10. QUALITY CERTIFICATE
LRB 4000CI is suited for usage.
Production date ____________________________
Serial number _____________________________
Operation Manual
Device performance:
Actual data Measured data
Reflective object, m
Non-reflective object, m
Azimuth, °
Elevation, °
RS-232 interface
Pass
Quality Inspector signature___________________
Purchase date _____________________________
Salesman ________________________________
Quality Assurance Seal_____________________
LRB 4000CI
LASER RANGE FINDER BINOCULAR
Newcon International ltd. © 2005 Printed in Canada
In USA: 3310 Prospect Ave. Cleveland, OH 44115
In Canada: 105 Sparks Ave., Toronto, ON M2H 2S5
Download from Www.Somanuals.com. All Manuals Search And Download.
8. WARRANTY
Features of the LRB 4000CI Laser Rangefinder Binocular
NEWCON OPTIK warrants this product against defects in
material and workmanship for one year from the date of the
original date of consumer's purchase, but no more than 18
months from the date of manufacturing. If your Newcon product
proves to be defective during this period, please bring the
product securely packaged in its original container or an
equivalent, along with proof of the date of original purchase, to
your Newcon Dealer. Newcon will repair (or at its option
replace), the product or part thereof, which, on inspection by
Newcon, is found to be defective in materials or workmanship.
•
Latest digital circuitry allows targeting through most types
of glass
First, last or the most reflective target acquisition
Meters/Yards/Mils/Degrees/KMH/MPH display
Last 10 readings recall
Selectable reticle shape (+ or □)
Target quality indicator
Gating capability
•
•
•
•
•
•
•
•
Speed detector, compass, inclinometer
RS-232 computer output
What This Warranty Does Not Cover:
NEWCON is not responsible for warranty service should the
product fail to be properly maintained or fail to function properly
as a result of misuse, abuse, improper installation, neglect,
damage caused by disasters such as fire, flood, lightning,
improper electrical current, or service other than by a NEWCON
Authorized Service. Postage, insurance, or shipping costs
incurred in presenting your NEWCON product for warranty
service are your responsibility. Please include a check or money
order made out to NEWCON OPTIK for the amount of $15.00 to
cover shipping and handling. This covers products shipped in
USA or Canada only.
3
22
Download from Www.Somanuals.com. All Manuals Search And Download.
7. TROUBLESHOOTING
CONTENTS
The range-measuring mode does not work.
Press the Action button again.
1. Brief description
2. Appearance of the device
3. Supplied accessories
4. Technical characteristics
5. Operation instructions
Check that the battery is installed properly. Check the charge of
the battery. Replace it if it is weak.
How can I clear last reading before making next measurement?
Direct the unit’s LCD reticle at the new target, press the Action
button. The new reading will appear.
5.1. Preparing the device for operation
5.2. Measuring procedure
5.3. Mode switching procedure
5.4. Gating distance selection
5.5. Additional display information
5.6. Computer interconnectivity
5.7. Test modes
There are black dots in the image.
A LCD (Liquid Crystal Display) is installed in the optical
channel of the device. Due to manufacturing imperfections in the
production process of the LCD, small black dots, scratches and
other blemishes might be visible. Those blemishes are strictly
regulated for maximum allowed number, size and location. It
does not degrade the product's performance.
6. Storage and maintenance instructions
7. Troubleshooting
8. Warranty
Range measurement cannot be obtained.
9. Customer Support
•
Check if range detection mode is activated (message
READY appears on the LCD display)
10. Quality certificate
•
•
Check if Active Button is pressed
Make sure that neither your hand or finger is blocking
objective lenses, Laser emitting lens or Receiver lens.
Check if the unit is steady while pressing Action button.
Check if gating mode is off
4
•
•
21
Download from Www.Somanuals.com. All Manuals Search And Download.
6. STORAGE AND MAINTENANCE INSTRUCTIONS.
CAREFULLY READ ALL THE INSTRUCTIONS BEFORE
USING!
Precautions: LRB is a sophisticated precision optical instrument
equipped with electronics. Therefore, it should be handled with
due care.
FAILURE TO OBEY THE INSTRUCTIONS WILL VOID
THE WARRANTY!
•
Keep your device away from direct sunlight, impacts, dust,
moisture, and sudden changes of temperatures.
Do not keep the device at temperatures higher than 65oC
(149oF).
•
1. BRIEF DESCRIPTION
•
Do not touch the optical surfaces with fingers. Doing so
may damage the anti-reflection coating.
LRB 4000CI Laser Rangefinder Binocular is the advanced
Laser Range Finder system that provides instant distance, speed,
and angular measuring consistently and accurately. The
outstanding optics provides a sharp, clear image under all
conditions. LRB utilizes a revolutionary digital design, which
outperforms any other product in its class and price range.
•
•
Avoid shocks and sharp jolts.
Cleaning of optical surfaces is only allowed with
professional camera lens cleaning supplies.
•
•
•
To clean the exterior of the device, use a soft clean cloth.
Keep away from heating appliances and central heating.
Remove the battery when storing the device for long period
of time.
The unit sends an invisible, eye safe laser beam pulses to the
target. The returned beams are captured by the digital circuitry.
The time differential allows us to calculate the distance to the
target. Built-in digital compass measures angle between the
optical axis and direction to the North Pole. Built-in inclinometer
allows elevation angle measuring together with height (depth)
calculations.
•
The manufacturer only can make repair works.
20
5
Download from Www.Somanuals.com. All Manuals Search And Download.
2. APPEARANCE OF THE DEVICE
5.6. Computer interconnectivity
The unit is equipped with standard RS-232 interface. The data is
transmitted as ASCII code with fixed baud rate of 9600 bit/sec.
5.7. Test modes
4
Mode 16 is designated to test the display. When you choose
this mode all segments and indicators will flash during 8
seconds. This time should be enough for extensive display
testing.
6
7
1
Mode 17 calibrates the digital compass. If the System was
exposed to a strong magnetic field or it was inoperable for a long
time the compass stops working. This is normal. To return the
compass back into working condition, enter Mode 17 and rotate
the unit several times around vertical axle, holding it
horizontally.
5
8
45°
45°
3
Repeat this
operation,
2
holding the
unit at 45
degrees to the
horizon up and
360°
360°
360°
1 – Eyepieces; 2 – Objective lens – receiving lens; 3 – Objective lens -
emitting lens; 4 – Dioptric correction rings; 5 – Mode button; 6 –
Action button; 7 – Body of the device; 8 – Rubber grip
down. The normal compass operation will be restored.
19
Fig. 1
6
Download from Www.Somanuals.com. All Manuals Search And Download.
There are four statistical qualifications of the reflected signal:
•
•
•
NO TARGET REFLECTION – when a steady reflected
signal isn’t received. Numerical display shows four dashes at
the distance displaying area;
TARGET REFLECTION LOW – when the number of
steady received reflected signals is just enough to make
acceptable conclusion about the measured distance;
TARGET REFLECTION MED - when the number of
steady received reflected signals is in medium range and
enough to make positive conclusion about the measured
distance;
1
9
1
10
1 – Eyepiece; 9 – – Interpupilary distance adjustment lever; 10 –
Battery compartment cover and identification label (located at the
bottom)
•
TARGET REFLECTION HIGH - when the number of
steady received reflected signals is qualified to be enough to
make reliable conclusion about the measured distance.
The displayed statistical qualification of the reflected signal
characterizes variation in expected accuracy of measurements. At
qualification HIGH the accuracy of measurements is stated as
±1m ± 0.1%. At lower rates of statistical qualification the
expected accuracy may marginally degrade.
Fig. 2
3. SUPPLIED ACCESSORIES
LRB is supplied in the following assembly:
The display presents message LOW BAT – when voltage of
the primary 9-volt battery drops below 7.2 volt. At this point the
System is still functional but the battery should be replaced as
soon as possible. The System can operate at the voltage level
above 7 volt. Alkaline or lithium type of batteries capable to
sustain current drain up to 150 mA should be used for powering
the System.
- Device
- Carrying case
- Neck strap
- User’s manual
- Warranty card
- Computer cable
- Floppy disk (optional)
- 9V battery (optional)
1 pc.
1 pc.
1 pc.
1 pc.
1 pc.
1 pc.
1 pc.
1 pc.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
7
4. TECHNICAL CHARACTERISTICS
1. Optics
Magnification, x
7
Objective Lens, mm
Exit Pupil Diameter, mm
Field of View
50
7.1
5°
Type of Coating
Fully multi-coated optics
Interpupilary distance, mm
Diopter adjustment range
Axial Resolution, ”
Image tilt, maximum
58-72
±4
6
-
-
Horizontal
Vertical
60”
30”
2. Range Finder
Type
Class 1, eye safe, 905nm
Measuring Range, m
Accuracy
'Last Target' measurement
Meters/Yards display
Last 10 readings recall
Reticle shape
20 – 4,000
± 1m ± 0.1%
Yes
Yes
Yes
+ or
ٱ Yes
Target quality indicator
Gating capability, m
100 - 7,000; 100 m step
5 – 400 / 3-250
± 1
3. Speed Detection Measured speed range, kmh / mph
Accuracy, kmH
4. Compass
Measured azimuth range, mils/deg
Accuracy, degrees
6400 / 360
±1
5. Inclinometer
Measured elevation range, degrees
Accuracy, degrees
±60
±0.4
Height measuring
Yes
6. Misc.
Battery (optional)
'Low Battery' Indicator
Tripod thread
9 V
Yes
¼” x 20
Operational Temperature Range
Storage Temperature Range
Weight without battery, g
Dimensions, mm
-25 / +50oC (-13 / +122oF)
-45 / +65oC (-49 / +149oF)
1300
210 x 150 x 80
8
Download from Www.Somanuals.com. All Manuals Search And Download.
M/° - units of angular measurement: mils or degrees
Shape of the reticle: cross shape or rectangular shape (2).
rEC1 - recall function. Upon pressing the Action button (6) (fig.
1) the Display will sequentially show results of last 10
measurements, starting from the latest one. The number
appearing after word "rEC" shows the number of the
measurement counted back in the sequence. When the System is
in inactive state the 10 previous measurements are stored within
the System and may be recalled at any time.
cLr - clear data function: upon pressing the Action button (6)
(fig. 1) the entire data on all previous measurements will be
erased. This function doesn’t change the chosen modes. You can
erase the assigned mode only by assigning a new one.
Note: After changing a battery the recall stack should be
cleared by exercising the cLr mode.
5.4. Gating distance selection
You can exclude all targets, which are closer than the preset
distance. This is useful when you aim your target through bushes
or wires, or you are not interested in targets closer than a certain
distance. The step of gating is 100 meters starting from 100
meters and up to 7000 meters (such a large maximum gating
distance is reserved for future extensions). This means that you
potentially can set the gating distance larger than the maximum
measuring range. The device will not be able to measure
anything in this regime. To remove gating mode you should
choose Standard1 or Standard2 modes.
Note: The gating distance can be increased only. If you want to
decrease it, you should remove gating mode and then choose it
again.
Note: You can exit gating selection cycle without gating
distance setting by clicking the M button 70 times (all possible
gating distances passed, nothing was chosen) or by holding the
M button during 2 seconds (“escape” function, see above).
OVER 100 – indicates that gating mode is on.
Distance measuring procedure includes instant statistical
processing of the package of single measuring sessions for each
laser pulse. Qualitative result of the statistical processing is
presented on the Display as a message TARGET
REFLECTION (5).
5.5. Additional display information
The System operates in the setting Modes that are displayed as
follows (refer to Fig.3):
17
Y/M – units of measurement: yards or meters (3).
KMH/MPH – units of speed measurement: km/hour or
miles/hour (3).
16
Download from Www.Somanuals.com. All Manuals Search And Download.
5. OPERATION INSTRUCTIONS
Liquid Crystal Display (LCD)
5.1. Preparing the device for operation.
•
Open battery compartment cover (10) (Fig. 2).
Insert one 9V battery (sold separately) into the battery
compartment observing correct polarity.
•
•
Close the battery compartment cover (10), tighten the screw.
6
8
1
After changing the battery, it is recommended to run the cLr
(CLEAR) mode and Compass Calibration mode (refer mode
selection procedure).
5
5.2. Measuring procedure
When the Rangefinder is in the passive, zero power consumption
state, the LCD Display is blank (transparent). Press the A button
(6) (Fig.1) and hold for 0.5 sec. to activate the System and the
Display. Initially the System always assumes READY mode of
operation and word ‘READY’ appears on the Display.
Pressing and releasing A button (6) (Fig. 1) at this point triggers
a measuring session, and the result will be displayed in
numerical form (4) (if measurement is unsuccessful then four
dashes ‘----‘ will appear in the numerical area). Please note that
the target must be over 20m away. The measured data will
correspond to the mode selected (see below). The units of
measurement will be indicated in the field (3) (Fig.3). If you
choose more than one parameter to measure (for instance,
distance and azimuth) the measured results will appear on the
display every half second. The System remains in the active
displaying state for 8 seconds after pressing of any of the
10
9
2
4
3
1 – Low battery indicator; 2 – Reticle (cross or rectangular selectable);
3 – Units of measurement (Yards, Meters, KMH,
MPH, Mils or Degrees); 4 – Measurement result;
5 – Target quality indicator; 6 – Laser active indicator
7 – Over 100m gating indicator, 8 – Setup mode indicator, 9 – Ready
mode indicator
Fig. 3
9
Download from Www.Somanuals.com. All Manuals Search And Download.
override reticle type and target selection with the sub selection
code. For example, Standard 1 mode implies cross reticle. If you
choose rectangular reticle (sub selection code 10), you change
the reticle shape and leave all other parameters of this mode
intact. If then you choose Standard1 again, the reticle will turn
back crosshair. The last set mode overwrites all features that it
controls.
The third standard mode is assigned to Code 8. It determines
measurement units and features as Yards, Degrees, Degrees,
Crosshair reticle, Auto target selection.
All other modes determine only one parameter to measure. For
example, Code 14 allows to measure speed of the objects as
kilometers per hour. The shape of reticle and target selection will
remain the same, as they had been set before you selected the
Code 14. Now you can choose a new reticle shape, still
remaining in the speed measuring mode. This example
demonstrates that Codes 9-13 replace one selected feature
independently, and all other codes can replace more than one
feature in a bunch.
If you want to leave the mode switching procedure without
remembering your choice, you should press and keep held the M
button for more than two seconds. This works like “Escape” key
on a computer keyboard. The rangefinder will remain in the last
set mode and return to the READY state.
Full trek of all possible modes available is depicted on Figure 4.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
The mode selection logic allows choosing the nearest (‘first’),
the farthest (‘last’) or the most reflective (‘auto’) target. Besides,
you can exclude all targets that are closer than the predefined
distance (gating distance selection, see below).
operating buttons and after 8 seconds enters the passive zero
power state.
Note: If you set the gating distance larger than any accessible
target, you will be unable to obtain any result even if the target
reflection is high (see below).
5.3. Mode switching procedure
If the A button is held (pressed) the System automatically
enters SCANNING mode. At this mode, the System repetitively
performs distance measuring and displaying. The time interval
between measurements is approximately 0.25 second.
By pressing M button (5) (Fig.1) when the System is in READY
mode, you enter the Mode selecting state. Pressing the M button
sequentially scans the Modes. The Mode under selection is
indicated on the Display by flashing of the selectable feature.
The "flashing" feature can be selected by pressing the A button
(6). If you don’t find some of the modes described below, it
means they were not installed on your system. Two modes,
“Codes” and “Recall” have submenus. You enter submenu by
pressing the A button from the corresponding mode. After that
you can select the sub-item with M button and choose your
option by pressing the A button. Each time when you make your
choice, you return to the READY state.
Note: Depending on user’s requirements, the unit can be made
with a special sub selection, providing only the options required
for the particular task.
Note: Depending on the software installed the situation when
the mode is accessible but inoperable also may occur.
There are two preset modes, Standard1 (Meters, Degrees,
Degrees, Crosshair reticle, Auto target selection) and Standard2,
which open the mode trek. After you have selected it, you can
14
The maximum measuring distance range for most objects will
be about 4000 meters. Ideally reflecting objects can be measured
at 4500 meters distance. The maximum measured distance varies
greatly depending on the reflectivity of the target, weather
conditions and more.
Target reflectivity depends on its color, surface finish, shape
etc. Bright colors are more reflective than darks. A polished
surface is more reflective than a rough one. Larger targets are
easier for distance measuring. Measuring a target faced at 90o
(perpendicular to the laser beams path) provides optimal results.
Bad weather conditions (rain, fog, snow, mist) will reduce the
maximum measured range. Bright sunny days will reduce
performance as well. While the unit will work through many
glass types, measuring through glass will affect the results. Hand
tremor also influences the results. Use tripod to measure distance
to far-away objects.
The unit can estimate distance to up to 7 targets simultaneously.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Fig.4 Mode switching trek
A
A
A
A
A
A
A
Select
this mode
Last
Target
M
M
M
Code 11
Code 12
Code 13
Code 14
Code 15
Code 16
Code 17
Go to next
mode
Mode
Screen display
Select
this mode
First
Target
Go to next
mode
Select
this mode
Auto
Target
Auto
Target
A
Select
this mode
M
Meter
Meter
1) Standard 1
Degree Degree
Go to next
mode
,
,
,
,
Go to next
mode
M
Select
this mode
Auto
Target
A
Meter
Yard
KMH
MPH
Select
this mode
M
Mills
Mills
1) Standard 2
3) Codes
Go to next
mode
,
,
Go to next
mode
Select
this mode
M
M
A
Select
this mode
Go into
sub menu
Go to next
mode
A
Select
this mode
M
Code 1
M
Select
this mode
Meter
Yard
Go to next
mode
- self test of the display
- calibration of compass
Go to next
mode
Select
this mode
A
Select
this mode
M
Go to next
mode
M
Go to next
mode
Code 2
Code 3
M
A
Go into
sub menu
A
Select
M
4) Gating
Go to next
step
this mode
Degree
Mills
Select
this mode
A
M
100
200
Go to next
mode
Select
this mode
A
A
M
M
Select
this mode
A
300
Select
this mode
M
Code 4
...
Go to next
mode
Select
this mode
A
A
A
M
M
M
6800
Select
this mode
A
6900
7000
Select
this mode
M
Code 5
Code 6
Degree
Mills
Go to next
mode
A
M
Select
M
A
Go into
sub menu
this mode
Go to next
step
5) Recall
Go to next
mode
A
A
Select
this mode
M
M
Rec1
Rec2
...
Rec9
Select
this mode
A
Select
Vertical
Meter
M
M
M
Code 7
Code 8
Code 9
this mode
Go to next
mode
Select
this mode
A
A
M
M
Select
this mode
Rec0
Auto
Target
A
Select
this mode
Degree
Degree
Yard
Go to next
mode
Select
this mode
M
6) Clear
A
Use previous
settings
Select
this mode
Go to next
mode
“Mode”
button
A
“Action”
button
M
A
Select
this mode
M
Code 10
Go to next
mode
Download from Www.Somanuals.com. All Manuals Search And Download.
|