Niles Audio Speaker System NS IW560C User Manual

NS-IW560C  
HOME CINEMA IN-CEILING SPEAKER  
CONTENTS  
CONSUMER PRECAUTIONS ........................................................................... 2  
UNPACKING ...................................................................................................... 3  
TOOLS NEEDED ............................................................................................... 3  
SPEAKER PLACEMENT ....................................................................................3  
INSTALLATION ..................................................................................................4  
CONNECTIONS .................................................................................................6  
PAINTING THE SPEAKER FRAME AND GRILL ...............................................7  
SPECIFICATIONS ..............................................................................................7  
WARRANTY ....................................................................................... Back cover  
OWNER’S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UNPACKING  
After unpacking, check that the following items are contained.  
10-9/32”  
9-7/16”  
4-3/32”  
TEMPLATE  
NS-IW560C  
Speaker System x2  
Cutout  
template x1  
Speaker  
Grill x2  
Paint Protective  
Cover x2  
Glue Strips x2  
TOOLS NEEDED  
Drill  
Wire strippers  
Gloves  
Drywall saw  
Pencil  
Safety goggles  
Sturdy wire  
(such as a coat hanger)  
Philips screwdriver  
SPEAKER PLACEMENT  
These speakers are not magnetically shielded. Avoid installing the speakers too close to your TV.  
Home Theater  
Stereo  
Use these speakers for left and right surround  
channels. Surround speakers should ideally be placed  
behind the listening area, at least as far apart as the  
front speakers and up to 2 additional feet apart per  
side.  
For best stereo performance, install the left and right  
speakers at equal distance from the listening position.  
Each speaker should be separated by a distance of 6-  
10 ft.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION  
Before installation, check to ensure that the area you are installing the speaker is free of any ceiling joints, by  
tapping the ceiling or using a stud finder.  
If you wish to paint the speaker frame and grill, please refer to page 7 “PAINTING THE SPEAKER FRAME AND  
GRILL” before proceeding.  
1
2
3
Position the cutout template where you are  
installing the speaker. Then trace around the  
template with a pencil.  
4
Cut the ceiling along the outline you traced.  
TEMPLATE  
5
Run high quality speaker cable from your  
receiver to your speakers. Leave a few extra feet  
of cable.  
Drill a pilot hole in the center outline you traced.  
Note:  
You can insulate the cavity by placing a sheet of  
fiberglass insulation around the speaker  
components to improve speaker performance.  
Insert the bent coat hanger wire into the hole.  
Then slowly rotate to check for any obstruction. If  
there is any obstruction, patch the hole and  
select another location.  
360°  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
Connect the speaker cable to the speaker and  
your receiver. Please refer to page 6,  
“CONNECTIONS” section for detailed  
instructions.  
9
Attach the grill to the frame.  
Glue strips  
7
Place the speaker into the ceiling.  
Note:  
For secure grill attachment, application of the  
supplied glue strips is recommended.  
Recommended Glue Strip Location  
8
Tighten each of the four screws evenly until the  
clamps at the back of the frame grip the ceiling  
to secure the speaker.  
Note:  
You can swivel the tweeter to direct high  
frequency sounds precisely toward the listening  
position by gently pressing the outer edge of the  
tweeter mount.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTIONS  
• Connect the push-type input terminals at the rear of the speakers to the speaker output terminals of the  
receiver.  
• Connect the (+) terminals on the receiver and speakers using the corresponding side of the cable. Connect  
the (−) terminals on both components using the other side of the cable.  
NS-IW560C  
Receiver  
+ −  
+
Notes:  
• Make sure that the bare wires are not touching each other as this could damage the speaker and receiver.  
• Connect one speaker to the left terminals of your receiver, and another speaker to the right terminals,  
making sure no to reverse the polarity (+, −). If one speaker is connected with reversed polarity, the sound  
will be unnatural and lack bass.  
How to connect  
When using a banana plug  
1 Press and hold down the speaker terminal.  
2 Insert the bare wire. Remove the insulation  
coating at the extremity of each speaker cable  
by twisting the coating off.  
1 Insert the banana plug into the top of the  
terminal as shown below:  
3 Release the terminal. Test the firmness of the  
connection by pulling lightly on the cable at the  
terminal.  
Banana plug  
1
1
Black (−)  
Red (+)  
2
(−)  
(+)  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
PAINTING THE SPEAKER FRAME AND GRILL  
The speaker frame and grill can be painted to match your room décor. Use high quality spray paint and select a  
well ventilated area before proceeding.  
Painting the frame  
Painting the grill  
1 Remove the speaker from the ceiling if it is already  
installed. Also, remove the grill from the baffle.  
2 Mask the speaker components and the baffle with  
the supplied paint protective cover.  
1 Carefully remove the grill from the speaker, if  
attached.  
2 Apply the paint to the grill. Make sure that the grill  
holes remain free of paint. Clogging the holes with  
paint may diminish the sound quality.  
3 Apply the paint to the frame.  
Paint protective  
cover  
Speaker Grill  
SPECIFICATIONS  
Speaker  
8” woofer Kevlar cone x 1 , 1” Titanium dome tweeter  
Frequency Range  
Impedance  
45 Hz - 28 KHz  
8 ohms  
Nominal lnput  
50 W  
Maximum lnput  
Sensitivity (dB/2.83v. 1m)  
Crossover Frequency  
Dimension (Diameter x Depth)  
(Mounting depth)  
Weight  
150 W  
88 dB  
6,000 Hz  
10-9/32” x 4-13/32” (with grille) (261 x 111.6 mm)  
3-23/32” (94.3 mm)  
4.5 lbs (2.05Kg)  
No  
Magnetic Shielding  
*Specifications subject to change without notioe due to product improvements.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
YAMAHA Electronics Corporation, USA, is proud of the experienced craftsmanship that goes into each and every YAMAHA Loudspeaker. YAMAHA sells  
its products only through a network of high quality, specially authorized dealers and is pleased to offer the following Limited Warranty, which applies only  
to products purchased by consumers directly from our authorized dealers. We suggest that you read the Limited Warranty thoroughly, and invite you to  
contact your authorized YAMAHA dealer or the YAMAHA Electronics Corporation, USA, Service Department if you have any questions.  
SPEAKER SYSTEMS LIMITED WARRANTY  
Duration of Warranty:  
Yamaha Loudspeakers are covered by this warranty for a period of 2 years from date of purchase.  
What is Covered and what is Not Covered:  
This warranty covers all defects in materials or workmanship, but DOES NOT COVER the following:  
(1) Damage, deterioration or malfunction resulting from:  
a. Accident, negligence, misuse, abuse, improper installation or operation or failure to follow instructions contained in your Owner’s Manual.  
b. Any shipment of the product. (Claims must be presented to the carrier.)  
c. Repair or attempted repair by anyone other than YAMAHA or a specially authorized YAMAHA Service Center.  
(2) Any unit which has been altered, or on which the serial number or cabinet has been defaced, modified or removed.  
(3) Consequential, economic or property damage.  
(4) Normal wear and maintenance.  
(5) Initial setup or check-ups with ho defects found.  
(6) Labor & materials required to remove and reinstall the loudspeaker.  
(7) Any unit which has not been purchased by the consumer directly from an authorized YAMAHA dealer in the USA or Puerto Rico. If you are  
uncertain as to whether a dealer has been authorized by YAMAHA, please contact YAMAHA at the telephone number shown below.  
(8) Any unit used for industrial or commercial purposes.  
Who may enforce the warranty:  
This warranty is enforceable only by the original purchaser of the unit, who purchased from a Yamaha dealer authorized to make that sale.  
What we will pay for and what you must pay for”  
YAMAHA will repair or replace products covered by this warranty, without charge to the consumer for labor or materials. Some repair parts may be  
used or rebuilt replacements, that meet or exceed Yamaha specifications for new parts, in exchange for defective parts. YOU ARE RESPONSIBLE  
FOR ANY INSTALLATION OR REMOVAL CHARGES AND FOR ANY INITIAL SHIPPING CHARGES, if the product(s) must be shipped for  
warranty service. However, we will pay the return shipping charges to any destination within the USA if the repairs are covered by the warranty.  
How you can get Warranty Service:  
(1) If your YAMAHA loudspeaker(s) appears to require service, contact the authorized YAMAHA dealer and the dealer will advise you of the  
procedures to be followed. If this is not practical, deliver the defective product(s) to a specially authorized YAMAHA Service Center (obtain  
referrals from the YAMAHA Web site or toll-free YAMAHA phone number shown below).  
(2) Product(s) shipped for service should be packed securely and must be accompanied by a detailed explanation of the problem(s) requiring  
service, as well as your sales receipt or other proof of date and place of purchase, as evidence of warranty coverage.  
(3) Warranty registration is not required for warranty coverage.  
Limitation of Implied Warranties:  
ANY IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE  
LIMITED IN DURATION TO THE LENGTH OF THIS EXPRESS WARRANTY. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG  
AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.  
Exclusion of Damages:  
YAMAHA’S LIABILITY FOR ANY DEFECTIVE PRODUCT IS LIMITED TO REPAIR OR REPLACEMENT OF THE PRODUCT, AT OUR OPTION.  
IF WE ELECT TO REPLACE THE PRODUCT, THE REPLACEMENT MAY BE A RECONDITIONED UNIT. YAMAHA SHALL NOT BE LIABLE FOR  
DAMAGES BASED UPON INCONVENIENCE, LOSS OF USE, DAMAGE TO ANY OTHER EQUIPMENT OR OTHER ITEMS AT THE SITE OF  
USE, OR ANY OTHER DAMAGES WHETHER INCIDENTAL, CONSEQUENTIAL OR OTHERWISE. SOME STATES DO NOT ALLOW  
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS AND/OR DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL  
OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS AND EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES  
YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.  
Should you have any questions about service received or if you need assistance in locating an authorized YAMAHA Service Center, please  
contact:  
SERVICE DEPARTMENT  
YAMAHA Electronics Corporation, USA  
6660 Orangethorpe Avenue, Buena Park,California 90620-1345  
internet URL: www.yamaha.com/yec  
For referral to your nearest authorized YAMAHA Preferred Customer Service Center call 1-800-4YAMAHA.  
Do not return any product to the above address without a written Return Authorization issued by YAMAHA.  
P/N 430051  
Printed in China  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Miele Vacuum Cleaner S179i User Manual
MTD Log Splitter 241 645A User Manual
Multitech Server MTPSR1 202ST User Manual
Nady Systems Car Speaker J 15M User Manual
NordicTrack Home Gym NTTL11993 User Manual
Numark Industries CD Player CDN 32S User Manual
Olympus Camera Lens 261502 User Manual
Opticon Scanner 25 ULGPMU01 01 User Manual
Panasonic Cell Phone EB GD30 User Manual
Patton electronic Network Card 1018RC User Manual