Nilfisk ALTO Stereo Amplifier MAC 22 MAC 23 MAC 24 User Manual

User's Manual  
MAC  
STEREO POWER AMPLIFIER  
2.2/2.3/2.4  
R
Version 1.2 APRIL 2005  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PREFACE  
Dear Customer:  
Thanks for choosing LTO MAC 2.2/2.3/2.4 Stereo Power Amplifier which is the result of our LTO AUDIO TEAM's  
endeavors.  
For LTO AUDIO TEAM music and audio are much more than a job, they are a passion and an obsession!  
We have been designing professional audio products for a long time in cooperation with many of the world's major  
brands.  
The LTO line represents unparalleled analogue and digital products made by musicians, for musicians. With our  
design centres in Italy, Netherlands, and United Kingdom we provide you with world-class designs, while our software  
development teams continue to develop an impressive range of audio specific algorithms.  
By purchasing our LTO products you become the most important member of our LTO AUDIO TEAM. We would like  
to share with you our passion for what we design and we invite you to make suggestions, which will aid us in developing  
future products for you. We guarantee you our commitment to quality, continual research and development, and of course  
the best performance/price ratio.  
Our LTO MAC 2.2/2.3/2.4 Stereo Power Amplifier is the result of many hours of listening and tests involving  
common people, area experts, musicians and technicians. The result of this effort is the sophisticated circuit design  
featuring high power and superb quality together with superior reliability and stability to provide the highest possible  
audio performance.  
We would like to thank all the people that worked with us to make a vision real! Our designers and LTO staff  
made the MAC 2.2/2.3/2.4 Stereo Power Amplifier, a very reliable and high quality product ready for all your  
venues. And thanks to their passion for music and professional audio it has been possible for us to offer you, our  
most important team member, our continued support too.  
Thank you very much.  
LTO AUDIO TEAM  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
TABLE OF CONTENTS  
1. INTRODUCTION.....................................................................................................................................4  
2. FEATURE LIST.......................................................................................................................................4  
3. CONTROL ELEMENTS..........................................................................................................................4  
3.1 The Front Panel  
3.2 The Rear Panel  
4. INSTALLATION & CONNECTION..........................................................................................................6  
4.1 Mains Connection  
4.2 Rack Mounting  
4.3 Audio Connection  
a. Wiring Configuration  
b. In Line Connection  
5. OPERATION ..........................................................................................................................................7  
5.1 Operate MAC 2.2/2.3/2.4 in Stereo Mode  
5.1 Operate MAC 2.2/2.3/2.4 in Parallel (Mono) Mode  
5.1 Operate MAC 2.2/2.3/2.4 in Bridged Mode  
6. CAUTION FOR APPLICATION .............................................................................................................9  
6.1 General Application Instruction  
6.2 Caution for Speaker Connection  
7. TECHNICAL SPECIFICATIONS............................................................................................................10  
7.1 Specifications  
7.2 Block Diagram  
8. WARRANTY..........................................................................................................................................12  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. INTRODUCTION  
Thank you very much for expressing your confidence in LTO products by purchasing our MAC 2.2/2.3/2.4 Stereo  
Power Amplifier. With the MAC 2.2/2.3/2.4 you have acquired an extremely musical and flexible high power  
amplifier which is based on many years of experience and finding in amplifier technology and is used through the  
world in the renowned studios. The MAC 2.2/2.3/2.4 is used for professional output of stage stereo with excellent  
performance. Output power can be adjusted at the user's demand, and the sound quality and protecting circuit are  
both sophisticated.  
The front panel presents you with 6 LEDs (power LED, protection LED, clip & signal LED for each channel) and 2  
level controls, you can operate this unit more precise and easier. The output connectors are speak-on jacks and  
binding post terminals, which are used for better matching. Before connecting this unit into your sound system,  
please make sure it is powered down to prevent any electric shock.  
2. FEATURE LIST  
Sophisticated protecting circuit protects the machine from improper tampering  
Excellent frequency echo and sound quality  
High fidelity and low noise  
Balanced XLR and 1/4" TRS input connectors  
Output connectors are speak-on jacks and binding post terminals  
Stereo mode, parallel mode and bridged mode are available  
High-speed and low noise fan for releasing heat. The inside temperature determines the fan speed.  
Indicator for the output balance, as well as status indicators of SIG and CLIP. When there is any signal is more than  
100mV, the SIG LED lights up. When there is overload, the CLIP LED lights up. If anything abnormal happens to  
the circuits, the CLIP LED will be continuously on, with no action from the circuits. This helps the user todetermine  
which status it is in.  
Solid and durable, can be mounted into a cabinet  
Manufactured under QS9000, VDA6.1 certified management system  
3. CONTROL ELEMENTS  
3.1 Front Panel  
3
2
ON  
CH1  
CH2  
POWER  
PROT  
CLIP  
CLIP  
SIG  
SIG  
OFF  
POWER  
1
5
4
1 . Mains Switch  
1
This switch turns on and off the unit by controlling both phases.  
2 . Power LED  
2
This Power LED lights up when the unit is powered up.  
3
3. Protection LED  
This red LED lights up when the thermal-protection system is working, no signal is output during this  
protection period. When any overheating occurs inside the unit (the critical temperature is 800C), you should  
speed up the air circulation or decrease the signal level for avoiding overheating. If the problem is corrected  
the protection systems deactivate automatically, this LED goes out, and the normal amplifier operation is  
resumed.  
4. Clip Signal LED  
4
The clip LEDs light up when distortion reaches or exceeds 0.5% approximately, which means the unit is being driven  
by excessively high signal source, and you'd better adjust the level control until these LEDs go out.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Signal LED  
These signal indicators light up when the output is more than 100mV.  
5
5. Level Control  
These level controls are used to adjust the output signal level, you'd better adjust them properly to avoid any distortion.  
3.2 Rear Panel  
11  
6
7
INPUT  
CONNECTION  
CH-2  
(+)  
2
SRT  
1
3
LINE  
CH-1  
CH-2  
T(+)  
R(  
S(GND)  
WARNING  
(GND)  
TO REDUCE THE RISK OF FIRE  
OR ELECTRIC SHOCK, DO NOT  
EXPOSE THIS APPARATUS TO  
RAIN OR MOISTURE.  
-
)
BREAKER  
(
-)  
SEE INSTRUCTION BEFORE  
USING!  
OFF  
ON  
LF 30HZ  
FILTER  
BRIDGED  
MONO  
Apparaten skall anslutas till  
jordat uttag nar den ansluts  
till ett natverk  
BALANCED  
INPUT  
1.15V/20K  
BRIDGED  
STEREO  
PARALLEL  
CHANNEL 1  
CHANNEL 2  
LINE  
(MONO)  
ON  
CLIP LIMT  
MODEL  
SERIAL  
OFF  
CH-1  
BRIDGED INPUT  
A104  
8
10 12  
13  
9
6. Breaker  
6
This switch works as fuse for protecting the unit from damage. When the unit is overloaded or the temperature  
inside the unit is too high, this pushing-button will spring up and break the power supply. The power supply  
will be restored with pushing the switch down again.  
7
7. AC Inlet  
This connector is meant for the connection of the supplied main cord. Do not insert the power cord into this  
unit until voltage has been correctly set. Do not plug the power cord into the mains until the voltage has been  
correctly set.  
8. Input Connectors  
8
These connectors include the balanced XLR servo connectors and 1/4" TRS phone jacks. It is used to connect  
the input signal.  
9. Output Connectors  
9
These connectors include the speak-on jacks and binding post terminals, you can output the powered signal  
by the specific output connectors according to the actual application circumstance.  
Caution: turn off the unit before connecting the output connectors so as to avoid any electric shock!  
10. Clip Limit Switch  
10  
Set this switch at "ON" position, once the output level is above the maximum level, the clip limt begin, which  
is used to keep fixed output level for protecting apparatus. If the switch is at "OFF", this clip limt function  
doesn't work.  
11. LF 30Hz Filter 11  
Setting this switch to "ON" is equal to adding an appropriate low-pass filter in the input circuit, which is used to protect  
the speaker system from the damage caused by large subsonic frequencies.  
12. Mode Selector 12  
The MAC 2.2/2.3/2.4 stereo power amplifier presents three operating modes:  
- Stereo Mode  
In this mode, CHA and CHB operate independently (as a conventional stereo amplifier)  
The CHA input signal will be output from the CHA output connector, and CHB input signal will be output from  
the CHB output connector.  
- Parallel Mono Mode  
In this mode, CHA input signal will be output from the output connectors of both channels, detail wiring  
diagram you can refer to chapter 5.  
- Bridged Mode  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
In this mode, CHA input signal will be output from the bridge output connector, detail wiring diagram you can  
refer to chapter 5.  
13. Fan 13  
This fan release the heating from the unit by accelerating the air circulation (air flowing from front to back), and  
the speed is continuously variable.  
4. INSTALLATION & CONNECTION  
4.1 Mains Connection  
Do not insert the power cord into this unit until voltage has been correctly set. Do not plug the power cord into the  
mains until the voltage has been correctly set. Please ensure that the MAC 2.2/2.3/2.4 Professional Stereo  
Amplifier is supplied with the correct voltage before turning on this unit. If you can't power up this unit while turning  
on the Mains Switch (1), please check the Breaker (6) on the rear panel first, maybe it is pressed to reset. Otherwise,  
contact the technician or qualified personnel for any service.  
Caution: To reduce the risk of electric shock, do not perform any servicing other than contained in this manual unless  
you are qualified to do so. Please turn off this unit before any installation and connection, esp. when you connect  
your unit into the sound system. This is important to prevent damage to the unit itself as well as other consequent  
speaker system. The mains connection of the MAC 2.2/2.3/2.4 Professional Stereo Amplifier is made by using  
the enclosed power cord and a standard IEC receptacle, and it meets all of the international safety certification  
requirements.  
4.2 Rack Mounting  
The most secure mounting is on a universal rack shelf available from various rack manufactures or your music  
dealer. The MAC 2.2/2.3/2.4 Professional Stereo Amplifier fits into one standard 19" rack unit of space.Be sure  
that there is enough air space around the unit for sufficient ventilation. If heat release is inadequate, this unit  
will retain heat inside, which may cause the protection, or even a fire.  
4.3 Audio Connection  
The LTO MAC 2.2/2.3/2.4 Professional High Power Amplifier presents with balanced XLR connectors and 1/4" TRS  
phone jack and it can be interfaced by several ways to support a variety of applications without any signal loss.  
a. Wiring Configuration  
Either the 1/4" TRS (Tip-Ring-Sleeve) phone jack or the XLR servo connector can be wired in balanced and unbal-  
anced modes, which will be determined by the actual application status, Please wire your systems as the following  
examples:  
For 1/4" Phone jack  
+
+
+
-
Tip  
Sleeve  
Tip  
Sleeve  
Tip  
Ring  
Ring  
Sleeve  
TS Type Unbalanced  
TRS Type Balanced  
TRS Type Unbalanced  
For XLR connector  
Pin2 (+)  
Pin2 (+)  
Pin3 (-)  
Pin3 (-)  
(Linked to Pin1 manually,  
)
Pin1 (  
)
Pin1 (  
)
XLR Type Unbalanced  
XLR Type Balanced  
b. In Line Connection  
For these applications, the MAC 2.2/2.3/2.4 stereo power amplifier provides XLR connectors and 1/4" TRS phone jack to  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
easily interface with most professional audio devices. Follow the configuration examples below for your particular  
connection.  
Balanced  
Tip  
Ring  
Tip  
Ring  
Sleeve  
SLEEVE RING TIP  
TIP RING SLEEVE  
Sleeve  
1
2
1
2
3
3
Tip  
1
2
3
Ring  
TIP RING SLEEVE  
Sleeve  
Unbalanced  
Tip  
1
2
3
Ring  
Sleeve  
TIP RING SLEEVE  
Tip  
1
2
3
Sleeve  
TIP SLEEVE  
1
2
3
Centre  
Screen  
Tip  
Tip  
TIP SLEEVE  
SLEEVE TIP  
Sleeve  
Sleeve  
Tip  
Tip  
Ring  
Ring  
TIP RING SLEEVE  
SLEEVE RING TIP  
Sleeve  
Sleeve  
Tip  
Centre  
Screen  
Sleeve  
TIP SLEEVE  
Tip  
Centre  
Screen  
Ring  
Sleeve  
TIP RING SLEEVE  
1
2
1
2
3
3
5.OPERATION  
The MAC 2.2/2.3/2.4 stereo power amplifie provides three operating modes with each unit: stereo mode, parallel  
(mono) mode and bridged mode, you can decide each specific operating mode according to your actual application  
circumstance. Following exampleswill show you the typical connections, you can refer to install your MAC 2.2/2.3/2.4  
into a sound system:  
5.1 Operate MAC 2.2/2.3/2.4 in Stereo Mode  
In this mode, channel A and channel B operate independently ( as a conventional stereo amplifier). The channel  
A input signal will be output from the channel A output connectors, and the channel B input signal will be output  
from the channel B output connectors.  
Input wiring tips  
BALANCED  
UNBALANCED  
SHIELD  
GND  
1
2
1
2
3
3
FROM  
SOURCE  
FROM  
SOURCE  
INPUT  
INPUT  
+
+
SHIELD  
SHIELD  
INPUT  
CONNECTION  
CH-2  
(+)  
SRT  
2
1
3
LINE  
CH-1  
CH-2  
T(+)  
R(  
S(GND)  
WARNING  
(GND)  
TO REDUCE THE RISK OF FIRE  
OR ELECTRIC SHOCK, DO NOT  
EXPOSE THIS APPARATUS TO  
RAIN OR MOISTURE.  
SEE INSTRUCTION BEFORE  
USING!  
-
)
CHANNEL B  
CHANNEL A  
BREAKER  
(
-)  
OFF  
ON  
LF 30HZ  
FILTER  
BRIDGED  
MONO  
Apparaten skall anslutas till  
jordat uttag nar den ansluts  
till ett natverk  
BALANCED  
INPUT  
1.15V/20K  
BRIDGED  
STEREO  
PARALLEL  
CHANNEL  
1
CHANNEL  
2
LINE  
(MONO)  
ON  
CLIP LIMT  
MODEL  
SERIAL  
OFF  
CH-1  
BRIDGED INPUT  
A104  
BRIDGED  
STEREO  
PARALLEL  
(MONO)  
Channel B  
+
Channel A  
+
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Input wiring tips  
BALANCED  
UNBALANCED  
SHIELD  
GND  
1
2
1
2
3
3
FROM  
SOURCE  
FROM  
SOURCE  
INPUT  
INPUT  
+
+
SHIELD  
SHIELD  
INPUT  
CONNECTION  
CH-2  
(+)  
SRT  
T(+)  
2
1
3
LINE  
CH-1  
CH-2  
WARNING  
(GND)  
TO REDUCE THE RISK OF FIRE  
OR ELECTRIC SHOCK, DO NOT  
EXPOSE THIS APPARATUS TO  
RAIN OR MOISTURE.  
SEE INSTRUCTION BEFORE  
USING!  
R(  
-
)
CHANNEL B  
CHANNEL A  
(
-)  
BREAKER  
S(GND)  
OFF  
ON  
LF 30HZ  
FILTER  
BRIDGED  
MONO  
Apparaten skall anslutas till  
jordat uttag nar den ansluts  
till ett natverk  
BALANCED  
INPUT  
1.15V/20K  
BRIDGED  
STEREO  
PARALLEL  
(MONO)  
ON  
CLIP LIMT  
CHANNEL  
1
CHANNEL  
2
LINE  
MODEL  
SERIAL  
OFF  
CH-1  
BRIDGED INPUT  
A104  
BRIDGED  
STEREO  
PARALLEL  
(MONO)  
Channel B  
PIN 1+  
+
PIN 1-  
Channel A  
PIN 1+  
+
PIN 1-  
5.2 Operate MAC 2.2/2.3/2.4 in Parallel (Mono) Mode  
In this mode, the channel A input signal will be output from the output connectors of both channels. The channel  
B input jack is not used, the channel A and B volumes can be adjusted independently.  
Input wiring tips  
BALANCED  
UNBALANCED  
SHIELD  
GND  
1
2
1
2
3
3
FROM  
SOURCE  
FROM  
SOURCE  
INPUT  
INPUT  
+
+
SHIELD  
SHIELD  
INPUT  
CONNECTION  
CH-2  
(+)  
SRT  
2
1
3
LINE  
CH-1  
CH-2  
T(+)  
R(  
S(GND)  
WARNING  
(GND)  
TO REDUCE THE RISK OF FIRE  
OR ELECTRIC SHOCK, DO NOT  
EXPOSE THIS APPARATUS TO  
RAIN OR MOISTURE.  
-
)
BREAKER  
(
-)  
NO USING  
SEE INSTRUCTION BEFORE  
USING!  
OFF  
ON  
LF 30HZ  
FILTER  
BRIDGED  
MONO  
Apparaten skall anslutas till  
jordat uttag nar den ansluts  
till ett natverk  
BALANCED  
INPUT  
1.15V/20K  
BRIDGED  
STEREO  
PARALLEL  
(MONO)  
ON  
CLIP LIMT  
CHANNEL  
1
CHANNEL  
2
LINE  
CHANNEL A  
MODEL  
SERIAL  
OFF  
CH-1  
BRIDGED INPUT  
A104  
BRIDGED  
STEREO  
PARALLEL  
(MONO)  
Channel B  
+
Channel A  
+
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Input wiring tips  
BALANCED  
UNBALANCED  
SHIELD  
GND  
1
2
1
2
3
3
FROM  
SOURCE  
FROM  
SOURCE  
INPUT  
INPUT  
+
+
SHIELD  
SHIELD  
INPUT  
CONNECTION  
CH-2  
(+)  
SRT  
2
1
3
LINE  
CH-1  
CH-2  
T(+)  
R(  
S(GND)  
WARNING  
(GND)  
TO REDUCE THE RISK OF FIRE  
OR ELECTRIC SHOCK, DO NOT  
EXPOSE THIS APPARATUS TO  
RAIN OR MOISTURE.  
-
)
NO USING  
(
-
)
BREAKER  
SEE INSTRUCTION BEFORE  
USING!  
OFF  
ON  
LF 30HZ  
FILTER  
BRIDGED  
MONO  
Apparaten skall anslutas till  
jordat uttag nar den ansluts  
till ett natverk  
BALANCED  
INPUT  
1.15V/20K  
BRIDGED  
STEREO  
PARALLEL  
(MONO)  
ON  
CLIP LIMT  
CHANNEL  
1
CHANNEL  
2
LINE  
CHANNEL A  
MODEL  
SERIAL  
OFF  
CH-1  
BRIDGED INPUT  
A104  
BRIDGED  
STEREO  
PARALLEL  
(MONO)  
Channel B  
PIN 1+  
+
PIN 1-  
Channel A  
PIN 1+  
+
PIN 1-  
5.3 Operate MAC 2.2/2.3/2.4 in Bridged Mode  
In this mode, the channel A input signal will be output from the bridge output connectors. In this case, use the  
channel A volume control to adjust the volume, keep the volume control of channel B turned completely down  
(counterclockwise). Bridged mode is intended for driving loads with a total impedance of 4 ohms or greater.  
Input wiring tips  
BALANCED  
UNBALANCED  
SHIELD  
GND  
1
2
1
2
3
3
FROM  
SOURCE  
FROM  
SOURCE  
INPUT  
INPUT  
+
+
SHIELD  
SHIELD  
INPUT  
CONNECTION  
CH-2  
(+)  
SRT  
2
1
3
LINE  
CH-1  
CH-2  
T(+)  
R(  
S(GND)  
WARNING  
(GND)  
TO REDUCE THE RISK OF FIRE  
OR ELECTRIC SHOCK, DO NOT  
EXPOSE THIS APPARATUS TO  
RAIN OR MOISTURE.  
SEE INSTRUCTION BEFORE  
USING!  
-
)
BREAKER  
(
-)  
NO USING  
OFF  
ON  
LF 30HZ  
FILTER  
BRIDGED  
MONO  
Apparaten skall anslutas till  
jordat uttag nar den ansluts  
till ett natverk  
BALANCED  
INPUT  
1.15V/20K  
BRIDGED  
STEREO  
PARALLEL  
(MONO)  
ON  
CLIP LIMT  
CHANNEL  
1
CHANNEL  
2
LINE  
CHANNEL A  
MODEL  
SERIAL  
OFF  
CH-1  
BRIDGED INPUT  
A104  
BRIDGED  
STEREO  
PARALLEL  
(MONO)  
Channel B+  
Channel A+  
+
NO USING  
6. CAUTION FOR APPLICATION  
6.1 General Application Instruction  
The following instructions describe the common ways to install your MAC 2.2/2.3/2.4 stereo power amplifier  
into a sound application system:  
1. First, turn off power switch before connection.  
2. Refer to chapter 5 for speaker connection  
3. MAC 2.2/2.3/2.4 stereo power amplifier may be operated in one of the three modes, please slide the mode  
selector (12) for the specific operating mode.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
6.2 Caution for Speaker Connection  
The output capacity of MAC 2.2/2.3/2.4 stereo power amplifier is very high, be sure to use a speaker system that has  
sufficient input capacity. If the input capacity of your speaker system is lower than the rated output of the MAC 2.2/  
2.3/2.4 stereo power amplifier, you can protect your speakers by connecting a fuse serially between the speaker and  
the amplifier as shown below.  
(+)  
(-)  
Fuse  
+
-
Speaker  
System  
Output  
ON  
CH1  
CH2  
CLIP  
CLIP  
SIG  
SIG  
OFF  
POWER  
Use the following formula to determine the fuse capacity according to the speaker's input capacity.  
Po=I2 R  
I= Po/R  
Po[W] : Speaker's continuous input capacity (noise or RMS)  
R[ ] : Speaker's nominal impedance  
I[A] : Required fuse capacity  
As to the speaker cable, if you use a long one, use as thick a cable as possible to prevent deterioration of the  
damping factor or power loss inside the cable.  
7. TECHNICAL SPECIFICATIONS  
7.1 Specifications  
MAC 2.2  
480  
MAC 2.3  
800  
MAC 2.4  
1400  
POWER SPECIFICATIONS  
2 Ohms  
4 Ohms  
8 Ohms  
8 Ohms  
4 Ohms  
STEREO MODE  
(Both channels driven)  
20Hz~20KHz  
300  
450  
750  
205  
310  
575  
560  
900  
1500  
Bridge Mono Mode  
20Hz~20kHz  
800  
1400  
2500  
600W  
1.15V(+3.4dBu)  
900W  
1.15V(+3.4dBu)  
1500W  
1.15V(+3.4dBu)  
ELECTRICAL SPECIFICATIONS  
INPUT SENSITIVITY  
INPUT IMPEDANCE  
10K Unbalanced 20K Balanced  
25Hz~25KHz +0/-1dB  
-3dB points: 5Hz~50KHz  
FREQUENCY RESPONSE  
(at 10dB below rated output power)  
30dB  
<0.03%  
100dB  
600W  
32dB  
<0.03%  
100dB  
900W  
34dB  
<0.03%  
100dB  
1500W  
VOLTAGE GAIN  
DISTORTION(SMPTE-1M)  
S/N ratio  
GENERAL SPECIFICATIONS  
Full short circuit, open circuit, thermal, ultrasonic, and RF protection stable into reactive  
or mismatched loads, turn ON/OFF, muting, tried crowbar.  
PROTECTIONS  
CONTROLS  
Front: AC switch 40-detect input level control for each channel.  
Rear: stereo/ parallel/ bridged selector, 30Hz filter selector clip ON/OFF selector.  
SIGNAL: 2 green LED  
POWER: 1 Blue LED  
CLIP:  
2
red LED  
INDICATORS  
PROTECTION: 1 red LED  
INPUT : Active balanced XLR and 1/4"(6.3mm)TRS  
CONNECTORS  
OUTPUT: "Touch-proof" binding posts and speak-on jacks.  
POWER SUPPLY  
DIMENSIONS  
WEIGHT  
Available for 110-120V or 220~240V AC, 50/60Hz  
483(W) 400(D) 88.8(H)mm  
14.4kg  
16.54kg  
19.02kg  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7.2 Block Diagram  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7. WARRANTY  
1. WARRANTY REGISTRATION CARD  
To obtain Warranty Service, the buyer should first fill out and return the enclosed Warranty Registration Card within  
10 days of the Purchase Date.  
All the information presented in this Warranty Registration Card gives the manufacturer a better understanding of  
the sales status, so as to purport a more effective and efficient after-sales warranty service.  
Please fill out all the information carefully and genuinely, miswriting or absence of this card will void your warranty  
service.  
2. RETURN NOTICE  
2.1 In case of return for any warranty service, please make sure that the product is well packed in its original shipping  
carton, and it can protect your unit from any other extra damage.  
2.2 Please provide a copy of your sales receipt or other proof of purchase with the returned machine, and give detail  
information about your return address and contact telephone number.  
2.3 A brief description of the defect will be appreciated.  
2.4 Please prepay all the costs involved in the return shipping, handling and insurance.  
3. TERMS AND CONDITIONS  
3.1 LTO warrants that this product will be free from any defects in materials and/or workmanship for a period  
of 1 year from the purchase date if you have completed the Warranty Registration Card in time.  
3.2 The warranty service is only available to the original consumer, who purchased this product directly from the  
retail dealer, and it can not be transferred.  
3.3 During the warranty service, LTO may repair or replace this product at its own option at no charge to you for  
parts or for labor in accordance with the right side of this limited warranty.  
3.4 This warranty does not apply to the damages to this product that occurred as the following conditions:  
Instead of operating in accordance with the user's manual thoroughly, any abuse or misuse of this product.  
Normal tear and wear.  
The product has been altered or modified in any way.  
Damage which may have been caused either directly or indirectly by another product / force / etc.  
Abnormal service or repairing by anyone other than the qualified personnel or technician.  
And in such cases, all the expenses will be charged to the buyer.  
3.5 In no event shall LTO be liable for any incidental or consequential damages. Some states do not allow the exclu-  
sion or limitation of incidental or consequential damages, so the above exclusion or limitation may not apply to you.  
3.6 This warranty gives you the specific rights, and these rights are compatible with the state laws, you may also  
have other statutory rights that may vary from state to state.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SEIKAKU TECHNICAL GROUP LIMITED  
SEKAKU ELECTRON INDUSTRY (H.K.) CO., LTD.  
No. 1, Lane 17, Sec. 2, Han Shi West Road, Taichung 40151, Taiwan  
email: [email protected] Fax: 886-4-22346757  
All rights reserved to ALTO. All features and content might be changed  
without prior notice. Any photocopy, translation, or reproduction of part of this  
c
manual without written permission is forbidden. Copyright  
2005 SEIKAKU GROUP  
NF01893-1.2  
Download from Www.Somanuals.com. All Manuals Search And Download.  

MTX Audio Stereo Amplifier POWER AMPLIFIE User Manual
Napoleon Fireplaces Indoor Fireplace GD82NT User Manual
NETGEAR Modem DGN100Bv3 User Manual
Nextar MP3 Player MA715 User Manual
NordicTrack Treadmill 306000 User Manual
Oki Printer 6200n User Manual
Optimus Home Theater System SYSTEM 746 User Manual
Panasonic Conference Phone KX TS401W User Manual
Panasonic Digital Camera AJ HDC27FE User Manual
Panasonic Flat Panel Television BT LH2600WMC User Manual