New Holland
Industrial Dryer Specifications
K-11 K-24 K-90 K-94
MODEL
K-11 Tabletop Dryer
K-24
K-90 K-94
18 in. x 24 in.
46.5 in.
6 in. x 6 in.
19.5 in.
12 in. x 12 in.
36.5 in.
18 in. x 18 in.
40.5 in.
Overall Height
Work Height
Table Space Required
Floor Space Required
Weight
16 1/8 in.
30 1/2 in.
37 in.
43 in.
9 3/8 in. x 14 in.
—
—
—
—
24 in. x 37 in.
400 lbs.
31 in. x 40 in.
615 lbs.
31 in. x 40 in.
690 lbs.
79 lbs.
Operating Speed
Motor Size
1,100 rpm
1/8 hp
825 rpm
1 hp
625 rpm
2 hp
625 rpm
3 hp
Basket Size
6 in. x 6 in.
7 lbs.
12 in. x 12 in.
75 lbs.
18 in. x 18 in.
150 lbs.
18 in. x 24 in.
250 lbs.
Capacity
Bearings
2, sealed ball
No
Direct coupled
Arc-welded steel plate
110/120 VAC 50/60Hz
2, tapered roller
Yes
2, tapered roller
Yes
2, tapered roller
Yes
Reversible Control
Drive
2 V-belts
2 V-belts
2 V-belts
Constuction
Arc-welded steel plate
208, 220, 440, or
550 VAC at 60Hz;
380 VAC at 50Hz; 3-phase
(Optional) electric; steam
Arc-welded steel plate
208, 220, 440, or
550 VAC at 60Hz;
380 VAC at 50Hz; 3-phase
(Optional) electric; steam
Arc-welded steel plate
208, 220, 440, or
550 VAC at 60Hz;
380 VAC at 50Hz; 3-phase
(Optional) electric; steam
Electrical System
Heating Unit
Amperage
600 watts switchable electric
Starting: 10.1/10.4
Starting and operating amperage Starting and operating amperage Starting and operating amperage
Operating: 6.7/7.1
varies with voltage selected
varies with voltage selected
varies with voltage selected
Meets N.E.C. Specifications
U.L. Recognized
Yes
Yes
None
—
Yes
Yes
Exposed
Yes
Yes
Yes
Exposed
Yes
Yes
Yes
Exposed
Yes
Grease Fittings
Meets J.I.C. Specifications
OPTIONS
Soft Start
—
—
—
—
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Variable Speed
Timer
Temperature Control
For more information or to find an authorized New Holland industrial dryer
distributor, contact us at:
CNH America LLC
P.O. Box 1895, M.S. 237
New Holland, PA 17557-0903
Phone: 717-355-4747
Fax: 717-355-3440
or visit our Web site at www.newholland.com/na
Design, materials and/or specifications are subject to
change without notice and without liability therefor.
Specifications are applicable to units sold in Canada, the
United States, its territories and possessions, and may
vary outside these areas.
Safety begins with a thorough understanding of
the equipment. Always make sure you and
your operators read the Operator’s Manual
before using the equipment. Pay close
attention to all safety and operating
decals and never operate machinery
without all shields, protective devices
and structures in place.
Page 1of 1
© 2008 CNH America LLC
Download from Www.Somanuals.com. All Manuals Search And Download.
|