NEPTUNE E
english
deutsch
français
Operating Instructions................................3-16
Betriebsanleitung......................................17-30
Notice d’utilisation....................................31-44
nederlands Gebruiksaanwijzing ..................................45-58
italiano
Istruzioni sull’uso......................................59-72
Driftsinstruks.............................................73-86
Bruksanvisning .......................................87-100
Driftsvejledning.....................................101-114
Käyttöohje..............................................115-128
norsk
svensk
dansk
suomi
–’™ˆ‘–9Œ u„™’‡Œ’ê„ꘓ’•„ꢀ’ ...............................129-142
|“˜—–—™’ê„ê•„‡ .......................................143-156
–’™ˆ‘–ŽUê w•ˆ™5‡Ž’™Uê‘5™’‡..................................157-170
‹•™„—–ŽŒê
:ˆ–ŽUê
w•’™’‘Bê‘5™’‡........................................171-184
p‘–—•˜Ž†„ê’ꢀ– ˜ŠŒ....................................185-198
rˆˆ>–Œê˜—„–B—5– .....................................199-212
Ðóêîâîäñòâî ïî ýêñïëóàòàöèè ...............213-226
Instrucciones de manejo......................227-240
“’–ŽŒê
„Šœ„•ê
ðóññêèé
español
português Instruções de operação........................241-254
İȜȜȘȞȚțȐꢀ ȅįȘȖȓİȢꢀȜİȚIJȠȣȡȖȓĮȢ..............................255-268
türkçe
Ýþletme kýlavuzu.....................................269-282
301002408 - 2005-08-16
Download from Www.Somanuals.com. All Manuals Search And Download.
NEPTUNE E
english
Contents
1
2
3
Important safety
instructions
............................................................................................4
Description
2.1 Purpose................................................................................6
2.2 Operating elements..............................................................6
Before starting the cleaner
3.1 Transport and assembly .......................................................7
3.2 Set the brake........................................................................7
3.3 Fill up detergent tanks..........................................................7
3.4 Connecting the high pressure hose......................................7
3.5 Connecting the water supply................................................8
3.6 Electrical connection ............................................................8
3.7 Antifreeze - before first use ..................................................8
4
5
Control / Operation
4.1 Connecting the spray lance to the spray gun .......................8
4.2 Switching on the cleaner ......................................................9
4.3 Using cleaning agents..........................................................9
Applications and methods
5.1 Techniques .........................................................................10
5.1.1 Soaking ..............................................................................10
5.1.2 Detergent and Foam ..........................................................10
5.1.3 Temperature .......................................................................10
5.1.4 Mechanical Effect...............................................................10
5.1.5 High Water Flow or High Pressure.....................................10
5.2 Some typical cleaning tasks...............................................11
5.2.1 Agriculture..........................................................................11
5.2.2 Vehicle................................................................................11
5.2.3 Buildings and Equipment....................................................12
6
7
After using the cleaner
Maintenance
6.1 Switching off the cleaner ....................................................12
6.2 Disconnecting supply lines.................................................12
6.3 Storing the cleaner (below 0°C (32°F)) ..............................12
7.1 Maintenance Schedule.......................................................13
7.2 Maintenance work..............................................................13
7.2.1 Water filters ........................................................................13
7.2.2 Checking the pump oil quality ............................................13
7.2.3 Changing the pump oil .......................................................14
8
9
Troubleshooting
8.1 Indications on Display ........................................................14
8.2 Indication lights on control panel........................................15
8.3 Other Faults........................................................................15
Further information
9.1 Recycling the cleaner.........................................................15
9.2 Guarantee ..........................................................................16
9.3 Technical data ....................................................................16
9.4 EU Declaration of Conformity.............................................16
1) Accessories / model variants
3
Download from Www.Somanuals.com. All Manuals Search And Download.
NEPTUNE E
english
Safety instructions
these operating
structions which
Symbols used to mark
instructions
T h i s i n d i -
cates tips
and instructions
to simplify work
to ensure safe opera-
must be observed
to prevent risks
to persons are marked with this
danger symbol.
a n d
tion.
Before using the
high-pressure
cleaner, be sure
to also read the
enclosed operat-
This symbol is used to
mark safety instruc-
tions that must be
observed to prevent
damage to the machine
and its performance.
O p e r a t i o n s
marked with this
symbol should
only be carried
out by Nilfisk-
A l t o S e r v i c e
ing instructions
and keep them within reach at
all times.
Technicians.
1 Important safety instructions
Use the high-pressure cleaner
Use only detergents approved
by Nilfisk-Alto.
only when the power cord is in
a safe condition. (risk of electric
shock using damaged cord!).
Transport
Check the rated voltage of the
high-pressure cleaner before
connecting it to the mains power
supply. Ensure that the voltage
shown on the rating plate cor-
responds to the voltage of the
power supply.
We strongly recommend that the
power supply to the high pres-
sure cleaner be connected via a
residual current circuit breaker.
This device stops the supply of
electricity if the leakage current
to the ground exceeds 30 mA for
30 ms or it has an ground tester
circuit.
For your own safety
Transport of the high-pressure
cleaner is easy on its large
wheels.
The high-pressure cleaner
should only be used by author-
ized persons who have been
instructed in its use.
For safe transport in and on ve-
hicles we recommend preventing
the equipment from sliding and
tilting. Secure it with tie-downs
and apply the parking brake on
the castor wheel.
Although extremely easy to
operate, children should not be
allowed to use the cleaner.
For transport at temperatures
around or below freezing 0°C
(32°F), anti-freeze should be
drawn into the pump beforehand
(see chapter 6).
General
Use of the high-pressure cleaner
is subject to the applicable local
regulations.
Please observe the regulations
and provisions applicable in your
area. Before putting the high-
pressure cleaner into service,
carry out a visual check of all
the major components.
Besides the operating instruc-
tions and the binding accident
prevention regulations valid in
the country of use, observe rec-
ognized regulations for safety
and proper use.
Before starting the cleaner
Before use, check that the high-
pressure cleaner is safe and in
proper condition.
Regularly check whether the
power cord is damaged or shows
signs of ageing.
Do not use any unsafe work
techniques.
CAUTION!
High-pressure water jets can
be dangerous if misused. The
1) Accessories / model variants
4
Download from Www.Somanuals.com. All Manuals Search And Download.
NEPTUNE E
english
jet must not be directed at Never operate the cleaner with- Do not make any technical
persons, animals, live electri- out water.Even brief shortages of modifications to the high-pres-
cal equipment or the cleaner water result in severe damage to sure cleaner.
itself.
the pump seals.
Wear appropriate protective
clothing and eye protection.
Ensure that the machine is
regularly serviced by authorized
Nilfisk-Alto dealers in accordance
with the maintenace plan.Failure
Operation
Do not direct the jet towards
yourself or towards other per- Keep cabinet and service door to do so will void the warranty.
sons in order to clean clothes or closed during operation.
footwear.
CAUTION!
Connect the machine directly to High-pressure hoses, fittings
During operation of the cleaner, a plug socket. Do not use exten- and couplings are important for
recoil forces are produced at the sion cords.
gunvalve and spray lance and,
the safety of the cleaner. Use
only high-pressure parts ap-
when the spray lance is held at Do not damage the power cord proved by the manufacturer!
an angle, a torque is also created. (e.g. by driving over it, pulling or
The gunvalve and spray lance- crushing it).
must therefore be held firmly in
The power cord must not differ
from the version specified by the
both hands.
Disconnect the power cord by manufacturer and may only be
grasping the plug only (do not changed by an electrician.
Do not use the cleaner when pull or tug the power cord).
other people without protective
clothing are in the working area.
Electrical equipment
Please contact your local au-
thorized Nilfisk-Alto equipment
distributor for all other mainte-
nance or repair needs!
Check that cleaning will not
result in dangerous substances
(e.g.asbestos, oil) being washed
off the object to be cleaned and
Testing
CAUTION!
harming the environment.
The cleaner conforms to the Ger-
man „Guidelines for Liquid Spray
Jet Devices“. The high-pressure
cleaner must be subjected to a
safety examination in accord-
ance with the „Accident Preven-
tion Regulations for Working
with Liquid Spray Jet Devices“
as required, but at least every
12 months, by an authorised
inspector.
Never spray electrical equip-
ment with water: risk of elect-
trical shock and short-circuit.
Do not clean delicate parts
made of rubber, fabric, etc. with
the 0° jet. Keep some distance
between high pressure nozzle
and surface in order to prevent
the surface from damage.
The cleaner may only be con-
nected to a correctly installed
plug socket.
Switching on the cleaner may
cause voltage fluctuations.
Voltage fluctuations should not
occur if the impedance at the
transfer point is less than 0.15:ꢀꢁ
If in doubt ask your local electric-
ity supplier.
Do not use the high-pressure
hose for lifting loads.
NOTE!
After all repairs or modifications
to electrical equipment, the pro-
tective conductor resistance, the
insulation resistance and the leak-
age current must be measured.
Furthermore, a visual inspection
of the mains power lead, a volt-
age and current measurement
and a function test must be car-
ried out. Our after-sales service
technicians are at your disposal
as authorised inspectors.
The maximum permissible work-
ing pressure and temperature
are printed on the high-pressure
hose.
Maintenance and repair
Do not use the cleaner if the
power cord or high-pressure
hose is damaged.
CAUTION!
Always remove the plug from
the power supply before clean-
ing or carrying out mainte-
nance work on the cleaner.
Ensure adequate air circulation.
Do not cover the cleaner or oper-
ate it in inadequately ventilated
rooms!
The complete „Accident Preven-
tion Regulations for Working
with Liquid Spray Jet Devices“
are available from the Carl Hey-
manns Verlag KG, Luxemburger
Strasse 449, 50939 Cologne or
Carry out only the maintenance
operations described in the op-
erating instructions. Use only
original Nilfisk-Alto spare parts.
Store the cleaner where
it will not be exposed
to frost!
1) Accessories / model variants
5
Download from Www.Somanuals.com. All Manuals Search And Download.
NEPTUNE E
english
Safety devices
Level monitoring in the boiler
If the water level in the boiler
sinks under a certain level, the
equipment is switched off. The
boiler is protected against over-
heating. The pump is protected
against water shortage.
from the appropriate associa-
tion of employers’ liability insur-
ances.
Unloadar valve
Pump pressure is reduced by
means of an "unloader valve"
which returns water to the inlet
side of the pump at a minimum
pressure.
The pressure-bearing parts of
this high-pressure cleaner have
been manufactured in accord-
ance with § 9 of the German
Pressure Vessels Ordinance
and successfully subjected to a
pressure test.
The safety devices are set and
sealed at the factory and must
not be adjusted.
Safety temperature limiter
When exceeding max. permis-
sible water temperature in the
boiler the heating is completely
switched off.
2 Description
2.1 Purpose
This high-pressure cleaner has Chapter 5 describes the use of
been designed for professional the high-pressure cleaner for
use in
various cleaning jobs.
Always use the cleaner as
described in these operating
instructions. Any other use may
damage the cleaner or the sur-
face to be cleaned or may result
in severe injury to persons.
–
–
–
–
–
–
–
–
Agriculture
Industry
Transport industry
Automotive
Municipal Facilities
Janitorial
Construction
Food Industry
etc.
2.2 Operating elements
1
2
3
4
5
Spray lance
Spray lance storage
Control panel
Detergent level gauge
Tank filler for detergent A
12 Boiler heating operating
13 Working temperature
reached
14 Service interval due/expired
15 Pump oil low
16 Detergent metering knob
17 Pressure gauge
18 Power ON
19 Castor with parking brake
20 Water supply connection
21 Canister for detergent B1)
22 Grip for top cover
6
7
8
Top cover release
Service door release
High pressure hose con-
nection
9
Main switch ON/OFF
ꢀ
10 Display (Temperature or
Codes)
See fold-out page at front of these
operating instructions.
11 Temperature control
1) Accessories / model variants
6
Download from Www.Somanuals.com. All Manuals Search And Download.
NEPTUNE E
english
3 Before starting the cleaner
3.1 Transport and
assembly
1. The safest way to lift the ma- CAUTION!
chine is to use a fork-lift truck Do not hold the plastic tank to lift
The arrows in the illustration the machine as it could become
indicate the best places to po- detached from the frame.
sition the fork.
2. It is also possible to lift the The best places to hold the ma-
machine by hand from the pal-
let. Due to the weight this work
should be done by at least
three persons.
chine are
on the handle
on the frame between the front
wheels and the guide rollers.
–
–
3.2 Set the brake
1. Before using the cleaner for
the first time, check it carefully
for any faults or damage.
2. Run the machine only when
it is in perfect working condi-
tion.
3. Set the brake.
3.3 Fill up detergent tanks
1. Fill up detergent tanks (A)
and (B)1) with prediluted de-
tergent.
Capacity see chapter 9.3
Technical Data
30
10
02
35
2
A
B
3.4 Connecting the high
pressure hose
1. Connect the high pressure
hose quick connector to the
high pressure nipple.
1) Accessories / model variants
7
Download from Www.Somanuals.com. All Manuals Search And Download.
NEPTUNE E
english
1. Attach quick connect adapter
found with Owners Manual to
the water supply hose.
3.5 Connecting the water
supply
2. Rinse the water supply hose
briefly in order to prevent sand
an other dirt particles entering
into the machine.
3. Attach water supply hose with
adapter to inlet quick connec-
tor.
ꢀ
In the case of poor water quality
(sand, etc.), it is recommended that
an inlet water filter be installed.
4. Open water supply faucet.
NOTE!
See chapter 9.3 Technical Data for
required quantity of water and water
pressure.
Water supply hose should be a re-
inforced hose and have a minimum
inside diameter of 3/4" (19 mm).
3.6 Electrical connection
CAUTION!
1. Observe specifications in
chapter 9.3.
2. Observe safety instructions in
chapter 1.
The cleaner should only be con-
nected to a correctly installed
electrical supply.
3. Insert the plug into the electri-
cal socket.
3.7 Antifreeze - before first
use
The machine is flushed with anti- prox. 3 l) may be captured in a
freeze at the factory to protect it
against freezin; this mixture (ap-
suitable container for reuse.
4 Control / Operation
4.1 Connecting the spray
lance to the spray gun
1. Pull the blue quick-release
grip (A) of the spray gun for-
wards and lock it by turning it
to the left.
A
2. Insert the nipple of the spray
lance (C) into the quick-re-
lease connection and turn
the blue quick-release grip to
the right (B).
C
ꢀ
B
NOTE!
Always remove any dirt from the
nipple before connecting the spray
lance to the spray gun.
3. Pull the spray lance (or other
accessory) forwards to check
that it is securely attached to
the spray gun.
1) Accessories / model variants
8
Download from Www.Somanuals.com. All Manuals Search And Download.
NEPTUNE E
english
4.2 Switching on the
cleaner
1. Turn the main switch to posi-
tion
Control electronics accomplishes
a self check.
The Display shows for approx. 1
second „---“.
The motor starts.
B
.
A
60
ꢀ
Automatic temperature control
The electronically controlled mix-
ing valve regulates the preselected
work temperature, while sufficiently
hot water is in the boiler. If the water
temperature in the boiler drops un-
der the preselected work tempera-
is ON.
Cold water operation:
2. Turn temperture selector
switch (A) fully anticlockwise.
3. Turn the main switch (B) to
ture, the indicator lamp
out.
goes
Working
temperature
position
.
NEPTUNE
1. Wait until the boiler has heated
the water to preselected tem-
perature (the indicator lamp
blinks during heating-up).
or:
2. Operate the machine with lower
than preselected working tem-
perature.
E 12
E 24
34°C
46°C
Hot water operation:
2. Turn temperature selector
switch (A) to desired water
temperature.
The specified values refer to a water
inlet temperature of 12°C. If warmer
water is supplied (permissible up
to max. 70°C) higher values are
reached.
The indication lamp
blinks during water is heated.
If water has reached the
preselected temperature, the
indication lamp
3. Turn the main switch (B) to
position
During continuous operation the
work temperature oscillates itself on
the following values:
lights.
.
4. Unlock the spray gun and
squeeze trigger.
5. Lock the spray gun even dur-
ing short working pauses.
ꢀ
The cleaner switches off automati-
cally twenty seconds after the spray
gun has been closed. To start the
cleaner again, squeeze the trigger
and the machine will start automati-
cally.
1. Select desired detergent (A)
or (B) and amount by turning
the knob to desired percent-
age.
2. Spray the object to be
cleaned.
4.3 Using cleaning agents
1%
1%
3%
3%
3. Allow the cleaning agent to
work, depending on the de-
gree of soiling. Then rinse off
with high pressure.
5%
ca.
5%
ca.
30
10
02
35
2
A
B
NOTE!
The percentage shown in the illus-
tration are only approximate data.
using a graduated measuring con-
tainer. For water outlet volume of
the machine see chapter 9.3 techni-
cal data.
Never allow clean-
ing agent to dry on
the surface to be
cleaned. The sur-
face may be dam-
For special applications such as dis-
infection, the exact detergent con-
centration has to be determined by
,
aged.
1) Accessories / model variants
9
Download from Www.Somanuals.com. All Manuals Search And Download.
NEPTUNE E
english
5 Applications and methods
5.1 Techniques
Efficient high pressure cleaning is achieved by following a few guide-
lines, combined with your own personal experience of specific clean-
ing tasks. Accessories and detergents, when correctly chosen, can
increase the efficiency of your pressure washer. Here is some basic
information about cleaning.
Encrusted or thick layers of dirt can be loosened or softened up by a
period of soaking.This is for example an ideal method within agricul-
ture – for example, within pig sties.The ideal soaking method can be
achieved by using foam or simple alkaline detergent. Let the product
lie on the dirty surfaces for about 30 minutes before pressure washing.
The result will be a much quicker high pressure cleaning process.
5.1.1 Soaking
Foam or detergent should be applied onto dry surfaces so that the
chemical product is in direct contact with the dirt. Detergents are ap-
plied from bottom to top, for example on a automobile bodywork, in
order to avoid “super clean” areas, where the detergent may collect
in higher concentrations and streams downwards. Let the detergent
work for several minutes before rinsing before rinsing and never let
it dry on the surface being cleaned.
5.1.2 Detergent and Foam
5.1.3 Temperature
Detergents are more effective at higher temperatures. Greases, oils
and fats can be broken down more effectively at higher temperatures
also.Proteins can be cleaned at temperatures of around 60°C (140°F).
Oils and traffic film around 70°C (158°F), and grease can be cleaned
at 80°-90°C (176-194°F).
5.1.4 Mechanical Effect
In order to break down tough layers of dirt, additional mechanical
effect may be required. Special lances and rotary or wash brushes
offer this supplementary effect that cuts through dirt.
5.1.5 High Water Flow or
High Pressure
High pressure is not always the best solution and may also damage
surfaces. The cleaning effect also depends upon water flow. Pres-
sure levels of around 100 bar (1450 psi) may be sufficient for vehicle
cleaning (in association with hot water) and higher flow levels give
the ability to rinse and flush away large amounts of dirt easily.
1) Accessories / model variants
10
Download from Www.Somanuals.com. All Manuals Search And Download.
NEPTUNE E
english
5.2 Some typical cleaning tasks
5.2.1 Agriculture
Task
Accessories
Method
Stables
Pig Pens, Sties
Chemical Foam
Injectors
1. Soaking – apply foam to all surfaces (bottom to top)
and wait for approx. 30 minutes.
Foam lance
Powerspeed lance
Floor Cleaner
2. Remove the dirt from surfaces with the high pressure
lance or chosen accessory. Again, clean from bottom
to top on vertical surfaces.
Cleaning of
walls, floors and
equipment
3. To flush away large quantities of dirt, change to low
pressure mode and use the higher flow to push away
the dirt.
4. Use recommended disinfectant products and methods
to ensure hygiene. Apply DES 3000 disinfectant once
the surfaces are perfectly clean.
Detergents
Universal
Alkafoam
Disinfectant
Disinfectant
DES 3000
Machinery
Tractors
ploughs etc.
Detergent injection
Powerspeed lances
Curved lances and
underchassis washers
Brushes
1. Apply detergent to vehicle or equipment surfaces in
order to soften up dirt and grime. Apply from bottom
to top.
2. Proceed with cleaning using the high pressure lance.
Clean again from bottom to top. Use accessories to
clean in difficult to reach places.
3. Clean fragile areas such as motors, rubber at lower
pressure levels to avoid damage.
5.2.2 Vehicle
Task
Accessories
Method
Vehicle bodywork
Standard lance
Detergent injection
Curved lances and
underchassis washers
brushes
1. Apply detergent to vehicle or equipment surfaces in
order to soften up dirt and grime. Apply from bottom
to top.In cases of particularly dirty vehicles, pre-spray
with a product such as Allosil in order to remove traces
of insects etc, then rinse at low pressure and apply
normal car cleaning detergent. Let detergents settle
for 5 minutes before cleaning off.Metallic surfaces can
be cleaned using RimTop.
2. Proceed with cleaning using the high pressure lance.
Clean again from bottom to top. Use accessories to
clean in difficult to reach places. Use brushes in order
to add a mechanical cleaning effect.Short lances can
help for cleaning of motors and wheel arches. Curved
lances or undercarriage washers can be valuable for
the cleaning of car underchassis and wheel arches.
3. Clean fragile areas such as motors, rubber at lower
pressure levels to avoid damage.
Detergents
Aktive Shampoo
Aktive Foam
Sapphire
Super Plus
Aktive Wax
Allosil
RimTop
4. Apply a liquid wax using the pressure washer in order
to protect the bodywork from pollution.
1) Accessories / model variants
11
Download from Www.Somanuals.com. All Manuals Search And Download.
NEPTUNE E
english
5.2.3 Buildings and Equipment
Task
Accessories
Method
General surfaces
Foam injectors
Standard lance
Curved lances
Tank cleaning
head
1. Apply thick foam over the surfaces to be cleaned. Ap-
ply on dry surfaces. Apply from top to bottom on ver-
tical surfaces. Let the foam act for up to 30 minutes
for the optimal effect.
2. Proceed with cleaning using the high pressure lance.
Use applicable accessories. Use high pressure to
dislodge large amounts of incrusted dirt or grime.
Use lower pressure and high water volume in order
to rapidly flush away loose dirt and rinse surfaces.
3. Apply DES 3000 disinfectant once the surfaces are
perfectly clean.
Metallic equipment
Detergents
Intensive
J25 Multi
Combi Aktive
Alkafoam
Areas covered by amounts of loose dirt, such as animal
remains in slaughterhouses, can be removed by using
high water flow to flush away the dirt to evacuation pits
or drains.
Disinfectant
DES 3000
Tank cleaning heads can be used to clean barrels, vats,
mixing tanks etc. Cleaning heads may be hydraulically
or electrically powered and give the possibility for auto-
matic cleaning without a constant user.
Rusted or
damages surfaces equipment
prior to treatment
Wet Sandblasting
1. Connect the sandblasting lance to the pressure
washer and place the suction tube in the sand.
2. Always wear protective equipment during sandblast-
ing.
3. Spray the surfaces to be treated with the mix of water
and sand. Rust, paint etc will be stripped off.
These are merely several examples of cleaning tasks that can be solved by a pressure washer in asso-
ciation with accessories and detergents. Each cleaning task is different. Please consult your local dealer
or Nilfisk-Alto representative in order to discuss the best solution for your own cleaning tasks.
6 After using the cleaner
6.1 Switching off the
cleaner
1. Turn the main switch to posi-
tion „OFF“.
2. Turn off water supply at
faucet.
3. Squeeze the spray gun trig-
ger until the pressure has bled
off.
4. Slide trigger lock to the locked
position.
6.2 Disconnecting supply
lines
1. Turn off water supply at
faucet.
2. Remove the water supply
hose from the cleaner.
carefully roll up the power
cord and the high pressure
hose.
6. To prevent accidents, always
6.3 Storing the cleaner
(below 0°C (32°F))
1. Store the cleaner in a dry
heated location to protect
against freezing.
1) Accessories / model variants
12
Download from Www.Somanuals.com. All Manuals Search And Download.
NEPTUNE E
english
7 Maintenance
7.1 Maintenance Schedule
Every six
After the first 50
operating hours
months or
500 operating required
hours
As
Weekly
Q
7.2.1 Water filters
Q
7.2.2 Checking the pump oil quality
7.2.3 Changing the pump oil
Q
Q
7.2 Maintenance work
7.2.1 Water filters
Water filters are fitted at the water
and pump inlets to prevent large
particles of dirt from entering into
the system.
1. Unscrew quick coupling.
2. Remove filter with tool and
clean it.
3. Also clean filter at pump in-
let.
7.2.2 Checking the pump oil
quality
1. Check color of pump oil.
If the oil has a grey or white
shade, change the oil (see
chapter 7.2.3)
2. Top off oil level with fresh oil
if necessary.
Oil type see chapter 9.3
Technical Data.
1) Accessories / model variants
13
Download from Www.Somanuals.com. All Manuals Search And Download.
NEPTUNE E
english
7.2.3 Changing the pump oil
1. Unscrew the oil drain plug (A)
and drain oil into a suitable
container.
2. Check that the drain plug
gasket is in place and reinstall
drain plug.
3. Fill pump with proper grade
and amount of oil.
Oil grade and capacity see
A
chapter ‘9.3 Technical Data’.
8 Troubleshooting
8.1 Indications on Display
Anzeige am
Ursache
Behebung
Display
>
Motor overheated
Boiler overheated
•
•
•
Turn main switch in position „OFF“, let ma-
chine cool down
Hop
Possible phase failure; have electrical con-
nections checked
>
>
Let appliance cool down; if the failure
comes up repeatedly, contact Nilfisk-Alto-
Service, cold water operation possible
HOS
LEA
Leakage
•
Turn main switch to position “OFF“, then
start again.
>
>
Spray gun leaking
Repair Spray gun
•
•
High pressure hose, coupling or line
system leaking
Replace high-pressure hose, retighten
screw fittings
>
Detergent tank empty
•
Fill detergent tank or set detergent meter-
ing to „OFF“
>
>
>
Water inlet filter dirty
Clean filter (see chapter 7.2.1)
Repair leaks
•
•
•
High-pressure pump drawing in air
No water in the boiler
Check water inlet
LLH
LLP
>
Water supply turned off or inadequate
supply to machine
•
•
Required volume flow and pressure see
chapter 9.3 Technical Data
>
>
Pump oil low
Fill to proper level (see chapter 7.2.2)
POL
Temperature sensor damaged
Contact Nilfisk-Alto Service
Cold water operation possible
S1C, S2C,
S10, S20
UPC
>
Microprocessor failure
Contact Nilfisk-Alto Service
1) Accessories / model variants
14
Download from Www.Somanuals.com. All Manuals Search And Download.
NEPTUNE E
english
8.2 Indication lights on control panel
Indication light
Cause
Remedy
see LLP
>
>
•
•
flashing
flashing
see LLP
Boiler operating
Normal operation
>
>
Water has reached preselected
temperature
Service interval: Service due in
20 hours
•
Normal operation
ON
flashing
ON
Contact Nilfisk-Alto Service
>
>
Service interval expired
Pump oil low
Contact Nilfisk-Alto Service
Fill to proper level
•
ON
8.3 Other Faults
Fault
Cause
Remedy
>
Power cord not properly
connected to power supply
•
Check power cord connetction
not ON
•
•
Check fuse (see chapter 9.3 Technical Data)
Replace nozzle
Pressure too low
>
>
>
High pressure nozzle worn
out
Detergent tank empty
•
•
Fill detergent tank or set detergent metering
to „OFF“
Machine is running with
pulsating pressure and
makes knocking noise
Pump has drawn in air due
to detergent tank being
empty
Close detergent valve. Remove lance from gun.
Operate spray gun and let machine run until
air in pump is gone and the machine is running
normally/calm again.
No detergents drawn in
>
>
>
Detergent tank empty
Dirt in detergent tank
•
•
•
Fill detergent tank
Clean detergent tank
Suction valve at cleaning
agent inlet soiled
Remove suction valve and clean or replace
9 Further information
9.1 Recycling the cleaner
Make the old cleaner unusable As specified in European Direc-
immediately. tive 2002/96/EC on old electrical
1. Unplug the cleaner and cut and electronic appliances, used
the power cord. electrical goods must be col-
Do not discard of electrical ap- lected separately and recycled
pliances with household waste.
ecologically.
Contact your local authorities or
your nearest dealer for further
information.
1) Accessories / model variants
15
Download from Www.Somanuals.com. All Manuals Search And Download.
NEPTUNE E
english
9.2 Guarantee
Our general conditions of busi- The guarantee is invalidated if the
ness are applicable with regard machine is not operated in ac-
to the guarantee. Subject to cordance with these instructions
change as a result of technical or otherwise abused.The guaran-
advances.
tee is invalidated if the machine is
not serviced as described.
9.3 Technical data
NEPTUNE
E 12
EU
25
E24
EU
50
Voltage 400 V
Fuse (slow)
/ 3~/ 50Hz
A
kW
16
28
Power rating
kW
12
24
Heating
bar/MPa
bar/MPa
l/h
l/h
°C
°C
bar/MPa
mm
150/15
250/25
750
720
80
70
10/1
Working pressure
Permissible pressure
Volume flow (max)
Volume flow QIEC
Permissible temperature
Max. water inlet temperature
Max. water inlet pressure
Dimensions l x w x h
Weight
1150 x 702 x 987
134,5
kg
131,5
dB(A)
70,4
Noise level at a distance of 1 m EN
60704-1
dB(A)
m/s²
85,4
<2,5
Sound power level LWA
Vibration
N
l
36
74
Recoil forces
Boiler
l
35 / 10
1,0
Detergent tank A / B
Oil quantity
l
SAE 15W-40
Oil type
9.4 EU Declaration of
Conformity
EU Declaration of Conformity
Product:
Type:
High Pressure Cleaner
NEPTUNE E
Description:
400 V 3~, 50 Hz, IP X5
The design of the unit corresponds to the EC Machine Directive 98/37/EC
following pertinent regulations:
EC Low-voltage Directive 73/23/EC
EC EMC Directive 2004/108/EC
Applied harmonised standards:
EN 12100-1, EN 12100-2, EN 60335-2-79
EN 55014-1, EN 55014-2, EN 61000-3-2
Applied national standards and technical DIN EN 60335-2-79
specifications:
ALTO Deutschland GmbH
Guido-Oberdorfer-Straße 2-8
D-89287 Bellenberg
Dipl. Ing. Wolfgang Nieuwkamp
Tests and approvals
Bellenberg, 18.04.2005
1) Accessories / model variants
16
Download from Www.Somanuals.com. All Manuals Search And Download.
FRANCE
1266 Oslo
Nilfisk-ALTO
Norway
ALTO France SA
Aéroparc 1
Tel.: (+47) 22 75 17 70
Fax: (+47) 22 75 17 71
E-mail: [email protected]
19 rue Icare
67960 Entzheim
France
Tel.: (+33) 3 88 28 84 00
Fax: (+33) 3 88 30 05 00
E-mail: info@nilfisk-alto-fr
PORTUGAL
Nilfisk-ALTO
Division of Nilfisk-Advance Lda.
Sintra Business Park
Zona Industrial Da Abrunheira
HEADQUARTER
DENMARK
GERMANY
Edificio 1, 1o
A
Nilfisk-Advance Group
Sognevej 25
Nilfisk-Advance AG
P-2710-089 Sintra
Nilfisk-ALTO Business Unit
Guido-Oberdorfer-Str. 10
89287 Bellenberg
Tel.: (+35) 808 200 537
Fax: (+35) 121 911 2679
E-mail: [email protected]
2605 Brøndby
Denmark
Germany
Tel.: (+45) 43 23 81 00
Fax: (+45) 43 43 77 00
E-mail: [email protected]
Tel.: (+49) (0) 180 5 37 37 37
Fax: (+49) (0) 180 5 37 37 38
E-mail: [email protected]
SINGAPORE
Nilfisk-Advance Pte. Ltd.
Nilfisk-ALTO Division
40 Loyang Drive
SALES COMPANIES
HOLLAND
Nilfisk-ALTO
Division of Nilfisk-Advance BV
Camerastraat 9
NL-1322 BB Almere
Tel.: (+31) 36 5460 760
Fax: (+31) 36 5460 761
E-mail: [email protected]
AUSTRALIA
Nilfisk-ALTO
Singapore 508961
48 Egerton St.
Tel.: (+65) 6 759 9100
Fax: (+65) 6 759 9133
PO box 6046
Silverwater NSW 2128
Australia
Tel.: (+61) 2 8748 5966
Fax: (+61) 2 8748 5960
SPAIN
Nilfisk-ALTO
Division of Nilfisk-Advance S.A.
Torre DAra
AUSTRIA
Nilfisk-Advance GmbH.
Nilfisk-ALTO
HONG KONG
Nilfisk-Advance Ltd.
2001 HK Worsted Mills Ind'l Bldg.,
31-39 Wo Tong Tsui St.
Kwai Chung, Hong Kong
Tel.: (+852) 2427 5951
Fax: (+852) 2487 5828
Paseo del Rengle, 5 Pl. 10
E-08302 Mataró
Metzgerstrasse 68
Tel.: (+34) 902 200 201
Fax: (+34) 93 757 8020
E-mail: [email protected]
A-5101 Bergheim bei Salzburg
Tel.: (+43) 662 456 400-0
Fax: (+43) 662 456 400-34
E-mail: [email protected]
SWEDEN
HUNGARY
ALTO Sverige AB
BRASIL
Kvantor-Itb Kft
Member of Nilfisk-Advance Group
Aminogatan 18, Box 4029
S-431 04 Mölndal
II. Rákóczi Ferenc út 10
2310 Szigetszentmiklos-Lakihegy
Hungary
Wap do Brasil Ltda.
Rua das Palmeiras, 350
Capela Velha
Sweden
Tel.: (+36) 24 47 55 50
Fax: (+36) 24 47 55 51
E-mail: [email protected]
Tel.: (+46) 31 706 73 00
Fax: (+46) 31 706 73 40
E-mail: [email protected]
83.705-500 – Araucária - PR
Brasil
Tel.: (+55) 41 2106 7400
Fax: (+55) 41 2106 7403
E-mail: [email protected]
JAPAN
Nilfisk-Advance, Inc.
1-6-6 Kita-shinyokohama, Kouhoku-ku,
Yokohama, 223-0059
Japan
TAIWAN
Nilfisk-Advance Ltd.
Taiwan Branch (H.K.)
1F, No. 193, Sec.2
Xing Long Rd., Taipei
Taiwan, R.O.C.
CANADA
ALTO Canada
24 Constellation Road
Rexdale
Tel.: (+81) 45 548 2571
Fax: (+81) 45 548 2541
Ontario M9W 1K1
Canada
Tel.: (+886) 2 2239 8812
Fax: (+886) 2 2239 8832
MALAYSIA
Nilfisk-Advance Sdn Bhd
No. 1011, Block A4
Leisure Commerce Square
No. 9, Jalan PJS 8/9
46150 Petaling Jaya
Selangor, Malaysia
Tel.: (+60) 3 603 7876 4222
Fax: (+60) 3 603 7876 3878
Tel.: (+1) 416 675 5830
Fax: (+1) 416 675 6989
THAILAND
CZECH REPUBLIC
ALTO Ceskà republika s.r.o.
Zateckých 9
14000 Praha 4
Czech Republic
Tel.: (+420) 24 14 08 419
Fax: (+420) 24 14 08 439
E-mail: [email protected]
Nilfisk-Advance Co. Ltd.
89 Soi Chokechai-Ruammitr
Viphavadee-Rangsit Road
Ladyao, Jatuchak, Bangkok 10900
Thailand
Tel.: (+66) 2 275 5630
Fax: (+66) 2 691 4079
PEOPLE’S REPUBLIC OF CHINA
Nilfisk-Advance (Shenzhen) Ltd
Blok 3, Unit 130, 1001 Honghua Road
Int. Commercial & Trade Center
Fuitian Free Trade Zone
UNITED KINGDOM
DENMARK
Nilfisk-ALTO
Nilfisk-ALTO
Division of Nilfisk-Advance Ltd.
Bowerbank Way
Division of Nilfisk-Advance A/S
Industrivej 1
518038 Shenzhen
Gilwilly Industrial Estate
Penrith Cumbria CA11 9BQ
Great Britain
9560 Hadsund
P.R. China
Denmark
Tel.: (+86) 755 8359 7937
Fax: (+86) 755 8359 1063
Tel.: (+45) 72 18 21 00
Fax: (+45) 72 18 21 11
E-mail: [email protected]
E-mail: [email protected]
Tel.: (+44) (0) 1768 868995
Fax: (+44) (0) 1768 864713
E-mail: [email protected]
POLAND
Nilfisk-ALTO
Division of Nilfisk-Advance A/S
05-800 Pruszków
ul. 3-go MAJA 8
USA
Nilfisk-ALTO Food Division
Division of Nilfisk-Advance A/S
Blytækkervej 2,
ALTO Cleaning Systems Inc.
Part of the Nilfisk-Advance Group
12249 Nations Ford Road
Pineville, NC 28134
USA
Poland
9000 Aalborg
Tel.: (+48) 22 738 37 50
Fax: (+48) 22 738 37 51
Denmark
Tel.: (+45) 72 18 21 00
Fax: (+45) 72 18 20 99
E-mail: [email protected]
Tel.: (+1) 704 971 1240
Fax: (+1) 704 971 1241
E-mail: [email protected]
NORWAY
ALTO Norge AS
Download from Www.BSjøormnearunduveaielsn.2c4om. All Manuals Search And Download.
|