User’s Guide for Nokia 2112
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
incoming call............................................. 8
the keypad locked.................................... 9
characters................................................ 11
the battery................................................. 7
Install the key mat and
front cover.............................................. 7
Replace the battery and
back cover .............................................. 7
Copyright 2004 Nokia. All rights reserved.
iii
©
Download from Www.Somanuals.com. All Manuals Search And Download.
Write down voice mailbox number
and process ......................................... 24
Set up voice mail with
dialling codes...................................... 25
Save the message to
(business cards)......................................... 17
Sending a message to
a distribution list............................... 20
iv
Copyright 2004 Nokia. All rights reserved.
©
Download from Www.Somanuals.com. All Manuals Search And Download.
Allowed phone number
when phone locked........................... 41
and time .................................................. 39
Copyright 2004 Nokia. All rights reserved.
v
©
Download from Www.Somanuals.com. All Manuals Search And Download.
If an alarm has previously
been set................................................ 48
Options while viewing
information ...........................63
the alarm sounds .................................. 53
vi
Copyright 2004 Nokia. All rights reserved.
©
Download from Www.Somanuals.com. All Manuals Search And Download.
For your safety
USE SENSIBLY
Use only in the normal position as
explained in the product
documentation. Don't touch the
antenna unnecessarily.
Read these simple guidelines. Not
following them may be dangerous or
illegal. Read the complete user guide for
further information.
SWITCH ON SAFELY
Do not switch the phone on
when wireless phone use is
prohibited or when it may cause
interference or danger.
QUALIFIED SERVICE
Only qualified personnel may
install or repair this product.
ENHANCEMENTS AND BATTERIES
Use only approved enhancements
and batteries. Do not connect
incompatible products.
ROAD SAFETY COMES FIRST
Obey all local laws. Always keep
your hands free to operate the
vehicle while driving. Your first
consideration while driving
should be road safety.
WATER-RESISTANCE
Your phone is not
water-resistant. Keep it dry.
INTERFERENCE
BACKUP COPIES
All wireless phones may be
Remember to make back-up
susceptible to interference,
which could affect performance.
copies or keep a written record of
all important information stored
in your phone.
SWITCH OFF IN HOSPITALS
Follow any restrictions. Switch
the phone off near medical
equipment.
CONNECTING TO OTHER DEVICES
When connecting to any other
device, read its user guide for
detailed safety instructions. Do
not connect incompatible
products.
SWITCH OFF IN AIRCRAFT
Follow any restrictions. Wireless
devices can cause interference
in aircraft.
EMERGENCY CALLS
Ensure the phone is switched on
SWITCH OFF WHEN REFUELING
Don't use the phone at a
refuelling point. Don't use near
fuel or chemicals.
and in service. Press the End key
as many times as needed to clear
the display and return to the
main screen. Key in the
emergency number, then press
the Send key. Give your location.
Do not end the call until given
permission to do so.
SWITCH OFF NEAR BLASTING
Follow any restrictions. Don’t
use the phone where blasting is
in progress.
Copyright 2004 Nokia. All rights reserved.
vii
©
Download from Www.Somanuals.com. All Manuals Search And Download.
Welcome
Congratulations on your purchase of
the Nokia 2112 mobile phone. Your
phone provides many functions
which are practical for daily use,
such as a hands-free loudspeaker,
alarm clock, calculator, calendar, and
more. To personalise your phone, you
can set your favorite ring tones and
select an Xpress-onTM colour cover.
■ Network services
To use the phone you must have
service from a wireless service
provider. Many of the features in this
device depend on features in the
wireless network to function. These
network services may not be
available on all networks or you may
have to make specific arrangements
with your service provider before you
can utilise network services. Your
service provider may need to give
you additional instructions for their
use and explain what charges will
apply. Some networks may have
limitations that affect how you can
use network services. For instance,
some networks may not support all
language-dependent characters and
services.
■ About your device
The wireless phone described in this
guide is approved for use on the
CDMA 800 network. Contact your
service provider for more
information about networks.
When using the features in this
device, obey all laws and respect
privacy and legitimate rights of
others.
Your service provider may have
requested that certain features be
disabled or not activated in your
device. If so, they will not appear in
your device menu. Contact your
service provider for more
Warning: To use any features
in this device, other than the
alarm clock, the phone must
be switched on. Do not
switch the device on when
wireless phone use may
information.
cause interference or danger.
viii
Copyright 2004 Nokia. All rights reserved.
©
Download from Www.Somanuals.com. All Manuals Search And Download.
■ Shared memory
The following features in this device
may share memory: contacts, text
messages, ring tones, calendar, and
games. Use of one or more of these
features may reduce the memory
available for the remaining features.
Your phone may display a message
that the memory is full when you try
to use a shared memory feature. In
this case, delete some of the
information or entries stored in the
shared memory features before
continuing. Some of the features,
such as messages and ring tones
may have a certain amount of
memory specially allotted to them in
addition to the memory shared with
other features.
Copyright 2004 Nokia. All rights reserved.
ix
©
Download from Www.Somanuals.com. All Manuals Search And Download.
N o k i a 2 1 1 2 p h o n e a t
a
g l a n c e
1. Nokia 2112 phone at a glance
1. Power key
7. Microphone
2. Earpiece
8. Charger port
9. Scroll up and down key
10. Send key
3. Right selection key
4. End key
5. Keypad
11. Left selection key
12. Screen
6. Connection port
Copyright 2004 Nokia. All rights reserved.
1
©
Download from Www.Somanuals.com. All Manuals Search And Download.
N o k i a 2 1 1 2 p h o n e a t
a
g l a n c e
4. Contacts — Press the Right
selection key to select this
option.
■ The standby screen
The standby screen is home base and
indicates your phone is in idle mode.
■ Quick keys
At the standby screen, the scroll key
instantly takes you to
frequently-accessed menus and
features:
1. Signal strength — A higher bar
indicates a stronger network
signal.
• Scroll up key — Activate the
flashlight.
2. Battery level — A higher bar
indicates more power in the
battery.
• Scroll down key — Go to the
contacts list.
3. Menu — Press the Left selection
key to select this option.
■ Indicators and icons
Icon
Indicates...
You have one or more text or picture messages.
You have one or more voice messages.
Your phone’s keypad is locked. See "Keyguard" on
Your phone is set to the Silent profile. See "Profiles
The alarm clock is set to On. See "The alarm clock" on
The countdown timer is running. See "The countdown
The stopwatch timing is running in the background.
Integrated handsfree is active.
2
Copyright 2004 Nokia. All rights reserved.
©
Download from Www.Somanuals.com. All Manuals Search And Download.
N o k i a 2 1 1 2 p h o n e a t
a
g l a n c e
Icon
Indicates...
The timed profile is selected. See "Profiles (Menu 3)"
An enhancement is connected to the phone.
or
Voice privacy encryption is active (or is not active) in
the network.
or
• Send and End keys: Press the
■ Get the most out of
Send key to place a call or to
answer an incoming call. Press
the End key to end a call or press
and hold to return to the idle
screen.
this guide
The following sections illustrate the
various components of your phone.
Familiarise yourself with these
sections to help you understand the
instructions that follow.
■ Phone menus
Phone features are grouped
according to function and are
accessed through the main menu.
Each main menu contains submenus
and lists from which you can select
or view items and personalise your
phone features. You can access these
menus and submenus by using the
scroll method or by using a shortcut.
This guide uses certain terms for the
steps that you are asked to perform.
• Press means to press and release
a key quickly. For example, Press
7 means press the key on the
keypad that is labeled with the
number 7 and the letters “p q r s”.
• Press and hold means to press
and hold a key for 2–3 seconds,
then release the key.
Note: Some features may not
be available, depending on
your network. For more
information, contact your
wireless provider.
• Selection keys are used to select
a menu option. To select an
option, press the selection key
below the menu item on the
phone’s screen.
• Scroll keys are used to move up
and down in the menus.
Copyright 2004 Nokia. All rights reserved.
3
©
Download from Www.Somanuals.com. All Manuals Search And Download.
N o k i a 2 1 1 2 p h o n e a t
a
g l a n c e
The scroll method
In-phone help
1. At the standby screen, select
Many features have brief
Menu, and scroll through the
main menu using the up and
down scroll key.
descriptions (help text) that can be
viewed on the display. To view these
descriptions, scroll to a feature, and
wait for about 10 seconds. If needed,
press More to view all of the
2. When you arrive at a menu, press
Select (the Left selection key) to
enter submenus.
description, or press Back to exit.
In order to view the descriptions, you
must first activate help text.
• Press Back (the Right
selection key) to return to the
previous menu.
1. At the standby screen, select
Menu > Settings > Phone
• Press the End key to return to
the standby screen from any
menu or submenu.
settings > Help text activation.
2. Highlight On to display help text
or Off to turn this feature off, and
press Select.
Shortcuts
You can go directly to almost any
menu or submenu, as well as
activate most features by using a
shortcut.
At the standby screen, select Menu;
then within 3 seconds press the key
or keys associated with the menu
function you would like to view or
activate.
For example, to select the Meeting
profile, select Menu 3-3-1 from the
standby screen (Menu > 3Profiles >
3Meeting > 1Select). After a brief
pause, the Meeting profile is
activated.
4
Copyright 2004 Nokia. All rights reserved.
©
Download from Www.Somanuals.com. All Manuals Search And Download.
S e t u p y o u r p h o n e
2. Set up your phone
■ The antenna
■ The battery
Always switch the device off and
disconnect the charger before
removing the battery.
Your device has an internal antenna
located towards the top of the
phone. Hold the phone as you would
any other telephone with the
antenna area pointed up and over
your shoulder.
Remove the back cover
1. With the back of the phone
facing you, push down on the
button on the back of the phone.
Note: As with any other radio
transmitting device, do not
touch the antenna
unnecessarily when the
device is switched on.
Contact with the antenna
affects call quality and may
cause the phone to operate
at a higher power level than
otherwise needed. Avoiding
contact with the antenna
area when operating the
phone optimises the antenna
performance and the battery
life.
2. Slide the back cover toward the
bottom of the phone and remove.
Remove the battery
• After you have removed the back
cover, insert your finger into the
finger grip and lift the battery
from its compartment.
Replace the battery
1. Position the battery so the
gold-coloured contacts match up
with those on the phone.
The battery label should be facing
away from the phone.
2. Insert the battery, gold-coloured
contact end first, into the battery
slot.
Copyright 2004 Nokia. All rights reserved.
5
©
Download from Www.Somanuals.com. All Manuals Search And Download.
S e t u p y o u r p h o n e
3. Push down on the other end of
the battery to snap the battery
into place.
■ Turn your phone on
or off
To turn your phone on or off, press
and hold the power key on top of the
phone for at least 3 seconds.
Replace the back cover
• Slide the back cover toward the
top of the phone until you hear a
click and see the back cover
release button.
■ Connect the headset
A compatible headset may be
purchased with your phone or
separately as an enhancement.
Charge the battery
1. Plug the charger transformer in
to a standard ac outlet.
2. Insert the charger output plug
into the round jack at the bottom
end of the phone.
1. Plug the headset connector into
the Pop-PortTM connector at the
bottom end of your phone.
2. Position the headset on your ear.
After a few seconds, the battery
indicator in the display starts to
scroll from bottom to top. If the
battery is completely flat, it may
take a few minutes before the
charging indicator appears on
the display or any calls can be
made.
With the headset connected, you
can make, answer, and end calls
as usual.
• Use the keypad to enter
numbers.
• Press the Send key to place a
call.
• Press the End key to end a
call.
6
Copyright 2004 Nokia. All rights reserved.
©
Download from Www.Somanuals.com. All Manuals Search And Download.
S e t u p y o u r p h o n e
Install the key mat and
■ ChangetheXpress-on
™
front cover
covers
1. Remove the key mat from the old
front cover and place it into the
new front cover as shown.
Note: Before removing the
cover, always switch off the
power and disconnect the
charger and any other device.
Avoid touching electronic
components while changing
the covers. Always store and
use the device with the covers
attached.
2. Press the front cover and key mat
against the phone and snap the
front cover into place.
Remove the back cover
and the battery
page 5 for instructions on removing
the back cover and the battery.
Remove the front cover
• Gently pull the bottom of the
front cover away from the rest of
the phone and remove.
Replace the battery and
back cover
Replace the battery and back cover
■ Inserting a photo in
the back cover
You can insert one of your favourite
photos in the back cover to
personalise your phone. The size of
the photo should not be larger than
45mm x 25mm. Trim the sides and
corners at the bottom of the photo.
Please note, if the photo is smaller
than the window size, it may not
stay in its position. The photo should
Copyright 2004 Nokia. All rights reserved.
7
©
Download from Www.Somanuals.com. All Manuals Search And Download.
S e t u p y o u r p h o n e
be inserted with its image side
facing the transparent window of
the cover.
Make a conference call
Conference calling is a network
service that allows you to take part
in a conference call with two other
participants.
1. Make a call to the first participant.
2. With the first participant on the
line, select Options > New call,
and press Select.
■ Make a call
3. Enter the phone number of the
second participant, or press
Search to retrieve a number from
the contacts list.
Use the keypad
1. Enter the phone number
(including the area code), and
press the Send key. (To delete a
character to the left of the cursor,
press Clear.)
4. Press Flash.
The first participant is put on hold.
5. When the second participant
picks up, press the 3 key and then
the Send key to connect the calls.
2. Press the End key to end the call
or to cancel the call attempt.
6. To end the conference call, press
Options > End all calls, or press
the End key.
Use the contacts list
1. At the standby screen, press the
Scroll down key to display the
contents of your contacts list.
■ Answer calls
2. Press the Send key to make the
call, or press Details to view
details of the entry.
Answer or silence an
incoming call
1. Press the Send key to answer the
call.
Use the last dialled number
2. Press the End key or Silence to
1. At the standby screen, press the
Send key to display the last 20
numbers dialled.
mute the ringing tone.
3. Press Answer to answer the call
or press Silence (or do nothing)
and the call is eventually diverted
to voicemail.
2. Scroll to the number (or name)
you wish to redial, and press the
Send key.
8
Copyright 2004 Nokia. All rights reserved.
©
Download from Www.Somanuals.com. All Manuals Search And Download.
S e t u p y o u r p h o n e
The loudspeaker is deactivated
automatically when a call (or a call
attempt) ends or when certain
enhancements are connected.
Answer a call with the
keypad locked
To answer a call with the keypad
locked, simply press the Send key.
During the call, all features function
as normal. When you end or reject
the call, the keypad automatically
Options during a call
Many of the options that you can
use during a call, are network
services. Check with your wireless
service provider for more
information.
When the phone is locked, calls still
may be possible to the official
emergency number programmed
into your phone.
1. Press Options during a call to
display a list of options available
during a call.
Adjust the volume during a
call
2. Select an option.
• To increase the volume during a
call, press the Scroll up key.
■ Keyguard
• To decrease the volume during a
With keyguard, you can lock the
keypad to prevent keys from being
pressed accidentally. Remember to
lock your phone keypad to prevent
accidental calls. If the keypad is
locked, it unlocks when you receive a
call. After the call, the lock
call, press the Scroll down key.
• When adjusting the volume, a bar
chart appears in the display
indicating the volume level.
The loudspeaker
automatically reactivates.
You can use your phone as a
loudspeaker during a call. Do not
hold the phone to your ear during
the loudspeaker operation.
When the keyguard is on, calls still
may be possible to the official
emergency number programmed
into your phone. Key in the
emergency number, and press the
Send key.
• To activate the loudspeaker, press
Loudsp.
• To deactivate the loudspeaker
during a call, press Handset.
Copyright 2004 Nokia. All rights reserved.
9
©
Download from Www.Somanuals.com. All Manuals Search And Download.
S e t u p y o u r p h o n e
Lock the keypad
Select Menu with the Left selection
key, and press * within two seconds.
Unlock the keypad
Select Unlock with the Left
selection key, then press the * key
within two seconds.
■ Flashlight
Your phone has a
built-in flashlight
that you can
activate when the
phone is in the
standby mode or
when there is a call in progress. To
activate the flashlight, press and
hold the Scroll up key. The light stays
on until you release the Scroll up key.
OR
Press the Scroll upkey twice in quick
succession. The light stays on until
you press the Scroll up key again.
You can also use the flashlight to
alert you to an incoming call. For
10
Copyright 2004 Nokia. All rights reserved.
©
Download from Www.Somanuals.com. All Manuals Search And Download.
T e x t e n t r y
3. Text entry
You can use two methods for
entering text and numbers:
Numbers (123)
To switch to 123 mode from Abc
mode, press and hold # at any
message entry screen until the icon
in the upper left corner of the display
switches from Abc to 123 (or vice
versa).
• Standard mode is the only way to
enter text into the contacts list,
and to rename caller groups.
• T9 predictive input is a quick and
easy method for writing
messages, creating a calendar
note.
• Press Clear to backspace the
cursor and delete a character.
This phone also supports entering
text in Hindi. You can compose and
send messages in the Hindi
• Press and hold Clear to backspace
continuously and delete
characters.
language, when the phone language
selected is Hindi. Please refer to the
Hindi version of this user guide for
more details.
Punctuation and special
characters
While at any text entry screen, press
* to display special characters (press
and hold * if predictive text is on).
You can navigate through the list of
special characters by using the scroll
key. Once a character is highlighted,
press Use to insert the character into
your message.
■ Standard mode
Text (Abc)
• Press a key once to insert the first
letter on the key, twice for the
second letter, etc. If you pause
briefly, the last letter in the
display is accepted and your
phone awaits the next entry.
■ Predictive text input
Predictive text input allows you to
write messages quickly using your
keypad and the built-in dictionary.
It is much faster than the standard
mode method, because for each
letter, you only press the
• Press 0 to enter a space thereby
accepting a completed word.
• Press 1 to enter a period (.).
• Press * to display special
characters. See more about special
characters on the following pages.
corresponding key on your keypad
once.
Copyright 2004 Nokia. All rights reserved.
11
©
Download from Www.Somanuals.com. All Manuals Search And Download.
T e x t e n t r y
• If ? appears after a word, press
Spell to add the word to the
dictionary.
Activate/deactivate
At any text entry screen, press and
hold Options. Predictive text is
turned on and off, depending on its
previous mode.
• Press 1 to insert a period into
your message.
• Press and hold the *key to display
special characters. Press * again
to cycle through all available
characters.
OR
1. At any text entry screen, select
Options > Dictionary and press
Select.
• Press # to switch predictive text
on or off and to use predictive
text in various modes. As you
press #, the following icons (not
the descriptions) appear in the
upper left of the display screen:
2. Scroll to the language of your
choice, and press Select.
Note: The language setting
affects the time and date
formats of the clock, alarm
clock, and calendar.
Uppercase text: standard
mode is On.
Text entry
Lowercase text: standard
mode is On
The illustration below simulates your
display each time a key is pressed.
For example, to write Nokia with
predictive text on and with the
English dictionary selected, press
each of the following keys once:
Sentence case text:
standard mode is On.
Sentence case text:
predictive text is On.
the 6 key the 6 key the 5 key the 4 key the 2 key
Lowercase text:
predictive text is On.
• Press 0 to enter a space and begin
writing the next word.
• If a displayed word is not correct,
press the * key to see other
matches. To return to the
previous word in the list of
matches, press Previous.
12
Copyright 2004 Nokia. All rights reserved.
©
Download from Www.Somanuals.com. All Manuals Search And Download.
C o n t a c t s l i s t
4. Contacts list
The contacts list can hold up to 250
contacts, with multiple numbers and
text notes for each contact. The
amount of numbers and text entries
that you can save may vary,
depending on length and the total
number of entries in the contacts
list.
Save addresses and notes
To save an address or note, you need
to add it to an existing entry
(contact).
1. At the standby screen, press the
Scroll down key to display a list
of entries in your contacts list.
2. Scroll to a name you would like to
add information to and press
Details.
■ Add new contacts
3. Select Options > Add detail, and
Save a name and number
1. At the standby screen, enter the
press Select.
You can add an E-mail, Web
address, Postal addr., or Note to
the entry.
phone number you wish to save.
2. Select Options > Save, and press
Select.
4. Select the address or note of your
choice.
3. Enter the name, and press OK.
5. Enter the text for the note or
Save (only) a number
1. At the standby screen, enter the
address, and press OK.
phone number you wish to save.
Save multiple numbers and
text items
2. Press and hold Options.
You can save different types of
phone numbers and short text items
per name to the contacts list. The
first number you save for any entry is
automatically set as the default, but
the default number can always be
changed.
Save an entry
1. At the standby screen, select
Contacts > Add new, and press
Select.
2. Enter the name, and press OK.
3. Enter the phone number, and
press OK > Done.
Copyright 2004 Nokia. All rights reserved.
13
©
Download from Www.Somanuals.com. All Manuals Search And Download.
C o n t a c t s l i s t
1. At the standby screen, press the
Scroll down key to display a list
of entries. Scroll to the entry to
which you wish to add a phone
number or text item.
that group. This enables you to
identify callers from the group by
their unique ring tone or graphic.
Set up a group
1. At the standby screen, press the
Scroll down key to display a list
of entries in your contacts list.
2. Press Details > Options > Add
number or Add detail, and press
Select.
2. Scroll to a name you would like to
add to a caller group, and press
Details.
3. Select General, Mobile, Home,
Office, Fax, or E-mail, Web
address, Postal addr., or Note.
3. Select Options > Caller groups,
4. Enter the number or text for the
type you have selected, and press
OK.
and press Select.
4. Scroll to the caller group to
which you would like to add the
name, and press Select.
5. To change the type, select
Change type in the options list.
Options
You can also change which phone
number is the default number for the
contact entry.
1. At the standby screen, select
Contacts > Caller groups, and
press Select.
1. At the standby screen, press the
Scroll down key and scroll to the
entry you wish to change, and
press Details.
Family, VIP, Friends, Business,
and Other are the available caller
groups.
2. Use the scroll key to highlight a
group, and press Select to display
the following caller group
options:
2. Scroll to the number you wish to
set as default, select Options >
Set as default, and press Select.
Group name — Rename the group
to your preference.
Set up voice tags
For more information on setting up
voice tags and other voice features.
Group ringing tone — Set the
ringing tone for the group.
Group logo — Turn the graphic for
the caller group on or off.
Caller groups
You can add contacts list entries to
any of five caller groups, and assign
a unique ringing tone or graphic to
Group members — Add or remove
members from the caller group.
14
Copyright 2004 Nokia. All rights reserved.
©
Download from Www.Somanuals.com. All Manuals Search And Download.
C o n t a c t s l i s t
4. Enter a name for the entry, and
Set up speed dialling
press OK.
You can associate any entry in the
contacts list with a key from 2–9;
then dial those entries by pressing
and holding the assigned key.
Delete speed dialling numbers
1. At the standby screen, select
Contacts > Speed dials, and press
Select.
Assign a key to speed dialling
1. At the standby screen, select
Contacts > Speed dials, and press
Select.
2. Scroll to the speed dialling
location you wish to delete, and
press Options.
3. Select Delete.
2. Scroll to any empty slot, and
press Assign.
4. Press OK to delete the key
assignment.
3. Enter the number (including the
area code), and press OK; or press
Search to retrieve a number from
the contacts list.
■ Edit contacts list entries
1. At the standby screen, press the
Scroll down key to display the
contents of your contacts list.
4. Enter the contact name for the
number, and press OK.
If speed dialling is off, the phone
displays a prompt asking if you
would like to turn speed dialling
on.
2. Scroll to the entry you would like
to edit, and press Details.
3. Scroll to the phone number you
wish to edit, and press Options.
5. Press Yes to activate speed
4. Select one of the following
options:
dialling.
Change speed dial numbers
1. At the standby screen, select
Contacts > Speed dials, and press
Select.
Add voice tag — Add a voice tag
to the contact.
Edit number — Edit an existing
phone number of the contact.
2. Scroll to the speed dialling entry
you wish to change, select
Options > Change, and press
Select.
Delete number — Delete a phone
number from the contact.
Use number — Display the phone
number on the standby screen,
ready to be called.
3. Enter the new number, or press
Search to retrieve a number from
the contacts list, and press OK.
View — View the details of the
contact.
Copyright 2004 Nokia. All rights reserved.
15
©
Download from Www.Somanuals.com. All Manuals Search And Download.
C o n t a c t s l i s t
Change type — Change the
number type to General, Mobile,
Home, Office, or Fax or the detail
type to E-mail, Web address,
Postal addr., or Note.
■ Delete contacts list
entries
1. At the standby screen, select
Contacts > Delete, and press
Select.
Set as default — Change the
default number of the contact.
2. To delete individual entries, scroll
to One by one and press Select.
Add number — Add a number to
the contact.
3. Scroll to the entry you wish to
delete, press Delete > OK to
confirm.
Add detail — Add an address or
note to the contact.
4. To delete the entire contents of
your contacts list, scroll to Delete
all.
Caller groups — Add the contact
to an existing caller group.
Custom tone — Add a custom ring
tone to the contact.
5. Select Phone, press Delete > OK
to confirm.
Send bus. card — Send the
contact as a business card to
another phone.
6. Enter the security code, and press
Send message — Create and send
a message to the contact.
■ View the contacts list
1. At the standby screen, select
Contacts. The following menu
items appear:
Speed dial — Add the contact to
your speed dial list.
Edit name — Edit the name of the
contact.
Search — Find a name or select
View name — View the name of
from a list.
the contact.
Add new — Add a contact to your
Delete — Delete the entire
contact entry from your contacts
list.
contacts list.
Edit name — Edit an existing
name.
5. Edit the option to your
Delete — Delete a name and its
associated numbers.
preference, and press OK.
Add number — Add a number to
an existing name.
16
Copyright 2004 Nokia. All rights reserved.
©
Download from Www.Somanuals.com. All Manuals Search And Download.
C o n t a c t s l i s t
Settings — Change the contacts
list view or check the memory
status of your phone.
Configure settings
You can select how the contacts
appear in your contacts list, and
view the amount of memory used or
available in your phone.
Speed dials — View or modify the
list of speed dialling numbers.
Voice tags — Attach, listen to, or
modify a voice tag to a contact in
the contacts list.
Contacts view
1. At the standby screen, select
Contacts > Settings and press
Select.
Caller groups — View and edit the
properties for any of the caller
groups, including Family, VIP,
Friends, Business, or Other.
2. Scroll to Scrolling view and press
Select. Select Name list or Name
and no.
2. Scroll to an item, and press Select
to activate the feature or enter
its submenu.
Memory status
1. At the standby screen, select
Contacts > Settings and press
Select.
Search for a name
1. At the standby screen, press the
Scroll down key to display the
contents of your contacts list.
2. Scroll to Memory status and
press Select.
■ Send and receive
contacts (business
cards)
You can send and receive an entry in
your contacts list using a text
message, if supported by your
wireless provider.
2. Press the key which corresponds
to the first letter of the name for
which you are performing a
search.
3. Scroll up and down to select a
contact, and press Details to view
the details.
Copyright 2004 Nokia. All rights reserved.
17
©
Download from Www.Somanuals.com. All Manuals Search And Download.
C o n t a c t s l i s t
Send a business card
You can send a business card as a
text message to a compatible phone
or other handheld device.
1. At the standby screen, press the
Scroll down key to display the
contents of your contacts list.
Highlight an entry from the
contacts list that you wish to
send, select Details and select
Options > Send bus. card, and
press Select.
To send the business card as a
message, select Via text msg.
2. Select Default number or All
details (only if contact has more
than one phone number) and
press Select.
3. Enter the number for your
recipient or press Search to
retrieve a number from your
contacts list.
4. Press OK. The business card is
sent.
18
Copyright 2004 Nokia. All rights reserved.
©
Download from Www.Somanuals.com. All Manuals Search And Download.
M e s s a g e s ( M e n u 1 )
5. Messages (Menu 1)
If you have subscribed to a
2. Enter the recipient’s phone
number, or press Search to
retrieve a number from your
contacts list, and press OK.
messaging service through your
wireless provider, you can send and
receive messages to compatible
phones that also subscribe to a
compatible message service. You
may also be able to send and receive
picture messages, and e-mail
messages.
3. Press Options and scroll to Edit
message and press Select.
After a brief pause, the message
entry screen appears in the
display.
Note: When sending
4. Compose a message using the
messages, your device may
display Message sent. This is
an indication that the
keypad and press Options.
5. Scroll to Send and press Select.
message has been sent by
your device to the message
center number programmed
into your device. This is not
an indication that the
message has been received at
the intended destination. For
more details, about
Templates
Templates are short, prewritten
messages which can be recalled and
inserted into new text messages
when you are short on time.
1. At the standby screen, select
Menu > Messages > Text
messages > Create message >
Text > Add number and press
Select.
messaging services, check
with your service provider.
2. Enter the recipient’s phone
number, or press Search to
retrieve a number from your
contacts list, and press OK.
■ Text messages
Write and send
1. At the standby screen, select
Menu > Messages > Text
messages > Create message >
Text > Add number and press
Select.
3. Press Options and scroll to Edit
message and press Select.
After a brief pause, the message
entry screen appears in the
display.
Copyright 2004 Nokia. All rights reserved.
19
©
Download from Www.Somanuals.com. All Manuals Search And Download.
M e s s a g e s ( M e n u 1 )
4. Press Options, scroll to Use
After a brief pause, the message
entry screen appears in the
display.
template and press Select.
5. Scroll to one of the available
templates and press Select.
4. Compose a message using the
keypad.
6. Press Options and scroll to Send
and press Select.
5. Press Options > Send, and press
Select.
Creating a distribution list
1. At the standby screen, select
Menu > Messages > Text
messages.
Your message is then sent to each of
the recipient in the list.
Read and reply
When you receive a message, a
notification message displays and
the unopened letter icon (
appears in the display.
2. Scroll to Distribution lists and
press Select.
3. Press Options and scroll to Add
)
list and press Select.
4. Enter a name for the list and
1. Press Show to read the message,
press OK.
or Exit to move it to your inbox.
5. Add contacts to this list by
pressing Options > Add contact
and press Select.
When you have unopened
messages in your inbox,
shown in the upper left corner of
the standby screen as a reminder.
is
6. Add the contacts one by one to
this list.
Use the scroll keys (the Scroll up
key or the Scroll down key) to
view the whole message if
necessary.
Sending a message to a
distribution list
1. At the standby screen, select
Menu > Messages > Text
messages > Create message.
2. Select Options > Reply, and press
Select.
2. Scroll to Add list and press Select.
Scroll to a distribution list and
press OK.
3. Select a Start reply with option;
then compose your reply using
the keypad.
3. Press Options and scroll to Edit
4. Select Options > Send, and press
message and press Select.
Select.
20
Copyright 2004 Nokia. All rights reserved.
©
Download from Www.Somanuals.com. All Manuals Search And Download.
M e s s a g e s ( M e n u 1 )
Insert smiley — Insert the smiley face
of your choice into your message.
Options
When you create a text message,
depending on the mode of text input
you are using and the features
supported by your wireless service
provider, some or all of the following
options are available:
Insert word/Edit word — Enter or edit
the text of a new word that might
not appear in the predictive text
dictionary. This displays only when
the Dictionary is set to On.
Insert symbol — Insert a special
character into your message, this
displays only when the Dictionary is
set to On.
Send — Send the message to one
recipient.
List recipients — Send the message
to more than one recipient.
Dictionary — Choose a predictive
text language, and turn the
dictionary on or off.
Settings — Set the priority of the
message.
Save message — Select Sent items to
save the message in the sent items
folder; select Templates to save the
message as one of your predefined
templates; select Archive to save the
message in your archive.
Matches — View matches found in
the dictionary for the word you want
to use.
When you read or reply to a text
message, the following options are
available:
Clear text — Erase the text clipboard.
Delete — Discard the message.
Exit editor — Save the message to
your Sent items folder
automatically, and leave the
Reply — Reply to the message.
Create the message and press
Options, then Send. The sender’s
phone number or e-mail is used as
the default
message editor.
Insert contact — Insert a name from
your contacts list into your message.
Use number — Choose Save, Add to
contact, Send message, or Call.
Insert number — Insert a phone
number or find a phone number in
the contacts list.
Save — Save the message to a folder.
Forward — Forward the message to
another phone number.
Use template — Insert a predefined
template into your message.
Rename — Edit the title of the
message.
Insert picture — Insert a picture into
your message.
Copyright 2004 Nokia. All rights reserved.
21
©
Download from Www.Somanuals.com. All Manuals Search And Download.
M e s s a g e s ( M e n u 1 )
Save to sent items as sending —
Scroll to Always save, Always
prompt, or Off, and press Select.
Change sending options
1. At the standby screen, select
Menu > Messages > Text
messages > Message settings >
Send options and press Select.
■ Receive a Java SMS
message
2. Select the setting you wish to
change:
You can receive SMS messages
which trigger Java applications that
may be stored in your phone. An
example of the type of Java SMS that
you can receive is billing information
from your service provider. Your
phone may store the application
that is triggered to activate by the
data contained in a Java SMS.
Priority — Set the priority of the
note as Normal or Urgent, and
press Select.
Delivery reports — A note is sent
to you confirming delivery of the
message. Scroll to On or Off, and
press Select.
There are two types of SMS
Settings
messages which contain a Java
application: Non-automatic Java
SMS and Automatic Java SMS.
When the message memory is full,
your phone cannot send or receive
any new messages. However, you
can set your phone to automatically
replace old messages in the Inbox
and Sent items folders when new
ones arrive.
When you receive a non-automatic
Java SMS, a notification will appear
on the screen. At this point, you can
select Options or Exit. Selecting Exit
will save the unopened Java SMS to
the Inbox.
1. At the standby screen, select
Menu > Messages > Text
You can access the message from
the Inbox and launch its application
at a later time.
messages > Message settings >
Other settings, and press Select.
2. Scroll to the setting you wish to
If you select Options, then you can
choose from Launch, Delete, Save or
View details. Each option is
explained below.
change, and press Select.
Message font size — Scroll to
Small font or Large font, and
press Select.
When you receive an Automatic Java
SMS, the application is launched
immediately and no confirmation
note will appear on the screen.
Message overwriting — Scroll to
Sent items only, Inbox only,
S. items & inbox, or Off and press
Select.
22
Copyright 2004 Nokia. All rights reserved.
©
Download from Www.Somanuals.com. All Manuals Search And Download.
M e s s a g e s ( M e n u 1 )
Note: The ability to
Launch a Java SMS
download applications over
the air is dependent on your
service provider. To learn
more about this function,
contact your service provider.
Selecting Launch will actually
launch the Java application that is
referenced by the Java SMS. Once
the application has been launched,
then it is automatically deleted from
the Inbox and the application may
be saved in the Applications menu.
■ Voice messages
If you subscribe to voice mail, your
wireless provider will furnish you
with a voice mailbox number. You
need to save this number to your
phone to use voice mail. When you
receive a voice message, your phone
lets you know by beeping, displaying
a message, or both. If you receive
more than one message, your phone
shows the number of messages
received.
Delete a Java SMS
Selecting Delete displays the
confirmation message Permanently
delete SMS? (where SMS is the title
of the application).
Select OK to confirm that you wish
to delete the Java SMS message.
The screen will display the
confirmation message Deleted SMS.
Saving a Java SMS
Save voice mailbox number
Saving a Java SMS will save the
message to the Inbox. When you
select Save, the confirmation note
Saved to Inbox appears on the
screen. You can go into the Inbox at
a later time and use the message.
Your wireless provider may have
already saved your voice mailbox
number to your phone. If so, the
number will appear in the display in
step 2. Press OK to leave the number
unchanged.
1. At the standby screen, select
Menu > Messages > Voice
messages > Voice mailbox
number, and press Select.
View details of a Java SMS
When you select View details, you
will be able to view the details of the
Java application that the SMS has
delivered.
2. If the box is empty, enter the voice
mailbox area code and number.
The details available to view are
Title, Vendor, Suite, Number, Version,
URL, and Parameters.
Voice mailbox number appears in
the display.
3. Press OK.
Copyright 2004 Nokia. All rights reserved.
23
©
Download from Www.Somanuals.com. All Manuals Search And Download.
M e s s a g e s ( M e n u 1 )
location. Dialling codes instruct the
receiving system to pause, wait,
bypass, or accept the numbers that
follow them in the dialling string.
Call and set up your
voice mail
1. Once you have saved the voice
mailbox number, press and hold 1.
Note: Voice mail services
vary by service provider. The
following instructions are
examples of common
operations. Please check with
your service provider for
specific instructions for using
your voice mail service.
2. When you connect to voice mail
and the prerecorded greeting
begins, follow the service’s
automated instructions to set up
your voice mail.
Listen to your voice
messages
Once you have set up voice mail, you
can dial the number in one of four
ways:
Write down voice mailbox
number and process
1. Write down your voice mailbox
number.
• Dial the number using the keypad.
2. Call and check your voice mail as
you normally would.
• Press and hold 1.
• Press Listen if there is a
notification message in the
display.
3. Write down your interaction with
the recorded prompts
step-by-step. Keep in mind that
each voice mail service may vary.
However, it should look
• At the standby screen, select
Menu > Messages > Voice
messages > Listen to voice
messages, and press Select.
something like this:
Dial 2145551212, pause 5
seconds, press 1, pause 2
seconds, press 1234, and press *.
Once you connect and the
prerecorded greeting begins,
follow the automated
instructions to listen to your
voice messages.
Be precise; you will need this
Insert dialling codes
Automate voice mail
Press * repeatedly to cycle through
dialling codes. Once the desired code
appears in the display, pause briefly
and the code is inserted into the
dialling string.
You can insert special characters
called dialling codes into phone
numbers such as voice mail, and
save the number to a speed dial
24
Copyright 2004 Nokia. All rights reserved.
©
Download from Www.Somanuals.com. All Manuals Search And Download.
M e s s a g e s ( M e n u 1 )
The following dialling codes are
available:
5. Enter any remaining pauses or
other information that allows
you to listen to your messages,
and press OK.
Dialling
Indicates...
code
6. Enter a name (such as voice mail),
and press OK.
Bypasses a set of
instructions.
*
To dial and listen to your voice mail,
just press and hold the assigned
speed dialling key at the standby
screen.
+
p
International access.
Pauses for 2.5 seconds
before sending any
numbers that follow.
■ Picture messages
Waits for you to press
the Send key before
sending the numbers or
codes that follow.
Picture messaging is a network
service. If your wireless service
provider supports this feature, your
phone comes with five preloaded
pictures. You can, however,
w
Set up voice mail with
dialling codes
1. At the standby screen, press
Contacts > Speed dials > Select.
over-write any of the five pictures
that come with your phone. Pictures
can be attached to a message and
sent using text messaging to
compatible phones or PCs. Picture
messages behave the same as text
messages, but pictures take up more
space than text. Pictures are stored
in the Templates folder at Menu >
Messages >Text messages >
2. Scroll to an empty speed dialling
slot, and press Assign.
3. Enter your voice mailbox number,
including the area code.
4. Refer to dialling codes and enter
any codes as necessary using the
information that you saved from
Templates.
Note: Picture message
function can be used only if it
is supported by your network
operator or service provider.
Only compatible devices that
offer picture message
For example, if you pause for 5
seconds after connecting to voice
mail, enter p twice after the voice
mailbox number, for example,
2145551212pp.
features can receive and
display picture messages.
Copyright 2004 Nokia. All rights reserved.
25
©
Download from Www.Somanuals.com. All Manuals Search And Download.
M e s s a g e s ( M e n u 1 )
Copyright protections may prevent
some images, ringing tones, and
other content from being copied,
modified, transferred, or forwarded.
9. Press Options, scroll to Send, and
press Select.
Note: Picture images are not
saved in Sent items.
Note: Pictures can only be
received via SMS.
Write and send
When a picture is added to a text
message, the message converts to
picture message. The message
counter in the upper right of your
display shows the characters
available for you to type in.
Preview/Change/Delete
1. After a picture has been inserted
into your message, press Options
at the message edit screen.
2. Select one of the following
options.
1. At the start screen, selectMenu >
Messages > Text messages >
Create message > Text > Edit
message, and press Select.
Preview — Previews the inserted
message before sending. Press
Back to return to the list of
options.
2. Write a message using the
keypad (or enter nothing if you
choose to just send a picture),
and press Options.
Change picture — Takes you back
to the picture list. Scroll to
highlight a new picture, press
View, then Insert to replace the
previous picture in your message.
3. Select Insert picture.
4. Scroll down through the pictures,
and press View.
Delete picture — Press OK to
delete the picture from your
message, or press Back to return
to the list of options.
5. Press Insert to insert the picture
into your message, otherwise,
press Back, scroll to another
picture, and press View again:
6. To send the picture message,
press Options, scroll to Send, and
press Select.
View a picture message
When you receive a picture message,
the message icon ( ) appears in
the display.
7. Select Add number.
8. Enter the phone number for your
recipient, or press Search to
retrieve a number from the
contacts list, and press OK.
1. Press Show to view the picture
message, or press Exit to move it
to your inbox.
26
Copyright 2004 Nokia. All rights reserved.
©
Download from Www.Somanuals.com. All Manuals Search And Download.
M e s s a g e s ( M e n u 1 )
2. If you have more than one picture
message, scroll to the message of
your choice, and press Select to
view the message.
2. Scroll to Save message > Sent
items, Templates, Archive, or a
folder you have created on your
own, and press Select.
When you have unopened picture
Save the message to another
folder
1. While viewing a message, press
messages in your inbox,
is
shown in the upper left corner of
the standby screen as a reminder.
3. Scroll to view the whole picture if
necessary.
Options > Save message > Select.
2. Scroll to the destination folder,
4. Once you are finished, press Back
to move the picture message to
the Inbox or press Options for
other choices such as Reply or
Forward.
and press Select.
View saved messages
1. At the standby screen, select
Menu > Messages > Text
messages.
If you would like to save the picture
to your Templates folder for later
use, press Options > Save picture >
Select. You can enter a title for the
picture, and press OK.
2. Scroll to the folder containing
the message you wish to view,
and press Select.
3. Once the folder opens, scroll to
the message you wish to view,
and press Select.
Note: If your templates
folder is full of pictures, scroll
to the picture you would like
to replace and press Select.
Inbox folder
Messages are automatically stored
in the inbox after they have been
read or if you press Back when (#)
message(s) received appears on the
standby screen.
■ Message folders
Save messages to folders
You can save drafts of messages or
received messages to an existing
folder or to a folder that you have
created.
Sent items folder
Messages that you have sent and
messages that you have created but
have not sent are automatically
stored in the sent items folder.
1. Open the received message or
create a new message, and press
Options.
Copyright 2004 Nokia. All rights reserved.
27
©
Download from Www.Somanuals.com. All Manuals Search And Download.
M e s s a g e s ( M e n u 1 )
Delete a folder
Archive folder
Only folders created in My folders
can be deleted. The Inbox, Sent
items, Archive, and Templates
folders are protected. When you
delete a folder, all messages in the
folder are also deleted.
Store messages that have been read
in the Archive folder.
Templates folder
Pictures and prewritten templates
are stored in the Templates folder.
Preloaded templates can be edited
and personalised.
1. At the standby screen, select
Menu > Messages > Text
messages > My folders, and press
Select.
My folders
Keep your messages organised by
creating custom folders and saving
some of your messages there.
2. Scroll to the folder you wish to
remove and select Options >
Delete folder, and press Select.
3. Press OK to delete or Back to exit.
Add a folder
1. At the standby screen, select
Menu > Messages > Text
messages > My folders > Options
> Add folder, and press Select.
■ Delete messages
If your message memory is full and
you have more messages waiting at
the network,
blinks on the
2. Enter a name for the new folder,
standby screen. You can do the
following:
and press OK.
• Read some of the unread
messages, and delete them.
Rename a folder
1. At the standby screen, select Menu
> Messages > Text messages >
My folders, and press Select.
• Delete messages from some of
your folders.
2. Any folders that you have created
appear in the display. Scroll to
the folder you wish to rename,
and press Options.
A single message
To delete a single message, you need
to open it first.
3. Scroll to Rename folder, and
1. At the standby screen, select
Menu > Messages > Text
press Select.
4. Press and hold Clear to delete the
existing entry, then enter the new
name for the folder, and press OK
to confirm or Back to exit.
messages, and press Select.
28
Copyright 2004 Nokia. All rights reserved.
©
Download from Www.Somanuals.com. All Manuals Search And Download.
M e s s a g e s ( M e n u 1 )
2. Scroll to the folder containing
the message you wish to delete
and press Select.
3. Press OK to empty the folder.
Note:Onlyfolderscreated
in My folders can be
deleted. The Inbox, Sent
items, Archive, and
Templates folders are
protected. When you
delete a folder, all
3. Scroll to the message you wish to
delete, and press Select.
4. Press Options > Delete > Select.
5. Press OK to delete the message or
Back to exit.
messages in the folder are
also deleted.
All messages in a folder
1. At the standby screen, select
Menu > Messages > Text
messages > Delete messages.
2. Scroll to the folder containing
the messages you wish to delete
and press Select.
All — Deletes all messages in all
of the folders.
All read — Deletes any messages
which have been read in all of the
folders.
All unread — Deletes any
messages which have not been
read in all of the folders.
Inbox — Deletes all messages
from the Inbox folder.
Sent items — Deletes all
messages from the Sent items
folder.
Archive — Deletes all messages
from the Archive folder.
Copyright 2004 Nokia. All rights reserved.
29
©
Download from Www.Somanuals.com. All Manuals Search And Download.
C a l l r e g i s t e r ( M e n u 2 )
6. Call register (Menu 2)
Call register stores information
about the last 20 missed, 20
received, or 20 dialled calls. It also
adds the total duration of all calls.
When the number of calls exceed
the maximum, the most recent call
replaces the oldest.
Missed calls are calls that were
never answered.
1. If (#) missed call(s) appears in the
display, press List.
2. When the phone number appears
in the display, press Options.
3. Scroll to an option, and press
Whether viewing missed, received,
or dialled calls, the menu options are
the same:
Select to activate the option.
OR
1. At the standby screen, select
Menu > Call register > Missed
calls, and press Select.
Time of call — Display the date and
time of the call.
Send message — Send a message to
the number.
2. Scroll to a name or number, and
press Options.
View number — Display the number.
3. Scroll to an option, and press
Select to view or activate the
option.
Use number — Edit the number and
associate a name with the number.
Save — Enter a name for the number
and save it to your contacts list.
■ View received calls
Received calls are calls that have
been answered.
Add to contact — Add the number to
an existing entry in your contacts
list, if the number is not associated
with a name.
1. At the standby screen, select
Menu > Call register > Received
calls, and press Select.
Delete — Clear the number from
memory.
2. Scroll to a name or number, and
Call — Call the number.
press Options.
3. Scroll to an option, and press
Select to view or activate the
option.
■ View missed calls
Note: The missed calls feature
does not function when your
phone is switched off.
30
Copyright 2004 Nokia. All rights reserved.
©
Download from Www.Somanuals.com. All Manuals Search And Download.
C a l l r e g i s t e r ( M e n u 2 )
1. At the standby screen, select
Menu > Call register > Delete
recent call lists, and press Select.
■ Dialled numbers
Dialled calls are previous numbers
you have dialled from your phone:
2. Scroll to the call type you would
like to clear (All, Missed, Received
or Dialled), and press Select.
1. At the standby screen, press the
Send key.
OR
At the standby screen, select
Menu > Call register > Dialled
numbers, and press Select.
■ Duration of calls
Note: The actual time
invoiced for calls and services
by your service provider may
vary, depending on network
features, rounding off for
billing, taxes, and so forth.
2. Scroll to a name or number, and
press Options.
3. Scroll to an option, and press
Select to view or activate the
option.
Last call
At the standby screen, select Menu >
Call register > Call duration > Last
call duration for more information.
Time of call
You can make or receive up to five
calls to or from the same number
and view the time each call
occurred. Your clock must be set for
this feature to work accurately.
Dialled calls
At the standby screen, select Menu >
Call register > Call duration >
Duration of dialled calls > Details for
more information.
1. While viewing a missed, received,
or dialled call, press Options >
Time of call, and press Select.
2. Press the Scroll downkey to view
the most recent call times from
this number; press Back to return
to the options list.
Received calls
At the standby screen, select Menu >
Call register > Call duration >
Duration of received calls > Details
for more information.
■ Delete call registers
You can delete any missed, dialled,
or received calls from phone
memory.
Copyright 2004 Nokia. All rights reserved.
31
©
Download from Www.Somanuals.com. All Manuals Search And Download.
C a l l r e g i s t e r ( M e n u 2 )
Note: The actual time
All calls
invoiced for calls and services
by your service provider may
vary, depending on network
features, rounding off for
billing, taxes, and so forth.
At the standby screen, select Menu >
Call register > Call duration >
Duration of all calls for more
information.
1. At the standby screen, select
Menu > Call register > Data/fax
calls and press Select.
Life timer
At the standby screen, select Menu >
Call register > Call duration > Life
timer.
2. Scroll to one of the following
options:
Note: Some timers, including
the life timer, may be reset
during service or software
upgrades.
Last sent data/fax — View the
size (kB) of the last sent data/fax
call.
Last received data/fax — View the
size (kB) of the last received
data/fax call.
Clear timers
At the standby screen, select Menu >
Call register > Call duration > Clear
timers. Enter your security code, and
press OK.
All sent data/fax — View the size
(kB) of all sent data and fax calls.
All received data/fax — View the
size (kB) of all received data and
fax calls.
■ Duration of data/fax
calls
Duration of last data/fax call —
View the duration time of the last
data or fax call.
Data/fax calls are a Network Service.
for more information. If your
wireless service provider supports
this feature, you can view the size or
duration of sent or received data and
fax calls.
Duration of all data/fax calls —
View the duration time of all
calls.
Clear all data/fax registers —
Press OK > Yes to clear all
data/fax registers.
32
Copyright 2004 Nokia. All rights reserved.
©
Download from Www.Somanuals.com. All Manuals Search And Download.
P r o f i l e s ( M e n u 3 )
7. Profiles (Menu 3)
Profiles define how your phone
reacts when you receive a call or
message, how your keypad sounds
when you press a key, and more.
Ringing options, keypad tones, and
other settings for each of the
available profiles can be left at their
default setting, or personalised to
suit your needs. The following
profiles are available: General,
Silent, Meeting, Outdoor, and Pager.
4. Scroll to the option you want to
personalise (Incoming call alert,
Ringing tone, Ringing volume,
Vibrating alert, Light alert,
Message alert tone, Keypad
tones, Warning tones, Alert for, or
Profile name), and press Select.
Note: You cannotrename the
General profile.
■ Set a timed profile
Timed profiles can be used to
Profiles are also available for
enhancements such as a headset
and car kit. See "Enhancement
prevent missed calls. For example,
suppose you attend an event that
requires your phone be set to Silent
before the event starts, but you
forget to return it to General until
long after the event. A timed profile
can prevent missed calls by
■ Activate
1. At the standby screen, select
Menu > Profiles and press Select.
returning your phone to the default
profile at a time you specify.
2. Select the profile of your choice.
3. Select Activate.
Note: Timed profiles can be
set up to 24 hours in advance.
■ Personalise a profile
You can personalise any of the
profiles a variety of ways.
1. At the standby screen, select
Menu > Profiles, and press Select.
2. Scroll to the profile you wish to
activate and set for timed
1. At the standby screen, select
Menu > Profiles and press Select.
expiration and press Select.
2. Select the profile you wish to
personalise.
3. Select Timed.
4. Enter the time for the profile to
3. Select Personalise.
expire, and press OK.
Copyright 2004 Nokia. All rights reserved.
33
©
Download from Www.Somanuals.com. All Manuals Search And Download.
S e t t i n g s ( M e n u 4 )
8. Settings (Menu 4)
Use this menu to set or change the
time and date settings, call settings,
phone settings, tone settings,
enhancement settings, security
settings, network settings and to
restore the factory settings.
Speed dialling
You can activate or deactivate speed
Auto-update of service
Your phone is capable of receiving
updates to wireless services sent to
your phone by your service provider.
■ Call settings
Anykey answer
At the standby screen, select Menu >
Settings > Call settings > Automatic
update of service > On or Off and
press Select.
Anykey answer allows you to answer
an incoming call by briefly pressing
any key except the power key, Right
selection key, or End key.
At the standby screen, select Menu >
Settings > Call settings > Anykey
answer and press Select > On or Off
and press Select.
Calling card
If you use a calling card for long
distance calls, you can save the
calling card numbers in your phone.
Your phone can store up to four
calling cards.
Automatic redial
Occasionally, your network may
experience heavy traffic, resulting in
a “fast” busy signal when you dial.
With automatic redial activated,
your phone redials the number, and
notifies you once the network is
available.
Save information
1. At the standby screen, select
Menu > Settings > Call settings >
Calling card and press Select.
2. Enter your security code and
press OK.
At the standby screen, select Menu >
Settings > Call settings > Automatic
redial > On or Off and press Select.
3. Scroll to one of the four memory
locations and press Options >
Edit > OK > Dialling sequence
and press Select.
34
Copyright 2004 Nokia. All rights reserved.
©
Download from Www.Somanuals.com. All Manuals Search And Download.
S e t t i n g s ( M e n u 4 )
4. Scroll to one of the following
2. Enter your security code, and
sequence types and press Select:
Access no.+ phone no.+ card no.
— Dial access number, phone
number, then card number (+ PIN
if required)
3. Scroll to the calling card of your
choice, select Options > Select >
OK.
Access no.+ card no.+ phone no.
— Dial access number, card
number (+ PIN if required), then
phone number
4. Press the End key to return to the
standby screen; then enter the
phone number, including any
prefix (such as 0 or 1), that your
calling card may require when
you make a calling card call.
Prefix+ phone no.+ card no. —
Dial the prefix (numbers that
must precede the phone number)
and phone number you want to
dial, thencardnumber(+PINif
required)
See your calling card for
instructions.
5. Press and hold the Send key for a
few seconds until Card call is
displayed.
5. Enter the required information
(access number or prefix and card
number), and press OK to confirm
your entries.
6. When you hear the tone or
system message, press OK.
6. Scroll to Card name, and press
Data/fax calls
Data or fax calls is a Network
Service. See "Network services" on
page viii for more information.
Select.
7. Enter the card name, and press
OK.
Note: Contact your calling
card company for more
information.
If your wireless service provider
supports this feature, then you can
set up the phone to send or receive
data or fax calls when a terminal,
such as a PDA or PC, is connected.
Make calls
After you have saved your calling
card information in your phone, you
can make a call using your calling
card.
For better performance during data
calls, place the phone on a
stationary surface. Do not move the
phone by holding it in your hand
during a data call.
1. At the standby screen, select
Menu > Settings > Call settings >
Calling card and press Select.
Copyright 2004 Nokia. All rights reserved.
35
©
Download from Www.Somanuals.com. All Manuals Search And Download.
S e t t i n g s ( M e n u 4 )
Note: For more information
Call Summary
Your phone can display the time
spent on a call when you hang up.
on connectivity, refer to the
PC/PDA Connectivity Guide.
The PC/PDA Connectivity
Guide can be downloaded
from the Nokia website at
At the standby screen, select Menu >
Settings > Call settings > Call
summary > On or Off.
1. At the standby screen, select
Menu > Settings > Call settings >
Data/fax calls > Incoming
data/fax call > Normal, Data calls
only, or Fax calls only and press
Select:
■ Phone settings
Phone language
1. At the standby screen, select
Menu > Settings > Phone
settings > Phone language.
Normal — The phone receives
incoming calls as usual.
2. Scroll to the language of your
choice and press Select.
Data calls only — The phone
receives only data calls.
The language setting affects the
time and date formats of the clock,
alarm clock, and calendar.
Fax calls only — The phone
receives only fax calls.
2. When you are finished receiving
the fax or data call, repeat Steps
1 and 2 and select Normal.
Automatic keyguard
You can set the keypad of your
phone to lock automatically after a
preset time delay.
Data transfer
You can view the transmission speed
when sending or receiving data or
fax calls.
1. At the standby screen, select
Menu > Settings > Phone
settings > Automatic keyguard >
On or Off.
At the standby screen, select Menu >
Settings > Call settings > Data/fax
calls > Data rate display > Graphic or
Off and press Select.
2. If you selected On, Set delay
appears in the display.
3. Enter the delay (in minutes and
seconds) and press OK.
36
Copyright 2004 Nokia. All rights reserved.
©
Download from Www.Somanuals.com. All Manuals Search And Download.
S e t t i n g s ( M e n u 4 )
Note: When keyguard is on,
it may be possible to dial the
emergency number
Off — Used to turn off tones. No
tones are sent when you press a
key.
programmed into your
Set length
phone. Key in the emergency
number and press the Send
key. The number is displayed
only after you have keyed in
its last digit.
You can also specify DTMF tone
length when using the Fixed option.
At the standby screen, select Menu >
Settings > Phone settings > DTMF
tones > DTMF tone length > Short
(0.1 seconds) or Long (0.5 seconds).
DTMF tones
DTMF tones, are the tones that
sound when you press the keys on
your phone’s keypad. You can use
DTMF tones for many automated
dial-up services such as banking and
airlines, or for entering your voice
mailbox number and password.
Welcome note
You can write a welcome note which
briefly appears on the display screen
whenever you switch your phone on.
Note: Predictive text input is
not available for entering
Welcome note text.
DTMF tones are sent during an active
call. You can send them manually
from your phone’s keypad, or send
them automatically by saving them
in your phone.
1. At the standby screen, select
Menu > Settings > Phone
settings > Welcome note.
2. Enter a note (up to 44
characters).
Set type
1. At the standby screen, select
Menu > Settings > Phone
settings > DTMF tones > Manual
DTMF tones.
Press the * key to display and
select from available special
characters.
3. When you are finished, select
2. Select one of the following
options:
Options > Save.
OR
Continuous — The tone sounds for
as long as you press and hold a key.
Select Delete if you want to
delete the previous text and
begin creating another welcome
note.
Fixed — Used to send tones of the
duration you specify in the DTMF
tone length option.
Copyright 2004 Nokia. All rights reserved.
37
©
Download from Www.Somanuals.com. All Manuals Search And Download.
S e t t i n g s ( M e n u 4 )
2. Use the Scroll up and Scroll down
keys to adjust the brightness
level to your preference.
Banner
Banner is a Network Service. See
more information.
3. Press OK to accept your settings.
■ Time and date settings
Time
If your wireless service provider
supports this feature, then you can
choose whether the display shows
the operator logo when the phone is
in the idle state.
Show/hide the clock
At the standby screen, select Menu >
Settings > Phone settings > Banner
> Default or Personalise and press
Select.
At the standby screen, select Menu >
Settings > Time and date settings >
Clock > Show clock or Hide clock,
and press Select.
Set the time
Help text
1. At the standby screen, select
Menu > Settings > Time and date
settings > Clock > Set the time
and press Select.
Your phone displays brief
descriptions for most menu items.
When you arrive at a feature or
menu, pause for about 10 seconds
and wait for the help text to display.
Use the scroll keys to page through
the full help text, if necessary.
2. Enter the time (in hh:mm format)
and press OK.
3. Scroll to am or pm, and press
Select (this option displays only
when 12-hour format is in use).
The default setting for help text is
on. However, you can turn help text
on or off.
Change the format
At the standby screen, select Menu >
Settings > Phone settings > Help
text activation > On or Off.
At the standby screen, select Menu >
Settings > Time and date settings >
Clock > Time format > 24-hour or
12-hour, and press Select.
Display brightness
You can change the brightness of
your phone display.
Date
Show/hide the date
1. At the standby screen, select
Menu > Settings > Phone
settings > Display brightness, and
press Select.
At the standby screen, select Menu >
Settings > Time and date settings >
Date > Show date or Hide date, and
press Select.
38
Copyright 2004 Nokia. All rights reserved.
©
Download from Www.Somanuals.com. All Manuals Search And Download.
S e t t i n g s ( M e n u 4 )
If you use the Auto-update of date &
time option while outside your
digital network, you may be
Set the date
1. At the standby screen, select
Menu > Settings > Time and date
settings > Date > Set the date
and press Select.
prompted to enter the time
manually. Network time will replace
the time and date when you re-enter
your digital network.
2. Enter the date, and press OK.
Change the date format
If your battery has been removed or
has discharged outside the digital
network, you may be prompted to
enter the time manually (once the
battery is replaced/recharged, and
you are still outside of the digital
network).
1. At the standby screen, select
Menu > Settings > Time and date
settings > Date and press Select.
2. Scroll to the Date separator, and
press Select.
3. Scroll to the separator of your
choice and press Select.
■ Tone settings
4. With Date on the display, press
Select and scroll to Date format,
and press Select.
From this menu, you can adjust the
ringing volume, keypad tones, and
other tone settings for the currently
5. Scroll to the format of your
choice, and press Select.
Set the auto-update of date
and time
Auto-update is a network service.
■ Enhancement settings
The enhancement settings menu is
shown only if the phone is or has
been connected to a compatible
enhancement.
If your wireless service provider
supports this feature, then you can
allow the digital network to set the
clock, which is useful when you are
out of your home area, for instance
when you have traveled to another
network or time zone.
At the standby screen, select Menu >
Settings > Enhancement settings >
Headset, Handsfree, and press
Select.
Handsfree
Scroll to the option of your choice
and press Select to enter the option’s
submenu and modify its settings.
At the standby screen, select Menu >
Settings > Time and date settings >
Auto-update of date & time > On,
Confirm first, or Off, and press Select.
Copyright 2004 Nokia. All rights reserved.
39
©
Download from Www.Somanuals.com. All Manuals Search And Download.
S e t t i n g s ( M e n u 4 )
Default profile — Choose the profile
you wish to be automatically
activated when your phone is
connected to a car kit.
Lights — Choose to keep the phone
lights always on, or to shut off
automatically after several seconds.
Select On or Automatic.
Automatic answer — Calls are
answered automatically after one
ring when a car kit is connected.
Scroll to On or Off, and press Select.
■ Security settings
Call restrictions
Lights — Choose to keep the phone
lights always on, or to shut off
automatically after several seconds.
Scroll to On or Automatic, and press
Select.
Call restriction is a network service.
If your wireless service providers
supports this feature, then you can
restrict the calls your phone can
make and receive. When calls are
restricted, calls still may be possible
to the official emergency number
programmed into your phone.
Headset
Scroll to the option of your choice,
press Select to enter the submenu
and modify its settings.
1. At the standby screen, select
Menu > Settings > Security
settings > Call restrictions, and
press Select.
Default profile — Choose the profile
you wish to be automatically
activated when a headset is
connected.
2. Enter the security code and press
OK.
Automatic answer — Calls are
answered automatically after one
ring when a headset is connected.
Scroll to On or Off, and press Select.
3. Scroll through the types of calls
you can restrict, and press Select:
Restrict outgoing calls — Calls
cannot be made.
Charger
Scroll to the option of your choice,
and press Select to enter the
submenu and modify its settings.
Restrict incoming calls — Calls
cannot be received.
4. Scroll to an option (Select, Add
restriction) and press Select.
Default profile — Choose the profile
you wish to be automatically
activated when a charger is
connected.
40
Copyright 2004 Nokia. All rights reserved.
©
Download from Www.Somanuals.com. All Manuals Search And Download.
S e t t i n g s ( M e n u 4 )
1. At the standby screen, select
Menu > Settings > Security
settings > Access codes > Phone
lock and press Select.
Access codes
Note: Avoid using codes
similar to emergency
numbers such as 100 or 101
to prevent accidental dialling
of the emergency number.
2. Enter the lock code and press OK.
3. Scroll to one of the following
options and press Select:
The lock code and security
code control access to
On immediately turns on the
features such as the security
level and are supplied with
the phone. The preset lock
code is 1234 and preset
security code is 12345. Once
you change the code, keep
the new code secret and in a
safe place separate from your
phone.
phone lock feature.
Off immediately turns off the
phone lock feature.
If you selected On, you must enter
your lock code before the phone will
function normally. Once the lock
code has been accepted, your phone
functions normally.
Important: Call not allowed
is displayed if you attempt to
place a call while the phone
is locked.
Note: If you enter the wrong
code five times in succession,
you will not be able to enter a
code for five minutes, even if
you power off the phone
To answer a call with phone lock on,
between incorrect entries.
press Answer or the Send key.
Phone lock
Allowed phone number when
phone locked
When phone lock is on, the only
outgoing calls that can be made are
to the following numbers:
The phone lock feature protects your
phone from unauthorised outgoing
calls or unauthorised access to
information stored in the phone.
When phone lock is activated, Phone
locked is displayed each time you
turn your phone on or off. The preset
phone lock code is 1234.
• The emergency number
programmed into your phone (for
example, 100 or 101).
• The number stored in the Allowed
number when lock active
location.
When the phone is locked, calls still
may be possible to the official
emergency number programmed
into your phone.
Copyright 2004 Nokia. All rights reserved.
41
©
Download from Www.Somanuals.com. All Manuals Search And Download.
S e t t i n g s ( M e n u 4 )
1. At the standby screen, select
Menu > Settings > Security
settings > Access codes >
Allowed number when lock active
and press Select.
2. Enter the current security code
(default is 12345), and press OK.
3. Enter the new security code (up
to 10 characters) and press OK.
4. Reenter the new security code for
2. Enter the lock code and press OK.
verification, and press OK.
3. Enter the phone number or press
Search and recall the number
from the phone book, and press
OK.
Note: When you change
your security code, make
sure you store it in a safe
place, away from your
phone. Avoid entering
access codes similar to
emergency numbers to
prevent accidental
Change the lock code
1. At the standby screen, select
Menu > Settings > Security
settings > Access codes > Change
lock code, and press Select.
emergency calls.
2. Enter the current lock code
Voice privacy
(default is 1234), and press OK.
Voice privacy is a network service.
If your wireless service provider
supports this feature, the voice
privacy feature protects the privacy
of your current phone conversation
from other callers placing phone
calls on your same network.
3. Enter the new lock code (up to 10
characters) and press OK.
4. Reenter the new lock code for
verification, and press OK.
Note: When you change
your lock code, make sure
you store it in a safe
place, away from your
phone. Avoid entering
access codes similar to
emergency numbers to
prevent accidental
At the standby screen, select Menu >
Settings > Security settings > Voice
privacy > On or Off and press Select.
■ Network
emergency calls.
The Network menu allows you to
personalise the way your phone
chooses a network in which to
operate while you are within or
outside of your primary or home
system. Your phone is set to search
Change the security code
1. At the standby screen, select
Menu > Settings > Security
settings > Access codes > Change
security code, and press Select.
42
Copyright 2004 Nokia. All rights reserved.
©
Download from Www.Somanuals.com. All Manuals Search And Download.
S e t t i n g s ( M e n u 4 )
for the most cost-effective network.
If your phone can’t find a preferred
network, it selects a network
automatically based on the option
you choose in the Network.
Divert if not answered — Divert
incoming calls to another
number if you are unable to
answer. You can set a delay
before diverting takes place.
Divert if out of reach — Divert
incoming calls when your phone
is off.
■ Network services
The following features are network
services. See "Network services" on
Cancel all diverts — Cancel any
call diverting options you have set.
3. Select Activate.
Call divert
4. Enter the number to which your
calls, data, or other information
will be diverted and press OK.
Call divert tells your network to
redirect incoming calls to another
number. Call divert is a network
service and may not work the same
in all networks, so contact your
wireless provider for availability.
Cancel
At the standby screen, select Menu >
Settings > Network services > Call
divert > Cancel all diverts and press
Select.
Activate
Note: This is a network
service. All options listed may
not appear in the display.
Contact your wireless
provider for more information.
Note: Cancel all diverts may
affect your ability to receive
voice mail messages. Contact
your wireless provider for
specific details.
1. At the standby screen, select
Menu > Settings > Network
services > Call divert, and press
Select.
Call waiting
If your wireless provider supports
this feature, call waiting notifies you
of an incoming call even while you
are in a call. You can then accept,
reject, or ignore the incoming call.
2. Select one of the following
options:
Divert all calls — Diverts all calls
to the number you specify.
1. During a call, press Answer or the
Send key to answer the waiting
call.
Divert if busy — Divert incoming
calls when you are in a call.
The first call is put on hold.
Copyright 2004 Nokia. All rights reserved.
43
©
Download from Www.Somanuals.com. All Manuals Search And Download.
S e t t i n g s ( M e n u 4 )
2. Press the End key to end the
■ Restore factory settings
You can reset some of the menu
settings to their original values. Data
that you have entered or
active call.
Store a feature code
1. In the standby mode, select Menu
> Settings > Network services >
Network feature setting.
downloaded is not deleted, for
example, entries in your contacts list
are not affected.
2. Enter the feature code from your
service provider (for example,
*301), and press OK.
1. At the standby screen, select
Menu > Settings > Restore
factory settings and press Select.
3. Select the type of diverting that
matches the feature code you
entered (for example, Call
diverting).
2. Enter the security code (the
default security code is 12345)
and press OK.
The activated feature code is now
stored in your phone, and you are
returned to the Feature code
field. Continue entering other
feature codes (for example, *301),
or press the End key to return to
the standby mode screen.
Note: Once you enter a
network feature code
successfully the feature
becomes visible in the
Network services menu.
44
Copyright 2004 Nokia. All rights reserved.
©
Download from Www.Somanuals.com. All Manuals Search And Download.
V o i c e ( M e n u 5 )
9. Voice (Menu 5)
1. At the standby screen, use the
Scroll down key to enter the
contacts list.
■ Voice dialling
You can dial up to 25 stored numbers
using voice dialling.
2. Highlight the contact you want
to assign a voice tag, press
Details > Options > Add voice tag
and press Select.
Before using voice tags, note that:
• Voice tags are not language
dependent. They are dependent
on the speaker’s voice.
3. Press Start, then speak clearly
• You must say the name exactly as
you said it when you recorded it.
into the microphone.
Note: Do not press Quit
unless you want to cancel the
recording.
• Voice tags are sensitive to
background noise. Record voice
tags and use them in a quiet
environment.
The phone automatically stops
recording, saves, and replays the
• Very short names are not
accepted. Use long names, and
avoid similar names for different
numbers.
voice tag. The
icon appears next
to the phone numbers which have
voice tags assigned.
If recording is not successful, your
phone displays Voice system error.
Press Options > Add voice tag, and
repeat Step 3.
Note: Using voice tags may
be difficult in a noisy
environment or during an
emergency, so you should not
rely solely upon voice dialling
in all circumstances.
Dial a number
1. Press and hold Contacts.
2. When you hear several beeps and
Speak now appears, release the
key.
Assign a voice tag to an
entry
Before you can use voice dialling,
you must first assign a voice tag to
the number.
Copyright 2004 Nokia. All rights reserved.
45
©
Download from Www.Somanuals.com. All Manuals Search And Download.
V o i c e ( M e n u 5 )
3. Pronounce the voice tag clearly
into the microphone.
Delete
1. Press Menu > Voice > Voice tags
> Select.
When the phone finds the voice
tag, Found appears, and the
phone automatically dials the
number. If the phone does not
locate a number or recognise the
voice tag, No match found
appears.
2. Scroll to the name with the voice
tag you want to erase.
3. Press Options > Delete > Select.
Delete voice tag? appears.
4. Press OK to erase the voice tag.
■ Voice commands
You can set as many as five voice
commands, which allow hands-free
operation of certain phone features.
Voice tags
After you have associated a voice
tag to a contact, you can choose one
of the following options:
Play back
Add a voice tag
Before using voice commands, you
must first add a voice tag to the
phone function.
1. Press Menu > Voice > Voice tags
> Select.
2. Scroll to the name with the voice
tag you want to hear.
1. At the standby screen, select
Menu > Voice > Voice commands,
and press Select.
3. Press Options > Playback >
Select.
2. Scroll to the phone function you
wish to tag (Profiles, Voice
Modify
1. Press Menu > Voice > Voice tags
mailbox, Voice recorder or Call
register), and press Select.
> Select.
2. Scroll to the name with the voice
tag you want to change.
3. If necessary, scroll to an option
associated with that function
and press Select.
3. Press Options > Change > Select.
4. Press Start, then speak clearly
into the microphone. The phone
repeats your voice tag, and Voice
tag saved appears.
4. Press Options > Add command >
Select.
5. Press Start, and speak the voice
tag clearly into the microphone.
Note: Do not press Quit
unless you want to cancel the
recording.
46
Copyright 2004 Nokia. All rights reserved.
©
Download from Www.Somanuals.com. All Manuals Search And Download.
V o i c e ( M e n u 5 )
The phone replays and then saves
the recorded tag. The icon
appears next to commands which
have voice tags assigned.
available time is 60 seconds if no
memos have been stored. The
maximum length of a recording
depends on how much memory
remains available.
Activate a voice command
Record speech or sound
1. At the standby screen, select
Menu > Voice > Voice recorder >
Record >Select.
After you have associated a voice
tag with a phone function, you can
issue a command by speaking the
voice tag.
1. Press and hold Contacts.
2. After the recorder start tone is
heard, begin recording speech or
sound.
2. When Please speak now appears,
pronounce the voice tag clearly
into the microphone.
3. When you are finished recording,
press Stop.
When the phone finds the voice tag,
Found appears, and the phone plays
the recognised voice tag through the
earpiece. The function you requested
is activated.
4. Type in a name for the recording
and press OK. The recording is
saved to the Recording List.
Options
Options
After you have associated a voice
tag to a command, you can choose
one of the following options:
After you have saved the recording
to the Recordings list, highlight the
recording and choose one of the
following options:
• Select Playback to listen to the
• Select Playback to listen to the
voice command tag.
recording using the earpiece.
• Select Change to change the
• Select Delete to erase the
voice command.
recording.
• Select Delete to erase the voice
• Select Edit title to rename the
command tag.
recording.
• Select Add alarm to add an alarm
■ Voice recorder
to the recording.
This feature allows you to record
speech or sound with your phone
and listen to them later. The total
Copyright 2004 Nokia. All rights reserved.
47
©
Download from Www.Somanuals.com. All Manuals Search And Download.
O r g a n i s e r ( M e n u 6 )
10. Organiser (Menu 6)
Your phone contains features to help
organise your everyday life, including
an alarm clock, calendar, calculator,
countdown timer, and stopwatch.
If an alarm has previously
been set
1. At the standby screen, select
Menu > Organiser > Alarm clock
> On and press Select.
■ The alarm clock
2. Enter the time for the alarm in
hh:mm format and press OK.
Set an alarm
Note: If your phone is set
to 24 hour format, you
will need to enter the
time in that format. See
page 38. Step 3 will not
appear.
The alarm clock is based on the
phone clock. It sounds an alert any
time you specify and even works if
the phone is turned off.
If an alarm has not been set
1. At the standby screen, select
Menu > Organiser > Alarm clock
and press Select.
3. Select am or pm.
Alarm on appears briefly in the
display and
appears on the
2. Enter the time for the alarm in
standby screen.
hh:mm format and press OK.
Note: If your phone is set
to 24 hour format, you
will need to enter the
time in that format. See
page 38. Step 3 will not
appear.
Alarm conditions
When the alarm sounds, your phone
beeps, vibrates, and the display
lights up.
With the phone on, press Stop to
shut the alarm off, or press Snooze.
If you select Snooze, the alarm stops
for 10 minutes, and Snooze on
appears in the display.
3. Select am or pm.
Alarm on appears briefly in the
display and appears on the
standby screen.
Note: If you do not press a
key, the alarms stops
(snoozes) for 5 minutes, and
then sounds again.
48
Copyright 2004 Nokia. All rights reserved.
©
Download from Www.Somanuals.com. All Manuals Search And Download.
O r g a n i s e r ( M e n u 6 )
If the alarm time is reached while
the phone is switched off, the phone
switches itself on and starts
sounding the alarm tone. If you press
Stop, the device asks whether you
want to activate the phone for calls.
Press No to switch off the device or
Yes to make and receive calls. Do not
press Yes when wireless phone use
may cause interference or danger.
Go to a date
1. At the standby screen, select
Menu > Organiser > Calendar >
Press Options > Go to date, and
press Select.
2. Enter the date (for example,
29/04/2004), and press OK.
Note a specific date
You can choose from five types of
notes: Meeting, Call, Birthday, Memo,
and Reminder. Your phone asks for
further information depending on
which note you choose. You also
have the option to set an alarm for
any note that you select.
Turn an alarm off
At the standby screen, select Menu >
Organiser > Alarm clock > Off, and
press Select.
■ The calendar
1. Go to the date for which you
want to set a reminder. (See "Go
The calendar keeps track of
reminders, calls you need to make,
meetings, memo, and birthdays. It
can even sound an alarm for any of
these events.
2. From the monthly view (with the
go to date highlighted), select
Options > Make a note and press
Select.
Monthly view provides an overview
of the selected month and weeks. It
also allows you to jump to a specific
date. Any days or dates that appear
in bold font contain calendar notes
such as a meeting or reminder.
3. Select one of the following note
types:
Meeting — You are prompted to
enter a subject, location, and a
start and end time. You are then
given the option to set an alarm.
Open
Call — You are prompted to enter
a phone number, a name, and the
time. You are then given the
option to set an alarm.
At the standby screen, select Menu >
Organiser > Calendar, and press
Select.
You can move the cursor in some
calendar views by using the scroll
keys.
Birthday — You are prompted to
enter the person’s name, and year
Copyright 2004 Nokia. All rights reserved.
49
©
Download from Www.Somanuals.com. All Manuals Search And Download.
O r g a n i s e r ( M e n u 6 )
of birth. You are then given the
option to set an alarm.
The options listed below are
available eitherwhileviewing the
body of a note or viewing the
header of a note.
Memo — You are prompted to
enter a subject and an end date.
You are then given the option to
set an alarm.
View — View the full note.
Make a note — Create a new note
Reminder — You are prompted to
enter the subject you wish to be
reminded about, you are then
given the option to set an alarm.
for the selected date.
Delete — Delete the note.
Edit — Edit the note.
Move — Move the note to
another date on your calendar.
4. Enter your note, select Options >
Save, and press Select.
Repeat — Enable the note to
recur on a regular basis (daily,
weekly, bi-weekly, monthly, and
yearly).
View notes (day view)
After you have created some
calendar notes, you can view them
as follows:
Go to date — Jump to another
date on your calendar.
1. At the standby screen, select
Menu > Organiser > Calendar,
and press Select.
Send note — Send the note to
another device using text
message, or in calendar format.
2. Scroll to the date containing the
note.
Copy — Copy the note. You can
then paste the note to another
date.
Any days containing notes will be
in bold font.
Settings — Set the date and time,
date and time format, the day
each week starts and whether
you want your notes to
3. Press Options > Day notes, and
press Select.
4. To view a highlighted note, press
Options > View, and press Select.
auto-delete after a specified time.
2. Select an option.
Options while viewing a list
of notes
1. Press Options while viewing a
day’s notes to display the
following options:
Send a note
1. At the standby screen, select
Menu > Organiser > Calendar
and press Select.
50
Copyright 2004 Nokia. All rights reserved.
©
Download from Www.Somanuals.com. All Manuals Search And Download.
O r g a n i s e r ( M e n u 6 )
2. Scroll to the date containing the
note you wish to send.
2. Scroll to view the entire message,
if necessary.
Any days containing notes will be
in bold type.
Save notes
After viewing the calendar note,
select Options > Save and press
Select.
3. Press Options > Day notes, and
press Select.
4. Scroll to the note you wish to
send, and select Options > Send
note > Via calendar, or Via text
msg. > Select.
Discard notes
After viewing the calendar note,
select Options > Discard and press
Select.
5. If you selected Via calendar,
enter the number for the
recipient, or press Search to
retrieve a number from the
contacts list, and press OK. The
note is sent.
■ The calculator
The calculator in your phone adds,
subtracts, multiplies, divides,
calculates the square and the square
root, and converts currency values.
6. If you selected Via text msg,
Note: This calculator has a
limited accuracy and is
designed for simple
calculations.
select Add number.
7. Enter the number for the
recipient, or press Search to
retrieve a number from the
contacts list, and press OK.
1. At the standby screen, select
Menu > Organiser > Calculator,
and press Select.
8. Press Options > Send, and press
Select.
2. Enter the first number in the
calculation.
Receive notes
When you receive a calendar note,
your phone displays Calendar note
received. You can then save the note
in your calendar and set an alarm for
any date and time.
Press # for a decimal point if
necessary.
Press * to cycle through the add
(+), subtract (-), multiply (*), and
divide (/) characters. Pause briefly
to select the displayed character.
View notes
1. When your phone displays
Calendar note received, press
Show.
3. Enter the second number in your
calculation.
4. Press Options (equals is
highlighted) > Select.
Copyright 2004 Nokia. All rights reserved.
51
©
Download from Www.Somanuals.com. All Manuals Search And Download.
O r g a n i s e r ( M e n u 6 )
To perform a square or square root
calculation, press Options > Square
or Square root > Select.
Foreign unit expressed in
domestic units — The number of
home units it takes to make one
unit of foreign currency.
Currency converter
You can convert foreign currency to
domestic, or vice versa.
Domestic unit expressed in
foreign units — The number of
foreign units it takes to make one
unit of your home currency.
1. At the standby screen, enter a
currency amount to convert.
2. Enter the exchange rate and
press OK.
2. Press Options > In domestic or In
foreign and press Select.
Change sign
You can change the sign of any
number entered.
In domestic — converts foreign
currency to domestic currency.
In foreign — converts domestic
currency to foreign currency.
1. At the standby screen, select
Menu > Organiser > Calculator.
If you have not done so already,
you are prompted to enter the
exchange rate.
2. Enter the desired number, press
Options > Change sign and press
Select.
3. Enter the exchange rate (press
the # key to insert a decimal) and
press OK.
■ The countdown timer
You can enter a specified time (up to
99 hours and 59 minutes). When the
time runs out, your phone sounds an
alarm.
You can also edit the exchange rate
at any time.
Note: When you change base
currency, you must key in the
new rates because all
previously set exchange rates
are set to zero.
Note: The countdown timer
only works when the phone is
on. Once you turn off your
phone, the timer is no longer
active.
1. At the standby screen, select
Menu > Organiser > Calculator >
Options > Exchange rate >
Foreign unit expressed in
Set the countdown timer
1. At the standby screen, select
Menu > Organiser > Countdown
timer > Select.
domestic units or Domestic unit
expressed in foreign units and
press Select.
52
Copyright 2004 Nokia. All rights reserved.
©
Download from Www.Somanuals.com. All Manuals Search And Download.
O r g a n i s e r ( M e n u 6 )
2. Enter the time (in hh:mm format)
■ The stopwatch
and press OK.
Your phone has a stopwatch that
can be used to track time. The
stopwatch displays time in hours,
minutes, seconds and fractions of a
second in hh:mm:ss:s format.
3. Enter a note for the timer, and
press OK.
The
icon appears on the standby
screen when the countdown timer is
set.
Using the stopwatch or allowing it
to run in the background when using
other features increases the demand
on battery power and reduces the
battery life.
When the time runs out, your phone
sounds an alarm, displays the timer
note, and flashes its lights.
• Press any key during the alarm to
stop the timer.
Measure time
1. At the standby screen, select
Menu > Organiser > Stopwatch >
Split timing > Select.
• After 30 seconds the timer alert
expires automatically.
Change the time
After you have set the timer, you can
2. Press Start to begin split timing.
The running time is displayed on
the screen.
change the time.
1. At the standby screen, select
Menu > Organiser > Countdown
timer > Change time > Select.
3. Press Stop to end the timing.
The total time is displayed on the
screen.
2. Enter the new time and press OK.
3. Leave the note as it was, or enter
Measure split time
a new note and press OK.
You can use the split time function
for such things as a long distance
race when you need to pace yourself.
Stop the timer before the
alarm sounds
After you have set the timer, you can
1. At the standby screen, select
Menu > Organiser > Stopwatch >
Split timing > Start.
stop the timer.
At the standby screen, select Menu >
Organiser > Countdown timer > Stop
timer > Select.
Copyright 2004 Nokia. All rights reserved.
53
©
Download from Www.Somanuals.com. All Manuals Search And Download.
O r g a n i s e r ( M e n u 6 )
2. Press Split to note the lapsed
Save the lap time
1. While the clock is running, press
Stop > Options > Save > Select.
time.
The timer continues to run. The
split time appears below the
running time. If you split the time
more than once, the new
measured time appears at the
beginning of the list. You can
scroll to see previous measured
times.
2. Enter a name for the
measurement, and press OK.
If you do not enter a name, the
total time is used as the default
title for the lap time.
Options
You can choose the following
3. Press Stop to end the split timing.
options when using the stopwatch:
Save the split time
1. While the clock is running, press
Stop > Options > Save > Select.
Continue — Shows up when the
stopwatch is working in the
background.
2. Enter a name for the
measurement, and press OK.
Show last — Allows you to view the
last measured time.
Measure lap time
View times — Allows you to browse
You can use the lap time function
when you want to track how long it
takes to complete each cycle or lap.
the saved times.
Delete times — Allows you to delete
any saved times. You can delete the
saved times one by one or all at once.
1. At the standby screen, select
Menu > Organiser > Stopwatch >
Lap timing > Start.
Operation note
If you press the End key and return
to the standby screen, the clock
continues to run in the background
2. Press Lap to note the lap time.
The clock stops, then starts
immediately from zero. The lap
time appears below the running
time. If you take more than one
lap time, the new measured time
appears at the beginning of the
list. You can scroll to see previous
measured times. When you press
Stop, the total time appears at
the top.
and the
icon appears in the
upper left corner of the screen.
To return to the stopwatch screens:
1. At the standby screen, select
Menu > Organiser > Stopwatch >
Continue and press Select.
2. To stop the clock, press Stop.
54
Copyright 2004 Nokia. All rights reserved.
©
Download from Www.Somanuals.com. All Manuals Search And Download.
G a m e s ( M e n u 7 )
11. Games (Menu 7)
Challenge yourself or a friend to one
of the fun games in your phone.
■ Play a game
1. At the standby screen, select
Menu > Games > Select game
and press Select.
Note: Some menus listed are
network services. Contact
your wireless provider for
more information.
2. Scroll to a game and press the
Select key.
3. Select one of the following
options (if supported by the
particular game):
■ Game settings
1. At the standby screen, select
Menu > Games > Settings.
New game — Launches a new
2. Use Scroll Up and Down to select
the setting options Game sounds,
Game lights, and Shakes and set
it on or off.
game.
High scores — View the high
scores for this game (if previously
played).
Instructions — View instructions
for playing the game. Press More
for more information.
Copyright 2004 Nokia. All rights reserved.
55
©
Download from Www.Somanuals.com. All Manuals Search And Download.
R
W o r l d ( M e n u 8 )
12. R World (Menu 8)
Note: Your phone must be
switched on to use this
function. Do not switch the
phone on when wireless
phone use is prohibited or
when it may cause
■ Resetting R-Menu
If you encounter problems using R
World data services frequently, you
can reset R World. Doing this will
refresh all the services in R-Menu
only.
interference or danger.
1. At the standby screen, select
This connects you to the R World
Data Services like news, games,
messaging etc., provided by
Reliance.
Menu > R World, and press Select.
2. Scroll to Reset R-Menu and press
OK.
3. Press OK again to confirm and
reset R World.
■ Launching R World
1. At the standby screen, select
■ Closing R World
Menu > R World, and press Select.
To exit from R World any time, press
and hold the End key.
2. Scroll to Open R-Menu and press
the Select key.
Note: Audio, video streaming
is not available on this
product. All data services
may not be available to every
subscriber. Please contact
Reliance for more
The phone starts to connect to R
World and when connected,
shows the opening menu of R
World.
3. Scroll through the menu using
the Up/Down scroll keys and
information.
select any available data service.
4. Press Select and launch the
highlighted data service.
5. Follow the on-screen prompts to
navigate through the various
options available.
56
Copyright 2004 Nokia. All rights reserved.
©
Download from Www.Somanuals.com. All Manuals Search And Download.
P C C o n n e c t i v i t y
13. PC Connectivity
With the PC suite you can, for
example, create and send text and
picture messages, synchronise
contacts and calendar between your
phone and a compatible PC.You may
find more information and
downloadable files, e.g. PC suite in
the support area on the Nokia’s web
• Nokia PC Sync to synchronise the
contacts directory and calendar
between your phone and a
compatible PC.
• Nokia Connection Manager to
select the connection type
between the PC and the phone.
• Nokia Phone Browser to copy
images and tones from your
phone to your PC and vice versa.
■ PC suite
The PC Suite contains the following
features:
Note: Copyright protection
may prevent some images,
ring tones and other content
from being copied, modified,
transferred or diverted.
• Nokia Application Installer to
install Java™ applications from
the PC to the phone.
Modem setup
You can use your Nokia phone as a
modem with your laptop computer
or handheld device, giving you
access to the internet (for e-mail
and Web browsing) or corporate
networks wherever you are. For more
information on modem setup for PC
and handheld devices, please refer to
the Nokia PC Suite User Guide and
PC/PDA Connectivity Guide.
• Nokia Image Converter to make
images usable for wallpapers and
to transfer them to your phone.
• Nokia Sound Converter to edit
polyphonic ringing tones to be
compatible with your phone and
to transfer them to your phone.
• Nokia Content Copier to copy
information or back-up
information from your phone to
the PC or to another compatible
Nokia phone.
You may find more information and
downloadable files for modem setup
on the Nokia’s website,
• Nokia Phone Editor to send text
messages and edit the contacts
directory and message settings of
your phone.
Copyright 2004 Nokia. All rights reserved.
57
©
Download from Www.Somanuals.com. All Manuals Search And Download.
P C C o n n e c t i v i t y
Download software
PC Suite, the PC Suite/PC
connectivity user guide, and all
related software is provided to you
free of charge. Please download
from the mobile phone products
section at the Nokia’s website,
58
Copyright 2004 Nokia. All rights reserved.
©
Download from Www.Somanuals.com. All Manuals Search And Download.
E n h a n c e m e n t s
14. Enhancements
Check the model number of any
charger before use with this device.
This device is intended for use when
supplied with power from ACP-7
charger.
Power
• Standard 900-mAh Li-Ion
Battery (BL-5C)
• Retractable Charger (AC-1)
• Travel Charger (ACP-12)
• Standard Travel Charger (ACP-7)
• Mobile Charger (LCH-12)
Audio
Warning: Use only batteries,
chargers and enhancements
approved by Nokia for use
with this particular model.
The use of any other types
may invalidate any approval
or warranty, and may be
dangerous. For availability of
approved enhancements,
please check with your dealer.
• Headset (HS-5)
• Retractable Headset (HS-10)
• Boom Headset (HDB-4)
• FM Stereo Headset (HS-2R)
• Loopset (LPS-4)
A few practical rules about
accessories and enhancements:
Data
• Data Cable (DKU-5)
• Desk Stand with Sync (DCV-14)
Car
• Keep all accessories and
enhancements out of the reach
of small children.
• When you disconnect the power
cord of any accessory or
• Car Installation Kit (CARK-126)
• Headrest Handsfree (BHF-1)
• Mobile Holder (MBC-15S)
• Full Car Kit (CK-6)
enhancement, grasp and pull the
plug, not the cord.
• Check regularly that
enhancements installed in a
vehicle are mounted and are
operating properly.
Covers
• Xpress-on Colour Covers
• Installation of any complex car
enhancements must be made by
qualified personnel only.
Copyright 2004 Nokia. All rights reserved.
59
©
Download from Www.Somanuals.com. All Manuals Search And Download.
R e f e r e n c e i n f o r m a t i o n
15. Reference information
This section provides information
about your phone batteries,
enhancements, chargers, safety
guidelines and technical
information. Be aware that the
information in this section is subject
to change as batteries, chargers, and
enhancements change.
Use the battery only for its intended
purpose. Never use any charger or
battery that is damaged.
Do not short-circuit the battery.
Accidental short-circuiting can
occur when a metallic object such as
a coin, clip, or pen causes direct
connection of the positive (+) and
negative (-) terminals of the battery.
(These look like metal strips on the
battery.) This might happen, for
example, when you carry a spare
battery in your pocket or purse.
Short-circuiting the terminals may
damage the battery or the
■ Batteries and chargers
Your device is powered by a
rechargeable battery. The full
performance of a new battery is
achieved only after two or three
complete charge and discharge cycles.
The battery can be charged and
discharged hundreds of times but it
will eventually wear out. When the
talk and standby times are noticeably
shorter than normal, buy a new
battery. Use only Nokia approved
batteries, and recharge your battery
only with Nokia approved chargers
designated for this device.
connecting object.
Leaving the battery in hot or cold
places, such as in a closed car in
summer or winter conditions, will
reduce the capacity and lifetime of
the battery. Always try to keep the
battery between 59°F and 77°F
(15°C and 25°C). A device with a hot
or cold battery may not work
temporarily, even when the battery
is fully charged. Battery
performance is particularly limited
in temperatures well below freezing.
Unplug the charger from the
electrical plug and the device when
not in use. Do not leave the battery
connected to a charger after the
battery has finished charging.
Overcharging may shorten its
lifetime. If left unused, a fully
charged battery will lose its charge
over time. Temperature extremes
can affect the ability of your battery
to charge.
Do not dispose of batteries in a fire!
Dispose of batteries according to
local regulations. Please recycle
when possible. Do not dispose as
household waste.
60
Copyright 2004 Nokia. All rights reserved.
©
Download from Www.Somanuals.com. All Manuals Search And Download.
R e f e r e n c e i n f o r m a t i o n
Talk and standby times
■ Battery information
Operation times are estimates only
and depend on signal strength,
phone use, network conditions,
features used, battery age and
condition (including charging
habits), temperatures to which the
battery is exposed, and many other
factors.
This section provides information
about battery charging times with
the Standard Charger (ACP-7), the
Mobile Charger (ACP-12),
talk-times, and standby times. Be
aware that the information in this
section is subject to change. For
more information, contact your
service provider.
Function
Digital
Charging times
The following charging times are
approximate:
Talk time
3.5 - 4.5 hours
Standby time 111 - 169 hours
Charger
ACP-12 ACP-7
options
BL-5C 900
mAh Li-Ion
battery
1.5 hours 3 hours
Copyright 2004 Nokia. All rights reserved.
61
©
Download from Www.Somanuals.com. All Manuals Search And Download.
C a r e a n d m a i n t e n a n c e
16. Care and maintenance
Your device is a product of superior
design and craftsmanship and should be
treated with care. The suggestions below
will help you protect your warranty
coverage and enjoy your device for many
years.
•
Do not attempt to open the device
other than as instructed in this guide.
•
Do not drop, knock, or shake the
device. Rough handling can break
internal circuit boards and fine
mechanics.
•
Keep the phone and all of its parts
and accessories out of reach of small
children.
•
•
•
Do not use harsh chemicals, cleaning
solvents, or strong detergents to
clean the device.
•
Keep the device dry. Precipitation,
humidity and all types of liquids or
moisture can contain minerals that
can corrode electronic circuits. If your
device does get wet, remove the
battery and allow the device to dry
completely before replacing the
battery in it.
Do not paint the device. Paint can
clog the moving parts and prevent
proper operation.
Use only the supplied or an approved
replacement antenna. Unauthorised
antennas, modifications, or
attachments could damage the
device and may violate regulations
governing radio devices.
•
•
Do not use or store the device in
dusty, dirty areas. Its moving parts
and electronic components can be
damaged.
All of the above suggestions apply
equally to your device, battery, charger,
or any enhancement. If any device is not
working properly, take it to the nearest
authorised service facility for service.
Do not store the device in hot areas.
High temperatures can shorten the
life of electronic devices, damage
batteries, and warp or melt certain
plastics.
Note: Before sending your device
to a service facility, create a
backup of data you want to keep
such as contacts and calendar
notes.
•
Do not store the device in cold areas.
When the device returns to its normal
temperature, moisture can form
inside the device and damage
electronic circuit boards.
62
Copyright 2004 Nokia. All rights reserved.
©
Download from Www.Somanuals.com. All Manuals Search And Download.
A d d i t i o n a l s a f e t y i n f o r m a t i o n
17. Additional safety information
PACEMAKERS
■ Operating environment
Remember to follow any special
regulations in force in any area and
always switch off your device when its
use is prohibited or when it may cause
interference or danger. Use the device
only in its normal operating positions.
Pacemaker manufacturers recommend
that a minimum separation of 6 in
(15.3 cm) be maintained between a
wireless phone and a pacemaker to avoid
potential interference with the
pacemaker. These recommendations are
consistent with the independent research
by and recommendations of Wireless
Technology Research. To minimise the
potential for interference, persons with
pacemakers should
To maintain compliance with radio
frequency exposure guidelines only use
enhancements approved by Nokia for use
with this device. When the device is on
and being worn on the body, always use
an approved carrying case.
•
Always keep the device more than
6 inches (15.3 cm) from their
pacemaker when the device is
switched on
■ Medical devices
Operation of any radio transmitting
equipment, including wireless phones,
may interfere with the functionality of
inadequately protected medical devices.
Consult a physician or the manufacturer
of the medical device to determine if they
are adequately shielded from external RF
energy or if you have any questions.
Switch off your phone in health care
facilities when any regulations posted in
these areas instruct you to do so.
•
•
Not carry the device in a breast
pocket
Hold the device to the ear opposite
the pacemaker
If you have any reason to suspect that
interference is taking place, switch off
your device immediately to minimise the
potential for interference.
HEARING AIDs
Hospitals or health care facilities may be
using equipment that could be sensitive
to external RF energy.
Some digital wireless devices may
interfere with some hearing aids. If
interference occurs, consult your service
provider.
Copyright 2004 Nokia. All rights reserved.
63
©
Download from Www.Somanuals.com. All Manuals Search And Download.
A d d i t i o n a l s a f e t y i n f o r m a t i o n
■ Vehicles
■ Potentially explosive
environments
RF signals may affect improperly
installed or inadequately shielded
electronic systems in motor vehicles such
as electronic fuel injection systems,
electronic antiskid (antilock) braking
systems, electronic speed control
systems, air bag systems. For more
information, check with the
Switch off your device when in any area
with a potentially explosive atmosphere
and obey all signs and instructions.
Potentially explosive atmospheres include
areas where you would normally be
advised to turn off your vehicle engine.
Sparks in such areas could cause an
explosion or fire resulting in bodily injury
or even death. Switch off the device at
refuelling points such as near gas pumps
at service stations. Observe restrictions
on the use of radio equipment in fuel
depots, storage, and distribution areas,
chemical plants or where blasting
operations are in progress. Areas with a
potentially explosive atmosphere are
often but not always clearly marked. They
include below deck on boats, chemical
transfer or storage facilities, vehicles
using liquefied petroleum gas (such as
propane or butane), and areas where the
air contains chemicals or particles such
as grain, dust or metal powders.
manufacturer or its representative of
your vehicle or any equipment that has
been added.
Only qualified personnel should service
the device, or install the device in a
vehicle. Faulty installation or service may
be dangerous and may invalidate any
warranty that may apply to the device.
Check regularly that all wireless device
equipment in your vehicle is mounted
and operating properly. Do not store or
carry flammable liquids, gases, or
explosive materials in the same
compartment as the device, its parts, or
enhancements. For vehicles equipped with
an air bag, remember that an air bag
inflates with great force. Do not place
objects, including installed or portable
wireless equipment in the area over the
air bag or in the air bag deployment area.
If in-vehicle wireless equipment is
improperly installed and the air bag
inflates, serious injury could result.
Using your device while flying in aircraft
is prohibited. Switch off your device
before boarding an aircraft. The use of
wireless telephones in an aircraft may be
dangerous to the operation of the
aircraft, disrupt the wireless telephone
network, and may be illegal.
64
Copyright 2004 Nokia. All rights reserved.
©
Download from Www.Somanuals.com. All Manuals Search And Download.
A d d i t i o n a l s a f e t y i n f o r m a t i o n
■ Emergency calls
Important: Wireless phones,
including this phone, operate
using radio signals, wireless
networks, landline networks,
and user-programmed
functions. Because of this,
connections in all conditions
cannot be guaranteed. You
should never rely solely on any
wireless phone for essential
communications like medical
emergencies.
To make an emergency call:
1. If the phone is not on, switch it on.
Check for adequate signal strength.
2. Press the End key as many times as
needed to clear the display and ready
the phone for calls.
3. Key in the official emergency number
for your present location. Emergency
numbers vary by location.
4. Press the Send key.
If certain features are in use, you may
first need to turn those features off
before you can make an emergency call.
Consult this guide or your service
provider. When making an emergency
call, give all the necessary information as
accurately as possible. Your wireless
phone may be the only means of
communication at the scene of an
accident. Do not end the call until given
permission to do so.
Copyright 2004 Nokia. All rights reserved.
65
©
Download from Www.Somanuals.com. All Manuals Search And Download.
A d d i t i o n a l s a f e t y i n f o r m a t i o n
The highest SAR value for this model
phone when tested for use at the ear is
0.81 W/kg. While there may be
differences between the SAR levels of
various phones and at various positions,
they all meet the relevant international
guidelines for RF exposure.
■ Certification information
(SAR)
THIS MODEL PHONE MEETS
INTERNATIONAL GUIDELINES FOR
EXPOSURE TO RADIO WAVES.
Your mobile phone is a radio transmitter
and receiver. It is designed and
manufactured not to exceed the limits
for exposure to radio frequency (RF)
recommended by international
guidelines (ICNIRP). These limits are part
of comprehensive guidelines and
establish permitted levels of RF energy
for the general population. The guidelines
were developed by independent scientific
organisations through periodic and
thorough evaluation of scientific studies.
The guidelines include a substantial
safety margin designed to assure the
safety of all persons, regardless of age
and health.
This product meets RF exposure
guidelines when used either in the
normal use position against the ear or
when positioned at least 1.5 cm away
from the body. When a carry case, belt
clip or holder is used for body-worn
operation, it should not contain metal
and should position the product at least
1.5 cm away from your body.
* The SAR limit for mobile phones used by
the public is 2.0 watts/kilogram (W/kg)
averaged over ten grams of body tissue.
The guidelines incorporate a substantial
margin of safety to give additional
protection for the public and to account
for any variations in measurements. SAR
values may vary depending on national
reporting requirements and the network
band. For SAR information in other
regions please look under product
The exposure standard for mobile phones
employs a unit of measurement known as
the Specific Absorption Rate, or SAR. The
SAR limit stated in the international
guidelines is 2.0 W/kg*. Tests for SAR are
conducted using standard operating
positions with the phone transmitting at
its highest certified power level in all
tested frequency bands. Although the
SAR is determined at the highest
certified power level, the actual SAR of
the phone while operating can be well
below the maximum value. This is
because the phone is designed to operate
at multiple power levels so as to use only
the power required to reach the network.
In general, the closer you are to a base
station, the lower the power output of
the phone.
66
Copyright 2004 Nokia. All rights reserved.
©
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
countdown timer 52
currency converter 52
A
alarm clock 48
antenna 5
D
anykey answer 34
automate voicemail 24
automatic redial 34
auto-update 39
dialling codes 24
display language 36
DTMF tones 37
B
E
back cover
emergency calls 65
with keypad locked 37
enhancement settings 39
handsfree 39
removing 5
replacing 6
batteries and chargers 60
battery
headset 40
charging 6
enhancements 59
exchange rate 52
charging times 61
removing 5
replacing 5
F
talk and standby times 61
battery information 61
business cards 17
feature codes 44
G
C
games 55
calculator 51
calendar 49
H
call divert 43
call duration 31
call register 30
caller groups 14
calling cards 34
calls
handsfree 39
I
answering 8
in-call options 9
making 8
indicators and icons 2
K
care and maintenance 62
Certification information (SAR) 66
charger
Keyguard 9
automatic 36
connecting 6
information 60
times 61
L
languages 36
loudspeaker 9
contacts list 13
add 13
delete 16
edit 15
send 17
view 16
Copyright 2004 Nokia. All rights reserved.
67
©
Download from Www.Somanuals.com. All Manuals Search And Download.
M
T
message folders 27
messages
talk and standby times 61
text entry 11
delete 28
text messages 19
multimedia messages 22
picture messages 25
text messages 19
voice messages 23
multimedia messages 22
time and date settings 38
timed profiles 33
tone settings 39
N
V
view
call duration 31
call times 31
O
data/fax call duration 32
missed calls 30
picture messages 26
received calls 30
saved messages 27
view dialled numbers 31
voice 45
Organiser 48
P
phone settings 36
picture messages 25
predictive text 11
profiles 33
voice commands 46
voice dialling 45
voice messages 23
voice privacy 42
voice recorder 47
voicemail 23
Q
quick keys 2
volume
R
adjusting 9
R World 56
using the loudspeaker 9
restore factory settings 44
W
S
welcome note 37
safety vii
important safety information 63
SAR value 66
scrolling 4
security code 41
Security settings 40
set
X
Xpress-on covers 7
date 39
time 38
settings 34
Settings (Menu 4) 34
shared memory ix
shortcuts 4
speed dialling 15
start screen 2
stopwatch 53
68
Copyright 2004 Nokia. All rights reserved.
©
Download from Www.Somanuals.com. All Manuals Search And Download.
|