Wii mini Operations Manual
NEED HELP WITH INSTALLATION,
MAINTENANCE OR SERVICE?
Nintendo Customer Service
SUPPORT.NINTENDO.COM
or call 1-800-255-3700
BESOIN D’AIDE POUR L’INSTALLATION,
L’ENTRETIEN OU LA RÉPARATION?
Servicio al Cliente de Nintendo
SUPPORT.NINTENDO.COM
ou composez le 1 800 255 3700
¿NECESITAS AYUDA DE INSTALACION,
MANTENIMIENTO O SERVICIO?
Servicio al Cliente de Nintendo
System Setup
MAA-RVO-S-USZ-C0
78844A PRINTED IN CHINA
NINTENDO OF AMERICA INC.
P.O. BOX 957, REDMOND, WA
98073-0957 U.S.A.
SUPPORT.NINTENDO.COM
o llame al 1-800-255-3700
Download from Www.Somanuals.com. All Manuals Search And Download.
Health and Safety Information
WARNING - Radio Frequency Interference
WARNING - Repetitive Motion Injuries
and Eyestrain
IMPORTANT SAFETY INFORMATION – READ THE FOLLOWING
WARNINGS BEFORE SETUP OR USE OF THE Wii mini. IF THIS
PRODUCT WILL BE USED BY YOUNG CHILDREN, THIS MANUAL
SHOULD BE READ AND EXPLAINED TO THEM BY AN ADULT.
FAILING TO DO SO MAY CAUSE INJURY.
PLEASE CAREFULLY REVIEW THE INSTRUCTION BOOKLET FOR
THE GAME YOU ARE PLAYING FOR ADDITIONAL HEALTH AND
SAFETY INFORMATION.
The Wii mini console and Wii Remote Plus can emit radio waves that can affect the
operation of nearby electronics, including cardiac pacemakers.
Do not operate the Wii mini console or remote within 9 inches of a pacemaker.
If you have a pacemaker or other implanted medical device, do not use the
Wii mini console or remote without first consulting your doctor or the
manufacturer of your medical device.
Playing video games can make your muscles, joints, skin or eyes hurt. Follow these
instructions to avoid problems such as tendinitis, carpal tunnel syndrome, skin
irritation or eyestrain:
Avoid excessive play. Parents should monitor their children for appropriate play.
Take a 10 to 15 minute break every hour, even if you don’t think you need it.
If your hands, wrists, arms or eyes become tired or sore while playing, or if you feel
symptoms such as tingling, numbness, burning or stiffness, stop and rest for
several hours before playing again.
•
•
•
•
•
CAUTION - Laser Device
•
If you continue to have any of the above symptoms or other discomfort during or
after play, stop playing and see a doctor.
The Wii mini console is a Class I laser product. Do not attempt to disassemble the
Wii mini console. Refer servicing to qualified personnel only.
Caution: Use of controls or adjustments or procedures other than those specified
herein may result in hazardous radiation exposure.
WARNING - Seizures
Some people (about 1 in 4000) may have seizures or blackouts triggered by light
flashes or patterns, and this may occur while they are watching TV or playing video
games, even if they have never had a seizure before.
WARNING - Electric Shock
Specifications:
Laser Type: Semiconductor laser
Laser power: Max. 0.9mW
To avoid electric shock when you use this system:
•
Laser wave length: 662nm (typ.)(647nm~687nm)
Numeric aperture: 0.6
Do not use the Wii system during a lightning storm. There may be a risk of
electric shock from lightning.
Use only the AC Adapter that comes with your system.
Do not use the AC Adapter if it has damaged, split or broken cords or wires.
Make sure that the AC Adapter cord is fully inserted into the wall outlet or
extension cord.
Anyone who has had a seizure, loss of awareness, or other symptom linked to an
epileptic condition should consult a doctor before playing a video game.
•
•
•
Parents should watch their children play video games. Stop playing and consult a
doctor if you or your child has any of the following symptoms:
•
Always carefully disconnect all plugs by pulling on the plug and not on the cord.
Make sure the Wii mini power button is turned OFF before removing the
AC Adapter cord from an outlet.
Convulsions
Altered vision
Eye or muscle twitching
Involuntary movements
Loss of awareness
Disorientation
To reduce the likelihood of a seizure when playing video games:
CAUTION - Motion Sickness
Playing video games can cause motion sickness in some players. If you or your child
feel dizzy or nauseous when playing video games, stop playing and rest. Do not drive
or engage in other demanding activity until you feel better.
•
•
•
•
•
Sit or stand as far from the screen as possible.
Play video games on the smallest available television screen.
Do not play if you are tired or need sleep.
Play in a well-lit room.
NOTE: This product does not contain latex.
This product complies with applicable laws barring the use of toxic materials such as
lead, mercury, cadmium, hexavalent chromium, PBB or PBDE in consumer products.
Take a 10 to 15 minute break every hour.
2
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Components
Wii mini Console
Wii mini Console
Front view
Back view
Sensor Bar Connector
Connects to the Sensor Bar.
DC Input Connector
Connects to the Wii AC Adapter.
POWER Button
Press to turn the console ON or OFF.
NOTE: The Power LED does not go out
when the power is turned off.
AV Out Connector
Connects to the AV Cable for
your television.
Air Vent
USB Connector
Do not block.
Power LED
Shows the status of the Wii mini console.
Blue - Power is ON.
Red - Power is OFF.
Left side view
OPEN Button
Press to open cover. Then load
or remove the Game Disc.
SYNC Button
Used when synchronizing a Wii Remote
or Wii Remote Plus with the console.
See pages 19–20.
Air Intake
Battery Cover
Do not block.
For access to CR Coin Lithium battery (CR2032). Perchlorate Material – special handling may apply.
Do not remove battery cover unless instructed to do so by a Nintendo Customer Service representative.
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Components
Nunchuk™
Wii Remote™ Plus
Back view
Sensor Bar
(Shown with the battery cover removed.)
Nunchuk Plug
(Shown with the included Wii Remote Jacket attached.)
Connects to the External Extension
Connector on the Wii Remote Plus.
Control Stick
Sensor Bar Plug
Plugs into the Sensor Bar Connector on the back of the Wii mini console.
See pages 11–14 for installation instructions.
Pointer Lens
Wii Remote Wrist
Connector Hook
Insert the cord of the wrist
strap through the hook.
Strap
See page 18 for information on
wrist strap use.
B Button
Power Button
Press to turn the Wii mini
console ON or OFF.
+Control Pad
Strap Lock
A Button
HOME Button
Z Button
C Button
Press to display the HOME Menu
screen. See the Wii Menu Manual,
HOME Menu, for more information.
SYNC Button
Used when synchronizing a Wii
Remote Plus with the console.
See pages 19–20.
Lock/Release Levers
Squeeze levers to remove
plug from Wii Remote Plus.
Minus (–) Button
Plus (+) Button
Speaker
Wrist Strap
Attachment
To take advantage of the features of the Nunchuk accessory, you must use Wii
game software that supports Nunchuk gameplay features. Look for this icon on
game packaging for games that are designed to be used with Nunchuk.
External Extension
1 Button
Connector
Allows connection of external
accessories such as the Nunchuk.
2 Button
To avoid this from occurring, do not move the Control Stick when:
NOTE: If the Control Stick is moved out of neutral position when the Wii power is turned ON, or when
connecting to the remote, that position will be set as neutral position, causing incorrect game control during
game play. To reset the Control Stick, allow it to return to the normal neutral position, then simultaneously
hold down the A, B, Plus (+) and Minus (–) buttons on the remote for three seconds.
•
•
•
•
Turning the Wii mini console on
Plugging the Nunchuk into the Wii Remote Plus
Starting Channels from the Channel Menu
Returning to the Wii Menu from games or Channels
Player LEDs
Wrist Strap cord
Indicate which player the
remote is set up for.
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Components
System Setup
Wii AC Adapter
Wii mini Console Placement
Wii mini Console Usage Precautions
Please read and follow the precautions listed below when
setting up and using the Wii mini console. Failure to do so
may result in damage to your Wii system or accessories.
Place the Wii mini console on a flat horizontal surface.
NOTE: Choose a location to set up the console that has enough room to
allow for free flow of ventilation around the console.
•
•
Do not use any AC Adapter other than the one provided with your system.
The console has intake and exhaust vents designed to maintain adequate
ventilation. Do not operate the console in any location where these vents may
become covered or obstructed, for example, on carpet or in a tightly enclosed
space. Keep vents clear of any dust or other foreign material.
AC Plug
DC Plug
•
•
Do not disassemble or try to repair the console, accessories or components.
Doing so voids your warranty.
Connects to a 120V AC wall
Connects to the DC Input connector
on the back of the Wii mini console.
outlet.
After you have finished playing, be sure to remove the Game Disc from the
console.
•
Do not store the console in a humid place, on the floor, or in any location where it
may collect dirt, dust, lint, etc.
Wii AV Cable
•
•
Do not drop, hit or otherwise abuse the console, components or accessories.
When disconnecting any plugs from the console or wall outlet, first turn the
Wii mini console off. Then carefully pull by the plug itself rather than by the cord.
Video
•
•
•
Do not step on, sharply pull or bend any wire or cables.
Audio (Left)
Audio (Right)
Do not expose the console, components or accessories to extreme heat or cold.
Do not spill any liquids on the console, components or accessories.
To clean, use a soft slightly damp cloth. Use water only. Allow to dry completely
before using.
AV Out Plug
RCA Plugs
Plugs into the AV Out connector on the
back of the Wii mini console.
Plug into the AV input
connectors on a television.
8
9
Download from Www.Somanuals.com. All Manuals Search And Download.
System Setup
Connecting the AV Cable
Sensor Bar Setup
Connecting the Sensor Bar
TV Inputs
1. Insert the AV Out plug on the Wii AV Cable into the AV Out
connector on the back of the console.
Insert the Sensor Bar plug into the Sensor Bar
connector on the back of the console.
AUDIO L AUDIO R
VIDEO
2. Insert the RCA plugs on the Wii AV Cable into the input
connectors on the TV, VCR or other audio equipment.
Wii mini Console
Placing the Sensor Bar
The Sensor Bar can be placed either above or below the TV screen.
• See page 12 for instructions on mounting the Sensor Bar to the top of the TV.
• See page 13 for instructions on mounting the Sensor Bar below the TV screen.
Sensor Bar mounted
above the screen.
Sensor Bar mounted
below the screen.
IMPORANT: The Wii mini console will not work with any AV cable other
than the model supplied.
CAUTION - TV Screen Damage
Some televisions can be damaged by the display of a stationary image, because the image
may be permanently “burned” into the screen. Playing video games with stationary images
or patterns, or leaving video games on hold or pause, may lead to this type of damage. When
taking a break, place the game on pause and turn the TV off until you are ready to play again.
Before using your Wii system with any TV, especially front and rear projection or
plasma models, be sure to review all documentation included with your TV to find
out whether video games can be played on the TV without damaging it.
If in doubt, contact the manufacturer of the TV. Neither Nintendo nor any of Nintendo’s
licensees will be liable for any damage to your TV.
10
11
Download from Www.Somanuals.com. All Manuals Search And Download.
System Setup
Mounting the Sensor Bar Above the Screen
Mounting the Sensor Bar Below the Screen
1. Remove the protective film from the foam pads
on the bottom of the Sensor Bar.
2. Mount the Sensor Bar to the top of the TV.
1. Remove the protective film from the foam pads
on the bottom of the Sensor Bar.
2. Mount the Sensor Bar to the front edge of the
surface the TV is sitting on. Do not place the
Sensor Bar below the surface that the TV is
sitting on; for example, on shelves below
the TV.
• The front of the Sensor Bar should be
aligned close to the front of the TV.
• The front of the Sensor Bar should be
aligned with the front of the surface
the TV is sitting on.
• The center of the Sensor Bar should be
aligned with the center of the TV.
• The center of the Sensor Bar should be
aligned with the center of the TV.
12
13
Download from Www.Somanuals.com. All Manuals Search And Download.
System Setup
Input Select Information
Sensor Bar cable position
TV and Audio/Video Settings
The input select allows you to switch between the different inputs on your TV or VCR.
If desired, the Sensor Bar cable can be fed through a channel on the bottom of the
Sensor Bar to orient the cable to the left or right.
After you have completed all steps of the setup procedure and are ready to
use the Wii system, you will need to set the appropriate “input select”
setting for your TV, VCR or other audio equipment.
Manufacturers of TVs and VCRs use different names and locations for “input select.”
The common names for the input select are: input, select, input select, line, line in,
source, in, EXT, and AUX. Consult your TV or VCR instruction manual for details.
NOTE: More information on “Input Select” is available on our web site at
support.nintendo.com/consumer/inputselects.html
1. Turn ON the power for your TV and any audio equipment connected to your
gameplay setup and the power on the Wii mini console.
2. Select the correct input setting for your TV (see Input Select Information at right).
Locate the input select for the component that the Wii AV Cable is connected to (either
the TV or VCR). The most common locations for input select are:
• A button on the front of the TV or VCR.
Wii AC Adapter
3. The Wii Menu (see below) should appear on the TV screen. See the e-manual
for more information on this feature.
1. Insert the DC plug on the Wii AC Adapter cord into the DC input connector on the
back of the console.
• A button on the remote control.
• A high-numbered or low numbered channel (92, 99, 00, or 02) on the TV or VCR.
• An on-screen menu selection.
120 V AC outlet
If the Wii Menu screen does not appear, check to make sure your input setting is
correct and review the Troubleshooting section on page 27.
2. Insert the AC plug into a 120V AC wall outlet. Make sure the power is off (the
Power LED is red) when unplugging the AC Adapter.
CAUTION: To prevent electric shock, match the wide blade of the plug to the
wide slot and insert fully into outlet.
DC Input Connector
14
15
Download from Www.Somanuals.com. All Manuals Search And Download.
System Setup
1. Pull the Wii Remote jacket
off the base of the Wii
Remote Plus and pull the
wrist strap out of the hole
in the bottom of the jacket.
4. Replace the battery cover, thread
the wrist strap through the hole in
the bottom of the jacket and pull
the jacket back over the bottom of
the remote.
Installing Batteries
Setup of Wii Remote Plus
The Wii Remote Plus uses AA batteries. Nintendo recommends high quality alkaline
batteries for best performance and longevity of battery life. If you use rechargeable
nickel metal hydride (NiMH) batteries, be sure to follow the manufacturer’s
guidelines for safety and proper usage.
The Wii Remote™ Plus comes with the Wii Remote jacket installed.
• Be sure that the Wii Remote jacket is installed during gameplay to reduce
the risk of harm to the remote, surrounding objects, or people.
• It may be necessary to remove the Wii Remote jacket – for example, to
replace the batteries in the Wii Remote Plus. If you do remove the Wii
Remote jacket, be sure to replace it before further play.
WARNING - Battery Leakage
Leakage of battery fluid can cause personal injury as well as damage to your remote.
If battery leakage occurs, thoroughly wash the affected skin and clothes. Keep battery
fluid away from your eyes and mouth. Leaking batteries may make popping sounds.
To avoid battery leakage:
5. If you remove the jacket from the
remote, replace it by inserting the
top of the remote into the large
hole on the front of the jacket.
Be sure to push it all the way into
the inside of the jacket.
2. Pull the jacket up the remote far
enough to expose the entire
battery cover and remove the cover.
• Do not mix used and new batteries (replace all batteries at the same time).
• Do not mix different brands of batteries.
• Nintendo recommends alkaline batteries. Do not use Lithium ion, nickel cadmium
(nicad), or carbon zinc batteries.
• Do not leave batteries in the remote for long periods of non-use.
• Do not recharge alkaline or non-rechargeable batteries.
• Do not put the batteries in backwards. Make sure that the positive (+) and
negative (-) ends are facing in the correct directions. Insert the negative end first.
When removing batteries, remove the positive end first.
• Do not use damaged, deformed or leaking batteries.
Wii Remote Jacket
6. Thread the wrist strap throught
hole in the bottom of the jacket,
as shown in step 4, above.
7. Insert the connector cover into the
External Extension Connector on
the bottom of the remote.
3. Insert the batteries into the battery
chamber. Be sure to insert the
minus (–) end first when inserting
new batteries, and remove the
plus (+) end first when replacing
the batteries.
• Do not dispose of batteries in a fire.
NOTE: Battery life can be checked by pressing the HOME Button.
See the Wii Menu Manual for more information.
16
17
Download from Www.Somanuals.com. All Manuals Search And Download.
System Setup
Wearing the Wii Remote Wrist Strap
Standard Mode Synchronization
CAUTION - Use the Wrist Strap
Synchronizing Your Wii Remote Plus with
the Wii mini Console
1. Open the lever on the strap lock and place your hand through the wrist strap.
Hold the remote firmly in your hand.
1. Press the Power button on the Wii mini console to turn it on.
Wii gameplay with the Wii Remote Plus can involve rapid or vigorous motion.
Please use the wrist strap to prevent losing your grip on the remote and causing
damage to the remote or surrounding objects, or injury to other people.
2. Press and release the SYNC. button on the back of the Wii Remote Plus. The Player
LEDs will blink.
NOTE: Make sure you have placed batteries in the Wii Remote Plus.
This procedure allows the Wii Remote or Wii Remote Plus to communicate with
the console.
NOTE: Some models may require to remove the battery cover to push the SYNC. button.
WEAR THE WRIST STRAP WHEN USING THE Wii REMOTE PLUS.
•
•
Make sure all players use the wrist strap and that the strap lock is correctly tightened.
When sharing the Wii Remote Plus between multiple players, make sure each
person uses the wrist strap properly.
The Wii Remote Plus included with your Wii system has been synchronized
with the console at the factory.
•
Wearing the wrist strap will prevent you from accidentally dropping or throwing the
remote during gameplay, which could damage the remote or surrounding objects,
or cause injury to other people.
There are two different modes of synchronizing (syncing) a Wii Remote or Wii Remote
Plus with your console:
STANDARD MODE – The Standard Mode procedure is used when adding additional
remotes to your system or if you want to re-synchronize your original remote.
Once synchronized, the remote will stay synced to the console unless you overwrite
this setting by syncing the remote to a different console.
DO NOT LET GO OF THE REMOTE DURING GAME PLAY.
2. Slide the strap lock up so that the strap will not fall off your wrist. Do not over
tighten the strap lock so that it’s uncomfortable. It should just be tight enough to
hold the wrist strap in place. Close the lever to hold the strap lock in place.
•
•
•
Read the Instruction booklet for the game you are playing and follow all game
control instructions for correct use of the Wii Remote Plus or accessory controllers.
Hold the remote securely and avoid excessive motion, as it may cause you to let go
of the remote and may break the wrist strap.
NOTE: With Standard Mode Synchronization, you can synchronize up to 10 Wii
Remote or Wii Remote Plus controllers with your Wii mini console. The data of
the remote that was sychronized first is deleted if you synchronize more than 10.
3. Press the SYNC Button on the side
of the console. When the Player
LED blinking stops, connection is
complete. The LED that is illuminated
indicates the player number.
If your hands become moist, stop and dry your hands.
ONE TIME MODE – This mode allows you to temporarily use your remote on a console
other than your own or to use a friends remote on your console. It does not delete
the Standard Mode setting stored in the remote. In this mode, the remote will
only communicate with the console while the power is on. When the power is turned
off the remote will lose its sync with the console.
ALLOW ADEQUATE ROOM AROUND YOU DURING GAME PLAY.
•
•
Stay at least three (3) feet away from the television.
As you may move around during gameplay, make sure objects and other people are
out of your range of movement or arm motion to prevent damage or injury.
•
Only a Wii Remote or Wii Remote Plus in Standard Mode can turn the console
power ON or OFF.
IMPORTANT: This procedure must be followed for each additional remote added
to your system.
18
19
Download from Www.Somanuals.com. All Manuals Search And Download.
System Setup
Using Game Discs
During the syncing
process, the number of
LEDs that blink will show
the battery life of the
remote that is being
synchronized.
Starting the Game
1. Using the Wii Remote Plus, move the cursor over the Disc Channel option on the
Wii Menu screen and press the A Button to make a selection.
One Time Mode Synchronization
Playing a Wii Game Disc
NOTE: Nintendo GameCube™ Game Discs are not compatible
with this Wii mini console.
NOTE: This mode temporarily removes the Standard Mode synchronization setup for
all remotes until the power of the Wii mini console is turned off. When the power is
turned back on again, the Standard Mode settings will return.
MORE
Battery Life
LESS
4P
NOTE: Please see Playing Wii Discs in the built-in Wii Menu
Manual for more information on using Game Discs in the Wii
mini console.
1. Press the HOME Button on a remote that is synchronized with the console.
Before Loading a Disc
• Turn ON the power for your TV and any audio equipment connected to your
After the syncing
process, LED that is lit
shows the player
2. Select the Wii Remote Settings option
from the Home Button menu, then
select the Reconnect option.
2. Select “PLAY” on the game title screen to begin the game. Review the
instruction booklet for the game you are playing for specific
game information.
gameplay setup.
1P
2P
3P
• Select the correct input setting for your TV. (See page 15, TV and Audio/Video
Settings.)
number for that remote.
NOTE: One Time Mode synchronization is temporary. The Wii Remote or Wii
Remote Plus will lose this synchronization under the following conditions:
Game Disc Usage Precautions
Please read and follow the precautions listed below when using
Wii Game Discs in the Wii mini Console. Failure to do so may result
in damage to your Wii system or game discs.
Loading a Game Disc
Press the Open Button to open the cover. Load the Game Disc, label facing up,
onto the disc hub and press into place. Close the cover and press the POWER button
to turn the console on.
•
When you turn off the console by pressing the Power Button on either the remote
or the console.
•
•
•
•
When starting up a game or Channel from the Wii Menu.
When returning to the Wii Menu after exiting from a game or Channel.
When you select Reset on the HOME Menu screen.
• To avoid pinching your finger, do not load the disc with your finger in the
hole. Always handle the disc by the edges.
• Do not touch the bottom unprinted surface of the Game Disc. Always handle
the disc by the edges.
3. Press the 1 and 2 Buttons
simultaneously on the remote
that you want to synchronize with
the console.
When you press the Reset Button on the front of the console.
• Do not use cracked, deformed or repaired discs.
• Do not bend or put excessive pressure on discs when loading into console.
• Do not leave discs in direct sunlight or expose them to high temperatures,
high humidity or dust, dirt or other contaminates.
• When not using discs, store them in their cases to prevent them from getting
scratched, dirty or damaged.
Label faces
upwards
The order in which you synchronize
remotes will set the player order for
multiplayer games.
• Do not write on, or place stickers on any part of the disc.
• If a disc becomes dirty or contaminated with fingerprints, the system may not
be able to read the game data correctly. If necessary, clean the disc with a
soft, slightly damp cotton cloth (use water only). Clean the disc from center
towards the edges; do not use a circular motion.
IMPORTANT: IF YOUR REMOTE LOSES IT’S SYNCHRONIZATION WITH THE CONSOLE
AND YOU ARE UNABLE TO RE-SYNC IT, REVIEW THE Wii REMOTE PLUS TROUBLE-
SHOOTING PROCEDURES ON PAGE 28.
4. The Player LEDs will blink during the syncing process. When the blinking stops,
the connection is complete. See diagram at right for a description of what the
blinking indicates.
• Do not remove a disc until it has completely stopped spinning.
20
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Wii System Play Guidelines
Using the Wii Remote Plus
For best results when using the Wii system, follow these recommendations.
Wii Remote Plus Configurations
Depending on the game, the way you hold and operate the remote will vary. You may need to hold the remote in either one or two hands. Read the instruction booklet for the
game you are playing for information about what kind of gameplay control is required for that game.
Recommended distance: 3’– 10’
The remote can be used by itself, or in different configurations when connected up to other Wii accessories. These configurations can be used right or left handed.
(from Sensor Bar to Wii Remote Plus)
Wii Remote Plus – Horizontal Position
Wii Remote Plus –
Vertical Position
For best operation, play
directly in front of the TV.
CAUTION - Adequate Space Required
Be sure you have enough space around you during game play.
To avoid injury or damage, make sure other people or objects are
not within your range of motion.
For best use of the Wii Remote Plus, follow these guidelines:
•
•
•
Avoid blocking the signal between the remote, the Sensor Bar and the Wii mini
console with objects.
Use the remote the correct distance from the Sensor Bar. The optimal distance is
between 3 and 10 feet.
•
Avoid sources of infrared light in the gameplay area such as electric, propane or
kerosene heaters, flames from fireplaces or candles, and stoves or other sources of heat.
If the remote seems to operate eratically, check and adjust the Sensor Bar sensitivity if
necessary. (See the e-manual.)
•
Wii Remote Plus
Avoid bright light sources, including sunlight, behind or near the TV, shining towards
the remote or reflecting off of the screen.
Avoid highly reflective surfaces near the Sensor Bar.
and Classic Controller Pro™ (sold separately)
Be sure to read the following pages on using the Wii Remote Plus before
using the Wii system.
Wii Remote Plus and Nunchuk
•
22
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Wii Remote Plus
Using the Nunchuk
Basic Operations
Setup and Use of the Nunchuk
Point
Waving
CAUTION - Use the Wrist Strap
Point the remote at a specific place on
the TV screen.
Wave the remote back and forth from
side to side.
Wii gameplay with the Wii Remote Plus and Nunchuk can involve rapid or vigorous motion. Please use the wrist strap to prevent losing your grip on the remote
and causing damage to the remote and surrounding objects, or injury to other people.
Be sure to install the Nunchuk as described. Use the connector hook on the Nunchuk plug with the wrist strap cord to prevent the Nunchuk plug from becoming
separated from the External Extension connector on the remote and striking objects or people.
3. Open the lever on the strap lock and place your hand through the wrist strap. Hold
the remote firmly in your hand. Slide the strap lock up so that the strap will not fall
Connecting the Nunchuk
off your wrist. Do not over tighten the strap lock so that it’s uncomfortable. It
1. Feed the cord on the wrist strap
Pushing or Pulling
should just be tight enough to hold the wrist strap in place. Close the lever to
through the connector hook.
Holding or Grabbing
hold the strap lock in place.
Move the remote forward and backward.
Point the remote at a specific place on
the TV screen and move the remote
while holding down a button.
Connector Hook
2. Insert the Nunchuk plug into the
External Extension Connector on
the bottom of the remote until it
“clicks” into place.
Twisting
Move the remote in a twisting motion by
rotating your arm.
24
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Nunchuk
Troubleshooting
( B e f o r e s e e k i n g a s s i s t a n c e , r e v i e w t h e f o l l o w i n g p r o b l e m s a n d s o l u t i o n s . )
No picture on TV screen
The console Power LED does not come on, or goes off
during game play
Holding the Nunchuk and Wii Remote Plus
Disconnecting the Nunchuk
• Make sure you have completed all steps, in the order that they appear, on the Quick
Setup sheet included with your system.
• Make sure that all components of your setup are plugged into power outlets and that
all components are turned ON.
• Make sure that cable connections are correctly installed and that all plugs are
securely plugged into the appropriate connectors.
Press the Lock/Release Levers on the sides of the Nunchuk plug and pull the plug
straight out of the External Extension Connector on the bottom of the remote.
• Make sure the AC Adapter is plugged into both the wall outlet and the back of
the console.
• If the light is still off, disconnect the AC Adapter plug from the wall outlet, wait 2
minutes and plug it back into the outlet. Turn the console power ON.
• Make sure that the INPUT settings are correct for your particular setup. (Review page
15 on Input Select information.)
System unable to read the Wii Game Disc or disc will
not operate in console
NOTE: Game Discs will not start automatically. You must start disc games from the Disc
Channel on the Channel Menu screen.
• Make sure the Game Disc is inserted correctly. The label side of the disc must
face upwards.
• Check to be sure that the Game Disc is clean and in good condition. If dirty, wipe
with a soft cloth, from the center to the outside. Do not wipe with a circular motion.
• Remove the Game Disc, and turn the power OFF and then ON. Reinsert the disc and
try playing the game again.
No sound is heard or sound quality is poor
• Make sure the TV volume is not turned off or muted.
• Make sure that all audio connections are correctly installed and that all plugs are
securely plugged into the appropriate connectors.
• Make sure the Wii AV Cable is plugged into the “input” connectors on the
TV or VCR, not the “output” connectors.
• Make sure that the INPUT settings are correct for your particular setup. (Review
page 15 on Input Select information.)
• The sound in some games doesn’t begin until the game begins.
• If you have a mono TV or VCR and have left one of the audio cables unconnected
you may not get all game sounds. Use a “Y” Adapter to get both left and right
sound channels.
Lock/Release Levers
Squeeze levers to remove
plug from Wii Remote Plus.
• Check that the Game Disc will work on your version of the Wii. This system will only
work with Game Discs made for use in the USA, Canada, Mexico and Latin America.
• If your TV/VCR have both mono and stereo options, make sure they match your setup.
• Check the instruction booklet for the game you are playing to see if there are volume
controls or mono/stereo options that can be set from within the game.
IMPORTANT: Make sure the
wrist strap cord runs through
the connector hook.
Can’t get past the Language Select screen
• Synchronize your Wii Remote Plus controllers using the procedure on pages 19–22.
• Review the Sensor Bar setup instructions on pages 11–14 to ensure proper placement
and installation.
26
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
When playing a game that includes Wii MotionPlus
features, the Wii Remote Plus operates erratically
or unexpectedly.
The Wii Remote Plus may need to be recalibrated due to the following:
1. Changing batteries in the Wii Remote Plus during gameplay.
Wii Remote Plus lights blink, but don’t stay lit
(remote does not sync)
Wii Remote Plus doesn’t properly respond to player
motion (erratic hand cursor, can’t swing bat, can’t bowl, etc.)
• If the lights on your remote blink, but do not stay lit, see the first troubleshooting
step on this page, at left.
• Review the Sensor Bar setup instructions in this manual to ensure proper
placement.
• Make sure no objects are blocking the signals between the Sensor Bar, the Wii
mini console, and the Wii Remote Plus.
• Make sure batteries are not depleted.
• Check and adjust the Sensor Bar sensitivity if necessary. (See the e-manual.)
The following conditions can interfere with the operation of the remote:
1. Using the remote too close or too far from the Sensor Bar. The optimal distance is
between 3 and 10 feet.
2. Bright light sources, including sunlight, behind or near the TV, shining towards
the remote or reflecting off the TV screen.
• Review the Sensor Bar setup instructions in this manual to ensure proper placement.
• Make sure batteries are not depleted.
• Try resetting the Wii Remote Plus - remove the batteries, wait one minute,
then replace the batteries. Wait a few seconds, and then try synchronizing
the remote again.
• If you are unable to re-sync the remote, try the following procedure:
1. Turn off the power of the Wii mini console.
2. Unplug the power cord from the wall outlet for a few seconds, then plug it back
in again.
•
2. Moving Wii MotionPlus from a cold environment into a warm environment.
To recalibrate the Wii Remote Plus, place it on a flat horizontal surface with the buttons
facing down. Wait for a few seconds and check the operation. Also, review the instruc-
tion manual for the game you are playing for more information.
NOTE: This procedure must be done during gameplay.
3. Turn on the power of the Wii mini console.
4. Synchronize your Wii Remote Plus controllers using the procedure on
pages 19–22.
3. Highly reflective surfaces near the sensor bar.
If your Wii system still does not operate correctly after trying
the troubleshooting steps, DO NOT return the console to
the store. Visit support.nintendo.com for assistance and
additional troubleshooting and repair options or call
1-800-255-3700.
4. Sources of infrared light in the gameplay area such as electric, propane or
kerosene heaters, flames from fireplaces or candles, and stoves or other sources of
heat.
Wii Remote Plus or controller accessory buttons stick
Clean sticking buttons using the following procedure:
1. For the Wii Remote Plus, remove batteries and disconnect any accessories
before cleaning.
2. Use an unused toothbrush and hot tap water. Do not use boiling water,
soap or detergent.
3. Dip the toothbrush in hot water and shake off excess amount. Lightly scrub
sticking buttons, working the bristles around sides of buttons and into cracks.
4. Dry controller with soft cloth or towel and let air dry for at least 2 hours.
5. Test buttons and repeat procedure if necessary. Do not submerge in,
or pour any type of liquid onto a controller or accessory.
5. Radio frequency interference may cause the Wii Remote Plus to work erratically.
Check for and move or turn off wireless devices such as cordless phones,
wireless computer keyboards or mice or other similar devices.
If you think any of these conditions are affecting the operation of the remote, try
removing or reducing the source of interference.
28
29
Download from Www.Somanuals.com. All Manuals Search And Download.
FCC Information
Warranty and Service Information
You may need only simple instructions to correct a problem with your product. Try our web site at support.nintendo.com or call our Consumer Assistance Hotline at 1-800-255-3700,
rather than going to your retailer. Hours of operation are 6 a.m. to 7 p.m., Pacific Time, Monday - Sunday (times subject to change). If the problem cannot be solved with the troubleshooting
information available online or over the telephone, you will be offered express factory service through Nintendo. Please do not send any products to Nintendo without contacting us first.
Regulations for Equipment Use in U.S.A. and Canada
FCC and Industry Canada Information
HARDWARE WARRANTY
In order to comply with FCC radio-frequency radiation exposure guidelines for an uncontrolled exposure, this device and its antenna must not be co-located or operating in conjunction with any other
antenna or transmitter. This device complies with Part 15 of the FCC Rules and RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful inter-
ference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the manufacturer could
void the user’s authority to operate this device.
Nintendo of America Inc. (“Nintendo”) warrants to the original purchaser that the hardware product shall be free from defects in material and workmanship for twelve (12) months from the date of
purchase. If a defect covered by this warranty occurs during this warranty period, Nintendo will repair or replace the defective hardware product or component, free of charge.* The original purchaser is
entitled to this warranty only if the date of purchase is registered at point of sale or the consumer can demonstrate, to Nintendo’s satisfaction, that the product was purchased within the last 12 months.
GAME & ACCESSORY WARRANTY
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or televi-
sion reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Nintendo warrants to the original purchaser that the product (games and accessories) shall be free from defects in material and workmanship for a period of three (3) months from the date of purchase. If a
defect covered by this warranty occurs during this three (3) month warranty period, Nintendo will repair or replace the defective product, free of charge.*
SERVICE AFTER EXPIRATION OF WARRANTY
Please try our web site at support.nintendo.com or call the Consumer Assistance Hotline at 1-800-255-3700 for troubleshooting information and repair or replacement options and pricing.*
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician or call Nintendo Consumer Service at 1-800-255-3700 for assistance.
*In some instances, it may be necessary for you to ship the complete product, FREIGHT PREPAID AND INSURED FOR LOSS OR DAMAGE, to Nintendo. Please do not send any products to Nintendo without
contacting us first.
WARRANTY LIMITATIONS
The user may find the following booklet prepared by the Federal Communications Commission helpful: How to Identify and Resolve Radio-TV Interference Problems. This booklet is available from the U.S.
Government Printing Office, Washington, D.C., 20402, Stock No. 004-000-00345-4.
THIS WARRANTY SHALL NOT APPLY IF THIS PRODUCT: (a) IS USED WITH PRODUCTS NOT SOLD OR LICENSED BY NINTENDO (INCLUDING, BUT NOT LIMITED TO, NON-LICENSED GAME ENHANCEMENT AND
COPIER DEVICES, ADAPTERS, SOFTWARE, AND POWER SUPPLIES); (b) IS USED FOR COMMERCIAL PURPOSES (INCLUDING RENTAL); (c) IS MODIFIED OR TAMPERED WITH; (d) IS DAMAGED BY NEGLIGENCE,
ACCIDENT, UNREASONABLE USE, OR BY OTHER CAUSES UNRELATED TO DEFECTIVE MATERIALS OR WORKMANSHIP; OR (e) HAS HAD THE SERIAL NUMBER ALTERED, DEFACED OR REMOVED.
ANY APPLICABLE IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY LIMITED IN DURATION TO THE WARRANTY PERIODS DE-
SCRIBED ABOVE (12 MONTHS OR 3 MONTHS, AS APPLICABLE). IN NO EVENT SHALL NINTENDO BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES RESULTING FROM THE BREACH OF ANY IMPLIED OR
EXPRESS WARRANTIES. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR EXCLUSION OF CONSEQUENTIAL OR INCIDENTAL DAMAGES, SO THE ABOVE LIMITATIONS
MAY NOT APPLY TO YOU.
The term IC before the certification/registration number only signifies that the Industry Canada technical specifications were met.
This warranty gives you specific legal rights. You may also have other rights which vary from state to state or province to province. Nintendo’s address is: Nintendo of America Inc., P.O. Box 957, Redmond, WA
98073-0957 U.S.A. This warranty is only valid in the United States and Canada.
Rev. R1
Unlicensed Accessories
Do not attach unlicensed accessories to the Wii Remote Plus, as the use of unlicensed accessories may lead to injury to yourself or others and may cause
performance issues and/or damage to the system. Use of any such unlicensed accessories will invalidate your Nintendo product warranty.
30
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Error Messages
If an error occurs, a message like the following may appear on the TV screen. Proceed according to the following table.
Error Message
Try This
Error Message
Try This
Delete the save data for the channel that is running. If the same error message still appears, visit support.nintendo.
com for additional troubleshooting or call 1-800-255-3700.
Abnormal free space in Wii console save memory.
For details read the Wii console manual.
First turn the Wii mini console power OFF, and remove the AC adapter’s AC plug from the power socket.
Next, check whether the disc is dirty or scratched. If it is dirty, gently wipe with a soft cloth from the center to the
outside. Wait about 5 minutes. Then plug the AC adapter’s AC plug back into the power socket and turn the console
power on. If the same message still appears, the console may be damaged. Turn the console off immediately.
Remove the AC adapter’s AC plug from the plug, and visit support.nintendo.com for additional troubleshooting or
call 1-800-255-3700.
An error has occurred. Turn the console off, then press
the OPEN Button and remove the disc. Refer to the
console manual for help troubleshooting.
Delete the save data for the channel that is running. If the same error message still appears, visit
support.nintendo.com for additional troubleshooting or call 1-800-255-3700.
Abnormal number of files in Wii console save memory.
For details read the Wii console manual.
Wii Remote error. For details read the console manual.
See Wii Remote Plus troubleshooting in this manual.
Could not read the disc. For details read the console
manual.
There may be dirt or scratches on the disc or internal lens.
First remove the disc and gently wipe from the center to the outside with a soft cloth. Then re-insert the disc in the
Wii mini console and turn the power on again. If the same error message still appears, visit support.nintendo.com
for additional troubleshooting or call 1-800-255-3700.
Wii console save memory is corrupted. For details read
the Wii console manual.
Wii mini console save memory is corrupted. Visit support.nintendo.com for additional troubleshooting or
call 1-800-255-3700.
32
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Error Codes
If an error code appears during operation of the Wii system, please review the following tables and try the recommended solutions.
Error Code
Try This
110210
110211
110212
110213
205926
205927
205928
These errors indicate a hardware issue. Please contact Nintendo Consumer Service at 1-800-255-3700 for
assistance.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
|