forwards calls only when you are on the phone.
Forward If Not Answered (Menu 6 3 3) forwards calls if you
don’t answer. Forward If Out of Reach (Menu 6 3 4)
forwards calls if you are out of the serving cellular
network. Cancel All Forwarding (Menu 6 3 5) cancels all
currently-active forwarding options.
Menu 6 4, Call Waiting
Left
▼ to Activate or
Cancel
left
F
(Menu) 6 4
This appears on the menu
only if activated with
Menu 6 7
F
(OK)
If you activate call waiting, you will receive a tone during
a call to let you know you have an incoming call. The
phone may also display the incoming caller’s
identification. To answer the incoming call, press
U.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu 6 5, Selective Call
Acceptance
Left
F
(Menu) 6 5
▼ to Allowed
Numbers List or Blocked
Numbers List
▼ to Activate,
Deactivate, or Edit
This appears on the menu only
if activated with Menu 6 7
left
F
(OK)
With this, you can program the network to screen
incoming calls. The caller’s phone number is compared
to the list you select and the call is then either rejected
or allowed. Allowed Numbers List allows calls when the
incoming caller’s number matches one on the allowed
numbers list. Blocked Numbers List rejects calls when the
incoming caller’s number matches one on the blocked
numbers list.
Activate turns the restriction on. Deactivate turns the
restriction off. Edit allows you to add numbers to or
remove numbers from the list.
If you select Edit, you can then choose to Add No. to the
list, Remove No. from the list, or Remove All (clear the list).
Confirm your selection or setting with left
F
(OK).
Contact your network operator to have this feature
activated.
Menu 6 6, Send Own
Number
Left
F
(Menu) 6 6
▼ to Yes (to show
number) or No (to not
show number)
left
F
(OK)
This appears on the menu only
if activated with Menu 6 7
key in the number
you want to call at
Number: prompt
press
U
to call
This specifies whether or not to display (i.e., Send) your
phone number to the person you are calling. This
feature functions only in systems equipped with Calling
Number Identification. Contact your network operator
to see if this is available.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
If you do not make a selection, the phone uses the
default network setting, which is always active when
you switch on your phone. Check with your network
operator to find out the network default.
Menu 6 7, Network Feature Setting
Call Forwarding, Call Waiting, Selective Call
Acceptance, and Send Own Number are services
available through your network operator or dealer.
When you subscribe to any of these services, your
operator or dealer gives you a separate code that you
use to activate and deactivate each service.
Menu 6 7 lets you store all the codes you use in your
phone. Once you store the code in your phone, the
service appears as a menu item. You can then use the
menu to activate and deactivate CALL FORWARD, CALL
WAITING, SELECTIVE CALL ACCEPTANCE, and SEND OWN
NUMBER.
To remove an item from the menu, go through the
steps shown in “To Store Codes”, but simply press left
F
(OK) after the Feature code: prompt (without entering
a code).
To store codes:
Left
F
(Menu) 6 7
at Feature Code: enter
the code you want to
store in your phone
(e.g. *74) then left
F
(OK)
▼ to the service that
the code applies to,
then left
▼ to suboption (as
applicable) then left
F
(OK)
F
(OK)
▼ to Activate or
Cancel
left
F
(OK)
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu 7, System Select
In each cellular service area there are usually two
cellular operators operating public systems of type “A”
or “B”. One of the public systems (A or B) is your home
system (depending on your operator) but your phone
can work with both types of systems. With Menu 7, you
can select the type of system the phone should use.
If you have registered with several operators, use Menu
8, NAM Select, to select the current home system. The
currently-selected NAM determines which system is
currently your “home” system.
Both A&B means that when roaming, the phone first tries
to use a home-type system (such as “B” if the home
system is B). If this is not available, it then tries to use a
non-home type system (such as “A” if the home system
is B).
Hometype A or Hometype B means the phone tries to use
only a home-type system.
Non-Home A or Non-Home B means the phone tries to use
only a non-home-type system.
Home Area means the phone cannot roam at all.
Note: To use this option, your home system operator
must have a roaming agreement with the host
company whose system you try to use. Contact your
home system operator for the roaming agreements
they have with other operators.
Depending on the selection either the A or B indicator
(or both) will appear. Neither indicator appears if Home
Area is selected.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Roaming Indicators
When the phone begins roaming, it beeps, displays
ROAMING, and lights the roaming indicator ( ). For a
description of the two states of the roaming indicator,
see “The Display and Connectors” chapter. Some
cellular systems can recognize a roaming phone
automatically. In other systems, you must contact the
cellular operator before the system can recognize the
phone. You will need to give your phone number, your
phone’s ESN (electronic serial number), and how you
plan to pay for your calls. There is usually an additional
charge for roaming calls.
Note: The ESN for your cellular phone is printed under
the battery pack on the back of the phone.
Menu 8, NAM
Selection
Left
▼ to phone number
to use
left
F
(Menu) 8
F
(Select)
The cellular operator programs your phone with
software called a Number Assignment Module (NAM)
when you register for service. You can register your
phone with up to 3 cellular systems, each giving your
phone a different NAM, which contains unique data for
you such as your phone number, home service area,
and A-key.
Only one NAM is in effect at a time. When you select a
phone number, you are also selecting which system
you are using as your home system. The first phone
number displayed with this menu is the phone number
in use.
Note: You need at least one active number to make
calls. You cannot change from one NAM to another
during a call.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu 9, Number
Editor
The number you want
to edit must be on the
display
Left
C
left of cursor
F
(Menu) 9
removes the digit
▼ or ▲ moves the
cursor right or left
This function lets you edit the existing digits of a phone
number. You can press to dial the edited number.
U
Menu 10, Alert Options
With Ring & Vibra the phone rings and vibrates for
incoming calls. With Ring the phone sounds a ringing
tone. With Beep Once the phone sounds a short beep.
With Vibrate the phone only vibrates. With Silent, the
phone only flashes its lights and CALL.
The vibrator function can be activated, but it functions
only if an optional vibrating battery is used (BBT-1XV).
Contact your dealer for more information.
For different ringing volume levels and tone patterns,
see Menu 3 1 and Menu 3 2.
When the phone starts to alert, you can press
mute the ringing tone. The phone continues to alert
E
to
silently by flashing the lights and the text CALL on the
display.
When Beep once, Vibrate or Silent has been chosen, the
phone displays SILENT. Call related tones like message
received or voice mail indication beeps become shorter
with one of the above options selected.
When Silent has been chosen, Automatic Answer
(Menu 3 6) does not work.
If Vibrate is selected and no vibrating battery is attached,
the phone automatically goes into Silent mode for
incoming calls. If the phone is set to Vibrate and then
placed in a Handsfree stand, the phone rings only.
When the phone is connected to a HF desktop charger,
HF car kit, or headset, the indication mode can be set
separately for each of these accessories.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu 11, Activate
Keyguard
Press left
then 11
F
(Menu)
Keyguard remains on until you deactivate by pressing
left
F
(Menu) then ∗. When the function is activated
and there is no call in progress, no key tones are heard
and no key presses are be accepted, except for calls to
911 (or other official preprogrammed emergency
number) and
U
and
E.
When placing an emergency call, the emergency
number is displayed only after you have keyed in all its
digits. After the emergency call, Keyguard automatically
becomes active again. Keyguard cannot be activated
when the phone is connected to a car kit or in the
handsfree desktop charger.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
11. Data and Fax Calls
The phone can send or receive data when it is
connected to a compatible data terminal (such as a fax
machine or PC) through a data adapter. See the
documentation for the data adapter and terminal.
Only analog data can be sent and received.
The phone recognizes the type of the connected
terminal automatically. For instance, if a fax machine is
connected to the phone, the phone makes a fax call.
Note: Pressing and holding 9 to initiate an emergency
call does not work when the phone is connected to a
modem.
To start an outgoing data or fax call
Check that the data terminal is properly installed.
A data or fax transmission is always started from
the data terminal.
Ê
Ë
Start the transmission from the data terminal in the
normal way. For example, to send a telefax, start
the transmission from the fax machines keypad.
The phone calls the number you dialed from the
terminal’s keypad.
After the transmission, end the call from the data
Ì
terminal, or press
E.
To receive a data call
Check that the data terminal is properly installed.
Ê
Ë
Press
U
to answer the call. OR, if you know that
the incoming call is a data call, you can answer the
call from the data terminal.
After the transmission, end the call from the data
Ì
terminal. OR, press
E.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
To receive a fax call
Check that the data terminal is properly installed.
Ê
Ë
Press
U
to answer the call. OR, if you know this
is an incoming fax, you can answer the call from
the fax machine’s keypad.
After the transmission, end the call from the fax
Ì
machine’s keypad. OR, press
E.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
12. Accessories
In addition to the battery and chargers described in
this manual, an extensive accessory range is
available. You can select the accessories that meet
your specific communication needs. For availability,
please check with your local dealer.
Use only batteries, antennas, chargers, and accessories
approved by the phone manufacturer. The use of any
other types will invalidate any approval or warranty
applying to the telephone, and may be dangerous.
IMPORTANT! See “The Battery” chapter of this guide
for important battery information.
A new battery’s full
performance is achieved only
after two or three complete
charge and discharge cycles!
Approximate battery operation times
Battery
TalkTime,
StandbyTime,
Digital/Analog Digital/Analog
Slim BBH-1S
550 mAh NiMH
70 min. / 45 min.
26-30 hours
14-19 hours
BBT-1XV Vibrating 70 min. / 45 min.
550mAh NiMH
26-30 hours
14-19 hours
Ultra Extended
BBH-2H
150 min. / 90 min. 52-60 hours
28-38 hours
1100 mAh NiCd
Ultra Extended
BBH-1H
210 min./120 min. 71-83 hours
40-52 hours
1500 mAh NiMH
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: Battery operation times vary according to signal
conditions, network parameters set by the operator,
and how you use the batteries. Using the phone near
the network’s base station consumes less power.
Keeping the antenna fully extended whenever possible
maintains the connection to the network with less
power.
Approximate charging times
Battery
ACH-3U
ACH-4U
1 hour
Slim BBH-1S
4.5 hours
BBT-1XV Vibrating 4.5 hours
1 hour
Ultra Extended
BBH-2H
9 hours
2 hours
Ultra Extended
BBH-1H
14 hours
2 hours, 30 min.
Note: It is recommended that you allow your battery to
fully discharge before you recharge it. Batteries last
longer and perform better if allowed to discharge fully at
least once a week.
Standard Travel Charger
(ACH-3U)
This charger can be used with all
battery options. Note that you
cannot make calls during charging
when the battery is fully
discharged.
Plug the charger into a wall outlet
and connect the lead to the base
of the phone or to a light desk stand.
Fast Travel Charger (ACH-4U)
This lightweight AC charger can be
used with all battery options. Calls
can be made during charging, even
with a fully discharged battery.
To use the Fast Travel Charger
(ACH-4U), plug it into a standard
120V AC wall outlet, and connect
the lead from the charger to the
base of the phone.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
The charger can also be used together with the
optional Compact Desktop Charging Stand (CHH-2)
and Light Desk Stand (CHH-2L).
Fast Cigarette Lighter Charger (LCH-2)
You can charge the phone
battery from your vehicle
battery by using the Fast
Cigarette Lighter Charger
(LCH-2). You can also use the
charger with stands CHH-2
and CHH-2L (described
below). Calls are possible
during charging.
A green light indicates the
charger is ready for charging (when not charging) or
finished charging (if it has been charging). A red light
indicates charging. The battery charging times are the
same as those for the Fast Travel Charger (ACH-4U).
The input voltage range is from 10 to 30V DC, negative
grounding. Avoid prolonged charging with the Fast
Cigarette Lighter Charger (LCH-2) when the car engine
is not running; this may cause the battery of your car to
drain. Note also that in some cars the cigarette lighter
plug is not provided with electricity if the ignition is not
switched on.
Fuse Replacement
The Fast Cigarette Lighter Charger contains a
protective fuse. The fuse is located in the charger tip.
If the charger does not work, the fuse may be blown,
in which case replace it with a 3 amp. 125 volt fuse.
Never use a fuse with a higher rating.
Compact Desktop Charging Stand (CHH-2)
The Compact Desktop
Charging Stand (CHH-2)
allows you to place both the
phone and a spare battery for
charging at the same time in
the stand. It is compatible with
all battery options.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
The charger starts to charge the spare battery as soon
as it has finished charging the phone battery.
Connect either the Fast Travel Charger (ACH-4U) or the
Fast Cigarette Lighter Charger (LCH-2) to the stand,
and then plug the Fast Travel Charger or Fast Cigarette
Lighter Charger into a wall outlet or vehicle respectively.
Place the phone and/or the spare battery in the stand.
To discharge the spare battery, press the blue button
on the stand. When the battery is totally discharged,
recharging starts automatically. (If you wish to stop
discharging, press the button again to start the
charging right away.) Only the spare battery can be
discharged.
The blinking red light indicates discharging, the
continuous red light indicates recharging and the green
light indicates trickle charging. The phone is ready for
use when the green light appears (check the charge on
the phone display).
Light Desk Stand (CHH-2L)
The Light Desk Stand (CHH-2L)
offers support for the phone
during charging. Used together
with the Standard Travel Charger
(ACH-3U), Fast Travel Charger
(ACH-4U,) or the Fast Cigarette
Lighter Charger (LCH-2), this
drop-in stand is an economical
choice when you need your
phone close at hand, always ready for calls.
Charging is indicated by the scrolling battery bars on
the right side of the phone’s display. Charging is
finished when the scrolling stops.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
13. Care and Maintenance
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you to fulfill the warranty
obligations and to enjoy this product for many years.
Keep the phone and all its parts and accessories out of
small childrens’ reach.
Keep the phone dry. Precipitation, humidity and liquids
contain minerals that will corrode electronic circuits.
Do not use or store the phone in dusty, dirty areas. Its
moving parts can be damaged.
Do not store the phone in hot areas. High temperatures
can shorten the life of electronic devices, damage
batteries, and warp or melt certain plastics.
Do not store the phone in cold areas. When the phone
warms up (to its normal temperature), moisture can
form inside the phone, which may damage electronic
circuit boards.
Do not attempt to open the phone. Non-expert
handling of the phone may damage it.
Do not drop, knock or shake the phone. Rough
handling can break internal circuit boards.
Do not use harsh chemicals, cleaning solvents, or
strong detergents to clean the phone. Wipe it with a
soft cloth slightly dampened in a mild soap-and-water
solution.
If the phone or any of its accessories are not working
properly, take them to your nearest qualified service
facility. The personnel there will assist you, and if
necessary, arrange for service.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
14. Technical Data
Cellular System
Weight
TDMA and AMPS
7.9 oz (224g) with 550mAh
NiMH battery
Capacity
169 cc
Frequency Range
824.010 - 848.970 MHz (TX)
869.010 - 893.970 MHz (RX)
Transmitter Output Power
Battery Voltage
0.4mW to 600mW nominal
6 V nominal
Charging Current
800mA typical
Operating Temperature
-20° C to + 40° C
(-4° F to + 104° F)
Number of Channels
Number of NAMs
Memory Locations
Memory Capacity
832
3
100
Alpha: 16 digits per location
Numeric: 16 digits per location
+ 30 digits in 8 locations.
USA
NOKIA MOBILE PHONES – 6200 Courtney Campbell
Causeway, Suite 900, P.O. Box 30730, Tampa, FL 33630.
Tel: 1-800-666-5553
CANADA
NOKIA PRODUCTS LTD. – 575 Westney Rd. South,
Ajax, Ontario L1S 4N7. Tel: (905) 427-6654
NOKIA and the Arrows logo are registered trademarks of Nokia
Corporation.
The information contained in this User Guide was written for dual-mode
phone NHC-4NE/HE.
The right to make changes and improvements to any of the products
described in this guide without prior notice is reserved.
Issue No. 1. © 1996 Nokia Mobile Phones. All rights reserved.
These commodities are authorized by the U.S. Government for export only
to Canada, Mexico, or the United States. They may not be resold, diverted,
transferred, or otherwise disposed of in any other country, either in their
original form or after being incorporated through an intermediate process
into other end-items, without the written approval of the U.S. Department
of State.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
NOKIA One-Year Limited Warranty
Nokia Mobile Phones, Inc. (“NMPI”) warrants that this cellular
phone (“Product") is free from defects in material and
workmanship, according to the following terms and conditions:
1.
The limited warranty for the Product extends for ONE (1)
year beginning on the date of purchase of the Product.
2.
The limited warranty extends only to the original consumer
purchaser (“Consumer”) of the Product and is not
assignable or transferable to any subsequent
purchaser/end user.
3.
4.
The limited warranty extends only to Consumers who
purchase the Product in the United States.
During the limited warranty period, NMPI will repair, or
replace, at NMPI’s option, any defective parts, or any
parts that will not properly operate for their intended use
with new or factory rebuilt replacement items. No charge
will be made to the Consumer for any such parts . NMPI
will also pay for the labor charges incurred by NMPI in
repairing or replacing the defective parts. The external
housing and cosmetic parts shall be free of defects at the
time of shipment and, therefore, shall not be covered
under these limited warranty terms.
5.
6.
Upon request from NMPI, the Consumer must provide
information to reasonably prove the date of purchase.
The Consumer shall bear the cost of shipping the Product
to the Customer Service Department of NMPI. NMPI shall
bear the cost of shipping the Product back to the
Consumer after the completion of service under this
limited warranty.
7.
a)
The Consumer shall have no coverage or benefits under
this limited warranty if any of the following conditions are
applicable:
The Product has been subject to abnormal use, abnormal
conditions, improper storage, exposure to moisture or
dampness, unauthorized modifications, unauthorized
connections, unauthorized repair, misuse, neglect, abuse,
accident, alteration, improper installation, or other acts
which are not the fault of NMPI, including damage caused
by shipping and blown fuses.
b)
The Customer Service Department at NMPI was not notified
by Consumer of the alleged defect or malfunction of the
Product during the applicable limited warranty period.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
c)
d)
The Product serial number plate or the accessory date
code has been removed, defaced, or altered.
The defect or damage was caused by the defective
function of the cellular system, or by inadequate signal
reception by the external antenna.
8.
If a problem develops during the limited warranty period,
the Consumer should take the following step-by-step
procedure:
a)
b)
The Consumer shall return the Product to the place of
purchase for repair or replacement processing.
If “a” is not convenient the Consumer may contact the
Customer Service Department at NMPI, at the phone
number listed on the bottom of this page for further
instructions.
c)
d)
The Consumer shall ship the Product prepaid and insured.
Expenses related to removing the Product from an
installation are not covered under this limited warranty.
The Consumer will be billed for any parts or labor charges
not covered by this limited warranty. The Consumer shall
be responsible for expenses related to reinstallation of the
Product.
e)
If the Product is returned to the Customer Service
Department at NMPI during the limited warranty period,
but the problem with the Product cannot be fixed under
the terms and conditions of this limited warranty, the
Consumer will be notified and given an estimate of the
charges the Consumer must pay to have the Product
repaired, with all shipping charges billed to the Consumer.
If the estimate is refused, the Product will be returned
freight collect. If the Product is returned to the Customer
Service Department at NMPI after the expiration of the
warranty period, NMPI’s normal service policies shall
apply and the Consumer will be invoiced for all shipping
charges.
9.
The Product consists of newly assembled equipment that
may contain used components which have been
reprocessed to allow machine compliance with Product
performance and reliability specifications.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
10. ANY IMPLIED WARRANTY OF MERCHANTABILITY, OR
FITNESS FOR A PARTICULAR PURPOSE OF USE,
SHALL BE LIMITED TO THE DURATION OF THE
FOREGOING WRITTEN WARRANTY, OTHERWISE, THE
FOREGOING WARRANTY IS THE PURCHASER’S SOLE
AND EXCLUSIVE REMEDY AND IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED. NMPI SHALL
NOT BE LIABLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES OR A LOSS OF
ANTICIPATED BENEFITS OR PROFITS, RESULTING
FROM THE PURCHASE OR USE OF THE PRODUCT OR
ARISING FROM THE BREACH OF THE WARRANTY
EVEN IF NMPI KNEW OF THE LIKELIHOOD OF SUCH
DAMAGES.
11. Some states do not allow limitation of how long an implied
warranty lasts, so the above limitation may not apply to
you (the Consumer). Some states do not allow the
exclusion of incidental or consequential damages, so the
above limitation or exclusions may not apply to you (the
Consumer). This limited warranty gives you specific legal
rights and you may also have other rights which vary from
state to state.
12. NMPI neither assumes nor authorizes any authorized
service center or any person or entity to assume for it any
other obligation or liability beyond that which is expressly
provided for in this limited warranty.
13. Questions concerning this limited warranty may be directed
to the Customer Service Department at Nokia, 6200
Courtney Campbell Causeway, Suite 900, Tampa, FL
33630. Telephone (813) 288-3800 or 1-800-666-5553,
Facsimile: (813) 287-6612.
14. The limited warranty period for Nokia Product Corp.
supplied attachments and accessories are specifically
defined within their own warranty cards and packaging.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
14. Technical Data
Cellular System
Weight
TDMA and AMPS
7.9 oz (224g) with 550mAh
NiMH battery
Capacity
169 cc
Frequency Range
824.010 - 848.970 MHz (TX)
869.010 - 893.970 MHz (RX)
Transmitter Output Power
Battery Voltage
0.4mW to 600mW nominal
6 V nominal
Charging Current
800mA typical
Operating Temperature
-20° C to + 40° C
(-4° F to + 104° F)
Number of Channels
Number of NAMs
Memory Locations
Memory Capacity
832
3
100
Alpha: 16 digits per location
Numeric: 16 digits per location
+ 30 digits in 8 locations.
LATIN AMERICA
NOKIA MOBILE PHONES – 2300 Valley View Lane, Suite 100
Irving, TX 75062 USA. Tel: (214) 257-9800
USA
NOKIA MOBILE PHONES – 6200 Courtney Campbell
Causeway, Suite 900, P.O. Box 30730, Tampa, FL 33630.
Tel: 1-800-666-5553
NOKIA and the Arrows logo are registered trademarks of Nokia
Corporation.
The information contained in this User Guide was written for dual-mode
phone NHC-4NE/HE.
The right to make changes and improvements to any of the products
described in this guide without prior notice is reserved.
Issue No. 1. © 1996 Nokia Mobile Phones. All rights reserved.
These commodities are authorized by the U.S. Government for export only
to Canada, Mexico, or the United States. They may not be resold, diverted,
transferred, or otherwise disposed of in any other country, either in their
original form or after being incorporated through an intermediate process
into other end-items, without the written approval of the U.S. Department
of State.
Download from Www.Somanuals.com. All Manuals Search And Download.
|
