02 ENG
IMPORTANT SAFETY INSTRUCTIONS
N O TICES:
1. Fully charge the Ni-MH battery before using it for the first time or reusing it after
being stored for a long period. It would need 3 to 5 circles of charging and
discharging operations to get the optimum performance of the battery.
2. The surrounding temperature has much to do with the charging efficiency and
O
O
should be between 0 C and 40 C. The charging performance will be in the most
O
O
efficient state from 10 C to 30 C.
3. It is suggested to carry out the actions of charging and discharging the battery
at least every one or two months if the battery is stored for a long time. Fully
recharge it again to be stored. This action can avoid the leakage or the bad
performance of the battery for its self-discharging action.
MOBILE ENTERTAINMENT
CONTENTS
ENG 03
USING THE USB PORT.........................
IMPORTANT SAFETY
INSTRUCTIONS
17
IMPORTANT SAFETY
INSTRUCTIONS.......................................1
DTV MENU
GENERAL STEPS OF SETUP...............19
PACKAGE CONTENTS
DTV CHANNEL
PACKAGE CONTENTS .........................
4
TV CHANNELS
AND RADIO CHANNELS ......................
FAVORITE..............................................
20
PARTS IDENTIFICATION
20
DELETE..................................................
21
22
MOVE.....................................................
MAIN UNIT...............................................
MAIN UNIT CONTROL SECTION...........
5
5
LOCK......................................................
22
MAIN UNIT LEFT SIDE............................
6
MAIN UNIT RIGHT PANEL.......................
7
8
8
DTV CONFIGURATION
MAIN UNIT REAR SIDE...........................
HOW TO STAND......................................
SYSTEM SETTING................................
REMOTE CONTROL...............................
KEY DESCRIPTION
24
9
AUTO SCAN...........................................
29
MANUAL SCAN.....................................
29
OF REMOTE CONTROL........................
10
NOTES ON USING THE
REMOTE CONTROL UNIT......................
11
REPLACING THE BATTERY...................
11
GAME
BOXMAN................................................
30
BURNING TETRIS.................................
HIT RAT..................................................
30
31
ATV CHANNEL
ATV OPERATIONS.................................
13
NOTICES................................................
13
OTHERS
DIMENSION AND PARAMETER............
32
DTV PARTS IDENTIFICATION
SPECIAL KEYS......................................
14
TECHNICAL INFORMATION
TROUBLE SHOOTING..........................
33
USB PLAYBACK
OPERATIONS
MOBILE ENTERTAINMENT
04 ENG
PACKAGE CONTENTS
P A CKAG E C O N TEN TS
After unpacking, first check that all the accessories listed below are included:
AC / DC adapter
Audio and video cables
A
SC
U
A
T
N
O
M
A
N
U
A
L
D
T
V
/
S
O
U
R
C
E
S
C
A
N
R
A
D
I
O
M
E
NU
INFO
T
T
X
CH
F
A
V
-
OK
F
A
V
+
G
AM
E
C
H
E
X
IT
E
P
G
AUDIO
1
4
7
2
3
6
9
L
/R
5
8
0
MU
TE
Z
O
OM
Pr
e-C
H
P/N
F1
F2
F3
F4
SR1O
CATV cable
Remote control
M ODE L N O.
HI-SPEED TV700
OPERATING INSTRUCTIONS
Di
g
i
t
a
l
V
i
d
ti
e
o
B
ro
a
d
c
a
s
n
g
Rec eiver
Operati ng manual
Mini-magnetic Antenna
Exte ndible Antenna
Car power cable
Car bag
NOTES:Actual products' appearance might vary slightly from the pictures shown.
MOBILE ENTERTAINMENT
PARTS IDENTIFICATION
ENG 05
M AI N U N IT
1
2
3
4
1.Liquid crystal display
2.Speakers
3.Control section
Control buttons.
4.Remote control sensor
The remote control signals are received from here.
M AI N U N IT CO N TRO L SEC TIO N
SCAN
MOBILE ENTERTAINMENT
06 ENG
PARTS IDENTIFICATION
1.POWER ON/OFF button
Hold it for about 3 seconds to power on or turn off the unit (Standby status).
2.MODE button
Use the +/- key to adjust the display mode.
CONTRAST: Level 0 to 8.
BRIGHTNESS: Level 0 to 8.
SATURATION: Level 0 to 8.
SCREEN SIZE: Switch screen
between 16:9 and 4:3.
Re v e r s e
Ob v e r s e
DISPLAY MODE: Switch screen between
reverse and observe.
OSD languages: English, French, German, Spanish and Italian.
OSD Timeout : Level 10 to 60.
Transparency: Level 0 to 7.
3.- / + button
Press them to adjust the display MODE.
4.TV /AV IN button
Press it to choose TV /AV IN .
Note: Please choose DVB-T or ATV by using the DVB-T/ATV switch on the
left side.
5.CH- / CH+ button
Press these two buttons respectively to channel down/up.
Press them simultaneously to go to the AUTO SCAN.
M AI N U N IT LEFT SIDE
USB
Digital Video
Receiver
Broadcasting
1
2
3
1. DVB-T/ATV switch: Choose DVB-T or ATV.
2. CATV Jack: Cable TV type aerial input.
3. USB Port: Support USB 1.1.
MOBILE ENTERTAINMENT
PARTS IDENTIFICATION
ENG 07
M AI N U N IT RI G HT PA N EL
1
2
3
4
5
6
7
8
1.DC IN
Connect the included AC adapter here.
2.POWER ON LED INDICATOR
The LED will be green when the unit is on.
3.RECHARGE LED INDICATOR
The LED will be red when the battery is recharging and will be off in
non-recharging state.
4.AUDIO IN/OUT JACK
Input or output audio signals to the connected device by setting the AV IN/OUT
mode value.
The included AV cable is connected here.
5.VIDEO IN/OUT JACK
Input or output video signals to the connected device by setting AV IN/OUT mode
value.
The included AV cable is connected here.
6.EARPHONE JACK
For connecting a stereo earphone or an amplifier.
7.DC OUT
DC OUTPUT.
8.VOLUME CONTROL
Use it to adjust the volume of the speakers or the earphone.
MOBILE ENTERTAINMENT
08 ENG
PARTS IDENTIFICATION
M AI N U N IT REAR SI DE
2
1
1.Support
The unit can stand with this device.
2.Antenna jack
Connect to the antenna.
H O W TO STAN D
1. Pull out the support.
2. Draw out the support to a proper position .
3. Push down the button to lock it.
U
N
L
O
C
K
UNLOCK
LO CK
L
O
C
K
MOBILE ENTERTAINMENT
PARTS IDENTIFICATION
ENG 09
REM O TE CO N TRO L
(10)
(11)
AUTO
SCAN
MANUAL
SCAN
DTV /
RADIO
(12)
(13)
(14)
(1)
SOURCE
MENU
FAV-
(2)
(3)
INFO
FAV+
EPG
TTX
GAME
AUDIO
L/R
CH
(15)
(16)
(4)
(5)
OK
CH
(17)
(6)
(7)
(8)
EXIT
(18)
(19)
3
6
9
1
4
2
5
8
0
(20)
(21)
MUTE
ZOOM
P/N
7
(9)
Pre-CH
(22)
(23)
(24)
(25)
(27)
(26)
F1
F2
F3
F4
SR1O
MOBILE ENTERTAINMENT
10 ENG
PARTS IDENTIFICATION
KEY DESC RIP TIO N O F REM O TE CO N TR O L
1. SOURCE
Press it to choose the DVB-T
/ATV /AV IN.
2. MENU
Press it to show the menu.
3. CH+/UP
16.GAME
Press it to go to the game interface
in DVB-T state.
17.AUDIO
Multi-track selection.
18.EPG
Electronic Program Guide.
19.L/R
Switch the audio channels.
20.MUTE
Audio mute on/off.
21.ZOOM
Press it to change channels up
or move the cursor up.
4. FAV-
Switch to previous favorite
program.
5. FAV+
Zoom the picture on the screen
with the sequence of ZOOM 2,
3, 4,1/2,1/3,1/4 and OFF.
Switch to next favorite
program.
6. EXIT
22.P/N
Output the TV type.
Exit from the current item.
7. CH-/DOWN
23.-/--
Press it to change channels down
or move the cursor down.
Press this button to select channel
numbers of one figure or double digits.
8. DIGITS
24.F1(Red button)
Number keys.
Delete channels in TV channel state.
(During USB files playback: Play or
pause playback key.)
9. Pre-CH
Jump back to the previous
channel.
25.F2(Green button)
Set any channels to be your favorite
in TV channel state.
10.AUTO SCAN
Automatic search.
(During USB files playback: Stop
playback key.)
11.MANUAL SCAN
Manual search.
26.F3(Yellow button)
12.DTV/RADIO
Choose TV program or radio
program.
Move a channel to the appointed
place to rearrange the order of all the
channels in TV channel state.
(During USB files playback: Fast
backward key.)
13.INFO
To display program information.
14.TTX
27.F4(Blue button)
Show the teletext information.
Lock the channel as you wish with a
password in TV channel state.
(During USB files playback: Fast
forward key.)
15.OK
Confirm the selection action.
MOBILE ENTERTAINMENT
PARTS IDENTIFICATION
ENG 11
N O TES O N U SI N G THE REMO TE C O N TRO L U N I T
Do not drop or step on the remote control unit or subject it to shocks.
Note that the remote control unit may not work if there are obstacles between
it and the remote sensor.
Do not expose the remote sensor to strong light. Doing so may make operation
impossible.
Use the remote control unit within the specified operating range.
REP LAC IN G TH E BATTERY
Insert your finger nails into A and
3.Fit the battery holder back to its
1.
place.
B on the diagram below. Press A
according to the direction, then
pull out the battery holder.
A
B
NOTE:
To prevent leakage of fluid from the
lithium battery, remove the battery
when not using the remote control unit
for long periods of time (One month or
more). If the battery leaks fluid,
carefully wipe it out of the battery
case, then change to a new lithium
battery.
Remove the old battery, then
insert the new battery into the
battery holder with the + side
facing upwards.
2.
Caution: The battery may present a
risk of fire if mistreated. Do not
recharge, disassemble, heat above
100 C. Replace battery with same
type.
CR2025
Dispose of used battery properly,
keep away from children and do not
dispose of in fire.
Lithium ba tte ry (CR2025)
MOBILE ENTERTAINMENT
12 ENG
ATV CHANNEL
Press the Menu button on the remote control to bring up the main menu. There are
six items in the menu: Program, Auto Scan, Fine, Skip, Color and Sound. Please use the
and OK buttons to operate the desired item.
MAIN MENU
PROGRAM
AUTO SCAN
PROGRAM SKIP
FING TUNE
COLOR
0
OFF
0
PAL
B/G
SOUND
P RO GRAM
Show the current channel number found.
AU TO SCAN
Scan all the ATV channels and store them automatically.
P RO GRA M SKIP
Shield the current channel by choosing ON. There are two options for your choice :
OFF/ON.
The default is OFF.
FIN E TU N E
Adjust the program conditions.
C O LO R
There are totally two groups of color systems complied with the local condition for
ATV. The either-or system groups are as follows:
1 ) PAL and NTSC.
2 ) PAL and SECAM.
PAL is the default for both system groups.
SO U N D
According to the color system of ATV, select your preferred sound systems:
1) PAL and NTSC.
PAL: D/K, B/G,M/N and I.
NTSC.
2) PAL and SECAM.
PAL: D/K, B/G and I.
SECAM: D/K, B/G and L.
MOBILE ENTERTAINMENT
ENG 13
ATV CHANNEL
ATV O PER ATI O N S
1. Turn on the unit and press the TV / AV IN button to choose the TV mode.
2. Push the DVB-T / ATV switch to choose the ATV antenna setting.
3. The CATV signal will be inputted automatically when the CATV cable is plugged in.
4. Press the AUTO SCAN button to automatically scan ATV channels. All the channels
found will be stored.
5. Press the CH+ button or the CH- button to get the channels you want.
N O TIC ES
1. Make sure this device's ATV system is matched with the territory's situation.
2. Please receive ATV signal with the Extendible Antenna, if using the unit out of doors.
3. In order to receive clearer image, please adjust the length, angle and direction
of the extendible antenna properly.
MOBILE ENTERTAINMENT
14 ENG
DTV PARTS IDENTIFICATION
SPEC IAL KEYS
EPG (Electronic Program Guide)
A quick program guide that the user can easily move up/down to view the
brief description of the selected program.
Press the EXIT button or the EPG button again to exit from this interface.
Electronic Program Guide
Video
08/08/2005
13:00
14:00
15:00
A
B
C
Program List
Program
Description
If the current channel is scrambled, the prompt message "scrambled
channel." will appear on the screen.
Scrambled channel.
L/R
Press this button to change the audio channels at non-menu status.
Ste re o
Stereo
Le ft
Rig ht
MOBILE ENTERTAINMENT
DTV PARTS IDENTIFICATION
ENG 15
MANUAL SCAN
Perform program scanning. (Found programs will be appended to the program list.)
Manual Scan
Scan Type
Scan Type
Start Freq
End Freq
Singl e Scan
170000KHz
890000KHz
6MHz
Band Width
Start Scan
Press OK
Use FAV+/- to select or Press OK to view list
Press EXIT to return
Scan Complete
Channel
1
CH
Strength
Quality
0
0
Frequency
170000KHz
1/1
Progress
TV
:
0000
RA DIO
:
0000
No TV program
No radio program
Press OK to exit
Press EXIT to return
There are 4 items:
Scan Type: Range Scan and Single Scan.
Start Freq: Input the start frequency of your preferred scan range.
End Freq: Input the end frequency of your preferred scan range.
Band Width: 6MHz, 7MHz and 8MHz.
You can use
buttons to select the options with your actual need.
Press OK to start scanning.
NOTE:
If Single Scan is your selection, you cannot edit the End Freq but only the Start
Freq as the appointed scanning frequency.
MOBILE ENTERTAINMENT
16 ENG
DTV PARTS IDENTIFICATION
INFO
Press this button to bring forth the primary program information.
TV
0001
Signal
14:29:08
GD
88%
Stereo
Language 1/1
1
Press this button twice to bring forth the particular program information, and press it
again to exit from this interface .
Program Info
Prog Name
Prog NO .
Lock
Band Width
Hi erarc hy
GD
1
001 Frequency
NO
N/ A
N/ A
N/A
N/A
Modulation
Guard Interval N/A
HP Code Rate N/A
LP Code Rate N/A
Trans mission N/ A
Strength
Quality
90%
88%
AUDIO
Audio channel information displays.
Language 1/1
MOBILE ENTERTAINMENT
ENG 17
USB PLAYBACK OPERATIONS
U SIN G THE U SB PO RT
Only in the DTV status can the USB device be read MP3, JPG, BMP and MPEG
files stored on a USB device can be played via the USB port on the left side of the
unit.
1. If there are both TV and an USB device connected before the unit power on,
there will be a prompt message shown on screen, you can use the remote
control to select media by pressing
and OK keys.
2. If TV is playing prior to the USB device connecting, there will be a prompt
message shown on screen to ask to select media.
DIGITAL
3. During playback of MP3 and MPEG and stop mode of JPG and BMP files ,the
following screen will appear:
a
b
c
Mp3
MP3 ICON
a.
b.
C.
JPG and BMP ICON
MPEG ICON
MOBILE ENTERTAINMENT
18 ENG
USB PLAYBACK OPERATIONS
USE
keys to move the cursor to a folder, a file ,MP3 ICON,
JPEG ICON or MPEG ICON.
Press OK to enter the folder or play the file highlighted.
While viewing JPG and BMP files. Press
picture respectively.
keys will rotate or flip
During USB files playback, you can control the playback by pressing
keys.
4. If there is an USB device connected, you can enter the select media interface
by pressing the EXIT button during playback of USB or TV.
NOTE:
1. The unit may not work properly it using USB connecting cable. Suggested
not to use it.
2. Support USB 1.1 .
3. The USB function cannot be available at ATV or AV IN station.
MOBILE ENTERTAINMENT
19
ENG
DTV MENU
GEN ERAL STEP S O F SETU P
1.Press the MENU key on the remote control to bring up “main menu”.
There are three classifications: DTV Channel, Configuration and Game .
DTV Ch annel
TV Cha nnel s
Radio Cha nne ls
Pro gram Guide
USB
2.Press and buttons to highlight the icon of the desired page, then press the
Down or Up button to activate that page.
GAME
Bo xMan
Bu rnin g Tetris
Hit Rat
3.Press and buttons to highlight the desired option. Press OK to select.
GAME
Bo xMan
Bu rnin g Tetris
Hit Rat
4.You can press SETUP or EXIT again to exit MENU.
MOBILE ENTERTAINMENT
20 ENG
DTV CHANNEL
19
TV CH A N N ELS AN D RADI O C HA N N ELS
There are two different kinds of channels: TV Channels and Radio Channels.
You can manage the current channels by labeling your favorites, deleting the
non-favorites, moving the program's order and locking the channels. The default
is FAVORITE.If there are no programs saved in the database when entering TV
"
"
Channels or Radio Channels, the prompt message “No TV channels. or No
radio channels.” will pop out and disappear within several seconds.
DTV Channel
TV Chann el s
Rad io Chan nel s
Progra m G uide
US B
FAVO R ITE
If you often watch some specific programs and wish to get to these programs
quickly, you can label these to be your favorites through the program
management actions. You can enter the FAVORITE interface by pressing the F2
button on the remote control at the program management menu status. Exit after
finishing the favorite programs selection action, you can use the remote control
to select your favorite program conveniently.
TV CHA NNELS
FAVORITE
001
A
002
003
B
C
Press OK to select
D EL FAV
M OVE
LOCK
MOBILE ENTERTAINMENT
ENG 21
DTV CHANNEL
You can use and buttons to select any programs at FAVORITE management
status.
If the selected program is not labeled with the FAVORITE symbol, you can set it as
your favorite program by pressing the OK button and the FAVORITE symbol will
appear behind the program name.
If the selected program has already been labeled, press the OK button to cancel the
symbol.
You can set multi-program to be your favorites at the same time.
DELETE
If you don't like some specific programs, you can label these to be DEL programs
through the program management actions. You can enter the DELETE interface
by pressing the F1(Red) button on the remote control at program management
menu status.
TV CHA NNELS
FAV ORITE
A
002
003
B
C
Press OK to select
D EL FAV
M OVE
LOCK
You can use and buttons to select any programs at DELETE management status.
If the selected program is not labeled with the DELETE symbol, you can set it as the
DEL program by pressing the OK button and the DELETE symbol will substitute the
original program serial number.
If the selected program has already been labeled, press the OK button to resume the
original program serial number.
You can set multi-program to be DEL programs at the same time.
MOBILE ENTERTAINMENT
22 ENG
DTV CHANNEL
MOVE
If you want to rearrange the program's order, you can carry out the actions through
the program management actions. You can enter the MOVE interface by pressing
the F3 button on the remote control at program management menu status.
TV CHA NNELS
MOVE
A
002
003
B
C
Press OK to select
D EL FAV
M OVE
LOCK
You can use and buttons to select one program when at MOVE management
status and press the OK button to label them. Then the MOVE icon will substitute
the program serial number. You can press the OK button again to cancel the
proceeding.
After choosing the to-be-moved program, you can use the or button to choose the
position where you want to move the selected program to and confirm it by pressing
the OK button. The selected program will be moved and all the serial numbers of the
programs will be renewed accordingly.
When finishing the action, the MOVE symbol will disappear.
You can move the program serial number as much as you wish to get the complete
satisfactory program order.
LO CK
If you don't want your children to get to some specific programs, you can lock
these programs by an appointed password. You can enter the LOCK interface
by pressing the F4(Blue) button on the remote control at program management
menu status.
MOBILE ENTERTAINMENT
ENG 23
DTV CHANNEL
TV CHANNELS
MOVE
A
B
C
No or bad signal!
002
003
Passwor d
Press OK to select
DEL
FAV
MOVE
LOCK
TV CHANNELS
LOCK
001
A
002
003
B
C
Press OK to select
DEL FAV
MOVE
LOCK
Before entering the program management menu, you have to input the right
password. The default is 0000. If you want to change the password, please refer
to "Password". If you forget the password, always use 0000 to unlock.
You can use and buttons to select any programs at LOCK management status
and press the OK button to label them.
If the selected program is not labeled with the LOCK symbol, you can lock it by
pressing the OK button and the LOCK symbol will appear behind the program name.
If the selected program has already been labeled, press the OK button again to
cancel the symbol.
The locked program can be watched in the LOCK program management menu.
However, you have to enter the password to watch the locked program in any
other states.
MOBILE ENTERTAINMENT
24 ENG
DTV CONFIGURATION
Choose “Configuration” item and you will see that there are three options for
selecting:
System Setting, Auto Scan and Manual Scan.
Config uration
Syst em Settin g
Auto Sca n
Ma nual Sca n
SYSTEM SETTIN G
Use and buttons to select your need. Then press OK key to bring forth all the
options for selecting.
OSD LANGUAGE
Seven available OSD languages:
Eng lish
De utsc h
Config uration
Esp a n o l
Syst em Settin g
Auto Sca n
Ma nual Sca n
OSD L ang uage
Screen Fo rma t
TV T ype
Sta rt Ch anne l
Set ScanArea
Acti ve An te nna
Password
Eng lish
Deu ts ch
Espa nol
Franca is
Fra nc a is
Portug ue s
Ita lia n o
Portugu es
^
Italia no
Ned er lands
Default
Ne d e rla nd s
The default is English.
SCREEN FORMAT
Choose the right screen format depending on your equipment. Three options for
choosing:
MOBILE ENTERTAINMENT
ENG 25
DTV CONFIGURATION
4:3 PS (Pa n & Sc a n)
4:3 LB(Le tte r Box)
16 :9 (Wid e Sc re e n)
Configuration
Syst em Se tting
Auto Sc an
Ma nual Sca n
OSD Lan guage
Screen Format
TV Type
Sta rt Channel
Set ScanArea
Active Antenna
Password
4: 3PS
4: 3LB
16:9
Default
NOTE:
If the screen format is incorrectly set, the images on the screen might
be distorted or clipped out. Therefore, adjust the screen format wisely
in order to get the perfect video display.
The default is 4:3PS.
TV Type
Select the TV type. (Auto means the output signal format will be changed
automatically according to the received signal.)
NTSC
Configuration
PAL60
Syst em Se tting
Auto Sc an
OSD Lan guage
Screen Format
TV Type
Sta rt Channel
Set ScanArea
Active Antenna
Password
PAL
Ma nual Sca n
NT SC
PAL60
PAL
AUTO
AU TO
Default
The default is AUTO.
Start Channel
If you want to watch the same channel each time the unit is turned on, you can
set the First Channel here.
Configuration
Syst em Se tting
Auto Sc an
Ma nual Sca n
OSD Lan guage
Screen Format
TV Type
Sta rt Channel
Set ScanArea
Active Antenna
Password
Default
MOBILE ENTERTAINMENT
26 ENG
DTV CONFIGURATION
After pressing OK in the Start Channel state, the following picture will appear:
Message Box
Enable/Disable
Start Channel Setting
YES
NO
Choose “YES” to show all the channels for selecting or “NO” to exit.
Choose Program
01
02
03
04
A
B
C
D
You have to select one of them to be the First Channel when the unit is turned
on. The default is NO.
The selection action will be saved and become effective when turning on the
unit next time.
The First Channel will be closed automatically if the selected channel is
deleted after the next scanning.
The First Channel will remain to be the same channel even when the First
Channel is moved.
If there is no selected First Channel, the last-playing channel will become the
First Channel when turning on the unit next time.
MOBILE ENTERTAINMENT
ENG 27
DTV CONFIGURATION
SET SCAN AREA
Select the proper region according to the place you are located. After setting,
press the AUTO SCAN key to scan the channels going on this region premise.
Ge rm a ny
Eng la n d
Ita ly
Fra nc e
Config uration
Spa in
Syst em Sett in g
Aut o Sca n
OSD L angu age
Sc re en Format
TV T ype
Start Cha nne l
Se t ScanArea
Ac tive An te nna
Pa ssword
Germany
Englan d
Italy
Holla n d
Ta iwa n
China
Ma nual Scan
France
Spain
Holland
Taiwan
Norwa y
Swe d e n
Finla n d
Portug a l
Othe rs
Default
ACTIVE ANTENNA
This funtion will help the unit get a better TV signal with the active antenna turned on.
Config uration
Syst em Sett in g
Aut o Sca n
Ma nual Scan
OSD L angu age
Sc re en Format
TV T ype
Start Cha nne l
Se t ScanArea
Ac tive An te nna
Pa ssword
ON
OF F
Default
The default is ON.
PASSWORD
Renew your password here.
Config uration
Syst em Sett in g
Aut o Sca n
OSD L angu age
Sc re en Format
TV T ype
Ma nual Scan
Start Cha nne l
Se t ScanArea
Ac tive An te nna
Pa ssword
Default
MOBILE ENTERTAINMENT
28 ENG
DTV CONFIGURATION
1.Input your old password first.
Old password :
2.Enter the new password.
New password :
*
3.Confirm your new password.
Confi rm :
*
NOTE:
1. If the confirmed password differs from the new password, you have to reenter
them until the two are the same.
2. The default password is 0000.
DEFAULT
Resume the factory settings.
Configuration
OS D Lan guage
Screen F orm at
TV Type
System Se tting
Auto Scan
Manual Sca n
St art C hannel
Set Scan Area
Active Antenn a
Pass word
Defau lt
MOBILE ENTERTAINMENT
ENG 29
DTV CONFIGURATION
After pressing OK in the Default state, the following picture will appear:
Message Box
Reset to default!
OK
Cancel
NOTE:
The default settings action will resume all the factory settings, including the
deletion of all the saved programs.
A UTO SCAN
Auto scanning.
Scanning...
Channel
58
740000KHz
45/57
Strength
Quality
28
0
Frequency
Progress
TV
:
0000
RADIO
:
0000
Press to stop scan
Press EXIT to stop and exit
NOTE:
Press F1(Red) to stop scanning and EXIT button to exit.
M AN UA L SCAN
Please refer to Special Keys.(Page 14)
MOBILE ENTERTAINMENT
30 ENG
GAME
Get to the game function from the main menu. You will find three kinds of games
in DTV state.
GAME
BoxMan
Burn ing Tetri s
Hi t Rat
BO XMA N
Use
appointed place. Only one box can be moved at a time.
,
,
and
buttons to control the little man to move the boxes to the
STEP 0 00 L EV EL
1
Press the MENU key to replay the current game and the OK key to play the
higher level.
Press EXIT to quit at any time.
BURN IN G TETRI S
1. Use and to move Tetris left and right.
2. Press to shift the direction of the Tetris.
3. Press to accelerate the Tetris downwards.
MOBILE ENTERTAINMENT
ENG 31
GAME
L E VE L
1
S COR E 0 0 0 0
Press the MENU key to replay the current game and the OK key to pause/play
the higher level.
Press EXIT to quit at any time.
H IT RA T
Press 1,2,3,4,5,6,7,8,9 to hit the rat according to its corresponding directions of
where it appears on the screen.
Press EXIT to quit at any time.
SCORE 00 LEVEL 1
20
MOBILE ENTERTAINMENT
ENG 33
TECHNICAL INFORMATION
TRO U BLE SH O O TI N G
Phenomenon
Solution
1. Check that the unit has been turned on, and that the
volume wheel is turned up.
2. Please scan channels before watching.
3. Check antenna is connected and working OK.
4. Check setup for correct TV regional setting or ATV
system.
No sound
1. Check that the unit has been turned on.
2. Please scan channels before watching.
3. Check antenna is connected and working OK.
No picture
1. This phenomenon may appear when playing with the
low-capacity battery.
Sounds only
with no picture
2. Please recharge the battery fully to be played once
again.
1. This phenomenon may appear when using in a moving
vehicle.
2. Please replace the antenna to another place with a
stronger signal.
Bad image
3. Check that the settings of the TV system are right.
1. Position the volume setting of the unit to a suitable
level.
Low volume
No channel
can be
searched
1. The antenna may not be connected well.
2. Wrong regional setting or ATV system.
3. Channels setting may be encrypted at your location.
DAMAGE REQUIRING SERVICE
Have the unit serviced by a qualified service technician if:
The unit has been exposed to rain or water.
The unit does not seem to operate normally.
The unit exhibits a marked change in performance.
DO NOT ATTEMPT TO SERVICE THE UNIT BY YOURSELF!
MOBILE ENTERTAINMENT
|
